1128 lines
41 KiB
Plaintext
1128 lines
41 KiB
Plaintext
CISCOSB-LLDP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB LLDP ROS
|
|
-- Private LLDP MIB
|
|
-- Version: 7.42
|
|
-- Date: 12 Dec 2005
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
switch001, rndNotifications
|
|
FROM CISCOSB-MIB
|
|
LldpPortList, LldpPortNumber, LldpManAddress, lldpRemEntry, lldpPortConfigEntry
|
|
FROM LLDP-MIB
|
|
PortList
|
|
FROM Q-BRIDGE-MIB
|
|
Dscp
|
|
FROM DIFFSERV-DSCP-TC
|
|
AddressFamilyNumbers
|
|
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
|
|
lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex
|
|
FROM LLDP-MIB
|
|
LldpXMedCapabilities
|
|
FROM LLDP-EXT-MED-MIB
|
|
rndErrorDesc, rndErrorSeverity
|
|
FROM CISCOSB-DEVICEPARAMS-MIB
|
|
lldpV2LocPortIfIndex, lldpV2RemLocalIfIndex
|
|
FROM LLDP-V2-MIB
|
|
InetAddressType, InetAddress, InetVersion
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
rlLldp MODULE-IDENTITY
|
|
LAST-UPDATED "202105190000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol)."
|
|
REVISION "202105190000Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { switch001 110 }
|
|
|
|
rlLldpObjects OBJECT IDENTIFIER ::= { rlLldp 1 }
|
|
|
|
rlLldpConfig OBJECT IDENTIFIER ::= { rlLldpObjects 1 }
|
|
rlLldpXMedConfig OBJECT IDENTIFIER ::= { rlLldpObjects 2 }
|
|
rlLldpTLVsTxOverload OBJECT IDENTIFIER ::= { rlLldpObjects 3 }
|
|
rlLldpRemStatus OBJECT IDENTIFIER ::= { rlLldpObjects 4 }
|
|
rlLldpLocalSystemData OBJECT IDENTIFIER ::= { rlLldpObjects 5 }
|
|
rlLldpRemoteSystemsData OBJECT IDENTIFIER ::= { rlLldpObjects 6 }
|
|
rlLldpV2Config OBJECT IDENTIFIER ::= { rlLldpObjects 7 }
|
|
|
|
PolicyNumber ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy Number in the Media Policy Container.
|
|
|
|
Policy numbers should be in the range of 1 and 32768 since 8 policies
|
|
can be configured for each particular port and the number of ports range is
|
|
1 to 4096."
|
|
SYNTAX Integer32(1..32768)
|
|
|
|
-- Policy Application Type Textual Convention
|
|
|
|
PolicyContainerAppType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media type that defines the primary function of the
|
|
application for the policy advertised by an endpoint.
|
|
|
|
A value of voice(1) indicates that the media type defining
|
|
a primary function of the application for the policy advertised on
|
|
the local port is voice.
|
|
|
|
A value of voiceSignaling(3) indicates that the media type
|
|
defining a primary function of the application for the policy
|
|
advertised on the local port is voice signaling.
|
|
|
|
A value of guestVoice(4) indicates that the media type
|
|
Defining a primary function of the application for the policy
|
|
advertised on the local port is guest voice.
|
|
|
|
A value of guestVoiceSignaling(5) indicates that the media
|
|
type defining a primary function of the application for the policy
|
|
advertised on the local port is guest voice signaling.
|
|
|
|
A value of softPhoneVoice(6) indicates that the media type
|
|
Defining a primary function of the application for the policy
|
|
advertised on the local port is softphone voice.
|
|
|
|
A value of videoConferencing(7) indicates that the media
|
|
type defining a primary function of the application for the policy
|
|
advertised on the local port is voice.
|
|
|
|
A value of streamingVideo(8) indicates that the media type
|
|
defining a primary function of the application for the policy
|
|
advertised on the local port is streaming video.
|
|
|
|
A value of videoSignaling(2) indicates that the media type
|
|
defining a primary function of the application for the policy
|
|
advertised on the local port is video signaling."
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
voice(1),
|
|
voiceSignaling(2),
|
|
guestVoice(3),
|
|
guestVoiceSignaling(4),
|
|
softPhoneVoice(5),
|
|
videoconferencing(6),
|
|
streamingVideo(7),
|
|
videoSignaling(8)
|
|
}
|
|
|
|
|
|
PolicyAppVoiceUpdateMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
SYNTAX INTEGER {
|
|
manual(0),
|
|
auto(1)
|
|
}
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Local Device Configuration 'rlLldpConfig OBJECT IDENTIFIER ::= { rlLldpObjects 1 }'
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this variable to 'true' will globally enable the LLDP feature
|
|
(both transmit and receive functionalities). Setting this variable
|
|
to 'false' will globally disable the LLDP feature. Thus, the
|
|
administratively desired status of a local port is determined by
|
|
both this variable and the MIB lldpPortConfigAdminStatus."
|
|
::= { rlLldpConfig 1 }
|
|
|
|
rlLldpClearRx OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ports that are identified by a PortList, in which
|
|
each port is represented as a bit.
|
|
Clears the Rx information about the remote agents accordingly to the
|
|
specified PortList.
|
|
The default value for rlLldpClearRx object is an empty binary string,
|
|
which means no ports are specified to be cleared from the Rx Info.
|
|
This object behaviors as an event (write-only) than
|
|
reading this object always results in an Empty Port List of length zero."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { ''H } -- empty octet string
|
|
::= { rlLldpConfig 2 }
|
|
|
|
rlLldpDuMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filtering(1),
|
|
flooding(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action with LLDPDU upon globally disabled LLDP.
|
|
|
|
If the associated rlLldpDuMode object has a value of
|
|
'filtering(1)', then received frames are containing LLDPDU
|
|
will be dropped.
|
|
|
|
If the associated rlLldpDuMode object has a value of
|
|
'flooding(2)', then received frames are containing LLDPDU
|
|
will flood all active ports."
|
|
REFERENCE
|
|
"Cisco LLDP System Specifications"
|
|
DEFVAL { filtering }
|
|
::= { rlLldpConfig 3 }
|
|
|
|
rlLldpAutoAdvLocPortManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpAutoAdvLocPortManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains automaticaly selected management address,
|
|
advertised on the local port."
|
|
REFERENCE
|
|
"Cisco LLDP"
|
|
::= { rlLldpConfig 4 }
|
|
|
|
rlLldpAutoAdvLocPortManAddrEntry OBJECT-TYPE
|
|
SYNTAX RlLldpAutoAdvLocPortManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a local port, which advertises the Management
|
|
address automatically. Entry also included an interface number, on
|
|
which the Management address is assigned.
|
|
Each management address should have distinct 'management address
|
|
type' (rlLldpAutoAdvManAddrSubtype) and 'management address'
|
|
(rlLldpAutoAdvManAddr)."
|
|
|
|
INDEX { rlLldpAutoAdvLocPortNum }
|
|
::= { rlLldpAutoAdvLocPortManAddrTable 1 }
|
|
|
|
RlLldpAutoAdvLocPortManAddrEntry ::= SEQUENCE {
|
|
rlLldpAutoAdvLocPortNum LldpPortNumber,
|
|
rlLldpAutoAdvManAddrOwnerIfId Integer32,
|
|
rlLldpAutoAdvManAddrNone TruthValue,
|
|
rlLldpAutoAdvManAddrSubtype AddressFamilyNumbers,
|
|
rlLldpAutoAdvManAddr LldpManAddress,
|
|
rlLldpAutoAdvPortsStatus RowStatus
|
|
}
|
|
|
|
rlLldpAutoAdvLocPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
|
|
The value of this object is used as a port index to the
|
|
rlLldpAutoAdvLocPortManAddrTable."
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 1 }
|
|
|
|
rlLldpAutoAdvManAddrOwnerIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value is used to identify the interface number
|
|
(port, trunk or vlan). The management address, automatically
|
|
advertised from associated 'rlLldpAutoAdvLocPortNum'local port is
|
|
assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface.
|
|
In case of 0 the management address is automatically calculated
|
|
without care to the ifIndex it was defined on."
|
|
DEFVAL { 0 }
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 2 }
|
|
|
|
rlLldpAutoAdvManAddrNone OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that the any management address hasn't advertised
|
|
by the local port. Moreover, the configuration of automatic management address
|
|
advertisment is disabled.
|
|
A value of 'false' indicates that the configuration of automatic management address
|
|
advertisment is enabled."
|
|
DEFVAL { false }
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 3 }
|
|
|
|
rlLldpAutoAdvManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'rlLldpAutoAdvManAddr' object."
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 4 }
|
|
|
|
rlLldpAutoAdvManAddr OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address is
|
|
automaticaly advertised by local port, and assigned on the
|
|
associated 'rlLldpAutoAdvManAddrOwnerIfId' interface."
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 5 }
|
|
|
|
rlLldpAutoAdvPortsStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { rlLldpAutoAdvLocPortManAddrEntry 6 }
|
|
|
|
rlLldpChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
macAddress(4),
|
|
local(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis
|
|
associated with the local system."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 9.5.2.2"
|
|
DEFVAL { macAddress }
|
|
::= { rlLldpConfig 5 }
|
|
|
|
|
|
rlLldpPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information that controls the transmission of
|
|
non-standard TLVs on LLDP transmission capable ports.
|
|
|
|
This configuration object augments the lldpPortConfigEntry of
|
|
the LLDP-MIB, therefore it is only present along with the port
|
|
configuration defined by the associated lldpPortConfigEntry entry."
|
|
::= { rlLldpConfig 6 }
|
|
|
|
rlLldpPortConfigEntry OBJECT-TYPE
|
|
SYNTAX RlLldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in rlLldpConfigTable. Augment the lldpPortConfigEntry."
|
|
AUGMENTS { lldpPortConfigEntry }
|
|
::= { rlLldpPortConfigTable 1 }
|
|
|
|
RlLldpPortConfigEntry ::= SEQUENCE {
|
|
rlLldpPortConfig4wireTxEnable TruthValue,
|
|
rlLldpPortConfigAdvManAddrMode INTEGER,
|
|
rlLldpPortConfigAutoAdvManAddrOwnerIfId Integer32
|
|
}
|
|
|
|
rlLldpPortConfig4wireTxEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rlLldpPortConfigTLVsTxEnable, which is defined as
|
|
a truth value and configured by the network management,
|
|
determines whether the 4-wire-poe TLV is allowed on a given LLDP
|
|
transmission capable port."
|
|
DEFVAL { false }
|
|
::= { rlLldpPortConfigEntry 1 }
|
|
|
|
|
|
rlLldpPortConfigAdvManAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (0),
|
|
none (1),
|
|
auto (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that management address TLV does not been advertised
|
|
by the local port. Moreover, the configuration of automatic management address
|
|
advertisment is disabled.
|
|
A value of 'false' indicates that management address being advertised,
|
|
either by automatic mechanism or by user-defined management address."
|
|
DEFVAL { 0 }
|
|
::= { rlLldpPortConfigEntry 2 }
|
|
|
|
rlLldpPortConfigAutoAdvManAddrOwnerIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value is used to identify the interface number
|
|
(port, trunk or vlan) that the port will advertise its management addresses.
|
|
Value 0 means that the management address will be taken from the port that advertise."
|
|
DEFVAL { 0 }
|
|
::= { rlLldpPortConfigEntry 3 }
|
|
|
|
|
|
rlLldpClearGlobalStatistics OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An action scalar. Clear LLDP Global statistics counters.
|
|
The value in the scalar is not relevant."
|
|
::= { rlLldpConfig 7 }
|
|
|
|
rlLldpClearPortStatistics OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ports that are identified by a PortList, in which
|
|
each port is represented as a bit.
|
|
Clears the LLDP port staistics information accordingly to the
|
|
specified PortList.
|
|
The default value for rlLldpClearPortlStatistics object is an empty binary string,
|
|
which means no ports are specified to be cleared.
|
|
This object behaviors as an event (write-only) than
|
|
reading this object always results in an Empty Port List of length zero."
|
|
DEFVAL { ''H } -- empty octet string
|
|
::= { rlLldpConfig 8 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP-MED - Local Device Configuration
|
|
------------------------------------------------------------------------------
|
|
---
|
|
--- rlLldpXMedLocMediaPolicyContainerTable: Local Media Policy Container
|
|
--- Configuration Table
|
|
---
|
|
---
|
|
rlLldpXMedLocMediaPolicyContainerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpXMedLocMediaPolicyContainerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per policy number
|
|
of media policy container configuration."
|
|
::= { rlLldpXMedConfig 1 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerEntry OBJECT-TYPE
|
|
SYNTAX RlLldpXMedLocMediaPolicyContainerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration of a particular policy in the media policy container."
|
|
INDEX { rlLldpXMedLocMediaPolicyContainerIndex }
|
|
::= { rlLldpXMedLocMediaPolicyContainerTable 1 }
|
|
|
|
RlLldpXMedLocMediaPolicyContainerEntry ::= SEQUENCE {
|
|
rlLldpXMedLocMediaPolicyContainerIndex PolicyNumber,
|
|
rlLldpXMedLocMediaPolicyContainerAppType PolicyContainerAppType,
|
|
rlLldpXMedLocMediaPolicyContainerVlanID Integer32,
|
|
rlLldpXMedLocMediaPolicyContainerPriority Integer32,
|
|
rlLldpXMedLocMediaPolicyContainerDscp Dscp,
|
|
rlLldpXMedLocMediaPolicyContainerUnknown TruthValue,
|
|
rlLldpXMedLocMediaPolicyContainerTagged TruthValue,
|
|
rlLldpXMedLocMediaPolicyContainerPorts PortList,
|
|
rlLldpXMedLocMediaPolicyContainerRowStatus RowStatus
|
|
}
|
|
|
|
rlLldpXMedLocMediaPolicyContainerIndex OBJECT-TYPE
|
|
SYNTAX PolicyNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the Media Policy
|
|
associated with this entry.
|
|
The value of this object is used as a policy number index to the
|
|
rlLldpXMedLocMediaPolicyContainerTable."
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 1 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerAppType OBJECT-TYPE
|
|
SYNTAX PolicyContainerAppType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media type that defines the primary function of the
|
|
application for the policy advertised by an endpoint."
|
|
REFERENCE
|
|
"ANSI/TIA-1057, Section 10.2.3.1"
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 2 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerVlanID OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..4094|4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An extension of the VLAN Identifier for the port,
|
|
as defined in IEEE 802.1P-1998.
|
|
|
|
A value of 1 through 4094 is used to define a valid PVID.
|
|
|
|
A value of 0 shall be used if the device is using priority tagged
|
|
frames, meaning that only the 802.1p priority level is significant
|
|
and the default VID of the ingress port is being used instead.
|
|
|
|
A value of 4095 is reserved for implementation use."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.5"
|
|
DEFVAL { 0 }
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 3 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the 802.1p priority
|
|
which is associated with the given port on the
|
|
local system."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.6 "
|
|
DEFVAL { 0 }
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 4 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the Differentiated Service
|
|
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
|
|
which is associated with the given port on the local system."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.7"
|
|
DEFVAL { 0 }
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 5 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerUnknown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that the
|
|
network policy for the specified application type is
|
|
currently unknown. In this case, the VLAN ID, the
|
|
layer 2 priority and the DSCP value fields are ignored.
|
|
A value of 'false' indicates that this network policy
|
|
is defined "
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.2"
|
|
DEFVAL { false }
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 6 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerTagged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that the application is using a
|
|
tagged VLAN.
|
|
A value of 'false' indicates that for the specific application
|
|
the device either is using an untagged VLAN or does not
|
|
support port based VLAN operation. In this case, both the
|
|
VLAN ID and the Layer 2 priority fields are ignored and
|
|
only the DSCP value has relevance "
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.3"
|
|
DEFVAL { false }
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 7 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ports that are identified by a PortList, in which
|
|
each port is represented as a bit. The local Media Policy Number
|
|
will be associated with (or attached to) the ports specified at
|
|
the rlLldpXMedLocMediaPolicyContainerPorts.
|
|
|
|
The default value for rlLldpXMedLocMediaPolicyContainerPorts object
|
|
is empty binary string, which means no ports are specified
|
|
for advertising indicated management address instance."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 10.2.1.1"
|
|
DEFVAL { ''H } -- empty binary string
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 8 }
|
|
|
|
rlLldpXMedLocMediaPolicyContainerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { rlLldpXMedLocMediaPolicyContainerEntry 9 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - MED Local Voice VLAN update mode
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpXMedNetPolVoiceUpdateMode OBJECT-TYPE
|
|
SYNTAX PolicyAppVoiceUpdateMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpXMedConfig 2 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - MED Operational Status (whether the interface Tx MED TLVs)
|
|
-- Private MIB which enhance lldpXMedPortConfigTable - 'rlLldpXMedPortConfigTbale'
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpXMedPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpXMedPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per policy number
|
|
of media policy container configuration."
|
|
::= { rlLldpXMedConfig 3 }
|
|
|
|
rlLldpXMedPortConfigEntry OBJECT-TYPE
|
|
SYNTAX RlLldpXMedPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration of a particular policy in the media policy container."
|
|
INDEX { lldpPortConfigPortNum }
|
|
::= { rlLldpXMedPortConfigTable 1 }
|
|
|
|
RlLldpXMedPortConfigEntry ::= SEQUENCE {
|
|
rlLldpXMedPortConfigTxOperStatus INTEGER }
|
|
|
|
rlLldpXMedPortConfigTxOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-relevant (0),
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates whether this interface is operational
|
|
transmitted LLDP MED TLVs.
|
|
To transmit MED TLVs, the interface must be MED enabled and must be connected to an LLDP-MED device.
|
|
The switch waits for the LLDP-MED device to advertise its information before the switch transmits its own LLDP-MED TLVs,
|
|
at which point the operational status becomes enabled"
|
|
DEFVAL { 0 }
|
|
::= { rlLldpXMedPortConfigEntry 1 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - TX TLV overloading 'rlLldpTLVsTxOverload'
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
rlLldpTLVsTxOverloadingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that show the which of the LLDP TLVs are not transmitted
|
|
on individual ports due to insufficient room in the frame
|
|
and the size of each TLV."
|
|
::= { rlLldpTLVsTxOverload 1 }
|
|
|
|
|
|
rlLldpTLVsTxOverloadingEntry OBJECT-TYPE
|
|
SYNTAX RlLldpTLVsTxOverloadingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP TX overloading information that shows the
|
|
transmission of TLVs on LLDP transmission capable ports."
|
|
INDEX { rlLldpTxOverloadingPortNum,
|
|
rlLldpTxOverloadingIndex }
|
|
::= { rlLldpTLVsTxOverloadingTable 1 }
|
|
|
|
RlLldpTLVsTxOverloadingEntry ::= SEQUENCE {
|
|
rlLldpTxOverloadingPortNum LldpPortNumber,
|
|
rlLldpTxOverloadingIndex Unsigned32,
|
|
rlLldpTxOverloadingGroupId INTEGER,
|
|
rlLldpTLVsTxSize Unsigned32,
|
|
rlLldpTLVsTxGroupOverloading TruthValue,
|
|
rlLldpTLVsTxLeftSize Unsigned32
|
|
}
|
|
|
|
rlLldpTxOverloadingPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The value of this object is used as a port index to the
|
|
TLVs TX overloading Table ."
|
|
::= { rlLldpTLVsTxOverloadingEntry 1 }
|
|
|
|
rlLldpTxOverloadingIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number of the group into sent LLDP PPDU starting from 1."
|
|
::= { rlLldpTLVsTxOverloadingEntry 2 }
|
|
|
|
rlLldpTxOverloadingGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- LLDP mandatory TLVs
|
|
mandatory(1),
|
|
optional(2),
|
|
-- LLDP MED
|
|
medCap(3),
|
|
medLocation(4),
|
|
medNetPolicy(5),
|
|
medPoe(6),
|
|
-- LLDP MED - Inventory
|
|
medInventory(7),
|
|
-- 802.3 TLVs
|
|
xDot3(8),
|
|
-- 802.1 TLVs
|
|
xDot1(9),
|
|
-- DCBX TLVs
|
|
dcbx(10),
|
|
-- Cisco TLVs
|
|
cisco(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the TLVs groups.
|
|
A value of mandatory(1) defines LLDP mandatory TLVs group
|
|
A value of optinal(2) defines LLDP optional TLVs group
|
|
A value of medCap(3) defines LLDP MED - Capabilities group
|
|
A value of medLocation(4) defines LLDP MED - Location group
|
|
A value of medNetPolicy(5) defines LLDP MED - Network Policy group
|
|
A value of medPoe(6) defines LLDP MED - Extended Power via MDI group
|
|
A value of medInventory(7) defines LLDP MED - Inventory group
|
|
A value of Xdot3(8) defines 802.3 TLVs group
|
|
A value of Xdot1(9) defines 802.1 TLVs group "
|
|
::= { rlLldpTLVsTxOverloadingEntry 3 }
|
|
|
|
rlLldpTLVsTxSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The size of the TLV in Bytes."
|
|
::= { rlLldpTLVsTxOverloadingEntry 4 }
|
|
|
|
rlLldpTLVsTxGroupOverloading OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded
|
|
and the value of left size is negative"
|
|
::= { rlLldpTLVsTxOverloadingEntry 5 }
|
|
|
|
rlLldpTLVsTxLeftSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The size in Bytes of the available space left in the LLDPDU after adding the TLVs group.
|
|
In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for the TLVs group
|
|
and this is the size of the additional scpace that required for the TLVs group"
|
|
|
|
::= { rlLldpTLVsTxOverloadingEntry 6 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - TX TLV overloading Size
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpTLVsTxOverloadingSizeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that show the total size of the all TLVs
|
|
and the LLDPDU free size ."
|
|
::= { rlLldpTLVsTxOverload 2 }
|
|
|
|
rlLldpTLVsTxOverloadingSizeEntry OBJECT-TYPE
|
|
SYNTAX RlLldpTLVsTxOverloadingSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP TX overloading information"
|
|
INDEX { rlLldpTxOverloadingPortNum }
|
|
::= { rlLldpTLVsTxOverloadingSizeTable 1 }
|
|
|
|
RlLldpTLVsTxOverloadingSizeEntry ::= SEQUENCE {
|
|
|
|
-- LLDP Total and Left Size
|
|
rlLldpTotalTLVsTxSize Unsigned32,
|
|
rlLldpTLVsTxOverloading TruthValue,
|
|
rlLldpLeftTLVsTxSize Unsigned32
|
|
}
|
|
|
|
rlLldpTotalTLVsTxSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Total size of all TLVs group in Bytes."
|
|
::= { rlLldpTLVsTxOverloadingSizeEntry 2 }
|
|
|
|
rlLldpTLVsTxOverloading OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded
|
|
and the value of left size is negative"
|
|
::= { rlLldpTLVsTxOverloadingSizeEntry 3 }
|
|
|
|
rlLldpLeftTLVsTxSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The size in Bytes of the available space left in the LLDPDU after adding all TLVs group.
|
|
In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for all the TLVs group
|
|
and this is the size of the additional scpace that required for all the TLVs group"
|
|
::= { rlLldpTLVsTxOverloadingSizeEntry 4 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - TX TLV overloading port list
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpTLVsTxOverloadingPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port list that represent the overloading state of each port"
|
|
::= { rlLldpTLVsTxOverload 3 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - TX TLV overloading trap
|
|
------------------------------------------------------------------------------
|
|
rlLldpTLVsTxOverloadingStateEnterTrap NOTIFICATION-TYPE
|
|
OBJECTS { rndErrorDesc, rndErrorSeverity }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Informational trap indicating that the port has entered the overloading state."
|
|
::= { rndNotifications 209 }
|
|
|
|
rlLldpTLVsTxOverloadingStateExitTrap NOTIFICATION-TYPE
|
|
OBJECTS { rndErrorDesc, rndErrorSeverity }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Informational trap indicating that the port is no longer in the overloading state.."
|
|
::= { rndNotifications 210 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP - Remote Time to Live
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpRemTtlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpRemTtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the remote device Time To Live LLDP TLV."
|
|
::= { rlLldpRemStatus 1 }
|
|
|
|
rlLldpRemTtlEntry OBJECT-TYPE
|
|
SYNTAX RlLldpRemTtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP Time To TTL remove TLV.
|
|
This uses the key as defind in lldpRemTable of the LLDP-MIB."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex }
|
|
::= { rlLldpRemTtlTable 1 }
|
|
|
|
RlLldpRemTtlEntry ::= SEQUENCE {
|
|
rlLldpRemTtl Unsigned32
|
|
}
|
|
|
|
rlLldpRemTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the remote device Time To Live LLDP TLV."
|
|
::= { rlLldpRemTtlEntry 1 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpLocalSystemData OBJECT IDENTIFIER ::= { rlLldpObjects 5 }
|
|
------------------------------------------------------------------------------
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpLoc4WirePowerTable
|
|
------------------------------------------------------------------------------
|
|
rlLldpLoc4WirePowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpLoc4WirePowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of power ethernet
|
|
information "
|
|
::= { rlLldpLocalSystemData 1 }
|
|
|
|
rlLldpLoc4WirePowerEntry OBJECT-TYPE
|
|
SYNTAX RlLldpLoc4WirePowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component."
|
|
INDEX { lldpV2LocPortIfIndex }
|
|
::= { rlLldpLoc4WirePowerTable 1 }
|
|
|
|
RlLldpLoc4WirePowerEntry ::= SEQUENCE {
|
|
rlLldpLoc4WirePowerSupported TruthValue,
|
|
rlLldpLoc4WirePowerSpPairDetClasReq TruthValue,
|
|
rlLldpLoc4WirePowerPdSpPairDesStEn TruthValue,
|
|
rlLldpLoc4WirePowerPseSpPairOpStEn TruthValue
|
|
}
|
|
|
|
rlLldpLoc4WirePowerSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpLoc4WirePowerEntry 1 }
|
|
|
|
rlLldpLoc4WirePowerSpPairDetClasReq OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpLoc4WirePowerEntry 2 }
|
|
|
|
rlLldpLoc4WirePowerPdSpPairDesStEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpLoc4WirePowerEntry 3 }
|
|
|
|
rlLldpLoc4WirePowerPseSpPairOpStEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpLoc4WirePowerEntry 4 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpRemoteSystemsData OBJECT IDENTIFIER ::= { rlLldpObjects 6 }
|
|
------------------------------------------------------------------------------
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpRem4WirePowerTable MIB_rlLldpRem4WirePowerEntry_CNS
|
|
------------------------------------------------------------------------------
|
|
rlLldpRem4WirePowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpRem4WirePowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of power ethernet
|
|
information "
|
|
::= { rlLldpRemoteSystemsData 1 }
|
|
|
|
rlLldpRem4WirePowerEntry OBJECT-TYPE
|
|
SYNTAX RlLldpRem4WirePowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component."
|
|
INDEX {
|
|
lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex
|
|
}
|
|
::= { rlLldpRem4WirePowerTable 1 }
|
|
|
|
RlLldpRem4WirePowerEntry ::= SEQUENCE {
|
|
rlLldpRem4WirePowerSupported TruthValue,
|
|
rlLldpRem4WirePowerSpPairDetClasReq TruthValue,
|
|
rlLldpRem4WirePowerPdSpPairDesStEn TruthValue,
|
|
rlLldpRem4WirePowerPseSpPairOpStEn TruthValue
|
|
}
|
|
|
|
rlLldpRem4WirePowerSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpRem4WirePowerEntry 1 }
|
|
|
|
rlLldpRem4WirePowerSpPairDetClasReq OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpRem4WirePowerEntry 2 }
|
|
|
|
rlLldpRem4WirePowerPdSpPairDesStEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpRem4WirePowerEntry 3 }
|
|
|
|
rlLldpRem4WirePowerPseSpPairOpStEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { rlLldpRem4WirePowerEntry 4 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpRemTable Augment to lldpRemTable
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpRemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RllldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table is AUGMENT for lldpRemTable. Each entry consists Source MAC address."
|
|
::= { rlLldpRemoteSystemsData 2 }
|
|
|
|
rlLldpRemEntry OBJECT-TYPE
|
|
SYNTAX RllldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry that consists source MAC address of the remote station."
|
|
AUGMENTS { lldpRemEntry }
|
|
::= { rlLldpRemTable 1 }
|
|
|
|
RllldpRemEntry ::= SEQUENCE {
|
|
rlLldpRemSrcMacAddr MacAddress,
|
|
rlLldpRemActiveStation TruthValue
|
|
}
|
|
|
|
rlLldpRemSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC address of the remote station."
|
|
::= { rlLldpRemEntry 1 }
|
|
|
|
rlLldpRemActiveStation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the entry is active (the port is up and LLDP Rx is enabled)."
|
|
::= { rlLldpRemEntry 2 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- rlLldpV2Config OBJECT IDENTIFIER ::= { rlLldpObjects 7 }
|
|
------------------------------------------------------------------------------
|
|
|
|
rlLldpV2AutoAdvLocPortManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLldpV2AutoAdvLocPortManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains automaticaly selected management address,
|
|
advertised on the local port."
|
|
REFERENCE
|
|
"Marvell LLDP"
|
|
::= { rlLldpV2Config 1 }
|
|
|
|
rlLldpV2AutoAdvLocPortManAddrEntry OBJECT-TYPE
|
|
SYNTAX RlLldpV2AutoAdvLocPortManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a local port, which advertises the Management
|
|
address automatically. Entry also included an interface number, on
|
|
which the Management address is assigned.
|
|
Each management address should have distinct 'management address
|
|
type' (rlLldpAutoAdvManAddrSubtype) and 'management address'
|
|
(rlLldpAutoAdvManAddr)."
|
|
|
|
INDEX { rlLldpV2AutoAdvLocPortNum, rlLldpV2AutoAdvManAddrType, rlLldpV2AutoAdvManAddr}
|
|
::= { rlLldpV2AutoAdvLocPortManAddrTable 1 }
|
|
|
|
RlLldpV2AutoAdvLocPortManAddrEntry ::= SEQUENCE {
|
|
rlLldpV2AutoAdvLocPortNum LldpPortNumber,
|
|
rlLldpV2AutoAdvManAddrType InetAddressType,
|
|
rlLldpV2AutoAdvManAddr InetAddress,
|
|
rlLldpV2AutoAdvManAddrOwnerIfId Integer32
|
|
}
|
|
|
|
rlLldpV2AutoAdvLocPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
|
|
The value of this object is used as a port index to the
|
|
rlLldpAutoAdvLocPortManAddrTable."
|
|
::= { rlLldpV2AutoAdvLocPortManAddrEntry 1 }
|
|
|
|
rlLldpV2AutoAdvManAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'rlLldpAutoAdvManAddr' object."
|
|
::= { rlLldpV2AutoAdvLocPortManAddrEntry 2 }
|
|
|
|
rlLldpV2AutoAdvManAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address is
|
|
automatically advertised by local port, and assigned on the
|
|
associated 'rlLldpAutoAdvManAddrOwnerIfId' interface."
|
|
::= { rlLldpV2AutoAdvLocPortManAddrEntry 3 }
|
|
|
|
rlLldpV2AutoAdvManAddrOwnerIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value is used to identify the interface number
|
|
(port, trunk or vlan). The management address, automatically
|
|
advertised from associated 'rlLldpAutoAdvLocPortNum' local port is
|
|
assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface."
|
|
::= { rlLldpV2AutoAdvLocPortManAddrEntry 4 }
|
|
|
|
END
|
|
|