david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/ekinops/EKINOPS-MGNT2-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

4784 lines
132 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- MGNT2.TXT: MIB
--
--MIB Part Number:3MI01002CABA
--MIB Version:01
--
-- Copyright (c) 2017 by Ekinops
-- All rights reserved.
--
-- *****************************************************************
EKINOPS-MGNT2-MIB DEFINITIONS ::= BEGIN
IMPORTS
ekinops,
EkiState,
EkiOnOff,
EkiProtocol,
EkiApiState,
EkiLoadGWSW,
EkiLoadState,
EkiLoadPermutMethod,
EkiSynchroMode,
EkiLoadPermutMode
FROM EKINOPS-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32,
IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
RowStatus
FROM SNMPv2-TC;
mgnt2 MODULE-IDENTITY
LAST-UPDATED "201701100000Z"
ORGANIZATION "Ekinops"
CONTACT-INFO
"Ekinops
3, rue Blaise Pascal
F-22300 Lannion / FRANCE
Tel : +33 (0)2 96 05 00 30
Fax : +33 (0)2 96 48 62 39
E-mail: support@ekinops.net"
DESCRIPTION
"MIB for Ekinops 360 management."
REVISION "200511240000Z"
DESCRIPTION
"Initial version."
REVISION "200601240000Z"
DESCRIPTION
"Add the ekicraft package table."
REVISION "200603100000Z"
DESCRIPTION
"Change Rack full to Rack Not Full"
REVISION "200605100000Z"
DESCRIPTION
"Gateways are managed by a table"
REVISION "200605230000Z"
DESCRIPTION
"Replace PBU by PM"
REVISION "200609280000Z"
DESCRIPTION
"CRAFT/LINUX Inventory Insertion"
REVISION "200612130000Z"
DESCRIPTION
"Plug-in inventory table insertion"
REVISION "200702090000Z"
DESCRIPTION
"Add Backpanel ,Fan inventory and error counters"
REVISION "200704240000Z"
DESCRIPTION
"Add detailed traps"
REVISION "200706190000Z"
DESCRIPTION
"Add ABS3 objects"
REVISION "200708270000Z"
DESCRIPTION
"Add Groups number in board table for pm1008dc"
REVISION "200711270000Z"
DESCRIPTION
"Update Ekinops Address,Helps on objects,Add Dcc management"
REVISION "200805200000Z"
DESCRIPTION
"Add syslog and ntp servers ip addresses"
REVISION "200806180000Z"
DESCRIPTION
"Add Inactivity Time out"
REVISION "200808180000Z"
DESCRIPTION
"Add Cli access, create a textual convention for DCC access.Add Craft Access"
REVISION "200810070000Z"
DESCRIPTION
"Invert code on DCC mode"
REVISION "200811190000Z"
DESCRIPTION
"Insert Chassis Ethernet Split"
REVISION "200901050000Z"
DESCRIPTION
"Insert Chassis Global Conf"
REVISION "200912150000Z"
DESCRIPTION
"Correction on traps"
REVISION "201001040000Z"
DESCRIPTION
"Insert CRIT/URG/NURG/Acknowledge"
REVISION "201002160000Z"
DESCRIPTION
"Add CondType and NMS parameters"
REVISION "201007160000Z"
DESCRIPTION
"Add perf management for the NMS"
REVISION "201010270000Z"
DESCRIPTION
"Add new filters for traps"
REVISION "201103170000Z"
DESCRIPTION
"Add new filters for traps"
REVISION "201104070000Z"
DESCRIPTION
"New mode on new ehternet input"
REVISION "201104130000Z"
DESCRIPTION
"Polling Manager fail insertion"
REVISION "201105270000Z"
DESCRIPTION
"Rajout AlarmType sur Extraction Fan"
REVISION "201106080000Z"
DESCRIPTION
"Rajout Cold Reset"
REVISION "201106300000Z"
DESCRIPTION
"PerfCapStatus new type"
REVISION "201109120000Z"
DESCRIPTION
"New data for Atom"
REVISION "201202080000Z"
DESCRIPTION
"PM labelling removal"
REVISION "201203190000Z"
DESCRIPTION
"Add mgnt2SubFunctionLabel for 100G"
REVISION "201207160000Z"
DESCRIPTION
"Minor cosmetic updates"
REVISION "201305280000Z"
DESCRIPTION
"RSTP configuration object"
REVISION "201305300000Z"
DESCRIPTION
"Dust filter insertion, CPU Temp warning"
REVISION "201308290000Z"
DESCRIPTION
"LLDP configuration object"
REVISION "201309040000Z"
DESCRIPTION
"MGNT Shutdown adding"
REVISION "201309110000Z"
DESCRIPTION
"Log file mode insertion"
REVISION "201311060000Z"
DESCRIPTION
"RADIUS objects"
REVISION "201407300000Z"
DESCRIPTION
"Node Controller objects"
REVISION "201409010000Z"
DESCRIPTION
"Probcause,AlarmType - NMS completion"
REVISION "201502110000Z"
DESCRIPTION
"HTTP configuration"
REVISION "201504010000Z"
DESCRIPTION
"Add bindings for Node Controller"
REVISION "201504140000Z"
DESCRIPTION
"RSTP Thresholds"
REVISION "201504140000Z"
DESCRIPTION
"Users privilege"
REVISION "201510090000Z"
DESCRIPTION
"Add in mgnt2SlotStatus"
REVISION "201511050000Z"
DESCRIPTION
"Appropriate Limits on SYNTAX of some OBJECT-TYPE "
REVISION "201605270000Z"
DESCRIPTION
"Add objects for fail login attemps"
REVISION "201606150000Z"
DESCRIPTION
"Removable Fan modules handling"
REVISION "201610120000Z"
DESCRIPTION
"Modification of numbering of the fans"
REVISION "201701100000Z"
DESCRIPTION
"FTP, TFTP enable disable"
::= { ekinops 7 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- TEXTUAL-CONVENTION
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
Mgnt2CliAccessValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different type of access by ethernet for the CLI"
SYNTAX INTEGER {
noCliByEthernet(0),
cliBySSH(1),
cliByTelnet(2)
}
Mgnt2CraftAccessValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "enables access to the CRAFT"
SYNTAX INTEGER {
noCraftAccess(0),
craftEnable(1),
craftEnableHttps(2)
}
Mgnt2DccAccessValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the Dcc access"
SYNTAX INTEGER {
mode1Slots2s4s6s8s10(0),
mode2Slots2s6s10s14s18(1)
}
Mgnt2TrapModeValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the trap generation"
SYNTAX INTEGER {
syntheticTrap(0),
detailedTrap(1),
nmsTrap(2)
}
Mgnt2AckMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes to acknowledge alarms"
SYNTAX INTEGER {
modeA(1),
modeB(2)
}
Mgnt2PerfResyncValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the trap generation"
SYNTAX INTEGER {
perfResyncIdle(1),
perfResyncSync(2),
perfResyncReady(3),
perfResyncDelete(4)
}
Mgnt2NetMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the network management"
SYNTAX INTEGER {
switch(1),
gateway(2)
}
Mgnt2MasterEthMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the Master"
SYNTAX INTEGER {
static(1),
dhcp(2)
}
Mgnt2SubnetEthMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the Subnet"
SYNTAX INTEGER {
static(1),
dhcp(2)
}
Mgnt2AuthTypeValues ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Various types of authentication processes"
SYNTAX INTEGER {
authLocal(0),
authRADIUS(1),
authLDAP(2)
}
Mgnt2LogFileMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "different modes for the log files"
SYNTAX INTEGER {
disabled (0),
linear(1),
rotary(2)
}
Mgnt2SlotStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Status of the slot"
SYNTAX INTEGER {
slotEmpty(0),
pmReady(1),
pmReset(2),
pmLoad(3),
pmPassive(4),
pmUnknown(5),
pmNotReady(6)
}
-- *****************************************************************
--
-- MGNT2 MIB root mapping
--
-- *****************************************************************
mgnt2SNMPAgentData OBJECT IDENTIFIER ::= { mgnt2 1 }
mgnt2Hardware OBJECT IDENTIFIER ::= { mgnt2 2}
mgnt2Traps OBJECT IDENTIFIER ::= { mgnt2 3}
mgnt2SoftwareManagement OBJECT IDENTIFIER ::= { mgnt2 4}
mgnt2ConfigManagement OBJECT IDENTIFIER ::= { mgnt2 5}
mgnt2RemoteInventory OBJECT IDENTIFIER ::= { mgnt2 6}
mgnt2ErrorCounters OBJECT IDENTIFIER ::= { mgnt2 7}
mgnt2Perf OBJECT IDENTIFIER ::= { mgnt2 8}
-- *****************************************************************
--
-- MGNT2 SNMP Agent informations
--
-- *****************************************************************
mgnt2IPmanagment OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 1 }
mgnt2GigmManagerIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmManagerIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Manager IP address Table."
::= { mgnt2IPmanagment 1 }
mgnt2GigmManagerIpAddressEntry OBJECT-TYPE
SYNTAX Mgnt2GigmManagerIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { mgnt2GigmManagerIpIndex }
::= { mgnt2GigmManagerIpAddressTable 1 }
Mgnt2GigmManagerIpAddressEntry ::= SEQUENCE {
mgnt2GigmManagerIpIndex Integer32,
mgnt2GigmManagerIpAddress IpAddress,
mgnt2GigmManagerIpAddressTableRowStatus RowStatus,
mgnt2GigmManagerTrapPort Integer32,
mgnt2GigmManagerEnableCtrl EkiOnOff,
mgnt2GigmManagerEnableConfig EkiOnOff,
mgnt2GigmManagerEnableEvent EkiOnOff,
mgnt2GigmManagerEnableAlarmCrit EkiOnOff,
mgnt2GigmManagerEnableAlarmMajor EkiOnOff,
mgnt2GigmManagerEnableAlarmMinor EkiOnOff,
mgnt2GigmManagerRegistrationTimeout Integer32,
mgnt2GigmManagerEnableAlarmWarning EkiOnOff,
mgnt2GigmManagerEnableAlarmIndeterminate EkiOnOff
}
mgnt2GigmManagerIpIndex OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the IP address of the manager"
::= { mgnt2GigmManagerIpAddressEntry 1 }
mgnt2GigmManagerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address of the manager:This OID defines the IP
address of the SNMP Manager attached to the Mgnt2"
::= { mgnt2GigmManagerIpAddressEntry 2 }
mgnt2GigmManagerIpAddressTableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row."
::= { mgnt2GigmManagerIpAddressEntry 3 }
mgnt2GigmManagerTrapPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Manager UDP port."
::= { mgnt2GigmManagerIpAddressEntry 4 }
mgnt2GigmManagerEnableCtrl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of Ctrl."
::= { mgnt2GigmManagerIpAddressEntry 5 }
mgnt2GigmManagerEnableConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of config."
::= { mgnt2GigmManagerIpAddressEntry 6 }
mgnt2GigmManagerEnableEvent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of event."
::= { mgnt2GigmManagerIpAddressEntry 7 }
mgnt2GigmManagerEnableAlarmCrit OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of crit alarm."
::= { mgnt2GigmManagerIpAddressEntry 8 }
mgnt2GigmManagerEnableAlarmMajor OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of major alarm."
::= { mgnt2GigmManagerIpAddressEntry 9 }
mgnt2GigmManagerEnableAlarmMinor OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of minor alarm."
::= { mgnt2GigmManagerIpAddressEntry 10 }
mgnt2GigmManagerRegistrationTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time-out for manager activities."
::= { mgnt2GigmManagerIpAddressEntry 11 }
mgnt2GigmManagerEnableAlarmWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of warning alarm."
::= { mgnt2GigmManagerIpAddressEntry 12 }
mgnt2GigmManagerEnableAlarmIndeterminate OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling trap of indeterminate alarm."
::= { mgnt2GigmManagerIpAddressEntry 13 }
mgnt2GigmBoardIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the Chassis:This OID defines the IP
address of the Mgnt2"
::= { mgnt2IPmanagment 2 }
mgnt2GigmIPAddresByDHCP OBJECT-TYPE
SYNTAX EkiState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address retrieved by DHCP:If enabled, the IP
address is retrieved by DHCP, in which case changes
take effect after a board reset. If disabled the
object, mgnt2GigmBoardIpAddress defines the address"
::= { mgnt2IPmanagment 3 }
mgnt2GigmNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Netmask for the board IP address:This OID defined
the IP Subnet mask of the Mgnt2"
::= { mgnt2IPmanagment 4 }
mgnt2GigmGatewayAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmGatewayAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Gateway IP address Table: This table contains all
the gateway IP addresses."
::= { mgnt2IPmanagment 5 }
mgnt2GigmGatewayAddressEntry OBJECT-TYPE
SYNTAX Mgnt2GigmGatewayAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { mgnt2GigmGatewayIndex }
::= { mgnt2GigmGatewayAddressTable 1 }
Mgnt2GigmGatewayAddressEntry ::= SEQUENCE {
mgnt2GigmGatewayIndex Integer32,
mgnt2GigmGatewayAddress IpAddress,
mgnt2GigmGatewayOrder Integer32
}
mgnt2GigmGatewayIndex OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the IP address of the gateway"
::= { mgnt2GigmGatewayAddressEntry 1 }
mgnt2GigmGatewayAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address of the gateway :This OID defines the IP
address of the gateway attached to the Chassis"
::= { mgnt2GigmGatewayAddressEntry 2 }
mgnt2GigmGatewayOrder OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Gateway priority: This OID defines the priority of
the gateway (lower number for higher priority)"
::= { mgnt2GigmGatewayAddressEntry 3 }
mgnt2GigmSyslog OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the syslog server:This OID defines
the IP address of the syslog of the Mgnt2"
::= { mgnt2IPmanagment 6 }
mgnt2GigmNtpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the ntp server:This OID defines
the IP address of the ntp server for the Mgnt2"
::= { mgnt2IPmanagment 7 }
mgnt2GigmNodeIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Node IP address :This OID defines
the Node IP address in node controller mode for the Mgnt2"
::= { mgnt2IPmanagment 8 }
mgnt2ModulesManagement OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 2 }
mgnt2GigmBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of PMs plugged in the Chassis"
::= { mgnt2ModulesManagement 1 }
mgnt2GigmBoardEntry OBJECT-TYPE
SYNTAX Mgnt2GigmBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row Definition for the PMs table"
INDEX { mgnt2IndexBoards }
::= { mgnt2GigmBoardTable 1 }
Mgnt2GigmBoardEntry ::=
SEQUENCE {
mgnt2IndexBoards
Integer32,
mgnt2Position
Integer32,
mgnt2Name
DisplayString,
mgnt2PortNumber
Integer32,
mgnt2LineNumber
Integer32,
mgnt2GroupNumber
Integer32,
mgnt2RootOIDInventory
OBJECT IDENTIFIER,
mgnt2SlotOcc
DisplayString,
mgnt2SubFunctionLabel
DisplayString,
mgnt2SlotStatus
Mgnt2SlotStatus
}
mgnt2IndexBoards OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for PMs table"
::= { mgnt2GigmBoardEntry 1 }
mgnt2Position OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PM Slot number:This OID gives the slot number in
which the PM is plugged"
::= { mgnt2GigmBoardEntry 2 }
mgnt2Name OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PM name:This OID gives the name of the PM plugged
in the Mgnt2"
::= { mgnt2GigmBoardEntry 3 }
mgnt2PortNumber OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Client Ports:This OID gives the number of
client ports on the PM plugged in the Mgnt2"
::= { mgnt2GigmBoardEntry 4 }
mgnt2LineNumber OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Line Ports:This OID gives the number of line
ports on the PM plugged in the Mgnt2"
::= { mgnt2GigmBoardEntry 5 }
mgnt2GroupNumber OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Groups:This OID gives the number of group
of clients on the PM plugged in the Mgnt2"
::= { mgnt2GigmBoardEntry 6 }
mgnt2RootOIDInventory OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"root oid of the inventory leaf of the corresponding PM"
::= { mgnt2GigmBoardEntry 7 }
mgnt2SlotOcc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PM Slot occupied:This OID gives the slots taken
by this PM"
::= { mgnt2GigmBoardEntry 8 }
mgnt2SubFunctionLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sub Function Label: This OID gives the name of the sub
function embedded on the Chassis. (applied only on the
100G Chassis)"
::= { mgnt2GigmBoardEntry 9 }
mgnt2SlotStatus OBJECT-TYPE
SYNTAX Mgnt2SlotStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot Status: This OID gives the status of the slot
in the Chassis: See Textual COnvention"
::= { mgnt2GigmBoardEntry 10 }
mgnt2GigmSelectedBoard OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PM Slot number selected:PM selected for further
operations in the Ekinops module board tree. This
number is the slot number."
::= { mgnt2ModulesManagement 7 }
mgnt2GigmMibsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmMibsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"List of MIBs supported by the Chassis SNMPAgent"
::= { mgnt2SNMPAgentData 4 }
mgnt2GigmMibsEntry OBJECT-TYPE
SYNTAX Mgnt2GigmMibsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row definition for MIBs table"
INDEX { mgnt2IndexMibs }
::= { mgnt2GigmMibsTable 1 }
Mgnt2GigmMibsEntry ::=
SEQUENCE {
mgnt2IndexMibs
Integer32,
mgnt2MibName
DisplayString,
mgnt2MibPartNumber
DisplayString
}
mgnt2IndexMibs OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Index for MIBs table"
::= { mgnt2GigmMibsEntry 1 }
mgnt2MibName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"MIB name:This OID gives the name of the MIBs
supported by the SNMP Agent"
::= { mgnt2GigmMibsEntry 2 }
mgnt2MibPartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"MIB Part Number:This OID gives the part number of the MIBs
supported by the SNMP Agent"
::= { mgnt2GigmMibsEntry 3 }
mgnt2GigmLogicalName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mgnt2 name:This OID defines the name of the Mgnt2"
::= { mgnt2SNMPAgentData 5 }
mgnt2GigmEqptType OBJECT-TYPE
SYNTAX Integer32(1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipment type:This OID defines the type of the Equipment"
::= { mgnt2SNMPAgentData 6 }
mgnt2GigmTrapCount OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 7 }
mgnt2GigmTrapCounter OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap counter:This OID counts the number of trap sent"
::= { mgnt2GigmTrapCount 1 }
mgnt2GigmResetTrapCounter OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset trap counter:This OID reset the trap counter to 0"
::= { mgnt2GigmTrapCount 2 }
mgnt2GigmSecurity OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 8 }
mgnt2GigmRoCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Get community:This OID defines the community for the
SNMP Get function"
::= { mgnt2GigmSecurity 1 }
mgnt2GigmRwCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Set community:This OID defines the community for the
SNMP Set function"
::= { mgnt2GigmSecurity 2 }
mgnt2GigmTrapCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Trap community:This OID defines the community for the
SNMP Trap function"
::= { mgnt2GigmSecurity 3 }
mgnt2GigmTime OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 9 }
mgnt2GigmCurrentHour OBJECT-TYPE
SYNTAX INTEGER(0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Hour time:This OID defines the hour of the chassis' time"
::= { mgnt2GigmTime 1 }
mgnt2GigmCurrentMinute OBJECT-TYPE
SYNTAX INTEGER(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Minute time:This OID defines the minute of the chassis' time"
::= { mgnt2GigmTime 2 }
mgnt2GigmCurrentYear OBJECT-TYPE
SYNTAX INTEGER(1970..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis year date:This OID defines the year of the chassis' date"
::= { mgnt2GigmTime 3 }
mgnt2GigmCurrentMonth OBJECT-TYPE
SYNTAX INTEGER(1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis month date:This OID defines the month of the chassis' date"
::= { mgnt2GigmTime 4 }
mgnt2GigmCurrentDay OBJECT-TYPE
SYNTAX INTEGER(1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis day date:This OID defines the day of the chassis' date"
::= { mgnt2GigmTime 5 }
mgnt2Authentication OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 10 }
mgnt2GigmRadiusServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the RADIUS server:This OID defines
the IP address of the external RADIUS server for authentication"
::= { mgnt2Authentication 1 }
mgnt2GigmRadiusPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TCP port number of the RADIUS server:This OID defines
the TCP port number of the external RADIUS server for
authentication"
::= { mgnt2Authentication 2 }
mgnt2GigmRadiusSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret of the RADIUS server:This OID defines
the shared secret password of the RADIUS server for
authentication"
::= { mgnt2Authentication 3 }
mgnt2GigmLdapHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"IP address of the LDAP host:This OID defines
the IP address of the external LDAP server for authentication"
::= { mgnt2Authentication 4 }
mgnt2GigmLdapPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"TCP port number of the LDAP server:This OID defines
the TCP port number of the external LDAP server for
authentication"
::= { mgnt2Authentication 5 }
mgnt2GigmLdapBase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"LDAP base:This OID defines the name of the search
base of the LDAP server for
authentication<Help>LDAP base name spelled as follows:
'ou=users,ou=network,dc=yourcompany,dc=net'"
::= { mgnt2Authentication 6 }
mgnt2GigmLdapVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Protocol number in use by the LDAP server:This OID defines
the protocol version used by the external LDAP server for
authentication<Help>Protocol version used by the external LDAP
server for authentication"
::= { mgnt2Authentication 7 }
mgnt2GigmLdapBindDn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"LDAP Bind DN:This OID defines the login name used to connect
into the LDAP server base for
authentication<Help>LDAP binddn spelled as follows:
'cn=ldap_admin,dc=yourcompany,dc=net'"
::= { mgnt2Authentication 8 }
mgnt2GigmLdapBindPw OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Credentials to bind the LDAP server with:This OID defines
the credentials to bind the LDAP server with for
authentication<Help>Credentials for LDAP access (bindpw)"
::= { mgnt2Authentication 9 }
mgnt2GigmLdapScope OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Scope for LDAP base search:This OID defines
the search scope for an LDAP base search
<Help>LDAP search scope"
::= { mgnt2Authentication 10 }
mgnt2GigmLdapPamPasswd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PAM password handling:This OID defines
the way the PAM password is handled for LDAP authentication
<Help>The 'pam_password' option sould be one of the following:
'clear', 'crypt', 'md5', 'racf', 'exop'"
::= { mgnt2Authentication 11 }
mgnt2GigmAuthenticationType OBJECT-TYPE
SYNTAX Mgnt2AuthTypeValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication type in use"
::= { mgnt2Authentication 12 }
-- *****************************************************************
--
-- MGNT2 Software Management tables
--
-- *****************************************************************
mgnt2DwlUploadingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2DwlUploadingEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SNMP Agent SW packages in ram: List of the SNMP
agent software packages available in /ram for
download on the Chassis managment module flash"
::= { mgnt2SoftwareManagement 1 }
mgnt2DwlUploadingEntry OBJECT-TYPE
SYNTAX Mgnt2DwlUploadingEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the package uploading table"
INDEX { mgnt2IndexUpload }
::= { mgnt2DwlUploadingTable 1 }
Mgnt2DwlUploadingEntry::=
SEQUENCE {
mgnt2IndexUpload
Integer32,
mgnt2DwlUploadFileName
DisplayString,
mgnt2ImmediateReplacement
EkiState,
mgnt2FileUpload
EkiOnOff,
mgnt2DeletePackageFromRam
EkiOnOff,
mgnt2FlashingInProgress
EkiOnOff
}
mgnt2IndexUpload OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index for uploading table"
::= { mgnt2DwlUploadingEntry 1 }
mgnt2DwlUploadFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Package filename in RAM:This OID gives the name of
the SNMP agent software packages in RAM"
::= { mgnt2DwlUploadingEntry 2 }
mgnt2ImmediateReplacement OBJECT-TYPE
SYNTAX EkiState
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Immediat Agent Replacement:This OID indicates to
switch to selected SNMP agent immediately or after
reset of the MGNT2"
::= { mgnt2DwlUploadingEntry 3 }
mgnt2FileUpload OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Agent File Upload:This OID validates the upload of
the SNMP agent from RAM to FLASH"
::= { mgnt2DwlUploadingEntry 4 }
mgnt2DeletePackageFromRam OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Delete Package from RAM:This OID requests to delete
the SNMP Agent SW package from RAM"
::= { mgnt2DwlUploadingEntry 5 }
mgnt2FlashingInProgress OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Flashing in Progress:This OID indicates whether there
is a file upload to FLASH in progress"
::= { mgnt2DwlUploadingEntry 6 }
mgnt2DwlPackageTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2DwlPackageEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of SNMP agent software packages
present in flash memory"
::= { mgnt2SoftwareManagement 2 }
mgnt2DwlPackageEntry OBJECT-TYPE
SYNTAX Mgnt2DwlPackageEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the package management table"
INDEX { mgnt2IndexPackage }
::= { mgnt2DwlPackageTable 1 }
Mgnt2DwlPackageEntry::=
SEQUENCE {
mgnt2IndexPackage
Integer32,
mgnt2DwlPackageFileName
DisplayString,
mgnt2ExtractedPack
EkiOnOff,
mgnt2SwitchTo
EkiOnOff,
mgnt2Immediate
EkiOnOff,
mgnt2DeletePackageFromFlash
EkiOnOff,
mgnt2PackageExtractionInProgress
EkiOnOff
}
mgnt2IndexPackage OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index for package management table"
::= { mgnt2DwlPackageEntry 1 }
mgnt2DwlPackageFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Package File name in FLASH:This OID gives the name
of the SNMP agent software package in FLASH"
::= { mgnt2DwlPackageEntry 2 }
mgnt2ExtractedPack OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Extracted SNMP agent software pack.: Indicates
whether the package is currently extracted in the FLASH.
If it is, it must not be deleted"
::= { mgnt2DwlPackageEntry 3 }
mgnt2SwitchTo OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Switch to package:This OID activates the SNMP Agent
Software package"
::= { mgnt2DwlPackageEntry 4 }
mgnt2Immediate OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Immediate SNMP agent activation: This OID indicates
whether the package is scheduled for immediate
activation or activation will take place following the
next reset"
::= { mgnt2DwlPackageEntry 5 }
mgnt2DeletePackageFromFlash OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Delete package from FLASH:This OID deletes the SNMP
agent software package from the FLASH"
::= { mgnt2DwlPackageEntry 6 }
mgnt2PackageExtractionInProgress OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Package extraction in progress:This OID indicates that
a SNMP agent software activation is in progress"
::= { mgnt2DwlPackageEntry 7 }
mgnt2DwlUploadingTableUpdate OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Uploading Table update:This OID updates the contents of
the uploading table"
::= { mgnt2SoftwareManagement 3 }
mgnt2LoadPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2LoadPMEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of the PM module software files (GW/SW)
present on the repository"
::= { mgnt2SoftwareManagement 4 }
mgnt2LoadPMEntry OBJECT-TYPE
SYNTAX Mgnt2LoadPMEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the LOAD article table"
INDEX { mgnt2LoadPMIndex }
::= { mgnt2LoadPMTable 1 }
Mgnt2LoadPMEntry::=
SEQUENCE {
mgnt2LoadPMIndex
Integer32,
mgnt2LoadFileName
DisplayString,
mgnt2LoadFileType
EkiLoadGWSW,
mgnt2LoadState
EkiLoadState,
mgnt2LoadModuleNumber
Integer32,
mgnt2LoadResetMethod
EkiLoadPermutMethod,
mgnt2LoadResetMode
EkiLoadPermutMode,
mgnt2LoadBankNumber
Integer32,
mgnt2LoadDownloadProgress
Integer32,
mgnt2LoadTransfer
EkiOnOff,
mgnt2LoadDelete
EkiOnOff
}
mgnt2LoadPMIndex OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index for Load article table"
::= { mgnt2LoadPMEntry 1 }
mgnt2LoadFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"PM Upgrade filename:This OID gives the name of
the file"
::= { mgnt2LoadPMEntry 2 }
mgnt2LoadFileType OBJECT-TYPE
SYNTAX EkiLoadGWSW
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"PM upgrade file type:This OID gives the type of
file (gateware or software)"
::= { mgnt2LoadPMEntry 3 }
mgnt2LoadState OBJECT-TYPE
SYNTAX EkiLoadState
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"PM upgrade status:This OID gives the status of the
selected Load file"
::= { mgnt2LoadPMEntry 4 }
mgnt2LoadModuleNumber OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM ugprade target:This OID defines the slot number
of the PM to upgrade"
::= { mgnt2LoadPMEntry 5 }
mgnt2LoadResetMethod OBJECT-TYPE
SYNTAX EkiLoadPermutMethod
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM upgrade reset method:This OID defines the reset
method (manual, immediate or scheduled)"
::= { mgnt2LoadPMEntry 6 }
mgnt2LoadResetMode OBJECT-TYPE
SYNTAX EkiLoadPermutMode
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM upgrade reset mode:This OID defines the type of
reset (cold or warm)"
::= { mgnt2LoadPMEntry 7 }
mgnt2LoadBankNumber OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM upgrade bank number:This OID defines the target
bank number in the PM's flash"
::= { mgnt2LoadPMEntry 8 }
mgnt2LoadDownloadProgress OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"PM upgrade progress:This OID gives the upgrade
progress (percentage)"
::= { mgnt2LoadPMEntry 9 }
mgnt2LoadTransfer OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM upgrade transfer:This OID launchs the transfer
of the associated file to the selected PM's flash"
::= { mgnt2LoadPMEntry 10 }
mgnt2LoadDelete OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"PM upgrade delete file:This OID deletes the
associated file from the RAM of the management board"
::= { mgnt2LoadPMEntry 11 }
mgnt2LoadPMTableUpdate OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Load PM Table update:This OID updates the contents
of the Load table"
::= { mgnt2SoftwareManagement 5 }
mgnt2DwlEkicraftPkgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2DwlEkicraftPkgEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of Ekicraft software packages
present in flash memory"
::= { mgnt2SoftwareManagement 6 }
mgnt2DwlEkicraftPkgEntry OBJECT-TYPE
SYNTAX Mgnt2DwlEkicraftPkgEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the package management table"
INDEX { mgnt2IndexEkicraftPkg }
::= { mgnt2DwlEkicraftPkgTable 1 }
Mgnt2DwlEkicraftPkgEntry::=
SEQUENCE {
mgnt2IndexEkicraftPkg
Integer32,
mgnt2DwlEkicraftPkgFileName
DisplayString,
mgnt2DwlEkicraftExtractedPack
EkiOnOff,
mgnt2DwlEkicraftSwitchTo
EkiOnOff,
mgnt2DwlEkicraftImmediate
EkiOnOff,
mgnt2DeleteEkicraftPkgFromFlash
EkiOnOff,
mgnt2EkicraftPkgExtractionInProgress
EkiOnOff
}
mgnt2IndexEkicraftPkg OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index for Ekicraft package management table"
::= { mgnt2DwlEkicraftPkgEntry 1 }
mgnt2DwlEkicraftPkgFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Package File name in FLASH:This OID gives the name
of the Ekicraft software package in FLASH"
::= { mgnt2DwlEkicraftPkgEntry 2 }
mgnt2DwlEkicraftExtractedPack OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Extracted Ekicraft software pack.: Indicates
whether the package is currently extracted in the FLASH.
If it is, it must not be deleted"
::= { mgnt2DwlEkicraftPkgEntry 3 }
mgnt2DwlEkicraftSwitchTo OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Switch to package:This OID activates the Ekicraft
Software package"
::= { mgnt2DwlEkicraftPkgEntry 4 }
mgnt2DwlEkicraftImmediate OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Immediate Ekicraft activation: This OID indicates
whether the package is scheduled for immediate
activation or activation will take place following the
next reset"
::= { mgnt2DwlEkicraftPkgEntry 5 }
mgnt2DeleteEkicraftPkgFromFlash OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Delete package from FLASH:This OID deletes the Ekicraft
software package from the FLASH"
::= { mgnt2DwlEkicraftPkgEntry 6 }
mgnt2EkicraftPkgExtractionInProgress OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Package extraction in progress:This OID indicates that
an Ekicraft activation is in progress"
::= { mgnt2DwlEkicraftPkgEntry 7 }
-- *****************************************************************
--
-- Config management tables
--
-- *****************************************************************
mgnt2CnfUploadConfigFilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2CnfUploadConfigFilesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of configuration files uploaded to RAM"
::= { mgnt2ConfigManagement 1 }
mgnt2CnfUploadConfigFilesEntry OBJECT-TYPE
SYNTAX Mgnt2CnfUploadConfigFilesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the package uploading table"
INDEX { mgnt2CnfUploadConfigIndex }
::= { mgnt2CnfUploadConfigFilesTable 1 }
Mgnt2CnfUploadConfigFilesEntry::=
SEQUENCE {
mgnt2CnfUploadConfigIndex
Integer32,
mgnt2CnfConfigFileName
DisplayString,
mgnt2CnfConfigSlot
Integer32,
mgnt2CnfConfigUpload
EkiOnOff,
mgnt2CnfDeleteConfigFile
EkiOnOff
}
mgnt2CnfUploadConfigIndex OBJECT-TYPE
SYNTAX Integer32(0..16)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index of config files"
::= { mgnt2CnfUploadConfigFilesEntry 1 }
mgnt2CnfConfigFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Configuration filename in RAM:This OID gives the
name of the configuration file in RAM"
::= { mgnt2CnfUploadConfigFilesEntry 2 }
mgnt2CnfConfigSlot OBJECT-TYPE
SYNTAX Integer32(0..3)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration target:This OID defines the target
slot number for the configuration file"
::= { mgnt2CnfUploadConfigFilesEntry 3 }
mgnt2CnfConfigUpload OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration Upload:This OID uploads the
configuration file to the specified slot number
in the PM FLASH"
::= { mgnt2CnfUploadConfigFilesEntry 4 }
mgnt2CnfDeleteConfigFile OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration delete from RAM:This OID deletes the
configuration file from RAM"
::= { mgnt2CnfUploadConfigFilesEntry 5 }
mgnt2CnfManageConfigFilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2CnfManageConfigFilesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of configuration files uploaded to RAM"
::= { mgnt2ConfigManagement 2 }
mgnt2CnfManageConfigFilesEntry OBJECT-TYPE
SYNTAX Mgnt2CnfManageConfigFilesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Row definition for the package uploading table"
INDEX { mgnt2CnfManageConfigIndex }
::= { mgnt2CnfManageConfigFilesTable 1 }
Mgnt2CnfManageConfigFilesEntry::=
SEQUENCE {
mgnt2CnfManageConfigIndex
Integer32,
mgnt2CnfManageConfigFileID
DisplayString,
mgnt2CnfManageConfigFileName
DisplayString,
mgnt2CnfModuleSlotNumber
Integer32,
mgnt2CnfBackupConfig
EkiOnOff,
mgnt2CnfRestoreConfig
EkiOnOff,
mgnt2CnfExportConfig
EkiOnOff,
mgnt2CnfDeleteConfig
EkiOnOff
}
mgnt2CnfManageConfigIndex OBJECT-TYPE
SYNTAX Integer32(0..16)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index of config file slots"
::= { mgnt2CnfManageConfigFilesEntry 1 }
mgnt2CnfManageConfigFileID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration file ID in FLASH:This OID gives the
ID of the configuration file in MGNT2 FLASH"
::= { mgnt2CnfManageConfigFilesEntry 2 }
mgnt2CnfManageConfigFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration file name in FLASH:This OID gives the
name of the configuration file in MGNT2 FLASH"
::= { mgnt2CnfManageConfigFilesEntry 3 }
mgnt2CnfModuleSlotNumber OBJECT-TYPE
SYNTAX Integer32(3..6)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration target:This OID defines the target
module slot number for the configuration file"
::= { mgnt2CnfManageConfigFilesEntry 4 }
mgnt2CnfBackupConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration backup:This OID backups the
configuration of the specified module to the
selected file in MGNT2 FLASH"
::= { mgnt2CnfManageConfigFilesEntry 5 }
mgnt2CnfRestoreConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration Restore:This OID restores the
configuration of the specified module from the
selected file in MGNT2 FLASH"
::= { mgnt2CnfManageConfigFilesEntry 6 }
mgnt2CnfExportConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration Export:This OID exports the selected
file in MGNT2 FLASH to a file in RAM"
::= { mgnt2CnfManageConfigFilesEntry 7 }
mgnt2CnfDeleteConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Configuration delete from FLASH:This OID deletes the
configuration file from the MGNT2 FLASH"
::= { mgnt2CnfManageConfigFilesEntry 8 }
-- *****************************************************************
--
-- MGNT2 Remote inventory
--
-- *****************************************************************
mgnt2RinvHwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Hardware inventory:This OID gives the
Hardware inventory of the Mgnt2 management module"
::= { mgnt2RemoteInventory 1 }
mgnt2RinvSoftwarePackage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Software package inventory:this OID gives
the Software package inventory of the Mgnt2
management module"
::= { mgnt2RemoteInventory 2 }
mgnt2RinvGateware OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Gateware inventory:This OID gives the
gateware inventory of the Mgnt2 management module"
::= { mgnt2RemoteInventory 3 }
mgnt2RinvAgent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Software inventory:This OID gives the
software inventory of the Mgnt2 management module"
::= { mgnt2RemoteInventory 4 }
mgnt2RinvCraft OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Craft inventory:This OID gives the
craft inventory of the Mgnt2 management module"
::= { mgnt2RemoteInventory 5 }
mgnt2RinvLinux OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chassis Linux inventory:This OID gives the
linux inventory of the Mgnt2 management module"
::= { mgnt2RemoteInventory 6 }
EkiPlugInState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Plug-in state"
SYNTAX INTEGER {
absent(0),
loaded(1),
versionError(2),
symbolError(3)
}
mgnt2GigmPlugInTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmPlugInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Plug-ins present"
::= { mgnt2RemoteInventory 7 }
mgnt2GigmPlugInEntry OBJECT-TYPE
SYNTAX Mgnt2GigmPlugInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row Definition for the Plug-ins table"
INDEX { mgnt2IndexPlugIns }
::= { mgnt2GigmPlugInTable 1 }
Mgnt2GigmPlugInEntry ::=
SEQUENCE {
mgnt2IndexPlugIns
Integer32,
mgnt2PlugInRinv
DisplayString,
mgnt2PollingPresent
EkiPlugInState,
mgnt2SnmpPresent
EkiPlugInState
}
mgnt2IndexPlugIns OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for PMs table"
::= { mgnt2GigmPlugInEntry 1 }
mgnt2PlugInRinv OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Plug-in RI:This OID gives the remote inventory of the plug-in"
::= { mgnt2GigmPlugInEntry 2 }
mgnt2PollingPresent OBJECT-TYPE
SYNTAX EkiPlugInState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polling present:This OID gives the presence of the polling plug-in"
::= { mgnt2GigmPlugInEntry 3 }
mgnt2SnmpPresent OBJECT-TYPE
SYNTAX EkiPlugInState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp present:This OID gives the presence of the snmp plug-in"
::= { mgnt2GigmPlugInEntry 4 }
mgnt2RinvBackpanel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Backpanel inventory:This OID gives the
Backpanel inventory of the chassis"
::= { mgnt2RemoteInventory 8 }
mgnt2RinvFan OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fan inventory:This OID gives the
fan inventory of the chassis"
::= { mgnt2RemoteInventory 9 }
mgnt2RinvUboot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"U-Boot inventory:This OID gives the
U-Boot inventory"
::= { mgnt2RemoteInventory 10 }
-- *****************************************************************
--
-- MGNT2 Error counters
--
-- *****************************************************************
mgnt2GigmErrorCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2GigmErrorCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of error counters"
::= { mgnt2ErrorCounters 1 }
mgnt2GigmErrorCounterEntry OBJECT-TYPE
SYNTAX Mgnt2GigmErrorCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row Definition for the error counters table"
INDEX { mgnt2IndexErrorCounter }
::= { mgnt2GigmErrorCounterTable 1 }
Mgnt2GigmErrorCounterEntry ::=
SEQUENCE {
mgnt2IndexErrorCounter
Integer32,
mgnt2ErrorCounterSlotNumber
Integer32,
mgnt2ErrorCounterValue
Integer32
}
mgnt2IndexErrorCounter OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for error counters table"
::= { mgnt2GigmErrorCounterEntry 1 }
mgnt2ErrorCounterSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number:This OID gives the slot number for the corresponding counter"
::= { mgnt2GigmErrorCounterEntry 2 }
mgnt2ErrorCounterValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count value:This OID gives the value of the error counter"
::= { mgnt2GigmErrorCounterEntry 3 }
mgnt2GigmResetErrorCounters OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset error counters:This OID reset the error counters to 0"
::= { mgnt2ErrorCounters 2 }
-- *****************************************************************
--
-- MGNT2 Perf objects
--
-- *****************************************************************
mgnt2PerfCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF Mgnt2PerfCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Perf capability of PMs plugged in the Chassis"
::= { mgnt2Perf 1 }
mgnt2PerfCapabilityEntry OBJECT-TYPE
SYNTAX Mgnt2PerfCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row Definition for the Perf capability table"
INDEX { mgnt2PerfCapIndexBoards }
::= { mgnt2PerfCapabilityTable 1 }
Mgnt2PerfCapabilityEntry ::=
SEQUENCE {
mgnt2PerfCapIndexBoards
Integer32,
mgnt2PerfCapPosition
Integer32,
mgnt2PerfCapName
DisplayString,
mgnt2PerfCapStatus
EkiOnOff,
mgnt2PerfCapOidEnable
OBJECT IDENTIFIER
}
mgnt2PerfCapIndexBoards OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for Perf cap table"
::= { mgnt2PerfCapabilityEntry 1 }
mgnt2PerfCapPosition OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PM Slot number:This OID gives the slot number in
which the PM is plugged"
::= { mgnt2PerfCapabilityEntry 2 }
mgnt2PerfCapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PM name:This OID gives the name of the PM plugged
in the Mgnt2"
::= { mgnt2PerfCapabilityEntry 3 }
mgnt2PerfCapStatus OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the perf cap:This OID gives the capability
of the pm to do performance"
::= { mgnt2PerfCapabilityEntry 4 }
mgnt2PerfCapOidEnable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OID of the object perf enable:This OID gives the OID of
the perf enable object of the correspondind mib of the module"
::= { mgnt2PerfCapabilityEntry 5 }
mgnt2GigmPerf15minSync OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"15 min sync perf : this oid send a 15min sync to all modules"
::= { mgnt2Perf 2 }
mgnt2GigmPerf24hSync OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"15 min sync perf : this oid send a 24h sync to all modules"
::= { mgnt2Perf 3 }
mgnt2PerfResyncNMS OBJECT-TYPE
SYNTAX Mgnt2PerfResyncValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Resync Perf : this oid allows to create an historical perf file for all modules"
::= { mgnt2Perf 4 }
-- *****************************************************************
--
-- MGNT2 Board management
--
-- *****************************************************************
mgnt2alarms OBJECT IDENTIFIER ::= { mgnt2Hardware 1}
mgnt2controls OBJECT IDENTIFIER ::= { mgnt2Hardware 2}
mgnt2config OBJECT IDENTIFIER ::= { mgnt2Hardware 3}
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- ALARMS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synthAlm0 article
--- *****************************************************
mgnt2AlmsynthAlm0 OBJECT IDENTIFIER ::= { mgnt2alarms 0 }
mgnt2AlmMgntDefFuseB OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mgnt Fuse B Fail :This OID indicates
that the fuse of the power input
B is in fail condition on the Management
board <Help> Status of the MGNT
Fuse B <Condtype> MGNT_DEF_FUSE_B
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 16 }
mgnt2AlmMgntDefFuseA OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mgnt Fuse A Fail :This OID indicates
that the fuse of the power input
A is in fail condition on the Management
board <Help> Status of the MGNT
Fuse A <Condtype> MGNT_DEF_FUSE_A
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 15 }
mgnt2AlmDef48b OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input B Present :This OID
indicates that there is not input
power on the right power connector
(B) <Help> This alarm indicates
if the power input B is present
(right power connector) <Condtype>
DEF_48B <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 12 }
mgnt2AlmDef48a OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Power Input A Present :This OID
indicates that there is not input
power on the right power connector
(A) <Help> This alarm indicates
if the power input B is present
(left power connector) <Condtype>
DEF_48A <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 11 }
mgnt2AlmFansFailure OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Chassis Fan Module Failure :This
OID indicates that at least one
of the three FAN unit of the FAN
module is in fail condition <Condtype>
FANS_FAILURE <Probcause> other(1)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 10 }
mgnt2AlmAbsFailure OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Chassis Management Module Failure
:This OID indicates that the Chassis
Management module is in fail condition
<Condtype> ABS_FAILURE <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmsynthAlm0 9 }
--- *****************************************************
--- LEAF for the synthAlm1 article
--- *****************************************************
mgnt2AlmsynthAlm1 OBJECT IDENTIFIER ::= { mgnt2alarms 1 }
mgnt2AlmAcknowledge OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Alarm Ack. :This OID indicates
the alarms have been acknowledged
by the user (locally or remotely)
<Help> This status indicates
the alarms have been acknowledged
by the user (locally or remotely)
<Condtype> ACKNOWLEDGE <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmsynthAlm1 16 }
mgnt2AlmCritVisual OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Critical Chassis Alarm :This OID
indicates at least one Critical
alarm is active on the complete
chassis (including TR-FAN, MGNT
and PM) <Help> This alarm indicates
at least one Critical alarm is
active on the complete chassis
(including TR-FAN, MGNT and PM)
<Condtype> CRIT_VISUAL <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmsynthAlm1 3 }
mgnt2AlmUrgVisual OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Major Chassis Alarm :This OID
indicates at least one Major alarm
is active on the complete chassis
(including TR-FAN, MGNT and PM)
<Help> This alarm indicates
at least one Major alarm is active
on the complete chassis (including
TR-FAN, MGNT and PM) <Condtype>
URG_VISUAL <Probcause> other(1)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { mgnt2AlmsynthAlm1 2 }
mgnt2AlmNurgVisual OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Minor Chassis Alarm :This OID
indicates at least one Minor alarm
is active on the complete chassis
(including TR-FAN, MGNT and PM)
<Help> This alarm indicates at
least one Minor alarm is active
on the complete chassis (including
TR-FAN, MGNT and PM) <Condtype>
NURG_VISUAL <Probcause> other(1)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { mgnt2AlmsynthAlm1 1 }
--- *****************************************************
--- LEAF for the boardMgmntSet1 article
--- *****************************************************
mgnt2AlmboardMgmntSet1 OBJECT IDENTIFIER ::= { mgnt2alarms 16 }
mgnt2AlmPmFanAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN module present in Chassis
:This OID indicates the presence
of the FAN module in the Chassis.
<Help> This alarm indicates if
the FAN module is detected in the
chassis. <Condtype> PM_FAN_ABSENT
<Probcause> other(1) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { mgnt2AlmboardMgmntSet1 14 }
mgnt2AlmPmSlot11Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 11
:This OID indicates the presence
of a PM in Slot 11 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 11
<Condtype> PM_SLOT11_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 12 }
mgnt2AlmPmSlot10Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 10
:This OID indicates the presence
of a PM in Slot 10 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 10
<Condtype> PM_SLOT10_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 11 }
mgnt2AlmPmSlot9Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 9 :This
OID indicates the presence of a
PM in Slot 9 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 9
<Condtype> PM_SLOT9_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 10 }
mgnt2AlmPmSlot8Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 8 :This
OID indicates the presence of a
PM in Slot 8 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 8
<Condtype> PM_SLOT8_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 9 }
mgnt2AlmPmSlot7Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 7 :This
OID indicates the presence of a
PM in Slot 7 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 7
<Condtype> PM_SLOT7_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 8 }
mgnt2AlmPmSlot6Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 6 :This
OID indicates the presence of a
PM in Slot 6 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 6
<Condtype> PM_SLOT6_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 7 }
mgnt2AlmPmSlot5Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 5 :This
OID indicates the presence of a
PM in Slot 5 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 5
<Condtype> PM_SLOT5_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 6 }
mgnt2AlmPmSlot4Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 4 :This
OID indicates the presence of a
PM in Slot 4 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 4
<Condtype> PM_SLOT4_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 5 }
mgnt2AlmPmSlot3Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 3 :This
OID indicates the presence of a
PM in Slot 3 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 3
<Condtype> PM_SLOT3_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 4 }
mgnt2AlmPmSlot2Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 2 :This
OID indicates the presence of a
PM in Slot 2 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 2
<Condtype> PM_SLOT2_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 3 }
mgnt2AlmPmSlot1Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 1 :This
OID indicates the presence of a
PM in Slot 1 of the Chassis .
<Help> This status indicates
if a PM is detected in slot 1
<Condtype> PM_SLOT1_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet1 2 }
--- *****************************************************
--- LEAF for the boardMgmntSet2 article
--- *****************************************************
mgnt2AlmboardMgmntSet2 OBJECT IDENTIFIER ::= { mgnt2alarms 17 }
mgnt2AlmPmSlot20Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 20
:This OID indicates the presence
of a PM in Slot 20 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 20
<Condtype> PM_SLOT20_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 9 }
mgnt2AlmPmSlot19Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 19
:This OID indicates the presence
of a PM in Slot 19 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 19
<Condtype> PM_SLOT19_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 8 }
mgnt2AlmPmSlot18Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 18
:This OID indicates the presence
of a PM in Slot 18 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 18
<Condtype> PM_SLOT18_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 7 }
mgnt2AlmPmSlot17Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 17
:This OID indicates the presence
of a PM in Slot 17 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 17
<Condtype> PM_SLOT17_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 6 }
mgnt2AlmPmSlot16Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 16
:This OID indicates the presence
of a PM in Slot 16 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 16
<Condtype> PM_SLOT16_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 5 }
mgnt2AlmPmSlot15Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 15
:This OID indicates the presence
of a PM in Slot 15 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 15
<Condtype> PM_SLOT15_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 4 }
mgnt2AlmPmSlot14Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 14
:This OID indicates the presence
of a PM in Slot 14 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 14
<Condtype> PM_SLOT14_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 3 }
mgnt2AlmPmSlot13Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 13
:This OID indicates the presence
of a PM in Slot 13 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 13
<Condtype> PM_SLOT13_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 2 }
mgnt2AlmPmSlot12Absent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM present in Chassis slot 12
:This OID indicates the presence
of a PM in Slot 12 of the Chassis
. <Help> This status indicates
if a PM is detected in slot 12
<Condtype> PM_SLOT12_ABSENT <Probcause>
other(1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { mgnt2AlmboardMgmntSet2 1 }
--- *****************************************************
--- LEAF for the fanMgmnt article
--- *****************************************************
mgnt2AlmfanMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 20 }
mgnt2AlmFanFilterAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Dust Filter Presence :This OID
indicates that the dust filter
is not present<Help> This alarm
indicates if the Dust Filter is
detected in the chassis. <Condtype>
FAN_FILTER_ABSENT <Probcause> other(1)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 16 }
mgnt2AlmPbFan6Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #6 Failed On Fan Module
:This OID indicates a failure on
fan 6. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #6 is in fail condition
<Condtype> PB_FAN6_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 7 }
mgnt2AlmPbFan5Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #5 Failed On Fan Module
:This OID indicates a failure on
fan 5. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #5 is in fail condition
<Condtype> PB_FAN5_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 6 }
mgnt2AlmPbFan4Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #4 Failed On Fan Module
:This OID indicates a failure on
fan 4. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #4 is in fail condition
<Condtype> PB_FAN4_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 5 }
mgnt2AlmPbFan3Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #3 Failed On Fan Module
:This OID indicates a failure on
fan 3. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #3 is in fail condition
<Condtype> PB_FAN3_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 4 }
mgnt2AlmPbFan2Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #2 Failed On Fan Module
:This OID indicates a failure on
fan 2. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #2 is in fail condition
<Condtype> PB_FAN2_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 3 }
mgnt2AlmPbFan1Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Unit #1 Failed On Fan Module
:This OID indicates a failure on
fan 1. Removal of the fan unit
or no rotation sets the OID.
<Help> This alarm indicates if
the FAN #1 is in fail condition
<Condtype> PB_FAN1_FAIL <Probcause>
heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanMgmnt 2 }
--- *****************************************************
--- LEAF for the fanPwrMgmnt article
--- *****************************************************
mgnt2AlmfanPwrMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 24 }
mgnt2AlmFanDefFuseB OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Fuse B Fail :This OID indicates
that the fuse of the power input
B is in fail condition on the Fan
board <Help> Status of the FAN
Fuse B <Condtype> FAN_DEF_FUSE_B
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmfanPwrMgmnt 16 }
mgnt2AlmFanDefFuseA OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Fuse A Fail :This OID indicates
that the fuse of the power input
A is in fail condition on the Fan
board <Help> Status of the FAN
Fuse A <Condtype> FAN_DEF_FUSE_A
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmfanPwrMgmnt 15 }
mgnt2AlmFanPwrFail1 OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Main Power :This OID indicates
a failure on the main power of
the FAN module <Help> This
alarm indicates if one of the
tow main power convert of the
FAN module is in fail condition
<Condtype> FAN_PWR_FAIL_1 <Probcause>
powerProblem (36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmfanPwrMgmnt 13 }
mgnt2AlmFanPwrProtOn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fan Backup Power :This OID indicates
the backup power on the FAN module
is switched on <Condtype> FAN_PWR_PROT_ON
<Probcause> powerProblem (36) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmfanPwrMgmnt 12 }
--- *****************************************************
--- LEAF for the removeablefanModuleFail article
--- *****************************************************
mgnt2AlmremoveablefanModuleFail OBJECT IDENTIFIER ::= { mgnt2alarms 25 }
mgnt2AlmFan4ModuleAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #4 Present In Chassis
:This OID indicates the presence
of the FAN module #4 in the Chassis.<Help>
This alarm indicates if the FAN
module #4 is detected in the chassis.
<Condtype> FAN4_MODULE_ABSENT <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveablefanModuleFail 4 }
mgnt2AlmFan3ModuleAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #3 Present In Chassis
:This OID indicates the presence
of the FAN module #3 in the Chassis.<Help>
This alarm indicates if the FAN
module #3 is detected in the chassis.
<Condtype> FAN3_MODULE_ABSENT <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveablefanModuleFail 3 }
mgnt2AlmFan2ModuleAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #2 Present In Chassis
:This OID indicates the presence
of the FAN module #2 in the Chassis.<Help>
This alarm indicates if the FAN
module #2 is detected in the chassis.
<Condtype> FAN2_MODULE_ABSENT <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveablefanModuleFail 2 }
mgnt2AlmFan1ModuleAbsent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #1 Present In Chassis
:This OID indicates the presence
of the FAN module #1 in the Chassis.<Help>
This alarm indicates if the FAN
module #1 is detected in the chassis.
<Condtype> FAN1_MODULE_ABSENT <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveablefanModuleFail 1 }
--- *****************************************************
--- LEAF for the removeableFanModuleMgmnt article
--- *****************************************************
mgnt2AlmremoveableFanModuleMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 26 }
mgnt2AlmFan4ModuleFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #4 Failure :This OID
indicates a failure on FAN module
#4 <Help> This alarm indicates
if the FAN module #4 is in fail
condition <Condtype> FAN4_MODULE_FAIL
<Probcause> heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveableFanModuleMgmnt 4 }
mgnt2AlmFan3ModuleFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #3 Failure :This OID
indicates a failure on FAN module
#3 <Help> This alarm indicates
if the FAN module #3 is in fail
condition <Condtype> FAN3_MODULE_FAIL
<Probcause> heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveableFanModuleMgmnt 3 }
mgnt2AlmFan2ModuleFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #2 Failure :This OID
indicates a failure on FAN module
#2 <Help> This alarm indicates
if the FAN module #2 is in fail
condition <Condtype> FAN2_MODULE_FAIL
<Probcause> heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveableFanModuleMgmnt 2 }
mgnt2AlmFan1ModuleFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FAN Module #1 Failure :This OID
indicates a failure on FAN module
#1 <Help> This alarm indicates
if the FAN module #1 is in fail
condition <Condtype> FAN1_MODULE_FAIL
<Probcause> heatingVentCoolingSystemProblem
(22) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmremoveableFanModuleMgmnt 1 }
--- *****************************************************
--- LEAF for the swAlarm1 article
--- *****************************************************
mgnt2AlmswAlarm1 OBJECT IDENTIFIER ::= { mgnt2alarms 32 }
mgnt2AlmPollingManagerError OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Polling Manager fail :This OID
indicates a failure on the Manager
polling the PM's <Help>
<Help> This alarm indicates if
there is a polling manager failure
between the MGNT and the Pm's <Condtype>
POLLING_MANAGER_ERROR <Probcause>
adapterError (2) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmswAlarm1 3 }
mgnt2AlmFifoCmdError OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNMP Agent to Transport comm FIFO
fail :This OID indicates a failure
inside the FIFO stack. The FIFO
containing the messages from
the agent (write) to the PMs is
full <Help> This alarm indicates
if there is a communication mismatch
between the MGNT board and all
PM <Condtype> FIFO_CMD_ERROR <Probcause>
adapterError (2) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmswAlarm1 2 }
mgnt2AlmApiError OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Comm fail between Agent and Transport
:This OID indicates a failure detected
on the Agent.The failure is
located on a communication process
with the modules. <Help> This
alarm indicates if there is a communication
mismatch between the MGNT board
and a single PM <Condtype> API_ERROR
<Probcause> adapterError (2) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmswAlarm1 1 }
--- *****************************************************
--- LEAF for the apiErrorCode article
--- *****************************************************
mgnt2AlmapiErrorCode OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
API Error Identification :Error
number and description of the abs1AlmApiError
object <Condtype> API_ERROR_CODE_1
<Probcause> <Alarmtype>
"
::= { mgnt2alarms 33 }
--- *****************************************************
--- LEAF for the logMgmnt article
--- *****************************************************
mgnt2AlmlogMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 34 }
mgnt2AlmLog80Full OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Log File Full Warning :This OID
indicates that a log file is 80%
full. <Help> This alarm indicates
that one of the log file is 80%
Full <Condtype> LOG_80_FULL <Probcause>
fileError (18) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { mgnt2AlmlogMgmnt 2 }
mgnt2AlmLogFileFull OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Log File Full Alarm :This OID
indicates that a log file is full.
This file must be cleared to insure
correct log function <Help> This
alarm indicates that one of the
log file is Full <Condtype> LOG_FILE_FULL
<Probcause> fileError (18) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmlogMgmnt 1 }
--- *****************************************************
--- LEAF for the ntpSyncLoss article
--- *****************************************************
mgnt2AlmntpSyncLoss OBJECT IDENTIFIER ::= { mgnt2alarms 35 }
mgnt2AlmCpuTempOverRange OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
CPU HighTemperature Warning :This
OID indicates a temperature over
the expected range on the CPU<Help>
This warning indicates that the
temperature of the CPU is reaching
its internal limit <Condtype> CPU_TEMP_OVER_RANGE
<Probcause> other(1) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { mgnt2AlmntpSyncLoss 2 }
mgnt2AlmNtpSyncLoss OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
NTP Sync Loss :This OID indicates
a loss of synchronisation with
the NTP Server. <Help> This
alarm indicates a loss of synchronisation
with the NTP Server. <Condtype>
NTP_SYNC_LOSS <Probcause> timingProblem
(53) <Alarmtype> timeDomainViolation
(11) <Polarity> (2)
"
::= { mgnt2AlmntpSyncLoss 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONTROLS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synth5 article
--- *****************************************************
mgnt2Ctrlsynth5 OBJECT IDENTIFIER ::= { mgnt2controls 5 }
mgnt2CtrlChassisColdReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Cold Reset of the Management Module
:This oid triggers a 'cold' reset
of the Chassis . This type of reset
is not traffic affecting and the
modules configuration remains
unchanged. <Help> This control
initiates a cold reset of the MGNT
board,
"
::= { mgnt2Ctrlsynth5 4 }
mgnt2CtrlChassisWarmReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Reset of the Management Module
:This oid triggers a 'warm' reset
of the Chassis . This type of reset
is not traffic affecting and the
modules configuration remains
unchanged. <Help> This control
initiates a warm reset of the MGNT
board,
"
::= { mgnt2Ctrlsynth5 3 }
mgnt2CtrlChassisShutdown OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Shut Down of the Management Module
:This OID shall be set before shutting
down the Chassis power. A delay
of 5 sec is necessary between this
OID is set and power is shut down.
<Help> This control initiates
a shutdown of the MGNT board,
"
::= { mgnt2Ctrlsynth5 2 }
--- *****************************************************
--- LEAF for the testLed article
--- *****************************************************
mgnt2CtrltestLed OBJECT IDENTIFIER ::= { mgnt2controls 18 }
mgnt2CtrlLedOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Switch off Leds Test :This OID
switches off all the Leds as a
test feature <Help> This control
initiates a test leds turning all
the LEDs of the complete chassis
to OFF
"
::= { mgnt2CtrltestLed 3 }
mgnt2CtrlRedLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Red Leds Test :This OID switches
on all the red Leds as a test feature
<Help> This control initiates
a test leds turning all the LEDs
of the chassis to red
"
::= { mgnt2CtrltestLed 2 }
mgnt2CtrlGreenLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Green Leds Test :This OID switches
on all the green Leds as a test
feature <Help> This control initiates
a test leds turning all the LEDs
of the chassis to green
"
::= { mgnt2CtrltestLed 1 }
--- *****************************************************
--- LEAF for the logFile article
--- *****************************************************
mgnt2CtrllogFile OBJECT IDENTIFIER ::= { mgnt2controls 19 }
mgnt2CtrlLogFileReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Log File Reset :This OID clears
all the log files
"
::= { mgnt2CtrllogFile 1 }
--- *****************************************************
--- LEAF for the mgntSaveConfig article
--- *****************************************************
mgnt2CtrlmgntSaveConfig OBJECT IDENTIFIER ::= { mgnt2controls 23 }
mgnt2CtrlSaveConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Save Configuration :This OID is
used save the configuration related
to the enable and mode traps objects
<Help> This control saves the
customer configuration on the MGNT
board
"
::= { mgnt2CtrlmgntSaveConfig 1 }
--- *****************************************************
--- LEAF for the mgntGetGlobalConfig article
--- *****************************************************
mgnt2CtrlmgntGetGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 24 }
mgnt2CtrlGetGlobalConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Get Global Chassis Config :This
OID is used to create a global
configuration file of the chassis
<Help> This control creates a
single configuration file from
PM's and MGNT configuration file
into the RAM
"
::= { mgnt2CtrlmgntGetGlobalConfig 1 }
--- *****************************************************
--- LEAF for the mgntPutGlobalConfig article
--- *****************************************************
mgnt2CtrlmgntPutGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 25 }
mgnt2CtrlPutGlobalConfig OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Put Global Chassis Config :This
OID is used to extract a global
configuration file of the chassis
<Help> This control creates configuration
files to PM's and MGNT from a
single configuration file in the
RAM
"
::= { mgnt2CtrlmgntPutGlobalConfig 1 }
--- *****************************************************
--- LEAF for the mgntAcknowledge article
--- *****************************************************
mgnt2CtrlmgntAcknowledge OBJECT IDENTIFIER ::= { mgnt2controls 26 }
mgnt2CtrlAcknowledge OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Alarm Ack. :This OID is used to
acknowledge the current active
alarms of the chassis <Help>
This control is used to acknowledge
the current active alarms of the
chassis
"
::= { mgnt2CtrlmgntAcknowledge 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONFIG
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the ethPort2 article
--- *****************************************************
mgnt2CfgethPort2 OBJECT IDENTIFIER ::= { mgnt2config 17 }
mgnt2CfgChassisEthernetSplit OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Chassis Ethernet Split :This
OID enables the split between
the two kendings. <Help> Enable/Disable
the switch between the two kendings
"
::= { mgnt2CfgethPort2 2 }
mgnt2CfgEthPort2Disable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
2nd Ethernet Port Disable :This
OID disables 'Ethernet Port 2'
.When not required, this port
must be disabled in order to
prevent unwanted access. <Help>
Disable the second Ethernet port
"
::= { mgnt2CfgethPort2 1 }
--- *****************************************************
--- LEAF for the mgntDccEnable article
--- *****************************************************
mgnt2CfgmgntDccEnable OBJECT-TYPE
SYNTAX Mgnt2DccAccessValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
DCC Access :This OID selects
the mode to enable the DCC on
the slots. This Mode enables the
Slots 2-4-6-8-10 , or the Slots
2-6-10-14-18. <Help> Defines
the DCC access on the backplane
of the chassis (Slots 2-4-6-8-10
or Slots 2-6-10-14-18)
"
::= { mgnt2config 18 }
--- *****************************************************
--- LEAF for the pmTrapEnable article
--- *****************************************************
mgnt2CfgpmTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 20 }
mgnt2CfgPmConfigTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Config Traps Enable :This OID,
when set, enables the generation
of a trap when the configuration
of a PM plugged in the chassis
is modified <Help> In detailed
traps mechanism, enable the trap
emission on PM configuration modificatio
"
::= { mgnt2CfgpmTrapEnable 6 }
mgnt2CfgPmControlTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Control Traps Enable :This OID,
when set, enables the generation
of a trap when a control is sent
to a PM plugged in the chassis
<Help> In detailed traps
mechanism, enable the trap emission
on control sent to PM
"
::= { mgnt2CfgpmTrapEnable 5 }
mgnt2CfgPmMinorTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Minor Alarm Traps Enable :This
OID, when set, enables the generation
of the minor alarm trap for all
the PM plugged in the chassis
<Help> In detailed traps mechanism,
enable the trap emission on minor
alarm detected on PM
"
::= { mgnt2CfgpmTrapEnable 3 }
mgnt2CfgPmMajorTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Major Alarm Traps Enable :This
OID, when set, enables the generation
of the major alarm trap for all
the PM plugged in the chassis
<Help> In detailed traps mechanism,
enable the trap emission on major
alarm detected on PM
"
::= { mgnt2CfgpmTrapEnable 2 }
mgnt2CfgPmCriticalTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Critical Alarm Traps Enable :This
OID, when set, enables the generation
of the critical alarm trap for
all the PM plugged in the chassis
<Help> In detailed traps mechanism,
enable the trap emission on critical
alarm detected on PM
"
::= { mgnt2CfgpmTrapEnable 1 }
--- *****************************************************
--- LEAF for the mgntTrapEnable article
--- *****************************************************
mgnt2CfgmgntTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 21 }
mgnt2CfgMgntEventTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Event Traps Enable :This
OID, when set, enables the generation
of a trap when an event occurs
on the chassis <Help> In detailed
traps mechanism, enable the trap
emission on event detected in the
chassis
"
::= { mgnt2CfgmgntTrapEnable 7 }
mgnt2CfgMgntConfigTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Config Traps Enable :This
OID, when set, enables the generation
of a trap when the configuration
of a MGNT plugged in the chassis
is modified <Help> In detailed
traps mechanism, enable the trap
emission on MGNT configuration
modification
"
::= { mgnt2CfgmgntTrapEnable 6 }
mgnt2CfgMgntControlTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Control Traps Enable :This
OID, when set, enables the generation
of a trap when a control is sent
to a MGNT plugged in the chassis
<Help> In detailed traps
mechanism, enable the trap emission
on control sent to MGNT
"
::= { mgnt2CfgmgntTrapEnable 5 }
mgnt2CfgMgntMinorTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Minor Alarm Traps Enable
:This OID, when set, enables the
generation of the minor alarm trap
for the MGNT and FAN board <Help>
In detailed traps mechanism, enable
the trap emission on minor alarm
detected on MGNT and FAN
"
::= { mgnt2CfgmgntTrapEnable 3 }
mgnt2CfgMgntMajorTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Major Traps Enable :This
OID, when set, enables the generation
of the major alarm trap for the
MGNT and FAN board <Help> In
detailed traps mechanism, enable
the trap emission on major alarm
detected on MGNT and FAN
"
::= { mgnt2CfgmgntTrapEnable 2 }
mgnt2CfgMgntCriticalTrapEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
MGNT Critical Alarm Traps Enable
:This OID, when set, enables the
generation of the critical alarm
trap for the MGNT and FAN board
<Help> In detailed traps mechanism,
enable the trap emission on critical
alarm detected on MGNT and FAN
"
::= { mgnt2CfgmgntTrapEnable 1 }
--- *****************************************************
--- LEAF for the mgntTrapMode article
--- *****************************************************
mgnt2CfgmgntTrapMode OBJECT-TYPE
SYNTAX Mgnt2TrapModeValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Traps Mode :This OID is used to
define the trap mode (synthetic
or detailed mode) <Help> Selects
the traps mechanism
"
::= { mgnt2config 22 }
--- *****************************************************
--- LEAF for the syslogEnable article
--- *****************************************************
mgnt2CfgsyslogEnable OBJECT IDENTIFIER ::= { mgnt2config 23 }
mgnt2CfgSyslogAlarmEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Syslog Alarm Enable :This OID,
when set, enables the generation
of a syslog, when an alarm occurs
<Help> Enable a syslog emission
on an alarm detected on the chassi
"
::= { mgnt2CfgsyslogEnable 4 }
mgnt2CfgSyslogCtrlEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Syslog Control Enable :This OID,
when set, enables the generation
of a syslog, when a control is
set <Help> Enable a syslog
emission on a control operated
on the chassis
"
::= { mgnt2CfgsyslogEnable 3 }
mgnt2CfgSyslogConfigEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Syslog Config Enable :This OID,
when set, enables the generation
of a syslog, when the configuration
has been changed. <Help> Enable
a syslog emission on a configuration
change detected on the chassis
"
::= { mgnt2CfgsyslogEnable 2 }
mgnt2CfgSyslogEventEn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Syslog Event Enable :This OID,
when set, enables the generation
of a syslog, when an event has
been detected <Help> Enable
a syslog emission on event detected
on the chassis
"
::= { mgnt2CfgsyslogEnable 1 }
--- *****************************************************
--- LEAF for the ntpTimeZone article
--- *****************************************************
mgnt2CfgntpTimeZone OBJECT-TYPE
SYNTAX INTEGER (-12..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
NTP Time Zone :This OID defines
the time zone of the MGNT board
for the NTP server <Help> This
object defines the time zone of
the MGNT board (from -12 to +12
hours from the GMT).
"
::= { mgnt2config 24 }
--- *****************************************************
--- LEAF for the pmConfEnable article
--- *****************************************************
mgnt2CfgpmConfEnable OBJECT IDENTIFIER ::= { mgnt2config 25 }
mgnt2CfgPmRestoreEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Automatic Config Restore :This
OID enables the automatic PM configuration
restore mechanism on PM insertion
<Help> This parameter enables
the automatic PM configuration
restore mechanism on PM insertio
"
::= { mgnt2CfgpmConfEnable 2 }
mgnt2CfgPmBackupEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Automatic Config Backup :This
OID enables the automatic PM configuration
backup mechanism on PM insertion
or PM configuration modification.
<Help> This parameter enables
the automatic PM configuration
backup mechanism on PM insertion
or PM configuration modificatio
"
::= { mgnt2CfgpmConfEnable 1 }
--- *****************************************************
--- LEAF for the inactivityTimeout article
--- *****************************************************
mgnt2CfginactivityTimeout OBJECT-TYPE
SYNTAX INTEGER (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Idle Timeout :This OID defines
the idle timeout (in minutes) to
automatically logout from the craft
and from the CLI. <Help> This
object defines the idle timeout
(in minutes) to automatically logout
from the craft and from the CLI
"
::= { mgnt2config 26 }
--- *****************************************************
--- LEAF for the cliAccess article
--- *****************************************************
mgnt2CfgcliAccess OBJECT-TYPE
SYNTAX Mgnt2CliAccessValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
CLI access :This OID selects
the protocol for the remote access
to a CLI user. <Help> This object
defines the protocol used for a
remote CLI.
"
::= { mgnt2config 27 }
--- *****************************************************
--- LEAF for the craftAccess article
--- *****************************************************
mgnt2CfgcraftAccess OBJECT-TYPE
SYNTAX Mgnt2CraftAccessValues
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
CRAFT access :This OID selects
the remote access to a CRAFT user.
<Help> This object defines the
access for a remote CRAFT.
"
::= { mgnt2config 28 }
--- *****************************************************
--- LEAF for the perfModes1 article
--- *****************************************************
mgnt2CfgperfModes1 OBJECT-TYPE
SYNTAX EkiSynchroMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PERF Synchro Source :This OID
selects the source of the synchronisation
(Internal/External). <Help> This
object defines the source of the
synchronization to operate performance
monitoring.
"
::= { mgnt2config 29 }
--- *****************************************************
--- LEAF for the alarmModelActiv article
--- *****************************************************
mgnt2CfgalarmModelActiv OBJECT-TYPE
SYNTAX Mgnt2AckMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Acknowledge mode :This OID defines
the alarms akcnowledge mode <Help>
This configuration defines the
alarms akcnowledge mode
"
::= { mgnt2config 30 }
--- *****************************************************
--- LEAF for the networkInput article
--- *****************************************************
mgnt2CfgnetworkInput OBJECT-TYPE
SYNTAX Mgnt2NetMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Network input :This OID selects
the connection of the Ethernet
Network input to either the switches
(2) or the daughter board (1) ,
in this case the MGNT can act as
a router <Help> This configuration
defines the use of the Network
input of the front panel
"
::= { mgnt2config 31 }
--- *****************************************************
--- LEAF for the masterEthMode article
--- *****************************************************
mgnt2CfgmasterEthMode OBJECT-TYPE
SYNTAX Mgnt2MasterEthMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
DHCP Master Ethernet Mode :This
OID selects the mode of the Master
Ethernet in DHCP mode (2) or in
Static Mode(1) <Help> This configuration
defines the use of the Master Ethernet
Mode
"
::= { mgnt2config 32 }
--- *****************************************************
--- LEAF for the subnetMode article
--- *****************************************************
mgnt2CfgsubnetMode OBJECT-TYPE
SYNTAX Mgnt2SubnetEthMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
DHCP Subnet Mode :This OID selects
the mode of the Subnet in DHCP
mode (2) or in Static Mode(1)
<Help> This configuration defines
the use of the Subnet Mode
"
::= { mgnt2config 33 }
--- *****************************************************
--- LEAF for the rstpMode article
--- *****************************************************
mgnt2CfgrstpMode OBJECT IDENTIFIER ::= { mgnt2config 34 }
mgnt2CfgRstpEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
RSTP Enable :This OID enables
the RSTP algorythm <Help> This
configuration defines the use of
RSTP
"
::= { mgnt2CfgrstpMode 1 }
--- *****************************************************
--- LEAF for the lldpMode article
--- *****************************************************
mgnt2CfglldpMode OBJECT IDENTIFIER ::= { mgnt2config 35 }
mgnt2CfgLldpEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
LLDP Enable :This OID enables
the LLDP algorythm <Help> This
configuration defines the use of
LLDP
"
::= { mgnt2CfglldpMode 1 }
--- *****************************************************
--- LEAF for the logMode article
--- *****************************************************
mgnt2CfglogMode OBJECT-TYPE
SYNTAX Mgnt2LogFileMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Log Mode :This OID enables the
log file mode<Help> This configuration
defines the use of the log mod
"
::= { mgnt2config 36 }
--- *****************************************************
--- LEAF for the nodeMode article
--- *****************************************************
mgnt2CfgnodeMode OBJECT IDENTIFIER ::= { mgnt2config 37 }
mgnt2CfgNodeControllerEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Node Controller Mode :This OID
enables the node controller mode<Help>
This configuration defines the
use of the node controller mod
"
::= { mgnt2CfgnodeMode 1 }
--- *****************************************************
--- LEAF for the unprivilegedUsersMode article
--- *****************************************************
mgnt2CfgunprivilegedUsersMode OBJECT IDENTIFIER ::= { mgnt2config 38 }
mgnt2CfgRestrictUnprivilegeUsers OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Restrict Unprivileged Users Rights
:This OID enables the restriction
of unprivileged user rights to
modify their own password <Help>
This parameter enables the restriction
of unprivileged user rights to
modify their own password
"
::= { mgnt2CfgunprivilegedUsersMode 1 }
--- *****************************************************
--- LEAF for the oscDccLinkUpThreshold article
--- *****************************************************
mgnt2CfgoscDccLinkUpThreshold OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
OSC/DCC Link Up Thresh. [10-30]s
:This OID defines the confirmation
threshold to consider an OSC/DCC
link as up <Help> This parameter
defines the confirmation threshold
to consider an OSC/DCC link as
up
"
::= { mgnt2config 39 }
--- *****************************************************
--- LEAF for the oscDccLinkDownThreshold article
--- *****************************************************
mgnt2CfgoscDccLinkDownThreshold OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
OSC/DCC Link Down Thresh. [2-3]s
:This OID defines the confirmation
threshold to consider an OSC/DCC
link as down <Help> This parameter
defines the confirmation threshold
to consider an OSC/DCC link as
down.
"
::= { mgnt2config 40 }
--- *****************************************************
--- LEAF for the accountAutoLock article
--- *****************************************************
mgnt2CfgaccountAutoLock OBJECT-TYPE
SYNTAX INTEGER (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Account Auto-Lock [-1 / 1-10]
err :This OID defines the number
of error password to lock an account.
This counter is reset on successful
login or after an administrator
defined period (see Fail count
reset) Set to -1 to disables the
feature.<Help> This parameter defines
the number of error password to
lock an account. This counter is
reset on successful login or after
an administrator defined period
(see Fail count reset) Set to -1
to disables the feature.
"
::= { mgnt2config 41 }
--- *****************************************************
--- LEAF for the failCountReset article
--- *****************************************************
mgnt2CfgfailCountReset OBJECT-TYPE
SYNTAX INTEGER (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Fail Count Reset [-1 / 1-10] hrs
:This OID defines the minimum time
(in hours) to reset the failed
login counter. This counter is
also reset on successful login.
Set to -1 to disable the feature.<Help>
This parameter defines the minimum
time (in hours) to reset the failed
login counter. This counter is
also reset on successful login.
Set to -1 to disable the feature
"
::= { mgnt2config 42 }
--- *****************************************************
--- LEAF for the ftpMode article
--- *****************************************************
mgnt2CfgftpMode OBJECT IDENTIFIER ::= { mgnt2config 44 }
mgnt2CfgFtpEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
FTP Enable :This OID enables the
FTP protocol <Help> This configuration
enables the FTP protocol
"
::= { mgnt2CfgftpMode 1 }
--- *****************************************************
--- LEAF for the tftpMode article
--- *****************************************************
mgnt2CfgtftpMode OBJECT IDENTIFIER ::= { mgnt2config 45 }
mgnt2CfgTftpEnable OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
TFTP Enable :This OID enables
the TFTP protocol <Help> This
configuration enables the TFTP
protocol
"
::= { mgnt2CfgtftpMode 1 }
--- *****************************************************
--- TRAPS
--- *****************************************************
mgnt2TrapBoardNumber OBJECT-TYPE
SYNTAX INTEGER(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the slot number of the PM that sent the last trap"
::= { mgnt2Traps 50 }
mgnt2TrapSeverity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the trap severity"
::= { mgnt2Traps 51 }
mgnt2TrapSourcePm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the mnemonic of the pm who sent a trap"
::= { mgnt2Traps 52 }
mgnt2TrapSourcePortType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the type of the port who sent a trap"
::= { mgnt2Traps 53 }
mgnt2TrapSourcePortNumber OBJECT-TYPE
SYNTAX INTEGER(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
::= { mgnt2Traps 54 }
mgnt2TrapSourceLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the label of the alarm who sent a trap"
::= { mgnt2Traps 55 }
mgnt2TrapSourceValue OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the value of the alarm who sent a trap"
::= { mgnt2Traps 56 }
mgnt2TrapEventLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the label of the event"
::= { mgnt2Traps 57 }
mgnt2TrapNodeControllerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the IP address of the Node Controller"
::= { mgnt2Traps 58 }
mgnt2TrapChassisId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This OID gives the chassis ID "
::= { mgnt2Traps 59 }
mgnt2TrapApi NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber,mgnt2AlmapiErrorCode}
STATUS current
--&FILTNAME "API Error"
--&ACTIONS { log, minor }
--&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmapiErrorCode "$2"}
--&MESG "API Error number $2 received from Board in slot $1 ($A)"
DESCRIPTION "Api error trap with its number"
::= { mgnt2Traps 1 }
mgnt2TrapSwError NOTIFICATION-TYPE
OBJECTS {mgnt2AlmFifoCmdError}
STATUS current
--&FILTNAME "SW Error"
--&ACTIONS { log, minor }
--&MATCH { mgnt2AlmFifoCmdError "$1"}
--&MESG "Software Error detected"
DESCRIPTION "Chassis software error other API"
::= { mgnt2Traps 2 }
mgnt2TrapBoardInserted NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber}
STATUS current
--&FILTNAME "Board Inserted"
--&ACTIONS { log, info }
--&MATCH { mgnt2TrapBoardNumber "$1"}
--&MESG "Board Inserted in Slot $1 ($A)"
DESCRIPTION "A board has been plugged in"
::= { mgnt2Traps 4}
mgnt2TrapBoardRemoved NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber}
STATUS current
--&FILTNAME "Board Removed"
--&ACTIONS { log, info }
--&MATCH { mgnt2TrapBoardNumber "$1"}
--&MESG "Board Removed from Slot $1 ($A)"
DESCRIPTION "A board has been plugged out"
::= { mgnt2Traps 5 }
mgnt2TrapRestoreConfDone NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber}
STATUS current
--&FILTNAME "Config Restored"
--&ACTIONS { log, info }
--&MATCH { mgnt2TrapBoardNumber "$1"}
--&MESG "The Configuration of Board in Slot $1 has been restored ($A)"
DESCRIPTION "The Configuration has been restored from the management board"
::= { mgnt2Traps 6 }
mgnt2TrapGlobalPowerFail NOTIFICATION-TYPE
OBJECTS {mgnt2AlmDef48b, mgnt2AlmDef48a}
STATUS current
--&FILTNAME "Power A Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmDef48b "off", mgnt2AlmDef48a "on"}
--&MESG "Power Input A Fail on Chassis ($A)"
--&FILTNAME "Power B Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmDef48b "on", mgnt2AlmDef48a "off"}
--&MESG "Power Input B Fail on Chassis ($A)"
--&FILTNAME "Power A and B Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "Power A Fail ON", "Power B Fail ON"}
--&MATCH { mgnt2AlmDef48b "off", mgnt2AlmDef48a "off"}
--&MESG "Power Input A and B Present on Chassis ($A)"
DESCRIPTION "A global power supply failure has been detected"
::= { mgnt2Traps 8 }
mgnt2TrapFanPowerFail NOTIFICATION-TYPE
OBJECTS {mgnt2AlmFanDefFuseB , mgnt2AlmFanDefFuseA, mgnt2AlmFanPwrFail1}
STATUS current
--&FILTNAME "FAN Fuse A Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
--&MESG "Power Input A Fail on FAN ($A)"
--&FILTNAME "FAN Fuse B Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "*"}
--&MESG "Power Input B Fail on FAN ($A)"
--&FILTNAME "FAN Fuse A and B Fail ON"
--&ACTIONS { log, critical }
--&MATCH { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
--&MESG "Power Input A and B Fail on FAN ($A)"
--&FILTNAME "FAN Fuse A and B Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "FAN Fuse A Fail ON", "FAN Fuse B Fail ON", "FAN Fuse A and B Fail ON"}
--&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "off"}
--&MESG "Power Input A and B Present on FAN ($A)"
--&FILTNAME "FAN Power Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "on"}
--&MESG "Power Converter Fail on FAN ($A)"
DESCRIPTION "A Fan power supply failure has been detected"
::= { mgnt2Traps 9 }
mgnt2TrapGigmPowerFail NOTIFICATION-TYPE
OBJECTS {mgnt2AlmMgntDefFuseA, mgnt2AlmMgntDefFuseB}
STATUS current
--&FILTNAME "Fuse B Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "on"}
--&MESG "Power Input B Fail on MGNT ($A)"
--&FILTNAME "Fuse A Fail ON"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmMgntDefFuseA "on", mgnt2AlmMgntDefFuseB "off"}
--&MESG "Power Input A Fail on MGNT ($A)"
--&FILTNAME "Fuse A and B Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "Fuse B Fail ON", "Fuse A Fail ON"}
--&MATCH { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "off"}
--&MESG "Power Input A and B Present on MGNT ($A)"
DESCRIPTION "A power supply default has been detected in the management board"
::= { mgnt2Traps 10 }
mgnt2TrapFanFail NOTIFICATION-TYPE
OBJECTS {mgnt2AlmPbFan1Fail, mgnt2AlmPbFan2Fail, mgnt2AlmPbFan3Fail, mgnt2AlmPbFan4Fail, mgnt2AlmPbFan5Fail, mgnt2AlmPbFan6Fail}
STATUS current
--&FILTNAME "All trap Fail"
--&ACTIONS { log, critical }
--&MATCH { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "on"}
--&MESG "The FAN tray is in Failure condition (all FAN fail) ($A)"
--&FILTNAME "FAN 1 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
--&MESG "Fan number 1 Fail on FAN Module ($A)"
--&FILTNAME "FAN 2 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
--&MESG "Fan number 2 Fail on FAN Module ($A)"
--&FILTNAME "FAN 3 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
--&MESG "Fan number 3 Fail on FAN Module ($A)"
--&FILTNAME "FAN 4 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
--&MESG "Fan number 4 Fail on FAN Module ($A)"
--&FILTNAME "FAN 5 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "*"}
--&MESG "Fan number 5 Fail on FAN Module ($A)"
--&FILTNAME "FAN 6 Fail"
--&ACTIONS { log, major }
--&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "on"}
--&MESG "Fan number 6 Fail on FAN Module ($A)"
--&FILTNAME "FAN Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "All trap Fail"}
--&MATCH { mgnt2AlmPbFan1Fail "off", mgnt2AlmPbFan2Fail "off", mgnt2AlmPbFan3Fail "off", mgnt2AlmPbFan4Fail "off", mgnt2AlmPbFan5Fail "off", mgnt2AlmPbFan6Fail "off"}
--&MESG "The FAN tray is fully operational (no FAN fail)"
DESCRIPTION "A Fan failure has been detected"
::= { mgnt2Traps 11 }
mgnt2TrapLogFileFull NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber, mgnt2AlmLog80Full, mgnt2AlmLogFileFull}
STATUS current
--&FILTNAME "Log almost full"
--&ACTIONS { log, warning }
--&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "on", mgnt2AlmLogFileFull "off"}
--&MESG "The log of Board in slot $1 is 80% full ($A)"
--&FILTNAME "Log Full"
--&ACTIONS { log, major }
--&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "*", mgnt2AlmLogFileFull "on"}
--&MESG "The log of Board in slot $1 is Full ($A)"
DESCRIPTION "Indicates that the corresponding log file is almost full"
::= { mgnt2Traps 20 }
mgnt2TrapAlarm NOTIFICATION-TYPE
OBJECTS {mgnt2TrapSeverity, mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
STATUS current
--&FILTNAME "critical clear"
--&ACTIONS { log, normal }
--&CLEARS { "critical detect" }
--&MATCH { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
--&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "critical detect"
--&ACTIONS { log, critical }
--&MATCH { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
--&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "major clear"
--&ACTIONS { log, normal }
--&CLEARS { "major detect" }
--&MATCH { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
--&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "major detect"
--&ACTIONS { log, major }
--&MATCH { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
--&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "minor clear"
--&ACTIONS { log, normal }
--&CLEARS { "minor detect" }
--&MATCH { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
--&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "minor detect"
--&ACTIONS { log, minor }
--&MATCH { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
--&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "warning clear"
--&ACTIONS { log, normal }
--&CLEARS { "warning detect" }
--&MATCH { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
--&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "warning detect"
--&ACTIONS { log, minor }
--&MATCH { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
--&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "indeterminate clear"
--&ACTIONS { log, normal }
--&CLEARS { "indeterminate detect" }
--&MATCH { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
--&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
--&FILTNAME "indeterminate detect"
--&ACTIONS { log, minor }
--&MATCH { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
--&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
DESCRIPTION "Indicates that an alarm state has changed"
::= { mgnt2Traps 30 }
mgnt2TrapEvent NOTIFICATION-TYPE
OBJECTS {mgnt2TrapBoardNumber, mgnt2TrapEventLabel, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
STATUS current
--&FILTNAME "event"
--&ACTIONS { log, info }
--&CLEARS { "critical detect" }
--&MATCH {mgnt2TrapBoardNumber "$1", mgnt2TrapEventLabel "$2" }
--&MESG "$2 (Slot $1) ($A)"
DESCRIPTION "Indicates that an event has occured"
::= { mgnt2Traps 31 }
mgnt2TrapControl NOTIFICATION-TYPE
OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
STATUS current
--&FILTNAME "control sent"
--&ACTIONS { log, info }
--&MATCH { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5" }
--&MESG "Controls ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"
DESCRIPTION "Indicates that a control has been set to the module"
::= { mgnt2Traps 32 }
mgnt2TrapConfig NOTIFICATION-TYPE
OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
STATUS current
--&FILTNAME "config sent"
--&ACTIONS { log, info }
--&MATCH { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5"}
--&MESG "Config Word ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"
DESCRIPTION "Indicates that a config word has been changed"
::= { mgnt2Traps 33 }
END
Reference in New Issue View Git Blame Copy Permalink