613 lines
24 KiB
Plaintext
613 lines
24 KiB
Plaintext
-- *****************************************************************
|
|
-- DLINKSW-SFLOW-MIB.mib : D-Link sFlow MIB
|
|
--
|
|
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
DLINKSW-SFLOW-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus,DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
|
|
InetAddressType, InetAddress, InetAddressIPv4, InetAddressIPv6
|
|
FROM INET-ADDRESS-MIB
|
|
dlinkIndustrialCommon
|
|
FROM DLINK-ID-REC-MIB;
|
|
|
|
dlinkSwSFlowMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201304100000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
" D-Link Corporation
|
|
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
|
Taipei City 114, Taiwan, R.O.C
|
|
Tel: +886-2-66000123
|
|
E-mail: tsd@dlink.com.tw
|
|
"
|
|
DESCRIPTION
|
|
"The structure of sFlow for the proprietary enterprise."
|
|
|
|
REVISION "201304100000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { dlinkIndustrialCommon 36 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dSFlowMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 0 }
|
|
dSFlowMIBObjects OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 1 }
|
|
dSFlowMIBConformance OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
DSFlowDataSource ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the ifIndex of interface as the source of sFlow data.
|
|
|
|
DSFlowDataSources of this traditional form are called
|
|
'port-based'. Ideally the sampling entity will perform
|
|
sampling on all flows originating from or destined to
|
|
the specified interface. However, if the switch architecture
|
|
only allows input or output sampling then the sampling agent
|
|
is permitted to only sample input flows input or output flows.
|
|
Each packet must only be considered once for sampling,
|
|
irrespective of the number of ports it will be forwarded to.
|
|
|
|
Note: Since each DSFlowDataSource operates independently a
|
|
packet that crosses multiple DataSources may generate
|
|
multiple flow records."
|
|
SYNTAX Integer32 (1..2147483647)
|
|
|
|
DSFlowInstance ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If more than one sFlow sampler is available for this
|
|
DSFlowDataSource then individual samplers are distinguished
|
|
using the DSFlowInstance variable. The value of
|
|
DSFlowInstance ranges from 1..n where n is the number of
|
|
samplers associated with this DSFlowDataSource.
|
|
|
|
Note: Each sFlow sampler instance must operate
|
|
independently of all other instances. Setting
|
|
an attribute of one sampler must not alter the
|
|
the behavior and settings of other sampler
|
|
instances."
|
|
SYNTAX Integer32 (1..65535)
|
|
|
|
DSFlowReceiver ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identify the sFlow receiver associated with this resource.
|
|
|
|
A value of zero indicates that this resource is available.
|
|
If non-zero the value must correspond to a valid, active
|
|
dSFlowRcvrIndex.
|
|
|
|
If the value is currently zero it may be set to any
|
|
active entry in the dSFlowRcvrTable. If the value is
|
|
not zero then a set to anything other than zero or
|
|
its current value will result in an SNMP error (bad value).
|
|
|
|
Setting to zero frees the resource and returns all the
|
|
values in this entry to their default values.
|
|
|
|
If an entry in the dSFlowRcvrTable expires, either
|
|
because the dSFlowRcvrOwner is set to the empty
|
|
string or because the dSFlowRcvrCurrentTimeout reaches zero, then
|
|
the agent must mark all associated resources as available
|
|
(by setting the associated DSFlowReceiver entry to zero)
|
|
and all values in these records must be restored to their
|
|
default values.
|
|
|
|
This mechanism provides no enforcement and relies on the
|
|
cooperation of management entities in order to ensure that
|
|
competition for a resource is fairly resolved. A management
|
|
entity should not make any changes to a resource
|
|
without first acquiring it by successfully writing its
|
|
dSFlowRcvrIndex value as the DSFlowReceiver for the resource."
|
|
SYNTAX Integer32
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dSFlowVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the version and implementation of this MIB.
|
|
The version string must have the following structure:
|
|
<MIB Version>;<Organization>;<Software Revision>
|
|
where:
|
|
<MIB Version> must be '1.3', the version of referred SFLOW-MIB,
|
|
which is defined by sFlow.org.
|
|
<Organization> the name of the organization responsible
|
|
for the agent implementation.
|
|
<Revision> the specific software build of this agent.
|
|
|
|
As an example, the string '1.3;InMon Corp.;2.1.1' indicates
|
|
that this agent implements version '1.2' of the SFLOW MIB, that
|
|
it was developed by 'InMon Corp.' and that the software build
|
|
is '2.1.1'.
|
|
|
|
The MIB Version will change with each revision of the SFLOW-MIB.
|
|
|
|
Management entities must check the MIB Version and not attempt
|
|
to manage agents with MIB Versions greater than that for which
|
|
they were designed.
|
|
|
|
Note: The sFlow Datagram Format has an independent version
|
|
number which may change independently from <MIB Version>.
|
|
<MIB Version> applies to the structure and semantics of
|
|
the SFLOW MIB only."
|
|
DEFVAL { "1.3;;" }
|
|
::= { dSFlowMIBObjects 1 }
|
|
|
|
dSFlowAgentAddressIPv4 OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 address associated with this agent."
|
|
::= { dSFlowMIBObjects 2 }
|
|
|
|
dSFlowAgentAddressIPv6 OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address associated with this agent. If the IPv6
|
|
is not supported on this agent, 0::0 will be displayed."
|
|
::= { dSFlowMIBObjects 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Receiver Table
|
|
-- -----------------------------------------------------------------------------
|
|
dSFlowRcvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DSFlowRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the receivers of sFlow information."
|
|
::= { dSFlowMIBObjects 4 }
|
|
|
|
dSFlowRcvrEntry OBJECT-TYPE
|
|
SYNTAX DSFlowRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes of an sFlow Receiver."
|
|
INDEX { dSFlowRcvrIndex }
|
|
::= { dSFlowRcvrTable 1 }
|
|
|
|
DSFlowRcvrEntry ::= SEQUENCE {
|
|
dSFlowRcvrIndex Integer32,
|
|
dSFlowRcvrOwner DisplayString,
|
|
dSFlowRcvrAdminTimeout Integer32,
|
|
dSFlowRcvrCurrentTimeout Integer32,
|
|
dSFlowRcvrMaximumDatagramSize Integer32,
|
|
dSFlowRcvrAddressType InetAddressType,
|
|
dSFlowRcvrAddress InetAddress,
|
|
dSFlowRcvrVrfName DisplayString,
|
|
dSFlowRcvrPort Integer32,
|
|
dSFlowRcvrDatagramVersion Integer32,
|
|
dSFlowRcvrReset INTEGER
|
|
}
|
|
|
|
dSFlowRcvrIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index into dSFlowReceiverTable. The number of supported receivers
|
|
is project dependent."
|
|
::= { dSFlowRcvrEntry 1 }
|
|
|
|
dSFlowRcvrOwner OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity making use of this dSFlowRcvrTable entry. The
|
|
empty string indicates that the entry is currently unclaimed.
|
|
An entity wishing to claim a dSFlowRcvrTable entry must
|
|
ensure that the entry is unclaimed before trying to claim it.
|
|
The entry is claimed by setting the owner string. The entry
|
|
must be claimed before any changes can be made to the receiver's
|
|
other objects.
|
|
|
|
When a management entity is finished using the receiver, it
|
|
should set the value of dSFlowRcvrOwner back to unclaimed.
|
|
The agent must restore all other entities this row to their
|
|
default values when the owner is set to unclaimed. It must
|
|
also free all other resources associated with this
|
|
dSFlowRcvrTable entry.
|
|
|
|
This mechanism provides no enforcement and relies on the
|
|
cooperation of management entities in order to ensure that
|
|
competition for a receiver entry is fairly resolved."
|
|
DEFVAL { "" }
|
|
::= { dSFlowRcvrEntry 2 }
|
|
|
|
dSFlowRcvrAdminTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expire time (in seconds) configured for the receiver.
|
|
|
|
A management entity wanting to maintain control of the receiver
|
|
is responsible for setting a new value before the old one
|
|
expires.
|
|
|
|
When the interval expires, the agent is responsible for
|
|
restoring all other entities in this row to their default
|
|
values. It must also free all other resources associated with
|
|
this dSFlowRcvrTable entry.
|
|
|
|
When set, 0 means infinite that the receiver will never be
|
|
expired."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowRcvrEntry 3 }
|
|
|
|
dSFlowRcvrCurrentTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in seconds) remaining before the receiver is released."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowRcvrEntry 4 }
|
|
|
|
dSFlowRcvrMaximumDatagramSize OBJECT-TYPE
|
|
SYNTAX Integer32 (700..1400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of data bytes that can be sent in a single
|
|
sample datagram. The manager should set this value to avoid
|
|
fragmentation of the sFlow datagrams."
|
|
DEFVAL { 1400 }
|
|
::= { dSFlowRcvrEntry 5 }
|
|
|
|
dSFlowRcvrAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the sFlow collector."
|
|
DEFVAL { ipv4 }
|
|
::= { dSFlowRcvrEntry 6 }
|
|
|
|
dSFlowRcvrAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the sFlow collector.
|
|
If set to 0.0.0.0 no sFlow datagrams will be sent."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { dSFlowRcvrEntry 7 }
|
|
|
|
dSFlowRcvrVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the name of the routing forwarding instance."
|
|
DEFVAL { "" }
|
|
::= { dSFlowRcvrEntry 8 }
|
|
|
|
dSFlowRcvrPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port of the remote sFlow collector."
|
|
DEFVAL { 6343 }
|
|
::= { dSFlowRcvrEntry 9 }
|
|
|
|
dSFlowRcvrDatagramVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of sFlow datagrams that should be sent."
|
|
DEFVAL { 5 }
|
|
::= { dSFlowRcvrEntry 10 }
|
|
|
|
dSFlowRcvrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noOp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reset the receiver when set to 'reset'.
|
|
No action is taken if this object is set to 'noOp'.
|
|
When read, the value 'noOp' is returned."
|
|
DEFVAL { noOp }
|
|
::= { dSFlowRcvrEntry 11 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Flow Sampling Table
|
|
-- -----------------------------------------------------------------------------
|
|
dSFlowFsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DSFlowFsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the flow samplers within a device."
|
|
::= { dSFlowMIBObjects 5 }
|
|
|
|
dSFlowFsEntry OBJECT-TYPE
|
|
SYNTAX DSFlowFsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes of a flow sampler."
|
|
INDEX {
|
|
dSFlowFsDataSource,
|
|
dSFlowFsInstance
|
|
}
|
|
::= { dSFlowFsTable 1 }
|
|
|
|
DSFlowFsEntry ::= SEQUENCE {
|
|
dSFlowFsDataSource DSFlowDataSource,
|
|
dSFlowFsInstance DSFlowInstance,
|
|
dSFlowFsReceiver DSFlowReceiver,
|
|
dSFlowFsDirection INTEGER,
|
|
dSFlowFsAdminSamplingRate Integer32,
|
|
dSFlowFsActiveSamplingRate Integer32,
|
|
dSFlowFsMaximumHeaderSize Integer32,
|
|
dSFlowFsRowStatus RowStatus
|
|
}
|
|
|
|
dSFlowFsDataSource OBJECT-TYPE
|
|
SYNTAX DSFlowDataSource
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source of the data for this flow
|
|
sampler."
|
|
::= { dSFlowFsEntry 1 }
|
|
|
|
dSFlowFsInstance OBJECT-TYPE
|
|
SYNTAX DSFlowInstance
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance index for uniquely identifying the flow sampler
|
|
when multiple flow samplers are associated with one interface."
|
|
::= { dSFlowFsEntry 2 }
|
|
|
|
dSFlowFsReceiver OBJECT-TYPE
|
|
SYNTAX DSFlowReceiver
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the sFlow receiver for this flow sampler."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowFsEntry 3 }
|
|
|
|
dSFlowFsDirection OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
inbound(1),
|
|
outbound(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the flow direction which will be sampled.
|
|
'inbound' - sample ingress packets.
|
|
'outbound' - sample egress packets."
|
|
DEFVAL { inbound }
|
|
::= { dSFlowFsEntry 4 }
|
|
|
|
dSFlowFsAdminSamplingRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured sampling rate for packet sampling from this
|
|
source.
|
|
|
|
Set to N to sample 1/Nth of the packets in the monitored flows.
|
|
An agent should choose its own algorithm to introduce variance
|
|
into the sampling so that exactly every Nth packet is not
|
|
counted. A sampling rate of 1 counts all packets. A sampling
|
|
rate of 0 disables sampling.
|
|
|
|
The agent is permitted to have minimum and maximum allowable
|
|
values for the sampling rate. A minimum rate lets the agent
|
|
designer set an upper bound on the overhead associated with
|
|
sampling, and a maximum rate may be the result of hardware
|
|
restrictions (such as counter size). In addition not all values
|
|
between the maximum and minimum may be realizable as the
|
|
sampling rate (again because of implementation considerations).
|
|
|
|
When the sampling rate is set the agent is free to adjust the
|
|
value so that it lies between the maximum and minimum values
|
|
and has the closest achievable value.
|
|
|
|
When read, the configured sampling rate will be returned."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowFsEntry 5 }
|
|
|
|
dSFlowFsActiveSamplingRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistical sampling rate for packet sampling from this
|
|
source.
|
|
|
|
When read, the agent must return the actual sampling rate it
|
|
will be using (after the adjustments previously described). The
|
|
sampling algorithm must converge so that over time the number
|
|
of packets sampled approaches 1/Nth of the total number of
|
|
packets in the monitored flows."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowFsEntry 6 }
|
|
|
|
dSFlowFsMaximumHeaderSize OBJECT-TYPE
|
|
SYNTAX Integer32 (18..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of bytes that should be copied from a
|
|
sampled packet. The agent may have an internal maximum and
|
|
minimum permissible sizes. If an attempt is made to set this
|
|
value outside the permissible range then the agent should
|
|
adjust the value to the closest permissible value."
|
|
DEFVAL { 128 }
|
|
::= { dSFlowFsEntry 7 }
|
|
|
|
dSFlowFsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { dSFlowFsEntry 8 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Counter Polling Table
|
|
-- -----------------------------------------------------------------------------
|
|
dSFlowCpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DSFlowCpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the counter pollers within a device."
|
|
::= { dSFlowMIBObjects 6 }
|
|
|
|
dSFlowCpEntry OBJECT-TYPE
|
|
SYNTAX DSFlowCpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes of a counter poller."
|
|
INDEX {
|
|
dSFlowCpDataSource,
|
|
dSFlowCpInstance
|
|
}
|
|
::= { dSFlowCpTable 1 }
|
|
|
|
DSFlowCpEntry ::= SEQUENCE {
|
|
dSFlowCpDataSource DSFlowDataSource,
|
|
dSFlowCpInstance DSFlowInstance,
|
|
dSFlowCpReceiver DSFlowReceiver,
|
|
dSFlowCpInterval Integer32,
|
|
dSFlowCpRowStatus RowStatus
|
|
}
|
|
|
|
dSFlowCpDataSource OBJECT-TYPE
|
|
SYNTAX DSFlowDataSource
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the source of the data for the counter poller."
|
|
::= { dSFlowCpEntry 1 }
|
|
|
|
dSFlowCpInstance OBJECT-TYPE
|
|
SYNTAX DSFlowInstance
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance instance index for uniquely identifying the counter
|
|
poller when multiple Pollers are associated with one interface."
|
|
::= { dSFlowCpEntry 2 }
|
|
|
|
dSFlowCpReceiver OBJECT-TYPE
|
|
SYNTAX DSFlowReceiver
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sflow receiver's index for this counter poller."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowCpEntry 3 }
|
|
|
|
dSFlowCpInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of seconds between successive samples of the
|
|
counters associated with this data source. A sampling interval
|
|
of 0 disables counter sampling.
|
|
|
|
The agent is permitted to have minimum and maximum allowable
|
|
values for the counter polling interval. A minimum interval
|
|
lets the agent designer set an upper bound on the overhead
|
|
associated with polling, and a maximum interval may be the
|
|
result of implementation restrictions (such as counter size).
|
|
In addition not all values between the maximum and minimum may
|
|
be realizable as the sampling interval (again because of
|
|
implementation considerations)."
|
|
DEFVAL { 0 }
|
|
::= { dSFlowCpEntry 4 }
|
|
|
|
dSFlowCpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { dSFlowCpEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- MIB Conformance statements
|
|
-- -----------------------------------------------------------------------------
|
|
dSFlowMIBCompliances OBJECT IDENTIFIER ::= { dSFlowMIBConformance 1 }
|
|
dSFlowMIBGroups OBJECT IDENTIFIER ::= { dSFlowMIBConformance 2 }
|
|
|
|
dSFlowCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
DLINKSW-SFLOW-MIB."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { dSFlowAgentGroup }
|
|
|
|
OBJECT dSFlowRcvrAddressType
|
|
DESCRIPTION
|
|
"It is compliant to support only a subset of values. For example if
|
|
the platform doesn't support IPv6, the type of 'ipv6' cannot be
|
|
configured."
|
|
|
|
OBJECT dSFlowRcvrVrfName
|
|
DESCRIPTION
|
|
"When the agent doesn't support VRF, only zero string can be set."
|
|
|
|
::= { dSFlowMIBCompliances 1 }
|
|
|
|
dSFlowAgentGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dSFlowVersion, dSFlowAgentAddressIPv4, dSFlowAgentAddressIPv6,
|
|
dSFlowRcvrOwner,dSFlowRcvrAdminTimeout,dSFlowRcvrCurrentTimeout,
|
|
dSFlowRcvrMaximumDatagramSize, dSFlowRcvrAddressType,
|
|
dSFlowRcvrAddress, dSFlowRcvrPort, dSFlowRcvrVrfName,
|
|
dSFlowRcvrDatagramVersion, dSFlowRcvrReset,
|
|
dSFlowFsReceiver, dSFlowFsDirection,
|
|
dSFlowFsAdminSamplingRate, dSFlowFsActiveSamplingRate,
|
|
dSFlowFsMaximumHeaderSize, dSFlowFsRowStatus,
|
|
dSFlowCpReceiver, dSFlowCpInterval, dSFlowCpRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing the generation and
|
|
transportation of sFlow data records."
|
|
::= { dSFlowMIBGroups 1 }
|
|
|
|
END
|
|
|