mibs/MIBS/ibm/IBMHPRNCL-MIB
2023-12-05 12:25:34 +01:00

679 lines
20 KiB
Plaintext

IBMHPRNCL-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, TimeTicks, Gauge
FROM RFC1155-SMI
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
-- IMPORTS
-- MODULE-IDENTITY, Unsigned32, Counter32, TimeTicks, OBJECT-TYPE,
-- enterprises
-- FROM SNMPv2-SMI
-- OBJECT-GROUP, MODULE-COMPLIANCE
-- FROM SNMPv2-CONF
-- DisplayString
-- FROM SNMPv2-TC;
-- ibmHprNcl MODULE-IDENTITY
-- LAST-UPDATED "9611080000Z"
-- ORGANIZATION "IBM"
-- CONTACT-INFO "Bob Moore (remoore @ ralvm6)
-- IBM Corporation
-- 800 Park Offices Drive
-- RHJA/664
-- P.O. Box 12195
-- Research Triangle Park, NC 27709, USA
-- Tel: 1 919 254 4436
-- E-mail: remoore@ralvm6.vnet.ibm.com"
-- DESCRIPTION
-- "This MIB module represents the HPR NCL group from the original
-- IBM version of the HPR MIB, updated to SNMPv2 SMI. It is set
-- up to use as its anchor point the same OID that identified the
-- group in the IBM-HPR-MIB, so that existing manager applications
-- will not need to change."
-- ::= { hpr 3 }
-- The following OID assignments result in the same OIDs for the
-- objects in the port DLC trace group as those in the IBM-6611-APPN-MIB.
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
hpr OBJECT IDENTIFIER ::= { ibmArchitecture 10 }
ibmHprNcl OBJECT IDENTIFIER ::= {hpr 3}
-- **********************************************************************
ibmHprNclGlobe OBJECT IDENTIFIER ::= { ibmHprNcl 1 }
-- **********************************************************************
ibmHprNclGlobeCtrState OBJECT-TYPE
SYNTAX INTEGER {
notActive(1),
active(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used for a network management station to turn
on/off the optional counters in the ibmHprNclTable.
notActive(1) - these counters are not being incremented;
their values are always zero
active(2) - these counters are being incremented"
::= { ibmHprNclGlobe 1 }
ibmHprNclGlobeCtrStateTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timestamp (i.e., the Agent's appnNodeUpTime value) when
the ibmHprNclGlobeCtrState object was last changed. This time
is in hundredths of a second."
::= { ibmHprNclGlobe 2 }
ibmHprNclGlobeAssignAnrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ANR's assigned by this node since it was
last re-initialized."
::= { ibmHprNclGlobe 3 }
-- **********************************************************************
-- The HPR NCL Table
-- This table contains the counters for ANR routing
-- **********************************************************************
ibmHprNclTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmHprNclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The HPR NCL table"
::= { ibmHprNcl 2 }
ibmHprNclEntry OBJECT-TYPE
SYNTAX IbmHprNclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The EnvId is used as the index to this table."
INDEX { ibmHprNclEnvId }
::= { ibmHprNclTable 1}
IbmHprNclEntry ::= SEQUENCE {
ibmHprNclEnvId Gauge, -- environ id (slot)
-- receive frame/byte counters from DLC by priority
ibmHprNclDlcRecvNetFrames Counter, -- dcl recv network frames
ibmHprNclDlcRecvHiFrames Counter, -- dcl recv high frames
ibmHprNclDlcRecvMedFrames Counter, -- dcl recv medium frames
ibmHprNclDlcRecvLoFrames Counter, -- dcl recv low frames
ibmHprNclDlcRecvNetBytes Counter, -- dcl recv network bytes
ibmHprNclDlcRecvHiBytes Counter, -- dcl recv high bytes
ibmHprNclDlcRecvMedBytes Counter, -- dcl recv medium bytes
ibmHprNclDlcRecvLoBytes Counter, -- dcl recv low bytes
ibmHprNclDlcRecvAnrErrors Counter, -- dcl recv ANR errors
-- send frame/byte counters to DLC by priority
ibmHprNclDlcSendNetFrames Counter, -- dcl send network frames
ibmHprNclDlcSendHiFrames Counter, -- dcl send high frames
ibmHprNclDlcSendMedFrames Counter, -- dcl send medium frames
ibmHprNclDlcSendLoFrames Counter, -- dcl send low frames
ibmHprNclDlcSendNetBytes Counter, -- dcl send network bytes
ibmHprNclDlcSendHiBytes Counter, -- dcl send high bytes
ibmHprNclDlcSendMedBytes Counter, -- dcl send medium bytes
ibmHprNclDlcSendLoBytes Counter, -- dcl send low bytes
-- receive frame/byte counters from RTP by priority
ibmHprNclRtpRecvNetFrames Counter, -- RTP recv network frames
ibmHprNclRtpRecvHiFrames Counter, -- RTP recv high frames
ibmHprNclRtpRecvMedFrames Counter, -- RTP recv medium frames
ibmHprNclRtpRecvLoFrames Counter, -- RTP recv low frames
ibmHprNclRtpRecvNetBytes Counter, -- RTP recv network bytes
ibmHprNclRtpRecvHiBytes Counter, -- RTP recv high bytes
ibmHprNclRtpRecvMedBytes Counter, -- RTP recv medium bytes
ibmHprNclRtpRecvLoBytes Counter, -- RTP recv low bytes
ibmHprNclRtpRecvAnrErrors Counter, -- RTP recv ANR errors
-- send frame/byte counters to RTP by priority
ibmHprNclRtpSendNetFrames Counter, -- dcl send network frames
ibmHprNclRtpSendHiFrames Counter, -- dcl send high frames
ibmHprNclRtpSendMedFrames Counter, -- dcl send medium frames
ibmHprNclRtpSendLoFrames Counter, -- dcl send low frames
ibmHprNclRtpSendNetBytes Counter, -- dcl send network bytes
ibmHprNclRtpSendHiBytes Counter, -- dcl send high bytes
ibmHprNclRtpSendMedBytes Counter, -- dcl send medium bytes
ibmHprNclRtpSendLoBytes Counter, -- dcl send low bytes
-- send frame/byte counters to another local routing ncl
ibmHprNclInterSendNetFrames Counter, -- int send network frames
ibmHprNclInterSendHiFrames Counter, -- int send high frames
ibmHprNclInterSendMedFrames Counter, -- int send medium frames
ibmHprNclInterSendLoFrames Counter, -- int send low frames
ibmHprNclInterSendNetBytes Counter, -- int send network bytes
ibmHprNclInterSendHiBytes Counter, -- int send high bytes
ibmHprNclInterSendMedBytes Counter, -- int send medium bytes
ibmHprNclInterSendLoBytes Counter -- int send low bytes
}
ibmHprNclEnvId OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product's internal environment id for this NCL, e.g.,
adapter number, address space number."
::= { ibmHprNclEntry 1 }
ibmHprNclDlcRecvNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority frames received from the
data control layer (DLC)."
::= { ibmHprNclEntry 2 }
ibmHprNclDlcRecvHiFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority frames received from the
data control layer (DLC)."
::= { ibmHprNclEntry 3 }
ibmHprNclDlcRecvMedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority frames received from the
data control layer (DLC)."
::= { ibmHprNclEntry 4 }
ibmHprNclDlcRecvLoFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority frames received from the data
control layer (DLC)."
::= { ibmHprNclEntry 5 }
ibmHprNclDlcRecvNetBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority bytes received from the
data control layer (DLC)."
::= { ibmHprNclEntry 6 }
ibmHprNclDlcRecvHiBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority bytes received from the data
control layer (DLC)."
::= { ibmHprNclEntry 7 }
ibmHprNclDlcRecvMedBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority bytes received from the
data control layer (DLC)."
::= { ibmHprNclEntry 8 }
ibmHprNclDlcRecvLoBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority bytes received from the data
control layer (DLC)."
::= { ibmHprNclEntry 9 }
ibmHprNclDlcRecvAnrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames containing ANR errors which were
received from the data control layer (DLC)."
::= { ibmHprNclEntry 10 }
ibmHprNclDlcSendNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority sent to the data control
layer (DLC)."
::= { ibmHprNclEntry 11 }
ibmHprNclDlcSendHiFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority frames sent to the data
control layer (DLC)."
::= { ibmHprNclEntry 12 }
ibmHprNclDlcSendMedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority frames sent to the data
control layer (DLC)."
::= { ibmHprNclEntry 13 }
ibmHprNclDlcSendLoFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority frames sent to
the data control layer (DLC)."
::= { ibmHprNclEntry 14 }
ibmHprNclDlcSendNetBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority bytes sent to the data
control layer (DLC)."
::= { ibmHprNclEntry 15 }
ibmHprNclDlcSendHiBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority bytes sent to
the data control layer (DLC)."
::= { ibmHprNclEntry 16 }
ibmHprNclDlcSendMedBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority bytes sent to the data
control layer (DLC)."
::= { ibmHprNclEntry 17 }
ibmHprNclDlcSendLoBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority bytes sent to the data
control layer (DLC)."
::= { ibmHprNclEntry 18 }
ibmHprNclRtpRecvNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority frames received from a
local RTP connection."
::= { ibmHprNclEntry 19 }
ibmHprNclRtpRecvHiFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority frames received from a local
RTP connection."
::= { ibmHprNclEntry 20 }
ibmHprNclRtpRecvMedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority frames received from a
local RTP connection."
::= { ibmHprNclEntry 21 }
ibmHprNclRtpRecvLoFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority frames received from a local
RTP connection."
::= { ibmHprNclEntry 22 }
ibmHprNclRtpRecvNetBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority bytes received from a
local RTP connection."
::= { ibmHprNclEntry 23 }
ibmHprNclRtpRecvHiBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority bytes received from a local
RTP connection."
::= { ibmHprNclEntry 24 }
ibmHprNclRtpRecvMedBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority bytes received from a
local RTP connection."
::= { ibmHprNclEntry 25 }
ibmHprNclRtpRecvLoBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority bytes received from a local
RTP connection."
::= { ibmHprNclEntry 26 }
ibmHprNclRtpRecvAnrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames containing ANR errors which were
received from a local RTP connection."
::= { ibmHprNclEntry 27 }
ibmHprNclRtpSendNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority sent to a local RTP
connection."
::= { ibmHprNclEntry 28 }
ibmHprNclRtpSendHiFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority frames sent to a local RTP
connection."
::= { ibmHprNclEntry 29 }
ibmHprNclRtpSendMedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority frames sent to a local RTP
connection."
::= { ibmHprNclEntry 30 }
ibmHprNclRtpSendLoFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority frames sent to a local RTP
connection."
::= { ibmHprNclEntry 31 }
ibmHprNclRtpSendNetBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority bytes sent to a local RTP
connection."
::= { ibmHprNclEntry 32 }
ibmHprNclRtpSendHiBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority bytes sent to a local RTP
connection."
::= { ibmHprNclEntry 33 }
ibmHprNclRtpSendMedBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority bytes sent to a local RTP
connection."
::= { ibmHprNclEntry 34 }
ibmHprNclRtpSendLoBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority bytes sent to a local RTP
connection."
::= { ibmHprNclEntry 35 }
ibmHprNclInterSendNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority sent to another local
routing NCL."
::= { ibmHprNclEntry 36 }
ibmHprNclInterSendHiFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority frames sent to another local
routing NCL."
::= { ibmHprNclEntry 37 }
ibmHprNclInterSendMedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority frames sent to another
local routing NCL."
::= { ibmHprNclEntry 38 }
ibmHprNclInterSendLoFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority frames sent to another local
routing NCL."
::= { ibmHprNclEntry 39 }
ibmHprNclInterSendNetBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of network priority bytes sent to another
local routing NCL."
::= { ibmHprNclEntry 40 }
ibmHprNclInterSendHiBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of high priority bytes sent to another local
routing NCL."
::= { ibmHprNclEntry 41 }
ibmHprNclInterSendMedBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of medium priority bytes sent to another
local routing NCL."
::= { ibmHprNclEntry 42 }
ibmHprNclInterSendLoBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of low priority bytes sent to another local
routing NCL."
::= { ibmHprNclEntry 43 }
-- ******************************************************************
-- IBM HPR NCL conformance
-- ******************************************************************
ibmHprNclCompliances OBJECT IDENTIFIER ::= { ibmHprNcl 3 }
ibmHprNclConfGroups OBJECT IDENTIFIER ::= { ibmHprNcl 4 }
-- ibmHprNclCompliance MODULE-COMPLIANCE
-- STATUS mandatory
-- DESCRIPTION
-- "The compliance statement for the SNMPv2 entities that
-- implement the IBM HPR NCL function."
-- MODULE
-- MANDATORY-GROUPS
-- { ibmHprNclObjectsConfGroup }
-- ::= { ibmHprNclCompliances 1 }
-- ibmHprNclObjectsConfGroup OBJECT-GROUP
-- OBJECTS {
-- ibmHprNclGlobeCtrState,
-- ibmHprNclGlobeCtrStateTime,
-- ibmHprNclGlobeAssignAnrs,
-- ibmHprNclDlcRecvNetFrames,
-- ibmHprNclDlcRecvHiFrames,
-- ibmHprNclDlcRecvMedFrames,
-- ibmHprNclDlcRecvLoFrames,
-- ibmHprNclDlcRecvNetBytes,
-- ibmHprNclDlcRecvHiBytes,
-- ibmHprNclDlcRecvMedBytes,
-- ibmHprNclDlcRecvLoBytes,
-- ibmHprNclDlcRecvAnrErrors,
-- ibmHprNclDlcSendNetFrames,
-- ibmHprNclDlcSendHiFrames,
-- ibmHprNclDlcSendMedFrames,
-- ibmHprNclDlcSendLoFrames,
-- ibmHprNclDlcSendNetBytes,
-- ibmHprNclDlcSendHiBytes,
-- ibmHprNclDlcSendMedBytes,
-- ibmHprNclDlcSendLoBytes,
-- ibmHprNclRtpRecvNetFrames,
-- ibmHprNclRtpRecvHiFrames,
-- ibmHprNclRtpRecvMedFrames,
-- ibmHprNclRtpRecvLoFrames,
-- ibmHprNclRtpRecvNetBytes,
-- ibmHprNclRtpRecvHiBytes,
-- ibmHprNclRtpRecvMedBytes,
-- ibmHprNclRtpRecvLoBytes,
-- ibmHprNclRtpRecvAnrErrors,
-- ibmHprNclRtpSendNetFrames,
-- ibmHprNclRtpSendHiFrames,
-- ibmHprNclRtpSendMedFrames,
-- ibmHprNclRtpSendLoFrames,
-- ibmHprNclRtpSendNetBytes,
-- ibmHprNclRtpSendHiBytes,
-- ibmHprNclRtpSendMedBytes,
-- ibmHprNclRtpSendLoBytes,
-- ibmHprNclInterSendNetFrames,
-- ibmHprNclInterSendHiFrames,
-- ibmHprNclInterSendMedFrames,
-- ibmHprNclInterSendLoFrames,
-- ibmHprNclInterSendNetBytes,
-- ibmHprNclInterSendHiBytes,
-- ibmHprNclInterSendMedBytes,
-- ibmHprNclInterSendLoBytes
-- }
-- STATUS mandatory
-- DESCRIPTION
-- "All of the accessible objects in this module."
-- ::= { ibmHprNclConfGroups 1 }
END