mibs/MIBS/audiocodes/AC-PSTN-MIB
2023-12-05 12:25:34 +01:00

2310 lines
59 KiB
Plaintext
Raw Blame History

AC-PSTN-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
TAddress,
DisplayString,
DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC
IpAddress FROM RFC1155-SMI
Unsigned32,
Integer32,
enterprises FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
audioCodes,
acRegistrations,
acGeneric,
acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB;
acPSTN MODULE-IDENTITY
LAST-UPDATED "201209241539Z" --Monday, September 24 2012
ORGANIZATION "AudioCodes Ltd"
CONTACT-INFO
"Postal: Support
AudioCodes LTD
1 Hayarden Street
Airport City
Lod, ISRAEL 70151
Tel: 972-3-9764000
Fax: 972-3-9764040
Email: support@audiocodes.com
Web: www.audiocodes.com"
DESCRIPTION
""
::= {acBoardMibs 9}
acPSTNConfiguration OBJECT IDENTIFIER ::= {acPSTN 1}
acTrunkConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 1}
acTrunk OBJECT IDENTIFIER ::= {acTrunkConfig 1}
-- ****************************************
-- acTrunk table declaration
-- ****************************************
acTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunk 1}
-- ****************************************
-- acTrunk table entry
-- ****************************************
acTrunkEntry OBJECT-TYPE
SYNTAX AcTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkTable 1}
-- ****************************************
-- acTrunk TABLE
-- ****************************************
AcTrunkEntry ::= SEQUENCE {
acTrunkIndex Unsigned32,
acTrunkAdministrativeState INTEGER,
acTrunkProtocolType INTEGER,
acTrunkClockMaster INTEGER,
acTrunkFramingMethod INTEGER,
acTrunkLineCode INTEGER,
acTrunkTraceLevel INTEGER,
acTrunkDialPlanName SnmpAdminString,
acTrunkLineType INTEGER,
acTrunkAutoClockPriority Unsigned32,
acTrunkDeactivate INTEGER,
acTrunkLoopbackConfig INTEGER
}
acTrunkIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..83)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk ID at board in which the call is taking place.
AC INI-Param: N/A"
::= {acTrunkEntry 1}
acTrunkAdministrativeState OBJECT-TYPE
SYNTAX INTEGER {
locked(0)
,
unLocked(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunk Administrative State.
Access: Online.
AC INI-Param: N/A"
::= {acTrunkEntry 2}
acTrunkProtocolType OBJECT-TYPE
SYNTAX INTEGER {
nONE(0)
,
e1EuroISDN(1)
,
t1Cas(2)
,
t1RawCas(3)
,
t1Transparent(4)
,
e1Transparent31(5)
,
e1Transparent30(6)
,
e1Mfcr2(7)
,
e1CasR2(8)
,
e1RawCAS(9)
,
t1-NI2ISDN(10)
,
t1-4EssISDN(11)
,
t1-5Ess-9-ISDN(12)
,
t1-5Ess-10-ISDN(13)
,
t1-Dms100-ISDN(14)
,
j1-TRANSPARENT(15)
,
t1-NTT-ISDN(16)
,
e1-AUSTEL-ISDN(17)
,
e1-HKT-ISDN(18)
,
e1-KOR-ISDN(19)
,
t1-HKT-ISDN(20)
,
e1-QSIG(21)
,
e1-TNZ-22(22)
,
t1-EXTRA-23(23)
,
t1-IUA(28)
,
e1-IUA(29)
,
e1-EXTRA-30(30)
,
e1-FRENCH-VN3-ISDN(31)
,
t1-EXTRA-32(32)
,
eXTRA-33(33)
,
t1-EURO-ISDN(34)
,
t1-DMS100-MERIDIAN-ISDN(35)
,
t1-NI1-ISDN(36)
,
e1-DUA(37)
,
e1-Q931-PACKETS(38)
,
t1-Q931-PACKETS(39)
,
e1-NI2-ISDN(40)
,
e1-CAS-R15(41)
,
v5(43)
,
bRI-EURO-ISDN(50)
,
bRI-NI-2(51)
,
bRI-DMS100(52)
,
bRI-5ESS(53)
,
bRI-QSIG(54)
,
bRI-VNG(55)
,
bRI-NTT(56)
,
bRI-IUA(57)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2).
Either:
NONE = 0
E1_EURO_ISDN = 1
T1_CAS = 2
T1_RAW_CAS = 3
T1_TRANSPARENT = 4
E1_TRANSPARENT_31 = 5
E1_TRANSPARENT_30 = 6
E1_MFCR2 = 7
E1_CAS = 8
E1_RAW_CAS = 9
T1_NI2_ISDN = 10
T1_4ESS_ISDN = 11
T1_5ESS_9_ISDN = 12
T1_5ESS_10_ISDN = 13
T1_DMS100_ISDN = 14
J1_TRANSPARENT = 15
T1_NTT_ISDN = 16
E1_AUSTEL_ISDN = 17
E1_HKT_ISDN = 18
E1_KOR_ISDN = 19
T1_HKT_ISDN = 20
E1_QSIG = 21
E1_TNZ_ISDN = 22
T1_QSIG = 23
T1_IUA = 28
E1_IUA = 29
E1_FRENCH_VN6_ISDN = 30
E1_FRENCH_VN3_ISDN = 31
T1_EURO_ISDN = 34
T1_DMS100_MERIDIAN_ISDN = 35
T1_NI1_ISDN = 36
E1_DUA = 37
E1_Q931_PACKETS = 38
T1_Q931_PACKETS = 39
E1_NI2_ISDN = 40
E1-CAS-R15 = 41
V5 = 43
BRI-EURO-ISDN = 50
BRI-NI-2 = 51
BRI-DMS100 = 52
BRI-5ESS = 53
BRI-QSIG = 54
BRI-VNG = 55
BRI-NTT = 56
BRI-IUA = 57.
.
Access: Online.
AC INI-Param: PROTOCOLTYPE"
::= {acTrunkEntry 3}
acTrunkClockMaster OBJECT-TYPE
SYNTAX INTEGER {
acCLOCK-MASTER-OFF(0)
,
acCLOCK-MASTER-ON(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clock recovered from the line)
1 = acCLOCK_MASTER_ON (the trunk clock source is provided by
the internal/TDM bus clock source depending on the parameter
TDM Bus Clock Source).
Access: Online.
AC INI-Param: CLOCKMASTER"
::= {acTrunkEntry 4}
acTrunkFramingMethod OBJECT-TYPE
SYNTAX INTEGER {
eXTENDED-SUPER-FRAME(0)
,
sUPER-FRAME(1)
,
e1-FRAMING-DDF(2)
,
e1-FRAMING-MFF-CRC4(3)
,
e1-FRAMING-MFF-CRC4-EXT(4)
,
t1-FRAMING-F4(6)
,
t1-FRAMING-F12(7)
,
t1-FRAMING-ESF(8)
,
t1-FRAMING-ESF-CRC6 (9)
,
t1-FRAMING-F72(10)
,
t1-FRAMING-ESF-CRC6-JT(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the Framing method to be used for this trunk.
Access: Online.
AC INI-Param: N/A"
::= {acTrunkEntry 5}
acTrunkLineCode OBJECT-TYPE
SYNTAX INTEGER {
acB8ZS(0)
,
acAMI(1)
,
acHDB3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only = default)
1 = Use AMI line code (for T1 or E1 trunks)
2 = Use HDB3 line code (for E1 trunks only).
Access: Online.
AC INI-Param: LINECODE"
::= {acTrunkEntry 6}
acTrunkTraceLevel OBJECT-TYPE
SYNTAX INTEGER {
acNO-TRACE(0)
,
acFULL-ISDN-TRACE(1)
,
acLAYER3-ISDN-TRACE(2)
,
acONLY-ISDN-Q931-MSGS-TRACE(3)
,
acLAYER3-ISDN-TRACE-NO-DUPLICATION(4)
,
acFULL-ISDN-TRACE-WITH-DUPLICATION(5)
,
acISDN-Q931-RAW-DATA-TRACE(6)
,
acISDN-Q921-RAW-DATA-TRACE(7)
,
acISDN-Q931-Q921-RAW-DATA-TRACE(8)
,
acSS7-MTP2(10)
,
acSS7-MTP2-AND-APPLI(11)
,
acSS7-MTP2-SL-L3-NO-MSU(12)
,
acSS7-AAL(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Trace level:
acNO_TRACE = 0
acFULL_ISDN_TRACE = 1
acLAYER3_ISDN_TRACE = 2
acONLY_ISDN_Q931_MSGS_TRACE = 3
acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4
acFULL_ISDN_TRACE_WITH_DUPLICATION = 5
acISDN_Q931_RAW_DATA_TRACE = 6
acISDN_Q921_RAW_DATA_TRACE = 7
acISDN_Q931_Q921_RAW_DATA_TRACE = 8
acSS7_MTP2 = 10
acSS7_MTP2_AND_APPLI = 11
acSS7_MTP2_SL_L3_NO_MSU = 12
acSS7_AAL = 15.
Access: Online.
AC INI-Param: TRACELEVEL"
::= {acTrunkEntry 7}
acTrunkDialPlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..11))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Dial Plan name that will be used on the specific trunk.
Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName"
::= {acTrunkEntry 8}
acTrunkLineType OBJECT-TYPE
SYNTAX INTEGER {
lineTypeE1(10)
,
lineTypeT1(11)
,
lineTypeBRI(12)
,
lineTypeUnknown(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line type.
lineTypeBRI(12) - If the physical type is BRI.
lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are
other lines that are already configured to either E1 or T1.
lineTypeUnknown(-1) - For non BRI IF when no lines are configured.
AC INI-Param: N/A"
::= {acTrunkEntry 9}
acTrunkAutoClockPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 =
highest Priority and is the default setting
100 = Do not choose this trunk).
Access: Online.
AC INI-Param: AutoClockTrunkPriority"
::= {acTrunkEntry 10}
acTrunkDeactivate OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0)
,
deActivated(1)
,
activated(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Deactivating a trunk forces AIS alarm on that trunk. Deactivation
is used for trunk maintenance without locking the trunk.
Activating the trunk will stop the alarm on the trunk.
notAvailable(0) appears when the trunk is locked. The trunk
can't be SET to this state.
Access: Online.
AC INI-Param: N/A"
::= {acTrunkEntry 11}
acTrunkLoopbackConfig OBJECT-TYPE
SYNTAX INTEGER {
noLoop(0)
,
lineLoop(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable represents the loopback state of the trunk.
Access: Offline.
AC INI-Param: N/A"
::= {acTrunkEntry 12}
acTrunkLine OBJECT IDENTIFIER ::= {acTrunkConfig 2}
-- ****************************************
-- acTrunkLine table declaration
-- ****************************************
acTrunkLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= {acTrunkLine 1}
-- ****************************************
-- acTrunkLine table entry
-- ****************************************
acTrunkLineEntry OBJECT-TYPE
SYNTAX AcTrunkLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"configuration of the DS1 interface. "
INDEX {acTrunkIndex}
::= {acTrunkLineTable 1}
-- ****************************************
-- acTrunkLine TABLE
-- ****************************************
AcTrunkLineEntry ::= SEQUENCE {
acTrunkLineBuildOutLoss INTEGER,
acTrunkLineBuildOutOverwrite INTEGER,
acTrunkLineBuildOutXPM0 Unsigned32,
acTrunkLineBuildOutXPM1 Unsigned32,
acTrunkLineBuildOutXPM2 Unsigned32
}
acTrunkLineBuildOutLoss OBJECT-TYPE
SYNTAX INTEGER {
ac0DB(0)
,
ac7-5DB(1)
,
ac15DB(2)
,
ac22-5DB(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to select the line build out loss to be used for this trunk.
0 = 0 dB
1 = 7.5 dB
2 = 15 dB
3 = 22.5 dB.
Access: Online.
AC INI-Param: LINEBUILDOUT.LOSS"
::= {acTrunkLineEntry 1}
acTrunkLineBuildOutOverwrite OBJECT-TYPE
SYNTAX INTEGER {
acNO-OVER-WRITE(0)
,
acOVER-WRITE(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to overwrite the Framer's XPM registers values (these registers
control the line pulse shape).
0 = No overwrite
1 = Overwrite.
Access: Online.
AC INI-Param: LINEBUILDOUT.OVERWRITE"
::= {acTrunkLineEntry 2}
acTrunkLineBuildOutXPM0 OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to control the Framer's XPM0 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.
Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM0"
::= {acTrunkLineEntry 3}
acTrunkLineBuildOutXPM1 OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to control the Framer's XPM1 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.
Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM1"
::= {acTrunkLineEntry 4}
acTrunkLineBuildOutXPM2 OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to control the Framer's XPM2 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.
Range = 0 to 255.
Access: Online.
AC INI-Param: LINEBUILDOUT.XPM2"
::= {acTrunkLineEntry 5}
acTrunkISDN OBJECT IDENTIFIER ::= {acTrunkConfig 3}
acTrunkISDNCommon OBJECT IDENTIFIER ::= {acTrunkISDN 1}
-- ****************************************
-- acTrunkISDNCommon table declaration
-- ****************************************
acTrunkISDNCommonTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkISDNCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkISDNCommon 1}
-- ****************************************
-- acTrunkISDNCommon table entry
-- ****************************************
acTrunkISDNCommonEntry OBJECT-TYPE
SYNTAX AcTrunkISDNCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkISDNCommonTable 1}
-- ****************************************
-- acTrunkISDNCommon TABLE
-- ****************************************
AcTrunkISDNCommonEntry ::= SEQUENCE {
acTrunkISDNCommonTerminationSide INTEGER,
acTrunkISDNCommonQ931LayerResponseBehavior Integer32,
acTrunkISDNCommonIncomingCallsBehavior Unsigned32,
acTrunkISDNCommonOutgoingCallsBehavior Unsigned32,
acTrunkISDNCommonGeneralCCBehavior Unsigned32,
acTrunkISDNCommonIuaInterfaceId Integer32,
acTrunkISDNCommonDuplicateQ931BuffMode Unsigned32,
acTrunkISDNCommonBRILayer2Mode INTEGER,
acTrunkISDNCommonNSBehaviour2 Unsigned32,
acTrunkISDNCommonRestartBChannel Integer32
}
acTrunkISDNCommonTerminationSide OBJECT-TYPE
SYNTAX INTEGER {
acUSER-TERMINATION-SIDE(0)
,
acNETWORK-TERMINATION-SIDE(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to set the ISDN Termination to either User or Network.
Termination = For ISDN only.
User side = 0
Network side = 1.
Access: Online.
AC INI-Param: TERMINATIONSIDE"
::= {acTrunkISDNCommonEntry 1}
acTrunkISDNCommonQ931LayerResponseBehavior OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves.
Access: Online.
AC INI-Param: ISDNIBEHAVIOR"
::= {acTrunkISDNCommonEntry 2}
acTrunkISDNCommonIncomingCallsBehavior OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the bit-field used to determine several behavior options
that influence how the ISDN Stack INCOMING calls behave.
Refer to the Appendix A.8 'ISDN Flexible Behavior' in the
VoPLib Reference Library User's Manual Document #: LTRT-00740.
Access: Online.
AC INI-Param: ISDNINCALLSBEHAVIOR"
::= {acTrunkISDNCommonEntry 3}
acTrunkISDNCommonOutgoingCallsBehavior OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the bit-field used to determine several behavior options
that influence how the ISDN Stack OUTGOING calls behave.
Refer to Appendix A.8 in the 'VoPLib Reference Library User's
Manual.
Access: Online.
AC INI-Param: ISDNOUTCALLSBEHAVIOR"
::= {acTrunkISDNCommonEntry 4}
acTrunkISDNCommonGeneralCCBehavior OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the bit-field used to determine several general ISDN
behavior options. Refer to the Appendix A.8 'ISDN Flexible
Behavior' in the VoPLib Reference Library User's Manual Document
#: LTRT-00740.
Access: Online.
AC INI-Param: ISDNGENERALCCBEHAVIOR"
::= {acTrunkISDNCommonEntry 5}
acTrunkISDNCommonIuaInterfaceId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the IUA trunk interface ID value - unsigned integer
- in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF.
AC INI-Param: N/A"
::= {acTrunkISDNCommonEntry 6}
acTrunkISDNCommonDuplicateQ931BuffMode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates / de-activates delivery of raw Q.931 messages. Refer
to the VoPLib documentation ('ISDN Flexible Behavior').
Access: Online.
AC INI-Param: ISDNDUPLICATEQ931BUFFMODE"
::= {acTrunkISDNCommonEntry 7}
acTrunkISDNCommonBRILayer2Mode OBJECT-TYPE
SYNTAX INTEGER {
bRI-L2-MODE-P2P(0)
,
bRI-L2-MODE-P2MP(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates point to point or point to Multipoint mode for layer2.
Applicable in BRI trunks only. One of the following values:
Point to point = 0
Point to Multipoint = 1
.
Access: Online.
AC INI-Param: BriLayer2Mode"
::= {acTrunkISDNCommonEntry 8}
acTrunkISDNCommonNSBehaviour2 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves.
Refer to the VoPLib documentation (ISDN Flexible Behavior).
Access: Online.
AC INI-Param: ISDNNSBehaviour2"
::= {acTrunkISDNCommonEntry 9}
acTrunkISDNCommonRestartBChannel OBJECT-TYPE
SYNTAX Integer32 (-1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sends restart request for a specific B-channel. Only ONE restart
request at a time for a given trunk should be sent, since
the restart state machine is not on per B-channel basis,
but on a per trunk basis. Inputs:
E1: -1, 1 - 31.
T1: -1, 1 - 24.
Use -1 to reset and re-initialize all B-channels in the selected
trunk.
Access: Online.
AC INI-Param: N/A"
::= {acTrunkISDNCommonEntry 10}
acTrunkISDNNfas OBJECT IDENTIFIER ::= {acTrunkISDN 2}
-- ****************************************
-- acTrunkISDNNfas table declaration
-- ****************************************
acTrunkISDNNfasTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkISDNNfasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkISDNNfas 1}
-- ****************************************
-- acTrunkISDNNfas table entry
-- ****************************************
acTrunkISDNNfasEntry OBJECT-TYPE
SYNTAX AcTrunkISDNNfasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkISDNNfasTable 1}
-- ****************************************
-- acTrunkISDNNfas TABLE
-- ****************************************
AcTrunkISDNNfasEntry ::= SEQUENCE {
acTrunkISDNNfasDchConfig INTEGER,
acTrunkISDNNfasInterfaceId Unsigned32,
acTrunkISDNNfasGroupNumber Unsigned32
}
acTrunkISDNNfasDchConfig OBJECT-TYPE
SYNTAX INTEGER {
acDCH-CONFIG-PRIMARY(0)
,
acDCH-CONFIG-BACKUP(1)
,
acDCH-CONFIG-NFAS(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines D-channel configuration. This setting is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.
0 = D-channel is Primary
1 = Backup
2 = NFAS.
Access: Online.
AC INI-Param: DCHCONFIG"
::= {acTrunkISDNNfasEntry 1}
acTrunkISDNNfasInterfaceId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID.
Refer to the VoPLib documentation(ISDN Flexible Behavior).
Default = (unsigned char)-1.
Range = 0 to 255.
Access: Online.
AC INI-Param: ISDNNFASINTERFACEID"
::= {acTrunkISDNNfasEntry 2}
acTrunkISDNNfasGroupNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Relevant only for T1 ISDN NFAS trunks indicates the group number
of the NFAS group. ;Valid NFAS group numbers are only
1 to 9, 0 indicating that this trunk is not NFAS (in this
case the ISDNNFASInterfaceID and DchConfig parameters are ignored).
Access: Online.
AC INI-Param: NFASGROUPNUMBER"
::= {acTrunkISDNNfasEntry 3}
acTrunkISDNDpnss OBJECT IDENTIFIER ::= {acTrunkISDN 3}
-- ****************************************
-- acTrunkISDNDpnss table declaration
-- ****************************************
acTrunkISDNDpnssTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkISDNDpnssEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkISDNDpnss 1}
-- ****************************************
-- acTrunkISDNDpnss table entry
-- ****************************************
acTrunkISDNDpnssEntry OBJECT-TYPE
SYNTAX AcTrunkISDNDpnssEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkISDNDpnssTable 1}
-- ****************************************
-- acTrunkISDNDpnss TABLE
-- ****************************************
AcTrunkISDNDpnssEntry ::= SEQUENCE {
acTrunkISDNDpnssBehavior Unsigned32,
acTrunkISDNDpnssNumRealChannels Unsigned32,
acTrunkISDNDpnssNumVirtualChannels Unsigned32
}
acTrunkISDNDpnssBehavior OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DPNSSBehaviour parameter represents a Bit field parameter.
Each bit represents a specific type of DPNSS behavior. Currently
only the first 2 bits are in use.
- DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit
mask 0x0001)
When set to 1: DPNSS stops repeating SABMR after NL and NT1
limits are exceeded.
When set to 0: DPNSS continues repeating SABMR after NL and
NT1 limits are exceeded.
Default is 0 (continue repeating SABMR)
- DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002)
When set to 1: the Startup Procedure is considered as a SUCCESS
only when ALL DLCs succeeded to Reset
When set to 0: the Startup Procedure is considered as a SUCCESS
as soon as 1 DLC succeeded to Reset
Default is 0: (only partial reset is considered as a success).
.
Access: Online.
AC INI-Param: DPNSSBehavior"
::= {acTrunkISDNDpnssEntry 1}
acTrunkISDNDpnssNumRealChannels OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of real channels. Default value is 30. Valid
range 1 to 30.
Access: Online.
AC INI-Param: DPNSSNumRealChannels"
::= {acTrunkISDNDpnssEntry 2}
acTrunkISDNDpnssNumVirtualChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of virtual channels. Default value is 30. Valid
range 0 to 30.
Access: Online.
AC INI-Param: DPNSSNumVirtualChannels"
::= {acTrunkISDNDpnssEntry 3}
acTrunkCAS OBJECT IDENTIFIER ::= {acTrunkConfig 4}
-- ****************************************
-- acTrunkCAS table declaration
-- ****************************************
acTrunkCASTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkCASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkCAS 1}
-- ****************************************
-- acTrunkCAS table entry
-- ****************************************
acTrunkCASEntry OBJECT-TYPE
SYNTAX AcTrunkCASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkCASTable 1}
-- ****************************************
-- acTrunkCAS TABLE
-- ****************************************
AcTrunkCASEntry ::= SEQUENCE {
acTrunkCASTablesIndex Unsigned32,
acTrunkCASTablePerChannel SnmpAdminString
}
acTrunkCASTablesIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter determines which CAS protocol file to use on
a specific trunk. The index value corresponds to the number
configured for the parameter CASFileName_X.
Range = not greater than the parameter defining the PSTN CAS
Table Num.
Access: Online.
AC INI-Param: CASTABLEINDEX"
::= {acTrunkCASEntry 1}
acTrunkCASTablePerChannel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Cas protocol table index per channel.
User need to set each channel the table number 0-7, with comma
saperator between channels:
'1,3,1,3,1,3..'.
Access: Instant.
AC INI-Param: CasChannelIndex"
::= {acTrunkCASEntry 2}
acTrunkV5 OBJECT IDENTIFIER ::= {acTrunkConfig 5}
-- ****************************************
-- acTrunkV5 table declaration
-- ****************************************
acTrunkV5Table OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkV5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkV5 1}
-- ****************************************
-- acTrunkV5 table entry
-- ****************************************
acTrunkV5Entry OBJECT-TYPE
SYNTAX AcTrunkV5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkV5Table 1}
-- ****************************************
-- acTrunkV5 TABLE
-- ****************************************
AcTrunkV5Entry ::= SEQUENCE {
acTrunkV5NumberOfCChannels Unsigned32,
acTrunkV5ProtocolSide INTEGER
}
acTrunkV5NumberOfCChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of timeslots used as communication channels
in a V5 trunk.
0 - No C-channel, the trunk is voice only.
1 - Timeslot 16 is used for the V5 signaling
.
Access: Online.
AC INI-Param: V5NumberOfCChannels"
::= {acTrunkV5Entry 1}
acTrunkV5ProtocolSide OBJECT-TYPE
SYNTAX INTEGER {
an-Side(0)
,
le-Side(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the V5 side of the V5 protocol served by the trunk..
0 - AN side.
1 - LE side
.
Access: Online.
AC INI-Param: V5ProtocolSide"
::= {acTrunkV5Entry 2}
acTrunkGlobal OBJECT IDENTIFIER ::= {acTrunkConfig 8}
acTrunkGlobalLifeLineType OBJECT-TYPE
SYNTAX INTEGER {
hW-Only(0)
,
hW-And-Link-Detection(1)
,
hW-And-Link-And-Network-Detection(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is used to define the type of trunk lifeline.
Short trunks 1-2, 3-4.
0 = Activate lifeline on power down
1 = Activate lifeline on power down or on detection of LAN
disconnect
2 = Activate lifeline on power down or on detection of LAN
disconnect or loss of ping.
Access: Offline.
AC INI-Param: TrunkLifeLineType"
::= {acTrunkGlobal 1}
acTrunkGlobalBChannelAlarms OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 1 B-Channels Alarms will be sent.
Access: Offline.
AC INI-Param: BChannelAlarms"
::= {acTrunkGlobal 2}
acISDNConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 2}
acMiscISDN OBJECT IDENTIFIER ::= {acISDNConfig 1}
acMiscISDNQ931RelayMode OBJECT-TYPE
SYNTAX INTEGER {
none(0)
,
activateLAPDmessaging (1)
,
layer3-IS-IUA (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates / de-activates the ISDN level 3 Q.931 Relay Mode.
Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or
Layer3_IS_IUA.
Access: Offline.
AC INI-Param: Q931RELAYMODE"
::= {acMiscISDN 1}
acMiscISDNDuplicateQ931BuffMode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Access: Offline.
AC INI-Param: ISDNDUPLICATEQ931BUFFMODE"
::= {acMiscISDN 2}
acDS3Config OBJECT IDENTIFIER ::= {acPSTNConfiguration 3}
acDS3ConfigFramingMethod OBJECT-TYPE
SYNTAX INTEGER {
dS3-M23(0)
,
dS3-C-BIT-PARITY(1)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Used to select the physical DS3 framing method to be used in
this board.
0 = M23 framing
1 = C Bit Parity.
Access: Offline.
AC INI-Param: DS3FRAMINGMETHOD"
::= {acDS3Config 1}
acDS3ConfigClockSource OBJECT-TYPE
SYNTAX INTEGER {
acClock-Source-External(0)
,
acClock-Source-Local-Board(1)
,
acClock-Source-Local-PLL(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Selects the physical DS3 framing method to be used in this board.
Applicable only to the TP-2810.
0 = DS3 Clock is recovered from the line
1 = DS3 trunk clock source is provided by the board's internal
clock
2 = Clock is taken from the local PLL which is not synchronized
with any other clock.
Access: Offline.
AC INI-Param: DS3CLOCKSOURCE"
::= {acDS3Config 2}
acDS3ConfigLineBuiltOut OBJECT-TYPE
SYNTAX INTEGER {
acLINE-BUILT-OUT-LEVEL-1(0)
,
acLINE-BUILT-OUT-LEVEL-2(1)
,
acLINE-BUILT-OUT-LEVEL-3(2)
,
acLINE-BUILT-OUT-LEVEL-4(3)
,
acLINE-BUILT-OUT-LEVEL-5(4)
,
acLINE-BUILT-OUT-LEVEL-6(5)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Used to select the DS3 line build out. Applies only to the TP-2810.
Access: Offline.
AC INI-Param: DS3LINEBUILTOUT"
::= {acDS3Config 3}
acCasConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 4}
acCasConfigEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter enables or disables the possibility CAS protocol
configuration. At TP6310 When this parameter is enable the
conference will disabled in case it's relevant.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: CASProtocolEnable"
::= {acCasConfig 1}
acCASFile OBJECT IDENTIFIER ::= {acCasConfig 2}
-- ****************************************
-- acCASFile table declaration
-- ****************************************
acCASFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcCASFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acCASFile 1}
-- ****************************************
-- acCASFile table entry
-- ****************************************
acCASFileEntry OBJECT-TYPE
SYNTAX AcCASFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acCASFileIndex}
::= {acCASFileTable 1}
-- ****************************************
-- acCASFile TABLE
-- ****************************************
AcCASFileEntry ::= SEQUENCE {
acCASFileIndex Unsigned32,
acCASFileName SnmpAdminString
}
acCASFileIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cas Table Indexd.
AC INI-Param: N/A"
::= {acCASFileEntry 1}
acCASFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a pointer to the CAS filename index (0-7). The index
is CASFileName_X. CASFileName_0 through to CASFileName_7 are
the path and names of the CAS protocol configuration files.
AC INI-Param: CASFILENAME"
::= {acCASFileEntry 2}
acSonetSDH OBJECT IDENTIFIER ::= {acPSTNConfiguration 5}
-- ****************************************
-- acSonetSDH table declaration
-- ****************************************
acSonetSDHTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcSonetSDHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acSonetSDH 1}
-- ****************************************
-- acSonetSDH table entry
-- ****************************************
acSonetSDHEntry OBJECT-TYPE
SYNTAX AcSonetSDHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acSonetSDHIndex}
::= {acSonetSDHTable 1}
-- ****************************************
-- acSonetSDH TABLE
-- ****************************************
AcSonetSDHEntry ::= SEQUENCE {
acSonetSDHIndex Unsigned32,
acSonetSDHFbrGrpMappingType INTEGER,
acSonetSDHFbrGrpKlmNumberingScheme INTEGER,
acSonetSDHFbrGrpAPSDirectionMode INTEGER,
acSonetSDHFbrGrpAPSRevertMode INTEGER,
acSonetSDHFbrGrpAPSWaitToRestoreTime Unsigned32
}
acSonetSDHIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fiber groupe index.
AC INI-Param: N/A"
::= {acSonetSDHEntry 1}
acSonetSDHFbrGrpMappingType OBJECT-TYPE
SYNTAX INTEGER {
asynchronousVT15andDS1(0)
,
asynchronousTU12andE1(1)
,
sTS1asynchronousDS3(3)
,
undefined(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects SDH/SONET mapping type (signal label + payload mapping
type) for the PSTN interface.
Generally per Fiber Group.
Single Fiber Group supported in the PSTN interface of TP6310
and TP12610.
Applicable only to the TP-6310 and TP-12610.
Relevant only when acSysTDMBusType = acFRAMERS (2).
0 = Asynchronous VT1.5 and DS1
1 = Asynchronous TU12 and E1
3 = Asynchronous mapping of DS3 in STS1, DS3 channelized to
DS1s
15 = Undefined
Should be in coordination with other parameters as follows:
- sonetMediumType
- acTrunkProtocolType.
Access: Offline.
AC INI-Param: SDHFbrGrp_Mapping_Type"
::= {acSonetSDHEntry 2}
acSonetSDHFbrGrpKlmNumberingScheme OBJECT-TYPE
SYNTAX INTEGER {
numberingScheme-MLK(0)
,
numberingScheme-LMK(1)
,
numberingScheme-KLM(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides VC/VT numbering scheme for STM-1/OC3 fiber group.
Access: Offline.
AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme"
::= {acSonetSDHEntry 3}
acSonetSDHFbrGrpAPSDirectionMode OBJECT-TYPE
SYNTAX INTEGER {
unidirectional(0)
,
bidirectional(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Automatic Protection Switch Unidir/Bidir mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_DirMode"
::= {acSonetSDHEntry 4}
acSonetSDHFbrGrpAPSRevertMode OBJECT-TYPE
SYNTAX INTEGER {
nonRevertive(0)
,
revertive(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Automatic Protection Switch Revertive mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_RevertMode"
::= {acSonetSDHEntry 5}
acSonetSDHFbrGrpAPSWaitToRestoreTime OBJECT-TYPE
SYNTAX Unsigned32 (5..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the APS Wait-to-restore time for the Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_WTR"
::= {acSonetSDHEntry 6}
acPSTNStatus OBJECT IDENTIFIER ::= {acPSTN 2}
acTrunkStatus OBJECT IDENTIFIER ::= {acPSTNStatus 1}
-- ****************************************
-- acTrunkStatus table declaration
-- ****************************************
acTrunkStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcTrunkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acTrunkStatus 1}
-- ****************************************
-- acTrunkStatus table entry
-- ****************************************
acTrunkStatusEntry OBJECT-TYPE
SYNTAX AcTrunkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acTrunkIndex}
::= {acTrunkStatusTable 1}
-- ****************************************
-- acTrunkStatus TABLE
-- ****************************************
AcTrunkStatusEntry ::= SEQUENCE {
acTrunkStatusLedStatusColor INTEGER,
acTrunkStatusLedStatusState INTEGER,
acTrunkStatusChannels OCTET STRING,
acTrunkStatusV5InterfaceNum Integer32,
acTrunkStatusV5LinkID Integer32,
acTrunkStatusDChannel INTEGER,
acTrunkStatusAlarm INTEGER,
acTrunkStatusDchannelActivity INTEGER
}
acTrunkStatusLedStatusColor OBJECT-TYPE
SYNTAX INTEGER {
off(0)
,
red(1)
,
green(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk led status color.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 1}
acTrunkStatusLedStatusState OBJECT-TYPE
SYNTAX INTEGER {
steady(0)
,
blink(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk led status blinking rate.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 2}
acTrunkStatusChannels OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reperesents Trunk's Channels-Status.
Each nibble (half Byte) presents one channel status, as following:
1 - invalid B-Channel.
2 - None.
3 - Open.
4 - Media.
5 - SS7.
6 - HDLC.
7 - DPNSS.
8 - CAS.
9 - Out Of Service.
10 - Maintenance.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 3}
acTrunkStatusV5InterfaceNum OBJECT-TYPE
SYNTAX Integer32 (-1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"V5.2 interface containing this trunk.
-1 means information not available or not relevant.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 4}
acTrunkStatusV5LinkID OBJECT-TYPE
SYNTAX Integer32 (-1..62)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"V5.2 link containing this trunk.
-1 means information not available or not relevant.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 5}
acTrunkStatusDChannel OBJECT-TYPE
SYNTAX INTEGER {
dChannelEstablished(0)
,
dChannelNotEstablished(1)
,
dChannelNotApplicable(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the trunk's D channel status.
0 - dChannelEstablished
1 - dChannelNotEstablished
10 - dChannelNotApplicable.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 6}
acTrunkStatusAlarm OBJECT-TYPE
SYNTAX INTEGER {
greyDisabled(0)
,
greenActive(1)
,
redLosLof(2)
,
blueAis(3)
,
yellowRai(4)
,
orangeDChannel(5)
,
purpleLowerLayerDown(6)
,
darkOrangeNFASAlarm(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the trunk's alarm status.
0 - Disabled.
1 - Active - OK.
2 - LOS/LOF Alarm.
3 - AIS Alarm.
4 - RAI Alram.
5 - D-Channel Alarm.
6 - Lower Layer Down.
7 - NFAS Alarm.
AC INI-Param: N/A"
::= {acTrunkStatusEntry 7}
acTrunkStatusDchannelActivity OBJECT-TYPE
SYNTAX INTEGER {
dChannelActive(0)
,
dChannelStandby(1)
,
dChannelNotApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel backup
procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn<73>t have D-channel defined).
AC INI-Param: N/A"
::= {acTrunkStatusEntry 8}
acDigitalLegs OBJECT IDENTIFIER ::= {acPSTNStatus 2}
-- ****************************************
-- acDigitalLegs table declaration
-- ****************************************
acDigitalLegsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcDigitalLegsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acDigitalLegs 1}
-- ****************************************
-- acDigitalLegs table entry
-- ****************************************
acDigitalLegsEntry OBJECT-TYPE
SYNTAX AcDigitalLegsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acDigitalLegsLegIndex}
::= {acDigitalLegsTable 1}
-- ****************************************
-- acDigitalLegs TABLE
-- ****************************************
AcDigitalLegsEntry ::= SEQUENCE {
acDigitalLegsLegIndex Unsigned32,
acDigitalLegsCallIndex Unsigned32,
acDigitalLegsTrunk Unsigned32,
acDigitalLegsBchannel Unsigned32,
acDigitalLegsEchoCanceller INTEGER,
acDigitalLegsDTMFDetection INTEGER,
acDigitalLegsVoiceVolume Unsigned32,
acDigitalLegsHighPassFilter INTEGER,
acDigitalLegsInputGain INTEGER,
acDigitalLegsDSPDevice Unsigned32,
acDigitalLegsLegName SnmpAdminString
}
acDigitalLegsLegIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Decribes The Digital EndPoint In A Call.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 1}
acDigitalLegsCallIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Decribes The Call which The Digital EndPoint Participant In
It.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 2}
acDigitalLegsTrunk OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Trunk the Leg belong to.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 3}
acDigitalLegsBchannel OBJECT-TYPE
SYNTAX Unsigned32 (0..76500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Bchannel the Leg belong to.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 4}
acDigitalLegsEchoCanceller OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables or Disables the Echo Canceller.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 5}
acDigitalLegsDTMFDetection OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables or Disables the DTMF Detection.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 6}
acDigitalLegsVoiceVolume OBJECT-TYPE
SYNTAX Unsigned32 (0..20000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describs the volume of the voice in dB.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 7}
acDigitalLegsHighPassFilter OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables or Disables theHigh Pass Filter.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 8}
acDigitalLegsInputGain OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Input Gain on the leg in dB.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 9}
acDigitalLegsDSPDevice OBJECT-TYPE
SYNTAX Unsigned32 (0..20000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"describes the DSP Device the Leg connected to.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 10}
acDigitalLegsLegName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A"
::= {acDigitalLegsEntry 11}
acSDHKLMNumberingScheme OBJECT IDENTIFIER ::= {acPSTNStatus 3}
-- ****************************************
-- acSDHKLMNumberingScheme table declaration
-- ****************************************
acSDHKLMNumberingSchemeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcSDHKLMNumberingSchemeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acSDHKLMNumberingScheme 1}
-- ****************************************
-- acSDHKLMNumberingScheme table entry
-- ****************************************
acSDHKLMNumberingSchemeEntry OBJECT-TYPE
SYNTAX AcSDHKLMNumberingSchemeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acSDHKLMNumberingSchemeTrunkIndex}
::= {acSDHKLMNumberingSchemeTable 1}
-- ****************************************
-- acSDHKLMNumberingScheme TABLE
-- ****************************************
AcSDHKLMNumberingSchemeEntry ::= SEQUENCE {
acSDHKLMNumberingSchemeTrunkIndex Unsigned32,
acSDHKLMNumberingSchemeTUG3OrSTS1 Unsigned32,
acSDHKLMNumberingSchemeTUG2OrVTG Unsigned32,
acSDHKLMNumberingSchemeTU12OrVT15 Unsigned32
}
acSDHKLMNumberingSchemeTrunkIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk Number.
AC INI-Param: N/A"
::= {acSDHKLMNumberingSchemeEntry 1}
acSDHKLMNumberingSchemeTUG3OrSTS1 OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
AC INI-Param: N/A"
::= {acSDHKLMNumberingSchemeEntry 2}
acSDHKLMNumberingSchemeTUG2OrVTG OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
AC INI-Param: N/A"
::= {acSDHKLMNumberingSchemeEntry 3}
acSDHKLMNumberingSchemeTU12OrVT15 OBJECT-TYPE
SYNTAX Unsigned32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
AC INI-Param: N/A"
::= {acSDHKLMNumberingSchemeEntry 4}
acFiberGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 4}
acFiberGroupStatusActiveLink OBJECT-TYPE
SYNTAX Unsigned32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber group active link number.
0 - there is no active fiber group link.
AC INI-Param: N/A"
::= {acFiberGroupStatus 1}
acNFASGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 5}
-- ****************************************
-- acNFASGroupStatus table declaration
-- ****************************************
acNFASGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcNFASGroupStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acNFASGroupStatus 1}
-- ****************************************
-- acNFASGroupStatus table entry
-- ****************************************
acNFASGroupStatusEntry OBJECT-TYPE
SYNTAX AcNFASGroupStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acNFASGroupStatusIndex}
::= {acNFASGroupStatusTable 1}
-- ****************************************
-- acNFASGroupStatus TABLE
-- ****************************************
AcNFASGroupStatusEntry ::= SEQUENCE {
acNFASGroupStatusIndex Unsigned32,
acNFASGroupStatusGroupStatus INTEGER,
acNFASGroupStatusPrimaryDChannel Integer32,
acNFASGroupStatusBackupDChannel Integer32,
acNFASGroupStatusAction INTEGER,
acNFASGroupStatusActionResult SnmpAdminString,
acNFASGroupStatusPrimaryDChannelActivity INTEGER,
acNFASGroupStatusBackupDChannelActivity INTEGER
}
acNFASGroupStatusIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NFAS Group Index.
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 1}
acNFASGroupStatusGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
notExists(-1)
,
inService(0)
,
outOfService(1)
,
swactInProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the status of the NFAS group.
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 2}
acNFASGroupStatusPrimaryDChannel OBJECT-TYPE
SYNTAX Integer32 (-1..83)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NFAS Group Configured Primary D-Channel.
-1 means no D-channel Configured.
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 3}
acNFASGroupStatusBackupDChannel OBJECT-TYPE
SYNTAX Integer32 (-1..83)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NFAS Group Configured Backup D-Channel.
-1 means no D-channel Configured.
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 4}
acNFASGroupStatusAction OBJECT-TYPE
SYNTAX INTEGER {
actionDone(0)
,
switchOver(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switches ISDN signaling from active to standby (backup) D-channel
of the NFAS Group.
Access: Instant.
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 5}
acNFASGroupStatusActionResult OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action result. Includes action status (success, failure or notApplicable).
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 6}
acNFASGroupStatusPrimaryDChannelActivity OBJECT-TYPE
SYNTAX INTEGER {
dChannelActive(0)
,
dChannelStandby(1)
,
dChannelNotApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines Primary D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn<73>t have D-channel defined).
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 7}
acNFASGroupStatusBackupDChannelActivity OBJECT-TYPE
SYNTAX INTEGER {
dChannelActive(0)
,
dChannelStandby(1)
,
dChannelNotApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines Backup D-channel status. This parameter is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.
0 = Active channel
1 = Standby channel
2 = Not applicable (this trunk doesn<73>t have D-channel defined).
AC INI-Param: N/A"
::= {acNFASGroupStatusEntry 8}
END