david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/adva/CM-SA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

6958 lines
264 KiB
Plaintext
Raw Blame History

CM-SA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, IpAddress, Unsigned32, Counter64
FROM SNMPv2-SMI
DateAndTime, DisplayString, TruthValue, RowStatus, StorageType,
MacAddress, VariablePointer, TEXTUAL-CONVENTION
FROM SNMPv2-TC
Ipv6Address
FROM IPV6-TC
fsp150cm
FROM ADVA-MIB
TrafficDirection, VlanId, VlanPriority, IpVersion,
IpPriorityMapMode, ScheduleType, ClassOfServiceType, CmPmBinAction
FROM CM-COMMON-MIB
neIndex, shelfIndex, slotIndex
FROM CM-ENTITY-MIB
BitErrRate, PolicerColorMode
FROM CM-FACILITY-MIB
AdminState, OperationalState, SecondaryState,
PerfCounter64, PerfCounter32, ScheduleType, SchedActivityStatus,
MepDestinationType, ClassOfServiceType
FROM CM-COMMON-MIB
Dot1agCfmMepIdOrZero
FROM IEEE8021-CFM-MIB;
cmServiceAssuranceMIB MODULE-IDENTITY
LAST-UPDATED "201912010000Z"
ORGANIZATION "ADVA Optical Networking SE"
CONTACT-INFO
"Web URL: http://adva.com/
E-mail: support@adva.com
Postal: ADVA Optical Networking SE
Campus Martinsried
Fraunhoferstrasse 9a
82152 Martinsried/Munich
Germany
Phone: +49 089 89 06 65 0
Fax: +49 089 89 06 65 199 "
DESCRIPTION
"This module defines the Service Assurance MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA."
REVISION "201912010000Z"
DESCRIPTION
"
Notes from release 201912010000Z
(1) Added ecpaControlMonitorPortType
Notes from release 201607310000Z
(1)Added the following objects for EsaProbeCOSConfigEntry:
- esaProbeCOSConfigSoamPmExtAvailFlrThreshold
- esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus
- esaProbeCOSConfigSoamPmExtConDeltaTsForAvail
Notes from release 201509200000Z
(1)Added new objects to ecpaControlTable:
- ecpaControlEcpaType
(2)Added new objects to ecpaConfigStreamTable:
- ecpaConfigStreamUdpControl
- ecpaConfigStreamUdpSrcPort
- ecpaConfigStreamUdpDstPort
(3)Added new objects to ecpaTestStreamTable:
- ecpaTestStreamUdpControl
- ecpaTestStreamUdpSrcPort
- ecpaTestStreamUdpDstPort
(3)Added new enumeration:
- EcpaType
Notes from release 201302130000Z
(i)Added the following objects:
- esaProbeAlias
- esaReflectorAlias
Notes from release 201111220000Z
(i)Added the following objects to support ESA Probes and Reflectors on
pluggable cards:
-esaProbeAdminState, esaProbeOperationalState, esaProbeSecondaryState
-esaReflectorAdminState, esaReflectorOperationalState,
esaReflectorSecondaryState
Notes from release 201105260000Z
(i)Formalized the compliance groups in the MIBs
Notes from release 201006220000Z
(i)Updated range of ecpaControlNumFrames to (0..2147483647),
(ii)Removed redundant column ecpaTestStreamRxBitRate
Notes from release 201006100000Z
(i)Updated range of esaProbeHistoryBins and esaProbeDistHistoryBins to
include 0 - since it is possible that some ESA Probes will not have history bins
(ii)Changed ecpaControlStatus occurrences to ecpaControlTestStatus
(iii)Changed EcpaTestType TC literal continous to continuous
Notes from release 201003250000Z,
(1)Added new objects for ecpaTestStreamRxBitRate, ecpaConfigStreamUsePortSourceMAC
(1)ecpaControlDuration now has a max range of 72 hours (259200 seconds)
instead of 1 hour (3600 seconds)
Notes from release 201002110000Z
This release is applicable to the FSP150CC Release 4.3 device GE201, GE201-SE and
FSP150CM Release 4.1.
(1)Added new objects to ecpaConfigStreamTable
ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id,
ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType,
ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address
(2)Added new objects to ecpaTestStreamTable
ecpaTestStreamInnerVlan2Enabled, ecpaTestStreamInnerVlan2Id,
ecpaTestStreamInnerVlan2Prio, ecpaTestStreamInnerVlan2EtherType,
ecpaTestStreamDestIpV4Address, ecpaTestStreamDestIpV6Address, ecpaTestStreamChanged
(3)Added new objects to esaProbeTable
esaProbeMultiCOSEnabled, esaProbeSLAMonitorType, esaProbeCOSType,
esaProbeSLMMulticastMACEnabled, esaProbeSOAMInterval, esaProbeSOAMPktSize
(4)Added new tables : esaProbeCOSConfigTable, esaProbeMultiDestinationTable
Notes from release 200904150000Z
This release is applicable to the FSP150CC Release 4.1
devices GE101 and GE206.
Following new tables are added,
esaProbeTable, esaProbeScheduleGroupTable,
esaReflectorTable, esaProbeStatsTable, esaProbeHistoryTable,
esaProbeDistStatsConfigTable, esaProbeDistStatsTable,
esaProbeDistStatsBinTable, esaProbeDistHistoryTable,
esaProbeDistHistoryBinTable, esaProbeStatsThresholdTable
Following notification is added,
esaProbeThresholdCrossingAlert
Notes from release 200803030000Z,
(1)MIB version ready for release FSP150CM 3.1.
Notes from release 201603150000Z
This release is applicable to the FSP150CC Release 7.1.1 device GE206V, XG210
(1) Following new extension tables are added,
f3EsaProbeStatsSoamPmExtTable, f3EsaProbeHistorySoamPmExtTable, f3EsaProbeCOSConfigSoamPmExtTable."
::= {fsp150cm 8}
--
-- OID definitions
--
cmServAssuranceObjects OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 1}
cmServAssuranceNotifications OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 2}
cmServAssuranceConformance OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 3}
--
-- Textual Conventions
--
EcpaTestStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Test Status."
SYNTAX INTEGER {
initial (1),
in-progress (2),
stopped (3),
completed (4),
aborted (5)
}
EcpaPayloadType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Payload Type."
SYNTAX INTEGER {
fixed (1),
random (2)
}
EcpaTestType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Control Test Type."
SYNTAX INTEGER {
duration(1),
numframes(2),
continuous(3)
}
EcpaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Type."
SYNTAX INTEGER {
regular(1),
enhanced(2)
}
EcpaMonitorPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Monitor Port Type."
SYNTAX INTEGER {
any(1),
source(2)
}
EcpaControlAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ECPA Control Action."
SYNTAX INTEGER {
not-applicable(0),
start(1),
stop(2)
}
EsaProbeProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Probe Protocol Types."
SYNTAX INTEGER {
icmpEcho(1),
udpEcho(2),
icmpTimestamp(3),
y1731(4), -- this is the Y.1731 LM/DM protocol
y1731-slm-slr(5), -- this is the Y.1731 SLM/SLR protocol
y1731-slm-dmm(6)
}
EsaProbeDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Probe Direction."
SYNTAX INTEGER {
up(1), -- towards the bridge
down(2) -- away from the bridge
}
EsaReflectorDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Reflector Direction."
SYNTAX INTEGER {
up(1), -- towards the bridge
down(2) -- away from the bridge
}
EsaProbePmIntervalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Probe PM Interval Types."
SYNTAX INTEGER {
current(1), -- current pm
rollover(2) -- rollover
}
EsaProbeHistoryIntervalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Probe Y1731 History Interval Types."
SYNTAX INTEGER {
interval-1min(1), -- 1 min
interval-5min(2), -- 5 mins
interval-10min(3), -- 10 mins
interval-15min(4), -- 15 mins
interval-60min(5) -- 60 mins
}
EsaProbeDistStatsType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the ESA Probe Statistics Distribution Type."
SYNTAX INTEGER {
roundtrip-delay(1),
oneway-p2r-delay(2),
oneway-r2p-delay(3),
oneway-p2r-jitter(4),
oneway-r2p-jitter(5),
oneway-p2r-absjitter(6),
oneway-r2p-absjitter(7),
roundtrip-absjitter(8),
oneway-p2r-fdr(9),
oneway-r2p-fdr(10),
roundtrip-fdr(11)
}
EsaAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Scheduled Group/Reflector Action."
SYNTAX INTEGER {
not-applicable(0),
suspend(1),
resume(2),
addEsaProbe(3),
removeEsaProbe(4)
}
EsaProbePktIntervalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Interval Type used for LMM and DMM messages."
SYNTAX INTEGER {
not-applicable(0),
interval-10ms(1),--applicable for DMM
interval-100ms(2),--applicable for DMM
interval-1sec(3), -- applicable for LMM and DMM
interval-10sec(4), -- applicable for LMM and DMM
interval-1min(5) -- applicable for LMM and DMM
}
EsaProbeSLAMonitorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ESA Probe SLA Monitor Type."
SYNTAX INTEGER {
not-applicable(0),
point-to-point(1),-- point2point
point-to-multipoint(2)--point2multipoint
}
BerTestStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BER Test Status."
SYNTAX INTEGER {
not-applicable(0),
running (1),
not-running (2)
}
BerTestMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BER Test Control Test Mode."
SYNTAX INTEGER {
not-applicable(0),
generator(1),
monitor(2),
singleend(3)
}
BertControlAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BER Test Control Action."
SYNTAX INTEGER {
not-applicable(0),
start(1),
stop(2)
}
BertPattern ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BERT Tx Pattern."
SYNTAX INTEGER {
not-applicable(0),
all-0(1),
all-1(2),
alt-1100(3),
bit-1in8(4),
bit-3in24(5),
bit-2exp20-qrss(6),
bit-2exp11-prbs(7),
bit-2exp15-prbs(8),
bit-2exp23-prbs(9),
userdefined(10)
}
BertUserPatternLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BERT Error Rate."
SYNTAX INTEGER {
not-applicable(0),
length-1byte(1),
length-2byte(2),
length-3byte(3),
length-4byte(4)
}
BertSyncState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BERT Sync State."
SYNTAX INTEGER {
not-applicable(0),
sync(1),
outofsync(2)
}
--
-- Etherjack Connection Performance Analyzer Control Table
--
ecpaControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EcpaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of Etherjack Connection
Performance Analyzer Streams. Upto 12 ECPA streams can
be configured per test head; 3 ECPA streams can be
simultaneously executed."
::= { cmServAssuranceObjects 1 }
ecpaControlEntry OBJECT-TYPE
SYNTAX EcpaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ecpaControlTable."
INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex }
::= { ecpaControlTable 1 }
EcpaControlEntry ::= SEQUENCE {
ecpaControlIndex Integer32,
ecpaControlSourcePort VariablePointer,
ecpaControlTestType EcpaTestType,
ecpaControlNumFrames Integer32,
ecpaControlDuration Integer32,
ecpaControlInjectorDirection TrafficDirection,
ecpaControlMonitorDirection TrafficDirection,
ecpaControlStream1 Integer32,
ecpaControlStream2 Integer32,
ecpaControlStream3 Integer32,
ecpaControlAction EcpaControlAction,
ecpaControlTestStatus EcpaTestStatus,
ecpaControlStorageType StorageType,
ecpaControlRowStatus RowStatus,
ecpaControlEcpaType EcpaType,
ecpaControlMonitorPortType EcpaMonitorPortType
}
ecpaControlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this Etherjack Connection Performance Analyzer Control Test head.
There is only one test head per card."
::= { ecpaControlEntry 1 }
ecpaControlSourcePort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pointer to the Access or Network Port on which the ECPA test
will be started within a card."
::= { ecpaControlEntry 2 }
ecpaControlTestType OBJECT-TYPE
SYNTAX EcpaTestType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of ECPA test to be performed. When 'duration' test is
specified, ECPA test is run for 'ecpaControlDuration' time.
When 'numFrames' test is specified, ECPA test is run for
'ecpaControlNumFrames', when 'continous' test is specified,
ECPA test is run until an explicit 'ecpaControlAction' of 'stop'
of received."
::= { ecpaControlEntry 3 }
ecpaControlNumFrames OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the number of frames
for traffic generation. Traffic Generation will be completed
after the specified number of frames are transmitted."
::= { ecpaControlEntry 4 }
ecpaControlDuration OBJECT-TYPE
SYNTAX Integer32 (0..259200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the time in seconds
for traffic generation. Traffic Generation will be stopped
after the specified time interval is exhausted."
::= { ecpaControlEntry 5 }
ecpaControlInjectorDirection OBJECT-TYPE
SYNTAX TrafficDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the direction of
traffic generation. This value must be specified if the
interface is used for traffic generation. Both of
ecpaControlInjectorDirection and ecpaControlMonitorDirection must be
specified."
::= { ecpaControlEntry 6 }
ecpaControlMonitorDirection OBJECT-TYPE
SYNTAX TrafficDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the direction of
receival of generated traffic. This value must be specified if the
interface is used for receiving/monitoring generated traffic.
Both of ecpaControlInjectorDirection and ecpaControlMonitorDirection
must be specified."
::= { ecpaControlEntry 7 }
ecpaControlStream1 OBJECT-TYPE
SYNTAX Integer32 (0..48)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream1. Non 0 value indicates the
selected ECPA stream."
::= { ecpaControlEntry 8 }
ecpaControlStream2 OBJECT-TYPE
SYNTAX Integer32 (0..48)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream2. Non 0 value indicates the
selected ECPA stream."
::= { ecpaControlEntry 9 }
ecpaControlStream3 OBJECT-TYPE
SYNTAX Integer32 (0..48)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream3. Non 0 value indicates the
selected ECPA stream."
::= { ecpaControlEntry 10 }
ecpaControlAction OBJECT-TYPE
SYNTAX EcpaControlAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables starting/stopping of traffic generation
as well as resetting of monitored streams. This object may
not be specified at configuration creation time - in this
case it will take the value of `none'. This allows manager
to explicitly control the start and stop of traffic
generation/monitoring activity.
Value of `stop' is invalid if the activity is specified but
not started. Value of `start' is valid during creation time,
as well as when activity is already stopped. Specification
of `reset' resets the specified streams to default values,
as well as clears the control specification. Get on this
variable gives the most recent SNMP set specification."
::= { ecpaControlEntry 11 }
ecpaControlTestStatus OBJECT-TYPE
SYNTAX EcpaTestStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current status of test set configuration
entry. Upon creation, the status has a value of `initial'; the
status changes to `in-progress' upon ecpaControlAction
indicating `start'; the status changes to `completed' upon
ecpaControlAction indicating stop, as well as when
the specified test generation completes
autonomously upon completion of number of frames or
completion of specified time interval."
::= { ecpaControlEntry 12 }
ecpaControlStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { ecpaControlEntry 13 }
ecpaControlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of ecpaControlRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ecpaControlRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ecpaControlRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { ecpaControlEntry 14 }
ecpaControlEcpaType OBJECT-TYPE
SYNTAX EcpaType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ECPA test can run in a regular mode(1) or enhaced mode (2)."
::= { ecpaControlEntry 15 }
ecpaControlMonitorPortType OBJECT-TYPE
SYNTAX EcpaMonitorPortType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ECPA monitor port type."
::= { ecpaControlEntry 16 }
--
-- Etherjack Connection Performance Analyzer Stream Table
--
ecpaConfigStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF EcpaConfigStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the configuration of Etherjack Connection
Performance Analyzer Stream Specifications."
::= { cmServAssuranceObjects 2 }
ecpaConfigStreamEntry OBJECT-TYPE
SYNTAX EcpaConfigStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ecpaConfigStreamTable."
INDEX { ecpaConfigStreamIndex }
::= { ecpaConfigStreamTable 1 }
EcpaConfigStreamEntry ::= SEQUENCE {
ecpaConfigStreamIndex Integer32,
ecpaConfigStreamName DisplayString,
ecpaConfigStreamFrameSize Integer32,
ecpaConfigStreamRate Unsigned32,
ecpaConfigStreamPayloadType EcpaPayloadType,
ecpaConfigStreamSignature DisplayString,
ecpaConfigStreamDestinationMAC MacAddress,
ecpaConfigStreamSourceMAC MacAddress,
ecpaConfigStreamOuterVlanEnabled TruthValue,
ecpaConfigStreamOuterVlanId VlanId,
ecpaConfigStreamOuterVlanPrio VlanPriority,
ecpaConfigStreamOuterVlanEtherType Integer32,
ecpaConfigStreamInnerVlanEnabled TruthValue,
ecpaConfigStreamInnerVlanId VlanId,
ecpaConfigStreamInnerVlanPrio VlanPriority,
ecpaConfigStreamInnerVlanEtherType Integer32,
ecpaConfigStreamIpVersion IpVersion,
ecpaConfigStreamIpV4Address IpAddress,
ecpaConfigStreamIpV6Address Ipv6Address,
ecpaConfigStreamPrioMapMode IpPriorityMapMode,
ecpaConfigStreamPrioVal Integer32,
ecpaConfigStreamInnerVlan2Enabled TruthValue,
ecpaConfigStreamInnerVlan2Id VlanId,
ecpaConfigStreamInnerVlan2Prio VlanPriority,
ecpaConfigStreamInnerVlan2EtherType Integer32,
ecpaConfigStreamDestIpV4Address IpAddress,
ecpaConfigStreamDestIpV6Address Ipv6Address,
ecpaConfigStreamUsePortSourceMAC TruthValue,
ecpaConfigStreamRateHi Unsigned32,
ecpaConfigStreamUdpControl TruthValue,
ecpaConfigStreamUdpSrcPort Integer32,
ecpaConfigStreamUdpDstPort Integer32
}
ecpaConfigStreamIndex OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this Etherjack Connection Performance Analyzer."
::= { ecpaConfigStreamEntry 1 }
ecpaConfigStreamName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Symbolic Stream Name that can be associated with an ECPA stream."
::= { ecpaConfigStreamEntry 2 }
ecpaConfigStreamFrameSize OBJECT-TYPE
SYNTAX Integer32 (64..9612)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of fixed length frame size
in bytes for traffic generation. If not specified, default value
of 64 bytes is used.
CM Aggregation Product limits the upper range value to 9600."
::= { ecpaConfigStreamEntry 3 }
ecpaConfigStreamRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object enables specification of the traffic generation rate."
::= { ecpaConfigStreamEntry 4 }
ecpaConfigStreamPayloadType OBJECT-TYPE
SYNTAX EcpaPayloadType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of type of payload to generate
`fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes.
`random' type indicates traffic generation with pseudo-random
pattern."
::= { ecpaConfigStreamEntry 5 }
ecpaConfigStreamSignature OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates an 8-byte signature specified by the user in
hexadecimal or ASCII format. This signature is currently
used by the FSP150Mx products for test frame recognition and
will be appended directly after the ECPA Signature in the test
frame and be 4-byte aligned.
This will allow the F3 ECPA feature to interoperate with the
existing FSP150Mx products.
Hexadecimal signature must be prefixed with 0x/0X."
::= { ecpaConfigStreamEntry 6 }
ecpaConfigStreamDestinationMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of destination MAC in the generated
traffic."
::= { ecpaConfigStreamEntry 7 }
ecpaConfigStreamSourceMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of source MAC in the generated
traffic."
::= { ecpaConfigStreamEntry 8 }
ecpaConfigStreamOuterVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is mandatory."
::= { ecpaConfigStreamEntry 9 }
ecpaConfigStreamOuterVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outer VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 10 }
ecpaConfigStreamOuterVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outer VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 11 }
ecpaConfigStreamOuterVlanEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType associated with the Outer VLAN Tag. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 12 }
ecpaConfigStreamInnerVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is mandatory."
::= { ecpaConfigStreamEntry 13 }
ecpaConfigStreamInnerVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 14 }
ecpaConfigStreamInnerVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 15 }
ecpaConfigStreamInnerVlanEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType associated with the Inner VLAN Tag. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled."
::= { ecpaConfigStreamEntry 16 }
ecpaConfigStreamIpVersion OBJECT-TYPE
SYNTAX IpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of IP data in the generated
test traffic. Value of `ipv4' allows test data to be
IP v4 compatible.
Value of `ipv6' allows test data to be IP v6 compatible."
::= { ecpaConfigStreamEntry 17 }
ecpaConfigStreamIpV4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of ipv4 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv4."
::= { ecpaConfigStreamEntry 18 }
ecpaConfigStreamIpV6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of ipv6 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv6."
::= { ecpaConfigStreamEntry 19 }
ecpaConfigStreamPrioMapMode OBJECT-TYPE
SYNTAX IpPriorityMapMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Mapping Mode for
the test stream."
::= { ecpaConfigStreamEntry 20 }
ecpaConfigStreamPrioVal OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Value for
ecpaConfigStreamPrioMapMode as TOS/DSCP."
::= { ecpaConfigStreamEntry 21 }
ecpaConfigStreamInnerVlan2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of a VLAN tagged ECPA stream. This variable
enables the second(inner) VLAN specification, in the case of a
3-tagged ECPA stream. If a three tagged ECPA stream is
desired, this specification is mandatory."
::= { ecpaConfigStreamEntry 22 }
ecpaConfigStreamInnerVlan2Id OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner (second) VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled."
::= { ecpaConfigStreamEntry 23 }
ecpaConfigStreamInnerVlan2Prio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner (second) VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled."
::= { ecpaConfigStreamEntry 24 }
ecpaConfigStreamInnerVlan2EtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType associated with the Inner (second) VLAN Tag. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled."
::= { ecpaConfigStreamEntry 25 }
ecpaConfigStreamDestIpV4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of destination ipv4 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv4."
::= { ecpaConfigStreamEntry 26 }
ecpaConfigStreamDestIpV6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of destination ipv6 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv6."
::= { ecpaConfigStreamEntry 27 }
ecpaConfigStreamUsePortSourceMAC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object when not enabled indicates that
MAC Address specified by ecpaConfigStreamSourceMAC as the source MAC
Address of the ECPA test stream.
For EGX, if enabled indicates that the corresponding ECPA test stream
will use the associated Source Port's MAC Address.
For GE110 products and CC products, if enabled indicates that the corresponding ECPA test stream
will use the associated Source Port's Diagnostic MAC Address."
::= { ecpaConfigStreamEntry 28 }
ecpaConfigStreamRateHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object enables specification of the higher 32 bits of the traffic generation rate."
::= { ecpaConfigStreamEntry 29 }
ecpaConfigStreamUdpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables UDP header."
::= { ecpaConfigStreamEntry 30 }
ecpaConfigStreamUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When UDP control is enabled, this object provides the UDP source port. Otherwize it is ignored."
::= { ecpaConfigStreamEntry 31 }
ecpaConfigStreamUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When UDP control is enabled, this object provides the UDP destination port. Otherwize it is ignored."
::= { ecpaConfigStreamEntry 32 }
--- ECPA Test Streams Table
ecpaTestStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF EcpaTestStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing results of a previous test."
::= { cmServAssuranceObjects 3 }
ecpaTestStreamEntry OBJECT-TYPE
SYNTAX EcpaTestStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ecpaTestStreamTable. Entries in this
table show results of the current ECPA test."
INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex,
ecpaTestStreamIndex }
::= { ecpaTestStreamTable 1 }
EcpaTestStreamEntry ::= SEQUENCE {
ecpaTestStreamIndex Integer32,
ecpaTestStreamSourcePort VariablePointer,
ecpaTestStreamName DisplayString,
ecpaTestStreamFrameSize Integer32,
ecpaTestStreamRate Unsigned32,
ecpaTestStreamPayloadType EcpaPayloadType,
ecpaTestStreamSignature DisplayString,
ecpaTestStreamDestinationMAC MacAddress,
ecpaTestStreamSourceMAC MacAddress,
ecpaTestStreamOuterVlanEnabled TruthValue,
ecpaTestStreamOuterVlanId VlanId,
ecpaTestStreamOuterVlanPrio VlanPriority,
ecpaTestStreamOuterVlanEtherType Integer32,
ecpaTestStreamInnerVlanEnabled TruthValue,
ecpaTestStreamInnerVlanId VlanId,
ecpaTestStreamInnerVlanPrio VlanPriority,
ecpaTestStreamInnerVlanEtherType Integer32,
ecpaTestStreamIpVersion IpVersion,
ecpaTestStreamIpV4Address IpAddress,
ecpaTestStreamIpV6Address Ipv6Address,
ecpaTestStreamPrioMapMode IpPriorityMapMode,
ecpaTestStreamPrioVal Integer32,
ecpaTestStreamMonStartTime DateAndTime,
ecpaTestStreamMonEndTime DateAndTime,
ecpaTestStreamMonElapsedTime Integer32,
ecpaTestStreamMonTxFrames PerfCounter64,
ecpaTestStreamMonRxFrames PerfCounter64,
ecpaTestStreamMonRxPercentSuccess Integer32,
ecpaTestStreamMonRxOutOfSeqErrs PerfCounter64,
ecpaTestStreamMonRxSeqGaps PerfCounter64,
ecpaTestStreamMonRxNonEcpaFrames PerfCounter64,
ecpaTestStreamMonRxMinDelay Unsigned32,
ecpaTestStreamMonRxMaxDelay Unsigned32,
ecpaTestStreamMonRxAvgDelay Unsigned32,
ecpaTestStreamMonRx1stFrameSize Integer32,
ecpaTestStreamMonRx1stFrame1Octets DisplayString,
ecpaTestStreamMonRx1stFrame2Octets DisplayString,
ecpaTestStreamMonRx1stFrame3Octets DisplayString,
ecpaTestStreamMonRx1stFrame4Octets DisplayString,
ecpaTestStreamMonRx1stFrame5Octets DisplayString,
ecpaTestStreamMonRx1stFrame6Octets DisplayString,
ecpaTestStreamMonRx1stFrame7Octets DisplayString,
ecpaTestStreamMonRx1stFrame8Octets DisplayString,
ecpaTestStreamMonRx1stFrame9Octets DisplayString,
ecpaTestStreamMonRx1stFrame10Octets DisplayString,
ecpaTestStreamMonRxBitRate PerfCounter64,
--added for EG-X product
ecpaTestStreamInnerVlan2Enabled TruthValue,
ecpaTestStreamInnerVlan2Id VlanId,
ecpaTestStreamInnerVlan2Prio VlanPriority,
ecpaTestStreamInnerVlan2EtherType Integer32,
ecpaTestStreamDestIpV4Address IpAddress,
ecpaTestStreamDestIpV6Address Ipv6Address,
ecpaTestStreamConfigChanged TruthValue,
ecpaTestStreamRateHi Unsigned32,
ecpaTestStreamUdpControl TruthValue,
ecpaTestStreamUdpSrcPort Integer32,
ecpaTestStreamUdpDstPort Integer32
}
ecpaTestStreamIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value corresponding to the stream index
for which the ECPA test was initiated."
::= { ecpaTestStreamEntry 1 }
ecpaTestStreamSourcePort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value corresponding to the ifIndex
for which the ECPA test was initiated."
::= { ecpaTestStreamEntry 2 }
ecpaTestStreamName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Symbolic Stream Name that can be associated with an ECPA stream."
::= { ecpaTestStreamEntry 3 }
ecpaTestStreamFrameSize OBJECT-TYPE
SYNTAX Integer32 (64..9612)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of fixed length frame size
in bytes for traffic generation. If not specified, default value
of 64 bytes is used."
::= { ecpaTestStreamEntry 4 }
ecpaTestStreamRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object enables specification of the traffic generation rate."
::= { ecpaTestStreamEntry 5 }
ecpaTestStreamPayloadType OBJECT-TYPE
SYNTAX EcpaPayloadType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of type of payload to generate
`fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes.
`random' type indicates traffic generation with pseudo-random
pattern."
::= { ecpaTestStreamEntry 6 }
ecpaTestStreamSignature OBJECT-TYPE
SYNTAX DisplayString (SIZE (10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates an 8-byte signature specified by the user in
hexadecimal or ASCII format. This signature is currently
used by the FSP150Mx products for test frame recognition and
will be appended directly after the ECPA Signature in the test
frame and be 4-byte aligned.
This will allow the F3 ECPA feature to interoperate with the
existing FSP150Mx products.
Hexadecimal signature must be prefixed with 0x/0X."
::= { ecpaTestStreamEntry 7 }
ecpaTestStreamDestinationMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of destination MAC in the generated
traffic."
::= { ecpaTestStreamEntry 8 }
ecpaTestStreamSourceMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of source MAC in the generated
traffic."
::= { ecpaTestStreamEntry 9 }
ecpaTestStreamOuterVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is mandatory."
::= { ecpaTestStreamEntry 10 }
ecpaTestStreamOuterVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outer VLAN Id associated with the ECPA stream. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled."
::= { ecpaTestStreamEntry 11 }
ecpaTestStreamOuterVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outer VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled."
::= { ecpaTestStreamEntry 12 }
ecpaTestStreamOuterVlanEtherType OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType associated with the Outer VLAN Tag. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled."
::= { ecpaTestStreamEntry 13 }
ecpaTestStreamInnerVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is mandatory."
::= { ecpaTestStreamEntry 14 }
ecpaTestStreamInnerVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner VLAN Id associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled."
::= { ecpaTestStreamEntry 15 }
ecpaTestStreamInnerVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled."
::= { ecpaTestStreamEntry 16 }
ecpaTestStreamInnerVlanEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType associated with the Inner VLAN Tag. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled."
::= { ecpaTestStreamEntry 17 }
ecpaTestStreamIpVersion OBJECT-TYPE
SYNTAX IpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of IP data in the generated
test traffic. Value of `ipv4' allows test data to be
IP v4 compatible.
Value of `ipv6' allows test data to be IP v6 compatible."
::= { ecpaTestStreamEntry 18 }
ecpaTestStreamIpV4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of ipv4 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv4."
::= { ecpaTestStreamEntry 19 }
ecpaTestStreamIpV6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of ipv6 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv6."
::= { ecpaTestStreamEntry 20 }
ecpaTestStreamPrioMapMode OBJECT-TYPE
SYNTAX IpPriorityMapMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Mapping Mode for
the test stream."
::= { ecpaTestStreamEntry 21 }
ecpaTestStreamPrioVal OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Value for
ecpaTestStreamPrioMapMode as TOS/DSCP."
::= { ecpaTestStreamEntry 22 }
ecpaTestStreamMonStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the ECPA test for this stream."
::= { ecpaTestStreamEntry 23 }
ecpaTestStreamMonEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The end time of the ECPA test for this stream."
::= { ecpaTestStreamEntry 24 }
ecpaTestStreamMonElapsedTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of ECPA test for this stream in seconds."
::= { ecpaTestStreamEntry 25 }
ecpaTestStreamMonTxFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted(generated) so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 26 }
ecpaTestStreamMonRxFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 27 }
ecpaTestStreamMonRxPercentSuccess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received frames as a percentage of transmitted frames.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 28 }
ecpaTestStreamMonRxOutOfSeqErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out of sequence errors received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 29 }
ecpaTestStreamMonRxSeqGaps OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sequence gaps received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 30 }
ecpaTestStreamMonRxNonEcpaFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of non ECPA frames received during the execution."
::= { ecpaTestStreamEntry 31 }
ecpaTestStreamMonRxMinDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state."
::= { ecpaTestStreamEntry 32 }
ecpaTestStreamMonRxMaxDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state."
::= { ecpaTestStreamEntry 33 }
ecpaTestStreamMonRxAvgDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state."
::= { ecpaTestStreamEntry 34 }
ecpaTestStreamMonRx1stFrameSize OBJECT-TYPE
SYNTAX Integer32 (64..9612)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame size of the Monitored First Frame."
::= { ecpaTestStreamEntry 35 }
ecpaTestStreamMonRx1stFrame1Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - first 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 36 }
ecpaTestStreamMonRx1stFrame2Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 37 }
ecpaTestStreamMonRx1stFrame3Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 38 }
ecpaTestStreamMonRx1stFrame4Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 39 }
ecpaTestStreamMonRx1stFrame5Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 40 }
ecpaTestStreamMonRx1stFrame6Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 41 }
ecpaTestStreamMonRx1stFrame7Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 42 }
ecpaTestStreamMonRx1stFrame8Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 43 }
ecpaTestStreamMonRx1stFrame9Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 44 }
ecpaTestStreamMonRx1stFrame10Octets OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state."
::= { ecpaTestStreamEntry 45 }
ecpaTestStreamMonRxBitRate OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object provides the average bit rate on the ECPA test stream."
::= { ecpaTestStreamEntry 46 }
ecpaTestStreamInnerVlan2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the second(inner) VLAN specification, in the case of a
3-tagged ECPA stream. If a three tagged ECPA stream is
desired, this indicates true."
::= { ecpaTestStreamEntry 47 }
ecpaTestStreamInnerVlan2Id OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable provides the Inner (second) VLAN Id associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled."
::= { ecpaTestStreamEntry 48 }
ecpaTestStreamInnerVlan2Prio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable provides the Inner (second) VLAN Priority associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled."
::= { ecpaTestStreamEntry 49 }
ecpaTestStreamInnerVlan2EtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable provides the EtherType associated with the Inner (second) VLAN Tag.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled."
::= { ecpaTestStreamEntry 50 }
ecpaTestStreamDestIpV4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the destination ipv4 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv4."
::= { ecpaTestStreamEntry 51 }
ecpaTestStreamDestIpV6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the destination ipv6 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv6."
::= { ecpaTestStreamEntry 52 }
ecpaTestStreamConfigChanged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides information on whether the associated ecpaConfigStream is changed."
::= { ecpaTestStreamEntry 53 }
ecpaTestStreamRateHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object enables specification of the higher 32 bits of the traffic generation rate."
::= { ecpaTestStreamEntry 54 }
ecpaTestStreamUdpControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables UDP header."
::= { ecpaTestStreamEntry 55 }
ecpaTestStreamUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When UDP control is enabled, this object provides the UDP source port. Otherwize it is ignored."
::= { ecpaTestStreamEntry 56 }
ecpaTestStreamUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When UDP control is enabled, this object provides the UDP destination port. Otherwize it is ignored."
::= { ecpaTestStreamEntry 57 }
--
-- ESA Probe Table
--
esaProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to ESA Probes."
::= { cmServAssuranceObjects 4 }
esaProbeEntry OBJECT-TYPE
SYNTAX EsaProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeTable. Entries can
be created in this table by management application action.
The slotIndex should be 255 if the product is cm5.1."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex }
::= { esaProbeTable 1 }
EsaProbeEntry ::= SEQUENCE {
-- identification
esaProbeIndex Integer32,
esaProbeName DisplayString,
esaProbeSourcePort VariablePointer,
esaProbeAssocSchedGroup VariablePointer,
esaProbeDirection EsaProbeDirection,
-- protocol, end-points
esaProbeProtocol EsaProbeProtocol,
esaProbeSrcIpAddress IpAddress,
esaProbeSrcSubnetMask IpAddress,
esaProbeDestIpAddress IpAddress,
esaProbeSrcMep VariablePointer,
esaProbeDestMepType MepDestinationType,
esaProbeDestMepMacAddr MacAddress,
esaProbeDestMepId Dot1agCfmMepIdOrZero,
-- service params
esaProbeVlanTagEnabled TruthValue,
esaProbeVlanTagEtherType Unsigned32,
esaProbeVlanId VlanId,
esaProbeVlanPrio VlanPriority,
esaProbeInnerVlanTagEnabled TruthValue,
esaProbeInnerVlanTagEtherType Unsigned32,
esaProbeInnerVlanId VlanId,
esaProbeInnerVlanPrio VlanPriority,
esaProbeIpPrioMapMode IpPriorityMapMode,
esaProbeIpPriority Integer32,
--sched params
esaProbePktsPerSample Integer32,
esaProbePktSize Integer32,
esaProbeInterPktGap Integer32,
esaProbePktDeadInterval Integer32,
esaProbeResponseTimeout Integer32,
esaProbeY1731DmmPktSize Integer32,
esaProbeY1731LmmInterval EsaProbePktIntervalType,
esaProbeY1731DmmInterval EsaProbePktIntervalType,
--history config
esaProbeHistoryBins Integer32,
esaProbeHistoryInterval EsaProbeHistoryIntervalType,
esaProbeDistHistoryBins Integer32,
esaProbeDistHistoryInterval EsaProbeHistoryIntervalType,
--general params
esaProbeCreationTime DateAndTime,
-- probe creation params
esaProbeStorageType StorageType,
esaProbeRowStatus RowStatus,
-- multi-cos, multi-dest params
esaProbeMultiCOSEnabled TruthValue,
esaProbeSLAMonitorType EsaProbeSLAMonitorType,
esaProbeCOSType ClassOfServiceType,
esaProbeSLMMulticastMACEnabled TruthValue,
esaProbeSOAMInterval EsaProbePktIntervalType,
esaProbeSOAMPktSize Integer32,
--added for cm5.1
esaProbeInner2VlanTagEnabled TruthValue,
esaProbeInner2VlanTagEtherType Unsigned32,
esaProbeInner2VlanId VlanId,
esaProbeInner2VlanPrio VlanPriority,
-- State Management params
esaProbeAdminState AdminState,
esaProbeOperationalState OperationalState,
esaProbeSecondaryState SecondaryState,
esaProbeMacAddress MacAddress,
esaProbeAlias DisplayString
}
esaProbeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
this ESA Probe within a Card."
::= { esaProbeEntry 1 }
esaProbeName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique identifier used by the Manager to distinguish
the ESA Probe."
::= { esaProbeEntry 2 }
esaProbeSourcePort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object points to the Port to which the ESA Probe
is attached, i.e.on which the service to be monitored resides."
::= { esaProbeEntry 3 }
esaProbeAssocSchedGroup OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object points to the probe's associated Scheduled Group.
Initially, when the probe is not associated with a Group,
this object's value is set to {0.0}."
::= { esaProbeEntry 4 }
esaProbeDirection OBJECT-TYPE
SYNTAX EsaProbeDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows to specify the direction of Probe
traffic generation."
::= { esaProbeEntry 5 }
esaProbeProtocol OBJECT-TYPE
SYNTAX EsaProbeProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol to be used in ESA Probe messages.
'icmpTimestamp', 'icmpEcho', 'udpEcho' protocols support
layer-3 ethernet service assurance. If the remote reflector
is an ADVA equipment based on CM family of products,
one-way loss measurement, one-way delay measurement,
round-trip delay measurement and one-way jitter measurements
are computed. Else, only round-trip delay measurements are
applicable.
'y1731' protocol can be used for layer-2 ethernet service
assurance. One-way loss measurement, one-way and round-trip
delay measurement, and one-way jitter measurements are
available for this protocol.
'y1731-slm-slr' protocol can be used for layer-2 ethernet service
assurance using Synthetic Loss Measurement messages. One-way
loss measurement, one-way and round-trip delay measurement,
and one-way jitter measurements are available for this protocol."
::= { esaProbeEntry 6 }
esaProbeSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Variable that allows specification of the Probe's source
IP Address. This IP Address is used in the IP header of
the ESA Probe generated packets, as source address.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 7 }
esaProbeSrcSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Variable that allows specification of the Probe's source
IP Subnet Mask.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 8 }
esaProbeDestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Variable that allows specification of the Reflector's
destination IP Address. This IP Address is used in the IP header
of the ESA Probe generated packets, as destination address.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 9 }
esaProbeSrcMep OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. It identifies
the source MEP that initiates the Y.1731 LMMs and DMMs."
::= { esaProbeEntry 10 }
esaProbeDestMepType OBJECT-TYPE
SYNTAX MepDestinationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. This indicates
if the destination MEP is specified using the MEP ID object
esaProbeDestMepId."
::= { esaProbeEntry 11 }
esaProbeDestMepMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. It identifies
the destination MEP that responds to the LMMs and DMMs. This
MAC address will be the destination MAC address for LMM and DMM
frames if esaProbeY1731DestMepType is 'macaddress'. If CC protocol is
not enabled between source and destination MEP then this is the
only choice to identify the remote MEP."
::= { esaProbeEntry 12 }
esaProbeDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. It identifies
the destination MEP that responds to the LMMs and DMMs. The MAC
address of this RMEP ID from RMEP database will be the destination
MAC address for LMM and DMM. This value is used only if the
esaProbeY1731DestMepType is 'mepid'. CC protocol must be
enabled between source and destination MEP if the RMEP ID
is used to identify the Remote MEP."
::= { esaProbeEntry 13 }
esaProbeVlanTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ability to specify whether or not to use VLAN tagged or untagged
ESA traffic generation on the Probe.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 14 }
esaProbeVlanTagEtherType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's VLAN tag Ether Type.
Valid if 'esaProbeVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 15 }
esaProbeVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's VLAN tag. Valid if 'esaProbeVlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 16 }
esaProbeVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's VLAN priority. Valid if
'esaProbeVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 17 }
esaProbeInnerVlanTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ability to specify whether or not to use Inner VLAN tag.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 18 }
esaProbeInnerVlanTagEtherType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner VLAN tag Ether Type.
Valid if 'esaProbeInnerVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 19 }
esaProbeInnerVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner VLAN tag. Valid if 'esaProbeInnerVlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 20 }
esaProbeInnerVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner VLAN priority. Valid if
'esaProbeInnerVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 21 }
esaProbeIpPrioMapMode OBJECT-TYPE
SYNTAX IpPriorityMapMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Mapping Mode for
the ESA Probe.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 22 }
esaProbeIpPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Value for
esaProbePrioMapMode as priomap-tos,priomap-dscp.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 23 }
esaProbePktsPerSample OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of number of packets within
a sample run for ESA traffic generation. A non-zero value
must be specified.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 24 }
esaProbePktSize OBJECT-TYPE
SYNTAX Integer32 (0|64..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of fixed length frame size
in bytes for ESA traffic generation. If not specified, default value
of 104 bytes is used.
NOTE: This attribute is not available to Y.1731 probes."
::= { esaProbeEntry 25 }
esaProbeInterPktGap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of interval in milliseconds between
packet generation. A non-zero value must be specified.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 26 }
esaProbePktDeadInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the dead interval in seconds
after 'esaProbePktsPerSample' have been generated within the sample.
This allows for settling time of the ESA traffic.
A non-zero value must be specified.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 27 }
esaProbeResponseTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of the timeout value to
determine lost packets. Time specified in seconds.
NOTE: This attribute is not applicable to Y.1731 probes.
This object is applicable to Layer 3 and SLM/SLR Probes."
::= { esaProbeEntry 28 }
esaProbeY1731DmmPktSize OBJECT-TYPE
SYNTAX Integer32 (0|64..9600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only applicable to Y.1731 probes.
This object enables specification of the TLV size for
Delay Measurement Frames (DMMs).
Value of 0 is a read-only value when the Probe protocol is not y1731.
GE206 Release 4.4.x supports 2000 bytes"
::= { esaProbeEntry 29 }
esaProbeY1731LmmInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"LMM frame transmission period.
For Loss Measurement Frames, only interval-1sec is supported.
This attribute is only applicable to Y.1731 probes."
DEFVAL { interval-1sec }
::= { esaProbeEntry 30 }
esaProbeY1731DmmInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DMM frame transmission period.
This attribute is only applicable to Y.1731 probes."
DEFVAL { interval-100ms }
::= { esaProbeEntry 31 }
esaProbeHistoryBins OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of number of history bins.
This is the total history data that will be maintained
for an ESA Probe run, at any instance."
::= { esaProbeEntry 32 }
esaProbeHistoryInterval OBJECT-TYPE
SYNTAX EsaProbeHistoryIntervalType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of the history interval
period."
::= { esaProbeEntry 33 }
esaProbeDistHistoryBins OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of number of distribution
history bins. This is the total history distribution data that
will be maintained for an ESA Probe run, at any instance."
::= { esaProbeEntry 34 }
esaProbeDistHistoryInterval OBJECT-TYPE
SYNTAX EsaProbeHistoryIntervalType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of the history distribution
interval period."
::= { esaProbeEntry 35 }
esaProbeCreationTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the creation time of the ESA Probe."
::= { esaProbeEntry 36 }
esaProbeStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { esaProbeEntry 37 }
esaProbeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of esaProbeRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
esaProbeRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The esaProbeRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { esaProbeEntry 38 }
esaProbeMultiCOSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is introduced for FSP150CC Release 4.3.
This object is only applicable for Y.1731 and
SLM-SLR Probe Protocol Types. This object can be used
to specify the multiple class of services (COS) for each
ESA Probe."
::= { esaProbeEntry 39 }
esaProbeSLAMonitorType OBJECT-TYPE
SYNTAX EsaProbeSLAMonitorType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the Probe is a point-to-point type
or a point-to-multipoint type. Only SLM-SLR probes can be
point-to-multipoint."
::= { esaProbeEntry 40 }
esaProbeCOSType OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be used to specify the first Class of Service associated with
the Y.1731/SLM-SLR ESA Probe. In the case of a multiCOS Probe, this object
has no semantics when multiple COS levels exist. This object is only valid for
Y.1731/SLM-SLR ESA Probes."
::= { esaProbeEntry 41 }
esaProbeSLMMulticastMACEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be used to specify whether the SLM/SLR protocol Probe will use
multicast MAC address in SLM (Synthetic Loss Measurement) messages.
This object is only valid for SLM-SLR ESA Probes."
::= { esaProbeEntry 42 }
esaProbeSOAMInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be used to specify the packet interval type for Y.1731 LM/DM
and SLM/SLR based ESA Probes, for the first Class of Service.
In the case of a multiCOS Probe, this object has no semantics
when multiple COS levels exist.
This attribute is applicable for Y.1731 LM/DM and SLM/SLR based probes."
::= { esaProbeEntry 43 }
esaProbeSOAMPktSize OBJECT-TYPE
SYNTAX Integer32 (0|64..9612)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to specify the packet size for SLM-SLR based ESA Probes,
for the first Class of Service. In the case of multiCOS Probe, this object has
no semantics when multiple COS levels exist. In such cases this will return
a value of 0."
::= { esaProbeEntry 44 }
esaProbeInner2VlanTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ability to specify whether or not to use Inner2 VLAN tag.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 45 }
esaProbeInner2VlanTagEtherType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner2 VLAN tag Ether Type.
Valid if 'esaProbeInner2VlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 46 }
esaProbeInner2VlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner2 VLAN tag. Valid if 'esaProbeInner2VlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 47 }
esaProbeInner2VlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to specify the
monitored service's Inner2 VLAN priority. Valid if
'esaProbeInner2VlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes."
::= { esaProbeEntry 48 }
-- State Management params
esaProbeAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Administrative State of the ESA Probe.
This is not externally managed."
::= { esaProbeEntry 49 }
esaProbeOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the ESA Probe."
::= { esaProbeEntry 50 }
esaProbeSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the ESA Probe."
::= { esaProbeEntry 51 }
esaProbeMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. It identifies
the destination MacAddress which esa using "
::= { esaProbeEntry 52 }
esaProbeAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows SNMP management entities to provide an
alias for an ESA Probe."
::= { esaProbeEntry 53 }
--
-- ESA Probe Schedule Group Table
--
esaProbeScheduleGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeScheduleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that allow groups of ESA Probes
to be scheduled."
::= { cmServAssuranceObjects 5 }
esaProbeScheduleGroupEntry OBJECT-TYPE
SYNTAX EsaProbeScheduleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in esaProbeScheduleGroupTable. Entries are created
in this table by management application action."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeScheduleGroupIndex }
::= { esaProbeScheduleGroupTable 1 }
EsaProbeScheduleGroupEntry ::= SEQUENCE {
esaProbeScheduleGroupIndex Integer32,
esaProbeScheduleGroupDescr DisplayString,
esaProbeScheduleGroupProbeList DisplayString,
esaProbeScheduleGroupType ScheduleType,
esaProbeScheduleGroupStartTime DateAndTime,
esaProbeScheduleGroupDuration Unsigned32,
esaProbeScheduleGroupInterval Unsigned32,
esaProbeScheduleGroupAction EsaAction,
esaProbeScheduleGroupStatus SchedActivityStatus,
esaProbeScheduleGroupStorageType StorageType,
esaProbeScheduleGroupRowStatus RowStatus,
esaProbeScheduleGroupActionProbeList DisplayString
}
esaProbeScheduleGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique index to distinguish the ESA Probe Schedule Group."
::= { esaProbeScheduleGroupEntry 1 }
esaProbeScheduleGroupDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description of the probe schedule group."
::= { esaProbeScheduleGroupEntry 2 }
esaProbeScheduleGroupProbeList OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..512))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A comma separated list of esaProbeName's, that will have the
same schedule."
::= { esaProbeScheduleGroupEntry 3 }
esaProbeScheduleGroupType OBJECT-TYPE
SYNTAX ScheduleType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows to specify whether the ESA probe group
schedule is 'one-shot' or 'periodic'. A 'one-shot' schedule executes only
once and then stops. A 'periodic' schedule reoccurs
every 'esaProbeScheduleGroupInterval' seconds and continues
until explicitly stopped."
::= { esaProbeScheduleGroupEntry 4 }
esaProbeScheduleGroupStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the start time
of the ESA Probe Group. Value of time less than current system
time will equate to current time. When the system time reaches
this configured time, the ESA Probe Group will be activated."
::= { esaProbeScheduleGroupEntry 5 }
esaProbeScheduleGroupDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the duration in
'seconds' for ESA Probe Group run. Note that a value of
4294967295 means Duration as FOREVER.
FOREVER value is only applicable to schedule type oneshot.
The value 4294967295 cannot be used if schedule type is periodic."
::= { esaProbeScheduleGroupEntry 6 }
esaProbeScheduleGroupInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the interval in
'seconds' between successive runs for ESA Probe Group. This
variable is only valid if the 'esaProbeScheduleGroupType' is
'periodic'."
::= { esaProbeScheduleGroupEntry 7 }
esaProbeScheduleGroupAction OBJECT-TYPE
SYNTAX EsaAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to suspend/resume the ESA scheduled group."
::= { esaProbeScheduleGroupEntry 8 }
esaProbeScheduleGroupStatus OBJECT-TYPE
SYNTAX SchedActivityStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of the ESA Probe Group."
::= { esaProbeScheduleGroupEntry 9 }
esaProbeScheduleGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { esaProbeScheduleGroupEntry 10 }
esaProbeScheduleGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of esaProbeScheduleGroupRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
esaProbeRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The esaProbeScheduleGroupRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { esaProbeScheduleGroupEntry 11 }
esaProbeScheduleGroupActionProbeList OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A comma separated list of esaProbeName's, if set esaProbeScheduleGroupAction as add or remove,
they will be add or remove from esaProbeScheduleGroupProbeList."
::= { esaProbeScheduleGroupEntry 12 }
--
-- ESA Reflector Table
--
esaReflectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaReflectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to ESA Reflectors.
NOTE: There is no need to create reflectors for Y.1731 probes as
the MEPs will respond by default."
::= { cmServAssuranceObjects 6 }
esaReflectorEntry OBJECT-TYPE
SYNTAX EsaReflectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaReflectorTable. Entries can
be created in this table by management application action."
INDEX { neIndex, shelfIndex, slotIndex, esaReflectorIndex }
::= { esaReflectorTable 1 }
EsaReflectorEntry ::= SEQUENCE {
esaReflectorIndex Integer32,
esaReflectorName DisplayString,
esaReflectorIpAddress IpAddress,
esaReflectorSubnetMask IpAddress,
esaReflectorSourcePort VariablePointer,
esaReflectorIpPrioMapMode IpPriorityMapMode,
esaReflectorIpPriority Integer32,
esaReflectorAction EsaAction,
esaReflectorSuspended TruthValue,
esaReflectorCreationTime DateAndTime,
esaReflectorStorageType StorageType,
esaReflectorRowStatus RowStatus,
esaReflectorDirection EsaReflectorDirection,
esaReflectorAdminState AdminState,
esaReflectorOperationalState OperationalState,
esaReflectorSecondaryState SecondaryState,
esaReflectorMacAddress MacAddress,
esaReflectorAlias DisplayString
}
esaReflectorIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique index to distinguish the ESA Reflector."
::= { esaReflectorEntry 1 }
esaReflectorName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique identifier to distinguish the ESA Reflector."
::= { esaReflectorEntry 2 }
esaReflectorIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Reflector's IP Address.
Reflector listens for packets destined at this IP Address."
::= { esaReflectorEntry 3 }
esaReflectorSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the
Reflector's IP Subnet mask."
::= { esaReflectorEntry 4 }
esaReflectorSourcePort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object points to the Port to which the ESA Reflector
is attached, i.e.on which the service to be monitored resides."
::= { esaReflectorEntry 5 }
esaReflectorIpPrioMapMode OBJECT-TYPE
SYNTAX IpPriorityMapMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Mapping Mode for
the ESA Reflector."
::= { esaReflectorEntry 6 }
esaReflectorIpPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of Priority Value for
esaReflectorPrioMapMode as priomap-tos,priomap-dscp."
::= { esaReflectorEntry 7 }
esaReflectorAction OBJECT-TYPE
SYNTAX EsaAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to suspend/resume the ESA reflector."
::= { esaReflectorEntry 8 }
esaReflectorSuspended OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the ESA Reflector is active or suspended."
::= { esaReflectorEntry 9 }
esaReflectorCreationTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the creation time of the ESA Reflector."
::= { esaReflectorEntry 10 }
esaReflectorStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { esaReflectorEntry 11 }
esaReflectorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of esaReflectorRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
esaReflectorRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The esaReflectorRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { esaReflectorEntry 12 }
esaReflectorDirection OBJECT-TYPE
SYNTAX EsaReflectorDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object provides the direction of the ESA Reflector."
::= { esaReflectorEntry 13 }
-- State Management params
esaReflectorAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Administrative State of the ESA Reflector.
This is not externally managed."
::= { esaReflectorEntry 14 }
esaReflectorOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the ESA Reflector."
::= { esaReflectorEntry 15 }
esaReflectorSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the ESA Reflector."
::= { esaReflectorEntry 16 }
esaReflectorMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is applicable only for Y.1731 probes. It identifies
the destination MacAddress which esa using "
::= { esaReflectorEntry 17 }
esaReflectorAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows SNMP management entities to provide an
alias for an ESA Reflector."
::= { esaReflectorEntry 18 }
--
-- ESA Probe Current Statistics Table
--
esaProbeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of ESA Probe related statistics kept for
a particular ESA Probe entity. These reflect the
current data."
::= { cmServAssuranceObjects 7 }
esaProbeStatsEntry OBJECT-TYPE
SYNTAX EsaProbeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the esaProbeStatsTable. An entry exists
in this table for each ESA Probe."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex,
esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex, esaProbeStatsIndex }
::= { esaProbeStatsTable 1 }
EsaProbeStatsEntry ::= SEQUENCE {
esaProbeStatsDestinationIndex Integer32,
esaProbeStatsCOSIndex Integer32,
esaProbeStatsIndex Integer32,
esaProbeStatsIntervalType EsaProbePmIntervalType,
esaProbeStatsCOS ClassOfServiceType,
esaProbeStatsValid TruthValue,
esaProbeStatsAction CmPmBinAction,
esaProbeStatsP2RPkts PerfCounter64,
esaProbeStatsP2RErredPkts PerfCounter64,
esaProbeStatsP2RSyncErrs PerfCounter64,
esaProbeStatsP2RLostPkts PerfCounter64,
esaProbeStatsR2PPkts PerfCounter64,
esaProbeStatsR2PErredPkts PerfCounter64,
esaProbeStatsR2PSyncErrs PerfCounter64,
esaProbeStatsR2PLostPkts PerfCounter64,
esaProbeStatsLostPkts PerfCounter64,
esaProbeStatsSeqGaps PerfCounter64,
esaProbeStatsOutOfSeqErrs PerfCounter64,
esaProbeStatsMinRoundTripDelay Unsigned32,
esaProbeStatsMaxRoundTripDelay Unsigned32,
esaProbeStatsAvgRoundTripDelay Unsigned32,
esaProbeStatsSumRoundTripDelay PerfCounter64,
esaProbeStatsSumOfSqRoundTripDelay PerfCounter64,
esaProbeStatsMinOnewayP2RDelay Unsigned32,
esaProbeStatsMaxOnewayP2RDelay Unsigned32,
esaProbeStatsAvgOnewayP2RDelay Unsigned32,
esaProbeStatsSumOnewayP2RDelay PerfCounter64,
esaProbeStatsSumOfSqOnewayP2RDelay PerfCounter64,
esaProbeStatsMinOnewayR2PDelay Unsigned32,
esaProbeStatsMaxOnewayR2PDelay Unsigned32,
esaProbeStatsAvgOnewayR2PDelay Unsigned32,
esaProbeStatsSumOnewayR2PDelay PerfCounter64,
esaProbeStatsSumOfSqOnewayR2PDelay PerfCounter64,
esaProbeStatsMinPosP2RJitter Unsigned32,
esaProbeStatsMaxPosP2RJitter Unsigned32,
esaProbeStatsNumPosP2RJitter PerfCounter64,
esaProbeStatsSumPosP2RJitter PerfCounter64,
esaProbeStatsSumOfSqPosP2RJitter PerfCounter64,
esaProbeStatsMinNegP2RJitter Unsigned32,
esaProbeStatsMaxNegP2RJitter Unsigned32,
esaProbeStatsNumNegP2RJitter PerfCounter64,
esaProbeStatsSumNegP2RJitter PerfCounter64,
esaProbeStatsSumOfSqNegP2RJitter PerfCounter64,
esaProbeStatsMinPosR2PJitter Unsigned32,
esaProbeStatsMaxPosR2PJitter Unsigned32,
esaProbeStatsNumPosR2PJitter PerfCounter64,
esaProbeStatsSumPosR2PJitter PerfCounter64,
esaProbeStatsSumOfSqPosR2PJitter PerfCounter64,
esaProbeStatsMinNegR2PJitter Unsigned32,
esaProbeStatsMaxNegR2PJitter Unsigned32,
esaProbeStatsNumNegR2PJitter PerfCounter64,
esaProbeStatsSumNegR2PJitter PerfCounter64,
esaProbeStatsSumOfSqNegR2PJitter PerfCounter64,
esaProbeStatsY1731P2RNegLossOccurrences PerfCounter64,
esaProbeStatsY1731R2PNegLossOccurrences PerfCounter64,
esaProbeStatsY1731RxLmSamples TruthValue,
esaProbeStatsY1731RxDmSamples TruthValue,
esaProbeStatsY1731P2RFrames PerfCounter64,
esaProbeStatsY1731R2PFrames PerfCounter64,
-- following introduced in R4.4CC
esaProbeStatsAvgAbsP2RJitter Unsigned32,
esaProbeStatsAvgAbsR2PJitter Unsigned32,
esaProbeStatsMaxAbsP2RJitter Unsigned32,
esaProbeStatsMaxAbsR2PJitter Unsigned32,
esaProbeStatsMinAbsP2RJitter Unsigned32,
esaProbeStatsMinAbsR2PJitter Unsigned32,
esaProbeStatsNumAbsP2RJitter PerfCounter64,
esaProbeStatsNumAbsR2PJitter PerfCounter64,
esaProbeStatsSumAbsP2RJitter PerfCounter64,
esaProbeStatsSumAbsR2PJitter PerfCounter64,
esaProbeStatsSumOfSqAbsP2RJitter PerfCounter64,
esaProbeStatsSumOfSqAbsR2PJitter PerfCounter64
}
esaProbeStatsDestinationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported."
::= { esaProbeStatsEntry 1 }
esaProbeStatsCOSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters."
::= { esaProbeStatsEntry 2 }
esaProbeStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this ESA Probe statistics entry.
Index 1 corresponds to current and index 2 to rollover."
::= { esaProbeStatsEntry 3 }
esaProbeStatsIntervalType OBJECT-TYPE
SYNTAX EsaProbePmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of collection, i.e. whether it is
current, or rollover."
::= { esaProbeStatsEntry 4 }
esaProbeStatsCOS OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported."
::= { esaProbeStatsEntry 5 }
esaProbeStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { esaProbeStatsEntry 6 }
esaProbeStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { esaProbeStatsEntry 7 }
esaProbeStatsP2RPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeStatsR2PPkts."
::= { esaProbeStatsEntry 8 }
esaProbeStatsP2RErredPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to resource
limitations (buffers).
This can happen if the Probe Configuration was changed to
send in a large number of packets in a time interval.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeStatsEntry 9 }
esaProbeStatsP2RSyncErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of (time) Synchronization Errors from probe to reflector
in the current interval."
::= { esaProbeStatsEntry 10 }
esaProbeStatsP2RLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost."
::= { esaProbeStatsEntry 11 }
esaProbeStatsR2PPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeStatsP2RPkts."
::= { esaProbeStatsEntry 12 }
esaProbeStatsR2PErredPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after it was
marked as lost (i.e.beyond timeout).
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeStatsEntry 13 }
esaProbeStatsR2PSyncErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of (time) Synchronization Errors from reflector to probe
in the current interval."
::= { esaProbeStatsEntry 14 }
esaProbeStatsR2PLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost."
::= { esaProbeStatsEntry 15 }
esaProbeStatsLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeStatsEntry 16 }
esaProbeStatsSeqGaps OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is termed as a sequence gap.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeStatsEntry 17 }
esaProbeStatsOutOfSeqErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is termed as out of sequence error.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeStatsEntry 18 }
esaProbeStatsMinRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeStatsEntry 19 }
esaProbeStatsMaxRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeStatsEntry 20 }
esaProbeStatsAvgRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeStatsEntry 21 }
esaProbeStatsSumRoundTripDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeStatsEntry 22 }
esaProbeStatsSumOfSqRoundTripDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of round trip delays in the current interval."
::= { esaProbeStatsEntry 23 }
esaProbeStatsMinOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 24 }
esaProbeStatsMaxOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 25 }
esaProbeStatsAvgOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 26 }
esaProbeStatsSumOnewayP2RDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of one-way delay from source to
destination in the current interval."
::= { esaProbeStatsEntry 27 }
esaProbeStatsSumOfSqOnewayP2RDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of one-way delay from source to
destination in the current interval."
::= { esaProbeStatsEntry 28 }
esaProbeStatsMinOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 29 }
esaProbeStatsMaxOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 30 }
esaProbeStatsAvgOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeStatsEntry 31 }
esaProbeStatsSumOnewayR2PDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of one-way delay from destination to source
in the current interval."
::= { esaProbeStatsEntry 32 }
esaProbeStatsSumOfSqOnewayR2PDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of one-way delay from destination to source
in the current interval."
::= { esaProbeStatsEntry 33 }
esaProbeStatsMinPosP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum positive one-way jitter from source to
destination in the current interval."
::= { esaProbeStatsEntry 34 }
esaProbeStatsMaxPosP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum positive one-way jitter from source to
destination in the current interval."
::= { esaProbeStatsEntry 35 }
esaProbeStatsNumPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 36 }
esaProbeStatsSumPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 37 }
esaProbeStatsSumOfSqPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 38 }
esaProbeStatsMinNegP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum negative one-way jitter from source to
destination in the current interval."
::= { esaProbeStatsEntry 39 }
esaProbeStatsMaxNegP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum negative one-way jitter from source to
destination in the current interval."
::= { esaProbeStatsEntry 40 }
esaProbeStatsNumNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 41 }
esaProbeStatsSumNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 42 }
esaProbeStatsSumOfSqNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeStatsEntry 43 }
esaProbeStatsMinPosR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum positive one-way jitter from destination to source
in the current interval."
::= { esaProbeStatsEntry 44 }
esaProbeStatsMaxPosR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum positive one-way jitter from destination to
source in the current interval."
::= { esaProbeStatsEntry 45 }
esaProbeStatsNumPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 46 }
esaProbeStatsSumPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 47 }
esaProbeStatsSumOfSqPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 48 }
esaProbeStatsMinNegR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum negative one-way jitter from destination to source
in the current interval."
::= { esaProbeStatsEntry 49 }
esaProbeStatsMaxNegR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum negative one-way jitter from destination to
source in the current interval."
::= { esaProbeStatsEntry 50 }
esaProbeStatsNumNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 51 }
esaProbeStatsSumNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 52 }
esaProbeStatsSumOfSqNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeStatsEntry 53 }
esaProbeStatsY1731P2RNegLossOccurrences OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts are non-zero then
there could be some kind of provisioning mismatch between the Probe
MEP and Reflector MEP. Here are some scenarios this can happen:
- Probe MEP is configured to count in-profile frames only and the
Reflector MEP is configured to count all frames with a mismatch
in value for the attribute cfmMepLmCountInProfileFrames.
- Probe MEP is configured to count data frames for specific VLAN
priority and the Reflector MEP is configured to count data frames
for all the priorities with a mismatch in values for the attributes
cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios.
NOTE: This could possibly happen due to reasons not related to
configuration such as frame reordering in the network."
::= { esaProbeStatsEntry 54 }
esaProbeStatsY1731R2PNegLossOccurrences OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these counts are non-zero then
there could be some kind of provisioning mismatch between the Probe
MEP and Reflector MEP. Here are some scenarios this can happen:
- Probe MEP is configured to count in-profile frames only and the
Reflector MEP is configured to count all frames with a mismatch
in value for the attribute cfmMepLmCountInProfileFrames.
- Probe MEP is configured to count data frames for specific VLAN
priority and the Reflector MEP is configured to count data frames
for all the priorities with a mismatch in values for the attributes
cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios.
NOTE: This could possibly happen due to reasons not related to
configuration such as frame reordering in the network."
::= { esaProbeStatsEntry 55 }
esaProbeStatsY1731RxLmSamples OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by the user
to differentiate between valid zero frame loss and not receiving
any LMRs."
::= { esaProbeStatsEntry 56 }
esaProbeStatsY1731RxDmSamples OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received)."
::= { esaProbeStatsEntry 57 }
esaProbeStatsY1731P2RFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector). Based
on the configuration the MEP counts the data frames with:
- MEP's LM TX priority or all the priorities
- All the VLAN IDs belonging the MEP's MA VID list."
::= { esaProbeStatsEntry 58 }
esaProbeStatsY1731R2PFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe). Based
on the configuration the MEP counts the data frames with:
- MEP's LM RX priority or all the priorities
- All the VLAN IDs belonging the MEP's MA VID list."
::= { esaProbeStatsEntry 59 }
esaProbeStatsAvgAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
."
::= { esaProbeStatsEntry 60 }
esaProbeStatsAvgAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
."
::= { esaProbeStatsEntry 61 }
esaProbeStatsMinAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
."
::= { esaProbeStatsEntry 62 }
esaProbeStatsMinAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
."
::= { esaProbeStatsEntry 63 }
esaProbeStatsMaxAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
."
::= { esaProbeStatsEntry 64 }
esaProbeStatsMaxAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
."
::= { esaProbeStatsEntry 65 }
esaProbeStatsNumAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters."
::= { esaProbeStatsEntry 66 }
esaProbeStatsNumAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters."
::= { esaProbeStatsEntry 67 }
esaProbeStatsSumAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values."
::= { esaProbeStatsEntry 68 }
esaProbeStatsSumAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values."
::= { esaProbeStatsEntry 69 }
esaProbeStatsSumOfSqAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values."
::= { esaProbeStatsEntry 70 }
esaProbeStatsSumOfSqAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values."
::= { esaProbeStatsEntry 71 }
--
-- ESA Probe Current Statistics Table
--
esaProbeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of ESA Probe related history kept for
a particular ESA Probe entity. These reflect the
current data."
::= { cmServAssuranceObjects 8 }
esaProbeHistoryEntry OBJECT-TYPE
SYNTAX EsaProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the esaProbeHistoryTable. An entry exists
in this table for each ESA Probe."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex,
esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex,
esaProbeHistoryIndex }
::= { esaProbeHistoryTable 1 }
EsaProbeHistoryEntry ::= SEQUENCE {
esaProbeHistoryDestinationIndex Integer32,
esaProbeHistoryCOSIndex Integer32,
esaProbeHistoryIndex Integer32,
esaProbeHistoryTime DateAndTime,
esaProbeHistoryValid TruthValue,
esaProbeHistoryAction CmPmBinAction,
esaProbeHistoryCOS ClassOfServiceType,
esaProbeHistoryP2RPkts PerfCounter64,
esaProbeHistoryP2RErredPkts PerfCounter64,
esaProbeHistoryP2RSyncErrs PerfCounter64,
esaProbeHistoryP2RLostPkts PerfCounter64,
esaProbeHistoryR2PPkts PerfCounter64,
esaProbeHistoryR2PErredPkts PerfCounter64,
esaProbeHistoryR2PSyncErrs PerfCounter64,
esaProbeHistoryR2PLostPkts PerfCounter64,
esaProbeHistoryLostPkts PerfCounter64,
esaProbeHistorySeqGaps PerfCounter64,
esaProbeHistoryOutOfSeqErrs PerfCounter64,
esaProbeHistoryMinRoundTripDelay Unsigned32,
esaProbeHistoryMaxRoundTripDelay Unsigned32,
esaProbeHistoryAvgRoundTripDelay Unsigned32,
esaProbeHistorySumRoundTripDelay PerfCounter64,
esaProbeHistorySumOfSqRoundTripDelay PerfCounter64,
esaProbeHistoryMinOnewayP2RDelay Unsigned32,
esaProbeHistoryMaxOnewayP2RDelay Unsigned32,
esaProbeHistoryAvgOnewayP2RDelay Unsigned32,
esaProbeHistorySumOnewayP2RDelay PerfCounter64,
esaProbeHistorySumOfSqOnewayP2RDelay PerfCounter64,
esaProbeHistoryMinOnewayR2PDelay Unsigned32,
esaProbeHistoryMaxOnewayR2PDelay Unsigned32,
esaProbeHistoryAvgOnewayR2PDelay Unsigned32,
esaProbeHistorySumOnewayR2PDelay PerfCounter64,
esaProbeHistorySumOfSqOnewayR2PDelay PerfCounter64,
esaProbeHistoryMinPosP2RJitter Unsigned32,
esaProbeHistoryMaxPosP2RJitter Unsigned32,
esaProbeHistoryNumPosP2RJitter PerfCounter64,
esaProbeHistorySumPosP2RJitter PerfCounter64,
esaProbeHistorySumOfSqPosP2RJitter PerfCounter64,
esaProbeHistoryMinNegP2RJitter Unsigned32,
esaProbeHistoryMaxNegP2RJitter Unsigned32,
esaProbeHistoryNumNegP2RJitter PerfCounter64,
esaProbeHistorySumNegP2RJitter PerfCounter64,
esaProbeHistorySumOfSqNegP2RJitter PerfCounter64,
esaProbeHistoryMinPosR2PJitter Unsigned32,
esaProbeHistoryMaxPosR2PJitter Unsigned32,
esaProbeHistoryNumPosR2PJitter PerfCounter64,
esaProbeHistorySumPosR2PJitter PerfCounter64,
esaProbeHistorySumOfSqPosR2PJitter PerfCounter64,
esaProbeHistoryMinNegR2PJitter Unsigned32,
esaProbeHistoryMaxNegR2PJitter Unsigned32,
esaProbeHistoryNumNegR2PJitter PerfCounter64,
esaProbeHistorySumNegR2PJitter PerfCounter64,
esaProbeHistorySumOfSqNegR2PJitter PerfCounter64,
esaProbeHistoryY1731P2RNegLossOccurrences PerfCounter64,
esaProbeHistoryY1731R2PNegLossOccurrences PerfCounter64,
esaProbeHistoryY1731RxLmSamples TruthValue,
esaProbeHistoryY1731RxDmSamples TruthValue,
esaProbeHistoryY1731P2RFrames PerfCounter64,
esaProbeHistoryY1731R2PFrames PerfCounter64,
esaProbeHistoryAvgAbsP2RJitter Unsigned32,
esaProbeHistoryAvgAbsR2PJitter Unsigned32,
esaProbeHistoryMaxAbsP2RJitter Unsigned32,
esaProbeHistoryMaxAbsR2PJitter Unsigned32,
esaProbeHistoryMinAbsP2RJitter Unsigned32,
esaProbeHistoryMinAbsR2PJitter Unsigned32,
esaProbeHistoryNumAbsP2RJitter PerfCounter64,
esaProbeHistoryNumAbsR2PJitter PerfCounter64,
esaProbeHistorySumAbsP2RJitter PerfCounter64,
esaProbeHistorySumAbsR2PJitter PerfCounter64,
esaProbeHistorySumOfSqAbsP2RJitter PerfCounter64,
esaProbeHistorySumOfSqAbsR2PJitter PerfCounter64
}
esaProbeHistoryDestinationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported."
::= { esaProbeHistoryEntry 1 }
esaProbeHistoryCOSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters."
::= { esaProbeHistoryEntry 2 }
esaProbeHistoryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this ESA Probe statistics history entry."
::= { esaProbeHistoryEntry 3 }
esaProbeHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { esaProbeHistoryEntry 4 }
esaProbeHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { esaProbeHistoryEntry 5 }
esaProbeHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { esaProbeHistoryEntry 6 }
esaProbeHistoryCOS OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported."
::= { esaProbeHistoryEntry 7 }
esaProbeHistoryP2RPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeHistoryR2PPkts."
::= { esaProbeHistoryEntry 8 }
esaProbeHistoryP2RErredPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to resource
limitations (buffers).
This can happen if the Probe Configuration was changed to
send in a large number of packets in a time interval.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeHistoryEntry 9 }
esaProbeHistoryP2RSyncErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of (time) Synchronization Errors from probe to reflector
in the current interval."
::= { esaProbeHistoryEntry 10 }
esaProbeHistoryP2RLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost."
::= { esaProbeHistoryEntry 11 }
esaProbeHistoryR2PPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeHistoryP2RPkts."
::= { esaProbeHistoryEntry 12 }
esaProbeHistoryR2PErredPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after it was
marked as lost (i.e.beyond timeout).
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeHistoryEntry 13 }
esaProbeHistoryR2PSyncErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of (time) Synchronization Errors from reflector to probe
in the current interval."
::= { esaProbeHistoryEntry 14 }
esaProbeHistoryR2PLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost."
::= { esaProbeHistoryEntry 15 }
esaProbeHistoryLostPkts OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeHistoryEntry 16 }
esaProbeHistorySeqGaps OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is termed as a sequence gap.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeHistoryEntry 17 }
esaProbeHistoryOutOfSeqErrs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is termed as out of sequence error.
NOTE: This is not applicable for Y.1731 probes."
::= { esaProbeHistoryEntry 18 }
esaProbeHistoryMinRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeHistoryEntry 19 }
esaProbeHistoryMaxRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeHistoryEntry 20 }
esaProbeHistoryAvgRoundTripDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeHistoryEntry 21 }
esaProbeHistorySumRoundTripDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value."
::= { esaProbeHistoryEntry 22 }
esaProbeHistorySumOfSqRoundTripDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of round trip delays in the current interval."
::= { esaProbeHistoryEntry 23 }
esaProbeHistoryMinOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 24 }
esaProbeHistoryMaxOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 25 }
esaProbeHistoryAvgOnewayP2RDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one-way source to destination delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 26 }
esaProbeHistorySumOnewayP2RDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of one-way delay from source to
destination in the current interval."
::= { esaProbeHistoryEntry 27 }
esaProbeHistorySumOfSqOnewayP2RDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of one-way delay from source to
destination in the current interval."
::= { esaProbeHistoryEntry 28 }
esaProbeHistoryMinOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 29 }
esaProbeHistoryMaxOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 30 }
esaProbeHistoryAvgOnewayR2PDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one-way destination to source delay(in microseconds)
across all packets received in the current interval."
::= { esaProbeHistoryEntry 31 }
esaProbeHistorySumOnewayR2PDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of one-way delay from destination to source
in the current interval."
::= { esaProbeHistoryEntry 32 }
esaProbeHistorySumOfSqOnewayR2PDelay OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of one-way delay from destination to source
in the current interval."
::= { esaProbeHistoryEntry 33 }
esaProbeHistoryMinPosP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum positive one-way jitter from source to
destination in the current interval."
::= { esaProbeHistoryEntry 34 }
esaProbeHistoryMaxPosP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum positive one-way jitter from source to
destination in the current interval."
::= { esaProbeHistoryEntry 35 }
esaProbeHistoryNumPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 36 }
esaProbeHistorySumPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 37 }
esaProbeHistorySumOfSqPosP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of positive one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 38 }
esaProbeHistoryMinNegP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum negative one-way jitter from source to
destination in the current interval."
::= { esaProbeHistoryEntry 39 }
esaProbeHistoryMaxNegP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum negative one-way jitter from source to
destination in the current interval."
::= { esaProbeHistoryEntry 40 }
esaProbeHistoryNumNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 41 }
esaProbeHistorySumNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 42 }
esaProbeHistorySumOfSqNegP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of negative one-way jitters from source to
destination in the current interval."
::= { esaProbeHistoryEntry 43 }
esaProbeHistoryMinPosR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum positive one-way jitter from destination to source
in the current interval."
::= { esaProbeHistoryEntry 44 }
esaProbeHistoryMaxPosR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum positive one-way jitter from destination to
source in the current interval."
::= { esaProbeHistoryEntry 45 }
esaProbeHistoryNumPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 46 }
esaProbeHistorySumPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 47 }
esaProbeHistorySumOfSqPosR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of positive one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 48 }
esaProbeHistoryMinNegR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum negative one-way jitter from destination to source
in the current interval."
::= { esaProbeHistoryEntry 49 }
esaProbeHistoryMaxNegR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum negative one-way jitter from destination to
source in the current interval."
::= { esaProbeHistoryEntry 50 }
esaProbeHistoryNumNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 51 }
esaProbeHistorySumNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total sum of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 52 }
esaProbeHistorySumOfSqNegR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of negative one-way jitters from destination to
source in the current interval."
::= { esaProbeHistoryEntry 53 }
esaProbeHistoryY1731P2RNegLossOccurrences OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts are non-zero then
there could be some kind of provisioning mismatch between the Probe
MEP and Reflector MEP. Here are some scenarios this can happen:
- Probe MEP is configured to count in-profile frames only and the
Reflector MEP is configured to count all frames with a mismatch
in value for the attribute cfmMepLmCountInProfileFrames.
- Probe MEP is configured to count data frames for specific VLAN
priority and the Reflector MEP is configured to count data frames
for all the priorities with a mismatch in values for the attributes
cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios.
NOTE: This could possibly happen due to reasons not related to
configuration such as frame reordering in the network."
::= { esaProbeHistoryEntry 54 }
esaProbeHistoryY1731R2PNegLossOccurrences OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these counts are non-zero then
there could be some kind of provisioning mismatch between the Probe
MEP and Reflector MEP. Here are some scenarios this can happen:
- Probe MEP is configured to count in-profile frames only and the
Reflector MEP is configured to count all frames with a mismatch
in value for the attribute cfmMepLmCountInProfileFrames.
- Probe MEP is configured to count data frames for specific VLAN
priority and the Reflector MEP is configured to count data frames
for all the priorities with a mismatch in values for the attributes
cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios.
NOTE: This could possibly happen due to reasons not related to
configuration such as frame reordering in the network."
::= { esaProbeHistoryEntry 55 }
esaProbeHistoryY1731RxLmSamples OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by the user
to differentiate between valid zero frame loss and not receiving
any LMRs."
::= { esaProbeHistoryEntry 56 }
esaProbeHistoryY1731RxDmSamples OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received)."
::= { esaProbeHistoryEntry 57 }
esaProbeHistoryY1731P2RFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector). Based
on the configuration the MEP counts the data frames with:
- MEP's LM TX priority or all the priorities
- All the VLAN IDs belonging the MEP's MA VID list."
::= { esaProbeHistoryEntry 58 }
esaProbeHistoryY1731R2PFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe). Based
on the configuration the MEP counts the data frames with:
- MEP's LM RX priority or all the priorities
- All the VLAN IDs belonging the MEP's MA VID list."
::= { esaProbeHistoryEntry 59 }
esaProbeHistoryAvgAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
."
::= { esaProbeHistoryEntry 60 }
esaProbeHistoryAvgAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
."
::= { esaProbeHistoryEntry 61 }
esaProbeHistoryMinAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
."
::= { esaProbeHistoryEntry 62 }
esaProbeHistoryMinAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
."
::= { esaProbeHistoryEntry 63 }
esaProbeHistoryMaxAbsP2RJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
."
::= { esaProbeHistoryEntry 64 }
esaProbeHistoryMaxAbsR2PJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
."
::= { esaProbeHistoryEntry 65 }
esaProbeHistoryNumAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters."
::= { esaProbeHistoryEntry 66 }
esaProbeHistoryNumAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters."
::= { esaProbeHistoryEntry 67 }
esaProbeHistorySumAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values."
::= { esaProbeHistoryEntry 68 }
esaProbeHistorySumAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values."
::= { esaProbeHistoryEntry 69 }
esaProbeHistorySumOfSqAbsP2RJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values."
::= { esaProbeHistoryEntry 70 }
esaProbeHistorySumOfSqAbsR2PJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values."
::= { esaProbeHistoryEntry 71 }
--
-- ESA Probe Statistics Distribution Config Table
--
esaProbeDistStatsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeDistStatsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that need to be configured
in order to obtain statistical distribution
of ESA Probe collected data."
::= { cmServAssuranceObjects 9 }
esaProbeDistStatsConfigEntry OBJECT-TYPE
SYNTAX EsaProbeDistStatsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeDistStatsConfigTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex }
::= { esaProbeDistStatsConfigTable 1 }
EsaProbeDistStatsConfigEntry ::= SEQUENCE {
esaProbeDistStatsConfigIndex Integer32,
esaProbeDistStatsConfigType EsaProbeDistStatsType,
esaProbeDistStatsConfigMinVal Integer32,
esaProbeDistStatsConfigMaxVal Integer32,
esaProbeDistStatsConfigNumBins Unsigned32,
esaProbeDistStatsConfigLowBoundOfBin1 Integer32,
esaProbeDistStatsConfigLowBoundOfBin2 Integer32,
esaProbeDistStatsConfigLowBoundOfBin3 Integer32,
esaProbeDistStatsConfigLowBoundOfBin4 Integer32,
esaProbeDistStatsConfigLowBoundOfBin5 Integer32,
esaProbeDistStatsConfigLowBoundOfBin6 Integer32,
esaProbeDistStatsConfigLowBoundOfBin7 Integer32,
esaProbeDistStatsConfigLowBoundOfBin8 Integer32,
esaProbeDistStatsConfigLowBoundOfBin9 Integer32
}
esaProbeDistStatsConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..11)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique index for each row. Each row corresponds to each enumeration
type specified in EsaProbeDistStatsType."
::= { esaProbeDistStatsConfigEntry 1 }
esaProbeDistStatsConfigType OBJECT-TYPE
SYNTAX EsaProbeDistStatsType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the statistical distribution
is for round-trip delay (rt-delay), one-way probe to reflector
delay (oneway-p2rdelay), one-way reflector to probe delay(oneway-r2pdelay),
probe to reflector jitter (oneway-p2rjitter) or
one-way reflector to probe jitter (oneway-r2pjitter)."
::= { esaProbeDistStatsConfigEntry 2 }
esaProbeDistStatsConfigMinVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum sample value in distribution."
::= { esaProbeDistStatsConfigEntry 3 }
esaProbeDistStatsConfigMaxVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum sample value in distribution."
::= { esaProbeDistStatsConfigEntry 4 }
esaProbeDistStatsConfigNumBins OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of distribution bins."
::= { esaProbeDistStatsConfigEntry 5 }
esaProbeDistStatsConfigLowBoundOfBin1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 1st bin."
::= { esaProbeDistStatsConfigEntry 6 }
esaProbeDistStatsConfigLowBoundOfBin2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 2nd bin."
::= { esaProbeDistStatsConfigEntry 7 }
esaProbeDistStatsConfigLowBoundOfBin3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 3rd bin."
::= { esaProbeDistStatsConfigEntry 8 }
esaProbeDistStatsConfigLowBoundOfBin4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 4th bin."
::= { esaProbeDistStatsConfigEntry 9 }
esaProbeDistStatsConfigLowBoundOfBin5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 5th bin."
::= { esaProbeDistStatsConfigEntry 10 }
esaProbeDistStatsConfigLowBoundOfBin6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 6th bin."
::= { esaProbeDistStatsConfigEntry 11 }
esaProbeDistStatsConfigLowBoundOfBin7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 7th bin."
::= { esaProbeDistStatsConfigEntry 12 }
esaProbeDistStatsConfigLowBoundOfBin8 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 8th bin."
::= { esaProbeDistStatsConfigEntry 13 }
esaProbeDistStatsConfigLowBoundOfBin9 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound of the 9th bin."
::= { esaProbeDistStatsConfigEntry 14 }
--
-- ESA Probe Statistics Current Distribution Results Table
--
esaProbeDistStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeDistStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that provide statistical distribution
of ESA Probe collected data."
::= { cmServAssuranceObjects 10 }
esaProbeDistStatsEntry OBJECT-TYPE
SYNTAX EsaProbeDistStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeDistStatsTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex,
esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex }
::= { esaProbeDistStatsTable 1 }
EsaProbeDistStatsEntry ::= SEQUENCE {
esaProbeDistStatsDestinationIndex Integer32,
esaProbeDistStatsCOSIndex Integer32,
esaProbeDistStatsAction CmPmBinAction,
esaProbeDistStatsCOS ClassOfServiceType,
esaProbeDistStatsNumBins Integer32,
esaProbeDistStatsLTMin PerfCounter64,
esaProbeDistStatsGTMax PerfCounter64
}
esaProbeDistStatsDestinationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported."
::= { esaProbeDistStatsEntry 1 }
esaProbeDistStatsCOSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters."
::= { esaProbeDistStatsEntry 2 }
esaProbeDistStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { esaProbeDistStatsEntry 3 }
esaProbeDistStatsCOS OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported."
::= { esaProbeDistStatsEntry 4 }
esaProbeDistStatsNumBins OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bins over which the statistical
data is distributed."
::= { esaProbeDistStatsEntry 5 }
esaProbeDistStatsLTMin OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which are
less than the minimum value specified."
::= { esaProbeDistStatsEntry 6 }
esaProbeDistStatsGTMax OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which are
greater than the maximum value specified."
::= { esaProbeDistStatsEntry 7 }
--
-- ESA Probe Statistics Current Distribution Results BIN Table
--
esaProbeDistStatsBinTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeDistStatsBinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that provide statistical distribution
of ESA Probe collected data for specific BINs."
::= { cmServAssuranceObjects 11 }
esaProbeDistStatsBinEntry OBJECT-TYPE
SYNTAX EsaProbeDistStatsBinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeDistStatsBinTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex,
esaProbeDistStatsConfigIndex,
esaProbeDistStatsDestinationIndex,
esaProbeDistStatsCOSIndex,
esaProbeDistStatsBinIndex }
::= { esaProbeDistStatsBinTable 1 }
EsaProbeDistStatsBinEntry ::= SEQUENCE {
esaProbeDistStatsBinIndex Integer32,
esaProbeDistStatsBinLower Integer32,
esaProbeDistStatsBinUpper Integer32,
esaProbeDistStatsBinNumSamples PerfCounter64
}
esaProbeDistStatsBinIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index for each row that uniquely provides statistical
data for a range."
::= { esaProbeDistStatsBinEntry 1 }
esaProbeDistStatsBinLower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower limit of values collected in this bin."
::= { esaProbeDistStatsBinEntry 2 }
esaProbeDistStatsBinUpper OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper limit of values collected in this bin."
::= { esaProbeDistStatsBinEntry 3 }
esaProbeDistStatsBinNumSamples OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which fall between
the lower and upper limits."
::= { esaProbeDistStatsBinEntry 4 }
--
-- ESA Probe Statistics History Distribution Results Table
--
esaProbeDistHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeDistHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that provide statistical distribution
history of ESA Probe collected data."
::= { cmServAssuranceObjects 12 }
esaProbeDistHistoryEntry OBJECT-TYPE
SYNTAX EsaProbeDistHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeDistHistoryTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex,
esaProbeDistStatsConfigIndex,
esaProbeDistHistoryDestinationIndex,
esaProbeDistHistoryCOSIndex,
esaProbeDistHistoryIndex }
::= { esaProbeDistHistoryTable 1 }
EsaProbeDistHistoryEntry ::= SEQUENCE {
esaProbeDistHistoryDestinationIndex Integer32,
esaProbeDistHistoryCOSIndex Integer32,
esaProbeDistHistoryIndex Integer32,
esaProbeDistHistoryTime DateAndTime,
esaProbeDistHistoryAction CmPmBinAction,
esaProbeDistHistoryCOS ClassOfServiceType,
esaProbeDistHistoryNumBins Integer32,
esaProbeDistHistoryLTMin PerfCounter64,
esaProbeDistHistoryGTMax PerfCounter64
}
esaProbeDistHistoryDestinationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported."
::= { esaProbeDistHistoryEntry 1 }
esaProbeDistHistoryCOSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters."
::= { esaProbeDistHistoryEntry 2 }
esaProbeDistHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this ESA Probe Distribution History entry."
::= { esaProbeDistHistoryEntry 3 }
esaProbeDistHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { esaProbeDistHistoryEntry 4 }
esaProbeDistHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { esaProbeDistHistoryEntry 5 }
esaProbeDistHistoryCOS OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported."
::= { esaProbeDistHistoryEntry 6 }
esaProbeDistHistoryNumBins OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bins over which the statistical
data is distributed."
::= { esaProbeDistHistoryEntry 7 }
esaProbeDistHistoryLTMin OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which are
less than the minimum value specified."
::= { esaProbeDistHistoryEntry 8 }
esaProbeDistHistoryGTMax OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which are
greater than the maximum value specified."
::= { esaProbeDistHistoryEntry 9 }
--
-- ESA Probe Statistics History Distribution Results BIN Table
--
esaProbeDistHistoryBinTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeDistHistoryBinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries that provide historical statistical distribution
of ESA Probe collected data for specific BINs."
::= { cmServAssuranceObjects 13 }
esaProbeDistHistoryBinEntry OBJECT-TYPE
SYNTAX EsaProbeDistHistoryBinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeDistHistoryBinTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex,
esaProbeDistHistoryDestinationIndex,
esaProbeDistHistoryCOSIndex,
esaProbeDistHistoryIndex, esaProbeDistHistoryBinIndex }
::= { esaProbeDistHistoryBinTable 1 }
EsaProbeDistHistoryBinEntry ::= SEQUENCE {
esaProbeDistHistoryBinIndex Integer32,
esaProbeDistHistoryBinLower Integer32,
esaProbeDistHistoryBinUpper Integer32,
esaProbeDistHistoryBinNumSamples PerfCounter64
}
esaProbeDistHistoryBinIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index for each row that uniquely provides statistical
data for a range."
::= { esaProbeDistHistoryBinEntry 1 }
esaProbeDistHistoryBinLower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower limit of values collected in this bin."
::= { esaProbeDistHistoryBinEntry 2 }
esaProbeDistHistoryBinUpper OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper limit of values collected in this bin."
::= { esaProbeDistHistoryBinEntry 3 }
esaProbeDistHistoryBinNumSamples OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sample data points which fall between
the lower and upper limits."
::= { esaProbeDistHistoryBinEntry 4 }
---ESA Probe Threshold Table
esaProbeStatsThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeStatsThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of ESA
Probe Thresholds."
::= { cmServAssuranceObjects 14 }
esaProbeStatsThresholdEntry OBJECT-TYPE
SYNTAX EsaProbeStatsThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the esaProbeStatsThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeStatsThresholdIndex }
::= { esaProbeStatsThresholdTable 1 }
EsaProbeStatsThresholdEntry ::= SEQUENCE {
esaProbeStatsThresholdIndex Integer32,
esaProbeStatsThresholdVariable VariablePointer,
esaProbeStatsThresholdAbsValueLo Unsigned32,
esaProbeStatsThresholdAbsValueHi Unsigned32,
esaProbeStatsThresholdMonValue PerfCounter64
}
esaProbeStatsThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
esaProbeStatsThresholdTable."
::= { esaProbeStatsThresholdEntry 1 }
esaProbeStatsThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled. Objects of the esaProbeStatsTable table are
monitored. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, PerfCounter64,
Gauge, or TimeTicks) may be sampled."
::= { esaProbeStatsThresholdEntry 2 }
esaProbeStatsThresholdAbsValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the absolute value of the threshold."
::= { esaProbeStatsThresholdEntry 3 }
esaProbeStatsThresholdAbsValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the absolute value of the threshold."
::= { esaProbeStatsThresholdEntry 4 }
esaProbeStatsThresholdMonValue OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to esaProbeStatsThresholdVariable."
::= { esaProbeStatsThresholdEntry 5 }
--
-- ESA Probe COS Configuration Table
--
esaProbeCOSConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeCOSConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to ESA Probes COS Configuration Levels."
::= { cmServAssuranceObjects 15 }
esaProbeCOSConfigEntry OBJECT-TYPE
SYNTAX EsaProbeCOSConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeCOSConfigTable. Entries can
be created in this table by management application action."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeCOSConfigIndex }
::= { esaProbeCOSConfigTable 1 }
EsaProbeCOSConfigEntry ::= SEQUENCE {
-- identification
esaProbeCOSConfigIndex Integer32,
esaProbeCOSConfigType ClassOfServiceType,
esaProbeCOSConfigInterval EsaProbePktIntervalType,
esaProbeCOSConfigPktSize Integer32,
esaProbeCOSConfigStorageType StorageType,
esaProbeCOSConfigRowStatus RowStatus,
esaProbeCOSConfigslmInterval EsaProbePktIntervalType,
esaProbeCOSConfigslmPktSize Integer32,
esaProbeCOSConfigSoamPmExtAvailFlrThreshold Unsigned32,
esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus Unsigned32,
esaProbeCOSConfigSoamPmExtConDeltaTsForAvail Unsigned32
}
esaProbeCOSConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
SLA (Service Level Agreement) for a specific Class of Service.
Index 1 is associated with cos-0, index 2 with cos-1, index 3 with cos-2 and so on."
::= { esaProbeCOSConfigEntry 1 }
esaProbeCOSConfigType OBJECT-TYPE
SYNTAX ClassOfServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Class of Service Type for Y.1731/SLM-SLR Probes, associated with the row."
::= { esaProbeCOSConfigEntry 2 }
esaProbeCOSConfigInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Class of Service Y.1731/SLM-SLR packet interval type."
::= { esaProbeCOSConfigEntry 3 }
esaProbeCOSConfigPktSize OBJECT-TYPE
SYNTAX Integer32 (64..9612)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Class of Service Y.1731/SLM-SLR Packet Size.
This object enables specification of the TLV size for
Delay Measurement Measures(DMMs) as well as Synthetic Loss Measurement Frames (SLMs)."
::= { esaProbeCOSConfigEntry 4 }
esaProbeCOSConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { esaProbeCOSConfigEntry 5 }
esaProbeCOSConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of esaProbeCOSConfigRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
esaProbeCOSConfigRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The esaProbeCOSConfigRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { esaProbeCOSConfigEntry 6 }
esaProbeCOSConfigslmInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of the interval between subsequent SLM packets."
::= { esaProbeCOSConfigEntry 7 }
esaProbeCOSConfigslmPktSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of the SLM Packet Size."
::= { esaProbeCOSConfigEntry 8 }
esaProbeCOSConfigSoamPmExtAvailFlrThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frame loss ratio threshold for Availability (m%)."
::= { esaProbeCOSConfigEntry 9 }
esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of loss measurement PDUs.
delta_t is this attribute multiplied by the
loss measurement message period.
For example, if SLM message period is
100ms and this attribute is 10,
then the delta_t is 1second."
::= { esaProbeCOSConfigEntry 10 }
esaProbeCOSConfigSoamPmExtConDeltaTsForAvail OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of consecutive delta_ts used
in the computation of availability/unavailability (n)."
::= { esaProbeCOSConfigEntry 11 }
--
-- ESA Probe Destination Configuration Table
--
esaProbeMultiDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsaProbeMultiDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to ESA Probes Multi Destinations."
::= { cmServAssuranceObjects 16 }
esaProbeMultiDestinationEntry OBJECT-TYPE
SYNTAX EsaProbeMultiDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeMultiDestinationTable. Entries can
be created in this table by management application action. Entries in this table
represent destinations in a point-to-multipoint ESA Probe."
INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDestinationIndex }
::= { esaProbeMultiDestinationTable 1 }
EsaProbeMultiDestinationEntry ::= SEQUENCE {
-- identification
esaProbeDestinationIndex Integer32,
esaProbeDestinationMepType MepDestinationType,
esaProbeDestinationMepMacAddr MacAddress,
esaProbeDestinationMepId Dot1agCfmMepIdOrZero,
esaProbeDestinationStorageType StorageType,
esaProbeDestinationRowStatus RowStatus
}
esaProbeDestinationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
a destination."
::= { esaProbeMultiDestinationEntry 1 }
esaProbeDestinationMepType OBJECT-TYPE
SYNTAX MepDestinationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for point-to-multipoint probes.
This indicates if the destination MEP is specified using the MEP ID object
esaProbeDestinationMepId."
::= { esaProbeMultiDestinationEntry 2 }
esaProbeDestinationMepMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for point-to-multipoint probes.
It identifies the destination MEP. This MAC address will be the
destination MAC address for frames if esaProbeDestinationMepType is 'macaddress'.
If CC protocol is not enabled between source and destination MEP then this is the
only choice to identify the remote MEP."
::= { esaProbeMultiDestinationEntry 3 }
esaProbeDestinationMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is applicable only for point-to-multipoint probes.
It identifies the destination MEP. The MAC
address of this RMEP ID from RMEP database will be the destination
MAC address. This value is used only if the
esaProbeDestinationMepType is 'mepid'. CC protocol must be
enabled between source and destination MEP if the RMEP ID
is used to identify the Remote MEP."
::= { esaProbeMultiDestinationEntry 4 }
esaProbeDestinationStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { esaProbeMultiDestinationEntry 5 }
esaProbeDestinationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of esaProbeDestinationRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
esaProbeDestinationRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The esaProbeDestinationRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { esaProbeMultiDestinationEntry 6 }
--
-- BERT Control Table
--
bertControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BertControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of BERT Streams."
::= { cmServAssuranceObjects 17 }
bertControlEntry OBJECT-TYPE
SYNTAX BertControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the bertControlTable."
INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex }
::= { bertControlTable 1 }
BertControlEntry ::= SEQUENCE {
bertControlIndex Integer32,
bertControlSourceEntity VariablePointer,
bertControlTestMode BerTestMode,
bertControlDuration Integer32,
bertControlStream Integer32,
bertControlAction BertControlAction,
bertControlTestStatus BerTestStatus
}
bertControlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this BERT Control."
::= { bertControlEntry 1 }
bertControlSourceEntity OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pointer to the entity on which the BERT
will be started within a card."
::= { bertControlEntry 2 }
bertControlTestMode OBJECT-TYPE
SYNTAX BerTestMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of BERT to be performed."
::= { bertControlEntry 3 }
bertControlDuration OBJECT-TYPE
SYNTAX Integer32 (0..259200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables specification of the time in seconds
for BERT. BERT will be stopped
after the specified time interval is exhausted."
::= { bertControlEntry 4 }
bertControlStream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which stream should be included in the
BERT execution. Value of 0 indicates that no streams is selected
by bertControlStream. Non 0 value indicates the
selected BERT stream."
::= { bertControlEntry 5 }
bertControlAction OBJECT-TYPE
SYNTAX BertControlAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables starting/stopping of traffic generation
as well as resetting of monitored streams. This object may
not be specified at configuration creation time - in this
case it will take the value of `none'. This allows manager
to explicitly control the start and stop of traffic
generation/monitoring activity.
Value of `stop' is invalid if the activity is specified but
not started. Value of `start' is valid during creation time,
as well as when activity is already stopped. Specification
of `reset' resets the specified streams to default values,
as well as clears the control specification. Get on this
variable gives the most recent SNMP set specification."
::= { bertControlEntry 6 }
bertControlTestStatus OBJECT-TYPE
SYNTAX BerTestStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current status of test set configuration
entry. Upon creation, the status has a value of `initial'; the
status changes to `in-progress' upon ecpaControlAction
indicating `start'; the status changes to `completed' upon
ecpaControlAction indicating stop, as well as when
the specified test generation completes
autonomously upon completion of number of frames or
completion of specified time interval."
::= { bertControlEntry 7 }
--
-- BERT Config Stream Table
--
bertConfigStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF BertConfigStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the configuration of BERT Config Stream Specifications."
::= { cmServAssuranceObjects 18 }
bertConfigStreamEntry OBJECT-TYPE
SYNTAX BertConfigStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the bertConfigStreamTable."
INDEX { bertConfigStreamIndex }
::= { bertConfigStreamTable 1 }
BertConfigStreamEntry ::= SEQUENCE {
bertConfigStreamIndex Integer32,
bertConfigStreamName DisplayString,
bertConfigStreamTxPattern BertPattern,
bertConfigStreamErrInjectEnabled TruthValue,
bertConfigStreamErrInjectRate BitErrRate,
bertConfigStreamErrInjectRateMultiplier Integer32,
bertConfigStreamUserPatternLength BertUserPatternLength,
bertConfigStreamUserPattern DisplayString
}
bertConfigStreamIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index value used to uniquely identify
this BERT configStream."
::= { bertConfigStreamEntry 1 }
bertConfigStreamName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Symbolic Stream Name that can be associated with an BERT Config stream."
::= { bertConfigStreamEntry 2 }
bertConfigStreamTxPattern OBJECT-TYPE
SYNTAX BertPattern
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows specification of the Tx pattern of this BERT Config stream."
::= { bertConfigStreamEntry 3 }
bertConfigStreamErrInjectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows specification of whether Bit Error be injected."
::= { bertConfigStreamEntry 4 }
bertConfigStreamErrInjectRate OBJECT-TYPE
SYNTAX BitErrRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit Error Rate, applicable when Error Injection is enabled."
::= { bertConfigStreamEntry 5 }
bertConfigStreamErrInjectRateMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BER value with 0.1 Step, in this release is fixed 10,
only applicable when Error Injection is enabled."
::= { bertConfigStreamEntry 6 }
bertConfigStreamUserPatternLength OBJECT-TYPE
SYNTAX BertUserPatternLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User defined testing pattern length."
::= { bertConfigStreamEntry 7 }
bertConfigStreamUserPattern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User defined testing pattern in a HEX format display string,
applicable when test pattern is user defined."
::= { bertConfigStreamEntry 8 }
--- BERT Test Streams Table
bertTestStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF BertTestStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing results of a previous test."
::= { cmServAssuranceObjects 19 }
bertTestStreamEntry OBJECT-TYPE
SYNTAX BertTestStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the bertTestStreamTable. Entries in this
table show results of the current BERT."
INDEX { neIndex, shelfIndex, slotIndex, bertControlIndex,
bertTestStreamIndex }
::= { bertTestStreamTable 1 }
BertTestStreamEntry ::= SEQUENCE {
bertTestStreamIndex Integer32,
bertTestStreamName DisplayString,
bertTestStreamTxPattern BertPattern,
bertTestStreamErrInjectEnabled TruthValue,
bertTestStreamErrInjectRate BitErrRate,
bertTestStreamErrInjectRateMultiplier Integer32,
bertTestStreamUserPatternLength BertUserPatternLength,
bertTestStreamUserPattern DisplayString,
bertTestStreamMonStartTime DateAndTime,
bertTestStreamMonEndTime DateAndTime,
bertTestStreamMonElapsedTime Integer32,
bertTestStreamMonSyncState BertSyncState,
bertTestStreamMonRxPattern BertPattern,
bertTestStreamMonSyncCounts Unsigned32,
bertTestStreamMonRxBitErrsSinceStart PerfCounter64,
bertTestStreamMonRxBitsSinceStart PerfCounter64,
bertTestStreamMonRxESsSinceStart Unsigned32,
bertTestStreamMonRxErrRateSinceStart BitErrRate,
bertTestStreamMonRxErrRateMultiplierSinceStart Integer32,
bertTestStreamMonRxBitErrsSinceLastSync PerfCounter64,
bertTestStreamMonRxBitsSinceLastSync PerfCounter64,
bertTestStreamMonRxESsSinceLastSync Unsigned32,
bertTestStreamMonRxErrRateSinceLastSync BitErrRate,
bertTestStreamMonRxErrRateMultiplierSinceLastSync Unsigned32,
bertTestStreamConfigChangedFlag TruthValue,
bertTestStreamMonOOSSsSinceStart Unsigned32
}
bertTestStreamIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index value corresponding to the stream index
for which the BERT was initiated."
::= { bertTestStreamEntry 1 }
bertTestStreamName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Symbolic Stream Name that can be associated with an BERT stream."
::= { bertTestStreamEntry 2 }
bertTestStreamTxPattern OBJECT-TYPE
SYNTAX BertPattern
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Tx pattern of this BERT Test stream."
::= { bertTestStreamEntry 3 }
bertTestStreamErrInjectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object allows specification of whether Bit Error be injected."
::= { bertTestStreamEntry 4 }
bertTestStreamErrInjectRate OBJECT-TYPE
SYNTAX BitErrRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit Error Rate, applicable when Error Injection is enabled."
::= { bertTestStreamEntry 5 }
bertTestStreamErrInjectRateMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BER value with 0.1 Step, in this release is fixed 10,
only applicable when Error Injection is enabled."
::= { bertTestStreamEntry 6 }
bertTestStreamUserPatternLength OBJECT-TYPE
SYNTAX BertUserPatternLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User defined testing pattern length."
::= { bertTestStreamEntry 7 }
bertTestStreamUserPattern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User defined testing pattern in a HEX format display string,
applicable when test pattern is user defined."
::= { bertTestStreamEntry 8 }
bertTestStreamMonStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the BERT for this stream."
::= { bertTestStreamEntry 9 }
bertTestStreamMonEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The end time of the BERT for this stream."
::= { bertTestStreamEntry 10 }
bertTestStreamMonElapsedTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of BERT for this stream in seconds."
::= { bertTestStreamEntry 11 }
bertTestStreamMonSyncState OBJECT-TYPE
SYNTAX BertSyncState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sync State of the BERT."
::= { bertTestStreamEntry 12 }
bertTestStreamMonRxPattern OBJECT-TYPE
SYNTAX BertPattern
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Rx pattern of this BERT Test stream."
::= { bertTestStreamEntry 13 }
bertTestStreamMonSyncCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Sync counts from test start."
::= { bertTestStreamEntry 14 }
bertTestStreamMonRxBitErrsSinceStart OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received Errors since test start."
::= { bertTestStreamEntry 15 }
bertTestStreamMonRxBitsSinceStart OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received Bits since test start."
::= { bertTestStreamEntry 16 }
bertTestStreamMonRxESsSinceStart OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Error seconds since test start."
::= { bertTestStreamEntry 17 }
bertTestStreamMonRxErrRateSinceStart OBJECT-TYPE
SYNTAX BitErrRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received BER Unit since test start."
::= { bertTestStreamEntry 18 }
bertTestStreamMonRxErrRateMultiplierSinceStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received BER value with 0.1 Step since test start."
::= { bertTestStreamEntry 19 }
bertTestStreamMonRxBitErrsSinceLastSync OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received Errors since last sync."
::= { bertTestStreamEntry 20 }
bertTestStreamMonRxBitsSinceLastSync OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received Bits since last sync."
::= { bertTestStreamEntry 21 }
bertTestStreamMonRxESsSinceLastSync OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received Error seconds since last sync."
::= { bertTestStreamEntry 22 }
bertTestStreamMonRxErrRateSinceLastSync OBJECT-TYPE
SYNTAX BitErrRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received BER Unit since last sync."
::= { bertTestStreamEntry 23 }
bertTestStreamMonRxErrRateMultiplierSinceLastSync OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows specification of the Received BER value with 0.1 Step since last sync."
::= { bertTestStreamEntry 24 }
bertTestStreamConfigChangedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides information on whether the associated bertConfigStream is changed."
::= { bertTestStreamEntry 25 }
bertTestStreamMonOOSSsSinceStart OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means the Out of Sync Seconds since start."
::= { bertTestStreamEntry 26 }
--
-- Esa Probe Cos Configuration Soam Pm Ext Table
--
f3EsaProbeCOSConfigSoamPmExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3EsaProbeCOSConfigSoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to ESA Probe Cos Configurations MEF 35."
::= { cmServAssuranceObjects 20 }
f3EsaProbeCOSConfigSoamPmExtEntry OBJECT-TYPE
SYNTAX F3EsaProbeCOSConfigSoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the esaProbeCOSConfigTable MEF 35. Entries can
be created in this table by management application action."
AUGMENTS { esaProbeCOSConfigEntry }
::= { f3EsaProbeCOSConfigSoamPmExtTable 1 }
F3EsaProbeCOSConfigSoamPmExtEntry ::= SEQUENCE {
f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold Unsigned32,
f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus Unsigned32,
f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail Unsigned32
}
f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frame loss ratio threshold for Availability (m%)."
::= { f3EsaProbeCOSConfigSoamPmExtEntry 1 }
f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of loss measurement PDUs.
delta_t is this attribute multiplied by the
loss measurement message period.
For example, if SLM message period is
100ms and this attribute is 10,
then the delta_t is 1second."
::= { f3EsaProbeCOSConfigSoamPmExtEntry 2 }
f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of consecutive delta_ts used
in the computation of availability/unavailability (n)."
::= { f3EsaProbeCOSConfigSoamPmExtEntry 3 }
--
-- Esa Probe Stats Soam Pm Ext Table
--
f3EsaProbeStatsSoamPmExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3EsaProbeStatsSoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of ESA Probe MEF 35 related statistics kept for
a particular ESA Probe entity. These reflect the
current data."
::= { cmServAssuranceObjects 21 }
f3EsaProbeStatsSoamPmExtEntry OBJECT-TYPE
SYNTAX F3EsaProbeStatsSoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3EsaProbeStatsSoamPmExtTable."
AUGMENTS { esaProbeStatsEntry }
::= { f3EsaProbeStatsSoamPmExtTable 1 }
F3EsaProbeStatsSoamPmExtEntry ::= SEQUENCE {
f3EsaProbeStatsSoamPmExtMinP2RFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxP2RFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgP2RFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtMinR2PFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxR2PFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgR2PFlr PerfCounter64,
f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtP2rAvailableTime PerfCounter64,
f3EsaProbeStatsSoamPmExtR2PAvailableTime PerfCounter64,
f3EsaProbeStatsSoamPmExtP2rUnavailableTime PerfCounter64,
f3EsaProbeStatsSoamPmExtR2PUnavailableTime PerfCounter64,
f3EsaProbeStatsSoamPmExtMinAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtNumAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtSumAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxP2RFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgP2RFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtNumP2RFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumP2RFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxR2PFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgR2PFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtNumR2PFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumR2PFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtMaxRTFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtAvgRTFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtNumRTFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumRTFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtSumOfSqRTFDR PerfCounter64,
f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs PerfCounter64,
f3EsaProbeStatsSoamPmExtElapsedTime PerfCounter64
}
f3EsaProbeStatsSoamPmExtMinP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum probe to reflector FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 1 }
f3EsaProbeStatsSoamPmExtMaxP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum probe to reflector FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 2 }
f3EsaProbeStatsSoamPmExtAvgP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average probe to reflector FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 3 }
f3EsaProbeStatsSoamPmExtMinR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum reflector to probe FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 4 }
f3EsaProbeStatsSoamPmExtMaxR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum reflector to probe FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 5 }
f3EsaProbeStatsSoamPmExtAvgR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average reflector to probe FLR (m%)."
::= { f3EsaProbeStatsSoamPmExtEntry 6 }
f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of delta_ts in which the FLR is greater
than availability threshold in the probe to reflector direction."
::= { f3EsaProbeStatsSoamPmExtEntry 7 }
f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of delta_ts in which the FLR is greater
than availability threshold in the reflector to probe direction."
::= { f3EsaProbeStatsSoamPmExtEntry 8 }
f3EsaProbeStatsSoamPmExtP2rAvailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the probe to reflector available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 9 }
f3EsaProbeStatsSoamPmExtR2PAvailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the reflector to probe available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 10 }
f3EsaProbeStatsSoamPmExtP2rUnavailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the probe to reflector unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 11 }
f3EsaProbeStatsSoamPmExtR2PUnavailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the reflector to probe unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 12 }
f3EsaProbeStatsSoamPmExtMinAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum absolute round-trip (two-way) jitter in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 13 }
f3EsaProbeStatsSoamPmExtMaxAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum absolute round-trip (two-way) jitter in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 14 }
f3EsaProbeStatsSoamPmExtAvgAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average absolute round-trip (two-way) jitter in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 15 }
f3EsaProbeStatsSoamPmExtNumAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of absolute round-trip (two-way) jitter samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 16 }
f3EsaProbeStatsSoamPmExtSumAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of absolute round-trip (two-way) jitter samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 17 }
f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of absolute round-trip (two-way) jitter samples (microseconds^2)."
::= { f3EsaProbeStatsSoamPmExtEntry 18 }
f3EsaProbeStatsSoamPmExtMaxP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum P2R (Forward) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 19 }
f3EsaProbeStatsSoamPmExtAvgP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average P2R (Forward) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 20 }
f3EsaProbeStatsSoamPmExtNumP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of P2R (Forward) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 21 }
f3EsaProbeStatsSoamPmExtSumP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of P2R (Forward) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 22 }
f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of P2R (Forward) FDR samples (microseconds^2)."
::= { f3EsaProbeStatsSoamPmExtEntry 23 }
f3EsaProbeStatsSoamPmExtMaxR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum R2P (Backward) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 24 }
f3EsaProbeStatsSoamPmExtAvgR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average R2P (Backward) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 25 }
f3EsaProbeStatsSoamPmExtNumR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of R2P (Backward) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 26 }
f3EsaProbeStatsSoamPmExtSumR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of R2P (Backward) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 27 }
f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of R2P (Backward) FDR samples (microseconds^2)."
::= { f3EsaProbeStatsSoamPmExtEntry 28 }
f3EsaProbeStatsSoamPmExtMaxRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum round-trip (two-way) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 29 }
f3EsaProbeStatsSoamPmExtAvgRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average round-trip (two-way) FDR in a measurement interval (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 30 }
f3EsaProbeStatsSoamPmExtNumRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of round-trip (two-way) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 31 }
f3EsaProbeStatsSoamPmExtSumRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of round-trip (two-way) FDR samples (microseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 32 }
f3EsaProbeStatsSoamPmExtSumOfSqRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of round-trip (two-way) FDR samples (microseconds^2)."
::= { f3EsaProbeStatsSoamPmExtEntry 33 }
f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 34 }
f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 35 }
f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 36 }
f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeStatsSoamPmExtEntry 37 }
f3EsaProbeStatsSoamPmExtElapsedTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds)."
::= { f3EsaProbeStatsSoamPmExtEntry 38 }
--
-- Esa Probe History Soam Pm Ext Table
--
f3EsaProbeHistorySoamPmExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3EsaProbeHistorySoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of ESA Probe MEF 35 related history kept for
a particular ESA Probe entity. These reflect the
history data."
::= { cmServAssuranceObjects 22 }
f3EsaProbeHistorySoamPmExtEntry OBJECT-TYPE
SYNTAX F3EsaProbeHistorySoamPmExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3EsaProbeHistorySoamPmExtTable."
AUGMENTS { esaProbeHistoryEntry }
::= { f3EsaProbeHistorySoamPmExtTable 1 }
F3EsaProbeHistorySoamPmExtEntry ::= SEQUENCE {
f3EsaProbeHistorySoamPmExtMinP2RFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxP2RFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgP2RFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtMinR2PFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxR2PFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgR2PFlr PerfCounter64,
f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtP2rAvailableTime PerfCounter64,
f3EsaProbeHistorySoamPmExtR2PAvailableTime PerfCounter64,
f3EsaProbeHistorySoamPmExtP2rUnavailableTime PerfCounter64,
f3EsaProbeHistorySoamPmExtR2PUnavailableTime PerfCounter64,
f3EsaProbeHistorySoamPmExtMinAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtNumAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtSumAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxP2RFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgP2RFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtNumP2RFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumP2RFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxR2PFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgR2PFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtNumR2PFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumR2PFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtMaxRTFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtAvgRTFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtNumRTFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumRTFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtSumOfSqRTFDR PerfCounter64,
f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs PerfCounter64,
f3EsaProbeHistorySoamPmExtElapsedTime PerfCounter64
}
f3EsaProbeHistorySoamPmExtMinP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum probe to reflector FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 1 }
f3EsaProbeHistorySoamPmExtMaxP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum probe to reflector FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 2 }
f3EsaProbeHistorySoamPmExtAvgP2RFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average probe to reflector FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 3 }
f3EsaProbeHistorySoamPmExtMinR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum reflector to probe FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 4 }
f3EsaProbeHistorySoamPmExtMaxR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum reflector to probe FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 5 }
f3EsaProbeHistorySoamPmExtAvgR2PFlr OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average reflector to probe FLR."
::= { f3EsaProbeHistorySoamPmExtEntry 6 }
f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of delta_ts in which the FLR is greater
than availability threshold in the probe to reflector direction."
::= { f3EsaProbeHistorySoamPmExtEntry 7 }
f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of delta_ts in which the FLR is greater
than availability threshold in the reflector to probe direction."
::= { f3EsaProbeHistorySoamPmExtEntry 8 }
f3EsaProbeHistorySoamPmExtP2rAvailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the probe to reflector available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 9 }
f3EsaProbeHistorySoamPmExtR2PAvailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the reflector to probe available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 10 }
f3EsaProbeHistorySoamPmExtP2rUnavailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the probe to reflector unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 11 }
f3EsaProbeHistorySoamPmExtR2PUnavailableTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the reflector to probe unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availability threshold for
'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 12 }
f3EsaProbeHistorySoamPmExtMinAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum absolute round-trip (two-way) jitter in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 13 }
f3EsaProbeHistorySoamPmExtMaxAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum absolute round-trip (two-way) jitter in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 14 }
f3EsaProbeHistorySoamPmExtAvgAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average absolute round-trip (two-way) jitter in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 15 }
f3EsaProbeHistorySoamPmExtNumAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of absolute round-trip (two-way) jitter samples."
::= { f3EsaProbeHistorySoamPmExtEntry 16 }
f3EsaProbeHistorySoamPmExtSumAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of absolute round-trip (two-way) jitter samples."
::= { f3EsaProbeHistorySoamPmExtEntry 17 }
f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of absolute round-trip (two-way) jitter samples."
::= { f3EsaProbeHistorySoamPmExtEntry 18 }
f3EsaProbeHistorySoamPmExtMaxP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum P2R (Forward) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 19 }
f3EsaProbeHistorySoamPmExtAvgP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average P2R (Forward) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 20 }
f3EsaProbeHistorySoamPmExtNumP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of P2R (Forward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 21 }
f3EsaProbeHistorySoamPmExtSumP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of P2R (Forward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 22 }
f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of P2R (Forward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 23 }
f3EsaProbeHistorySoamPmExtMaxR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum R2P (Backward) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 24 }
f3EsaProbeHistorySoamPmExtAvgR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average R2P (Backward) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 25 }
f3EsaProbeHistorySoamPmExtNumR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of R2P (Backward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 26 }
f3EsaProbeHistorySoamPmExtSumR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of R2P (Backward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 27 }
f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of R2P (Backward) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 28 }
f3EsaProbeHistorySoamPmExtMaxRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum round-trip (two-way) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 29 }
f3EsaProbeHistorySoamPmExtAvgRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average round-trip (two-way) FDR in a measurement interval."
::= { f3EsaProbeHistorySoamPmExtEntry 30 }
f3EsaProbeHistorySoamPmExtNumRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of round-trip (two-way) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 31 }
f3EsaProbeHistorySoamPmExtSumRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of round-trip (two-way) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 32 }
f3EsaProbeHistorySoamPmExtSumOfSqRTFDR OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of squares of round-trip (two-way) FDR samples."
::= { f3EsaProbeHistorySoamPmExtEntry 33 }
f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 34 }
f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 35 }
f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 36 }
f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts."
::= { f3EsaProbeHistorySoamPmExtEntry 37 }
f3EsaProbeHistorySoamPmExtElapsedTime OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds)."
::= { f3EsaProbeHistorySoamPmExtEntry 38 }
--
-- Notifications, i.e., traps.
--
--
-- Operate Loopback event
--
cmOperateLoopbackTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is the Operate Loopback Notification sent by the agent.
The actual attribute value is sent by the agent in the form of
a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1)."
::= { cmServAssuranceNotifications 1 }
--
-- Release Loopback event
--
cmReleaseLoopbackTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is the Release Loopback Notification sent by the agent.
The actual attribute value is sent by the agent in the form of
a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1)."
::= { cmServAssuranceNotifications 2 }
--
-- ESA Threshold Crossing Alerts
--
esaProbeThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
esaProbeStatsThresholdIndex,
esaProbeStatsThresholdVariable,
esaProbeStatsThresholdAbsValueLo,
esaProbeStatsThresholdAbsValueHi,
esaProbeStatsThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on ESA Probe is crossed."
::= { cmServAssuranceNotifications 3 }
--
-- Conformance
--
cmServAssuranceCompliances OBJECT IDENTIFIER ::= {cmServAssuranceConformance 1}
cmServAssuranceGroups OBJECT IDENTIFIER ::= {cmServAssuranceConformance 2}
cmServAssuranceCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the CM ServAssurance
group."
MODULE -- this module
MANDATORY-GROUPS {
cmServAssuranceObjectGroup, cmServAssuranceNotifGroup,
cmEcpaGroup, cmEsaGroup, cmServAssuranceGenNotifGroup,
cmServAssuranceEsaNotifGroup
}
::= { cmServAssuranceCompliances 1 }
cmServAssuranceObjectGroup OBJECT-GROUP
OBJECTS {
ecpaControlIndex, ecpaControlSourcePort, ecpaControlTestType,
ecpaControlNumFrames, ecpaControlDuration,
ecpaControlInjectorDirection, ecpaControlMonitorDirection,
ecpaControlStream1, ecpaControlStream2, ecpaControlStream3,
ecpaControlAction, ecpaControlTestStatus, ecpaControlEcpaType, ecpaControlMonitorPortType,
ecpaConfigStreamIndex, ecpaConfigStreamName, ecpaConfigStreamFrameSize,
ecpaConfigStreamRate, ecpaConfigStreamPayloadType,
ecpaConfigStreamSignature, ecpaConfigStreamDestinationMAC,
ecpaConfigStreamSourceMAC, ecpaConfigStreamOuterVlanEnabled,
ecpaConfigStreamOuterVlanId, ecpaConfigStreamOuterVlanPrio,
ecpaConfigStreamOuterVlanEtherType, ecpaConfigStreamInnerVlanEnabled,
ecpaConfigStreamInnerVlanId, ecpaConfigStreamInnerVlanPrio,
ecpaConfigStreamInnerVlanEtherType, ecpaConfigStreamIpVersion,
ecpaConfigStreamIpV4Address, ecpaConfigStreamIpV6Address,
ecpaConfigStreamPrioMapMode, ecpaConfigStreamPrioVal,
ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id,
ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType,
ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address,
ecpaConfigStreamUsePortSourceMAC, ecpaConfigStreamRateHi,
ecpaConfigStreamUdpControl, ecpaConfigStreamUdpSrcPort, ecpaConfigStreamUdpDstPort,
ecpaTestStreamIndex, ecpaTestStreamSourcePort,
ecpaTestStreamName, ecpaTestStreamFrameSize, ecpaTestStreamRate,
ecpaTestStreamPayloadType, ecpaTestStreamSignature,
ecpaTestStreamDestinationMAC, ecpaTestStreamSourceMAC,
ecpaTestStreamOuterVlanEnabled, ecpaTestStreamOuterVlanId,
ecpaTestStreamOuterVlanPrio, ecpaTestStreamOuterVlanEtherType,
ecpaTestStreamInnerVlanEnabled, ecpaTestStreamInnerVlanId,
ecpaTestStreamInnerVlanPrio, ecpaTestStreamInnerVlanEtherType,
ecpaTestStreamIpVersion, ecpaTestStreamIpV4Address,
ecpaTestStreamIpV6Address, ecpaTestStreamPrioMapMode,
ecpaTestStreamPrioVal, ecpaTestStreamMonStartTime,
ecpaTestStreamMonEndTime, ecpaTestStreamMonElapsedTime,
ecpaTestStreamMonTxFrames, ecpaTestStreamMonRxFrames,
ecpaTestStreamMonRxPercentSuccess, ecpaTestStreamMonRxOutOfSeqErrs,
ecpaTestStreamMonRxSeqGaps, ecpaTestStreamMonRxNonEcpaFrames,
ecpaTestStreamMonRxMinDelay, ecpaTestStreamMonRxMaxDelay,
ecpaTestStreamMonRxAvgDelay, ecpaTestStreamMonRx1stFrameSize,
ecpaTestStreamMonRx1stFrame1Octets, ecpaTestStreamMonRx1stFrame2Octets,
ecpaTestStreamMonRx1stFrame3Octets, ecpaTestStreamMonRx1stFrame4Octets,
ecpaTestStreamMonRx1stFrame5Octets, ecpaTestStreamMonRx1stFrame6Octets,
ecpaTestStreamMonRx1stFrame7Octets, ecpaTestStreamMonRx1stFrame8Octets,
ecpaTestStreamMonRx1stFrame9Octets, ecpaTestStreamMonRx1stFrame10Octets,
ecpaTestStreamMonRxBitRate, ecpaTestStreamInnerVlan2Enabled,
ecpaTestStreamInnerVlan2Id, ecpaTestStreamInnerVlan2Prio,
ecpaTestStreamInnerVlan2EtherType, ecpaTestStreamDestIpV4Address,
ecpaTestStreamDestIpV6Address, ecpaTestStreamConfigChanged, ecpaTestStreamRateHi,
ecpaTestStreamUdpControl, ecpaTestStreamUdpSrcPort, ecpaTestStreamUdpDstPort,
esaProbeIndex, esaProbeName, esaProbeSourcePort,
esaProbeAssocSchedGroup, esaProbeDirection,
esaProbeProtocol, esaProbeSrcIpAddress, esaProbeSrcSubnetMask,
esaProbeDestIpAddress, esaProbeSrcMep, esaProbeDestMepType,
esaProbeDestMepMacAddr, esaProbeDestMepId,
esaProbeVlanTagEnabled, esaProbeVlanTagEtherType, esaProbeVlanId, esaProbeVlanPrio,
esaProbeInnerVlanTagEnabled, esaProbeInnerVlanTagEtherType,
esaProbeInnerVlanId, esaProbeInnerVlanPrio,
esaProbeIpPrioMapMode, esaProbeIpPriority,
esaProbePktsPerSample, esaProbePktSize, esaProbeInterPktGap,
esaProbePktDeadInterval, esaProbeResponseTimeout,
esaProbeY1731DmmPktSize, esaProbeY1731LmmInterval,
esaProbeY1731DmmInterval,
esaProbeHistoryBins, esaProbeHistoryInterval,
esaProbeDistHistoryBins, esaProbeDistHistoryInterval,
esaProbeCreationTime, esaProbeStorageType,
esaProbeRowStatus,
esaProbeInner2VlanTagEnabled, esaProbeInner2VlanTagEtherType,
esaProbeInner2VlanId, esaProbeInner2VlanPrio,
esaProbeAdminState, esaProbeOperationalState, esaProbeSecondaryState,
esaProbeScheduleGroupIndex, esaProbeScheduleGroupDescr,
esaProbeScheduleGroupProbeList,
esaProbeScheduleGroupType, esaProbeScheduleGroupStartTime,
esaProbeScheduleGroupDuration, esaProbeScheduleGroupInterval,
esaProbeScheduleGroupAction, esaProbeScheduleGroupStatus,
esaProbeScheduleGroupStorageType, esaProbeScheduleGroupRowStatus,
esaProbeScheduleGroupActionProbeList,
esaReflectorIndex, esaReflectorName, esaReflectorIpAddress,
esaReflectorSubnetMask, esaReflectorSourcePort,
esaReflectorIpPrioMapMode, esaReflectorIpPriority, esaReflectorAction,
esaReflectorSuspended, esaReflectorCreationTime,
esaReflectorStorageType,
esaReflectorRowStatus,esaReflectorDirection,
esaReflectorAdminState, esaReflectorOperationalState, esaReflectorSecondaryState,
esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex,
esaProbeStatsIndex, esaProbeStatsIntervalType,
esaProbeStatsCOS, esaProbeStatsValid,
esaProbeStatsAction, esaProbeStatsP2RPkts,
esaProbeStatsP2RErredPkts, esaProbeStatsP2RSyncErrs,
esaProbeStatsP2RLostPkts, esaProbeStatsR2PPkts,
esaProbeStatsR2PErredPkts, esaProbeStatsR2PSyncErrs,
esaProbeStatsR2PLostPkts, esaProbeStatsLostPkts,
esaProbeStatsSeqGaps, esaProbeStatsOutOfSeqErrs,
esaProbeStatsMinRoundTripDelay, esaProbeStatsMaxRoundTripDelay,
esaProbeStatsAvgRoundTripDelay, esaProbeStatsSumRoundTripDelay,
esaProbeStatsSumOfSqRoundTripDelay, esaProbeStatsMinOnewayP2RDelay,
esaProbeStatsMaxOnewayP2RDelay, esaProbeStatsAvgOnewayP2RDelay,
esaProbeStatsSumOnewayP2RDelay, esaProbeStatsSumOfSqOnewayP2RDelay,
esaProbeStatsMinOnewayR2PDelay, esaProbeStatsMaxOnewayR2PDelay,
esaProbeStatsAvgOnewayR2PDelay, esaProbeStatsSumOnewayR2PDelay,
esaProbeStatsSumOfSqOnewayR2PDelay, esaProbeStatsMinPosP2RJitter,
esaProbeStatsMaxPosP2RJitter, esaProbeStatsNumPosP2RJitter,
esaProbeStatsSumPosP2RJitter, esaProbeStatsSumOfSqPosP2RJitter,
esaProbeStatsMinNegP2RJitter, esaProbeStatsMaxNegP2RJitter,
esaProbeStatsNumNegP2RJitter, esaProbeStatsSumNegP2RJitter,
esaProbeStatsSumOfSqNegP2RJitter, esaProbeStatsMinPosR2PJitter,
esaProbeStatsMaxPosR2PJitter, esaProbeStatsNumPosR2PJitter,
esaProbeStatsSumPosR2PJitter, esaProbeStatsSumOfSqPosR2PJitter,
esaProbeStatsMinNegR2PJitter, esaProbeStatsMaxNegR2PJitter,
esaProbeStatsNumNegR2PJitter, esaProbeStatsSumNegR2PJitter,
esaProbeStatsSumOfSqNegR2PJitter, esaProbeStatsY1731P2RNegLossOccurrences,
esaProbeStatsY1731R2PNegLossOccurrences, esaProbeStatsY1731RxLmSamples,
esaProbeStatsY1731RxDmSamples, esaProbeStatsY1731P2RFrames,
esaProbeStatsY1731R2PFrames, esaProbeStatsAvgAbsP2RJitter,
esaProbeStatsAvgAbsR2PJitter, esaProbeStatsMaxAbsP2RJitter,
esaProbeStatsMaxAbsR2PJitter, esaProbeStatsMinAbsP2RJitter,
esaProbeStatsMinAbsR2PJitter, esaProbeStatsNumAbsP2RJitter,
esaProbeStatsNumAbsR2PJitter, esaProbeStatsSumAbsP2RJitter,
esaProbeStatsSumAbsR2PJitter, esaProbeStatsSumOfSqAbsP2RJitter,
esaProbeStatsSumOfSqAbsR2PJitter,
esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex, esaProbeHistoryIndex,
esaProbeHistoryTime, esaProbeHistoryValid, esaProbeHistoryAction,
esaProbeHistoryCOS, esaProbeHistoryP2RPkts, esaProbeHistoryP2RErredPkts,
esaProbeHistoryP2RSyncErrs, esaProbeHistoryP2RLostPkts,
esaProbeHistoryR2PPkts, esaProbeHistoryR2PErredPkts,
esaProbeHistoryR2PSyncErrs, esaProbeHistoryR2PLostPkts,
esaProbeHistoryLostPkts, esaProbeHistorySeqGaps, esaProbeHistoryOutOfSeqErrs,
esaProbeHistoryMinRoundTripDelay, esaProbeHistoryMaxRoundTripDelay,
esaProbeHistoryAvgRoundTripDelay, esaProbeHistorySumRoundTripDelay,
esaProbeHistorySumOfSqRoundTripDelay, esaProbeHistoryMinOnewayP2RDelay,
esaProbeHistoryMaxOnewayP2RDelay, esaProbeHistoryAvgOnewayP2RDelay,
esaProbeHistorySumOnewayP2RDelay, esaProbeHistorySumOfSqOnewayP2RDelay,
esaProbeHistoryMinOnewayR2PDelay, esaProbeHistoryMaxOnewayR2PDelay,
esaProbeHistoryAvgOnewayR2PDelay, esaProbeHistorySumOnewayR2PDelay,
esaProbeHistorySumOfSqOnewayR2PDelay, esaProbeHistoryMinPosP2RJitter,
esaProbeHistoryMaxPosP2RJitter, esaProbeHistoryNumPosP2RJitter,
esaProbeHistorySumPosP2RJitter, esaProbeHistorySumOfSqPosP2RJitter,
esaProbeHistoryMinNegP2RJitter, esaProbeHistoryMaxNegP2RJitter,
esaProbeHistoryNumNegP2RJitter, esaProbeHistorySumNegP2RJitter,
esaProbeHistorySumOfSqNegP2RJitter, esaProbeHistoryMinPosR2PJitter,
esaProbeHistoryMaxPosR2PJitter, esaProbeHistoryNumPosR2PJitter,
esaProbeHistorySumPosR2PJitter, esaProbeHistorySumOfSqPosR2PJitter,
esaProbeHistoryMinNegR2PJitter, esaProbeHistoryMaxNegR2PJitter,
esaProbeHistoryNumNegR2PJitter, esaProbeHistorySumNegR2PJitter,
esaProbeHistorySumOfSqNegR2PJitter, esaProbeHistoryY1731P2RNegLossOccurrences,
esaProbeHistoryY1731R2PNegLossOccurrences, esaProbeHistoryY1731RxLmSamples,
esaProbeHistoryY1731RxDmSamples, esaProbeHistoryY1731P2RFrames,
esaProbeHistoryY1731R2PFrames, esaProbeHistoryAvgAbsP2RJitter,
esaProbeHistoryAvgAbsR2PJitter, esaProbeHistoryMaxAbsP2RJitter,
esaProbeHistoryMaxAbsR2PJitter, esaProbeHistoryMinAbsP2RJitter,
esaProbeHistoryMinAbsR2PJitter, esaProbeHistoryNumAbsP2RJitter,
esaProbeHistoryNumAbsR2PJitter, esaProbeHistorySumAbsP2RJitter,
esaProbeHistorySumAbsR2PJitter, esaProbeHistorySumOfSqAbsP2RJitter,
esaProbeHistorySumOfSqAbsR2PJitter,
esaProbeDistStatsConfigIndex, esaProbeDistStatsConfigType,
esaProbeDistStatsConfigMinVal, esaProbeDistStatsConfigMaxVal,
esaProbeDistStatsConfigNumBins,
esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex,
esaProbeDistStatsCOS, esaProbeDistStatsNumBins, esaProbeDistStatsLTMin,
esaProbeDistStatsGTMax,
esaProbeDistStatsBinIndex, esaProbeDistStatsBinLower,
esaProbeDistStatsBinUpper,
esaProbeDistStatsBinNumSamples,
esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex,
esaProbeDistHistoryCOS, esaProbeDistHistoryIndex, esaProbeDistHistoryTime,
esaProbeDistHistoryAction, esaProbeDistHistoryNumBins,
esaProbeDistHistoryLTMin, esaProbeDistHistoryGTMax,
esaProbeDistHistoryBinIndex, esaProbeDistHistoryBinLower,
esaProbeDistHistoryBinUpper,
esaProbeDistHistoryBinNumSamples,
esaProbeStatsThresholdIndex, esaProbeStatsThresholdVariable,
esaProbeStatsThresholdAbsValueLo, esaProbeStatsThresholdAbsValueHi,
esaProbeStatsThresholdMonValue,
esaProbeCOSConfigIndex, esaProbeCOSConfigType, esaProbeCOSConfigInterval,
esaProbeCOSConfigPktSize, esaProbeCOSConfigStorageType, esaProbeCOSConfigRowStatus,
esaProbeDestinationIndex, esaProbeDestinationMepType, esaProbeDestinationMepMacAddr,
esaProbeDestinationMepId, esaProbeDestinationStorageType, esaProbeDestinationRowStatus
}
STATUS deprecated
DESCRIPTION
"***************** THIS OBJECT GROUP IS NOW DEPRECATED ***************
A collection of objects used to manage the CM ServAssurance group."
::= { cmServAssuranceGroups 1 }
cmServAssuranceNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cmOperateLoopbackTrap, cmReleaseLoopbackTrap,
esaProbeThresholdCrossingAlert
}
STATUS deprecated
DESCRIPTION
"***************** THIS OBJECT GROUP IS NOW DEPRECATED ******************
A collection of notifications used in the CM ServAssurance
group."
::= { cmServAssuranceGroups 2 }
cmEcpaGroup OBJECT-GROUP
OBJECTS {
ecpaControlIndex, ecpaControlSourcePort, ecpaControlTestType,
ecpaControlNumFrames, ecpaControlDuration,
ecpaControlInjectorDirection, ecpaControlMonitorDirection,
ecpaControlStream1, ecpaControlStream2, ecpaControlStream3,
ecpaControlAction, ecpaControlTestStatus, ecpaControlStorageType,
ecpaControlRowStatus, ecpaControlEcpaType,
ecpaConfigStreamIndex, ecpaConfigStreamName, ecpaConfigStreamFrameSize,
ecpaConfigStreamRate, ecpaConfigStreamPayloadType,
ecpaConfigStreamSignature, ecpaConfigStreamDestinationMAC,
ecpaConfigStreamSourceMAC, ecpaConfigStreamOuterVlanEnabled,
ecpaConfigStreamOuterVlanId, ecpaConfigStreamOuterVlanPrio,
ecpaConfigStreamOuterVlanEtherType, ecpaConfigStreamInnerVlanEnabled,
ecpaConfigStreamInnerVlanId, ecpaConfigStreamInnerVlanPrio,
ecpaConfigStreamInnerVlanEtherType, ecpaConfigStreamIpVersion,
ecpaConfigStreamIpV4Address, ecpaConfigStreamIpV6Address,
ecpaConfigStreamPrioMapMode, ecpaConfigStreamPrioVal,
ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id,
ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType,
ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address,
ecpaConfigStreamUsePortSourceMAC, ecpaConfigStreamRateHi,
ecpaConfigStreamUdpControl, ecpaConfigStreamUdpSrcPort, ecpaConfigStreamUdpDstPort,
ecpaTestStreamIndex, ecpaTestStreamSourcePort,
ecpaTestStreamName, ecpaTestStreamFrameSize, ecpaTestStreamRate,
ecpaTestStreamPayloadType, ecpaTestStreamSignature,
ecpaTestStreamDestinationMAC, ecpaTestStreamSourceMAC,
ecpaTestStreamOuterVlanEnabled, ecpaTestStreamOuterVlanId,
ecpaTestStreamOuterVlanPrio, ecpaTestStreamOuterVlanEtherType,
ecpaTestStreamInnerVlanEnabled, ecpaTestStreamInnerVlanId,
ecpaTestStreamInnerVlanPrio, ecpaTestStreamInnerVlanEtherType,
ecpaTestStreamIpVersion, ecpaTestStreamIpV4Address,
ecpaTestStreamIpV6Address, ecpaTestStreamPrioMapMode,
ecpaTestStreamPrioVal, ecpaTestStreamMonStartTime,
ecpaTestStreamMonEndTime, ecpaTestStreamMonElapsedTime,
ecpaTestStreamMonTxFrames, ecpaTestStreamMonRxFrames,
ecpaTestStreamMonRxPercentSuccess, ecpaTestStreamMonRxOutOfSeqErrs,
ecpaTestStreamMonRxSeqGaps, ecpaTestStreamMonRxNonEcpaFrames,
ecpaTestStreamMonRxMinDelay, ecpaTestStreamMonRxMaxDelay,
ecpaTestStreamMonRxAvgDelay, ecpaTestStreamMonRx1stFrameSize,
ecpaTestStreamMonRx1stFrame1Octets, ecpaTestStreamMonRx1stFrame2Octets,
ecpaTestStreamMonRx1stFrame3Octets, ecpaTestStreamMonRx1stFrame4Octets,
ecpaTestStreamMonRx1stFrame5Octets, ecpaTestStreamMonRx1stFrame6Octets,
ecpaTestStreamMonRx1stFrame7Octets, ecpaTestStreamMonRx1stFrame8Octets,
ecpaTestStreamMonRx1stFrame9Octets, ecpaTestStreamMonRx1stFrame10Octets,
ecpaTestStreamMonRxBitRate, ecpaTestStreamInnerVlan2Enabled,
ecpaTestStreamInnerVlan2Id, ecpaTestStreamInnerVlan2Prio,
ecpaTestStreamInnerVlan2EtherType, ecpaTestStreamDestIpV4Address,
ecpaTestStreamDestIpV6Address, ecpaTestStreamConfigChanged,
ecpaTestStreamRateHi, ecpaTestStreamUdpControl, ecpaTestStreamUdpSrcPort, ecpaTestStreamUdpDstPort
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the CM ServAssurance
ECPA functionality."
::= { cmServAssuranceGroups 3 }
cmEsaGroup OBJECT-GROUP
OBJECTS {
esaProbeIndex, esaProbeName, esaProbeSourcePort,
esaProbeAssocSchedGroup, esaProbeDirection,
esaProbeProtocol, esaProbeSrcIpAddress, esaProbeSrcSubnetMask,
esaProbeDestIpAddress, esaProbeSrcMep, esaProbeDestMepType,
esaProbeDestMepMacAddr, esaProbeDestMepId,
esaProbeVlanTagEnabled, esaProbeVlanTagEtherType, esaProbeVlanId, esaProbeVlanPrio,
esaProbeInnerVlanTagEnabled, esaProbeInnerVlanTagEtherType,
esaProbeInnerVlanId, esaProbeInnerVlanPrio,
esaProbeIpPrioMapMode, esaProbeIpPriority,
esaProbePktsPerSample, esaProbePktSize, esaProbeInterPktGap,
esaProbePktDeadInterval, esaProbeResponseTimeout,
esaProbeY1731DmmPktSize, esaProbeY1731LmmInterval,
esaProbeY1731DmmInterval,
esaProbeHistoryBins, esaProbeHistoryInterval,
esaProbeDistHistoryBins, esaProbeDistHistoryInterval,
esaProbeCreationTime, esaProbeStorageType,
esaProbeRowStatus, esaProbeMultiCOSEnabled,
esaProbeSLAMonitorType, esaProbeCOSType,
esaProbeSLMMulticastMACEnabled,
esaProbeSOAMInterval, esaProbeSOAMPktSize,
esaProbeAdminState, esaProbeOperationalState,
esaProbeSecondaryState, esaProbeAlias,
esaProbeScheduleGroupIndex, esaProbeScheduleGroupDescr,
esaProbeScheduleGroupProbeList,
esaProbeScheduleGroupType, esaProbeScheduleGroupStartTime,
esaProbeScheduleGroupDuration, esaProbeScheduleGroupInterval,
esaProbeScheduleGroupAction, esaProbeScheduleGroupStatus,
esaProbeScheduleGroupStorageType, esaProbeScheduleGroupRowStatus,
esaReflectorIndex, esaReflectorName, esaReflectorIpAddress,
esaReflectorSubnetMask, esaReflectorSourcePort,
esaReflectorIpPrioMapMode, esaReflectorIpPriority, esaReflectorAction,
esaReflectorSuspended, esaReflectorCreationTime,
esaReflectorStorageType, esaReflectorRowStatus,
esaReflectorDirection, esaReflectorAdminState,
esaReflectorOperationalState, esaReflectorSecondaryState,
esaReflectorAlias,
esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex,
esaProbeStatsIndex, esaProbeStatsIntervalType,
esaProbeStatsCOS, esaProbeStatsValid,
esaProbeStatsAction, esaProbeStatsP2RPkts,
esaProbeStatsP2RErredPkts, esaProbeStatsP2RSyncErrs,
esaProbeStatsP2RLostPkts, esaProbeStatsR2PPkts,
esaProbeStatsR2PErredPkts, esaProbeStatsR2PSyncErrs,
esaProbeStatsR2PLostPkts, esaProbeStatsLostPkts,
esaProbeStatsSeqGaps, esaProbeStatsOutOfSeqErrs,
esaProbeStatsMinRoundTripDelay, esaProbeStatsMaxRoundTripDelay,
esaProbeStatsAvgRoundTripDelay, esaProbeStatsSumRoundTripDelay,
esaProbeStatsSumOfSqRoundTripDelay, esaProbeStatsMinOnewayP2RDelay,
esaProbeStatsMaxOnewayP2RDelay, esaProbeStatsAvgOnewayP2RDelay,
esaProbeStatsSumOnewayP2RDelay, esaProbeStatsSumOfSqOnewayP2RDelay,
esaProbeStatsMinOnewayR2PDelay, esaProbeStatsMaxOnewayR2PDelay,
esaProbeStatsAvgOnewayR2PDelay, esaProbeStatsSumOnewayR2PDelay,
esaProbeStatsSumOfSqOnewayR2PDelay, esaProbeStatsMinPosP2RJitter,
esaProbeStatsMaxPosP2RJitter, esaProbeStatsNumPosP2RJitter,
esaProbeStatsSumPosP2RJitter, esaProbeStatsSumOfSqPosP2RJitter,
esaProbeStatsMinNegP2RJitter, esaProbeStatsMaxNegP2RJitter,
esaProbeStatsNumNegP2RJitter, esaProbeStatsSumNegP2RJitter,
esaProbeStatsSumOfSqNegP2RJitter, esaProbeStatsMinPosR2PJitter,
esaProbeStatsMaxPosR2PJitter, esaProbeStatsNumPosR2PJitter,
esaProbeStatsSumPosR2PJitter, esaProbeStatsSumOfSqPosR2PJitter,
esaProbeStatsMinNegR2PJitter, esaProbeStatsMaxNegR2PJitter,
esaProbeStatsNumNegR2PJitter, esaProbeStatsSumNegR2PJitter,
esaProbeStatsSumOfSqNegR2PJitter, esaProbeStatsY1731P2RNegLossOccurrences,
esaProbeStatsY1731R2PNegLossOccurrences, esaProbeStatsY1731RxLmSamples,
esaProbeStatsY1731RxDmSamples, esaProbeStatsY1731P2RFrames,
esaProbeStatsY1731R2PFrames, esaProbeStatsAvgAbsP2RJitter,
esaProbeStatsAvgAbsR2PJitter, esaProbeStatsMaxAbsP2RJitter,
esaProbeStatsMaxAbsR2PJitter, esaProbeStatsMinAbsP2RJitter,
esaProbeStatsMinAbsR2PJitter, esaProbeStatsNumAbsP2RJitter,
esaProbeStatsNumAbsR2PJitter, esaProbeStatsSumAbsP2RJitter,
esaProbeStatsSumAbsR2PJitter, esaProbeStatsSumOfSqAbsP2RJitter,
esaProbeStatsSumOfSqAbsR2PJitter,
esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex, esaProbeHistoryIndex,
esaProbeHistoryTime, esaProbeHistoryValid, esaProbeHistoryAction,
esaProbeHistoryCOS, esaProbeHistoryP2RPkts, esaProbeHistoryP2RErredPkts,
esaProbeHistoryP2RSyncErrs, esaProbeHistoryP2RLostPkts,
esaProbeHistoryR2PPkts, esaProbeHistoryR2PErredPkts,
esaProbeHistoryR2PSyncErrs, esaProbeHistoryR2PLostPkts,
esaProbeHistoryLostPkts, esaProbeHistorySeqGaps, esaProbeHistoryOutOfSeqErrs,
esaProbeHistoryMinRoundTripDelay, esaProbeHistoryMaxRoundTripDelay,
esaProbeHistoryAvgRoundTripDelay, esaProbeHistorySumRoundTripDelay,
esaProbeHistorySumOfSqRoundTripDelay, esaProbeHistoryMinOnewayP2RDelay,
esaProbeHistoryMaxOnewayP2RDelay, esaProbeHistoryAvgOnewayP2RDelay,
esaProbeHistorySumOnewayP2RDelay, esaProbeHistorySumOfSqOnewayP2RDelay,
esaProbeHistoryMinOnewayR2PDelay, esaProbeHistoryMaxOnewayR2PDelay,
esaProbeHistoryAvgOnewayR2PDelay, esaProbeHistorySumOnewayR2PDelay,
esaProbeHistorySumOfSqOnewayR2PDelay, esaProbeHistoryMinPosP2RJitter,
esaProbeHistoryMaxPosP2RJitter, esaProbeHistoryNumPosP2RJitter,
esaProbeHistorySumPosP2RJitter, esaProbeHistorySumOfSqPosP2RJitter,
esaProbeHistoryMinNegP2RJitter, esaProbeHistoryMaxNegP2RJitter,
esaProbeHistoryNumNegP2RJitter, esaProbeHistorySumNegP2RJitter,
esaProbeHistorySumOfSqNegP2RJitter, esaProbeHistoryMinPosR2PJitter,
esaProbeHistoryMaxPosR2PJitter, esaProbeHistoryNumPosR2PJitter,
esaProbeHistorySumPosR2PJitter, esaProbeHistorySumOfSqPosR2PJitter,
esaProbeHistoryMinNegR2PJitter, esaProbeHistoryMaxNegR2PJitter,
esaProbeHistoryNumNegR2PJitter, esaProbeHistorySumNegR2PJitter,
esaProbeHistorySumOfSqNegR2PJitter, esaProbeHistoryY1731P2RNegLossOccurrences,
esaProbeHistoryY1731R2PNegLossOccurrences, esaProbeHistoryY1731RxLmSamples,
esaProbeHistoryY1731RxDmSamples, esaProbeHistoryY1731P2RFrames,
esaProbeHistoryY1731R2PFrames, esaProbeHistoryAvgAbsP2RJitter,
esaProbeHistoryAvgAbsR2PJitter, esaProbeHistoryMaxAbsP2RJitter,
esaProbeHistoryMaxAbsR2PJitter, esaProbeHistoryMinAbsP2RJitter,
esaProbeHistoryMinAbsR2PJitter, esaProbeHistoryNumAbsP2RJitter,
esaProbeHistoryNumAbsR2PJitter, esaProbeHistorySumAbsP2RJitter,
esaProbeHistorySumAbsR2PJitter, esaProbeHistorySumOfSqAbsP2RJitter,
esaProbeHistorySumOfSqAbsR2PJitter,
esaProbeDistStatsConfigIndex, esaProbeDistStatsConfigType,
esaProbeDistStatsConfigMinVal, esaProbeDistStatsConfigMaxVal,
esaProbeDistStatsConfigNumBins,
esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex,
esaProbeDistStatsCOS, esaProbeDistStatsNumBins, esaProbeDistStatsLTMin,
esaProbeDistStatsGTMax,
esaProbeDistStatsBinIndex, esaProbeDistStatsBinLower,
esaProbeDistStatsBinUpper,
esaProbeDistStatsBinNumSamples,
esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex,
esaProbeDistHistoryCOS, esaProbeDistHistoryIndex, esaProbeDistHistoryTime,
esaProbeDistHistoryAction, esaProbeDistHistoryNumBins,
esaProbeDistHistoryLTMin, esaProbeDistHistoryGTMax,
esaProbeDistHistoryBinIndex, esaProbeDistHistoryBinLower,
esaProbeDistHistoryBinUpper,
esaProbeDistHistoryBinNumSamples,
esaProbeStatsThresholdIndex, esaProbeStatsThresholdVariable,
esaProbeStatsThresholdAbsValueLo, esaProbeStatsThresholdAbsValueHi,
esaProbeStatsThresholdMonValue,
esaProbeCOSConfigIndex, esaProbeCOSConfigType, esaProbeCOSConfigInterval,
esaProbeCOSConfigPktSize, esaProbeCOSConfigStorageType, esaProbeCOSConfigRowStatus,
esaProbeCOSConfigslmInterval, esaProbeCOSConfigslmPktSize,
esaProbeCOSConfigSoamPmExtAvailFlrThreshold,
esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus,
esaProbeCOSConfigSoamPmExtConDeltaTsForAvail,
esaProbeDestinationIndex,esaProbeDestinationMepType, esaProbeDestinationMepMacAddr,
esaProbeDestinationMepId,esaProbeDestinationStorageType,esaProbeDestinationRowStatus,
f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold,
f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus,
f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail,
f3EsaProbeStatsSoamPmExtMinP2RFlr, f3EsaProbeStatsSoamPmExtMaxP2RFlr, f3EsaProbeStatsSoamPmExtAvgP2RFlr,
f3EsaProbeStatsSoamPmExtMinR2PFlr, f3EsaProbeStatsSoamPmExtMaxR2PFlr, f3EsaProbeStatsSoamPmExtAvgR2PFlr,
f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs, f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs,
f3EsaProbeStatsSoamPmExtP2rAvailableTime, f3EsaProbeStatsSoamPmExtR2PAvailableTime,
f3EsaProbeStatsSoamPmExtP2rUnavailableTime, f3EsaProbeStatsSoamPmExtR2PUnavailableTime,
f3EsaProbeStatsSoamPmExtMinAbsRTJitter, f3EsaProbeStatsSoamPmExtMaxAbsRTJitter, f3EsaProbeStatsSoamPmExtAvgAbsRTJitter,
f3EsaProbeStatsSoamPmExtNumAbsRTJitter, f3EsaProbeStatsSoamPmExtSumAbsRTJitter, f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter,
f3EsaProbeStatsSoamPmExtMaxP2RFDR, f3EsaProbeStatsSoamPmExtAvgP2RFDR, f3EsaProbeStatsSoamPmExtNumP2RFDR,
f3EsaProbeStatsSoamPmExtSumP2RFDR, f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR,
f3EsaProbeStatsSoamPmExtMaxR2PFDR, f3EsaProbeStatsSoamPmExtAvgR2PFDR, f3EsaProbeStatsSoamPmExtNumR2PFDR,
f3EsaProbeStatsSoamPmExtSumR2PFDR, f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR,
f3EsaProbeStatsSoamPmExtMaxRTFDR, f3EsaProbeStatsSoamPmExtAvgRTFDR, f3EsaProbeStatsSoamPmExtNumRTFDR,
f3EsaProbeStatsSoamPmExtSumRTFDR, f3EsaProbeStatsSoamPmExtSumOfSqRTFDR,
f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs, f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs,
f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs, f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs,
f3EsaProbeStatsSoamPmExtElapsedTime,
f3EsaProbeHistorySoamPmExtMinP2RFlr, f3EsaProbeHistorySoamPmExtMaxP2RFlr, f3EsaProbeHistorySoamPmExtAvgP2RFlr,
f3EsaProbeHistorySoamPmExtMinR2PFlr, f3EsaProbeHistorySoamPmExtMaxR2PFlr, f3EsaProbeHistorySoamPmExtAvgR2PFlr,
f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs, f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs,
f3EsaProbeHistorySoamPmExtP2rAvailableTime, f3EsaProbeHistorySoamPmExtR2PAvailableTime,
f3EsaProbeHistorySoamPmExtP2rUnavailableTime, f3EsaProbeHistorySoamPmExtR2PUnavailableTime,
f3EsaProbeHistorySoamPmExtMinAbsRTJitter, f3EsaProbeHistorySoamPmExtMaxAbsRTJitter, f3EsaProbeHistorySoamPmExtAvgAbsRTJitter,
f3EsaProbeHistorySoamPmExtNumAbsRTJitter, f3EsaProbeHistorySoamPmExtSumAbsRTJitter, f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter,
f3EsaProbeHistorySoamPmExtMaxP2RFDR, f3EsaProbeHistorySoamPmExtAvgP2RFDR, f3EsaProbeHistorySoamPmExtNumP2RFDR,
f3EsaProbeHistorySoamPmExtSumP2RFDR, f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR,
f3EsaProbeHistorySoamPmExtMaxR2PFDR, f3EsaProbeHistorySoamPmExtAvgR2PFDR, f3EsaProbeHistorySoamPmExtNumR2PFDR,
f3EsaProbeHistorySoamPmExtSumR2PFDR, f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR,
f3EsaProbeHistorySoamPmExtMaxRTFDR, f3EsaProbeHistorySoamPmExtAvgRTFDR, f3EsaProbeHistorySoamPmExtNumRTFDR,
f3EsaProbeHistorySoamPmExtSumRTFDR, f3EsaProbeHistorySoamPmExtSumOfSqRTFDR,
f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs, f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs,
f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs, f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs,
f3EsaProbeHistorySoamPmExtElapsedTime
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the CM ServAssurance
ESA functionality."
::= { cmServAssuranceGroups 4 }
cmServAssuranceGenNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cmOperateLoopbackTrap, cmReleaseLoopbackTrap
}
STATUS current
DESCRIPTION
"A collection of notifications used in the generic CM ServAssurance
functionality."
::= { cmServAssuranceGroups 5 }
cmServAssuranceEsaNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
esaProbeThresholdCrossingAlert
}
STATUS current
DESCRIPTION
"A collection of notifications used in the CM ServAssurance
ESA functionality."
::= { cmServAssuranceGroups 6 }
cmBertGroup OBJECT-GROUP
OBJECTS {
bertControlIndex, bertControlSourceEntity, bertControlTestMode, bertControlDuration,
bertControlStream, bertControlAction, bertControlTestStatus,
bertConfigStreamIndex, bertConfigStreamName, bertConfigStreamTxPattern,
bertConfigStreamErrInjectEnabled, bertConfigStreamErrInjectRate, bertConfigStreamErrInjectRateMultiplier,
bertConfigStreamUserPatternLength, bertConfigStreamUserPattern,
bertTestStreamIndex, bertTestStreamName, bertTestStreamTxPattern, bertTestStreamErrInjectEnabled,
bertTestStreamErrInjectRate, bertTestStreamErrInjectRateMultiplier, bertTestStreamUserPatternLength,
bertTestStreamUserPattern, bertTestStreamMonStartTime, bertTestStreamMonEndTime,
bertTestStreamMonElapsedTime, bertTestStreamMonSyncState, bertTestStreamMonRxPattern,
bertTestStreamMonSyncCounts, bertTestStreamMonRxBitErrsSinceStart, bertTestStreamMonRxBitsSinceStart,
bertTestStreamMonRxESsSinceStart, bertTestStreamMonRxErrRateSinceStart,
bertTestStreamMonRxErrRateMultiplierSinceStart,
bertTestStreamMonRxBitErrsSinceLastSync, bertTestStreamMonRxBitsSinceLastSync,
bertTestStreamMonRxESsSinceLastSync, bertTestStreamMonRxErrRateSinceLastSync,
bertTestStreamMonRxErrRateMultiplierSinceLastSync, bertTestStreamConfigChangedFlag,
bertTestStreamMonOOSSsSinceStart
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the CM ServAssurance
BERT functionality."
::= { cmServAssuranceGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink