mibs/MIBS/adtran/ADTRAN-AOS-NETWORKMONITOR
2023-12-05 12:25:34 +01:00

3804 lines
141 KiB
Plaintext

ADTRAN-AOS-NETWORKMONITOR DEFINITIONS ::= BEGIN
IMPORTS
TimeTicks, IpAddress, Integer32, Unsigned32, Counter32,
Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
adIdentity
FROM ADTRAN-MIB
adGenAOSConformance, adGenAOSRouter
FROM ADTRAN-AOS;
adGenAOSNetMonMib MODULE-IDENTITY
LAST-UPDATED "201010270000Z" -- Oct 27, 2010 / YYYYMMDDHHMMZ
ORGANIZATION "ADTRAN, Inc."
CONTACT-INFO
"Technical Support Dept.
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"This MIB contains network monitoring information."
REVISION "201010270000Z" -- Oct 27, 2010 / YYYYMMDDHHMMZ
DESCRIPTION
"Added adGenAOSnmTrackTraps and a limited RO adGenAOSnmTrackTable
to allow OID support for the adGenAOSnmTrackStateChgFail
and adGenAOSnmTrackStateChgPass trap additions.
Changes by Joe Sieja."
REVISION "200901200000Z" -- Jan 20, 2009 / YYYYMMDDHHMMZ
DESCRIPTION
"Added adGenAOSnmICMPTSPktSentCount to the
adGenAOSnmICMPTSHistoryTable and adGenAOSnmTwPktSentCount to
the adGenAOSnmTwampHistoryTable.
Changes by Reba Holland."
REVISION "200809300000Z" -- Sept 30, 2008 / YYYYMMDDHHMMZ
DESCRIPTION
"Added adGenAOSnmICMPTSResponderStatsTable and
adGenAOSnmTWAMPResponderStatsTable. These tables will be used
to retrieve the statistics available for enabled responders.
Changes by Reba Holland."
REVISION "200808120000Z" -- Aug 12, 2008 / YYYYMMDDHHMMZ
DESCRIPTION
"Changed adGenAOSNetMon to use adGenAOSnmIndex in all
tables that were using adGenAOSnmName. Added ICMP Timestamp
and TWAMP responders. Removed adGenAOSnmICMPTSHistoryIndex and
adGenAOSnmTwHistoryIndex from the adGenAOSnmICMPTSHistoryTable
and adGenAOSnmTwampHistoryTable. Using adGenAOSnmICMPTsSeqNum
and adGenAOSnmTwSeqNum as indices in these tables instead.
Added adGenAOSnmProbeTableNextIndex. Changed adGenAOSnmIndex
to have a maximum value of 1000.
Changes by Reba Holland."
REVISION "200806250000Z" -- June 25, 2008 / YYYYMMDDHHMMZ
DESCRIPTION
"Changed adGenAOSNetMon to be under the adGenAOSRouter tree
instead of the adGenAOSCommon tree.
Changes by Reba Holland."
REVISION "200708230000Z" -- August 23, 2007
DESCRIPTION
"First Draft of ADTRAN-AOS-NETWORKMONITOR MIB module."
::= { adIdentity 10000 53 2 2 }
adGenAOSNetMon OBJECT IDENTIFIER ::= { adGenAOSRouter 2 }
-- ========================================================================
adGenAOSnmTrackTraps OBJECT IDENTIFIER ::= { adGenAOSNetMon 0 }
adGenAOSnmProbeTableNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for adGenAOSnmIndex in
the adGenAOSnmProbeTable, or a zero to indicate that none exist."
::= { adGenAOSNetMon 1 }
--
-- Network Monitor Probe Table
-- The variables that create a NetMon probe.
adGenAOSnmProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Create a network monitor probe."
::= { adGenAOSNetMon 2 }
adGenAOSnmProbeEntry OBJECT-TYPE
SYNTAX AdGenAOSnmProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters for a particular network monitor probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmProbeTable 1 }
AdGenAOSnmProbeEntry ::=
SEQUENCE {
adGenAOSnmIndex Integer32,
adGenAOSnmName OCTET STRING,
adGenAOSnmType INTEGER,
adGenAOSnmRowStatus RowStatus
}
adGenAOSnmIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uniquely identifies a row in the adGenAOSnmProbeTable.
This is the index chosen by the management station for
row creation. If the adGenAOSnmIndex is already in use when
attempting to create a new row with a set operation, then an
error will be returned."
::= { adGenAOSnmProbeEntry 1 }
adGenAOSnmName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique string to identify probe."
::= { adGenAOSnmProbeEntry 2 }
adGenAOSnmType OBJECT-TYPE
SYNTAX INTEGER {
icmpEcho (1),
tcpConnect (2),
httpRequest (3),
icmpTimeStamp (4),
twamp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of probe."
::= { adGenAOSnmProbeEntry 3 }
adGenAOSnmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMP Version 2 Row Status Variable. The status of the conceptual
row. In order for this object to become active, the following
row objects MUST be defined: adGenAOSnmName and adGenAOSnmType.
The control row objects adGenAOSnmName and adGenAOSnmType cannot be
modified once this conceptual row has been created. The value
'notInService' and 'createAndWait' will not be supported. This
object can be set to 'destroy' from any value at any time."
::= { adGenAOSnmProbeEntry 4 }
--
-- Network Monitor Configure Probe Table
-- The variables that configure a NetMon probe.
adGenAOSnmConfigProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmConfigProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure a network monitor probe."
::= { adGenAOSNetMon 3 }
adGenAOSnmConfigProbeEntry OBJECT-TYPE
SYNTAX AdGenAOSnmConfigProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters used to configure a particular network monitor
probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmConfigProbeTable 1 }
AdGenAOSnmConfigProbeEntry ::=
SEQUENCE {
adGenAOSnmCfgName OCTET STRING,
adGenAOSnmAdminStatus INTEGER,
adGenAOSnmPollPeriod Integer32,
adGenAOSnmTimeoutPeriod Unsigned32,
adGenAOSnmToleranceMode INTEGER,
adGenAOSnmFailTolerance INTEGER,
adGenAOSnmPassTolerance INTEGER,
adGenAOSnmToleranceTestSize INTEGER,
adGenAOSnmClearCounters INTEGER
}
adGenAOSnmCfgName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding probe entry. The probe identified by
a particular value of this index is the same probe as identified
by the same value as a adGenAOSnmName object instance."
::= { adGenAOSnmConfigProbeEntry 1 }
adGenAOSnmAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies ability to enable or disable the probe."
::= { adGenAOSnmConfigProbeEntry 2 }
adGenAOSnmPollPeriod OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the poll period, in seconds, of the probe."
::= { adGenAOSnmConfigProbeEntry 3 }
adGenAOSnmTimeoutPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to wait for a response after which a packet is considered
lost."
::= { adGenAOSnmConfigProbeEntry 4 }
adGenAOSnmToleranceMode OBJECT-TYPE
SYNTAX INTEGER
{
none (1),
rate (2),
consecutive (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the tolerance mode of the probe."
::= { adGenAOSnmConfigProbeEntry 5 }
adGenAOSnmFailTolerance OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how many probe operations must fail before the probe
state transitions to the fail state."
::= { adGenAOSnmConfigProbeEntry 6 }
adGenAOSnmPassTolerance OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how many probe operations must fail before the probe
state transitions to the fail state."
::= { adGenAOSnmConfigProbeEntry 7 }
adGenAOSnmToleranceTestSize OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies test size for rate calculations when the tolerance mode
is set to 'rate'."
::= { adGenAOSnmConfigProbeEntry 8 }
adGenAOSnmClearCounters OBJECT-TYPE
SYNTAX INTEGER {
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters and statistics history of a probe.
This is a write-only variable. A read will result in no action
being taken."
::= { adGenAOSnmConfigProbeEntry 9 }
--
-- Network Monitor Probe Status Table
-- The variables that display the status of a NetMon probe.
adGenAOSnmProbeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmProbeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"View the status of a network monitor probe."
::= { adGenAOSNetMon 4 }
adGenAOSnmProbeStatusEntry OBJECT-TYPE
SYNTAX AdGenAOSnmProbeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters used to view the status of a particular network
monitor probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmProbeStatusTable 1 }
AdGenAOSnmProbeStatusEntry ::=
SEQUENCE {
adGenAOSnmStatusName OCTET STRING,
adGenAOSnmTestStatus INTEGER,
adGenAOSnmTestsRun Counter32,
adGenAOSnmTestsFailed Counter32,
adGenAOSnmStatsToleranceTestSize Counter32,
adGenAOSnmStatsToleranceTestValue Counter32,
adGenAOSnmTimeSinceLastStatusChange TimeTicks
}
adGenAOSnmStatusName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding probe entry. The probe identified by
a particular value of this index is the same probe as identified
by the same value as a adGenAOSnmName object instance."
::= { adGenAOSnmProbeStatusEntry 1 }
adGenAOSnmTestStatus OBJECT-TYPE
SYNTAX INTEGER
{
fail (1),
pass (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current test state of the probe."
::= { adGenAOSnmProbeStatusEntry 2 }
adGenAOSnmTestsRun OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of test run on the probe."
::= { adGenAOSnmProbeStatusEntry 3 }
adGenAOSnmTestsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of test that failed."
::= { adGenAOSnmProbeStatusEntry 4 }
adGenAOSnmStatsToleranceTestSize OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the test size."
::= { adGenAOSnmProbeStatusEntry 5 }
adGenAOSnmStatsToleranceTestValue OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies number of tests that passed or failed.
Check 'adGenAOSnmTestStatus' for test state."
::= { adGenAOSnmProbeStatusEntry 6 }
adGenAOSnmTimeSinceLastStatusChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since last status change."
::= { adGenAOSnmProbeStatusEntry 7 }
--
-- Network Monitor Configure TWAMP Probe Table
-- Used to configure TWAMP-specific probe parameters.
adGenAOSnmCfgTwampProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmCfgTwampProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure a network monitor TWAMP probe."
::= { adGenAOSNetMon 5 }
adGenAOSnmCfgTwampProbeEntry OBJECT-TYPE
SYNTAX AdGenAOSnmCfgTwampProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters used to configure a particular network monitor
TWAMP probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmCfgTwampProbeTable 1 }
AdGenAOSnmCfgTwampProbeEntry ::=
SEQUENCE {
adGenAOSnmCfgTwName OCTET STRING,
adGenAOSnmTwDestHostname DisplayString,
adGenAOSnmTwDestPort INTEGER,
adGenAOSnmTwSrcIP IpAddress,
adGenAOSnmTwSrcPort INTEGER,
adGenAOSnmTwDscp INTEGER,
adGenAOSnmTwPaddingLen INTEGER,
adGenAOSnmTwPaddingFormat INTEGER,
adGenAOSnmTwPaddingPattern OCTET STRING,
adGenAOSnmTwDataPadType INTEGER,
adGenAOSnmTwPktSendCnt INTEGER,
adGenAOSnmTwSendScheduleType INTEGER,
adGenAOSnmTwSendScheduleValue INTEGER,
adGenAOSnmTwIpdvAbsInMinFail Unsigned32,
adGenAOSnmTwIpdvAbsInAvgFail Unsigned32,
adGenAOSnmTwIpdvAbsInMaxFail Unsigned32,
adGenAOSnmTwIpdvAbsInMinPass Unsigned32,
adGenAOSnmTwIpdvAbsInAvgPass Unsigned32,
adGenAOSnmTwIpdvAbsInMaxPass Unsigned32,
adGenAOSnmTwIpdvAbsOutMinFail Unsigned32,
adGenAOSnmTwIpdvAbsOutAvgFail Unsigned32,
adGenAOSnmTwIpdvAbsOutMaxFail Unsigned32,
adGenAOSnmTwIpdvAbsOutMinPass Unsigned32,
adGenAOSnmTwIpdvAbsOutAvgPass Unsigned32,
adGenAOSnmTwIpdvAbsOutMaxPass Unsigned32,
adGenAOSnmTwIpdvAbsRtMinFail Unsigned32,
adGenAOSnmTwIpdvAbsRtAvgFail Unsigned32,
adGenAOSnmTwIpdvAbsRtMaxFail Unsigned32,
adGenAOSnmTwIpdvAbsRtMinPass Unsigned32,
adGenAOSnmTwIpdvAbsRtAvgPass Unsigned32,
adGenAOSnmTwIpdvAbsRtMaxPass Unsigned32,
adGenAOSnmTwDelayInMinFail Integer32,
adGenAOSnmTwDelayInAvgFail Integer32,
adGenAOSnmTwDelayInMaxFail Integer32,
adGenAOSnmTwDelayInMinPass Integer32,
adGenAOSnmTwDelayInAvgPass Integer32,
adGenAOSnmTwDelayInMaxPass Integer32,
adGenAOSnmTwDelayOutMinFail Integer32,
adGenAOSnmTwDelayOutAvgFail Integer32,
adGenAOSnmTwDelayOutMaxFail Integer32,
adGenAOSnmTwDelayOutMinPass Integer32,
adGenAOSnmTwDelayOutAvgPass Integer32,
adGenAOSnmTwDelayOutMaxPass Integer32,
adGenAOSnmTwDelayRtMinFail Integer32,
adGenAOSnmTwDelayRtAvgFail Integer32,
adGenAOSnmTwDelayRtMaxFail Integer32,
adGenAOSnmTwDelayRtMinPass Integer32,
adGenAOSnmTwDelayRtAvgPass Integer32,
adGenAOSnmTwDelayRtMaxPass Integer32,
adGenAOSnmTwPktRtLossFail INTEGER ,
adGenAOSnmTwPktRtLossPass INTEGER ,
adGenAOSnmTwHistoryDepth INTEGER
}
adGenAOSnmCfgTwName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding TWAMP probe entry. The probe
identified by a particular instance of this object is the same
probe as identified by the same value as a adGenAOSnmName
object instance."
::= { adGenAOSnmCfgTwampProbeEntry 1 }
adGenAOSnmTwDestHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the destination hostname or IP address as a string in
dotted decimal format."
::= { adGenAOSnmCfgTwampProbeEntry 2 }
adGenAOSnmTwDestPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the destination port. If zero then the actual destination
port will be dynamically negotiated with the responder."
::= { adGenAOSnmCfgTwampProbeEntry 3 }
adGenAOSnmTwSrcIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the source IPv4 address."
::= { adGenAOSnmCfgTwampProbeEntry 4 }
adGenAOSnmTwSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the source port. If zero then the actual source port will
be dynamically assigned ever probe operation."
::= { adGenAOSnmCfgTwampProbeEntry 5 }
adGenAOSnmTwDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the DiffServ Code Point value that will be used on
packets sent and will be negotiated with the responder."
::= { adGenAOSnmCfgTwampProbeEntry 6 }
adGenAOSnmTwPaddingLen OBJECT-TYPE
SYNTAX INTEGER (0..1462)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Size of TWAMP padding length."
::= { adGenAOSnmCfgTwampProbeEntry 7 }
adGenAOSnmTwPaddingFormat OBJECT-TYPE
SYNTAX INTEGER
{
ascii (1),
hex (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the format of the padding pattern."
::= { adGenAOSnmCfgTwampProbeEntry 8 }
adGenAOSnmTwPaddingPattern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies data pattern to pad the packet. This can be an ascii
or hexadecimal pattern and must match the type set in
adGenAOSnmTwPktFormat. In addition, adGenAOSnmTwDataPadType must be
set to 'custom'. "
::= { adGenAOSnmCfgTwampProbeEntry 9 }
adGenAOSnmTwDataPadType OBJECT-TYPE
SYNTAX INTEGER
{
zeroes (1),
random (2),
custom (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the TWAMP padding payload is filled."
::= { adGenAOSnmCfgTwampProbeEntry 10 }
adGenAOSnmTwPktSendCnt OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of packets to send and receive for one probe
operation. More than one is required for inter-packet delay
variation measurements."
::= { adGenAOSnmCfgTwampProbeEntry 11 }
adGenAOSnmTwSendScheduleType OBJECT-TYPE
SYNTAX INTEGER {
periodic (1),
poisson (2) -- for future use, not currently supported
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies in milliseconds the time between test packets during a
single probe operation."
::= { adGenAOSnmCfgTwampProbeEntry 12 }
adGenAOSnmTwSendScheduleValue OBJECT-TYPE
SYNTAX INTEGER (5..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies in milliseconds the time between start of each packet
send operation."
::= { adGenAOSnmCfgTwampProbeEntry 13 }
adGenAOSnmTwIpdvAbsInMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 14 }
adGenAOSnmTwIpdvAbsInAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 15 }
adGenAOSnmTwIpdvAbsInMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 16 }
adGenAOSnmTwIpdvAbsInMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 17 }
adGenAOSnmTwIpdvAbsInAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 18 }
adGenAOSnmTwIpdvAbsInMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 19 }
adGenAOSnmTwIpdvAbsOutMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum outbound absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 20 }
adGenAOSnmTwIpdvAbsOutAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average outbound absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 21 }
adGenAOSnmTwIpdvAbsOutMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum outbound absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 22 }
adGenAOSnmTwIpdvAbsOutMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 23 }
adGenAOSnmTwIpdvAbsOutAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 24 }
adGenAOSnmTwIpdvAbsOutMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 25 }
adGenAOSnmTwIpdvAbsRtMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum round-trip absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 26 }
adGenAOSnmTwIpdvAbsRtAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average round-trip absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 27 }
adGenAOSnmTwIpdvAbsRtMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum round-trip absolute-value inter-packet
delay variation threshold in milliseconds that will cause the
probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 28 }
adGenAOSnmTwIpdvAbsRtMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 29 }
adGenAOSnmTwIpdvAbsRtAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 30 }
adGenAOSnmTwIpdvAbsRtMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 31 }
adGenAOSnmTwDelayInMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum inbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 32 }
adGenAOSnmTwDelayInAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average inbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 33 }
adGenAOSnmTwDelayInMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum inbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 34 }
adGenAOSnmTwDelayInMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 35 }
adGenAOSnmTwDelayInAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 36 }
adGenAOSnmTwDelayInMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 37 }
adGenAOSnmTwDelayOutMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum outbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 38 }
adGenAOSnmTwDelayOutAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average outbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 39 }
adGenAOSnmTwDelayOutMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum outbound delay threshold in milliseconds that
will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 40 }
adGenAOSnmTwDelayOutMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 41 }
adGenAOSnmTwDelayOutAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 42 }
adGenAOSnmTwDelayOutMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 43 }
adGenAOSnmTwDelayRtMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 44 }
adGenAOSnmTwDelayRtAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 45 }
adGenAOSnmTwDelayRtMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 46 }
adGenAOSnmTwDelayRtMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 47 }
adGenAOSnmTwDelayRtAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 48 }
adGenAOSnmTwDelayRtMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgTwampProbeEntry 49 }
adGenAOSnmTwPktRtLossFail OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the round-trip packet-loss threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgTwampProbeEntry 50 }
adGenAOSnmTwPktRtLossPass OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the round-trip packet-loss threshold in milliseconds
that will allow the probe operation to change to the pass state."
::= { adGenAOSnmCfgTwampProbeEntry 51 }
adGenAOSnmTwHistoryDepth OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of probe operation statistic results to keep."
::= { adGenAOSnmCfgTwampProbeEntry 52 }
--
-- Network Monitor TWAMP History Table
-- The variables that display the history for a NetMon TWAMP probe.
adGenAOSnmTwampHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmTwampHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operation history for a network monitor TWAMP probe."
::= { adGenAOSNetMon 6 }
adGenAOSnmTwampHistoryEntry OBJECT-TYPE
SYNTAX AdGenAOSnmTwampHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The read-only history of a particular network monitor TWAMP probe."
INDEX { adGenAOSnmIndex, adGenAOSnmTwSeqNum }
::= { adGenAOSnmTwampHistoryTable 1 }
AdGenAOSnmTwampHistoryEntry ::=
SEQUENCE {
adGenAOSnmTwSeqNum Integer32,
adGenAOSnmTwHistoryName OCTET STRING,
adGenAOSnmTwStartTime DisplayString,
adGenAOSnmTwEndTime DisplayString,
adGenAOSnmTwLocalSyncState TruthValue,
adGenAOSnmTwLocalClkErr Counter64,
adGenAOSnmTwRemoteSyncState TruthValue,
adGenAOSnmTwRemoteClkErr Counter64,
adGenAOSnmTwDelayInMin Integer32,
adGenAOSnmTwDelayInMax Integer32,
adGenAOSnmTwDelayOutMin Integer32,
adGenAOSnmTwDelayOutMax Integer32,
adGenAOSnmTwDelayRtMin Integer32,
adGenAOSnmTwDelayRtMax Integer32,
adGenAOSnmTwLossRoundTrip Counter32,
adGenAOSnmTwDelayOutSum Integer32,
adGenAOSnmTwDelayOutSum2 Counter64,
adGenAOSnmTwDelayOutNum Counter32,
adGenAOSnmTwDelayInSum Integer32,
adGenAOSnmTwDelayInSum2 Counter64,
adGenAOSnmTwDelayInNum Counter32,
adGenAOSnmTwDelayRtSum Integer32,
adGenAOSnmTwDelayRtSum2 Counter64,
adGenAOSnmTwDelayRtNum Counter32,
adGenAOSnmTwIpvPosInMin Counter32,
adGenAOSnmTwIpvPosInMax Counter32,
adGenAOSnmTwIpvPosInSum Counter32,
adGenAOSnmTwIpvPosInSum2 Counter64,
adGenAOSnmTwIpvPosInNum Counter32,
adGenAOSnmTwIpvPosOutMin Counter32,
adGenAOSnmTwIpvPosOutMax Counter32,
adGenAOSnmTwIpvPosOutSum Counter32,
adGenAOSnmTwIpvPosOutSum2 Counter64,
adGenAOSnmTwIpvPosOutNum Counter32,
adGenAOSnmTwIpvPosRtMin Counter32,
adGenAOSnmTwIpvPosRtMax Counter32,
adGenAOSnmTwIpvPosRtSum Counter32,
adGenAOSnmTwIpvPosRtSum2 Counter64,
adGenAOSnmTwIpvPosRtNum Counter32,
adGenAOSnmTwIpvNegInMin Counter32,
adGenAOSnmTwIpvNegInMax Counter32,
adGenAOSnmTwIpvNegInSum Counter32,
adGenAOSnmTwIpvNegInSum2 Counter64,
adGenAOSnmTwIpvNegInNum Counter32,
adGenAOSnmTwIpvNegOutMin Counter32,
adGenAOSnmTwIpvNegOutMax Counter32,
adGenAOSnmTwIpvNegOutSum Counter32,
adGenAOSnmTwIpvNegOutSum2 Counter64,
adGenAOSnmTwIpvNegOutNum Counter32,
adGenAOSnmTwIpvNegRtMin Counter32,
adGenAOSnmTwIpvNegRtMax Counter32,
adGenAOSnmTwIpvNegRtSum Counter32,
adGenAOSnmTwIpvNegRtSum2 Counter64,
adGenAOSnmTwIpvNegRtNum Counter32,
adGenAOSnmTwIpvAbsInMin Counter32,
adGenAOSnmTwIpvAbsInMax Counter32,
adGenAOSnmTwIpvAbsInSum Counter32,
adGenAOSnmTwIpvAbsInSum2 Counter64,
adGenAOSnmTwIpvAbsInNum Counter32,
adGenAOSnmTwIpvAbsOutMin Counter32,
adGenAOSnmTwIpvAbsOutMax Counter32,
adGenAOSnmTwIpvAbsOutSum Counter32,
adGenAOSnmTwIpvAbsOutSum2 Counter64,
adGenAOSnmTwIpvAbsOutNum Counter32,
adGenAOSnmTwIpvAbsRtMin Counter32,
adGenAOSnmTwIpvAbsRtMax Counter32,
adGenAOSnmTwIpvAbsRtSum Counter32,
adGenAOSnmTwIpvAbsRtSum2 Counter64,
adGenAOSnmTwIpvAbsRtNum Counter32,
adGenAOSnmTwPktSentCount Counter32
}
adGenAOSnmTwSeqNum OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Along with adGenAOSnmTwHistoryName, uniquely identifies a
row in the adGenAOSTwampHistoryTable. A sequence number of
'1' signifies the current history entry."
::= { adGenAOSnmTwampHistoryEntry 1 }
adGenAOSnmTwHistoryName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding TWAMP probe entry. The probe
identified by a particular value of this object is the same probe as
identified by the same value as a adGenAOSnmName object instance."
::= { adGenAOSnmTwampHistoryEntry 2 }
adGenAOSnmTwStartTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time the probe operation started."
::= { adGenAOSnmTwampHistoryEntry 3 }
adGenAOSnmTwEndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time the probe operation ended."
::= { adGenAOSnmTwampHistoryEntry 4 }
adGenAOSnmTwLocalSyncState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If return value is true, local clock is in sync."
::= { adGenAOSnmTwampHistoryEntry 5 }
adGenAOSnmTwLocalClkErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local clock error estimate in nanoseconds."
::= { adGenAOSnmTwampHistoryEntry 6 }
adGenAOSnmTwRemoteSyncState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If return value is true, remote clock is in sync."
::= { adGenAOSnmTwampHistoryEntry 7 }
adGenAOSnmTwRemoteClkErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote clock error estimate in nanoseconds."
::= { adGenAOSnmTwampHistoryEntry 8 }
adGenAOSnmTwDelayInMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inbound minimum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 9 }
adGenAOSnmTwDelayInMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inbound maximum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 10 }
adGenAOSnmTwDelayOutMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The outbound minimum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 11 }
adGenAOSnmTwDelayOutMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The outbound maximum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 12 }
adGenAOSnmTwDelayRtMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip minimum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 13 }
adGenAOSnmTwDelayRtMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip maximum delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 14 }
adGenAOSnmTwLossRoundTrip OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip packet loss."
::= { adGenAOSnmTwampHistoryEntry 15 }
adGenAOSnmTwDelayOutSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of outbound delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 16 }
adGenAOSnmTwDelayOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of outbound delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 17 }
adGenAOSnmTwDelayOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual outbound delay samples."
::= { adGenAOSnmTwampHistoryEntry 18 }
adGenAOSnmTwDelayInSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of inbound delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 19 }
adGenAOSnmTwDelayInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of inbound delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 20 }
adGenAOSnmTwDelayInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual inbound delay samples."
::= { adGenAOSnmTwampHistoryEntry 21 }
adGenAOSnmTwDelayRtSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of round-trip delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 22 }
adGenAOSnmTwDelayRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of round-trip delay in milliseconds."
::= { adGenAOSnmTwampHistoryEntry 23 }
adGenAOSnmTwDelayRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual round-trip delay samples."
::= { adGenAOSnmTwampHistoryEntry 24 }
adGenAOSnmTwIpvPosInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 25 }
adGenAOSnmTwIpvPosInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 26 }
adGenAOSnmTwIpvPosInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 27 }
adGenAOSnmTwIpvPosInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 28 }
adGenAOSnmTwIpvPosInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 29 }
adGenAOSnmTwIpvPosOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 30 }
adGenAOSnmTwIpvPosOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 31 }
adGenAOSnmTwIpvPosOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 32 }
adGenAOSnmTwIpvPosOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 33 }
adGenAOSnmTwIpvPosOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 34 }
adGenAOSnmTwIpvPosRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 35 }
adGenAOSnmTwIpvPosRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 36 }
adGenAOSnmTwIpvPosRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 37 }
adGenAOSnmTwIpvPosRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of of positive round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 38 }
adGenAOSnmTwIpvPosRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 39 }
adGenAOSnmTwIpvNegInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 40 }
adGenAOSnmTwIpvNegInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 41 }
adGenAOSnmTwIpvNegInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 42 }
adGenAOSnmTwIpvNegInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 43 }
adGenAOSnmTwIpvNegInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 44 }
adGenAOSnmTwIpvNegOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 45 }
adGenAOSnmTwIpvNegOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 46 }
adGenAOSnmTwIpvNegOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 47 }
adGenAOSnmTwIpvNegOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 48 }
adGenAOSnmTwIpvNegOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 49 }
adGenAOSnmTwIpvNegRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 50 }
adGenAOSnmTwIpvNegRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 51 }
adGenAOSnmTwIpvNegRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 52 }
adGenAOSnmTwIpvNegRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 53 }
adGenAOSnmTwIpvNegRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 54 }
adGenAOSnmTwIpvAbsInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 55 }
adGenAOSnmTwIpvAbsInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 56 }
adGenAOSnmTwIpvAbsInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 57 }
adGenAOSnmTwIpvAbsInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute inbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 58 }
adGenAOSnmTwIpvAbsInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute inbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 59 }
adGenAOSnmTwIpvAbsOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 60 }
adGenAOSnmTwIpvAbsOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 61 }
adGenAOSnmTwIpvAbsOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 62 }
adGenAOSnmTwIpvAbsOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute outbound inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 63 }
adGenAOSnmTwIpvAbsOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute outbound inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 64 }
adGenAOSnmTwIpvAbsRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 65 }
adGenAOSnmTwIpvAbsRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 66 }
adGenAOSnmTwIpvAbsRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 67 }
adGenAOSnmTwIpvAbsRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmTwampHistoryEntry 68 }
adGenAOSnmTwIpvAbsRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmTwampHistoryEntry 69 }
adGenAOSnmTwPktSentCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent."
::= { adGenAOSnmTwampHistoryEntry 70 }
--
-- Network Monitor Configure ICMP Timestamp Probe Table
-- The variables that configure a NetMon ICMP Timestamp probe.
adGenAOSnmCfgICMPTSProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmCfgICMPTSProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure a network monitor ICMP timestamp probe."
::= { adGenAOSNetMon 7 }
adGenAOSnmCfgICMPTSProbeEntry OBJECT-TYPE
SYNTAX AdGenAOSnmCfgICMPTSProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters used to configure a particular network monitor ICMP
timestamp probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmCfgICMPTSProbeTable 1 }
AdGenAOSnmCfgICMPTSProbeEntry ::=
SEQUENCE {
adGenAOSnmCfgICMPTSName OCTET STRING,
adGenAOSnmICMPTSDestHostname DisplayString,
adGenAOSnmICMPTSSrcIP IpAddress,
adGenAOSnmICMPTSDscp INTEGER,
adGenAOSnmICMPTSPaddingLen INTEGER,
adGenAOSnmICMPTSPaddingFormat INTEGER,
adGenAOSnmICMPTSPaddingPattern OCTET STRING,
adGenAOSnmICMPTSDataPadType INTEGER,
adGenAOSnmICMPTSPktSendCnt INTEGER,
adGenAOSnmICMPTSSendScheduleType INTEGER,
adGenAOSnmICMPTSSendScheduleValue INTEGER,
adGenAOSnmICMPTSIpdvAbsInMinFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsInAvgFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsInMaxFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsInMinPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsInAvgPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsInMaxPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutMinFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutAvgFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutMaxFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutMinPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutAvgPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsOutMaxPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtMinFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtAvgFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtMaxFail Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtMinPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtAvgPass Unsigned32,
adGenAOSnmICMPTSIpdvAbsRtMaxPass Unsigned32,
adGenAOSnmICMPTSDelayInMinFail Integer32,
adGenAOSnmICMPTSDelayInAvgFail Integer32,
adGenAOSnmICMPTSDelayInMaxFail Integer32,
adGenAOSnmICMPTSDelayInMinPass Integer32,
adGenAOSnmICMPTSDelayInAvgPass Integer32,
adGenAOSnmICMPTSDelayInMaxPass Integer32,
adGenAOSnmICMPTSDelayOutMinFail Integer32,
adGenAOSnmICMPTSDelayOutAvgFail Integer32,
adGenAOSnmICMPTSDelayOutMaxFail Integer32,
adGenAOSnmICMPTSDelayOutMinPass Integer32,
adGenAOSnmICMPTSDelayOutAvgPass Integer32,
adGenAOSnmICMPTSDelayOutMaxPass Integer32,
adGenAOSnmICMPTSDelayRtMinFail Integer32,
adGenAOSnmICMPTSDelayRtAvgFail Integer32,
adGenAOSnmICMPTSDelayRtMaxFail Integer32,
adGenAOSnmICMPTSDelayRtMinPass Integer32,
adGenAOSnmICMPTSDelayRtAvgPass Integer32,
adGenAOSnmICMPTSDelayRtMaxPass Integer32,
adGenAOSnmICMPTSPktRtLossFail INTEGER,
adGenAOSnmICMPTSPktRtLossPass INTEGER,
adGenAOSnmICMPTSHistoryDepth INTEGER
}
adGenAOSnmCfgICMPTSName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding ICMP timestamp probe entry.
The probe identified by a particular value of this object is the
same probe as identified by the same value as a
adGenAOSnmName object instance."
::= { adGenAOSnmCfgICMPTSProbeEntry 1 }
adGenAOSnmICMPTSDestHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the destination hostname or IP address as a string in
dotted decimal format."
::= { adGenAOSnmCfgICMPTSProbeEntry 2 }
adGenAOSnmICMPTSSrcIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the source IPv4 address."
::= { adGenAOSnmCfgICMPTSProbeEntry 3 }
adGenAOSnmICMPTSDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the DiffServ Code Point value that will be used on
packets sent and will be negotiated with the responder."
::= { adGenAOSnmCfgICMPTSProbeEntry 4 }
adGenAOSnmICMPTSPaddingLen OBJECT-TYPE
SYNTAX INTEGER (0..1462)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Size of ICMP padding length."
::= { adGenAOSnmCfgICMPTSProbeEntry 5 }
adGenAOSnmICMPTSPaddingFormat OBJECT-TYPE
SYNTAX INTEGER
{
ascii (1),
hex (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the format of the padding pattern."
::= { adGenAOSnmCfgICMPTSProbeEntry 6 }
adGenAOSnmICMPTSPaddingPattern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies data pattern to pad the packet. This can be an ascii or
hexadecimal pattern and must match the type set in
adGenAOSnmICMPTSPktFormat. In addition, adGenAOSnmICMPTSDataPadType
must be set to 'custom'. "
::= { adGenAOSnmCfgICMPTSProbeEntry 7 }
adGenAOSnmICMPTSDataPadType OBJECT-TYPE
SYNTAX INTEGER
{
zeroes (1),
random (2),
custom (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the ICMP padding paylod is filled."
::= { adGenAOSnmCfgICMPTSProbeEntry 8 }
adGenAOSnmICMPTSPktSendCnt OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of packets to send and receive for one probe
operation. More than one is required for inter-packet delay
variation measurements."
::= { adGenAOSnmCfgICMPTSProbeEntry 9 }
adGenAOSnmICMPTSSendScheduleType OBJECT-TYPE
SYNTAX INTEGER {
periodic (1),
poisson (2) -- for future use, not currently supported
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies in milliseconds the time between test packets during a
single probe operation."
::= { adGenAOSnmCfgICMPTSProbeEntry 10 }
adGenAOSnmICMPTSSendScheduleValue OBJECT-TYPE
SYNTAX INTEGER (5..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies in milliseconds the time between start of each packet
send operation."
::= { adGenAOSnmCfgICMPTSProbeEntry 11 }
adGenAOSnmICMPTSIpdvAbsInMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 12 }
adGenAOSnmICMPTSIpdvAbsInAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 13 }
adGenAOSnmICMPTSIpdvAbsInMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum inbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 14 }
adGenAOSnmICMPTSIpdvAbsInMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 15 }
adGenAOSnmICMPTSIpdvAbsInAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 16 }
adGenAOSnmICMPTSIpdvAbsInMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum inbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 17 }
adGenAOSnmICMPTSIpdvAbsOutMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum outbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 18 }
adGenAOSnmICMPTSIpdvAbsOutAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average outbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 19 }
adGenAOSnmICMPTSIpdvAbsOutMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum outbound absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 20 }
adGenAOSnmICMPTSIpdvAbsOutMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 21 }
adGenAOSnmICMPTSIpdvAbsOutAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 22 }
adGenAOSnmICMPTSIpdvAbsOutMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum outbound
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 23 }
adGenAOSnmICMPTSIpdvAbsRtMinFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum round-trip absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 24 }
adGenAOSnmICMPTSIpdvAbsRtAvgFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average round-trip absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 25 }
adGenAOSnmICMPTSIpdvAbsRtMaxFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum round-trip absolute-value inter-packet delay
variation threshold in milliseconds that will cause the probe
operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 26 }
adGenAOSnmICMPTSIpdvAbsRtMinPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 27 }
adGenAOSnmICMPTSIpdvAbsRtAvgPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 28 }
adGenAOSnmICMPTSIpdvAbsRtMaxPass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum round-trip
absolute-value inter-packet delay variation that will allow the
probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 29 }
adGenAOSnmICMPTSDelayInMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum inbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 30 }
adGenAOSnmICMPTSDelayInAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average inbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 31 }
adGenAOSnmICMPTSDelayInMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum inbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 32 }
adGenAOSnmICMPTSDelayInMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 33 }
adGenAOSnmICMPTSDelayInAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 34 }
adGenAOSnmICMPTSDelayInMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum inbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 35 }
adGenAOSnmICMPTSDelayOutMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum outbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 36 }
adGenAOSnmICMPTSDelayOutAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average outbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 37 }
adGenAOSnmICMPTSDelayOutMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum outbound delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 38 }
adGenAOSnmICMPTSDelayOutMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 39 }
adGenAOSnmICMPTSDelayOutAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 40 }
adGenAOSnmICMPTSDelayOutMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum outbound delay
that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 41 }
adGenAOSnmICMPTSDelayRtMinFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 42 }
adGenAOSnmICMPTSDelayRtAvgFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the average round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 43 }
adGenAOSnmICMPTSDelayRtMaxFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum round-trip delay threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 44 }
adGenAOSnmICMPTSDelayRtMinPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for minimum round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 45 }
adGenAOSnmICMPTSDelayRtAvgPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for average round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 46 }
adGenAOSnmICMPTSDelayRtMaxPass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the threshold in milliseconds for maximum round-trip
delay that will allow the probe operation to pass."
::= { adGenAOSnmCfgICMPTSProbeEntry 47 }
adGenAOSnmICMPTSPktRtLossFail OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the round-trip packet-loss threshold in milliseconds
that will cause the probe operation to fail."
::= { adGenAOSnmCfgICMPTSProbeEntry 48 }
adGenAOSnmICMPTSPktRtLossPass OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the round-trip packet-loss threshold in milliseconds
that will allow the probe operation to change to the pass state."
::= { adGenAOSnmCfgICMPTSProbeEntry 49 }
adGenAOSnmICMPTSHistoryDepth OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of probe operation statistic results to keep."
::= { adGenAOSnmCfgICMPTSProbeEntry 50 }
--
-- Network Monitor ICMP timestamp History Table
-- The variables that display the history for a NetMon ICMP timestamp
-- probe.
adGenAOSnmICMPTSHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmICMPTSHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operation history for a network monitor ICMP timestamp probe."
::= { adGenAOSNetMon 8 }
adGenAOSnmICMPTSHistoryEntry OBJECT-TYPE
SYNTAX AdGenAOSnmICMPTSHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The read-only history of a particular network monitor ICMP
timestamp probe."
INDEX { adGenAOSnmIndex, adGenAOSnmICMPTSSeqNum }
::= { adGenAOSnmICMPTSHistoryTable 1 }
AdGenAOSnmICMPTSHistoryEntry ::=
SEQUENCE {
adGenAOSnmICMPTSSeqNum Integer32,
adGenAOSnmICMPTSHistoryName OCTET STRING,
adGenAOSnmICMPTSStartTime DisplayString,
adGenAOSnmICMPTSEndTime DisplayString,
adGenAOSnmICMPTSDelayInMin Integer32,
adGenAOSnmICMPTSDelayInMax Integer32,
adGenAOSnmICMPTSDelayOutMin Integer32,
adGenAOSnmICMPTSDelayOutMax Integer32,
adGenAOSnmICMPTSDelayRtMin Integer32,
adGenAOSnmICMPTSDelayRtMax Integer32,
adGenAOSnmICMPTSLossRoundTrip Counter32,
adGenAOSnmICMPTSDelayOutSum Integer32,
adGenAOSnmICMPTSDelayOutSum2 Counter64,
adGenAOSnmICMPTSDelayOutNum Counter32,
adGenAOSnmICMPTSDelayInSum Integer32,
adGenAOSnmICMPTSDelayInSum2 Counter64,
adGenAOSnmICMPTSDelayInNum Counter32,
adGenAOSnmICMPTSDelayRtSum Integer32,
adGenAOSnmICMPTSDelayRtSum2 Counter64,
adGenAOSnmICMPTSDelayRtNum Counter32,
adGenAOSnmICMPTSIpvPosInMin Counter32,
adGenAOSnmICMPTSIpvPosInMax Counter32,
adGenAOSnmICMPTSIpvPosInSum Counter32,
adGenAOSnmICMPTSIpvPosInSum2 Counter64,
adGenAOSnmICMPTSIpvPosInNum Counter32,
adGenAOSnmICMPTSIpvPosOutMin Counter32,
adGenAOSnmICMPTSIpvPosOutMax Counter32,
adGenAOSnmICMPTSIpvPosOutSum Counter32,
adGenAOSnmICMPTSIpvPosOutSum2 Counter64,
adGenAOSnmICMPTSIpvPosOutNum Counter32,
adGenAOSnmICMPTSIpvPosRtMin Counter32,
adGenAOSnmICMPTSIpvPosRtMax Counter32,
adGenAOSnmICMPTSIpvPosRtSum Counter32,
adGenAOSnmICMPTSIpvPosRtSum2 Counter64,
adGenAOSnmICMPTSIpvPosRtNum Counter32,
adGenAOSnmICMPTSIpvNegInMin Counter32,
adGenAOSnmICMPTSIpvNegInMax Counter32,
adGenAOSnmICMPTSIpvNegInSum Counter32,
adGenAOSnmICMPTSIpvNegInSum2 Counter64,
adGenAOSnmICMPTSIpvNegInNum Counter32,
adGenAOSnmICMPTSIpvNegOutMin Counter32,
adGenAOSnmICMPTSIpvNegOutMax Counter32,
adGenAOSnmICMPTSIpvNegOutSum Counter32,
adGenAOSnmICMPTSIpvNegOutSum2 Counter64,
adGenAOSnmICMPTSIpvNegOutNum Counter32,
adGenAOSnmICMPTSIpvNegRtMin Counter32,
adGenAOSnmICMPTSIpvNegRtMax Counter32,
adGenAOSnmICMPTSIpvNegRtSum Counter32,
adGenAOSnmICMPTSIpvNegRtSum2 Counter64,
adGenAOSnmICMPTSIpvNegRtNum Counter32,
adGenAOSnmICMPTSIpvAbsInMin Counter32,
adGenAOSnmICMPTSIpvAbsInMax Counter32,
adGenAOSnmICMPTSIpvAbsInSum Counter32,
adGenAOSnmICMPTSIpvAbsInSum2 Counter64,
adGenAOSnmICMPTSIpvAbsInNum Counter32,
adGenAOSnmICMPTSIpvAbsOutMin Counter32,
adGenAOSnmICMPTSIpvAbsOutMax Counter32,
adGenAOSnmICMPTSIpvAbsOutSum Counter32,
adGenAOSnmICMPTSIpvAbsOutSum2 Counter64,
adGenAOSnmICMPTSIpvAbsOutNum Counter32,
adGenAOSnmICMPTSIpvAbsRtMin Counter32,
adGenAOSnmICMPTSIpvAbsRtMax Counter32,
adGenAOSnmICMPTSIpvAbsRtSum Counter32,
adGenAOSnmICMPTSIpvAbsRtSum2 Counter64,
adGenAOSnmICMPTSIpvAbsRtNum Counter32,
adGenAOSnmICMPTSPktSentCount Counter32
}
adGenAOSnmICMPTSSeqNum OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Along with adGenAOSnmICMPTSHistoryName, uniquely identifies a
row in the adGenAOSnmICMPTSHistoryTable. A sequence number of
'1' signifies the current history entry."
::= { adGenAOSnmICMPTSHistoryEntry 1 }
adGenAOSnmICMPTSHistoryName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding ICMP timestamp probe entry.
The probe identified by a particular value of this object is the
same probe as identified by the same value as a
adGenAOSnmName object instance."
::= { adGenAOSnmICMPTSHistoryEntry 2 }
adGenAOSnmICMPTSStartTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time the probe operation started."
::= { adGenAOSnmICMPTSHistoryEntry 3 }
adGenAOSnmICMPTSEndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time the probe operation ended."
::= { adGenAOSnmICMPTSHistoryEntry 4 }
adGenAOSnmICMPTSDelayInMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inbound minimum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 5 }
adGenAOSnmICMPTSDelayInMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inbound maximum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 6 }
adGenAOSnmICMPTSDelayOutMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The outbound minimum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 7 }
adGenAOSnmICMPTSDelayOutMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The outbound maximum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 8 }
adGenAOSnmICMPTSDelayRtMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip minimum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 9 }
adGenAOSnmICMPTSDelayRtMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip maximum delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 10 }
adGenAOSnmICMPTSLossRoundTrip OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round-trip packet loss."
::= { adGenAOSnmICMPTSHistoryEntry 11 }
adGenAOSnmICMPTSDelayOutSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of outbound delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 12 }
adGenAOSnmICMPTSDelayOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of outbound delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 13 }
adGenAOSnmICMPTSDelayOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual outbound delay samples."
::= { adGenAOSnmICMPTSHistoryEntry 14 }
adGenAOSnmICMPTSDelayInSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of inbound delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 15 }
adGenAOSnmICMPTSDelayInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of inbound delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 16 }
adGenAOSnmICMPTSDelayInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual inbound delay samples."
::= { adGenAOSnmICMPTSHistoryEntry 17 }
adGenAOSnmICMPTSDelayRtSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of round-trip delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 18 }
adGenAOSnmICMPTSDelayRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of round-trip delay in milliseconds."
::= { adGenAOSnmICMPTSHistoryEntry 19 }
adGenAOSnmICMPTSDelayRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of individual round-trip delay samples."
::= { adGenAOSnmICMPTSHistoryEntry 20 }
adGenAOSnmICMPTSIpvPosInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 21 }
adGenAOSnmICMPTSIpvPosInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 22 }
adGenAOSnmICMPTSIpvPosInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 23 }
adGenAOSnmICMPTSIpvPosInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of positive inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 24 }
adGenAOSnmICMPTSIpvPosInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 25 }
adGenAOSnmICMPTSIpvPosOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 26 }
adGenAOSnmICMPTSIpvPosOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 27 }
adGenAOSnmICMPTSIpvPosOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 28 }
adGenAOSnmICMPTSIpvPosOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of positive outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 29 }
adGenAOSnmICMPTSIpvPosOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 30 }
adGenAOSnmICMPTSIpvPosRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of positive round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 31 }
adGenAOSnmICMPTSIpvPosRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of positive round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 32 }
adGenAOSnmICMPTSIpvPosRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 33 }
adGenAOSnmICMPTSIpvPosRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of positive round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 34 }
adGenAOSnmICMPTSIpvPosRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 35 }
adGenAOSnmICMPTSIpvNegInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 36 }
adGenAOSnmICMPTSIpvNegInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 37 }
adGenAOSnmICMPTSIpvNegInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 38 }
adGenAOSnmICMPTSIpvNegInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative inbound inter-packet delay
variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 39 }
adGenAOSnmICMPTSIpvNegInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 40 }
adGenAOSnmICMPTSIpvNegOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 41 }
adGenAOSnmICMPTSIpvNegOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 42 }
adGenAOSnmICMPTSIpvNegOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 43 }
adGenAOSnmICMPTSIpvNegOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative outbound inter-packet delay
variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 44 }
adGenAOSnmICMPTSIpvNegOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 45 }
adGenAOSnmICMPTSIpvNegRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of negative round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 46 }
adGenAOSnmICMPTSIpvNegRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of negative round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 47 }
adGenAOSnmICMPTSIpvNegRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 48 }
adGenAOSnmICMPTSIpvNegRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of negative round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 49 }
adGenAOSnmICMPTSIpvNegRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 50 }
adGenAOSnmICMPTSIpvAbsInMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 51 }
adGenAOSnmICMPTSIpvAbsInMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute inbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 52 }
adGenAOSnmICMPTSIpvAbsInSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 53 }
adGenAOSnmICMPTSIpvAbsInSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute inbound inter-packet delay
variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 54 }
adGenAOSnmICMPTSIpvAbsInNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute inbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 55 }
adGenAOSnmICMPTSIpvAbsOutMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 56 }
adGenAOSnmICMPTSIpvAbsOutMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute outbound inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 57 }
adGenAOSnmICMPTSIpvAbsOutSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 58 }
adGenAOSnmICMPTSIpvAbsOutSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute outbound inter-packet delay
variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 59 }
adGenAOSnmICMPTSIpvAbsOutNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute outbound inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 60 }
adGenAOSnmICMPTSIpvAbsRtMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value in the set of absolute round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 61 }
adGenAOSnmICMPTSIpvAbsRtMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value in the set of absolute round-trip
inter-packet delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 62 }
adGenAOSnmICMPTSIpvAbsRtSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 63 }
adGenAOSnmICMPTSIpvAbsRtSum2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the squares of absolute round-trip inter-packet
delay variation measurements."
::= { adGenAOSnmICMPTSHistoryEntry 64 }
adGenAOSnmICMPTSIpvAbsRtNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of absolute round-trip inter-packet delay variation
measurements."
::= { adGenAOSnmICMPTSHistoryEntry 65 }
adGenAOSnmICMPTSPktSentCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent."
::= { adGenAOSnmICMPTSHistoryEntry 66 }
--
-- Network Monitor ICMP Timestamp Responder.
--
adGenAOSnmICMPTSResponder OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies ability to enable or disable the ICMP Timstamp
responder to respond to ICMP timestamp requests."
::= { adGenAOSNetMon 9 }
--
-- Network Monitor TWAMP Responder.
--
adGenAOSnmTWAMPResponder OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies ability to enable or disable the TWAMP
responder to respond to ICMP timestamp requests."
::= { adGenAOSNetMon 10 }
--
-- Network Monitor ICMP timestamp Responder Statistics Table
-- The variables that display the statistics for a NetMon ICMP timestamp
-- responder.
adGenAOSnmICMPTSResponderStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmICMPTSResponderStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operation history for a network monitor ICMP timestamp probe."
::= { adGenAOSNetMon 11 }
adGenAOSnmICMPTSResponderStatsEntry OBJECT-TYPE
SYNTAX AdGenAOSnmICMPTSResponderStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The read-only statistics of the network monitor ICMP
timestamp responder."
INDEX { adGenAOSnmICMPTSResponderStatsIndex }
::= { adGenAOSnmICMPTSResponderStatsTable 1 }
AdGenAOSnmICMPTSResponderStatsEntry ::=
SEQUENCE {
adGenAOSnmICMPTSResponderStatsIndex Unsigned32,
adGenAOSnmICMPTSResponderPacketsReceived Counter32,
adGenAOSnmICMPTSResponderPacketsSent Counter32,
adGenAOSnmClearICMPTSResponderCounters INTEGER
}
adGenAOSnmICMPTSResponderStatsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uniquely identifies a row in the
adGenAOSnmICMPTSResponderStatsTable."
::= { adGenAOSnmICMPTSResponderStatsEntry 1 }
adGenAOSnmICMPTSResponderPacketsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received by the responder."
::= { adGenAOSnmICMPTSResponderStatsEntry 2 }
adGenAOSnmICMPTSResponderPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets sent by the responder."
::= { adGenAOSnmICMPTSResponderStatsEntry 3 }
adGenAOSnmClearICMPTSResponderCounters OBJECT-TYPE
SYNTAX INTEGER {
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters of the ICMP timestamp responder.
This is a write-only variable. A read will result in no action
being taken."
::= { adGenAOSnmICMPTSResponderStatsEntry 4 }
--
-- Network Monitor TWAMP Responder Statistics Table
-- The variables that display the statistics for a NetMon TWAMP
-- responder.
adGenAOSnmTwampResponderStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmTwampResponderStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operation history for a network monitor TWAMP probe."
::= { adGenAOSNetMon 12 }
adGenAOSnmTwampResponderStatsEntry OBJECT-TYPE
SYNTAX AdGenAOSnmTwampResponderStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The read-only statistics of the network monitor TWAMP responder."
INDEX { adGenAOSnmTwampResponderStatsIndex }
::= { adGenAOSnmTwampResponderStatsTable 1 }
AdGenAOSnmTwampResponderStatsEntry ::=
SEQUENCE {
adGenAOSnmTwampResponderStatsIndex Unsigned32,
adGenAOSnmTwampResponderPacketsReceived Counter32,
adGenAOSnmTwampResponderPacketsSent Counter32,
adGenAOSnmTwampResponderSessionClosed Counter32,
adGenAOSnmTwampResponderSessionOpened Counter32,
adGenAOSnmTwampResponderSessionRejected Counter32,
adGenAOSnmClearTwampResponderCounters INTEGER
}
adGenAOSnmTwampResponderStatsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uniquely identifies a row in the
adGenAOSnmTwampResponderStatsTable."
::= { adGenAOSnmTwampResponderStatsEntry 1 }
adGenAOSnmTwampResponderPacketsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received by the responder."
::= { adGenAOSnmTwampResponderStatsEntry 2 }
adGenAOSnmTwampResponderPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets sent by the responder."
::= { adGenAOSnmTwampResponderStatsEntry 3 }
adGenAOSnmTwampResponderSessionClosed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responder sessions closed."
::= { adGenAOSnmTwampResponderStatsEntry 4 }
adGenAOSnmTwampResponderSessionOpened OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responder sessions opened."
::= { adGenAOSnmTwampResponderStatsEntry 5 }
adGenAOSnmTwampResponderSessionRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responder sessions closed."
::= { adGenAOSnmTwampResponderStatsEntry 6 }
adGenAOSnmClearTwampResponderCounters OBJECT-TYPE
SYNTAX INTEGER {
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters of the TWAMP responder.
This is a write-only variable. A read will result in no action
being taken."
::= { adGenAOSnmTwampResponderStatsEntry 7 }
-- Network Monitor Configure ICMP Echo Probe Table
-- The variables that configure a NetMon ICMP Echo probe.
adGenAOSnmCfgIEProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmCfgIEProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure a network monitor ICMP echo probe."
::= { adGenAOSNetMon 13 }
adGenAOSnmCfgIEProbeEntry OBJECT-TYPE
SYNTAX AdGenAOSnmCfgIEProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters used to configure a particular network monitor ICMP
echo probe."
INDEX { adGenAOSnmIndex }
::= { adGenAOSnmCfgIEProbeTable 1 }
AdGenAOSnmCfgIEProbeEntry ::=
SEQUENCE {
adGenAOSnmCfgIEName OCTET STRING,
adGenAOSnmIEDestHostname DisplayString,
adGenAOSnmIESrcIP IpAddress,
adGenAOSnmIEPacketLength INTEGER,
adGenAOSnmIEPacketPattern OCTET STRING
}
adGenAOSnmCfgIEName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding ICMP echo probe entry.
The probe identified by a particular value of this object is the
same probe as identified by the same value as a
adGenAOSnmName object instance."
::= { adGenAOSnmCfgIEProbeEntry 1 }
adGenAOSnmIEDestHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the destination hostname or IP address as a string in
dotted decimal format."
::= { adGenAOSnmCfgIEProbeEntry 2 }
adGenAOSnmIESrcIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the source IPv4 address."
::= { adGenAOSnmCfgIEProbeEntry 3 }
adGenAOSnmIEPacketLength OBJECT-TYPE
SYNTAX INTEGER (0..1462)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the ICMP packet."
::= { adGenAOSnmCfgIEProbeEntry 4 }
adGenAOSnmIEPacketPattern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the hexadecimal pattern for the ICMP packet."
::= { adGenAOSnmCfgIEProbeEntry 5 }
-- Network Monitor Track Table
-- The variables that configure a NetMon Track.
adGenAOSnmTrackTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOSnmTrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network monitor Track."
::= { adGenAOSNetMon 14 }
adGenAOSnmTrackEntry OBJECT-TYPE
SYNTAX AdGenAOSnmTrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network monitor Track entry."
INDEX { adGenAOSnmTrackIndex }
::= { adGenAOSnmTrackTable 1 }
AdGenAOSnmTrackEntry ::=
SEQUENCE {
adGenAOSnmTrackIndex Integer32,
adGenAOSnmTrackName OCTET STRING
}
adGenAOSnmTrackIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uniquely identifies a row in the adGenAOSnmTrackTable."
::= { adGenAOSnmTrackEntry 1 }
adGenAOSnmTrackName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the corresponding Track entry."
::= { adGenAOSnmTrackEntry 2 }
-- conformance information
adGenAOSnmConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 7 }
adGenAOSnmGroups OBJECT IDENTIFIER ::= { adGenAOSnmConformance 1 }
adGenAOSnmCompliances OBJECT IDENTIFIER ::= { adGenAOSnmConformance 2 }
--
-- MIB Compliance statements.
--
-- Full compliance statement
adGenAOSnmFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 2 of the adGenAOSNetMon MIB. When this MIB is implemented
with support for read-create, then such an implementation can claim
full compliance. Network Monitor probes can then be both monitored
and configured with this MIB. No more than 10 rows can be created
in the adGenAOSnmProbeTable at this time. Attempting to create more
than this value will return an error."
MODULE -- this module
MANDATORY-GROUPS { adGenAOSnmProbeGroup }
GROUP adGenAOSnmProbeTableNextIndexGroup
DESCRIPTION
"This optional group is only required for systems
that support the creation of entries in
the adGenAOSnmProbeTable."
OBJECT adGenAOSnmProbeTableNextIndex
MIN-ACCESS read-only
DESCRIPTION
"This object is only required for systems
that support the creation of entries in
the adGenAOSnmProbeTable."
GROUP adGenAOSnmConfigProbeGroup
DESCRIPTION
"This optional group is used to configure the probes created with
adGenAOSnmProbeGroup."
GROUP adGenAOSnmProbeStatusGroup
DESCRIPTION
"This optional group is used to view the statistics of the probes."
GROUP adGenAOSnmCfgTwampProbeGroup
DESCRIPTION
"This optional group is used to configure the TWAMP probes."
GROUP adGenAOSnmTwampHistoryGroup
DESCRIPTION
"This optional group is used to view the statistics of the TWAMP
probes."
GROUP adGenAOSnmCfgICMPTSProbeGroup
DESCRIPTION
"This optional group is used to configure the ICMP timestamp probes."
GROUP adGenAOSnmICMPTSHistoryGroup
DESCRIPTION
"This optional group is used to view the statistics of the ICMP
timestamp probes."
GROUP adGenAOSnmICMPTSResponderGroup
DESCRIPTION
"This optional group is used to enable/disable the ICMP
timestamp responder."
GROUP adGenAOSnmTWAMPResponderGroup
DESCRIPTION
"This optional group is used to enable/disable the TWAMP responder."
GROUP adGenAOSnmICMPTSResponderStatsGroup
DESCRIPTION
"This optional group is used to ICMP responder statistics."
GROUP adGenAOSnmTwampResponderStatsGroup
DESCRIPTION
"This optional group is used to TWAMP responder statistics."
GROUP adGenAOSnmCfgIEProbeGroup
DESCRIPTION
"This optional group is used to configure the ICMP echo probes."
GROUP adGenAOSnmTrackGroup
DESCRIPTION
"This optional group is used to retrieve track information."
OBJECT adGenAOSnmRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), createAndGo(4),
destroy(6) }
DESCRIPTION
"In order for this object to become active, the following
row objects MUST be defined: adGenAOSnmName and adGenAOSnmType.
The control row objects adGenAOSnmName and adGenAOSnmType cannot be
modified once this conceptual row has been created. Writes of the value
'notInService' and 'createAndWait' will not be supported. This
object can be set to 'destroy' from any value at any time."
OBJECT adGenAOSnmName
MIN-ACCESS read-only
DESCRIPTION
"Must be defined before adGenAOSnmRowStatus can be set to 'active'.
This object cannot be modified once the conceptual row has been
created."
OBJECT adGenAOSnmType
MIN-ACCESS read-only
DESCRIPTION
"Must be defined before adGenAOSnmRowStatus can be set to 'active'.
This object cannot be modified once the conceptual row has been
created."
::= { adGenAOSnmCompliances 1 }
--
-- Read-Only Compliance
--
adGenAOSnmReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 2 of the adGenAOSNetMon MIB. When this MIB is implemented
without support for read-create (i.e. in read-only mode),
then such an implementation can claim read-only compliance.
A network monitor probe can then be monitored but cannot
be configured with this MIB."
MODULE -- this module
GROUP adGenAOSnmProbeTableNextIndexGroup
DESCRIPTION
"This optional group is only required for systems
that support the creation of entries in
the adGenAOSnmProbeTable."
OBJECT adGenAOSnmProbeTableNextIndex
MIN-ACCESS read-only
DESCRIPTION
"This object is only required for systems
that support the creation of entries in
the adGenAOSnmProbeTable."
GROUP adGenAOSnmConfigProbeGroup
DESCRIPTION
"This optional group is used to configure the probes created with
adGenAOSnmProbeGroup."
GROUP adGenAOSnmProbeStatusGroup
DESCRIPTION
"This optional group is used to view the statistics of the probes."
GROUP adGenAOSnmCfgTwampProbeGroup
DESCRIPTION
"This optional group is used to configure the TWAMP probes."
GROUP adGenAOSnmTwampHistoryGroup
DESCRIPTION
"This optional group is used to view the statistics of the TWAMP
probes."
GROUP adGenAOSnmCfgICMPTSProbeGroup
DESCRIPTION
"This optional group is used to configure the ICMP timestamp probes."
GROUP adGenAOSnmICMPTSHistoryGroup
DESCRIPTION
"This optional group is used to view the statistics of the ICMP
timestamp probes."
GROUP adGenAOSnmICMPTSResponderGroup
DESCRIPTION
"This optional group is used to enable/disable the ICMP
timestamp responder."
GROUP adGenAOSnmTWAMPResponderGroup
DESCRIPTION
"This optional group is used to enable/disable the TWAMP responder."
GROUP adGenAOSnmICMPTSResponderStatsGroup
DESCRIPTION
"This optional group is used to ICMP responder statistics."
GROUP adGenAOSnmTwampResponderStatsGroup
DESCRIPTION
"This optional group is used to TWAMP responder statistics."
GROUP adGenAOSnmCfgIEProbeGroup
DESCRIPTION
"This optional group is used to configure the ICMP echo probes."
GROUP adGenAOSnmTrackGroup
DESCRIPTION
"This optional group is used to retrieve track information."
OBJECT adGenAOSnmRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not allowed."
OBJECT adGenAOSnmName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not allowed."
OBJECT adGenAOSnmType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not allowed."
GROUP adGenAOSnmNotificationGroup
DESCRIPTION
"This optional group defines the asynchronous
notifications generated by Network Monitoring Monitoring."
::= { adGenAOSnmCompliances 2 }
-- units of conformance
adGenAOSnmProbeTableNextIndexGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmProbeTableNextIndex
}
STATUS current
DESCRIPTION
"The object necessary to get the next index for creation of the
network monitor probe."
::= { adGenAOSnmGroups 1 }
adGenAOSnmProbeGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmIndex, adGenAOSnmName,
adGenAOSnmType, adGenAOSnmRowStatus
}
STATUS current
DESCRIPTION
"The objects necessary to create the network monitor probe."
::= { adGenAOSnmGroups 2 }
adGenAOSnmConfigProbeGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmCfgName, adGenAOSnmAdminStatus,
adGenAOSnmPollPeriod, adGenAOSnmTimeoutPeriod,
adGenAOSnmToleranceMode, adGenAOSnmFailTolerance,
adGenAOSnmPassTolerance, adGenAOSnmToleranceTestSize,
adGenAOSnmClearCounters
}
STATUS current
DESCRIPTION
"The objects necessary to configure the network monitor probe."
::= { adGenAOSnmGroups 3 }
adGenAOSnmProbeStatusGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmStatusName, adGenAOSnmTestStatus, adGenAOSnmTestsRun,
adGenAOSnmTestsFailed, adGenAOSnmStatsToleranceTestSize,
adGenAOSnmStatsToleranceTestValue, adGenAOSnmTimeSinceLastStatusChange
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving the statistics of the
probes."
::= { adGenAOSnmGroups 4 }
adGenAOSnmCfgTwampProbeGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmCfgTwName, adGenAOSnmTwDestHostname,
adGenAOSnmTwDestPort, adGenAOSnmTwSrcIP, adGenAOSnmTwSrcPort,
adGenAOSnmTwDscp, adGenAOSnmTwPaddingLen, adGenAOSnmTwPaddingFormat,
adGenAOSnmTwPaddingPattern, adGenAOSnmTwDataPadType,
adGenAOSnmTwPktSendCnt, adGenAOSnmTwSendScheduleType,
adGenAOSnmTwSendScheduleValue, adGenAOSnmTwIpdvAbsInMinFail,
adGenAOSnmTwIpdvAbsInAvgFail, adGenAOSnmTwIpdvAbsInMaxFail,
adGenAOSnmTwIpdvAbsInMinPass, adGenAOSnmTwIpdvAbsInAvgPass,
adGenAOSnmTwIpdvAbsInMaxPass, adGenAOSnmTwIpdvAbsOutMinFail,
adGenAOSnmTwIpdvAbsOutAvgFail, adGenAOSnmTwIpdvAbsOutMaxFail,
adGenAOSnmTwIpdvAbsOutMinPass, adGenAOSnmTwIpdvAbsOutAvgPass,
adGenAOSnmTwIpdvAbsOutMaxPass, adGenAOSnmTwIpdvAbsRtMinFail,
adGenAOSnmTwIpdvAbsRtAvgFail, adGenAOSnmTwIpdvAbsRtMaxFail,
adGenAOSnmTwIpdvAbsRtMinPass, adGenAOSnmTwIpdvAbsRtAvgPass,
adGenAOSnmTwIpdvAbsRtMaxPass, adGenAOSnmTwDelayInMinFail,
adGenAOSnmTwDelayInAvgFail, adGenAOSnmTwDelayInMaxFail,
adGenAOSnmTwDelayInMinPass, adGenAOSnmTwDelayInAvgPass,
adGenAOSnmTwDelayInMaxPass, adGenAOSnmTwDelayOutMinFail,
adGenAOSnmTwDelayOutAvgFail, adGenAOSnmTwDelayOutMaxFail,
adGenAOSnmTwDelayOutMinPass, adGenAOSnmTwDelayOutAvgPass,
adGenAOSnmTwDelayOutMaxPass, adGenAOSnmTwDelayRtMinFail,
adGenAOSnmTwDelayRtAvgFail, adGenAOSnmTwDelayRtMaxFail,
adGenAOSnmTwDelayRtMinPass, adGenAOSnmTwDelayRtAvgPass,
adGenAOSnmTwDelayRtMaxPass, adGenAOSnmTwPktRtLossFail,
adGenAOSnmTwPktRtLossPass, adGenAOSnmTwHistoryDepth
}
STATUS current
DESCRIPTION
"The objects necessary to configure the network monitor TWAMP
probe."
::= { adGenAOSnmGroups 5 }
adGenAOSnmTwampHistoryGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmTwSeqNum, adGenAOSnmTwHistoryName,
adGenAOSnmTwStartTime, adGenAOSnmTwEndTime,
adGenAOSnmTwLocalSyncState, adGenAOSnmTwLocalClkErr,
adGenAOSnmTwRemoteSyncState, adGenAOSnmTwRemoteClkErr,
adGenAOSnmTwDelayInMin, adGenAOSnmTwDelayInMax,
adGenAOSnmTwDelayOutMin, adGenAOSnmTwDelayOutMax,
adGenAOSnmTwDelayRtMin, adGenAOSnmTwDelayRtMax,
adGenAOSnmTwLossRoundTrip, adGenAOSnmTwDelayOutSum,
adGenAOSnmTwDelayOutSum2, adGenAOSnmTwDelayOutNum,
adGenAOSnmTwDelayInSum, adGenAOSnmTwDelayInSum2,
adGenAOSnmTwDelayInNum, adGenAOSnmTwDelayRtSum,
adGenAOSnmTwDelayRtSum2, adGenAOSnmTwDelayRtNum,
adGenAOSnmTwIpvPosInMin, adGenAOSnmTwIpvPosInMax,
adGenAOSnmTwIpvPosInSum, adGenAOSnmTwIpvPosInSum2,
adGenAOSnmTwIpvPosInNum, adGenAOSnmTwIpvPosOutMin,
adGenAOSnmTwIpvPosOutMax, adGenAOSnmTwIpvPosOutSum,
adGenAOSnmTwIpvPosOutSum2, adGenAOSnmTwIpvPosOutNum,
adGenAOSnmTwIpvPosRtMin, adGenAOSnmTwIpvPosRtMax,
adGenAOSnmTwIpvPosRtSum, adGenAOSnmTwIpvPosRtSum2,
adGenAOSnmTwIpvPosRtNum, adGenAOSnmTwIpvNegInMin,
adGenAOSnmTwIpvNegInMax, adGenAOSnmTwIpvNegInSum,
adGenAOSnmTwIpvNegInSum2, adGenAOSnmTwIpvNegInNum,
adGenAOSnmTwIpvNegOutMin, adGenAOSnmTwIpvNegOutMax,
adGenAOSnmTwIpvNegOutSum, adGenAOSnmTwIpvNegOutSum2,
adGenAOSnmTwIpvNegOutNum, adGenAOSnmTwIpvNegRtMin,
adGenAOSnmTwIpvNegRtMax, adGenAOSnmTwIpvNegRtSum,
adGenAOSnmTwIpvNegRtSum2, adGenAOSnmTwIpvNegRtNum,
adGenAOSnmTwIpvAbsInMin, adGenAOSnmTwIpvAbsInMax,
adGenAOSnmTwIpvAbsInSum, adGenAOSnmTwIpvAbsInSum2,
adGenAOSnmTwIpvAbsInNum, adGenAOSnmTwIpvAbsOutMin,
adGenAOSnmTwIpvAbsOutMax, adGenAOSnmTwIpvAbsOutSum,
adGenAOSnmTwIpvAbsOutSum2, adGenAOSnmTwIpvAbsOutNum,
adGenAOSnmTwIpvAbsRtMin, adGenAOSnmTwIpvAbsRtMax,
adGenAOSnmTwIpvAbsRtSum, adGenAOSnmTwIpvAbsRtSum2,
adGenAOSnmTwIpvAbsRtNum, adGenAOSnmTwPktSentCount
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving the statistics of the
TWAMP probe."
::= { adGenAOSnmGroups 6 }
adGenAOSnmCfgICMPTSProbeGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmCfgICMPTSName, adGenAOSnmICMPTSDestHostname,
adGenAOSnmICMPTSSrcIP, adGenAOSnmICMPTSDscp,
adGenAOSnmICMPTSPaddingLen, adGenAOSnmICMPTSPaddingFormat,
adGenAOSnmICMPTSPaddingPattern, adGenAOSnmICMPTSDataPadType,
adGenAOSnmICMPTSPktSendCnt, adGenAOSnmICMPTSSendScheduleType,
adGenAOSnmICMPTSSendScheduleValue, adGenAOSnmICMPTSIpdvAbsInMinFail,
adGenAOSnmICMPTSIpdvAbsInAvgFail, adGenAOSnmICMPTSIpdvAbsInMaxFail,
adGenAOSnmICMPTSIpdvAbsInMinPass, adGenAOSnmICMPTSIpdvAbsInAvgPass,
adGenAOSnmICMPTSIpdvAbsInMaxPass, adGenAOSnmICMPTSIpdvAbsOutMinFail,
adGenAOSnmICMPTSIpdvAbsOutAvgFail, adGenAOSnmICMPTSIpdvAbsOutMaxFail,
adGenAOSnmICMPTSIpdvAbsOutMinPass, adGenAOSnmICMPTSIpdvAbsOutAvgPass,
adGenAOSnmICMPTSIpdvAbsOutMaxPass, adGenAOSnmICMPTSIpdvAbsRtMinFail,
adGenAOSnmICMPTSIpdvAbsRtAvgFail, adGenAOSnmICMPTSIpdvAbsRtMaxFail,
adGenAOSnmICMPTSIpdvAbsRtMinPass, adGenAOSnmICMPTSIpdvAbsRtAvgPass,
adGenAOSnmICMPTSIpdvAbsRtMaxPass, adGenAOSnmICMPTSDelayInMinFail,
adGenAOSnmICMPTSIpvPosInMin, adGenAOSnmICMPTSIpvPosInMax,
adGenAOSnmICMPTSIpvPosInSum, adGenAOSnmICMPTSIpvPosInSum2,
adGenAOSnmICMPTSIpvPosInNum, adGenAOSnmICMPTSIpvPosOutMin,
adGenAOSnmICMPTSIpvPosOutMax, adGenAOSnmICMPTSIpvPosOutSum,
adGenAOSnmICMPTSIpvPosOutSum2, adGenAOSnmICMPTSIpvPosOutNum,
adGenAOSnmICMPTSIpvPosRtMin, adGenAOSnmICMPTSIpvPosRtMax,
adGenAOSnmICMPTSIpvPosRtSum, adGenAOSnmICMPTSIpvPosRtSum2,
adGenAOSnmICMPTSIpvPosRtNum, adGenAOSnmICMPTSIpvNegInMin,
adGenAOSnmICMPTSIpvNegInMax, adGenAOSnmICMPTSIpvNegInSum,
adGenAOSnmICMPTSIpvNegInSum2, adGenAOSnmICMPTSIpvNegInNum,
adGenAOSnmICMPTSIpvNegOutMin, adGenAOSnmICMPTSIpvNegOutMax,
adGenAOSnmICMPTSIpvNegOutSum, adGenAOSnmICMPTSIpvNegOutSum2,
adGenAOSnmICMPTSIpvNegOutNum, adGenAOSnmICMPTSIpvNegRtMin,
adGenAOSnmICMPTSIpvNegRtMax, adGenAOSnmICMPTSIpvNegRtSum,
adGenAOSnmICMPTSDelayInAvgFail, adGenAOSnmICMPTSDelayInMaxFail,
adGenAOSnmICMPTSDelayInMinPass, adGenAOSnmICMPTSDelayInAvgPass,
adGenAOSnmICMPTSDelayInMaxPass, adGenAOSnmICMPTSDelayOutMinFail,
adGenAOSnmICMPTSDelayOutAvgFail, adGenAOSnmICMPTSDelayOutMaxFail,
adGenAOSnmICMPTSDelayOutMinPass, adGenAOSnmICMPTSDelayOutAvgPass,
adGenAOSnmICMPTSDelayOutMaxPass, adGenAOSnmICMPTSDelayRtMinFail,
adGenAOSnmICMPTSDelayRtAvgFail, adGenAOSnmICMPTSDelayRtMaxFail,
adGenAOSnmICMPTSDelayRtMinPass, adGenAOSnmICMPTSDelayRtAvgPass,
adGenAOSnmICMPTSDelayRtMaxPass, adGenAOSnmICMPTSPktRtLossFail,
adGenAOSnmICMPTSPktRtLossPass, adGenAOSnmICMPTSHistoryDepth
}
STATUS current
DESCRIPTION
"The objects necessary to configure the network monitor ICMP
timestamp probe."
::= { adGenAOSnmGroups 7 }
adGenAOSnmICMPTSHistoryGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmICMPTSSeqNum, adGenAOSnmICMPTSHistoryName,
adGenAOSnmICMPTSStartTime, adGenAOSnmICMPTSEndTime,
adGenAOSnmICMPTSDelayInMin, adGenAOSnmICMPTSDelayInMax,
adGenAOSnmICMPTSDelayOutMin, adGenAOSnmICMPTSDelayOutMax,
adGenAOSnmICMPTSDelayRtMin, adGenAOSnmICMPTSDelayRtMax,
adGenAOSnmICMPTSLossRoundTrip, adGenAOSnmICMPTSDelayOutSum,
adGenAOSnmICMPTSDelayOutSum2, adGenAOSnmICMPTSDelayOutNum,
adGenAOSnmICMPTSDelayInSum, adGenAOSnmICMPTSDelayInSum2,
adGenAOSnmICMPTSDelayInNum, adGenAOSnmICMPTSDelayRtSum,
adGenAOSnmICMPTSDelayRtSum2, adGenAOSnmICMPTSDelayRtNum,
adGenAOSnmICMPTSIpvPosInMin, adGenAOSnmICMPTSIpvPosInMax,
adGenAOSnmICMPTSIpvPosInSum, adGenAOSnmICMPTSIpvPosInSum2,
adGenAOSnmICMPTSIpvPosInNum, adGenAOSnmICMPTSIpvPosOutMin,
adGenAOSnmICMPTSIpvPosOutMax, adGenAOSnmICMPTSIpvPosOutSum,
adGenAOSnmICMPTSIpvPosOutSum2, adGenAOSnmICMPTSIpvPosOutNum,
adGenAOSnmICMPTSIpvPosRtMin, adGenAOSnmICMPTSIpvPosRtMax,
adGenAOSnmICMPTSIpvPosRtSum, adGenAOSnmICMPTSIpvPosRtSum2,
adGenAOSnmICMPTSIpvPosRtNum, adGenAOSnmICMPTSIpvNegInMin,
adGenAOSnmICMPTSIpvNegInMax, adGenAOSnmICMPTSIpvNegInSum,
adGenAOSnmICMPTSIpvNegInSum2, adGenAOSnmICMPTSIpvNegInNum,
adGenAOSnmICMPTSIpvNegOutMin, adGenAOSnmICMPTSIpvNegOutMax,
adGenAOSnmICMPTSIpvNegOutSum, adGenAOSnmICMPTSIpvNegOutSum2,
adGenAOSnmICMPTSIpvNegOutNum, adGenAOSnmICMPTSIpvNegRtMin,
adGenAOSnmICMPTSIpvNegRtMax, adGenAOSnmICMPTSIpvNegRtSum,
adGenAOSnmICMPTSIpvNegRtSum2, adGenAOSnmICMPTSIpvNegRtNum,
adGenAOSnmICMPTSIpvAbsInMin, adGenAOSnmICMPTSIpvAbsInMax,
adGenAOSnmICMPTSIpvAbsInSum, adGenAOSnmICMPTSIpvAbsInSum2,
adGenAOSnmICMPTSIpvAbsInNum, adGenAOSnmICMPTSIpvAbsOutMin,
adGenAOSnmICMPTSIpvAbsOutMax, adGenAOSnmICMPTSIpvAbsOutSum,
adGenAOSnmICMPTSIpvAbsOutSum2, adGenAOSnmICMPTSIpvAbsOutNum,
adGenAOSnmICMPTSIpvAbsRtMin, adGenAOSnmICMPTSIpvAbsRtMax,
adGenAOSnmICMPTSIpvAbsRtSum, adGenAOSnmICMPTSIpvAbsRtSum2,
adGenAOSnmICMPTSIpvAbsRtNum, adGenAOSnmICMPTSPktSentCount
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving the statistics of the
ICMP timestamp probe."
::= { adGenAOSnmGroups 8 }
adGenAOSnmICMPTSResponderGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmICMPTSResponder
}
STATUS current
DESCRIPTION
"Object designed to assist in changing the state of the ICMP
timestamp responder."
::= { adGenAOSnmGroups 9 }
adGenAOSnmTWAMPResponderGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmTWAMPResponder
}
STATUS current
DESCRIPTION
"Object designed to assist in changing the state of the TWAMP
responder."
::= { adGenAOSnmGroups 10 }
adGenAOSnmICMPTSResponderStatsGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmICMPTSResponderStatsIndex,
adGenAOSnmICMPTSResponderPacketsReceived,
adGenAOSnmICMPTSResponderPacketsSent,
adGenAOSnmClearICMPTSResponderCounters
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving the statistics of the
ICMP timestamp responder."
::= { adGenAOSnmGroups 11 }
adGenAOSnmTwampResponderStatsGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmTwampResponderStatsIndex,
adGenAOSnmTwampResponderPacketsReceived,
adGenAOSnmTwampResponderPacketsSent,
adGenAOSnmTwampResponderSessionClosed,
adGenAOSnmTwampResponderSessionOpened,
adGenAOSnmTwampResponderSessionRejected,
adGenAOSnmClearTwampResponderCounters
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving the statistics of the
TWAMP responder."
::= { adGenAOSnmGroups 12 }
adGenAOSnmCfgIEProbeGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmCfgIEName,
adGenAOSnmIEDestHostname,
adGenAOSnmIESrcIP,
adGenAOSnmIEPacketLength,
adGenAOSnmIEPacketPattern
}
STATUS current
DESCRIPTION
"Objects designed to assist in configuring the ICMP echo probe."
::= { adGenAOSnmGroups 13 }
adGenAOSnmTrackGroup OBJECT-GROUP
OBJECTS {
adGenAOSnmTrackIndex,
adGenAOSnmTrackName
}
STATUS current
DESCRIPTION
"Objects designed to assist in retrieving track information."
::= { adGenAOSnmGroups 14 }
adGenAOSnmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { adGenAOSnmTrackStateChgFail,
adGenAOSnmTrackStateChgPass }
STATUS current
DESCRIPTION
"Traps which may be used to enhance event driven
management of Network Monitoring traps."
::= { adGenAOSnmGroups 15 }
-- definition of track-related traps.
adGenAOSnmTrackStateChgFail NOTIFICATION-TYPE
OBJECTS { adGenAOSnmTrackIndex, adGenAOSnmTrackName }
STATUS current
DESCRIPTION
"A stateChangeFail trap indicates that the specified track
has changed states from Pass to Fail."
::= { adGenAOSnmTrackTraps 1 }
adGenAOSnmTrackStateChgPass NOTIFICATION-TYPE
OBJECTS { adGenAOSnmTrackIndex, adGenAOSnmTrackName }
STATUS current
DESCRIPTION
"A stateChangePass trap indicates that the specified track
has changed states from Fail to Pass."
::= { adGenAOSnmTrackTraps 2 }
END