1066 lines
31 KiB
Plaintext
1066 lines
31 KiB
Plaintext
--- ArubaOS 8.8.0.1_80393
|
|
-- vim:set ts=4 sw=4:
|
|
|
|
WLSX-IFEXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
snmpModules,
|
|
Integer32,
|
|
Counter32,
|
|
IpAddress,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
TDomain,
|
|
DisplayString,
|
|
PhysAddress,
|
|
TAddress,
|
|
TimeInterval,
|
|
RowStatus,
|
|
StorageType,
|
|
TestAndIncr,
|
|
MacAddress,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
|
|
ArubaPoeState,
|
|
ArubaDot1dState,
|
|
ArubaPortMode,
|
|
ArubaVlanValidRange,
|
|
ArubaEnableValue,
|
|
ArubaOperStateValue,
|
|
ArubaPortType,
|
|
ArubaPortDuplex,
|
|
ArubaPortSpeed,
|
|
ArubaIfType
|
|
FROM ARUBA-TC
|
|
|
|
wlsxEnterpriseMibModules
|
|
FROM ARUBA-MIB;
|
|
|
|
wlsxIfExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "202008141745Z"
|
|
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
|
|
CONTACT-INFO
|
|
"Postal: 3333 Scott Blvd,
|
|
Santa Clara, CA 95054
|
|
E-mail: aruba-ext-eng-reg@hpe.com
|
|
Phone: 408 227 4500
|
|
Fax: 408 752 0626"
|
|
DESCRIPTION
|
|
"This MIB module defines MIB objects which provide
|
|
System level information about the Aruba controller."
|
|
|
|
REVISION "202008141745Z"
|
|
DESCRIPTION
|
|
"Deprecated wlsxIfExtPortTable and added new table
|
|
wlsxIfExtNPortTable"
|
|
|
|
REVISION "1001261806Z"
|
|
DESCRIPTION
|
|
"The initial revision."
|
|
::= { wlsxEnterpriseMibModules 3 }
|
|
|
|
wlsxIfExtGroup OBJECT IDENTIFIER ::= { wlsxIfExtMIB 1 }
|
|
|
|
-- Port Table defines all the physical ports in the controller.
|
|
|
|
wlsxIfExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxIfExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The table of processors contained by the controller. This table is
|
|
deprecated in favor of wlsxIfExtNPortTable.
|
|
"
|
|
::= { wlsxIfExtGroup 1 }
|
|
|
|
wlsxIfExtPortEntry OBJECT-TYPE
|
|
SYNTAX WlsxIfExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
An entry for one processor contained by the controller.
|
|
"
|
|
INDEX {ifExtSlotNumber, ifExtPortNumber}
|
|
::= { wlsxIfExtPortTable 1 }
|
|
|
|
WlsxIfExtPortEntry ::=
|
|
SEQUENCE {
|
|
ifExtSlotNumber Integer32,
|
|
ifExtPortNumber Integer32,
|
|
ifExtPortIfIndex Integer32,
|
|
ifExtAdminState ArubaEnableValue,
|
|
ifExtOperState INTEGER,
|
|
ifExtPoeState ArubaPoeState,
|
|
ifExtIsTrusted TruthValue,
|
|
ifExtDot1DState ArubaDot1dState,
|
|
ifExtMode ArubaPortMode,
|
|
ifExtAccessVlanId ArubaVlanValidRange,
|
|
ifExtTrunkNativeVlanId ArubaVlanValidRange,
|
|
ifExtTrunkIsAllowedAll TruthValue,
|
|
ifExtTrunkAllowedVlanList OCTET STRING,
|
|
ifExtIngressACLName DisplayString,
|
|
ifExtEgressACLName DisplayString,
|
|
ifExtSessionACLName DisplayString,
|
|
ifExtXsecVlan ArubaVlanValidRange,
|
|
ifExtIsMonitoring TruthValue,
|
|
ifExtIsMux TruthValue,
|
|
ifExtUserSlotNumber Integer32,
|
|
ifExtUserPortNumber Integer32,
|
|
ifExtPortSpeed ArubaPortSpeed,
|
|
ifExtPortDuplex ArubaPortDuplex,
|
|
ifExtPortType ArubaPortType,
|
|
ifExtDescr DisplayString,
|
|
ifExtUserModuleNumber Integer32
|
|
}
|
|
|
|
ifExtSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Physical Slot of the Interface.
|
|
"
|
|
::= { wlsxIfExtPortEntry 1 }
|
|
|
|
ifExtPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Physical Port of the Interface.
|
|
"
|
|
::= { wlsxIfExtPortEntry 2 }
|
|
|
|
ifExtPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This is the ifIndex in ifTable, representing this slot and port.
|
|
This object is deprecated in favour of ifExtNPortIfIndex.
|
|
"
|
|
::= { wlsxIfExtPortEntry 3 }
|
|
|
|
ifExtAdminState OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The desired state of the interface. This object is deprecated in
|
|
favour of ifExtNAdminState.
|
|
"
|
|
::= { wlsxIfExtPortEntry 4 }
|
|
|
|
ifExtOperState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
up(1),
|
|
down(2),
|
|
testing(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The current operational state of the interface. This object is
|
|
deprecated in favour of ifExtNOperState.
|
|
"
|
|
::= { wlsxIfExtPortEntry 5 }
|
|
|
|
ifExtPoeState OBJECT-TYPE
|
|
SYNTAX ArubaPoeState
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The current state of the power over ethernet capability of the
|
|
port. This object is deprecated in favour of ifExtNPoeState.
|
|
"
|
|
::= { wlsxIfExtPortEntry 6 }
|
|
ifExtIsTrusted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The object indicates if the port is used in the trusted side of the
|
|
network or the untrusted side. This object is deprecated in favour
|
|
of ifExtNIsTrusted.
|
|
"
|
|
::= { wlsxIfExtPortEntry 7 }
|
|
|
|
ifExtDot1DState OBJECT-TYPE
|
|
SYNTAX ArubaDot1dState
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
Current Dot1d state of the Port.
|
|
This object provides default switch port value if ifExtIsMonitoring
|
|
is true(1).
|
|
This object is deprecated in favour of ifExtNDot1DState.
|
|
"
|
|
::= { wlsxIfExtPortEntry 8 }
|
|
|
|
ifExtMode OBJECT-TYPE
|
|
SYNTAX ArubaPortMode
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is in a Trunk mode or access mode.
|
|
This object provides default switch port value if ifExtIsMonitoring
|
|
is true(1).
|
|
This object is deprecated in favour of ifExtNMode.
|
|
"
|
|
::= { wlsxIfExtPortEntry 9 }
|
|
|
|
ifExtAccessVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The VLAN Id when the port is in Access Mode. This object provides
|
|
default switch port value if ifExtIsMonitoring is true(1). This object is
|
|
deprecated in favour of ifExtNAccessVlanId.
|
|
"
|
|
::= { wlsxIfExtPortEntry 10 }
|
|
|
|
ifExtTrunkNativeVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The native VLAN Id of the Port, when the port is in dot1q mode. This
|
|
object provides default switch port value if ifExtIsMonitoring is
|
|
true(1).
|
|
This object is deprecated in favour of ifExtNTrunkNativeVlanId.
|
|
"
|
|
::= { wlsxIfExtPortEntry 11 }
|
|
|
|
ifExtTrunkIsAllowedAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
When the mode of the port is Trunk, this Object indicates
|
|
if the port is part of all the configured Vlans. This object
|
|
provides default switch port value if ifExtIsMonitoring is true(1).
|
|
This object is deprecated in favour of ifExtNTrunkIsAllowedAll.
|
|
"
|
|
::= { wlsxIfExtPortEntry 12 }
|
|
|
|
ifExtTrunkAllowedVlanList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
A string of octets containing one bit per VLAN for a
|
|
total of 4096 VLANs in the management domain.
|
|
The most significant bit of the octet string is the
|
|
lowest value VLAN of 4096 VLANs.
|
|
By setting the bit(1) we indicate that the vlan is part of the
|
|
interface.
|
|
The most significant bit of the bitmap is transmitted
|
|
first. Note that if the length of this string is less than
|
|
512 octets, any 'missing' octets are assumed to contain
|
|
the value zero.
|
|
This object provides default switch port value if
|
|
ifExtIsMonitoring is true(1).
|
|
This object is deprecated in favour of
|
|
ifExtNTrunkAllowedVlanList.
|
|
"
|
|
::= { wlsxIfExtPortEntry 13 }
|
|
|
|
ifExtIngressACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Ingress ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port. This object is deprecated in favour of ifExtNIngressACLName.
|
|
"
|
|
::= { wlsxIfExtPortEntry 14 }
|
|
|
|
ifExtEgressACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Egress ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port. This object is deprecated in favour of ifExtNEgressACLName.
|
|
"
|
|
::= { wlsxIfExtPortEntry 15 }
|
|
|
|
ifExtSessionACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Session ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port. This object is deprecated in favour of ifExtNEgressACLName.
|
|
"
|
|
::= { wlsxIfExtPortEntry 16 }
|
|
|
|
ifExtXsecVlan OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is an Xsec Port. This object is
|
|
deprecated in favour of ifExtNXsecVlan.
|
|
"
|
|
::= { wlsxIfExtPortEntry 17 }
|
|
|
|
ifExtIsMonitoring OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is used for Port monitoring.
|
|
When the value of this object is true(1), then below objects provide
|
|
default switch port values configured on this port.
|
|
ifExtMode,
|
|
ifExtAccessVlanId,
|
|
ifExtTrunkNativeVlanId,
|
|
ifExtTrunkIsAllowedAll,
|
|
ifExtTrunkAllowedVlanList
|
|
This object is deprecated in favour of ifExtNIsMonitoring.
|
|
"
|
|
::= { wlsxIfExtPortEntry 18 }
|
|
|
|
ifExtIsMux OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is used as a MUX Port. This object
|
|
is deprecated in favour of ifExtNIsMux.
|
|
"
|
|
::= { wlsxIfExtPortEntry 19 }
|
|
|
|
ifExtUserSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The user-visible (zero-based) slot number.
|
|
"
|
|
::= { wlsxIfExtPortEntry 20 }
|
|
|
|
ifExtUserPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The user-visible (zero-based) port number.
|
|
"
|
|
::= { wlsxIfExtPortEntry 21 }
|
|
|
|
ifExtPortSpeed OBJECT-TYPE
|
|
SYNTAX ArubaPortSpeed
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
Speed of the Port. This object is deprecated in favour of
|
|
ifExtNPortSpeed.
|
|
"
|
|
::= { wlsxIfExtPortEntry 22 }
|
|
|
|
ifExtPortDuplex OBJECT-TYPE
|
|
SYNTAX ArubaPortDuplex
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
Duplexity of the Port. This object is deprecated in favour of
|
|
ifExtNPortDuplex.
|
|
"
|
|
::= { wlsxIfExtPortEntry 23 }
|
|
|
|
ifExtPortType OBJECT-TYPE
|
|
SYNTAX ArubaPortType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
Type of the Port. This object is deprecated in favour of
|
|
ifExtNPortType.
|
|
"
|
|
::= { wlsxIfExtPortEntry 24 }
|
|
|
|
ifExtDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
Port Description. This object is deprecated in favour of
|
|
ifExtNDescr.
|
|
"
|
|
::= { wlsxIfExtPortEntry 25 }
|
|
|
|
ifExtUserModuleNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
The user-visible (zero-based) module number.
|
|
"
|
|
::= { wlsxIfExtPortEntry 26 }
|
|
|
|
|
|
-- VLAN Table defines all the VLAN in the controller.
|
|
|
|
wlsxIfExtVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxIfExtVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { wlsxIfExtGroup 2 }
|
|
|
|
wlsxIfExtVlanEntry OBJECT-TYPE
|
|
SYNTAX WlsxIfExtVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry for one processor contained by the controller.
|
|
"
|
|
INDEX {ifExtVlanId}
|
|
::= { wlsxIfExtVlanTable 1 }
|
|
|
|
WlsxIfExtVlanEntry ::=
|
|
SEQUENCE {
|
|
ifExtVlanId ArubaVlanValidRange,
|
|
ifExtVlanName DisplayString,
|
|
ifExtVlanStatus RowStatus
|
|
}
|
|
|
|
ifExtVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the VLAN Id of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanEntry 1 }
|
|
|
|
ifExtVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Name of the VLAN.
|
|
"
|
|
::= { wlsxIfExtVlanEntry 2 }
|
|
|
|
ifExtVlanStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Row status Object used to create/modify the row.
|
|
"
|
|
::= { wlsxIfExtVlanEntry 3 }
|
|
|
|
-- VLAN Port Member Table defines port membership in the vlan.
|
|
|
|
wlsxIfExtVlanMemberTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxIfExtVlanMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { wlsxIfExtGroup 3 }
|
|
|
|
wlsxIfExtVlanMemberEntry OBJECT-TYPE
|
|
SYNTAX WlsxIfExtVlanMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry for one processor contained by the controller.
|
|
"
|
|
INDEX {ifExtVlanId, ifIndex}
|
|
::= { wlsxIfExtVlanMemberTable 1 }
|
|
|
|
WlsxIfExtVlanMemberEntry ::=
|
|
SEQUENCE {
|
|
ifExtVlanMemberStatus RowStatus,
|
|
ifExtVlanMemberSlot Integer32,
|
|
ifExtVlanMemberPort Integer32,
|
|
ifExtVlanMemberType ArubaIfType
|
|
}
|
|
|
|
ifExtVlanMemberStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Row status Object used to create/modify and indicate the
|
|
status row.
|
|
"
|
|
::= { wlsxIfExtVlanMemberEntry 1 }
|
|
|
|
ifExtVlanMemberSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The slot index of the slot referred to by this row (1-based).
|
|
"
|
|
::= { wlsxIfExtVlanMemberEntry 2 }
|
|
|
|
ifExtVlanMemberPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The slot index of the slot referred to by this row (1-based).
|
|
"
|
|
::= { wlsxIfExtVlanMemberEntry 3 }
|
|
|
|
ifExtVlanMemberType OBJECT-TYPE
|
|
SYNTAX ArubaIfType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The VLAN member type.
|
|
"
|
|
::= { wlsxIfExtVlanMemberEntry 4 }
|
|
|
|
-- VLAN Interface Table defines Layer3 VLAN Interfaces.
|
|
|
|
wlsxIfExtVlanInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxIfExtVlanInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { wlsxIfExtGroup 4 }
|
|
|
|
wlsxIfExtVlanInterfaceEntry OBJECT-TYPE
|
|
SYNTAX WlsxIfExtVlanInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry for one processor contained by the controller.
|
|
"
|
|
INDEX {ifExtVlanId}
|
|
::= { wlsxIfExtVlanInterfaceTable 1 }
|
|
|
|
WlsxIfExtVlanInterfaceEntry ::=
|
|
SEQUENCE {
|
|
ifExtVlanInterfaceIfIndex Integer32,
|
|
ifExtVlanInterfaceDescription DisplayString,
|
|
ifExtVlanInterfaceBWContract DisplayString,
|
|
ifExtVlanInterfaceAdminState ArubaEnableValue,
|
|
ifExtVlanInterfaceOperState ArubaOperStateValue,
|
|
ifExtVlanInterfaceIpAddress IpAddress,
|
|
ifExtVlanInterfaceIpMask IpAddress,
|
|
ifExtVlanInterfaceIsLocalArp ArubaEnableValue,
|
|
ifExtVlanInterfaceStatus RowStatus,
|
|
ifExtVlanInterfaceIpRouting ArubaEnableValue,
|
|
ifExtVlanInterfaceIpNatInside ArubaEnableValue,
|
|
ifExtVlanInterfaceIpIgmpSnooping ArubaEnableValue
|
|
|
|
}
|
|
|
|
ifExtVlanInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the ifIndex in ifTable, representing VLAN Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 1 }
|
|
|
|
ifExtVlanInterfaceDescription OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the description of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 2 }
|
|
|
|
ifExtVlanInterfaceBWContract OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the Bandwidth contract on the interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 3 }
|
|
|
|
ifExtVlanInterfaceAdminState OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the administrative state of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 4 }
|
|
|
|
ifExtVlanInterfaceOperState OBJECT-TYPE
|
|
SYNTAX ArubaOperStateValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the operational state of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 5 }
|
|
|
|
ifExtVlanInterfaceIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the IP Address of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 6 }
|
|
|
|
|
|
ifExtVlanInterfaceIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates the subnet mask of the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 7 }
|
|
|
|
ifExtVlanInterfaceIsLocalArp OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates if the Local Arp is set on the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 8 }
|
|
|
|
ifExtVlanInterfaceStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A Row status Object used to create/modify and indicate the
|
|
status row.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 9}
|
|
|
|
ifExtVlanInterfaceIpRouting OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates if the IP routing is set on the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 10 }
|
|
|
|
ifExtVlanInterfaceIpNatInside OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates if the IP nat inside is set on the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 11 }
|
|
|
|
ifExtVlanInterfaceIpIgmpSnooping OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This Object indicates if the IP IGMP snooping is set on the Interface.
|
|
"
|
|
::= { wlsxIfExtVlanInterfaceEntry 12 }
|
|
|
|
wlsxIfExtNPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlsxIfExtNPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The table of interface details.
|
|
"
|
|
::= { wlsxIfExtGroup 5 }
|
|
|
|
wlsxIfExtNPortEntry OBJECT-TYPE
|
|
SYNTAX WlsxIfExtNPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
An entry in wlsxIfExtNPortTable.
|
|
"
|
|
INDEX { ifExtNSlotNumber, ifExtNModuleNumber, ifExtNPortNumber }
|
|
::= { wlsxIfExtNPortTable 1 }
|
|
|
|
WlsxIfExtNPortEntry ::=
|
|
SEQUENCE {
|
|
ifExtNSlotNumber Integer32,
|
|
ifExtNModuleNumber Integer32,
|
|
ifExtNPortNumber Integer32,
|
|
ifExtNPortIfIndex Integer32,
|
|
ifExtNAdminState ArubaEnableValue,
|
|
ifExtNOperState INTEGER,
|
|
ifExtNPoeState ArubaPoeState,
|
|
ifExtNIsTrusted TruthValue,
|
|
ifExtNDot1DState ArubaDot1dState,
|
|
ifExtNMode ArubaPortMode,
|
|
ifExtNAccessVlanId ArubaVlanValidRange,
|
|
ifExtNTrunkNativeVlanId ArubaVlanValidRange,
|
|
ifExtNTrunkIsAllowedAll TruthValue,
|
|
ifExtNTrunkAllowedVlanList OCTET STRING,
|
|
ifExtNIngressACLName DisplayString,
|
|
ifExtNEgressACLName DisplayString,
|
|
ifExtNSessionACLName DisplayString,
|
|
ifExtNXsecVlan ArubaVlanValidRange,
|
|
ifExtNIsMonitoring TruthValue,
|
|
ifExtNIsMux TruthValue,
|
|
ifExtNPortSpeed ArubaPortSpeed,
|
|
ifExtNPortDuplex ArubaPortDuplex,
|
|
ifExtNPortType ArubaPortType,
|
|
ifExtNDescr DisplayString
|
|
}
|
|
|
|
ifExtNSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the user-visible (zero-based) Physical Slot of the Interface.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 1 }
|
|
|
|
ifExtNModuleNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the user-visible (zero-based) Physical Module of the Interface.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 2 }
|
|
|
|
ifExtNPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the user-visible (zero-based) Physical Port of the Interface.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 3 }
|
|
|
|
ifExtNPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the ifIndex in ifTable, representing this slot, module and port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 4 }
|
|
|
|
ifExtNAdminState OBJECT-TYPE
|
|
SYNTAX ArubaEnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The desired state of the interface.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 5 }
|
|
|
|
ifExtNOperState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
up(1),
|
|
down(2),
|
|
testing(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The current operational state of the interface.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 6 }
|
|
|
|
ifExtNPoeState OBJECT-TYPE
|
|
SYNTAX ArubaPoeState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The current state of the power over ethernet capability of the
|
|
port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 7 }
|
|
|
|
ifExtNIsTrusted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The object indicates if the port is used in the trusted side of the
|
|
network or the untrusted side.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 8 }
|
|
|
|
ifExtNDot1DState OBJECT-TYPE
|
|
SYNTAX ArubaDot1dState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Current Dot1d state of the Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 9 }
|
|
|
|
ifExtNMode OBJECT-TYPE
|
|
SYNTAX ArubaPortMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is in a Trunk mode or access mode.
|
|
This object provides default switch port value if ifExtIsMonitoring
|
|
is true(1).
|
|
"
|
|
::= { wlsxIfExtNPortEntry 10 }
|
|
|
|
ifExtNAccessVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The VLAN Id when the port is in Access Mode. This object provides
|
|
default switch port value if ifExtIsMonitoring is true(1).
|
|
"
|
|
::= { wlsxIfExtNPortEntry 11 }
|
|
|
|
ifExtNTrunkNativeVlanId OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The native VLAN Id of the Port, when the port is in dot1q mode.
|
|
This object provides default switch port value if ifExtIsMonitoring
|
|
is true(1).
|
|
"
|
|
::= { wlsxIfExtNPortEntry 12 }
|
|
|
|
ifExtNTrunkIsAllowedAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When the mode of the port is Trunk, this Object indicates
|
|
if the port is part of all the configured Vlans.
|
|
This object provides default switch port value if ifExtIsMonitoring
|
|
is true(1).
|
|
"
|
|
::= { wlsxIfExtNPortEntry 13 }
|
|
|
|
ifExtNTrunkAllowedVlanList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A string of octets containing one bit per VLAN for a
|
|
total of 4096 VLANs in the management domain.
|
|
The most significant bit of the octet string is the
|
|
lowest value VLAN of 4096 VLANs.
|
|
By setting the bit(1) we indicate that the vlan is part of the
|
|
interface.
|
|
The most significant bit of the bitmap is transmitted
|
|
first. Note that if the length of this string is less than
|
|
512 octets, any 'missing' octets are assumed to contain
|
|
the value zero.
|
|
This object provides default switch port value if
|
|
ifExtIsMonitoring is true(1).
|
|
"
|
|
::= { wlsxIfExtNPortEntry 14 }
|
|
|
|
ifExtNIngressACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Ingress ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 15 }
|
|
|
|
ifExtNEgressACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Egress ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 16 }
|
|
|
|
ifExtNSessionACLName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object represents the Session ACL name applied to the port.
|
|
An Empty string indicates that there is not ACL applied on this
|
|
port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 17 }
|
|
|
|
ifExtNXsecVlan OBJECT-TYPE
|
|
SYNTAX ArubaVlanValidRange
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is an Xsec Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 18 }
|
|
|
|
ifExtNIsMonitoring OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is used for Port monitoring.
|
|
When the value of this object is true(1), then below objects provide
|
|
default switch port values configured on this port.
|
|
ifExtNMode,
|
|
ifExtNAccessVlanId,
|
|
ifExtNTrunkNativeVlanId,
|
|
ifExtNTrunkIsAllowedAll,
|
|
ifExtNTrunkAllowedVlanList
|
|
"
|
|
::= { wlsxIfExtNPortEntry 19 }
|
|
|
|
ifExtNIsMux OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object indicates if the port is used as a MUX Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 20 }
|
|
|
|
ifExtNPortSpeed OBJECT-TYPE
|
|
SYNTAX ArubaPortSpeed
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Speed of the Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 21 }
|
|
|
|
ifExtNPortDuplex OBJECT-TYPE
|
|
SYNTAX ArubaPortDuplex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Duplexity of the Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 22 }
|
|
|
|
ifExtNPortType OBJECT-TYPE
|
|
SYNTAX ArubaPortType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Type of the Port.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 23 }
|
|
|
|
ifExtNDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Port Description.
|
|
"
|
|
::= { wlsxIfExtNPortEntry 24 }
|
|
|
|
END
|
|
|