1939 lines
72 KiB
Plaintext
1939 lines
72 KiB
Plaintext
CISCOSB-TIMESYNCHRONIZATION-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
Unsigned32, Integer32, IpAddress,
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
DisplayString, TEXTUAL-CONVENTION ,
|
|
RowStatus, TruthValue FROM SNMPv2-TC
|
|
InterfaceIndex FROM IF-MIB;
|
|
|
|
rlTimeSynchronization MODULE-IDENTITY
|
|
LAST-UPDATED "202105170000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The MIB module describes the private MIB for SNTP & TIME definitions."
|
|
REVISION "200906180024Z"
|
|
DESCRIPTION
|
|
"Added support in DHCP timezone option."
|
|
REVISION "200709060024Z"
|
|
DESCRIPTION
|
|
"Added rlClockStatus"
|
|
REVISION "200311230024Z"
|
|
DESCRIPTION
|
|
"Initial revision"
|
|
::= { switch001 92 }
|
|
|
|
rlTimeSyncMethodMode OBJECT IDENTIFIER ::= { rlTimeSynchronization 1 }
|
|
rlSntpNtpClient OBJECT IDENTIFIER ::= { rlTimeSynchronization 2 }
|
|
|
|
rlSntpNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 1 }
|
|
rlSntpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 2 }
|
|
rlNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 3 }
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
NTPTimeStamp ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "4d.4d"
|
|
STATUS current
|
|
DESCRIPTION "NTP timestamps are represented as a 64-bit
|
|
unsigned fixed-point number, in seconds relative to
|
|
00:00 on 1 January 1900. The integer part is in the
|
|
first 32 bits and the fraction part is in the last
|
|
32 bits."
|
|
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
|
|
RFC-1305, March 1992, Section 3.1"
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2d.2d"
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that could represent signed
|
|
quantities like time delay with respect to some
|
|
source. This textual-convention is specific to CISCOSB
|
|
implementation of NTP where 32-bit integers are used
|
|
for such quantities. The signed integer part is in
|
|
the first 16 bits and the fraction part is in the
|
|
last 16 bits."
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
|
|
NTPStratum ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Indicates the stratum of the clock. The stratum
|
|
defines the accuracy of a time server. Higher the
|
|
stratum, lower the accuracy.
|
|
0, unspecified
|
|
1, primary reference (e.g., calibrated atomic clock,
|
|
radio clock)
|
|
2-255, secondary reference (via NTP)"
|
|
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
|
|
RFC-1305, March 1992, Section 2.2"
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Global TimeSyncMethod
|
|
-- ----------------------------------------------------------------------
|
|
|
|
RlTimeSyncMethod ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
SYNTAX INTEGER { none(1),
|
|
sntp(2),
|
|
ntp(3)
|
|
}
|
|
|
|
RlDaylightSavingTimeMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
SYNTAX INTEGER {
|
|
recurring(1),
|
|
date(2),
|
|
none(3)
|
|
}
|
|
|
|
rlTimeSyncMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TimeSync Mib Version."
|
|
::= { rlTimeSyncMethodMode 1 }
|
|
|
|
rndTimeSyncManagedTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time will be sent in the format hhmmss"
|
|
::= { rlTimeSyncMethodMode 2 }
|
|
|
|
rndTimeSyncManagedDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The date will be sent in the format ddmmyy"
|
|
::= { rlTimeSyncMethodMode 3 }
|
|
|
|
rndTimeSyncManagedDateTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The date and time will be sent in the format ddmmyyhhmmss"
|
|
::= { rlTimeSyncMethodMode 4 }
|
|
|
|
rlTimeSyncMethod OBJECT-TYPE
|
|
SYNTAX RlTimeSyncMethod
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
DEFVAL { none }
|
|
::= { rlTimeSyncMethodMode 5 }
|
|
|
|
rlTimeZone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
|
|
::= {rlTimeSyncMethodMode 6 }
|
|
|
|
rlTimeZoneCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current TimeZone."
|
|
::= {rlTimeSyncMethodMode 7 }
|
|
|
|
rlDaylightSavingTimeMode OBJECT-TYPE
|
|
SYNTAX RlDaylightSavingTimeMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
DEFVAL { none }
|
|
::= { rlTimeSyncMethodMode 8 }
|
|
|
|
rlDaylightSavingTimeStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeSyncMethodMode 9 }
|
|
|
|
rlDaylightSavingTimeEnd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeSyncMethodMode 10 }
|
|
|
|
rlDaylightSavingTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - The number of minutes to add to
|
|
the clock during summer time."
|
|
DEFVAL { 60 }
|
|
::= { rlTimeSyncMethodMode 11 }
|
|
|
|
rlDaylightSavingTimeCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current Daylight Saving Time."
|
|
::= {rlTimeSyncMethodMode 12 }
|
|
|
|
rlTZDSTOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Time Zone and Daylight Saving Time offset
|
|
in seconds."
|
|
::= { rlTimeSyncMethodMode 13 }
|
|
|
|
rlTimeZoneName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Human readable string describing Local Time Zone and Daylight Saving Time."
|
|
::= {rlTimeSyncMethodMode 14 }
|
|
|
|
|
|
|
|
--
|
|
-- TimeZone table
|
|
--
|
|
|
|
-- TimeZone table aimed to replace next mibs:
|
|
-- rlTimeSyncMethod
|
|
-- rlTimeZone
|
|
-- rlTimeZoneCode
|
|
-- rlDaylightSavingTimeMode
|
|
-- rlDaylightSavingTimeStart
|
|
-- rlDaylightSavingTimeEnd
|
|
-- rlDaylightSavingTimeOffset
|
|
-- rlDaylightSavingTimeCode
|
|
-- rlTZDSTOffset
|
|
-- rlTimeZoneName
|
|
-- Table consist of one entry (with index = 1) and each field corresponding
|
|
-- to one of this MIB scalars, holding Timezone and Summertime static information.
|
|
-- In case DHCP timezone option is supported, the table will contain another row,
|
|
-- with index = 2, that will contain dynamic values for Timezone and Summertime
|
|
-- received through DHCP.
|
|
|
|
rlTimeZoneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlTimeZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "TimeZone information."
|
|
::= { rlTimeSyncMethodMode 15 }
|
|
|
|
rlTimeZoneEntry OBJECT-TYPE
|
|
SYNTAX RlTimeZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX { rlTimeZoneIndex }
|
|
::= { rlTimeZoneTable 1 }
|
|
|
|
RlTimeZoneEntry ::= SEQUENCE {
|
|
rlTimeZoneIndex INTEGER,
|
|
rlTimeZoneTimeSyncMethod RlTimeSyncMethod,
|
|
rlTimeZoneTimeZoneOffset DisplayString (SIZE(1..6)),
|
|
rlTimeZoneTimeZoneCode DisplayString (SIZE(0..16)),
|
|
rlTimeZoneDaylightSavingTimeMode RlDaylightSavingTimeMode,
|
|
rlTimeZoneDaylightSavingTimeStart OCTET STRING (SIZE(14)),
|
|
rlTimeZoneDaylightSavingTimeEnd OCTET STRING (SIZE(14)),
|
|
rlTimeZoneDaylightSavingTimeOffset Integer32,
|
|
rlTimeZoneDaylightSavingTimeCode DisplayString (SIZE(0..16)),
|
|
rlTimeZoneTZDSTOffset INTEGER,
|
|
rlTimeZoneTimeZoneName DisplayString (SIZE(0..16)),
|
|
rlTimeZoneDataType INTEGER,
|
|
rlTimeZoneDataSourceIfIndex INTEGER,
|
|
rlTimeZoneDataDynamicConfSource INTEGER
|
|
}
|
|
|
|
rlTimeZoneIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry index. A row with index 2 will be existing in case the DHCP
|
|
timezone is supported, and will contain Timezone and Summertime dynamic
|
|
values.
|
|
Using index 2 in SET operations is allowed only for SNMP
|
|
inner clients (SNMPServ users), on condition that DHCP timezone option
|
|
is supported."
|
|
::= { rlTimeZoneEntry 1 }
|
|
|
|
rlTimeZoneTimeSyncMethod OBJECT-TYPE
|
|
SYNTAX RlTimeSyncMethod
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 2 }
|
|
|
|
rlTimeZoneTimeZoneOffset OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
|
|
::= { rlTimeZoneEntry 3 }
|
|
|
|
rlTimeZoneTimeZoneCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current TimeZone."
|
|
::= { rlTimeZoneEntry 4 }
|
|
|
|
rlTimeZoneDaylightSavingTimeMode OBJECT-TYPE
|
|
SYNTAX RlDaylightSavingTimeMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 5 }
|
|
|
|
rlTimeZoneDaylightSavingTimeStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeZoneEntry 6 }
|
|
|
|
rlTimeZoneDaylightSavingTimeEnd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeZoneEntry 7 }
|
|
|
|
rlTimeZoneDaylightSavingTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - The number of minutes to add to
|
|
the clock during summer time."
|
|
DEFVAL { 60 }
|
|
::= { rlTimeZoneEntry 8 }
|
|
|
|
rlTimeZoneDaylightSavingTimeCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current Daylight Saving Time."
|
|
::= { rlTimeZoneEntry 9 }
|
|
|
|
rlTimeZoneTZDSTOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Time Zone and Daylight Saving Time offset in seconds."
|
|
::= { rlTimeZoneEntry 10 }
|
|
|
|
rlTimeZoneTimeZoneName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Human readable string describing Local Time Zone and Daylight Saving Time."
|
|
::= { rlTimeZoneEntry 11 }
|
|
|
|
rlTimeZoneDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of data in this entry: static or dynamic."
|
|
DEFVAL { static }
|
|
::= { rlTimeZoneEntry 12 }
|
|
|
|
rlTimeZoneDataSourceIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the interface through which the dynamic data of this row has been learned.
|
|
The value of this field will be 0 if rlTimeZoneTimeDataType is static (since it is
|
|
relevant only for dynamic entry), and this is the only value allowed for SET in this case."
|
|
DEFVAL { 0 }
|
|
::= { rlTimeZoneEntry 13 }
|
|
|
|
rlTimeZoneDataDynamicConfSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dhcpv4(2),
|
|
dhcpv6(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The source of dynamic data in this entry, for example: dhcpv4.
|
|
Values other than 'none' are relevant only for dynamic entry."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 14 }
|
|
|
|
|
|
rlClockStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
manuallySet(2),
|
|
synchronizedBySntp(3),
|
|
setByRtc(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current status of the clock. The value 'invalid' means time is meaninglesss,
|
|
since it has not been manually configured, or achieved as a result
|
|
of SNTP synchronization or set by RTC."
|
|
::= {rlTimeSyncMethodMode 16 }
|
|
|
|
rlDhcpTimezoneOptionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system.
|
|
Setting this value to FALSE, will clear Timezone and Summertime dynamic configuration,
|
|
so that:
|
|
1) rlTimeZoneTimeZoneCode and rlTimeZoneDaylightSavingTimeCode length will
|
|
be 0 for rlTimeZoneEntry whose index = 2 (dynamic entry).
|
|
2) the operative values of Timezone and Summertime will be those
|
|
statically configured. Thus, GET operations on the following
|
|
MIB scalars will result is static values:
|
|
rlTimeZone, rlTimeZoneCode, rlDaylightSavingTimeMode,
|
|
rlDaylightSavingTimeStart, rlDaylightSavingTimeEnd, rlDaylightSavingTimeOffset,
|
|
rlDaylightSavingTimeCode, rlTZDSTOffset."
|
|
::= {rlTimeSyncMethodMode 17 }
|
|
|
|
rlAutomaticClockSetFromPCEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether automatic set of time and date is permitted from
|
|
connected host PC.
|
|
The feature is meant to be used in order to initialize the clock
|
|
after reboot (if SNTP is not in use), since the device does not have
|
|
a realtime clock."
|
|
DEFVAL { false }
|
|
::= {rlTimeSyncMethodMode 18 }
|
|
|
|
rlTimeAndDateHaveBeenSet OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the time and date have been set in the
|
|
device, manually or through SNTP synchronization.
|
|
If only time has been set, the value of this MIB will
|
|
be FALSE. If only date has been set, the value of this MIB
|
|
will be FALSE."
|
|
::= {rlTimeSyncMethodMode 19 }
|
|
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP/NTP client configuration parameters
|
|
-- ----------------------------------------------------------------------
|
|
|
|
RlSntpNtpSyncType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unicast(2),
|
|
anycast(3),
|
|
broadcast(4)
|
|
}
|
|
|
|
RlSntpNtpSyncEntryType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Entry in rlSntpNtpConfigSrvTable."
|
|
SYNTAX INTEGER {
|
|
primaryPollSrv(1),
|
|
syncSrv(2)
|
|
}
|
|
|
|
rlSntpNtpMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SntpNtp Mib Version."
|
|
::= { rlSntpNtpConfig 1 }
|
|
|
|
rlSntpNtpConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unicast(2),
|
|
anycast(3),
|
|
multicast(4),
|
|
unicastAnycast(5),
|
|
unicastMulticast(6),
|
|
anycastMulticast(7),
|
|
unicastAnycastMulticast(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current configuration operational mode of SNTP/NTP client."
|
|
DEFVAL { none }
|
|
::= { rlSntpNtpConfig 2 }
|
|
|
|
rlSntpNtpConfigSysStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the local clock. If the value is set
|
|
to 1, i.e., this is a primary reference, then the
|
|
Primary-Clock procedure described in Section 3.4.6,
|
|
in RFC-1305 is invoked."
|
|
::= { rlSntpNtpConfig 3 }
|
|
|
|
rlSntpNtpConfigPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Period of time (in seconds) between succesive attempts to
|
|
perform an update via SNTP."
|
|
DEFVAL { 1024 }
|
|
::= { rlSntpNtpConfig 4 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server for polling."
|
|
::= { rlSntpNtpConfig 5 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the primary server."
|
|
::= { rlSntpNtpConfig 6 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the primary server."
|
|
::= { rlSntpNtpConfig 7 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the primary polling server."
|
|
::= { rlSntpNtpConfig 8 }
|
|
|
|
rlSntpNtpConfigSyncSrvAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of the synced server."
|
|
::= { rlSntpNtpConfig 9 }
|
|
|
|
rlSntpNtpConfigSyncSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the synced server."
|
|
::= { rlSntpNtpConfig 10 }
|
|
|
|
rlSntpNtpConfigSyncSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the synced server."
|
|
::= { rlSntpNtpConfig 11 }
|
|
|
|
rlSntpNtpConfigSyncSrvType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Synced server type."
|
|
DEFVAL { none }
|
|
::= { rlSntpNtpConfig 12 }
|
|
|
|
|
|
rlSntpNtpConfigSyncSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the synced server."
|
|
::= { rlSntpNtpConfig 13 }
|
|
|
|
rlSntpNtpConfigRetryTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP requests Retry Interval."
|
|
::= { rlSntpNtpConfig 14 }
|
|
|
|
rlSntpNtpConfigRetryCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP requests Retry Count."
|
|
::= { rlSntpNtpConfig 15 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP Config Servers
|
|
-- ----------------------------------------------------------------------
|
|
|
|
-- Will replace next MIBs:
|
|
|
|
-- rlSntpNtpConfigPrimaryPollSrvAddr
|
|
-- rlSntpNtpConfigPrimaryPollSrvMrid
|
|
-- rlSntpNtpConfigPrimaryPollSrvIfIndex
|
|
-- rlSntpNtpConfigPrimaryPollSrvStratum
|
|
|
|
-- rlSntpNtpConfigSyncSrvAddr
|
|
-- rlSntpNtpConfigSyncSrvMrid
|
|
-- rlSntpNtpConfigSyncSrvIfIndex
|
|
-- rlSntpNtpConfigSyncSrvType
|
|
-- rlSntpNtpConfigSyncSrvStratum
|
|
|
|
rlSntpNtpConfigSrvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpNtpConfigSrvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information about config servers."
|
|
::= { rlSntpNtpConfig 16 }
|
|
|
|
rlSntpNtpConfigSrvEntry OBJECT-TYPE
|
|
SYNTAX RlSntpNtpConfigSrvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry in rlSntpNtpConfigSrvTable."
|
|
INDEX { rlSntpNtpConfigSrvEntryType }
|
|
::= { rlSntpNtpConfigSrvTable 1 }
|
|
|
|
RlSntpNtpConfigSrvEntry ::=
|
|
SEQUENCE {
|
|
rlSntpNtpConfigSrvEntryType RlSntpNtpSyncEntryType,
|
|
rlSntpNtpConfigSrvInetAddressType InetAddressType,
|
|
rlSntpNtpConfigSrvInetAddress InetAddress,
|
|
rlSntpNtpConfigSrvMrid INTEGER,
|
|
rlSntpNtpConfigSrvIfIndex INTEGER,
|
|
rlSntpNtpConfigSrvSyncType RlSntpNtpSyncType,
|
|
rlSntpNtpConfigSrvStratum NTPStratum
|
|
}
|
|
|
|
rlSntpNtpConfigSrvEntryType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncEntryType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Server type: Synchronize Server or Primary Poll Server."
|
|
::= { rlSntpNtpConfigSrvEntry 1 }
|
|
|
|
rlSntpNtpConfigSrvInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Server inet address type."
|
|
::= { rlSntpNtpConfigSrvEntry 2 }
|
|
|
|
rlSntpNtpConfigSrvInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Server inet address."
|
|
::= { rlSntpNtpConfigSrvEntry 3 }
|
|
|
|
rlSntpNtpConfigSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the server."
|
|
::= { rlSntpNtpConfigSrvEntry 4 }
|
|
|
|
rlSntpNtpConfigSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the server."
|
|
::= { rlSntpNtpConfigSrvEntry 5 }
|
|
|
|
rlSntpNtpConfigSrvSyncType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of synchronization."
|
|
::= { rlSntpNtpConfigSrvEntry 6 }
|
|
|
|
rlSntpNtpConfigSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the synced server."
|
|
::= { rlSntpNtpConfigSrvEntry 7 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP client configuration parameters
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpClientMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
active(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current operational mode of SNTP client."
|
|
DEFVAL { none }
|
|
::= { rlSntpConfig 1 }
|
|
|
|
rlSntpUnicastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Unicast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 2 }
|
|
|
|
rlSntpBroadcastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
ipv4OnlyEnabled(3),
|
|
ipv6OnlyEnabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 3 }
|
|
|
|
rlSntpAnycastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
ipv4OnlyEnabled(3),
|
|
ipv6OnlyEnabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 4 }
|
|
|
|
rlSntpUnicastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Unicast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 5 }
|
|
|
|
rlSntpBroadcastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 6 }
|
|
|
|
rlSntpAnycastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 7 }
|
|
|
|
rlSntpAuthenticationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP authentication state- Enable/Disable SNTP."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 8 }
|
|
|
|
rlTimeValidFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is time valid."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 9 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Interfaces (Broadcast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigBroadcastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpBroadcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing broadcast mode information per
|
|
interface."
|
|
::= { rlSntpConfig 10 }
|
|
|
|
rlSntpBroadcastEntry OBJECT-TYPE
|
|
SYNTAX RlSntpBroadcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
sntp status, broadcast mode."
|
|
INDEX { rlSntpBroadcastIfIndex }
|
|
::= { rlSntpConfigBroadcastTable 1 }
|
|
|
|
RlSntpBroadcastEntry ::=
|
|
SEQUENCE {
|
|
rlSntpBroadcastIfIndex INTEGER,
|
|
rlSntpBroadcastIfAdminState INTEGER,
|
|
rlSntpBroadcastMode INTEGER,
|
|
rlSntpBroadcastPolled TruthValue,
|
|
rlSntpBroadcastAddress IpAddress,
|
|
rlSntpBroadcastStratum NTPStratum,
|
|
rlSntpBroadcastLastResp NTPTimeStamp,
|
|
rlSntpBroadcastStatus INTEGER,
|
|
rlSntpBroadcastOffset NTPTimeStamp,
|
|
rlSntpBroadcastDelay NTPSignedTimeValue,
|
|
rlSntpBroadcastRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpBroadcastIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpBroadcastEntry 1}
|
|
|
|
rlSntpBroadcastIfAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpBroadcastEntry 2 }
|
|
|
|
rlSntpBroadcastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
receive(2),
|
|
send(3),
|
|
receiveSend(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP Broadcast Mode.
|
|
none - no broadcast SNTP packets are received or sent.
|
|
Receive - host only receive SNTP packets that were sent
|
|
to broadcast address (were not directed to
|
|
the host). This is multicast mode in the RFC.
|
|
Send - host only send SNTP packets and wait for replies
|
|
directed to the host. This is anycast mode in
|
|
the RFC.
|
|
ReceiveSend - host receive broadcast messages (destination
|
|
is broadcast address in the received messages)
|
|
and send SNTP packets to wait for replies
|
|
directed to the host (destination address
|
|
of the reply is the host address). This mode
|
|
combines anycast and multicast modes in the
|
|
RFC."
|
|
DEFVAL { receiveSend }
|
|
::= { rlSntpBroadcastEntry 3 }
|
|
|
|
rlSntpBroadcastPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpBroadcastEntry 4 }
|
|
|
|
rlSntpBroadcastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpBroadcastEntry 5 }
|
|
|
|
rlSntpBroadcastStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpBroadcastEntry 6 }
|
|
|
|
rlSntpBroadcastLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Response Time"
|
|
::= { rlSntpBroadcastEntry 7 }
|
|
|
|
rlSntpBroadcastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Broadcast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpBroadcastEntry 8 }
|
|
|
|
rlSntpBroadcastOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastEntry 9 }
|
|
|
|
rlSntpBroadcastDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastEntry 10 }
|
|
|
|
rlSntpBroadcastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP broadcast interface
|
|
information."
|
|
::= { rlSntpBroadcastEntry 11 }
|
|
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Interfaces (Anycast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAnycastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAnycastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing anycast information per
|
|
interface."
|
|
::= { rlSntpConfig 11 }
|
|
|
|
rlSntpAnycastEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAnycastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
server info."
|
|
INDEX { rlSntpAnycastIfIndex }
|
|
::= { rlSntpConfigAnycastTable 1 }
|
|
|
|
RlSntpAnycastEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAnycastIfIndex INTEGER,
|
|
rlSntpAnycastAddress IpAddress,
|
|
rlSntpAnycastStratum NTPStratum,
|
|
rlSntpAnycastLastResp NTPTimeStamp,
|
|
rlSntpAnycastStatus INTEGER,
|
|
rlSntpAnycastOffset NTPTimeStamp,
|
|
rlSntpAnycastDelay NTPSignedTimeValue,
|
|
rlSntpAnycastRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpAnycastIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpAnycastEntry 1}
|
|
|
|
rlSntpAnycastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpAnycastEntry 2 }
|
|
|
|
rlSntpAnycastStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAnycastEntry 3 }
|
|
|
|
rlSntpAnycastLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Response Time"
|
|
::= { rlSntpAnycastEntry 4 }
|
|
|
|
rlSntpAnycastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Anycast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAnycastEntry 5 }
|
|
|
|
rlSntpAnycastOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastEntry 6 }
|
|
|
|
rlSntpAnycastDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastEntry 7 }
|
|
|
|
rlSntpAnycastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP anycast interface
|
|
information."
|
|
::= { rlSntpAnycastEntry 8 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Servers (Unicast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing trusted SNTP servers to be queried in
|
|
unicast or broadcast mode."
|
|
::= { rlSntpConfig 12 }
|
|
|
|
rlSntpServerEntry OBJECT-TYPE
|
|
SYNTAX RlSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A trusted server."
|
|
INDEX { rlSntpServerAddress }
|
|
::= { rlSntpConfigServerTable 1 }
|
|
|
|
RlSntpServerEntry ::=
|
|
SEQUENCE {
|
|
rlSntpServerAddress IpAddress,
|
|
rlSntpServerPolled TruthValue,
|
|
rlSntpServerStratum NTPStratum,
|
|
rlSntpServerLastResp NTPTimeStamp,
|
|
rlSntpServerStatus INTEGER,
|
|
rlSntpServersOffset NTPTimeStamp,
|
|
rlSntpServersDelay NTPSignedTimeValue,
|
|
rlSntpServersKeyIdentifier Unsigned32,
|
|
rlSntpServerRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpServerEntry 1 }
|
|
|
|
rlSntpServerPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpServerEntry 2 }
|
|
|
|
rlSntpServerStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpServerEntry 3 }
|
|
|
|
rlSntpServerLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpServerEntry 4 }
|
|
|
|
rlSntpServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpServerEntry 5 }
|
|
|
|
rlSntpServersOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerEntry 6 }
|
|
|
|
rlSntpServersDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerEntry 7 }
|
|
|
|
rlSntpServersKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpServerEntry 8 }
|
|
|
|
rlSntpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP server information."
|
|
::= { rlSntpServerEntry 9 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring authentication keys
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table authentication keys."
|
|
::= { rlSntpConfig 13 }
|
|
|
|
rlSntpAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Keys information for authenticationof NTP packets."
|
|
INDEX { rlSntpAuthenticationKeyID }
|
|
::= { rlSntpConfigAuthenticationTable 1 }
|
|
|
|
RlSntpAuthenticationEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAuthenticationKeyID Unsigned32 (1..4294967295),
|
|
rlSntpAuthenticationKeyValue DisplayString,
|
|
rlSntpAuthenticationKeyState INTEGER,
|
|
rlSntpAuthenticationRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpAuthenticationKeyID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The key identifier. Valid rabge for key identifier
|
|
is 1-4294967295."
|
|
::= {rlSntpAuthenticationEntry 1}
|
|
|
|
rlSntpAuthenticationKeyValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key value."
|
|
::= { rlSntpAuthenticationEntry 2 }
|
|
|
|
rlSntpAuthenticationKeyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key state - Enable/Disable key."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpAuthenticationEntry 3 }
|
|
|
|
rlSntpAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this Authentication key information."
|
|
::= { rlSntpAuthenticationEntry 4 }
|
|
|
|
rlSntpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1.. 65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User defined SNTP port."
|
|
DEFVAL { 123 }
|
|
::= { rlSntpConfig 14 }
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6 Support
|
|
-- ----------------------------------------------------------------------
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Interfaces (Broadcast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigBroadcastInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpBroadcastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing broadcast mode information per
|
|
interface."
|
|
::= { rlSntpConfig 15 }
|
|
|
|
rlSntpBroadcastInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpBroadcastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
sntp status, broadcast mode."
|
|
INDEX { rlSntpBroadcastInetIfIndex }
|
|
::= { rlSntpConfigBroadcastInetTable 1 }
|
|
|
|
RlSntpBroadcastInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpBroadcastInetIfIndex INTEGER,
|
|
rlSntpBroadcastInetIfAdminState INTEGER,
|
|
rlSntpBroadcastInetMode INTEGER,
|
|
rlSntpBroadcastInetPolled TruthValue,
|
|
rlSntpBroadcastInetAddressType InetAddressType,
|
|
rlSntpBroadcastInetAddress InetAddress,
|
|
rlSntpBroadcastInetStratum NTPStratum,
|
|
rlSntpBroadcastInetLastResp NTPTimeStamp,
|
|
rlSntpBroadcastInetStatus INTEGER,
|
|
rlSntpBroadcastInetOffset NTPTimeStamp,
|
|
rlSntpBroadcastInetDelay NTPSignedTimeValue,
|
|
rlSntpBroadcastInetRowStatus RowStatus,
|
|
rlSntpBroadcastInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpBroadcastInetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpBroadcastInetEntry 1}
|
|
|
|
rlSntpBroadcastInetIfAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpBroadcastInetEntry 2 }
|
|
|
|
rlSntpBroadcastInetMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
receive(2),
|
|
send(3),
|
|
receiveSend(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP Broadcast Mode.
|
|
none - no broadcast SNTP packets are received or sent.
|
|
Receive - host only receive SNTP packets that were sent
|
|
to broadcast address (were not directed to
|
|
the host). This is multicast mode in the RFC.
|
|
Send - host only send SNTP packets and wait for replies
|
|
directed to the host. This is anycast mode in
|
|
the RFC.
|
|
ReceiveSend - host receive broadcast messages (destination
|
|
is broadcast address in the received messages)
|
|
and send SNTP packets to wait for replies
|
|
directed to the host (destination address
|
|
of the reply is the host address). This mode
|
|
combines anycast and multicast modes in the
|
|
RFC."
|
|
DEFVAL { receiveSend }
|
|
::= { rlSntpBroadcastInetEntry 3 }
|
|
|
|
rlSntpBroadcastInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpBroadcastInetEntry 4 }
|
|
|
|
rlSntpBroadcastInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpBroadcastInetEntry 5 }
|
|
|
|
rlSntpBroadcastInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpBroadcastInetEntry 6 }
|
|
|
|
rlSntpBroadcastInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpBroadcastInetEntry 7 }
|
|
|
|
rlSntpBroadcastInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Response Time"
|
|
::= { rlSntpBroadcastInetEntry 8 }
|
|
|
|
rlSntpBroadcastInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Broadcast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpBroadcastInetEntry 9 }
|
|
|
|
rlSntpBroadcastInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastInetEntry 10 }
|
|
|
|
rlSntpBroadcastInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastInetEntry 11 }
|
|
|
|
rlSntpBroadcastInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP broadcast interface
|
|
information."
|
|
::= { rlSntpBroadcastInetEntry 12 }
|
|
|
|
rlSntpBroadcastInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Request Time"
|
|
::= { rlSntpBroadcastInetEntry 13 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Interfaces (Anycast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAnycastInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAnycastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing anycast information per
|
|
interface."
|
|
::= { rlSntpConfig 16 }
|
|
|
|
rlSntpAnycastInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAnycastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
server info."
|
|
INDEX { rlSntpAnycastInetIfIndex }
|
|
::= { rlSntpConfigAnycastInetTable 1 }
|
|
|
|
RlSntpAnycastInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAnycastInetIfIndex INTEGER,
|
|
rlSntpAnycastInetAddressType InetAddressType,
|
|
rlSntpAnycastInetAddress InetAddress,
|
|
rlSntpAnycastInetStratum NTPStratum,
|
|
rlSntpAnycastInetLastResp NTPTimeStamp,
|
|
rlSntpAnycastInetStatus INTEGER,
|
|
rlSntpAnycastInetOffset NTPTimeStamp,
|
|
rlSntpAnycastInetDelay NTPSignedTimeValue,
|
|
rlSntpAnycastInetRowStatus RowStatus,
|
|
rlSntpAnycastInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpAnycastInetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpAnycastInetEntry 1}
|
|
|
|
rlSntpAnycastInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpAnycastInetEntry 2 }
|
|
|
|
rlSntpAnycastInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpAnycastInetEntry 3 }
|
|
|
|
rlSntpAnycastInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAnycastInetEntry 4 }
|
|
|
|
rlSntpAnycastInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Response Time"
|
|
::= { rlSntpAnycastInetEntry 5 }
|
|
|
|
rlSntpAnycastInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Anycast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAnycastInetEntry 6 }
|
|
|
|
rlSntpAnycastInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastInetEntry 7 }
|
|
|
|
rlSntpAnycastInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastInetEntry 8 }
|
|
|
|
rlSntpAnycastInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP anycast interface
|
|
information."
|
|
::= { rlSntpAnycastInetEntry 9 }
|
|
|
|
rlSntpAnycastInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Request Time"
|
|
::= { rlSntpAnycastInetEntry 10 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Servers (Unicast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigServerInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing trusted SNTP servers to be queried in
|
|
unicast or broadcast mode."
|
|
::= { rlSntpConfig 17 }
|
|
|
|
rlSntpServerInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A trusted server."
|
|
INDEX { rlSntpServerInetAddressType,
|
|
rlSntpServerInetAddress }
|
|
::= { rlSntpConfigServerInetTable 1 }
|
|
|
|
RlSntpServerInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpServerInetAddressType InetAddressType,
|
|
rlSntpServerInetAddress InetAddress,
|
|
rlSntpServerInetPolled TruthValue,
|
|
rlSntpServerInetStratum NTPStratum,
|
|
rlSntpServerInetLastResp NTPTimeStamp,
|
|
rlSntpServerInetStatus INTEGER,
|
|
rlSntpServerInetOffset NTPTimeStamp,
|
|
rlSntpServerInetDelay NTPSignedTimeValue,
|
|
rlSntpServerInetKeyIdentifier Unsigned32,
|
|
rlSntpServerInetRowStatus RowStatus,
|
|
rlSntpServerInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpServerInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpServerInetEntry 1 }
|
|
|
|
rlSntpServerInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpServerInetEntry 2 }
|
|
|
|
rlSntpServerInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpServerInetEntry 3 }
|
|
|
|
rlSntpServerInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpServerInetEntry 4 }
|
|
|
|
rlSntpServerInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpServerInetEntry 5 }
|
|
|
|
rlSntpServerInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpServerInetEntry 6 }
|
|
|
|
rlSntpServerInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerInetEntry 7 }
|
|
|
|
rlSntpServerInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerInetEntry 8 }
|
|
|
|
rlSntpServerInetKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpServerInetEntry 9 }
|
|
|
|
rlSntpServerInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP server information."
|
|
::= { rlSntpServerInetEntry 10 }
|
|
|
|
rlSntpServerInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Request Time"
|
|
::= { rlSntpServerInetEntry 11 }
|
|
|
|
|
|
rlSntpAllServerInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAllServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing all SNTP servers (for example: statically
|
|
configured, dynamically configured) to be queried in unicast
|
|
or broadcast mode."
|
|
::= { rlSntpConfig 18 }
|
|
|
|
rlSntpAllServerInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAllServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A server entry."
|
|
|
|
INDEX { rlSntpAllServerSource,
|
|
rlSntpAllServerIfIndex,
|
|
rlSntpAllServerPreference,
|
|
rlSntpAllServerInetAddressType,
|
|
rlSntpAllServerInetAddress
|
|
}
|
|
::= { rlSntpAllServerInetTable 1 }
|
|
|
|
RlSntpAllServerInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAllServerSource INTEGER,
|
|
rlSntpAllServerIfIndex InterfaceIndex,
|
|
rlSntpAllServerPreference INTEGER,
|
|
rlSntpAllServerInetAddressType InetAddressType,
|
|
rlSntpAllServerInetAddress InetAddress,
|
|
rlSntpAllServerInetPolled TruthValue,
|
|
rlSntpAllServerInetStratum NTPStratum,
|
|
rlSntpAllServerInetLastResp NTPTimeStamp,
|
|
rlSntpAllServerInetStatus INTEGER,
|
|
rlSntpAllServerInetOffset NTPTimeStamp,
|
|
rlSntpAllServerInetDelay NTPSignedTimeValue,
|
|
rlSntpAllServerInetKeyIdentifier Unsigned32,
|
|
rlSntpAllServerInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpAllServerSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dhcpv6(2),
|
|
dhcpv4(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The SNTP server source: static means manually defined,
|
|
dhcpv6 means learnt from DHCP. Only static entries are
|
|
stored in CDB."
|
|
::= { rlSntpAllServerInetEntry 1 }
|
|
|
|
rlSntpAllServerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The ifIndex from which the SNTP server configuration was
|
|
received (for dhcpv6 configurations). For static entries
|
|
the value of this field will always be 1. "
|
|
::= { rlSntpAllServerInetEntry 2 }
|
|
|
|
rlSntpAllServerPreference OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The preference of SNTP server (for dhcpv6 configurations).
|
|
For static entries the value of this field will always be 0. "
|
|
::= { rlSntpAllServerInetEntry 3 }
|
|
|
|
rlSntpAllServerInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SNTP server inet address type."
|
|
::= { rlSntpAllServerInetEntry 4 }
|
|
|
|
rlSntpAllServerInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SNTP server inet address."
|
|
::= { rlSntpAllServerInetEntry 5 }
|
|
|
|
rlSntpAllServerInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpAllServerInetEntry 6 }
|
|
|
|
rlSntpAllServerInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAllServerInetEntry 7 }
|
|
|
|
rlSntpAllServerInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpAllServerInetEntry 8 }
|
|
|
|
rlSntpAllServerInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAllServerInetEntry 9 }
|
|
|
|
rlSntpAllServerInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAllServerInetEntry 10 }
|
|
|
|
rlSntpAllServerInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAllServerInetEntry 11 }
|
|
|
|
rlSntpAllServerInetKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpAllServerInetEntry 12 }
|
|
|
|
rlSntpAllServerInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Request Time"
|
|
::= { rlSntpAllServerInetEntry 13 }
|
|
|
|
rlSntpRestoreDefaultServers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this scalar to true restores sntp default unicast servers.
|
|
Meaning: all manually configured servers are deleted, and the
|
|
default SNTP servers are recreated with their default values.
|
|
This is an 'action' scalar."
|
|
::= { rlSntpConfig 19 }
|
|
|
|
rlSntpTimeSinceLastSync OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP time in seconds since last sync."
|
|
::= { rlSntpConfig 20 }
|
|
|
|
END
|