mibs/MIBS/arubaos/WLSX-MON-MIB
2023-12-05 12:25:34 +01:00

2960 lines
86 KiB
Plaintext

--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
WLSX-MON-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
MacAddress,
TruthValue
FROM SNMPv2-TC
ArubaEnableValue,
ArubaFrameType,
ArubaRogueApType,
ArubaStationType,
ArubaPhyType,
ArubaAPMatchType,
ArubaAPMatchMethod,
ArubaHTMode,
ArubaHTRate,
ArubaMonEncryptionType,
ArubaMonEncryptionCipher,
ArubaMonAuthAlgorithm
FROM ARUBA-TC
OBJECT-GROUP
FROM SNMPv2-CONF
wlsxEnterpriseMibModules
FROM ARUBA-MIB;
wlsxMonMIB MODULE-IDENTITY
LAST-UPDATED "202008141745Z"
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
CONTACT-INFO
"Postal: 3333 Scott Blvd,
Santa Clara, CA 95054
E-mail: aruba-ext-eng-reg@hpe.com
Phone: 408 227 4500
Fax: 408 752 0626"
DESCRIPTION
"
This MIB module defines MIB objects which provide
information about the Monitored Access Points.
"
REVISION "202008141745Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 6 }
wlsxMonStatsGroup OBJECT IDENTIFIER ::= { wlsxMonMIB 6 }
wlsxMonInfoGroup OBJECT IDENTIFIER ::= { wlsxMonMIB 7 }
wlsxMonAccessPointStatsGroup OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 1 }
wlsxMonStationStatsGroup OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 2 }
-- Stats group contains tables for station statistics, channel statistics and
-- AP statistics.
wlsxMonAPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists the statistics of all the APs being monitored
by the controller.
"
::= { wlsxMonAccessPointStatsGroup 1 }
wlsxMonAPStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Monitored Access Point Stats entry"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPStatsTable 1 }
WlsxMonAPStatsEntry ::=
SEQUENCE {
monPhyAddress MacAddress,
monRadioNumber Integer32,
monitoredApBSSID MacAddress,
monPhyType ArubaPhyType,
monAPCurrentChannel Unsigned32,
monAPNumClients Integer32,
monAPTxPkts Counter32,
monAPTxBytes Counter32,
monAPRxPkts Counter32,
monAPRxBytes Counter32,
monAPTxDeauthentications Counter32,
monAPRxDeauthentications Counter32,
monAPChannelThroughput Integer32,
monAPFrameRetryRate Integer32,
monAPFrameLowSpeedRate Integer32,
monAPFrameNonUnicastRate Integer32,
monAPFrameFragmentationRate Integer32,
monAPFrameBandwidthRate Integer32,
monAPFrameRetryErrorRate Integer32,
monAPChannelErrorRate Integer32,
monAPESSID DisplayString,
monAPRSSI Integer32,
monAPFrameReceiveErrorRate Integer32
}
monPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
MAC address of the air monitor that is monitoring the AP.
"
::= { wlsxMonAPStatsEntry 1}
monRadioNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Radio number of the air monitor that is monitoring the AP.
"
::= { wlsxMonAPStatsEntry 2 }
monitoredApBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
BSSID of the access point being monitored.
"
::= { wlsxMonAPStatsEntry 3}
monPhyType OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PHY type of the access point being monitored.
"
::= { wlsxMonAPStatsEntry 4 }
monAPCurrentChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Channel the monitored AP is using.
"
::= { wlsxMonAPStatsEntry 5 }
monAPNumClients OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Number of clients associated to this monitored AP.
"
::= { wlsxMonAPStatsEntry 6 }
monAPTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of packets transmitted by this monitored AP.
"
::= { wlsxMonAPStatsEntry 7 }
monAPTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of bytes transmitted by this monitored AP.
"
::= { wlsxMonAPStatsEntry 8 }
monAPRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of packets received by this monitored AP.
"
::= { wlsxMonAPStatsEntry 9 }
monAPRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of bytes received by this monitored AP.
"
::= { wlsxMonAPStatsEntry 10 }
monAPTxDeauthentications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of deauthentications transmitted by this monitored AP.
"
::= { wlsxMonAPStatsEntry 11 }
monAPRxDeauthentications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of deauthentications received by this monitored AP.
"
::= { wlsxMonAPStatsEntry 12 }
monAPChannelThroughput OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The throughput achieved on this channel by this monitored AP.
"
::= { wlsxMonAPStatsEntry 13 }
monAPFrameRetryRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of retry
packets as a percentage of the total packets
transmitted and received by this monitored AP
"
::= { wlsxMonAPStatsEntry 14 }
monAPFrameLowSpeedRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
for B band) packets as a percentage of the total packets
transmitted and received by this monitored AP
"
::= { wlsxMonAPStatsEntry 15 }
monAPFrameNonUnicastRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The multicast rate on this monitored AP.
"
::= { wlsxMonAPStatsEntry 16 }
monAPFrameFragmentationRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of fragments
as a percentage of the total packets
transmitted by this monitored AP.
"
::= { wlsxMonAPStatsEntry 17 }
monAPFrameBandwidthRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The bandwidth of this monitored AP in Kbps.
"
::= { wlsxMonAPStatsEntry 18 }
monAPFrameRetryErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
The number of error packets
as a percentage of the total packets
received on this monitored AP.
"
::= { wlsxMonAPStatsEntry 19 }
monAPChannelErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of error packets
as a percentage of the total packets received
on the current channel.
"
::= { wlsxMonAPStatsEntry 20 }
monAPESSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the access point being monitored.
"
::= { wlsxMonAPStatsEntry 21 }
monAPRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR of the access point being monitored.
"
::= { wlsxMonAPStatsEntry 22 }
monAPFrameReceiveErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of error packets
as a percentage of the total packets
received on this monitored AP.
"
::= { wlsxMonAPStatsEntry 23 }
-- This table breaks down the AP statistics observed into different
-- rate categories.
wlsxMonAPRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the monitored AP Packet and Byte Counts
but represented in terms of rate categories.
"
::= { wlsxMonAccessPointStatsGroup 2 }
wlsxMonAPRateStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data rate based packet and byte count entry for a monitored AP"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPRateStatsTable 1 }
WlsxMonAPRateStatsEntry ::=
SEQUENCE {
monAPStatsTotPktsAt1Mbps Counter32,
monAPStatsTotBytesAt1Mbps Counter32,
monAPStatsTotPktsAt2Mbps Counter32,
monAPStatsTotBytesAt2Mbps Counter32,
monAPStatsTotPktsAt5Mbps Counter32,
monAPStatsTotBytesAt5Mbps Counter32,
monAPStatsTotPktsAt11Mbps Counter32,
monAPStatsTotBytesAt11Mbps Counter32,
monAPStatsTotPktsAt6Mbps Counter32,
monAPStatsTotBytesAt6Mbps Counter32,
monAPStatsTotPktsAt12Mbps Counter32,
monAPStatsTotBytesAt12Mbps Counter32,
monAPStatsTotPktsAt18Mbps Counter32,
monAPStatsTotBytesAt18Mbps Counter32,
monAPStatsTotPktsAt24Mbps Counter32,
monAPStatsTotBytesAt24Mbps Counter32,
monAPStatsTotPktsAt36Mbps Counter32,
monAPStatsTotBytesAt36Mbps Counter32,
monAPStatsTotPktsAt48Mbps Counter32,
monAPStatsTotBytesAt48Mbps Counter32,
monAPStatsTotPktsAt54Mbps Counter32,
monAPStatsTotBytesAt54Mbps Counter32,
monAPStatsTotPktsAt9Mbps Counter32,
monAPStatsTotBytesAt9Mbps Counter32
}
monAPStatsTotPktsAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 1Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 1 }
monAPStatsTotBytesAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 1Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 2 }
monAPStatsTotPktsAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 2Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 3 }
monAPStatsTotBytesAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 2Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 4 }
monAPStatsTotPktsAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 5Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 5 }
monAPStatsTotBytesAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 5Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 6 }
monAPStatsTotPktsAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 11Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 7 }
monAPStatsTotBytesAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 11Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 8 }
monAPStatsTotPktsAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 6Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 9 }
monAPStatsTotBytesAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 6Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 10 }
monAPStatsTotPktsAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 12Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 11 }
monAPStatsTotBytesAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 12Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 12 }
monAPStatsTotPktsAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 18Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 13 }
monAPStatsTotBytesAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 18Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 14 }
monAPStatsTotPktsAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 24Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 15 }
monAPStatsTotBytesAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 24Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 16 }
monAPStatsTotPktsAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 36Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 17 }
monAPStatsTotBytesAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 36Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 18 }
monAPStatsTotPktsAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 48Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 19 }
monAPStatsTotBytesAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 48Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 20 }
monAPStatsTotPktsAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 54Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 21 }
monAPStatsTotBytesAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 54Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 22 }
monAPStatsTotPktsAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets observed
from this BSSID at 9Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 23 }
monAPStatsTotBytesAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Bytes observed
from this BSSID at 9Mbps rate.
"
::= { wlsxMonAPRateStatsEntry 24 }
-- This table breaks down the channel statistics observed based on the
-- Destination Address Types.
wlsxMonAPDATypeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPDATypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the per BSSID Packet and Byte Counts
but broken down in terms of Destination Address Type.
"
::= { wlsxMonAccessPointStatsGroup 3 }
wlsxMonAPDATypeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPDATypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Destination Address based packet and byte count entry for a
monitored AP
"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPDATypeStatsTable 1 }
WlsxMonAPDATypeStatsEntry ::=
SEQUENCE {
monAPStatsTotDABroadcastPkts Counter32 ,
monAPStatsTotDABroadcastBytes Counter32 ,
monAPStatsTotDAMulticastPkts Counter32 ,
monAPStatsTotDAMulticastBytes Counter32 ,
monAPStatsTotDAUnicastPkts Counter32 ,
monAPStatsTotDAUnicastBytes Counter32
}
monAPStatsTotDABroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Broadcast packets
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 1 }
monAPStatsTotDABroadcastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Broadcast Bytes
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 2 }
monAPStatsTotDAMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Multicast packets
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 3 }
monAPStatsTotDAMulticastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Multicast Bytes
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 4 }
monAPStatsTotDAUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Unicast packets
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 5 }
monAPStatsTotDAUnicastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Unicast Bytes
observed from this BSSID.
"
::= { wlsxMonAPDATypeStatsEntry 6 }
-- This table breaks down the channel statistics observed based on the
-- the Type of the Packet.
wlsxMonAPFrameTypeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPFrameTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the per BSSID Packet and Byte Counts
but broken down into different Frame Types.
"
::= { wlsxMonAccessPointStatsGroup 4 }
wlsxMonAPFrameTypeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPFrameTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frame Type based packet and byte count entry for a monitored AP"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPFrameTypeStatsTable 1 }
WlsxMonAPFrameTypeStatsEntry ::=
SEQUENCE {
monAPStatsTotMgmtPkts Counter32 ,
monAPStatsTotMgmtBytes Counter32 ,
monAPStatsTotCtrlPkts Counter32 ,
monAPStatsTotCtrlBytes Counter32 ,
monAPStatsTotDataPkts Counter32 ,
monAPStatsTotDataBytes Counter32
}
monAPStatsTotMgmtPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Management packets
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 1 }
monAPStatsTotMgmtBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Management Bytes
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 2 }
monAPStatsTotCtrlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Control packets
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 3 }
monAPStatsTotCtrlBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Control Bytes
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 4 }
monAPStatsTotDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Data packets
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 5 }
monAPStatsTotDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of Data Bytes
observed from this BSSID.
"
::= { wlsxMonAPFrameTypeStatsEntry 6 }
-- This table breaks down the channel statistics observed into packet size
-- buckets.
wlsxMonAPPktSizeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPPktSizeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the per BSSID Packet and Byte Counts
but broken down into different Packet Sizes.
"
::= { wlsxMonAccessPointStatsGroup 5 }
wlsxMonAPPktSizeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPPktSizeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet Size based packet count entry for a BSSID"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPPktSizeStatsTable 1 }
WlsxMonAPPktSizeStatsEntry ::=
SEQUENCE {
monAPStatsPkts63Bytes Counter32 ,
monAPStatsPkts64To127 Counter32 ,
monAPStatsPkts128To255 Counter32 ,
monAPStatsPkts256To511 Counter32 ,
monAPStatsPkts512To1023 Counter32 ,
monAPStatsPkts1024To1518 Counter32
}
monAPStatsPkts63Bytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets transmitted
by the AP that were less than 64 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 1 }
monAPStatsPkts64To127 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets transmitted
by the AP that were between 64 and 127 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 2 }
monAPStatsPkts128To255 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets
transmitted by the AP that were between 128 and 255 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 3 }
monAPStatsPkts256To511 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets transmitted
by the AP that were between 256 and 511 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 4 }
monAPStatsPkts512To1023 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets transmitted
by the AP that were between 512 and 1023 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 5 }
monAPStatsPkts1024To1518 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total number of packets transmitted
by the AP that were between 1024 and 1518 bytes long.
"
::= { wlsxMonAPPktSizeStatsEntry 6 }
-- This table breaks down the AP statistics observed into different
-- HT rate categories.
wlsxMonAPHTRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPHTRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the monitored AP Packet and Byte Counts
but represented in terms of HT rate categories.
"
::= { wlsxMonAccessPointStatsGroup 6 }
wlsxMonAPHTRateStatsEntry OBJECT-TYPE
SYNTAX WlsxMonAPHTRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data rate based packet and byte count entry for a monitored AP"
INDEX { monPhyAddress, monRadioNumber, monitoredApBSSID, monHTRate }
::= { wlsxMonAPHTRateStatsTable 1 }
WlsxMonAPHTRateStatsEntry ::=
SEQUENCE {
monHTRate ArubaHTRate,
monAPStatsTotHTPkts Counter32,
monAPStatsTotHTBytes Counter32
}
monHTRate OBJECT-TYPE
SYNTAX ArubaHTRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The rate at which the counters apply
"
::= { wlsxMonAPHTRateStatsEntry 1 }
monAPStatsTotHTPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets processed at the indicated rate
"
::= { wlsxMonAPHTRateStatsEntry 2 }
monAPStatsTotHTBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of bytes processed at the indicated rate
"
::= { wlsxMonAPHTRateStatsEntry 3 }
-- wlsxMonStationStatsGroup contains all the statistics observed by different
-- Air Monitors attached to this controller.
-- Station Statatistics are observed by the Air Monitor for that
-- specific Station.
-- Station Statistics are grouped into Generic,
-- Rate, Destination Address and Frame Type Stats.
-- Station Statistics Group contains all the statistics related to
-- a Station.
-- wlsxMonStationStatsTable will contain all the Agregate statistics collected
-- for a Station
wlsxMonStationStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonStationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists the statistics of all the wireless stations being monitored
by an AP connected to this controller.
"
::= { wlsxMonStationStatsGroup 1}
wlsxMonStationStatsEntry OBJECT-TYPE
SYNTAX MonStationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Monitored Station Stats Entry"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStationStatsTable 1 }
MonStationStatsEntry ::=
SEQUENCE {
monitoredStaPhyAddress MacAddress,
monStaChannelNum Unsigned32,
monStaTxPkts Counter32,
monStaTxBytes Counter32,
monStaRxPkts Counter32,
monStaRxBytes Counter32,
monStaTxBCastPkts Counter32,
monStaTxBCastBytes Counter32,
monStaTxMCastPkts Counter32,
monStaTxMCastBytes Counter32,
monStaDataPkts Counter32,
monStaCtrlPkts Counter32,
monStaNumAssocRequests Counter32,
monStaNumAuthRequests Counter32,
monStaTxDeauthentications Counter32,
monStaRxDeauthentications Counter32,
monStaFrameRetryRate Integer32,
monStaFrameLowSpeedRate Integer32,
monStaFrameNonUnicastRate Integer32,
monStaFrameFragmentationRate Integer32,
monStaFrameBandwidthRate Integer32,
monStaFrameRetryErrorRate Integer32,
monStaBSSID MacAddress,
monStaESSID DisplayString,
monStaPhyType ArubaPhyType,
monStaRSSI Integer32,
monStaFrameReceiveErrorRate Integer32
}
monitoredStaPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
MAC address of the monitored station
"
::= { wlsxMonStationStatsEntry 1}
monStaChannelNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The channel the station is currently using.
"
::= { wlsxMonStationStatsEntry 2 }
monStaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of packets transmitted by this station.
"
::= { wlsxMonStationStatsEntry 3 }
monStaTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of bytes transmitted by this station.
"
::= { wlsxMonStationStatsEntry 4 }
monStaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of packets received by this station.
"
::= { wlsxMonStationStatsEntry 5 }
monStaRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of bytes received by this station.
"
::= { wlsxMonStationStatsEntry 6 }
monStaTxBCastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of broadcast packets transmitted by this station.
"
::= { wlsxMonStationStatsEntry 7 }
monStaTxBCastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of broadcast bytes transmitted by this station.
"
::= { wlsxMonStationStatsEntry 8 }
monStaTxMCastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of multicast packets transmitted by this station.
"
::= { wlsxMonStationStatsEntry 9 }
monStaTxMCastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of multicast bytes transmitted by this station.
"
::= { wlsxMonStationStatsEntry 10 }
monStaDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Data packets transmitted by this station.
"
::= { wlsxMonStationStatsEntry 11 }
monStaCtrlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Control packets transmitted by this station.
"
::= { wlsxMonStationStatsEntry 12 }
monStaNumAssocRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of Association requests transmitted by this station.
"
::= { wlsxMonStationStatsEntry 13 }
monStaNumAuthRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of Authentication requests transmitted by this station
"
::= { wlsxMonStationStatsEntry 14 }
monStaTxDeauthentications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of Deauthentication frames transmitted by this station.
"
::= { wlsxMonStationStatsEntry 15 }
monStaRxDeauthentications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of Deauthentication frames received by this station.
"
::= { wlsxMonStationStatsEntry 16 }
monStaFrameRetryRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of retry
packets as a percentage of the total packets
transmitted and received by this station.
"
::= { wlsxMonStationStatsEntry 17 }
monStaFrameLowSpeedRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
for B band) packets as a percentage of the total packets
transmitted and received by this station.
"
::= { wlsxMonStationStatsEntry 18 }
monStaFrameNonUnicastRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of broadcast and multicast
packets as a percentage of the total packets
transmitted by this station.
"
::= { wlsxMonStationStatsEntry 19 }
monStaFrameFragmentationRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of fragments
as a percentage of the total packets
transmitted by this station.
"
::= { wlsxMonStationStatsEntry 20 }
monStaFrameBandwidthRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The bandwidth of this station in Kbps.
"
::= { wlsxMonStationStatsEntry 21 }
monStaFrameRetryErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
The number of error packets
as a percentage of the total packets
received by this station.
"
::= { wlsxMonStationStatsEntry 22 }
monStaBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
BSSID of the station being monitored.
"
::= { wlsxMonStationStatsEntry 23 }
monStaESSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the station being monitored.
"
::= { wlsxMonStationStatsEntry 24 }
monStaPhyType OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PHY type of the station being monitored.
"
::= { wlsxMonStationStatsEntry 25 }
monStaRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR of the station being monitored.
"
::= { wlsxMonStationStatsEntry 26 }
monStaFrameReceiveErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of error packets
as a percentage of the total packets
received by this station.
"
::= { wlsxMonStationStatsEntry 27 }
-- This table breaks down the Station statistics into different
-- rate categories.
wlsxMonStaRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonStaRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the Packet and Byte Counts for a monitored station
represented in terms of rate categories.
"
::= { wlsxMonStationStatsGroup 2}
wlsxMonStaRateStatsEntry OBJECT-TYPE
SYNTAX WlsxMonStaRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data rate based packet and byte count entry for a monitored station"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStaRateStatsTable 1 }
WlsxMonStaRateStatsEntry ::=
SEQUENCE {
monStaTxPktsAt1Mbps Counter32,
monStaTxBytesAt1Mbps Counter32,
monStaTxPktsAt2Mbps Counter32,
monStaTxBytesAt2Mbps Counter32,
monStaTxPktsAt5Mbps Counter32,
monStaTxBytesAt5Mbps Counter32,
monStaTxPktsAt11Mbps Counter32,
monStaTxBytesAt11Mbps Counter32,
monStaTxPktsAt6Mbps Counter32,
monStaTxBytesAt6Mbps Counter32,
monStaTxPktsAt12Mbps Counter32,
monStaTxBytesAt12Mbps Counter32,
monStaTxPktsAt18Mbps Counter32,
monStaTxBytesAt18Mbps Counter32,
monStaTxPktsAt24Mbps Counter32,
monStaTxBytesAt24Mbps Counter32,
monStaTxPktsAt36Mbps Counter32,
monStaTxBytesAt36Mbps Counter32,
monStaTxPktsAt48Mbps Counter32,
monStaTxBytesAt48Mbps Counter32,
monStaTxPktsAt54Mbps Counter32,
monStaTxBytesAt54Mbps Counter32,
monStaRxPktsAt1Mbps Counter32,
monStaRxBytesAt1Mbps Counter32,
monStaRxPktsAt2Mbps Counter32,
monStaRxBytesAt2Mbps Counter32,
monStaRxPktsAt5Mbps Counter32,
monStaRxBytesAt5Mbps Counter32,
monStaRxPktsAt11Mbps Counter32,
monStaRxBytesAt11Mbps Counter32,
monStaRxPktsAt6Mbps Counter32,
monStaRxBytesAt6Mbps Counter32,
monStaRxPktsAt12Mbps Counter32,
monStaRxBytesAt12Mbps Counter32,
monStaRxPktsAt18Mbps Counter32,
monStaRxBytesAt18Mbps Counter32,
monStaRxPktsAt24Mbps Counter32,
monStaRxBytesAt24Mbps Counter32,
monStaRxPktsAt36Mbps Counter32,
monStaRxBytesAt36Mbps Counter32,
monStaRxPktsAt48Mbps Counter32,
monStaRxBytesAt48Mbps Counter32,
monStaRxPktsAt54Mbps Counter32,
monStaRxBytesAt54Mbps Counter32,
monStaTxPktsAt9Mbps Counter32,
monStaTxBytesAt9Mbps Counter32,
monStaRxPktsAt9Mbps Counter32,
monStaRxBytesAt9Mbps Counter32
}
monStaTxPktsAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Transmitted by the
station at 1Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 1 }
monStaTxBytesAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 1Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 2 }
monStaTxPktsAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 2Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 3 }
monStaTxBytesAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 2Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 4 }
monStaTxPktsAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 5Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 5 }
monStaTxBytesAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 5Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 6 }
monStaTxPktsAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 11Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 7 }
monStaTxBytesAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 11Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 8 }
monStaTxPktsAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 6Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 9 }
monStaTxBytesAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 6Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 10 }
monStaTxPktsAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 12Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 11 }
monStaTxBytesAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 12Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 12 }
monStaTxPktsAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 18Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 13 }
monStaTxBytesAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 18Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 14 }
monStaTxPktsAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 24Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 15 }
monStaTxBytesAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 24Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 16 }
monStaTxPktsAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 36Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 17 }
monStaTxBytesAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 36Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 18 }
monStaTxPktsAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 48Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 19 }
monStaTxBytesAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 48Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 20 }
monStaTxPktsAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets transmitted by the
station at 54Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 21 }
monStaTxBytesAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets transmitted by the
station at 54Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 22 }
monStaRxPktsAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 1Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 23 }
monStaRxBytesAt1Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 1Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 24 }
monStaRxPktsAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 2Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 25 }
monStaRxBytesAt2Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 2Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 26 }
monStaRxPktsAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 5Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 27 }
monStaRxBytesAt5Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 5Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 28 }
monStaRxPktsAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 11Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 29 }
monStaRxBytesAt11Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 11Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 30 }
monStaRxPktsAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 6Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 31 }
monStaRxBytesAt6Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 6Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 32 }
monStaRxPktsAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 12Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 33 }
monStaRxBytesAt12Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 12Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 34 }
monStaRxPktsAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 18Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 35 }
monStaRxBytesAt18Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 18Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 36 }
monStaRxPktsAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 24Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 37 }
monStaRxBytesAt24Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 24Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 38 }
monStaRxPktsAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 36Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 39 }
monStaRxBytesAt36Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 36Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 40 }
monStaRxPktsAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 48Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 41 }
monStaRxBytesAt48Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 48Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 42 }
monStaRxPktsAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 54Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 43 }
monStaRxBytesAt54Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 54Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 44 }
monStaTxPktsAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Transmitted by the
station at 9Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 45 }
monStaTxBytesAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Transmitted by the
station at 9Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 46 }
monStaRxPktsAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Packets Received by the
station at 9Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 47 }
monStaRxBytesAt9Mbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Octets Received by the
station at 9Mbps rate.
"
::= { wlsxMonStaRateStatsEntry 48 }
-- This table breaks down the Station statistics based on the
-- Destination Address Types.
wlsxMonStaDATypeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonStaDATypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the Packet and Byte Counts for a monitored station but
but broken down in terms of Destination Address Type.
"
::= { wlsxMonStationStatsGroup 3}
wlsxMonStaDATypeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonStaDATypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data rate based packet and byte count entry for a monitored station"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStaDATypeStatsTable 1 }
WlsxMonStaDATypeStatsEntry ::=
SEQUENCE {
monStaTxDABroadcastPkts Counter32 ,
monStaTxDABroadcastBytes Counter32 ,
monStaTxDAMulticastPkts Counter32 ,
monStaTxDAMulticastBytes Counter32 ,
monStaTxDAUnicastPkts Counter32 ,
monStaTxDAUnicastBytes Counter32
}
monStaTxDABroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Broadcast packets
transmitted by this Station.
"
::= { wlsxMonStaDATypeStatsEntry 1 }
monStaTxDABroadcastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Broadcast Bytes
transmitted by this Station.
"
::= { wlsxMonStaDATypeStatsEntry 2 }
monStaTxDAMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Multicast packets
transmitted by this station.
"
::= { wlsxMonStaDATypeStatsEntry 3 }
monStaTxDAMulticastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of Multicast Bytes
transmitted by this station.
"
::= { wlsxMonStaDATypeStatsEntry 4 }
monStaTxDAUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total of Unicast packets
transmitted by this station.
"
::= { wlsxMonStaDATypeStatsEntry 5 }
monStaTxDAUnicastBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the total of Unicast Bytes
transmitted by this station.
"
::= { wlsxMonStaDATypeStatsEntry 6 }
-- This table breaks down the Station statistics based on the
-- the Type of the Packet.
wlsxMonStaFrameTypeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonStaFrameTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the Packet and Byte Counts for monitored
stations but broken down into different Frame Types.
"
::= { wlsxMonStationStatsGroup 4}
wlsxMonStaFrameTypeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonStaFrameTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frame Type based packet and byte count entry for a monitored station"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStaFrameTypeStatsTable 1 }
WlsxMonStaFrameTypeStatsEntry ::=
SEQUENCE {
monStaTxMgmtPkts Counter32 ,
monStaTxMgmtBytes Counter32 ,
monStaTxCtrlPkts Counter32 ,
monStaTxCtrlBytes Counter32 ,
monStaTxDataPkts Counter32 ,
monStaTxDataBytes Counter32 ,
monStaRxMgmtPkts Counter32 ,
monStaRxMgmtBytes Counter32 ,
monStaRxCtrlPkts Counter32 ,
monStaRxCtrlBytes Counter32 ,
monStaRxDataPkts Counter32 ,
monStaRxDataBytes Counter32
}
monStaTxMgmtPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Management packets
from a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 1 }
monStaTxMgmtBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Management Bytes
from a station
"
::= { wlsxMonStaFrameTypeStatsEntry 2 }
monStaTxCtrlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Control packets
from a station
"
::= { wlsxMonStaFrameTypeStatsEntry 3 }
monStaTxCtrlBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Control Bytes
from a station
"
::= { wlsxMonStaFrameTypeStatsEntry 4 }
monStaTxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Data packets
from a station
"
::= { wlsxMonStaFrameTypeStatsEntry 5 }
monStaTxDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the transmitted Data Bytes
observed from this station.
"
::= { wlsxMonStaFrameTypeStatsEntry 6 }
monStaRxMgmtPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Management packets
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 7 }
monStaRxMgmtBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Management Bytes
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 8 }
monStaRxCtrlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Control packets
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 9 }
monStaRxCtrlBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Control Bytes
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 10 }
monStaRxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Data packets
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 11 }
monStaRxDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of received Data Bytes
at a station.
"
::= { wlsxMonStaFrameTypeStatsEntry 12 }
-- This table breaks down the Station statistics received or transmitted by a
-- station into packet size buckets.
wlsxMonStaPktSizeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonStaPktSizeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the Packet and Byte Counts for monitored
stations but broken down into different Packet Sizes.
"
::= { wlsxMonStationStatsGroup 5}
wlsxMonStaPktSizeStatsEntry OBJECT-TYPE
SYNTAX WlsxMonStaPktSizeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet Size based packet count entry for a monitored station"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStaPktSizeStatsTable 1 }
WlsxMonStaPktSizeStatsEntry ::=
SEQUENCE {
monStaTxPkts63Bytes Counter32 ,
monStaTxPkts64To127 Counter32 ,
monStaTxPkts128To255 Counter32 ,
monStaTxPkts256To511 Counter32 ,
monStaTxPkts512To1023 Counter32 ,
monStaTxPkts1024To1518 Counter32 ,
monStaRxPkts63Bytes Counter32 ,
monStaRxPkts64To127 Counter32 ,
monStaRxPkts128To255 Counter32 ,
monStaRxPkts256To511 Counter32 ,
monStaRxPkts512To1023 Counter32 ,
monStaRxPkts1024To1518 Counter32
}
monStaTxPkts63Bytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were less than 64 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 1 }
monStaTxPkts64To127 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were between 64 and 127 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 2 }
monStaTxPkts128To255 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were between 128 and 255 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 3 }
monStaTxPkts256To511 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were between 256 and 511 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 4 }
monStaTxPkts512To1023 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were between 512 and 1023 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 5 }
monStaTxPkts1024To1518 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets transmitted by the
station that were between 1024 and 1518 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 6 }
monStaRxPkts63Bytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were less than 64 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 7 }
monStaRxPkts64To127 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were between 64 and 127 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 8 }
monStaRxPkts128To255 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were between 128 and 255 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 9 }
monStaRxPkts256To511 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were between 256 and 511 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 10 }
monStaRxPkts512To1023 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were between 512 and 1023 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 11 }
monStaRxPkts1024To1518 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the number of packets Received by the
station that were between 1024 and 1518 bytes long.
"
::= { wlsxMonStaPktSizeStatsEntry 12 }
-- Info group contains tables for monitored APs and stations
wlsxMonAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 1 }
wlsxMonStationInfoGroup OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 2 }
wlsxMonAPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonAPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This lists all of the Access Points being monitored by
the controller.
"
::= { wlsxMonAccessPointInfoGroup 1 }
wlsxMonAPInfoEntry OBJECT-TYPE
SYNTAX WlsxMonAPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access Point Info entry"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxMonAPInfoTable 1 }
WlsxMonAPInfoEntry ::=
SEQUENCE {
monAPInfoPhyType ArubaPhyType,
monAPInfoCurrentChannel Unsigned32,
monAPInfoClassification ArubaRogueApType,
monAPInfoESSID DisplayString,
monAPInfoRSSI Integer32,
monAPInfoMonitorTime TimeTicks,
monAPInfoInactivityTime TimeTicks,
monAPInfoSnrSignalPkts Integer32,
monAPInfoSnrSampleTime Integer32,
monAPInfoStatus INTEGER,
monAPInfoConfidence Integer32,
monAPInfoMatchType ArubaAPMatchType,
monAPInfoMatchMethod ArubaAPMatchMethod,
monAPInfoHTMode ArubaHTMode,
monAPInfoEncryptionType ArubaMonEncryptionType,
monAPInfoWPAUnicastCipher ArubaMonEncryptionCipher,
monAPInfoWPAAuthAlgorithm ArubaMonAuthAlgorithm,
monAPInfoIBSS TruthValue
}
monAPInfoPhyType OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PHY type of the access point being monitored.
"
::= { wlsxMonAPInfoEntry 1 }
monAPInfoCurrentChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Channel the monitored AP is using.
"
::= { wlsxMonAPInfoEntry 2 }
monAPInfoClassification OBJECT-TYPE
SYNTAX ArubaRogueApType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates the type of the AP.
"
::= { wlsxMonAPInfoEntry 3 }
monAPInfoESSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the access point being monitored.
"
::= { wlsxMonAPInfoEntry 4 }
monAPInfoRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR of the access point being monitored.
"
::= { wlsxMonAPInfoEntry 5 }
monAPInfoMonitorTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates how long the access point has been
monitored.
"
::= { wlsxMonAPInfoEntry 6 }
monAPInfoInactivityTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates how long the access point has been
inactive.
"
::= { wlsxMonAPInfoEntry 7 }
monAPInfoSnrSignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring AP
during this sample time.
"
::= { wlsxMonAPInfoEntry 8 }
monAPInfoSnrSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which SNR data was collected.
"
::= { wlsxMonAPInfoEntry 9 }
monAPInfoStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates whether this AP is considered to be up or down.
"
::= { wlsxMonAPInfoEntry 10 }
monAPInfoConfidence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the confidence that a suspected rogue AP is in fact a
rogue in terms of percentage.
"
::= { wlsxMonAPInfoEntry 11 }
monAPInfoMatchType OBJECT-TYPE
SYNTAX ArubaAPMatchType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The method used to classify the AP as a rogue or suspected rogue AP.
"
::= { wlsxMonAPInfoEntry 12 }
monAPInfoMatchMethod OBJECT-TYPE
SYNTAX ArubaAPMatchMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates how the match occurred for rogue or suspect-rogue
classification: an exact or +1 or -1 MAC match.
"
::= { wlsxMonAPInfoEntry 13 }
monAPInfoHTMode OBJECT-TYPE
SYNTAX ArubaHTMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the HT mode of the monitored AP, if any.
"
::= { wlsxMonAPInfoEntry 14 }
monAPInfoEncryptionType OBJECT-TYPE
SYNTAX ArubaMonEncryptionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the Encryption type of the monitored AP.
"
::= { wlsxMonAPInfoEntry 15 }
monAPInfoWPAUnicastCipher OBJECT-TYPE
SYNTAX ArubaMonEncryptionCipher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the WPA/WPA2 unicast cipher supported by the monitored AP.
If multiple ciphers are supported, the weakest will be indicated.
"
::= { wlsxMonAPInfoEntry 16 }
monAPInfoWPAAuthAlgorithm OBJECT-TYPE
SYNTAX ArubaMonAuthAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the WPA/WPA2 authentication algorithm supported by the monitored AP.
If multiple authentication algorithms are supported, the weakest will be indicated.
"
::= { wlsxMonAPInfoEntry 17 }
monAPInfoIBSS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates if the monitored AP is part of an adhoc network.
"
::= { wlsxMonAPInfoEntry 18 }
wlsxMonStationInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonStationInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists statistics of all the wireless stations
being monitored.
"
::= { wlsxMonStationInfoGroup 1}
wlsxMonStationInfoEntry OBJECT-TYPE
SYNTAX MonStationInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Info Entry"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxMonStationInfoTable 1 }
MonStationInfoEntry ::=
SEQUENCE {
monStaInfoChannelNum Unsigned32,
monStaInfoBSSID MacAddress,
monStaInfoESSID DisplayString,
monStaInfoPhyType ArubaPhyType,
monStaInfoRSSI Integer32,
monStaInfoClassification ArubaStationType,
monStaInfoMonitorTime TimeTicks,
monStaInfoInactivityTime TimeTicks,
monStaInfoSnrSignalPkts Integer32,
monStaInfoSnrSampleTime Integer32,
monStaInfoStatus INTEGER,
monStaInfoHTMode ArubaHTMode
}
monStaInfoChannelNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The channel the station is currently using.
"
::= { wlsxMonStationInfoEntry 1 }
monStaInfoBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
BSSID of the station being monitored.
"
::= { wlsxMonStationInfoEntry 2 }
monStaInfoESSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the station being monitored.
"
::= { wlsxMonStationInfoEntry 3 }
monStaInfoPhyType OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PHY type the station being monitored.
"
::= { wlsxMonStationInfoEntry 4 }
monStaInfoRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR of the station being monitored.
"
::= { wlsxMonStationInfoEntry 5 }
monStaInfoClassification OBJECT-TYPE
SYNTAX ArubaStationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
"
::= { wlsxMonStationInfoEntry 6 }
monStaInfoMonitorTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates how long the station has been
monitored.
"
::= { wlsxMonStationInfoEntry 7 }
monStaInfoInactivityTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This attribute indicates how long the station has been
inactive.
"
::= { wlsxMonStationInfoEntry 8 }
monStaInfoSnrSignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring station
during this sample time.
"
::= { wlsxMonStationInfoEntry 9 }
monStaInfoSnrSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which SNR data was collected.
"
::= { wlsxMonStationInfoEntry 10 }
monStaInfoStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates whether this station is considered up or down.
"
::= { wlsxMonStationInfoEntry 11 }
monStaInfoHTMode OBJECT-TYPE
SYNTAX ArubaHTMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the HT mode of the station, if any.
"
::= { wlsxMonStationInfoEntry 12 }
-- Event table contains the event ID and the number of events of that type
-- raised so far
wlsxMonEventCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonEventCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists counts of Events generated by the APs.
"
::= { wlsxMonStationStatsGroup 6}
wlsxMonEventCountEntry OBJECT-TYPE
SYNTAX MonEventCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event Count Entry"
INDEX {monEventID}
::= { wlsxMonEventCountTable 1 }
MonEventCountEntry ::=
SEQUENCE {
monEventID Unsigned32,
monEventCount Unsigned32
}
monEventID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Event ID
"
::= { wlsxMonEventCountEntry 1 }
monEventCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Event Count
"
::= { wlsxMonEventCountEntry 2 }
-- This table breaks down the station statistics observed into different
-- HT rate categories.
wlsxMonStationHTRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxMonStationHTRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table contains all the monitored AP Packet and Byte Counts
but represented in terms of HT rate categories.
"
::= { wlsxMonStationStatsGroup 7 }
wlsxMonStationHTRateStatsEntry OBJECT-TYPE
SYNTAX WlsxMonStationHTRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"HT Data rate based packet and byte count entry for a monitored station"
INDEX { monPhyAddress, monRadioNumber, monitoredStaPhyAddress, monHTRate }
::= { wlsxMonStationHTRateStatsTable 1 }
WlsxMonStationHTRateStatsEntry ::=
SEQUENCE {
monStaTxHTPkts Counter32,
monStaTxHTBytes Counter32,
monStaRxHTPkts Counter32,
monStaRxHTBytes Counter32
}
monStaTxHTPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets transmitted at the indicated rate
"
::= { wlsxMonStationHTRateStatsEntry 1 }
monStaTxHTBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of bytes transmitted at the indicated rate
"
::= { wlsxMonStationHTRateStatsEntry 2 }
monStaRxHTPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets received at the indicated rate
"
::= { wlsxMonStationHTRateStatsEntry 3 }
monStaRxHTBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of bytes received at the indicated rate
"
::= { wlsxMonStationHTRateStatsEntry 4 }
END