676 lines
22 KiB
Plaintext
676 lines
22 KiB
Plaintext
CM-PROTECTION-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,
|
|
MacAddress, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
neIndex, shelfIndex, slotIndex
|
|
FROM CM-ENTITY-MIB
|
|
fsp150cm
|
|
FROM ADVA-MIB;
|
|
|
|
cmProtectionMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201006230000Z"
|
|
ORGANIZATION "ADVA Optical Networking"
|
|
CONTACT-INFO
|
|
" Raghav Trivedi
|
|
ADVA Optical Networking, Inc.
|
|
Tel: +1 972 759-1239
|
|
E-mail: rtrivedi@advaoptical.com
|
|
Postal: 2301 N. Greenville Ave. #300
|
|
Richardson, TX USA 75082"
|
|
DESCRIPTION
|
|
"This module defines the Protection MIB definitions used by
|
|
the F3 (FSP150CM/CC) product lines.
|
|
Copyright (C) ADVA Optical Networking."
|
|
REVISION "201006230000Z"
|
|
DESCRIPTION
|
|
"Notes from release 201006230000Z,
|
|
(1)Added universalring as CmProtSwitchMode for R4.4CC.
|
|
|
|
Notes from release 200803030000Z,
|
|
(1)MIB version ready for release FSP150CM 3.1."
|
|
::= {fsp150cm 7}
|
|
|
|
--
|
|
-- OID definitions
|
|
--
|
|
cmProtObjects OBJECT IDENTIFIER ::= {cmProtectionMIB 1}
|
|
cmProtNotifications OBJECT IDENTIFIER ::= {cmProtectionMIB 2}
|
|
cmProtConformance OBJECT IDENTIFIER ::= {cmProtectionMIB 3}
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
CmProtSwitchMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for Protection Switch Mode.
|
|
oneplusone - 1+1, this is the NPCUP mode,
|
|
dualactiverx - In this mode, traffic is bridged in A2N
|
|
direction (same as 1+1), however
|
|
both network ports receive customer traffic in
|
|
N2A direction. In this mode, both network
|
|
ports are working, i.e. there is no
|
|
protection.
|
|
universalring - In this mode, traffic is bridged in A2N
|
|
direction (same as 1+1), both
|
|
network ports receive customer traffic in
|
|
N2A direction. In this mode, both network
|
|
ports are working, i.e. no protection.
|
|
The main difference w.r.t dualactiverx is that
|
|
traffic in N2A direction, which does not match
|
|
the service definition is steered to the other
|
|
network port, i.e. non-service matching traffic
|
|
from N1 goes to N2 and vice versa."
|
|
SYNTAX INTEGER {
|
|
oneplusone (1),
|
|
dualactiverx(2),
|
|
universalring(3)
|
|
}
|
|
|
|
CmProtSwitchDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for Protection Switch Direction.
|
|
unidirectional - Unidirectional Protection Switching,
|
|
bidirectional - Bidirectional Protection Switching."
|
|
SYNTAX INTEGER {
|
|
unidirectional (1),
|
|
bidirectional (2)
|
|
}
|
|
|
|
CmProtSwitchAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for User initiated Protection Switch Action.
|
|
manualfromworking - Manual Switch from Working,
|
|
forcedfromworking - Forced Switch from Working,
|
|
manualfromprotect - Manual Switch from Protect,
|
|
forcedfromprotect - Forced Switch from Protect,
|
|
lockoutfromprotect - Lockout from Protect"
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
releaseprotswitch (2),
|
|
manualfromworking (3),
|
|
forcedfromworking (4),
|
|
manualfromprotect (5),
|
|
forcedfromprotect (6),
|
|
lockoutfromprotect(7)
|
|
}
|
|
|
|
CmProtUnitType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for Protection Unit Type.
|
|
working - Working Protection Unit,
|
|
protect - Protect Protection Unit."
|
|
SYNTAX INTEGER {
|
|
working (1),
|
|
protect (2)
|
|
}
|
|
|
|
CmProtUnitState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for Protection Unit State.
|
|
active - Active Protection Unit,
|
|
standby - Standby Protection Unit."
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
standby (2)
|
|
}
|
|
|
|
CmProtGroupStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for Protection Status.
|
|
nooutstandingreq - No oustanding request,
|
|
sf-protect - Signal failure on protect,
|
|
sf-working - Signal failure on working,
|
|
sd-protect - Signal degrade on protect,
|
|
sd-working - Signal degrade on working,
|
|
manual-protect - Manual on protect
|
|
manual-working - Manual on working
|
|
forced-working - Forced on working
|
|
forced-protect - Forced on protect
|
|
lockout-protect - Lockout on protect
|
|
waitToRestore - Wait to restore"
|
|
SYNTAX INTEGER {
|
|
nooutstandingreq (1),
|
|
sf-protect (2),
|
|
sf-working (3),
|
|
sd-protect (4),
|
|
sd-working (5),
|
|
manual-protect (6),
|
|
manual-working (7),
|
|
forced-protect (8),
|
|
forced-working (9),
|
|
lockout-protect (10),
|
|
waitToRestore (11)
|
|
}
|
|
|
|
--
|
|
-- Facility Protection Group Table
|
|
--
|
|
cmFacProtGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmFacProtGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to the Facility Protection Groups.
|
|
Entries can be created/deleted in this table by management
|
|
application action."
|
|
::= { cmProtObjects 1 }
|
|
|
|
cmFacProtGroupEntry OBJECT-TYPE
|
|
SYNTAX CmFacProtGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing information applicable to a particular
|
|
Protection Group."
|
|
INDEX { neIndex, shelfIndex, slotIndex, cmFacProtGroupIndex }
|
|
::= { cmFacProtGroupTable 1 }
|
|
|
|
CmFacProtGroupEntry ::= SEQUENCE {
|
|
cmFacProtGroupIndex Integer32,
|
|
cmFacProtGroupUserLabel DisplayString,
|
|
cmFacProtGroupSwitchMode CmProtSwitchMode,
|
|
cmFacProtGroupRevertive TruthValue,
|
|
cmFacProtGroupWaitToRestore Integer32,
|
|
cmFacProtGroupDirection CmProtSwitchDirection,
|
|
cmFacProtGroupWorkPort VariablePointer,
|
|
cmFacProtGroupProtPort VariablePointer,
|
|
cmFacProtGroupStatus CmProtGroupStatus,
|
|
cmFacProtGroupAction CmProtSwitchAction,
|
|
cmFacProtGroupStorageType StorageType,
|
|
cmFacProtGroupRowStatus RowStatus,
|
|
cmFacProtGroupMacAddress MacAddress
|
|
}
|
|
|
|
cmFacProtGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index value associated with the Facility Protection Group."
|
|
::= { cmFacProtGroupEntry 1 }
|
|
|
|
cmFacProtGroupUserLabel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Label associated with the Facility Protection Group."
|
|
::= { cmFacProtGroupEntry 2 }
|
|
|
|
cmFacProtGroupSwitchMode OBJECT-TYPE
|
|
SYNTAX CmProtSwitchMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Group's Protection Switch Mode."
|
|
::= { cmFacProtGroupEntry 3 }
|
|
|
|
cmFacProtGroupRevertive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the Facility Protection is revertive or not.
|
|
This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'."
|
|
::= { cmFacProtGroupEntry 4 }
|
|
|
|
cmFacProtGroupWaitToRestore OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60|0)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in minutes to wait before reverting to Working facility
|
|
in case of cmFacProtGroupRevertive set to revertive.
|
|
This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'."
|
|
::= { cmFacProtGroupEntry 5 }
|
|
|
|
cmFacProtGroupDirection OBJECT-TYPE
|
|
SYNTAX CmProtSwitchDirection
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supported Protection Group Switch direction.
|
|
This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'."
|
|
::= { cmFacProtGroupEntry 6 }
|
|
|
|
cmFacProtGroupWorkPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Group exists between 2 facilities (ports).
|
|
This object represents the WORKING facility Port."
|
|
::= { cmFacProtGroupEntry 7 }
|
|
|
|
cmFacProtGroupProtPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object
|
|
represents the PROTECT facility Network Element Port when
|
|
cmFacProtGroupSwitchMode is oneplusone. In the case of
|
|
dualactiverx, this represents the second active port."
|
|
::= { cmFacProtGroupEntry 8 }
|
|
|
|
cmFacProtGroupStatus OBJECT-TYPE
|
|
SYNTAX CmProtGroupStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the PROTECTION group status."
|
|
::= { cmFacProtGroupEntry 9 }
|
|
|
|
cmFacProtGroupAction OBJECT-TYPE
|
|
SYNTAX CmProtSwitchAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User initiated protection switch action."
|
|
::= { cmFacProtGroupEntry 10 }
|
|
|
|
cmFacProtGroupStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { cmFacProtGroupEntry 11 }
|
|
|
|
cmFacProtGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row. An entry MUST NOT exist in the
|
|
active state unless all objects in the entry have an
|
|
appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of cmFacProtGroupRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
cmFacProtGroupRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this object has a
|
|
value of active(1).
|
|
|
|
The cmFacProtGroupRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { cmFacProtGroupEntry 12 }
|
|
|
|
cmFacProtGroupMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows retrieval of the Mac Address of the PROTECTION group."
|
|
::= { cmFacProtGroupEntry 13 }
|
|
|
|
|
|
--
|
|
-- Facility Protection Unit Table
|
|
--
|
|
cmFacProtUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmFacProtUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to the Facility Protection
|
|
Units."
|
|
::= { cmProtObjects 2 }
|
|
|
|
cmFacProtUnitEntry OBJECT-TYPE
|
|
SYNTAX CmFacProtUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing information applicable to a particular
|
|
Protection Unit."
|
|
INDEX { neIndex, shelfIndex, slotIndex, cmFacProtGroupIndex, cmFacProtUnitIndex }
|
|
::= { cmFacProtUnitTable 1 }
|
|
|
|
CmFacProtUnitEntry ::= SEQUENCE {
|
|
cmFacProtUnitIndex Integer32,
|
|
cmFacProtUnitType CmProtUnitType,
|
|
cmFacProtUnitState CmProtUnitState,
|
|
cmFacProtUnitPort VariablePointer
|
|
}
|
|
|
|
cmFacProtUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index value associated with the Facility Protection Unit."
|
|
::= { cmFacProtUnitEntry 1 }
|
|
|
|
cmFacProtUnitType OBJECT-TYPE
|
|
SYNTAX CmProtUnitType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Unit's Type, i.e. whether working or protect."
|
|
::= { cmFacProtUnitEntry 2 }
|
|
|
|
cmFacProtUnitState OBJECT-TYPE
|
|
SYNTAX CmProtUnitState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Unit's State, i.e. whether active or standby."
|
|
::= { cmFacProtUnitEntry 3 }
|
|
|
|
cmFacProtUnitPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Unit's points to a facility (port).
|
|
This object represents the facility Network Element port."
|
|
::= { cmFacProtUnitEntry 4 }
|
|
|
|
|
|
--
|
|
-- Multiplex Section Protection Group Table
|
|
--
|
|
cmMSPGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmMSPGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to the Multiplex Section Protection Groups.
|
|
Entries can be created/deleted in this table by management
|
|
application action."
|
|
::= { cmProtObjects 3 }
|
|
|
|
cmMSPGroupEntry OBJECT-TYPE
|
|
SYNTAX CmMSPGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing information applicable to a particular
|
|
Protection Group."
|
|
INDEX { neIndex, cmMSPGroupIndex }
|
|
::= { cmMSPGroupTable 1 }
|
|
|
|
CmMSPGroupEntry ::= SEQUENCE {
|
|
cmMSPGroupIndex Integer32,
|
|
cmMSPGroupUserLabel DisplayString,
|
|
cmMSPGroupSwitchMode CmProtSwitchMode,
|
|
cmMSPGroupRevertive TruthValue,
|
|
cmMSPGroupWaitToRestore Integer32,
|
|
cmMSPGroupB2DEGTrigger TruthValue,
|
|
cmMSPGroupDirection CmProtSwitchDirection,
|
|
cmMSPGroupWorkPort VariablePointer,
|
|
cmMSPGroupProtPort VariablePointer,
|
|
cmMSPGroupStatus CmProtGroupStatus,
|
|
cmMSPGroupAction CmProtSwitchAction,
|
|
cmMSPGroupStorageType StorageType,
|
|
cmMSPGroupRowStatus RowStatus,
|
|
cmMSPGroupMacAddress MacAddress
|
|
}
|
|
|
|
cmMSPGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index value associated with the Multiplex Section Protection Group."
|
|
::= { cmMSPGroupEntry 1 }
|
|
|
|
cmMSPGroupUserLabel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Label associated with the Multiplex Section Protection Group."
|
|
::= { cmMSPGroupEntry 2 }
|
|
|
|
cmMSPGroupSwitchMode OBJECT-TYPE
|
|
SYNTAX CmProtSwitchMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Protection Group's Protection Switch Mode."
|
|
::= { cmMSPGroupEntry 3 }
|
|
|
|
cmMSPGroupRevertive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the Multiplex Section Protection is revertive or not.
|
|
This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'."
|
|
::= { cmMSPGroupEntry 4 }
|
|
|
|
cmMSPGroupWaitToRestore OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60|0)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in minutes to wait before reverting to Working facility
|
|
in case of cmMSPGroupRevertive set to revertive.
|
|
This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'."
|
|
::= { cmMSPGroupEntry 5 }
|
|
|
|
cmMSPGroupB2DEGTrigger OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"B2DEG is trigger of MSP or not."
|
|
::= { cmMSPGroupEntry 6 }
|
|
|
|
cmMSPGroupDirection OBJECT-TYPE
|
|
SYNTAX CmProtSwitchDirection
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supported Protection Group Switch direction.
|
|
This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'."
|
|
::= { cmMSPGroupEntry 7 }
|
|
|
|
cmMSPGroupWorkPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Protection Group exists between 2 facilities (ports).
|
|
This object represents the WORKING facility Port."
|
|
::= { cmMSPGroupEntry 8 }
|
|
|
|
cmMSPGroupProtPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object
|
|
represents the PROTECT facility Network Element Port when
|
|
cmMSPGroupSwitchMode is oneplusone. In the case of
|
|
dualactiverx, this represents the second active port."
|
|
::= { cmMSPGroupEntry 9 }
|
|
|
|
cmMSPGroupStatus OBJECT-TYPE
|
|
SYNTAX CmProtGroupStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the PROTECTION group status."
|
|
::= { cmMSPGroupEntry 10 }
|
|
|
|
cmMSPGroupAction OBJECT-TYPE
|
|
SYNTAX CmProtSwitchAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User initiated protection switch action."
|
|
::= { cmMSPGroupEntry 11 }
|
|
|
|
cmMSPGroupStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { cmMSPGroupEntry 12 }
|
|
|
|
cmMSPGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row. An entry MUST NOT exist in the
|
|
active state unless all objects in the entry have an
|
|
appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of cmMSPGroupRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
cmMSPGroupRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this object has a
|
|
value of active(1).
|
|
|
|
The cmMSPGroupRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { cmMSPGroupEntry 13 }
|
|
|
|
cmMSPGroupMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows retrieval of the Mac Address of the PROTECTION group."
|
|
::= { cmMSPGroupEntry 14 }
|
|
|
|
|
|
--
|
|
-- Multiplex Section Protection Unit Table
|
|
--
|
|
cmMSPUnitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmMSPUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to the Multiplex Section Protection
|
|
Units."
|
|
::= { cmProtObjects 4 }
|
|
|
|
cmMSPUnitEntry OBJECT-TYPE
|
|
SYNTAX CmMSPUnitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing information applicable to a particular
|
|
Protection Unit."
|
|
INDEX { neIndex, cmMSPGroupIndex, cmMSPUnitIndex }
|
|
::= { cmMSPUnitTable 1 }
|
|
|
|
CmMSPUnitEntry ::= SEQUENCE {
|
|
cmMSPUnitIndex Integer32,
|
|
cmMSPUnitType CmProtUnitType,
|
|
cmMSPUnitState CmProtUnitState,
|
|
cmMSPUnitPort VariablePointer
|
|
}
|
|
|
|
cmMSPUnitIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index value associated with the Multiplex Section Protection Unit."
|
|
::= { cmMSPUnitEntry 1 }
|
|
|
|
cmMSPUnitType OBJECT-TYPE
|
|
SYNTAX CmProtUnitType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Protection Unit's Type, i.e. whether working or protect."
|
|
::= { cmMSPUnitEntry 2 }
|
|
|
|
cmMSPUnitState OBJECT-TYPE
|
|
SYNTAX CmProtUnitState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Protection Unit's State, i.e. whether active or standby."
|
|
::= { cmMSPUnitEntry 3 }
|
|
|
|
cmMSPUnitPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility Protection Unit's points to a facility (port).
|
|
This object represents the facility Network Element port."
|
|
::= { cmMSPUnitEntry 4 }
|
|
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
cmProtCompliances OBJECT IDENTIFIER ::= {cmProtConformance 1}
|
|
cmProtGroups OBJECT IDENTIFIER ::= {cmProtConformance 2}
|
|
|
|
cmProtCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the CM Prot
|
|
group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cmProtObjectGroup, cmMSProtObjectGroup
|
|
}
|
|
::= { cmProtCompliances 1 }
|
|
|
|
cmProtObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cmFacProtGroupIndex, cmFacProtGroupUserLabel, cmFacProtGroupSwitchMode,
|
|
cmFacProtGroupRevertive, cmFacProtGroupWaitToRestore,
|
|
cmFacProtGroupDirection, cmFacProtGroupWorkPort,
|
|
cmFacProtGroupProtPort, cmFacProtGroupStatus, cmFacProtGroupAction,
|
|
cmFacProtGroupStorageType, cmFacProtGroupRowStatus,
|
|
cmFacProtGroupMacAddress,
|
|
|
|
cmFacProtUnitIndex, cmFacProtUnitType, cmFacProtUnitState,
|
|
cmFacProtUnitPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the Protection Object group."
|
|
::= { cmProtGroups 1 }
|
|
|
|
cmMSProtObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cmMSPGroupIndex, cmMSPGroupUserLabel,
|
|
cmMSPGroupSwitchMode, cmMSPGroupRevertive,
|
|
cmMSPGroupWaitToRestore, cmMSPGroupB2DEGTrigger,
|
|
cmMSPGroupDirection, cmMSPGroupWorkPort,
|
|
cmMSPGroupProtPort, cmMSPGroupStatus,
|
|
cmMSPGroupAction, cmMSPGroupStorageType,
|
|
cmMSPGroupRowStatus, cmMSPGroupMacAddress,
|
|
|
|
cmMSPUnitIndex, cmMSPUnitType,
|
|
cmMSPUnitState, cmMSPUnitPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the Multiplex
|
|
Section Protection Object group."
|
|
::= { cmProtGroups 2 }
|
|
|
|
END
|