mibs/MIBS/dkt/DKT-GE-MIB
2023-12-05 12:25:34 +01:00

1240 lines
36 KiB
Plaintext

DKT-GE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
Counter32 FROM SNMPv2-SMI
OBJECT-GROUP FROM SNMPv2-CONF
dkt FROM DKT-MIB;
geMIB MODULE-IDENTITY
LAST-UPDATED "200901140000Z"
ORGANIZATION "DKT A/S"
CONTACT-INFO
"postal: DKT A/S
Fanoevej 6
DK-4060 Kirke Saaby
Denmark
email: info@dktcomega.com"
DESCRIPTION "DKT Gigabit MIB."
::= { dkt 14 }
geSwitchEngine OBJECT IDENTIFIER ::= { geMIB 1 }
geATU OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20480))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dumps the Address Translation Unit (ATU) Switch table in semi colon format"
::= { geSwitchEngine 1 }
geUnicastDelete
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table."
::= { geSwitchEngine 2 }
geMulticastDelete
OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Removes a multicast IP address from the Address Translation Unit (ATU) Switch table."
::= { geSwitchEngine 3 }
geIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port"
::= { geSwitchEngine 4 }
geVTU OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..9600))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dumps the VLAN Table Unit (VTU) Switch table in semi colon format"
::= { geSwitchEngine 5 }
geVLANCreate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE"
::= { geSwitchEngine 6 }
geVLANDelete OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Deletes a VLAN, input parameter is VLAN VID: 0 - 4095"
::= { geSwitchEngine 7 }
geClearVTU OBJECT-TYPE
SYNTAX INTEGER (1)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table"
::= { geSwitchEngine 8 }
geDumpPIRLBuckets OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dumps a list of the active buckets."
::= { geSwitchEngine 9 }
geVLANProviderMode OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port."
::= { geSwitchEngine 10 }
gePorts OBJECT IDENTIFIER ::= { geMIB 2 }
geCPUPort OBJECT IDENTIFIER ::= { gePorts 1 }
geCPUPortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geCPUPort 1 }
geCPUPortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO"
::= { geCPUPort 2 }
geCPUPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geCPUPort 3 }
geCPUPortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geCPUPort 4 }
geCPUPortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geCPUPort 5 }
geCPUPortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geCPUPort 6 }
geCPUPortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geCPUPort 7 }
geCPUPortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geCPUPort 8 }
geCPUPortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geCPUPort 9 }
geCPUPortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geCPUPort 10 }
geCPUPortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geCPUPort 11 }
geCPUPortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geCPUPort 12 }
geCPUPortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geCPUPort 13 }
geCPUPortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geCPUPort 14 }
geCPUPortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geCPUPort 15 }
geCPUPortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geCPUPort 16 }
geCPUPortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geCPUPort 17 }
geCPUPortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geCPUPort 18 }
geCPUPortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geCPUPort 19 }
geWANPort OBJECT IDENTIFIER ::= { gePorts 2 }
geWANPortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geWANPort 1 }
geWANPortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
::= { geWANPort 2 }
geWANPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geWANPort 3 }
geWANPortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geWANPort 4 }
geWANPortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geWANPort 5 }
geWANPortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geWANPort 6 }
geWANPortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geWANPort 7 }
geWANPortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geWANPort 8 }
geWANPortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geWANPort 9 }
geWANPortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geWANPort 10 }
geWANPortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geWANPort 11 }
geWANPortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geWANPort 12 }
geWANPortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geWANPort 13 }
geWANPortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geWANPort 14 }
geWANPortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geWANPort 15 }
geWANPortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geWANPort 16 }
geWANPortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geWANPort 17 }
geWANPortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geWANPort 18 }
geWANPortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geWANPort 19 }
geWANPortArpMirroring OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror ARP packets seen on the port to the CPU port."
::= { geWANPort 20 }
geLAN1Port OBJECT IDENTIFIER ::= { gePorts 3 }
geLAN1PortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 1 }
geLAN1PortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
::= { geLAN1Port 2 }
geLAN1PortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geLAN1Port 3 }
geLAN1PortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 4 }
geLAN1PortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 5 }
geLAN1PortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 6 }
geLAN1PortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 7 }
geLAN1PortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 8 }
geLAN1PortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geLAN1Port 9 }
geLAN1PortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geLAN1Port 10 }
geLAN1PortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geLAN1Port 11 }
geLAN1PortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geLAN1Port 12 }
geLAN1PortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 13 }
geLAN1PortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geLAN1Port 14 }
geLAN1PortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geLAN1Port 15 }
geLAN1PortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geLAN1Port 16 }
geLAN1PortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geLAN1Port 17 }
geLAN1PortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geLAN1Port 18 }
geLAN1PortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geLAN1Port 19 }
geLAN1PortArpMirroring OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror ARP packets seen on the port to the CPU port."
::= { geLAN1Port 20 }
geLAN2Port OBJECT IDENTIFIER ::= { gePorts 4 }
geLAN2PortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 1 }
geLAN2PortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
::= { geLAN2Port 2 }
geLAN2PortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geLAN2Port 3 }
geLAN2PortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 4 }
geLAN2PortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 5 }
geLAN2PortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 6 }
geLAN2PortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 7 }
geLAN2PortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 8 }
geLAN2PortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geLAN2Port 9 }
geLAN2PortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geLAN2Port 10 }
geLAN2PortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geLAN2Port 11 }
geLAN2PortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geLAN2Port 12 }
geLAN2PortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 13 }
geLAN2PortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geLAN2Port 14 }
geLAN2PortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geLAN2Port 15 }
geLAN2PortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geLAN2Port 16 }
geLAN2PortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geLAN2Port 17 }
geLAN2PortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geLAN2Port 18 }
geLAN2PortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geLAN2Port 19 }
geLAN2PortArpMirroring OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror ARP packets seen on the port to the CPU port."
::= { geLAN2Port 20 }
geLAN3Port OBJECT IDENTIFIER ::= { gePorts 5 }
geLAN3PortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 1 }
geLAN3PortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
::= { geLAN3Port 2 }
geLAN3PortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geLAN3Port 3 }
geLAN3PortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 4 }
geLAN3PortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 5 }
geLAN3PortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 6 }
geLAN3PortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 7 }
geLAN3PortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 8 }
geLAN3PortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geLAN3Port 9 }
geLAN3PortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geLAN3Port 10 }
geLAN3PortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geLAN3Port 11 }
geLAN3PortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geLAN3Port 12 }
geLAN3PortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 13 }
geLAN3PortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geLAN3Port 14 }
geLAN3PortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geLAN3Port 15 }
geLAN3PortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geLAN3Port 16 }
geLAN3PortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geLAN3Port 17 }
geLAN3PortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geLAN3Port 18 }
geLAN3PortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geLAN3Port 19 }
geLAN3PortArpMirroring OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror ARP packets seen on the port to the CPU port."
::= { geLAN3Port 20 }
geLAN4Port OBJECT IDENTIFIER ::= { gePorts 6 }
geLAN4PortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 1 }
geLAN4PortSpeedMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
::= { geLAN4Port 2 }
geLAN4PortLinkStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gets the Link status for the port"
::= { geLAN4Port 3 }
geLAN4PortFlowControl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 4 }
geLAN4PortIEEEQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 5 }
geLAN4PortIPQoSPriority OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 6 }
geLAN4PortQoSPortMapRule OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 7 }
geLAN4PortVIDNRLEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 8 }
geLAN4PortDisablePIRL2Bucket OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
::= { geLAN4Port 9 }
geLAN4PortEgressRateLimitation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
::= { geLAN4Port 10 }
geLAN4PortIngressRateLimitation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
::= { geLAN4Port 11 }
geLAN4PortDefaultVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
::= { geLAN4Port 12 }
geLAN4PortForceDefaultVID OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 13 }
geLAN4PortVLANPortMode OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure"
::= { geLAN4Port 14 }
geLAN4PortBlockAllUnknown OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
::= { geLAN4Port 15 }
geLAN4PortIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
::= { geLAN4Port 16 }
geLAN4PortAddUnicast OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
::= { geLAN4Port 17 }
geLAN4PortAddMulticast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
::= { geLAN4Port 18 }
geLAN4PortMtu OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU size of the port."
::= { geLAN4Port 19 }
geLAN4PortArpMirroring OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror ARP packets seen on the port to the CPU port."
::= { geLAN4Port 20 }
geModuleGroup OBJECT-GROUP
OBJECTS {
geSwitchEngine,
geATU,
geUnicastDelete,
geMulticastDelete,
geIGMPSnooping,
geVTU,
geVLANCreate,
geVLANDelete,
geClearVTU,
geVLANProviderMode,
gePorts,
geDumpPIRLBuckets,
geCPUPort,
geCPUPortAutoNegotiation, geCPUPortSpeedMode, geCPUPortLinkStatus, geCPUPortFlowControl, geCPUPortIEEEQoSPriority, geCPUPortIPQoSPriority, geCPUPortQoSPortMapRule, geCPUPortVIDNRLEnable, geCPUPortDisablePIRL2Bucket, geCPUPortEgressRateLimitation, geCPUPortIngressRateLimitation, geCPUPortDefaultVLAN, geCPUPortForceDefaultVID, geCPUPortVLANPortMode, geCPUPortBlockAllUnknown, geCPUPortIGMPSnooping, geCPUPortAddUnicast, geCPUPortAddMulticast, geCPUPortMtu,
geWANPort,
geWANPortAutoNegotiation, geWANPortSpeedMode, geWANPortLinkStatus, geWANPortFlowControl, geWANPortIEEEQoSPriority, geWANPortIPQoSPriority, geWANPortQoSPortMapRule, geWANPortVIDNRLEnable, geWANPortDisablePIRL2Bucket, geWANPortEgressRateLimitation, geWANPortIngressRateLimitation, geWANPortDefaultVLAN, geWANPortForceDefaultVID, geWANPortVLANPortMode, geWANPortBlockAllUnknown, geWANPortIGMPSnooping, geWANPortAddUnicast, geWANPortAddMulticast, geWANPortMtu, geWANPortArpMirroring,
geLAN1Port,
geLAN1PortAutoNegotiation, geLAN1PortSpeedMode, geLAN1PortLinkStatus, geLAN1PortFlowControl, geLAN1PortIEEEQoSPriority, geLAN1PortIPQoSPriority, geLAN1PortQoSPortMapRule, geLAN1PortVIDNRLEnable, geLAN1PortDisablePIRL2Bucket, geLAN1PortEgressRateLimitation, geLAN1PortIngressRateLimitation, geLAN1PortDefaultVLAN, geLAN1PortForceDefaultVID, geLAN1PortVLANPortMode, geLAN1PortBlockAllUnknown, geLAN1PortIGMPSnooping, geLAN1PortAddUnicast, geLAN1PortAddMulticast, geLAN1PortMtu, geLAN1PortArpMirroring,
geLAN2Port,
geLAN2PortAutoNegotiation, geLAN2PortSpeedMode, geLAN2PortLinkStatus, geLAN2PortFlowControl, geLAN2PortIEEEQoSPriority, geLAN2PortIPQoSPriority, geLAN2PortQoSPortMapRule, geLAN2PortVIDNRLEnable, geLAN2PortDisablePIRL2Bucket, geLAN2PortEgressRateLimitation, geLAN2PortIngressRateLimitation, geLAN2PortDefaultVLAN, geLAN2PortForceDefaultVID, geLAN2PortVLANPortMode, geLAN2PortBlockAllUnknown, geLAN2PortIGMPSnooping, geLAN2PortAddUnicast, geLAN2PortAddMulticast, geLAN2PortMtu, geLAN2PortArpMirroring,
geLAN3Port,
geLAN3PortAutoNegotiation, geLAN3PortSpeedMode, geLAN3PortLinkStatus, geLAN3PortFlowControl, geLAN3PortIEEEQoSPriority, geLAN3PortIPQoSPriority, geLAN3PortQoSPortMapRule, geLAN3PortVIDNRLEnable, geLAN3PortDisablePIRL2Bucket, geLAN3PortEgressRateLimitation, geLAN3PortIngressRateLimitation, geLAN3PortDefaultVLAN, geLAN3PortForceDefaultVID, geLAN3PortVLANPortMode, geLAN3PortBlockAllUnknown, geLAN3PortIGMPSnooping, geLAN3PortAddUnicast, geLAN3PortAddMulticast, geLAN3PortMtu, geLAN3PortArpMirroring,
geLAN4Port,
geLAN4PortAutoNegotiation, geLAN4PortSpeedMode, geLAN4PortLinkStatus, geLAN4PortFlowControl, geLAN4PortIEEEQoSPriority, geLAN4PortIPQoSPriority, geLAN4PortQoSPortMapRule, geLAN4PortVIDNRLEnable, geLAN4PortDisablePIRL2Bucket, geLAN4PortEgressRateLimitation, geLAN4PortIngressRateLimitation, geLAN4PortDefaultVLAN, geLAN4PortForceDefaultVID, geLAN4PortVLANPortMode, geLAN4PortBlockAllUnknown, geLAN4PortIGMPSnooping, geLAN4PortAddUnicast, geLAN4PortAddMulticast, geLAN4PortMtu, geLAN4PortArpMirroring
}
STATUS current
DESCRIPTION
"The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00."
::= { geMIB 4 }
END