mibs/MIBS/adva/F3-ERP-MIB
2023-12-05 12:25:34 +01:00

1086 lines
37 KiB
Plaintext

F3-ERP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
FROM SNMPv2-SMI
TruthValue, RowStatus, StorageType, DisplayString,
MacAddress, VariablePointer, TEXTUAL-CONVENTION
FROM SNMPv2-TC
neIndex
FROM CM-ENTITY-MIB
fsp150cm
FROM ADVA-MIB
AdminState, OperationalState, SecondaryState,
VlanId, VlanPriority, VlanEthertype
FROM CM-COMMON-MIB
Dot1agCfmMDLevel
FROM IEEE8021-CFM-MIB
CmProtUnitType, CmProtUnitState
FROM CM-PROTECTION-MIB;
f3ErpMIB MODULE-IDENTITY
LAST-UPDATED "201209130000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO
" Jakub Zalewski
ADVA Optical Networking, Inc.
Tel: +48 58 7716 411
E-mail: jzalewski@advaoptical.com
Postal: ul. Slaska 35/37
81-310 Gdynia, Poland"
DESCRIPTION
"This module defines the G.8032 Ethernet Ring Protection MIB definitions
used by the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking."
REVISION "201209130000Z"
DESCRIPTION
"
Notes from release 201209130000Z,
(1)MIB version ready for release FSP150CC 5.6CC."
::= {fsp150cm 25}
--
-- Textual Conventions
--
G8032Version ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Version of G.8032 ERP protocol"
SYNTAX INTEGER {
v1 (1),
v2 (2)
}
RPLRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ring Protocol Link role"
SYNTAX INTEGER {
none (1),
neighbor (2),
owner (3)
}
RingPortStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Status of Ring Port"
SYNTAX INTEGER {
unblocked (1),
unblockedSF (2),
unblockedSD (3),
blockedRPL (4),
blockedSF (5),
blockedSD (6),
blockedMS (7),
blockedFS (8),
blockedPending (9),
subringInterConnect (10),
subringInterConnectSF (11)
}
RingNodeState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"State of Ring Port"
SYNTAX INTEGER {
idle (1),
protection (2),
manual (3),
forced (4),
pending (5)
}
RAPSRequest ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ring Automatic Protection Switch Request"
SYNTAX INTEGER {
noRequest (1),
manual (2),
forced (3),
signailFail (4),
signailDegrade (5),
notApplicable (6)
}
ERPGroupAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"User action initiated on ERP group"
SYNTAX INTEGER {
noAction (1),
forcedSwitch (2),
manualSwitch (3),
clearSwitch (4),
resetStats (5)
}
RapsInterconnectionNode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Role of the sub-ring interconnection node"
SYNTAX INTEGER {
none (1),
primary (2),
secondary (3)
}
RapsMultipleFailure ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interconnection node that has to perform the
Manual Switch for minimizing interconnected ring segmentation"
SYNTAX INTEGER {
disabled (1),
primary (2),
secondary (3)
}
--
-- OID definitions
--
f3ErpConfigObjects OBJECT IDENTIFIER ::= {f3ErpMIB 1}
f3ErpStatsObjects OBJECT IDENTIFIER ::= {f3ErpMIB 2}
f3ErpConformance OBJECT IDENTIFIER ::= {f3ErpMIB 3}
--
-- Ethernet Ring Protection Group
--
f3ErpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3ErpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Ethernet Ring Protection
instance for configuration purposes."
::= { f3ErpConfigObjects 1 }
f3ErpGroupEntry OBJECT-TYPE
SYNTAX F3ErpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3ErpGroupTable."
INDEX { neIndex, f3ErpGroupIndex }
::= { f3ErpGroupTable 1 }
F3ErpGroupEntry ::= SEQUENCE {
f3ErpGroupIndex Integer32,
f3ErpGroupAdminState AdminState,
f3ErpGroupOperationalState OperationalState,
f3ErpGroupSecondaryState SecondaryState,
f3ErpGroupRapsRingId Integer32,
f3ErpGroupRapsNodeId MacAddress,
f3ErpGroupRapsVlanId VlanId,
f3ErpGroupRapsVlanPrio VlanPriority,
f3ErpGroupRapsVlanEtherType Unsigned32,
f3ErpGroupRapsMdLevel Dot1agCfmMDLevel,
f3ErpGroupCompatibleVersion G8032Version,
f3ErpGroupRevertive TruthValue,
f3ErpGroupSubRingWithoutVirtChan TruthValue,
f3ErpGroupGuardTime Integer32,
f3ErpGroupWaitToRestore Integer32,
f3ErpGroupHoldOffTime Integer32,
f3ErpGroupRingPort0 VariablePointer,
f3ErpGroupRingPort0MEP VariablePointer,
f3ErpGroupRingPort0Role RPLRole,
f3ErpGroupRingPort1 VariablePointer,
f3ErpGroupRingPort1MEP VariablePointer,
f3ErpGroupRingPort1Role RPLRole,
f3ErpGroupProtectMgmtTunnel TruthValue,
f3ErpGroupNodeState RingNodeState,
f3ErpGroupWTRRemainingTime Integer32,
f3ErpGroupTxRapsRequest RAPSRequest,
f3ErpGroupTxRapsRplBlocked TruthValue,
f3ErpGroupTxRapsDNF TruthValue,
f3ErpGroupTxRapsBPR Integer32,
f3ErpGroupAction ERPGroupAction,
f3ErpGroupActionObject VariablePointer,
f3ErpGroupUserLabel DisplayString,
f3ErpGroupStorageType StorageType,
f3ErpGroupRowStatus RowStatus,
f3ErpGroupInterconnectionErp VariablePointer,
f3ErpGroupInterconnectPropagateTc TruthValue,
f3ErpGroupRapsVirtualChannelMep VariablePointer,
f3ErpGroupMaxFpNum Integer32,
f3ErpGroupRapsInterconnectionNode RapsInterconnectionNode,
f3ErpGroupRapsMultipleFailure RapsMultipleFailure
}
f3ErpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
this ERP Group within Network Element."
::= { f3ErpGroupEntry 1 }
f3ErpGroupAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative State of this ERP instance.
INSERVICE is normal operation.
MANAGEMENT suppresses alarms.
DISABLED initiates blocking on ring port 0 and stops all RAPS processing
and forwarding.
The ERP instance must be in the MANAGEMENT or DISABLED state when modifying
the following ERP instance attributes: rapsVID, ringPort0, ringPort1,
ringPort0RPLRole, ringPort1RPLRole, rapsRingId, rapsMdLevel,
subRingWithoutVirtualChannel, compatibleVersion."
::= { f3ErpGroupEntry 2 }
f3ErpGroupOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational State of this ERP instance. The ERP operational state is
outage when there is an equipment failure causing the ERP to be non-functional;
otherwise the operational state is normal."
::= { f3ErpGroupEntry 3 }
f3ErpGroupSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary State of this ERP instance. The ERP secondary state is
supporting entity outage (SGEO) when there is an equipment failure
causing the ERP to be non-functional; otherwise the sescondary state is active."
::= { f3ErpGroupEntry 4 }
f3ErpGroupRapsRingId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ring ID of this ERP instance. The value is used in the destination
address of the RAPS PDU."
::= { f3ErpGroupEntry 5 }
f3ErpGroupRapsNodeId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Node ID of the local system for this ERP instance.
The value is used as the Node ID in the RAPS PDU."
::= { f3ErpGroupEntry 6 }
f3ErpGroupRapsVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VID value of the VLAN tag for transmitted/received RAPS PDUs for this
ERP instance."
::= { f3ErpGroupEntry 7 }
f3ErpGroupRapsVlanPrio OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"P-bit value of the VLAN tag for transmitted RAPS PDUs for this ERP instance."
::= { f3ErpGroupEntry 8 }
f3ErpGroupRapsVlanEtherType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VID value of the VLAN tag for transmitted/received RAPS PDUs for this
ERP instance."
::= { f3ErpGroupEntry 9 }
f3ErpGroupRapsMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MD (or MEG) level of the transmitted/received RAPS PDUs for this ERP instance."
::= { f3ErpGroupEntry 10 }
f3ErpGroupCompatibleVersion OBJECT-TYPE
SYNTAX G8032Version
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates compatability with a version of G.8032 for this ring instance."
::= { f3ErpGroupEntry 11 }
f3ErpGroupRevertive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Revertive control for the ring. Only applicable on the RPL Owner node."
::= { f3ErpGroupEntry 12 }
f3ErpGroupSubRingWithoutVirtChan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether R-APS channel forms a closed loop around the ring
ENABLED: no RAPS Virtual Channel (i.e., open ring)
DISABLED: RAPS forms a closed loop (major ring or sub-ring with virtual
channel)"
::= { f3ErpGroupEntry 13 }
f3ErpGroupGuardTime OBJECT-TYPE
SYNTAX Integer32 (10..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Guard Time value in milliseconds for this ERP instance."
::= { f3ErpGroupEntry 14 }
f3ErpGroupWaitToRestore OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Wait-to-Restore time value in minutes for this ERP instance."
::= { f3ErpGroupEntry 15 }
f3ErpGroupHoldOffTime OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Hold-off Time value in milliseconds for this ERP instance."
::= { f3ErpGroupEntry 16 }
f3ErpGroupRingPort0 OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pointer to a Port instance which represents Ring Port 0 in the ERP Group.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port
is a Network Port."
::= { f3ErpGroupEntry 17 }
f3ErpGroupRingPort0MEP OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pointer to a CFM MEP instance monitoring Ring Port 0 for this ERP instance.
The pointer must be set to dot1agCfmMepIfIndex instance."
::= { f3ErpGroupEntry 18 }
f3ErpGroupRingPort0Role OBJECT-TYPE
SYNTAX RPLRole
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RPL Role of Ring Port 0. When f3ErpGroupRingPort1Role is NEIGHBOR or OWNER,
this value MUST be NONE."
::= { f3ErpGroupEntry 19 }
f3ErpGroupRingPort1 OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pointer to a Port instance which represents Ring Port 1 in the ERP Group.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port
is a Network Port."
::= { f3ErpGroupEntry 20 }
f3ErpGroupRingPort1MEP OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pointer to a CFM MEP instance monitoring Ring Port 1 for this ERP instance.
The pointer must be set to dot1agCfmMepIfIndex instance."
::= { f3ErpGroupEntry 21 }
f3ErpGroupRingPort1Role OBJECT-TYPE
SYNTAX RPLRole
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RPL Role of Ring Port 1. When f3ErpGroupRingPort0Role is NEIGHBOR or OWNER,
this value MUST be NONE."
::= { f3ErpGroupEntry 22 }
f3ErpGroupProtectMgmtTunnel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indication of whether this ERP instance is protecting management Tunnels
on the ring ports."
::= { f3ErpGroupEntry 23 }
f3ErpGroupNodeState OBJECT-TYPE
SYNTAX RingNodeState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERP Node state."
::= { f3ErpGroupEntry 24 }
f3ErpGroupWTRRemainingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining (in seconds) for this ERP instance to wait to restore."
::= { f3ErpGroupEntry 25 }
f3ErpGroupTxRapsRequest OBJECT-TYPE
SYNTAX RAPSRequest
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Request/State field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking."
::= { f3ErpGroupEntry 26 }
f3ErpGroupTxRapsRplBlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RPL Blocked field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking."
::= { f3ErpGroupEntry 27 }
f3ErpGroupTxRapsDNF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Do Not Flush field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking."
::= { f3ErpGroupEntry 28 }
f3ErpGroupTxRapsBPR OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Blocked Port Reference field fo the last generated R-APS message on the
Ring Ports. Valid when the node is blocking."
::= { f3ErpGroupEntry 29 }
f3ErpGroupAction OBJECT-TYPE
SYNTAX ERPGroupAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User action performed on this ERP instance.
For manualSwitch and forcedSwitch actions f3ErpGroupActionObject has to
be specified prior to settng this object."
::= { f3ErpGroupEntry 30 }
f3ErpGroupActionObject OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object identfier used to specify the OID of a port on which
f3ErpGroupAction should occur. Applicable for manualSwitch and forcedSwitch
actions.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port
a Network Port."
::= { f3ErpGroupEntry 31}
f3ErpGroupUserLabel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User Label associated with the ERP Group."
::= { f3ErpGroupEntry 32 }
f3ErpGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3ErpGroupEntry 33 }
f3ErpGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3ErpGroupRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
neRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3ErpGroupRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3ErpGroupEntry 34 }
f3ErpGroupInterconnectionErp OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Oid of the associated Loop Avoidance instance at an interconnect
node. Current only ERP instances are supported for this;
in the future, STP instances may be as well."
::= { f3ErpGroupEntry 35 }
f3ErpGroupInterconnectPropagateTc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows for propgation of Topology Change information in the
protocol of the associated Loop Avoidance instance at an
interconnect node. Derived from MI_RAPS_Propagate_TC in [G8032]"
::= { f3ErpGroupEntry 36 }
f3ErpGroupRapsVirtualChannelMep OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ID of MEP monitoring an UP MEP Monitoring the R-APS VID."
::= { f3ErpGroupEntry 37 }
f3ErpGroupMaxFpNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max number of flow point which the erp supports.
This object is not supported - setting its value will
not have any effect on the System."
::= { f3ErpGroupEntry 38 }
f3ErpGroupRapsInterconnectionNode OBJECT-TYPE
SYNTAX RapsInterconnectionNode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of sub-ring interconnection node. PRIMARY/SECONDARY role
for minimizing interconnected ring segmentation."
::= { f3ErpGroupEntry 39 }
f3ErpGroupRapsMultipleFailure OBJECT-TYPE
SYNTAX RapsMultipleFailure
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-ring interconnection node that is designated to perform the Manual
Switch for minimizing interconnected ring segmentation."
::= { f3ErpGroupEntry 40 }
--
-- Ethernet Ring Protection Protected Flows
--
f3ErpGroupProtectedFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3ErpGroupProtectedFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Flows which are protected by
an ERP group instance. These flows can be access flows or multipoint
flows depending on the traffic model of the ERP Ring Port."
::= { f3ErpConfigObjects 2 }
f3ErpGroupProtectedFlowEntry OBJECT-TYPE
SYNTAX F3ErpGroupProtectedFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3ErpGroupProtectedFlowsTable."
INDEX { neIndex, f3ErpGroupIndex, f3ErpGroupProtectedFlow }
::= { f3ErpGroupProtectedFlowTable 1 }
F3ErpGroupProtectedFlowEntry ::= SEQUENCE {
f3ErpGroupProtectedFlow VariablePointer
}
f3ErpGroupProtectedFlow OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a Flow instance which is protected by an ERP instance.
The pointer must be set to cmFlowIndex or cmMPFlowIndex instance."
::= { f3ErpGroupProtectedFlowEntry 1 }
--
-- Ethernet Ring Protection Unit
--
f3ErpUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3ErpUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Ethernet Ring Protection Unit"
::= { f3ErpConfigObjects 3 }
f3ErpUnitEntry OBJECT-TYPE
SYNTAX F3ErpUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3ErpUnitTable."
INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex }
::= { f3ErpUnitTable 1 }
F3ErpUnitEntry ::= SEQUENCE {
f3ErpUnitIndex Integer32,
f3ErpUnitPort VariablePointer,
f3ErpUnitPortMEP VariablePointer,
f3ErpUnitPortRole RPLRole,
f3ErpUnitPortStatus RingPortStatus,
f3ErpUnitPortRxRapsRequest RAPSRequest,
f3ErpUnitPortRxRapsRplBlocked TruthValue,
f3ErpUnitPortRxRapsDNF TruthValue,
f3ErpUnitPortRxRapsBPR Integer32,
f3ErpUnitPortRxRapsNodeId MacAddress,
f3ErpUnitPortRapsFp VariablePointer
}
f3ErpUnitIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
this ERP Unit within ERP Group."
::= { f3ErpUnitEntry 1 }
f3ErpUnitPort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERP Unit's points to a facility (port).
This object represents the facility Network Element port."
::= { f3ErpUnitEntry 2 }
f3ErpUnitPortMEP OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a CFM MEP instance monitoring Ring Port."
::= { f3ErpUnitEntry 3 }
f3ErpUnitPortRole OBJECT-TYPE
SYNTAX RPLRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RPL Role of Ring Port 1. When f3ErpGroupRingPort2Role is NEIGHBOR or OWNER,
this value MUST be NONE."
::= { f3ErpUnitEntry 4 }
f3ErpUnitPortStatus OBJECT-TYPE
SYNTAX RingPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Ring Port."
::= { f3ErpUnitEntry 5 }
f3ErpUnitPortRxRapsRequest OBJECT-TYPE
SYNTAX RAPSRequest
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Request/State field fo the last received R-APS message on Ring Port."
::= { f3ErpUnitEntry 6 }
f3ErpUnitPortRxRapsRplBlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RPL Blocked field fo the last received R-APS message on Ring Port."
::= { f3ErpUnitEntry 7 }
f3ErpUnitPortRxRapsDNF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Do Not Flush field fo the last received R-APS message on Ring Port."
::= { f3ErpUnitEntry 8 }
f3ErpUnitPortRxRapsBPR OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Blocked Port Reference field fo the last received R-APS message on Ring Port."
::= { f3ErpUnitEntry 9 }
f3ErpUnitPortRxRapsNodeId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Node ID of the local system for this ERP instance.
The value is used as the Node ID in the RAPS PDU."
::= { f3ErpUnitEntry 10 }
f3ErpUnitPortRapsFp OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a R-APS FlowPoint associated with this Ring Port."
::= { f3ErpUnitEntry 11 }
--
-- Ethernet Ring Protection Unit Stats
--
f3ErpUnitStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3ErpUnitStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to Ethernet Ring Protection Unit Statistics"
::= { f3ErpStatsObjects 1 }
f3ErpUnitStatsEntry OBJECT-TYPE
SYNTAX F3ErpUnitStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3ErpUnitStatsTable."
INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex }
::= { f3ErpUnitStatsTable 1 }
F3ErpUnitStatsEntry ::= SEQUENCE {
f3ErpUnitNumBlockedStateTrans Unsigned32,
f3ErpUnitRapsPDUsTx Unsigned32,
f3ErpUnitRapsPDUsRx Unsigned32,
f3ErpUnitRapsPDUsDiscarded Unsigned32,
f3ErpUnitRapsNoReqPDUsTx Unsigned32,
f3ErpUnitRapsNoReqRBPDUsTx Unsigned32,
f3ErpUnitRapsSignalFailPDUsTx Unsigned32,
f3ErpUnitRapsManualSwitchPDUsTx Unsigned32,
f3ErpUnitRapsForcedSwitchPDUsTx Unsigned32,
f3ErpUnitRapsEventPDUsTx Unsigned32,
f3ErpUnitRapsNoReqPDUsRx Unsigned32,
f3ErpUnitRapsNoReqRBPDUsRx Unsigned32,
f3ErpUnitRapsSignalFailPDUsRx Unsigned32,
f3ErpUnitRapsManualSwitchPDUsRx Unsigned32,
f3ErpUnitRapsForcedSwitchPDUsRx Unsigned32,
f3ErpUnitRapsEventPDUsRx Unsigned32,
f3ErpUnitRapsInvalidOamVersionPDUsRx Unsigned32,
f3ErpUnitRapsRsvdRequestPDUsRx Unsigned32,
f3ErpUnitRapsRsvdEventSubcode Unsigned32
}
f3ErpUnitNumBlockedStateTrans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of transitions into a blocking state for Ring Port."
::= { f3ErpUnitStatsEntry 1 }
f3ErpUnitRapsPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of all RAPS PDUs transmitted on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 2 }
f3ErpUnitRapsPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of all RAPS PDUs received on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 3 }
f3ErpUnitRapsPDUsDiscarded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of all RAPS PDUs received on the port and discarded where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 4 }
f3ErpUnitRapsNoReqPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of No Request RAPS PDUs transmitted on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 5 }
f3ErpUnitRapsNoReqRBPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of No Request, RPL Blocked RAPS PDUs transmitted on the port where
the PDU contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 6 }
f3ErpUnitRapsSignalFailPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Signal Fail RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 7 }
f3ErpUnitRapsManualSwitchPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Manual Switch RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 8 }
f3ErpUnitRapsForcedSwitchPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Forced Switch RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 9 }
f3ErpUnitRapsEventPDUsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Event RAPS PDUs transmitted on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 10 }
f3ErpUnitRapsNoReqPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of No Request RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 11 }
f3ErpUnitRapsNoReqRBPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of No Request, RPL Blocked RAPS PDUs received on the port where
the PDU contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 12 }
f3ErpUnitRapsSignalFailPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Signal Fail RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 13 }
f3ErpUnitRapsManualSwitchPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Manual Switch RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 14 }
f3ErpUnitRapsForcedSwitchPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Forced Switch RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 15 }
f3ErpUnitRapsEventPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Event RAPS PDUs received on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 16 }
f3ErpUnitRapsInvalidOamVersionPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance and an OAM Version field other
than 0 or 1."
::= { f3ErpUnitStatsEntry 17 }
f3ErpUnitRapsRsvdRequestPDUsRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance."
::= { f3ErpUnitStatsEntry 18 }
f3ErpUnitRapsRsvdEventSubcode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance, an OAM Opcode field of 40 (R-APS),
a request/state value of 14 (EVT) and a sub-code value that is not 0."
::= { f3ErpUnitStatsEntry 19 }
--
-- Conformance
--
f3ErpCompliances OBJECT IDENTIFIER ::= {f3ErpConformance 1}
f3ErpGroups OBJECT IDENTIFIER ::= {f3ErpConformance 2}
f3ErpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the F3-ERP-MIB compilance."
MODULE -- this module
MANDATORY-GROUPS {
f3ErpGroupGroup, f3ErpUnitGroup, f3ErpUnitStatsGroup
}
::= { f3ErpCompliances 1 }
f3ErpGroupGroup OBJECT-GROUP
OBJECTS {
f3ErpGroupAdminState,
f3ErpGroupOperationalState,
f3ErpGroupSecondaryState,
f3ErpGroupRapsRingId,
f3ErpGroupRapsNodeId,
f3ErpGroupRapsVlanId,
f3ErpGroupRapsVlanPrio,
f3ErpGroupRapsVlanEtherType,
f3ErpGroupRapsMdLevel,
f3ErpGroupCompatibleVersion,
f3ErpGroupRevertive,
f3ErpGroupSubRingWithoutVirtChan,
f3ErpGroupGuardTime,
f3ErpGroupWaitToRestore,
f3ErpGroupHoldOffTime,
f3ErpGroupRingPort0,
f3ErpGroupRingPort0MEP,
f3ErpGroupRingPort0Role,
f3ErpGroupRingPort1,
f3ErpGroupRingPort1MEP,
f3ErpGroupRingPort1Role,
f3ErpGroupProtectMgmtTunnel,
f3ErpGroupNodeState,
f3ErpGroupWTRRemainingTime,
f3ErpGroupTxRapsRequest,
f3ErpGroupTxRapsRplBlocked,
f3ErpGroupTxRapsDNF,
f3ErpGroupTxRapsBPR,
f3ErpGroupAction,
f3ErpGroupActionObject,
f3ErpGroupUserLabel,
f3ErpGroupStorageType,
f3ErpGroupRowStatus,
f3ErpGroupProtectedFlow,
f3ErpGroupInterconnectionErp,
f3ErpGroupInterconnectPropagateTc,
f3ErpGroupRapsVirtualChannelMep,
f3ErpGroupMaxFpNum,
f3ErpGroupRapsInterconnectionNode,
f3ErpGroupRapsMultipleFailure
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the ERP Group."
::= { f3ErpGroups 1 }
f3ErpUnitGroup OBJECT-GROUP
OBJECTS {
f3ErpUnitPort,
f3ErpUnitPortMEP,
f3ErpUnitPortRole,
f3ErpUnitPortStatus,
f3ErpUnitPortRxRapsRequest,
f3ErpUnitPortRxRapsRplBlocked,
f3ErpUnitPortRxRapsDNF,
f3ErpUnitPortRxRapsBPR,
f3ErpUnitPortRxRapsNodeId,
f3ErpUnitPortRapsFp
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the ERP Unit."
::= { f3ErpGroups 2 }
f3ErpUnitStatsGroup OBJECT-GROUP
OBJECTS {
f3ErpUnitNumBlockedStateTrans,
f3ErpUnitRapsPDUsTx,
f3ErpUnitRapsPDUsRx,
f3ErpUnitRapsPDUsDiscarded,
f3ErpUnitRapsNoReqPDUsTx,
f3ErpUnitRapsNoReqRBPDUsTx,
f3ErpUnitRapsSignalFailPDUsTx,
f3ErpUnitRapsManualSwitchPDUsTx,
f3ErpUnitRapsForcedSwitchPDUsTx,
f3ErpUnitRapsEventPDUsTx,
f3ErpUnitRapsNoReqPDUsRx,
f3ErpUnitRapsNoReqRBPDUsRx,
f3ErpUnitRapsSignalFailPDUsRx,
f3ErpUnitRapsManualSwitchPDUsRx,
f3ErpUnitRapsForcedSwitchPDUsRx,
f3ErpUnitRapsEventPDUsRx,
f3ErpUnitRapsInvalidOamVersionPDUsRx,
f3ErpUnitRapsRsvdRequestPDUsRx,
f3ErpUnitRapsRsvdEventSubcode
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the ERP Unit Statistics."
::= { f3ErpGroups 3 }
END