602 lines
23 KiB
Plaintext
602 lines
23 KiB
Plaintext
-- *****************************************************************
|
|
-- TN-Y1564-MIB.my : TN Y.1564 OAM MIB
|
|
--
|
|
-- Author : Krish
|
|
--
|
|
-- Copyright (c) 2014 by Transition Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *************************************************************************************************
|
|
--
|
|
|
|
TN-Y1564-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue FROM SNMPv2-TC
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
tnProducts FROM TRANSITION-SMI
|
|
InetAddressType,InetAddress FROM INET-ADDRESS-MIB
|
|
MacAddress FROM SNMPv2-TC
|
|
;
|
|
|
|
tnY1564MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201408220000Z"
|
|
ORGANIZATION "Transition Networks, Inc."
|
|
CONTACT-INFO
|
|
" Transition Networks
|
|
Technical Support
|
|
10900 Red Circle Drive
|
|
Minnetonka, MN 55343 USA
|
|
Tel: +1-800-526-9267
|
|
|
|
E-mail: techsupport@transition.com"
|
|
DESCRIPTION
|
|
"The MIB provides functionalities for system user management in TN modules."
|
|
REVISION "201408220000Z"
|
|
DESCRIPTION
|
|
"Initial Revision of this module"
|
|
::= { tnProducts 154 }
|
|
|
|
|
|
tnY1564MIBNotifications OBJECT IDENTIFIER ::= { tnY1564MIB 1 }
|
|
tnY1564MIBObjects OBJECT IDENTIFIER ::= { tnY1564MIB 2 }
|
|
tnY1564MIBConformance OBJECT IDENTIFIER ::= { tnY1564MIB 3 }
|
|
|
|
|
|
--
|
|
-- sub Objects list
|
|
--
|
|
tnY1564CfgMgmt OBJECT IDENTIFIER ::= { tnY1564MIBObjects 1 }
|
|
tnY1564ReportMgmt OBJECT IDENTIFIER ::= { tnY1564MIBObjects 2 }
|
|
|
|
tnY1564ProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnY1564ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides configuration of SOAM Maintenance Point.
|
|
"
|
|
::= { tnY1564CfgMgmt 1 }
|
|
|
|
tnY1564ProfileEntry OBJECT-TYPE
|
|
SYNTAX TnY1564ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A entry in the table represents a configuration for local SOAM."
|
|
INDEX { IMPLIED tnY1564ProfileName }
|
|
::= { tnY1564ProfileTable 1 }
|
|
|
|
TnY1564ProfileEntry ::=
|
|
SEQUENCE{
|
|
tnY1564ProfileName SnmpAdminString,
|
|
tnY1564ProfileDescription DisplayString,
|
|
tnY1564DuelEnded TruthValue,
|
|
tnY1564DstOamAware TruthValue,
|
|
tnY1564TrafficType INTEGER,
|
|
tnY1564MegLevel INTEGER,
|
|
tnY1564FrameSize INTEGER,
|
|
tnY1564UserFrameSize INTEGER,
|
|
tnY1564DwellTime INTEGER,
|
|
tnY1564SacFLR INTEGER,
|
|
tnY1564SacFTD INTEGER,
|
|
tnY1564SacFDV INTEGER,
|
|
tnY1564CirEnable TruthValue,
|
|
tnY1564CirStepDuration INTEGER,
|
|
tnY1564CirDmInterval INTEGER,
|
|
tnY1564CirStepCount INTEGER,
|
|
tnY1564EirEnable TruthValue,
|
|
tnY1564EirDuration INTEGER,
|
|
tnY1564EirDmInterval INTEGER,
|
|
tnY1564TrafficPolicingEnable TruthValue,
|
|
tnY1564TrafficPolicingDuration INTEGER,
|
|
tnY1564TrafficPolicingDmInterval INTEGER,
|
|
tnY1564PerfTestEnable TruthValue,
|
|
tnY1564PerfTestDuration INTEGER,
|
|
tnY1564PerfTestUserDuration INTEGER,
|
|
tnY1564PerfTestDmInterval INTEGER,
|
|
tnY1564ProfileStatus RowStatus
|
|
}
|
|
|
|
tnY1564ProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name, ASCII range 33-126, of this table."
|
|
::= { tnY1564ProfileEntry 1 }
|
|
|
|
tnY1564ProfileDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of this table."
|
|
::= { tnY1564ProfileEntry 2 }
|
|
|
|
tnY1564DuelEnded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For future use."
|
|
::= { tnY1564ProfileEntry 3 }
|
|
|
|
tnY1564DstOamAware OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set, switch transmits Y.1731 DMM frames for delay measurements
|
|
and Y.1731 1DM frames when this is cleared. When Traffic Type is 'Y.1731 OAM',
|
|
switch transmits Y.1731 LBM frames as background traffic when DST is
|
|
configured as OAM-aware, and Y.1731 TST frames when not."
|
|
::= { tnY1564ProfileEntry 4 }
|
|
|
|
tnY1564TrafficType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
y1731Oam(1),
|
|
simCustomer(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "
|
|
When set to 'Y.1731 OAM', this switch transmits Y.1731
|
|
OAM PDUs as background traffic, and DST is OAM-aware
|
|
determines the PDU type. In the current version of the
|
|
software, only one ECE can be tested at a time in this mode.
|
|
When set to 'Simulated Customer', the software will generate
|
|
a traffic-pattern per ECE that will hit the ECE, and use
|
|
the ECE's counters to determine PASS/FAIL criteria.Besides
|
|
supporting simultaneous test of multiple ECEs,
|
|
'Simulated Customer' has the advantage that the tester can
|
|
see directly from the report if she has configured ECEs wrongly,
|
|
since the report will show per-ECE counters and fail if an ECE
|
|
under test is not hit as expected by the traffic pattern."
|
|
::= { tnY1564ProfileEntry 5 }
|
|
|
|
tnY1564MegLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The MEG level used in generated Y.1731 OAM frames (both LBM/TST and DMM/1DM)."
|
|
::= { tnY1564ProfileEntry 6 }
|
|
|
|
tnY1564FrameSize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bytes64(1),
|
|
bytes128(2),
|
|
bytes256(3),
|
|
bytes512(4),
|
|
bytes1024(5),
|
|
bytes1280(6),
|
|
bytes1518(7),
|
|
mtu(8),
|
|
userDefined(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Selects the frame size of the background traffic. The frame size
|
|
does not include possible C-tag(s) added to match the ECE. Besides
|
|
standard frame sizes there are two custom selections:
|
|
|
|
MTU - The UNI's MTU will be used for the background traffic.
|
|
User-defined - custom specification of a frame size of the background traffic.
|
|
Valid range is 64 to 10236 bytes.
|
|
"
|
|
::= { tnY1564ProfileEntry 7 }
|
|
|
|
tnY1564UserFrameSize OBJECT-TYPE
|
|
SYNTAX INTEGER(64..10236)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
User defined frame size of the background traffic.
|
|
Valid range is 64 to 10236 bytes.
|
|
"
|
|
::= { tnY1564ProfileEntry 8 }
|
|
|
|
tnY1564DwellTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When a trial (a single step of a subtest) is executed, background
|
|
traffic is transmitted for a certain period of time. When that
|
|
period has elapsed, the Dwell Time determines how long to wait
|
|
before reading hardware counters and status in order to assess
|
|
the status of the trial. The required dwell time must be at least
|
|
the worst-case roundtrip time, and therefore a.o. depends on the
|
|
physical distance between the near and far ends.
|
|
|
|
Valid range is from 100 to 10000 in steps of 100 milliseconds
|
|
with a default of 500 milliseconds.
|
|
"
|
|
::= { tnY1564ProfileEntry 9 }
|
|
|
|
tnY1564SacFLR OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Defines the acceptable Frame Loss Ratio.
|
|
The Acceptable FLR is measured in permille. Setting this to
|
|
1000 effectively disables this check.The number is used in all
|
|
enabled subtests. Only delay measurement PDUs and green
|
|
background traffic undergoes FLR check. If the number of looped
|
|
green frames differs from the number of transmitted green frames
|
|
by more than the 'Acceptable FLR', the test is considered failing,
|
|
otherwise passing.If the EVC contains multiple ECEs that matches
|
|
on the same VLAN ID (UNI ingress) and the EVC uses 'Tx Lookup' equal
|
|
to 'VID-PCP', the NNI ingress rules count looped traffic per NNI
|
|
outer tag's PCP, and therefore provide more detailed information about
|
|
which ECE is failing, than if the EVC uses 'Tx Lookup' equal to 'VID',
|
|
where all looped traffic arriving on NNI is counted on the same ECE.
|
|
The disadvantage of the 'VID-PCP' method is that it uses more chip
|
|
resources than does the 'VID' method.
|
|
|
|
Valid range is from 0 to 1000 with a default of 0‰.
|
|
"
|
|
::= { tnY1564ProfileEntry 10 }
|
|
|
|
tnY1564SacFTD OBJECT-TYPE
|
|
SYNTAX INTEGER(0..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Defines the acceptable Frame Transfer Delay, measured in
|
|
milliseconds. If the highest observed frame transfer delay
|
|
exceeds this, the test fails.
|
|
|
|
Valid range is from 0 to 10000 with a default of 0 milliseconds.
|
|
A value of 0 disables this check.
|
|
"
|
|
::= { tnY1564ProfileEntry 11 }
|
|
|
|
tnY1564SacFDV OBJECT-TYPE
|
|
SYNTAX INTEGER(0..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Defines the acceptable Frame Delay Variation, measured in milliseconds.
|
|
If the highest observed frame delay variation exceeds this, the test fails.
|
|
Valid range is from 0 to 10000 with a default of 0 milliseconds.
|
|
A value of 0 disables this check.
|
|
"
|
|
::= { tnY1564ProfileEntry 12 }
|
|
|
|
tnY1564CirEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set, to enable the CIR test."
|
|
::= { tnY1564ProfileEntry 13 }
|
|
|
|
tnY1564CirStepDuration OBJECT-TYPE
|
|
SYNTAX INTEGER(1..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Each step in the CIR configuration test applies background
|
|
traffic for this number of seconds.
|
|
Valid range is from 1 to 3600 with a default of 10 seconds.
|
|
"
|
|
::= { tnY1564ProfileEntry 14 }
|
|
|
|
tnY1564CirDmInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Y.1731 1DM or DMM frame (depending on type of test) is
|
|
transmitted every so many milliseconds, in order to perform
|
|
delay measurements (DM). The number should be selected so
|
|
that at least three DM frames are transmitted during a trial
|
|
in order to obtain delay variation results. After each trial
|
|
the measured FTD and FDV is compared against the SAC's Acceptable FLR, FTD, and FDV.
|
|
|
|
Valid range is from 100 to 10000 in steps of 100 milliseconds
|
|
with a default of 500 milliseconds.
|
|
A value of 0 effectively disables transmission of DM frames,
|
|
which thereby indirectly disables the check against the SAC.
|
|
"
|
|
::= { tnY1564ProfileEntry 15 }
|
|
|
|
tnY1564CirStepCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of steps (trials) used to reach CIR. If, for example,
|
|
Step Count is set to 4, four trials are executed. The first runs
|
|
at 25% of this ECEs share of CIR, the second at 50%, then 75%,
|
|
and finally 100%. A step count of 1 corresponds to executing
|
|
Y.1564's A.1 test (Simple CIR Validation Test). A step count
|
|
greater than 1 corresponds to executing Y.1564's A.2 test (Step Load CIR Test).
|
|
|
|
Valid range is from 1 to 1000 with a default of 4 steps.
|
|
"
|
|
::= { tnY1564ProfileEntry 16 }
|
|
|
|
tnY1564EirEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set, to enable the EIR test."
|
|
::= { tnY1564ProfileEntry 17 }
|
|
|
|
tnY1564EirDuration OBJECT-TYPE
|
|
SYNTAX INTEGER(1..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The EIR configuration test is executed in one single trial,
|
|
whose duration is configured with this parameter.
|
|
Valid range is from 1 to 3600 with a default of 10 seconds.
|
|
"
|
|
::= { tnY1564ProfileEntry 18 }
|
|
|
|
tnY1564EirDmInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Y.1731 1DM or DMM frame (depending on type of test) is
|
|
transmitted every so many milliseconds, in order to perform
|
|
delay measurements (DM). The number should be selected so
|
|
that at least three DM frames are transmitted during a trial
|
|
in order to obtain delay variation results. After each trial
|
|
the measured FTD and FDV is compared against the SAC's Acceptable FLR, FTD, and FDV.
|
|
|
|
Valid range is from 100 to 10000 in steps of 100 milliseconds
|
|
with a default of 500 milliseconds.
|
|
A value of 0 effectively disables transmission of DM frames,
|
|
which thereby indirectly disables the check against the SAC.
|
|
"
|
|
::= { tnY1564ProfileEntry 19 }
|
|
|
|
tnY1564TrafficPolicingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set, to enable the Traffic Policing test."
|
|
::= { tnY1564ProfileEntry 20 }
|
|
|
|
tnY1564TrafficPolicingDuration OBJECT-TYPE
|
|
SYNTAX INTEGER(1..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Traffic Policing test is executed in one single trial,
|
|
whose duration is configured with this parameter.
|
|
Valid range is from 1 to 3600 with a default of 10 seconds.
|
|
"
|
|
::= { tnY1564ProfileEntry 21 }
|
|
|
|
tnY1564TrafficPolicingDmInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Y.1731 1DM or DMM frame (depending on type of test) is
|
|
transmitted every so many milliseconds, in order to perform
|
|
delay measurements (DM). The number should be selected so
|
|
that at least three DM frames are transmitted during a trial
|
|
in order to obtain delay variation results. After each trial
|
|
the measured FTD and FDV is compared against the SAC's Acceptable FLR, FTD, and FDV.
|
|
|
|
Valid range is from 100 to 10000 in steps of 100 milliseconds
|
|
with a default of 500 milliseconds.
|
|
A value of 0 effectively disables transmission of DM frames,
|
|
which thereby indirectly disables the check against the SAC.
|
|
"
|
|
::= { tnY1564ProfileEntry 22 }
|
|
|
|
tnY1564PerfTestEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set, to enable the Performance test."
|
|
::= { tnY1564ProfileEntry 23 }
|
|
|
|
tnY1564PerfTestDuration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mins15(1),
|
|
hours2(2),
|
|
hours24(3),
|
|
userDefined(4)
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The performance test is executed in one single trial, whose
|
|
duration is configured with this parameter. There are
|
|
Y.1564-specified standard durations and a custom duration can be
|
|
specified by selecting User-defined Duration option.
|
|
"
|
|
::= { tnY1564ProfileEntry 24 }
|
|
|
|
tnY1564PerfTestUserDuration OBJECT-TYPE
|
|
SYNTAX INTEGER(1..86400)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
User defined duration. Valid range is from 1 to 86400 with a default of 900 seconds
|
|
"
|
|
::= { tnY1564ProfileEntry 25 }
|
|
|
|
tnY1564PerfTestDmInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Y.1731 1DM or DMM frame (depending on type of test) is
|
|
transmitted every so many milliseconds, in order to perform
|
|
delay measurements (DM). The number should be selected so
|
|
that at least three DM frames are transmitted during a trial
|
|
in order to obtain delay variation results. After each trial
|
|
the measured FTD and FDV is compared against the SAC's Acceptable FLR, FTD, and FDV.
|
|
|
|
Valid range is from 100 to 10000 in steps of 100 milliseconds
|
|
with a default of 500 milliseconds.
|
|
A value of 0 effectively disables transmission of DM frames,
|
|
which thereby indirectly disables the check against the SAC.
|
|
"
|
|
::= { tnY1564ProfileEntry 26 }
|
|
|
|
tnY1564ProfileStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { tnY1564ProfileEntry 27 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
|
|
tnY1564ReportTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnY1564ReportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides configuration of SOAM Maintenance Point.
|
|
"
|
|
::= { tnY1564ReportMgmt 1 }
|
|
|
|
tnY1564ReportEntry OBJECT-TYPE
|
|
SYNTAX TnY1564ReportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A entry in the table represents a configuration for local SOAM."
|
|
INDEX { IMPLIED tnY1564ReportName }
|
|
::= { tnY1564ReportTable 1 }
|
|
|
|
TnY1564ReportEntry ::=
|
|
SEQUENCE{
|
|
tnY1564ReportName SnmpAdminString,
|
|
tnY1564ReportDscr DisplayString,
|
|
tnY1564ReportTime DisplayString,
|
|
tnY1564ReportTftpAddrType InetAddressType,
|
|
tnY1564ReportTftpAddr InetAddress,
|
|
tnY1564ReportTestStatus INTEGER,
|
|
tnY1564ReportAction INTEGER
|
|
}
|
|
|
|
tnY1564ReportName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name, ASCII range 33-126, of this table."
|
|
::= { tnY1564ReportEntry 1 }
|
|
|
|
tnY1564ReportDscr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of this table."
|
|
::= { tnY1564ReportEntry 2 }
|
|
|
|
tnY1564ReportTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (26))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of this table."
|
|
::= { tnY1564ReportEntry 3 }
|
|
|
|
tnY1564ReportTftpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tftp server IP address type. "
|
|
::= { tnY1564ReportEntry 4 }
|
|
|
|
tnY1564ReportTftpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tftp server IP address. "
|
|
::= { tnY1564ReportEntry 5 }
|
|
|
|
tnY1564ReportTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
executing(2),
|
|
cancelling(3),
|
|
cancelled(4),
|
|
passed(5),
|
|
failed(6)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { tnY1564ReportEntry 6 }
|
|
|
|
tnY1564ReportAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
cancelTest(2),
|
|
saveReport(3),
|
|
deleteReport(4)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { tnY1564ReportEntry 7 }
|
|
END
|