3533 lines
126 KiB
Plaintext
3533 lines
126 KiB
Plaintext
CTRON-WAN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- CTRON-WAN-MIB The Cabletron Wide area MIB.
|
|
-- Revision: 01.08.06
|
|
-- Part Number: 2170989
|
|
-- Date: May 20, 1998
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for part
|
|
-- of the naming tree below:
|
|
--
|
|
-- cabletron { enterprises 52 }
|
|
--
|
|
-- This module will be extended, as additional sub-sections
|
|
-- of this naming tree are defined.
|
|
--
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
|
|
-- Copyright August 95 Cabletron Systems
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE FROM RFC-1212
|
|
ctWan FROM CTRON-MIB-NAMES
|
|
DisplayString FROM RFC1213-MIB
|
|
IpAddress, Counter FROM RFC1155-SMI;
|
|
|
|
-- variables
|
|
Index ::= INTEGER
|
|
DLCI ::= INTEGER
|
|
-- DisplayString ::= OCTET STRING
|
|
|
|
--====================================================================
|
|
-- Groups
|
|
|
|
ctWanConnection OBJECT IDENTIFIER ::= { ctWan 1 }
|
|
|
|
ctWanDs1 OBJECT IDENTIFIER ::= { ctWan 2 }
|
|
|
|
ctWanRs232 OBJECT IDENTIFIER ::= { ctWan 3 }
|
|
|
|
ctFrDcp OBJECT IDENTIFIER ::= { ctWan 4 }
|
|
|
|
ctDDS OBJECT IDENTIFIER ::= { ctWan 5 }
|
|
|
|
ctDs1Alarms OBJECT IDENTIFIER ::= { ctWan 6 }
|
|
|
|
ctIPPQFilters OBJECT IDENTIFIER ::= { ctWan 7 }
|
|
|
|
ctWanHDSLExt OBJECT IDENTIFIER ::= { ctWan 8 }
|
|
|
|
-- ctWanConnection Group
|
|
-- This group is mandatory for all platforms that have one or more
|
|
-- Wan Connections
|
|
|
|
wanNumConnections OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This objects describes the number of wan connections on the
|
|
platform. A wan connection may have one or two physical ports
|
|
of which only one can be active at any time."
|
|
::= { ctWanConnection 1 }
|
|
|
|
wanConnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WanConnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of wan connection entries. The number of wan
|
|
connection entries is given by the value of wanNumConnections."
|
|
::= { ctWanConnection 2 }
|
|
|
|
wanConnEntry OBJECT-TYPE
|
|
SYNTAX WanConnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A wan connection entry containing objects relating to
|
|
the particular wan connection."
|
|
INDEX { wanConnIndex }
|
|
::= { wanConnTable 1 }
|
|
|
|
WanConnEntry ::=
|
|
SEQUENCE {
|
|
wanConnIndex
|
|
INTEGER,
|
|
wanConnNumPhysPorts
|
|
INTEGER,
|
|
wanConnDefaultPhysPort
|
|
INTEGER,
|
|
wanConnActivePhysPort
|
|
INTEGER
|
|
}
|
|
|
|
wanConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each wan connection. Its value ranges
|
|
between 1 and the value wanNumConnections."
|
|
::= { wanConnEntry 1 }
|
|
|
|
wanConnNumPhysPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of physical ports that exist on this wan
|
|
connection."
|
|
::= { wanConnEntry 2 }
|
|
|
|
wanConnDefaultPhysPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default physical port for this connection. This
|
|
indicates the physical port that should be used on this wan
|
|
connection. If redundancy is not enabled, this physical port
|
|
will always be used. If redundancy is enabled, the physical
|
|
port given here will be considered the primary physical port.
|
|
The value of this object must be set to the index of a
|
|
valid physical port (wanPhysPortIndex) for this wan connection."
|
|
::= { wanConnEntry 3 }
|
|
|
|
wanConnActivePhysPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical port that is currently active for this wan
|
|
connection. The value of this object indicates the
|
|
wanPhysPortIndex for the active port."
|
|
::= { wanConnEntry 4 }
|
|
|
|
|
|
wanPhysPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WanPhysPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the descriptions of the physical ports of this
|
|
platform. The number of entries is given by the value
|
|
of wanConnNumPhysPort for each Wan Connection."
|
|
::= { ctWanConnection 3 }
|
|
|
|
wanPhysPortEntry OBJECT-TYPE
|
|
SYNTAX WanPhysPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A physical port entry. It contains objects relating to a
|
|
given physical port"
|
|
INDEX { wanPhysPortConnectionIndex, wanPhysPortIndex }
|
|
::= { wanPhysPortTable 1 }
|
|
|
|
WanPhysPortEntry ::=
|
|
SEQUENCE {
|
|
wanPhysPortConnectionIndex
|
|
INTEGER,
|
|
wanPhysPortIndex
|
|
INTEGER,
|
|
wanPhysPortType
|
|
INTEGER,
|
|
wanPhysPortSpecificMib
|
|
OBJECT IDENTIFIER
|
|
}
|
|
|
|
wanPhysPortConnectionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value indicating the wan connection this physical port
|
|
is located on."
|
|
::= { wanPhysPortEntry 1 }
|
|
|
|
wanPhysPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each physical port on a wan connection.
|
|
Its value ranges between 1 and the value wanConnNumPhysPorts."
|
|
::= { wanPhysPortEntry 2 }
|
|
|
|
wanPhysPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
t1(2),
|
|
e1(3),
|
|
synchronous(4),
|
|
dds(5),
|
|
di(6),
|
|
hdsl(7),
|
|
bri(8),
|
|
ds30(9),
|
|
t1DDS(10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of physical port that this entry describes. None
|
|
indicates that the physical port has no connector."
|
|
::= { wanPhysPortEntry 3 }
|
|
|
|
wanPhysPortSpecificMib OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies an instance of the index object in
|
|
the first group of objects in the MIB specific to the
|
|
physical port."
|
|
::= { wanPhysPortEntry 4 }
|
|
|
|
wanInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WanInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface table for a physical port on a wan connection.
|
|
It is a list of items that are pertinent to the interfaces
|
|
that are part of this physical port. The number of entries
|
|
is dependent on the wanPhysPortType for the interface.
|
|
If the wanPhysPortType is none, there will be no entries
|
|
in the table for the port. If the wanPhysPortType is t1,
|
|
there will be 24 entries in this table for the port.
|
|
If the wanPhysPortType is e1, there will be 30 entries
|
|
in this table for the port. If the wanPhysPortType is
|
|
synchronous, there will be one entry in this table for the
|
|
port. "
|
|
::= { ctWanConnection 4 }
|
|
|
|
wanInterfaceEntry OBJECT-TYPE
|
|
SYNTAX WanInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A wan connection physical port interface entry. It
|
|
contains objects relating to an interface that is defined
|
|
for this physical port and this wan connection."
|
|
INDEX { wanInterfaceConnectionIndex, wanInterfacePhysPortIndex,
|
|
wanInterfaceEntryIndex }
|
|
::= { wanInterfaceTable 1}
|
|
|
|
WanInterfaceEntry ::=
|
|
SEQUENCE {
|
|
wanInterfaceConnectionIndex
|
|
INTEGER,
|
|
wanInterfacePhysPortIndex
|
|
INTEGER,
|
|
wanInterfaceEntryIndex
|
|
INTEGER,
|
|
wanInterfaceEntryIfIndex
|
|
INTEGER,
|
|
wanInterfaceEntryProtocol
|
|
INTEGER,
|
|
wanInterfaceEntryCompression
|
|
INTEGER,
|
|
wanInterfaceEntryMTU
|
|
INTEGER,
|
|
wanInterfaceEntryLineCoding
|
|
INTEGER,
|
|
wanInterfaceEntryCrcLength
|
|
INTEGER,
|
|
wanInterfaceEntryLexProtocolEnable
|
|
INTEGER,
|
|
wanInterfaceEntryLexProtocolStatus
|
|
INTEGER,
|
|
wanInterfaceEntryCompRatio
|
|
OCTET STRING,
|
|
wanInterfaceEntryCompStatus
|
|
INTEGER,
|
|
wanInterfaceEntryBackUpIfEnable
|
|
INTEGER
|
|
}
|
|
wanInterfaceConnectionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the wan connection that this interface
|
|
exists on."
|
|
::= { wanInterfaceEntry 1}
|
|
|
|
wanInterfacePhysPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the physical port of the wan connection
|
|
that this interface exists on."
|
|
::= { wanInterfaceEntry 2}
|
|
|
|
wanInterfaceEntryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each interface of this physical port.
|
|
It is a value between 1 and the number of interfaces that
|
|
exist for the current port. The number of interfaces for
|
|
each type of port is: 24 for a port type (wanPhysPortType)
|
|
of 't1', 30 for a port type of 'e1', and 1 for a port type
|
|
of 'synchronous'. There will be no entries if the port type
|
|
is 'none'."
|
|
::= { wanInterfaceEntry 3}
|
|
|
|
wanInterfaceEntryIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ifIndex of the interface. This is the index of this entry
|
|
in the ifTable."
|
|
REFERENCE
|
|
"rfc-1213"
|
|
::= { wanInterfaceEntry 4}
|
|
|
|
wanInterfaceEntryProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The protocol that should be run on this interface. Values
|
|
are equivalent to those defined for ifType in Mib-II.
|
|
Accepted values are product dependent."
|
|
REFERENCE
|
|
"rfc-1213, product literature"
|
|
::= { wanInterfaceEntry 5}
|
|
|
|
wanInterfaceEntryCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether data compression should take
|
|
place on this interface."
|
|
::= { wanInterfaceEntry 6}
|
|
|
|
wanInterfaceEntryMTU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MTU to be negotiated for this interface. This will not
|
|
be updated with the actual MTU, which can be found in the
|
|
ifTable."
|
|
::= { wanInterfaceEntry 7}
|
|
|
|
wanInterfaceEntryLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
jBZS (2),
|
|
invHDLC (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object describes the variety of Zero Code suppression
|
|
on this interface. For an interface on a Ds1 Port, the valid
|
|
values depend on the value of the Ds1ConfigLineCode object.
|
|
If that object is set to ds1xB8ZS, then this object can be
|
|
set to none, JBZS, or InvHDLC. If the value of
|
|
Ds1ConfigLineCode is set to ds1xAMI, then this object can
|
|
only be set to JBZS, or InvHDLC. For an interface on a
|
|
Synchronous Port, the valid values are none or InvHDLC.
|
|
JBZS refers to Jammed Bit Zero suppression, which forces a
|
|
1 bit every 8 bit periods. InvHDLC refers to inverting
|
|
the HDLC data for the interface. None refers to a mode
|
|
in which some other means, such as with the Ds1ConfigLineCode
|
|
object set to dsx1B8ZS, is used to insure pulse density
|
|
requirements."
|
|
REFERENCE
|
|
"rfc-1406"
|
|
::= { wanInterfaceEntry 8}
|
|
|
|
wanInterfaceEntryCrcLength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sixteen-bits(1),
|
|
thirty-two-bits(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Length of the CRC for this interface. Not all platforms
|
|
will allow all options."
|
|
::= { wanInterfaceEntry 9}
|
|
|
|
wanInterfaceEntryLexProtocolEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This switch acts in concert with the wanInterfaceEntryProtocol
|
|
object. To activate LEX, this object should first be set to
|
|
enable (1), then set the wanInterfaceEntryProtocol to PPP. The
|
|
enable will have no effect if PPP is not selected. If the
|
|
wanInterfaceEntryProtocol is selected first, the default NCP of
|
|
BNCP will be selected. To De-select LEX, you must set this
|
|
object to disable (2), and wanInterfaceEntryProtocol to NONE or
|
|
reset the device. Just selecting disable (2) will not tear down
|
|
the connection."
|
|
::= { wanInterfaceEntry 10}
|
|
|
|
wanInterfaceEntryLexProtocolStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bound (1),
|
|
unbound (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object reflects the current state of the link. The device
|
|
is said to be bound to the router when the physical link is OK,
|
|
the LEX negotiation is successful, and the router has been
|
|
configured correctly to communicate with this particular LAN
|
|
Extender."
|
|
::= { wanInterfaceEntry 11}
|
|
|
|
wanInterfaceEntryCompRatio OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ratio of uncompressed to compressed transmitted data.
|
|
If the data compression status is off, 1:1 will be displayed"
|
|
|
|
::= { wanInterfaceEntry 12}
|
|
|
|
wanInterfaceEntryCompStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"On indicates that the compression has been successfully
|
|
negotiated and is operating. Off indicates that the
|
|
compression negotiation has failed and compression is not
|
|
operating at this time, or compression has been terminated
|
|
by either peer."
|
|
::= { wanInterfaceEntry 13}
|
|
|
|
wanInterfaceEntryBackUpIfEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to select the Call-backup option.
|
|
A value of 1 is used to enable the option and a value of
|
|
2 to disable it."
|
|
::= { wanInterfaceEntry 14}
|
|
|
|
-- Wan Ds1 Group
|
|
-- This group is required for any platforms that have a t1 or e1 physical port.
|
|
--
|
|
wanDs1ExtensionsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WanDs1ExtensionsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is an extension to the standard ds1 configuration
|
|
table. It is a list of items that are pertinent to ds1 ports
|
|
on a platform. There is one entry per ds1 physical port on
|
|
the platform"
|
|
::= { ctWanDs1 1 }
|
|
|
|
wanDs1ExtensionsEntry OBJECT-TYPE
|
|
SYNTAX WanDs1ExtensionsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A ds1 extensions entry containing objects relating to
|
|
the particular ds1 physical port"
|
|
INDEX { wanDs1ExtensionsEntryIndex }
|
|
::= { wanDs1ExtensionsTable 1 }
|
|
|
|
WanDs1ExtensionsEntry ::=
|
|
SEQUENCE {
|
|
wanDs1ExtensionsEntryIndex
|
|
INTEGER,
|
|
wanDs1ExtensionsNumInterfaces
|
|
INTEGER,
|
|
wanDs1ExtensionsToggleFracTable
|
|
INTEGER,
|
|
wanDs1ExtensionsLineBuildOut
|
|
INTEGER,
|
|
wanDs1ExtensionsCFADuration
|
|
INTEGER,
|
|
wanDs1ExtensionsDIEnable
|
|
INTEGER,
|
|
wanDs1ExtensionsTotalValidIntervals
|
|
Counter,
|
|
wanDs1ExtensionsBertTestMode
|
|
INTEGER,
|
|
wanDs1ExtensionsBertRun
|
|
INTEGER,
|
|
wanDs1ExtensionsBertCurrentResults
|
|
INTEGER,
|
|
wanDs1ExtensionsBertCumulativeResults
|
|
INTEGER,
|
|
wanDs1ExtensionsBertPeakResults
|
|
INTEGER,
|
|
wanDs1ExtensionsBertAverageResult
|
|
INTEGER,
|
|
wanDs1ExtensionsBertTestPattern
|
|
INTEGER,
|
|
wanDs1ExtensionsBertSamplePeriod
|
|
INTEGER,
|
|
wanDs1ExtensionsBertNumPeriods
|
|
Counter,
|
|
wanDs1ExtensionsBertTestTraps
|
|
INTEGER,
|
|
wanDs1ExtensionsBertDataStatus
|
|
INTEGER
|
|
}
|
|
|
|
wanDs1ExtensionsEntryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each ds1 physical port on the platform."
|
|
::= { wanDs1ExtensionsEntry 1 }
|
|
|
|
wanDs1ExtensionsNumInterfaces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of interfaces on this physical port. This
|
|
number indicates the number of entries this physical port
|
|
uses in the ifTable."
|
|
REFERENCE
|
|
"rfc-1213"
|
|
::= { wanDs1ExtensionsEntry 2 }
|
|
|
|
wanDs1ExtensionsToggleFracTable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
update-table(1),
|
|
display-new(2),
|
|
display-old(3),
|
|
restore-old(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to 1 will cause the Ds1 Fractional Table
|
|
to be updated with the new values, as entered.
|
|
Setting this object to 2, will cause the Ds1 Fractional Table
|
|
to view as the table being entered.
|
|
Setting this object to 3, will cause the Ds1 Fractional Table
|
|
to be the table that is currently in use, regardless of
|
|
any changes being entered.
|
|
Setting this object to 4, will cause any changes that have
|
|
been made to the Ds1 Fractional Table since the last
|
|
update-table to be deleted.
|
|
For physical ports of type synchronous, this object will
|
|
have no affect, and will always return a 1."
|
|
REFERENCE
|
|
"rfc-1406"
|
|
::= { wanDs1ExtensionsEntry 3 }
|
|
|
|
wanDs1ExtensionsLineBuildOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
zero(2),
|
|
minus-7point5(3),
|
|
minus-15(4),
|
|
a133to266feet(5),
|
|
a266to399feet(6),
|
|
a399to533feet(7),
|
|
a533to655feet(8)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The line build out setting for this ds1 physical port.
|
|
Unknown indicates that the setting is neither readable or
|
|
writable."
|
|
::= { wanDs1ExtensionsEntry 4 }
|
|
|
|
wanDs1ExtensionsCFADuration OBJECT-TYPE
|
|
SYNTAX INTEGER(1..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of time (in seconds), that the ds1 port will
|
|
remain in the Carrier Failure Alarm state after the
|
|
alarm condition has cleared."
|
|
::= { wanDs1ExtensionsEntry 5 }
|
|
|
|
wanDs1ExtensionsDIEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2),
|
|
diDataEnabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables or disables Drop and Insert functionality on a
|
|
D/I WPIM. If enabled, all zero assigned timeslots will
|
|
designate D/I interface channels, if disabled all zero
|
|
channels will designate dummy channels as on a T1 or E1.
|
|
If this object is set to diDataEnabled the zero channels
|
|
will designate D/I interface channels and data to and
|
|
from the device will be transmitted or received on the
|
|
D/I port instead of the N/I port."
|
|
::= { wanDs1ExtensionsEntry 6 }
|
|
|
|
wanDs1ExtensionsTotalValidIntervals OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of previous intervals for which
|
|
valid data was collected for the DS1 mib, which
|
|
is currently RFC1406. This counter is similar to
|
|
RFC1406 dsx1ValidIntervals except that the count
|
|
represents the total number of complete 15 minute
|
|
intervals since the ds1 interface has been online,
|
|
and does not stop at the 24 hour period."
|
|
::= { wanDs1ExtensionsEntry 7 }
|
|
|
|
wanDs1ExtensionsBertTestMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(1),
|
|
internal(2),
|
|
manual(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to request that a type of
|
|
process be in control of the testing function.
|
|
This is used to differentiate between automated test
|
|
procedures and those manually controlled by a user.
|
|
When read, this object reflects which type of process
|
|
is actually in control of the testing function. The
|
|
implementation is free to prioritize or deny requests
|
|
in a proprietary manner."
|
|
::= { wanDs1ExtensionsEntry 8 }
|
|
|
|
wanDs1ExtensionsBertRun OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the sending of test data over this physical
|
|
port. The data is a pattern described by
|
|
wanDs1ExtensionsBertTestPattern."
|
|
::= { wanDs1ExtensionsEntry 9 }
|
|
|
|
wanDs1ExtensionsBertCurrentResults OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the results of the testing for the
|
|
last completed sampling period. A non-negative
|
|
number is the error rate in bits per million bits."
|
|
::= { wanDs1ExtensionsEntry 10 }
|
|
|
|
wanDs1ExtensionsBertCumulativeResults OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of errors since the
|
|
testing was enabled. It is not a rate."
|
|
::= { wanDs1ExtensionsEntry 11 }
|
|
|
|
wanDs1ExtensionsBertPeakResults OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the highest value of
|
|
wanDs1ExtensionsBertCurrentResults since the testing
|
|
was enabled. A non-negative number is the error rate
|
|
in bits per million bits."
|
|
::= { wanDs1ExtensionsEntry 12 }
|
|
|
|
wanDs1ExtensionsBertAverageResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the average value of
|
|
wanDs1ExtensionsBertCurrentResults since the testing
|
|
was enabled. A non-negative number is the error rate
|
|
in bits per million bits."
|
|
::= { wanDs1ExtensionsEntry 13 }
|
|
|
|
wanDs1ExtensionsBertTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
patternOther(1),
|
|
pattern1s(2),
|
|
pattern63(3),
|
|
pattern511(4),
|
|
pattern2047(5),
|
|
pattern3in24(6),
|
|
patternQRSS(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to specify the pattern of the
|
|
test data."
|
|
::= { wanDs1ExtensionsEntry 14 }
|
|
|
|
wanDs1ExtensionsBertSamplePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is the duration of time in seconds at
|
|
which the current test results will be periodically
|
|
written to wanDs1ExtensionsBertCurrentResults. The
|
|
range is 1 to 3600, with a default value of 10."
|
|
::= { wanDs1ExtensionsEntry 15 }
|
|
|
|
wanDs1ExtensionsBertNumPeriods OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The number of sampling periods that have elapsed
|
|
during the current test run."
|
|
::= { wanDs1ExtensionsEntry 16 }
|
|
|
|
wanDs1ExtensionsBertTestTraps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the sending
|
|
of a trap at the conclusion of the measurement period.
|
|
The trap will contain the information described by
|
|
ctDs1BertCurrentResults. The default value is disabled."
|
|
::= { wanDs1ExtensionsEntry 17 }
|
|
|
|
wanDs1ExtensionsBertDataStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
waitingForLink(2),
|
|
waitingForLoopback(3),
|
|
running(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object provides the operating status of the
|
|
transmission of test data packets."
|
|
::= { wanDs1ExtensionsEntry 18 }
|
|
|
|
-- Wan Rs232 Group
|
|
-- This group is only required if any physical port on the system can be
|
|
-- classified as rs232-like
|
|
--
|
|
wanRs232ExtensionsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WanRs232ExtensionsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is an extension to the standard rs232-like mib.
|
|
It is a list of items that are pertinent to rs232-like ports
|
|
on a platform. There is one entry per synchronous physical
|
|
port on the platform."
|
|
REFERENCE
|
|
"rfc-1317"
|
|
::= { ctWanRs232 1 }
|
|
|
|
wanRs232ExtensionsEntry OBJECT-TYPE
|
|
SYNTAX WanRs232ExtensionsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A rs232-like extensions entry containing objects relating to
|
|
the particular rs232-like physical port."
|
|
INDEX { wanRs232ExtensionsEntryIndex }
|
|
::= { wanRs232ExtensionsTable 1 }
|
|
|
|
WanRs232ExtensionsEntry ::=
|
|
SEQUENCE {
|
|
wanRs232ExtensionsEntryIndex
|
|
INTEGER,
|
|
wanRs232ExtensionsCTSEnable
|
|
INTEGER,
|
|
wanRs232ExtensionsDSREnable
|
|
INTEGER
|
|
}
|
|
|
|
wanRs232ExtensionsEntryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each rs232-like physical port on
|
|
the platform."
|
|
::= { wanRs232ExtensionsEntry 1 }
|
|
|
|
wanRs232ExtensionsCTSEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates whether the platform should generate
|
|
CTS. When disabled the platform will not generate CTS, when
|
|
enabled, the platform will generate CTS. The actual state
|
|
of the CTS line is available in the rs-232 like mib."
|
|
REFERENCE
|
|
"rfc-1317"
|
|
DEFVAL { disable }
|
|
::= { wanRs232ExtensionsEntry 2 }
|
|
|
|
wanRs232ExtensionsDSREnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates whether the platform should generate
|
|
DSR. When disabled the platform will not generate DSR, when
|
|
enabled, the platform will generate DSR. The actual state
|
|
of the DSR line is available in the rs-232 like mib."
|
|
REFERENCE
|
|
"rfc-1317 "
|
|
DEFVAL { disable }
|
|
::= { wanRs232ExtensionsEntry 3 }
|
|
|
|
-- ctFrDcp Group
|
|
-- This group is mandatory to support Data Compression Protocol
|
|
-- (DCP following FRF.9) for per virtual circuit basis
|
|
|
|
frDcpCircuitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FrDcpCircuitEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing data compression information about
|
|
specific Data Link Connection Identifiers and corresponding
|
|
virtual circuit. This information is used to support the
|
|
frCircuitTable following RFC-1315."
|
|
::= { ctFrDcp 1 }
|
|
|
|
frDcpCircuitEntry OBJECT-TYPE
|
|
SYNTAX FrDcpCircuitEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The data compression information regarding a single Data
|
|
Link Connection Identifier."
|
|
INDEX { frDcpCircuitIfIndex, frDcpCircuitDlci }
|
|
::= { frDcpCircuitTable 1 }
|
|
|
|
FrDcpCircuitEntry ::=
|
|
SEQUENCE {
|
|
frDcpCircuitIfIndex
|
|
Index,
|
|
frDcpCircuitDlci
|
|
DLCI,
|
|
frDcpCircuitEnable
|
|
INTEGER,
|
|
frDcpCircuitStatus
|
|
INTEGER,
|
|
frDcpCircuitRatio
|
|
OCTET STRING
|
|
}
|
|
|
|
frDcpCircuitIfIndex OBJECT-TYPE
|
|
SYNTAX Index
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ifIndex value of ifEntry that this DCP virtual circuit
|
|
object is layered onto."
|
|
::= { frDcpCircuitEntry 1 }
|
|
|
|
frDcpCircuitDlci OBJECT-TYPE
|
|
SYNTAX DLCI
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Data Link Connection Identifier for this DCP virtual
|
|
circuit object."
|
|
REFERENCE
|
|
"Draft American National Standard T1.618-1991, Section 3.3.6"
|
|
::= { frDcpCircuitEntry 2 }
|
|
|
|
frDcpCircuitEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2) -- default
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether data compression should take place on
|
|
this particular end side virtual circuit."
|
|
::= { frDcpCircuitEntry 3 }
|
|
|
|
frDcpCircuitStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"On indicates that the compression has been successfully
|
|
negotiated and is operating. Off indicates that the
|
|
compression negotiation has failed and compression is not
|
|
operating at this time, or compression has been terminated
|
|
by either peer."
|
|
::= { frDcpCircuitEntry 4 }
|
|
|
|
frDcpCircuitRatio OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ratio of uncompressed to compressed transmitted data.
|
|
If the data compression status is off, 1:1 will be displayed"
|
|
::= { frDcpCircuitEntry 5 }
|
|
|
|
--
|
|
-- Wan DDS Group
|
|
-- This group is required for any platforms that have a dds physical port.
|
|
--
|
|
|
|
ddsConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DdsConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DDS Configuration Table"
|
|
::= { ctDDS 1}
|
|
|
|
ddsConfigEntry OBJECT-TYPE
|
|
SYNTAX DdsConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An Entry in the DDS Configuration Table"
|
|
INDEX { ddsLineIndex }
|
|
::= { ddsConfigTable 1 }
|
|
|
|
DdsConfigEntry ::=
|
|
SEQUENCE {
|
|
ddsLineIndex
|
|
INTEGER,
|
|
ddsIfIndex
|
|
INTEGER,
|
|
ddsLineMode
|
|
INTEGER,
|
|
ddsLineCoding
|
|
INTEGER,
|
|
ddsLoopbackConfig
|
|
INTEGER,
|
|
ddsLineStatus
|
|
INTEGER,
|
|
ddsTxClockSource
|
|
INTEGER,
|
|
ddsPortInSpeed
|
|
INTEGER,
|
|
ddsPortOutSpeed
|
|
INTEGER
|
|
}
|
|
|
|
ddsLineIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7fffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each dds physical port on the
|
|
platform"
|
|
::= { ddsConfigEntry 1 }
|
|
|
|
ddsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7fffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index associated with this dds physical port"
|
|
::= { ddsConfigEntry 2 }
|
|
|
|
ddsLineMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ddsPri (1),
|
|
ddsCc (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DDS-PRI is full duplex 56k link, No framing in loop
|
|
data so loop speed is also 56k. Data stream:
|
|
--d1 d2 d3 d4 d5 d6 d7--
|
|
|
|
DDS-CC is full duplex 64k link. Does not require framing
|
|
bit but uses a same format as SC, ninth bit position is
|
|
lumped with primary channel and not used for control.
|
|
Loop speed is 72k, Primary channel rate is 64k.
|
|
--d1 d2 d3 d4 d5 d6 d7 F d8--"
|
|
::= { ddsConfigEntry 3 }
|
|
|
|
ddsLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ddsNone (1),
|
|
ddsJBZS (2),
|
|
otherLineCode (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object describes the variety of Zero Code
|
|
suppression on this interface. JBZS refers to Jammed
|
|
Bit Zero suppression, which forces a 1 bit every 8 bit
|
|
periods. None refers to a mode in which some other
|
|
means is used to insure pulse density requirements."
|
|
::= { ddsConfigEntry 4 }
|
|
|
|
ddsLoopbackConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ddsNoLoop (1),
|
|
ddsLineLoop (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable represents the loop-back configuration
|
|
of the DDS interface. ddsNoLoop means the interface is
|
|
not in loop-back state, and LineLoop means the the
|
|
received data is looped back out."
|
|
::= { ddsConfigEntry 5 }
|
|
|
|
ddsLineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ddsNoAlarm (1),
|
|
ddsLossOfSignal (2),
|
|
ddsOutOfService (3),
|
|
ddsOutOfFrame (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This describes the current operational
|
|
status of DDS line."
|
|
::= { ddsConfigEntry 6 }
|
|
|
|
ddsTxClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ddsLoopTiming (1),
|
|
ddsLocalTiming (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source of Transmit clock.
|
|
ddsLoopTiming - indicates that the recovered receive
|
|
clock is used as transmit clock.
|
|
ddsLocalTiming - indicates that a local clock source is
|
|
used."
|
|
::= { ddsConfigEntry 7 }
|
|
|
|
ddsPortInSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This variable describes the current operational
|
|
receive speed of DDS line. It is a read only value
|
|
based entirely on DDS type (CC or PRI)."
|
|
::= { ddsConfigEntry 8 }
|
|
|
|
ddsPortOutSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable describes the current operational
|
|
transmit speed of DDS line. It is a read only value
|
|
based entirely on DDS type CC or PRI"
|
|
::= { ddsConfigEntry 9 }
|
|
|
|
--
|
|
-- Wan Alarms Group
|
|
-- This group is required for any platforms that support
|
|
-- Cabletron's WAN Alarm processing functionality
|
|
--
|
|
|
|
--
|
|
-- DS1 Alarms Global Configuration Variables
|
|
--
|
|
-- These parameters apply globally to the DS1 Alarms
|
|
-- entity. These variables allow the user to program
|
|
-- DS1 alarm characteristics to be the same for all DS1
|
|
-- lines installed in the device. The other option
|
|
-- available to the user would be to configure each DS1
|
|
-- line individually, using the parameters in the DS1
|
|
-- Alarms Configuration Table.
|
|
--
|
|
|
|
ds1AlarmsGlobalConfigGroup OBJECT IDENTIFIER ::= { ctDs1Alarms 1 }
|
|
|
|
ds1AlarmGlobalAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1), -- default
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
Monitoring Application for all DS1 circuits on the
|
|
device."
|
|
::= { ds1AlarmsGlobalConfigGroup 1}
|
|
|
|
ds1AlarmGlobalAutoRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2) -- default
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
Automatic Recovery feature for all DS1 circuits on
|
|
the device. For those devices that support ds1
|
|
alarm monitoring, but do not support the automatic
|
|
recovery feature, this object always returns disabled,
|
|
and performs no action when written."
|
|
::= { ds1AlarmsGlobalConfigGroup 2}
|
|
|
|
ds1AlarmGlobalTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2) -- default
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
SNMP Trap generation feature for all DS1 circuits on
|
|
the device. This object operates in conjunction with
|
|
configuration of objects in the ctron-trap-mib.txt"
|
|
::= { ds1AlarmsGlobalConfigGroup 3}
|
|
|
|
ds1AlarmGlobalESCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..300) -- default is 100
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used in conjuction with ctDs1AlarmESInterval to set
|
|
the threshold for alarm generation when the number of
|
|
Errored Seconds for a specified time interval,
|
|
measured in minutes, is exceeded. The default
|
|
Errored Seconds alarm condition is 100 errored seconds
|
|
over a 6 minute time interval."
|
|
::= { ds1AlarmsGlobalConfigGroup 4}
|
|
|
|
ds1AlarmGlobalESInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15) -- default is 6 minutes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used in conjuction with ds1AlarmGlobalESCount to
|
|
set the threshold for alarm generation when the number
|
|
of Errored Seconds for a specified time interval,
|
|
measured in minutes, is exceeded. The default
|
|
Errored Seconds alarm condition is 100 errored seconds
|
|
over a 6 minute time interval."
|
|
::= { ds1AlarmsGlobalConfigGroup 5}
|
|
|
|
ds1AlarmGlobalBPVErrorRate OBJECT-TYPE
|
|
SYNTAX INTEGER (5..9) -- default is 6
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the negative exponent of 10, used in
|
|
monitoring Bipolar Violations (Code Violations for E1)
|
|
over intervals defined by ds1AlarmGlobalBPVInterval.
|
|
For example, for a ds1AlarmGlobalBPVErrorRate value
|
|
of 6 used with a ds1AlarmGlobalBPVInterval of 15,
|
|
an alarm is generated when a 15 minute period has an
|
|
average error rate which exceeds 1 Bipolar Violation
|
|
(Code Violation for E1) per million bits.
|
|
For those devices that support ds1 alarm monitoring
|
|
but who's hardware does not support detect bipolar
|
|
violations, this object always returns the default,
|
|
and performs no action when written."
|
|
::= { ds1AlarmsGlobalConfigGroup 6}
|
|
|
|
ds1AlarmGlobalBPVInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15) -- default is 15 minutes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the interval, used in monitoring
|
|
Bipolar Violations (Code Violations for E1)
|
|
with thresholds defined by ds1AlarmGlobalBPVErrorRate.
|
|
For example, for a ds1AlarmGlobalBPVErrorRate value
|
|
of 6 used with a ds1AlarmGlobalBPVInterval of 15, an
|
|
alarm is generated when a 15 minute period has an
|
|
average error rate which exceeds 1 Bipolar Violation
|
|
(Code Violation for E1) per million bits.
|
|
For those devices that support ds1 alarm monitoring
|
|
but who's hardware does not detect bipolar
|
|
violations, this object always returns the default,
|
|
and performs no action when written."
|
|
::= { ds1AlarmsGlobalConfigGroup 7}
|
|
|
|
ds1AlarmGlobalManualRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
recover(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"To cause a manual recovery to occur on all Ds1 circuits, this
|
|
object is set to a 1. It is always read as a 1. The recovery
|
|
will occur only when automatic recovery is disabled."
|
|
::= { ds1AlarmsGlobalConfigGroup 8}
|
|
|
|
--
|
|
-- DS1 Alarms Configuration Table
|
|
--
|
|
-- The DS1 alarm table structure contains the same information as the
|
|
-- global configuration objects, but allows seperate configuratoin of
|
|
-- specific DS1 circuits contained on the device
|
|
--
|
|
ds1AlarmConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ds1AlarmConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table containing objects used to configure DS1 alarm
|
|
functionality on a per DS1 basis."
|
|
::= { ctDs1Alarms 2 }
|
|
|
|
ds1AlarmConfigEntry OBJECT-TYPE
|
|
SYNTAX Ds1AlarmConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A description of a single entry."
|
|
INDEX { ds1PhysNum }
|
|
::= { ds1AlarmConfigTable 1 }
|
|
|
|
Ds1AlarmConfigEntry ::=
|
|
SEQUENCE {
|
|
ds1PhysNum
|
|
INTEGER,
|
|
ds1AlarmAdmin
|
|
INTEGER,
|
|
ds1AlarmAutoRecovery
|
|
INTEGER,
|
|
ds1AlarmTrapEnable
|
|
INTEGER,
|
|
ds1AlarmESCount
|
|
INTEGER,
|
|
ds1AlarmESInterval
|
|
INTEGER,
|
|
ds1AlarmBPVErrorRate
|
|
INTEGER,
|
|
ds1AlarmBPVInterval
|
|
INTEGER,
|
|
ds1AlarmManualRecovery
|
|
INTEGER
|
|
}
|
|
|
|
ds1PhysNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value for this object is equal to the value
|
|
of a unique physical connection identifier associated
|
|
with this DS1 which is clearly labeled on the device.
|
|
For those products that do not have a DS1 identifier
|
|
labeled on the device, the value for this object is
|
|
the same as rfc1406 dsx1LineIndex."
|
|
::= { ds1AlarmConfigEntry 1 }
|
|
|
|
ds1AlarmAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1), -- default
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
Monitoring Application for this DS1 circuit."
|
|
::= { ds1AlarmConfigEntry 2}
|
|
|
|
ds1AlarmAutoRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2) -- default
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
Automatic Recovery feature for this DS1 circuit.
|
|
For those devices that support ds1
|
|
alarm monitoring, but do not support the automatic
|
|
recovery feature, this object always returns disabled,
|
|
and performs no action when written."
|
|
::= { ds1AlarmConfigEntry 3}
|
|
|
|
ds1AlarmTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2) -- default
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the DS1 Alarm
|
|
SNMP Trap generation feature for this DS1 circuit.
|
|
This object operates in conjunction with configuration
|
|
of objects in the ctron-trap-mib.txt"
|
|
::= { ds1AlarmConfigEntry 4}
|
|
|
|
ds1AlarmESCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..300) -- default is 100
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used in conjuction with ctDs1AlarmESInterval to set
|
|
the threshold for alarm generation when the number of
|
|
Errored Seconds for a specified time interval, measured
|
|
in minutes, is exceeded. The default Errored Seconds
|
|
alarm condition is 100 errored seconds over a 6 minute
|
|
time interval."
|
|
::= { ds1AlarmConfigEntry 5}
|
|
|
|
ds1AlarmESInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15) -- default is 6 minutes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used in conjuction with ctDs1AlarmESCount to set the
|
|
threshold for alarm generation when the number of
|
|
Errored Seconds for a specified time interval, measured
|
|
in minutes, is exceeded. The default Errored Seconds
|
|
alarm condition is 100 errored seconds over a 6 minute
|
|
time interval."
|
|
::= { ds1AlarmConfigEntry 6}
|
|
|
|
ds1AlarmBPVErrorRate OBJECT-TYPE
|
|
SYNTAX INTEGER (5..9) -- default is 6
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the negative exponent of 10, used in
|
|
monitoring Bipolar Violations (Code Violations for E1)
|
|
over intervals defined by ds1AlarmBPVInterval. For
|
|
example, for a ds1AlarmBPVErrorRate value of 6 used
|
|
with a ds1AlarmBPVInterval of 15, an alarm is generated
|
|
when a 15 minute period has an average error rate which
|
|
exceeds 1 Bipolar Violation (Code Violation for E1) per
|
|
million bits.
|
|
For those devices that support ds1 alarm monitoring
|
|
but who's hardware does not support detect bipolar
|
|
violations, this object always returns the default,
|
|
and performs no action when written."
|
|
::= { ds1AlarmConfigEntry 7}
|
|
|
|
ds1AlarmBPVInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15) -- default is 15 minutes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the interval, used in
|
|
monitoring Bipolar Violations (Code Violations for E1)
|
|
with thresholds defined by ds1AlarmBPVErrorRate. For
|
|
example, for a ds1AlarmBPVErrorRate value of 6 used
|
|
with a ds1AlarmBPVInterval of 15, an alarm is generated
|
|
when a 15 minute period has an average error rate
|
|
which exceeds 1 Bipolar Violation (Code Violation for
|
|
E1) per million bits.
|
|
For those devices that support ds1 alarm monitoring
|
|
but who's hardware does not support detect bipolar
|
|
violations, this object always returns the default,
|
|
and performs no action when written."
|
|
::= { ds1AlarmConfigEntry 8}
|
|
|
|
ds1AlarmManualRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
recover(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"To cause a manual recovery to occur, this object is set
|
|
to a 1. It is always read as a 1. The recovery will
|
|
occur only when automatic recovery is disabled."
|
|
::= { ds1AlarmConfigEntry 9}
|
|
|
|
--
|
|
-- Wan Internet Protocol Priority Queue Filters Group
|
|
-- This group is required for any platforms that support
|
|
-- Cabletron's WAN IP Priority Queue processing functionality
|
|
--
|
|
|
|
--
|
|
-- IP PQ Configuration Variables
|
|
--
|
|
-- These parameters apply to the IP Priority Queue
|
|
-- entity. These variables allow the user to program
|
|
-- IP addresses in a filtering database. The database
|
|
-- of IP addresses are used when a WAN service is over
|
|
-- subscribed, and the packet would normally be discarded.
|
|
-- If the IP PQ admin status is enabled, and the IP
|
|
-- address of the packet to be discarded matches one
|
|
-- programmed in the database, an attempt will be made
|
|
-- to use high priority, reserved, resources to transmit
|
|
-- the packet. The addresses programmed in this table
|
|
-- should be reserved for those packets which MUST be
|
|
-- transmitted. Some examples would be RIP, and SNMP
|
|
-- packets, who's loss would cause major networking
|
|
-- problems for the system.
|
|
--
|
|
|
|
ipPQConfigGroup OBJECT IDENTIFIER ::= { ctIPPQFilters 1 }
|
|
|
|
ipPQAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1), -- default
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to enable and disable the IP Priority Queue
|
|
Forwarding Application."
|
|
::= { ipPQConfigGroup 1}
|
|
|
|
iPPQMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the maximum number of IP address entries
|
|
supported by the IP Priority Queue application on
|
|
this device."
|
|
::= { ipPQConfigGroup 2}
|
|
|
|
iPPQNumEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get the number of IP address entries currently
|
|
programmed in the ipPQAddressTable."
|
|
::= { ipPQConfigGroup 3}
|
|
|
|
iPPQAddAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an IP address to the ipPQAddressTable. Always
|
|
read as a 0.0.0.0."
|
|
::= { ipPQConfigGroup 4 }
|
|
|
|
iPPQDelAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delete an IP address from the ipPQAddressTable.
|
|
Always read as a 0.0.0.0."
|
|
::= { ipPQConfigGroup 5 }
|
|
|
|
--
|
|
--
|
|
--
|
|
-- IP Priority Queue Address Table
|
|
--
|
|
-- The IP PQ table contains a list of IP adresses used with the
|
|
-- Priority Queue filtering mechanism.
|
|
--
|
|
ipPQAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpPQAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table containing IP addresses, used in an
|
|
IP Priority Queue Forwarding function."
|
|
::= { ctIPPQFilters 2 }
|
|
|
|
ipPQAddressEntry OBJECT-TYPE
|
|
SYNTAX IpPQAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A description of a single entry."
|
|
INDEX { ipPQAddressId }
|
|
::= { ipPQAddressTable 1 }
|
|
|
|
IpPQAddressEntry ::=
|
|
SEQUENCE {
|
|
ipPQAddressId
|
|
INTEGER,
|
|
ipPQIPAddress
|
|
IpAddress
|
|
}
|
|
|
|
ipPQAddressId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value identifying an element in a sequence
|
|
of IP PQ address entries."
|
|
::= { ipPQAddressEntry 1 }
|
|
|
|
ipPQIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns an IP address associated with a specific
|
|
entry in this table."
|
|
::= { ipPQAddressEntry 2 }
|
|
|
|
--
|
|
-- HDSL 15 Minute Performance History Table
|
|
-- This group provides counters for UnAvailable Seconds and
|
|
-- Errored Seconds of all HDSL connections
|
|
--
|
|
|
|
ctWanHDSLPerformance15mTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLPerformance15mEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL 15 minute performance table. This table provides the
|
|
accumulated counts of errored seconds (ES) and unavailable
|
|
seconds (UAS) for the HDSL line including the local, remote
|
|
units and any doublers in between during a 15 minutes period
|
|
for the last 24 hours.
|
|
|
|
The table is indexed by the non-empty slot in the device and
|
|
the 15-minute history slot within the last 24 hours period."
|
|
::= { ctWanHDSLExt 1 }
|
|
|
|
ctWanHDSLPerformance15mEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLPerformance15mEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries in the 15 minute performance table"
|
|
INDEX
|
|
{ ctWanHDSLPerformance15mConnIndex, ctWanHDSLPerformance15mSlotIndex }
|
|
::= { ctWanHDSLPerformance15mTable 1 }
|
|
|
|
CtWanHDSLPerformance15mEntry ::= SEQUENCE {
|
|
ctWanHDSLPerformance15mConnIndex
|
|
INTEGER,
|
|
ctWanHDSLPerformance15mSlotIndex
|
|
INTEGER,
|
|
ctWanHDSLHLULoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLHLULoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLHLULoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLHLULoop2ES15m
|
|
INTEGER,
|
|
ctWanHDSLHRULoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLHRULoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLHRULoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLHRULoop2ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop2ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop2ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop2ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop1UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop1ES15m
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop2UAS15m
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop2ES15m
|
|
INTEGER
|
|
}
|
|
|
|
ctWanHDSLPerformance15mConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify the HDSL connection within the device, indexing from
|
|
1 to the maximum allowed number of HDSL connections in the
|
|
device."
|
|
::= { ctWanHDSLPerformance15mEntry 1 }
|
|
|
|
ctWanHDSLPerformance15mSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Define which 15-minute slot history of the HDSL within the
|
|
24 hour period. Indexing from 1 - 97 with the first index
|
|
representing the current 15-minute history"
|
|
::= { ctWanHDSLPerformance15mEntry 2 }
|
|
|
|
--
|
|
-- Local line unit's 15 minute performance history
|
|
--
|
|
|
|
ctWanHDSLHLULoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the local line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 3 }
|
|
|
|
ctWanHDSLHLULoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the local line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 4 }
|
|
|
|
ctWanHDSLHLULoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the local line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 5 }
|
|
|
|
ctWanHDSLHLULoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the local line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 6 }
|
|
|
|
--
|
|
-- Remote line unit's 15-minute performance history
|
|
--
|
|
|
|
ctWanHDSLHRULoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the remote line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 7 }
|
|
|
|
ctWanHDSLHRULoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the remote line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 8 }
|
|
|
|
ctWanHDSLHRULoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the remote line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 9 }
|
|
|
|
ctWanHDSLHRULoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the remote line unit during
|
|
the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 10 }
|
|
|
|
--
|
|
-- Doubler 1's 15-minute performance history
|
|
--
|
|
|
|
ctWanHDSLDb1NetworkLoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 11 }
|
|
|
|
ctWanHDSLDb1NetworkLoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the first doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 12 }
|
|
|
|
ctWanHDSLDb1NetworkLoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 13 }
|
|
|
|
ctWanHDSLDb1NetworkLoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the first doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 14 }
|
|
|
|
ctWanHDSLDb1CustomerLoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 15 }
|
|
|
|
ctWanHDSLDb1CustomerLoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the first doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 16 }
|
|
|
|
ctWanHDSLDb1CustomerLoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 17 }
|
|
|
|
ctWanHDSLDb1CustomerLoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the first doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 18 }
|
|
|
|
--
|
|
-- Doubler 2's 15-minute performance history
|
|
--
|
|
|
|
ctWanHDSLDb2NetworkLoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 19 }
|
|
|
|
ctWanHDSLDb2NetworkLoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the second doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 20 }
|
|
|
|
ctWanHDSLDb2NetworkLoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 21 }
|
|
|
|
ctWanHDSLDb2NetworkLoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the second doubler unit's
|
|
network side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 22 }
|
|
|
|
ctWanHDSLDb2CustomerLoop1UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 23 }
|
|
|
|
ctWanHDSLDb2CustomerLoop1ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the second doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 24 }
|
|
|
|
ctWanHDSLDb2CustomerLoop2UAS15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 25 }
|
|
|
|
ctWanHDSLDb2CustomerLoop2ES15m OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the second doubler unit's
|
|
customer side during the 15-minute period."
|
|
::= { ctWanHDSLPerformance15mEntry 26 }
|
|
|
|
--
|
|
-- HDSL 24 hour Performance History Table
|
|
-- This group provides counters for UnAvailable Seconds and
|
|
-- Errored Seconds of all HDSL connections
|
|
--
|
|
|
|
ctWanHDSLPerformance24hTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLPerformance24hEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL 24-hour performance table. This table provides the
|
|
accumulated counts of errored seconds (ES) and unavailable
|
|
seconds (UAS) for the HDSL line including the local, remote
|
|
units and any doublers in between during a 24-hour period
|
|
for the last 7 days.
|
|
|
|
The table is indexed by the non-empty slot in the device and
|
|
the 24-hour history slot within the last 7 days period."
|
|
::= { ctWanHDSLExt 2 }
|
|
|
|
ctWanHDSLPerformance24hEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLPerformance24hEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries in the 24-hour ctWanHDSLPerformance table"
|
|
INDEX
|
|
{ ctWanHDSLPerformance24hConnIndex, ctWanHDSLPerformance24hSlotIndex }
|
|
::= { ctWanHDSLPerformance24hTable 1 }
|
|
|
|
CtWanHDSLPerformance24hEntry ::= SEQUENCE {
|
|
ctWanHDSLPerformance24hConnIndex
|
|
INTEGER,
|
|
ctWanHDSLPerformance24hSlotIndex
|
|
INTEGER,
|
|
ctWanHDSLHLULoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLHLULoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLHLULoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLHLULoop2ES24h
|
|
INTEGER,
|
|
ctWanHDSLHRULoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLHRULoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLHRULoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLHRULoop2ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb1NetworkLoop2ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb1CustomerLoop2ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb2NetworkLoop2ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop1UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop1ES24h
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop2UAS24h
|
|
INTEGER,
|
|
ctWanHDSLDb2CustomerLoop2ES24h
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
-- Local line unit's 24-hour performance history
|
|
--
|
|
|
|
ctWanHDSLPerformance24hConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify the HDSL connection within the device, indexing from
|
|
1 to the maximum allowed number of HDSL connections in the
|
|
device."
|
|
::= { ctWanHDSLPerformance24hEntry 1 }
|
|
|
|
ctWanHDSLPerformance24hSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Define which 24-hour slot history of the HDSL within the
|
|
last 7 days period. Indexing from 1 - 8 with the first index
|
|
representing the current 24 hour history"
|
|
::= { ctWanHDSLPerformance24hEntry 2 }
|
|
|
|
ctWanHDSLHLULoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the local line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 3 }
|
|
|
|
ctWanHDSLHLULoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the local line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 4 }
|
|
|
|
ctWanHDSLHLULoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the local line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 5 }
|
|
|
|
ctWanHDSLHLULoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the local line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 6 }
|
|
|
|
--
|
|
-- Remote line unit's 24 hour performance history
|
|
--
|
|
|
|
ctWanHDSLHRULoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the remote line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 7 }
|
|
|
|
ctWanHDSLHRULoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the remote line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 8 }
|
|
|
|
ctWanHDSLHRULoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the remote line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 9 }
|
|
|
|
ctWanHDSLHRULoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the remote line unit during
|
|
the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 10 }
|
|
|
|
--
|
|
-- Doubler 1's 15-minute performance history
|
|
--
|
|
|
|
ctWanHDSLDb1NetworkLoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 11 }
|
|
|
|
ctWanHDSLDb1NetworkLoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the first doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 12 }
|
|
|
|
ctWanHDSLDb1NetworkLoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 13 }
|
|
|
|
ctWanHDSLDb1NetworkLoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the first doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 14 }
|
|
|
|
ctWanHDSLDb1CustomerLoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 15 }
|
|
|
|
ctWanHDSLDb1CustomerLoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the first doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 16 }
|
|
|
|
ctWanHDSLDb1CustomerLoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 17 }
|
|
|
|
ctWanHDSLDb1CustomerLoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the first doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 18 }
|
|
|
|
--
|
|
-- Doubler 2's 24-hour performance history
|
|
--
|
|
|
|
ctWanHDSLDb2NetworkLoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 19 }
|
|
|
|
ctWanHDSLDb2NetworkLoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the second doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 20 }
|
|
|
|
ctWanHDSLDb2NetworkLoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 21 }
|
|
|
|
ctWanHDSLDb2NetworkLoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the second doubler unit's
|
|
network side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 22 }
|
|
|
|
ctWanHDSLDb2CustomerLoop1UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 23 }
|
|
|
|
ctWanHDSLDb2CustomerLoop1ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 1 of the second doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 24 }
|
|
|
|
ctWanHDSLDb2CustomerLoop2UAS24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 25 }
|
|
|
|
ctWanHDSLDb2CustomerLoop2ES24h OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Errored seconds (ES) on LOOP 2 of the second doubler unit's
|
|
customer side during the 24-hour period."
|
|
::= { ctWanHDSLPerformance24hEntry 26 }
|
|
|
|
----------------------------------------------------
|
|
-- HDSL Statistics Table
|
|
-- This group provides HDSL line statistics
|
|
----------------------------------------------------
|
|
|
|
ctWanHDSLStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table collects the statistics for the Signal noise ratio
|
|
(SNR), and the pulse attenuation of the HDSL line, including
|
|
the local, remote units and the doublers in between."
|
|
::= { ctWanHDSLExt 3 }
|
|
|
|
ctWanHDSLStatisticsEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries of the HDSL statistics table "
|
|
INDEX
|
|
{ ctWanHDSLStatisticsHLUConnIndex }
|
|
::= { ctWanHDSLStatisticsTable 1 }
|
|
|
|
CtWanHDSLStatisticsEntry ::= SEQUENCE {
|
|
ctWanHDSLStatisticsHLUConnIndex
|
|
INTEGER,
|
|
ctWanHDSLSNRHLULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowHLULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighHLULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHLULoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowHLULoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighHLULoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationHLULoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationHLULoop2
|
|
INTEGER,
|
|
ctWanHDSLBitStat1HLU
|
|
INTEGER,
|
|
ctWanHDSLSNRHRULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowHRULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighHRULoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHRULoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowHRULoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighHRULoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationHRULoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationHRULoop2
|
|
INTEGER,
|
|
ctWanHDSLDs1FrameHRU
|
|
INTEGER,
|
|
ctWanHDSLSNRDb1NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb1NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb1NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRDb1NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb1NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb1NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRDb1CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb1CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb1CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRDb1CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb1CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb1CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb1NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb1NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb1CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb1CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRDb2NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb2NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb2NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRDb2NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb2NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb2NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRDb2CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb2CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb2CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLSNRDb2CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRLowDb2CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLSNRHighDb2CustomerLoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb2NetworkLoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb2NetworkLoop2
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb2CustomerLoop1
|
|
INTEGER,
|
|
ctWanHDSLPulseAttenuationDb2CustomerLoop2
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
-- Local line unit's statistics
|
|
--
|
|
|
|
ctWanHDSLStatisticsHLUConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify the HDSL connection occupied in the device,
|
|
indexing from 1 to the maximum allowed connections in
|
|
the device."
|
|
::= { ctWanHDSLStatisticsEntry 1 }
|
|
|
|
ctWanHDSLSNRHLULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 2 }
|
|
|
|
ctWanHDSLSNRLowHLULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 3 }
|
|
|
|
ctWanHDSLSNRHighHLULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 4 }
|
|
|
|
ctWanHDSLSNRHLULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 5 }
|
|
|
|
ctWanHDSLSNRLowHLULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 6 }
|
|
|
|
ctWanHDSLSNRHighHLULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 7 }
|
|
|
|
ctWanHDSLPulseAttenuationHLULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 1 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 8 }
|
|
|
|
ctWanHDSLPulseAttenuationHLULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 2 of the local line unit."
|
|
::= { ctWanHDSLStatisticsEntry 9 }
|
|
|
|
ctWanHDSLBitStat1HLU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A byte value which contains product specific information:
|
|
|
|
bit 0 - System in AIS on the local line unit.
|
|
1 - System in AIS on the remote line unit.
|
|
2 - Channels are reversed on the remote line unit.
|
|
3 - Channels are reversed on the doubler 1.
|
|
4 - Channels are reversed on the doubler 2.
|
|
5 - Power is fed to the next unit on the local line unit.
|
|
6 - Power is fed to the next unit on the remote line unit.
|
|
7 - Smartloop is active on remote line unit. (HiGain only)"
|
|
::= { ctWanHDSLStatisticsEntry 10 }
|
|
|
|
--
|
|
-- Remote line unit's statistics
|
|
--
|
|
|
|
ctWanHDSLSNRHRULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 11 }
|
|
|
|
ctWanHDSLSNRLowHRULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 12 }
|
|
|
|
ctWanHDSLSNRHighHRULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 13 }
|
|
|
|
ctWanHDSLSNRHRULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 14 }
|
|
|
|
ctWanHDSLSNRLowHRULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 15 }
|
|
|
|
|
|
ctWanHDSLSNRHighHRULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 16 }
|
|
|
|
ctWanHDSLPulseAttenuationHRULoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 1 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 17 }
|
|
|
|
ctWanHDSLPulseAttenuationHRULoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 2 of the remote line unit."
|
|
::= { ctWanHDSLStatisticsEntry 18 }
|
|
|
|
ctWanHDSLDs1FrameHRU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Byte value shows DS1 frame and code information for the remote
|
|
line unit (HiGain only):
|
|
|
|
bit 0:1 -
|
|
0 - frame format is SF.
|
|
1 - frame format is ESF.
|
|
2 - Frame format is unframed.
|
|
3 - no activity.
|
|
|
|
bit 2:3 -
|
|
reserved.
|
|
|
|
bit 4 -
|
|
0 - line code is AMI
|
|
1 - line code is B8ZS.
|
|
|
|
bit 5:7 -
|
|
reserved."
|
|
|
|
::= { ctWanHDSLStatisticsEntry 19 }
|
|
|
|
--
|
|
-- Doubler 1's statistics
|
|
--
|
|
|
|
ctWanHDSLSNRDb1NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of doubler 1's network side"
|
|
::= { ctWanHDSLStatisticsEntry 20 }
|
|
|
|
ctWanHDSLSNRLowDb1NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of doubler 1's network side"
|
|
::= { ctWanHDSLStatisticsEntry 21 }
|
|
|
|
ctWanHDSLSNRHighDb1NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of doubler 1's network side"
|
|
::= { ctWanHDSLStatisticsEntry 22 }
|
|
|
|
ctWanHDSLSNRDb1NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of doubler 1's network side."
|
|
::= { ctWanHDSLStatisticsEntry 23 }
|
|
|
|
ctWanHDSLSNRLowDb1NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of doubler 1's network side."
|
|
::= { ctWanHDSLStatisticsEntry 24 }
|
|
|
|
ctWanHDSLSNRHighDb1NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of doubler 1's network side."
|
|
::= { ctWanHDSLStatisticsEntry 25 }
|
|
|
|
ctWanHDSLSNRDb1CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 26 }
|
|
|
|
ctWanHDSLSNRLowDb1CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 27 }
|
|
|
|
ctWanHDSLSNRHighDb1CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 28 }
|
|
|
|
ctWanHDSLSNRDb1CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 29 }
|
|
|
|
ctWanHDSLSNRLowDb1CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 30 }
|
|
|
|
ctWanHDSLSNRHighDb1CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 31 }
|
|
|
|
ctWanHDSLPulseAttenuationDb1NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 1 of doubler 1's network side."
|
|
::= { ctWanHDSLStatisticsEntry 32 }
|
|
|
|
ctWanHDSLPulseAttenuationDb1NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 2 of doubler 1's network side."
|
|
::= { ctWanHDSLStatisticsEntry 33 }
|
|
|
|
ctWanHDSLPulseAttenuationDb1CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 1 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 34 }
|
|
|
|
ctWanHDSLPulseAttenuationDb1CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 2 of doubler 1's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 35 }
|
|
|
|
--
|
|
-- Doubler 2's Statistics
|
|
--
|
|
|
|
ctWanHDSLSNRDb2NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 36 }
|
|
|
|
ctWanHDSLSNRLowDb2NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 37 }
|
|
|
|
ctWanHDSLSNRHighDb2NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 38 }
|
|
|
|
ctWanHDSLSNRDb2NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 39 }
|
|
|
|
ctWanHDSLSNRLowDb2NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 40 }
|
|
|
|
ctWanHDSLSNRHighDb2NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 41 }
|
|
|
|
ctWanHDSLSNRDb2CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 1 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 42 }
|
|
|
|
ctWanHDSLSNRLowDb2CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 1 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 43 }
|
|
|
|
ctWanHDSLSNRHighDb2CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 1 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 44 }
|
|
|
|
ctWanHDSLSNRDb2CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current SNR on LOOP 2 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 45 }
|
|
|
|
ctWanHDSLSNRLowDb2CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lowest SNR on LOOP 2 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 46 }
|
|
|
|
ctWanHDSLSNRHighDb2CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Highest SNR on LOOP 2 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 47 }
|
|
|
|
ctWanHDSLPulseAttenuationDb2NetworkLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 1 of doubler 2's network side"
|
|
::= { ctWanHDSLStatisticsEntry 48 }
|
|
|
|
ctWanHDSLPulseAttenuationDb2NetworkLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 2 of doubler 2's network side."
|
|
::= { ctWanHDSLStatisticsEntry 49 }
|
|
|
|
ctWanHDSLPulseAttenuationDb2CustomerLoop1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pulse Attenuation on LOOP 1 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 50 }
|
|
|
|
ctWanHDSLPulseAttenuationDb2CustomerLoop2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pulse Attenuation on LOOP 2 of doubler 2's customer side."
|
|
::= { ctWanHDSLStatisticsEntry 51 }
|
|
|
|
----------------------------------------------------
|
|
-- HDSL Test Table
|
|
----------------------------------------------------
|
|
|
|
ctWanHDSLTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLTestEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Test result for the HDSL line, the current test results only
|
|
apply to the local line unit. "
|
|
::= { ctWanHDSLExt 4 }
|
|
|
|
ctWanHDSLTestEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLTestEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries of the HDSL test results table."
|
|
INDEX
|
|
{ ctWanHDSLTestHLUConnIndex }
|
|
::= { ctWanHDSLTestTable 1 }
|
|
|
|
CtWanHDSLTestEntry ::= SEQUENCE {
|
|
ctWanHDSLTestHLUConnIndex
|
|
INTEGER,
|
|
ctWanHDSLTestMode
|
|
INTEGER,
|
|
ctWanHDSLHLUTestResult
|
|
INTEGER,
|
|
ctWanHDSLHRUTestResult
|
|
INTEGER
|
|
}
|
|
|
|
ctWanHDSLTestHLUConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify the slot of the HDSL within the device that the user
|
|
wants to conduct the line unit test. Slot number start from
|
|
1 to maximum slots available in the device."
|
|
::= { ctWanHDSLTestEntry 1 }
|
|
|
|
ctWanHDSLTestMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object may only be successfully set on a master device.
|
|
When this object is set, the local unit's test mode is
|
|
defined by these values when set:
|
|
|
|
1 - Normal operation
|
|
3 - Self test mode
|
|
4 - PROM check test
|
|
5 - External RAM test
|
|
6 - DS1 loop test
|
|
7 - MUX-DMUX test
|
|
9 - Analog loopback mode
|
|
13 - Transceiver mode
|
|
|
|
When getting this object, the value returned represents
|
|
the last value this object had been set to."
|
|
|
|
::= { ctWanHDSLTestEntry 2 }
|
|
|
|
ctWanHDSLHLUTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Test result for the local line unit (1 - test failed, 0 - success):
|
|
bit 0 - 2180 DS1 frame sync test (HiGain only)
|
|
1 - 2180 DS1 data test (HiGain only)
|
|
2 - LIU DS1 frame sync test (HiGain only)
|
|
3 - LIU DS1 data test (HiGain only)
|
|
4 - External DS1 frame sync test (HiGain only)
|
|
5 - External DS1 data test.
|
|
6 - Mux sync test on HDSL LOOP 1
|
|
7 - Mux sync test on HDSL LOOP 2
|
|
8 - Reserved.
|
|
9 - Mux frame error test on HDSL LOOP 1
|
|
10 - Mux frame error test on HDSL LOOP 2
|
|
11 - Mux CRC test on HDSL LOOP 1
|
|
12 - Mux CRC test on HDSL LOOP 2
|
|
13 - Mux DL test on HDSL LOOP 1
|
|
14 - Mux DL test on HDSL LOOP 2
|
|
15 - Analog loopback test.
|
|
16 - Digital loop test.
|
|
17 - HGF HDSL loop test (HiGain only)
|
|
18 - HGF write/readback test (HiGain only)
|
|
19 - HGF poll lock test (HiGain only).
|
|
20 - HGF activity monitor test (HiGain only).
|
|
21 - HGF zeroes TX and detect test (HiGain only).
|
|
22 - HGF ones TX and detect test (HiGain only).
|
|
23 - Transceiver poll test on HDSL LOOP 1
|
|
24 - Transceiver poll test on HDSL LOOP 2
|
|
25 - PROM check test.
|
|
26 - External RAM test.
|
|
27 - Non-Volatile RAM test.
|
|
"
|
|
::= { ctWanHDSLTestEntry 3 }
|
|
|
|
ctWanHDSLHRUTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Test results for the remote line unit,
|
|
Bit definitions correspond to those defined for
|
|
ctWanHDSLHLUTestResult. "
|
|
::= { ctWanHDSLTestEntry 4 }
|
|
|
|
----------------------------------------------------
|
|
-- HDSL Alarms Table
|
|
----------------------------------------------------
|
|
|
|
ctWanHDSLAlarmsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLAlarmsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table collects the existing alarms information for the HDSL
|
|
line, including the local, remote line units and the doublers."
|
|
::= { ctWanHDSLExt 5 }
|
|
|
|
ctWanHDSLAlarmsEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLAlarmsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries for the ctWanHDSL alarms information"
|
|
INDEX
|
|
{ ctWanHDSLAlarmsHLUConnIndex }
|
|
::= { ctWanHDSLAlarmsTable 1 }
|
|
|
|
CtWanHDSLAlarmsEntry ::= SEQUENCE {
|
|
ctWanHDSLAlarmsHLUConnIndex
|
|
INTEGER,
|
|
ctWanHDSLAlarmsBackplane
|
|
INTEGER,
|
|
ctWanHDSLAlarmsES
|
|
INTEGER
|
|
}
|
|
|
|
ctWanHDSLAlarmsHLUConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify which HDSL connection within the device that
|
|
the user wants to retrieve the alarm information."
|
|
::= { ctWanHDSLAlarmsEntry 1 }
|
|
|
|
ctWanHDSLAlarmsBackplane OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specific information that's related to the HDSL alarms, each bit
|
|
in the two bytes value has the following meaning if set:
|
|
|
|
Bit 0 : Local Loss of Signal on DS1 line (HiGain only).
|
|
1 : Remote Loss of Signal on DS1 list (HiGain only).
|
|
2 - 7 : reserved.
|
|
8 : Loss of Sync word on LOOP 1 of the local line unit.
|
|
9 : Loss of Sync word on LOOP 2 of the local line unit.
|
|
10 : Loss of Sync word on LOOP 1 of the first doubler.
|
|
11 : Loss of sync word on LOOP 2 of the first doubler.
|
|
12 : Loss of Sync word on LOOP 1 of the second doubler.
|
|
13 : Loss of sync word on LOOP 2 of the second doubler."
|
|
::= { ctWanHDSLAlarmsEntry 2 }
|
|
|
|
ctWanHDSLAlarmsES OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A two bytes value for the Errored Second indication of the HDSL
|
|
line unit, including local, remote line units and the doublers.
|
|
each bit in the two bytes value has the following meaning if set:
|
|
|
|
Bit 0 : Errored Second on LOOP 1 of local line unit.
|
|
1 : Errored Second on LOOP 2 of local line unit.
|
|
2 : Errored Second on LOOP 1 of remote line unit.
|
|
3 : Errored Second on LOOP 2 of remote line unit.
|
|
4 : Errored Second on LOOP 1 of local line unit's network side.
|
|
5 : Errored Second on LOOP 2 of local line unit's network side.
|
|
6 : Errored Second on LOOP 1 of local line unit's customer side.
|
|
7 : Errored Second on LOOP 2 of local line unit's customer side."
|
|
::= { ctWanHDSLAlarmsEntry 3 }
|
|
|
|
----------------------------------------------------
|
|
-- HDSL Alarm History Table
|
|
----------------------------------------------------
|
|
|
|
ctWanHDSLAlarmHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLAlarmHistoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Alarm History table. This table provides the accumulated
|
|
counts of Errored Seconds (ES) and Loss of Sync words (LOS)
|
|
as well as the time stamp of the above events occurred for both
|
|
of the HDSL loops.
|
|
|
|
The time stamps show the date in MMDDYYYYHHMM format."
|
|
::= { ctWanHDSLExt 6 }
|
|
|
|
ctWanHDSLAlarmHistoryEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLAlarmHistoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries in the Alarm History table"
|
|
INDEX
|
|
{ ctWanHDSLAlarmHistoryConnIndex }
|
|
::= { ctWanHDSLAlarmHistoryTable 1 }
|
|
|
|
CtWanHDSLAlarmHistoryEntry ::= SEQUENCE {
|
|
ctWanHDSLAlarmHistoryConnIndex
|
|
INTEGER,
|
|
ctWanHDSLAlHistLLOSFirst
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLLOSLast
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLLOSCurrent
|
|
INTEGER,
|
|
ctWanHDSLAlHistLLOSCount
|
|
INTEGER,
|
|
ctWanHDSLAlHistRLOSFirst
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistRLOSLast
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistRLOSCurrent
|
|
INTEGER,
|
|
ctWanHDSLAlHistRLOSCount
|
|
INTEGER,
|
|
ctWanHDSLAlHistLOSW1First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLOSW1Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLOSW1Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistLOSW1Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistLOSW2First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLOSW2Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistLOSW2Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistLOSW2Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistES1First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistES1Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistES1Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistES1Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistES2First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistES2Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistES2Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistES2Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistMargin1First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistMargin1Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistMargin1Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistMargin1Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistMargin2First
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistMargin2Last
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistMargin2Current
|
|
INTEGER,
|
|
ctWanHDSLAlHistMargin2Count
|
|
INTEGER,
|
|
ctWanHDSLAlHistCleared
|
|
DisplayString(SIZE(12)),
|
|
ctWanHDSLAlHistClearit
|
|
INTEGER
|
|
}
|
|
|
|
ctWanHDSLAlarmHistoryConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines which HDSL connection's alarm history within the
|
|
device."
|
|
::= { ctWanHDSLAlarmHistoryEntry 1 }
|
|
|
|
ctWanHDSLAlHistLLOSFirst OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the DS1 Loss Of Signal (LOS)
|
|
occurred on the local side of the HDSL."
|
|
::= { ctWanHDSLAlarmHistoryEntry 2 }
|
|
|
|
ctWanHDSLAlHistLLOSLast OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the DS1 Loss Of Signal (LOS)
|
|
occurred on the local side of the HDSL."
|
|
::= { ctWanHDSLAlarmHistoryEntry 3 }
|
|
|
|
ctWanHDSLAlHistLLOSCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the DS1 Loss Of Signal (LOS) still occurred on the
|
|
local side of the HDSL."
|
|
::= { ctWanHDSLAlarmHistoryEntry 4 }
|
|
|
|
ctWanHDSLAlHistLLOSCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the DS1 Loss Of Signal (LOS) occurred since
|
|
we last cleared the alarm history on the local side of the HDSL.
|
|
(HiGain only)"
|
|
::= { ctWanHDSLAlarmHistoryEntry 5 }
|
|
|
|
ctWanHDSLAlHistRLOSFirst OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the DS1 Loss Of Signal (LOS)
|
|
occurred on the remote side of the HDSL. (HiGain only)"
|
|
::= { ctWanHDSLAlarmHistoryEntry 6 }
|
|
|
|
ctWanHDSLAlHistRLOSLast OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the DS1 Loss Of Signal (LOS) occurred
|
|
on the remote side of the HDSL. (HiGain only)"
|
|
::= { ctWanHDSLAlarmHistoryEntry 7 }
|
|
|
|
ctWanHDSLAlHistRLOSCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the DS1 Loss Of Signal (LOS) still occurred on the remote
|
|
site of the HDSL. (HiGain only)"
|
|
::= { ctWanHDSLAlarmHistoryEntry 8 }
|
|
|
|
ctWanHDSLAlHistRLOSCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the DS1 Loss Of Signal (LOS) occurred since we
|
|
last cleared the alarm history on the remote site of the HDSL.
|
|
(HiGain only)"
|
|
::= { ctWanHDSLAlarmHistoryEntry 9 }
|
|
|
|
ctWanHDSLAlHistLOSW1First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the Loss Of Sync Word (LOSW) occurred
|
|
on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 10 }
|
|
|
|
ctWanHDSLAlHistLOSW1Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the Loss Of Sync Word (LOSW) occurred
|
|
on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 11 }
|
|
|
|
ctWanHDSLAlHistLOSW1Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 1
|
|
of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 12 }
|
|
|
|
ctWanHDSLAlHistLOSW1Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the Loss Of Sync Word (LOSW) occurred since we
|
|
last cleared the history on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 13 }
|
|
|
|
ctWanHDSLAlHistLOSW2First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the Loss Of Sync Word (LOSW) occurred
|
|
on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 14 }
|
|
|
|
ctWanHDSLAlHistLOSW2Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the Loss Of Sync Word (LOSW) occurred
|
|
on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 15 }
|
|
|
|
ctWanHDSLAlHistLOSW2Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 2
|
|
of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 16 }
|
|
|
|
ctWanHDSLAlHistLOSW2Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the Loss Of Sync Word (LOSW) occurred since we
|
|
last cleared the history on the LOOP 2 of the HDSL link. "
|
|
::= { ctWanHDSLAlarmHistoryEntry 17 }
|
|
|
|
ctWanHDSLAlHistES1First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the Errored Seconds (ES) occurred
|
|
on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 18 }
|
|
|
|
ctWanHDSLAlHistES1Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the Errored Seconds (ES) occurred
|
|
on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 19 }
|
|
|
|
ctWanHDSLAlHistES1Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the Errored Seconds (ES) still occurred on the LOOP 1 of
|
|
the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 20 }
|
|
|
|
ctWanHDSLAlHistES1Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the Errored Seconds (ES) occurred since we last
|
|
cleared the alarm history on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 21 }
|
|
|
|
ctWanHDSLAlHistES2First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the Errored Seconds (ES) occurred
|
|
on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 22 }
|
|
|
|
ctWanHDSLAlHistES2Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the Errored Seconds (ES) occurred
|
|
on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 23 }
|
|
|
|
ctWanHDSLAlHistES2Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the Errored Seconds (ES) still occurred on the LOOP 2 of
|
|
the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 24 }
|
|
|
|
ctWanHDSLAlHistES2Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the Errored Seconds (ES) occurred since we last
|
|
cleared the history on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 25 }
|
|
|
|
ctWanHDSLAlHistMargin1First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the alarms exceeded the
|
|
Margin Threshold on LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 26 }
|
|
|
|
ctWanHDSLAlHistMargin1Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the alarms exceeded the Margin
|
|
Threshold on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 27 }
|
|
|
|
ctWanHDSLAlHistMargin1Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the alarms still exceeded the Margin Threshold
|
|
on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 28 }
|
|
|
|
ctWanHDSLAlHistMargin1Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the alarm exceeded the Margin Threshold since
|
|
we last cleared the alarm history on the LOOP 1 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 29 }
|
|
|
|
ctWanHDSLAlHistMargin2First OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the first time the alarms exceeded the Margin
|
|
Threshold on LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 30 }
|
|
|
|
ctWanHDSLAlHistMargin2Last OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the last time the alarms exceeded the Margin
|
|
Threshold on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 31 }
|
|
|
|
ctWanHDSLAlHistMargin2Current OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set if the alarms still exceeded the Margin Threshold
|
|
on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 32 }
|
|
|
|
ctWanHDSLAlHistMargin2Count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of times the alarm exceeded the Margin Threshold since
|
|
we last cleared the alarm history on the LOOP 2 of the HDSL link."
|
|
::= { ctWanHDSLAlarmHistoryEntry 33 }
|
|
|
|
ctWanHDSLAlHistCleared OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time stamp of the time user requested to clear the alarm history."
|
|
::= { ctWanHDSLAlarmHistoryEntry 34 }
|
|
|
|
ctWanHDSLAlHistClearit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"set to a 1 to clear the alarm history.
|
|
A read of this value always returns a 1.
|
|
|
|
NOTE: the setting of this object also causes the SNR low
|
|
value, SNR high value, and the performance history to be
|
|
reset."
|
|
|
|
::= { ctWanHDSLAlarmHistoryEntry 35 }
|
|
|
|
----------------------------------------------------
|
|
-- HDSL Loopbacks Table
|
|
----------------------------------------------------
|
|
|
|
ctWanHDSLLoopbacksTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtWanHDSLLoopbacksEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Loopback table. This table provides the certain loopback
|
|
settings for the HDSL link."
|
|
::= { ctWanHDSLExt 7 }
|
|
|
|
ctWanHDSLLoopbacksEntry OBJECT-TYPE
|
|
SYNTAX CtWanHDSLLoopbacksEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entries in the HDSL Loopback table."
|
|
INDEX
|
|
{ ctWanHDSLLoopbacksHLUConnIndex }
|
|
::= { ctWanHDSLLoopbacksTable 1 }
|
|
|
|
CtWanHDSLLoopbacksEntry ::= SEQUENCE {
|
|
ctWanHDSLLoopbacksHLUConnIndex
|
|
INTEGER,
|
|
ctWanHDSLLoopbacksAdminType
|
|
INTEGER,
|
|
ctWanHDSLLoopbacksOperType
|
|
INTEGER
|
|
}
|
|
|
|
ctWanHDSLLoopbacksHLUConnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identify the HDSL connection within the device"
|
|
::= { ctWanHDSLLoopbacksEntry 1 }
|
|
|
|
ctWanHDSLLoopbacksAdminType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the requested loopback type for the HDSL.
|
|
|
|
loopbacks setting:
|
|
1 : Smartjack - loopback to network at remote line unit.
|
|
2 : Loopback to network at local line unit.
|
|
3 : Loopback to network at remote line unit.
|
|
4 : Loopback to customer at local line unit.
|
|
5 : Loopback to customer at remote line unit.
|
|
6 : Loopback to customer at first doubler.
|
|
7 : Loopback to customer at second doubler.
|
|
8 : Loopback to network at first doubler.
|
|
9 : Loopback to network at second doubler.
|
|
10: No loopback (turn loopback off). "
|
|
::= { ctWanHDSLLoopbacksEntry 2 }
|
|
|
|
ctWanHDSLLoopbacksOperType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the operational loopback type for the HDSL.
|
|
|
|
loopbacks setting:
|
|
1 : Smartjack - loopback to network at remote line unit.
|
|
2 : Loopback to network at local line unit.
|
|
3 : Loopback to network at remote line unit.
|
|
4 : Loopback to customer at local line unit.
|
|
5 : Loopback to customer at remote line unit.
|
|
6 : Loopback to customer at first doubler.
|
|
7 : Loopback to customer at second doubler.
|
|
8 : Loopback to network at first doubler.
|
|
9 : Loopback to network at second doubler.
|
|
10: No loopback (turn loopback off). "
|
|
::= { ctWanHDSLLoopbacksEntry 3 }
|
|
|
|
END
|