2365 lines
79 KiB
Plaintext
2365 lines
79 KiB
Plaintext
-- *****************************************************************
|
|
-- *** Warning *** This MIB module has been deprecated.
|
|
-- *** Warning *** CERENT-HC-RMON MIB replaces this MIB
|
|
-- *** Warning *** from R5.00 onwards.
|
|
-- *****************************************************************
|
|
|
|
-- *****************************************************************
|
|
-- CERENT-FC-MIB.mib
|
|
-- Cerent Fibre Channel MIB
|
|
--
|
|
-- Copyright (c) 2003 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CERENT-FC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter32,
|
|
Counter64,
|
|
Integer32,
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
CerentPeriod FROM CERENT-TC
|
|
cerentModules,
|
|
cerentRequirements,
|
|
cerentGeneric FROM CERENT-GLOBAL-REGISTRY
|
|
;
|
|
|
|
|
|
cerentFcMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0302110000Z" -- 2003/Feb/11
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO "support@Cisco.com
|
|
|
|
Postal:
|
|
Cisco Systems
|
|
1450 N. McDowell Blvd.
|
|
Petaluma, CA 94954
|
|
|
|
Tel: +1-877-323-7368"
|
|
DESCRIPTION
|
|
"This MIB module defines the managed objects for performance
|
|
monitoring of supported Fibre Channel interfaces."
|
|
|
|
|
|
REVISION "0302110000Z" -- 2003/Feb/11
|
|
DESCRIPTION
|
|
"The initial revision of this MIB."
|
|
::= { cerentModules 100 }
|
|
|
|
|
|
|
|
-- MIB Object Definitions
|
|
|
|
cerentFcMIBObjects OBJECT IDENTIFIER ::= { cerentGeneric 60 }
|
|
|
|
-- groups in this MIB module
|
|
|
|
cerentFc OBJECT IDENTIFIER
|
|
::= { cerentFcMIBObjects 1 }
|
|
|
|
|
|
-- cerentFc
|
|
-- This group deals with FC statistics on the Fibre Channel
|
|
-- interfaces
|
|
|
|
cFcStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CFcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table reports the current values of the Fibre channel
|
|
stats on the supported interfaces."
|
|
::= { cerentFc 1 }
|
|
|
|
cFcStatsEntry OBJECT-TYPE
|
|
SYNTAX CFcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Fibre Channel statisctics on an interface."
|
|
INDEX { ifIndex }
|
|
::= { cFcStatsTable 1 }
|
|
|
|
CFcStatsEntry ::= SEQUENCE {
|
|
cFcStatsInvalidOrdSets Counter32,
|
|
cFcStatsInvalidOrdSetsHigh Counter32,
|
|
cFcStatsEncodingDispErr Counter32,
|
|
cFcStatsEncodingDispErrHigh Counter32,
|
|
cFcStatsInTotalErr Counter32,
|
|
cFcStatsInTotalErrHigh Counter32,
|
|
cFcStatsInFramesTrunc Counter32,
|
|
cFcStatsInFramesTruncHigh Counter32,
|
|
cFcStatsInFramesTooLong Counter32,
|
|
cFcStatsInFramesTooLongHigh Counter32,
|
|
cFcStatsInFramesBadCRC Counter32,
|
|
cFcStatsInFramesBadCRCHigh Counter32,
|
|
cFcStatsInFrames Counter32,
|
|
cFcStatsInFramesHigh Counter32,
|
|
cFcStatsInElements Counter32,
|
|
cFcStatsInElementsHigh Counter32,
|
|
cFcStatsInDiscards Counter32,
|
|
cFcStatsInDiscardsHigh Counter32,
|
|
cFcStatsOutFramesBadCRC Counter32,
|
|
cFcStatsOutFramesBadCRCHigh Counter32,
|
|
cFcStatsOutFrames Counter32,
|
|
cFcStatsOutFramesHigh Counter32,
|
|
cFcStatsOutElements Counter32,
|
|
cFcStatsOutElementsHigh Counter32,
|
|
cFcStatsOutDiscards Counter32,
|
|
cFcStatsOutDiscardsHigh Counter32,
|
|
cFcStatsLinkResets Counter32,
|
|
cFcStatsLinkResetsHigh Counter32,
|
|
cFcStatsGfpInSBitErr Counter32,
|
|
cFcStatsGfpInSBitErrHigh Counter32,
|
|
cFcStatsGfpInMBitErr Counter32,
|
|
cFcStatsGfpInMBitErrHigh Counter32,
|
|
cFcStatsGfpInTypeInvalid Counter32,
|
|
cFcStatsGfpInTypeInvalidHigh Counter32,
|
|
cFcStatsGfpInSBlkCRCErr Counter32,
|
|
cFcStatsGfpInSBlkCRCErrHigh Counter32
|
|
}
|
|
|
|
cFcStatsInvalidOrdSets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of invalid
|
|
ordered sets encountered on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInvalidOrdSetsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 10 }
|
|
|
|
cFcStatsInvalidOrdSetsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
invalid ordered sets on the particular interface.
|
|
|
|
If the value of cFcStatsInvalidOrdSets
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 20 }
|
|
|
|
cFcStatsEncodingDispErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of encoding
|
|
disparity errors encountered on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsEncodingDispErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsEncodingDispErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 30 }
|
|
|
|
cFcStatsEncodingDispErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
encoding disparity errors on the particular interface.
|
|
|
|
If the value of cFcStatsEncodingDispErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsEncodingDispErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 40 }
|
|
|
|
cFcStatsInTotalErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the total number of
|
|
errors encountered on the particular interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInTotalErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInTotalErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 50 }
|
|
|
|
cFcStatsInTotalErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the total number
|
|
of errors encountered on the particular interface.
|
|
|
|
If the value of cFcStatsInTotalErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInTotalErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 60 }
|
|
|
|
|
|
cFcStatsInFramesTrunc OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of fibre
|
|
channel truncated frames received on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInFramesTruncHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesTruncHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 70 }
|
|
|
|
cFcStatsInFramesTruncHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel truncated frames received on this interface.
|
|
|
|
If the value of cFcStatsInFramesTrunc
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesTruncHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 80 }
|
|
|
|
cFcStatsInFramesTooLong OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of
|
|
fibre channel frames received on this interface
|
|
with a length greater than what was agreed to.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInFramesTooLongHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesTooLongHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 90 }
|
|
|
|
cFcStatsInFramesTooLongHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel frames received on this interface
|
|
with a length greater than what was agreed to.
|
|
|
|
If the value of cFcStatsInFramesTooLong
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesTooLongHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 100 }
|
|
|
|
cFcStatsInFramesBadCRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of frames received
|
|
with invalid CRC, on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInFramesBadCRCHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 110 }
|
|
|
|
cFcStatsInFramesBadCRCHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number of
|
|
frames received with invalid CRC, on this interface.
|
|
|
|
If the value of cFcStatsInFramesBadCRC
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesBadCRCHigh, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 120 }
|
|
|
|
cFcStatsInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
fibre channel frames received on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInFramesHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 130 }
|
|
|
|
cFcStatsInFramesHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel frames received on this interface.
|
|
|
|
If the value of cFcStatsInFrames
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInFramesHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 140 }
|
|
|
|
cFcStatsInElements OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
received bytes on the particular interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInElementsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInElementsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 150 }
|
|
|
|
cFcStatsInElementsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
received bytes on the particular interface.
|
|
|
|
If the value of cFcStatsInElements
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInElementsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 160 }
|
|
|
|
cFcStatsInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
received frames on this interface that were
|
|
discarded.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsInDiscardsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 170 }
|
|
|
|
cFcStatsInDiscardsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
received frames discarded on the particular interface.
|
|
|
|
If the value of cFcStatsInDiscards
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsInDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 180 }
|
|
|
|
cFcStatsOutFramesBadCRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of frames
|
|
transmitted with invalid CRC, on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsOutFramesBadCRCHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 190 }
|
|
|
|
cFcStatsOutFramesBadCRCHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
frames transmitted with invalid CRC, on this interface.
|
|
|
|
If the value of cFcStatsOutFramesBadCRC
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 200 }
|
|
|
|
cFcStatsOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of
|
|
fibre channel frames transmitted on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsOutFramesHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutFramesHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 210 }
|
|
|
|
cFcStatsOutFramesHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number
|
|
of fibre channel frames transmitted on this interface.
|
|
|
|
If the value of cFcStatsOutFrames
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutFramesHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 220 }
|
|
|
|
cFcStatsOutElements OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
trasmitted bytes on the particular interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsOutElementsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutElementsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 230 }
|
|
|
|
cFcStatsOutElementsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
transmitted bytes on the particular interface.
|
|
|
|
If the value of cFcStatsOutElements
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutElementsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 240 }
|
|
|
|
cFcStatsOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of transmitted
|
|
frames on this interface that were discarded.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsOutDiscardsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 250 }
|
|
|
|
cFcStatsOutDiscardsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of
|
|
the number of transmitted
|
|
frames on this interface that were discarded.
|
|
|
|
If the value of cFcStatsOutDiscards
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsOutDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 260 }
|
|
|
|
cFcStatsLinkResets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
link resets detected on this particular interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsLinkResetsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsLinkResetsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 270 }
|
|
|
|
cFcStatsLinkResetsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
link resets detected on the particular interface.
|
|
|
|
If the value of cFcStatsLinkResets
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsLinkResetsHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 280 }
|
|
|
|
cFcStatsGfpInSBitErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
single bit GFP errors received on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsGfpInSBitErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInSBitErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 290 }
|
|
|
|
cFcStatsGfpInSBitErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
single bit GFP errors received on this interface.
|
|
|
|
If the value of cFcStatsGfpInSBitErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInSBitErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 300 }
|
|
|
|
cFcStatsGfpInMBitErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
multi bit GFP errors received on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsGfpInMBitErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInMBitErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 310 }
|
|
|
|
cFcStatsGfpInMBitErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
multi bit GFP errors received on this interface.
|
|
|
|
If the value of cFcStatsGfpInMBitErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInMBitErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 320 }
|
|
|
|
cFcStatsGfpInTypeInvalid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of GFP frames
|
|
received on this interface with an invalid type.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsGfpInTypeInvalidHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 330 }
|
|
|
|
cFcStatsGfpInTypeInvalidHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number
|
|
of GFP frames received on this interface with an invalid
|
|
type.
|
|
|
|
If the value of cFcStatsGfpInTypeInvalid
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 340 }
|
|
|
|
cFcStatsGfpInSBlkCRCErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
GFP super block CRC errors received on this interface.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcStatsGfpInSblkCRCErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 350 }
|
|
|
|
cFcStatsGfpInSBlkCRCErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
GFP super block CRC errors received on the particular
|
|
interface.
|
|
|
|
If the value of cFcStatsGfpInSblkCRCErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter."
|
|
::= { cFcStatsEntry 360 }
|
|
|
|
|
|
-- Fibre Channel HC table (High Capacity 64 bit counters)
|
|
|
|
cFcStatsHCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CFcStatsHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table reports GFP stats on supported Fibre Channel
|
|
interfaces."
|
|
::= { cerentFc 2 }
|
|
|
|
cFcStatsHCEntry OBJECT-TYPE
|
|
SYNTAX CFcStatsHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Fibre channel statisctics on an interface.
|
|
All the counters in this table are 64 bits counters and
|
|
are useful only to SNMP v2 and v3 managers."
|
|
INDEX { ifIndex }
|
|
::= { cFcStatsHCTable 1 }
|
|
|
|
CFcStatsHCEntry ::= SEQUENCE {
|
|
cFcStatsInvalidOrdSetsHC Counter64,
|
|
cFcStatsEncodingDispErrHC Counter64,
|
|
cFcStatsInTotalErrHC Counter64,
|
|
cFcStatsInFramesTruncHC Counter64,
|
|
cFcStatsInFramesTooLongHC Counter64,
|
|
cFcStatsInFramesBadCRCHC Counter64,
|
|
cFcStatsInFramesHC Counter64,
|
|
cFcStatsInElementsHC Counter64,
|
|
cFcStatsInDiscardsHC Counter64,
|
|
cFcStatsOutFramesBadCRCHC Counter64,
|
|
cFcStatsOutFramesHC Counter64,
|
|
cFcStatsOutElementsHC Counter64,
|
|
cFcStatsOutDiscardsHC Counter64,
|
|
cFcStatsLinkResetsHC Counter64,
|
|
cFcStatsGfpInSBitErrHC Counter64,
|
|
cFcStatsGfpInMBitErrHC Counter64,
|
|
cFcStatsGfpInTypeInvalidHC Counter64,
|
|
cFcStatsGfpInSBlkCRCErrHC Counter64
|
|
}
|
|
|
|
cFcStatsInvalidOrdSetsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of invalid ordered
|
|
sets encountered on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 10 }
|
|
|
|
cFcStatsEncodingDispErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of encoding
|
|
disparity errors encountered on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 20 }
|
|
|
|
cFcStatsInTotalErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the total number of
|
|
errors encountered on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 30 }
|
|
|
|
cFcStatsInFramesTruncHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of fibre channel
|
|
truncated frames received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 40 }
|
|
|
|
cFcStatsInFramesTooLongHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of fibre channel
|
|
frames received with a length greater than what was agreed
|
|
to on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 50 }
|
|
|
|
cFcStatsInFramesBadCRCHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of frames received
|
|
with invalid CRC, on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 60 }
|
|
|
|
cFcStatsInFramesHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
fibre channel frames received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 70 }
|
|
|
|
cFcStatsInElementsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
bytes received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 80 }
|
|
|
|
cFcStatsInDiscardsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
received frames discarded on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 90 }
|
|
|
|
cFcStatsOutFramesBadCRCHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of transmitted
|
|
frames with invalid CRC, on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 100 }
|
|
|
|
cFcStatsOutFramesHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
fibre channel frames transmitted on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 110 }
|
|
|
|
cFcStatsOutElementsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
bytes transmitted on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 120 }
|
|
|
|
cFcStatsOutDiscardsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of transmitted
|
|
frames on this interface that were discarded.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 130 }
|
|
|
|
cFcStatsLinkResetsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
link resets detected on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 140 }
|
|
|
|
cFcStatsGfpInSBitErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of single bit
|
|
GFP errors received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 150 }
|
|
|
|
cFcStatsGfpInMBitErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of multi bit
|
|
GFP errors received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 160 }
|
|
|
|
cFcStatsGfpInTypeInvalidHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of GFP frames received
|
|
on this interface with an invalid type.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 170 }
|
|
|
|
cFcStatsGfpInSBlkCRCErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of GFP super block
|
|
CRC errors received on this interface.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcStatsHCEntry 180 }
|
|
|
|
|
|
-- cFcHistTable
|
|
|
|
cFcHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CFcHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table reports fibre channel stats on supported
|
|
interfaces for previous intervals."
|
|
::= { cerentFc 3 }
|
|
|
|
cFcHistEntry OBJECT-TYPE
|
|
SYNTAX CFcHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Fibre Channel stats history on an
|
|
interface."
|
|
INDEX { ifIndex, cFcHistIntervalType,
|
|
cFcHistIntervalNum }
|
|
::= { cFcHistTable 1 }
|
|
|
|
CFcHistEntry ::= SEQUENCE {
|
|
cFcHistIntervalType CerentPeriod,
|
|
cFcHistIntervalNum INTEGER,
|
|
cFcHistInvalidOrdSets Counter32,
|
|
cFcHistInvalidOrdSetsHigh Counter32,
|
|
cFcHistEncodingDispErr Counter32,
|
|
cFcHistEncodingDispErrHigh Counter32,
|
|
cFcHistInTotalErr Counter32,
|
|
cFcHistInTotalErrHigh Counter32,
|
|
cFcHistInFramesTrunc Counter32,
|
|
cFcHistInFramesTruncHigh Counter32,
|
|
cFcHistInFramesTooLong Counter32,
|
|
cFcHistInFramesTooLongHigh Counter32,
|
|
cFcHistInFramesBadCRC Counter32,
|
|
cFcHistInFramesBadCRCHigh Counter32,
|
|
cFcHistInFrames Counter32,
|
|
cFcHistInFramesHigh Counter32,
|
|
cFcHistInElements Counter32,
|
|
cFcHistInElementsHigh Counter32,
|
|
cFcHistInDiscards Counter32,
|
|
cFcHistInDiscardsHigh Counter32,
|
|
cFcHistOutFramesBadCRC Counter32,
|
|
cFcHistOutFramesBadCRCHigh Counter32,
|
|
cFcHistOutFrames Counter32,
|
|
cFcHistOutFramesHigh Counter32,
|
|
cFcHistOutElements Counter32,
|
|
cFcHistOutElementsHigh Counter32,
|
|
cFcHistOutDiscards Counter32,
|
|
cFcHistOutDiscardsHigh Counter32,
|
|
cFcHistLinkResets Counter32,
|
|
cFcHistLinkResetsHigh Counter32,
|
|
cFcHistGfpInSBitErr Counter32,
|
|
cFcHistGfpInSBitErrHigh Counter32,
|
|
cFcHistGfpInMBitErr Counter32,
|
|
cFcHistGfpInMBitErrHigh Counter32,
|
|
cFcHistGfpInTypeInvalid Counter32,
|
|
cFcHistGfpInTypeInvalidHigh Counter32,
|
|
cFcHistGfpInSBlkCRCErr Counter32,
|
|
cFcHistGfpInSBlkCRCErrHigh Counter32
|
|
|
|
}
|
|
|
|
cFcHistIntervalType OBJECT-TYPE
|
|
SYNTAX CerentPeriod
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of interval for which the
|
|
data is being obtained."
|
|
::= { cFcHistEntry 10 }
|
|
|
|
cFcHistIntervalNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of the particular interval
|
|
for which the data is being obtained."
|
|
|
|
::= { cFcHistEntry 20 }
|
|
|
|
cFcHistInvalidOrdSets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of invalid
|
|
ordered sets on the particular interface during this
|
|
sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter. The high word value is given by
|
|
cFcHistInvalidOrdSetsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInvalidOrdSetsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 30 }
|
|
|
|
cFcHistInvalidOrdSetsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
invalid ordered sets on the particular interface during
|
|
this sampling interval.
|
|
|
|
If the value of cFcHistInvalidOrdSets
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInvalidOrdSetsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 40 }
|
|
|
|
cFcHistEncodingDispErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of encoding
|
|
disparity errors on the particular interface during
|
|
this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistEncodingDispErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistEncodingDispErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 50 }
|
|
|
|
cFcHistEncodingDispErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
encoding disparity errors on the particular interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistEncodingDispErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistEncodingDispErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 60 }
|
|
|
|
cFcHistInTotalErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the total number of
|
|
errors encountered on this interface during
|
|
this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInTotalErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInTotalErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 70 }
|
|
|
|
cFcHistInTotalErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the total
|
|
number of errors encountered on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInTotalErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInTotalErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 80 }
|
|
|
|
|
|
cFcHistInFramesTrunc OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of fibre channel
|
|
truncated frames received on the particular interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInFramesTruncHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesTruncHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 90 }
|
|
|
|
cFcHistInFramesTruncHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel truncated frames received on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInFramesTrunc
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesTruncHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 100 }
|
|
|
|
cFcHistInFramesTooLong OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of fibre
|
|
channel frames received on this interface
|
|
during this sampling interval with a length greater
|
|
than what was agreed to.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInFramesTooLongHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesTooLongHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 110 }
|
|
|
|
cFcHistInFramesTooLongHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel frames received on this interface
|
|
during this sampling interval with a length greater
|
|
than what was agreed to.
|
|
|
|
If the value of cFcHistInFramesTooLong
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesTooLongHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 120 }
|
|
|
|
cFcHistInFramesBadCRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
frames received with invalid CRC, on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInFramesBadCRCHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 130 }
|
|
|
|
cFcHistInFramesBadCRCHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
frames received with invalid CRC, on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInFramesBadCRC
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesBadCRCHigh, which is a 64 bit counter."
|
|
::= { cFcHistEntry 140 }
|
|
|
|
cFcHistInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
fibre channel frames received on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInFramesHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 150 }
|
|
|
|
cFcHistInFramesHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
fibre channel frames received on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInFrames
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInFramesHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 160 }
|
|
|
|
cFcHistInElements OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
received bytes on the particular interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInElementsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInElementsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 170 }
|
|
|
|
cFcHistInElementsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
received bytes on the particular interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInElements
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInElementsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 180 }
|
|
|
|
cFcHistInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the the number of
|
|
received frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistInDiscardsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 190 }
|
|
|
|
cFcHistInDiscardsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number
|
|
of received frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistInDiscards
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistInDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 200 }
|
|
|
|
cFcHistOutFramesBadCRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the the number of
|
|
frames transmitted with invalid CRC, on this
|
|
interface, during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistOutFramesBadCRCHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 210 }
|
|
|
|
cFcHistOutFramesBadCRCHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
frames transmitted with invalid CRC, on this
|
|
interface, during this sampling interval.
|
|
|
|
If the value of cFcHistOutFramesBadCRC
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutFramesBadCRCHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 220 }
|
|
|
|
cFcHistOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
frames transmitted on the particular interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistOutFramesHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutFramesHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 230 }
|
|
|
|
cFcHistOutFramesHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
frames transmitted on the particular interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistOutFrames
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutFramesHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 240 }
|
|
|
|
cFcHistOutElements OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
trasmitted bytes on the particular interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistOutElementsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutElementsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 250 }
|
|
|
|
cFcHistOutElementsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number
|
|
of transmitted bytes on the particular interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistOutElements
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutElementsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 260 }
|
|
|
|
cFcHistOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of
|
|
transmitted frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistOutDiscardsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 270 }
|
|
|
|
cFcHistOutDiscardsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
transmitted frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistOutDiscards
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistOutDiscardsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 280 }
|
|
|
|
cFcHistLinkResets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
link resets detected on the particular interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistLinkResetsHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistLinkResetsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 290 }
|
|
|
|
cFcHistLinkResetsHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
link resets detected on the particular interface
|
|
during this interval.
|
|
|
|
If the value of cFcHistLinkResets
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistLinkResetsHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 300 }
|
|
|
|
cFcHistGfpInSBitErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of
|
|
single bit GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistGfpInSBitErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInSBitErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 310 }
|
|
|
|
cFcHistGfpInSBitErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number of
|
|
single bit GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistGfpInSBitErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInSBitErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 320 }
|
|
|
|
cFcHistGfpInMBitErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the number of
|
|
multi bit GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistGfpInMBitErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInMBitErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 330 }
|
|
|
|
cFcHistGfpInMBitErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
multi bit GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistGfpInMBitErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInMBitErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 340 }
|
|
|
|
cFcHistGfpInTypeInvalid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of received
|
|
GFP frames with an invalid type on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistGfpInTypeInvalidHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 350 }
|
|
|
|
cFcHistGfpInTypeInvalidHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value of the number
|
|
of received GFP frames with an invalid type on this
|
|
interface, during this sampling interval.
|
|
|
|
If the value of cFcHistGfpInTypeInvalid
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 360 }
|
|
|
|
cFcHistGfpInSBlkCRCErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the value of the number of
|
|
super block CRC GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This object only shows the lower word value of
|
|
the counter.The high word value is given by
|
|
cFcHistGfpInSblkCRCErrHigh.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 370 }
|
|
|
|
cFcHistGfpInSBlkCRCErrHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the higher word value the number of
|
|
super block CRC GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
If the value of cFcHistGfpInSblkCRCErr
|
|
is greater than 4,294,967,295, the higher word value will
|
|
be stored in this object.
|
|
|
|
SNMP v2c or v3 managers can directly use
|
|
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter."
|
|
::= { cFcHistEntry 380 }
|
|
|
|
|
|
-- Fibre Channel HC table (High Capacity 64 bit counters)
|
|
|
|
cFcHistHCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CFcHistHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table reports history of fibre channel stats on
|
|
supported Fibre Channel interfaces."
|
|
::= { cerentFc 4 }
|
|
|
|
cFcHistHCEntry OBJECT-TYPE
|
|
SYNTAX CFcHistHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of history of Fibre channel statisctics
|
|
on an interface.
|
|
All the counters in this table are 64 bits counters and
|
|
are useful only to SNMP v2 and v3 managers."
|
|
INDEX { ifIndex, cFcHistIntervalType,cFcHistIntervalNum}
|
|
::= { cFcHistHCTable 1 }
|
|
|
|
CFcHistHCEntry ::= SEQUENCE {
|
|
cFcHistInvalidOrdSetsHC Counter64,
|
|
cFcHistEncodingDispErrHC Counter64,
|
|
cFcHistInTotalErrHC Counter64,
|
|
cFcHistInFramesTruncHC Counter64,
|
|
cFcHistInFramesTooLongHC Counter64,
|
|
cFcHistInFramesBadCRCHC Counter64,
|
|
cFcHistInFramesHC Counter64,
|
|
cFcHistInElementsHC Counter64,
|
|
cFcHistInDiscardsHC Counter64,
|
|
cFcHistOutFramesBadCRCHC Counter64,
|
|
cFcHistOutFramesHC Counter64,
|
|
cFcHistOutElementsHC Counter64,
|
|
cFcHistOutDiscardsHC Counter64,
|
|
cFcHistLinkResetsHC Counter64,
|
|
cFcHistGfpInSBitErrHC Counter64,
|
|
cFcHistGfpInMBitErrHC Counter64,
|
|
cFcHistGfpInTypeInvalidHC Counter64,
|
|
cFcHistGfpInSBlkCRCErrHC Counter64
|
|
}
|
|
|
|
cFcHistInvalidOrdSetsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of invalid ordered
|
|
sets encountered on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 10 }
|
|
|
|
cFcHistEncodingDispErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of encoding
|
|
disparity errors encountered on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 20 }
|
|
|
|
cFcHistInTotalErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the total number of
|
|
errors encountered on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 30 }
|
|
|
|
|
|
cFcHistInFramesTruncHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of fibre channel
|
|
truncated frames received on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 40 }
|
|
|
|
cFcHistInFramesTooLongHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of fibre channel
|
|
frames received on this interface during this sampling
|
|
interval, with a length greater than what was
|
|
agreed to.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 50 }
|
|
|
|
cFcHistInFramesBadCRCHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of frames
|
|
received with an invalid CRC, on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 60 }
|
|
|
|
cFcHistInFramesHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
frames received on this interface, during this
|
|
sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 70 }
|
|
|
|
cFcHistInElementsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
bytes received on this interface during this
|
|
sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 80 }
|
|
|
|
cFcHistInDiscardsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
received frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 90 }
|
|
|
|
cFcHistOutFramesBadCRCHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
frames transmitted with an invalid CRC,
|
|
on this interface during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 100 }
|
|
|
|
cFcHistOutFramesHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
fibre channel frames transmitted on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 110 }
|
|
|
|
cFcHistOutElementsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
bytes received on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 120 }
|
|
|
|
cFcHistOutDiscardsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
transmitted frames discarded on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 130 }
|
|
|
|
cFcHistLinkResetsHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
link resets detected on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 140 }
|
|
|
|
cFcHistGfpInSBitErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of single bit
|
|
GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 150 }
|
|
|
|
cFcHistGfpInMBitErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of multi bit
|
|
GFP errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 160 }
|
|
|
|
cFcHistGfpInTypeInvalidHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
GFP frames with invalid type received on this
|
|
interface, during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 170 }
|
|
|
|
cFcHistGfpInSBlkCRCErrHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of GFP super
|
|
block CRC errors received on this interface
|
|
during this sampling interval.
|
|
|
|
This is a High Capacity ( 64 bit ) counter."
|
|
::= { cFcHistHCEntry 180 }
|
|
|
|
|
|
-- The cFcAlarm Table
|
|
|
|
cFcAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CFcAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of cFcAlarm entries."
|
|
::= { cerentFc 5 }
|
|
|
|
cFcAlarmEntry OBJECT-TYPE
|
|
SYNTAX CFcAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of parameters that set up a periodic checking
|
|
for cFcAlarm conditions."
|
|
INDEX { cFcAlarmIndex }
|
|
::= { cFcAlarmTable 1 }
|
|
|
|
CFcAlarmEntry ::= SEQUENCE {
|
|
cFcAlarmIndex INTEGER,
|
|
cFcAlarmInterval INTEGER,
|
|
cFcAlarmVariable OBJECT IDENTIFIER,
|
|
cFcAlarmSampleType INTEGER,
|
|
cFcAlarmValue Counter32,
|
|
cFcAlarmValueHigh Counter32,
|
|
cFcAlarmStartupAlarm INTEGER,
|
|
cFcAlarmRisingThreshold Integer32,
|
|
cFcAlarmRisingThresholdHigh Integer32,
|
|
cFcAlarmFallingThreshold Integer32,
|
|
cFcAlarmFallingThresholdHigh Integer32,
|
|
cFcAlarmStatus INTEGER
|
|
}
|
|
|
|
cFcAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
cFcAlarm table. Each such entry defines a
|
|
diagnostic sample at a particular interval
|
|
for an object on the device."
|
|
::= { cFcAlarmEntry 10 }
|
|
|
|
cFcAlarmInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds over which the data is
|
|
sampled and compared with the rising and falling
|
|
thresholds. When setting this variable, care
|
|
should be taken in the case of deltaValue
|
|
sampling - the interval should be set short enough
|
|
that the sampled variable is very unlikely to
|
|
increase or decrease by more than 2^31 - 1 during
|
|
a single sampling interval."
|
|
::= { cFcAlarmEntry 20 }
|
|
|
|
cFcAlarmVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the particular variable to
|
|
be sampled."
|
|
::= { cFcAlarmEntry 30 }
|
|
|
|
cFcAlarmSampleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
absoluteValue(1),
|
|
deltaValue(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method of sampling the selected variable and
|
|
calculating the value to be compared against the
|
|
thresholds. If the value of this object is
|
|
absoluteValue(1), the value of the selected variable
|
|
will be compared directly with the thresholds at the
|
|
end of the sampling interval. If the value of this
|
|
object is deltaValue(2), the value of the selected
|
|
variable at the last sample will be subtracted from
|
|
the current value, and the difference compared with
|
|
the thresholds."
|
|
::= { cFcAlarmEntry 40 }
|
|
|
|
cFcAlarmValue OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the statistic during the last sampling
|
|
period. For example, if the sample type is
|
|
deltaValue, this value will be the difference
|
|
between the samples at the beginning and end of the
|
|
period. If the sample type is absoluteValue, this
|
|
value will be the sampled value at the end of the
|
|
period. This is the value that is compared with the
|
|
rising and falling thresholds.
|
|
|
|
This object only shows the lower word value.
|
|
The high word value is given by cFcAlarmValueHigh.
|
|
|
|
The value during the current sampling period is not
|
|
made available until the period is completed and will
|
|
remain available until the next period completes."
|
|
::= { cFcAlarmEntry 50 }
|
|
|
|
cFcAlarmValueHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The higher word value of the statistic during the
|
|
last sampling period.
|
|
|
|
If the value of cFcAlarmValue
|
|
is greater than 4,294,967,295, the higher word
|
|
value will be stored in this object."
|
|
::= { cFcAlarmEntry 60 }
|
|
|
|
cFcAlarmStartupAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
risingcFcAlarm(1),
|
|
fallingcFcAlarm(2),
|
|
risingOrFallingcFcAlarm(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cFcAlarm that may be sent when this entry is
|
|
set to valid.
|
|
|
|
If the first sample after this entry
|
|
becomes valid is greater than or equal to the
|
|
risingThreshold and cFcAlarmStartupAlarm is equal to
|
|
risingcFcAlarm(1) or risingOrFallingAlarm(3), then a
|
|
single rising cFcAlarm will be generated. If the
|
|
sample after this entry becomes valid is less than
|
|
or equal to the fallingThreshold and
|
|
cFcAlarmStartupAlarm is equal to fallingAlarm(2) or
|
|
risingOrFallingcFcAlarm(3), then a single falling
|
|
alarm will be generated."
|
|
::= { cFcAlarmEntry 70 }
|
|
|
|
cFcAlarmRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is greater than or equal to
|
|
this threshold, and the value at the last sampling
|
|
interval was less than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is greater than or equal to this
|
|
threshold and the associated cFcAlarmStartupAlarm is
|
|
equal to risingcFcAlarm(1) or risingOrFallingAlarm(3).
|
|
|
|
After a rising event is generated, another such event
|
|
will not be generated until the sampled value
|
|
falls below this threshold and reaches the
|
|
cFcAlarmFallingThreshold.
|
|
|
|
This object can only be used to set the lower
|
|
word value of the threshold. If the threshold
|
|
to be set is greater than 4,294,967,295 then
|
|
cFcAlarmRisingThresholdHigh should be used to
|
|
set the upper word value of the threshold."
|
|
::= { cFcAlarmEntry 80 }
|
|
|
|
cFcAlarmRisingThresholdHigh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper word value of the rising threshold for
|
|
the sampled statistic.
|
|
|
|
If the value of threshold to be set in
|
|
cFcAlarmRisingThreshold is greater than
|
|
4,294,967,295, then this object
|
|
should be used to set the upper word value of the
|
|
threshold."
|
|
::= { cFcAlarmEntry 90 }
|
|
|
|
cFcAlarmFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold for the sampled statistic. When the
|
|
current sampled value is less than or equal to this
|
|
threshold, and the value at the last sampling
|
|
interval was greater than this threshold, a single
|
|
event will be generated. A single event will also
|
|
be generated if the first sample after this entry
|
|
becomes valid is less than or equal to this
|
|
threshold and the associated cFcAlarmStartupAlarm is
|
|
equal to fallingcFcAlarm(2) or risingOrFallingAlarm(3).
|
|
|
|
After a falling event is generated, another such event
|
|
will not be generated until the sampled value
|
|
rises above this threshold and reaches the
|
|
cFcAlarmRisingThreshold.
|
|
|
|
This object can only be used to set the lower
|
|
word value of the threshold. If the threshold
|
|
to be set is greater than 4,294,967,295, then
|
|
cFcAlarmFallingThresholdHigh should be used to
|
|
set the upper word value of the threshold."
|
|
::= { cFcAlarmEntry 100 }
|
|
|
|
cFcAlarmFallingThresholdHigh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper word value of the falling threshold for
|
|
the sampled statistic.
|
|
|
|
If the value of threshold to be set in
|
|
cFcAlarmFallingThreshold is greater than
|
|
4,294,967,295, then this object
|
|
should be used to set the upper word value of the
|
|
threshold."
|
|
::= { cFcAlarmEntry 110 }
|
|
|
|
cFcAlarmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ valid(1),
|
|
createRequest(2),
|
|
underCreation(3),
|
|
invalid(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this cFcAlarm entry."
|
|
::= { cFcAlarmEntry 120 }
|
|
|
|
-- MIB Conformance Statements
|
|
|
|
cerentFcMIBConformance OBJECT IDENTIFIER ::=
|
|
{ cerentRequirements 40 }
|
|
|
|
cerentFcMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ cerentFcMIBConformance 1 }
|
|
|
|
cerentFcMIBGroups OBJECT IDENTIFIER ::=
|
|
{ cerentFcMIBConformance 2 }
|
|
|
|
cerentFcMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for platforms that monitor the
|
|
Fibre channel interfaces with respect to error
|
|
counters, for the physical layer."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cerentFcStatsGroup
|
|
}
|
|
|
|
::= { cerentFcMIBCompliances 1 }
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
cerentFcStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cFcStatsInvalidOrdSets,
|
|
cFcStatsInvalidOrdSetsHigh,
|
|
cFcStatsEncodingDispErr,
|
|
cFcStatsEncodingDispErrHigh,
|
|
cFcStatsInTotalErr,
|
|
cFcStatsInTotalErrHigh,
|
|
cFcStatsInFramesTrunc,
|
|
cFcStatsInFramesTruncHigh,
|
|
cFcStatsInFramesTooLong,
|
|
cFcStatsInFramesTooLongHigh,
|
|
cFcStatsInFramesBadCRC,
|
|
cFcStatsInFramesBadCRCHigh,
|
|
cFcStatsInFrames,
|
|
cFcStatsInFramesHigh,
|
|
cFcStatsInElements,
|
|
cFcStatsInElementsHigh,
|
|
cFcStatsInDiscards,
|
|
cFcStatsInDiscardsHigh,
|
|
cFcStatsOutFramesBadCRC,
|
|
cFcStatsOutFramesBadCRCHigh,
|
|
cFcStatsOutFrames,
|
|
cFcStatsOutFramesHigh,
|
|
cFcStatsOutElements,
|
|
cFcStatsOutElementsHigh,
|
|
cFcStatsOutDiscards,
|
|
cFcStatsOutDiscardsHigh,
|
|
cFcStatsLinkResets,
|
|
cFcStatsLinkResetsHigh,
|
|
cFcStatsGfpInSBitErr,
|
|
cFcStatsGfpInSBitErrHigh,
|
|
cFcStatsGfpInMBitErr,
|
|
cFcStatsGfpInMBitErrHigh,
|
|
cFcStatsGfpInTypeInvalid,
|
|
cFcStatsGfpInTypeInvalidHigh,
|
|
cFcStatsGfpInSBlkCRCErr,
|
|
cFcStatsGfpInSBlkCRCErrHigh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects to give
|
|
stats related to the performance
|
|
of an fibre channel interface."
|
|
::= { cerentFcMIBGroups 1 }
|
|
|
|
cerentFcHistGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
|
|
cFcHistInvalidOrdSets,
|
|
cFcHistInvalidOrdSetsHigh,
|
|
cFcHistEncodingDispErr,
|
|
cFcHistEncodingDispErrHigh,
|
|
cFcHistInTotalErr,
|
|
cFcHistInTotalErrHigh,
|
|
cFcHistInFramesTrunc,
|
|
cFcHistInFramesTruncHigh,
|
|
cFcHistInFramesTooLong,
|
|
cFcHistInFramesTooLongHigh,
|
|
cFcHistInFramesBadCRC,
|
|
cFcHistInFramesBadCRCHigh,
|
|
cFcHistInFrames,
|
|
cFcHistInFramesHigh,
|
|
cFcHistInElements,
|
|
cFcHistInElementsHigh,
|
|
cFcHistInDiscards,
|
|
cFcHistInDiscardsHigh,
|
|
cFcHistOutFramesBadCRC,
|
|
cFcHistOutFramesBadCRCHigh,
|
|
cFcHistOutFrames,
|
|
cFcHistOutFramesHigh,
|
|
cFcHistOutElements,
|
|
cFcHistOutElementsHigh,
|
|
cFcHistOutDiscards,
|
|
cFcHistOutDiscardsHigh,
|
|
cFcHistLinkResets,
|
|
cFcHistLinkResetsHigh,
|
|
cFcHistGfpInSBitErr,
|
|
cFcHistGfpInSBitErrHigh,
|
|
cFcHistGfpInMBitErr,
|
|
cFcHistGfpInMBitErrHigh,
|
|
cFcHistGfpInTypeInvalid,
|
|
cFcHistGfpInTypeInvalidHigh,
|
|
cFcHistGfpInSBlkCRCErr,
|
|
cFcHistGfpInSBlkCRCErrHigh
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects to give
|
|
previous stats related to the performance
|
|
of an fibre channel interface."
|
|
::= { cerentFcMIBGroups 2 }
|
|
|
|
|
|
cerentFcStatsHCGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cFcStatsInvalidOrdSetsHC,
|
|
cFcStatsEncodingDispErrHC,
|
|
cFcStatsInTotalErrHC,
|
|
cFcStatsInFramesTruncHC,
|
|
cFcStatsInFramesTooLongHC,
|
|
cFcStatsInFramesBadCRCHC,
|
|
cFcStatsInFramesHC,
|
|
cFcStatsInElementsHC,
|
|
cFcStatsInDiscardsHC,
|
|
cFcStatsOutFramesBadCRCHC,
|
|
cFcStatsOutFramesHC,
|
|
cFcStatsOutElementsHC,
|
|
cFcStatsOutDiscardsHC,
|
|
cFcStatsLinkResetsHC,
|
|
cFcStatsGfpInSBitErrHC,
|
|
cFcStatsGfpInMBitErrHC,
|
|
cFcStatsGfpInTypeInvalidHC,
|
|
cFcStatsGfpInSBlkCRCErrHC
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of 64 bit objects to give
|
|
stats related to the performance
|
|
of an fibre channel interface."
|
|
::= { cerentFcMIBGroups 3 }
|
|
|
|
|
|
cerentFcHistHCGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cFcHistInvalidOrdSetsHC,
|
|
cFcHistEncodingDispErrHC,
|
|
cFcHistInTotalErrHC,
|
|
cFcHistInFramesTruncHC,
|
|
cFcHistInFramesTooLongHC,
|
|
cFcHistInFramesBadCRCHC,
|
|
cFcHistInFramesHC,
|
|
cFcHistInElementsHC,
|
|
cFcHistInDiscardsHC,
|
|
cFcHistOutFramesBadCRCHC,
|
|
cFcHistOutFramesHC,
|
|
cFcHistOutElementsHC,
|
|
cFcHistOutDiscardsHC,
|
|
cFcHistLinkResetsHC,
|
|
cFcHistGfpInSBitErrHC,
|
|
cFcHistGfpInMBitErrHC,
|
|
cFcHistGfpInTypeInvalidHC,
|
|
cFcHistGfpInSBlkCRCErrHC
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of 64 bit objects to give
|
|
previous stats related to the performance
|
|
of an fibre channel interface."
|
|
::= { cerentFcMIBGroups 4 }
|
|
|
|
cerentFcAlarmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cFcAlarmInterval,
|
|
cFcAlarmVariable,
|
|
cFcAlarmSampleType,
|
|
cFcAlarmValue,
|
|
cFcAlarmValueHigh,
|
|
cFcAlarmStartupAlarm,
|
|
cFcAlarmRisingThreshold,
|
|
cFcAlarmRisingThresholdHigh,
|
|
cFcAlarmFallingThreshold,
|
|
cFcAlarmFallingThresholdHigh,
|
|
cFcAlarmStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of alarm thresholds configured
|
|
on fibre channel interfaces."
|
|
::= { cerentFcMIBGroups 5 }
|
|
|
|
|
|
END
|