8002 lines
218 KiB
Plaintext
8002 lines
218 KiB
Plaintext
|
|
-- File Name : DRAGONWAVE-HCP-MIB.mib
|
|
-- Version : 1.3.10
|
|
-- Date : December, 2015
|
|
-- Author : DragonWave Inc.
|
|
|
|
DRAGONWAVE-HCP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
|
|
Counter32, Counter64, Unsigned32, IpAddress, Integer32
|
|
FROM SNMPv2-SMI
|
|
RowStatus, DateAndTime, DisplayString
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
horizon
|
|
FROM HORIZON-MIB
|
|
horizonEquipmentOutTrapsCounter
|
|
FROM HORIZON-EQUIPMENT-LOG-MIB
|
|
InetAddressPrefixLength, InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
hzCpModIdentity MODULE-IDENTITY
|
|
LAST-UPDATED "201403281023Z"
|
|
ORGANIZATION
|
|
"Dragonwave Inc."
|
|
CONTACT-INFO
|
|
"http://www.dragonwaveinc.com
|
|
600-411 Legget Drive
|
|
Ottawa, Ontario
|
|
Canada, K2K 3C9
|
|
|
|
Tel : 613-599-9991
|
|
Fax: 613-599-4265
|
|
Support: 613-271-7010"
|
|
DESCRIPTION
|
|
"This specifies the contact information and the revision tracking information for the MIB module version."
|
|
|
|
REVISION "201301171109Z"
|
|
DESCRIPTION
|
|
"The MIB module for Dragonwave HCP product."
|
|
|
|
REVISION "201403281028Z"
|
|
DESCRIPTION
|
|
"Added PM Rspi Threshold table."
|
|
|
|
REVISION "201411241712Z"
|
|
DESCRIPTION
|
|
"Added support for IPv6 auto discovery. Added PM Adv Threshold table."
|
|
|
|
REVISION "201512101712Z"
|
|
DESCRIPTION
|
|
"Added a new hzCpConfigChanged trap."
|
|
|
|
::= { horizonCompactPlus 1000 }
|
|
|
|
|
|
-- Important!! For HP OpenView, the following OID definition for ISO must be commented out,
|
|
-- otherwise it won't compile. HP openView has already defined ISO.
|
|
-- iso OBJECT IDENTIFIER ::= { 1 }
|
|
|
|
horizonCompactPlus OBJECT IDENTIFIER ::= { horizon 5 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
hzCpSystem OBJECT IDENTIFIER ::= { horizonCompactPlus 1 }
|
|
|
|
-- -------------
|
|
-- hzCpSystem
|
|
-- -------------
|
|
|
|
hzCpSysGeneral OBJECT IDENTIFIER ::= { hzCpSystem 1 }
|
|
hzCpSysSpeed OBJECT IDENTIFIER ::= { hzCpSystem 2 }
|
|
hzCpSysUpgradeSpeed OBJECT IDENTIFIER ::= { hzCpSysSpeed 3 }
|
|
hzCpSysDowngradeSpeed OBJECT IDENTIFIER ::= { hzCpSysSpeed 4 }
|
|
hzCpInventory OBJECT IDENTIFIER ::= { hzCpSystem 3 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpInventory
|
|
-- ----------------------------
|
|
|
|
hzCpHwInventory OBJECT IDENTIFIER ::= { hzCpInventory 1 }
|
|
hzCpSwInventory OBJECT IDENTIFIER ::= { hzCpInventory 2 }
|
|
hzCpPeerSysInfo OBJECT IDENTIFIER ::= { hzCpSystem 4 }
|
|
hzCpSysRedundancy OBJECT IDENTIFIER ::= { hzCpSystem 5 }
|
|
hzCpRedundancyLinkSwitchParameters OBJECT IDENTIFIER ::= { hzCpSysRedundancy 6 }
|
|
hzCpRedundancyLinkMonitorParameters OBJECT IDENTIFIER ::= { hzCpSysRedundancy 7 }
|
|
hzCpPartnerSysInfo OBJECT IDENTIFIER ::= { hzCpSysRedundancy 8 }
|
|
hzCpPeerPartnerSysInfo OBJECT IDENTIFIER ::= { hzCpSysRedundancy 9 }
|
|
hzCpPartnerCommunication OBJECT IDENTIFIER ::= { hzCpSysRedundancy 10 }
|
|
hzCpRedundancyStatus OBJECT IDENTIFIER ::= { hzCpSysRedundancy 11 }
|
|
hzCpSysDiagnostics OBJECT IDENTIFIER ::= { hzCpSystem 6 }
|
|
|
|
-- -------------
|
|
-- hzCpSysDiagnostics
|
|
-- -------------
|
|
|
|
hzCpLoopback OBJECT IDENTIFIER ::= { hzCpSysDiagnostics 1 }
|
|
hzCpHitlessAamDiagnostics OBJECT IDENTIFIER ::= { hzCpSysDiagnostics 2 }
|
|
hzCpSysLicensedFeatureGroups OBJECT IDENTIFIER ::= { hzCpSystem 7 }
|
|
hzCpPeerAuthentication OBJECT IDENTIFIER ::= { hzCpSystem 8 }
|
|
hzCpCalendar OBJECT IDENTIFIER ::= { hzCpSystem 9 }
|
|
hzCpSntp OBJECT IDENTIFIER ::= { hzCpSystem 10 }
|
|
hzCpSyncE OBJECT IDENTIFIER ::= { hzCpSystem 11 }
|
|
hzCpBac OBJECT IDENTIFIER ::= { hzCpSystem 12 }
|
|
hzCpEcfmVsm OBJECT IDENTIFIER ::= { hzCpSystem 13 }
|
|
hzCpBandwidthVsm OBJECT IDENTIFIER ::= { hzCpEcfmVsm 1 }
|
|
hzCpPM OBJECT IDENTIFIER ::= { hzCpSystem 14 }
|
|
hzCpManagement OBJECT IDENTIFIER ::= { horizonCompactPlus 2 }
|
|
hzCpNetworkManagementInterface OBJECT IDENTIFIER ::= { hzCpManagement 4 }
|
|
hzCpNetMgmtInterfaceVlan OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 1 }
|
|
hzCpNetMgmtIpv4 OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 2 }
|
|
|
|
-- Reserved
|
|
|
|
hzCpNetMgmttIpv6 OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 3 }
|
|
hzCpSnmp OBJECT IDENTIFIER ::= { hzCpManagement 5 }
|
|
hzCpTrapConfig OBJECT IDENTIFIER ::= { hzCpManagement 6 }
|
|
|
|
-- ----------------------------
|
|
-- TRAP ENABLE
|
|
-- ----------------------------
|
|
|
|
hzCpTrapEnable OBJECT IDENTIFIER ::= { hzCpTrapConfig 3 }
|
|
hzCpRadius OBJECT IDENTIFIER ::= { hzCpManagement 7 }
|
|
hzCpManagementSessions OBJECT IDENTIFIER ::= { hzCpManagement 8 }
|
|
hzCpHttp OBJECT IDENTIFIER ::= { hzCpManagement 9 }
|
|
hzCpHttpSecure OBJECT IDENTIFIER ::= { hzCpHttp 2 }
|
|
hzCpNetworkInterface OBJECT IDENTIFIER ::= { horizonCompactPlus 3 }
|
|
hzCpEnetPort OBJECT IDENTIFIER ::= { hzCpNetworkInterface 1 }
|
|
hzCpEnetAggregatedStats OBJECT IDENTIFIER ::= { hzCpEnetPort 4 }
|
|
hzCpEnetAggregatedLcStats OBJECT IDENTIFIER ::= { hzCpEnetPort 6 }
|
|
hzCpWirelessInterface OBJECT IDENTIFIER ::= { horizonCompactPlus 4 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpWirelessInterface
|
|
-- ----------------------------
|
|
|
|
hzCpWirelessInterfaceNames OBJECT IDENTIFIER ::= { hzCpWirelessInterface 1 }
|
|
hzCpWirelessInterfaceModems OBJECT IDENTIFIER ::= { hzCpWirelessInterface 2 }
|
|
hzCpWirelessAggregateStats OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceModems 3 }
|
|
hzCpWirelessAggregateLcStats OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceModems 5 }
|
|
|
|
-- hzCpWirelessInterfaceIF OBJECT IDENTIFIER ::= { hzCpWirelessInterface 3 }
|
|
|
|
hzCpWirelessInterfaceRadios OBJECT IDENTIFIER ::= { hzCpWirelessInterface 4 }
|
|
hzCpWirelessInterfaceRadioFrequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterface 5 }
|
|
hzCpWirelessInterfaceRadio1Frequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadioFrequencies 1 }
|
|
|
|
-- --------------------------------------
|
|
-- hzCpWirelessInterfaceRadioFrequencies
|
|
-- --------------------------------------
|
|
|
|
hzCpRadio1ProgrammedFrequency OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadio1Frequencies 4 }
|
|
|
|
-- hzCpWirelessInterfaceRadio2Frequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadioFrequencies 2 }
|
|
-- hzCpRadio2ProgrammedFrequency OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadio2Frequencies 5 }
|
|
|
|
hzCpWirelessInterfaceAntenna OBJECT IDENTIFIER ::= { hzCpWirelessInterface 6 }
|
|
hzCpAlarms OBJECT IDENTIFIER ::= { horizonCompactPlus 5 }
|
|
hzCpThresholdAlarmConfig OBJECT IDENTIFIER ::= { hzCpAlarms 1 }
|
|
|
|
--
|
|
-- hzCpThresholdAlarmConfig
|
|
--
|
|
|
|
hzCpAggregatedThresholdAlarm OBJECT IDENTIFIER ::= { hzCpThresholdAlarmConfig 1 }
|
|
hzCpQBasedThresholdAlarm OBJECT IDENTIFIER ::= { hzCpThresholdAlarmConfig 2 }
|
|
hzCpQos OBJECT IDENTIFIER ::= { horizonCompactPlus 6 }
|
|
hzCpRapidLinkShutdown OBJECT IDENTIFIER ::= { horizonCompactPlus 7 }
|
|
hzCpLogs OBJECT IDENTIFIER ::= { horizonCompactPlus 8 }
|
|
hzCpSysLog OBJECT IDENTIFIER ::= { hzCpLogs 4 }
|
|
hzCpAtpc OBJECT IDENTIFIER ::= { horizonCompactPlus 9 }
|
|
hzCpHitlessAam OBJECT IDENTIFIER ::= { horizonCompactPlus 10 }
|
|
hzCpSnmpNotifications OBJECT IDENTIFIER ::= { horizonCompactPlus 11 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpGeneral
|
|
-- ----------------------------
|
|
|
|
hzCpResetSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing '1' to this object resets the system."
|
|
::= { hzCpSysGeneral 1 }
|
|
|
|
hzCpSaveMIB OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
save (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing '1' or 'save' to this object save all MIB values."
|
|
::= { hzCpSysGeneral 2 }
|
|
|
|
hzCpOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2),
|
|
testing (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the system.
|
|
Testing indicates that no operational packets can be passed."
|
|
::= { hzCpSysGeneral 3 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpSysSpeed
|
|
-- ----------------------------
|
|
|
|
hzCpSystemCurrentSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Changes the working speed of the system."
|
|
::= { hzCpSysSpeed 1 }
|
|
|
|
hzCpSystemLicensedSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps."
|
|
::= { hzCpSysSpeed 2 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpSysUpgradeSpeed
|
|
-- ----------------------------
|
|
|
|
hzCpLicensedSpeedUpgradeSpeedAndKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter your key here along with the maximum speed for that key to upgrade the system speed.
|
|
|
|
Format: [speed] [key]
|
|
Example: 800 abc123"
|
|
::= { hzCpSysUpgradeSpeed 1 }
|
|
|
|
hzCpLicensedSpeedCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system."
|
|
::= { hzCpSysUpgradeSpeed 2 }
|
|
|
|
-- ----------------------------
|
|
-- hzQtmSysDowngradeSpeed
|
|
-- ----------------------------
|
|
|
|
hzCpLicensedSpeedDowngradeSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reduce your licensed speed by entering a speed to this object and take note of the generated key in hzCpLicensedSpeedConfirmationKey.
|
|
|
|
Format: [speed]
|
|
Example: 200"
|
|
::= { hzCpSysDowngradeSpeed 1 }
|
|
|
|
hzCpLicensedSpeedCountUsedForKey OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system."
|
|
::= { hzCpSysDowngradeSpeed 2 }
|
|
|
|
hzCpLicensedSpeedConfirmationKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object will show a 'key' after successfully downgrading the license speed."
|
|
::= { hzCpSysDowngradeSpeed 3 }
|
|
|
|
hzCpSysDowngradeSpeedDecrement OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the difference for the dropped speed."
|
|
::= { hzCpSysDowngradeSpeed 4 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpHwInventory
|
|
-- ----------------------------
|
|
|
|
hzCpFrequencyFilePartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Part Number of the Frequency File"
|
|
::= { hzCpHwInventory 1 }
|
|
|
|
hzCpUnitSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Serial Number of the Unit."
|
|
::= { hzCpHwInventory 2 }
|
|
|
|
hzCpUnitAssemblyNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing the Assembly Number of the Unit."
|
|
::= { hzCpHwInventory 3 }
|
|
|
|
hzCpModemSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Serial no of the Modem."
|
|
::= { hzCpHwInventory 4 }
|
|
|
|
hzCpModemAssemblyNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing assembly no of the Modem."
|
|
::= { hzCpHwInventory 5 }
|
|
|
|
hzCpPsuSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Serial no of the PSU."
|
|
::= { hzCpHwInventory 6 }
|
|
|
|
hzCpPsuAssemblyNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing assembly no of the PSU."
|
|
::= { hzCpHwInventory 7 }
|
|
|
|
hzCpRfSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Serial no of the RF."
|
|
::= { hzCpHwInventory 8 }
|
|
|
|
hzCpRfAssemblyNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing assembly no of the RF."
|
|
::= { hzCpHwInventory 9 }
|
|
|
|
hzCpDiplexerSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing Serial no of the Diplexer."
|
|
::= { hzCpHwInventory 10 }
|
|
|
|
hzCpDiplexerAssemblyNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing assembly no of the Diplexer."
|
|
::= { hzCpHwInventory 11 }
|
|
|
|
hzCpSystemCleiNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing system CLEI code."
|
|
::= { hzCpHwInventory 12 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpSwInventory
|
|
-- ----------------------------
|
|
|
|
hzCpSwInventoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSwInventoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains the software inventory."
|
|
::= { hzCpSwInventory 1 }
|
|
|
|
hzCpSwInventoryEntry OBJECT-TYPE
|
|
SYNTAX HzCpSwInventoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Software inventory entry."
|
|
INDEX { hzCpSwInvBank }
|
|
::= { hzCpSwInventoryTable 1 }
|
|
|
|
HzCpSwInventoryEntry ::= SEQUENCE {
|
|
hzCpSwInvBank
|
|
INTEGER,
|
|
hzCpSwInvStatus
|
|
INTEGER,
|
|
hzCpSwInvOmniRelease
|
|
DisplayString,
|
|
hzCpSwInvFrequencyFileVersion
|
|
DisplayString,
|
|
hzCpSwInvMibVersion
|
|
DisplayString,
|
|
hzCpSwInvBootloaderVersion
|
|
DisplayString
|
|
}
|
|
|
|
hzCpSwInvBank OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bank-A (1),
|
|
bank-B (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Software bank in the flash. "
|
|
::= { hzCpSwInventoryEntry 1 }
|
|
|
|
hzCpSwInvStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
standby (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Software bank status. "
|
|
::= { hzCpSwInventoryEntry 2 }
|
|
|
|
hzCpSwInvOmniRelease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the Omni."
|
|
::= { hzCpSwInventoryEntry 3 }
|
|
|
|
hzCpSwInvFrequencyFileVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the frequency file."
|
|
::= { hzCpSwInventoryEntry 4 }
|
|
|
|
hzCpSwInvMibVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the system MIB."
|
|
::= { hzCpSwInventoryEntry 5 }
|
|
|
|
hzCpSwInvBootloaderVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the bootloader."
|
|
::= { hzCpSwInventoryEntry 6 }
|
|
|
|
-- ----------------------
|
|
-- hzCpPeerSysInfo
|
|
-- ---------------------
|
|
|
|
hzCpPeerMacAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the peer network interface card."
|
|
::= { hzCpPeerSysInfo 1 }
|
|
|
|
hzCpPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the peer network interface card."
|
|
::= { hzCpPeerSysInfo 2 }
|
|
|
|
hzCpPeerSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for the peer network interface card."
|
|
::= { hzCpPeerSysInfo 3 }
|
|
|
|
hzCpPeerDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway address of the peer node."
|
|
::= { hzCpPeerSysInfo 4 }
|
|
|
|
hzCpPeerIpv6Prefix OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IPv6 prefix."
|
|
::= { hzCpPeerSysInfo 5 }
|
|
|
|
hzCpPeerIpv6Domain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IPv6 domain."
|
|
::= { hzCpPeerSysInfo 6 }
|
|
|
|
hzCpPeerIpv6Address OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IPv6 address."
|
|
::= { hzCpPeerSysInfo 7 }
|
|
|
|
hzCpPeerIpv6GatewayDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IPv6 gateway domain."
|
|
::= { hzCpPeerSysInfo 8 }
|
|
|
|
hzCpPeerIpv6GatewayAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer IPv6 gateway address."
|
|
::= { hzCpPeerSysInfo 9 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpSysRedundancy
|
|
-- ----------------------------
|
|
|
|
hzCpRedundancyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
primary-hsb (2),
|
|
secondary-hsb (3),
|
|
primary-x2 (4),
|
|
secondary-x2 (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"allows the user to set system redundancy mode:
|
|
[ off | primary-hsb | secondary-hsb | primary-x2 | secondary-x2 ]"
|
|
::= { hzCpSysRedundancy 1 }
|
|
|
|
hzCpRedundancySwitchMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
force-active (2),
|
|
force-standby (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the user to override the active link. User can force the link to stay on either force-active, force-standby, auto or manual."
|
|
::= { hzCpSysRedundancy 2 }
|
|
|
|
hzCpRedundancyStandbyEnetState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2),
|
|
pulse (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the user to set standby payload port state."
|
|
::= { hzCpSysRedundancy 3 }
|
|
|
|
hzCpRedundancyStateSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the user to switch redundancy state."
|
|
::= { hzCpSysRedundancy 4 }
|
|
|
|
hzCpRedundancyMgmtSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local-node (1),
|
|
active-node (2),
|
|
standby-node (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to local-node, each node is managed locally through specified management interface. When set to standby-node, the management traffic for the partner is processed through the standby node interface."
|
|
::= { hzCpSysRedundancy 5 }
|
|
|
|
hzCpRedundancyPrimaryTimeInActiveState OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time, in miliseconds, given to the primary unit to establish a link once it becomes active."
|
|
::= { hzCpRedundancyLinkSwitchParameters 1 }
|
|
|
|
hzCpRedundancyPrimarySwitchErrorThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percent of allowed bad blocks, on the primary unit, needed to establish a link."
|
|
::= { hzCpRedundancyLinkSwitchParameters 2 }
|
|
|
|
hzCpRedundancySecondaryTimeInActiveState OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time, in miliseconds, given to the secondary unit to establish a link once it becomes active."
|
|
::= { hzCpRedundancyLinkSwitchParameters 3 }
|
|
|
|
hzCpRedundancySecondarySwitchErrorThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percent of allowed bad blocks, on the secondary unit, needed to establish a link."
|
|
::= { hzCpRedundancyLinkSwitchParameters 4 }
|
|
|
|
hzCpRedundancyFaultPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period of time, in milliseconds, for which the Fault Threshold is applied."
|
|
::= { hzCpRedundancyLinkMonitorParameters 1 }
|
|
|
|
hzCpRedundancyFaultThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum percentage of the bad blocks allowed in specified Fault Sample Period to maintain link when in active state."
|
|
::= { hzCpRedundancyLinkMonitorParameters 2 }
|
|
|
|
hzCpPartnerMacAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the partner node."
|
|
::= { hzCpPartnerSysInfo 1 }
|
|
|
|
hzCpPartnerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the partner node."
|
|
::= { hzCpPartnerSysInfo 2 }
|
|
|
|
hzCpPartnerSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for the partner node."
|
|
::= { hzCpPartnerSysInfo 3 }
|
|
|
|
hzCpPartnerDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway address of the partner node."
|
|
::= { hzCpPartnerSysInfo 4 }
|
|
|
|
hzCpPartnerIpv6Prefix OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 prefix of the partner node."
|
|
::= { hzCpPartnerSysInfo 5 }
|
|
|
|
hzCpPartnerIpv6Domain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 domain of the partner node."
|
|
::= { hzCpPartnerSysInfo 6 }
|
|
|
|
hzCpPartnerIpv6Address OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the partner node."
|
|
::= { hzCpPartnerSysInfo 7 }
|
|
|
|
hzCpPartnerIpv6GatewayDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 gateway domain of the partner node."
|
|
::= { hzCpPartnerSysInfo 8 }
|
|
|
|
hzCpPartnerIpv6GatewayAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 gateway address of the partner node."
|
|
::= { hzCpPartnerSysInfo 9 }
|
|
|
|
hzCpPeerPartnerMacAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 1 }
|
|
|
|
hzCpPeerPartnerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 2 }
|
|
|
|
hzCpPeerPartnerSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 3 }
|
|
|
|
hzCpPeerPartnerDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway address of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 4 }
|
|
|
|
hzCpPeerPartnerIpv6Prefix OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 prefix of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 5 }
|
|
|
|
hzCpPeerPartnerIpv6Domain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 domain of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 6 }
|
|
|
|
hzCpPeerPartnerIpv6Address OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 7 }
|
|
|
|
hzCpPeerPartnerIpv6GatewayDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 gateway domain of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 8 }
|
|
|
|
hzCpPeerPartnerIpv6GatewayAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 gateway address of the partner's peer node."
|
|
::= { hzCpPeerPartnerSysInfo 9 }
|
|
|
|
hzCpPartnerAutoDiscovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables or enables the partner's auto discovery."
|
|
::= { hzCpPartnerCommunication 1 }
|
|
|
|
hzCpPartnerMacAddressOverride OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address for partner to be used when the auto discovery is disabled."
|
|
::= { hzCpPartnerCommunication 2 }
|
|
|
|
hzCpPartnerVlanTagging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables or enables the VLAN tagging for partner's communication. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to."
|
|
::= { hzCpPartnerCommunication 3 }
|
|
|
|
hzCpPartnerVlanTagId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN Tag Id (1...4095) for partner's communication."
|
|
::= { hzCpPartnerCommunication 4 }
|
|
|
|
hzCpPartnerVlanTagPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for VLAN tagging (0...7) for partner's communication."
|
|
::= { hzCpPartnerCommunication 5 }
|
|
|
|
hzCpRedundancyUserTrafficStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the redundancy user traffic status."
|
|
::= { hzCpRedundancyStatus 1 }
|
|
|
|
hzCpRedundancyWirelessLinkStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the redundancy wireless link status."
|
|
::= { hzCpRedundancyStatus 2 }
|
|
|
|
hzCpRedundancyEnetCrossLinkStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the redundancy ethernet cross link status. Primary node is active and processing user traffic at one end of the link, and secondary node is active at the other end of the link resulting in end to end cross connection to user network equipment."
|
|
::= { hzCpRedundancyStatus 3 }
|
|
|
|
hzCpRedundancyPortGroupStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the redundancy port group status."
|
|
::= { hzCpRedundancyStatus 4 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpLoopback
|
|
-- ----------------------------
|
|
|
|
hzCpLoopbackType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
radioNonNetwork (2),
|
|
radioNetwork (3),
|
|
networkNearEnd (4),
|
|
networkFarEnd (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What the user sets is cached until the loopback is started. The get returns the running status of the active loopback type. "
|
|
::= { hzCpLoopback 1 }
|
|
|
|
hzCpLoopbackTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The loopback timeout period."
|
|
::= { hzCpLoopback 2 }
|
|
|
|
hzCpLoopbackNetworkMac OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address used for network loopback."
|
|
::= { hzCpLoopback 3 }
|
|
|
|
hzCpLoopbackNetworkQueue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user queue used for far-end network loopback."
|
|
::= { hzCpLoopback 4 }
|
|
|
|
hzCpLoopbackNetworkPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user enet port used for network loopback."
|
|
::= { hzCpLoopback 5 }
|
|
|
|
hzCpLoopbackStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
start (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start the loopback by writing '1' to this object."
|
|
::= { hzCpLoopback 6 }
|
|
|
|
hzCpLoopbackStop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stop the loopback by writing '1' to this object."
|
|
::= { hzCpLoopback 7 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpHitlessAamDiagnostics
|
|
-- ----------------------------
|
|
|
|
hzCpHitlessAamModemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpHitlessAamModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Modems"
|
|
::= { hzCpHitlessAamDiagnostics 1 }
|
|
|
|
hzCpHitlessAamModemEntry OBJECT-TYPE
|
|
SYNTAX HzCpHitlessAamModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Wireless Interface Modem"
|
|
INDEX { hzCpHitlessAamModemIndex }
|
|
::= { hzCpHitlessAamModemTable 1 }
|
|
|
|
HzCpHitlessAamModemEntry ::= SEQUENCE {
|
|
hzCpHitlessAamModemIndex
|
|
INTEGER,
|
|
hzCpHitlessAamModemDiagnose
|
|
INTEGER,
|
|
hzCpHitlessAamModemDiagnosticResult
|
|
DisplayString
|
|
}
|
|
|
|
hzCpHitlessAamModemIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
modem-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpHitlessAamModemEntry 1 }
|
|
|
|
hzCpHitlessAamModemDiagnose OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem. Poll the hzCpHitlessAamModemDiagnosticResult object to determine the results."
|
|
::= { hzCpHitlessAamModemEntry 2 }
|
|
|
|
hzCpHitlessAamModemDiagnosticResult OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result from Hitless AAM Diagnostic is read from this object."
|
|
::= { hzCpHitlessAamModemEntry 3 }
|
|
|
|
hzCpCodeCheckCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter representing the number of queue-freezup error correction that has encountered in the system."
|
|
::= { hzCpSysDiagnostics 3 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpSysLicensedFeatureGroups
|
|
-- ----------------------------
|
|
|
|
hzCpSysUpgradeFeatureGroupsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSysUpgradeFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of system upgrade feature groups."
|
|
::= { hzCpSysLicensedFeatureGroups 1 }
|
|
|
|
hzCpSysUpgradeFeatureGroupsEntry OBJECT-TYPE
|
|
SYNTAX HzCpSysUpgradeFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system upgrade feature group entry containing all licensed feature groups."
|
|
INDEX { hzCpUpgradeLicensedFeatureIndex }
|
|
::= { hzCpSysUpgradeFeatureGroupsTable 1 }
|
|
|
|
HzCpSysUpgradeFeatureGroupsEntry ::= SEQUENCE {
|
|
hzCpUpgradeLicensedFeatureIndex
|
|
INTEGER,
|
|
hzCpUpgradeLicensedFeatureKey
|
|
DisplayString,
|
|
hzCpUpgradeLicensedFeatureCount
|
|
Integer32
|
|
}
|
|
|
|
hzCpUpgradeLicensedFeatureIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rls (1),
|
|
eoamEcfmLldp (2),
|
|
hitlessAam (3),
|
|
bac (4),
|
|
encryption (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each licensed group. "
|
|
::= { hzCpSysUpgradeFeatureGroupsEntry 1 }
|
|
|
|
hzCpUpgradeLicensedFeatureKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key required for upgrading a feature."
|
|
::= { hzCpSysUpgradeFeatureGroupsEntry 2 }
|
|
|
|
hzCpUpgradeLicensedFeatureCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the licensed feature has been changed successfully."
|
|
::= { hzCpSysUpgradeFeatureGroupsEntry 3 }
|
|
|
|
hzCpSysDowngradeFeatureGroupsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSysDowngradeFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of system downgrade system groups."
|
|
::= { hzCpSysLicensedFeatureGroups 2 }
|
|
|
|
hzCpSysDowngradeFeatureGroupsEntry OBJECT-TYPE
|
|
SYNTAX HzCpSysDowngradeFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system downgrade feature group entry containing all licensed feature groups."
|
|
INDEX { hzCpDowngradeLicensedFeatureIndex }
|
|
::= { hzCpSysDowngradeFeatureGroupsTable 1 }
|
|
|
|
HzCpSysDowngradeFeatureGroupsEntry ::= SEQUENCE {
|
|
hzCpDowngradeLicensedFeatureIndex
|
|
INTEGER,
|
|
hzCpDowngradeLicensedFeature
|
|
INTEGER,
|
|
hzCpDowngradeLicensedFeatureCount
|
|
Integer32,
|
|
hzCpDowngradeLicensedFeatureKey
|
|
DisplayString
|
|
}
|
|
|
|
hzCpDowngradeLicensedFeatureIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rls (1),
|
|
eoamEcfmLldp (2),
|
|
hitlessAam (3),
|
|
bac (4),
|
|
encryption (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each licensed group. "
|
|
::= { hzCpSysDowngradeFeatureGroupsEntry 1 }
|
|
|
|
hzCpDowngradeLicensedFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
downgrade (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Downgrading a licensed feature."
|
|
::= { hzCpSysDowngradeFeatureGroupsEntry 2 }
|
|
|
|
hzCpDowngradeLicensedFeatureCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the licensed feature has been downgraded."
|
|
::= { hzCpSysDowngradeFeatureGroupsEntry 3 }
|
|
|
|
hzCpDowngradeLicensedFeatureKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key generated after downgrading a licensed feature."
|
|
::= { hzCpSysDowngradeFeatureGroupsEntry 4 }
|
|
|
|
hzCpSysLicensedFeatureGroupsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSysLicensedFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of licensed feature groups."
|
|
::= { hzCpSysLicensedFeatureGroups 3 }
|
|
|
|
hzCpSysLicensedFeatureGroupsEntry OBJECT-TYPE
|
|
SYNTAX HzCpSysLicensedFeatureGroupsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system feature group entry containing all licensed feature groups."
|
|
INDEX { hzCpSysLicensedFeatureGroupIndex }
|
|
::= { hzCpSysLicensedFeatureGroupsTable 1 }
|
|
|
|
HzCpSysLicensedFeatureGroupsEntry ::= SEQUENCE {
|
|
hzCpSysLicensedFeatureGroupIndex
|
|
INTEGER,
|
|
hzCpSysLicensedFeatureGroup
|
|
DisplayString,
|
|
hzCpSysLicensedFeatureGroupStatus
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSysLicensedFeatureGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rls (1),
|
|
eoamEcfmLldp (2),
|
|
hitlessAam (3),
|
|
bac (4),
|
|
encryption (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each licensed group. "
|
|
::= { hzCpSysLicensedFeatureGroupsEntry 1 }
|
|
|
|
hzCpSysLicensedFeatureGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the licensed feature group."
|
|
::= { hzCpSysLicensedFeatureGroupsEntry 2 }
|
|
|
|
hzCpSysLicensedFeatureGroupStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unlicensed (1),
|
|
licensed (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the feature group is unlicensed or licensed."
|
|
::= { hzCpSysLicensedFeatureGroupsEntry 3 }
|
|
|
|
-- - ----------------------------
|
|
-- hzCpAuthentication
|
|
-- ----------------------------
|
|
|
|
hzCpPeerAuthenticationUniqueKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..34))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of the peer node that this node will communicate with.
|
|
This is only used when authentication mode is set to unique."
|
|
::= { hzCpPeerAuthentication 1 }
|
|
|
|
hzCpPeerAuthenticationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
unique (2),
|
|
group (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the authentication mode for the system. If configured for unique
|
|
authentication, a node only exchanges user traffic with one other
|
|
node. The serial number is used in this case.
|
|
|
|
If configured for group authentication, a node exchanges user
|
|
traffic with another node of the same group and uses the
|
|
authentication keys.
|
|
"
|
|
DEFVAL { none }
|
|
::= { hzCpPeerAuthentication 2 }
|
|
|
|
hzCpPeerAuthenticationFailureAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blockTraffic (1),
|
|
passTraffic (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the authentication failure action for the system.
|
|
|
|
Block traffic will block all user traffic including remote
|
|
management access. Pass traffic will allow all user traffic
|
|
to be sent and recieved
|
|
"
|
|
DEFVAL { blockTraffic }
|
|
::= { hzCpPeerAuthentication 3 }
|
|
|
|
hzCpPeerAuthenticationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAuthenticated (1),
|
|
authenticated (2),
|
|
explicitAuthenticationFailure (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current authentication status of the system.
|
|
|
|
Authenticated means authentication is on and the system
|
|
has been authenticated, notAuthenticated means authentication
|
|
is off or the system has not communicated yet with the other node,
|
|
explicit authentication failure means authentication is on and
|
|
authentication has failed"
|
|
::= { hzCpPeerAuthentication 4 }
|
|
|
|
hzCpPeerAuthenticationGroupKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..34))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of the group that this node will communicate within.
|
|
This is only used when authentication mode is set to group."
|
|
::= { hzCpPeerAuthentication 5 }
|
|
|
|
--
|
|
-- hzCpCalendar
|
|
--
|
|
|
|
hzCpDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string in the format as follows:
|
|
XX/YY/ZZ
|
|
Where XX = day of month (range 01 to 31)
|
|
YY = month of year(range 01 to 12)
|
|
ZZ = year (range 01 - 99)"
|
|
::= { hzCpCalendar 1 }
|
|
|
|
hzCpTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string in the format as follows:
|
|
aa:bb:cc.ddd
|
|
Where aa = hour of day ( range 00 to 23 )
|
|
bb = minute of hour ( range 00 to 59 )
|
|
cc = second of minute( range 00 to 59 )
|
|
ddd = thousandths of second (range 000 to 999)"
|
|
::= { hzCpCalendar 2 }
|
|
|
|
hzCpDateAndTimeForLastTimeChange OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and Time for the last System time adjustment"
|
|
::= { hzCpCalendar 3 }
|
|
|
|
hzCpLastTimeChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last System time adjustment in hundredths of seconds"
|
|
::= { hzCpCalendar 4 }
|
|
|
|
hzCpCumulativeTimeChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cumulative System time adjustmen in hundredths of seconds"
|
|
::= { hzCpCalendar 5 }
|
|
|
|
--
|
|
-- hzCpSntp
|
|
--
|
|
|
|
hzCpSntpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether SNTP feature is enabled."
|
|
DEFVAL { enabled }
|
|
::= { hzCpSntp 1 }
|
|
|
|
hzCpSntpOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (-140..140)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour."
|
|
DEFVAL { -40 }
|
|
::= { hzCpSntp 2 }
|
|
|
|
hzCpSntpServerDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSntpServerDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table containing SNTP server entries"
|
|
::= { hzCpSntp 3 }
|
|
|
|
hzCpSntpServerDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpSntpServerDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Contains the SNTP server information"
|
|
INDEX { hzCpSntpServerIpAddressDep }
|
|
::= { hzCpSntpServerDepTable 1 }
|
|
|
|
HzCpSntpServerDepEntry ::= SEQUENCE {
|
|
hzCpSntpServerIndexDep
|
|
Integer32,
|
|
hzCpSntpServerIpAddressDep
|
|
IpAddress,
|
|
hzCpSntpServerStatusDep
|
|
INTEGER,
|
|
hzCpSntpServerStratumDep
|
|
Integer32
|
|
}
|
|
|
|
hzCpSntpServerIndexDep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A unique value for each server."
|
|
::= { hzCpSntpServerDepEntry 1 }
|
|
|
|
hzCpSntpServerIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the SNTP server. This object is deprecated by hzCpSntpServerAddress.
|
|
The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSntpServerDepEntry 2 }
|
|
|
|
hzCpSntpServerStatusDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
good (1),
|
|
failed (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of the SNTP server."
|
|
::= { hzCpSntpServerDepEntry 3 }
|
|
|
|
hzCpSntpServerStratumDep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Specifies the stratum of a server, 0 for failed server"
|
|
::= { hzCpSntpServerDepEntry 4 }
|
|
|
|
hzCpSntpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing SNTP server entries"
|
|
::= { hzCpSntp 4 }
|
|
|
|
hzCpSntpServerEntry OBJECT-TYPE
|
|
SYNTAX HzCpSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the SNTP server information"
|
|
INDEX { hzCpSntpServerIndex }
|
|
::= { hzCpSntpServerTable 1 }
|
|
|
|
HzCpSntpServerEntry ::= SEQUENCE {
|
|
hzCpSntpServerIndex
|
|
Integer32,
|
|
hzCpSntpServerDomain
|
|
InetAddressType,
|
|
hzCpSntpServerAddress
|
|
InetAddress,
|
|
hzCpSntpServerStatus
|
|
INTEGER,
|
|
hzCpSntpServerStratum
|
|
Integer32
|
|
}
|
|
|
|
hzCpSntpServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each server."
|
|
::= { hzCpSntpServerEntry 1 }
|
|
|
|
hzCpSntpServerDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates SNTP server inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpSntpServerEntry 2 }
|
|
|
|
hzCpSntpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates SNTP server inet address octet string. "
|
|
::= { hzCpSntpServerEntry 3 }
|
|
|
|
hzCpSntpServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
good (1),
|
|
failed (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the SNTP server."
|
|
::= { hzCpSntpServerEntry 4 }
|
|
|
|
hzCpSntpServerStratum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the stratum of a server, 0 for failed server"
|
|
::= { hzCpSntpServerEntry 5 }
|
|
|
|
hzCpSntpRestoreDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restore (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Restores SNTP servers to default Addresses."
|
|
::= { hzCpSntp 5 }
|
|
|
|
hzCpSyncEState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
manual (2),
|
|
auto (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In manual mode, syncE source will use primary clock source and when the primary source has loss of lock, the syncE goes into holdover. The primary source will be used again after it comes back.
|
|
In auto mode, if the current source has trouble, it will try to recover from the other source."
|
|
::= { hzCpSyncE 1 }
|
|
|
|
hzCpSyncEPrimarySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4),
|
|
wp1 (5),
|
|
free-run (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selects which port to be used as syncE master clock source."
|
|
::= { hzCpSyncE 2 }
|
|
|
|
hzCpSyncESecondarySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4),
|
|
wp1 (5),
|
|
free-run (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selects which port to be used as syncE secondary when the master syncE is not available."
|
|
::= { hzCpSyncE 3 }
|
|
|
|
hzCpSyncEMemberPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter a string indicating all SyncE member ports.
|
|
Example: p1 p4
|
|
Port options: p1 p2 p3 p4 wp1"
|
|
::= { hzCpSyncE 4 }
|
|
|
|
hzCpSyncEForcedHoldover OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec.
|
|
An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when holdover is the time in sec. The single quote marks i.e. ' ' are not used in the command."
|
|
::= { hzCpSyncE 5 }
|
|
|
|
hzCpSyncERevertive OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec.
|
|
An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command."
|
|
::= { hzCpSyncE 6 }
|
|
|
|
hzCpSyncEClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4),
|
|
wp1 (5),
|
|
free-run (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retrieves Synce clock source."
|
|
::= { hzCpSyncE 7 }
|
|
|
|
hzCpSyncEAcquisitionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retrieves Synce acquisition status."
|
|
::= { hzCpSyncE 8 }
|
|
|
|
hzCpSyncEWanderFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
option1 (1),
|
|
option2 (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a badwidth between 1 and10 Hz. "
|
|
::= { hzCpSyncE 9 }
|
|
|
|
hzCpBacRecordAvgPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds. "
|
|
::= { hzCpBac 1 }
|
|
|
|
hzCpBacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpBacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing BAC entries"
|
|
::= { hzCpBac 2 }
|
|
|
|
hzCpBacEntry OBJECT-TYPE
|
|
SYNTAX HzCpBacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the BAC information for all queues"
|
|
INDEX { hzCpBacQIndex }
|
|
::= { hzCpBacTable 1 }
|
|
|
|
HzCpBacEntry ::= SEQUENCE {
|
|
hzCpBacQIndex
|
|
INTEGER,
|
|
hzCpBacQEnable
|
|
INTEGER,
|
|
hzCpBacQBlockSize
|
|
Integer32,
|
|
hzCpBacRecordLogging
|
|
INTEGER,
|
|
hzCpBacUncompressedRatio
|
|
DisplayString,
|
|
hzCpBacGain
|
|
DisplayString
|
|
}
|
|
|
|
hzCpBacQIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each of the 8 Queues."
|
|
::= { hzCpBacEntry 1 }
|
|
|
|
hzCpBacQEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure queue compression state to disable/enable."
|
|
::= { hzCpBacEntry 2 }
|
|
|
|
hzCpBacQBlockSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes.
|
|
Valid block sizes are <256 512 1024 4032 8000>
|
|
"
|
|
::= { hzCpBacEntry 3 }
|
|
|
|
hzCpBacRecordLogging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio
|
|
on a per queue basis to syslog and flashlog."
|
|
::= { hzCpBacEntry 4 }
|
|
|
|
hzCpBacUncompressedRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in data over specified average period in percentage."
|
|
::= { hzCpBacEntry 5 }
|
|
|
|
hzCpBacGain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all bytes compressed and bytes uncompressed calculated over an average period."
|
|
::= { hzCpBacEntry 6 }
|
|
|
|
hzCpBwVsmVendorOui OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As string representing the vendor OUI code.
|
|
Example: 00-00-0C for Cisco"
|
|
::= { hzCpBandwidthVsm 1 }
|
|
|
|
hzCpBwVsmMdLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenanc level of Bandwidth VSM. The valid range is between 0-7. By default, the BW-VSM is associated with Maintenance Level 0."
|
|
::= { hzCpBandwidthVsm 2 }
|
|
|
|
hzCpBwVsmWaitTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wait time before sending vendor specific message."
|
|
::= { hzCpBandwidthVsm 3 }
|
|
|
|
hzCpBwVsmPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-sec (1),
|
|
ten-sec (2),
|
|
one-min (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the VSM transmission period. The default value is 10 seconds."
|
|
::= { hzCpBandwidthVsm 4 }
|
|
|
|
hzCpBwVsmVlanTag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bandwidth VSM can be configured to be transmitted with a configurable valid VLAN tag. By default, the BW-VSM will be sent untagged."
|
|
::= { hzCpBandwidthVsm 5 }
|
|
|
|
hzCpBwVsmVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the VSM VLAN Id."
|
|
::= { hzCpBandwidthVsm 6 }
|
|
|
|
hzCpBwVsmVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the VSM priority. The valid range is between 1-7 and the default priority is 7."
|
|
::= { hzCpBandwidthVsm 7 }
|
|
|
|
hzCpBwVsmPortList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific message will only be sent out through the specified ports in the list.
|
|
Port options: a comma-separted list of ports p1 to p4
|
|
Example: p1,p2"
|
|
::= { hzCpBandwidthVsm 8 }
|
|
|
|
hzCpBwVsmState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enables or disables vendor specific messaging."
|
|
::= { hzCpBandwidthVsm 9 }
|
|
|
|
hzCpPmRspiThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpPmRspiThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring table for Radio Synchronous Physical Interface thresholds."
|
|
::= { hzCpPM 1 }
|
|
|
|
hzCpPmRspiThresholdEntry OBJECT-TYPE
|
|
SYNTAX HzCpPmRspiThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains information for Radio Synchronous Physical Interface thresholds."
|
|
INDEX { hzCpPmRspiThrIndex }
|
|
::= { hzCpPmRspiThresholdTable 1 }
|
|
|
|
HzCpPmRspiThresholdEntry ::= SEQUENCE {
|
|
hzCpPmRspiThrIndex
|
|
Integer32,
|
|
hzCpPmRLT1
|
|
Integer32,
|
|
hzCpPmRLT2
|
|
Integer32,
|
|
hzCpPmRLT3
|
|
Integer32,
|
|
hzCpPmRLT4
|
|
Integer32,
|
|
hzCpPmTLT1
|
|
Integer32,
|
|
hzCpPmTLT2
|
|
Integer32,
|
|
hzCpPmRspiThrRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hzCpPmRspiThrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to PM RSPI Threshold table."
|
|
::= { hzCpPmRspiThresholdEntry 1 }
|
|
|
|
hzCpPmRLT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Level Threshold 1, represents the number of seconds below the first threshold."
|
|
::= { hzCpPmRspiThresholdEntry 2 }
|
|
|
|
hzCpPmRLT2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Level Threshold 2, represents the number of seconds below the second threshold."
|
|
::= { hzCpPmRspiThresholdEntry 3 }
|
|
|
|
hzCpPmRLT3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Level Threshold 3, represents the number of seconds below the third threshold."
|
|
::= { hzCpPmRspiThresholdEntry 4 }
|
|
|
|
hzCpPmRLT4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Level Threshold 4, represents the number of seconds below the fourth threshold."
|
|
::= { hzCpPmRspiThresholdEntry 5 }
|
|
|
|
hzCpPmTLT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Level Threshold 1, represents the number of seconds below the first threshold."
|
|
::= { hzCpPmRspiThresholdEntry 6 }
|
|
|
|
hzCpPmTLT2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Level Threshold 2, represents the number of seconds below the second threshold."
|
|
::= { hzCpPmRspiThresholdEntry 7 }
|
|
|
|
hzCpPmRspiThrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for applying all RSPI thresholds simultaneously."
|
|
::= { hzCpPmRspiThresholdEntry 8 }
|
|
|
|
hzCpPmAdvThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpPmAdvThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring table for Capacity thresholds."
|
|
::= { hzCpPM 2 }
|
|
|
|
hzCpPmAdvThresholdEntry OBJECT-TYPE
|
|
SYNTAX HzCpPmAdvThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains information for Capacity thresholds."
|
|
INDEX { hzCpPmAdvThrIndex }
|
|
::= { hzCpPmAdvThresholdTable 1 }
|
|
|
|
HzCpPmAdvThresholdEntry ::= SEQUENCE {
|
|
hzCpPmAdvThrIndex
|
|
Integer32,
|
|
hzCpPmAdvTxHitsT1
|
|
Integer32,
|
|
hzCpPmAdvRxHitsT1
|
|
Integer32,
|
|
hzCpPmAdvRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hzCpPmAdvThrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to PM Capacity Threshold table."
|
|
::= { hzCpPmAdvThresholdEntry 1 }
|
|
|
|
hzCpPmAdvTxHitsT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Hits Threshold 1."
|
|
::= { hzCpPmAdvThresholdEntry 2 }
|
|
|
|
hzCpPmAdvRxHitsT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Hits Threshold 1."
|
|
::= { hzCpPmAdvThresholdEntry 3 }
|
|
|
|
hzCpPmAdvRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for applying all Capacity thresholds simultaneously."
|
|
::= { hzCpPmAdvThresholdEntry 4 }
|
|
|
|
--
|
|
-- NetworkManagement
|
|
--
|
|
|
|
hzCpMacAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the system."
|
|
::= { hzCpManagement 1 }
|
|
|
|
hzCpTelnetAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Telnet access is allowed."
|
|
DEFVAL { enabled }
|
|
::= { hzCpManagement 2 }
|
|
|
|
hzCpSshAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether ssh access is allowed."
|
|
DEFVAL { enabled }
|
|
::= { hzCpManagement 3 }
|
|
|
|
hzCpNetMgmtPortList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the network management interface connection options. Enter a string indicating the management port.
|
|
|
|
Example: p3
|
|
Port options: p1 or p2 or p3 or p4 or dp1 or dp2 or dp3 or dp4
|
|
|
|
Note: Need to set hzCpNetMgmtAppyToSystem if you want the changes to take effect in the system."
|
|
::= { hzCpNetMgmtInterfaceVlan 1 }
|
|
|
|
hzCpNetMgmtVlanTagId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN Tag Id (1...4095).
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtInterfaceVlan 2 }
|
|
|
|
hzCpNetMgmtVlanTagPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for VLAN tagging (0...7)
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtInterfaceVlan 3 }
|
|
|
|
hzCpNetMgmtVlanTagging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables or enables VLAN tagging. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to.
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtInterfaceVlan 4 }
|
|
|
|
hzCpNetMgmtDscpPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Differentiated Serices Code Point (DSCP) priority to classify and prioritize types of traffic (0...63)
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtInterfaceVlan 5 }
|
|
|
|
hzCpIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the system.
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtIpv4 1 }
|
|
|
|
hzCpSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for the system.
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtIpv4 2 }
|
|
|
|
hzCpDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway for the system.
|
|
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmtIpv4 3 }
|
|
|
|
hzCpIpv6Domain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 inet address type. "
|
|
::= { hzCpNetMgmttIpv6 1 }
|
|
|
|
hzCpIpv6Address OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 inet address octet string.
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmttIpv6 2 }
|
|
|
|
hzCpIpv6Prefix OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 prefix.
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmttIpv6 3 }
|
|
|
|
hzCpIpv6GatewayDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 gateway inet address type. "
|
|
::= { hzCpNetMgmttIpv6 4 }
|
|
|
|
hzCpIpv6GatewayAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 gateway inet address octet string.
|
|
Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set."
|
|
::= { hzCpNetMgmttIpv6 5 }
|
|
|
|
hzCpIpv6LinkLocalDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 link local inet address type. "
|
|
::= { hzCpNetMgmttIpv6 6 }
|
|
|
|
hzCpIpv6LinkLocalAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ipv6 link local inet address octet string. "
|
|
::= { hzCpNetMgmttIpv6 7 }
|
|
|
|
hzCpNetMgmtApplyToSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If system allows, setting this oid applies all network management interface changes to the system and a system reset can be avoided."
|
|
::= { hzCpNetworkManagementInterface 4 }
|
|
|
|
--
|
|
-- SNMP MANAGERS
|
|
--
|
|
|
|
hzCpSnmpUserAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
explicitManagers (1),
|
|
any (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager with any-community-name will be able to gain SNMP access to the system"
|
|
::= { hzCpSnmp 1 }
|
|
|
|
hzCpSnmpManagerAnyCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community string name used by the 'any' manager."
|
|
::= { hzCpSnmp 2 }
|
|
|
|
hzCpSnmpSetRequests OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether SNMP SET requests are allowed."
|
|
::= { hzCpSnmp 3 }
|
|
|
|
hzCpSnmpManagersDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpManagersDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table containing snmp manager entries"
|
|
::= { hzCpSnmp 4 }
|
|
|
|
hzCpSnmpManagersDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpManagersDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Contains the snmp manager information"
|
|
INDEX { hzCpSnmpManagersIndexDep }
|
|
::= { hzCpSnmpManagersDepTable 1 }
|
|
|
|
HzCpSnmpManagersDepEntry ::= SEQUENCE {
|
|
hzCpSnmpManagersIndexDep
|
|
Integer32,
|
|
hzCpSnmpManagerIpAddressDep
|
|
IpAddress,
|
|
hzCpSnmpManagerCommunityNameDep
|
|
DisplayString,
|
|
hzCpSnmpManagerActivatedDep
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpManagersIndexDep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A unique value for each manager."
|
|
::= { hzCpSnmpManagersDepEntry 1 }
|
|
|
|
hzCpSnmpManagerIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by hzCpSnmpManagerAddress. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSnmpManagersDepEntry 2 }
|
|
|
|
hzCpSnmpManagerCommunityNameDep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The community string name used by the manager."
|
|
::= { hzCpSnmpManagersDepEntry 3 }
|
|
|
|
hzCpSnmpManagerActivatedDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Specifies whether a specific manager is allowed to access the system. This object is deprecated by hzCpSnmpManagersActivated. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSnmpManagersDepEntry 4 }
|
|
|
|
hzCpSnmpV3ManagersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpV3ManagersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing snmp V3 manager entries"
|
|
::= { hzCpSnmp 5 }
|
|
|
|
hzCpSnmpV3ManagersEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpV3ManagersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the snmp v3 manager information"
|
|
INDEX { hzCpSnmpV3ManagersIndex }
|
|
::= { hzCpSnmpV3ManagersTable 1 }
|
|
|
|
HzCpSnmpV3ManagersEntry ::= SEQUENCE {
|
|
hzCpSnmpV3ManagersIndex
|
|
Integer32,
|
|
hzCpSnmpV3ManagerUserName
|
|
DisplayString,
|
|
hzCpSnmpV3ManagerAuthProtocol
|
|
INTEGER,
|
|
hzCpSnmpV3ManagerAuthPassword
|
|
DisplayString,
|
|
hzCpSnmpV3ManagerPrivProtocol
|
|
INTEGER,
|
|
hzCpSnmpV3ManagerPrivPassword
|
|
DisplayString,
|
|
hzCpSnmpV3ManagerActivated
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpV3ManagersIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each v3 manager."
|
|
::= { hzCpSnmpV3ManagersEntry 1 }
|
|
|
|
hzCpSnmpV3ManagerUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name of the v3 Manager."
|
|
::= { hzCpSnmpV3ManagersEntry 2 }
|
|
|
|
hzCpSnmpV3ManagerAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuth (1),
|
|
md5 (2),
|
|
sha (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication alogorithm used by the v3 manager."
|
|
::= { hzCpSnmpV3ManagersEntry 3 }
|
|
|
|
hzCpSnmpV3ManagerAuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication password of the v3 Manager."
|
|
::= { hzCpSnmpV3ManagersEntry 4 }
|
|
|
|
hzCpSnmpV3ManagerPrivProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPriv (1),
|
|
des (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privacy encryption alogorithm used by the v3 manager."
|
|
::= { hzCpSnmpV3ManagersEntry 5 }
|
|
|
|
hzCpSnmpV3ManagerPrivPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privacy password of the v3 Manager."
|
|
::= { hzCpSnmpV3ManagersEntry 6 }
|
|
|
|
hzCpSnmpV3ManagerActivated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether a specific v3 manager is allowed to access the system"
|
|
::= { hzCpSnmpV3ManagersEntry 7 }
|
|
|
|
hzCpSnmpAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
v1 (2),
|
|
v2c (3),
|
|
v3 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the running SNMP version on the system."
|
|
::= { hzCpSnmp 6 }
|
|
|
|
hzCpSnmpManagersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpManagersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing snmp manager entries"
|
|
::= { hzCpSnmp 7 }
|
|
|
|
hzCpSnmpManagersEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpManagersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the snmp manager information"
|
|
INDEX { hzCpSnmpManagersIndex }
|
|
::= { hzCpSnmpManagersTable 1 }
|
|
|
|
HzCpSnmpManagersEntry ::= SEQUENCE {
|
|
hzCpSnmpManagersIndex
|
|
Integer32,
|
|
hzCpSnmpManagerDomain
|
|
InetAddressType,
|
|
hzCpSnmpManagerAddress
|
|
InetAddress,
|
|
hzCpSnmpManagerCommunityName
|
|
DisplayString,
|
|
hzCpSnmpManagersPrefixLength
|
|
InetAddressPrefixLength,
|
|
hzCpSnmpManagerActivated
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpManagersIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each manager."
|
|
::= { hzCpSnmpManagersEntry 1 }
|
|
|
|
hzCpSnmpManagerDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates snmp manager inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpSnmpManagersEntry 2 }
|
|
|
|
hzCpSnmpManagerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates snmp manager inet address octet string. "
|
|
::= { hzCpSnmpManagersEntry 3 }
|
|
|
|
hzCpSnmpManagerCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community string name used by the manager."
|
|
::= { hzCpSnmpManagersEntry 4 }
|
|
|
|
hzCpSnmpManagersPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ip Address prefix length. The valid range for IPV4 Address is 1-32 and for IPV6 is 1-128."
|
|
::= { hzCpSnmpManagersEntry 5 }
|
|
|
|
hzCpSnmpManagerActivated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether a specific manager is allowed to access the system. This object deprecates hzCpSnmpManagerActivatedDep."
|
|
::= { hzCpSnmpManagersEntry 32 }
|
|
|
|
--
|
|
-- TRAP INFORMATION HOSTS, ENABLE/DISABLE
|
|
--
|
|
|
|
hzCpSnmpTrapHostDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpTrapHostDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table containing SNMP trap host entries."
|
|
::= { hzCpTrapConfig 1 }
|
|
|
|
hzCpSnmpTrapHostDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpTrapHostDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The snmp trap host entry containing all the trap host information"
|
|
INDEX { hzCpSnmpTrapHostIndexDep }
|
|
::= { hzCpSnmpTrapHostDepTable 1 }
|
|
|
|
HzCpSnmpTrapHostDepEntry ::= SEQUENCE {
|
|
hzCpSnmpTrapHostIndexDep
|
|
Integer32,
|
|
hzCpSnmpTrapHostIpAddressDep
|
|
IpAddress,
|
|
hzCpSnmpTrapHostCommunityNameDep
|
|
DisplayString,
|
|
hzCpSnmpTrapHostActivatedDep
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpTrapHostIndexDep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A unique value for each trap host. "
|
|
::= { hzCpSnmpTrapHostDepEntry 1 }
|
|
|
|
hzCpSnmpTrapHostIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSnmpTrapHostDepEntry 2 }
|
|
|
|
hzCpSnmpTrapHostCommunityNameDep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The community string name used in Traps."
|
|
::= { hzCpSnmpTrapHostDepEntry 3 }
|
|
|
|
hzCpSnmpTrapHostActivatedDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by hzCpSnmpTrapHostActivated. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSnmpTrapHostDepEntry 4 }
|
|
|
|
--
|
|
-- SNMP V3 TRAP HOST TABLE
|
|
--
|
|
|
|
hzCpSnmpV3TrapHostsDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpV3TrapHostsDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table containing snmp V3 trap host entries"
|
|
::= { hzCpTrapConfig 2 }
|
|
|
|
hzCpSnmpV3TrapHostsDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpV3TrapHostsDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Contains the snmp v3 trap host information"
|
|
INDEX { hzCpSnmpV3TrapHostsIndexDep }
|
|
::= { hzCpSnmpV3TrapHostsDepTable 1 }
|
|
|
|
HzCpSnmpV3TrapHostsDepEntry ::= SEQUENCE {
|
|
hzCpSnmpV3TrapHostsIndexDep
|
|
Integer32,
|
|
hzCpSnmpV3TrapHostIpAddressDep
|
|
IpAddress,
|
|
hzCpSnmpV3TrapHostUserNameDep
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostAuthProtocolDep
|
|
INTEGER,
|
|
hzCpSnmpV3TrapHostAuthPasswordDep
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostPrivProtocolDep
|
|
INTEGER,
|
|
hzCpSnmpV3TrapHostPrivPasswordDep
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostActivatedDep
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpV3TrapHostsIndexDep OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A unique value for each v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 1 }
|
|
|
|
hzCpSnmpV3TrapHostIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 2 }
|
|
|
|
hzCpSnmpV3TrapHostUserNameDep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The user name of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 3 }
|
|
|
|
hzCpSnmpV3TrapHostAuthProtocolDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuth (1),
|
|
md5 (2),
|
|
sha (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The authentication alogorithm used by the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 4 }
|
|
|
|
hzCpSnmpV3TrapHostAuthPasswordDep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The authentication password of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 5 }
|
|
|
|
hzCpSnmpV3TrapHostPrivProtocolDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPriv (1),
|
|
des (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The privacy encryption alogorithm used by the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 6 }
|
|
|
|
hzCpSnmpV3TrapHostPrivPasswordDep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The privacy password of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 7 }
|
|
|
|
hzCpSnmpV3TrapHostActivatedDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Specifies whether a specific v3 trap host is allowed to access the system"
|
|
::= { hzCpSnmpV3TrapHostsDepEntry 8 }
|
|
|
|
hzCpColdStartTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 1 }
|
|
|
|
hzCpLinkDownTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 2 }
|
|
|
|
hzCpPeerAuthenticationFailureTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 3 }
|
|
|
|
hzCpHitlessAamConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 4 }
|
|
|
|
hzCpHitlessAamModulationLoweredTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 5 }
|
|
|
|
hzCpHitlessAamModulationChangedEventTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
::= { hzCpTrapEnable 6 }
|
|
|
|
hzCpAtpcConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 7 }
|
|
|
|
hzCpAtpcAutoDisabledTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 8 }
|
|
|
|
hzCpNoSntpServersReachableTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 9 }
|
|
|
|
hzCpFrequencyFileInvalidTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 10 }
|
|
|
|
hzCpAggregateDroppedFramesThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 11 }
|
|
|
|
hzCpQueueDroppedFramesThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 12 }
|
|
|
|
hzCpBwUtilizationThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 13 }
|
|
|
|
hzCpQueueDepthThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 14 }
|
|
|
|
hzCpRlsConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 15 }
|
|
|
|
hzCpRlsShutdownActivatedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 16 }
|
|
|
|
hzCpRlsQueueBasedShutdownActivatedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 17 }
|
|
|
|
hzCpModemRxLossOfSignalLockTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 18 }
|
|
|
|
hzCpModemSnrBelowThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 19 }
|
|
|
|
hzCpModemEqualizerStressThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 20 }
|
|
|
|
hzCpRslBelowThresholdTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 21 }
|
|
|
|
hzCpRadioSynthLostLockTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 22 }
|
|
|
|
hzCpRadioCalTableNotAvailableTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 23 }
|
|
|
|
hzCpRadioDrainCurrentOutOfLimitTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 24 }
|
|
|
|
hzCpRadioPowerAmplifierTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 25 }
|
|
|
|
hzCpTemperatureOutOfLimitTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 26 }
|
|
|
|
hzCpRedundancyConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 27 }
|
|
|
|
hzCpRedundancyActiveOnSecondaryTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 28 }
|
|
|
|
hzCpRedundancyOperatingInForcedSwitchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 29 }
|
|
|
|
hzCpRedundancyEnetCrossLinkTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 30 }
|
|
|
|
hzCpRedundancyActiveUsingPartnerWLinkTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 31 }
|
|
|
|
hzCpRedundancyStandbyWLinkInUseTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 32 }
|
|
|
|
hzCpRedundancyStandbyOnPrimaryTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 33 }
|
|
|
|
hzCpX2DeliveringHalfCapacityTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 34 }
|
|
|
|
hzCpBncCableSignalNotDetectedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 35 }
|
|
|
|
hzCpEthernetSpeedReducedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 36 }
|
|
|
|
hzCpSynceLostLockTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
::= { hzCpTrapEnable 37 }
|
|
|
|
hzCpSynceSecondarySourceInUseTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
::= { hzCpTrapEnable 38 }
|
|
|
|
hzCpUserSessionTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not. "
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 39 }
|
|
|
|
hzCpInvalidSystemConfigTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 40 }
|
|
|
|
hzCpMibChangeNotSavedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 41 }
|
|
|
|
hzCpTransmitterLossOfSyncTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 42 }
|
|
|
|
hzCpRadioLinearityCalErrorTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
::= { hzCpTrapEnable 43 }
|
|
|
|
hzCpSynceConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 44 }
|
|
|
|
hzCpCryptoPowerUpTestsFailedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { enabled }
|
|
::= { hzCpTrapEnable 45 }
|
|
|
|
hzCpCryptoConfigMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
DEFVAL { disabled }
|
|
::= { hzCpTrapEnable 46 }
|
|
|
|
hzCpSystemTimeChangeTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not"
|
|
::= { hzCpTrapEnable 47 }
|
|
|
|
hzCpCodeCheckTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not."
|
|
::= { hzCpTrapEnable 48 }
|
|
|
|
hzCpConfigChangedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this trap is to be sent or not."
|
|
::= { hzCpTrapEnable 49 }
|
|
|
|
hzCpSnmpTrapHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpTrapHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing SNMP trap host entries."
|
|
::= { hzCpTrapConfig 4 }
|
|
|
|
hzCpSnmpTrapHostEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpTrapHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snmp trap host entry containing all the trap host information"
|
|
INDEX { hzCpSnmpTrapHostIndex }
|
|
::= { hzCpSnmpTrapHostTable 1 }
|
|
|
|
HzCpSnmpTrapHostEntry ::= SEQUENCE {
|
|
hzCpSnmpTrapHostIndex
|
|
Integer32,
|
|
hzCpSnmpTrapHostDomain
|
|
InetAddressType,
|
|
hzCpSnmpTrapHostAddress
|
|
InetAddress,
|
|
hzCpSnmpTrapHostCommunityName
|
|
DisplayString,
|
|
hzCpSnmpTrapHostActivated
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpTrapHostIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each trap host. "
|
|
::= { hzCpSnmpTrapHostEntry 1 }
|
|
|
|
hzCpSnmpTrapHostDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates snmp trap host inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpSnmpTrapHostEntry 2 }
|
|
|
|
hzCpSnmpTrapHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates snmp trap host inet address octet string. This object deprecates hzCpSnmpTrapHostIpAddressDep."
|
|
::= { hzCpSnmpTrapHostEntry 3 }
|
|
|
|
hzCpSnmpTrapHostCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community string name used in Traps."
|
|
::= { hzCpSnmpTrapHostEntry 4 }
|
|
|
|
hzCpSnmpTrapHostActivated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether traps are to be sent to this specific host or not. This object deprecates hzCpSnmpTrapHostActivatedDep."
|
|
::= { hzCpSnmpTrapHostEntry 32 }
|
|
|
|
--
|
|
-- SNMP V3 TRAP HOST TABLE
|
|
--
|
|
|
|
hzCpSnmpV3TrapHostsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSnmpV3TrapHostsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing snmp V3 trap host entries"
|
|
::= { hzCpTrapConfig 5 }
|
|
|
|
hzCpSnmpV3TrapHostsEntry OBJECT-TYPE
|
|
SYNTAX HzCpSnmpV3TrapHostsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the snmp v3 trap host information"
|
|
INDEX { hzCpSnmpV3TrapHostsIndex }
|
|
::= { hzCpSnmpV3TrapHostsTable 1 }
|
|
|
|
HzCpSnmpV3TrapHostsEntry ::= SEQUENCE {
|
|
hzCpSnmpV3TrapHostsIndex
|
|
Integer32,
|
|
hzCpSnmpV3TrapHostDomain
|
|
InetAddressType,
|
|
hzCpSnmpV3TrapHostAddress
|
|
InetAddress,
|
|
hzCpSnmpV3TrapHostUserName
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostAuthProtocol
|
|
INTEGER,
|
|
hzCpSnmpV3TrapHostAuthPassword
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostPrivProtocol
|
|
INTEGER,
|
|
hzCpSnmpV3TrapHostPrivPassword
|
|
DisplayString,
|
|
hzCpSnmpV3TrapHostActivated
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSnmpV3TrapHostsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 1 }
|
|
|
|
hzCpSnmpV3TrapHostDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates v3 trap host inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpSnmpV3TrapHostsEntry 2 }
|
|
|
|
hzCpSnmpV3TrapHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates snmp v3 trap host inet address octet string. This object deprecates hzCpSnmpV3TrapHostIpAddressDep."
|
|
::= { hzCpSnmpV3TrapHostsEntry 3 }
|
|
|
|
hzCpSnmpV3TrapHostUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 4 }
|
|
|
|
hzCpSnmpV3TrapHostAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuth (1),
|
|
md5 (2),
|
|
sha (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication alogorithm used by the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 5 }
|
|
|
|
hzCpSnmpV3TrapHostAuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication password of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 6 }
|
|
|
|
hzCpSnmpV3TrapHostPrivProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPriv (1),
|
|
des (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privacy encryption alogorithm used by the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 7 }
|
|
|
|
hzCpSnmpV3TrapHostPrivPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privacy password of the v3 trap host."
|
|
::= { hzCpSnmpV3TrapHostsEntry 8 }
|
|
|
|
hzCpSnmpV3TrapHostActivated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether v3 traps are to be sent to this specific host or not. This object deprecates hzCpSnmpV3TrapHostActivatedDep."
|
|
::= { hzCpSnmpV3TrapHostsEntry 32 }
|
|
|
|
--
|
|
-- hzCpRadius
|
|
--
|
|
|
|
hzCpRadiusSuperUserAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If strict mode is off, the super user can login when radius is turned off or unreachable."
|
|
DEFVAL { off }
|
|
::= { hzCpRadius 1 }
|
|
|
|
hzCpRadiusServerTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Timeout period for authentication requests"
|
|
::= { hzCpRadius 2 }
|
|
|
|
hzCpRadiusServerDeadTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Time to declare an unresponsive server 'dead'"
|
|
::= { hzCpRadius 3 }
|
|
|
|
hzCpRadiusServerReTransmit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of retransmits to an unresponsive server"
|
|
::= { hzCpRadius 4 }
|
|
|
|
hzCpRadiusServerDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRadiusServerDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table containing radius server entries"
|
|
::= { hzCpRadius 5 }
|
|
|
|
hzCpRadiusServerDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpRadiusServerDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Contains the SNTP server information"
|
|
INDEX { hzCpRadiusServerIndexDep }
|
|
::= { hzCpRadiusServerDepTable 1 }
|
|
|
|
HzCpRadiusServerDepEntry ::= SEQUENCE {
|
|
hzCpRadiusServerIndexDep
|
|
Integer32,
|
|
hzCpRadiusCfgdHostIpAddressDep
|
|
IpAddress,
|
|
hzCpRadiusCfgdHostKeyDep
|
|
DisplayString
|
|
}
|
|
|
|
hzCpRadiusServerIndexDep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A unique value for each radius server."
|
|
::= { hzCpRadiusServerDepEntry 1 }
|
|
|
|
hzCpRadiusCfgdHostIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the configured radius server. This object is deprecated by hzCpRadiusCfgdHostAddress. The value is 0.0.0.0 if not available or not applicable.
|
|
"
|
|
::= { hzCpRadiusServerDepEntry 2 }
|
|
|
|
hzCpRadiusCfgdHostKeyDep OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The key of the configured radius server."
|
|
::= { hzCpRadiusServerDepEntry 3 }
|
|
|
|
hzCpRadiusServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing radius server entries"
|
|
::= { hzCpRadius 6 }
|
|
|
|
hzCpRadiusServerEntry OBJECT-TYPE
|
|
SYNTAX HzCpRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the SNTP server information"
|
|
INDEX { hzCpRadiusServerIndex }
|
|
::= { hzCpRadiusServerTable 1 }
|
|
|
|
HzCpRadiusServerEntry ::= SEQUENCE {
|
|
hzCpRadiusServerIndex
|
|
Integer32,
|
|
hzCpRadiusCfgdHostDomain
|
|
InetAddressType,
|
|
hzCpRadiusCfgdHostAddress
|
|
InetAddress,
|
|
hzCpRadiusCfgdHostKey
|
|
DisplayString
|
|
}
|
|
|
|
hzCpRadiusServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each radius server."
|
|
::= { hzCpRadiusServerEntry 1 }
|
|
|
|
hzCpRadiusCfgdHostDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates configured radius radius inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpRadiusServerEntry 2 }
|
|
|
|
hzCpRadiusCfgdHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates configured radius server inet address octet string. This object deprecates hzCpRadiusCfgdHostIpAddressDep."
|
|
::= { hzCpRadiusServerEntry 3 }
|
|
|
|
hzCpRadiusCfgdHostKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key of the configured radius server."
|
|
::= { hzCpRadiusServerEntry 4 }
|
|
|
|
-- ------------------------------
|
|
-- hzCpManagementSessions
|
|
-- ------------------------------
|
|
|
|
hzCpUserSessionUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpUserSessionUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of user sessions"
|
|
::= { hzCpManagementSessions 1 }
|
|
|
|
hzCpUserSessionUserEntry OBJECT-TYPE
|
|
SYNTAX HzCpUserSessionUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User session entry"
|
|
INDEX { hzCpUserSessionUserIndex }
|
|
::= { hzCpUserSessionUserTable 1 }
|
|
|
|
HzCpUserSessionUserEntry ::= SEQUENCE {
|
|
hzCpUserSessionUserIndex
|
|
INTEGER,
|
|
hzCpUserSessionUserName
|
|
DisplayString,
|
|
hzCpUserSessionUserConnectionType
|
|
DisplayString,
|
|
hzCpUserSessionUserState
|
|
INTEGER
|
|
}
|
|
|
|
hzCpUserSessionUserIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
user1 (1),
|
|
user2 (2),
|
|
user3 (3),
|
|
user4 (4),
|
|
user5 (5),
|
|
user6 (6),
|
|
user7 (7),
|
|
user8 (8),
|
|
user9 (9),
|
|
user10 (10),
|
|
user11 (11),
|
|
user12 (12),
|
|
user13 (13),
|
|
user14 (14),
|
|
user15 (15),
|
|
user16 (16),
|
|
user17 (17),
|
|
user18 (18),
|
|
user19 (19),
|
|
user20 (20)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each user."
|
|
::= { hzCpUserSessionUserEntry 1 }
|
|
|
|
hzCpUserSessionUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress."
|
|
::= { hzCpUserSessionUserEntry 2 }
|
|
|
|
hzCpUserSessionUserConnectionType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment."
|
|
::= { hzCpUserSessionUserEntry 3 }
|
|
|
|
hzCpUserSessionUserState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
informationNotAvailable (1),
|
|
sessionTerminated (2),
|
|
sessionInProgress (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system."
|
|
::= { hzCpUserSessionUserEntry 4 }
|
|
|
|
--
|
|
-- HTTPS group
|
|
--
|
|
|
|
hzCpHttpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether HTTP is enabled."
|
|
DEFVAL { disabled }
|
|
::= { hzCpHttp 1 }
|
|
|
|
hzCpHttpSecureCertificateStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the HTTPS certificate status"
|
|
::= { hzCpHttpSecure 1 }
|
|
|
|
hzCpHttpSecureAccessForAdminUsers OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the HTTPS access requirement for Admin user group."
|
|
::= { hzCpHttpSecure 2 }
|
|
|
|
hzCpHttpSecureAccessForNocUsers OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the HTTPS access requirement for Noc user group."
|
|
::= { hzCpHttpSecure 3 }
|
|
|
|
hzCpHttpSecureAccessForSuperUsers OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the HTTPS access requirement for Super user group."
|
|
::= { hzCpHttpSecure 4 }
|
|
|
|
hzCpEnetPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for enet port configuration"
|
|
::= { hzCpEnetPort 1 }
|
|
|
|
hzCpEnetPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for enet port configuration"
|
|
INDEX { hzCpEnetPortIndex }
|
|
::= { hzCpEnetPortConfigTable 1 }
|
|
|
|
HzCpEnetPortConfigEntry ::= SEQUENCE {
|
|
hzCpEnetPortIndex
|
|
INTEGER,
|
|
hzCpEnetPortName
|
|
DisplayString,
|
|
hzCpEnetPortAutoNegotiation
|
|
INTEGER,
|
|
hzCpEnetPortSpeed
|
|
INTEGER,
|
|
hzCpEnetPortDuplex
|
|
INTEGER,
|
|
hzCpEnetPortMedia
|
|
INTEGER,
|
|
hzCpEnetPortAdminState
|
|
INTEGER,
|
|
hzCpEnetPortPauseFrame
|
|
INTEGER,
|
|
hzCpEnetPortMaxFrameSize
|
|
Integer32,
|
|
hzCpEnetPortOpticalTransceiverState
|
|
INTEGER,
|
|
hzCpEnetPortState
|
|
INTEGER,
|
|
hzCpEnetPayloadState
|
|
INTEGER
|
|
}
|
|
|
|
hzCpEnetPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each enet port."
|
|
::= { hzCpEnetPortConfigEntry 1 }
|
|
|
|
--
|
|
-- PORT CONFIG
|
|
--
|
|
|
|
hzCpEnetPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the port interface name"
|
|
::= { hzCpEnetPortConfigEntry 2 }
|
|
|
|
hzCpEnetPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex. "
|
|
::= { hzCpEnetPortConfigEntry 3 }
|
|
|
|
hzCpEnetPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x10M (1),
|
|
x100M (2),
|
|
x1000M (3),
|
|
auto (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port interface speed ."
|
|
::= { hzCpEnetPortConfigEntry 4 }
|
|
|
|
hzCpEnetPortDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full (1),
|
|
half (2),
|
|
auto (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port interface duplex."
|
|
::= { hzCpEnetPortConfigEntry 5 }
|
|
|
|
hzCpEnetPortMedia OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
copper (1),
|
|
fiber (2),
|
|
auto (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port interface media type."
|
|
::= { hzCpEnetPortConfigEntry 6 }
|
|
|
|
hzCpEnetPortAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the admin status of the port."
|
|
::= { hzCpEnetPortConfigEntry 7 }
|
|
|
|
hzCpEnetPortPauseFrame OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network.
|
|
When PAUSE is not enabled, no pause frames will be generated by the system. "
|
|
DEFVAL { off }
|
|
::= { hzCpEnetPortConfigEntry 8 }
|
|
|
|
hzCpEnetPortMaxFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1600..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For port the default maximum frame size is 1600 bytes. The settable
|
|
maximum frame size must be a multiple of 128. If the chosen
|
|
maximum frame size is not a multiple of 128, its closest
|
|
number which is a multiple of 128 is actually used. The
|
|
settable lowest maximum frame size is 1664, and the settable
|
|
highest maximum frame size is 9600. If the chosen maximum
|
|
frame size is out of this range, the default maximum frame
|
|
size of 1600 is used. "
|
|
DEFVAL { 1600 }
|
|
::= { hzCpEnetPortConfigEntry 9 }
|
|
|
|
hzCpEnetPortOpticalTransceiverState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When it is on, optical transmitter for port1 is enabled. Otherwise
|
|
optical transmitter is disabled. This option is valid for port1 only if media type is configured as fiber."
|
|
DEFVAL { off }
|
|
::= { hzCpEnetPortConfigEntry 10 }
|
|
|
|
hzCpEnetPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables enet-port3 or enet-port4."
|
|
::= { hzCpEnetPortConfigEntry 11 }
|
|
|
|
hzCpEnetPayloadState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables payload on a specific port. If payload state is disabled for that port, it's considered as purely management."
|
|
::= { hzCpEnetPortConfigEntry 12 }
|
|
|
|
hzCpEnetPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for enet port status"
|
|
::= { hzCpEnetPort 2 }
|
|
|
|
hzCpEnetPortStatusEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for enet port status"
|
|
INDEX { hzCpEnetPortStatusIndex }
|
|
::= { hzCpEnetPortStatusTable 1 }
|
|
|
|
HzCpEnetPortStatusEntry ::= SEQUENCE {
|
|
hzCpEnetPortStatusIndex
|
|
INTEGER,
|
|
hzCpEnetPortLinkStatus
|
|
INTEGER,
|
|
hzCpEnetPortAutoNegotiationStatus
|
|
INTEGER,
|
|
hzCpEnetPortSpeedStatus
|
|
INTEGER,
|
|
hzCpEnetPortDuplexStatus
|
|
INTEGER,
|
|
hzCpEnetPortMediaStatus
|
|
INTEGER
|
|
}
|
|
|
|
hzCpEnetPortStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each enet port."
|
|
::= { hzCpEnetPortStatusEntry 1 }
|
|
|
|
--
|
|
-- PORT STATUS
|
|
--
|
|
|
|
hzCpEnetPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
up (2),
|
|
invalid (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port link status."
|
|
::= { hzCpEnetPortStatusEntry 2 }
|
|
|
|
hzCpEnetPortAutoNegotiationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2),
|
|
invalid (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port AutoNegotiation status."
|
|
::= { hzCpEnetPortStatusEntry 3 }
|
|
|
|
hzCpEnetPortSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x10M (1),
|
|
x100M (2),
|
|
x1000M (3),
|
|
auto (4),
|
|
invalid (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port interface speed status."
|
|
::= { hzCpEnetPortStatusEntry 4 }
|
|
|
|
hzCpEnetPortDuplexStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full (1),
|
|
half (2),
|
|
auto (3),
|
|
invalid (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port interface duplex status."
|
|
::= { hzCpEnetPortStatusEntry 5 }
|
|
|
|
hzCpEnetPortMediaStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
copper (1),
|
|
fiber (2),
|
|
auto (3),
|
|
invalid (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port interface media status."
|
|
::= { hzCpEnetPortStatusEntry 6 }
|
|
|
|
hzCpEnetPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for enet port stats"
|
|
::= { hzCpEnetPort 3 }
|
|
|
|
hzCpEnetPortStatsEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for enet port stats"
|
|
INDEX { hzCpEnetPortStatsIndex }
|
|
::= { hzCpEnetPortStatsTable 1 }
|
|
|
|
HzCpEnetPortStatsEntry ::= SEQUENCE {
|
|
hzCpEnetPortStatsIndex
|
|
INTEGER,
|
|
hzCpEnetPortTxFrames
|
|
Counter64,
|
|
hzCpEnetPortTxBytes
|
|
Counter64,
|
|
hzCpEnetPortRxFramesOk
|
|
Counter64,
|
|
hzCpEnetPortRxBytesOk
|
|
Counter64,
|
|
hzCpEnetPortRxFramesLengthErrors
|
|
Counter64,
|
|
hzCpEnetPortRxFramesCrcErrors
|
|
Counter64,
|
|
hzCpEnetPortRxDiscarded
|
|
Counter64
|
|
}
|
|
|
|
hzCpEnetPortStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each enet port."
|
|
::= { hzCpEnetPortStatsEntry 1 }
|
|
|
|
hzCpEnetPortTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a
|
|
subnetwork-unicast address, including those that
|
|
were discarded or not sent."
|
|
::= { hzCpEnetPortStatsEntry 2 }
|
|
|
|
hzCpEnetPortTxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a non-
|
|
unicast (i.e., a subnetwork-broadcast or
|
|
subnetwork-multicast) address, including those
|
|
that were discarded or not sent."
|
|
::= { hzCpEnetPortStatsEntry 3 }
|
|
|
|
hzCpEnetPortRxFramesOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes received on the interface, including framing characters."
|
|
::= { hzCpEnetPortStatsEntry 4 }
|
|
|
|
hzCpEnetPortRxBytesOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up buffer space."
|
|
::= { hzCpEnetPortStatsEntry 5 }
|
|
|
|
hzCpEnetPortRxFramesLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of inbound packets that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { hzCpEnetPortStatsEntry 6 }
|
|
|
|
hzCpEnetPortRxFramesCrcErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets received via the interface
|
|
which were discarded because of rx frames CRC errors."
|
|
::= { hzCpEnetPortStatsEntry 7 }
|
|
|
|
hzCpEnetPortRxDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up buffer space."
|
|
::= { hzCpEnetPortStatsEntry 8 }
|
|
|
|
hzCpEnetAggTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated port egress frames."
|
|
::= { hzCpEnetAggregatedStats 1 }
|
|
|
|
hzCpEnetAggTxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated port egress bytes."
|
|
::= { hzCpEnetAggregatedStats 2 }
|
|
|
|
hzCpEnetAggRxFramesOK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated port ingress frames."
|
|
::= { hzCpEnetAggregatedStats 3 }
|
|
|
|
hzCpEnetAggRxBytesOK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated port ingress bytes."
|
|
::= { hzCpEnetAggregatedStats 4 }
|
|
|
|
hzCpEnetAggRxFramesLengthError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated frames received that were discarded due to length error."
|
|
::= { hzCpEnetAggregatedStats 5 }
|
|
|
|
hzCpEnetAggPortRxFramesCrcError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated frames received that were discarded due to CRC error. "
|
|
::= { hzCpEnetAggregatedStats 6 }
|
|
|
|
hzCpEnetAggPortRxFramesDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of aggregated frames received that were discarded due to an error. "
|
|
::= { hzCpEnetAggregatedStats 7 }
|
|
|
|
hzCpEnetAggBWUtilization OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The carried load over link capacity for port."
|
|
::= { hzCpEnetAggregatedStats 8 }
|
|
|
|
hzCpEnetAggIngressDataRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data rate coming into the ethernet for port.
|
|
The data rate you see is multiplied by 100. e.g. A display
|
|
of 1530 is actually 15.30 Mpbs"
|
|
::= { hzCpEnetAggregatedStats 9 }
|
|
|
|
hzCpEnetAggEgressDataRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data rate going out of the ethernet for port.
|
|
The data rate you see is multiplied by 100. e.g. A display
|
|
of 1530 is actually 15.30 Mpbs."
|
|
::= { hzCpEnetAggregatedStats 10 }
|
|
|
|
hzCpEnetAggFramesInQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetAggFramesInQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of enet aggregate frames."
|
|
::= { hzCpEnetAggregatedStats 11 }
|
|
|
|
hzCpEnetAggFramesInQueueEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetAggFramesInQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of enet aggregate frames."
|
|
INDEX { hzCpEnetAggFramesInQueueIndex }
|
|
::= { hzCpEnetAggFramesInQueueTable 1 }
|
|
|
|
HzCpEnetAggFramesInQueueEntry ::= SEQUENCE {
|
|
hzCpEnetAggFramesInQueueIndex
|
|
INTEGER,
|
|
hzCpEnetAggFramesInQueue
|
|
Counter64,
|
|
hzCpEnetAggFramesInQueueDiscarded
|
|
Counter64
|
|
}
|
|
|
|
hzCpEnetAggFramesInQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each of the 8 queues."
|
|
::= { hzCpEnetAggFramesInQueueEntry 1 }
|
|
|
|
hzCpEnetAggFramesInQueue OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of frames in queues."
|
|
::= { hzCpEnetAggFramesInQueueEntry 2 }
|
|
|
|
hzCpEnetAggFramesInQueueDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of frames received in queues that were discarded due to an error.
|
|
One possible reason is lack of buffer space."
|
|
::= { hzCpEnetAggFramesInQueueEntry 3 }
|
|
|
|
hzCpEnetPortLcStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetPortLcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for enet port stats"
|
|
::= { hzCpEnetPort 5 }
|
|
|
|
hzCpEnetPortLcStatsEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetPortLcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for enet port stats"
|
|
INDEX { hzCpEnetPortLcStatsIndex }
|
|
::= { hzCpEnetPortLcStatsTable 1 }
|
|
|
|
HzCpEnetPortLcStatsEntry ::= SEQUENCE {
|
|
hzCpEnetPortLcStatsIndex
|
|
INTEGER,
|
|
hzCpEnetPortLcTxFrames
|
|
Counter32,
|
|
hzCpEnetPortLcTxBytes
|
|
Counter32,
|
|
hzCpEnetPortLcRxFramesOk
|
|
Counter32,
|
|
hzCpEnetPortLcRxBytesOk
|
|
Counter32,
|
|
hzCpEnetPortLcRxFramesLengthErrors
|
|
Counter32,
|
|
hzCpEnetPortLcRxFramesCrcErrors
|
|
Counter32,
|
|
hzCpEnetPortLcRxDiscarded
|
|
Counter32
|
|
}
|
|
|
|
hzCpEnetPortLcStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each enet port."
|
|
::= { hzCpEnetPortLcStatsEntry 1 }
|
|
|
|
hzCpEnetPortLcTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing total number of packets that higher-level
|
|
protocols requested be transmitted to a
|
|
subnetwork-unicast address, including those that
|
|
were discarded or not sent."
|
|
::= { hzCpEnetPortLcStatsEntry 2 }
|
|
|
|
hzCpEnetPortLcTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing total number of packets that higher-level
|
|
protocols requested be transmitted to a non-
|
|
unicast (i.e., a subnetwork-broadcast or
|
|
subnetwork-multicast) address, including those
|
|
that were discarded or not sent."
|
|
::= { hzCpEnetPortLcStatsEntry 3 }
|
|
|
|
hzCpEnetPortLcRxFramesOk OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing total number of bytes received on the interface, including framing characters."
|
|
::= { hzCpEnetPortLcStatsEntry 4 }
|
|
|
|
hzCpEnetPortLcRxBytesOk OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up buffer space."
|
|
::= { hzCpEnetPortLcStatsEntry 5 }
|
|
|
|
hzCpEnetPortLcRxFramesLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the number of inbound packets that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { hzCpEnetPortLcStatsEntry 6 }
|
|
|
|
hzCpEnetPortLcRxFramesCrcErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the number of packets received via the interface
|
|
which were discarded because of rx frames CRC errors."
|
|
::= { hzCpEnetPortLcStatsEntry 7 }
|
|
|
|
hzCpEnetPortLcRxDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up buffer space."
|
|
::= { hzCpEnetPortLcStatsEntry 8 }
|
|
|
|
hzCpEnetAggLcTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated port egress frames."
|
|
::= { hzCpEnetAggregatedLcStats 1 }
|
|
|
|
hzCpEnetAggLcTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated port egress bytes."
|
|
::= { hzCpEnetAggregatedLcStats 2 }
|
|
|
|
hzCpEnetAggLcRxFramesOK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated port ingress frames."
|
|
::= { hzCpEnetAggregatedLcStats 3 }
|
|
|
|
hzCpEnetAggLcRxBytesOK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated port ingress bytes."
|
|
::= { hzCpEnetAggregatedLcStats 4 }
|
|
|
|
hzCpEnetAggLcRxFramesLengthError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to length error."
|
|
::= { hzCpEnetAggregatedLcStats 5 }
|
|
|
|
hzCpEnetAggLcRxFramesCrcError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to CRC error."
|
|
::= { hzCpEnetAggregatedLcStats 6 }
|
|
|
|
hzCpEnetAggLcRxFramesDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to an error."
|
|
::= { hzCpEnetAggregatedLcStats 7 }
|
|
|
|
hzCpEnetAggLcBWUtilization OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the carried load over link capacity for port."
|
|
::= { hzCpEnetAggregatedLcStats 8 }
|
|
|
|
hzCpEnetAggLcIngressDataRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the data rate coming into the ethernet for port.
|
|
The data rate you see is multiplied by 100. e.g. A display
|
|
of 1530 is actually 15.30 Mpbs"
|
|
::= { hzCpEnetAggregatedLcStats 9 }
|
|
|
|
hzCpEnetAggLcEgressDataRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the data rate going out of the ethernet for port.
|
|
The data rate you see is multiplied by 100. e.g. A display
|
|
of 1530 is actually 15.30 Mpbs."
|
|
::= { hzCpEnetAggregatedLcStats 10 }
|
|
|
|
hzCpEnetAggLcFramesInQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetAggLcFramesInQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of enet aggregate frames."
|
|
::= { hzCpEnetAggregatedLcStats 11 }
|
|
|
|
hzCpEnetAggLcFramesInQueueEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetAggLcFramesInQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of enet aggregate frames."
|
|
INDEX { hzCpEnetAggLcFramesInQueueIndex }
|
|
::= { hzCpEnetAggLcFramesInQueueTable 1 }
|
|
|
|
HzCpEnetAggLcFramesInQueueEntry ::= SEQUENCE {
|
|
hzCpEnetAggLcFramesInQueueIndex
|
|
INTEGER,
|
|
hzCpEnetAggLcFramesInQueue
|
|
Counter32,
|
|
hzCpEnetAggLcFramesInQueueDiscarded
|
|
Counter32
|
|
}
|
|
|
|
hzCpEnetAggLcFramesInQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each of the 8 queues."
|
|
::= { hzCpEnetAggLcFramesInQueueEntry 1 }
|
|
|
|
hzCpEnetAggLcFramesInQueue OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of frames in queues."
|
|
::= { hzCpEnetAggLcFramesInQueueEntry 2 }
|
|
|
|
hzCpEnetAggLcFramesInQueueDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of frames received in queues that were discarded due to an error.
|
|
One possible reason is lack of buffer space."
|
|
::= { hzCpEnetAggLcFramesInQueueEntry 3 }
|
|
|
|
hzCpEnetPortVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpEnetPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of enet port vlan setting."
|
|
::= { hzCpEnetPort 7 }
|
|
|
|
hzCpEnetPortVlanEntry OBJECT-TYPE
|
|
SYNTAX HzCpEnetPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of enet port vlan setting."
|
|
INDEX { hzCpEnetPortVlanIndex }
|
|
::= { hzCpEnetPortVlanTable 1 }
|
|
|
|
HzCpEnetPortVlanEntry ::= SEQUENCE {
|
|
hzCpEnetPortVlanIndex
|
|
INTEGER,
|
|
hzCpEnetPortDefaultVlanId
|
|
Integer32,
|
|
hzCpEnetPortDefaultVlanPriority
|
|
Integer32
|
|
}
|
|
|
|
hzCpEnetPortVlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name identifying each enet port."
|
|
::= { hzCpEnetPortVlanEntry 1 }
|
|
|
|
hzCpEnetPortDefaultVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates default VLAN Tag Id (1...4095) per port."
|
|
::= { hzCpEnetPortVlanEntry 2 }
|
|
|
|
hzCpEnetPortDefaultVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicated default VLAN tagging priority (0...7) per port."
|
|
::= { hzCpEnetPortVlanEntry 3 }
|
|
|
|
-- -----------------------------
|
|
-- hzCpWirelessInterfaceNames
|
|
-- -----------------------------
|
|
|
|
hzCpWirelessInterfaceNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpWirelessInterfaceNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Modems"
|
|
::= { hzCpWirelessInterfaceNames 1 }
|
|
|
|
hzCpWirelessInterfaceNameEntry OBJECT-TYPE
|
|
SYNTAX HzCpWirelessInterfaceNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Wireless Interface Modem"
|
|
INDEX { hzCpWirelessInterfaceNameIndex }
|
|
::= { hzCpWirelessInterfaceNameTable 1 }
|
|
|
|
HzCpWirelessInterfaceNameEntry ::= SEQUENCE {
|
|
hzCpWirelessInterfaceNameIndex
|
|
INTEGER,
|
|
hzCpWirelessInterfaceName
|
|
DisplayString
|
|
}
|
|
|
|
hzCpWirelessInterfaceNameIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1),
|
|
wireless-port-2 (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each Wireless Interface."
|
|
::= { hzCpWirelessInterfaceNameEntry 1 }
|
|
|
|
hzCpWirelessInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the functionality of the Wireless Interface."
|
|
::= { hzCpWirelessInterfaceNameEntry 2 }
|
|
|
|
-- ----------------
|
|
-- hzCpModemTable
|
|
-- ----------------
|
|
|
|
hzCpModemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Modems"
|
|
::= { hzCpWirelessInterfaceModems 1 }
|
|
|
|
hzCpModemEntry OBJECT-TYPE
|
|
SYNTAX HzCpModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Wireless Interface Modem"
|
|
INDEX { hzCpModemIndex }
|
|
::= { hzCpModemTable 1 }
|
|
|
|
HzCpModemEntry ::= SEQUENCE {
|
|
hzCpModemIndex
|
|
INTEGER,
|
|
hzCpModemOperStatus
|
|
INTEGER,
|
|
hzCpModemChannelizedRSL
|
|
Integer32,
|
|
hzCpModemChannelizedRSLUnsignedInt
|
|
Integer32,
|
|
hzCpModemModulationType
|
|
INTEGER,
|
|
hzCpModemRxSpeed
|
|
Integer32,
|
|
hzCpModemTxSpeed
|
|
Integer32,
|
|
hzCpModemSNR
|
|
Integer32,
|
|
hzCpModemEbToNoiseRatio
|
|
Integer32,
|
|
hzCpModemEqualizerStress
|
|
Integer32
|
|
}
|
|
|
|
hzCpModemIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpModemEntry 1 }
|
|
|
|
hzCpModemOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2),
|
|
testing (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the interface. Testing indicates that no operational packets can be passed."
|
|
::= { hzCpModemEntry 2 }
|
|
|
|
hzCpModemChannelizedRSL OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm"
|
|
::= { hzCpModemEntry 3 }
|
|
|
|
hzCpModemChannelizedRSLUnsignedInt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBm"
|
|
::= { hzCpModemEntry 4 }
|
|
|
|
hzCpModemModulationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk (1),
|
|
qam16 (2),
|
|
qam32 (3),
|
|
qam64 (4),
|
|
qam128 (5),
|
|
qam256 (6),
|
|
qam512 (7),
|
|
qam1024 (8),
|
|
qam2048 (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation type of the modem, distinguished according
|
|
to the physical/link protocol."
|
|
::= { hzCpModemEntry 5 }
|
|
|
|
hzCpModemRxSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimate of the modem's current Rx bandwidth in bits per
|
|
second. Divide the value by 10000 to get the actual data rate in Mbps"
|
|
::= { hzCpModemEntry 6 }
|
|
|
|
hzCpModemTxSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimate of the modem's current Tx bandwidth in bits per
|
|
second. Divide the value by 10000 to get the actual data rate in Mbps"
|
|
::= { hzCpModemEntry 7 }
|
|
|
|
hzCpModemSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR value in dB. Divide the value by 10 to get the actual SNR."
|
|
::= { hzCpModemEntry 8 }
|
|
|
|
hzCpModemEbToNoiseRatio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the modem Estimated Energy per information bit to Noise power spectral density.
|
|
Divide the value by 10 to get the actual EbToNoiseRatio"
|
|
::= { hzCpModemEntry 9 }
|
|
|
|
hzCpModemEqualizerStress OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working."
|
|
::= { hzCpModemEntry 10 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpWirelessInterfaceModems
|
|
-- ----------------------------
|
|
|
|
hzCpWirelessPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpWirelessPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Modem Statistics"
|
|
::= { hzCpWirelessInterfaceModems 2 }
|
|
|
|
hzCpWirelessPortStatsEntry OBJECT-TYPE
|
|
SYNTAX HzCpWirelessPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for a Wireless Interface Modem"
|
|
INDEX { hzCpWirelessPortStatsIndex }
|
|
::= { hzCpWirelessPortStatsTable 1 }
|
|
|
|
HzCpWirelessPortStatsEntry ::= SEQUENCE {
|
|
hzCpWirelessPortStatsIndex
|
|
INTEGER,
|
|
hzCpWirelessPortTxBlocks
|
|
Counter64,
|
|
hzCpWirelessPortRxBlocksOKs
|
|
Counter64,
|
|
hzCpWirelessPortRxBlocksErrors
|
|
Counter64
|
|
}
|
|
|
|
hzCpWirelessPortStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1),
|
|
wireless-port-2 (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode."
|
|
::= { hzCpWirelessPortStatsEntry 1 }
|
|
|
|
hzCpWirelessPortTxBlocks OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Modem blocks transmitted."
|
|
::= { hzCpWirelessPortStatsEntry 2 }
|
|
|
|
hzCpWirelessPortRxBlocksOKs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Modem blocks received."
|
|
::= { hzCpWirelessPortStatsEntry 3 }
|
|
|
|
hzCpWirelessPortRxBlocksErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Modem blocks received in error."
|
|
::= { hzCpWirelessPortStatsEntry 4 }
|
|
|
|
hzCpWirelessAggTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Ethernet Combiner frames sent."
|
|
::= { hzCpWirelessAggregateStats 1 }
|
|
|
|
hzCpWirelessAggRxFramesOK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of good Ethernet Combiner frames received."
|
|
::= { hzCpWirelessAggregateStats 2 }
|
|
|
|
hzCpWirelessAggRxFramesErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Ethernet Combiner frames received in error."
|
|
::= { hzCpWirelessAggregateStats 3 }
|
|
|
|
hzCpWirelessAggRxFramesDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current count of Ethernet Combiner frames in the queue that were discarded."
|
|
::= { hzCpWirelessAggregateStats 4 }
|
|
|
|
hzCpWirelessPortLcStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpWirelessPortLcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Modem Statistics"
|
|
::= { hzCpWirelessInterfaceModems 4 }
|
|
|
|
hzCpWirelessPortLcStatsEntry OBJECT-TYPE
|
|
SYNTAX HzCpWirelessPortLcStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for a Wireless Interface Modem"
|
|
INDEX { hzCpWirelessPortLcStatsIndex }
|
|
::= { hzCpWirelessPortLcStatsTable 1 }
|
|
|
|
HzCpWirelessPortLcStatsEntry ::= SEQUENCE {
|
|
hzCpWirelessPortLcStatsIndex
|
|
INTEGER,
|
|
hzCpWirelessPortLcTxBlocks
|
|
Counter32,
|
|
hzCpWirelessPortLcRxBlocksOKs
|
|
Counter32,
|
|
hzCpWirelessPortLcRxBlocksErrors
|
|
Counter32
|
|
}
|
|
|
|
hzCpWirelessPortLcStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1),
|
|
wireless-port-2 (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode."
|
|
::= { hzCpWirelessPortLcStatsEntry 1 }
|
|
|
|
hzCpWirelessPortLcTxBlocks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Modem blocks transmitted."
|
|
::= { hzCpWirelessPortLcStatsEntry 2 }
|
|
|
|
hzCpWirelessPortLcRxBlocksOKs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Modem blocks received."
|
|
::= { hzCpWirelessPortLcStatsEntry 3 }
|
|
|
|
hzCpWirelessPortLcRxBlocksErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Modem blocks received in error."
|
|
::= { hzCpWirelessPortLcStatsEntry 4 }
|
|
|
|
hzCpWirelessAggLcTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Ethernet Combiner frames sent."
|
|
::= { hzCpWirelessAggregateLcStats 1 }
|
|
|
|
hzCpWirelessAggLcRxFramesOK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of good Ethernet Combiner frames received."
|
|
::= { hzCpWirelessAggregateLcStats 2 }
|
|
|
|
hzCpWirelessAggLcRxFramesErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Ethernet Combiner frames received in error."
|
|
::= { hzCpWirelessAggregateLcStats 3 }
|
|
|
|
hzCpWirelessAggLcRxFramesDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A low capacity 32-bit counter representing the current count of Ethernet Combiner frames in the queue that were discarded."
|
|
::= { hzCpWirelessAggregateLcStats 4 }
|
|
|
|
--
|
|
-- RADIO INFORMATION
|
|
--
|
|
|
|
hzCpRadioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Wireless Interface Radios"
|
|
::= { hzCpWirelessInterfaceRadios 1 }
|
|
|
|
hzCpRadioEntry OBJECT-TYPE
|
|
SYNTAX HzCpRadioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Wireless Interface Radio"
|
|
INDEX { hzCpRadioIndex }
|
|
::= { hzCpRadioTable 1 }
|
|
|
|
HzCpRadioEntry ::= SEQUENCE {
|
|
hzCpRadioIndex
|
|
INTEGER,
|
|
hzCpRadioDescription
|
|
DisplayString,
|
|
hzCpRadioOperStatus
|
|
INTEGER,
|
|
hzCpRadioTxGain
|
|
Integer32,
|
|
hzCpRadioRxGain
|
|
Integer32,
|
|
hzCpRadioReset
|
|
Integer32,
|
|
hzCpRadioTransmitPowerdBm
|
|
Integer32,
|
|
hzCpRadioPowerOption
|
|
INTEGER,
|
|
hzCpRadioTxState
|
|
INTEGER,
|
|
hzCpRadioActualTxState
|
|
INTEGER,
|
|
hzCpRadioTemperature
|
|
Integer32,
|
|
hzCpRadioMaxTransmitPowerdBm
|
|
Integer32,
|
|
hzCpRadioActualTransmitPowerdBm
|
|
Integer32
|
|
}
|
|
|
|
hzCpRadioIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpRadioEntry 1 }
|
|
|
|
hzCpRadioDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information about the radio. Includes the
|
|
manufacturer, product name, software version, serial number, and hardware
|
|
version of the radio."
|
|
::= { hzCpRadioEntry 2 }
|
|
|
|
hzCpRadioOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2),
|
|
testing (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the interface. Testing
|
|
indicates that no operational packets can be passed. Testing
|
|
also indicates that a firmware upgrade may be in progress"
|
|
::= { hzCpRadioEntry 3 }
|
|
|
|
hzCpRadioTxGain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gain of the radio in the transmit chain. Indicates the gain in dB."
|
|
::= { hzCpRadioEntry 4 }
|
|
|
|
hzCpRadioRxGain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gain of the radio in the receive chain. Indicates the gain in dB."
|
|
::= { hzCpRadioEntry 5 }
|
|
|
|
hzCpRadioReset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing 1 to this object causes the radio to be reset. All other values
|
|
are not recognized. This variable always reads back as 0. radioOperStatus
|
|
should be polled by the user after this object is written to, to verify
|
|
that the radio card has been reset."
|
|
::= { hzCpRadioEntry 6 }
|
|
|
|
hzCpRadioTransmitPowerdBm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the programmed transmit level of the radio.
|
|
The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm.
|
|
Notes:
|
|
- If HAAM is enabled, transmit power cannot be changed.
|
|
- Programmed and Actual transmit power may differ - see hzCpRadioActualTransmitPower."
|
|
DEFVAL { 0 }
|
|
::= { hzCpRadioEntry 7 }
|
|
|
|
hzCpRadioPowerOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
highPower (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the power option of the radio: normal or high power."
|
|
::= { hzCpRadioEntry 8 }
|
|
|
|
hzCpRadioTxState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the power option of the radio: normal or high power."
|
|
::= { hzCpRadioEntry 9 }
|
|
|
|
hzCpRadioActualTxState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the actual transmit state of the radio."
|
|
::= { hzCpRadioEntry 10 }
|
|
|
|
hzCpRadioTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius."
|
|
::= { hzCpRadioEntry 11 }
|
|
|
|
hzCpRadioMaxTransmitPowerdBm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum Transmit Power allowed."
|
|
::= { hzCpRadioEntry 12 }
|
|
|
|
hzCpRadioActualTransmitPowerdBm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the actual transmit level of the radio.
|
|
The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm.
|
|
This value will be undefined:
|
|
- If the radio is operational and muted.
|
|
- If the radio is not operational.
|
|
- If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99."
|
|
::= { hzCpRadioEntry 13 }
|
|
|
|
hzCpRadio1FreqGroupSelected OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
txLow (1),
|
|
txHigh (2),
|
|
none (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency group selected for Radio 1.
|
|
|
|
The frequency subbands are divided into frequency groups txHigh and txLow. A system must have one node configured to txLow and the other node configure to txHigh"
|
|
::= { hzCpWirelessInterfaceRadio1Frequencies 1 }
|
|
|
|
hzCpRadio1BandTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRadio1BandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of radio bands for Radio 1. Frequency bands are divided into sub bands.
|
|
|
|
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
|
|
fcc23d which make up the entire FCC23 band"
|
|
::= { hzCpWirelessInterfaceRadio1Frequencies 2 }
|
|
|
|
hzCpRadio1BandEntry OBJECT-TYPE
|
|
SYNTAX HzCpRadio1BandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A radio band entry containing all the radio band values"
|
|
INDEX { hzCpRadio1BandIndex }
|
|
::= { hzCpRadio1BandTable 1 }
|
|
|
|
HzCpRadio1BandEntry ::= SEQUENCE {
|
|
hzCpRadio1BandIndex
|
|
Integer32,
|
|
hzCpRadio1BandId
|
|
Integer32,
|
|
hzCpRadio1BandName
|
|
DisplayString,
|
|
hzCpRadio1BandProgrammed
|
|
INTEGER
|
|
}
|
|
|
|
hzCpRadio1BandIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each radio band. "
|
|
::= { hzCpRadio1BandEntry 1 }
|
|
|
|
hzCpRadio1BandId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"radio band ID.
|
|
Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes."
|
|
::= { hzCpRadio1BandEntry 2 }
|
|
|
|
hzCpRadio1BandName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The radio band name."
|
|
::= { hzCpRadio1BandEntry 3 }
|
|
|
|
hzCpRadio1BandProgrammed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notActive (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operating radio band for the modem.
|
|
|
|
***Only 1 index may be selected in a 1 modem system."
|
|
DEFVAL { notActive }
|
|
::= { hzCpRadio1BandEntry 4 }
|
|
|
|
hzCpRadio1FreqTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRadio1FreqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of txHigh frequency settings for Radio 1"
|
|
::= { hzCpWirelessInterfaceRadio1Frequencies 3 }
|
|
|
|
hzCpRadio1FreqEntry OBJECT-TYPE
|
|
SYNTAX HzCpRadio1FreqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A TX-High or TX-Low Frequency entry containing all the frequency values"
|
|
INDEX { hzCpRadio1FreqIndex }
|
|
::= { hzCpRadio1FreqTable 1 }
|
|
|
|
HzCpRadio1FreqEntry ::= SEQUENCE {
|
|
hzCpRadio1FreqIndex
|
|
Integer32,
|
|
hzCpRadio1FreqChannelIndex
|
|
DisplayString,
|
|
hzCpRadio1FreqTransmitRfFrequency
|
|
Integer32,
|
|
hzCpRadio1FreqReceiveRfFrequency
|
|
Integer32,
|
|
hzCpRadio1FreqProgrammed
|
|
INTEGER
|
|
}
|
|
|
|
hzCpRadio1FreqIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each frequency channel. "
|
|
::= { hzCpRadio1FreqEntry 1 }
|
|
|
|
hzCpRadio1FreqChannelIndex OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel index for the frequency."
|
|
::= { hzCpRadio1FreqEntry 2 }
|
|
|
|
hzCpRadio1FreqTransmitRfFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RF TX frequency in KHz."
|
|
::= { hzCpRadio1FreqEntry 3 }
|
|
|
|
hzCpRadio1FreqReceiveRfFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RF RX frequency in KHz."
|
|
::= { hzCpRadio1FreqEntry 4 }
|
|
|
|
hzCpRadio1FreqProgrammed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notActive (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operating frequency channel for the modem.
|
|
|
|
***Only 1 index may be selected in a 1 modem system."
|
|
DEFVAL { notActive }
|
|
::= { hzCpRadio1FreqEntry 5 }
|
|
|
|
hzCpRadio1ProgrammedFrequencyChannel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel that has been programmed for Radio 1."
|
|
::= { hzCpRadio1ProgrammedFrequency 1 }
|
|
|
|
hzCpRadio1ProgrammedFrequencyTxRf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The programmed RF TX frequency in KHz."
|
|
::= { hzCpRadio1ProgrammedFrequency 2 }
|
|
|
|
hzCpRadio1ProgrammedFrequencyRxRf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RF RX frequency in KHz."
|
|
::= { hzCpRadio1ProgrammedFrequency 3 }
|
|
|
|
hzCpSystemModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpSystemModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of system mode settings. Radio Band needs to be configured before the system mode."
|
|
::= { hzCpWirelessInterfaceRadioFrequencies 2 }
|
|
|
|
hzCpSystemModeEntry OBJECT-TYPE
|
|
SYNTAX HzCpSystemModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system mode entry containing all the system mode values"
|
|
INDEX { hzCpSystemModeIndex }
|
|
::= { hzCpSystemModeTable 1 }
|
|
|
|
HzCpSystemModeEntry ::= SEQUENCE {
|
|
hzCpSystemModeIndex
|
|
Integer32,
|
|
hzCpSystemModeId
|
|
Integer32,
|
|
hzCpSystemModeName
|
|
DisplayString,
|
|
hzCpSystemModeProgrammed
|
|
INTEGER
|
|
}
|
|
|
|
hzCpSystemModeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each system mode. "
|
|
::= { hzCpSystemModeEntry 1 }
|
|
|
|
hzCpSystemModeId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System mode Id. "
|
|
::= { hzCpSystemModeEntry 2 }
|
|
|
|
hzCpSystemModeName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system mode name."
|
|
::= { hzCpSystemModeEntry 3 }
|
|
|
|
hzCpSystemModeProgrammed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notActive (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operating system mode for the modem.
|
|
|
|
Notes:
|
|
Set Radio Band before System Mode
|
|
Only 1 index may be selected.
|
|
Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes."
|
|
DEFVAL { notActive }
|
|
::= { hzCpSystemModeEntry 4 }
|
|
|
|
hzCpApplyFrequencyChangesToSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If system allows, setting this oid applies the radio band, system mode and frequency changes dynamilcally and a system reset can be avoided. "
|
|
::= { hzCpWirelessInterfaceRadioFrequencies 3 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpWirelessInterfaceAntenna
|
|
-- ----------------------------
|
|
|
|
hzCpAntennaDiameter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the diameter of the antenna represented in inches."
|
|
::= { hzCpWirelessInterfaceAntenna 1 }
|
|
|
|
hzCpAntennaTilt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
vertical (2),
|
|
horizontal (3),
|
|
flat (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the position of the antenna for radio 1."
|
|
::= { hzCpWirelessInterfaceAntenna 2 }
|
|
|
|
hzCpDroppedFramesThresholdParams OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command."
|
|
::= { hzCpAggregatedThresholdAlarm 1 }
|
|
|
|
hzCpBwUtilizationThresholdParams OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command."
|
|
::= { hzCpAggregatedThresholdAlarm 2 }
|
|
|
|
hzCpQBasedThresholdAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpQBasedThresholdAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Q based Threshold Alarm settings"
|
|
::= { hzCpQBasedThresholdAlarm 1 }
|
|
|
|
hzCpQBasedThresholdAlarmEntry OBJECT-TYPE
|
|
SYNTAX HzCpQBasedThresholdAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry based queues."
|
|
INDEX { hzCpQBasedThresholdIndex }
|
|
::= { hzCpQBasedThresholdAlarmTable 1 }
|
|
|
|
HzCpQBasedThresholdAlarmEntry ::= SEQUENCE {
|
|
hzCpQBasedThresholdIndex
|
|
INTEGER,
|
|
hzCpQBasedDepthThresholdParams
|
|
DisplayString,
|
|
hzCpQBasedDroppedFramesThresholdParams
|
|
DisplayString
|
|
}
|
|
|
|
hzCpQBasedThresholdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for one of the 8 queues"
|
|
::= { hzCpQBasedThresholdAlarmEntry 1 }
|
|
|
|
hzCpQBasedDepthThresholdParams OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded."
|
|
::= { hzCpQBasedThresholdAlarmEntry 2 }
|
|
|
|
hzCpQBasedDroppedFramesThresholdParams OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded."
|
|
::= { hzCpQBasedThresholdAlarmEntry 3 }
|
|
|
|
hzCpWirelessInterfaceThresholdAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpWirelessInterfaceThresholdAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of wireless threshold crossing alarms"
|
|
::= { hzCpThresholdAlarmConfig 3 }
|
|
|
|
hzCpWirelessInterfaceThresholdAlarmEntry OBJECT-TYPE
|
|
SYNTAX HzCpWirelessInterfaceThresholdAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of wireless threshold crossing alarm"
|
|
INDEX { hzCpWirelessInterfaceThresholdAlarmIndex }
|
|
::= { hzCpWirelessInterfaceThresholdAlarmTable 1 }
|
|
|
|
HzCpWirelessInterfaceThresholdAlarmEntry ::= SEQUENCE {
|
|
hzCpWirelessInterfaceThresholdAlarmIndex
|
|
INTEGER,
|
|
hzCpWirelessInterfaceRslThresholdParams
|
|
DisplayString,
|
|
hzCpWirelessInterfaceSnrThreshold
|
|
DisplayString
|
|
}
|
|
|
|
hzCpWirelessInterfaceThresholdAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for each wireless port"
|
|
::= { hzCpWirelessInterfaceThresholdAlarmEntry 1 }
|
|
|
|
hzCpWirelessInterfaceRslThresholdParams OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command."
|
|
::= { hzCpWirelessInterfaceThresholdAlarmEntry 2 }
|
|
|
|
hzCpWirelessInterfaceSnrThreshold OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-write string specifing the modem SNR threshold."
|
|
::= { hzCpWirelessInterfaceThresholdAlarmEntry 3 }
|
|
|
|
hzCpAlarmConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpAlarmConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of alarm configuration"
|
|
::= { hzCpAlarms 2 }
|
|
|
|
hzCpAlarmConfigEntry OBJECT-TYPE
|
|
SYNTAX HzCpAlarmConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of alarm configuration"
|
|
INDEX { hzCpAlarmConfigIndex,
|
|
hzCpAlarmInstanceIndex }
|
|
::= { hzCpAlarmConfigTable 1 }
|
|
|
|
HzCpAlarmConfigEntry ::= SEQUENCE {
|
|
hzCpAlarmConfigIndex
|
|
INTEGER,
|
|
hzCpAlarmInstanceIndex
|
|
Unsigned32,
|
|
hzCpAlarmConfigSeverity
|
|
INTEGER,
|
|
hzCpAlarmConfigState
|
|
INTEGER
|
|
}
|
|
|
|
hzCpAlarmConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
linkDown (1),
|
|
peerAuthenticationFailure (2),
|
|
haamConfigMismatch (3),
|
|
haamOnLowModulation (4),
|
|
atpcConfigMismatch (5),
|
|
atpcAutoDisabled (6),
|
|
sntpUnreachable (7),
|
|
freqFileInvalid (8),
|
|
aggregateDroppedFramesThreshold (9),
|
|
queueDroppedFramesThreshold (10),
|
|
bwUtilizationThreshold (11),
|
|
queueDepthThreshold (12),
|
|
rlsConfigMismatch (13),
|
|
rlsShutdownActivated (14),
|
|
rlsQBasedShutdown (15),
|
|
modemRxLossOfSignal (16),
|
|
modemSnrBelowThreshold (17),
|
|
modemEqStressAboveThreshold (18),
|
|
rslBelowThershold (19),
|
|
radioSynthLostLock (20),
|
|
radioCalTableUnavailable (21),
|
|
radioCurrentOutOfLimits (22),
|
|
radioPowerAmp (23),
|
|
tempOutOfLimits (24),
|
|
redundancyConfigMismatch (25),
|
|
redundancyActiveOnSecondary (26),
|
|
redundancyOperatingInForcedSwitch (27),
|
|
redundancyEnetCrossLinkActive (28),
|
|
redundancyActiveUsingPartnerWLink (29),
|
|
redundancyStandbyWLinkInUse (30),
|
|
redundancyStandbyOnPrimary (31),
|
|
x2DeliveringHalfCapacity (32),
|
|
bncSignalNotDetected (33),
|
|
ethernetSpeedReduced (34),
|
|
synceLostLock (35),
|
|
synceSecondarySourceInUse (36),
|
|
invalidSysConfig (37),
|
|
mibChangeNotSaved (38),
|
|
transmitterLossOfSync (39),
|
|
radioLinearityCalError (40),
|
|
synceConfigMismatch (41),
|
|
cryptoPowerUpTestsFailed (42),
|
|
cyptoConfigMismatch (43)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each alarm."
|
|
::= { hzCpAlarmConfigEntry 1 }
|
|
|
|
hzCpAlarmInstanceIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each instance of an alarm."
|
|
::= { hzCpAlarmConfigEntry 2 }
|
|
|
|
hzCpAlarmConfigSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
minor (1),
|
|
major (2),
|
|
critical (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity of the alarm as minor, major or critical."
|
|
::= { hzCpAlarmConfigEntry 3 }
|
|
|
|
hzCpAlarmConfigState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the alarm which can be either enabled or disabled."
|
|
::= { hzCpAlarmConfigEntry 4 }
|
|
|
|
hzCpAlarmStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpAlarmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of alarm status"
|
|
::= { hzCpAlarms 3 }
|
|
|
|
hzCpAlarmStatusEntry OBJECT-TYPE
|
|
SYNTAX HzCpAlarmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of alarm status"
|
|
INDEX { hzCpAlarmStatusIndex,
|
|
hzCpAlarmStatusInstanceIndex }
|
|
::= { hzCpAlarmStatusTable 1 }
|
|
|
|
HzCpAlarmStatusEntry ::= SEQUENCE {
|
|
hzCpAlarmStatusIndex
|
|
INTEGER,
|
|
hzCpAlarmStatusInstanceIndex
|
|
Unsigned32,
|
|
hzCpAlarmStatus
|
|
INTEGER,
|
|
hzCpAlarmRaisedDateAndTime
|
|
DateAndTime,
|
|
hzCpAlarmClearedDateAndTime
|
|
DateAndTime
|
|
}
|
|
|
|
hzCpAlarmStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
linkDown (1),
|
|
peerAuthenticationFailure (2),
|
|
haamConfigMismatch (3),
|
|
haamOnLowModulation (4),
|
|
atpcConfigMismatch (5),
|
|
atpcAutoDisabled (6),
|
|
sntpUnreachable (7),
|
|
freqFileInvalid (8),
|
|
aggregateDroppedFramesThreshold (9),
|
|
queueDroppedFramesThreshold (10),
|
|
bwUtilizationThreshold (11),
|
|
queueDepthThreshold (12),
|
|
rlsConfigMismatch (13),
|
|
rlsShutdownActivated (14),
|
|
rlsQBasedShutdown (15),
|
|
modemRxLossOfSignal (16),
|
|
modemSnrBelowThreshold (17),
|
|
modemEqStressAboveThreshold (18),
|
|
rslBelowThershold (19),
|
|
radioSynthLostLock (20),
|
|
radioCalTableUnavailable (21),
|
|
radioCurrentOutOfLimits (22),
|
|
radioPowerAmp (23),
|
|
tempOutOfLimits (24),
|
|
redundancyConfigMismatch (25),
|
|
redundancyActiveOnSecondary (26),
|
|
redundancyOperatingInForcedSwitch (27),
|
|
redundancyEnetCrossLinkActive (28),
|
|
redundancyActiveUsingPartnerWLink (29),
|
|
redundancyStandbyWLinkInUse (30),
|
|
redundancyStandbyOnPrimary (31),
|
|
x2DeliveringHalfCapacity (32),
|
|
bncSignalNotDetected (33),
|
|
ethernetSpeedReduced (34),
|
|
synceLostLock (35),
|
|
synceSecondarySourceInUse (36),
|
|
invalidSysConfig (37),
|
|
mibChangeNotSaved (38),
|
|
transmitterLossOfSync (39),
|
|
radioLinearityCalError (40),
|
|
synceConfigMismatch (41),
|
|
cryptoPowerUpTestsFailed (42),
|
|
cryptoConfigMismatch (43)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each alarm."
|
|
::= { hzCpAlarmStatusEntry 1 }
|
|
|
|
hzCpAlarmStatusInstanceIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each instance of an alarm."
|
|
::= { hzCpAlarmStatusEntry 2 }
|
|
|
|
hzCpAlarmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the alarm exists or not."
|
|
::= { hzCpAlarmStatusEntry 3 }
|
|
|
|
hzCpAlarmRaisedDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the date and time when the alarm was raised. If the alarm never occured, the value shows as zero."
|
|
::= { hzCpAlarmStatusEntry 4 }
|
|
|
|
hzCpAlarmClearedDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the date and time when the alarm was cleared. If the alarm never occured, the value shows as zero."
|
|
::= { hzCpAlarmStatusEntry 5 }
|
|
|
|
--
|
|
-- Giga Ethernet Qos
|
|
--
|
|
|
|
hzCpQosEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether QOS is enabled."
|
|
DEFVAL { disabled }
|
|
::= { hzCpQos 1 }
|
|
|
|
hzCpCosType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cosVlan (1),
|
|
cosQinQiTag (2),
|
|
cosQinQoTag (3),
|
|
cosDscp (4),
|
|
cosMplsExp (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag."
|
|
DEFVAL { cosVlan }
|
|
::= { hzCpQos 2 }
|
|
|
|
--
|
|
-- 802.1p priorities assignment.
|
|
--
|
|
|
|
hzCpCosQinQiTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100."
|
|
::= { hzCpQos 3 }
|
|
|
|
hzCpCosQinQoTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100."
|
|
::= { hzCpQos 4 }
|
|
|
|
--
|
|
-- Queue operation mode
|
|
--
|
|
|
|
hzCpCosExpediteQueue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the user queue operation mode. (a) In expedite mode,
|
|
any Queue can be assigned 100% of CIR. Queue 4 is serviced first
|
|
and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs
|
|
must be equal to 100%. In this mode higher priority queues
|
|
will be serviced first until that queue is emptied or
|
|
the defined CIR is reached."
|
|
DEFVAL { disabled }
|
|
::= { hzCpQos 5 }
|
|
|
|
--
|
|
-- user queues configuration.
|
|
--
|
|
|
|
hzCpCosQueueCIR OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Committed Information Rate (CIR) assignments for CoS queues
|
|
1 to 4. CIR is assigned as the percentage of system current speed.
|
|
When expedite queue is enabled any queue can be assigned 100% bandwidth.
|
|
When expedite queue is disabled the sum of CIR of all queues should be 100."
|
|
::= { hzCpQos 6 }
|
|
|
|
hzCpCosQueueCBS OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Comitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage
|
|
of total packet buffer size. The sum of CBS's of all 4
|
|
queues must be equal to 100. Minimum CBS assignable to any queue
|
|
is 1."
|
|
::= { hzCpQos 7 }
|
|
|
|
--
|
|
-- hzCpCosWfq
|
|
--
|
|
|
|
hzCpQosPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict-priority (1),
|
|
wfq (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the Qos policy."
|
|
::= { hzCpQos 8 }
|
|
|
|
hzCpCosWfqWeight OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the
|
|
queues proportional to their weight.
|
|
The weights have values from 0-15, where 0 is the lowest weight and
|
|
15 is the highest weight.
|
|
Setting the Cos weight example: 1 2 3 4."
|
|
::= { hzCpQos 9 }
|
|
|
|
hzCpCosNumPriorityQueues OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When expedite queue is enabled, user can set the number of priority queues. The default value for number of priority queues are 2, maximum is 4 and minimum is 1. "
|
|
::= { hzCpQos 10 }
|
|
|
|
hzCpCosCutThroughQueue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
q1 (2),
|
|
q2 (3),
|
|
q3 (4),
|
|
q4 (5),
|
|
q5 (6),
|
|
q6 (7),
|
|
q7 (8),
|
|
q8 (9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cut through queue can be enabled or disabled. Any one of the 8 queues can be selected as cut through queue."
|
|
::= { hzCpQos 11 }
|
|
|
|
hzCpQosPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpQosPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Qos Settings per port"
|
|
::= { hzCpQos 12 }
|
|
|
|
hzCpQosPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HzCpQosPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Qos setting per port"
|
|
INDEX { hzCpCosPortIndex }
|
|
::= { hzCpQosPortConfigTable 1 }
|
|
|
|
HzCpQosPortConfigEntry ::= SEQUENCE {
|
|
hzCpCosPortIndex
|
|
INTEGER,
|
|
hzCpCosQueueMapping
|
|
DisplayString,
|
|
hzCpCosDefaultValue
|
|
Integer32
|
|
}
|
|
|
|
hzCpCosPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enet-port-1 (1),
|
|
enet-port-2 (2),
|
|
enet-port-3 (3),
|
|
enet-port-4 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name identifying each enet port"
|
|
::= { hzCpQosPortConfigEntry 1 }
|
|
|
|
hzCpCosQueueMapping OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User queue assignments for CoS values 0 to 7.
|
|
There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
|
|
CoS to queue mapping example: 1 7 2 8 3 6 1 4."
|
|
::= { hzCpQosPortConfigEntry 2 }
|
|
|
|
hzCpCosDefaultValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default CoS value assigned to the ethernet
|
|
frames that don't have VLAN or Q-in-Q tag."
|
|
DEFVAL { 0 }
|
|
::= { hzCpQosPortConfigEntry 3 }
|
|
|
|
hzCpCosUserFlowDepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpCosUserFlowDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of Cos user flow setting"
|
|
::= { hzCpQos 13 }
|
|
|
|
hzCpCosUserFlowDepEntry OBJECT-TYPE
|
|
SYNTAX HzCpCosUserFlowDepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry of Cos user flow setting"
|
|
INDEX { hzCpCosUserFlowIndexDep }
|
|
::= { hzCpCosUserFlowDepTable 1 }
|
|
|
|
HzCpCosUserFlowDepEntry ::= SEQUENCE {
|
|
hzCpCosUserFlowIndexDep
|
|
INTEGER,
|
|
hzCpCosUserFlowStateDep
|
|
DisplayString
|
|
}
|
|
|
|
hzCpCosUserFlowIndexDep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flow1 (1),
|
|
flow2 (2),
|
|
flow3 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by hzCpCosUserFlowMappingIndex."
|
|
::= { hzCpCosUserFlowDepEntry 1 }
|
|
|
|
hzCpCosUserFlowStateDep OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is deprecated by entries in hzCpCosUserFlowMappingTable."
|
|
::= { hzCpCosUserFlowDepEntry 2 }
|
|
|
|
hzCpCosUserClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpCosUserClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Cos user class setting."
|
|
::= { hzCpQos 14 }
|
|
|
|
hzCpCosUserClassEntry OBJECT-TYPE
|
|
SYNTAX HzCpCosUserClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Cos user class setting."
|
|
INDEX { hzCpCosUserClassIndex }
|
|
::= { hzCpCosUserClassTable 1 }
|
|
|
|
HzCpCosUserClassEntry ::= SEQUENCE {
|
|
hzCpCosUserClassIndex
|
|
INTEGER,
|
|
hzCpCosUserClassOffset
|
|
Integer32,
|
|
hzCpCosUserClassValue
|
|
DisplayString,
|
|
hzCpCosUserClassMask
|
|
DisplayString
|
|
}
|
|
|
|
hzCpCosUserClassIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
c1 (1),
|
|
c2 (2),
|
|
c3 (3),
|
|
c4 (4),
|
|
c5 (5),
|
|
c6 (6),
|
|
c7 (7),
|
|
c8 (8),
|
|
c9 (9),
|
|
c10 (10),
|
|
c11 (11),
|
|
c12 (12),
|
|
c13 (13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name specifying user class group."
|
|
::= { hzCpCosUserClassEntry 1 }
|
|
|
|
hzCpCosUserClassOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the user class offset. The valid range is 0-31."
|
|
::= { hzCpCosUserClassEntry 2 }
|
|
|
|
hzCpCosUserClassValue OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string specifying the user class value in hex format. The string must hold even number of characters."
|
|
::= { hzCpCosUserClassEntry 3 }
|
|
|
|
hzCpCosUserClassMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string specifying the user class mask in hex format. The string must hold even number of characters and have the same length as the user class value."
|
|
::= { hzCpCosUserClassEntry 4 }
|
|
|
|
hzCpCosUserFlowFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpCosUserFlowFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Cos user flow filter setting."
|
|
::= { hzCpQos 15 }
|
|
|
|
hzCpCosUserFlowFilterEntry OBJECT-TYPE
|
|
SYNTAX HzCpCosUserFlowFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Cos user flow filter setting."
|
|
INDEX { hzCpCosUserFlowFilterIndex }
|
|
::= { hzCpCosUserFlowFilterTable 1 }
|
|
|
|
HzCpCosUserFlowFilterEntry ::= SEQUENCE {
|
|
hzCpCosUserFlowFilterIndex
|
|
INTEGER,
|
|
hzCpCosUserFlowFilter
|
|
DisplayString
|
|
}
|
|
|
|
hzCpCosUserFlowFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flow1 (1),
|
|
flow2 (2),
|
|
flow3 (3),
|
|
flow4 (4),
|
|
flow5 (5),
|
|
flow6 (6),
|
|
flow7 (7),
|
|
flow8 (8),
|
|
flow9 (9),
|
|
flow10 (10),
|
|
flow11 (11),
|
|
flow12 (12),
|
|
flow13 (13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name specifying user flow group."
|
|
::= { hzCpCosUserFlowFilterEntry 1 }
|
|
|
|
hzCpCosUserFlowFilter OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string specifying the user class combination. For example a user flow can be configured to include c1 c5. If a user class hasn't been assigned a value and mask, the class can't be part of the user flow filter. "
|
|
::= { hzCpCosUserFlowFilterEntry 2 }
|
|
|
|
hzCpCosUserFlowMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpCosUserFlowMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Cos user flow mapping setting."
|
|
::= { hzCpQos 16 }
|
|
|
|
hzCpCosUserFlowMappingEntry OBJECT-TYPE
|
|
SYNTAX HzCpCosUserFlowMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of Cos user flow mapping setting."
|
|
INDEX { hzCpCosUserFlowMappingIndex }
|
|
::= { hzCpCosUserFlowMappingTable 1 }
|
|
|
|
HzCpCosUserFlowMappingEntry ::= SEQUENCE {
|
|
hzCpCosUserFlowMappingIndex
|
|
INTEGER,
|
|
hzCpCosUserFlowEnable
|
|
INTEGER,
|
|
hzCpCosUserFlowP1Queue
|
|
INTEGER,
|
|
hzCpCosUserFlowP1TargetPort
|
|
INTEGER,
|
|
hzCpCosUserFlowP2Queue
|
|
INTEGER,
|
|
hzCpCosUserFlowP2TargetPort
|
|
INTEGER,
|
|
hzCpCosUserFlowP3Queue
|
|
INTEGER,
|
|
hzCpCosUserFlowP3TargetPort
|
|
INTEGER,
|
|
hzCpCosUserFlowP4Queue
|
|
INTEGER,
|
|
hzCpCosUserFlowP4TargetPort
|
|
INTEGER
|
|
}
|
|
|
|
hzCpCosUserFlowMappingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flow1 (1),
|
|
flow2 (2),
|
|
flow3 (3),
|
|
flow4 (4),
|
|
flow5 (5),
|
|
flow6 (6),
|
|
flow7 (7),
|
|
flow8 (8),
|
|
flow9 (9),
|
|
flow10 (10),
|
|
flow11 (11),
|
|
flow12 (12),
|
|
flow13 (13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name specifying user flow group."
|
|
::= { hzCpCosUserFlowMappingEntry 1 }
|
|
|
|
hzCpCosUserFlowEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables a CoS user flow."
|
|
::= { hzCpCosUserFlowMappingEntry 2 }
|
|
|
|
hzCpCosUserFlowP1Queue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the selected queue for P1."
|
|
::= { hzCpCosUserFlowMappingEntry 3 }
|
|
|
|
hzCpCosUserFlowP1TargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target egress port for P1."
|
|
::= { hzCpCosUserFlowMappingEntry 4 }
|
|
|
|
hzCpCosUserFlowP2Queue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the selected queue for P2."
|
|
::= { hzCpCosUserFlowMappingEntry 5 }
|
|
|
|
hzCpCosUserFlowP2TargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target egress port for P2."
|
|
::= { hzCpCosUserFlowMappingEntry 6 }
|
|
|
|
hzCpCosUserFlowP3Queue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the selected queue for P3."
|
|
::= { hzCpCosUserFlowMappingEntry 7 }
|
|
|
|
hzCpCosUserFlowP3TargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target egress port for P3."
|
|
::= { hzCpCosUserFlowMappingEntry 8 }
|
|
|
|
hzCpCosUserFlowP4Queue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
q1 (1),
|
|
q2 (2),
|
|
q3 (3),
|
|
q4 (4),
|
|
q5 (5),
|
|
q6 (6),
|
|
q7 (7),
|
|
q8 (8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the selected queue for P4."
|
|
::= { hzCpCosUserFlowMappingEntry 9 }
|
|
|
|
hzCpCosUserFlowP4TargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p1 (1),
|
|
p2 (2),
|
|
p3 (3),
|
|
p4 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target egress port for P4."
|
|
::= { hzCpCosUserFlowMappingEntry 10 }
|
|
|
|
hzCpRlsMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
basic (2),
|
|
advanced (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Off, when the RLS feature is disabled. Basic when the feature is enabled but hard fault monitor is disabled. Advanced when the feature is enabled and hard fault monitor is enabled. Changing this option requires a system reset."
|
|
::= { hzCpRapidLinkShutdown 1 }
|
|
|
|
hzCpRlsLinkControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
manual (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns RLS user control for re-enabling failed link. If manual, then user has to explicitly enable the link.
|
|
"
|
|
DEFVAL { auto }
|
|
::= { hzCpRapidLinkShutdown 2 }
|
|
|
|
hzCpApplyRlsMonitorParametersToSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'."
|
|
::= { hzCpRapidLinkShutdown 3 }
|
|
|
|
hzCpRlsLinkEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns RLS global link enable status as on or off. If off, the link will be shutdown."
|
|
::= { hzCpRapidLinkShutdown 4 }
|
|
|
|
hzCpRlsPortGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the RLS port group configuration setting. Options are the port list and any/all.
|
|
For example:
|
|
p1,p3 any - RLS will trigger if either p1 or p3 is down.
|
|
or
|
|
p1,p2,p3 all - RLS will trigger only if all p1,p2 and p3 are down.
|
|
"
|
|
::= { hzCpRapidLinkShutdown 5 }
|
|
|
|
hzCpRlsShutdownPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
port-down (1),
|
|
eoam-msg (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicated whether to shutdown the port or send an EOAM message when RLS is triggered."
|
|
::= { hzCpRapidLinkShutdown 6 }
|
|
|
|
hzCpRlsSoftFaultMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRlsSoftFaultMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of RLS Soft Fault Monitor Parameters"
|
|
::= { hzCpRapidLinkShutdown 7 }
|
|
|
|
hzCpRlsSoftFaultMonitorEntry OBJECT-TYPE
|
|
SYNTAX HzCpRlsSoftFaultMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Parameters for Soft Fault Monitoring"
|
|
INDEX { hzCpRlsSoftFaultMonitorIndex }
|
|
::= { hzCpRlsSoftFaultMonitorTable 1 }
|
|
|
|
HzCpRlsSoftFaultMonitorEntry ::= SEQUENCE {
|
|
hzCpRlsSoftFaultMonitorIndex
|
|
INTEGER,
|
|
hzCpRlsEstablishErredFrameThreshold
|
|
Integer32,
|
|
hzCpRlsShutdownErredFrameThreshold
|
|
Integer32,
|
|
hzCpRlsEstablishNumberOfSamples
|
|
Integer32,
|
|
hzCpRlsShutdownNumberOfSamples
|
|
Integer32,
|
|
hzCpRlsEstablishSamplePeriod
|
|
Integer32,
|
|
hzCpRlsShutdownSamplePeriod
|
|
Integer32,
|
|
hzCpRlsQuickShutdownSamplePeriod
|
|
Integer32
|
|
}
|
|
|
|
hzCpRlsSoftFaultMonitorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpRlsSoftFaultMonitorEntry 1 }
|
|
|
|
hzCpRlsEstablishErredFrameThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum erred blocks, per sample, allowed for link establishment."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 2 }
|
|
|
|
hzCpRlsShutdownErredFrameThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum erred blocks, per sample, allowed before link shutdown."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 3 }
|
|
|
|
hzCpRlsEstablishNumberOfSamples OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of consecutive good samples required before link is established."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 4 }
|
|
|
|
hzCpRlsShutdownNumberOfSamples OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of consecutive erred samples before link is shutdown."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 5 }
|
|
|
|
hzCpRlsEstablishSamplePeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 6 }
|
|
|
|
hzCpRlsShutdownSamplePeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 7 }
|
|
|
|
hzCpRlsQuickShutdownSamplePeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of milliseconds required to classify samples as erred."
|
|
::= { hzCpRlsSoftFaultMonitorEntry 8 }
|
|
|
|
hzCpRlsHardFaultMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRlsHardFaultMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of RLS Hard Fault Monitor Parameters"
|
|
::= { hzCpRapidLinkShutdown 8 }
|
|
|
|
hzCpRlsHardFaultMonitorEntry OBJECT-TYPE
|
|
SYNTAX HzCpRlsHardFaultMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Parameters for Hard Fault Monitoring"
|
|
INDEX { hzCpRlsHardFaultMonitorIndex }
|
|
::= { hzCpRlsHardFaultMonitorTable 1 }
|
|
|
|
HzCpRlsHardFaultMonitorEntry ::= SEQUENCE {
|
|
hzCpRlsHardFaultMonitorIndex
|
|
INTEGER,
|
|
hzCpRlsHardFaultSamplePeriod
|
|
Integer32,
|
|
hzCpRlsHardFaultThreshold
|
|
Integer32
|
|
}
|
|
|
|
hzCpRlsHardFaultMonitorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpRlsHardFaultMonitorEntry 1 }
|
|
|
|
hzCpRlsHardFaultSamplePeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period of time, in milliseconds, for which the rlsFaultThreshold is applied."
|
|
::= { hzCpRlsHardFaultMonitorEntry 2 }
|
|
|
|
hzCpRlsHardFaultThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of the rlsFaultSamplePeriodMilliSeconds period which must be degraded before the link is set to the 'impaired' state."
|
|
::= { hzCpRlsHardFaultMonitorEntry 3 }
|
|
|
|
hzCpRlsReceiveSignalLevelMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRlsReceiveSignalLevelMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of RLS RSL Monitor Parameters"
|
|
::= { hzCpRapidLinkShutdown 9 }
|
|
|
|
hzCpRlsReceiveSignalLevelMonitorEntry OBJECT-TYPE
|
|
SYNTAX HzCpRlsReceiveSignalLevelMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS RSL Monitor Parameters"
|
|
INDEX { hzCpRlsReceiveSignalLevelMonitorIndex }
|
|
::= { hzCpRlsReceiveSignalLevelMonitorTable 1 }
|
|
|
|
HzCpRlsReceiveSignalLevelMonitorEntry ::= SEQUENCE {
|
|
hzCpRlsReceiveSignalLevelMonitorIndex
|
|
INTEGER,
|
|
hzCpRlsMakeRslMonitorRslValue
|
|
DisplayString,
|
|
hzCpRlsMakeRslMonitorPeriod
|
|
Integer32
|
|
}
|
|
|
|
hzCpRlsReceiveSignalLevelMonitorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpRlsReceiveSignalLevelMonitorEntry 1 }
|
|
|
|
hzCpRlsMakeRslMonitorRslValue OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSL threshold, in dBm. When Link is inactive and if RSL
|
|
is higher than this threshold for a desired
|
|
period, the link will become active."
|
|
::= { hzCpRlsReceiveSignalLevelMonitorEntry 2 }
|
|
|
|
hzCpRlsMakeRslMonitorPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired period, in seconds. When Link is inactive and if RSL
|
|
is higher than the desiredthreshold for this
|
|
period, the link will become active."
|
|
::= { hzCpRlsReceiveSignalLevelMonitorEntry 3 }
|
|
|
|
hzCpRlsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpRlsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of RLS Parameters and states"
|
|
::= { hzCpRapidLinkShutdown 10 }
|
|
|
|
hzCpRlsStatusEntry OBJECT-TYPE
|
|
SYNTAX HzCpRlsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Parameters and states"
|
|
INDEX { hzCpRlsStatusIndex }
|
|
::= { hzCpRlsStatusTable 1 }
|
|
|
|
HzCpRlsStatusEntry ::= SEQUENCE {
|
|
hzCpRlsStatusIndex
|
|
INTEGER,
|
|
hzCpRlsOption
|
|
DisplayString,
|
|
hzCpRlsState
|
|
DisplayString,
|
|
hzCpRlsMismatchState
|
|
DisplayString,
|
|
hzCpRlsDegradeMonitorState
|
|
DisplayString,
|
|
hzCpRlsHardFaultMonitorState
|
|
DisplayString,
|
|
hzCpRlsMakeRslThresholdState
|
|
DisplayString,
|
|
hzCpRlsPeerRslState
|
|
DisplayString,
|
|
hzCpRlsRadioInterfaceState
|
|
DisplayString,
|
|
hzCpRlsNetworkInterfaceState
|
|
DisplayString,
|
|
hzCpRlsUserConfiguredEstablishFer
|
|
DisplayString,
|
|
hzCpRlsMinimumAchievableEstablishFer
|
|
DisplayString,
|
|
hzCpRlsUserConfiguredShutdownFer
|
|
DisplayString,
|
|
hzCpRlsMinimumAchievableShutdownFer
|
|
DisplayString,
|
|
hzCpRlsUserConfiguredEstablishMonitorTime
|
|
Integer32,
|
|
hzCpRlsActualEstablishMonitorTime
|
|
Integer32,
|
|
hzCpRlsUserConfiguredShutdownMonitorTime
|
|
Integer32,
|
|
hzCpRlsActualShutdownMonitorTime
|
|
Integer32
|
|
}
|
|
|
|
hzCpRlsStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpRlsStatusEntry 1 }
|
|
|
|
hzCpRlsOption OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Option. On Basic: RLS enabled with base degrade monitoring;
|
|
On Advanced: RLS enabled with hard fault monitoring;
|
|
Off: Entire RLS feature disabled."
|
|
::= { hzCpRlsStatusEntry 2 }
|
|
|
|
hzCpRlsState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Link Shutdown State. If the state is activated, that means
|
|
link is down; If the state is inactivated, that means that
|
|
link is up."
|
|
::= { hzCpRlsStatusEntry 3 }
|
|
|
|
hzCpRlsMismatchState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Mismatch State. If the state is activated, that means RLS
|
|
configuration is mismatched with peer. If the state is OK,
|
|
that means RLS configuration is matched with peer."
|
|
::= { hzCpRlsStatusEntry 4 }
|
|
|
|
hzCpRlsDegradeMonitorState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Degrade Monitor State. If the state is activated, that means
|
|
the RLS Degrade Monitor is asserting the link down. If the
|
|
state is OK, that means the RLS Degrade Monitor is asserting
|
|
the link up."
|
|
::= { hzCpRlsStatusEntry 5 }
|
|
|
|
hzCpRlsHardFaultMonitorState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hard Fault Monitor State. If the state is activated, that means
|
|
the Hard Fault Monitor is asserting the link down. If the state
|
|
is OK, that means the RLS Hard Fault Monitor is asserting the
|
|
link up."
|
|
::= { hzCpRlsStatusEntry 6 }
|
|
|
|
hzCpRlsMakeRslThresholdState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Make RSL Threshold State. If the state is not met, that means the
|
|
RLS signal level is below the threshold value. If the state is OK,
|
|
that means the RLS signal level is above the threshold value."
|
|
::= { hzCpRlsStatusEntry 7 }
|
|
|
|
hzCpRlsPeerRslState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peer RSL State. If the state is activated, that means the peer has
|
|
activated RLS. If the state is OK, that means the Peer hasn't
|
|
activated RLS."
|
|
::= { hzCpRlsStatusEntry 8 }
|
|
|
|
hzCpRlsRadioInterfaceState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Interface State. If the state is down, that means The radio
|
|
interface is not operational(muted,disconnected, not configured).
|
|
If the state is up, that means the radio interface is operational."
|
|
::= { hzCpRlsStatusEntry 9 }
|
|
|
|
hzCpRlsNetworkInterfaceState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Interface State. If the state is down, that means the network
|
|
interface (Ethernet/PHY) is not operational(disconnected, not
|
|
configured). If the state is up, that means the network interface
|
|
(Ethernet/PHY) is operational."
|
|
::= { hzCpRlsStatusEntry 10 }
|
|
|
|
hzCpRlsUserConfiguredEstablishFer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Configured Establish Frame Error Ratio required for the
|
|
link to be restored to service, set by the user. An example
|
|
value being '1.0E-7'."
|
|
::= { hzCpRlsStatusEntry 11 }
|
|
|
|
hzCpRlsMinimumAchievableEstablishFer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum achievable Frame Error Ratio required for the link to be
|
|
restored to service. An example value being '1.0E-7'."
|
|
::= { hzCpRlsStatusEntry 12 }
|
|
|
|
hzCpRlsUserConfiguredShutdownFer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Configured Shutdown Frame Error Ratio required for the
|
|
link to remain in-service, set by the user. An example value
|
|
being '1.0E-7'."
|
|
::= { hzCpRlsStatusEntry 13 }
|
|
|
|
hzCpRlsMinimumAchievableShutdownFer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum achievable Frame Error Ratio required for the link to
|
|
remain in-service. An example value being '1.0E-7'."
|
|
::= { hzCpRlsStatusEntry 14 }
|
|
|
|
hzCpRlsUserConfiguredEstablishMonitorTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Configured Establish Monitor Time, in milliseconds, for
|
|
which the 'User Configured Establish FER' must be achieved
|
|
to bring link into service, set by user"
|
|
::= { hzCpRlsStatusEntry 15 }
|
|
|
|
hzCpRlsActualEstablishMonitorTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual Establish Monitor Time, in milliseconds, for which the
|
|
'User Configured Establish FER'must be achieved to bring
|
|
link into service, it's a multiple of the establish sample
|
|
period required to observe the FER"
|
|
::= { hzCpRlsStatusEntry 16 }
|
|
|
|
hzCpRlsUserConfiguredShutdownMonitorTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Configured Shutdown Monitor Time, in milliseconds, for which
|
|
the 'User Configured Shutdown FER' must be met for the link to
|
|
remain in-service, set by user."
|
|
::= { hzCpRlsStatusEntry 17 }
|
|
|
|
hzCpRlsActualShutdownMonitorTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual Shutdown Monitor Time, in milliseconds, for which the 'User
|
|
Configured Shutdown FER' must be met for the link to remain
|
|
in-service, it's a multiple of the shutdown sample period required
|
|
to observe the FER"
|
|
::= { hzCpRlsStatusEntry 18 }
|
|
|
|
--
|
|
-- hzCpLogs
|
|
--
|
|
|
|
hzCpEventLogEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether event log is enabled."
|
|
DEFVAL { enabled }
|
|
::= { hzCpLogs 1 }
|
|
|
|
hzCpPerfmLogEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether performance log is enabled."
|
|
DEFVAL { enabled }
|
|
::= { hzCpLogs 2 }
|
|
|
|
hzCpPerfmLogInterval OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds)."
|
|
::= { hzCpLogs 3 }
|
|
|
|
hzCpSysLogEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether sys log is enabled."
|
|
::= { hzCpSysLog 1 }
|
|
|
|
hzCpSysLogIpAddressDep OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates the IP address of sys log. This object is deprecated by hzCpSysLogHostAddress. The value is 0.0.0.0 if not available or not applicable."
|
|
::= { hzCpSysLog 2 }
|
|
|
|
hzCpSysLogHostDomain OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates sys log host inet address type. Valid types are ipv4 or ipv6. "
|
|
::= { hzCpSysLog 3 }
|
|
|
|
hzCpSysLogHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates sys log host inet address octet string. This object deprecates hzCpSysLogIpAddressDep."
|
|
::= { hzCpSysLog 4 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpAtpc
|
|
-- ----------------------------
|
|
|
|
hzCpAtpcEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled."
|
|
DEFVAL { off }
|
|
::= { hzCpAtpc 1 }
|
|
|
|
hzCpAtpcStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
disabledAuto (2),
|
|
running (3),
|
|
runningToggling (4),
|
|
suspended (5),
|
|
suspendedLostComm (6),
|
|
suspendedRadioDown (7),
|
|
suspendedRadioMuted (8),
|
|
suspendedRadioLoopback (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the actual condition of ATPC:
|
|
disabled Configuration is set to off.
|
|
disabledAuto Feature was automatically disabled and is transmitting at coordinated power.
|
|
running Feature is running normally.
|
|
runningToggling Feature is toggling between maximum and minimum power to recover from a loss of mod sync.
|
|
suspended Feature was suspended.
|
|
suspendedLostComm Feature is suspended because communication is lost with peer ATPC.
|
|
suspendedRadioDown Feature is suspended because the radio is down.
|
|
suspendedRadioMuted Feature is suspended because the radio is muted.
|
|
suspendedRadioLoopback Feature is suspended because the radio is in loopback mode."
|
|
::= { hzCpAtpc 2 }
|
|
|
|
hzCpAtpcCoordinatedPowerDbm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the coordinated power offset from the configured transmit power.
|
|
The value is multiplied by 10. e.g. A display
|
|
of 133 is actually 13.3 dBm."
|
|
DEFVAL { 0 }
|
|
::= { hzCpAtpc 3 }
|
|
|
|
hzCpAtpcCoordinatedPwrEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled."
|
|
DEFVAL { disabled }
|
|
::= { hzCpAtpc 4 }
|
|
|
|
hzCpAtpcMinTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the minimum ATPC transmit power in dBm x 10. Valid range -990..100."
|
|
::= { hzCpAtpc 5 }
|
|
|
|
hzCpAtpcMaxTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the maximum ATPC transmit power in dBm x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power."
|
|
::= { hzCpAtpc 6 }
|
|
|
|
-- ----------------------------
|
|
-- hzCpHitlessAam
|
|
-- ----------------------------
|
|
|
|
hzCpHitlessAamEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'."
|
|
DEFVAL { off }
|
|
::= { hzCpHitlessAam 1 }
|
|
|
|
hzCpHitlessAamManualMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'."
|
|
::= { hzCpHitlessAam 2 }
|
|
|
|
hzCpHitlessAamWaitToRestore OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read or set the Hitless Automatic Adaptive Modulation (HAAM) wait to restore duration time in seconds."
|
|
::= { hzCpHitlessAam 3 }
|
|
|
|
hzCpHitlessAamOrgSpecEoamMsg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turns on or off the Hitless Automatic Adaptive Modulation (HAAM) Organizational Specific EOAM message to peer."
|
|
::= { hzCpHitlessAam 4 }
|
|
|
|
-- ----------------
|
|
-- hzCpHitlessAamTable
|
|
-- ----------------
|
|
|
|
hzCpHitlessAamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpHitlessAamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Hitless Aam."
|
|
::= { hzCpHitlessAam 5 }
|
|
|
|
hzCpHitlessAamEntry OBJECT-TYPE
|
|
SYNTAX HzCpHitlessAamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Aam Status and Configurations."
|
|
INDEX { hzCpWirelessPortIndex }
|
|
::= { hzCpHitlessAamTable 1 }
|
|
|
|
HzCpHitlessAamEntry ::= SEQUENCE {
|
|
hzCpWirelessPortIndex
|
|
INTEGER,
|
|
hzCpHitlessAamCurrentMode
|
|
DisplayString
|
|
}
|
|
|
|
hzCpWirelessPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wireless-port-1 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. "
|
|
::= { hzCpHitlessAamEntry 1 }
|
|
|
|
hzCpHitlessAamCurrentMode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only string specifing the currently running Hitless AAM Mode."
|
|
::= { hzCpHitlessAamEntry 2 }
|
|
|
|
hzCpHitlessAamModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HzCpHitlessAamModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of HitlessAam available modes."
|
|
::= { hzCpHitlessAam 6 }
|
|
|
|
hzCpHitlessAamModeEntry OBJECT-TYPE
|
|
SYNTAX HzCpHitlessAamModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A HAAM mode entry containing all the HAAM system mode values"
|
|
INDEX { hzCpHitlessAamModeIndex }
|
|
::= { hzCpHitlessAamModeTable 1 }
|
|
|
|
HzCpHitlessAamModeEntry ::= SEQUENCE {
|
|
hzCpHitlessAamModeIndex
|
|
Integer32,
|
|
hzCpHitlessAammModeName
|
|
DisplayString,
|
|
hzCpHitlessAamModeRange
|
|
INTEGER
|
|
}
|
|
|
|
hzCpHitlessAamModeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each Hitless Aam mode. "
|
|
::= { hzCpHitlessAamModeEntry 1 }
|
|
|
|
hzCpHitlessAammModeName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hitless Aam mode name."
|
|
::= { hzCpHitlessAamModeEntry 2 }
|
|
|
|
hzCpHitlessAamModeRange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAllowed (1),
|
|
allowed (2),
|
|
max (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the Hitless Aam available and max system mode. Only max option is allowed to be set in this release."
|
|
DEFVAL { notAllowed }
|
|
::= { hzCpHitlessAamModeEntry 3 }
|
|
|
|
-- NOTIFICATION_TYPE
|
|
-- for generic traps real trap value of linkDown is 2.
|
|
|
|
hzCpLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
ifIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration."
|
|
::= { hzCpSnmpNotifications 1 }
|
|
|
|
-- for generic traps real trap value of linkup is 3.
|
|
|
|
hzCpLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
ifIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up."
|
|
::= { hzCpSnmpNotifications 2 }
|
|
|
|
hzCpPeerAuthenticationFailure NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty
|
|
cable between the modem and radio, and recommended course of action is to check both ends of the link."
|
|
::= { hzCpSnmpNotifications 3 }
|
|
|
|
hzCpPeerAuthenticationFailureCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. The peer node is now authenticated."
|
|
::= { hzCpSnmpNotifications 4 }
|
|
|
|
hzCpHitlessAamConfigMisMatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Automatic Adaptive modulation configuration mismatch"
|
|
::= { hzCpSnmpNotifications 5 }
|
|
|
|
hzCpHitlessAamConfigMisMatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Automatic Adaptive modulation configuration mismatch cleared"
|
|
::= { hzCpSnmpNotifications 6 }
|
|
|
|
hzCpHitlessAamModulationLowered NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Automatic Adaptive modulation on and system running on lowest modulation"
|
|
::= { hzCpSnmpNotifications 7 }
|
|
|
|
hzCpHitlessAamModulationLoweredCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Automatic Adaptive modulation on system running on higher modulation"
|
|
::= { hzCpSnmpNotifications 8 }
|
|
|
|
hzCpHitlessAamModulationChangedEvent NOTIFICATION-TYPE
|
|
OBJECTS { hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hitless Automatic Adaptive has changed modulation."
|
|
::= { hzCpSnmpNotifications 9 }
|
|
|
|
hzCpAtpcConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATPC configuration mismatch in the Horizon Compact Plus systems. ATPC is enabled at one system, but disabled at the other system."
|
|
::= { hzCpSnmpNotifications 10 }
|
|
|
|
hzCpAtpcConfigMismatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC."
|
|
::= { hzCpSnmpNotifications 11 }
|
|
|
|
hzCpAtpcAutoDisabled NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATPC auto-disabled (transmitting at coordinated power)."
|
|
::= { hzCpSnmpNotifications 12 }
|
|
|
|
hzCpAtpcAutoDisabledCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATPC has been enabled."
|
|
::= { hzCpSnmpNotifications 13 }
|
|
|
|
hzCpNoSntpServersReachable NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Can't reach any of the SNTP servers"
|
|
::= { hzCpSnmpNotifications 14 }
|
|
|
|
hzCpNoSntpServersReachableCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At least one of SNTP servers is reachable"
|
|
::= { hzCpSnmpNotifications 15 }
|
|
|
|
hzCpFrequencyFileInvalid NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when the executing frequency file is invalid."
|
|
::= { hzCpSnmpNotifications 16 }
|
|
|
|
hzCpAggregateDroppedFramesThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet dropped frames threshold has been detected above its threshold value."
|
|
::= { hzCpSnmpNotifications 17 }
|
|
|
|
hzCpAggregateDroppedFramesThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. The ethernet dropped frames threshold is now below its threshold value."
|
|
::= { hzCpSnmpNotifications 18 }
|
|
|
|
hzCpQueueDroppedFramesThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpQBasedThresholdIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet queue based dropped frames threshold has been detected above its threshold value."
|
|
::= { hzCpSnmpNotifications 19 }
|
|
|
|
hzCpQueueDroppedFramesThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpQBasedThresholdIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. The ethernet queue based dropped frames threshold is now below its threshold value."
|
|
::= { hzCpSnmpNotifications 20 }
|
|
|
|
hzCpBwUtilizationThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet bandwidth threshold has been detected above its threshold value."
|
|
::= { hzCpSnmpNotifications 21 }
|
|
|
|
hzCpBwUtilizationThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. The ethernet bandwidth threshold is now below its threshold value."
|
|
::= { hzCpSnmpNotifications 22 }
|
|
|
|
hzCpQueueDepthThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpQBasedThresholdIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet queue depth threshold has been detected above its threshold value."
|
|
::= { hzCpSnmpNotifications 23 }
|
|
|
|
hzCpQueueDepthThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpQBasedThresholdIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. The ethernet queue depth threshold is now below its threshold value."
|
|
::= { hzCpSnmpNotifications 24 }
|
|
|
|
hzCpRlsConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Configuration mismatch"
|
|
::= { hzCpSnmpNotifications 25 }
|
|
|
|
hzCpRlsConfigMismatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. "
|
|
::= { hzCpSnmpNotifications 26 }
|
|
|
|
hzCpRlsShutdownActivated NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS shutdown activated"
|
|
::= { hzCpSnmpNotifications 27 }
|
|
|
|
hzCpRlsShutdownActivatedCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS shutdown activated condition has cleared."
|
|
::= { hzCpSnmpNotifications 28 }
|
|
|
|
hzCpRlsQueueBasedShutdownActivated NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Queue-Based shutdown is activated"
|
|
::= { hzCpSnmpNotifications 29 }
|
|
|
|
hzCpRlsQueueBasedShutdownActivatedCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RLS Queue-Based shutdown is not activated"
|
|
::= { hzCpSnmpNotifications 30 }
|
|
|
|
hzCpModemRxLossOfSignalLock NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end,
|
|
and recommended course of action is to check the operational state of both ends of the link."
|
|
::= { hzCpSnmpNotifications 31 }
|
|
|
|
hzCpModemRxLossOfSignalLockCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of signal lock from demodulator condition has cleared."
|
|
::= { hzCpSnmpNotifications 32 }
|
|
|
|
hzCpModemSnrBelowThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause
|
|
is physical interference in the air link path or misalignment of the radios or severe weather conditions,
|
|
and recommended course of action is to check the line of site between the horizon nodes."
|
|
::= { hzCpSnmpNotifications 33 }
|
|
|
|
hzCpModemSnrBelowThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR performance back to normal."
|
|
::= { hzCpSnmpNotifications 34 }
|
|
|
|
hzCpModemEqualizerStressThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Equalizer Stress measured within the demodulator exceeds the threshold value."
|
|
::= { hzCpSnmpNotifications 35 }
|
|
|
|
hzCpModemEqualizerStressThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Equalizer Stress measured within the demodulator is within the threshold value."
|
|
::= { hzCpSnmpNotifications 36 }
|
|
|
|
hzCpRslBelowThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSL has been detected below its minimum threshold."
|
|
::= { hzCpSnmpNotifications 37 }
|
|
|
|
hzCpRslBelowThresholdCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpModemIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The condition has cleared. RSL is now above its minimum threshold."
|
|
::= { hzCpSnmpNotifications 38 }
|
|
|
|
hzCpRadioSynthLostLock NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair,
|
|
and recommended course of action is to replace the radio unit"
|
|
::= { hzCpSnmpNotifications 39 }
|
|
|
|
hzCpRadioSynthLostLockCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The radio PLDRO/LO lost lock condition has cleared."
|
|
::= { hzCpSnmpNotifications 40 }
|
|
|
|
hzCpRadioCalTableNotAvailable NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temp comp table not available."
|
|
::= { hzCpSnmpNotifications 41 }
|
|
|
|
hzCpRadioCalTableNotAvailableCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cal table is now available."
|
|
::= { hzCpSnmpNotifications 42 }
|
|
|
|
hzCpRadioDrainCurrentOutOfLimit NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio current out of limits."
|
|
::= { hzCpSnmpNotifications 43 }
|
|
|
|
hzCpRadioDrainCurrentOutOfLimitCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio current out of limits cleared."
|
|
::= { hzCpSnmpNotifications 44 }
|
|
|
|
hzCpRadioPowerAmplifier NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio power amplifier"
|
|
::= { hzCpSnmpNotifications 45 }
|
|
|
|
hzCpRadioPowerAmplifierCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpRadioIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio power amplifier cleared"
|
|
::= { hzCpSnmpNotifications 46 }
|
|
|
|
hzCpTemperatureOutOfLimit NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio temperature out of limits."
|
|
::= { hzCpSnmpNotifications 47 }
|
|
|
|
hzCpTemperatureOutOfLimitCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio temperature out of limits cleared."
|
|
::= { hzCpSnmpNotifications 48 }
|
|
|
|
hzCpRedundancyConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer."
|
|
::= { hzCpSnmpNotifications 49 }
|
|
|
|
hzCpRedundancyConfigMismatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer."
|
|
::= { hzCpSnmpNotifications 50 }
|
|
|
|
hzCpRedundancyActiveOnSecondary NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary unit is processing the user traffic."
|
|
::= { hzCpSnmpNotifications 51 }
|
|
|
|
hzCpRedundancyActiveOnSecondaryCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary unit processing the user traffic condition is cleared."
|
|
::= { hzCpSnmpNotifications 52 }
|
|
|
|
hzCpRedundancyOperatingInForcedSwitch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy operating in either forced-active or forced-standby switch mode."
|
|
::= { hzCpSnmpNotifications 53 }
|
|
|
|
hzCpRedundancyOperatingInForcedSwitchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy operating in either forced-active or forced-standby switch mode condition is cleared."
|
|
::= { hzCpSnmpNotifications 54 }
|
|
|
|
hzCpRedundancyEnetCrossLink NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundnacy cross link."
|
|
::= { hzCpSnmpNotifications 55 }
|
|
|
|
hzCpRedundancyEnetCrossLinkCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy cross link is cleared."
|
|
::= { hzCpSnmpNotifications 56 }
|
|
|
|
hzCpRedundancyActiveUsingPartnerWLink NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Node is active but using its standby partner's radio to transport the data to the other end f the link. This alarm is raised on the active node."
|
|
::= { hzCpSnmpNotifications 57 }
|
|
|
|
hzCpRedundancyActiveUsingPartnerWLinkCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Active node using partner wireless link condition is cleared."
|
|
::= { hzCpSnmpNotifications 58 }
|
|
|
|
hzCpRedundancyStandbyWLinkInUse NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This alarm is raised on the standby node (primary or secondary) when it's radio is used by the partner node for transporting the data to the other end of the link."
|
|
::= { hzCpSnmpNotifications 59 }
|
|
|
|
hzCpRedundancyStandbyWLinkInUseCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Standby node wirless link is not used by the partner any more."
|
|
::= { hzCpSnmpNotifications 60 }
|
|
|
|
hzCpRedundancyStandbyOnPrimary NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary node is in standby mode."
|
|
::= { hzCpSnmpNotifications 61 }
|
|
|
|
hzCpRedundancyStandbyOnPrimaryCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary node in standby condition is cleared."
|
|
::= { hzCpSnmpNotifications 62 }
|
|
|
|
hzCpX2DeliveringHalfCapacity NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"X2 operation is using single wireless link. System throughput is reduced to half."
|
|
::= { hzCpSnmpNotifications 63 }
|
|
|
|
hzCpX2DeliveringHalfCapacityCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"X2 operation is back to two wireless links."
|
|
::= { hzCpSnmpNotifications 64 }
|
|
|
|
hzCpBncCableSignalNotDetected NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BNC signal is not detected. The cable may be disconnected."
|
|
::= { hzCpSnmpNotifications 65 }
|
|
|
|
hzCpBncCableSignalNotDetectedCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BNC signal error condition is cleared."
|
|
::= { hzCpSnmpNotifications 66 }
|
|
|
|
hzCpEthernetSpeedReduced NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
ifIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet Speed negotiated below the Max Speed."
|
|
::= { hzCpSnmpNotifications 67 }
|
|
|
|
hzCpEthernetSpeedReducedCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
ifIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet speed is set back to Max Speed."
|
|
::= { hzCpSnmpNotifications 68 }
|
|
|
|
hzCpSynceLostLock NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce clock PLL lost lock"
|
|
::= { hzCpSnmpNotifications 69 }
|
|
|
|
hzCpSynceLostLockCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce clock PLL restored from lost of lock"
|
|
::= { hzCpSnmpNotifications 70 }
|
|
|
|
hzCpSynceSecondarySourceInUse NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce clock selected secondary source"
|
|
::= { hzCpSnmpNotifications 71 }
|
|
|
|
hzCpSynceSecondarySourceInUseCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce clock selected primary source"
|
|
::= { hzCpSnmpNotifications 72 }
|
|
|
|
hzCpUserSession NOTIFICATION-TYPE
|
|
OBJECTS { hzCpUserSessionUserName,
|
|
hzCpUserSessionUserConnectionType,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A person has logged in to an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap."
|
|
::= { hzCpSnmpNotifications 73 }
|
|
|
|
hzCpUserSessionCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpUserSessionUserName,
|
|
hzCpUserSessionUserConnectionType,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap."
|
|
::= { hzCpSnmpNotifications 74 }
|
|
|
|
hzCpInvalidSystemConfig NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Overall system Configuration is not valid."
|
|
::= { hzCpSnmpNotifications 75 }
|
|
|
|
hzCpInvalidSystemConfigCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System configuration is valid."
|
|
::= { hzCpSnmpNotifications 76 }
|
|
|
|
hzCpMibChangeNotSaved NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mib has been changed but not saved."
|
|
::= { hzCpSnmpNotifications 77 }
|
|
|
|
hzCpMibChangeNotSavedCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mib has been saved."
|
|
::= { hzCpSnmpNotifications 78 }
|
|
|
|
hzCpTransmitterLossOfSync NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System has detected an internal fault."
|
|
::= { hzCpSnmpNotifications 79 }
|
|
|
|
hzCpTransmitterLossOfSyncCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal fault has cleared."
|
|
::= { hzCpSnmpNotifications 80 }
|
|
|
|
hzCpRadioLinearityCalError NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio linearity calibration error."
|
|
::= { hzCpSnmpNotifications 81 }
|
|
|
|
hzCpRadioLinearityCalErrorCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio linearity calibration error is cleared."
|
|
::= { hzCpSnmpNotifications 82 }
|
|
|
|
hzCpSynceConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce configuration mismatch with peer."
|
|
::= { hzCpSnmpNotifications 83 }
|
|
|
|
hzCpSynceConfigMismatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Synce configuration mismatch is cleared."
|
|
::= { hzCpSnmpNotifications 84 }
|
|
|
|
hzCpCryptoPowerUpTestsFailed NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Crypto power up tests failed."
|
|
::= { hzCpSnmpNotifications 85 }
|
|
|
|
hzCpCryptoConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Crypto configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer."
|
|
::= { hzCpSnmpNotifications 86 }
|
|
|
|
hzCpCryptoConfigMismatchCleared NOTIFICATION-TYPE
|
|
OBJECTS { hzCpAlarmConfigSeverity,
|
|
hzCpAlarmInstanceIndex,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Crypto configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer."
|
|
::= { hzCpSnmpNotifications 87 }
|
|
|
|
hzCpSystemTimeChange NOTIFICATION-TYPE
|
|
OBJECTS { hzCpDateAndTimeForLastTimeChange,
|
|
hzCpLastTimeChange,
|
|
horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System Date Time changed"
|
|
::= { hzCpSnmpNotifications 88 }
|
|
|
|
hzCpCodeCheck NOTIFICATION-TYPE
|
|
OBJECTS { horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A code check correction event has occured in the system."
|
|
::= { hzCpSnmpNotifications 89 }
|
|
|
|
hzCpConfigChanged NOTIFICATION-TYPE
|
|
OBJECTS { horizonEquipmentOutTrapsCounter }
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { hzCpSnmpNotifications 90 }
|
|
END
|
|
|
|
|