mibs/MIBS/bluecatnetworks/BCN-DHCPV4-MIB
2023-12-05 12:25:34 +01:00

550 lines
15 KiB
Plaintext
Executable File

-- Copyright 2017 BlueCat Networks. All rights reserved.
-- *****************************************************************
-- BCN-DHCPV4-MIB.mib: BlueCat Networks DHCPv4 services
--
--
-- December 2010, Fabian Ischia
--
-- All rights reserved.
--
-- *****************************************************************
BCN-DHCPV4-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
OBJECT-TYPE, Integer32, Unsigned32, Gauge32, IpAddress
FROM SNMPv2-SMI
DisplayString, MacAddress
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
BcnAlarmSeverity
FROM BCN-TC-MIB
bcnServices
FROM BCN-SMI-MIB;
bcnDhcpv4MIB MODULE-IDENTITY
LAST-UPDATED "201012080000Z"
ORGANIZATION "BlueCat Networks"
CONTACT-INFO
"BlueCat Networks. Customer Care.
North America
Call: +1.866.491.2228
Europe
Call: +44.8081.011.306
Other
Call: +1.416.646.8433
Email: support@bluecatnetworks.com"
DESCRIPTION
"This module provides status as well as statistical information
about the DHCPv4 service."
REVISION "201012080000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { bcnDhcpv4 1 }
bcnDhcpv4 OBJECT IDENTIFIER ::= { bcnServices 1 }
-- Organization
bcnDhcpv4Objects OBJECT IDENTIFIER
::= { bcnDhcpv4 2 }
bcnDhcpv4Notification OBJECT IDENTIFIER
::= { bcnDhcpv4 3 }
bcnDhcpv4Conformance OBJECT IDENTIFIER
::= { bcnDhcpv4 4 }
-- Data objects
bcnDhcpv4ServiceStatus OBJECT-IDENTITY
STATUS current
DESCRIPTION
"General state of the DHCPv4 Service."
::= { bcnDhcpv4Objects 1 }
bcnDhcpv4SerOperState OBJECT-TYPE
SYNTAX INTEGER {
running(1),
notRunning(2),
starting(3),
stopping(4),
fault(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of the Service. The possible states are:
running(1) The service is running normally.
notRunning(2) The service is stopped either intentionally (i.e.:
the service is not supposed to run on this node) or
unintentionally (a problem has occurred).
starting(3) The service is in the process of starting, either
for the first time of after an event occurred.
stopping(4) The service is in the process of stopping. Stopping
a service might be necessary after a configuration
change.
fault(5) An error has been detected and the state is undefined.
"
::= { bcnDhcpv4ServiceStatus 1 }
bcnDhcpv4FirstAlertIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address identifying either subnet or pool for which
the available IPs have been exhausted."
::= { bcnDhcpv4ServiceStatus 2 }
bcnDhcpv4LeaseStatsSuccess OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful DHCPv4 leases issued per second."
::= { bcnDhcpv4ServiceStatus 3 }
-- DHCP server statistics
bcnDhcpv4ServiceStatistics OBJECT-IDENTITY
STATUS current
DESCRIPTION
"General state of the DHCPv4 Service."
::= { bcnDhcpv4Objects 2 }
-- DHCP lease table
bcnDhcpv4LeaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcnDhcpv4LeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current lease table."
::= { bcnDhcpv4ServiceStatistics 1 }
bcnDhcpv4LeaseEntry OBJECT-TYPE
SYNTAX BcnDhcpv4LeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A logical row in the bcnDhcpv4LeaseTable."
INDEX { bcnDhcpv4LeaseIP }
::= { bcnDhcpv4LeaseTable 1 }
BcnDhcpv4LeaseEntry ::= SEQUENCE {
bcnDhcpv4LeaseIP IpAddress,
bcnDhcpv4LeaseStartTime Unsigned32,
bcnDhcpv4LeaseEndTime Unsigned32,
bcnDhcpv4LeaseTimeStamp Unsigned32,
bcnDhcpv4LeaseMacAddress MacAddress,
bcnDhcpv4LeaseHostname DisplayString
}
bcnDhcpv4LeaseIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address of the lease."
::= { bcnDhcpv4LeaseEntry 1 }
bcnDhcpv4LeaseStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Start time of the lease."
::= { bcnDhcpv4LeaseEntry 2 }
bcnDhcpv4LeaseEndTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End time of the lease."
::= { bcnDhcpv4LeaseEntry 3 }
bcnDhcpv4LeaseTimeStamp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When failover protocol is being used the timestamp will
indicate the time the peer has either been told the lease expires,
or the expiry time that the peer has acknowledged."
::= { bcnDhcpv4LeaseEntry 4 }
bcnDhcpv4LeaseMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hardware address (MAC address) of this lease."
::= { bcnDhcpv4LeaseEntry 5 }
bcnDhcpv4LeaseHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client hostname of the lease."
::= { bcnDhcpv4LeaseEntry 6 }
-- DHCP Subnet table
bcnDhcpv4SubnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcnDhcpv4SubnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current subnet table."
::= { bcnDhcpv4ServiceStatistics 2 }
bcnDhcpv4SubnetEntry OBJECT-TYPE
SYNTAX BcnDhcpv4SubnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A logical row in the bcnDhcpv4SubnetTable."
INDEX { bcnDhcpv4SubnetIP }
::= { bcnDhcpv4SubnetTable 1 }
BcnDhcpv4SubnetEntry ::= SEQUENCE {
bcnDhcpv4SubnetIP IpAddress,
bcnDhcpv4SubnetMask IpAddress,
bcnDhcpv4SubnetSize Unsigned32,
bcnDhcpv4SubnetFreeAddresses Unsigned32,
bcnDhcpv4SubnetLowThreshold Unsigned32,
bcnDhcpv4SubnetHighThreshold Unsigned32
}
bcnDhcpv4SubnetIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address of the subnet."
::= { bcnDhcpv4SubnetEntry 1 }
bcnDhcpv4SubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP mask of the subnet."
::= { bcnDhcpv4SubnetEntry 2 }
bcnDhcpv4SubnetSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Size of the subnet. The size of the subnet is calculated
as the sum of the sizes of each pool defined within it. The pools
are defined such that the fixed IPs are not contained within them."
::= { bcnDhcpv4SubnetEntry 3 }
bcnDhcpv4SubnetFreeAddresses OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPs addresses available in this subnet."
::= { bcnDhcpv4SubnetEntry 4 }
bcnDhcpv4SubnetLowThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low threshold for available free addresses in this
subnet. If the value for available free addresses in this
subnet becomes equal to or less than this value, a
bcnDhcpv4SubnetLowNotif event is generated for this subnet.
No more bcnDhcpv4SubnetLowNotif events will be generated for
this subnet during this execution of the DHCPv4 server until
the value for available free addresses has exceeded the value
of bcnDhcpv4SubnetHighThreshold."
::= { bcnDhcpv4SubnetEntry 5 }
bcnDhcpv4SubnetHighThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High threshold for available free addresses in this
subnet. If a bcnDhcpv4SubnetLowNotif event was generated and
the value for available free addresses in this subnet has
exceeded this value, a bcnDhcpv4SubnetHighNotif event is
generated for this subnet.
No more bcnDhcpv4SubnetHighNotif events will be generated for
this subnet during this execution of the DHCPv4 server until
another bcnDhcpv4SubnetLowNotif is generated."
::= { bcnDhcpv4SubnetEntry 6 }
-- DHCP pool table
bcnDhcpv4PoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcnDhcpv4PoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current pool table."
::= { bcnDhcpv4ServiceStatistics 3 }
bcnDhcpv4PoolEntry OBJECT-TYPE
SYNTAX BcnDhcpv4PoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A logical row in the bcnDhcpv4PoolTable."
INDEX { bcnDhcpv4PoolStartIP }
::= { bcnDhcpv4PoolTable 1 }
BcnDhcpv4PoolEntry ::= SEQUENCE {
bcnDhcpv4PoolStartIP IpAddress,
bcnDhcpv4PoolEndIP IpAddress,
bcnDhcpv4PoolSubnetIP IpAddress,
bcnDhcpv4PoolSize Unsigned32,
bcnDhcpv4PoolFreeAddresses Unsigned32
}
bcnDhcpv4PoolStartIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Start IP address of this pool."
::= { bcnDhcpv4PoolEntry 1 }
bcnDhcpv4PoolEndIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End IP address of this pool."
::= { bcnDhcpv4PoolEntry 2 }
bcnDhcpv4PoolSubnetIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subnet IP address of the pool."
::= { bcnDhcpv4PoolEntry 3 }
bcnDhcpv4PoolSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size of this pool."
::= { bcnDhcpv4PoolEntry 4 }
bcnDhcpv4PoolFreeAddresses OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of IPs addresses available in this pool."
::= { bcnDhcpv4PoolEntry 5 }
bcnDhcpv4FixedIPTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcnDhcpv4FixedIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of fixed IP addresses for this DHCPv4 server."
::= { bcnDhcpv4ServiceStatistics 4 }
-- DHCP Fixed IP address table
bcnDhcpv4FixedIPEntry OBJECT-TYPE
SYNTAX BcnDhcpv4FixedIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A logical row in the bcnDhcpv4FixedIPTable."
INDEX { bcnDhcpv4FixedIP }
::= { bcnDhcpv4FixedIPTable 1 }
BcnDhcpv4FixedIPEntry ::= SEQUENCE {
bcnDhcpv4FixedIP IpAddress
}
bcnDhcpv4FixedIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "One of the fixed IP addresses in the DHCPv4
configuration."
::= { bcnDhcpv4FixedIPEntry 1 }
-- Notification definitions
bcnDhcpv4NotificationEvents OBJECT IDENTIFIER
::= { bcnDhcpv4Notification 0 }
bcnDhcpv4NotificationData OBJECT IDENTIFIER
::= { bcnDhcpv4Notification 1 }
-- Notification data
bcnDhcpv4AlarmSeverity OBJECT-TYPE
SYNTAX BcnAlarmSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Severity classification for the alarm."
::= { bcnDhcpv4NotificationData 1 }
bcnDhcpv4AlarmInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Descriptive information about the alarm event."
::= { bcnDhcpv4NotificationData 2 }
bcnDhcpv4FailOverState OBJECT-TYPE
SYNTAX INTEGER {
startup (1),
normal (2),
communicationsInterrupted (3),
partnerDown (4),
potentialConflict (5),
recover (6),
paused (7),
shutdown (8),
recoverDone (9),
recoverWait (254)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The state of DHCPv4 failover."
::= { bcnDhcpv4NotificationData 3 }
bcnDhcpv4SubnetAlertIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The IP address identifying a subnet for which the
available IPs have been exhausted."
::= { bcnDhcpv4NotificationData 4 }
-- Notification events
bcnDhcpv4AlarmNotif NOTIFICATION-TYPE
OBJECTS {
bcnDhcpv4SerOperState,
bcnDhcpv4AlarmSeverity,
bcnDhcpv4AlarmInfo
}
STATUS current
DESCRIPTION
"A bcnDhcpv4AlarmNotif signifies that the DHCPv4 service has
transitioned state or a particular event has been detected
on the service."
::= { bcnDhcpv4NotificationEvents 1 }
bcnDhcpv4FailOverNotif NOTIFICATION-TYPE
OBJECTS {
bcnDhcpv4FailOverState
}
STATUS current
DESCRIPTION
"A change of state has been detected on the DHCPv4 failover
mechanism."
::= { bcnDhcpv4NotificationEvents 2 }
bcnDhcpv4SubnetLowNotif NOTIFICATION-TYPE
OBJECTS {
bcnDhcpv4SubnetAlertIpAddr,
bcnDhcpv4SubnetFreeAddresses,
bcnDhcpv4SubnetLowThreshold
}
STATUS current
DESCRIPTION
"This notification signifies that the number of available IPv4
addresses for a particular subnet has fallen below the value
of bcnDhcpv4SubnetLowThreshold for that subnet."
::= { bcnDhcpv4NotificationEvents 3 }
bcnDhcpv4SubnetHighNotif NOTIFICATION-TYPE
OBJECTS {
bcnDhcpv4SubnetAlertIpAddr,
bcnDhcpv4SubnetFreeAddresses,
bcnDhcpv4SubnetHighThreshold
}
STATUS current
DESCRIPTION
"This notification signifies that the number of available IPv4
addresses for a particular subnet has risen above the value
of bcnDhcpv4SubnetHighThreshold for that subnet."
::= { bcnDhcpv4NotificationEvents 4 }
-- Conformance
bcnDhcpv4ServiceCompliances OBJECT IDENTIFIER
::= { bcnDhcpv4Conformance 1 }
bcnDhcpv4ServiceGroups OBJECT IDENTIFIER
::= { bcnDhcpv4Conformance 2 }
bcnDhcpv4ServiceStatusGroup OBJECT-GROUP
OBJECTS {
bcnDhcpv4SerOperState,
bcnDhcpv4FirstAlertIpAddr,
bcnDhcpv4LeaseStatsSuccess
}
STATUS current
DESCRIPTION "Status conformance."
::= { bcnDhcpv4ServiceGroups 1 }
bcnDhcpv4StatisticsGroup OBJECT-GROUP
OBJECTS {
-- bcnDhcpv4LeaseIP,
bcnDhcpv4LeaseStartTime,
bcnDhcpv4LeaseEndTime,
bcnDhcpv4LeaseTimeStamp,
bcnDhcpv4LeaseMacAddress,
bcnDhcpv4LeaseHostname,
-- bcnDhcpv4SubnetIP,
bcnDhcpv4SubnetMask,
bcnDhcpv4SubnetSize,
bcnDhcpv4SubnetFreeAddresses,
bcnDhcpv4SubnetLowThreshold,
bcnDhcpv4SubnetHighThreshold,
bcnDhcpv4PoolSubnetIP,
-- bcnDhcpv4PoolStartIP,
bcnDhcpv4PoolEndIP,
bcnDhcpv4PoolSize,
bcnDhcpv4PoolFreeAddresses,
bcnDhcpv4FixedIP
}
STATUS current
DESCRIPTION "Server statistics conformance."
::= { bcnDhcpv4ServiceGroups 2 }
bcnDhcpv4NotificationEventGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bcnDhcpv4AlarmNotif,
bcnDhcpv4FailOverNotif,
bcnDhcpv4SubnetLowNotif,
bcnDhcpv4SubnetHighNotif
}
STATUS current
DESCRIPTION "Server statistics conformance."
::= { bcnDhcpv4ServiceGroups 3 }
bcnDhcpv4NotificationDataGroup OBJECT-GROUP
OBJECTS {
bcnDhcpv4AlarmSeverity,
bcnDhcpv4AlarmInfo,
bcnDhcpv4FailOverState,
bcnDhcpv4SubnetAlertIpAddr
}
STATUS current
DESCRIPTION "Server statistics conformance."
::= { bcnDhcpv4ServiceGroups 4 }
bcnDhcpv4StatusCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Basic conformance"
MODULE -- This module
MANDATORY-GROUPS {
bcnDhcpv4ServiceStatusGroup, bcnDhcpv4StatisticsGroup,
bcnDhcpv4NotificationEventGroup, bcnDhcpv4NotificationDataGroup }
::= {bcnDhcpv4ServiceCompliances 1 }
END