mibs/MIBS/brocade/BROCADE-NP-TM-STATS-MIB
2023-12-05 12:25:34 +01:00

2089 lines
75 KiB
Plaintext

BROCADE-NP-TM-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64
FROM SNMPv2-SMI -- [RFC2578]
InterfaceIndex
FROM IF-MIB -- [RFC2863]
InetAddress, InetAddressType, InetAddressPrefixLength
FROM INET-ADDRESS-MIB -- [RFC4001]
DisplayString
FROM SNMPv2-TC -- [RFC2579]
platform
FROM FOUNDRY-SN-ROOT-MIB
PortPriorityTC
FROM FOUNDRY-SN-SWITCH-GROUP-MIB;
brocadeNPTMStatsMIB MODULE-IDENTITY
LAST-UPDATED "201109280000Z" -- September 28, 2011
ORGANIZATION "Brocade Communications Systems, Inc."
CONTACT-INFO
"Technical Support Center
130 Holger Way,
San Jose, CA 95134
Email: ipsupport@brocade.com
Phone: 1-800-752-8061
URL: www.brocade.com"
DESCRIPTION
"The MIB module to describe Network Processor (NP) and
Traffic Manager(TM) related statistics information.
Supported Platforms:
- supported on NI XMR/MLX platforms.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information
Base Specification embodies Brocade Communications Systems'
confidential and proprietary intellectual property.
Brocade Communications Systems retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications
Systems makes no warranty, either express or implied, as to the
use, operation, condition, or performance of the specification,
and any unintended consequence it may on the user environment."
REVISION "201111180000Z" -- November 18, 2011
DESCRIPTION "Changes in this revision:
- Updated below mib table descriptions with LAG interface
support:
brcdNPQosStatTable
brcdTMDestUcastQStatTable "
REVISION "201109280000Z" -- September 28, 2011
DESCRIPTION "Changes in this revision:
- Added below new tables
brcdNPQosStatTable
brcdTMDestUcastQStatTable "
REVISION "201009020000Z" -- September 02, 2010
DESCRIPTION
"Initial revision"
::= { platform 2 }
--
-- high level object identifiers
--
brcdNPTMMIBObjects OBJECT IDENTIFIER ::= { brocadeNPTMStatsMIB 1 }
brcdNPStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 1 }
brcdTMStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 2 }
-- the brcdNPStatsTable table
-- The brcdNPStatsTable table contains information of NP related
-- statistics on NI XMR/MLX platform.
brcdNPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdNPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of brcdNPStats entries. This table contains information
of various Network Processor(NP) counters supported by this system."
::= { brcdNPStatisticsInfo 1 }
brcdNPStatsEntry OBJECT-TYPE
SYNTAX BrcdNPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing NP counter information applicable for a
particular interface if the module is physically present."
INDEX { brcdNPStatsIfIndex }
::= { brcdNPStatsTable 1 }
BrcdNPStatsEntry ::= SEQUENCE {
brcdNPStatsIfIndex InterfaceIndex,
brcdNPStatsRxRawGoodPkts Counter64,
brcdNPStatsRxForwardPkts Counter64,
brcdNPStatsRxDiscardPkts Counter64,
brcdNPStatsRxMiscPkts Counter64,
brcdNPStatsRxUnicastPkts Counter64,
brcdNPStatsRxBroadcastPkts Counter64,
brcdNPStatsRxMulticastPkts Counter64,
brcdNPStatsRxSendToTMPkts Counter64,
brcdNPStatsRxBadPkts Counter64,
brcdNPStatsRxLookupUnavailable Counter64,
brcdNPStatsRxACLDrop Counter64,
brcdNPStatsRxPriority0And1Drop Counter64,
brcdNPStatsRxPriority2And3Drop Counter64,
brcdNPStatsRxPriority4And5Drop Counter64,
brcdNPStatsRxPriority6And7Drop Counter64,
brcdNPStatsRxSuppressRPFDrop Counter64,
brcdNPStatsRxRPFDrop Counter64,
brcdNPStatsRxIPv4Pkts Counter64,
brcdNPStatsRxIPv6Pkts Counter64,
brcdNPStatsRxRouteOnlyDrop Counter64,
brcdNPStatsRxIPv6SuppressRPFDrop Counter64,
brcdNPStatsRxIPv6RPFDropCount Counter64,
brcdNPStatsRxIPv4Bytes Counter64,
brcdNPStatsRxIPv6Bytes Counter64,
brcdNPStatsRxPOSCtrlProtocolPkts Counter64,
brcdNPStatsRxPOSLinkDrop Counter64,
brcdNPStatsRxRoutedPktsDrop Counter64,
brcdNPStatsTxSentToMACPkts Counter64,
brcdNPStatsTxRawGoodPkts Counter64,
brcdNPStatsTxSrcPortSupressDrop Counter64,
brcdNPStatsTxBadPktsCnt Counter64,
brcdNPStatsTxUnicastPkts Counter64,
brcdNPStatsTxBroadcastPkts Counter64,
brcdNPStatsTxMulticastPkts Counter64,
brcdNPStatsTxReceiveFromTM Counter64,
brcdNPStatsTxACLDrop Counter64,
brcdNPStatsTxPFCMulticastDrop Counter64,
brcdNPStatsTxPFCMTUExceedDrop Counter64,
brcdNPStatsTxPFCQMAPErrorDrop Counter64,
brcdNPStatsTxIPv4Pkts Counter64,
brcdNPStatsTxIPv6Pkts Counter64,
brcdNPStatsTxIPv4Bytes Counter64,
brcdNPStatsTxIPv6Bytes Counter64,
brcdNPStatsTxPOSCtrlProtocolPkts Counter64,
brcdNPStatsTxPOSLinkDrop Counter64
}
brcdNPStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index as equivalent to ifIndex in MIB II. This is
applicable only for the interfaces that are physically present and
operationally up. "
::= { brcdNPStatsEntry 1 }
brcdNPStatsRxRawGoodPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for good packets received from MAC. In equation,
Rx Raw Good Packets = Rx Unicast Packets + Rx Multicast Packets +
Rx Broadcast Packets
= Rx IPv4 Packets + Rx IPv6 Packets +
Rx Other Packets
= Rx Forward Packets + Rx Discard Packets"
::= { brcdNPStatsEntry 2 }
brcdNPStatsRxForwardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Counter for forwarded packets by packet evaluation engine in the
Ingress. In equation,
Rx Forward Packets = Rx Sent to TM Packets + Rx RL drop packets ."
::= { brcdNPStatsEntry 3 }
brcdNPStatsRxDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets flagged for discard by packet evaluation
engine. In equation,
Rx Discard Packets = ACL drop + TTL drop + route-only drop +
RPF drop + tag mismatch drop
+ VLAN blocking drop + segment filtering drop
+ drop by packet evaluation decisions +
miscellaneous."
::= { brcdNPStatsEntry 4 }
brcdNPStatsRxMiscPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for Miscellaneous Packets Received."
::= { brcdNPStatsEntry 5 }
brcdNPStatsRxUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for unicast packets received."
::= { brcdNPStatsEntry 6 }
brcdNPStatsRxBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for broadcast packets received"
::= { brcdNPStatsEntry 7 }
brcdNPStatsRxMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for multicast packets received."
::= { brcdNPStatsEntry 8 }
brcdNPStatsRxSendToTMPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets sent to TM. This value should be equal to
difference of Rx forward packets and RL drops."
::= { brcdNPStatsEntry 9 }
brcdNPStatsRxBadPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for bad packets in the receiver side. They represent the
packets that have MAC to NP interface errors."
::= { brcdNPStatsEntry 10 }
brcdNPStatsRxLookupUnavailable OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that have been dropped due to unavailability of
the CAM interface for packet lookups."
::= { brcdNPStatsEntry 11 }
brcdNPStatsRxACLDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop counter for ACL drop on the ingress path."
::= { brcdNPStatsEntry 12 }
brcdNPStatsRxPriority0And1Drop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets dropped based on Priority 0,1 in the Ingress."
::= { brcdNPStatsEntry 13 }
brcdNPStatsRxPriority2And3Drop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets dropped based on Priority 2,3 in the Ingress."
::= { brcdNPStatsEntry 14 }
brcdNPStatsRxPriority4And5Drop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets dropped based on Priority 4,5 in the Ingress."
::= { brcdNPStatsEntry 15 }
brcdNPStatsRxPriority6And7Drop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets dropped based on Priority 6,7 in the Ingress."
::= { brcdNPStatsEntry 16 }
brcdNPStatsRxSuppressRPFDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for suppressed RPF drops on the ingress path due to ACL
override."
::= { brcdNPStatsEntry 17 }
brcdNPStatsRxRPFDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for RPF drop in the ingress."
::= { brcdNPStatsEntry 18 }
brcdNPStatsRxIPv4Pkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw packet count that have IPv4 Etype (0x0800) and IP version of
0x4."
::= { brcdNPStatsEntry 19 }
brcdNPStatsRxIPv6Pkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw packet count that have IPv6 Etype (0x86DD) and IP version of
0x6."
::= { brcdNPStatsEntry 20 }
brcdNPStatsRxRouteOnlyDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts packets that have been dropped due to Route-Only
configuration during MAC-DA processing. "
::= { brcdNPStatsEntry 21 }
brcdNPStatsRxIPv6SuppressRPFDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for IPv6 suppressed RFP drops on the ingress path due to
ACL override."
::= { brcdNPStatsEntry 22 }
brcdNPStatsRxIPv6RPFDropCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for IPv6 drop on the ingress."
::= { brcdNPStatsEntry 23 }
brcdNPStatsRxIPv4Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP
version equals 0x4. "
::= { brcdNPStatsEntry 24 }
brcdNPStatsRxIPv6Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP
version equals 0x6. "
::= { brcdNPStatsEntry 25 }
brcdNPStatsRxPOSCtrlProtocolPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of control protocol packets received in POS mode. The object
is supported only on POS interfaces. 0 is returned for others."
::= { brcdNPStatsEntry 26 }
brcdNPStatsRxPOSLinkDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped due to link state in POS mode. The
object is supported only on POS interfaces. 0 is returned for
others. "
::= { brcdNPStatsEntry 27 }
brcdNPStatsRxRoutedPktsDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received IPv4 or IPv6 routed packets that are dropped
because the TTL is 0, or because routing is not enabled on the
given virtual interface. "
::= { brcdNPStatsEntry 28 }
brcdNPStatsTxSentToMACPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets sent to MAC for transmit.In equation,
Tx Sent to MAC = Tx IPv4 Packets + Tx IPv6 Packets + Tx Others
= Tx Raw Good Packets - Tx Source Port Suppression
Drop - Tx ACL drop - Tx RL Drop - Tx Multicast
TTL drop."
::= { brcdNPStatsEntry 29 }
brcdNPStatsTxRawGoodPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets sent to egress processing logic that pass
the initial length checks (min, max, offsets, bad packet etc.)In
equation,
Tx Raw Good Packets = Tx Receive From TM Packets - Tx Bad Packets
= Tx Unicast Packets + Tx Broadcast Packets +
Tx Multicast Packets + Tx Source Port
Suppression Drop. "
::= { brcdNPStatsEntry 30 }
brcdNPStatsTxSrcPortSupressDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped because of transmit source port
suppression."
::= { brcdNPStatsEntry 31 }
brcdNPStatsTxBadPktsCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets dropped in egress logic that fail
the initial length checks (min, max, bad packet etc.)."
::= { brcdNPStatsEntry 32 }
brcdNPStatsTxUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for unicast packets transmitted."
::= { brcdNPStatsEntry 33 }
brcdNPStatsTxBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for broadcast packets transmitted."
::= { brcdNPStatsEntry 34 }
brcdNPStatsTxMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for multicast packets transmitted."
::= { brcdNPStatsEntry 35 }
brcdNPStatsTxReceiveFromTM OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for packets received from TM."
::= { brcdNPStatsEntry 36 }
brcdNPStatsTxACLDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that have been dropped by the outbound ACL
logic."
::= { brcdNPStatsEntry 37 }
brcdNPStatsTxPFCMulticastDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast FID packets that have been dropped by egress
logic that map to the egress queue which is in paused state.
Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and
'NI-MLX-10Gx8-M 8-port 10GbE (M) Module'. 0 is returned for the
rest of the cards."
::= { brcdNPStatsEntry 38 }
brcdNPStatsTxPFCMTUExceedDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that have been dropped by egress logic that
exceeds the MTU of the egress queue (they map to). Supported only
on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and 'NI-MLX-10Gx8-M
8-port 10GbE (M) Module'. 0 is returned for the rest of the
cards."
::= { brcdNPStatsEntry 39 }
brcdNPStatsTxPFCQMAPErrorDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that have been dropped by egress logic that
does not map to any valid egress queue. This object is Supported
only on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and 'NI-MLX-10Gx8-M
8-port 10GbE (M) Module'. 0 is returned for the rest of the
cards."
::= { brcdNPStatsEntry 40 }
brcdNPStatsTxIPv4Pkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IPv4 packets transmitted out the port that have Etype
0x0800 and IPver version equals 0x4)"
::= { brcdNPStatsEntry 41 }
brcdNPStatsTxIPv6Pkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IPv6 packets transmitted out the port that have Etype
0x86DD and IPver version equals 0x6."
::= { brcdNPStatsEntry 42}
brcdNPStatsTxIPv4Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP
version equals 0x4"
::= { brcdNPStatsEntry 43}
brcdNPStatsTxIPv6Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP
version equals 0x6"
::= { brcdNPStatsEntry 44}
brcdNPStatsTxPOSCtrlProtocolPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of control protocol packets sent in POS mode. The object is
supported only for POS interfaces. For others it returns 0."
::= { brcdNPStatsEntry 45 }
brcdNPStatsTxPOSLinkDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped due to link state in POS mode. The
object is supported only for POS interfaces. For others it returns
0."
::= { brcdNPStatsEntry 46 }
-- The brcdNPQosStatTable table contains information of NP Qos related
-- statistics on NI XMR/MLX platform.
brcdNPQosStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdNPQosStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information of Qos counters for the specific
interface per Qos priority. Please refer to the MIB reference
guide for pre-requisites of this table."
::= { brcdNPStatisticsInfo 2 }
brcdNPQosStatEntry OBJECT-TYPE
SYNTAX BrcdNPQosStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Qos statistics information applicable for a
particular interface. "
INDEX { brcdNPQosStatIfIndex, brcdNPQosStatQosPriority }
::= { brcdNPQosStatTable 1 }
BrcdNPQosStatEntry ::= SEQUENCE {
brcdNPQosStatIfIndex InterfaceIndex,
brcdNPQosStatQosPriority PortPriorityTC,
brcdNPQosStatIngressPkts Counter64,
brcdNPQosStatIngressBytes Counter64,
brcdNPQosStatEgressPkts Counter64,
brcdNPQosStatEgressBytes Counter64
}
brcdNPQosStatIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex of the interface. All the interfaces of the LP modules
that are physically present and operationally up will be included
in this table. Starting from NetIron 5.3 release, all deployed
LAG interfaces will also be included in this table."
::= { brcdNPQosStatEntry 1 }
brcdNPQosStatQosPriority OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Qos priority associated with this entry. This is 1-based index.
The priority0 maps to 1, priority1 maps to 2 etc. Priority value
equal to nonPriority(128) is not applicable to this table."
::= { brcdNPQosStatEntry 2 }
brcdNPQosStatIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that have arrived on the specified
interface with a DSCP, EXP or PCP value equal to the value
of the brcdNPQosStatQosPriority object."
::= { brcdNPQosStatEntry 3 }
brcdNPQosStatIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes that have arrived on the specified
interface with a DSCP, EXP or PCP value in the packet
equal to the value of the brcdNPQosStatQosPriority object."
::= { brcdNPQosStatEntry 4 }
brcdNPQosStatEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets leaving the device on the specified
interface with an internal priority value equal to the value
of the brcdNPQosStatQosPriority object. The internal
priority is configuration dependent but generally is a function
of DSCP, EXP or PCP."
::= { brcdNPQosStatEntry 5 }
brcdNPQosStatEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes leaving the device on the specified interface
with an internal priority value equal to the value of the
brcdNPQosStatQosPriority object. The internal priority is
configuration dependent but generally is a function of DSCP, EXP or
PCP."
::= { brcdNPQosStatEntry 6 }
-- the brcdTMStatsInfoGroup
brcdTMStatisticsInfoGroup OBJECT IDENTIFIER ::= { brcdTMStatisticsInfo 1 }
brcdTMPortMappingMaxPorts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum ports that can be supported by the TM on this system"
::= { brcdTMStatisticsInfoGroup 1 }
brcdTMPortMappingUsedPorts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The currently used ports on this system"
::= { brcdTMStatisticsInfoGroup 2 }
brcdTMPortMappingAvailablePorts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available ports on this system"
::= { brcdTMStatisticsInfoGroup 3 }
-- The brcdTMStatsTable table contains information of Traffic Manager(TM)
-- related statistics on NI XMR/MLX platform.
brcdTMStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of brcdTMStats entries. This table contains information of
various Traffic Manager(TM) counters supported by this system."
::= { brcdTMStatisticsInfo 2 }
brcdTMStatsEntry OBJECT-TYPE
SYNTAX BrcdTMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM counter information."
INDEX { brcdTMStatsSlotId,
brcdTMStatsTMDeviceId }
::= { brcdTMStatsTable 1 }
BrcdTMStatsEntry ::=
SEQUENCE {
brcdTMStatsSlotId Unsigned32,
brcdTMStatsTMDeviceId Unsigned32,
brcdTMStatsDescription DisplayString,
brcdTMStatsTotalIngressPktsCnt Counter64,
brcdTMStatsIngressEnqueuePkts Counter64,
brcdTMStatsEgressEnqueuePkts Counter64,
brcdTMStatsIngressEnqueueBytes Counter64,
brcdTMStatsEgressEnqueueBytes Counter64,
brcdTMStatsIngressDequeuePkts Counter64,
brcdTMStatsIngressDequeueBytes Counter64,
brcdTMStatsIngressTotalQDiscardPkts Counter64,
brcdTMStatsIngressTotalQDiscardBytes Counter64,
brcdTMStatsIngressOldestDiscardPkts Counter64,
brcdTMStatsIngressOldestDiscardBytes Counter64,
brcdTMStatsEgressDiscardPkts Counter64,
brcdTMStatsEgressDiscardBytes Counter64
}
brcdTMStatsSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot ID of the LP module, which uniquely identifies a linecard.
The LP module must be physically present and operationally up."
::= { brcdTMStatsEntry 1 }
brcdTMStatsTMDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TM device ID, a number which uniquely identifies the network
processor TM within a linecard in the system."
::= { brcdTMStatsEntry 2 }
brcdTMStatsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the range of ports serviced by the
brcdTMStatsTMDeviceId."
::= { brcdTMStatsEntry 3 }
brcdTMStatsTotalIngressPktsCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering into this traffic manager."
::= { brcdTMStatsEntry 4 }
brcdTMStatsIngressEnqueuePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager."
::= { brcdTMStatsEntry 5 }
brcdTMStatsEgressEnqueuePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering egress queues and forwarded out
on this traffic manager."
::= { brcdTMStatsEntry 6 }
brcdTMStatsIngressEnqueueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port
10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module'
cards. 0 is returned for these cards."
::= { brcdTMStatsEntry 7 }
brcdTMStatsEgressEnqueueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering egress queues and forwarded out on
this traffic manager. This counter is not supported on
'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M
8-port 10GbE (M) Module' cards. 0 is returned for these cards."
::= { brcdTMStatsEntry 8 }
brcdTMStatsIngressDequeuePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets dequeued from ingress queues and forwarded
on this traffic manager."
::= { brcdTMStatsEntry 9 }
brcdTMStatsIngressDequeueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes dequeued from ingress queues and forwarded
on this traffic manager. This counter is not supported on
'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port
10GbE (M) Module' cards."
::= { brcdTMStatsEntry 10 }
brcdTMStatsIngressTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets failing to enter ingress queues on this
traffic manager. This may be due to:
(1) the queue reaching its maximum depth, WRED, or other reasons.
(2) the network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment
filtering."
::= { brcdTMStatsEntry 11 }
brcdTMStatsIngressTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes failing to enter ingress queues on this
traffic manager. This may be due to:
(1) the queue reaching its maximum depth, WRED, or other reasons.
(2) the network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering.
This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE
(D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards."
::= { brcdTMStatsEntry 12 }
brcdTMStatsIngressOldestDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager, but deleted later due to buffer being full."
::= { brcdTMStatsEntry 13 }
brcdTMStatsIngressOldestDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager, but deleted later due to buffer being full. This counter
is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and
'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards. 0 is returned for
these cards."
::= { brcdTMStatsEntry 14 }
brcdTMStatsEgressDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" A count of all packets failing to enter egress queues on this
traffic manager."
::= { brcdTMStatsEntry 15 }
brcdTMStatsEgressDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" A count of all bytes failing to enter egress queues on this
traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D
8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE
(M) Module' cards. 0 is returned for these cards. "
::= { brcdTMStatsEntry 16 }
-- The brcdTMUnicastQStatsTable table contains information of Traffic Manager
-- (TM) Unicast queue related statistics on NI XMR/MLX platform.
brcdTMUcastQStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMUcastQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of TM unicast queue stats entries. This table contains
information of Traffic Manager(TM) unicast queue counters supported
by this system."
::= { brcdTMStatisticsInfo 3 }
brcdTMUcastQStatsEntry OBJECT-TYPE
SYNTAX BrcdTMUcastQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM counter information."
INDEX { brcdTMUcastQStatsSlotId,
brcdTMUcastQStatsTMDeviceId,
brcdTMUcastQStatsDstIfIndex,
brcdTMUcastQStatsPriority }
::= { brcdTMUcastQStatsTable 1 }
BrcdTMUcastQStatsEntry ::=
SEQUENCE {
brcdTMUcastQStatsSlotId Unsigned32,
brcdTMUcastQStatsTMDeviceId Unsigned32,
brcdTMUcastQStatsDstIfIndex InterfaceIndex,
brcdTMUcastQStatsPriority PortPriorityTC,
brcdTMUcastQStatsDescription DisplayString,
brcdTMUcastQStatsEnquePkts Counter64,
brcdTMUcastQStatsEnqueBytes Counter64,
brcdTMUcastQStatsDequePkts Counter64,
brcdTMUcastQStatsDequeBytes Counter64,
brcdTMUcastQStatsTotalQDiscardPkts Counter64,
brcdTMUcastQStatsTotalQDiscardBytes Counter64,
brcdTMUcastQStatsOldestDiscardPkts Counter64,
brcdTMUcastQStatsOldestDiscardBytes Counter64,
brcdTMUcastQStatsWREDDroppedPkts Counter64,
brcdTMUcastQStatsWREDDroppedBytes Counter64,
brcdTMUcastQStatsMaxQDepthSinceLastRead Counter64,
brcdTMUcastQStatsQSize Unsigned32,
brcdTMUcastQStatsCreditCount Unsigned32
}
brcdTMUcastQStatsSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot ID of the LP module, which uniquely identifies a linecard.
The LP module must be physically present and operationally up."
::= { brcdTMUcastQStatsEntry 1 }
brcdTMUcastQStatsTMDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TM device ID, a number which uniquely identifies the network
processor TM within a linecard in the system."
::= { brcdTMUcastQStatsEntry 2 }
brcdTMUcastQStatsDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination interface index. This is applicable only for the
interface on the LP module that is physically present and
operationally up"
::= { brcdTMUcastQStatsEntry 3 }
brcdTMUcastQStatsPriority OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of the packets that will be stored in this queue. This
is 1-based index.
When the tm-max-queues is set to 4, two consecutive priorities
are stored in one unicast queue. In this case, the valid values for
this index are 1, 3, 5 and 7."
::= { brcdTMUcastQStatsEntry 4 }
brcdTMUcastQStatsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the range of ports serviced by the
brcdTMUcastQStatsTMDeviceId and priorities serviced by this
queue."
::= { brcdTMUcastQStatsEntry 5 }
brcdTMUcastQStatsEnquePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager"
::= { brcdTMUcastQStatsEntry 6 }
brcdTMUcastQStatsEnqueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager"
::= { brcdTMUcastQStatsEntry 7 }
brcdTMUcastQStatsDequePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets dequeued from ingress queues and forwarded
on this traffic Manager"
::= { brcdTMUcastQStatsEntry 8 }
brcdTMUcastQStatsDequeBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes dequeued from ingress queues and forwarded on
this traffic manager"
::= { brcdTMUcastQStatsEntry 9 }
brcdTMUcastQStatsTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering."
::= { brcdTMUcastQStatsEntry 10 }
brcdTMUcastQStatsTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering"
::= { brcdTMUcastQStatsEntry 11 }
brcdTMUcastQStatsOldestDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full."
::= { brcdTMUcastQStatsEntry 12 }
brcdTMUcastQStatsOldestDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full"
::= { brcdTMUcastQStatsEntry 13 }
brcdTMUcastQStatsWREDDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMUcastQStatsEntry 14 }
brcdTMUcastQStatsWREDDroppedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMUcastQStatsEntry 15 }
brcdTMUcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue depth since last access to read."
::= { brcdTMUcastQStatsEntry 16 }
brcdTMUcastQStatsQSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current size"
::= { brcdTMUcastQStatsEntry 17 }
brcdTMUcastQStatsCreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current credit count"
::= { brcdTMUcastQStatsEntry 18 }
-- The brcdTMMcastQStatsTable table contains information of Traffic Manager
-- (TM) Multicast queue related statistics on NI XMR/MLX platform.
brcdTMMcastQStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMMcastQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of TM Multicast queue stats entries. This table contains
information of Traffic Manager(TM) Multicast queue counters
supported by this system."
::= { brcdTMStatisticsInfo 4 }
brcdTMMcastQStatsEntry OBJECT-TYPE
SYNTAX BrcdTMMcastQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM counter information."
INDEX { brcdTMMcastQStatsSlotId,
brcdTMMcastQStatsTMDeviceId,
brcdTMMcastQStatsPriority }
::= { brcdTMMcastQStatsTable 1 }
BrcdTMMcastQStatsEntry ::=
SEQUENCE {
brcdTMMcastQStatsSlotId Unsigned32,
brcdTMMcastQStatsTMDeviceId Unsigned32,
brcdTMMcastQStatsPriority INTEGER,
brcdTMMcastQStatsDescription DisplayString,
brcdTMMcastQStatsEnquePkts Counter64,
brcdTMMcastQStatsEnqueBytes Counter64,
brcdTMMcastQStatsDequePkts Counter64,
brcdTMMcastQStatsDequeBytes Counter64,
brcdTMMcastQStatsTotalQDiscardPkts Counter64,
brcdTMMcastQStatsTotalQDiscardBytes Counter64,
brcdTMMcastQStatsOldestDiscardPkts Counter64,
brcdTMMcastQStatsOldestDiscardBytes Counter64,
brcdTMMcastQStatsWREDDroppedPkts Counter64,
brcdTMMcastQStatsWREDDroppedBytes Counter64,
brcdTMMcastQStatsMaxQDepthSinceLastRead Counter64,
brcdTMMcastQStatsQSize Unsigned32,
brcdTMMcastQStatsCreditCount Unsigned32
}
brcdTMMcastQStatsSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot ID of the LP module, which uniquely identifies a linecard.
The LP module must be physically present and operationally up."
::= { brcdTMMcastQStatsEntry 1 }
brcdTMMcastQStatsTMDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TM device ID, a number which uniquely identifies the network
processor TM within a linecard in this system."
::= { brcdTMMcastQStatsEntry 2 }
brcdTMMcastQStatsPriority OBJECT-TYPE
SYNTAX INTEGER {
priority1And2 (1), -- Priority 1 and 2
priority3And4 (3), -- Priority 3 and 4
priority5And6 (5), -- Priority 5 and 6
priority7And8 (7) -- Priority 7 and 8
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of the packets that will be stored in this queue.
Two consecutive priorities are stored in one multicast queue.
There are 4 multicast queues per TM for 8 priorities."
::= { brcdTMMcastQStatsEntry 3 }
brcdTMMcastQStatsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the range of ports serviced by the
brcdTMMcastQStatsTMDeviceId and priorities serviced by this
queue."
::= { brcdTMMcastQStatsEntry 4 }
brcdTMMcastQStatsEnquePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager"
::= { brcdTMMcastQStatsEntry 5 }
brcdTMMcastQStatsEnqueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager"
::= { brcdTMMcastQStatsEntry 6 }
brcdTMMcastQStatsDequePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets dequeued from ingress queues and forwarded
on this traffic Manager"
::= { brcdTMMcastQStatsEntry 7 }
brcdTMMcastQStatsDequeBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes dequeued from ingress queues and forwarded on
this traffic manager"
::= { brcdTMMcastQStatsEntry 8 }
brcdTMMcastQStatsTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering."
::= { brcdTMMcastQStatsEntry 9 }
brcdTMMcastQStatsTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering"
::= { brcdTMMcastQStatsEntry 10 }
brcdTMMcastQStatsOldestDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full."
::= { brcdTMMcastQStatsEntry 11 }
brcdTMMcastQStatsOldestDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full"
::= { brcdTMMcastQStatsEntry 12 }
brcdTMMcastQStatsWREDDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMMcastQStatsEntry 13 }
brcdTMMcastQStatsWREDDroppedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMMcastQStatsEntry 14 }
brcdTMMcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue depth since last access to read."
::= { brcdTMMcastQStatsEntry 15 }
brcdTMMcastQStatsQSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current size"
::= { brcdTMMcastQStatsEntry 16 }
brcdTMMcastQStatsCreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current credit count"
::= { brcdTMMcastQStatsEntry 17 }
-- The brcdTMCpuQStatsTable table contains information of Traffic Manager(TM)
-- CPU queue related statistics on NI XMR/MLX platform.
brcdTMCpuQStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMCpuQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of TM CPU queue stats entries. This table contains
information of Traffic Manager(TM) CPU queue counters supported
by this system."
::= { brcdTMStatisticsInfo 5 }
brcdTMCpuQStatsEntry OBJECT-TYPE
SYNTAX BrcdTMCpuQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM counter information."
INDEX { brcdTMCpuQStatsSlotId,
brcdTMCpuQStatsTMDeviceId,
brcdTMCpuQStatsType,
brcdTMCpuQStatsPriority }
::= { brcdTMCpuQStatsTable 1 }
BrcdTMCpuQStatsEntry ::=
SEQUENCE {
brcdTMCpuQStatsSlotId Unsigned32,
brcdTMCpuQStatsTMDeviceId Unsigned32,
brcdTMCpuQStatsType INTEGER,
brcdTMCpuQStatsPriority PortPriorityTC,
brcdTMCpuQStatsDescription DisplayString,
brcdTMCpuQStatsEnquePkts Counter64,
brcdTMCpuQStatsEnqueBytes Counter64,
brcdTMCpuQStatsDequePkts Counter64,
brcdTMCpuQStatsDequeBytes Counter64,
brcdTMCpuQStatsTotalQDiscardPkts Counter64,
brcdTMCpuQStatsTotalQDiscardBytes Counter64,
brcdTMCpuQStatsOldestDiscardPkts Counter64,
brcdTMCpuQStatsOldestDiscardBytes Counter64,
brcdTMCpuQStatsWREDDroppedPkts Counter64,
brcdTMCpuQStatsWREDDroppedBytes Counter64,
brcdTMCpuQStatsMaxQDepthSinceLastRead Counter64,
brcdTMCpuQStatsQSize Unsigned32,
brcdTMCpuQStatsCreditCount Unsigned32
}
brcdTMCpuQStatsSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot ID of the LP module, which uniquely identifies a linecard.
The LP module must be physically present and operationally up."
::= { brcdTMCpuQStatsEntry 1 }
brcdTMCpuQStatsTMDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TM device ID, a number which uniquely identifies the network
processor TM within a linecard in the system."
::= { brcdTMCpuQStatsEntry 2 }
brcdTMCpuQStatsType OBJECT-TYPE
SYNTAX INTEGER {
cpuQ (1), -- CPU Queue
cpuCopyQ(2), -- CPU Copy Queue
cpuManagementQ (3), -- CPU Management Queue
cpuProtocolQ (4) -- CPU Protocol Queue
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the CPU queue"
::= { brcdTMCpuQStatsEntry 3 }
brcdTMCpuQStatsPriority OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of the packets that will be stored in this queue.
This is 1-based index. The priority 0 maps to 1, priority 1 maps to
2 etc."
::= { brcdTMCpuQStatsEntry 4 }
brcdTMCpuQStatsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the range of ports serviced by the
brcdTMCpuQStatsTMDeviceId."
::= { brcdTMCpuQStatsEntry 5 }
brcdTMCpuQStatsEnquePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager"
::= { brcdTMCpuQStatsEntry 6 }
brcdTMCpuQStatsEnqueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager"
::= { brcdTMCpuQStatsEntry 7 }
brcdTMCpuQStatsDequePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets dequeued from ingress queues and forwarded
on this traffic Manager"
::= { brcdTMCpuQStatsEntry 8 }
brcdTMCpuQStatsDequeBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes dequeued from ingress queues and forwarded on
this traffic manager"
::= { brcdTMCpuQStatsEntry 9 }
brcdTMCpuQStatsTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering."
::= { brcdTMCpuQStatsEntry 10 }
brcdTMCpuQStatsTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering"
::= { brcdTMCpuQStatsEntry 11 }
brcdTMCpuQStatsOldestDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full."
::= { brcdTMCpuQStatsEntry 12 }
brcdTMCpuQStatsOldestDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full"
::= { brcdTMCpuQStatsEntry 13 }
brcdTMCpuQStatsWREDDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMCpuQStatsEntry 14 }
brcdTMCpuQStatsWREDDroppedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMCpuQStatsEntry 15 }
brcdTMCpuQStatsMaxQDepthSinceLastRead OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue depth since last access to read."
::= { brcdTMCpuQStatsEntry 16 }
brcdTMCpuQStatsQSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current size"
::= { brcdTMCpuQStatsEntry 17 }
brcdTMCpuQStatsCreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current credit count"
::= { brcdTMCpuQStatsEntry 18 }
-- The brcdTMMcastStreamQStatsTable table contains information of Traffic Manager
-- (TM) Multicast stream queue related statistics on NI XMR/MLX platform.
brcdTMMcastStreamQStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMMcastStreamQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of TM Multicast stream queue stats entries. This table
contains information of Traffic Manager(TM) Multicast
stream queue counters supported by this system."
::= { brcdTMStatisticsInfo 6 }
brcdTMMcastStreamQStatsEntry OBJECT-TYPE
SYNTAX BrcdTMMcastStreamQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM Multicast stream queue counter information."
INDEX { brcdTMMcastStreamQStatsAddressType,
brcdTMMcastStreamQStatsSource,
brcdTMMcastStreamQStatsGroup,
brcdTMMcastStreamQStatsGroupPrefixLength }
::= { brcdTMMcastStreamQStatsTable 1 }
BrcdTMMcastStreamQStatsEntry ::=
SEQUENCE {
brcdTMMcastStreamQStatsAddressType InetAddressType,
brcdTMMcastStreamQStatsSource InetAddress,
brcdTMMcastStreamQStatsGroup InetAddress,
brcdTMMcastStreamQStatsGroupPrefixLength InetAddressPrefixLength,
brcdTMMcastStreamQStatsPriority INTEGER,
brcdTMMcastStreamQStatsEnquePkts Counter64,
brcdTMMcastStreamQStatsEnqueBytes Counter64,
brcdTMMcastStreamQStatsDequePkts Counter64,
brcdTMMcastStreamQStatsDequeBytes Counter64,
brcdTMMcastStreamQStatsTotalQDiscardPkts Counter64,
brcdTMMcastStreamQStatsTotalQDiscardBytes Counter64,
brcdTMMcastStreamQStatsOldestDiscardPkts Counter64,
brcdTMMcastStreamQStatsOldestDiscardBytes Counter64,
brcdTMMcastStreamQStatsWREDDroppedPkts Counter64,
brcdTMMcastStreamQStatsWREDDroppedBytes Counter64,
brcdTMMcastStreamQStatsMaxQDepthSinceLastRead Counter64,
brcdTMMcastStreamQStatsQSize Unsigned32,
brcdTMMcastStreamQStatsCreditCount Unsigned32
}
brcdTMMcastStreamQStatsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value indicating the address family of the address contained in
brcdTMMcastStreamQStatsSource and brcdTMMcastStreamQStatsGroup. Legal
values correspond to the subset of address families for which multicast
forwarding is supported."
::= { brcdTMMcastStreamQStatsEntry 1 }
brcdTMMcastStreamQStatsSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP address of the multicast stream."
::= { brcdTMMcastStreamQStatsEntry 2 }
brcdTMMcastStreamQStatsGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Group IP address of the multicast stream."
::= { brcdTMMcastStreamQStatsEntry 3 }
brcdTMMcastStreamQStatsGroupPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length in bits of the mask which, when combined with the
corresponding value of brcdTMMcastStreamQStatsGroup, identifies the
groups for which this entry contains queue statistics.
The InetAddressType is given by brcdTMMcastStreamQStatsAddressType.
For values 'ipv4' and 'ipv4z', this object must be in the
range 4..32. For values 'ipv6' and 'ipv6z', this object must be in
the range 8..128."
::= { brcdTMMcastStreamQStatsEntry 4 }
brcdTMMcastStreamQStatsPriority OBJECT-TYPE
SYNTAX INTEGER {
priority1And2 (1), -- Priority 1 and 2
priority3And4 (3), -- Priority 3 and 4
priority5And6 (5), -- Priority 5 and 6
priority7And8 (7) -- Priority 7 and 8
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the packets that will be stored in this queue. Two
consecutive priorities are stored in one multicast stream queue."
::= { brcdTMMcastStreamQStatsEntry 5 }
brcdTMMcastStreamQStatsEnquePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager"
::= { brcdTMMcastStreamQStatsEntry 6 }
brcdTMMcastStreamQStatsEnqueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager"
::= { brcdTMMcastStreamQStatsEntry 7 }
brcdTMMcastStreamQStatsDequePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets dequeued from ingress queues and forwarded
on this traffic Manager"
::= { brcdTMMcastStreamQStatsEntry 8 }
brcdTMMcastStreamQStatsDequeBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes dequeued from ingress queues and forwarded on
this traffic manager"
::= { brcdTMMcastStreamQStatsEntry 9 }
brcdTMMcastStreamQStatsTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering."
::= { brcdTMMcastStreamQStatsEntry 10 }
brcdTMMcastStreamQStatsTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes failing to enter ingress queues on this
traffic manager. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering"
::= { brcdTMMcastStreamQStatsEntry 11 }
brcdTMMcastStreamQStatsOldestDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full."
::= { brcdTMMcastStreamQStatsEntry 12 }
brcdTMMcastStreamQStatsOldestDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager, but deleted afterwards due to buffer full"
::= { brcdTMMcastStreamQStatsEntry 13 }
brcdTMMcastStreamQStatsWREDDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all packets entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMMcastStreamQStatsEntry 14 }
brcdTMMcastStreamQStatsWREDDroppedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of all bytes entering ingress queues on this traffic
manager but dropped due to WRED."
::= { brcdTMMcastStreamQStatsEntry 15 }
brcdTMMcastStreamQStatsMaxQDepthSinceLastRead OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue depth since last access to read."
::= { brcdTMMcastStreamQStatsEntry 16 }
brcdTMMcastStreamQStatsQSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current size"
::= { brcdTMMcastStreamQStatsEntry 17 }
brcdTMMcastStreamQStatsCreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This queue's current credit count"
::= { brcdTMMcastStreamQStatsEntry 18 }
-- The brcdTMCpuQInfoTable table contains information of Traffic Manager(TM)
-- CPU Queues information on NI XMR/MLX platform.
brcdTMCpuQInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMCpuQInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of TM CPU queue information entries. This table contains
information of Traffic Manager(TM) CPU Queue information supported
by this system."
::= { brcdTMStatisticsInfo 7 }
brcdTMCpuQInfoEntry OBJECT-TYPE
SYNTAX BrcdTMCpuQInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM counter information."
INDEX { brcdTMCpuQInfoSlotId,
brcdTMCpuQInfoTMDeviceId }
::= { brcdTMCpuQInfoTable 1 }
BrcdTMCpuQInfoEntry ::=
SEQUENCE {
brcdTMCpuQInfoSlotId Unsigned32,
brcdTMCpuQInfoTMDeviceId Unsigned32,
brcdTMCpuQInfoPriority0QSize Unsigned32,
brcdTMCpuQInfoPriority0CreditCount Unsigned32,
brcdTMCpuQInfoPriority1QSize Unsigned32,
brcdTMCpuQInfoPriority1CreditCount Unsigned32,
brcdTMCpuQInfoPriority2QSize Unsigned32,
brcdTMCpuQInfoPriority2CreditCount Unsigned32,
brcdTMCpuQInfoPriority3QSize Unsigned32,
brcdTMCpuQInfoPriority3CreditCount Unsigned32,
brcdTMCpuQInfoPriority4QSize Unsigned32,
brcdTMCpuQInfoPriority4CreditCount Unsigned32,
brcdTMCpuQInfoPriority5QSize Unsigned32,
brcdTMCpuQInfoPriority5CreditCount Unsigned32,
brcdTMCpuQInfoPriority6QSize Unsigned32,
brcdTMCpuQInfoPriority6CreditCount Unsigned32,
brcdTMCpuQInfoPriority7QSize Unsigned32,
brcdTMCpuQInfoPriority7CreditCount Unsigned32
}
brcdTMCpuQInfoSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot ID of the LP module, which uniquely identifies a linecard.
The LP module must be physically present and operationally up."
::= { brcdTMCpuQInfoEntry 1 }
brcdTMCpuQInfoTMDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TM device ID, a number which uniquely identifies the network
processor TM within a linecard in this system."
::= { brcdTMCpuQInfoEntry 2 }
brcdTMCpuQInfoPriority0QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 0"
::= { brcdTMCpuQInfoEntry 3 }
brcdTMCpuQInfoPriority0CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 0"
::= { brcdTMCpuQInfoEntry 4 }
brcdTMCpuQInfoPriority1QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 1"
::= { brcdTMCpuQInfoEntry 5 }
brcdTMCpuQInfoPriority1CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 1"
::= { brcdTMCpuQInfoEntry 6 }
brcdTMCpuQInfoPriority2QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 2"
::= { brcdTMCpuQInfoEntry 7 }
brcdTMCpuQInfoPriority2CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 2"
::= { brcdTMCpuQInfoEntry 8 }
brcdTMCpuQInfoPriority3QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 3"
::= { brcdTMCpuQInfoEntry 9 }
brcdTMCpuQInfoPriority3CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 3"
::= { brcdTMCpuQInfoEntry 10 }
brcdTMCpuQInfoPriority4QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 4"
::= { brcdTMCpuQInfoEntry 11 }
brcdTMCpuQInfoPriority4CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 4"
::= { brcdTMCpuQInfoEntry 12 }
brcdTMCpuQInfoPriority5QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 5"
::= { brcdTMCpuQInfoEntry 13 }
brcdTMCpuQInfoPriority5CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 5"
::= { brcdTMCpuQInfoEntry 14 }
brcdTMCpuQInfoPriority6QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 6"
::= { brcdTMCpuQInfoEntry 15 }
brcdTMCpuQInfoPriority6CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 6"
::= { brcdTMCpuQInfoEntry 16 }
brcdTMCpuQInfoPriority7QSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the CPU Queue for the priority 7"
::= { brcdTMCpuQInfoEntry 17 }
brcdTMCpuQInfoPriority7CreditCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The credit count of the CPU Queue for the priority 7"
::= { brcdTMCpuQInfoEntry 18 }
-- The brcdTMDestUcastQStatTable table contains information of Traffic Manager(TM)
-- unicast queue counters aggregated across all TMs per destination interface
-- information on NI XMR/MLX platform.
brcdTMDestUcastQStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdTMDestUcastQStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information of Traffic Manager(TM) unicast
queue counters aggregated across all TMs per destination interface
per priority. Entry with priority value equals to 128 includes
per interface statistics aggregated across all priorities.
Please refer to the MIB reference guide for pre-requisites of
this table."
::= { brcdTMStatisticsInfo 8 }
brcdTMDestUcastQStatEntry OBJECT-TYPE
SYNTAX BrcdTMDestUcastQStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing TM unicast queue counters aggregated
across all TMs per a given destination interface per priority."
INDEX { brcdTMDestUcastQStatDestIfIndex, brcdTMDestUcastQStatPriority }
::= { brcdTMDestUcastQStatTable 1 }
BrcdTMDestUcastQStatEntry ::=
SEQUENCE {
brcdTMDestUcastQStatDestIfIndex InterfaceIndex,
brcdTMDestUcastQStatPriority PortPriorityTC,
brcdTMDestUcastQStatEnquePkts Counter64,
brcdTMDestUcastQStatEnqueBytes Counter64,
brcdTMDestUcastQStatDequePkts Counter64,
brcdTMDestUcastQStatDequeBytes Counter64,
brcdTMDestUcastQStatTotalQDiscardPkts Counter64,
brcdTMDestUcastQStatTotalQDiscardBytes Counter64
}
brcdTMDestUcastQStatDestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex of the destination interface. All the interfaces of the
LP modules that are physically present and operationally up will
be included in this table. Starting from NetIron 5.3 release, all
deployed LAG interfaces will also be included in this table."
::= { brcdTMDestUcastQStatEntry 1 }
brcdTMDestUcastQStatPriority OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of the packets that will be stored in this queue.
This is 1-based value. The priority0 maps to 1, priority1 maps
to 2 etc. Priority value equal to nonPriority(128) indicates the
aggregated counters for the given destination port. When the
tm-max-queues is set to 4, two consecutive priorities are
stored in one unicast queue. In this case, the valid values
for this index are 1, 3, 5, 7 and 128."
::= { brcdTMDestUcastQStatEntry 2 }
brcdTMDestUcastQStatEnquePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total aggregated count of all packets entering ingress queue
across all traffic managers."
::= { brcdTMDestUcastQStatEntry 3 }
brcdTMDestUcastQStatEnqueBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total aggregated count of all bytes entering ingress queue
across all traffic managers."
::= { brcdTMDestUcastQStatEntry 4 }
brcdTMDestUcastQStatDequePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total aggregated count of all packets dequeued/transmitted from
ingress queue across all traffic managers."
::= { brcdTMDestUcastQStatEntry 5 }
brcdTMDestUcastQStatDequeBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total aggregated count of all bytes dequeued/transmitted from
ingress queue across all traffic managers."
::= { brcdTMDestUcastQStatEntry 6 }
brcdTMDestUcastQStatTotalQDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For a virtual output queue, total aggregated count across all TMs
of packets that were discarded, either before enqueueing due to
WRED or maximum queue depth reached, or after enqueueing but
before dequeueing due to aging."
::= { brcdTMDestUcastQStatEntry 7 }
brcdTMDestUcastQStatTotalQDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For a virtual output queue, total aggregated count across all TMs
of bytes that were discarded, either before enqueueing due to
WRED or maximum queue depth reached, or after enqueueing but
before dequeueing due to aging."
::= { brcdTMDestUcastQStatEntry 8 }
END