4383 lines
178 KiB
Plaintext
4383 lines
178 KiB
Plaintext
ADSL-LINE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Counter32, Gauge32,
|
|
NOTIFICATION-TYPE,
|
|
transmission, Unsigned32 FROM SNMPv2-SMI
|
|
RowStatus,
|
|
TruthValue, VariablePointer FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
PerfCurrentCount,
|
|
PerfIntervalCount FROM PerfHist-TC-MIB
|
|
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
AdslPerfCurrDayCount,
|
|
AdslPerfPrevDayCount,
|
|
AdslPerfTimeElapsed,
|
|
AdslLineCodingType FROM ADSL-TC-MIB
|
|
;
|
|
|
|
adslMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "9908190000Z"
|
|
|
|
ORGANIZATION "IETF ADSL MIB Working Group"
|
|
|
|
CONTACT-INFO
|
|
"
|
|
Gregory Bathrick
|
|
AG Communication Systems
|
|
A Subsidiary of Lucent Technologies
|
|
2500 W Utopia Rd.
|
|
Phoenix, AZ 85027 USA
|
|
Tel: +1 602-582-7679
|
|
Fax: +1 602-582-7697
|
|
E-mail: bathricg@agcs.com
|
|
|
|
Faye Ly
|
|
Copper Mountain Networks
|
|
Norcal Office
|
|
2470 Embarcadero Way
|
|
Palo Alto, CA 94303
|
|
Tel: +1 650-858-8500
|
|
Fax: +1 650-858-8085
|
|
E-Mail: faye@coppermountain.com
|
|
|
|
(ADSL Forum input only)
|
|
John Burgess
|
|
Predictive Systems, Inc.
|
|
25A Vreeland Rd.
|
|
Florham Park, NJ 07932 USA
|
|
Tel: +1 973-301-5610
|
|
Fax: +1 973-301-5699
|
|
E-mail: jtburgess@predictive.com
|
|
|
|
IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
|
|
"
|
|
|
|
DESCRIPTION
|
|
"The MIB module defining objects for the management of a pair of
|
|
ADSL modems at each end of the ADSL line. Each such line has
|
|
|
|
an entry in an ifTable which may include multiple modem lines.
|
|
An agent may reside at either end of the ADSL line however the
|
|
MIB is designed to require no management communication between
|
|
them beyond that inherent in the low-level ADSL line protocol.
|
|
The agent may monitor and control this protocol for its needs.
|
|
|
|
ADSL lines may support optional Fast or Interleaved channels.
|
|
If these are supported, additional entries corresponding to the
|
|
supported channels must be created in the ifTable. Thus an ADSL
|
|
line that supports both channels will have three entries in the
|
|
ifTable, one for each physical, fast, and interleaved, whose
|
|
ifType values are equal to adsl(94), fast(125), and
|
|
interleaved(124), respectively. The ifStackTable is used to
|
|
represent the relationship between the entries.
|
|
|
|
Naming Conventions:
|
|
Atuc -- (ATUC) modem at near (Central) end of line
|
|
Atur -- (ATUR) modem at Remote end of line
|
|
Curr -- Current
|
|
Prev -- Previous
|
|
Atn -- Attenuation
|
|
ES -- Errored Second.
|
|
LCS -- Line Code Specific
|
|
Lof -- Loss of Frame
|
|
Lol -- Loss of Link
|
|
Los -- Loss of Signal
|
|
Lpr -- Loss of Power
|
|
xxxs-- interval of Seconds in which xxx occurs
|
|
(e.g., xxx=Lof, Los, Lpr)
|
|
Max -- Maximum
|
|
Mgn -- Margin
|
|
Min -- Minimum
|
|
Psd -- Power Spectral Density
|
|
Snr -- Signal to Noise Ratio
|
|
Tx -- Transmit
|
|
Blks-- Blocks, a data unit, see
|
|
adslAtuXChanCrcBlockLength
|
|
"
|
|
-- Revision history
|
|
REVISION "9908190000Z" -- 19 August 1999, midnight
|
|
DESCRIPTION "Initial Version, published as RFC 2662"
|
|
|
|
::= { transmission 94 }
|
|
|
|
adslLineMib OBJECT IDENTIFIER ::= { adslMIB 1 }
|
|
|
|
adslMibObjects OBJECT IDENTIFIER ::= { adslLineMib 1 }
|
|
|
|
-- objects
|
|
adslLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes common attributes describing
|
|
both ends of the line. It is required for all ADSL
|
|
physical interfaces. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 1 }
|
|
|
|
adslLineEntry OBJECT-TYPE
|
|
SYNTAX AdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in adslLineTable."
|
|
INDEX { ifIndex }
|
|
::= { adslLineTable 1 }
|
|
|
|
AdslLineEntry ::=
|
|
SEQUENCE {
|
|
adslLineCoding AdslLineCodingType,
|
|
adslLineType INTEGER,
|
|
adslLineSpecific VariablePointer,
|
|
adslLineConfProfile SnmpAdminString,
|
|
adslLineAlarmConfProfile SnmpAdminString
|
|
}
|
|
|
|
adslLineCoding OBJECT-TYPE
|
|
SYNTAX AdslLineCodingType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL coding type used on this
|
|
line."
|
|
::= { adslLineEntry 1 }
|
|
|
|
adslLineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noChannel (1), -- no channels exist
|
|
fastOnly (2), -- fast channel exists only
|
|
interleavedOnly (3), -- interleaved channel exists
|
|
-- only
|
|
fastOrInterleaved (4),-- either fast or interleaved
|
|
-- channels can exist, but
|
|
-- only one at any time
|
|
fastAndInterleaved (5)-- both fast or interleaved
|
|
|
|
-- channels exist
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the type of ADSL physical line
|
|
entity that exists, by defining whether and how
|
|
the line is channelized. If the line is channelized,
|
|
the value will be other than noChannel(1). This
|
|
object defines which channel type(s) are supported.
|
|
|
|
In the case that the line is channelized, the manager
|
|
can use the ifStackTable to determine the ifIndex for
|
|
the associated channel(s)."
|
|
::= { adslLineEntry 2 }
|
|
|
|
adslLineSpecific OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OID instance in vendor-specific MIB. The Instance may
|
|
be used to determine shelf/slot/port of the ATUC
|
|
interface in a DSLAM."
|
|
::= { adslLineEntry 3 }
|
|
|
|
adslLineConfProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row
|
|
in the ADSL Line Configuration Profile Table,
|
|
(adslLineConfProfileTable), which applies for this
|
|
ADSL line, and channels if applicable.
|
|
|
|
For `dynamic' mode, in the case which the
|
|
configuration profile has not been set, the
|
|
value will be set to `DEFVAL'.
|
|
|
|
If the implementator of this MIB has chosen not
|
|
to implement `dynamic assignment' of profiles, this
|
|
object's MIN-ACCESS is read-only."
|
|
::= { adslLineEntry 4 }
|
|
|
|
adslLineAlarmConfProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row
|
|
in the ADSL Line Alarm Configuration Profile Table,
|
|
(adslLineAlarmConfProfileTable), which applies to this
|
|
ADSL line, and channels if applicable.
|
|
|
|
For `dynamic' mode, in the case which the
|
|
alarm profile has not been set, the
|
|
value will be set to `DEFVAL'.
|
|
|
|
If the implementator of this MIB has chosen not
|
|
to implement `dynamic assignment' of profiles, this
|
|
object's MIN-ACCESS is read-only."
|
|
::= { adslLineEntry 5 }
|
|
|
|
adslAtucPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC.
|
|
Each row contains the Physical Layer Parameters
|
|
table for that ATUC. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 2 }
|
|
|
|
adslAtucPhysEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAtucPhysTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAtucPhysTable 1 }
|
|
|
|
AdslAtucPhysEntry ::=
|
|
SEQUENCE {
|
|
adslAtucInvSerialNumber SnmpAdminString,
|
|
adslAtucInvVendorID SnmpAdminString,
|
|
adslAtucInvVersionNumber SnmpAdminString,
|
|
adslAtucCurrSnrMgn INTEGER,
|
|
adslAtucCurrAtn Gauge32,
|
|
adslAtucCurrStatus BITS,
|
|
adslAtucCurrOutputPwr INTEGER,
|
|
adslAtucCurrAttainableRate Gauge32
|
|
}
|
|
|
|
-- inventory group
|
|
|
|
--
|
|
-- These items should describe the lowest level identifiable
|
|
-- component, be it a stand-alone modem, a card in a rack,
|
|
-- a child-board, etc.
|
|
--
|
|
adslAtucInvSerialNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
::= { adslAtucPhysEntry 1 }
|
|
|
|
adslAtucInvVendorID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
|
|
REFERENCE "ANSI T1.413[10]"
|
|
::= { adslAtucPhysEntry 2 }
|
|
|
|
adslAtucInvVersionNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this ATU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
REFERENCE "ANSI T1.413[10]"
|
|
::= { adslAtucPhysEntry 3 }
|
|
|
|
-- current status group
|
|
--
|
|
adslAtucCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (-640..640)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this ATU with respect to its
|
|
received signal in tenth dB."
|
|
|
|
::= { adslAtucPhysEntry 4 }
|
|
|
|
adslAtucCurrAtn OBJECT-TYPE
|
|
SYNTAX Gauge32(0..630)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured difference in the total power transmitted by
|
|
the peer ATU and the total power received by this ATU."
|
|
::= { adslAtucPhysEntry 5 }
|
|
|
|
adslAtucCurrStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
lossOfFraming(1),
|
|
lossOfSignal(2),
|
|
lossOfPower(3),
|
|
lossOfSignalQuality(4),
|
|
lossOfLink(5),
|
|
dataInitFailure(6),
|
|
configInitFailure(7),
|
|
protocolInitFailure(8),
|
|
noPeerAtuPresent(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates current state of the ATUC line. This is a
|
|
bit-map of possible conditions. The various bit
|
|
positions are:
|
|
|
|
0 noDefect There no defects on the line
|
|
|
|
1 lossOfFraming ATUC failure due to not
|
|
receiving valid frame.
|
|
|
|
2 lossOfSignal ATUC failure due to not
|
|
receiving signal.
|
|
|
|
3 lossOfPower ATUC failure due to loss of
|
|
power.
|
|
Note: the Agent may still
|
|
function.
|
|
|
|
4 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
|
|
Margin, or the bit-error-rate
|
|
exceeds 10^-7.
|
|
|
|
5 lossOfLink ATUC failure due to inability
|
|
to link with ATUR.
|
|
|
|
6 dataInitFailure ATUC failure during
|
|
initialization due to bit
|
|
errors corrupting startup
|
|
exchange data.
|
|
|
|
7 configInitFailure ATUC failure during
|
|
initialization due to peer
|
|
ATU not able to support
|
|
requested configuration
|
|
|
|
8 protocolInitFailure ATUC failure during
|
|
initialization due to
|
|
incompatible protocol used by
|
|
the peer ATU.
|
|
|
|
9 noPeerAtuPresent ATUC failure during
|
|
initialization due to no
|
|
activation sequence detected
|
|
from peer ATU.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { adslAtucPhysEntry 6 }
|
|
|
|
adslAtucCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER (-310..310)
|
|
UNITS "tenth dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured total output power transmitted by this ATU.
|
|
This is the measurement that was reported during
|
|
the last activation sequence."
|
|
::= { adslAtucPhysEntry 7 }
|
|
|
|
adslAtucCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum currently attainable data rate
|
|
by the ATU. This value will be equal or greater than
|
|
|
|
the current line rate."
|
|
::= { adslAtucPhysEntry 8 }
|
|
|
|
adslAturPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR
|
|
Each row contains the Physical Layer Parameters
|
|
table for that ATUR. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 3 }
|
|
|
|
adslAturPhysEntry OBJECT-TYPE
|
|
SYNTAX AdslAturPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAturPhysTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAturPhysTable 1 }
|
|
|
|
AdslAturPhysEntry ::=
|
|
SEQUENCE {
|
|
adslAturInvSerialNumber SnmpAdminString,
|
|
adslAturInvVendorID SnmpAdminString,
|
|
adslAturInvVersionNumber SnmpAdminString,
|
|
adslAturCurrSnrMgn INTEGER,
|
|
adslAturCurrAtn Gauge32,
|
|
adslAturCurrStatus BITS,
|
|
adslAturCurrOutputPwr INTEGER,
|
|
adslAturCurrAttainableRate Gauge32
|
|
}
|
|
|
|
-- inventory group
|
|
--
|
|
adslAturInvSerialNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
::= { adslAturPhysEntry 1 }
|
|
|
|
adslAturInvVendorID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
REFERENCE "ANSI T1.413"
|
|
::= { adslAturPhysEntry 2 }
|
|
|
|
adslAturInvVersionNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this ATU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
REFERENCE "ANSI T1.413"
|
|
::= { adslAturPhysEntry 3 }
|
|
|
|
-- current status group
|
|
--
|
|
adslAturCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (-640..640)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this ATU with respect to its
|
|
received signal in tenth dB."
|
|
::= { adslAturPhysEntry 4 }
|
|
|
|
adslAturCurrAtn OBJECT-TYPE
|
|
SYNTAX Gauge32(0..630)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured difference in the total power transmitted by
|
|
the peer ATU and the total power received by this ATU."
|
|
::= { adslAturPhysEntry 5 }
|
|
|
|
adslAturCurrStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
lossOfFraming(1),
|
|
lossOfSignal(2),
|
|
lossOfPower(3),
|
|
|
|
lossOfSignalQuality(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates current state of the ATUR line. This is a
|
|
bit-map of possible conditions. Due to the isolation
|
|
of the ATUR when line problems occur, many state
|
|
conditions like loss of power, loss of quality signal,
|
|
and initialization errors, can not be determined.
|
|
While trouble shooting ATUR, also use object,
|
|
adslAtucCurrStatus. The various bit positions are:
|
|
|
|
0 noDefect There no defects on the line
|
|
|
|
1 lossOfFraming ATUR failure due to not
|
|
receiving valid frame
|
|
|
|
2 lossOfSignal ATUR failure due to not
|
|
receiving signal
|
|
|
|
3 lossOfPower ATUR failure due to loss of
|
|
power
|
|
|
|
4 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
Margin, or the
|
|
bit-error-rate exceeds 10^-7.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { adslAturPhysEntry 6 }
|
|
|
|
adslAturCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER (-310..310)
|
|
UNITS "tenth dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured total output power transmitted by this ATU.
|
|
This is the measurement that was reported during
|
|
the last activation sequence."
|
|
::= { adslAturPhysEntry 7 }
|
|
|
|
adslAturCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum currently attainable data rate
|
|
by the ATU. This value will be equal or greater than
|
|
the current line rate."
|
|
::= { adslAturPhysEntry 8 }
|
|
|
|
adslAtucChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 4 }
|
|
|
|
adslAtucChanEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAtucChanTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAtucChanTable 1 }
|
|
|
|
AdslAtucChanEntry ::=
|
|
SEQUENCE {
|
|
adslAtucChanInterleaveDelay Gauge32,
|
|
adslAtucChanCurrTxRate Gauge32,
|
|
adslAtucChanPrevTxRate Gauge32,
|
|
adslAtucChanCrcBlockLength Gauge32
|
|
}
|
|
|
|
-- current group
|
|
--
|
|
adslAtucChanInterleaveDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the
|
|
interleave channel and defines the mapping
|
|
(relative spacing) between subsequent input
|
|
bytes at the interleaver input and their placement
|
|
|
|
in the bit stream at the interleaver output.
|
|
Larger numbers provide greater separation between
|
|
consecutive input bytes in the output bit stream
|
|
allowing for improved impulse noise immunity at
|
|
the expense of payload latency.
|
|
|
|
In the case where the ifType is Fast(125), use
|
|
noSuchObject."
|
|
::= { adslAtucChanEntry 1 }
|
|
|
|
adslAtucChanCurrTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual transmit rate on this channel."
|
|
::= { adslAtucChanEntry 2 }
|
|
|
|
adslAtucChanPrevTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate at the time of the last
|
|
adslAtucRateChangeTrap event. It is also set at
|
|
initialization to prevent a trap being sent.
|
|
|
|
Rate changes less than adslAtucThresh(*)RateDown
|
|
or less than adslAtucThresh(*)RateUp will not
|
|
cause a trap or cause this object to change.
|
|
(*) == Fast or Interleave.
|
|
See AdslLineAlarmConfProfileEntry."
|
|
::= { adslAtucChanEntry 3 }
|
|
|
|
adslAtucChanCrcBlockLength OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the length of the channel data-block
|
|
on which the CRC operates. Refer to Line Code
|
|
Specific MIBs, [11] and [12] for more
|
|
information."
|
|
::= { adslAtucChanEntry 4 }
|
|
|
|
adslAturChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 5 }
|
|
|
|
adslAturChanEntry OBJECT-TYPE
|
|
SYNTAX AdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAturChanTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAturChanTable 1 }
|
|
|
|
AdslAturChanEntry ::=
|
|
SEQUENCE {
|
|
adslAturChanInterleaveDelay Gauge32,
|
|
adslAturChanCurrTxRate Gauge32,
|
|
adslAturChanPrevTxRate Gauge32,
|
|
adslAturChanCrcBlockLength Gauge32
|
|
}
|
|
|
|
-- current group
|
|
--
|
|
adslAturChanInterleaveDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the
|
|
interleave channel and defines the mapping
|
|
(relative spacing) between subsequent input
|
|
bytes at the interleaver input and their placement
|
|
in the bit stream at the interleaver output.
|
|
Larger numbers provide greater separation between
|
|
consecutive input bytes in the output bit stream
|
|
allowing for improved impulse noise immunity at
|
|
the expense of payload latency.
|
|
|
|
In the case where the ifType is Fast(125), use
|
|
|
|
noSuchObject."
|
|
::= { adslAturChanEntry 1 }
|
|
|
|
adslAturChanCurrTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual transmit rate on this channel."
|
|
::= { adslAturChanEntry 2 }
|
|
|
|
adslAturChanPrevTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate at the time of the last
|
|
adslAturRateChangeTrap event. It is also set at
|
|
initialization to prevent a trap being sent.
|
|
Rate changes less than adslAturThresh(*)RateDown
|
|
or less than adslAturThresh(*)RateUp will not
|
|
cause a trap or cause this object to change.
|
|
(*) == Fast or Interleave.
|
|
See AdslLineAlarmConfProfileEntry."
|
|
::= { adslAturChanEntry 3 }
|
|
|
|
adslAturChanCrcBlockLength OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the length of the channel data-block
|
|
on which the CRC operates. Refer to Line Code
|
|
Specific MIBs, [11] and [12] for more
|
|
information."
|
|
::= { adslAturChanEntry 4 }
|
|
|
|
adslAtucPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC.
|
|
ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 6 }
|
|
|
|
adslAtucPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in adslAtucPerfDataTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAtucPerfDataTable 1 }
|
|
|
|
AdslAtucPerfDataEntry ::=
|
|
SEQUENCE {
|
|
adslAtucPerfLofs Counter32,
|
|
adslAtucPerfLoss Counter32,
|
|
adslAtucPerfLols Counter32,
|
|
adslAtucPerfLprs Counter32,
|
|
adslAtucPerfESs Counter32,
|
|
adslAtucPerfInits Counter32,
|
|
adslAtucPerfValidIntervals INTEGER,
|
|
adslAtucPerfInvalidIntervals INTEGER,
|
|
adslAtucPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
|
|
adslAtucPerfCurr15MinLofs PerfCurrentCount,
|
|
adslAtucPerfCurr15MinLoss PerfCurrentCount,
|
|
adslAtucPerfCurr15MinLols PerfCurrentCount,
|
|
adslAtucPerfCurr15MinLprs PerfCurrentCount,
|
|
adslAtucPerfCurr15MinESs PerfCurrentCount,
|
|
adslAtucPerfCurr15MinInits PerfCurrentCount,
|
|
adslAtucPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
|
|
adslAtucPerfCurr1DayLofs AdslPerfCurrDayCount,
|
|
adslAtucPerfCurr1DayLoss AdslPerfCurrDayCount,
|
|
adslAtucPerfCurr1DayLols AdslPerfCurrDayCount,
|
|
adslAtucPerfCurr1DayLprs AdslPerfCurrDayCount,
|
|
adslAtucPerfCurr1DayESs AdslPerfCurrDayCount,
|
|
adslAtucPerfCurr1DayInits AdslPerfCurrDayCount,
|
|
adslAtucPerfPrev1DayMoniSecs INTEGER,
|
|
adslAtucPerfPrev1DayLofs AdslPerfPrevDayCount,
|
|
adslAtucPerfPrev1DayLoss AdslPerfPrevDayCount,
|
|
adslAtucPerfPrev1DayLols AdslPerfPrevDayCount,
|
|
adslAtucPerfPrev1DayLprs AdslPerfPrevDayCount,
|
|
adslAtucPerfPrev1DayESs AdslPerfPrevDayCount,
|
|
adslAtucPerfPrev1DayInits AdslPerfPrevDayCount
|
|
}
|
|
|
|
-- Event Counters
|
|
--
|
|
-- Also see adslAtucIntervalTable for 15 minute interval
|
|
-- elapsed counters.
|
|
--
|
|
adslAtucPerfLofs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 1 }
|
|
|
|
adslAtucPerfLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 2 }
|
|
|
|
adslAtucPerfLols OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Link failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 3 }
|
|
|
|
adslAtucPerfLprs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 4 }
|
|
|
|
adslAtucPerfESs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 5 }
|
|
|
|
adslAtucPerfInits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts since
|
|
agent reset. Includes both successful and failed
|
|
attempts."
|
|
::= { adslAtucPerfDataEntry 6 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
|
|
adslAtucPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAtucPerfDataEntry 7 }
|
|
|
|
adslAtucPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAtucPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAtucPerfDataEntry 8 }
|
|
|
|
-- 15 min current performance group
|
|
--
|
|
adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { adslAtucPerfDataEntry 9 }
|
|
|
|
adslAtucPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { adslAtucPerfDataEntry 10 }
|
|
|
|
adslAtucPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { adslAtucPerfDataEntry 11 }
|
|
|
|
adslAtucPerfCurr15MinLols OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Link."
|
|
::= { adslAtucPerfDataEntry 12 }
|
|
|
|
adslAtucPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { adslAtucPerfDataEntry 13 }
|
|
|
|
adslAtucPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the current 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 14 }
|
|
|
|
adslAtucPerfCurr15MinInits OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the
|
|
current 15 minute interval. Includes both successful
|
|
and failed attempts."
|
|
::= { adslAtucPerfDataEntry 15 }
|
|
|
|
-- 1-day current and previous performance group
|
|
--
|
|
adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the current 1-day interval."
|
|
::= { adslAtucPerfDataEntry 16 }
|
|
|
|
adslAtucPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Framing during the current day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 17 }
|
|
|
|
adslAtucPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Count of the number of seconds when there was Loss of
|
|
Signal during the current day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 18 }
|
|
|
|
adslAtucPerfCurr1DayLols OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Link during the current day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 19 }
|
|
|
|
adslAtucPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Power during the current day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 20 }
|
|
|
|
adslAtucPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the current day as
|
|
measured by adslAtucPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 21 }
|
|
|
|
adslAtucPerfCurr1DayInits OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the
|
|
day as measured by adslAtucPerfCurr1DayTimeElapsed.
|
|
Includes both successful and failed attempts."
|
|
|
|
::= { adslAtucPerfDataEntry 22 }
|
|
|
|
adslAtucPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAtucPerfDataEntry 23 }
|
|
|
|
adslAtucPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 24 }
|
|
|
|
adslAtucPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 25 }
|
|
|
|
adslAtucPerfPrev1DayLols OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Link within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 26 }
|
|
|
|
adslAtucPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 27 }
|
|
|
|
adslAtucPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 28 }
|
|
|
|
adslAtucPerfPrev1DayInits OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the most
|
|
recent previous 1-day period. Includes both successful
|
|
and failed attempts."
|
|
::= { adslAtucPerfDataEntry 29 }
|
|
|
|
adslAturPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR.
|
|
ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 7 }
|
|
|
|
adslAturPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in adslAturPerfDataTable."
|
|
|
|
INDEX { ifIndex }
|
|
::= { adslAturPerfDataTable 1 }
|
|
|
|
AdslAturPerfDataEntry ::=
|
|
SEQUENCE {
|
|
adslAturPerfLofs Counter32,
|
|
adslAturPerfLoss Counter32,
|
|
adslAturPerfLprs Counter32,
|
|
adslAturPerfESs Counter32,
|
|
adslAturPerfValidIntervals INTEGER,
|
|
adslAturPerfInvalidIntervals INTEGER,
|
|
adslAturPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
|
|
adslAturPerfCurr15MinLofs PerfCurrentCount,
|
|
adslAturPerfCurr15MinLoss PerfCurrentCount,
|
|
adslAturPerfCurr15MinLprs PerfCurrentCount,
|
|
adslAturPerfCurr15MinESs PerfCurrentCount,
|
|
adslAturPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
|
|
adslAturPerfCurr1DayLofs AdslPerfCurrDayCount,
|
|
adslAturPerfCurr1DayLoss AdslPerfCurrDayCount,
|
|
adslAturPerfCurr1DayLprs AdslPerfCurrDayCount,
|
|
adslAturPerfCurr1DayESs AdslPerfCurrDayCount,
|
|
adslAturPerfPrev1DayMoniSecs INTEGER,
|
|
adslAturPerfPrev1DayLofs AdslPerfPrevDayCount,
|
|
adslAturPerfPrev1DayLoss AdslPerfPrevDayCount,
|
|
adslAturPerfPrev1DayLprs AdslPerfPrevDayCount,
|
|
adslAturPerfPrev1DayESs AdslPerfPrevDayCount
|
|
}
|
|
|
|
-- Event (Raw) Counters
|
|
--
|
|
-- Also see adslAturIntervalTable for 15 minute interval
|
|
-- elapsed counters.
|
|
--
|
|
adslAturPerfLofs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 1 }
|
|
|
|
adslAturPerfLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 2 }
|
|
|
|
adslAturPerfLprs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 3 }
|
|
|
|
adslAturPerfESs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 4 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
adslAturPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAturPerfDataEntry 5 }
|
|
|
|
adslAturPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAturPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAturPerfDataEntry 6 }
|
|
|
|
-- 15 min current performance group
|
|
--
|
|
adslAturPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { adslAturPerfDataEntry 7 }
|
|
|
|
adslAturPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { adslAturPerfDataEntry 8 }
|
|
|
|
adslAturPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { adslAturPerfDataEntry 9 }
|
|
|
|
adslAturPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the current 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { adslAturPerfDataEntry 10 }
|
|
|
|
adslAturPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the current 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
|
|
::= { adslAturPerfDataEntry 11 }
|
|
|
|
-- 1-day current and previous performance group
|
|
--
|
|
adslAturPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the current 1-day interval."
|
|
::= { adslAturPerfDataEntry 12 }
|
|
|
|
adslAturPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Framing during the current day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 13 }
|
|
|
|
adslAturPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Count of the number of seconds when there was Loss
|
|
of Signal during the current day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 14 }
|
|
|
|
adslAturPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Power during the current day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 15 }
|
|
|
|
adslAturPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the current day as
|
|
measured by adslAturPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 16 }
|
|
|
|
adslAturPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAturPerfDataEntry 17 }
|
|
|
|
adslAturPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 18 }
|
|
|
|
adslAturPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 19 }
|
|
|
|
adslAturPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 20 }
|
|
|
|
adslAturPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 21 }
|
|
|
|
adslAtucIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC
|
|
performance data collection interval.
|
|
ADSL physical interfaces are
|
|
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 8 }
|
|
|
|
adslAtucIntervalEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAtucIntervalTable."
|
|
INDEX { ifIndex, adslAtucIntervalNumber }
|
|
::= { adslAtucIntervalTable 1 }
|
|
|
|
AdslAtucIntervalEntry ::=
|
|
SEQUENCE {
|
|
adslAtucIntervalNumber INTEGER,
|
|
adslAtucIntervalLofs PerfIntervalCount,
|
|
adslAtucIntervalLoss PerfIntervalCount,
|
|
adslAtucIntervalLols PerfIntervalCount,
|
|
adslAtucIntervalLprs PerfIntervalCount,
|
|
adslAtucIntervalESs PerfIntervalCount,
|
|
adslAtucIntervalInits PerfIntervalCount,
|
|
adslAtucIntervalValidData TruthValue
|
|
}
|
|
|
|
adslAtucIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { adslAtucIntervalEntry 1 }
|
|
|
|
adslAtucIntervalLofs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Framing."
|
|
::= { adslAtucIntervalEntry 2 }
|
|
|
|
adslAtucIntervalLoss OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Signal."
|
|
::= { adslAtucIntervalEntry 3 }
|
|
|
|
adslAtucIntervalLols OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Link."
|
|
::= { adslAtucIntervalEntry 4 }
|
|
|
|
adslAtucIntervalLprs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Power."
|
|
::= { adslAtucIntervalEntry 5 }
|
|
|
|
adslAtucIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the interval.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucIntervalEntry 6 }
|
|
|
|
adslAtucIntervalInits OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts
|
|
during the interval. Includes both successful
|
|
and failed attempts."
|
|
::= { adslAtucIntervalEntry 7 }
|
|
|
|
adslAtucIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { adslAtucIntervalEntry 8 }
|
|
|
|
adslAturIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR
|
|
performance data collection interval.
|
|
ADSL physical interfaces are those
|
|
ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 9 }
|
|
|
|
adslAturIntervalEntry OBJECT-TYPE
|
|
SYNTAX AdslAturIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAturIntervalTable."
|
|
INDEX { ifIndex, adslAturIntervalNumber }
|
|
::= { adslAturIntervalTable 1 }
|
|
|
|
AdslAturIntervalEntry ::=
|
|
SEQUENCE {
|
|
adslAturIntervalNumber INTEGER,
|
|
adslAturIntervalLofs PerfIntervalCount,
|
|
adslAturIntervalLoss PerfIntervalCount,
|
|
adslAturIntervalLprs PerfIntervalCount,
|
|
adslAturIntervalESs PerfIntervalCount,
|
|
adslAturIntervalValidData TruthValue
|
|
}
|
|
|
|
adslAturIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { adslAturIntervalEntry 1 }
|
|
|
|
adslAturIntervalLofs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing."
|
|
::= { adslAturIntervalEntry 2 }
|
|
|
|
adslAturIntervalLoss OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal."
|
|
::= { adslAturIntervalEntry 3 }
|
|
|
|
adslAturIntervalLprs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power."
|
|
::= { adslAturIntervalEntry 4 }
|
|
|
|
adslAturIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the interval.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturIntervalEntry 5 }
|
|
|
|
adslAturIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
|
|
interval is valid."
|
|
::= { adslAturIntervalEntry 6 }
|
|
|
|
adslAtucChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 10 }
|
|
|
|
adslAtucChanPerfDataEntry OBJECT-TYPE
|
|
|
|
SYNTAX AdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in adslAtucChanPerfDataTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAtucChanPerfDataTable 1 }
|
|
|
|
AdslAtucChanPerfDataEntry ::=
|
|
SEQUENCE {
|
|
adslAtucChanReceivedBlks Counter32,
|
|
adslAtucChanTransmittedBlks Counter32,
|
|
adslAtucChanCorrectedBlks Counter32,
|
|
adslAtucChanUncorrectBlks Counter32,
|
|
adslAtucChanPerfValidIntervals INTEGER,
|
|
adslAtucChanPerfInvalidIntervals INTEGER,
|
|
adslAtucChanPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
|
|
adslAtucChanPerfCurr15MinReceivedBlks PerfCurrentCount,
|
|
adslAtucChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
|
|
adslAtucChanPerfCurr15MinCorrectedBlks PerfCurrentCount,
|
|
adslAtucChanPerfCurr15MinUncorrectBlks PerfCurrentCount,
|
|
adslAtucChanPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
|
|
adslAtucChanPerfCurr1DayReceivedBlks AdslPerfCurrDayCount,
|
|
adslAtucChanPerfCurr1DayTransmittedBlks AdslPerfCurrDayCount,
|
|
adslAtucChanPerfCurr1DayCorrectedBlks AdslPerfCurrDayCount,
|
|
adslAtucChanPerfCurr1DayUncorrectBlks AdslPerfCurrDayCount,
|
|
adslAtucChanPerfPrev1DayMoniSecs INTEGER,
|
|
adslAtucChanPerfPrev1DayReceivedBlks AdslPerfPrevDayCount,
|
|
adslAtucChanPerfPrev1DayTransmittedBlks AdslPerfPrevDayCount,
|
|
adslAtucChanPerfPrev1DayCorrectedBlks AdslPerfPrevDayCount,
|
|
adslAtucChanPerfPrev1DayUncorrectBlks AdslPerfPrevDayCount
|
|
}
|
|
-- performance group
|
|
|
|
--
|
|
-- Note: block is intended to be the length of the channel
|
|
-- data-block on which the CRC operates. See
|
|
-- adslAtucChanCrcBlockLength for more information.
|
|
--
|
|
adslAtucChanReceivedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 1 }
|
|
|
|
adslAtucChanTransmittedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 2 }
|
|
|
|
adslAtucChanCorrectedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected since agent reset. These blocks are passed
|
|
on as good data."
|
|
::= { adslAtucChanPerfDataEntry 3 }
|
|
|
|
adslAtucChanUncorrectBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 4 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
adslAtucChanPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAtucChanPerfDataEntry 5 }
|
|
|
|
adslAtucChanPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAtucChanPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAtucChanPerfDataEntry 6 }
|
|
|
|
-- 15 min current performance group
|
|
--
|
|
adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { adslAtucChanPerfDataEntry 7 }
|
|
|
|
adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
within the current 15 minute interval."
|
|
::= { adslAtucChanPerfDataEntry 8 }
|
|
|
|
adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the current 15 minute interval."
|
|
::= { adslAtucChanPerfDataEntry 9 }
|
|
|
|
adslAtucChanPerfCurr15MinCorrectedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the current 15 minute
|
|
interval."
|
|
::= { adslAtucChanPerfDataEntry 10 }
|
|
|
|
adslAtucChanPerfCurr15MinUncorrectBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the current 15 minute
|
|
interval."
|
|
::= { adslAtucChanPerfDataEntry 11 }
|
|
|
|
-- 1-day current and previous performance group
|
|
--
|
|
adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the current 1-day interval."
|
|
::= { adslAtucChanPerfDataEntry 12 }
|
|
|
|
adslAtucChanPerfCurr1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel during the current day as measured by
|
|
|
|
adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 13 }
|
|
|
|
adslAtucChanPerfCurr1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during the current day as measured by
|
|
adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 14 }
|
|
|
|
adslAtucChanPerfCurr1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during the current day as
|
|
measured by adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 15 }
|
|
|
|
adslAtucChanPerfCurr1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during the current day as
|
|
measured by adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 16 }
|
|
|
|
adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAtucChanPerfDataEntry 17 }
|
|
|
|
adslAtucChanPerfPrev1DayReceivedBlks OBJECT-TYPE
|
|
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAtucChanPerfDataEntry 18 }
|
|
|
|
adslAtucChanPerfPrev1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAtucChanPerfDataEntry 19 }
|
|
|
|
adslAtucChanPerfPrev1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the most recent
|
|
previous 1-day period."
|
|
::= { adslAtucChanPerfDataEntry 20 }
|
|
|
|
adslAtucChanPerfPrev1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucChanPerfDataEntry 21 }
|
|
|
|
adslAturChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 11 }
|
|
|
|
adslAturChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in adslAturChanPerfDataTable."
|
|
INDEX { ifIndex }
|
|
::= { adslAturChanPerfDataTable 1 }
|
|
|
|
AdslAturChanPerfDataEntry ::=
|
|
SEQUENCE {
|
|
adslAturChanReceivedBlks Counter32,
|
|
adslAturChanTransmittedBlks Counter32,
|
|
adslAturChanCorrectedBlks Counter32,
|
|
adslAturChanUncorrectBlks Counter32,
|
|
adslAturChanPerfValidIntervals INTEGER,
|
|
adslAturChanPerfInvalidIntervals INTEGER,
|
|
adslAturChanPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
|
|
adslAturChanPerfCurr15MinReceivedBlks PerfCurrentCount,
|
|
adslAturChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
|
|
adslAturChanPerfCurr15MinCorrectedBlks PerfCurrentCount,
|
|
adslAturChanPerfCurr15MinUncorrectBlks PerfCurrentCount,
|
|
adslAturChanPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
|
|
adslAturChanPerfCurr1DayReceivedBlks AdslPerfCurrDayCount,
|
|
adslAturChanPerfCurr1DayTransmittedBlks AdslPerfCurrDayCount,
|
|
adslAturChanPerfCurr1DayCorrectedBlks AdslPerfCurrDayCount,
|
|
adslAturChanPerfCurr1DayUncorrectBlks AdslPerfCurrDayCount,
|
|
adslAturChanPerfPrev1DayMoniSecs INTEGER,
|
|
adslAturChanPerfPrev1DayReceivedBlks AdslPerfPrevDayCount,
|
|
adslAturChanPerfPrev1DayTransmittedBlks AdslPerfPrevDayCount,
|
|
adslAturChanPerfPrev1DayCorrectedBlks AdslPerfPrevDayCount,
|
|
adslAturChanPerfPrev1DayUncorrectBlks AdslPerfPrevDayCount
|
|
}
|
|
-- performance group
|
|
--
|
|
-- Note: block is intended to be the length of the channel
|
|
-- data-block on which the CRC operates. See
|
|
-- adslAturChanCrcBlockLength for more information.
|
|
--
|
|
adslAturChanReceivedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
since agent reset."
|
|
::= { adslAturChanPerfDataEntry 1 }
|
|
|
|
adslAturChanTransmittedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel since agent reset."
|
|
::= { adslAturChanPerfDataEntry 2 }
|
|
|
|
adslAturChanCorrectedBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected since agent reset. These blocks are passed
|
|
on as good data."
|
|
::= { adslAturChanPerfDataEntry 3 }
|
|
|
|
adslAturChanUncorrectBlks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors since agent reset."
|
|
::= { adslAturChanPerfDataEntry 4 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
adslAturChanPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAturChanPerfDataEntry 5 }
|
|
|
|
adslAturChanPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAturChanPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAturChanPerfDataEntry 6 }
|
|
|
|
-- 15 min current performance group
|
|
--
|
|
adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval.
|
|
A full interval is 900 seconds."
|
|
::= { adslAturChanPerfDataEntry 7 }
|
|
|
|
adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the current 15 minute interval."
|
|
::= { adslAturChanPerfDataEntry 8 }
|
|
|
|
adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the current 15 minute interval."
|
|
::= { adslAturChanPerfDataEntry 9 }
|
|
|
|
adslAturChanPerfCurr15MinCorrectedBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the current 15 minute
|
|
interval."
|
|
::= { adslAturChanPerfDataEntry 10 }
|
|
|
|
adslAturChanPerfCurr15MinUncorrectBlks OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the current 15 minute
|
|
interval."
|
|
::= { adslAturChanPerfDataEntry 11 }
|
|
|
|
-- 1-day current and previous performance group
|
|
--
|
|
adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX AdslPerfTimeElapsed(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the current 1-day interval."
|
|
::= { adslAturChanPerfDataEntry 12 }
|
|
|
|
adslAturChanPerfCurr1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel during the current day as measured by
|
|
adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 13 }
|
|
|
|
adslAturChanPerfCurr1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during the current day as measured by
|
|
adslAturChanPerfCurr1DayTimeElapsed."
|
|
|
|
::= { adslAturChanPerfDataEntry 14 }
|
|
|
|
adslAturChanPerfCurr1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during the current day as
|
|
measured by adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 15 }
|
|
|
|
adslAturChanPerfCurr1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfCurrDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during the current day as
|
|
measured by adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 16 }
|
|
|
|
adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAturChanPerfDataEntry 17 }
|
|
|
|
adslAturChanPerfPrev1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAturChanPerfDataEntry 18 }
|
|
|
|
adslAturChanPerfPrev1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAturChanPerfDataEntry 19 }
|
|
|
|
adslAturChanPerfPrev1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the most recent
|
|
previous 1-day period."
|
|
::= { adslAturChanPerfDataEntry 20 }
|
|
|
|
adslAturChanPerfPrev1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX AdslPerfPrevDayCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the most recent previous
|
|
1-day period."
|
|
::= { adslAturChanPerfDataEntry 21 }
|
|
|
|
adslAtucChanIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC channel's
|
|
performance data collection interval.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 12 }
|
|
|
|
adslAtucChanIntervalEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAtucIntervalTable."
|
|
INDEX { ifIndex, adslAtucChanIntervalNumber }
|
|
::= { adslAtucChanIntervalTable 1 }
|
|
|
|
AdslAtucChanIntervalEntry ::=
|
|
SEQUENCE {
|
|
|
|
adslAtucChanIntervalNumber INTEGER,
|
|
adslAtucChanIntervalReceivedBlks PerfIntervalCount,
|
|
adslAtucChanIntervalTransmittedBlks PerfIntervalCount,
|
|
adslAtucChanIntervalCorrectedBlks PerfIntervalCount,
|
|
adslAtucChanIntervalUncorrectBlks PerfIntervalCount,
|
|
adslAtucChanIntervalValidData TruthValue
|
|
}
|
|
adslAtucChanIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { adslAtucChanIntervalEntry 1 }
|
|
|
|
adslAtucChanIntervalReceivedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
during this interval."
|
|
::= { adslAtucChanIntervalEntry 2 }
|
|
|
|
adslAtucChanIntervalTransmittedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during this interval."
|
|
::= { adslAtucChanIntervalEntry 3 }
|
|
|
|
adslAtucChanIntervalCorrectedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during this interval."
|
|
::= { adslAtucChanIntervalEntry 4 }
|
|
|
|
adslAtucChanIntervalUncorrectBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during this interval."
|
|
::= { adslAtucChanIntervalEntry 5 }
|
|
|
|
adslAtucChanIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { adslAtucChanIntervalEntry 6 }
|
|
|
|
adslAturChanIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel's
|
|
performance data collection interval.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 13 }
|
|
|
|
adslAturChanIntervalEntry OBJECT-TYPE
|
|
SYNTAX AdslAturChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the adslAturIntervalTable."
|
|
INDEX { ifIndex, adslAturChanIntervalNumber }
|
|
::= { adslAturChanIntervalTable 1 }
|
|
|
|
AdslAturChanIntervalEntry ::=
|
|
SEQUENCE {
|
|
adslAturChanIntervalNumber INTEGER,
|
|
adslAturChanIntervalReceivedBlks PerfIntervalCount,
|
|
adslAturChanIntervalTransmittedBlks PerfIntervalCount,
|
|
adslAturChanIntervalCorrectedBlks PerfIntervalCount,
|
|
adslAturChanIntervalUncorrectBlks PerfIntervalCount,
|
|
adslAturChanIntervalValidData TruthValue
|
|
}
|
|
adslAturChanIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { adslAturChanIntervalEntry 1 }
|
|
|
|
adslAturChanIntervalReceivedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
during this interval."
|
|
::= { adslAturChanIntervalEntry 2 }
|
|
|
|
adslAturChanIntervalTransmittedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during this interval."
|
|
::= { adslAturChanIntervalEntry 3 }
|
|
|
|
adslAturChanIntervalCorrectedBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during this interval."
|
|
::= { adslAturChanIntervalEntry 4 }
|
|
|
|
adslAturChanIntervalUncorrectBlks OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during this interval."
|
|
::= { adslAturChanIntervalEntry 5 }
|
|
|
|
adslAturChanIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { adslAturChanIntervalEntry 6 }
|
|
|
|
-- Profile Group
|
|
--
|
|
|
|
adslLineConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslLineConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information on the ADSL line
|
|
configuration. One entry in this table reflects a
|
|
profile defined by a manager which can be used to
|
|
configure the ADSL line."
|
|
::= { adslMibObjects 14}
|
|
|
|
adslLineConfProfileEntry OBJECT-TYPE
|
|
SYNTAX AdslLineConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents the configuration of an ADSL modem.
|
|
|
|
When `dynamic' profiles are implemented, a default
|
|
profile will always exist. This profile's name will
|
|
be set to `DEFVAL' and its parameters will be set
|
|
to vendor specific values, unless otherwise specified
|
|
in this document.
|
|
|
|
When `static' profiles are implemented, profiles
|
|
are automaticly created or destroyed as ADSL
|
|
physical lines are discovered and removed by
|
|
the system. The name of the profile will be
|
|
equivalent to the decimal value of the line's
|
|
interface index.
|
|
"
|
|
INDEX { IMPLIED adslLineConfProfileName}
|
|
::= { adslLineConfProfileTable 1}
|
|
|
|
AdslLineConfProfileEntry ::=
|
|
SEQUENCE {
|
|
adslLineConfProfileName SnmpAdminString,
|
|
adslAtucConfRateMode INTEGER,
|
|
adslAtucConfRateChanRatio INTEGER,
|
|
adslAtucConfTargetSnrMgn INTEGER,
|
|
|
|
adslAtucConfMaxSnrMgn INTEGER,
|
|
adslAtucConfMinSnrMgn INTEGER,
|
|
adslAtucConfDownshiftSnrMgn INTEGER,
|
|
adslAtucConfUpshiftSnrMgn INTEGER,
|
|
adslAtucConfMinUpshiftTime INTEGER,
|
|
adslAtucConfMinDownshiftTime INTEGER,
|
|
adslAtucChanConfFastMinTxRate Unsigned32,
|
|
adslAtucChanConfInterleaveMinTxRate Unsigned32,
|
|
adslAtucChanConfFastMaxTxRate Unsigned32,
|
|
adslAtucChanConfInterleaveMaxTxRate Unsigned32,
|
|
adslAtucChanConfMaxInterleaveDelay INTEGER,
|
|
adslAturConfRateMode INTEGER,
|
|
adslAturConfRateChanRatio INTEGER,
|
|
adslAturConfTargetSnrMgn INTEGER,
|
|
adslAturConfMaxSnrMgn INTEGER,
|
|
adslAturConfMinSnrMgn INTEGER,
|
|
adslAturConfDownshiftSnrMgn INTEGER,
|
|
adslAturConfUpshiftSnrMgn INTEGER,
|
|
adslAturConfMinUpshiftTime INTEGER,
|
|
adslAturConfMinDownshiftTime INTEGER,
|
|
adslAturChanConfFastMinTxRate Unsigned32,
|
|
adslAturChanConfInterleaveMinTxRate Unsigned32,
|
|
adslAturChanConfFastMaxTxRate Unsigned32,
|
|
adslAturChanConfInterleaveMaxTxRate Unsigned32,
|
|
adslAturChanConfMaxInterleaveDelay INTEGER,
|
|
adslLineConfProfileRowStatus RowStatus
|
|
}
|
|
|
|
adslLineConfProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used by the line configuration table
|
|
in order to identify a row of this table.
|
|
|
|
When `dynamic' profiles are implemented, the profile
|
|
name is user specified. Also, the system will always
|
|
provide a default profile whose name is `DEFVAL'.
|
|
|
|
When `static' profiles are implemented, there is an
|
|
one-to-one relationship between each line and its
|
|
profile. In which case, the profile name will
|
|
need to algorithmicly represent the Line's ifIndex.
|
|
Therefore, the profile's name is a decimalized string
|
|
of the ifIndex that is fixed-length (i.e., 10) with
|
|
leading zero(s). For example, the profile name for
|
|
ifIndex which equals '15' will be '0000000015'."
|
|
|
|
::= { adslLineConfProfileEntry 1 }
|
|
|
|
adslAtucConfRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fixed (1), -- no rate adaptation
|
|
adaptAtStartup (2), -- perform rate adaptation
|
|
-- only at initialization
|
|
adaptAtRuntime (3) -- perform rate adaptation at
|
|
-- any time
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines what form of transmit rate adaptation is
|
|
configured on this modem. See ADSL Forum TR-005 [3]
|
|
for more information."
|
|
::= { adslLineConfProfileEntry 2 }
|
|
|
|
adslAtucConfRateChanRatio OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured allocation ratio of excess transmit
|
|
bandwidth between fast and interleaved channels. Only
|
|
applies when two channel mode and RADSL are supported.
|
|
Distribute bandwidth on each channel in excess of the
|
|
corresponding ChanConfMinTxRate so that:
|
|
adslAtucConfRateChanRatio =
|
|
|
|
[Fast / (Fast + Interleaved)] * 100
|
|
|
|
In other words this value is the fast channel
|
|
percentage."
|
|
::= { adslLineConfProfileEntry 3 }
|
|
|
|
adslAtucConfTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { adslLineConfProfileEntry 4 }
|
|
|
|
adslAtucConfMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { adslLineConfProfileEntry 5 }
|
|
|
|
adslAtucConfMinSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { adslLineConfProfileEntry 6 }
|
|
|
|
adslAtucConfDownshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate downshift.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to decrease its transmit rate. In
|
|
the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { adslLineConfProfileEntry 7 }
|
|
|
|
adslAtucConfUpshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate upshift.
|
|
If the noise margin rises above this level, the modem
|
|
should attempt to increase its transmit rate. In
|
|
the case that RADSL is not present, the value will
|
|
|
|
be `0'."
|
|
::= { adslLineConfProfileEntry 8 }
|
|
|
|
adslAtucConfMinUpshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time that the current margin is above
|
|
UpshiftSnrMgn before an upshift occurs.
|
|
In the case that RADSL is not present, the value will
|
|
be `0'."
|
|
::= { adslLineConfProfileEntry 9 }
|
|
adslAtucConfMinDownshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time that the current margin is below
|
|
DownshiftSnrMgn before a downshift occurs.
|
|
In the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { adslLineConfProfileEntry 10 }
|
|
|
|
adslAtucChanConfFastMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum Transmit rate for `Fast' channels,
|
|
in bps. See adslAtucConfRateChanRatio for information
|
|
regarding RADSL mode and ATUR transmit rate for
|
|
ATUC receive rates."
|
|
::= { adslLineConfProfileEntry 11 }
|
|
|
|
adslAtucChanConfInterleaveMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum Transmit rate for `Interleave'
|
|
channels, in bps. See adslAtucConfRateChanRatio for
|
|
information regarding RADSL mode and see
|
|
ATUR transmit rate for receive rates."
|
|
|
|
::= { adslLineConfProfileEntry 12 }
|
|
|
|
adslAtucChanConfFastMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Fast' channels,
|
|
in bps. See adslAtucConfRateChanRatio for information
|
|
regarding RADSL mode and see ATUR transmit rate for
|
|
ATUC receive rates."
|
|
::= { adslLineConfProfileEntry 13 }
|
|
|
|
adslAtucChanConfInterleaveMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Interleave'
|
|
channels, in bps. See adslAtucConfRateChanRatio for
|
|
information regarding RADSL mode and ATUR transmit
|
|
rate for ATUC receive rates."
|
|
::= { adslLineConfProfileEntry 14 }
|
|
|
|
adslAtucChanConfMaxInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured maximum Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the interleave channel
|
|
and defines the mapping (relative spacing) between
|
|
subsequent input bytes at the interleaver input and
|
|
their placement in the bit stream at the interleaver
|
|
output. Larger numbers provide greater separation
|
|
between consecutive input bytes in the output bit
|
|
stream allowing for improved impulse noise immunity
|
|
at the expense of payload latency."
|
|
::= { adslLineConfProfileEntry 15 }
|
|
|
|
adslAturConfRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fixed (1), -- no rate adaptation
|
|
adaptAtStartup (2), -- perform rate adaptation
|
|
|
|
-- only at initialization
|
|
adaptAtRuntime (3) -- perform rate adaptation at
|
|
-- any time
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines what form of transmit rate adaptation is
|
|
configured on this modem. See ADSL Forum TR-005 [3]
|
|
for more information."
|
|
::= { adslLineConfProfileEntry 16 }
|
|
|
|
adslAturConfRateChanRatio OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured allocation ratio of excess transmit
|
|
bandwidth between fast and interleaved channels. Only
|
|
applies when two channel mode and RADSL are supported.
|
|
Distribute bandwidth on each channel in excess of the
|
|
corresponding ChanConfMinTxRate so that:
|
|
adslAturConfRateChanRatio =
|
|
|
|
[Fast / (Fast + Interleaved)] * 100
|
|
|
|
In other words this value is the fast channel
|
|
percentage."
|
|
::= { adslLineConfProfileEntry 17 }
|
|
|
|
adslAturConfTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { adslLineConfProfileEntry 18 }
|
|
|
|
adslAturConfMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { adslLineConfProfileEntry 19 }
|
|
|
|
adslAturConfMinSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { adslLineConfProfileEntry 20 }
|
|
|
|
adslAturConfDownshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate downshift.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to decrease its transmit rate.
|
|
In the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { adslLineConfProfileEntry 21 }
|
|
|
|
adslAturConfUpshiftSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..310)
|
|
UNITS "tenth dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Signal/Noise Margin for rate upshift.
|
|
If the noise margin rises above this level, the modem
|
|
should attempt to increase its transmit rate.
|
|
In the case that RADSL is not present,
|
|
the value will be `0'."
|
|
::= { adslLineConfProfileEntry 22 }
|
|
|
|
adslAturConfMinUpshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16383)
|
|
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time that the current margin is above
|
|
UpshiftSnrMgn before an upshift occurs.
|
|
In the case that RADSL is not present, the value will
|
|
be `0'."
|
|
::= { adslLineConfProfileEntry 23 }
|
|
|
|
adslAturConfMinDownshiftTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time that the current margin is below
|
|
DownshiftSnrMgn before a downshift occurs.
|
|
In the case that RADSL mode is not present,
|
|
the value will be `0'."
|
|
::= { adslLineConfProfileEntry 24 }
|
|
|
|
adslAturChanConfFastMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum Transmit rate for `Fast' channels,
|
|
in bps. See adslAturConfRateChanRatio for information
|
|
regarding RADSL mode and ATUC transmit rate
|
|
for ATUR receive rates."
|
|
::= { adslLineConfProfileEntry 25 }
|
|
|
|
adslAturChanConfInterleaveMinTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Minimum Transmit rate for `Interleave'
|
|
channels, in bps. See adslAturConfRateChanRatio for
|
|
information regarding RADSL mode and ATUC transmit rate
|
|
for ATUR receive rates."
|
|
::= { adslLineConfProfileEntry 26 }
|
|
|
|
adslAturChanConfFastMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Fast' channels,
|
|
in bps. See adslAturConfRateChanRatio for information
|
|
regarding RADSL mode and ATUC transmit rate
|
|
for ATUR receive rates."
|
|
::= { adslLineConfProfileEntry 27 }
|
|
|
|
adslAturChanConfInterleaveMaxTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured Maximum Transmit rate for `Interleave'
|
|
channels, in bps. See adslAturConfRateChanRatio for
|
|
information regarding RADSL mode and see
|
|
ATUC transmit rate for ATUR receive rates."
|
|
::= { adslLineConfProfileEntry 28 }
|
|
|
|
adslAturChanConfMaxInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured maximum Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the interleave channel
|
|
and defines the mapping (relative spacing) between
|
|
subsequent input bytes at the interleaver input and
|
|
their placement in the bit stream at the interleaver
|
|
output. Larger numbers provide greater separation
|
|
between consecutive input bytes in the output bit
|
|
stream allowing for improved impulse noise immunity
|
|
at the expense of payload latency."
|
|
::= { adslLineConfProfileEntry 29 }
|
|
|
|
adslLineConfProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or
|
|
delete an existing row in this table.
|
|
|
|
A profile activated by setting this object to
|
|
`active'. When `active' is set, the system
|
|
will validate the profile.
|
|
|
|
Before a profile can be deleted or taken out of
|
|
service, (by setting this object to `destroy' or
|
|
`outOfService') it must be first unreferenced
|
|
from all associated lines.
|
|
|
|
If the implementator of this MIB has chosen not
|
|
to implement `dynamic assignment' of profiles, this
|
|
object's MIN-ACCESS is read-only and its value
|
|
is always to be `active'."
|
|
::= { adslLineConfProfileEntry 30 }
|
|
|
|
adslLineAlarmConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslLineAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information on the ADSL line
|
|
configuration. One entry in this table reflects a
|
|
profile defined by a manager which can be used to
|
|
configure the modem for a physical line"
|
|
::= { adslMibObjects 15}
|
|
|
|
adslLineAlarmConfProfileEntry OBJECT-TYPE
|
|
SYNTAX AdslLineAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents the configuration of an ADSL modem.
|
|
|
|
When `dynamic' profiles are implemented, a default
|
|
profile will always exist. This profile's name will
|
|
be set to `DEFVAL' and its parameters will be set to
|
|
vendor specific values, unless otherwise specified
|
|
in this document.
|
|
|
|
When `static' profiles are implemented, profiles
|
|
are automaticly created or destroyed as ADSL
|
|
physical lines are discovered and removed by
|
|
the system. The name of the profile will be
|
|
equivalent to the decimal value of the line's
|
|
interface index.
|
|
"
|
|
INDEX { IMPLIED adslLineAlarmConfProfileName}
|
|
|
|
::= { adslLineAlarmConfProfileTable 1}
|
|
|
|
AdslLineAlarmConfProfileEntry ::=
|
|
SEQUENCE {
|
|
adslLineAlarmConfProfileName SnmpAdminString,
|
|
adslAtucThresh15MinLofs INTEGER,
|
|
adslAtucThresh15MinLoss INTEGER,
|
|
adslAtucThresh15MinLols INTEGER,
|
|
adslAtucThresh15MinLprs INTEGER,
|
|
adslAtucThresh15MinESs INTEGER,
|
|
adslAtucThreshFastRateUp Unsigned32,
|
|
adslAtucThreshInterleaveRateUp Unsigned32,
|
|
adslAtucThreshFastRateDown Unsigned32,
|
|
adslAtucThreshInterleaveRateDown Unsigned32,
|
|
adslAtucInitFailureTrapEnable INTEGER,
|
|
adslAturThresh15MinLofs INTEGER,
|
|
adslAturThresh15MinLoss INTEGER,
|
|
adslAturThresh15MinLprs INTEGER,
|
|
adslAturThresh15MinESs INTEGER,
|
|
adslAturThreshFastRateUp Unsigned32,
|
|
adslAturThreshInterleaveRateUp Unsigned32,
|
|
adslAturThreshFastRateDown Unsigned32,
|
|
adslAturThreshInterleaveRateDown Unsigned32,
|
|
adslLineAlarmConfProfileRowStatus RowStatus
|
|
}
|
|
|
|
adslLineAlarmConfProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used by the line alarm configuration
|
|
table in order to identify a row of this table.
|
|
|
|
When `dynamic' profiles are implemented, the profile
|
|
name is user specified. Also, the system will always
|
|
provide a default profile whose name is `DEFVAL'.
|
|
|
|
When `static' profiles are implemented, there is an
|
|
one-to-one relationship between each line and its
|
|
profile. In which case, the profile name will
|
|
need to algorithmicly represent the Line's ifIndex.
|
|
Therefore, the profile's name is a decimalized string
|
|
of the ifIndex that is fixed-length (i.e., 10) with
|
|
leading zero(s). For example, the profile name for
|
|
ifIndex which equals '15' will be '0000000015'."
|
|
::= { adslLineAlarmConfProfileEntry 1}
|
|
|
|
adslAtucThresh15MinLofs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Frame Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAtucPerfLofsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 2}
|
|
|
|
adslAtucThresh15MinLoss OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Signal Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAtucPerfLossThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 3}
|
|
|
|
adslAtucThresh15MinLols OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Link Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAtucPerfLolsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 4}
|
|
|
|
adslAtucThresh15MinLprs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Power Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAtucPerfLprsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 5}
|
|
|
|
adslAtucThresh15MinESs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Errored Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAtucPerfESsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 6}
|
|
|
|
adslAtucThreshFastRateUp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Fast' channels only.
|
|
Configured change in rate causing an
|
|
adslAtucRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate >= ChanPrevTxRate plus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 7}
|
|
|
|
adslAtucThreshInterleaveRateUp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Interleave' channels only.
|
|
Configured change in rate causing an
|
|
|
|
adslAtucRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate >= ChanPrevTxRate plus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 8}
|
|
|
|
adslAtucThreshFastRateDown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Fast' channels only.
|
|
Configured change in rate causing an
|
|
adslAtucRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate <= ChanPrevTxRate minus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 9 }
|
|
|
|
adslAtucThreshInterleaveRateDown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Interleave' channels only.
|
|
Configured change in rate causing an
|
|
adslAtucRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate <= ChanPrevTxRate minus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 10 }
|
|
|
|
adslAtucInitFailureTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables and disables the InitFailureTrap. This
|
|
object is defaulted disable(2)."
|
|
DEFVAL { disable }
|
|
::= { adslLineAlarmConfProfileEntry 11 }
|
|
|
|
adslAturThresh15MinLofs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Frame Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAturPerfLofsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 12 }
|
|
|
|
adslAturThresh15MinLoss OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Signal Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAturPerfLossThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 13 }
|
|
|
|
adslAturThresh15MinLprs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loss of Power Seconds
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAturPerfLprsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 14 }
|
|
|
|
adslAturThresh15MinESs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Errored Seconds
|
|
|
|
encountered by an ADSL interface within any given 15
|
|
minutes performance data collection period, which
|
|
causes the SNMP agent to send an
|
|
adslAturPerfESsThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 15 }
|
|
|
|
adslAturThreshFastRateUp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Fast' channels only.
|
|
Configured change in rate causing an
|
|
adslAturRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate >= ChanPrevTxRate plus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 16 }
|
|
|
|
adslAturThreshInterleaveRateUp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Interleave' channels only.
|
|
configured change in rate causing an
|
|
adslAturRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate >= ChanPrevTxRate plus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 17 }
|
|
|
|
adslAturThreshFastRateDown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Fast' channels only.
|
|
Configured change in rate causing an
|
|
adslAturRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate <= ChanPrevTxRate minus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 18 }
|
|
|
|
adslAturThreshInterleaveRateDown OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Applies to `Interleave' channels only.
|
|
Configured change in rate causing an
|
|
adslAturRateChangeTrap. A trap is produced when:
|
|
ChanCurrTxRate <= ChanPrevTxRate minus the value of
|
|
this object. A value of `0' will disable the trap."
|
|
::= { adslLineAlarmConfProfileEntry 19 }
|
|
|
|
adslLineAlarmConfProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or
|
|
delete an existing row in this table.
|
|
|
|
A profile activated by setting this object to
|
|
`active'. When `active' is set, the system
|
|
will validate the profile.
|
|
|
|
Before a profile can be deleted or taken out of
|
|
service, (by setting this object to `destroy' or
|
|
`outOfService') it must be first unreferenced
|
|
from all associated lines.
|
|
|
|
If the implementator of this MIB has chosen not
|
|
to implement `dynamic assignment' of profiles, this
|
|
object's MIN-ACCESS is read-only and its value
|
|
is always to be `active'."
|
|
::= { adslLineAlarmConfProfileEntry 20 }
|
|
|
|
-- Line Code Specific Tables
|
|
|
|
-- These are place holders for the Line Code Specific MIBs
|
|
-- once they become available.
|
|
|
|
adslLCSMib OBJECT IDENTIFIER ::= { adslMibObjects 16 }
|
|
|
|
-- trap definitions
|
|
|
|
adslTraps OBJECT IDENTIFIER ::= { adslLineMib 2 }
|
|
|
|
adslAtucTraps OBJECT IDENTIFIER ::= { adslTraps 1 }
|
|
|
|
adslAtucPerfLofsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucPerfCurr15MinLofs,
|
|
adslAtucThresh15MinLofs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Framing 15-minute interval threshold reached."
|
|
::= { adslAtucTraps 0 1 }
|
|
|
|
adslAtucPerfLossThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucPerfCurr15MinLoss,
|
|
adslAtucThresh15MinLoss }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Signal 15-minute interval threshold reached."
|
|
::= { adslAtucTraps 0 2 }
|
|
|
|
adslAtucPerfLprsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucPerfCurr15MinLprs,
|
|
adslAtucThresh15MinLprs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Power 15-minute interval threshold reached."
|
|
::= { adslAtucTraps 0 3 }
|
|
|
|
adslAtucPerfESsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucPerfCurr15MinESs,
|
|
adslAtucThresh15MinESs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Errored Second 15-minute interval threshold reached."
|
|
::= { adslAtucTraps 0 4 }
|
|
|
|
adslAtucRateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanCurrTxRate,
|
|
adslAtucChanPrevTxRate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATUCs transmit rate has changed (RADSL mode only)"
|
|
::= { adslAtucTraps 0 5 }
|
|
|
|
adslAtucPerfLolsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucPerfCurr15MinLols,
|
|
adslAtucThresh15MinLols }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Link 15-minute interval threshold reached."
|
|
::= { adslAtucTraps 0 6 }
|
|
|
|
adslAtucInitFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucCurrStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATUC initialization failed. See adslAtucCurrStatus
|
|
for potential reasons."
|
|
::= { adslAtucTraps 0 7 }
|
|
|
|
adslAturTraps OBJECT IDENTIFIER ::= { adslTraps 2 }
|
|
|
|
adslAturPerfLofsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturPerfCurr15MinLofs,
|
|
adslAturThresh15MinLofs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Framing 15-minute interval threshold reached."
|
|
::= { adslAturTraps 0 1 }
|
|
|
|
adslAturPerfLossThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturPerfCurr15MinLoss,
|
|
adslAturThresh15MinLoss }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Signal 15-minute interval threshold reached."
|
|
::= { adslAturTraps 0 2 }
|
|
|
|
adslAturPerfLprsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturPerfCurr15MinLprs,
|
|
adslAturThresh15MinLprs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Power 15-minute interval threshold reached."
|
|
::= { adslAturTraps 0 3 }
|
|
|
|
adslAturPerfESsThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturPerfCurr15MinESs,
|
|
adslAturThresh15MinESs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Errored Second 15-minute interval threshold reached."
|
|
::= { adslAturTraps 0 4 }
|
|
|
|
adslAturRateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturChanCurrTxRate,
|
|
adslAturChanPrevTxRate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATURs transmit rate has changed (RADSL mode only)"
|
|
|
|
::= { adslAturTraps 0 5 }
|
|
|
|
-- no adslAturPerfLolsThreshTrap possible { 0 6 }
|
|
|
|
-- no adslAturInitFailureTrap possible { 0 7 }
|
|
|
|
-- conformance information
|
|
|
|
adslConformance OBJECT IDENTIFIER ::= { adslLineMib 3 }
|
|
|
|
adslGroups OBJECT IDENTIFIER ::= { adslConformance 1 }
|
|
adslCompliances OBJECT IDENTIFIER ::= { adslConformance 2 }
|
|
|
|
-- ATU-C agent compliance statements
|
|
|
|
adslLineMibAtucCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities
|
|
which manage ADSL ATU-C interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS
|
|
{
|
|
adslLineGroup, adslPhysicalGroup, adslChannelGroup,
|
|
adslAtucPhysPerfIntervalGroup,
|
|
adslAturPhysPerfIntervalGroup, adslLineConfProfileGroup,
|
|
adslLineAlarmConfProfileGroup,
|
|
adslLineConfProfileControlGroup
|
|
}
|
|
|
|
GROUP adslAtucPhysPerfRawCounterGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require continuous ATU-C physical event counters
|
|
should implement this group."
|
|
|
|
GROUP adslAturPhysPerfRawCounterGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require continuous ATU-R physical event counters
|
|
should implement this group."
|
|
|
|
GROUP adslAtucChanPerformanceGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require ATU-C channel block event counters should
|
|
implement this group."
|
|
|
|
GROUP adslAturChanPerformanceGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require ATU-R channel block event counters should
|
|
implement this group."
|
|
|
|
OBJECT adslLineConfProfile
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable when static
|
|
profiles are implemented."
|
|
|
|
OBJECT adslAtucConfRateMode
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfRateChanRatio
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfTargetSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfMaxSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfMinSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfDownshiftSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfUpshiftSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfMinUpshiftTime
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucConfMinDownshiftTime
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucChanConfFastMinTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucChanConfInterleaveMinTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucChanConfFastMaxTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucChanConfInterleaveMaxTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucChanConfMaxInterleaveDelay
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfRateMode
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfRateChanRatio
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfTargetSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfMaxSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfMinSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfDownshiftSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfUpshiftSnrMgn
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfMinUpshiftTime
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturConfMinDownshiftTime
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturChanConfFastMinTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturChanConfInterleaveMinTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturChanConfFastMaxTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturChanConfInterleaveMaxTxRate
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturChanConfMaxInterleaveDelay
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslLineConfProfileRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable only when static
|
|
profiles are implemented."
|
|
|
|
OBJECT adslLineAlarmConfProfile
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable only when static
|
|
profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLofs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLoss
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLols
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLprs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinESs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshFastRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshInterleaveRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshFastRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshInterleaveRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucInitFailureTrapEnable
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLofs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLoss
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLprs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinESs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshFastRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshInterleaveRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshFastRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshInterleaveRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslLineAlarmConfProfileRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable only when static
|
|
profiles are implemented."
|
|
|
|
::= { adslCompliances 1 }
|
|
|
|
-- ATU-R agent compliance statements
|
|
|
|
adslLineMibAturCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities
|
|
which manage ADSL ATU-R interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS
|
|
{
|
|
adslAturLineGroup, adslAturPhysicalGroup,
|
|
adslAturChannelGroup,
|
|
adslAturAtucPhysPerfIntervalGroup,
|
|
adslAturAturPhysPerfIntervalGroup,
|
|
adslAturLineAlarmConfProfileGroup,
|
|
adslAturLineConfProfileControlGroup
|
|
}
|
|
|
|
GROUP adslAturAtucPhysPerfRawCounterGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require continuous ATU-C physical event counters
|
|
should implement this group."
|
|
|
|
GROUP adslAturAturPhysPerfRawCounterGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
|
|
require continuous ATU-R physical event counters
|
|
should implement this group."
|
|
|
|
GROUP adslAturAtucChanPerformanceGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require ATU-C channel block event counters should
|
|
implement this group."
|
|
|
|
GROUP adslAturAturChanPerformanceGroup
|
|
DESCRIPTION
|
|
"This group is optional. Implementations which
|
|
require ATU-R channel block event counters should
|
|
implement this group."
|
|
|
|
OBJECT adslLineAlarmConfProfile
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable only when static
|
|
profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLofs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinLoss
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThresh15MinESs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshFastRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshInterleaveRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucThreshFastRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAtucInitFailureTrapEnable
|
|
MIN-ACCESS read-write
|
|
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLofs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLoss
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinLprs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThresh15MinESs
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshFastRateUp
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshInterleaveRateUp
|
|
MIN-ACCESS read-write
|
|
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshFastRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslAturThreshInterleaveRateDown
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION
|
|
"Read-write access is applicable when
|
|
static profiles are implemented."
|
|
|
|
OBJECT adslLineAlarmConfProfileRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Read-only access is applicable only when static
|
|
profiles are implemented."
|
|
|
|
OBJECT adslAtucCurrStatus
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
lossOfFraming(1),
|
|
lossOfSignal(2)
|
|
}
|
|
DESCRIPTION
|
|
"It is allowable to implement only noDefect(0),
|
|
lossOfFraming(1) and lossOfSignal(2) by the ATU-R
|
|
agent."
|
|
|
|
::= { adslCompliances 2 }
|
|
|
|
-- units of conformance
|
|
adslLineGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslLineCoding, adslLineType, adslLineSpecific
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information about an ADSL Line."
|
|
::= { adslGroups 1 }
|
|
|
|
adslPhysicalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
|
|
adslAtucInvSerialNumber, adslAtucInvVendorID,
|
|
adslAtucInvVersionNumber, adslAtucCurrSnrMgn,
|
|
adslAtucCurrAtn, adslAtucCurrStatus,
|
|
adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
|
|
adslAturInvSerialNumber, adslAturInvVendorID,
|
|
adslAturInvVersionNumber, adslAturCurrSnrMgn,
|
|
adslAturCurrAtn, adslAturCurrStatus,
|
|
adslAturCurrOutputPwr, adslAturCurrAttainableRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing physical
|
|
configuration information of the ADSL Line."
|
|
::= { adslGroups 2 }
|
|
|
|
adslChannelGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
|
|
adslAtucChanPrevTxRate, adslAtucChanCrcBlockLength,
|
|
adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
|
|
adslAturChanPrevTxRate, adslAturChanCrcBlockLength
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information about an ADSL channel."
|
|
::= { adslGroups 3 }
|
|
|
|
adslAtucPhysPerfRawCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucPerfLofs, adslAtucPerfLoss,
|
|
adslAtucPerfLols, adslAtucPerfLprs,
|
|
adslAtucPerfESs, adslAtucPerfInits
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing raw performance
|
|
counts on an ADSL Line (ATU-C end)."
|
|
::= { adslGroups 4 }
|
|
|
|
adslAtucPhysPerfIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucPerfValidIntervals,
|
|
adslAtucPerfInvalidIntervals,
|
|
adslAtucPerfCurr15MinTimeElapsed,
|
|
adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
|
|
adslAtucPerfCurr15MinLols, adslAtucPerfCurr15MinLprs,
|
|
adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
|
|
|
|
adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
|
|
adslAtucPerfCurr1DayLols, adslAtucPerfCurr1DayLprs,
|
|
adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
|
|
adslAtucPerfPrev1DayMoniSecs,
|
|
adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
|
|
adslAtucPerfPrev1DayLols, adslAtucPerfPrev1DayLprs,
|
|
adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
|
|
adslAtucIntervalLofs, adslAtucIntervalLoss,
|
|
adslAtucIntervalLols, adslAtucIntervalLprs,
|
|
adslAtucIntervalESs, adslAtucIntervalInits,
|
|
adslAtucIntervalValidData
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing current 15-minute,
|
|
1-day; and previous 1-day performance counts on
|
|
ADSL Line (ATU-C end) ."
|
|
::= { adslGroups 5 }
|
|
|
|
adslAturPhysPerfRawCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturPerfLofs, adslAturPerfLoss,
|
|
adslAturPerfLprs, adslAturPerfESs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing raw performance
|
|
counts on an ADSL Line (ATU-R end)."
|
|
::= { adslGroups 6 }
|
|
|
|
adslAturPhysPerfIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturPerfValidIntervals,
|
|
adslAturPerfInvalidIntervals,
|
|
adslAturPerfCurr15MinTimeElapsed,
|
|
adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
|
|
adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
|
|
adslAturPerfCurr1DayTimeElapsed,
|
|
adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
|
|
adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
|
|
adslAturPerfPrev1DayMoniSecs,
|
|
adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
|
|
adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
|
|
adslAturIntervalLofs,
|
|
adslAturIntervalLoss, adslAturIntervalLprs,
|
|
adslAturIntervalESs, adslAturIntervalValidData
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing current 15-minute,
|
|
1-day; and previous 1-day performance counts on
|
|
ADSL Line (ATU-R end)."
|
|
::= { adslGroups 7 }
|
|
|
|
adslAtucChanPerformanceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucChanReceivedBlks,
|
|
adslAtucChanTransmittedBlks,
|
|
adslAtucChanCorrectedBlks,
|
|
adslAtucChanUncorrectBlks,
|
|
adslAtucChanPerfValidIntervals,
|
|
adslAtucChanPerfInvalidIntervals,
|
|
adslAtucChanPerfCurr15MinTimeElapsed,
|
|
adslAtucChanPerfCurr15MinReceivedBlks,
|
|
adslAtucChanPerfCurr15MinTransmittedBlks,
|
|
adslAtucChanPerfCurr15MinCorrectedBlks,
|
|
adslAtucChanPerfCurr15MinUncorrectBlks,
|
|
adslAtucChanPerfCurr1DayTimeElapsed,
|
|
adslAtucChanPerfCurr1DayReceivedBlks,
|
|
adslAtucChanPerfCurr1DayTransmittedBlks,
|
|
adslAtucChanPerfCurr1DayCorrectedBlks,
|
|
adslAtucChanPerfCurr1DayUncorrectBlks,
|
|
adslAtucChanPerfPrev1DayMoniSecs,
|
|
adslAtucChanPerfPrev1DayReceivedBlks,
|
|
adslAtucChanPerfPrev1DayTransmittedBlks,
|
|
adslAtucChanPerfPrev1DayCorrectedBlks,
|
|
adslAtucChanPerfPrev1DayUncorrectBlks,
|
|
adslAtucChanIntervalReceivedBlks,
|
|
adslAtucChanIntervalTransmittedBlks,
|
|
adslAtucChanIntervalCorrectedBlks,
|
|
adslAtucChanIntervalUncorrectBlks,
|
|
adslAtucChanIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing channel block
|
|
performance information on an ADSL channel
|
|
(ATU-C end)."
|
|
::= { adslGroups 8 }
|
|
|
|
adslAturChanPerformanceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturChanReceivedBlks,
|
|
adslAturChanTransmittedBlks,
|
|
adslAturChanCorrectedBlks,
|
|
|
|
adslAturChanUncorrectBlks,
|
|
adslAturChanPerfValidIntervals,
|
|
adslAturChanPerfInvalidIntervals,
|
|
adslAturChanPerfCurr15MinTimeElapsed,
|
|
adslAturChanPerfCurr15MinReceivedBlks,
|
|
adslAturChanPerfCurr15MinTransmittedBlks,
|
|
adslAturChanPerfCurr15MinCorrectedBlks,
|
|
adslAturChanPerfCurr15MinUncorrectBlks,
|
|
adslAturChanPerfCurr1DayTimeElapsed,
|
|
adslAturChanPerfCurr1DayReceivedBlks,
|
|
adslAturChanPerfCurr1DayTransmittedBlks,
|
|
adslAturChanPerfCurr1DayCorrectedBlks,
|
|
adslAturChanPerfCurr1DayUncorrectBlks,
|
|
adslAturChanPerfPrev1DayMoniSecs,
|
|
adslAturChanPerfPrev1DayReceivedBlks,
|
|
adslAturChanPerfPrev1DayTransmittedBlks,
|
|
adslAturChanPerfPrev1DayCorrectedBlks,
|
|
adslAturChanPerfPrev1DayUncorrectBlks,
|
|
adslAturChanIntervalReceivedBlks,
|
|
adslAturChanIntervalTransmittedBlks,
|
|
adslAturChanIntervalCorrectedBlks,
|
|
adslAturChanIntervalUncorrectBlks,
|
|
adslAturChanIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing channel block
|
|
performance information on an ADSL channel
|
|
(ATU-C end)."
|
|
::= { adslGroups 9 }
|
|
|
|
adslLineConfProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucConfRateMode, adslAtucConfRateChanRatio,
|
|
adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn,
|
|
adslAtucConfMinSnrMgn,
|
|
adslAtucConfDownshiftSnrMgn,
|
|
adslAtucConfUpshiftSnrMgn,
|
|
adslAtucConfMinUpshiftTime,
|
|
adslAtucConfMinDownshiftTime,
|
|
adslAtucChanConfFastMinTxRate,
|
|
adslAtucChanConfInterleaveMinTxRate,
|
|
adslAtucChanConfFastMaxTxRate,
|
|
adslAtucChanConfInterleaveMaxTxRate,
|
|
adslAtucChanConfMaxInterleaveDelay,
|
|
adslAturConfRateMode, adslAturConfRateChanRatio,
|
|
adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn,
|
|
adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn,
|
|
|
|
adslAturConfUpshiftSnrMgn,
|
|
adslAturConfMinUpshiftTime,
|
|
adslAturConfMinDownshiftTime,
|
|
adslAturChanConfFastMinTxRate,
|
|
adslAturChanConfInterleaveMinTxRate,
|
|
adslAturChanConfFastMaxTxRate,
|
|
adslAturChanConfInterleaveMaxTxRate,
|
|
adslAturChanConfMaxInterleaveDelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing provisioning
|
|
information about an ADSL Line."
|
|
::= { adslGroups 10 }
|
|
|
|
adslLineAlarmConfProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
|
|
adslAtucThresh15MinLols, adslAtucThresh15MinLprs,
|
|
adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
|
|
adslAtucThreshInterleaveRateUp,
|
|
adslAtucThreshFastRateDown,
|
|
adslAtucThreshInterleaveRateDown,
|
|
adslAtucInitFailureTrapEnable,
|
|
adslAturThresh15MinLofs, adslAturThresh15MinLoss,
|
|
adslAturThresh15MinLprs, adslAturThresh15MinESs,
|
|
adslAturThreshFastRateUp,
|
|
adslAturThreshInterleaveRateUp,
|
|
adslAturThreshFastRateDown,
|
|
adslAturThreshInterleaveRateDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing alarm provisioning
|
|
information about an ADSL Line."
|
|
::= { adslGroups 11 }
|
|
|
|
adslLineConfProfileControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslLineConfProfile, adslLineAlarmConfProfile,
|
|
adslLineConfProfileRowStatus,
|
|
adslLineAlarmConfProfileRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing profile
|
|
control for the ADSL system."
|
|
::= { adslGroups 12 }
|
|
|
|
adslNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
adslAtucPerfLofsThreshTrap,
|
|
adslAtucPerfLossThreshTrap,
|
|
adslAtucPerfLprsThreshTrap,
|
|
adslAtucPerfESsThreshTrap,
|
|
adslAtucRateChangeTrap,
|
|
adslAtucPerfLolsThreshTrap,
|
|
adslAtucInitFailureTrap,
|
|
adslAturPerfLofsThreshTrap,
|
|
adslAturPerfLossThreshTrap,
|
|
adslAturPerfLprsThreshTrap,
|
|
adslAturPerfESsThreshTrap,
|
|
adslAturRateChangeTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of adsl notifications."
|
|
::= { adslGroups 13 }
|
|
|
|
-- units of conformance for ATU-R agent
|
|
|
|
adslAturLineGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslLineCoding
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information about an ADSL Line on the ATU-R side."
|
|
::= { adslGroups 14 }
|
|
|
|
adslAturPhysicalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucInvVendorID,
|
|
adslAtucInvVersionNumber,
|
|
adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
|
|
adslAturInvSerialNumber, adslAturInvVendorID,
|
|
adslAturInvVersionNumber, adslAturCurrSnrMgn,
|
|
adslAturCurrAtn, adslAturCurrStatus,
|
|
adslAturCurrOutputPwr, adslAturCurrAttainableRate,
|
|
adslAtucCurrStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing physical
|
|
configuration information of the ADSL Line on the
|
|
ATU-R side."
|
|
|
|
::= { adslGroups 15 }
|
|
|
|
adslAturChannelGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
|
|
adslAtucChanPrevTxRate,
|
|
adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
|
|
adslAturChanPrevTxRate, adslAturChanCrcBlockLength
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information about an ADSL channel on the ATU-R
|
|
side."
|
|
::= { adslGroups 16 }
|
|
|
|
adslAturAtucPhysPerfRawCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucPerfLofs, adslAtucPerfLoss,
|
|
adslAtucPerfESs, adslAtucPerfInits
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing raw performance
|
|
counts on an ADSL Line (ATU-C end) provided by the
|
|
ATU-R agent."
|
|
::= { adslGroups 17 }
|
|
|
|
adslAturAtucPhysPerfIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucPerfValidIntervals,
|
|
adslAtucPerfInvalidIntervals,
|
|
adslAtucPerfCurr15MinTimeElapsed,
|
|
adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
|
|
adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
|
|
adslAtucPerfCurr1DayTimeElapsed,
|
|
adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
|
|
adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
|
|
adslAtucPerfPrev1DayMoniSecs,
|
|
adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
|
|
adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
|
|
adslAtucIntervalLofs, adslAtucIntervalLoss,
|
|
adslAtucIntervalESs, adslAtucIntervalInits,
|
|
adslAtucIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing current
|
|
|
|
15-minute, 1-day; and previous 1-day performance
|
|
counts on ADSL Line (ATU-C end) provided by the
|
|
ATU-R agent."
|
|
::= { adslGroups 18 }
|
|
|
|
adslAturAturPhysPerfRawCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturPerfLofs, adslAturPerfLoss,
|
|
adslAturPerfLprs, adslAturPerfESs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing raw performance
|
|
counts on an ADSL Line (ATU-R end) provided by the
|
|
ATU-R agent."
|
|
::= { adslGroups 19 }
|
|
|
|
adslAturAturPhysPerfIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturPerfValidIntervals,
|
|
adslAturPerfInvalidIntervals,
|
|
adslAturPerfCurr15MinTimeElapsed,
|
|
adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
|
|
adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
|
|
adslAturPerfCurr1DayTimeElapsed,
|
|
adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
|
|
adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
|
|
adslAturPerfPrev1DayMoniSecs,
|
|
adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
|
|
adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
|
|
adslAturIntervalLofs,
|
|
adslAturIntervalLoss, adslAturIntervalLprs,
|
|
adslAturIntervalESs, adslAturIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing current
|
|
15-minute, 1-day; and previous 1-day performance
|
|
counts on ADSL Line (ATU-R end) provided by the
|
|
ATU-R agent."
|
|
::= { adslGroups 20 }
|
|
|
|
adslAturAtucChanPerformanceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucChanReceivedBlks,
|
|
adslAtucChanTransmittedBlks,
|
|
adslAtucChanCorrectedBlks,
|
|
adslAtucChanUncorrectBlks,
|
|
|
|
adslAtucChanPerfCurr15MinTimeElapsed,
|
|
adslAtucChanPerfCurr15MinReceivedBlks,
|
|
adslAtucChanPerfCurr15MinTransmittedBlks,
|
|
adslAtucChanPerfCurr15MinCorrectedBlks,
|
|
adslAtucChanPerfCurr15MinUncorrectBlks,
|
|
adslAtucChanPerfCurr1DayTimeElapsed,
|
|
adslAtucChanPerfCurr1DayReceivedBlks,
|
|
adslAtucChanPerfCurr1DayTransmittedBlks,
|
|
adslAtucChanPerfCurr1DayCorrectedBlks,
|
|
adslAtucChanPerfCurr1DayUncorrectBlks,
|
|
adslAtucChanPerfPrev1DayMoniSecs,
|
|
adslAtucChanPerfPrev1DayReceivedBlks,
|
|
adslAtucChanPerfPrev1DayTransmittedBlks,
|
|
adslAtucChanPerfPrev1DayCorrectedBlks,
|
|
adslAtucChanPerfPrev1DayUncorrectBlks,
|
|
adslAtucChanPerfValidIntervals,
|
|
adslAtucChanPerfInvalidIntervals,
|
|
adslAtucChanIntervalReceivedBlks,
|
|
adslAtucChanIntervalTransmittedBlks,
|
|
adslAtucChanIntervalCorrectedBlks,
|
|
adslAtucChanIntervalUncorrectBlks,
|
|
adslAtucChanIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing channel block
|
|
performance information on an ADSL channel
|
|
(ATU-C end) provided by the ATU-R agent."
|
|
::= { adslGroups 21 }
|
|
|
|
adslAturAturChanPerformanceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAturChanReceivedBlks,
|
|
adslAturChanTransmittedBlks,
|
|
adslAturChanCorrectedBlks,
|
|
adslAturChanUncorrectBlks,
|
|
adslAturChanPerfValidIntervals,
|
|
adslAturChanPerfInvalidIntervals,
|
|
adslAturChanPerfCurr15MinTimeElapsed,
|
|
adslAturChanPerfCurr15MinReceivedBlks,
|
|
adslAturChanPerfCurr15MinTransmittedBlks,
|
|
adslAturChanPerfCurr15MinCorrectedBlks,
|
|
adslAturChanPerfCurr15MinUncorrectBlks,
|
|
adslAturChanPerfCurr1DayTimeElapsed,
|
|
adslAturChanPerfCurr1DayReceivedBlks,
|
|
adslAturChanPerfCurr1DayTransmittedBlks,
|
|
adslAturChanPerfCurr1DayCorrectedBlks,
|
|
adslAturChanPerfCurr1DayUncorrectBlks,
|
|
|
|
adslAturChanPerfPrev1DayMoniSecs,
|
|
adslAturChanPerfPrev1DayReceivedBlks,
|
|
adslAturChanPerfPrev1DayTransmittedBlks,
|
|
adslAturChanPerfPrev1DayCorrectedBlks,
|
|
adslAturChanPerfPrev1DayUncorrectBlks,
|
|
adslAturChanIntervalReceivedBlks,
|
|
adslAturChanIntervalTransmittedBlks,
|
|
adslAturChanIntervalCorrectedBlks,
|
|
adslAturChanIntervalUncorrectBlks,
|
|
adslAturChanIntervalValidData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing channel block
|
|
performance information on an ADSL channel
|
|
(ATU-R end) provided by the ATU-R agent."
|
|
::= { adslGroups 22 }
|
|
|
|
adslAturLineAlarmConfProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
|
|
adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
|
|
adslAtucThreshInterleaveRateUp,
|
|
adslAtucThreshFastRateDown,
|
|
adslAtucThreshInterleaveRateDown,
|
|
adslAtucInitFailureTrapEnable,
|
|
adslAturThresh15MinLofs, adslAturThresh15MinLoss,
|
|
adslAturThresh15MinLprs, adslAturThresh15MinESs,
|
|
adslAturThreshFastRateUp,
|
|
adslAturThreshInterleaveRateUp,
|
|
adslAturThreshFastRateDown,
|
|
adslAturThreshInterleaveRateDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing alarm
|
|
provisioning
|
|
information about an ADSL Line provided by the
|
|
ATU-R agent."
|
|
::= { adslGroups 23 }
|
|
|
|
adslAturLineConfProfileControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
adslLineAlarmConfProfile,
|
|
adslLineAlarmConfProfileRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"A collection of objects providing profile
|
|
control for the ADSL system by the ATU-R agent."
|
|
::= { adslGroups 24 }
|
|
|
|
adslAturNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
adslAtucPerfLofsThreshTrap,
|
|
adslAtucPerfLossThreshTrap,
|
|
adslAtucPerfESsThreshTrap,
|
|
adslAtucRateChangeTrap,
|
|
adslAturPerfLofsThreshTrap,
|
|
adslAturPerfLossThreshTrap,
|
|
adslAturPerfLprsThreshTrap,
|
|
adslAturPerfESsThreshTrap,
|
|
adslAturRateChangeTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of ADSL notifications implemented by
|
|
the ATU-R agent."
|
|
::= { adslGroups 25 }
|
|
|
|
END
|