3644 lines
121 KiB
Plaintext
3644 lines
121 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2008, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-CFM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32, Counter32, Counter64, Gauge32
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DateAndTime, RowStatus, DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdCfm MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201112210100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
4878 Levy, suite 202
|
|
Saint-Laurent, Quebec Canada H4R 2P1
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It
|
|
covers the delay measurment and the packet loss configuration
|
|
and results."
|
|
|
|
REVISION "201112210100Z" -- 21 Dec 2011
|
|
DESCRIPTION
|
|
"Add support for ETH-SLM Tx/Rx PDU counters."
|
|
|
|
|
|
REVISION "201112200100Z" -- 20 Dec 2011
|
|
DESCRIPTION
|
|
"Add support for ETH-CSF Tx/Rx PDU counters."
|
|
|
|
|
|
REVISION "201109210100Z" -- 21 Sept 2011
|
|
DESCRIPTION
|
|
"Add support for CFM Stack Table."
|
|
|
|
REVISION "201103300100Z" -- 30 Mars 2011
|
|
DESCRIPTION
|
|
"Add support for Instantaneous values."
|
|
|
|
REVISION "200911010100Z" -- 1 Nov 2009
|
|
DESCRIPTION
|
|
"Add support for extended packet loss ratio."
|
|
|
|
REVISION "200902230100Z" -- 23 Feb 2009
|
|
DESCRIPTION
|
|
"Add support for extended packet loss ratio."
|
|
|
|
REVISION "200805010100Z" -- 1 May 2008
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-CFM-MIB."
|
|
|
|
::= { acdMibs 7 }
|
|
|
|
acdCfmNotifications OBJECT IDENTIFIER ::= { acdCfm 0 }
|
|
acdCfmMIBObjects OBJECT IDENTIFIER ::= { acdCfm 1 }
|
|
acdCfmConformance OBJECT IDENTIFIER ::= { acdCfm 2 }
|
|
|
|
acdCfmDelayMeasurement OBJECT IDENTIFIER ::= { acdCfmMIBObjects 1 }
|
|
acdCfmPacketLoss OBJECT IDENTIFIER ::= { acdCfmMIBObjects 2 }
|
|
acdCfmMep OBJECT IDENTIFIER ::= { acdCfmMIBObjects 3 }
|
|
acdCfmStack OBJECT IDENTIFIER ::= { acdCfmMIBObjects 4 }
|
|
acdCfmSlm OBJECT IDENTIFIER ::= { acdCfmMIBObjects 5 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Delay Measurement configuration table
|
|
-- This table contains all Delay Measurement entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmDmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmDmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 1 }
|
|
|
|
acdCfmDmCfgEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmDmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings to manage a DM instance."
|
|
INDEX { acdCfmDmCfgID }
|
|
::= { acdCfmDmCfgTable 1 }
|
|
|
|
AcdCfmDmCfgEntry ::= SEQUENCE {
|
|
acdCfmDmCfgID Unsigned32,
|
|
acdCfmDmCfgRowStatus RowStatus,
|
|
acdCfmDmCfgMepIdx Unsigned32,
|
|
acdCfmDmCfgRemoteMepId Unsigned32,
|
|
acdCfmDmCfgPriority Unsigned32,
|
|
acdCfmDmCfgEnable TruthValue,
|
|
acdCfmDmCfgInterval Unsigned32,
|
|
acdCfmDmCfgRefPeriod Unsigned32,
|
|
acdCfmDmCfgOneWayDelayEnable TruthValue,
|
|
acdCfmDmCfgOneWayDelayMax Unsigned32,
|
|
acdCfmDmCfgOneWayDelayThresh Unsigned32,
|
|
acdCfmDmCfgOneWayAvgDelayThresh Unsigned32,
|
|
acdCfmDmCfgOneWayDvEnable TruthValue,
|
|
acdCfmDmCfgOneWayDvMax Unsigned32,
|
|
acdCfmDmCfgOneWayDvThresh Unsigned32,
|
|
acdCfmDmCfgOneWayAvgDvThresh Unsigned32,
|
|
acdCfmDmCfgTwoWayDelayEnable TruthValue,
|
|
acdCfmDmCfgTwoWayDelayMax Unsigned32,
|
|
acdCfmDmCfgTwoWayDelayThresh Unsigned32,
|
|
acdCfmDmCfgTwoWayAvgDelayThresh Unsigned32,
|
|
acdCfmDmCfgTwoWayDvEnable TruthValue,
|
|
acdCfmDmCfgTwoWayDvMax Unsigned32,
|
|
acdCfmDmCfgTwoWayDvThresh Unsigned32,
|
|
acdCfmDmCfgTwoWayAvgDvThresh Unsigned32
|
|
}
|
|
|
|
acdCfmDmCfgID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the results table."
|
|
::= { acdCfmDmCfgEntry 1 }
|
|
|
|
acdCfmDmCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated."
|
|
::= { acdCfmDmCfgEntry 2 }
|
|
|
|
acdCfmDmCfgMepIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier."
|
|
::= { acdCfmDmCfgEntry 3 }
|
|
|
|
acdCfmDmCfgRemoteMepId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Maintenance association End Point Identifier used for this
|
|
delay measurement configuration."
|
|
::= { acdCfmDmCfgEntry 4 }
|
|
|
|
acdCfmDmCfgPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN priority. Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdCfmDmCfgEntry 5 }
|
|
|
|
acdCfmDmCfgEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to issues DMM measurement packets."
|
|
DEFVAL { false }
|
|
::= { acdCfmDmCfgEntry 6 }
|
|
|
|
acdCfmDmCfgInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..60000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in milliseconds at which CFM issues DMM measurement packets."
|
|
DEFVAL { 10000 }
|
|
::= { acdCfmDmCfgEntry 7 }
|
|
|
|
acdCfmDmCfgRefPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference period in minutes for Delay Measurement."
|
|
DEFVAL { 15 }
|
|
::= { acdCfmDmCfgEntry 8 }
|
|
|
|
acdCfmDmCfgOneWayDelayEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to compute one-way delay measurements."
|
|
DEFVAL { true }
|
|
::= { acdCfmDmCfgEntry 9 }
|
|
|
|
acdCfmDmCfgOneWayDelayMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum allowed instantaneous delay in milliseconds."
|
|
DEFVAL { 50 }
|
|
::= { acdCfmDmCfgEntry 10 }
|
|
|
|
acdCfmDmCfgOneWayDelayThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive delay greater than the maximum allowed value
|
|
before alert."
|
|
DEFVAL { 4 }
|
|
::= { acdCfmDmCfgEntry 11 }
|
|
|
|
acdCfmDmCfgOneWayAvgDelayThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One-way average delay threshold in milliseconds."
|
|
DEFVAL { 50 }
|
|
::= { acdCfmDmCfgEntry 12 }
|
|
|
|
acdCfmDmCfgOneWayDvEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to compute one-way delay variation measurements."
|
|
DEFVAL { true }
|
|
::= { acdCfmDmCfgEntry 13 }
|
|
|
|
acdCfmDmCfgOneWayDvMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum allowed instantaneous delay variation in milliseconds."
|
|
DEFVAL { 50 }
|
|
::= { acdCfmDmCfgEntry 14 }
|
|
|
|
acdCfmDmCfgOneWayDvThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive delay variation greater than the maximum
|
|
allowed value before alert."
|
|
DEFVAL { 10 }
|
|
::= { acdCfmDmCfgEntry 15 }
|
|
|
|
acdCfmDmCfgOneWayAvgDvThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One-way average delay variation threshold in milliseconds."
|
|
DEFVAL { 4 }
|
|
::= { acdCfmDmCfgEntry 16 }
|
|
|
|
acdCfmDmCfgTwoWayDelayEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to compute Two-way delay measurements."
|
|
DEFVAL { true }
|
|
::= { acdCfmDmCfgEntry 17 }
|
|
|
|
acdCfmDmCfgTwoWayDelayMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum allowed instantaneous delay in milliseconds."
|
|
DEFVAL { 100 }
|
|
::= { acdCfmDmCfgEntry 18 }
|
|
|
|
acdCfmDmCfgTwoWayDelayThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive delay greater than the maximum allowed value
|
|
before alert."
|
|
DEFVAL { 40 }
|
|
::= { acdCfmDmCfgEntry 19 }
|
|
|
|
acdCfmDmCfgTwoWayAvgDelayThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two-way average delay threshold in milliseconds."
|
|
DEFVAL { 100 }
|
|
::= { acdCfmDmCfgEntry 20 }
|
|
|
|
acdCfmDmCfgTwoWayDvEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to compute Two-way delay variation measurements."
|
|
DEFVAL { true }
|
|
::= { acdCfmDmCfgEntry 21 }
|
|
|
|
acdCfmDmCfgTwoWayDvMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum allowed instantaneous delay variation in milliseconds."
|
|
DEFVAL { 10 }
|
|
::= { acdCfmDmCfgEntry 22 }
|
|
|
|
acdCfmDmCfgTwoWayDvThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive delay variation greater than the maximum
|
|
allowed value before alert."
|
|
DEFVAL { 4 }
|
|
::= { acdCfmDmCfgEntry 23 }
|
|
|
|
acdCfmDmCfgTwoWayAvgDvThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two-way average delay variation threshold in milliseconds."
|
|
DEFVAL { 10 }
|
|
::= { acdCfmDmCfgEntry 24 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM One Way delay Results table
|
|
-- This table contains all CFM DMM One Way delay entry results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmResultOneWayDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmResultOneWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One way delay result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 2 }
|
|
|
|
acdCfmResultOneWayDelayEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmResultOneWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of One Way Delay results for a DM entry."
|
|
INDEX { acdCfmResultOneWayDelayID }
|
|
::= { acdCfmResultOneWayDelayTable 1 }
|
|
|
|
AcdCfmResultOneWayDelayEntry ::= SEQUENCE {
|
|
acdCfmResultOneWayDelayID Unsigned32,
|
|
acdCfmResultOneWayDelayPeriodIndex Unsigned32,
|
|
acdCfmResultOneWayDelayIntervalStart DateAndTime,
|
|
acdCfmResultOneWayDelayValid TruthValue,
|
|
acdCfmResultOneWayDelayAlert TruthValue,
|
|
acdCfmResultOneWayDelayAvgAlert TruthValue,
|
|
acdCfmResultOneWayDelaySamples Unsigned32,
|
|
acdCfmResultOneWayDelayMinValue Integer32,
|
|
acdCfmResultOneWayDelayMaxValue Integer32,
|
|
acdCfmResultOneWayDelayAvgValue Integer32,
|
|
acdCfmResultOneWayDelayThreshExc Unsigned32,
|
|
acdCfmResultOneWayDelayInstValue Integer32
|
|
}
|
|
|
|
acdCfmResultOneWayDelayID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the Dm table."
|
|
::= { acdCfmResultOneWayDelayEntry 1 }
|
|
|
|
acdCfmResultOneWayDelayPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmResultOneWayDelayEntry 2 }
|
|
|
|
acdCfmResultOneWayDelayIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmResultOneWayDelayEntry 3 }
|
|
|
|
acdCfmResultOneWayDelayValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the One-way delay results during this
|
|
sampling interval."
|
|
::= { acdCfmResultOneWayDelayEntry 4 }
|
|
|
|
acdCfmResultOneWayDelayAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the One Way Delay alert."
|
|
::= { acdCfmResultOneWayDelayEntry 5 }
|
|
|
|
acdCfmResultOneWayDelayAvgAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the One Way Average Delay alert."
|
|
::= { acdCfmResultOneWayDelayEntry 6 }
|
|
|
|
acdCfmResultOneWayDelaySamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate One-way delay results."
|
|
::= { acdCfmResultOneWayDelayEntry 7 }
|
|
|
|
acdCfmResultOneWayDelayMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultOneWayDelayEntry 8 }
|
|
|
|
acdCfmResultOneWayDelayMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultOneWayDelayEntry 9 }
|
|
|
|
acdCfmResultOneWayDelayAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultOneWayDelayEntry 10}
|
|
|
|
acdCfmResultOneWayDelayThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmResultOneWayDelayEntry 11 }
|
|
|
|
acdCfmResultOneWayDelayInstValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay Instantaneous value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultOneWayDelayEntry 12 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM One Way delay variation Results table
|
|
-- This table contains all CFM DMM One Way delay variation entry results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmResultOneWayDvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmResultOneWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One way delay variation result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 3 }
|
|
|
|
acdCfmResultOneWayDvEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmResultOneWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of One Way Delay variation results for a DM entry."
|
|
INDEX { acdCfmResultOneWayDvID }
|
|
::= { acdCfmResultOneWayDvTable 1 }
|
|
|
|
AcdCfmResultOneWayDvEntry ::= SEQUENCE {
|
|
acdCfmResultOneWayDvID Unsigned32,
|
|
acdCfmResultOneWayDvPeriodIndex Unsigned32,
|
|
acdCfmResultOneWayDvIntervalStart DateAndTime,
|
|
acdCfmResultOneWayDvValid TruthValue,
|
|
acdCfmResultOneWayDvAlert TruthValue,
|
|
acdCfmResultOneWayDvAvgAlert TruthValue,
|
|
acdCfmResultOneWayDvSamples Unsigned32,
|
|
acdCfmResultOneWayDvMinValue Integer32,
|
|
acdCfmResultOneWayDvMaxValue Integer32,
|
|
acdCfmResultOneWayDvAvgValue Integer32,
|
|
acdCfmResultOneWayDvThreshExc Unsigned32,
|
|
acdCfmResultOneWayDvInstValue Integer32
|
|
}
|
|
|
|
acdCfmResultOneWayDvID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This value follows
|
|
the ordering of the DM table."
|
|
::= { acdCfmResultOneWayDvEntry 1 }
|
|
|
|
acdCfmResultOneWayDvPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmResultOneWayDvEntry 2 }
|
|
|
|
acdCfmResultOneWayDvIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmResultOneWayDvEntry 3 }
|
|
|
|
acdCfmResultOneWayDvValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the One-way delay variation results during this
|
|
sampling interval."
|
|
::= { acdCfmResultOneWayDvEntry 4 }
|
|
|
|
acdCfmResultOneWayDvAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the One Way Delay variation alert."
|
|
::= { acdCfmResultOneWayDvEntry 5 }
|
|
|
|
acdCfmResultOneWayDvAvgAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the One Way Average Delay variation alert."
|
|
::= { acdCfmResultOneWayDvEntry 6 }
|
|
|
|
acdCfmResultOneWayDvSamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate One-way delay variation results."
|
|
::= { acdCfmResultOneWayDvEntry 7 }
|
|
|
|
acdCfmResultOneWayDvMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variation minimum value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmResultOneWayDvEntry 8 }
|
|
|
|
acdCfmResultOneWayDvMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variationmaximum value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmResultOneWayDvEntry 9 }
|
|
|
|
acdCfmResultOneWayDvAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variation average value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmResultOneWayDvEntry 10}
|
|
|
|
acdCfmResultOneWayDvThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmResultOneWayDvEntry 11 }
|
|
|
|
acdCfmResultOneWayDvInstValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variation Instantaneous value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmResultOneWayDvEntry 12 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM Two Way delay Results table
|
|
-- This table contains all CFM DMM Two Way delay entry results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmResultTwoWayDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmResultTwoWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two way delay result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 4 }
|
|
|
|
acdCfmResultTwoWayDelayEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmResultTwoWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of Two Way Delay results for a DM entry."
|
|
INDEX { acdCfmResultTwoWayDelayID }
|
|
::= { acdCfmResultTwoWayDelayTable 1 }
|
|
|
|
AcdCfmResultTwoWayDelayEntry ::= SEQUENCE {
|
|
acdCfmResultTwoWayDelayID Unsigned32,
|
|
acdCfmResultTwoWayDelayPeriodIndex Unsigned32,
|
|
acdCfmResultTwoWayDelayIntervalStart DateAndTime,
|
|
acdCfmResultTwoWayDelayValid TruthValue,
|
|
acdCfmResultTwoWayDelayAlert TruthValue,
|
|
acdCfmResultTwoWayDelayAvgAlert TruthValue,
|
|
acdCfmResultTwoWayDelaySamples Unsigned32,
|
|
acdCfmResultTwoWayDelayMinValue Integer32,
|
|
acdCfmResultTwoWayDelayMaxValue Integer32,
|
|
acdCfmResultTwoWayDelayAvgValue Integer32,
|
|
acdCfmResultTwoWayDelayThreshExc Unsigned32,
|
|
acdCfmResultTwoWayDelayInstValue Integer32
|
|
}
|
|
|
|
acdCfmResultTwoWayDelayID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the Dm table."
|
|
::= { acdCfmResultTwoWayDelayEntry 1 }
|
|
|
|
acdCfmResultTwoWayDelayPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmResultTwoWayDelayEntry 2 }
|
|
|
|
acdCfmResultTwoWayDelayIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmResultTwoWayDelayEntry 3 }
|
|
|
|
acdCfmResultTwoWayDelayValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the Two way delay results during this
|
|
sampling interval."
|
|
::= { acdCfmResultTwoWayDelayEntry 4 }
|
|
|
|
acdCfmResultTwoWayDelayAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the Two Way Delay alert."
|
|
::= { acdCfmResultTwoWayDelayEntry 5 }
|
|
|
|
acdCfmResultTwoWayDelayAvgAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the Two Way Average Delay alert."
|
|
::= { acdCfmResultTwoWayDelayEntry 6 }
|
|
|
|
acdCfmResultTwoWayDelaySamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate Two-way delay results."
|
|
::= { acdCfmResultTwoWayDelayEntry 7 }
|
|
|
|
acdCfmResultTwoWayDelayMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDelayEntry 8 }
|
|
|
|
acdCfmResultTwoWayDelayMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDelayEntry 9 }
|
|
|
|
acdCfmResultTwoWayDelayAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDelayEntry 10}
|
|
|
|
acdCfmResultTwoWayDelayThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmResultTwoWayDelayEntry 11 }
|
|
|
|
acdCfmResultTwoWayDelayInstValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay Instantaneous value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDelayEntry 12 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM Two Way delay variation Results table
|
|
-- This table contains all CFM DMM Two Way delay variation entry results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmResultTwoWayDvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmResultTwoWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two way delay variation result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 5 }
|
|
|
|
acdCfmResultTwoWayDvEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmResultTwoWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of One Way Delay variation results for a DM entry."
|
|
INDEX { acdCfmResultTwoWayDvID }
|
|
::= { acdCfmResultTwoWayDvTable 1 }
|
|
|
|
AcdCfmResultTwoWayDvEntry ::= SEQUENCE {
|
|
acdCfmResultTwoWayDvID Unsigned32,
|
|
acdCfmResultTwoWayDvPeriodIndex Unsigned32,
|
|
acdCfmResultTwoWayDvIntervalStart DateAndTime,
|
|
acdCfmResultTwoWayDvValid TruthValue,
|
|
acdCfmResultTwoWayDvAlert TruthValue,
|
|
acdCfmResultTwoWayDvAvgAlert TruthValue,
|
|
acdCfmResultTwoWayDvSamples Unsigned32,
|
|
acdCfmResultTwoWayDvMinValue Integer32,
|
|
acdCfmResultTwoWayDvMaxValue Integer32,
|
|
acdCfmResultTwoWayDvAvgValue Integer32,
|
|
acdCfmResultTwoWayDvThreshExc Unsigned32,
|
|
acdCfmResultTwoWayDvInstValue Integer32
|
|
}
|
|
|
|
acdCfmResultTwoWayDvID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This
|
|
value follows the ordering of the Dm table."
|
|
::= { acdCfmResultTwoWayDvEntry 1 }
|
|
|
|
acdCfmResultTwoWayDvPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmResultTwoWayDvEntry 2 }
|
|
|
|
acdCfmResultTwoWayDvIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmResultTwoWayDvEntry 3 }
|
|
|
|
acdCfmResultTwoWayDvValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the two-way delay variation results during this
|
|
sampling interval."
|
|
::= { acdCfmResultTwoWayDvEntry 4 }
|
|
|
|
acdCfmResultTwoWayDvAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the Two Way Delay variation alert."
|
|
::= { acdCfmResultTwoWayDvEntry 5 }
|
|
|
|
acdCfmResultTwoWayDvAvgAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the Two Way Average Delay variation alert."
|
|
::= { acdCfmResultTwoWayDvEntry 6 }
|
|
|
|
acdCfmResultTwoWayDvSamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate Two-way delay variation results."
|
|
::= { acdCfmResultTwoWayDvEntry 7 }
|
|
|
|
acdCfmResultTwoWayDvMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDvEntry 8 }
|
|
|
|
acdCfmResultTwoWayDvMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDvEntry 9 }
|
|
|
|
acdCfmResultTwoWayDvAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmResultTwoWayDvEntry 10}
|
|
|
|
acdCfmResultTwoWayDvThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmResultTwoWayDvEntry 11 }
|
|
|
|
acdCfmResultTwoWayDvInstValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation Instantaneous value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmResultTwoWayDvEntry 12 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM One Way delay History Results table
|
|
-- This table contains all CFM DMM One Way delay entry History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmHistResultOneWayDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmHistResultOneWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One way delay result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 6 }
|
|
|
|
acdCfmHistResultOneWayDelayEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmHistResultOneWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of One Way Delay results for a DM entry."
|
|
INDEX { acdCfmHistResultOneWayDelayID,
|
|
acdCfmHistResultOneWayDelaySampleIndex }
|
|
::= { acdCfmHistResultOneWayDelayTable 1 }
|
|
|
|
AcdCfmHistResultOneWayDelayEntry ::= SEQUENCE {
|
|
acdCfmHistResultOneWayDelayID Unsigned32,
|
|
acdCfmHistResultOneWayDelaySampleIndex Unsigned32,
|
|
acdCfmHistResultOneWayDelayStatus INTEGER,
|
|
acdCfmHistResultOneWayDelayDuration Unsigned32,
|
|
acdCfmHistResultOneWayDelayIntervalEnd DateAndTime,
|
|
acdCfmHistResultOneWayDelaySamples Unsigned32,
|
|
acdCfmHistResultOneWayDelayMinValue Integer32,
|
|
acdCfmHistResultOneWayDelayMaxValue Integer32,
|
|
acdCfmHistResultOneWayDelayAvgValue Integer32,
|
|
acdCfmHistResultOneWayDelayThreshExc Unsigned32
|
|
}
|
|
|
|
acdCfmHistResultOneWayDelayID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the Dm table."
|
|
::= { acdCfmHistResultOneWayDelayEntry 1 }
|
|
|
|
acdCfmHistResultOneWayDelaySampleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmHistResultOneWayDelayEntry 2 }
|
|
|
|
acdCfmHistResultOneWayDelayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the One-way delay results during this
|
|
sampling interval."
|
|
::= { acdCfmHistResultOneWayDelayEntry 3 }
|
|
|
|
acdCfmHistResultOneWayDelayDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the Dm table."
|
|
::= { acdCfmHistResultOneWayDelayEntry 4 }
|
|
|
|
acdCfmHistResultOneWayDelayIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of the period."
|
|
::= { acdCfmHistResultOneWayDelayEntry 5 }
|
|
|
|
|
|
acdCfmHistResultOneWayDelaySamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate One-way delay results."
|
|
::= { acdCfmHistResultOneWayDelayEntry 6 }
|
|
|
|
acdCfmHistResultOneWayDelayMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultOneWayDelayEntry 7 }
|
|
|
|
acdCfmHistResultOneWayDelayMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultOneWayDelayEntry 8 }
|
|
|
|
acdCfmHistResultOneWayDelayAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultOneWayDelayEntry 9}
|
|
|
|
acdCfmHistResultOneWayDelayThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmHistResultOneWayDelayEntry 10 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM One Way delay variation History Results table
|
|
-- This table contains all CFM DMM One Way delay variation entry History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmHistResultOneWayDvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmHistResultOneWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One way delay variation result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 7 }
|
|
|
|
acdCfmHistResultOneWayDvEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmHistResultOneWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of One Way Delay variation results for a DM entry."
|
|
INDEX { acdCfmHistResultOneWayDvID,
|
|
acdCfmHistResultOneWayDvSampleIndex }
|
|
::= { acdCfmHistResultOneWayDvTable 1 }
|
|
|
|
AcdCfmHistResultOneWayDvEntry ::= SEQUENCE {
|
|
acdCfmHistResultOneWayDvID Unsigned32,
|
|
acdCfmHistResultOneWayDvSampleIndex Unsigned32,
|
|
acdCfmHistResultOneWayDvStatus INTEGER,
|
|
acdCfmHistResultOneWayDvDuration Unsigned32,
|
|
acdCfmHistResultOneWayDvIntervalEnd DateAndTime,
|
|
acdCfmHistResultOneWayDvSamples Unsigned32,
|
|
acdCfmHistResultOneWayDvMinValue Integer32,
|
|
acdCfmHistResultOneWayDvMaxValue Integer32,
|
|
acdCfmHistResultOneWayDvAvgValue Integer32,
|
|
acdCfmHistResultOneWayDvThreshExc Unsigned32
|
|
}
|
|
|
|
acdCfmHistResultOneWayDvID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This value follows
|
|
the ordering of the DM table."
|
|
::= { acdCfmHistResultOneWayDvEntry 1 }
|
|
|
|
acdCfmHistResultOneWayDvSampleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmHistResultOneWayDvEntry 2 }
|
|
|
|
acdCfmHistResultOneWayDvStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the One-way delay variation results during this
|
|
sampling interval."
|
|
::= { acdCfmHistResultOneWayDvEntry 3 }
|
|
|
|
acdCfmHistResultOneWayDvDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is sampled for this entry."
|
|
::= { acdCfmHistResultOneWayDvEntry 4 }
|
|
|
|
acdCfmHistResultOneWayDvIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of the period."
|
|
::= { acdCfmHistResultOneWayDvEntry 5 }
|
|
|
|
acdCfmHistResultOneWayDvSamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate One-way delay variation results."
|
|
::= { acdCfmHistResultOneWayDvEntry 6 }
|
|
|
|
acdCfmHistResultOneWayDvMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variation minimum value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmHistResultOneWayDvEntry 7 }
|
|
|
|
acdCfmHistResultOneWayDvMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variationmaximum value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmHistResultOneWayDvEntry 8 }
|
|
|
|
acdCfmHistResultOneWayDvAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the One-way delay variation average value. The value is
|
|
expressed in micro-seconds."
|
|
::= { acdCfmHistResultOneWayDvEntry 9 }
|
|
|
|
acdCfmHistResultOneWayDvThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmHistResultOneWayDvEntry 10 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM Two Way delay History Results table
|
|
-- This table contains all CFM DMM Two Way delay entry History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmHistResultTwoWayDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmHistResultTwoWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two way delay result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 8 }
|
|
|
|
acdCfmHistResultTwoWayDelayEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmHistResultTwoWayDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of Two Way Delay results for a DM entry."
|
|
INDEX { acdCfmHistResultTwoWayDelayID,
|
|
acdCfmHistResultTwoWayDelaySampleIndex }
|
|
::= { acdCfmHistResultTwoWayDelayTable 1 }
|
|
|
|
AcdCfmHistResultTwoWayDelayEntry ::= SEQUENCE {
|
|
acdCfmHistResultTwoWayDelayID Unsigned32,
|
|
acdCfmHistResultTwoWayDelaySampleIndex Unsigned32,
|
|
acdCfmHistResultTwoWayDelayStatus INTEGER,
|
|
acdCfmHistResultTwoWayDelayDuration Unsigned32,
|
|
acdCfmHistResultTwoWayDelayIntervalEnd DateAndTime,
|
|
acdCfmHistResultTwoWayDelaySamples Unsigned32,
|
|
acdCfmHistResultTwoWayDelayMinValue Integer32,
|
|
acdCfmHistResultTwoWayDelayMaxValue Integer32,
|
|
acdCfmHistResultTwoWayDelayAvgValue Integer32,
|
|
acdCfmHistResultTwoWayDelayThreshExc Unsigned32
|
|
}
|
|
|
|
acdCfmHistResultTwoWayDelayID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay Measurement instance. This value follows
|
|
the ordering of the Dm table."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 1 }
|
|
|
|
acdCfmHistResultTwoWayDelaySampleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 2 }
|
|
|
|
acdCfmHistResultTwoWayDelayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the Two way delay results during this
|
|
sampling interval."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 3 }
|
|
|
|
acdCfmHistResultTwoWayDelayDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is sampled for this entry."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 4 }
|
|
|
|
acdCfmHistResultTwoWayDelayIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of the period."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 5 }
|
|
|
|
acdCfmHistResultTwoWayDelaySamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate Two-way delay results."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 6 }
|
|
|
|
acdCfmHistResultTwoWayDelayMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 7 }
|
|
|
|
acdCfmHistResultTwoWayDelayMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 8 }
|
|
|
|
acdCfmHistResultTwoWayDelayAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Two-way delay average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 9 }
|
|
|
|
acdCfmHistResultTwoWayDelayThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmHistResultTwoWayDelayEntry 10 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM DMM Two Way delay variation History Results table
|
|
-- This table contains all CFM DMM Two Way delay variation entry History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmHistResultTwoWayDvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmHistResultTwoWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two way delay variation result table of all DM entries."
|
|
::= { acdCfmDelayMeasurement 9 }
|
|
|
|
acdCfmHistResultTwoWayDvEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmHistResultTwoWayDvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of two Way Delay variation results for a DM entry."
|
|
INDEX { acdCfmHistResultTwoWayDvID,
|
|
acdCfmHistResultTwoWayDvSampleIndex }
|
|
::= { acdCfmHistResultTwoWayDvTable 1 }
|
|
|
|
AcdCfmHistResultTwoWayDvEntry ::= SEQUENCE {
|
|
acdCfmHistResultTwoWayDvID Unsigned32,
|
|
acdCfmHistResultTwoWayDvSampleIndex Unsigned32,
|
|
acdCfmHistResultTwoWayDvStatus INTEGER,
|
|
acdCfmHistResultTwoWayDvDuration Unsigned32,
|
|
acdCfmHistResultTwoWayDvIntervalEnd DateAndTime,
|
|
acdCfmHistResultTwoWayDvSamples Unsigned32,
|
|
acdCfmHistResultTwoWayDvMinValue Integer32,
|
|
acdCfmHistResultTwoWayDvMaxValue Integer32,
|
|
acdCfmHistResultTwoWayDvAvgValue Integer32,
|
|
acdCfmHistResultTwoWayDvThreshExc Unsigned32
|
|
}
|
|
|
|
acdCfmHistResultTwoWayDvID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This
|
|
value follows the ordering of the Dm table."
|
|
::= { acdCfmHistResultTwoWayDvEntry 1 }
|
|
|
|
acdCfmHistResultTwoWayDvSampleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same DM instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmHistResultTwoWayDvEntry 2 }
|
|
|
|
acdCfmHistResultTwoWayDvStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the two-way delay variation results during this
|
|
sampling interval."
|
|
::= { acdCfmHistResultTwoWayDvEntry 3 }
|
|
|
|
acdCfmHistResultTwoWayDvDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is sampled for this entry."
|
|
::= { acdCfmHistResultTwoWayDvEntry 4 }
|
|
|
|
acdCfmHistResultTwoWayDvIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of the period."
|
|
::= { acdCfmHistResultTwoWayDvEntry 5 }
|
|
|
|
acdCfmHistResultTwoWayDvSamples OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate Two-way delay variation results."
|
|
::= { acdCfmHistResultTwoWayDvEntry 6 }
|
|
|
|
acdCfmHistResultTwoWayDvMinValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation minimum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDvEntry 7 }
|
|
|
|
acdCfmHistResultTwoWayDvMaxValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation maximum value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDvEntry 8 }
|
|
|
|
acdCfmHistResultTwoWayDvAvgValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the two-way delay variation average value. The value is expressed in
|
|
micro-seconds."
|
|
::= { acdCfmHistResultTwoWayDvEntry 9 }
|
|
|
|
acdCfmHistResultTwoWayDvThreshExc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples exceeding the limit."
|
|
::= { acdCfmHistResultTwoWayDvEntry 10 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Packet Loss configuration table
|
|
-- This table contains all Packet Loss entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmPktLossCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmPktLossCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration table of all Packet Loss entries."
|
|
::= { acdCfmPacketLoss 1 }
|
|
|
|
acdCfmPktLossCfgEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmPktLossCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings to manage a Packet loss instance."
|
|
INDEX { acdCfmPktLossCfgID }
|
|
::= { acdCfmPktLossCfgTable 1 }
|
|
|
|
|
|
AcdCfmPktLossCfgEntry ::= SEQUENCE {
|
|
acdCfmPktLossCfgID Unsigned32,
|
|
acdCfmPktLossCfgRowStatus RowStatus,
|
|
acdCfmPktLossCfgMepIdx Unsigned32,
|
|
acdCfmPktLossCfgRemoteMepId Unsigned32,
|
|
acdCfmPktLossCfgPriority Unsigned32,
|
|
acdCfmPktLossCfgEnable TruthValue,
|
|
acdCfmPktLossCfgInterval Unsigned32,
|
|
acdCfmPktLossCfgRefPeriod Unsigned32,
|
|
acdCfmPktLossCfgThresh Unsigned32,
|
|
acdCfmPktLossCfgRatioThresh Unsigned32
|
|
}
|
|
|
|
acdCfmPktLossCfgID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Packet Loss instance. This value follows the
|
|
ordering the results table."
|
|
::= { acdCfmPktLossCfgEntry 1 }
|
|
|
|
acdCfmPktLossCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The writable columns in a row can not be changed if the row is active.
|
|
All columns must have a valid value before a row can be activated."
|
|
::= { acdCfmPktLossCfgEntry 2 }
|
|
|
|
acdCfmPktLossCfgMepIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier."
|
|
::= { acdCfmPktLossCfgEntry 3 }
|
|
|
|
acdCfmPktLossCfgRemoteMepId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Maintenance association End Point Identifier."
|
|
::= { acdCfmPktLossCfgEntry 4 }
|
|
|
|
acdCfmPktLossCfgPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN priority. Its value ranges from 0 to 7. Same has CCM
|
|
priority for packet loss based on CCM."
|
|
DEFVAL { 0 }
|
|
::= { acdCfmPktLossCfgEntry 5 }
|
|
|
|
acdCfmPktLossCfgEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable CFM to perform Packet Loss measurement."
|
|
DEFVAL { false }
|
|
::= { acdCfmPktLossCfgEntry 6 }
|
|
|
|
acdCfmPktLossCfgInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..60000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in milliseconds at which CFM issues Packet Loss measurement
|
|
packets. Same has CCM interval for packet loss based on CCM."
|
|
DEFVAL { 10000 }
|
|
::= { acdCfmPktLossCfgEntry 7 }
|
|
|
|
acdCfmPktLossCfgRefPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference period in minutes for Packet Loss Measurement."
|
|
DEFVAL { 15 }
|
|
::= { acdCfmPktLossCfgEntry 8 }
|
|
|
|
acdCfmPktLossCfgThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of packet loss allowed without issuing an alarm."
|
|
DEFVAL { 1 }
|
|
::= { acdCfmPktLossCfgEntry 9 }
|
|
|
|
acdCfmPktLossCfgRatioThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet loss ratio threshold allowed without issuing an alarm
|
|
expressed in millionth of percent (1,000,000 is 1%)."
|
|
DEFVAL { 0 }
|
|
::= { acdCfmPktLossCfgEntry 10 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM Packet Loss Results table
|
|
-- This table contains all CFM DMM Packet Loss results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmResultPktLossTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmResultPktLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet loss result table of a MEP and remote MEP pair."
|
|
::= { acdCfmPacketLoss 2 }
|
|
|
|
acdCfmResultPktLossEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmResultPktLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of packet loss result for a specific MEP and
|
|
remote MEP pair."
|
|
INDEX { acdCfmResultPktLossID }
|
|
::= { acdCfmResultPktLossTable 1 }
|
|
|
|
AcdCfmResultPktLossEntry ::= SEQUENCE {
|
|
acdCfmResultPktLossID Unsigned32,
|
|
acdCfmResultPktLossPeriodIndex Unsigned32,
|
|
acdCfmResultPktLossIntervalStart DateAndTime,
|
|
acdCfmResultPktLossValid TruthValue,
|
|
acdCfmResultPktLossAlert TruthValue,
|
|
acdCfmResultPktLossSamples Counter32,
|
|
acdCfmResultPktLossOverflowSamples Counter32,
|
|
acdCfmResultPktLossHCSamples Counter64,
|
|
acdCfmResultPktLossNbrLoss Counter32,
|
|
acdCfmResultPktLossOverflowNbrLoss Counter32,
|
|
acdCfmResultPktLossHCNbrLoss Counter64,
|
|
acdCfmResultPktLossNbrGaps Counter32,
|
|
acdCfmResultPktLossOverflowNbrGaps Counter32,
|
|
acdCfmResultPktLossHCNbrGaps Counter64,
|
|
acdCfmResultPktLossLargestGap Counter32,
|
|
acdCfmResultPktLossOverflowLargestGap Counter32,
|
|
acdCfmResultPktLossHCLargestGap Counter64,
|
|
acdCfmResultPktLossRatio Unsigned32
|
|
}
|
|
|
|
acdCfmResultPktLossID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This
|
|
value follows the ordering of the Dm table."
|
|
::= { acdCfmResultPktLossEntry 1 }
|
|
|
|
acdCfmResultPktLossPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same PL instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmResultPktLossEntry 2 }
|
|
|
|
acdCfmResultPktLossIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmResultPktLossEntry 3 }
|
|
|
|
acdCfmResultPktLossValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the packet loss results during this
|
|
sampling interval."
|
|
::= { acdCfmResultPktLossEntry 4 }
|
|
|
|
acdCfmResultPktLossAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the Packet Loss alert."
|
|
::= { acdCfmResultPktLossEntry 5 }
|
|
|
|
acdCfmResultPktLossSamples OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate packet loss results."
|
|
::= { acdCfmResultPktLossEntry 6 }
|
|
|
|
acdCfmResultPktLossOverflowSamples OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmResultPktLossSamples counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmResultPktLossSamples, it provides the equivalent of
|
|
the 64 bits counter acdCfmResultPktLossHCSamples."
|
|
::= { acdCfmResultPktLossEntry 7 }
|
|
|
|
acdCfmResultPktLossHCSamples OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate packet loss results."
|
|
::= { acdCfmResultPktLossEntry 8 }
|
|
|
|
acdCfmResultPktLossNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of packet loss."
|
|
::= { acdCfmResultPktLossEntry 9 }
|
|
|
|
acdCfmResultPktLossOverflowNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmResultPktLossNbrLoss counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmResultPktLossNbrLoss, it provides the equivalent of
|
|
the 64 bits counter acdCfmResultPktLossHCNbrLoss."
|
|
::= { acdCfmResultPktLossEntry 10 }
|
|
|
|
acdCfmResultPktLossHCNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of packet loss."
|
|
::= { acdCfmResultPktLossEntry 11 }
|
|
|
|
acdCfmResultPktLossNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of gap."
|
|
::= { acdCfmResultPktLossEntry 12 }
|
|
|
|
acdCfmResultPktLossOverflowNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmResultPktLossNbrGaps counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmResultPktLossNbrGaps, it provides the equivalent of
|
|
the 64 bits counter acdCfmResultPktLossHCNbrGaps."
|
|
::= { acdCfmResultPktLossEntry 13 }
|
|
|
|
acdCfmResultPktLossHCNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of gap."
|
|
::= { acdCfmResultPktLossEntry 14 }
|
|
|
|
acdCfmResultPktLossLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the largest gap size in packets."
|
|
::= { acdCfmResultPktLossEntry 15 }
|
|
|
|
acdCfmResultPktLossOverflowLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmResultPktLossLargestGap counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmResultPktLossLargestGap, it provides the equivalent
|
|
of the 64 bits counter acdCfmResultPktLossHCLargestGap."
|
|
::= { acdCfmResultPktLossEntry 16 }
|
|
|
|
acdCfmResultPktLossHCLargestGap OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the largest gap size in packets."
|
|
::= { acdCfmResultPktLossEntry 17 }
|
|
|
|
acdCfmResultPktLossRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet loss ratio. The packet loss ratio is the percent
|
|
of packets transmitted but not received in millionth of a percent
|
|
(1,000,000 is 1%)."
|
|
::= { acdCfmResultPktLossEntry 18 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CFM Packet Loss History Results table
|
|
-- This table contains all CFM Packet Loss History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmHistResultPktLossTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmHistResultPktLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet loss history result table of a MEP and remote MEP pair."
|
|
::= { acdCfmPacketLoss 3 }
|
|
|
|
acdCfmHistResultPktLossEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmHistResultPktLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of Packet loss history result for a specific
|
|
MEP and remote MEP pair."
|
|
INDEX { acdCfmHistResultPktLossID,
|
|
acdCfmHistResultPktLossSampleIndex }
|
|
::= { acdCfmHistResultPktLossTable 1 }
|
|
|
|
AcdCfmHistResultPktLossEntry ::= SEQUENCE {
|
|
acdCfmHistResultPktLossID Unsigned32,
|
|
acdCfmHistResultPktLossSampleIndex Unsigned32,
|
|
acdCfmHistResultPktLossStatus INTEGER,
|
|
acdCfmHistResultPktLossDuration Unsigned32,
|
|
acdCfmHistResultPktLossIntervalEnd DateAndTime,
|
|
acdCfmHistResultPktLossSamples Counter32,
|
|
acdCfmHistResultPktLossOverflowSamples Counter32,
|
|
acdCfmHistResultPktLossHCSamples Counter64,
|
|
acdCfmHistResultPktLossNbrLoss Counter32,
|
|
acdCfmHistResultPktLossOverflowNbrLoss Counter32,
|
|
acdCfmHistResultPktLossHCNbrLoss Counter64,
|
|
acdCfmHistResultPktLossNbrGaps Counter32,
|
|
acdCfmHistResultPktLossOverflowNbrGaps Counter32,
|
|
acdCfmHistResultPktLossHCNbrGaps Counter64,
|
|
acdCfmHistResultPktLossLargestGap Counter32,
|
|
acdCfmHistResultPktLossOverflowLargestGap Counter32,
|
|
acdCfmHistResultPktLossHCLargestGap Counter64,
|
|
acdCfmHistResultPktLossRatio Unsigned32
|
|
}
|
|
|
|
acdCfmHistResultPktLossID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Delay variation Measurement instance. This
|
|
value follows the ordering of the Dm table."
|
|
::= { acdCfmHistResultPktLossEntry 1 }
|
|
|
|
acdCfmHistResultPktLossSampleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same PL instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmHistResultPktLossEntry 2 }
|
|
|
|
acdCfmHistResultPktLossStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the validity of the packet loss results during this
|
|
sampling interval."
|
|
::= { acdCfmHistResultPktLossEntry 3 }
|
|
|
|
acdCfmHistResultPktLossDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is sampled for this entry."
|
|
::= { acdCfmHistResultPktLossEntry 4 }
|
|
|
|
|
|
acdCfmHistResultPktLossIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of this entry."
|
|
::= { acdCfmHistResultPktLossEntry 5 }
|
|
|
|
acdCfmHistResultPktLossSamples OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate packet loss results. This is a 32 bits counter.
|
|
Combined with the overflow counter it provides the equivalent of the
|
|
64 bits counter acdCfmHistResultPktLossHCSamples."
|
|
::= { acdCfmHistResultPktLossEntry 6 }
|
|
|
|
acdCfmHistResultPktLossOverflowSamples OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmHistResultPktLossSamples
|
|
counter has overflowed during this sampling interval. This is a
|
|
32 bits counter. Combined with acdCfmHistResultPktLossSamples, it
|
|
provides the equivalent of the 64 bits counter
|
|
acdCfmHistResultPktLossHCSamples."
|
|
::= { acdCfmHistResultPktLossEntry 7 }
|
|
|
|
acdCfmHistResultPktLossHCSamples OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of samples gathered during the sampling
|
|
interval to calculate packet loss results."
|
|
::= { acdCfmHistResultPktLossEntry 8 }
|
|
|
|
acdCfmHistResultPktLossNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets loss during this sampling interval. This is
|
|
a 32 bits counter. Combined with the overflow counter it provides the
|
|
equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss."
|
|
::= { acdCfmHistResultPktLossEntry 9 }
|
|
|
|
acdCfmHistResultPktLossOverflowNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmHistResultPktLossNbrLoss counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmHistResultPktLossNbrLoss, it provides the equivalent of
|
|
the 64 bits counter acdCfmHistResultPktLossHCNbrLoss."
|
|
::= { acdCfmHistResultPktLossEntry 10 }
|
|
|
|
acdCfmHistResultPktLossHCNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets loss during this sampling interval."
|
|
::= { acdCfmHistResultPktLossEntry 11 }
|
|
|
|
acdCfmHistResultPktLossNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of gap during this sampling interval. This is a
|
|
32 bits counter. Combined with the overflow counter it provides the
|
|
equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps."
|
|
::= { acdCfmHistResultPktLossEntry 12 }
|
|
|
|
acdCfmHistResultPktLossOverflowNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmHistResultPktLossNbrGaps counter
|
|
has overflowed during this sampling interval. This is a 32 bits counter.
|
|
Combined with acdCfmHistResultPktLossNbrGaps, it provides the equivalent of
|
|
the 64 bits counter acdCfmHistResultPktLossHCNbrGaps."
|
|
::= { acdCfmHistResultPktLossEntry 13 }
|
|
|
|
acdCfmHistResultPktLossHCNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of gap during this sampling interval."
|
|
::= { acdCfmHistResultPktLossEntry 14 }
|
|
|
|
acdCfmHistResultPktLossLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the largest gap size in packets during this sampling interval. This is
|
|
a 32 bits counter. Combined with the overflow counter it provides the
|
|
equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps."
|
|
::= { acdCfmHistResultPktLossEntry 15 }
|
|
|
|
acdCfmHistResultPktLossOverflowLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated acdCfmHistResultPktLossLargestGap
|
|
counter has overflowed during this sampling interval. This is a
|
|
32 bits counter. Combined with acdCfmHistResultPktLossLargestGap, it
|
|
provides the equivalent of the 64 bits counter
|
|
acdCfmHistResultPktLossHCLargestGap."
|
|
::= { acdCfmHistResultPktLossEntry 16 }
|
|
|
|
acdCfmHistResultPktLossHCLargestGap OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the largest gap size in packets during this sampling interval."
|
|
::= { acdCfmHistResultPktLossEntry 17 }
|
|
|
|
acdCfmHistResultPktLossRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet loss ratio. The packet loss ratio is the percent
|
|
of packets transmitted but not received in millionth of a percent
|
|
(1,000,000 is 1%)."
|
|
::= { acdCfmHistResultPktLossEntry 18 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The SLM configuration table
|
|
-- This table contains all SLM entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmSlmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmSlmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration table of all SLM entries."
|
|
::= { acdCfmSlm 1 }
|
|
|
|
acdCfmSlmCfgEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmSlmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings to manage a SLM instance."
|
|
INDEX { acdCfmSlmCfgID }
|
|
::= { acdCfmSlmCfgTable 1 }
|
|
|
|
|
|
AcdCfmSlmCfgEntry ::= SEQUENCE {
|
|
acdCfmSlmCfgID Unsigned32,
|
|
acdCfmSlmCfgRowStatus RowStatus,
|
|
acdCfmSlmCfgMepIdx Unsigned32,
|
|
acdCfmSlmCfgRemoteMepId Unsigned32,
|
|
acdCfmSlmCfgPriority Unsigned32,
|
|
acdCfmSlmCfgState TruthValue,
|
|
acdCfmSlmCfgInterval Unsigned32,
|
|
acdCfmSlmCfgRefPeriod Unsigned32,
|
|
acdCfmSlmCfgNearEndThresh Unsigned32,
|
|
acdCfmSlmCfgFarEndThresh Unsigned32,
|
|
acdCfmSlmCfgName DisplayString
|
|
}
|
|
|
|
acdCfmSlmCfgID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SLM instance. This value follows the
|
|
ordering the results table."
|
|
::= { acdCfmSlmCfgEntry 1 }
|
|
|
|
acdCfmSlmCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The writable columns in a row can not be changed if the row is active.
|
|
All columns must have a valid value before a row can be activated."
|
|
::= { acdCfmSlmCfgEntry 2 }
|
|
|
|
acdCfmSlmCfgMepIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier."
|
|
::= { acdCfmSlmCfgEntry 3 }
|
|
|
|
acdCfmSlmCfgRemoteMepId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Maintenance association End Point Identifier."
|
|
::= { acdCfmSlmCfgEntry 4 }
|
|
|
|
acdCfmSlmCfgPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN priority. Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdCfmSlmCfgEntry 5 }
|
|
|
|
acdCfmSlmCfgState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the SLM instance"
|
|
DEFVAL { false }
|
|
::= { acdCfmSlmCfgEntry 6 }
|
|
|
|
acdCfmSlmCfgInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in milliseconds at which CFM issues Synthetic Loss Measurement
|
|
packets."
|
|
DEFVAL { 1000 }
|
|
::= { acdCfmSlmCfgEntry 7 }
|
|
|
|
acdCfmSlmCfgRefPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference period in minutes for Synthetic Loss Measurement."
|
|
DEFVAL { 15 }
|
|
::= { acdCfmSlmCfgEntry 8 }
|
|
|
|
acdCfmSlmCfgNearEndThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end packet loss ratio threshold allowed without issuing an alarm
|
|
expressed in millionth of percent (1,000,000 is 1%)."
|
|
DEFVAL { 1 }
|
|
::= { acdCfmSlmCfgEntry 9 }
|
|
|
|
acdCfmSlmCfgFarEndThresh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end packet loss ratio threshold allowed without issuing an alarm
|
|
expressed in millionth of percent (1,000,000 is 1%)."
|
|
DEFVAL { 0 }
|
|
::= { acdCfmSlmCfgEntry 10 }
|
|
|
|
acdCfmSlmCfgName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the instance"
|
|
DEFVAL { "new" }
|
|
::= { acdCfmSlmCfgEntry 11 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The SLM Results table
|
|
-- This table contains all SLM results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmSlmResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmSlmResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SLM result table of a MEP and remote MEP pair."
|
|
::= { acdCfmSlm 2 }
|
|
|
|
acdCfmSlmResultEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmSlmResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of SLM result for a specific MEP and
|
|
remote MEP pair."
|
|
INDEX { acdCfmSlmResultID }
|
|
::= { acdCfmSlmResultTable 1 }
|
|
|
|
AcdCfmSlmResultEntry ::= SEQUENCE {
|
|
acdCfmSlmResultID Unsigned32,
|
|
acdCfmSlmResultPeriodIndex Unsigned32,
|
|
acdCfmSlmResultIntervalStart DateAndTime,
|
|
acdCfmSlmResultValid TruthValue,
|
|
acdCfmSlmResultNearEndAlert TruthValue,
|
|
acdCfmSlmResultFarEndAlert TruthValue,
|
|
acdCfmSlmResultTxSlm Counter32,
|
|
acdCfmSlmResultRxSlr Counter32,
|
|
acdCfmSlmResultRemoteRxSlm Counter32,
|
|
acdCfmSlmResultNearEndNbrLoss Counter32,
|
|
acdCfmSlmResultFarEndNbrLoss Counter32,
|
|
acdCfmSlmResultNearEndRatio Gauge32,
|
|
acdCfmSlmResultFarEndRatio Gauge32,
|
|
acdCfmSlmResultNbrGaps Counter32,
|
|
acdCfmSlmResultLargestGap Counter32
|
|
}
|
|
|
|
acdCfmSlmResultID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SLM instance. This
|
|
value follows the ordering of the SLM table."
|
|
::= { acdCfmSlmResultEntry 1 }
|
|
|
|
acdCfmSlmResultPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same PL instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmSlmResultEntry 2 }
|
|
|
|
acdCfmSlmResultIntervalStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the start of the period."
|
|
::= { acdCfmSlmResultEntry 3 }
|
|
|
|
acdCfmSlmResultValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reserved for future use."
|
|
::= { acdCfmSlmResultEntry 4 }
|
|
|
|
acdCfmSlmResultNearEndAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the SLM near end alert."
|
|
::= { acdCfmSlmResultEntry 5 }
|
|
|
|
acdCfmSlmResultFarEndAlert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the presence of the SLM far end alert."
|
|
::= { acdCfmSlmResultEntry 6 }
|
|
|
|
acdCfmSlmResultTxSlm OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLM frames sent."
|
|
::= { acdCfmSlmResultEntry 7 }
|
|
|
|
acdCfmSlmResultRxSlr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLR frames received."
|
|
::= { acdCfmSlmResultEntry 8 }
|
|
|
|
acdCfmSlmResultRemoteRxSlm OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLM frames received at the far end."
|
|
::= { acdCfmSlmResultEntry 9 }
|
|
|
|
acdCfmSlmResultNearEndNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of packets lost at the near end."
|
|
::= { acdCfmSlmResultEntry 10 }
|
|
|
|
acdCfmSlmResultFarEndNbrLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of packets lost at the far end."
|
|
::= { acdCfmSlmResultEntry 11 }
|
|
|
|
acdCfmSlmResultNearEndRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the packet loss ratio at the near end."
|
|
::= { acdCfmSlmResultEntry 12 }
|
|
|
|
acdCfmSlmResultFarEndRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the packet loss ratio at the far end."
|
|
::= { acdCfmSlmResultEntry 13 }
|
|
|
|
acdCfmSlmResultNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of gap."
|
|
::= { acdCfmSlmResultEntry 14 }
|
|
|
|
acdCfmSlmResultLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the largest gap."
|
|
::= { acdCfmSlmResultEntry 15 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The SLM History Results table
|
|
-- This table contains all CFM Packet Loss History results.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmSlmHistResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmSlmHistResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SLM history result table of a MEP and remote MEP pair."
|
|
::= { acdCfmSlm 3 }
|
|
|
|
acdCfmSlmHistResultEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmSlmHistResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of SLM history result for a specific
|
|
MEP and remote MEP pair."
|
|
INDEX { acdCfmSlmHistResultInstanceIndex, acdCfmSlmHistResultID }
|
|
::= { acdCfmSlmHistResultTable 1 }
|
|
|
|
AcdCfmSlmHistResultEntry ::= SEQUENCE {
|
|
acdCfmSlmHistResultID Unsigned32,
|
|
acdCfmSlmHistResultPeriodIndex Unsigned32,
|
|
acdCfmSlmHistResultIntervalEnd DateAndTime,
|
|
acdCfmSlmHistResultTxSlm Counter32,
|
|
acdCfmSlmHistResultRxSlr Counter32,
|
|
acdCfmSlmHistResultRemoteRxSlm Counter32,
|
|
acdCfmSlmHistResultNearEndRatio Gauge32,
|
|
acdCfmSlmHistResultFarEndRatio Gauge32,
|
|
acdCfmSlmHistResultNbrGaps Counter32,
|
|
acdCfmSlmHistResultLargestGap Counter32,
|
|
acdCfmSlmHistResultInstanceIndex Unsigned32
|
|
|
|
}
|
|
|
|
acdCfmSlmHistResultID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SLM instance. This
|
|
value follows the ordering of the SLM table."
|
|
::= { acdCfmSlmHistResultEntry 1 }
|
|
|
|
|
|
acdCfmSlmHistResultPeriodIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies the particular sample this entry
|
|
represents among all samples associated with the same PL instance.
|
|
This index starts at 1 and increases by one as each new period."
|
|
::= { acdCfmSlmHistResultEntry 2 }
|
|
|
|
acdCfmSlmHistResultIntervalEnd OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time of the end of the period."
|
|
::= { acdCfmSlmHistResultEntry 3 }
|
|
|
|
acdCfmSlmHistResultTxSlm OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLM frames sent."
|
|
::= { acdCfmSlmHistResultEntry 4 }
|
|
|
|
acdCfmSlmHistResultRxSlr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLR frames received."
|
|
::= { acdCfmSlmHistResultEntry 5 }
|
|
|
|
acdCfmSlmHistResultRemoteRxSlm OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of SLM frames received at the far end."
|
|
::= { acdCfmSlmHistResultEntry 6 }
|
|
|
|
acdCfmSlmHistResultNearEndRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the packet loss ratio at the near end."
|
|
::= { acdCfmSlmHistResultEntry 7 }
|
|
|
|
acdCfmSlmHistResultFarEndRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the packet loss ratio at the far end."
|
|
::= { acdCfmSlmHistResultEntry 8 }
|
|
|
|
acdCfmSlmHistResultNbrGaps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of gap."
|
|
::= { acdCfmSlmHistResultEntry 9 }
|
|
|
|
acdCfmSlmHistResultLargestGap OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the largest gap."
|
|
::= { acdCfmSlmHistResultEntry 10 }
|
|
|
|
acdCfmSlmHistResultInstanceIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance index."
|
|
::= { acdCfmSlmHistResultEntry 11 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The MEP Transmit Statistics table
|
|
-- This table contains all transmit statistics related to all MEP entries.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmMepStatsTxTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmMepStatsTxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Statictics table of all MEP entries."
|
|
::= { acdCfmMep 2 }
|
|
|
|
acdCfmMepStatsTxEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmMepStatsTxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all transmit statistics related to a MEP entry."
|
|
INDEX { acdCfmMepStatsTxID }
|
|
::= { acdCfmMepStatsTxTable 1 }
|
|
|
|
AcdCfmMepStatsTxEntry ::= SEQUENCE {
|
|
acdCfmMepStatsTxID Unsigned32,
|
|
acdCfmMepStatsTxCcmPdu Counter64,
|
|
acdCfmMepStatsTxLbmPdu Counter64,
|
|
acdCfmMepStatsTxLbrPdu Counter64,
|
|
acdCfmMepStatsTxLtmPdu Counter64,
|
|
acdCfmMepStatsTxLtrPdu Counter64,
|
|
acdCfmMepStatsTxAisPdu Counter64,
|
|
acdCfmMepStatsTxLckPdu Counter64,
|
|
acdCfmMepStatsTxTstPdu Counter64,
|
|
acdCfmMepStatsTxLinearApsPdu Counter64,
|
|
acdCfmMepStatsTxRingApsPdu Counter64,
|
|
acdCfmMepStatsTxMccPdu Counter64,
|
|
acdCfmMepStatsTxLmmPdu Counter64,
|
|
acdCfmMepStatsTxLmrPdu Counter64,
|
|
acdCfmMepStatsTx1dmPdu Counter64,
|
|
acdCfmMepStatsTxDmmPdu Counter64,
|
|
acdCfmMepStatsTxDmrPdu Counter64,
|
|
acdCfmMepStatsTxExmPdu Counter64,
|
|
acdCfmMepStatsTxExrPdu Counter64,
|
|
acdCfmMepStatsTxVsmPdu Counter64,
|
|
acdCfmMepStatsTxVsrPdu Counter64,
|
|
acdCfmMepStatsTxCsfPdu Counter64,
|
|
acdCfmMepStatsTxSlmPdu Counter64,
|
|
acdCfmMepStatsTxSlrPdu Counter64
|
|
}
|
|
|
|
acdCfmMepStatsTxID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each MEP instance. This value follows the ordering
|
|
of the MEP table."
|
|
::= { acdCfmMepStatsTxEntry 1 }
|
|
|
|
acdCfmMepStatsTxCcmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Continuity Check Message (CCM)
|
|
PDU transmitted by the MEP (OpCode 1)."
|
|
::= { acdCfmMepStatsTxEntry 2 }
|
|
|
|
acdCfmMepStatsTxLbmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of LoopBack Message (LBM)
|
|
PDU transmitted by the MEP (OpCode 3)."
|
|
::= { acdCfmMepStatsTxEntry 3 }
|
|
|
|
acdCfmMepStatsTxLbrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of LoopBack Reply (LBR)
|
|
PDU transmitted by the MEP (OpCode 2)."
|
|
::= { acdCfmMepStatsTxEntry 4 }
|
|
|
|
acdCfmMepStatsTxLtmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Link Trace Message (LTM)
|
|
PDU transmitted by the MEP (OpCode 5)."
|
|
::= { acdCfmMepStatsTxEntry 5 }
|
|
|
|
acdCfmMepStatsTxLtrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Link Trace Reply (LTR)
|
|
PDU transmitted by the MEP (OpCode 4)."
|
|
::= { acdCfmMepStatsTxEntry 6 }
|
|
|
|
acdCfmMepStatsTxAisPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Alarm Indication Signal (AIS)
|
|
PDU transmitted by the MEP (OpCode 33)."
|
|
::= { acdCfmMepStatsTxEntry 7 }
|
|
|
|
acdCfmMepStatsTxLckPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Locked (LCK) PDU transmitted
|
|
by the MEP (OpCode 35)."
|
|
::= { acdCfmMepStatsTxEntry 8 }
|
|
|
|
acdCfmMepStatsTxTstPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Test (TST) PDU transmitted by
|
|
the MEP (OpCode 37)."
|
|
::= { acdCfmMepStatsTxEntry 9 }
|
|
|
|
acdCfmMepStatsTxLinearApsPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of linear Automatic Protection Switching
|
|
(APS) PDU transmitted by the MEP (OpCode 39)."
|
|
::= { acdCfmMepStatsTxEntry 10 }
|
|
|
|
acdCfmMepStatsTxRingApsPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of ring Automatic Protection Switching
|
|
(APS) PDU transmitted by the MEP (OpCode 40)."
|
|
::= { acdCfmMepStatsTxEntry 11 }
|
|
|
|
acdCfmMepStatsTxMccPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Maintenance Communication
|
|
Channel (MCC) PDU transmitted by the MEP (OpCode 41)."
|
|
::= { acdCfmMepStatsTxEntry 12 }
|
|
|
|
acdCfmMepStatsTxLmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Loss Measurement Message (LMM)
|
|
PDU transmitted by the MEP (OpCode 43)."
|
|
::= { acdCfmMepStatsTxEntry 13 }
|
|
|
|
acdCfmMepStatsTxLmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Loss Measurement Reply (LMR)
|
|
PDU transmitted by the MEP (OpCode 42)."
|
|
::= { acdCfmMepStatsTxEntry 14 }
|
|
|
|
acdCfmMepStatsTx1dmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of One-way Delay Measurement (1DM)
|
|
PDU transmitted by the MEP (OpCode 45)."
|
|
::= { acdCfmMepStatsTxEntry 15 }
|
|
|
|
acdCfmMepStatsTxDmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Message (DMM)
|
|
PDU transmitted by the MEP (OpCode 47)."
|
|
::= { acdCfmMepStatsTxEntry 16 }
|
|
|
|
acdCfmMepStatsTxDmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Reply (DMR)
|
|
PDU transmitted by the MEP (OpCode 46)."
|
|
::= { acdCfmMepStatsTxEntry 17 }
|
|
|
|
acdCfmMepStatsTxExmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of EXperimental Message (EXM)
|
|
PDU transmitted by the MEP (OpCode 49)."
|
|
::= { acdCfmMepStatsTxEntry 18 }
|
|
|
|
acdCfmMepStatsTxExrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of EXperimental Reply (EXR)
|
|
PDU transmitted by the MEP (OpCode 48)."
|
|
::= { acdCfmMepStatsTxEntry 19 }
|
|
|
|
acdCfmMepStatsTxVsmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Vendor Specific Message (VSM)
|
|
PDU transmitted by the MEP (OpCode 51)."
|
|
::= { acdCfmMepStatsTxEntry 20 }
|
|
|
|
acdCfmMepStatsTxVsrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Vendor Specific Reply (VSR)
|
|
PDU transmitted by the MEP (OpCode 50)."
|
|
::= { acdCfmMepStatsTxEntry 21 }
|
|
|
|
acdCfmMepStatsTxCsfPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Client Signal Fail (CSF)
|
|
PDU transmitted by the MEP (OpCode 52)."
|
|
::= { acdCfmMepStatsTxEntry 22 }
|
|
|
|
acdCfmMepStatsTxSlmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Synthetic Loss Message (SLM)
|
|
PDU transmitted by the MEP (OpCode 55)."
|
|
::= { acdCfmMepStatsTxEntry 23 }
|
|
|
|
acdCfmMepStatsTxSlrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Synthetic Loss Reply (SLR)
|
|
PDU transmitted by the MEP (OpCode 54)."
|
|
::= { acdCfmMepStatsTxEntry 24 }
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The MEP Receive Statistics table
|
|
-- This table contains all receive statistics related to all MEP entries.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmMepStatsRxTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmMepStatsRxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Statictics table of all MEP entries."
|
|
::= { acdCfmMep 3 }
|
|
|
|
acdCfmMepStatsRxEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmMepStatsRxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all receive statistics related to a MEP entry."
|
|
INDEX { acdCfmMepStatsRxID }
|
|
::= { acdCfmMepStatsRxTable 1 }
|
|
|
|
AcdCfmMepStatsRxEntry ::= SEQUENCE {
|
|
acdCfmMepStatsRxID Unsigned32,
|
|
acdCfmMepStatsRxCcmPdu Counter64,
|
|
acdCfmMepStatsRxLbmPdu Counter64,
|
|
acdCfmMepStatsRxLbrPdu Counter64,
|
|
acdCfmMepStatsRxLtmPdu Counter64,
|
|
acdCfmMepStatsRxLtrPdu Counter64,
|
|
acdCfmMepStatsRxAisPdu Counter64,
|
|
acdCfmMepStatsRxLckPdu Counter64,
|
|
acdCfmMepStatsRxTstPdu Counter64,
|
|
acdCfmMepStatsRxLinearApsPdu Counter64,
|
|
acdCfmMepStatsRxRingApsPdu Counter64,
|
|
acdCfmMepStatsRxMccPdu Counter64,
|
|
acdCfmMepStatsRxLmmPdu Counter64,
|
|
acdCfmMepStatsRxLmrPdu Counter64,
|
|
acdCfmMepStatsRx1dmPdu Counter64,
|
|
acdCfmMepStatsRxDmmPdu Counter64,
|
|
acdCfmMepStatsRxDmrPdu Counter64,
|
|
acdCfmMepStatsRxExmPdu Counter64,
|
|
acdCfmMepStatsRxExrPdu Counter64,
|
|
acdCfmMepStatsRxVsmPdu Counter64,
|
|
acdCfmMepStatsRxVsrPdu Counter64,
|
|
|
|
acdCfmMepStatsRxCcmSeqErrors Counter64,
|
|
acdCfmMepStatsRxLtrUnexpectedPdu Counter64,
|
|
acdCfmMepStatsRxLtrMacErrors Counter64,
|
|
acdCfmMepStatsRxLbrOooErrors Counter64,
|
|
acdCfmMepStatsRxLbrUnexpectedPdu Counter64,
|
|
acdCfmMepStatsRxLbrDataErrors Counter64,
|
|
acdCfmMepStatsRxCsfPdu Counter64,
|
|
acdCfmMepStatsRxSlmPdu Counter64,
|
|
acdCfmMepStatsRxSlrPdu Counter64
|
|
}
|
|
|
|
acdCfmMepStatsRxID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { acdCfmMepStatsRxEntry 1 }
|
|
|
|
acdCfmMepStatsRxCcmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Continuity Check Message (CCM)
|
|
PDU received by the MEP (OpCode 1)."
|
|
::= { acdCfmMepStatsRxEntry 2 }
|
|
|
|
acdCfmMepStatsRxLbmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of LoopBack Message (LBM)
|
|
PDU received by the MEP (OpCode 3)."
|
|
::= { acdCfmMepStatsRxEntry 3 }
|
|
|
|
acdCfmMepStatsRxLbrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of LoopBack Reply (LBR)
|
|
PDU received by the MEP (OpCode 2)."
|
|
::= { acdCfmMepStatsRxEntry 4 }
|
|
|
|
acdCfmMepStatsRxLtmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Link Trace Message (LTM)
|
|
PDU received by the MEP (OpCode 5)."
|
|
::= { acdCfmMepStatsRxEntry 5 }
|
|
|
|
acdCfmMepStatsRxLtrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Link Trace Reply (LTR)
|
|
PDU received by the MEP (OpCode 4)."
|
|
::= { acdCfmMepStatsRxEntry 6 }
|
|
|
|
acdCfmMepStatsRxAisPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Alarm Indication Signal (AIS)
|
|
PDU received by the MEP (OpCode 33)."
|
|
::= { acdCfmMepStatsRxEntry 7 }
|
|
|
|
acdCfmMepStatsRxLckPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Locked (LCK) PDU received
|
|
by the MEP (OpCode 35)."
|
|
::= { acdCfmMepStatsRxEntry 8 }
|
|
|
|
acdCfmMepStatsRxTstPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Test (TST) PDU received by
|
|
the MEP (OpCode 37)."
|
|
::= { acdCfmMepStatsRxEntry 9 }
|
|
|
|
acdCfmMepStatsRxLinearApsPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of linear Automatic Protection Switching
|
|
(APS) PDU received by the MEP (OpCode 39)."
|
|
::= { acdCfmMepStatsRxEntry 10 }
|
|
|
|
acdCfmMepStatsRxRingApsPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of ring Automatic Protection Switching
|
|
(APS) PDU received by the MEP (OpCode 40)."
|
|
::= { acdCfmMepStatsRxEntry 11 }
|
|
|
|
acdCfmMepStatsRxMccPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Maintenance Communication
|
|
Channel (MCC) PDU received by the MEP (OpCode 41)."
|
|
::= { acdCfmMepStatsRxEntry 12 }
|
|
|
|
acdCfmMepStatsRxLmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Loss Measurement Message (LMM)
|
|
PDU received by the MEP (OpCode 43)."
|
|
::= { acdCfmMepStatsRxEntry 13 }
|
|
|
|
acdCfmMepStatsRxLmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Loss Measurement Reply (LMR)
|
|
PDU received by the MEP (OpCode 42)."
|
|
::= { acdCfmMepStatsRxEntry 14 }
|
|
|
|
acdCfmMepStatsRx1dmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of One-way Delay Measurement (1DM)
|
|
PDU received by the MEP (OpCode 45)."
|
|
::= { acdCfmMepStatsRxEntry 15 }
|
|
|
|
acdCfmMepStatsRxDmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Message (DMM)
|
|
PDU received by the MEP (OpCode 47)."
|
|
::= { acdCfmMepStatsRxEntry 16 }
|
|
|
|
acdCfmMepStatsRxDmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Reply (DMR)
|
|
PDU received by the MEP (OpCode 46)."
|
|
::= { acdCfmMepStatsRxEntry 17 }
|
|
|
|
acdCfmMepStatsRxExmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of EXperimental Message (EXM)
|
|
PDU received by the MEP (OpCode 49)."
|
|
::= { acdCfmMepStatsRxEntry 18 }
|
|
|
|
acdCfmMepStatsRxExrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of EXperimental Reply (EXR)
|
|
PDU received by the MEP (OpCode 48)."
|
|
::= { acdCfmMepStatsRxEntry 19 }
|
|
|
|
acdCfmMepStatsRxVsmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Vendor Specific Message (VSM)
|
|
PDU received by the MEP (OpCode 51)."
|
|
::= { acdCfmMepStatsRxEntry 20 }
|
|
|
|
acdCfmMepStatsRxVsrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Vendor Specific Reply (VSR)
|
|
PDU received by the MEP (OpCode 50)."
|
|
::= { acdCfmMepStatsRxEntry 21 }
|
|
|
|
acdCfmMepStatsRxCcmSeqErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of out-of-sequence CCMs received from all remote
|
|
MEPs."
|
|
::= { acdCfmMepStatsRxEntry 22 }
|
|
|
|
acdCfmMepStatsRxLtrUnexpectedPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTRs received when no linktrace request is active
|
|
for that MEP."
|
|
::= { acdCfmMepStatsRxEntry 23 }
|
|
|
|
acdCfmMepStatsRxLtrMacErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link Trace Replies dropped because of bad MAC
|
|
address."
|
|
::= { acdCfmMepStatsRxEntry 24 }
|
|
|
|
acdCfmMepStatsRxLbrOooErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of valid, out-of-order Loopback Replies received."
|
|
::= { acdCfmMepStatsRxEntry 25 }
|
|
|
|
acdCfmMepStatsRxLbrUnexpectedPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBRs received when no loopback request is active
|
|
for that MEP."
|
|
::= { acdCfmMepStatsRxEntry 26 }
|
|
|
|
acdCfmMepStatsRxLbrDataErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBRs received whose MACService Data Unit did not
|
|
match (except for the OpCode) that of the corresponding LBM."
|
|
::= { acdCfmMepStatsRxEntry 27 }
|
|
|
|
acdCfmMepStatsRxCsfPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Client Signal Fail (CSF)
|
|
PDU received by the MEP (OpCode 52)."
|
|
::= { acdCfmMepStatsRxEntry 28 }
|
|
|
|
acdCfmMepStatsRxSlmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Synthetic Loss Message (SLM)
|
|
PDU received by the MEP (OpCode 55)."
|
|
::= { acdCfmMepStatsRxEntry 29 }
|
|
|
|
acdCfmMepStatsRxSlrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Synthetic Loss Reply (SLR)
|
|
PDU received by the MEP (OpCode 54)."
|
|
::= { acdCfmMepStatsRxEntry 30 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The DMM/DMR Statistics table
|
|
-- This table contains all DMM/DMR statistics related to a MEP entry.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmMepDmStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmMepDmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit DMM/DMR statictics per priority table for a MEP entry."
|
|
::= { acdCfmMep 4 }
|
|
|
|
acdCfmMepDmStatsEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmMepDmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all DMM/DMR statistics related to a MEP entry."
|
|
INDEX { acdCfmMepDmStatsID, acdCfmMepDmStatsPriority }
|
|
::= { acdCfmMepDmStatsTable 1 }
|
|
|
|
AcdCfmMepDmStatsEntry ::= SEQUENCE {
|
|
acdCfmMepDmStatsID Unsigned32,
|
|
acdCfmMepDmStatsPriority Unsigned32,
|
|
acdCfmMepDmStatsTxDmmPdu Counter64,
|
|
acdCfmMepDmStatsRxDmmPdu Counter64,
|
|
acdCfmMepDmStatsTxDmrPdu Counter64,
|
|
acdCfmMepDmStatsRxDmrPdu Counter64
|
|
}
|
|
|
|
acdCfmMepDmStatsID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each MEP instance. This value follows the ordering
|
|
of the MEP table. Same as acdCfmMepStatsTxID and acdCfmMepStatsRxID."
|
|
::= { acdCfmMepDmStatsEntry 1 }
|
|
|
|
acdCfmMepDmStatsPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each priority level."
|
|
::= { acdCfmMepDmStatsEntry 2 }
|
|
|
|
acdCfmMepDmStatsTxDmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Message (DMM)
|
|
(OpCode 47) PDU transmitted by the MEP for this specific priority level."
|
|
::= { acdCfmMepDmStatsEntry 3 }
|
|
|
|
acdCfmMepDmStatsRxDmmPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Message (DMM)
|
|
(OpCode 47) PDU received by the MEP for this specific priority level."
|
|
::= { acdCfmMepDmStatsEntry 4 }
|
|
|
|
acdCfmMepDmStatsTxDmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Reply (DMR)
|
|
(OpCode 46) PDU transmitted by the MEP for this specific priority level."
|
|
::= { acdCfmMepDmStatsEntry 5 }
|
|
|
|
acdCfmMepDmStatsRxDmrPdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of Delay Measurement Reply (DMR)
|
|
(OpCode 46) PDU received by the MEP for this specific priority level."
|
|
::= { acdCfmMepDmStatsEntry 6 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Configuration manager Stack Table...
|
|
-- This table ties some information together
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmStackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration table of stack entries."
|
|
::= { acdCfmStack 1 }
|
|
|
|
acdCfmStackEntry OBJECT-TYPE
|
|
SYNTAX AcdCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all informations to tie together."
|
|
INDEX { acdCfmMdIdx, acdCfmMaIdx, acdCfmMepID}
|
|
::= { acdCfmStackTable 1 }
|
|
|
|
AcdCfmStackEntry ::= SEQUENCE {
|
|
acdCfmMdIdx Unsigned32,
|
|
acdCfmMaIdx Unsigned32,
|
|
acdCfmMepID Unsigned32,
|
|
acdCfmMepIdx Unsigned32
|
|
}
|
|
|
|
acdCfmMdIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance Domain(MD) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB."
|
|
::= { acdCfmStackEntry 1 }
|
|
|
|
acdCfmMaIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance Association(MA) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB."
|
|
::= { acdCfmStackEntry 2 }
|
|
|
|
acdCfmMepID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance End Point(Mep) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB."
|
|
::= { acdCfmStackEntry 3 }
|
|
|
|
acdCfmMepIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance End Point(Mep) index from table acdCfmDmCfgTable in ACD-CFM-MIB."
|
|
::= { acdCfmStackEntry 4 }
|
|
|
|
|
|
--------------------------------------------------------------------------
|
|
-- ACD-CFM-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmCompliances OBJECT IDENTIFIER ::= { acdCfmConformance 1 }
|
|
acdCfmGroups OBJECT IDENTIFIER ::= { acdCfmConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdCfmDmCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmDmCfgRowStatus,
|
|
acdCfmDmCfgMepIdx,
|
|
acdCfmDmCfgRemoteMepId,
|
|
acdCfmDmCfgPriority,
|
|
acdCfmDmCfgEnable,
|
|
acdCfmDmCfgInterval,
|
|
acdCfmDmCfgRefPeriod,
|
|
acdCfmDmCfgOneWayDelayEnable,
|
|
acdCfmDmCfgOneWayDelayMax,
|
|
acdCfmDmCfgOneWayDelayThresh,
|
|
acdCfmDmCfgOneWayAvgDelayThresh,
|
|
acdCfmDmCfgOneWayDvEnable,
|
|
acdCfmDmCfgOneWayDvMax,
|
|
acdCfmDmCfgOneWayDvThresh,
|
|
acdCfmDmCfgOneWayAvgDvThresh,
|
|
acdCfmDmCfgTwoWayDelayEnable,
|
|
acdCfmDmCfgTwoWayDelayMax,
|
|
acdCfmDmCfgTwoWayDelayThresh,
|
|
acdCfmDmCfgTwoWayAvgDelayThresh,
|
|
acdCfmDmCfgTwoWayDvEnable,
|
|
acdCfmDmCfgTwoWayDvMax,
|
|
acdCfmDmCfgTwoWayDvThresh,
|
|
acdCfmDmCfgTwoWayAvgDvThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Delay Measurement configuration Group."
|
|
::= { acdCfmGroups 1 }
|
|
|
|
acdCfmResultOneWayDelayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmResultOneWayDelayPeriodIndex,
|
|
acdCfmResultOneWayDelayIntervalStart,
|
|
acdCfmResultOneWayDelayValid,
|
|
acdCfmResultOneWayDelayAlert,
|
|
acdCfmResultOneWayDelayAvgAlert,
|
|
acdCfmResultOneWayDelaySamples,
|
|
acdCfmResultOneWayDelayMinValue,
|
|
acdCfmResultOneWayDelayMaxValue,
|
|
acdCfmResultOneWayDelayAvgValue,
|
|
acdCfmResultOneWayDelayThreshExc,
|
|
acdCfmResultOneWayDelayInstValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the One Way Delay result Group."
|
|
::= { acdCfmGroups 2 }
|
|
|
|
acdCfmResultOneWayDvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmResultOneWayDvPeriodIndex,
|
|
acdCfmResultOneWayDvIntervalStart,
|
|
acdCfmResultOneWayDvValid,
|
|
acdCfmResultOneWayDvAlert,
|
|
acdCfmResultOneWayDvAvgAlert,
|
|
acdCfmResultOneWayDvSamples,
|
|
acdCfmResultOneWayDvMinValue,
|
|
acdCfmResultOneWayDvMaxValue,
|
|
acdCfmResultOneWayDvAvgValue,
|
|
acdCfmResultOneWayDvThreshExc,
|
|
acdCfmResultOneWayDvInstValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the One Way Delay variation result Group."
|
|
::= { acdCfmGroups 3 }
|
|
|
|
acdCfmResultTwoWayDelayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmResultTwoWayDelayPeriodIndex,
|
|
acdCfmResultTwoWayDelayIntervalStart,
|
|
acdCfmResultTwoWayDelayValid,
|
|
acdCfmResultTwoWayDelayAlert,
|
|
acdCfmResultTwoWayDelayAvgAlert,
|
|
acdCfmResultTwoWayDelaySamples,
|
|
acdCfmResultTwoWayDelayMinValue,
|
|
acdCfmResultTwoWayDelayMaxValue,
|
|
acdCfmResultTwoWayDelayAvgValue,
|
|
acdCfmResultTwoWayDelayThreshExc,
|
|
acdCfmResultTwoWayDelayInstValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Two Way Delay result Group."
|
|
::= { acdCfmGroups 4 }
|
|
|
|
acdCfmResultTwoWayDvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmResultTwoWayDvPeriodIndex,
|
|
acdCfmResultTwoWayDvIntervalStart,
|
|
acdCfmResultTwoWayDvValid,
|
|
acdCfmResultTwoWayDvAlert,
|
|
acdCfmResultTwoWayDvAvgAlert,
|
|
acdCfmResultTwoWayDvSamples,
|
|
acdCfmResultTwoWayDvMinValue,
|
|
acdCfmResultTwoWayDvMaxValue,
|
|
acdCfmResultTwoWayDvAvgValue,
|
|
acdCfmResultTwoWayDvThreshExc,
|
|
acdCfmResultTwoWayDvInstValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Two Way Delay varition result Group."
|
|
::= { acdCfmGroups 5 }
|
|
|
|
acdCfmHistResultOneWayDelayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmHistResultOneWayDelayStatus,
|
|
acdCfmHistResultOneWayDelayDuration,
|
|
acdCfmHistResultOneWayDelayIntervalEnd,
|
|
acdCfmHistResultOneWayDelaySamples,
|
|
acdCfmHistResultOneWayDelayMinValue,
|
|
acdCfmHistResultOneWayDelayMaxValue,
|
|
acdCfmHistResultOneWayDelayAvgValue,
|
|
acdCfmHistResultOneWayDelayThreshExc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the One Way Delay history result Group."
|
|
::= { acdCfmGroups 6 }
|
|
|
|
acdCfmHistResultOneWayDvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmHistResultOneWayDvStatus,
|
|
acdCfmHistResultOneWayDvDuration,
|
|
acdCfmHistResultOneWayDvIntervalEnd,
|
|
acdCfmHistResultOneWayDvSamples,
|
|
acdCfmHistResultOneWayDvMinValue,
|
|
acdCfmHistResultOneWayDvMaxValue,
|
|
acdCfmHistResultOneWayDvAvgValue,
|
|
acdCfmHistResultOneWayDvThreshExc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the One Way Delay variation history result Group."
|
|
::= { acdCfmGroups 7 }
|
|
|
|
acdCfmHistResultTwoWayDelayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmHistResultTwoWayDelayStatus,
|
|
acdCfmHistResultTwoWayDelayDuration,
|
|
acdCfmHistResultTwoWayDelayIntervalEnd,
|
|
acdCfmHistResultTwoWayDelaySamples,
|
|
acdCfmHistResultTwoWayDelayMinValue,
|
|
acdCfmHistResultTwoWayDelayMaxValue,
|
|
acdCfmHistResultTwoWayDelayAvgValue,
|
|
acdCfmHistResultTwoWayDelayThreshExc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Two Way Delay history result Group."
|
|
::= { acdCfmGroups 8 }
|
|
|
|
acdCfmHistResultTwoWayDvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmHistResultTwoWayDvStatus,
|
|
acdCfmHistResultTwoWayDvDuration,
|
|
acdCfmHistResultTwoWayDvIntervalEnd,
|
|
acdCfmHistResultTwoWayDvSamples,
|
|
acdCfmHistResultTwoWayDvMinValue,
|
|
acdCfmHistResultTwoWayDvMaxValue,
|
|
acdCfmHistResultTwoWayDvAvgValue,
|
|
acdCfmHistResultTwoWayDvThreshExc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Two Way Delay variation history result Group."
|
|
::= { acdCfmGroups 9 }
|
|
|
|
|
|
acdCfmPktLossCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmPktLossCfgRowStatus,
|
|
acdCfmPktLossCfgMepIdx,
|
|
acdCfmPktLossCfgRemoteMepId,
|
|
acdCfmPktLossCfgPriority,
|
|
acdCfmPktLossCfgEnable,
|
|
acdCfmPktLossCfgInterval,
|
|
acdCfmPktLossCfgRefPeriod,
|
|
acdCfmPktLossCfgThresh,
|
|
acdCfmPktLossCfgRatioThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for Packet loss configuration Group."
|
|
::= { acdCfmGroups 10 }
|
|
|
|
acdCfmResultPktLossGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmResultPktLossPeriodIndex,
|
|
acdCfmResultPktLossIntervalStart,
|
|
acdCfmResultPktLossValid,
|
|
acdCfmResultPktLossAlert,
|
|
acdCfmResultPktLossSamples,
|
|
acdCfmResultPktLossOverflowSamples,
|
|
acdCfmResultPktLossHCSamples,
|
|
acdCfmResultPktLossNbrLoss,
|
|
acdCfmResultPktLossOverflowNbrLoss,
|
|
acdCfmResultPktLossHCNbrLoss,
|
|
acdCfmResultPktLossNbrGaps,
|
|
acdCfmResultPktLossOverflowNbrGaps,
|
|
acdCfmResultPktLossHCNbrGaps,
|
|
acdCfmResultPktLossLargestGap,
|
|
acdCfmResultPktLossOverflowLargestGap,
|
|
acdCfmResultPktLossHCLargestGap,
|
|
acdCfmResultPktLossRatio
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for Packet loss result Group."
|
|
::= { acdCfmGroups 11 }
|
|
|
|
acdCfmHistResultPktLossGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmHistResultPktLossStatus,
|
|
acdCfmHistResultPktLossDuration,
|
|
acdCfmHistResultPktLossIntervalEnd,
|
|
acdCfmHistResultPktLossSamples,
|
|
acdCfmHistResultPktLossOverflowSamples,
|
|
acdCfmHistResultPktLossHCSamples,
|
|
acdCfmHistResultPktLossNbrLoss,
|
|
acdCfmHistResultPktLossOverflowNbrLoss,
|
|
acdCfmHistResultPktLossHCNbrLoss,
|
|
acdCfmHistResultPktLossNbrGaps,
|
|
acdCfmHistResultPktLossOverflowNbrGaps,
|
|
acdCfmHistResultPktLossHCNbrGaps,
|
|
acdCfmHistResultPktLossLargestGap,
|
|
acdCfmHistResultPktLossOverflowLargestGap,
|
|
acdCfmHistResultPktLossHCLargestGap,
|
|
acdCfmHistResultPktLossRatio
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for Packet loss history result Group."
|
|
::= { acdCfmGroups 12 }
|
|
|
|
acdCfmMepStatsTxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmMepStatsTxCcmPdu,
|
|
acdCfmMepStatsTxLbmPdu,
|
|
acdCfmMepStatsTxLbrPdu,
|
|
acdCfmMepStatsTxLtmPdu,
|
|
acdCfmMepStatsTxLtrPdu,
|
|
acdCfmMepStatsTxAisPdu,
|
|
acdCfmMepStatsTxLckPdu,
|
|
acdCfmMepStatsTxTstPdu,
|
|
acdCfmMepStatsTxLinearApsPdu,
|
|
acdCfmMepStatsTxRingApsPdu,
|
|
acdCfmMepStatsTxMccPdu,
|
|
acdCfmMepStatsTxLmmPdu,
|
|
acdCfmMepStatsTxLmrPdu,
|
|
acdCfmMepStatsTx1dmPdu,
|
|
acdCfmMepStatsTxDmmPdu,
|
|
acdCfmMepStatsTxDmrPdu,
|
|
acdCfmMepStatsTxExmPdu,
|
|
acdCfmMepStatsTxExrPdu,
|
|
acdCfmMepStatsTxVsmPdu,
|
|
acdCfmMepStatsTxVsrPdu,
|
|
acdCfmMepStatsTxCsfPdu,
|
|
acdCfmMepStatsTxSlmPdu,
|
|
acdCfmMepStatsTxSlrPdu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for MEP transmit statistics Group."
|
|
::= { acdCfmGroups 13 }
|
|
|
|
acdCfmMepStatsRxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmMepStatsRxCcmPdu,
|
|
acdCfmMepStatsRxLbmPdu,
|
|
acdCfmMepStatsRxLbrPdu,
|
|
acdCfmMepStatsRxLtmPdu,
|
|
acdCfmMepStatsRxLtrPdu,
|
|
acdCfmMepStatsRxAisPdu,
|
|
acdCfmMepStatsRxLckPdu,
|
|
acdCfmMepStatsRxTstPdu,
|
|
acdCfmMepStatsRxLinearApsPdu,
|
|
acdCfmMepStatsRxRingApsPdu,
|
|
acdCfmMepStatsRxMccPdu,
|
|
acdCfmMepStatsRxLmmPdu,
|
|
acdCfmMepStatsRxLmrPdu,
|
|
acdCfmMepStatsRx1dmPdu,
|
|
acdCfmMepStatsRxDmmPdu,
|
|
acdCfmMepStatsRxDmrPdu,
|
|
acdCfmMepStatsRxExmPdu,
|
|
acdCfmMepStatsRxExrPdu,
|
|
acdCfmMepStatsRxVsmPdu,
|
|
acdCfmMepStatsRxVsrPdu,
|
|
acdCfmMepStatsRxCcmSeqErrors,
|
|
acdCfmMepStatsRxLtrUnexpectedPdu,
|
|
acdCfmMepStatsRxLtrMacErrors,
|
|
acdCfmMepStatsRxLbrOooErrors,
|
|
acdCfmMepStatsRxLbrUnexpectedPdu,
|
|
acdCfmMepStatsRxLbrDataErrors,
|
|
acdCfmMepStatsRxCsfPdu,
|
|
acdCfmMepStatsRxSlrPdu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for MEP receive statistics Group."
|
|
::= { acdCfmGroups 14 }
|
|
|
|
acdCfmMepDmStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmMepDmStatsTxDmmPdu,
|
|
acdCfmMepDmStatsRxDmmPdu,
|
|
acdCfmMepDmStatsTxDmrPdu,
|
|
acdCfmMepDmStatsRxDmrPdu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for DMM/DMR MEP statistics Group."
|
|
::= { acdCfmGroups 15 }
|
|
|
|
acdCfmMepStackGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmMepIdx
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for cfm Stack Group."
|
|
::= { acdCfmGroups 16 }
|
|
|
|
acdCfmMepSlmStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmMepStatsTxSlmPdu,
|
|
acdCfmMepStatsRxSlmPdu,
|
|
acdCfmMepStatsTxSlrPdu,
|
|
acdCfmMepStatsRxSlrPdu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for SLM/SLR MEP statistics Group."
|
|
::= { acdCfmGroups 17 }
|
|
|
|
acdCfmSlmCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmSlmCfgRowStatus,
|
|
acdCfmSlmCfgMepIdx,
|
|
acdCfmSlmCfgRemoteMepId,
|
|
acdCfmSlmCfgPriority,
|
|
acdCfmSlmCfgState,
|
|
acdCfmSlmCfgInterval,
|
|
acdCfmSlmCfgRefPeriod,
|
|
acdCfmSlmCfgNearEndThresh,
|
|
acdCfmSlmCfgFarEndThresh,
|
|
acdCfmSlmCfgName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for SLM configuration Group."
|
|
::= { acdCfmGroups 18 }
|
|
|
|
acdCfmSlmResultGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmSlmResultPeriodIndex,
|
|
acdCfmSlmResultIntervalStart,
|
|
acdCfmSlmResultValid,
|
|
acdCfmSlmResultNearEndAlert,
|
|
acdCfmSlmResultFarEndAlert,
|
|
acdCfmSlmResultTxSlm,
|
|
acdCfmSlmResultRxSlr,
|
|
acdCfmSlmResultRemoteRxSlm,
|
|
acdCfmSlmResultNearEndNbrLoss,
|
|
acdCfmSlmResultFarEndNbrLoss,
|
|
acdCfmSlmResultNearEndRatio,
|
|
acdCfmSlmResultFarEndRatio,
|
|
acdCfmSlmResultNbrGaps,
|
|
acdCfmSlmResultLargestGap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for SLM result Group."
|
|
::= { acdCfmGroups 19 }
|
|
|
|
acdCfmSlmHistResultGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdCfmSlmHistResultPeriodIndex,
|
|
acdCfmSlmHistResultIntervalEnd,
|
|
acdCfmSlmHistResultTxSlm,
|
|
acdCfmSlmHistResultRxSlr,
|
|
acdCfmSlmHistResultRemoteRxSlm,
|
|
acdCfmSlmHistResultNearEndRatio,
|
|
acdCfmSlmHistResultFarEndRatio,
|
|
acdCfmSlmHistResultNbrGaps,
|
|
acdCfmSlmHistResultLargestGap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for SLM history result Group."
|
|
::= { acdCfmGroups 20 }
|
|
|
|
acdCfmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-CFM-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdCfmDmCfgGroup,
|
|
acdCfmResultOneWayDelayGroup,
|
|
acdCfmResultOneWayDvGroup,
|
|
acdCfmResultTwoWayDelayGroup,
|
|
acdCfmResultTwoWayDvGroup,
|
|
acdCfmHistResultOneWayDelayGroup,
|
|
acdCfmHistResultOneWayDvGroup,
|
|
acdCfmHistResultTwoWayDelayGroup,
|
|
acdCfmHistResultTwoWayDvGroup,
|
|
acdCfmPktLossCfgGroup,
|
|
acdCfmResultPktLossGroup,
|
|
acdCfmHistResultPktLossGroup,
|
|
acdCfmMepStatsTxGroup,
|
|
acdCfmMepStatsRxGroup,
|
|
acdCfmMepDmStatsGroup,
|
|
acdCfmMepStackGroup,
|
|
acdCfmMepSlmStatsGroup,
|
|
acdCfmSlmCfgGroup,
|
|
acdCfmSlmResultGroup,
|
|
acdCfmSlmHistResultGroup
|
|
}
|
|
|
|
OBJECT acdCfmDmCfgRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdCfmPktLossCfgRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdCfmSlmCfgRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
::= { acdCfmCompliances 1 }
|
|
END
|
|
|