740 lines
27 KiB
Plaintext
740 lines
27 KiB
Plaintext
F3-AMP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
TruthValue, RowStatus, StorageType, DisplayString,
|
|
DateAndTime, VariablePointer, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
fsp150cm
|
|
FROM ADVA-MIB
|
|
VlanId
|
|
FROM CM-COMMON-MIB
|
|
IpSourceAddrType, IpManagementTunnelType, IpManagementTunnelEncapsulationType
|
|
FROM CM-IP-MIB;
|
|
|
|
f3AMPMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209310000Z"
|
|
ORGANIZATION "ADVA Optical Networking"
|
|
CONTACT-INFO
|
|
" Jakub Zalewski
|
|
ADVA Optical Networking, Inc.
|
|
Tel: +48 58 7716 411
|
|
E-mail: jzalewski@advaoptical.com
|
|
Postal: ul. Slaska 35/37
|
|
81-310 Gdynia, Poland"
|
|
DESCRIPTION
|
|
"This module defines the Automatic Management Provisioning MIB definitions
|
|
used by the F3 (FSP150CM/CC) product lines.
|
|
Copyright (C) ADVA Optical Networking."
|
|
REVISION "201209300000Z"
|
|
DESCRIPTION
|
|
"
|
|
Notes from release 201209300000Z,
|
|
(1)MIB version ready for release FSP150CC 5.6CC."
|
|
|
|
::= {fsp150cm 24}
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
AMPRole ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines client or server role."
|
|
SYNTAX INTEGER {
|
|
client (1),
|
|
server (2)
|
|
}
|
|
|
|
AMPStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines AMP Status."
|
|
SYNTAX INTEGER {
|
|
notAvailable (1),
|
|
disabled (2),
|
|
associatingActive (3),
|
|
associatingPassive (4),
|
|
associated (5),
|
|
noPeer (6)
|
|
}
|
|
|
|
AMPConfigStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines AMP Configuration Status."
|
|
SYNTAX INTEGER {
|
|
none (1), -- none
|
|
provision (2), -- provision request sent to Client
|
|
noPeer (3), -- no EFM peer
|
|
request (4), -- provisioning request received by Client
|
|
configSuccess (5), -- configuration succeeded on Client
|
|
configFail (6), -- congiguration failed on Client
|
|
timeout (7) -- response timeout
|
|
}
|
|
|
|
AMPProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines protocol over which AMP messages are sent."
|
|
SYNTAX INTEGER {
|
|
efmOam (1)
|
|
}
|
|
|
|
AMPConfigAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines Actions available for f3AmpConfig object"
|
|
SYNTAX INTEGER {
|
|
noAction (1),
|
|
clearStats (2)
|
|
}
|
|
|
|
--
|
|
-- OID definitions
|
|
--
|
|
f3AmpConfigObjects OBJECT IDENTIFIER ::= {f3AMPMIB 1}
|
|
f3AmpStatsObjects OBJECT IDENTIFIER ::= {f3AMPMIB 2}
|
|
f3AmpConformance OBJECT IDENTIFIER ::= {f3AMPMIB 3}
|
|
|
|
|
|
--
|
|
-- AMP Client/Server Configuration table
|
|
--
|
|
f3AmpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3AmpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to Automatic Management Provisioning
|
|
configuration instance for configuration purposes."
|
|
::= { f3AmpConfigObjects 1 }
|
|
|
|
f3AmpConfigEntry OBJECT-TYPE
|
|
SYNTAX F3AmpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3AmpConfigTable."
|
|
INDEX { f3AmpConfigIndex }
|
|
::= { f3AmpConfigTable 1 }
|
|
|
|
F3AmpConfigEntry ::= SEQUENCE {
|
|
f3AmpConfigIndex Integer32,
|
|
f3AmpConfigRole AMPRole,
|
|
f3AmpConfigProtocol AMPProtocol,
|
|
f3AmpConfigEnabled TruthValue,
|
|
f3AmpConfigPort VariablePointer,
|
|
f3AmpConfigStatus AMPStatus,
|
|
f3AmpConfigRemSysName DisplayString,
|
|
f3AmpConfigRemSysIpAddr IpAddress,
|
|
f3AmpConfigRemSysIpMask IpAddress,
|
|
f3AmpConfigRemSysDefGateway IpAddress,
|
|
f3AmpConfigRemSysSNMPV1IfName DisplayString,
|
|
f3AmpConfigRemSysSrcIpAddrType IpSourceAddrType,
|
|
f3AmpConfigRemSysSrcIpAddrIfName DisplayString,
|
|
f3AmpConfigRemTunnelIndex Integer32,
|
|
f3AmpConfigRemTunnelName DisplayString,
|
|
f3AmpConfigRemTunnelType IpManagementTunnelType,
|
|
f3AmpConfigRemTunnelIpAddr IpAddress,
|
|
f3AmpConfigRemTunnelIpMask IpAddress,
|
|
f3AmpConfigRemTunnelVlanId VlanId,
|
|
f3AmpConfigRemTunnelSVlanId VlanId,
|
|
f3AmpConfigRemTunnelSVlanIdEnabled TruthValue,
|
|
f3AmpConfigRemTunnelRip2PktsEnabled TruthValue,
|
|
f3AmpConfigRemTunnelCOS Integer32,
|
|
f3AmpConfigRemTunnelCIR Unsigned32,
|
|
f3AmpConfigRemTunnelEIR Unsigned32,
|
|
f3AmpConfigRemTunnelBufferSize Unsigned32,
|
|
f3AmpConfigRemTunnelEncapType IpManagementTunnelEncapsulationType,
|
|
f3AmpConfigRemTunnelMtu Integer32,
|
|
f3AmpConfigAction AMPConfigAction,
|
|
f3AmpConfigStorageType StorageType,
|
|
f3AmpConfigRowStatus RowStatus
|
|
}
|
|
|
|
f3AmpConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index value used to uniquely identify
|
|
this AMP Config within the System."
|
|
::= { f3AmpConfigEntry 1 }
|
|
|
|
f3AmpConfigRole OBJECT-TYPE
|
|
SYNTAX AMPRole
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures AMP instance to be either Client or Server."
|
|
::= { f3AmpConfigEntry 2 }
|
|
|
|
f3AmpConfigProtocol OBJECT-TYPE
|
|
SYNTAX AMPProtocol
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures protocol over which AMP message will be transported."
|
|
::= { f3AmpConfigEntry 3 }
|
|
|
|
f3AmpConfigEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or Disables AMP on a Port."
|
|
::= { f3AmpConfigEntry 4 }
|
|
|
|
f3AmpConfigPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port on which AMP Server or Client will operate. This port will
|
|
transmit/receive AMP messages. The AMP can operate on Access Ports and
|
|
Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex
|
|
or cmEthernetNetPortIndex."
|
|
::= { f3AmpConfigEntry 5 }
|
|
|
|
f3AmpConfigStatus OBJECT-TYPE
|
|
SYNTAX AMPStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Status of AMP."
|
|
::= { f3AmpConfigEntry 6 }
|
|
|
|
f3AmpConfigRemSysName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies sysName which is sent
|
|
in a AMP message to be configfured on a AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the sysName
|
|
value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 7 }
|
|
|
|
f3AmpConfigRemSysIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies System IP address
|
|
which is sent in a AMP message to be configfured on a AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
System IP address value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 8 }
|
|
|
|
f3AmpConfigRemSysIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies System IP mask
|
|
which is sent in a AMP message to be configfured on a AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
System IP mask value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 9 }
|
|
|
|
f3AmpConfigRemSysDefGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies System Default Gateway
|
|
which is sent in a AMP message to be configfured on a AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
System Default Gateway value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 10 }
|
|
|
|
f3AmpConfigRemSysSNMPV1IfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
System SNMPV1 Interface Name which is sent
|
|
in a AMP message to be configfured on a AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object shows the
|
|
System SNMPV1 Interface Name value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 11 }
|
|
|
|
f3AmpConfigRemSysSrcIpAddrType OBJECT-TYPE
|
|
SYNTAX IpSourceAddrType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies System Source IP Address
|
|
type which is sent in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
System Source IP Address Type value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 12 }
|
|
|
|
f3AmpConfigRemSysSrcIpAddrIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies System Source IP
|
|
Interface name sent in an AMP message to be configured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object shows the SystemSource IP Interface
|
|
value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 13 }
|
|
|
|
f3AmpConfigRemTunnelIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
index of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
index of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 14 }
|
|
|
|
f3AmpConfigRemTunnelName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
a Management Tunnel name which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
Management Tunnel name which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 15 }
|
|
|
|
f3AmpConfigRemTunnelType OBJECT-TYPE
|
|
SYNTAX IpManagementTunnelType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
a Management Tunnel type value which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
Management Tunnel type value which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 16 }
|
|
|
|
f3AmpConfigRemTunnelIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
IP Address of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
IP Address of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 17 }
|
|
|
|
f3AmpConfigRemTunnelIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
IP Mask of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
IP Mask of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 18 }
|
|
|
|
f3AmpConfigRemTunnelVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
VlanId of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
VlanId of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 19 }
|
|
|
|
f3AmpConfigRemTunnelSVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
S-TAG VlanId of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
S-TAG VlanId of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 20 }
|
|
|
|
f3AmpConfigRemTunnelSVlanIdEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
a Management Tunnel S-TAG VlanId Enable value which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
a Management Tunnel S-TAG VlanId Enabled value which was received
|
|
from the AMP Server."
|
|
::= { f3AmpConfigEntry 21 }
|
|
|
|
f3AmpConfigRemTunnelRip2PktsEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
a Management Tunnel RIP2 Packates Enabled value which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
a Management Tunnel RIP2 Packates Enabled value which was received
|
|
from the AMP Server."
|
|
::= { f3AmpConfigEntry 22 }
|
|
|
|
f3AmpConfigRemTunnelCOS OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
COS of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
COS of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 23 }
|
|
|
|
f3AmpConfigRemTunnelCIR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
CIR of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
CIR of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 24 }
|
|
|
|
f3AmpConfigRemTunnelEIR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
EIR of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
EIR of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 25 }
|
|
|
|
f3AmpConfigRemTunnelBufferSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
Buffer Size of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
Buffer Size of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 26 }
|
|
|
|
f3AmpConfigRemTunnelEncapType OBJECT-TYPE
|
|
SYNTAX IpManagementTunnelEncapsulationType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
Encapsulation Type of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
Encapsulation Type of a Management Tunnel which was received from
|
|
the AMP Server."
|
|
::= { f3AmpConfigEntry 27 }
|
|
|
|
f3AmpConfigRemTunnelMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When f3AmpConfigRole is 'server' this object specifies
|
|
MTU of a Management Tunnel which is sent
|
|
in an AMP message to be configfured on an AMP Client device.
|
|
When f3AmpConfigRole is 'client' this object is read-only and shows the
|
|
MTU of a Management Tunnel which was received from the AMP Server."
|
|
::= { f3AmpConfigEntry 28 }
|
|
|
|
f3AmpConfigAction OBJECT-TYPE
|
|
SYNTAX AMPConfigAction
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object may be used to initiate user action on this AMP Config instance."
|
|
::= { f3AmpConfigEntry 29 }
|
|
|
|
f3AmpConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { f3AmpConfigEntry 30 }
|
|
|
|
f3AmpConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row. An entry MUST NOT exist in the
|
|
active state unless all objects in the entry have an
|
|
appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of f3AmpConfigRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
neRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this object has a
|
|
value of active(1).
|
|
|
|
The f3AmpConfigRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
|
|
::= { f3AmpConfigEntry 31 }
|
|
|
|
--
|
|
-- AMP Stats
|
|
--
|
|
f3AmpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3AmpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to Automatic Management Provisioning
|
|
Statistics"
|
|
::= { f3AmpStatsObjects 1 }
|
|
|
|
f3AmpStatsEntry OBJECT-TYPE
|
|
SYNTAX F3AmpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3AmpStatsTable."
|
|
INDEX { f3AmpConfigIndex }
|
|
::= { f3AmpStatsTable 1 }
|
|
|
|
F3AmpStatsEntry ::= SEQUENCE {
|
|
f3AmpStatsProvDataTx Unsigned32,
|
|
f3AmpStatsProvDataRx Unsigned32,
|
|
f3AmpStatsProvRequestTx Unsigned32,
|
|
f3AmpStatsProvRequestRx Unsigned32,
|
|
f3AmpStatsConfigSuccessTx Unsigned32,
|
|
f3AmpStatsConfigSuccessRx Unsigned32,
|
|
f3AmpStatsConfigFailTx Unsigned32,
|
|
f3AmpStatsConfigFailRx Unsigned32,
|
|
f3AmpStatsSpuriousMessageRx Unsigned32,
|
|
f3AmpStatsTimeoutRx Unsigned32,
|
|
f3AmpStatsLastRxStatus AMPConfigStatus,
|
|
f3AmpStatsRxTimeStamp DateAndTime,
|
|
f3AmpStatsLastTxStatus AMPConfigStatus,
|
|
f3AmpStatsTxTimeStamp DateAndTime
|
|
}
|
|
|
|
f3AmpStatsProvDataTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Provisioning Data messages sent by AMP Server."
|
|
::= { f3AmpStatsEntry 1 }
|
|
|
|
f3AmpStatsProvDataRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Provisioning Data messages received by AMP Client."
|
|
::= { f3AmpStatsEntry 2 }
|
|
|
|
f3AmpStatsProvRequestTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Provisioning Request messages sent by AMP Client."
|
|
::= { f3AmpStatsEntry 3 }
|
|
|
|
f3AmpStatsProvRequestRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Provisioning Request received sent by AMP Server."
|
|
::= { f3AmpStatsEntry 4 }
|
|
|
|
f3AmpStatsConfigSuccessTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Configuration Success messages sent sent by AMP Client."
|
|
::= { f3AmpStatsEntry 5 }
|
|
|
|
f3AmpStatsConfigSuccessRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Configuration Success messages received by AMP Server."
|
|
::= { f3AmpStatsEntry 6 }
|
|
|
|
f3AmpStatsConfigFailTx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Configuration Success messages received by AMP Client."
|
|
::= { f3AmpStatsEntry 7 }
|
|
|
|
f3AmpStatsConfigFailRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Configuration Success messages received by AMP Server."
|
|
::= { f3AmpStatsEntry 8 }
|
|
|
|
f3AmpStatsSpuriousMessageRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Spurious messages received by AMP Client or Server"
|
|
::= { f3AmpStatsEntry 9 }
|
|
|
|
f3AmpStatsTimeoutRx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages which were not received within the time out value.
|
|
AMP Client can time out while waiting for Prov Data message.
|
|
AMP Server can time out while waiting for Config Fail or Config Success
|
|
message."
|
|
::= { f3AmpStatsEntry 10 }
|
|
|
|
f3AmpStatsLastRxStatus OBJECT-TYPE
|
|
SYNTAX AMPConfigStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last received Configuration Status."
|
|
::= { f3AmpStatsEntry 11 }
|
|
|
|
f3AmpStatsRxTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time of last received Configuration Status."
|
|
::= { f3AmpStatsEntry 12 }
|
|
|
|
f3AmpStatsLastTxStatus OBJECT-TYPE
|
|
SYNTAX AMPConfigStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last sent Configuration Status."
|
|
::= { f3AmpStatsEntry 13 }
|
|
|
|
f3AmpStatsTxTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time of last sent Configuration Status."
|
|
::= { f3AmpStatsEntry 14 }
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
f3AmpCompliances OBJECT IDENTIFIER ::= {f3AmpConformance 1}
|
|
f3AmpGroups OBJECT IDENTIFIER ::= {f3AmpConformance 2}
|
|
|
|
f3AmpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the F3-AMP-MIB compilance."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
f3AmpConfigGroup, f3AmpStatsGroup
|
|
}
|
|
::= { f3AmpCompliances 1 }
|
|
|
|
f3AmpConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3AmpConfigRole,
|
|
f3AmpConfigProtocol,
|
|
f3AmpConfigEnabled,
|
|
f3AmpConfigPort,
|
|
f3AmpConfigStatus,
|
|
f3AmpConfigRemSysName,
|
|
f3AmpConfigRemSysIpAddr,
|
|
f3AmpConfigRemSysIpMask,
|
|
f3AmpConfigRemSysDefGateway,
|
|
f3AmpConfigRemSysSNMPV1IfName,
|
|
f3AmpConfigRemSysSrcIpAddrType,
|
|
f3AmpConfigRemSysSrcIpAddrIfName,
|
|
f3AmpConfigRemTunnelIndex,
|
|
f3AmpConfigRemTunnelName,
|
|
f3AmpConfigRemTunnelType,
|
|
f3AmpConfigRemTunnelIpAddr,
|
|
f3AmpConfigRemTunnelIpMask,
|
|
f3AmpConfigRemTunnelVlanId,
|
|
f3AmpConfigRemTunnelSVlanId,
|
|
f3AmpConfigRemTunnelSVlanIdEnabled,
|
|
f3AmpConfigRemTunnelRip2PktsEnabled,
|
|
f3AmpConfigRemTunnelCOS,
|
|
f3AmpConfigRemTunnelCIR,
|
|
f3AmpConfigRemTunnelEIR,
|
|
f3AmpConfigRemTunnelBufferSize,
|
|
f3AmpConfigRemTunnelEncapType,
|
|
f3AmpConfigRemTunnelMtu,
|
|
f3AmpConfigAction,
|
|
f3AmpConfigStorageType,
|
|
f3AmpConfigRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the AMP Configuration."
|
|
::= { f3AmpGroups 1 }
|
|
|
|
f3AmpStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3AmpStatsProvDataTx,
|
|
f3AmpStatsProvDataRx,
|
|
f3AmpStatsProvRequestTx,
|
|
f3AmpStatsProvRequestRx,
|
|
f3AmpStatsConfigSuccessTx,
|
|
f3AmpStatsConfigSuccessRx,
|
|
f3AmpStatsConfigFailTx,
|
|
f3AmpStatsConfigFailRx,
|
|
f3AmpStatsSpuriousMessageRx,
|
|
f3AmpStatsTimeoutRx,
|
|
f3AmpStatsLastRxStatus,
|
|
f3AmpStatsRxTimeStamp,
|
|
f3AmpStatsLastTxStatus,
|
|
f3AmpStatsTxTimeStamp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the AMP Statistics."
|
|
::= { f3AmpGroups 2 }
|
|
|
|
END
|