664 lines
20 KiB
Plaintext
664 lines
20 KiB
Plaintext
-- =============================================================================
|
|
-- Copyright (c) 2004-2012 New H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description:
|
|
-- The file defines a MIB to provide spectrum analysis information.
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
-- V1.0 Created by Wang Lu
|
|
-- Initial version 2011-08-05
|
|
-- =============================================================================
|
|
HH3C-DOT11-SA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TruthValue,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY,
|
|
Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
hh3cDot11,
|
|
Hh3cDot11ChannelScopeType,
|
|
Hh3cDot11ObjectIDType,
|
|
Hh3cDot11RadioScopeType,
|
|
Hh3cDot11SaIntfDevType
|
|
FROM HH3C-DOT11-REF-MIB;
|
|
|
|
hh3cDot11Sa MODULE-IDENTITY
|
|
LAST-UPDATED "201108262000Z" -- Aug 26, 2011 at 20:00 GMT
|
|
ORGANIZATION
|
|
"New H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team New H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085
|
|
"
|
|
DESCRIPTION
|
|
"This MIB module provides spectrum analysis information.
|
|
The initial revision of this MIB module.
|
|
|
|
The spectrum analysis module on APs is able to examine the radio
|
|
frequency (RF) environment in which the Wi-Fi network is operating,
|
|
identify interference and classify its sources. An analysis of the
|
|
results can then be used to quickly isolate issues with packet
|
|
transmission, channel quality, and traffic congestion caused by
|
|
contention with other devices operating in the same band or channel."
|
|
REVISION "201108262000Z"
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { hh3cDot11 13 }
|
|
|
|
-- *****************************************************************************
|
|
-- * Major sections
|
|
-- *****************************************************************************
|
|
|
|
hh3cDot11SaCfgGroup OBJECT IDENTIFIER ::= { hh3cDot11Sa 1 }
|
|
hh3cDot11SaStatusGroup OBJECT IDENTIFIER ::= { hh3cDot11Sa 2 }
|
|
hh3cDot11SaNotifyGroup OBJECT IDENTIFIER ::= { hh3cDot11Sa 3 }
|
|
|
|
-- cfg table
|
|
hh3cDot11SaCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Hh3cDot11SaCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure spectrum analysis."
|
|
::= { hh3cDot11SaCfgGroup 1 }
|
|
|
|
hh3cDot11SaCfgEntry OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the spectrum analysis configuration."
|
|
INDEX { hh3cDot11SaCfgRadioType }
|
|
::= { hh3cDot11SaCfgTable 1 }
|
|
|
|
Hh3cDot11SaCfgEntry ::= SEQUENCE
|
|
{
|
|
hh3cDot11SaCfgRadioType INTEGER,
|
|
hh3cDot11SaEnable TruthValue,
|
|
hh3cDot11SaRptDevType BITS,
|
|
hh3cDot11SaTrapDevEnable TruthValue,
|
|
hh3cDot11SaTrapDevType BITS,
|
|
hh3cDot11SaTrapAQEnable TruthValue,
|
|
hh3cDot11SaTrapAQThreshold Integer32,
|
|
hh3cDot11SaDrivenRRMEnable TruthValue,
|
|
hh3cDot11SaDrivenRRMSnt INTEGER
|
|
}
|
|
|
|
hh3cDot11SaCfgRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dot11bg(1),
|
|
dot11a(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio type of the configuration."
|
|
::= { hh3cDot11SaCfgEntry 1 }
|
|
|
|
hh3cDot11SaEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether spectrum analysis is enabled globally."
|
|
::= { hh3cDot11SaCfgEntry 2 }
|
|
|
|
hh3cDot11SaRptDevType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
microwave(0),
|
|
microwaveInverter(1),
|
|
bluetooth(2),
|
|
fixedFreqOthers(3),
|
|
fixedFreqCordlessPhone(4),
|
|
fixedFreqVideo(5),
|
|
fixedFreqAudio(6),
|
|
freqHopperOthers(7),
|
|
freqHopperCordlessBase(8),
|
|
freqHopperCordlessNetwork(9),
|
|
freqHopperXbox(10),
|
|
genericInterferer(11)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents which types of interference devices should be reported."
|
|
::= { hh3cDot11SaCfgEntry 3 }
|
|
|
|
hh3cDot11SaTrapDevEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the interference device trap is enabled."
|
|
::= { hh3cDot11SaCfgEntry 4 }
|
|
|
|
hh3cDot11SaTrapDevType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
microwave(0),
|
|
microwaveInverter(1),
|
|
bluetooth(2),
|
|
fixedFreqOthers(3),
|
|
fixedFreqCordlessPhone(4),
|
|
fixedFreqVideo(5),
|
|
fixedFreqAudio(6),
|
|
freqHopperOthers(7),
|
|
freqHopperCordlessBase(8),
|
|
freqHopperCordlessNetwork(9),
|
|
freqHopperXbox(10),
|
|
genericInterferer(11)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents which types of interference device will send traps
|
|
when the interference device trap is enabled."
|
|
::= { hh3cDot11SaCfgEntry 5 }
|
|
|
|
hh3cDot11SaTrapAQEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the air quality trap is enabled."
|
|
::= { hh3cDot11SaCfgEntry 6 }
|
|
|
|
hh3cDot11SaTrapAQThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the air quality trap threshold. When the air quality
|
|
is below this value, the air quality trap will be sent."
|
|
::= { hh3cDot11SaCfgEntry 7 }
|
|
|
|
hh3cDot11SaDrivenRRMEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure whether to trigger RRM to run when an access point detects
|
|
a certain level of interference."
|
|
::= { hh3cDot11SaCfgEntry 8 }
|
|
|
|
hh3cDot11SaDrivenRRMSnt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
low(1),
|
|
medium(2),
|
|
high(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the threshold at which RRM will be triggered. When the
|
|
interference level for the access point rises above the threshold
|
|
level, RRM initiates a local dynamic channel assignment (DCA) run
|
|
and changes the channel of the affected access point radio if
|
|
possible to improve network performance. Low represents a decreased
|
|
sensitivity to changes in the environment while high represents an
|
|
increased sensitivity."
|
|
::= { hh3cDot11SaCfgEntry 9 }
|
|
|
|
-- fft table
|
|
hh3cDot11SaRtFFTDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Hh3cDot11SaRtFFTDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the real-time FFT data for spectrum analysis."
|
|
::= { hh3cDot11SaStatusGroup 1 }
|
|
|
|
hh3cDot11SaRtFFTDataEntry OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaRtFFTDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the real-time FFT data for spectrum analysis."
|
|
INDEX
|
|
{
|
|
hh3cDot11SaAPID,
|
|
hh3cDot11SaRadioID,
|
|
hh3cDot11SaRtDataGroupID,
|
|
hh3cDot11SaFrequency
|
|
}
|
|
::= { hh3cDot11SaRtFFTDataTable 1 }
|
|
|
|
Hh3cDot11SaRtFFTDataEntry ::= SEQUENCE
|
|
{
|
|
hh3cDot11SaAPID Hh3cDot11ObjectIDType,
|
|
hh3cDot11SaRadioID Hh3cDot11RadioScopeType,
|
|
hh3cDot11SaRtDataGroupID Integer32,
|
|
hh3cDot11SaFrequency Integer32,
|
|
hh3cDot11SaRtFreqPower Integer32,
|
|
hh3cDot11SaRtFreqMaxPower Integer32,
|
|
hh3cDot11SaRtFreqDutyCycle Integer32,
|
|
hh3cDot11SaRtFreqDataSeqNo Unsigned32
|
|
}
|
|
|
|
hh3cDot11SaAPID OBJECT-TYPE
|
|
SYNTAX Hh3cDot11ObjectIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the serial ID of the AP."
|
|
::= { hh3cDot11SaRtFFTDataEntry 1 }
|
|
|
|
hh3cDot11SaRadioID OBJECT-TYPE
|
|
SYNTAX Hh3cDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of the radio."
|
|
::= { hh3cDot11SaRtFFTDataEntry 2 }
|
|
|
|
hh3cDot11SaRtDataGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents group ID of the collected data. Maybe the device collects
|
|
multiple groups of data at the collected interval."
|
|
::= { hh3cDot11SaRtFFTDataEntry 3 }
|
|
|
|
hh3cDot11SaFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the frequency number in 100 Hz."
|
|
::= { hh3cDot11SaRtFFTDataEntry 4 }
|
|
|
|
hh3cDot11SaRtFreqPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the power of the frequency point."
|
|
::= { hh3cDot11SaRtFFTDataEntry 5 }
|
|
|
|
hh3cDot11SaRtFreqMaxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the max power of the frequency point."
|
|
::= { hh3cDot11SaRtFFTDataEntry 6 }
|
|
|
|
hh3cDot11SaRtFreqDutyCycle OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the duty cycle of the frequency point."
|
|
::= { hh3cDot11SaRtFFTDataEntry 7 }
|
|
|
|
hh3cDot11SaRtFreqDataSeqNo OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the sequence number of the data."
|
|
::= { hh3cDot11SaRtFFTDataEntry 8 }
|
|
|
|
-- interfering device table
|
|
hh3cDot11SaIntfDevTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Hh3cDot11SaIntfDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the information of the interfering devices."
|
|
::= { hh3cDot11SaStatusGroup 2 }
|
|
|
|
hh3cDot11SaIntfDevEntry OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaIntfDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the information of the interfering devices."
|
|
INDEX
|
|
{
|
|
hh3cDot11SaAPID,
|
|
hh3cDot11SaRadioID,
|
|
hh3cDot11SaDevID
|
|
}
|
|
::= { hh3cDot11SaIntfDevTable 1 }
|
|
|
|
Hh3cDot11SaIntfDevEntry ::= SEQUENCE
|
|
{
|
|
hh3cDot11SaDevID Integer32,
|
|
hh3cDot11SaDevType Hh3cDot11SaIntfDevType,
|
|
hh3cDot11SaDevSI Integer32,
|
|
hh3cDot11SaDevRSSI Integer32,
|
|
hh3cDot11SaDevDutyCycle Integer32,
|
|
hh3cDot11SaDevAffectedChls OCTET STRING,
|
|
hh3cDot11SaDevDetectedTime DateAndTime
|
|
}
|
|
|
|
hh3cDot11SaDevID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the device identification number that uniquely
|
|
identified the interfering device."
|
|
::= { hh3cDot11SaIntfDevEntry 1 }
|
|
|
|
hh3cDot11SaDevType OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaIntfDevType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents type of the interferer."
|
|
::= { hh3cDot11SaIntfDevEntry 2 }
|
|
|
|
hh3cDot11SaDevSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents severity index of the interfering device. Severity index
|
|
is calculated, a positive integer between 0 and 100(with 100 being the
|
|
most severe)."
|
|
::= { hh3cDot11SaIntfDevEntry 3 }
|
|
|
|
hh3cDot11SaDevRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents receive signal strength indicator (RSSI) of interfering
|
|
device."
|
|
::= { hh3cDot11SaIntfDevEntry 4 }
|
|
|
|
hh3cDot11SaDevDutyCycle OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents proportion of time in percentage during which the
|
|
interfering device was active."
|
|
::= { hh3cDot11SaIntfDevEntry 5 }
|
|
|
|
hh3cDot11SaDevAffectedChls OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents channels that the interfering device affects."
|
|
::= { hh3cDot11SaIntfDevEntry 6 }
|
|
|
|
hh3cDot11SaDevDetectedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents time at which the interference was detected."
|
|
::= { hh3cDot11SaIntfDevEntry 7 }
|
|
|
|
-- air quality table
|
|
hh3cDot11SaAirQualityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Hh3cDot11SaAirQualityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the air quality of the channels."
|
|
::= { hh3cDot11SaStatusGroup 3 }
|
|
|
|
hh3cDot11SaAirQualityEntry OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaAirQualityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the air quality of the channels."
|
|
INDEX
|
|
{
|
|
hh3cDot11SaAPID,
|
|
hh3cDot11SaRadioID,
|
|
hh3cDot11SaChlNum
|
|
}
|
|
::= { hh3cDot11SaAirQualityTable 1 }
|
|
|
|
Hh3cDot11SaAirQualityEntry ::= SEQUENCE
|
|
{
|
|
hh3cDot11SaChlNum Hh3cDot11ChannelScopeType,
|
|
hh3cDot11SaAvgQuality Integer32,
|
|
hh3cDot11SaMinQuality Integer32,
|
|
hh3cDot11SaIntfDevNum Integer32,
|
|
hh3cDot11SaWiFiUtil Integer32,
|
|
hh3cDot11SaNonWiFiUtil Integer32,
|
|
hh3cDot11SaNoiseFloor Integer32
|
|
}
|
|
|
|
hh3cDot11SaChlNum OBJECT-TYPE
|
|
SYNTAX Hh3cDot11ChannelScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio channel where the air quality is monitored."
|
|
::= { hh3cDot11SaAirQualityEntry 1 }
|
|
|
|
hh3cDot11SaAvgQuality OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the average air quality for this radio channel."
|
|
::= { hh3cDot11SaAirQualityEntry 2 }
|
|
|
|
hh3cDot11SaMinQuality OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the minimum air quality for this radio channel."
|
|
::= { hh3cDot11SaAirQualityEntry 3 }
|
|
|
|
hh3cDot11SaIntfDevNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of interferers detected by the radios
|
|
on the 802.11a/n or 802.11b/g/n radio band."
|
|
::= { hh3cDot11SaAirQualityEntry 4 }
|
|
|
|
hh3cDot11SaWiFiUtil OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the percentage of the channel currently being
|
|
used by Wi-Fi devices."
|
|
::= { hh3cDot11SaAirQualityEntry 5 }
|
|
|
|
hh3cDot11SaNonWiFiUtil OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the percentage of the channel currently being
|
|
used by non-Wi-Fi interference."
|
|
::= { hh3cDot11SaAirQualityEntry 6 }
|
|
|
|
hh3cDot11SaNoiseFloor OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents current noise floor recorded on the channel."
|
|
::= { hh3cDot11SaAirQualityEntry 7 }
|
|
|
|
--Notify Group
|
|
hh3cDot11SaTraps OBJECT IDENTIFIER ::= { hh3cDot11SaNotifyGroup 0 }
|
|
hh3cDot11SaIntfDevDetected NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hh3cDot11SaTrapAPID,
|
|
hh3cDot11SaTrapRadioID,
|
|
hh3cDot11SaTrapDevID,
|
|
hh3cDot11SaTrapIntfDevType,
|
|
hh3cDot11APTrapDevSI,
|
|
hh3cDot11SaTrapDevRSSI,
|
|
hh3cDot11APTrapDevDC,
|
|
hh3cDot11APTrapDevChls,
|
|
hh3cDot11APTrapDevDctTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interfering device is detected."
|
|
::= { hh3cDot11SaTraps 1 }
|
|
|
|
hh3cDot11SaIntfDevDisappear NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hh3cDot11SaTrapAPID,
|
|
hh3cDot11SaTrapRadioID,
|
|
hh3cDot11SaTrapDevID,
|
|
hh3cDot11SaTrapIntfDevType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interfering device disappeared."
|
|
::= { hh3cDot11SaTraps 2 }
|
|
|
|
hh3cDot11SaChlQltLow NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hh3cDot11SaTrapAPID,
|
|
hh3cDot11SaTrapRadioID,
|
|
hh3cDot11SaTrapChlNum,
|
|
hh3cDot11SaTrapChlQlt,
|
|
hh3cDot11SaTrapChlIntfNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The quality of the channel is below the specified threshold."
|
|
::= { hh3cDot11SaTraps 3 }
|
|
|
|
hh3cDot11SaChlQltRecover NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hh3cDot11SaTrapAPID,
|
|
hh3cDot11SaTrapRadioID,
|
|
hh3cDot11SaTrapChlNum,
|
|
hh3cDot11SaTrapChlQlt,
|
|
hh3cDot11SaTrapChlIntfNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The quality of the channel recovered from low status."
|
|
::= { hh3cDot11SaTraps 4 }
|
|
|
|
hh3cDot11SaTrapVars OBJECT IDENTIFIER ::= { hh3cDot11SaNotifyGroup 1 }
|
|
|
|
hh3cDot11SaTrapAPID OBJECT-TYPE
|
|
SYNTAX Hh3cDot11ObjectIDType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the identifier of the AP."
|
|
::= { hh3cDot11SaTrapVars 1 }
|
|
|
|
hh3cDot11SaTrapRadioID OBJECT-TYPE
|
|
SYNTAX Hh3cDot11RadioScopeType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the identifier of the radio."
|
|
::= { hh3cDot11SaTrapVars 2 }
|
|
|
|
hh3cDot11SaTrapDevID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the device identification number that uniquely
|
|
identified the interfering device."
|
|
::= { hh3cDot11SaTrapVars 3 }
|
|
|
|
hh3cDot11SaTrapIntfDevType OBJECT-TYPE
|
|
SYNTAX Hh3cDot11SaIntfDevType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents type of the interferer."
|
|
::= { hh3cDot11SaTrapVars 4 }
|
|
|
|
hh3cDot11APTrapDevSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents severity index of the interfering device. Severity index
|
|
is calculated, a positive integer between 0 and 100(with 100 being the
|
|
most severe)."
|
|
::= { hh3cDot11SaTrapVars 5 }
|
|
|
|
hh3cDot11SaTrapDevRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents receive signal strength indicator (RSSI) of interfering
|
|
device."
|
|
::= { hh3cDot11SaTrapVars 6 }
|
|
|
|
hh3cDot11APTrapDevDC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents proportion of time in percentage during which the
|
|
interfering device was active."
|
|
::= { hh3cDot11SaTrapVars 7 }
|
|
|
|
hh3cDot11APTrapDevChls OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents channels that the interfering device affects."
|
|
::= { hh3cDot11SaTrapVars 8 }
|
|
|
|
hh3cDot11APTrapDevDctTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents time at which the interference was detected."
|
|
::= { hh3cDot11SaTrapVars 9 }
|
|
|
|
hh3cDot11SaTrapChlNum OBJECT-TYPE
|
|
SYNTAX Hh3cDot11ChannelScopeType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio channel where the air quality is monitored."
|
|
::= { hh3cDot11SaTrapVars 10 }
|
|
|
|
hh3cDot11SaTrapChlQlt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the quality for this radio channel."
|
|
::= { hh3cDot11SaTrapVars 11 }
|
|
|
|
hh3cDot11SaTrapChlIntfNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of interferers detected by the radios
|
|
on the 802.11a/n or 802.11b/g/n radio band."
|
|
::= { hh3cDot11SaTrapVars 12 }
|
|
END
|