4793 lines
180 KiB
Plaintext
4793 lines
180 KiB
Plaintext
CTRON-IPX-ROUTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-ipx-router-mib.txt
|
|
-- Revision: 1.01.03
|
|
-- Part Number: 2170987
|
|
-- Date: August 11, 1995
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise specific IPX Routing Services MIB.
|
|
--
|
|
--
|
|
-- This module will be extended as required.
|
|
--
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
|
|
|
|
-- Copyright August 95 Cabletron Systems
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
MacAddress
|
|
FROM BRIDGE-MIB
|
|
nwRtrProtoSuites
|
|
FROM ROUTER-OIDS
|
|
Counter, TimeTicks, Gauge
|
|
FROM RFC1155-SMI;
|
|
|
|
|
|
-- The IPX Router Group.
|
|
|
|
nwIpxRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 2 }
|
|
|
|
nwIpxMibs OBJECT IDENTIFIER ::= { nwIpxRouter 1 }
|
|
nwIpxComponents OBJECT IDENTIFIER ::= { nwIpxRouter 2 }
|
|
|
|
-- IPX Router Component Groups
|
|
|
|
nwIpxSystem OBJECT IDENTIFIER ::= { nwIpxComponents 1 }
|
|
nwIpxForwarding OBJECT IDENTIFIER ::= { nwIpxComponents 2 }
|
|
nwIpxTopology OBJECT IDENTIFIER ::= { nwIpxComponents 4 }
|
|
nwIpxFib OBJECT IDENTIFIER ::= { nwIpxComponents 5 }
|
|
nwIpxEndSystems OBJECT IDENTIFIER ::= { nwIpxComponents 6 }
|
|
nwIpxAccessControl OBJECT IDENTIFIER ::= { nwIpxComponents 7 }
|
|
nwIpxFilters OBJECT IDENTIFIER ::= { nwIpxComponents 8 }
|
|
nwIpxRedirector OBJECT IDENTIFIER ::= { nwIpxComponents 9 }
|
|
nwIpxEvent OBJECT IDENTIFIER ::= { nwIpxComponents 10 }
|
|
nwIpxWorkGroup OBJECT IDENTIFIER ::= { nwIpxComponents 11 }
|
|
|
|
|
|
-- IPX Router System Groups
|
|
|
|
nwIpxSysConfig OBJECT IDENTIFIER ::= { nwIpxSystem 1 }
|
|
nwIpxSysAdministration OBJECT IDENTIFIER ::= { nwIpxSystem 2 }
|
|
|
|
-- IPX Router Forwarding Groups
|
|
|
|
nwIpxFwdSystem OBJECT IDENTIFIER ::= { nwIpxForwarding 1 }
|
|
nwIpxFwdInterfaces OBJECT IDENTIFIER ::= { nwIpxForwarding 2 }
|
|
|
|
nwIpxFwdCounters OBJECT IDENTIFIER ::= { nwIpxFwdSystem 1 }
|
|
nwIpxFwdIfConfig OBJECT IDENTIFIER ::= { nwIpxFwdInterfaces 1 }
|
|
nwIpxFwdIfCounters OBJECT IDENTIFIER ::= { nwIpxFwdInterfaces 2 }
|
|
|
|
|
|
-- IPX Router Routing Groups
|
|
|
|
nwIpxDistanceVector OBJECT IDENTIFIER ::= { nwIpxTopology 1 }
|
|
nwIpxLinkState OBJECT IDENTIFIER ::= { nwIpxTopology 2 }
|
|
|
|
nwIpxRip OBJECT IDENTIFIER ::= { nwIpxDistanceVector 1 }
|
|
nwIpxSap OBJECT IDENTIFIER ::= { nwIpxDistanceVector 2 }
|
|
|
|
nwIpxRipSystem OBJECT IDENTIFIER ::= { nwIpxRip 1 }
|
|
nwIpxRipInterfaces OBJECT IDENTIFIER ::= { nwIpxRip 2 }
|
|
nwIpxRipDatabase OBJECT IDENTIFIER ::= { nwIpxRip 3 }
|
|
nwIpxRipFilters OBJECT IDENTIFIER ::= { nwIpxRip 4 }
|
|
|
|
nwIpxRipConfig OBJECT IDENTIFIER ::= { nwIpxRipSystem 1 }
|
|
nwIpxRipCounters OBJECT IDENTIFIER ::= { nwIpxRipSystem 2 }
|
|
|
|
nwIpxRipIfConfig OBJECT IDENTIFIER ::= { nwIpxRipInterfaces 1 }
|
|
nwIpxRipIfCounters OBJECT IDENTIFIER ::= { nwIpxRipInterfaces 2 }
|
|
|
|
nwIpxSapSystem OBJECT IDENTIFIER ::= { nwIpxSap 1 }
|
|
nwIpxSapInterfaces OBJECT IDENTIFIER ::= { nwIpxSap 2 }
|
|
nwIpxSapServerTable OBJECT IDENTIFIER ::= { nwIpxSap 3 }
|
|
nwIpxSapFilters OBJECT IDENTIFIER ::= { nwIpxSap 4 }
|
|
|
|
nwIpxSapConfig OBJECT IDENTIFIER ::= { nwIpxSapSystem 1 }
|
|
nwIpxSapCounters OBJECT IDENTIFIER ::= { nwIpxSapSystem 2 }
|
|
|
|
nwIpxSapIfConfig OBJECT IDENTIFIER ::= { nwIpxSapInterfaces 1 }
|
|
nwIpxSapIfCounters OBJECT IDENTIFIER ::= { nwIpxSapInterfaces 2 }
|
|
|
|
nwIpxNlsp OBJECT IDENTIFIER ::= { nwIpxLinkState 1 }
|
|
|
|
-- IPX Router Host End Systems Groups
|
|
|
|
nwIpxHostsSystem OBJECT IDENTIFIER ::= { nwIpxEndSystems 1 }
|
|
nwIpxHostsInterfaces OBJECT IDENTIFIER ::= { nwIpxEndSystems 2 }
|
|
nwIpxHostsToMedia OBJECT IDENTIFIER ::= { nwIpxEndSystems 3 }
|
|
|
|
-- IPX Router Access Control Group
|
|
|
|
-- IPX Router Redirector Group
|
|
|
|
nwIpxNetBIOS OBJECT IDENTIFIER ::= { nwIpxRedirector 1 }
|
|
nwIpxBroadcast OBJECT IDENTIFIER ::= { nwIpxRedirector 2 }
|
|
nwIpxEcho OBJECT IDENTIFIER ::= { nwIpxRedirector 3 }
|
|
|
|
nwIpxNetBIOSSystem OBJECT IDENTIFIER ::= { nwIpxNetBIOS 1 }
|
|
nwIpxNetBIOSInterface OBJECT IDENTIFIER ::= { nwIpxNetBIOS 2 }
|
|
|
|
nwIpxNetBIOSConfig OBJECT IDENTIFIER ::= { nwIpxNetBIOSSystem 1 }
|
|
nwIpxNetBIOSCounters OBJECT IDENTIFIER ::= { nwIpxNetBIOSSystem 2 }
|
|
|
|
nwIpxNetBIOSIfConfig OBJECT IDENTIFIER ::= { nwIpxNetBIOSInterface 1}
|
|
nwIpxNetBIOSIfCounters OBJECT IDENTIFIER ::= { nwIpxNetBIOSInterface 2}
|
|
|
|
nwIpxBroadcastSystem OBJECT IDENTIFIER ::= { nwIpxBroadcast 1 }
|
|
nwIpxBroadcastInterface OBJECT IDENTIFIER ::= { nwIpxBroadcast 2 }
|
|
|
|
nwIpxBroadcastConfig OBJECT IDENTIFIER ::= { nwIpxBroadcastSystem 1 }
|
|
nwIpxBroadcastCounters OBJECT IDENTIFIER ::= { nwIpxBroadcastSystem 2 }
|
|
|
|
nwIpxBroadcastIfConfig OBJECT IDENTIFIER ::= { nwIpxBroadcastInterface 1 }
|
|
nwIpxBroadcastIfCounters OBJECT IDENTIFIER ::= { nwIpxBroadcastInterface 2 }
|
|
|
|
nwIpxEchoSystem OBJECT IDENTIFIER ::= { nwIpxEcho 1 }
|
|
nwIpxEchoInterface OBJECT IDENTIFIER ::= { nwIpxEcho 2 }
|
|
|
|
nwIpxEchoConfig OBJECT IDENTIFIER ::= { nwIpxEchoSystem 1 }
|
|
nwIpxEchoCounters OBJECT IDENTIFIER ::= { nwIpxEchoSystem 2 }
|
|
|
|
nwIpxEchoIfConfig OBJECT IDENTIFIER ::= { nwIpxEchoInterface 1 }
|
|
nwIpxEchoIfCounters OBJECT IDENTIFIER ::= { nwIpxEchoInterface 2 }
|
|
|
|
-- IPX Router Event Log Group
|
|
|
|
nwIpxEventLogConfig OBJECT IDENTIFIER ::= { nwIpxEvent 1 }
|
|
nwIpxEventLogFilterTable OBJECT IDENTIFIER ::= { nwIpxEvent 2 }
|
|
nwIpxEventLogTable OBJECT IDENTIFIER ::= { nwIpxEvent 3 }
|
|
|
|
|
|
-- IPX Router Work-Group Group
|
|
|
|
IpxAddress ::= OCTET STRING
|
|
-- MacAddress ::= OCTET STRING (SIZE (6))
|
|
|
|
|
|
-- IPX MIB Group
|
|
-- This group contains information about the revision level of this
|
|
-- MIB within the device. It allows verification of the released
|
|
-- version without having to read other objects.
|
|
|
|
nwIpxMibRevText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the IPX MIB in textual
|
|
format."
|
|
::= { nwIpxMibs 1 }
|
|
|
|
|
|
-- IPX Router System Group
|
|
-- This group contains the objects related to the IPX Router at a
|
|
-- global device-wide level.
|
|
|
|
-- IPX System Configuration Group
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IPX routing services at a global,
|
|
-- device-wide level.
|
|
|
|
nwIpxSysRouterId OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IPX Address used to uniquely identify the host (device) running
|
|
IPX Routing Services. The value of nwIpxSysRouterId is equal to the
|
|
highest IPX address assigned in the IPX Address Table."
|
|
::= { nwIpxSysConfig 1 }
|
|
|
|
-- IPX System Administration Group
|
|
-- This group contains the objects that pertain to the administration of
|
|
-- IPX routing services at a global, device-wide level.
|
|
|
|
nwIpxSysAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX Routing Services system-wide.
|
|
Enabled (3) causes IPX Routing Services to become active on all router
|
|
ports configured and enabled for IPX Routing Services. Disabled (2)
|
|
causes IPX routing services to become inactive system-wide."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSysAdministration 1 }
|
|
|
|
nwIpxSysOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operating condition of IPX Routing Services system-wide.
|
|
The value of nwIpxSysOperStatus indicates any problem with your IPX
|
|
Routing Services configuration. A value of 6 indicates that regardless
|
|
of the value of nwIpxSysAdminStatus, IPX Routing Services is not
|
|
operating because of an invalid configuration."
|
|
::= { nwIpxSysAdministration 2 }
|
|
|
|
nwIpxSysAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets IPX Routing Services system-wide. Reset (2) forces a restart
|
|
of IPX Routing Services without a graceful shutdown on any active
|
|
router ports and without affecting any other routing services."
|
|
DEFVAL { other }
|
|
::= { nwIpxSysAdministration 3 }
|
|
|
|
nwIpxSysOperationalTimel OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxSysOperStatus has been in its current administrative state."
|
|
::= { nwIpxSysAdministration 4 }
|
|
|
|
nwIpxSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the IPX Routing Services
|
|
firmware in textual format."
|
|
::= { nwIpxSysAdministration 5 }
|
|
|
|
|
|
-- IPX Forwarding Group
|
|
-- This group contains the managed objects used to setup and configure
|
|
-- the IPX router port for packet forwarding as well as the aggregate
|
|
-- and per-interface IPX packet forwarding counters.
|
|
|
|
-- IPX System-wide Packet Forwarding Counters
|
|
-- This group contains the aggregate (device-wide) IPX packet forwarding
|
|
-- counters. The byte counters include bytes for the network layer on
|
|
-- up, framing is not included.
|
|
nwIpxFwdCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide) IPX
|
|
packet and byte counters. Enabled (3) causes these counters to become
|
|
active. Disabled (2) causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxFwdCounters 1 }
|
|
|
|
nwIpxFwdCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) IPX packet and byte counters.
|
|
Reset (2) resets the IPX aggregate counters to 0.
|
|
nwIpxFwdCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpxFwdCounters 2 }
|
|
|
|
nwIpxFwdCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxFwdCtrAdminStatus has been in the current state."
|
|
::= { nwIpxFwdCounters 3 }
|
|
|
|
nwIpxFwdCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been received,
|
|
system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 4 }
|
|
|
|
nwIpxFwdCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been transmitted,
|
|
system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 5 }
|
|
|
|
nwIpxFwdCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been forwarded,
|
|
system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 6 }
|
|
|
|
nwIpxFwdCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 7 }
|
|
|
|
nwIpxFwdCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded,
|
|
system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 8 }
|
|
|
|
nwIpxFwdCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded,
|
|
system-wide, during nwIpxFwdCtrOperationalTime, because of addressing
|
|
errors in the IPX header."
|
|
::= { nwIpxFwdCounters 9 }
|
|
|
|
nwIpxFwdCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded,
|
|
system-wide, during nwIpxFwdCtrOperationalTime, because an invalid
|
|
packet length is contained in the IPX header."
|
|
::= { nwIpxFwdCounters 10 }
|
|
|
|
nwIpxFwdCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded,
|
|
system-wide, during nwIpxFwdCtrOperationalTime, because of an invalid
|
|
IPX header."
|
|
::= { nwIpxFwdCounters 11 }
|
|
|
|
nwIpxFwdCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been received, system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 12 }
|
|
|
|
nwIpxFwdCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been transmitted, system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 13 }
|
|
|
|
nwIpxFwdCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been forwarded, system-wide, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 14 }
|
|
nwIpxFwdCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been administratively filtered, system-wide, during
|
|
nwIpxFwd-CtrOperationalTime."
|
|
::= { nwIpxFwdCounters 15 }
|
|
|
|
nwIpxFwdCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been discarded, system-wide during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 16 }
|
|
|
|
nwIpxFwdCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been successfully
|
|
delivered to the local host, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 17 }
|
|
|
|
nwIpxFwdCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been transmitted
|
|
by the local host, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 18 }
|
|
|
|
nwIpxFwdCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
by the local host, during nwIpxFwdCtrOperationalTime, due to a lack of
|
|
host resources."
|
|
::= { nwIpxFwdCounters 19 }
|
|
|
|
nwIpxFwdCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been received by the local host, during nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 20 }
|
|
|
|
nwIpxFwdCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been transmitted by the local host, during
|
|
nwIpxFwdCtrOperationalTime."
|
|
::= { nwIpxFwdCounters 21 }
|
|
|
|
nwIpxFwdCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been discarded by the local host, during nwIpxFwdCtrOperationalTime
|
|
due to a lack of host resources."
|
|
::= { nwIpxFwdCounters 22 }
|
|
|
|
|
|
-- IPX Forwarding Interface Table
|
|
-- This table contains the managed objects used to set-up and configure
|
|
-- each router port.
|
|
nwIpxFwdIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwIpxFwdIfIndex, which indicates the value of MIB2
|
|
ifIndex, which identifies the router port for which the entry exists."
|
|
::= { nwIpxFwdIfConfig 1 }
|
|
|
|
nwIpxFwdIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the IPX Routing Services configuration for the
|
|
router port for which the entry exists."
|
|
INDEX { nwIpxFwdIfIndex }
|
|
::= { nwIpxFwdIfTable 1 }
|
|
|
|
NwIpxFwdIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxFwdIfIndex INTEGER,
|
|
nwIpxFwdIfAdminStatus INTEGER,
|
|
nwIpxFwdIfOperStatus INTEGER,
|
|
nwIpxFwdIfOperationalTime TimeTicks,
|
|
nwIpxFwdIfControl INTEGER,
|
|
nwIpxFwdIfMtu INTEGER,
|
|
nwIpxFwdIfForwarding INTEGER,
|
|
nwIpxFwdIfFrameType INTEGER,
|
|
nwIpxFwdIfAclIdentifier INTEGER,
|
|
nwIpxFwdIfAclStatus INTEGER,
|
|
nwIpxFwdIfCacheControl INTEGER,
|
|
nwIpxFwdIfCacheEntries Counter,
|
|
nwIpxFwdIfCacheHits Counter,
|
|
nwIpxFwdIfCacheMisses Counter
|
|
}
|
|
|
|
nwIpxFwdIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfEntry 1 }
|
|
|
|
nwIpxFwdIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX Routing Services on the router
|
|
port for which the entry exists. Enabled (3) causes IPX Routing
|
|
Services to become active. Disabled (2) causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxFwdIfEntry 2 }
|
|
|
|
nwIpxFwdIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of IPX Routing Services on
|
|
the router port for which the entry exists. The value of
|
|
nwIpxFwdIfOperStatus indicates any problem with the configuration of
|
|
IPX Routing Services on the router port. A value of 6 indicates that
|
|
regardless of the state of nwIpxFwdIfAdminStatus IPX Routing Services
|
|
is not operating because of an invalid port-level configuration."
|
|
::= { nwIpxFwdIfEntry 3 }
|
|
|
|
nwIpxFwdIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxFwdIfOperStatus has been in its current state."
|
|
::= { nwIpxFwdIfEntry 4 }
|
|
|
|
nwIpxFwdIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
add(2),
|
|
delete(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { delete }
|
|
::= { nwIpxFwdIfEntry 5 }
|
|
|
|
nwIpxFwdIfMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Maximum Transmission Unit (MTU) for IPX packets on the
|
|
router port for which the entry exists. This includes the IPX header
|
|
and data but does not include framing."
|
|
DEFVAL { 1500 }
|
|
::= { nwIpxFwdIfEntry 6 }
|
|
|
|
nwIpxFwdIfForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls forwarding of IPX packets on the router port for which the
|
|
entry exists. Enabled (3) causes IPX packets to be forwarded. Disabled
|
|
(2) prevents IPX packets from being forwarded."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxFwdIfEntry 7 }
|
|
|
|
nwIpxFwdIfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- enet,fddi,and token ring
|
|
i8022(4), -- enet, token ring, and fddi
|
|
novell(6), -- ethernet and fddi
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenet8022(10), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encapenetnovell(12), -- wan media types
|
|
encaptr8022(13), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddi8022(15), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type for IPX packets forwarded on the router
|
|
port for which the entry exists. Some frame types are valid for
|
|
specific media types. The comments reflect those valid media types."
|
|
DEFVAL { i8022 }
|
|
::= { nwIpxFwdIfEntry 8 }
|
|
|
|
nwIpxFwdIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the Access Control List in effect
|
|
for IPX packets being routed on the router port for which the entry
|
|
exists. A value of 0 indicates that no Access Control List is in
|
|
effect."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxFwdIfEntry 9 }
|
|
|
|
nwIpxFwdIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of any Access Control List configured for IPX
|
|
traffic on the router port for which the entry exists. Enabled (3)
|
|
applies the Access Control List indicated by the value of
|
|
nwIpxFwdIfAclIdentifier to all IPX traffic being routed to the port.
|
|
Disabled (2) prevents the Access Control List from being applied."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxFwdIfEntry 10 }
|
|
|
|
nwIpxFwdIfCacheControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls IPX Address caching on the router port for which the entry
|
|
exists. When IPX Address caching is enabled, IPX Addresses used for
|
|
address validation, filtering, and forwarding are stored in the cache.
|
|
This cache is checked first before doing a full route table lookup,
|
|
which speeds up the switching process. Enabled (3) turns on IPX
|
|
Address caching. Disabled (2) turns it off."
|
|
DEFVAL { enable }
|
|
::= { nwIpxFwdIfEntry 11 }
|
|
|
|
nwIpxFwdIfCacheEntries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of entries in the IPX Address cache on the router port for which the entry exists."
|
|
::= { nwIpxFwdIfEntry 12 }
|
|
|
|
nwIpxFwdIfCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times entries in the IPX Adddress cache have
|
|
been used to provide the IPX Address required to validate, filter, or
|
|
forward an IPX packet on the router port."
|
|
::= { nwIpxFwdIfEntry 13 }
|
|
|
|
nwIpxFwdIfCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times the IPX Address required to validate,
|
|
filter, or forward an IPX packet on the router port was not found in
|
|
the IPX Address cache."
|
|
::= { nwIpxFwdIfEntry 14 }
|
|
|
|
|
|
-- The IPX Interface Address Table
|
|
-- This table contains the managed object used to setup and configure
|
|
-- IPX addresses on a per router port basis.
|
|
nwIpxAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each Novell network address assigned
|
|
to each router port."
|
|
::= { nwIpxFwdIfConfig 2 }
|
|
|
|
nwIpxAddrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the Novell network addressing information for
|
|
the logical Novll network for which the entry exists."
|
|
INDEX { nwIpxAddrIfIndex, nwIpxAddrIfAddress }
|
|
::= { nwIpxAddressTable 1 }
|
|
|
|
NwIpxAddrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxAddrIfIndex INTEGER,
|
|
nwIpxAddrIfAddress IpxAddress,
|
|
nwIpxAddrIfControl INTEGER,
|
|
nwIpxAddrIfAddrType INTEGER
|
|
}
|
|
|
|
nwIpxAddrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxAddrEntry 1 }
|
|
|
|
nwIpxAddrIfAddress OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the Novell network number assigned to the logical Novell
|
|
network for which the entry exists. The IpxAddress consists of a
|
|
network number of 4 octets."
|
|
::= { nwIpxAddrEntry 2 }
|
|
|
|
nwIpxAddrIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
add(2),
|
|
delete(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this object to add or delete this entry from the table."
|
|
DEFVAL { add }
|
|
::= { nwIpxAddrEntry 3 }
|
|
|
|
nwIpxAddrIfAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
primary(2),
|
|
secondary(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the Novell network number, nwIpxAddrIfAddress, is
|
|
the primary or secondary address for the router port."
|
|
DEFVAL { primary }
|
|
::= { nwIpxAddrEntry 4 }
|
|
|
|
|
|
-- IPX Forwarding Interfaces Counter Table
|
|
-- This table contains the objects that specify the packet and byte counters
|
|
-- for each configured IPX router port.
|
|
nwIpxFwdIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured and
|
|
enabled for IPX Routing Services."
|
|
::= { nwIpxFwdIfCounters 1 }
|
|
|
|
nwIpxFwdIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of IPX packets
|
|
on the port for which the entry exists."
|
|
INDEX { nwIpxFwdIfCtrIfIndex }
|
|
::= { nwIpxFwdIfCtrTable 1 }
|
|
|
|
NwIpxFwdIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxFwdIfCtrIfIndex INTEGER,
|
|
nwIpxFwdIfCtrAdminStatus INTEGER,
|
|
nwIpxFwdIfCtrReset INTEGER,
|
|
nwIpxFwdIfCtrOperationalTime TimeTicks,
|
|
nwIpxFwdIfCtrInPkts Counter,
|
|
nwIpxFwdIfCtrOutPkts Counter,
|
|
nwIpxFwdIfCtrFwdPkts Counter,
|
|
nwIpxFwdIfCtrFilteredPkts Counter,
|
|
nwIpxFwdIfCtrDiscardPkts Counter,
|
|
nwIpxFwdIfCtrAddrErrPkts Counter,
|
|
nwIpxFwdIfCtrLenErrPkts Counter,
|
|
nwIpxFwdIfCtrHdrErrPkts Counter,
|
|
nwIpxFwdIfCtrInBytes Counter,
|
|
nwIpxFwdIfCtrOutBytes Counter,
|
|
nwIpxFwdIfCtrFwdBytes Counter,
|
|
nwIpxFwdIfCtrFilteredBytes Counter,
|
|
nwIpxFwdIfCtrDiscardBytes Counter,
|
|
nwIpxFwdIfCtrHostInPkts Counter,
|
|
nwIpxFwdIfCtrHostOutPkts Counter,
|
|
nwIpxFwdIfCtrHostDiscardPkts Counter,
|
|
nwIpxFwdIfCtrHostInBytes Counter,
|
|
nwIpxFwdIfCtrHostOutBytes Counter,
|
|
nwIpxFwdIfCtrHostDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxFwdIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 1 }
|
|
|
|
nwIpxFwdIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port IPX packet and byte
|
|
counters on the router port for which the entry exists. Enabled (3)
|
|
causes these counters to become active. Disabled (2) causes these
|
|
counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxFwdIfCtrEntry 2 }
|
|
|
|
nwIpxFwdIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port IPX packet and byte counters on the router port
|
|
for which this entry exists. Reset (2) resets the counters to 0.
|
|
nwIpxFwdIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpxFwdIfCtrEntry 3 }
|
|
|
|
nwIpxFwdIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxFwdIfCtrAdminStatus has been in the current state."
|
|
::= { nwIpxFwdIfCtrEntry 4 }
|
|
|
|
nwIpxFwdIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been received,
|
|
during nwIpxFwdIfCtrOperationaltime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 5 }
|
|
|
|
nwIpxFwdIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been transmitted,
|
|
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 6 }
|
|
|
|
nwIpxFwdIfCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been forwarded,
|
|
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 7 }
|
|
|
|
nwIpxFwdIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been
|
|
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 8 }
|
|
|
|
nwIpxFwdIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
(dropped), during nwIpxFwdIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 9 }
|
|
|
|
nwIpxFwdIfCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
because of IPX addressing errors in the IPX header, during
|
|
nwIpxFwdIfCtrOperationalTime, on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxFwdIfCtrEntry 10 }
|
|
|
|
nwIpxFwdIfCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
because an invalid packet length was contained in the IPX header,
|
|
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 11 }
|
|
|
|
nwIpxFwdIfCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
because of an invalid IPX header, during nwIpxFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 12 }
|
|
|
|
nwIpxFwdIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been received, during nwIpxFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 13 }
|
|
|
|
nwIpxFwdIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been transmitted, during nwIpxFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 14 }
|
|
|
|
nwIpxFwdIfCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been forwarded, during nwIpxFwdCtrOperationalTime, on the router port
|
|
for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 15 }
|
|
|
|
nwIpxFwdIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets
|
|
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 16 }
|
|
|
|
nwIpxFwdIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been discarded, during nwIpxFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 17 }
|
|
|
|
nwIpxFwdIfCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been successfully
|
|
delivered to the local host, during nwIpxFwdIfCtrOperationalTime, that
|
|
were received on the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 18 }
|
|
|
|
nwIpxFwdIfCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been forwarded
|
|
by the local host, during nwIpxFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 19 }
|
|
|
|
nwIpxFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX packets that have been discarded
|
|
by the local host, due to a lack of host resources, during
|
|
nwIpxFwdIfCtrOperationalTime, that were received on the router port
|
|
for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 20 }
|
|
|
|
nwIpxFwdIfCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have been
|
|
successfully delivered to the local host, during
|
|
nwIpxFwdIfCtrOperationalTime, that were received on the router port for
|
|
which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 21 }
|
|
|
|
nwIpxFwdIfCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have been
|
|
transmitted by the local host, during nwIpxFwdIfCtrOperationalTime, on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 22 }
|
|
|
|
nwIpxFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX packets that have
|
|
been discarded by the local host, due to a lack of host resources
|
|
that were received, during nwIpxFwdIfCtrOperationalTime, that were
|
|
received on the router port for which the entry exists."
|
|
::= { nwIpxFwdIfCtrEntry 23 }
|
|
|
|
|
|
-- DistanceVector-based Protocols
|
|
-- This group contains the managed objects for RIP, IPX DistanceVector based
|
|
-- routing.
|
|
|
|
-- IPX RIP System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IPX RIP DistanceVector based routing protocol.
|
|
|
|
nwIpxRipAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX-RIP routing protocol
|
|
system-wide. Enabled (3) causes IPX-RIP to become active on all router
|
|
ports configured and enabled for IPX Routing Services. Disabled (2)
|
|
causes IPX-RIP to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxRipConfig 1 }
|
|
|
|
nwIpxRipOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of IPX-RIP system-wide.
|
|
The value of nwIpxRipOperStatus indicates any problem with your
|
|
IPX-RIP configuration. A value of 6 indicates that regardless of the
|
|
value of nwIpxRipAdminStatus, IPX-RIP is not operating because of an
|
|
invalid configuration."
|
|
::= { nwIpxRipConfig 2 }
|
|
|
|
nwIpxRipAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the IPX-RIP routing protocol. Reset (2) forces a system-wide
|
|
restart of IPX-RIP, without a graceful shutdown on any active router
|
|
ports."
|
|
DEFVAL { other }
|
|
::= { nwIpxRipConfig 3 }
|
|
|
|
nwIpxRipOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxRipOperStatus has been in its current state."
|
|
::= { nwIpxRipConfig 4 }
|
|
|
|
nwIpxRipVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the IPX-RIP routing protocol
|
|
firmware, in textual format."
|
|
::= { nwIpxRipConfig 5 }
|
|
|
|
nwIpxRipStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the IPX-RIP routing protocol thread. In
|
|
order for a change of this value to take effect, the protocol
|
|
(nwIpxRipAdminReset), IPX Routing Services (nwIpxSysAdminReset), or
|
|
the device running Routing Services must be reset."
|
|
DEFVAL { 4096 }
|
|
::= { nwIpxRipConfig 6 }
|
|
|
|
nwIpxRipThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the IPX-RIP routing
|
|
protocol thread. In order for a change of this value to take effect,
|
|
IPX-RIP (nwIpxRipAdminReset), IPX Routing Services (nwIpxAdminReset),
|
|
or the device running Routing services must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwIpxRipConfig 7 }
|
|
|
|
nwIpxRipDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time maximum number of IPX-RIP entries that can
|
|
be held in the IPX-RIP route table."
|
|
DEFVAL { 2000 }
|
|
::= { nwIpxRipConfig 8 }
|
|
|
|
nwIpxRipAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time, in seconds, that an inactive route
|
|
table entry remains in the IPX-RIP route table before it is aged-out."
|
|
DEFVAL { 180 }
|
|
::= { nwIpxRipConfig 9 }
|
|
|
|
nwIpxRipHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time, in seconds, to wait before removing
|
|
an entry from the route table, after receiving an update indicating
|
|
that the destination has become unreachable. All routers exchanging
|
|
IPX-RIP information must have the same hold down time. The time must
|
|
be long enough to allow all participating routers to receive the same
|
|
update."
|
|
DEFVAL { 120 }
|
|
::= { nwIpxRipConfig 10 }
|
|
|
|
|
|
-- IPX RIP System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IPX RIP packet and
|
|
-- byte counters.
|
|
nwIpxRipCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate system-wide IPX-RIP
|
|
packet and byte counters. Enabled (3) causes these counters to become
|
|
active on all router ports. Disabled (2) causes these counters to
|
|
become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxRipCounters 1 }
|
|
|
|
nwIpxRipCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate system-wide IPX-RIP protocol packet and byte
|
|
counters. Reset (2) resets the IPX-RIP aggregate counters to 0.
|
|
nwIpxRipCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpxRipCounters 2 }
|
|
|
|
nwIpxRipCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxRipCtrAdminStatus has been in the current state."
|
|
::= { nwIpxRipCounters 3 }
|
|
|
|
nwIpxRipCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP packets that have been
|
|
received, system-wide, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 4 }
|
|
|
|
nwIpxRipCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP packets that have been
|
|
transmitted, system-wide, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 5 }
|
|
|
|
nwIpxRipCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP packets that have been
|
|
administratively filtered, system-wide, during`
|
|
nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 6 }
|
|
|
|
nwIpxRipCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP packets that have been
|
|
discarded, system-wide, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 7 }
|
|
|
|
nwIpxRipCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP packets that
|
|
have been received, system-wide, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 8 }
|
|
|
|
nwIpxRipCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP packets that have
|
|
been transmitted, system-wide, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 9 }
|
|
|
|
nwIpxRipCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP packets that have
|
|
been administratively filtered, system-wide, during
|
|
nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 10 }
|
|
|
|
nwIpxRipCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP packets that have
|
|
been discarded, during nwIpxRipCtrOperationalTime."
|
|
::= { nwIpxRipCounters 11 }
|
|
|
|
|
|
-- IPX RIP Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- RIP on a per router port basis.
|
|
nwIpxRipIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxRipIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each entry can
|
|
contain different values, allowing the routing protocol configuration
|
|
to vary from router port to router port. This table is indexed by
|
|
nwIpxRipIfIndex, which indicates the value of MIB 2 ifindex, which
|
|
identifies the router port for which each entry exists."
|
|
::= { nwIpxRipIfConfig 1 }
|
|
|
|
nwIpxRipIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxRipIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the IPX-RIP configuration for the router port for
|
|
which the entry exists."
|
|
INDEX { nwIpxRipIfIndex }
|
|
::= { nwIpxRipIfTable 1 }
|
|
|
|
NwIpxRipIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxRipIfIndex INTEGER,
|
|
nwIpxRipIfAdminStatus INTEGER,
|
|
nwIpxRipIfOperStatus INTEGER,
|
|
nwIpxRipIfOperationalTime TimeTicks,
|
|
nwIpxRipIfVersion INTEGER,
|
|
nwIpxRipIfAdvertisement INTEGER,
|
|
nwIpxRipIfFloodDelay INTEGER,
|
|
nwIpxRipIfRequestDelay INTEGER,
|
|
nwIpxRipIfPriority INTEGER,
|
|
nwIpxRipIfHelloTimer INTEGER,
|
|
nwIpxRipIfSplitHorizon INTEGER,
|
|
nwIpxRipIfPoisonReverse INTEGER,
|
|
nwIpxRipIfSnooping INTEGER,
|
|
nwIpxRipIfType INTEGER,
|
|
nwIpxRipIfXmitCost INTEGER,
|
|
nwIpxRipIfAclIdentifier INTEGER,
|
|
nwIpxRipIfAclStatus INTEGER
|
|
}
|
|
|
|
nwIpxRipIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxRipIfEntry 1 }
|
|
|
|
nwIpxRipIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX-RIP routing protocol on the
|
|
router port for which the entry exists. Enabled (3) causes IPX-RIP to
|
|
become active on the router port. Disabled (2) causes RIP to become
|
|
inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxRipIfEntry 2 }
|
|
|
|
nwIpxRipIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the IPX-RIP routing
|
|
protocol on the router port for which the entry exists. The value of
|
|
nwIpxRipIfOperStatus indicates any problem with your IPX-RIP
|
|
configuration on the router port. A value of 6 indicates that
|
|
regardless of the value of nwIpxRipIfAdminStatus, IPX-RIP is not
|
|
operating on the router port because of an invalid configuration."
|
|
::= { nwIpxRipIfEntry 3 }
|
|
|
|
nwIpxRipIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxRipIfOperStatus has been in its current state."
|
|
::= { nwIpxRipIfEntry 4 }
|
|
|
|
nwIpxRipIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of the IPX-RIP routing protocol in
|
|
textual format."
|
|
DEFVAL { 1 }
|
|
::= { nwIpxRipIfEntry 5 }
|
|
|
|
nwIpxRipIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which IPX-RIP advertises its route
|
|
table on the router port for which the entry exists. Change this value
|
|
to cause IPX-RIP to advertise its route table more or less frequently."
|
|
DEFVAL { 60 }
|
|
::= { nwIpxRipIfEntry 6 }
|
|
|
|
nwIpxRipIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the length of time, in seconds, that the IPX-RIP routing
|
|
protocol will wait after discovering that a directly connected route
|
|
has gone down, before flooding updates (triggered updates) on the
|
|
router port for which the entry exists. A value of 0 specifies that
|
|
if a directly connected route goes down, updates will be sent
|
|
immediately."
|
|
DEFVAL { 2 }
|
|
::= { nwIpxRipIfEntry 7 }
|
|
|
|
nwIpxRipIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the length of time, in seconds, that the IPX-RIP routing
|
|
protocol will wait after receiving a route request packet before
|
|
sending a response on the router port for which the entry exists. A
|
|
value of 0 specifies that if a route request packet is received on
|
|
the port, a response will be sent immediately."
|
|
DEFVAL { 6 }
|
|
::= { nwIpxRipIfEntry 8 }
|
|
|
|
nwIpxRipIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 1 }
|
|
::= { nwIpxRipIfEntry 9 }
|
|
|
|
nwIpxRipIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 10 }
|
|
::= { nwIpxRipIfEntry 10 }
|
|
|
|
nwIpxRipIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of Split Horizon on the router port for which
|
|
the entry exists. When Split Horizon is enabled, IPX-RIP keeps track
|
|
of which router port route information is received on, and prevents
|
|
information about a route from being sent back out the same router
|
|
port it was received on."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxRipIfEntry 11 }
|
|
|
|
nwIpxRipIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of Poison Reverse on the router port for
|
|
which the entry exists. When Poison Reverse is enabled, IPX-RIP
|
|
advertises any downed route as unreachable during the period of time
|
|
that it must wait (nwIpxRipHoldDown) before removing the route from
|
|
the route table."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxRipIfEntry 12 }
|
|
|
|
nwIpxRipIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of IPX-RIP Snooping on the router port. When
|
|
RIP Snooping is enabled the IPX-RIP routing protocol operates in
|
|
passive mode, so that it receives route information, builds and
|
|
maintains a route table, but does not advertise or send updates on
|
|
the router port for which the entry exists."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxRipIfEntry 13 }
|
|
|
|
nwIpxRipIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bma(2),
|
|
nbma(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network segment does or
|
|
does not support broadcast media access. If broadcast media access is
|
|
supported, IPX-RIP advertisements are sent out one broadcast packet
|
|
per router port. If broadcast media access is not supported, IPX-RIP
|
|
advertisements are sent to each neighbor directly."
|
|
DEFVAL { bma }
|
|
::= { nwIpxRipIfEntry 14 }
|
|
|
|
nwIpxRipIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the common MIB framework used to provide a common
|
|
management interface to all the Cabletron Routing Services
|
|
protocol-specific MIBs. Setting this object has no effect."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxRipIfEntry 15 }
|
|
|
|
nwIpxRipIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control list in effect
|
|
for IPX-RIP routing protocol packets on the router port for which the
|
|
entry exists. A value of 0 indicates that there is no access control
|
|
list in effect for IPX-RIP routing protocol packets on the router
|
|
port."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxRipIfEntry 16 }
|
|
|
|
nwIpxRipIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list identified by
|
|
nwIpxRipIfAclIdentifier. Enabled (3) applies the access control list
|
|
to all IPX-RIP routing protocol packet traffic on the router port for
|
|
which the entry exists. Disabled (2) prevents the access control list
|
|
from being applied. "
|
|
DEFVAL { disabled }
|
|
::= { nwIpxRipIfEntry 17 }
|
|
|
|
-- IPX RIP Interface Counters Table
|
|
-- This table contains the managed objects for IPX RIP packet and byte
|
|
-- counter on a per router port basis.
|
|
nwIpxRipIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxRipIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port.This table is
|
|
indexed by nwIpxRipIfCtrIfIndex, which indicates the value of MIB2
|
|
ifindex, which indentifies the router port for which the entry exists."
|
|
::= { nwIpxRipIfCounters 1 }
|
|
|
|
nwIpxRipIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxRipIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of IPX-RIP
|
|
routing protocol packets on the router port for which the entry
|
|
exists."
|
|
INDEX { nwIpxRipIfCtrIfIndex }
|
|
::= { nwIpxRipIfCtrTable 1 }
|
|
|
|
NwIpxRipIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxRipIfCtrIfIndex INTEGER,
|
|
nwIpxRipIfCtrAdminStatus INTEGER,
|
|
nwIpxRipIfCtrReset INTEGER,
|
|
nwIpxRipIfCtrOperationalTime TimeTicks,
|
|
nwIpxRipIfCtrInPkts Counter,
|
|
nwIpxRipIfCtrOutPkts Counter,
|
|
nwIpxRipIfCtrFilteredPkts Counter,
|
|
nwIpxRipIfCtrDiscardPkts Counter,
|
|
nwIpxRipIfCtrInBytes Counter,
|
|
nwIpxRipIfCtrOutBytes Counter,
|
|
nwIpxRipIfCtrFilteredBytes Counter,
|
|
nwIpxRipIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxRipIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 1 }
|
|
|
|
nwIpxRipIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port IPX-RIP packet and
|
|
byte counters on the router port for which the entry exists.
|
|
Enabled (3) causes these counters to become active. Disabled (2)
|
|
causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxRipIfCtrEntry 2 }
|
|
|
|
nwIpxRipIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port IPX-RIP packet and byte counters on the router
|
|
port for which this entry exists. Reset (2) resets the counters to 0.
|
|
nwIpxRipIfCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxRipIfCtrEntry 3 }
|
|
|
|
nwIpxRipIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpRipIfCtrAdminStatus has been in the current state."
|
|
::= { nwIpxRipIfCtrEntry 4 }
|
|
|
|
nwIpxRipIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP routing protocol packets that
|
|
have been received, during nwIpxRipIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 5 }
|
|
|
|
nwIpxRipIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP routing protocol packets that
|
|
have been transmitted, during nwIpxRipIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 6 }
|
|
|
|
nwIpxRipIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP routing protocol packets that
|
|
have been administratively filtered, during
|
|
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxRipIfCtrEntry 7 }
|
|
|
|
nwIpxRipIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX-RIP routing protocol packets that
|
|
have been discarded, during nwIpxRipIfCtrOperationalTime, that were
|
|
received on the router port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 8 }
|
|
|
|
nwIpxRipIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP routing protocol
|
|
packets that have been received, during nwIpxRipIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 9 }
|
|
|
|
nwIpxRipIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP routing protocol
|
|
packets that have been transmitted, during
|
|
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxRipIfCtrEntry 10 }
|
|
|
|
nwIpxRipIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP routing protocol
|
|
packets that have been administratively filtered, during
|
|
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxRipIfCtrEntry 11 }
|
|
|
|
nwIpxRipIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX-RIP routing protocol
|
|
packets that have been discarded, during nwIpRipIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwIpxRipIfCtrEntry 12 }
|
|
|
|
|
|
-- IPX RIP Routing Table
|
|
-- This table contains the managed objects for IPX RIP route table.
|
|
nwIpxRipRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxRipRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the IPX-RIP route table. This table contains an
|
|
entry for each route learned through the IPX-RIP routing protocol.
|
|
Only the best routes from this table are added to the IPX forwarding
|
|
table to be used for packet switching."
|
|
::= { nwIpxRipDatabase 1 }
|
|
|
|
nwIpxRipRouteEntry OBJECT-TYPE
|
|
SYNTAX NwIpxRipRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes the IPX-RIP route to the destination network
|
|
for which the entry exists."
|
|
INDEX { nwIpxRipRtNetId, nwIpxRipRtIfIndex, nwIpxRipRtSrcNode }
|
|
::= { nwIpxRipRouteTable 1 }
|
|
|
|
NwIpxRipRouteEntry ::=
|
|
SEQUENCE {
|
|
nwIpxRipRtNetId IpxAddress,
|
|
nwIpxRipRtIfIndex INTEGER,
|
|
nwIpxRipRtSrcNode IpxAddress,
|
|
nwIpxRipRtHops INTEGER,
|
|
nwIpxRipRtTicks INTEGER,
|
|
nwIpxRipRtAge INTEGER,
|
|
nwIpxRipRtType INTEGER,
|
|
nwIpxRipRtFlags INTEGER
|
|
}
|
|
|
|
nwIpxRipRtNetId OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the IPX-RIP route table. This number
|
|
indicates the Novell Network Number of the destination for which the
|
|
entry exists. The IpxAddress consists of a network number of 4 octets"
|
|
|
|
::= { nwIpxRipRouteEntry 1 }
|
|
|
|
nwIpxRipRtIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the IPX-RIP route table. This number
|
|
corresponds to the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxRipRouteEntry 2 }
|
|
|
|
nwIpxRipRtSrcNode OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the RIP route table. This number
|
|
indicates the MAC-layer address of the source router from which this
|
|
route was learned. A value of 0.0.0.0.0.0 indicates that the source
|
|
is on the network segment directly connected to the router port,
|
|
nwIpxRipRtIfIndex."
|
|
::= { nwIpxRipRouteEntry 3 }
|
|
|
|
nwIpxRipRtHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of hops required to reach the destination for
|
|
which the entry exists."
|
|
::= { nwIpxRipRouteEntry 4 }
|
|
|
|
|
|
nwIpxRipRtTicks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (number of Time Ticks) required to
|
|
reach the destination for which the entry exists."
|
|
::= { nwIpxRipRouteEntry 5 }
|
|
|
|
nwIpxRipRtAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in seconds, since an update has been
|
|
received for the route for which the entry exists."
|
|
::= { nwIpxRipRouteEntry 6 }
|
|
|
|
nwIpxRipRtType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
direct(3),
|
|
remote(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the destination network is directly connected
|
|
through the router port specified by nwIpxRipRtIndex, or is
|
|
indirectly connected through another router, specified by
|
|
nwIpxRipRtSrcNode."
|
|
::= { nwIpxRipRouteEntry 7 }
|
|
|
|
nwIpxRipRtFlags OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies properties of the IPX-RIP route. The bit mask is as
|
|
follows: source-changed (1), best source (2), local-net (4),
|
|
net-down (8), update-fib-only (16)."
|
|
::= { nwIpxRipRouteEntry 8 }
|
|
|
|
|
|
|
|
-- IPX SAP System Group
|
|
-- This group contains the managed object for global, device-wide
|
|
-- IPX SAP DistanceVector based routing protocol.
|
|
|
|
-- IPX SAP System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IPX SAP DistanceVector based routing protocol.
|
|
nwIpxSapAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the SAP protocol system-wide.
|
|
Enabled (3) causes SAP to become active on all router ports
|
|
configured and enabled for IPX routing services. Disabled (2) causes
|
|
the protocol to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSapConfig 1 }
|
|
|
|
nwIpxSapOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the SAP protocol
|
|
system-wide. The value of nwIpxSapOperStatus indicates any problem
|
|
with your SAP configuration. A value of 6 indicates that regardless
|
|
of the value of nwIpxSAPAdminStatus, the SAP protocol is not operating
|
|
because of an invalid configuration."
|
|
::= { nwIpxSapConfig 2 }
|
|
|
|
nwIpxSapAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the SAP protocol. Reset (2) forces a system-wide restart of
|
|
SAP, without a graceful shutdown on any active router ports."
|
|
DEFVAL { other }
|
|
::= { nwIpxSapConfig 3 }
|
|
|
|
nwIpxSapOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxSapOperStatus, has been in its current state."
|
|
::= { nwIpxSapConfig 4 }
|
|
|
|
nwIpxSapVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the SAP protocol firmware, in
|
|
textual format."
|
|
::= { nwIpxSapConfig 5 }
|
|
|
|
nwIpxSapStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the SAP protocol thread. In order for a
|
|
change to this value to take effect, the protocol (nwIpxSapAdminReset),
|
|
IPX Routing Services (nwIpxSysAdminReset), or the device running
|
|
Routing Services must be reset."
|
|
DEFVAL { 4096 }
|
|
::= { nwIpxSapConfig 6 }
|
|
|
|
nwIpxSapThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the SAP protocol
|
|
thread. In order for a change to this value to take effect, SAP
|
|
(nwIpxSapAdminReset), IPX Routing Services (nwIpxAdminReset), or the
|
|
device running Routing Services must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwIpxSapConfig 7 }
|
|
|
|
nwIpxSapDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time maximum number of entries that can be held in
|
|
the SAP server table."
|
|
DEFVAL { 2000 }
|
|
::= { nwIpxSapConfig 8 }
|
|
|
|
nwIpxSapAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time, in seconds, that an inactive server
|
|
table entry remains in the SAP server table before it is aged out."
|
|
DEFVAL { 180 }
|
|
::= { nwIpxSapConfig 9 }
|
|
|
|
nwIpxSapHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time, in seconds, to wait before removing an
|
|
entry from the SAP server table, after receiving an update indicating
|
|
that the destination has become unreachable. All routers exchanging
|
|
SAP information must have the same hold down time. The time must be
|
|
long enough to allow all participating routers to receive the same
|
|
update."
|
|
DEFVAL { 120 }
|
|
::= { nwIpxSapConfig 10 }
|
|
|
|
|
|
-- IPX SAP System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IPX SAP packet and
|
|
-- byte counters.
|
|
nwIpxSapCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide) SAP
|
|
protocol packet and byte counters. Enabled (3) causes these counters
|
|
to become active on all router ports. Disabled (2) causes these
|
|
counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxSapCounters 1 }
|
|
|
|
nwIpxSapCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) SAP protocol packet and byte
|
|
counters. Reset (2) resets the SAP aggregate counters to 0.
|
|
nwIpxSapCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpxSapCounters 2 }
|
|
|
|
nwIpxSapCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxSapCtrAdminStatus, has been in the current state."
|
|
::= { nwIpxSapCounters 3 }
|
|
|
|
nwIpxSapCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been received,
|
|
system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 4 }
|
|
|
|
nwIpxSapCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been transmitted,
|
|
system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 5 }
|
|
|
|
nwIpxSapCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 6 }
|
|
|
|
nwIpxSapCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been discarded,
|
|
system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 7 }
|
|
|
|
nwIpxSapCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have been
|
|
received, system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 8 }
|
|
|
|
nwIpxSapCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have
|
|
been transmitted, system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 9 }
|
|
|
|
nwIpxSapCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have
|
|
been administratively filtered, system-wide, during
|
|
nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 10 }
|
|
|
|
nwIpxSapCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have
|
|
been discarded system-wide, during nwIpxSapCtrOperationalTime."
|
|
::= { nwIpxSapCounters 11 }
|
|
|
|
|
|
-- IPX SAP Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- SAP on a per router port basis.
|
|
nwIpxSapIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxSapIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each entry can
|
|
contain different values, allowing the SAP configuration to vary from
|
|
router port to router port. This table is indexed by nwIpxSapIfIndex,
|
|
which indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which each entry exists."
|
|
::= { nwIpxSapIfConfig 1 }
|
|
|
|
nwIpxSapIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxSapIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the SAP configuration for the router port for
|
|
which the entry exists."
|
|
INDEX { nwIpxSapIfIndex }
|
|
::= { nwIpxSapIfTable 1 }
|
|
|
|
NwIpxSapIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxSapIfIndex INTEGER,
|
|
nwIpxSapIfAdminStatus INTEGER,
|
|
nwIpxSapIfOperStatus INTEGER,
|
|
nwIpxSapIfOperationalTime TimeTicks,
|
|
nwIpxSapIfVersion INTEGER,
|
|
nwIpxSapIfAdvertisement INTEGER,
|
|
nwIpxSapIfFloodDelay INTEGER,
|
|
nwIpxSapIfRequestDelay INTEGER,
|
|
nwIpxSapIfPriority INTEGER,
|
|
nwIpxSapIfHelloTimer INTEGER,
|
|
nwIpxSapIfSplitHorizon INTEGER,
|
|
nwIpxSapIfPoisonReverse INTEGER,
|
|
nwIpxSapIfSnooping INTEGER,
|
|
nwIpxSapIfType INTEGER,
|
|
nwIpxSapIfXmitCost INTEGER,
|
|
nwIpxSapIfAclIdentifier INTEGER,
|
|
nwIpxSapIfAclStatus INTEGER
|
|
}
|
|
|
|
nwIpxSapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxSapIfEntry 1 }
|
|
|
|
nwIpxSapIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the SAP protocol on the router port
|
|
for which the entry exists. Enabled (3) causes SAP to become active
|
|
on the router port. Disabled (2) causes SAP to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSapIfEntry 2 }
|
|
|
|
nwIpxSapIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the SAP protocol on the
|
|
router port for which the entry exists. The value of
|
|
nwIpxSapIfOperStatus indicates any problem with your SAP configuration
|
|
on the router port. A value of 6 indicates that regardless of the
|
|
value of nwIpxSapIfAdminStatus. SAP is not operating because of an
|
|
invalid configuration."
|
|
::= { nwIpxSapIfEntry 3 }
|
|
|
|
nwIpxSapIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxSapIfOperStatus has been in its current state."
|
|
::= { nwIpxSapIfEntry 4 }
|
|
|
|
nwIpxSapIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of the SAP protocol in textual format."
|
|
DEFVAL { 1 }
|
|
::= { nwIpxSapIfEntry 5 }
|
|
|
|
nwIpxSapIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which SAP advertises its server
|
|
table on the router port for which the entry exists. Change this value
|
|
to cause SAP to advertise its server table more or less frequently."
|
|
DEFVAL { 60 }
|
|
::= { nwIpxSapIfEntry 6 }
|
|
|
|
nwIpxSapIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the length of time, in seconds, that the SAP protocol will
|
|
wait after discovering that a directly connected route has gone down,
|
|
before flooding updates (triggered updates) on the router port for
|
|
which the entry exists. A value of 0 specifies that if a directly
|
|
connected route goes down, updates should be sent immediately ."
|
|
DEFVAL { 2 }
|
|
::= { nwIpxSapIfEntry 7 }
|
|
|
|
nwIpxSapIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the length of time, in seconds, that the SAP protocol will
|
|
wait after receiving a server request packet, before sending a
|
|
response on the router port for which the entry exists. A value of 0
|
|
specifies that if a server request packet is received on the port, a
|
|
response will be sent immediately."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxSapIfEntry 8 }
|
|
|
|
nwIpxSapIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 1 }
|
|
::= { nwIpxSapIfEntry 9 }
|
|
|
|
nwIpxSapIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs.Setting this object has no effect."
|
|
DEFVAL { 10 }
|
|
::= { nwIpxSapIfEntry 10 }
|
|
|
|
nwIpxSapIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of Split Horizon on the router port for which
|
|
the entry exists. When Split Horizon is enabled, SAP keeps track of
|
|
which router port information is received on, and prevents information
|
|
about a server from being sent back out the same router port it was
|
|
received on."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxSapIfEntry 11 }
|
|
|
|
nwIpxSapIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of Poison Reverse on the router port for
|
|
which the entry exists. When Poison Reverse is enabled, SAP
|
|
advertises any downed server as unreachable during the period of time
|
|
that it must wait (nwIpxSapIfHoldDown) before removing the server
|
|
from the server table."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSapIfEntry 12 }
|
|
|
|
nwIpxSapIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of SAP Snooping on the router port. When SAP
|
|
Snooping is enabled SAP operates in passive mode, so it receives
|
|
service information, builds and maintains a server table, but does
|
|
not advertise or send updates on the router port for which the entry
|
|
exists. Enabled (3) turns on SAP Snooping. Disabled (2) turns off SAP
|
|
Snooping."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSapIfEntry 13 }
|
|
|
|
nwIpxSapIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bma(2),
|
|
nbma(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network segment does or
|
|
does not support broadcast media access. If broadcast media access is
|
|
supported, SAP advertisements are sent out, one broadcast packet per
|
|
router port. If broadcast media access is not supported, SAP
|
|
advertisements are sent to each neighbor router directly."
|
|
DEFVAL { bma }
|
|
::= { nwIpxSapIfEntry 14 }
|
|
|
|
nwIpxSapIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxSapIfEntry 15 }
|
|
|
|
nwIpxSapIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control List ID of the access control list in
|
|
effect for SAP protocol packets on the router port for which the entry
|
|
exists. A value of 0 indicates that there is no access control list
|
|
in effect for SAP protocol packets on the router port for which the
|
|
entry exists."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxSapIfEntry 16 }
|
|
|
|
nwIpxSapIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list identified by
|
|
nwIpxSapIfAclIdentifier. Enabled (3) causes the access control list
|
|
to be applied to all SAP protocol packet traffic on the router port
|
|
for which the entry exists. Disabled (2) prevents the access control
|
|
list from being applied."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxSapIfEntry 17 }
|
|
|
|
-- IPX SAP Interface Counters Table
|
|
-- This table contains the managed objects for IPX SAP packet and byte
|
|
-- counter on a per router port basis.
|
|
nwIpxSapIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxSapIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwIpxSapIfCtrIfIndex which indicates the value of MIB2
|
|
ifindex, which indentifies the router port for which the entry
|
|
exists."
|
|
::= { nwIpxSapIfCounters 1 }
|
|
|
|
nwIpxSapIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxSapIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of SAP
|
|
protocol packets on the router port for which the entry exists."
|
|
INDEX { nwIpxSapIfCtrIfIndex }
|
|
::= { nwIpxSapIfCtrTable 1 }
|
|
|
|
NwIpxSapIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxSapIfCtrIfIndex INTEGER,
|
|
nwIpxSapIfCtrAdminStatus INTEGER,
|
|
nwIpxSapIfCtrReset INTEGER,
|
|
nwIpxSapIfCtrOperationalTime TimeTicks,
|
|
nwIpxSapIfCtrInPkts Counter,
|
|
nwIpxSapIfCtrOutPkts Counter,
|
|
nwIpxSapIfCtrFilteredPkts Counter,
|
|
nwIpxSapIfCtrDiscardPkts Counter,
|
|
nwIpxSapIfCtrInBytes Counter,
|
|
nwIpxSapIfCtrOutBytes Counter,
|
|
nwIpxSapIfCtrFilteredBytes Counter,
|
|
nwIpxSapIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxSapIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 1 }
|
|
|
|
nwIpxSapIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port SAP packet and byte
|
|
counters on the router port for which this entry exists. Enabled (3)
|
|
causes these counters to become active. Disabled (2) causes these
|
|
counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxSapIfCtrEntry 2 }
|
|
|
|
nwIpxSapIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port SAP packet and byte counters on the router port
|
|
for which the entry exists. Reset (2) resets the counters to 0.
|
|
nwIpxSapIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpxSapIfCtrEntry 3 }
|
|
|
|
nwIpxSapIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxSapIfCtrAdminStatus has been in the current state."
|
|
::= { nwIpxSapIfCtrEntry 4 }
|
|
|
|
nwIpxSapIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP protocol packets that have been
|
|
received, during nwIpxSapIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 5 }
|
|
|
|
nwIpxSapIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been transmitted,
|
|
during nwIpxSapIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpxSapIfCtrEntry 6 }
|
|
|
|
nwIpxSapIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been
|
|
administratively filtered, during nwIpxSapIfCtrOperationalTime, on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 7 }
|
|
|
|
nwIpxSapIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of SAP packets that have been discarded,
|
|
during nwIpxSapIfCtrOperationalTime, that were received on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 8 }
|
|
|
|
nwIpxSapIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have
|
|
been received, during nwIpxSapIfCtrOperationalTime, on the router port
|
|
for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 9 }
|
|
|
|
nwIpxSapIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have been
|
|
transmitted, during nwIpxSapIfCtrOperationalTime, on the router port
|
|
for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 10 }
|
|
|
|
nwIpxSapIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have been
|
|
administratively filtered, during nwIpxSapIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 11 }
|
|
|
|
nwIpxSapIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the SAP packets that have
|
|
been discarded, during nwIpxSapIfCtrOperationalTime, that were
|
|
received on the router port for which the entry exists."
|
|
::= { nwIpxSapIfCtrEntry 12 }
|
|
|
|
-- IPX SAP Server table Table
|
|
-- This table contains the managed objects for IPX SAP route table.
|
|
nwIpxSapServerIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxSapServerIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table contains the SAP server table. This table contains an entry
|
|
for each service learned of through the SAP protocol."
|
|
::= { nwIpxSapServerTable 1 }
|
|
|
|
nwIpxSapServerIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxSapServerIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the SAP route information for the Novell server
|
|
and router port for which the entry exists."
|
|
INDEX { nwIpxSapServerIfNetId, nwIpxSapServerIfNode,
|
|
nwIpxSapServerIfSocket, nwIpxSapServerIfServiceType,
|
|
nwIpxSapServerIfIfNum, nwIpxSapServerIfSrcNode }
|
|
::= { nwIpxSapServerIfTable 1 }
|
|
|
|
NwIpxSapServerIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxSapServerIfNetId IpxAddress,
|
|
nwIpxSapServerIfNode OCTET STRING,
|
|
nwIpxSapServerIfSocket OCTET STRING,
|
|
nwIpxSapServerIfServiceType INTEGER,
|
|
nwIpxSapServerIfIfNum INTEGER,
|
|
nwIpxSapServerIfSrcNode OCTET STRING,
|
|
nwIpxSapServerIfName OCTET STRING,
|
|
nwIpxSapServerIfHops INTEGER,
|
|
nwIpxSapServerIfAge INTEGER,
|
|
nwIpxSapServerIfType INTEGER,
|
|
nwIpxSapServerIfFlags INTEGER
|
|
}
|
|
nwIpxSapServerIfNetId OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the SAP server table. This number
|
|
corresponds to the Novell Network Number of the server offering the
|
|
service. The network number consists of 4 octets."
|
|
::= { nwIpxSapServerIfEntry 1 }
|
|
|
|
nwIpxSapServerIfNode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the SAP Server Table. This is the
|
|
MAC-layer address represented as an octetstring of the service
|
|
offering the server for which the entry exists, represented as an
|
|
octet string."
|
|
::= { nwIpxSapServerIfEntry 2 }
|
|
|
|
nwIpxSapServerIfSocket OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the SAP Server Table. This is the
|
|
socket number of the server application for which the entry exists."
|
|
::= { nwIpxSapServerIfEntry 3 }
|
|
|
|
nwIpxSapServerIfServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the SAP Server Table. This is the
|
|
service type of the server application for which the entry exists."
|
|
::= { nwIpxSapServerIfEntry 4 }
|
|
|
|
nwIpxSapServerIfIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port through which the service for which the entry exits is available."
|
|
::= { nwIpxSapServerIfEntry 5 }
|
|
|
|
nwIpxSapServerIfSrcNode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the MAC-layer address of the neighbor router from which the
|
|
service was learned about."
|
|
::= { nwIpxSapServerIfEntry 6 }
|
|
|
|
nwIpxSapServerIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the name of the server offering the service for which the
|
|
entry exists."
|
|
::= { nwIpxSapServerIfEntry 7 }
|
|
|
|
nwIpxSapServerIfHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of hops required to reach the server offering
|
|
the service for which the entry exists."
|
|
::= { nwIpxSapServerIfEntry 8 }
|
|
|
|
nwIpxSapServerIfAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time since a SAP update was last received
|
|
for the server and service for which the entry exits."
|
|
::= { nwIpxSapServerIfEntry 9 }
|
|
|
|
nwIpxSapServerIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
direct(3),
|
|
remote(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the server is on a network that is directly
|
|
connected through the router port for which the entry exists, or is
|
|
indirectly connected through another router specified by the value of
|
|
nwIpxSapServerIfSrcNode."
|
|
::= { nwIpxSapServerIfEntry 10 }
|
|
|
|
nwIpxSapServerIfFlags OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies properties of the SAP service for which the entry exist.
|
|
The bit mask is as follows: source-changed (1), best-source (2), not
|
|
used (4), net-down (8), not used (16)."
|
|
::= { nwIpxSapServerIfEntry 11 }
|
|
|
|
|
|
-- IPX Forward Information Base (FIB) Table
|
|
-- This table contains the managed objects for the forwarding table of the
|
|
-- IPX router. This table is built from entries in the IPX routing table(s)
|
|
-- and reflects the routes that are considered the best routes to forward on.
|
|
nwIpxFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry describing each route being used to
|
|
forward IPX traffic to each destination Novell network and node."
|
|
::= { nwIpxFib 1 }
|
|
|
|
nwIpxFibEntry OBJECT-TYPE
|
|
SYNTAX NwIpxFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes the route to the destination Novell network and
|
|
node for which the entry exists."
|
|
INDEX { nwIpxFibNetId }
|
|
::= { nwIpxFibTable 1 }
|
|
|
|
NwIpxFibEntry ::=
|
|
SEQUENCE {
|
|
nwIpxFibNetId IpxAddress,
|
|
nwIpxFibHops INTEGER,
|
|
nwIpxFibTimeTicks TimeTicks,
|
|
nwIpxFibNextHopIf INTEGER,
|
|
nwIpxFibNextHopNet OCTET STRING,
|
|
nwIpxFibNextHopNode MacAddress,
|
|
nwIpxFibRouteType INTEGER
|
|
}
|
|
|
|
nwIpxFibNetId OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Novell Network Number of the destination for which the
|
|
entry exists. The IpxAddress consists of four octets"
|
|
::= { nwIpxFibEntry 1 }
|
|
|
|
nwIpxFibHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of hops required to reach the destination for
|
|
which the entry exists. It is considered as metric 1."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxFibEntry 2 }
|
|
|
|
nwIpxFibTimeTicks OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, indicated by the number of TimeTicks,
|
|
required for a packet to reach the destination network for which the
|
|
entry exists. It is considered as metric 2."
|
|
DEFVAL { 0 }
|
|
::= { nwIpxFibEntry 3 }
|
|
|
|
nwIpxFibNextHopIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port through which the next hop node is
|
|
available. Packets destined for the network specified by the value of
|
|
nwIpxFibNetId will be forwarded on this port."
|
|
::= { nwIpxFibEntry 4 }
|
|
|
|
nwIpxFibNextHopNet OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Novell Network Number portion of the fully formed next
|
|
hop IPX Address of the next hop node."
|
|
::= { nwIpxFibEntry 5 }
|
|
|
|
nwIpxFibNextHopNode OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the node portion of the fully formed next hop IPX Address."
|
|
::= { nwIpxFibEntry 6 }
|
|
|
|
nwIpxFibRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
direct(3),
|
|
remote(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the status of the route. A value of 3 indicates that the
|
|
destination is on the network segment that is directly connected to
|
|
the router port identified by nwIpxFibNextHopIf. A value of 4 indicates
|
|
that the destination is on an indirectly connected network segment,
|
|
which is reachable through the next hop router indicated by the value
|
|
of nwIpxFibNextHopNodeId. A value of 2 indicates that the route is
|
|
invalid."
|
|
DEFVAL { direct }
|
|
::= { nwIpxFibEntry 7 }
|
|
|
|
|
|
-- IPX Access Control List Table
|
|
-- This table contains the managed objects for the Access Control Lists
|
|
-- within the IPX Router. Access Control Lists allow configuration of
|
|
-- restricted access to networks and protocols reachable thru the IPX
|
|
-- Router device. Access Control Lists can be defined with these
|
|
nwIpxAclValidEntries OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of valid entries that exist in the access control
|
|
list table."
|
|
::= { nwIpxAccessControl 1 }
|
|
|
|
nwIpxAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the access control list information for IPX
|
|
traffic. This table contains entries, each of which allows packet
|
|
forwarding between source/destination pairs to be permitted or denied.
|
|
The list is identified by the Access Control List ID. Each list may
|
|
contain multiple entries ordered by sequence number. When a particular
|
|
access control list is searched, it is searched in sequence number
|
|
order and the first match found ends the search. If no match if found,
|
|
access defaults to permitted."
|
|
::= { nwIpxAccessControl 2 }
|
|
|
|
nwIpxAclEntry OBJECT-TYPE
|
|
SYNTAX NwIpxAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains IPX source/destination access information."
|
|
INDEX { nwIpxAclIdentifier, nwIpxAclSequence }
|
|
::= { nwIpxAclTable 1 }
|
|
|
|
NwIpxAclEntry ::=
|
|
SEQUENCE {
|
|
nwIpxAclIdentifier INTEGER,
|
|
nwIpxAclSequence INTEGER,
|
|
nwIpxAclPermission INTEGER,
|
|
nwIpxAclMatches Counter,
|
|
nwIpxAclDestNetNum OCTET STRING,
|
|
nwIpxAclDestNode OCTET STRING,
|
|
nwIpxAclDestSocket OCTET STRING,
|
|
nwIpxAclSrcNetNum OCTET STRING,
|
|
nwIpxAclSrcNode OCTET STRING,
|
|
nwIpxAclSrcSocket OCTET STRING
|
|
}
|
|
|
|
nwIpxAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the IPX access control list
|
|
table. This value identifies the access control list by a unique
|
|
identifier (at least 1) arbitrarily assigned by the user. All entries
|
|
that have the same value for nwIpxAclIdentifier belong to the same
|
|
access control list."
|
|
::= { nwIpxAclEntry 1 }
|
|
|
|
nwIpxAclSequence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the secondary (minor) index into the IPX access control list
|
|
table. This number corresponds to a sequence number used to order
|
|
multiple entries within the same access control list."
|
|
::= { nwIpxAclEntry 2 }
|
|
|
|
nwIpxAclPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permit(3),
|
|
deny(4),
|
|
permit-bidirectional(5),
|
|
deny-bidirectional(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether access is allowed or denied between the source and
|
|
destination address pair. Note that source and destination are
|
|
interchangeable when bi-directional control is selected. To remove an
|
|
existing entry set nwIpxAclPermission to invalid (2). Invalid entries
|
|
disappear after reboot."
|
|
DEFVAL { permit }
|
|
::= { nwIpxAclEntry 3 }
|
|
|
|
nwIpxAclMatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of matches on this entry that have resulted in
|
|
the permit/deny access restriction being applied as part of the
|
|
forwarding process."
|
|
::= { nwIpxAclEntry 4 }
|
|
|
|
nwIpxAclDestNetNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the destination Novell Network Number used to compare for
|
|
matches on the access control list. A 0 value is a wildcard which
|
|
matches any Novell Network Number."
|
|
::= { nwIpxAclEntry 5 }
|
|
|
|
nwIpxAclDestNode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the MAC-layer address of the destination node (represented
|
|
as an octet string), used to compare for matches on the access control
|
|
list. A value 0 is a wildcard, which matches any node."
|
|
::= { nwIpxAclEntry 6 }
|
|
|
|
nwIpxAclDestSocket OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the socket number of the destination socket used to compare
|
|
for matches on the access control list. A 0 value is a wildcard
|
|
matching any socket."
|
|
::= { nwIpxAclEntry 7 }
|
|
|
|
nwIpxAclSrcNetNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Novell Network Number of the source Novell Network used
|
|
to compare for matches on the access control list. A 0 value is a
|
|
wildcard matching any Novell Network Number."
|
|
::= { nwIpxAclEntry 8 }
|
|
|
|
nwIpxAclSrcNode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the MAC-layer address of the source node (represented as an
|
|
octet string), used to compare for matches on the Access Control
|
|
List. A 0 value is a wildcard matching any node."
|
|
::= { nwIpxAclEntry 9 }
|
|
|
|
nwIpxAclSrcSocket OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the socket number of the source socket to compare for
|
|
matches on the Access Control List. A 0 value is a wildcard matching
|
|
any socket."
|
|
::= { nwIpxAclEntry 10 }
|
|
|
|
-- IPX Redirector Group
|
|
|
|
-- IPX NetBIOS System Group
|
|
-- In order for NetBIOS to function, an IPX routing service is provided
|
|
-- which allows NetBIOS traffic to be flooded out all router ports with
|
|
-- NetBIOS enabled.
|
|
|
|
nwIpxNetBIOSAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the NetBIOS Broadcast Redirector,
|
|
system-wide. Enabled (3) causes the NetBios Broadcast Redirector to
|
|
become active on any router port configured and enabled for IPX
|
|
Routing Services. Disabled (2) causes the NetBIOS Broadcast Redirector
|
|
to perform a graceful shut-down on any active IPX router port."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxNetBIOSConfig 1 }
|
|
|
|
nwIpxNetBIOSOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the NetBIOS Broadcast
|
|
Redirector, system-wide. "
|
|
::= { nwIpxNetBIOSConfig 2 }
|
|
|
|
nwIpxNetBIOSAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the NetBIOS Broadcast Redirector, system-wide. Reset (2)
|
|
forces a restart of the NetBIOS Broadcast Redirector without a
|
|
graceful shut-down on any active router port and without effecting any
|
|
other router application."
|
|
DEFVAL { other }
|
|
::= { nwIpxNetBIOSConfig 3 }
|
|
|
|
nwIpxNetBIOSOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxNetBiosOperStatus has been in the current state."
|
|
::= { nwIpxNetBIOSConfig 4 }
|
|
|
|
nwIpxNetBIOSVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the NetBIOS Broadcast
|
|
Redirector firmware, in textual format."
|
|
::= { nwIpxNetBIOSConfig 5 }
|
|
|
|
-- IPX NetBIOS System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IPX NetBIOS packet
|
|
-- and byte counters.
|
|
nwIpxNetBIOSCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide) NetBIOS
|
|
broadcast packet and byte counters. Enabled (3) causes these counters
|
|
to become active on all router port. Disabled (2) causes these
|
|
counters to become inactive."
|
|
::= { nwIpxNetBIOSCounters 1 }
|
|
|
|
nwIpxNetBIOSCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) NetBIOS broadcast packet and byte
|
|
counters. Reset (2) resets the NetBIOS broadcast aggregate counters
|
|
to 0. nwIpxNetBIOSCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxNetBIOSCounters 2 }
|
|
|
|
nwIpxNetBIOSCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundreds of a second, that the
|
|
nwIpxNetBIOSCtrAdminStatus has been in the current state."
|
|
::= { nwIpxNetBIOSCounters 3 }
|
|
|
|
nwIpxNetBIOSCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS broadcast packets that have
|
|
been received, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 4 }
|
|
|
|
nwIpxNetBIOSCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS broadcast packets that have
|
|
been transmitted, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 5 }
|
|
|
|
nwIpxNetBIOSCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS broadcast packets that have
|
|
been administratively filtered, system-wide, during
|
|
nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 6 }
|
|
|
|
nwIpxNetBIOSCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS broadcast packets that have
|
|
been discarded, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 7 }
|
|
|
|
nwIpxNetBIOSCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been received, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 8 }
|
|
|
|
nwIpxNetBIOSCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been transmitted, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 9 }
|
|
|
|
nwIpxNetBIOSCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been administratively filtered, system-wide, during
|
|
nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 10 }
|
|
|
|
nwIpxNetBIOSCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been discarded, system-wide, during nwIpxNetBIOSCtrOperationalTime."
|
|
::= { nwIpxNetBIOSCounters 11 }
|
|
|
|
-- IPX NetBIOS Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- NetBIOS on a per router port basis.
|
|
nwIpxNetBIOSIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxNetBIOSIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each entry can
|
|
contain different values, allowing the NetBIOS Broadcast Redirector
|
|
configuration to vary from router port to router port. This table is
|
|
indexed by nwIpxNetBIOSIfIndex, which indicates the value of MIB 2
|
|
ifindex, which identifies the router port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfConfig 1 }
|
|
|
|
nwIpxNetBIOSIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxNetBIOSIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the IPX NetBIOS broadcasting configuration for
|
|
the router port for which the entry exists." INDEX { nwIpxNetBIOSIfIndex }
|
|
::= { nwIpxNetBIOSIfTable 1 }
|
|
|
|
NwIpxNetBIOSIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxNetBIOSIfIndex INTEGER,
|
|
nwIpxNetBIOSIfAdminStatus INTEGER,
|
|
nwIpxNetBIOSIfOperStatus INTEGER,
|
|
nwIpxNetBIOSIfOperationalTime TimeTicks
|
|
}
|
|
|
|
nwIpxNetBIOSIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value in MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfEntry 1 }
|
|
|
|
nwIpxNetBIOSIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX NetBIOS broadcasting on the
|
|
router port for which the entry exists. Enabled (3) causes this
|
|
router port to become active. Disabled (2) causes it to become
|
|
inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxNetBIOSIfEntry 2 }
|
|
|
|
nwIpxNetBIOSIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of IPX NetBIOS
|
|
broadcasting on the IPX router port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfEntry 3 }
|
|
|
|
nwIpxNetBIOSIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that IPX
|
|
NetBIOS broadcasting, nwIpxNetBIOSIfOperStatus, has been in its
|
|
current state on the router port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfEntry 4 }
|
|
|
|
-- IPX NetBIOS Interface Counters Table
|
|
-- This table contains the managed objects for IPX NetBIOS packet and
|
|
-- byte counter on a per router port basis
|
|
|
|
nwIpxNetBIOSIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxNetBIOSIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the IPX NetBIOS packet and byte counters for each
|
|
router port on this device."
|
|
::= { nwIpxNetBIOSIfCounters 1 }
|
|
|
|
nwIpxNetBIOSIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxNetBIOSIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the NetBIOS Interface Counter Table.
|
|
This number corresponds to the index into the MIB 2 Interface Table
|
|
which describes the router port for which this entry exists."
|
|
INDEX { nwIpxNetBIOSIfCtrIfIndex }
|
|
::= { nwIpxNetBIOSIfCtrTable 1 }
|
|
|
|
NwIpxNetBIOSIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxNetBIOSIfCtrIfIndex INTEGER,
|
|
nwIpxNetBIOSIfCtrAdminStatus INTEGER,
|
|
nwIpxNetBIOSIfCtrReset INTEGER,
|
|
nwIpxNetBIOSIfCtrOperationalTime TimeTicks,
|
|
nwIpxNetBIOSIfCtrInPkts Counter,
|
|
nwIpxNetBIOSIfCtrOutPkts Counter,
|
|
nwIpxNetBIOSIfCtrFilteredPkts Counter,
|
|
nwIpxNetBIOSIfCtrDiscardPkts Counter,
|
|
nwIpxNetBIOSIfCtrInBytes Counter,
|
|
nwIpxNetBIOSIfCtrOutBytes Counter,
|
|
nwIpxNetBIOSIfCtrFilteredBytes Counter,
|
|
nwIpxNetBIOSIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxNetBIOSIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the IPX NetBIOS Interface Counter Table.
|
|
This number correspoonds to the index into the MIB 2 Interface Table
|
|
which describes the router port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfCtrEntry 1 }
|
|
|
|
nwIpxNetBIOSIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX NetBIOS packet and bytes
|
|
counters on the IPX router port for which the entry exists. Enabled (3)
|
|
causes these counters to become active on the configured NetBIOS router
|
|
port. Disabled (2) causes thes counters to become inactive on the
|
|
configured NetBIOS router port."
|
|
::= { nwIpxNetBIOSIfCtrEntry 2 }
|
|
|
|
nwIpxNetBIOSIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the NetBIOS packet and bvyte counters on the router port for
|
|
which the entry exists. Reset (2) resets the interface-specific
|
|
counters to 0. nwIpxNetBIOSIfCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxNetBIOSIfCtrEntry 3 }
|
|
|
|
nwIpxNetBIOSIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that the
|
|
interface-specific NetBIOS packet and byte counters have been active on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxNetBIOSIfCtrEntry 4 }
|
|
|
|
nwIpxNetBIOSIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS packets that have been recieved,
|
|
on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 5 }
|
|
|
|
nwIpxNetBIOSIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS packets that have been
|
|
transmitted, on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationallTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 6 }
|
|
|
|
nwIpxNetBIOSIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS packets that have been
|
|
administratively filtered, on the router port for which the entry
|
|
exists, during nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 7 }
|
|
|
|
nwIpxNetBIOSIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of NetBIOS packets that have been discarded,
|
|
on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 8 }
|
|
|
|
nwIpxNetBIOSIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been recieved, on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 9 }
|
|
|
|
nwIpxNetBIOSIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been transmitted, on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 10 }
|
|
|
|
nwIpxNetBIOSIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been administratively filtered, that were recieved on the router port
|
|
for which the entry exists during nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 11 }
|
|
|
|
nwIpxNetBIOSIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the NetBIOS packets that have
|
|
been discarded, on the router port for which the entry exists, during
|
|
nwIpxNetBIOSIfCtrOperationalTime."
|
|
::= { nwIpxNetBIOSIfCtrEntry 12 }
|
|
|
|
|
|
-- IPX Broadcast System Group
|
|
|
|
-- IPX Broadcast support allows broadcast packets that would normally be
|
|
-- delivered to the host to also be switched out the proper router port
|
|
-- if that router port has broadcast enabled. The router port is determined
|
|
-- by the destination network number in the broadcast packet.
|
|
|
|
nwIpxBcastAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX Broadcast. Enabled (3) casuses
|
|
IPX Broadcast to become active on any configured IPX router port.
|
|
Disabled (2) causes IPX Broadcast to perform a graceful shutdown on
|
|
any active IPX router ports."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxBroadcastConfig 1 }
|
|
|
|
nwIpxBcastOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the IPX Broadcast."
|
|
::= { nwIpxBroadcastConfig 2 }
|
|
|
|
nwIpxBcastAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the IPX Broadcast. Reset (2) will force a restart of the IPX
|
|
Broadcast without a graceful shutdown on any active IPX router port,
|
|
without effecting any other router applications."
|
|
DEFVAL { other }
|
|
::= { nwIpxBroadcastConfig 3 }
|
|
|
|
nwIpxBcastOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that IPX
|
|
Broadcast has been in its current operational state."
|
|
::= { nwIpxBroadcastConfig 4 }
|
|
|
|
nwIpxBcastVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of IPX Broadcast."
|
|
::= { nwIpxBroadcastConfig 5 }
|
|
|
|
-- IPX Broadcast System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IPX Broadcast packet
|
|
-- and byte counters.
|
|
nwIpxBcastCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (device-wide) Broadcast packet and byte counters. enable (3) causes these counters
|
|
to become active on any router port running Broadcast. disabled (2)
|
|
causes these counters to become inactive on all router port
|
|
running Broadcast."
|
|
::= { nwIpxBroadcastCounters 1 }
|
|
|
|
nwIpxBcastCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (device-wide) IPX Broadcast packet and byte
|
|
counters. Reset (2) resets the IPX Broadcast aggregate counters to 0.
|
|
nwIpxBcasstCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxBroadcastCounters 2 }
|
|
|
|
nwIpxBcastCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that the
|
|
aggregate (device-wide) IPX Broadcast packet and byte counters have been
|
|
in the current administrative state."
|
|
::= { nwIpxBroadcastCounters 3 }
|
|
|
|
nwIpxBcastCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
received, device-wide, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 4 }
|
|
|
|
nwIpxBcastCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
transmitted, device-wide, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 5 }
|
|
|
|
nwIpxBcastCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
administaratively filtered, device-wide, during
|
|
nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 6 }
|
|
|
|
nwIpxBcastCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
discarded, device-wide, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 7 }
|
|
|
|
nwIpxBcastCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
recieved, device-wide, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 8 }
|
|
|
|
nwIpxBcastCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
transmitted, device-wide, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 9 }
|
|
|
|
nwIpxBcastCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Broadcast packets that
|
|
have been administratively filtered, device-wide, during
|
|
nwIpxBcastOperationalTime."
|
|
::= { nwIpxBroadcastCounters 10 }
|
|
|
|
nwIpxBcastCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the Broadcast packets that
|
|
have been discarded, during nwIpxBcastCtrOperationalTime."
|
|
::= { nwIpxBroadcastCounters 11 }
|
|
|
|
|
|
-- IPX Broadcast Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- Broadcast on a per router port basis.
|
|
nwIpxBcastIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxBcastIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured for the
|
|
IPX distance-vector based routing protocol. Each entry can contain
|
|
different values, allowing the routing protocol configuration to
|
|
vary from router port to router port. This table is indexed by
|
|
nwIpxBcastIfIndex, which indicates the value of MIB 2 ifindex, which
|
|
identifies the router port for which the entry exists."
|
|
::= { nwIpxBroadcastIfConfig 1 }
|
|
|
|
nwIpxBcastIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxBcastIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the IPX Broadcast configuration information for the
|
|
logical IPX interface for which this entry exists."
|
|
INDEX { nwIpxBcastIfIndex }
|
|
::= { nwIpxBcastIfTable 1 }
|
|
|
|
NwIpxBcastIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxBcastIfIndex INTEGER,
|
|
nwIpxBcastIfAdminStatus INTEGER,
|
|
nwIpxBcastIfOperStatus INTEGER,
|
|
nwIpxBcastIfOperationalTime TimeTicks
|
|
}
|
|
|
|
nwIpxBcastIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This index corresponds to the primary index into the MIB 2 Interface
|
|
Table, which describes the router port for which the entry exists."
|
|
::= { nwIpxBcastIfEntry 1 }
|
|
|
|
nwIpxBcastIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX Broadcast on the router
|
|
port for which the entry exists. Enabled (2) causes IPX Broadcast on
|
|
this router port to become active. Disabled (2) causes IPX Broadcast
|
|
to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxBcastIfEntry 2 }
|
|
|
|
nwIpxBcastIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the IPX Broadcast on
|
|
the router port for which the entry exists."
|
|
::= { nwIpxBcastIfEntry 3 }
|
|
|
|
nwIpxBcastIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIPXBcastIfOperStatus has been in its current state."
|
|
::= { nwIpxBcastIfEntry 4 }
|
|
|
|
-- IPX Broadcast Interface Counters Table
|
|
-- This table contains the managed objects for IPX Broadcast packet and
|
|
-- byte counter on a per router port basis.
|
|
nwIpxBcastIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxBcastIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the IPX Broadcast packet and byte counters for each
|
|
router port on this device."
|
|
::= { nwIpxBroadcastIfCounters 1 }
|
|
|
|
nwIpxBcastIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxBcastIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the Broadcast Interface Counter Table.
|
|
This number corresponds to the index into the MIB 2 Interface Table
|
|
which describes the router port for which the entry exists."
|
|
INDEX { nwIpxBcastIfCtrIfIndex }
|
|
::= { nwIpxBcastIfCtrTable 1 }
|
|
|
|
NwIpxBcastIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxBcastIfCtrIfIndex INTEGER,
|
|
nwIpxBcastIfCtrAdminStatus INTEGER,
|
|
nwIpxBcastIfCtrReset INTEGER,
|
|
nwIpxBcastIfCtrOperationalTime TimeTicks,
|
|
nwIpxBcastIfCtrInPkts Counter,
|
|
nwIpxBcastIfCtrOutPkts Counter,
|
|
nwIpxBcastIfCtrFilteredPkts Counter,
|
|
nwIpxBcastIfCtrDiscardPkts Counter,
|
|
nwIpxBcastIfCtrInBytes Counter,
|
|
nwIpxBcastIfCtrOutBytes Counter,
|
|
nwIpxBcastIfCtrFilteredBytes Counter,
|
|
nwIpxBcastIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxBcastIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the IPX Broadcast Interface Counter
|
|
Table. This number corresponds to the index into the MIB 2 Interface
|
|
Table which describes the router port for which the entry exists."
|
|
::= { nwIpxBcastIfCtrEntry 1 }
|
|
|
|
nwIpxBcastIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX Broadcast packet and byte
|
|
counters on the router port for which the entry exists. Enabled (3)
|
|
causes these counters to become acive on the configured IPX Broadcast
|
|
router port. Disabled (2) causes these counters to become inactive on
|
|
the configured IPX Broadcast router port."
|
|
::= { nwIpxBcastIfCtrEntry 2 }
|
|
|
|
nwIpxBcastIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the IPX Broadcast packet and byte counters on the router port for
|
|
which the entry exists. Reset (2) resets the interface-specific counters
|
|
to 0. nwIpxBcastIfCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxBcastIfCtrEntry 3 }
|
|
|
|
nwIpxBcastIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that the
|
|
interface-specific IPX Broadcast packet and byte counters have been in
|
|
the current administrative state on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxBcastIfCtrEntry 4 }
|
|
|
|
nwIpxBcastIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
recieved, on the router port for which the entry exists, during
|
|
nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 5 }
|
|
|
|
nwIpxBcastIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of Broadcast packets that have been
|
|
transmitted, on the router port for which the entry existsl, during
|
|
nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 6 }
|
|
|
|
nwIpxBcastIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Broadcast packets that have been
|
|
administratively filtered, on the router port for which the entry
|
|
exists, during nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 7 }
|
|
|
|
nwIpxBcastIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of Broadcast packets that have been dis-
|
|
carded, on the router port for which the entry exists, during
|
|
nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 8 }
|
|
|
|
nwIpxBcastIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Broadcast packets that
|
|
have been recieved, on the router port for which the entry exists,
|
|
during nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 9 }
|
|
|
|
nwIpxBcastIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Broadcast packets that
|
|
have been transmitted, on the router port for which the entry exists,
|
|
during nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 10 }
|
|
|
|
nwIpxBcastIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Broadcast packets that
|
|
have been administratively filtered on the router port for which the
|
|
entry exists during nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 11 }
|
|
|
|
nwIpxBcastIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Broadcast packets that
|
|
have been discarded on the router port for which the entry exists,
|
|
during nwIpxBcastIfCtrOperationalTime."
|
|
::= { nwIpxBcastIfCtrEntry 12 }
|
|
|
|
|
|
-- IPX Echo System Group
|
|
-- Echo messages provide the ability to check for host reachability and
|
|
-- network connectivity. If the router receives an ECHO message, it
|
|
-- sends and ECHO reply to the source of the ECHO message.
|
|
|
|
nwIpxEchoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX Echo. Enabled (3) causes
|
|
IPX ECHO to become active on any configured IPX router ports.
|
|
Disabled (2) causes IPX Echo to perform a graceful shutdown on any
|
|
active IPX router port."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxEchoConfig 1 }
|
|
|
|
nwIpxEchoOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operating condition of IPX Echo."
|
|
::= { nwIpxEchoConfig 2 }
|
|
|
|
nwIpxEchoAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets IPX Echo. Reset (2) will force a restart of IPX Echo without
|
|
a graceful shutdown on any active IPX router port, without effecting
|
|
any other router applications."
|
|
::= { nwIpxEchoConfig 3 }
|
|
|
|
nwIpxEchoOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that IPX
|
|
Echo has been in its current administrative state,
|
|
nwIpxEchoOperStatus."
|
|
::= { nwIpxEchoConfig 4 }
|
|
|
|
nwIpxEchoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of IPX Echo firmware."
|
|
::= { nwIpxEchoConfig 5 }
|
|
|
|
-- IPX Echo System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IPX Echo packet
|
|
-- and byte counters.
|
|
nwIpxEchoCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregae (device-wide) IPX Echo
|
|
packet and byte counters. Enabled (3) causes these counters to become
|
|
active on any router port running IPX Echo. Disabled (2) causes these
|
|
counters to become inactive on all router ports."
|
|
::= { nwIpxEchoCounters 1 }
|
|
|
|
nwIpxEchoCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (device-wide) IPX Echo packet and byte counters.
|
|
Reset (2) resets the IPX Echo aggregate counters to 0.
|
|
nwIpxEchoCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxEchoCounters 2 }
|
|
|
|
nwIpxEchoCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that the
|
|
aggreagate (device-wide) IPX Echo packet and byte counters have been in
|
|
the current administrative state."
|
|
::= { nwIpxEchoCounters 3 }
|
|
|
|
nwIpxEchoCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been recieved,
|
|
device-wide, during nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 4 }
|
|
|
|
nwIpxEchoCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
transmitted, device-wide, during nwIpxEchoCtrOperationalTIme."
|
|
::= { nwIpxEchoCounters 5 }
|
|
|
|
nwIpxEchoCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
administratively filtered, device-wide, during
|
|
nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 6 }
|
|
|
|
nwIpxEchoCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been discarded,
|
|
device-wide, during nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 7 }
|
|
|
|
nwIpxEchoCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been recieved,
|
|
device-wide, during nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 8 }
|
|
|
|
nwIpxEchoCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
transmitted, device-wide, during nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 9 }
|
|
|
|
nwIpxEchoCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
administratively filtered, device-wide, during
|
|
nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 10 }
|
|
|
|
nwIpxEchoSCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the Echo packets that
|
|
have been discarded, during nwIpxEchoCtrOperationalTime."
|
|
::= { nwIpxEchoCounters 11 }
|
|
|
|
|
|
-- IPX Echo Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- Echo on a per router port basis.
|
|
nwIpxEchoIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxEchoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured for IPX
|
|
Echo. Each entry can contain different values, allowing the routing
|
|
protocol configuration to vary from router port to router port. This
|
|
table is indexed by nwIpxEchoIfIndex, which indicates the value of
|
|
MIB 2 ifindex, which identifies the router port for which the entry
|
|
exists."
|
|
::= { nwIpxEchoIfConfig 1 }
|
|
|
|
nwIpxEchoIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpxEchoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the IPX Echo information for the logical IPX interface for
|
|
which the entry exists."
|
|
INDEX { nwIpxEchoIfIndex }
|
|
::= { nwIpxEchoIfTable 1 }
|
|
|
|
NwIpxEchoIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpxEchoIfIndex INTEGER,
|
|
nwIpxEchoIfAdminStatus INTEGER,
|
|
nwIpxEchoIfOperStatus INTEGER,
|
|
nwIpxEchoIfOperationalTime TimeTicks
|
|
}
|
|
|
|
nwIpxEchoIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This index corresponds to the primary index into the MIB 2 ifTable,
|
|
which describes the router port for which the entry exists."
|
|
::= { nwIpxEchoIfEntry 1 }
|
|
|
|
nwIpxEchoIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX Echo on the router port for
|
|
which the entry exists. Enabled (2) causes this router port to
|
|
become active. Disabled (3) causes this router port to become
|
|
inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxEchoIfEntry 2 }
|
|
|
|
nwIpxEchoIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of IPX Echo on the router
|
|
port for which the entry exists."
|
|
::= { nwIpxEchoIfEntry 3 }
|
|
|
|
nwIpxEchoIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpxEchoIfAdminStatus has been in its current state."
|
|
::= { nwIpxEchoIfEntry 4 }
|
|
|
|
-- IPX Echo Interface Counters Table
|
|
-- This table contains the managed objects for IPX Echo packet and
|
|
-- byte counter on a per router port basis.
|
|
nwIpxEchoIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxEchoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the IPX Echo packet and byte counters for each
|
|
router port on this device."
|
|
::= { nwIpxEchoIfCounters 1 }
|
|
|
|
nwIpxEchoIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpxEchoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the Echo Interface Counter Table. This
|
|
number corresponds to the index into the MIB 2 Interface Table which
|
|
describes the router port for which the entry exists."
|
|
INDEX { nwIpxEchoIfCtrIfIndex }
|
|
::= { nwIpxEchoIfCtrTable 1 }
|
|
|
|
NwIpxEchoIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpxEchoIfCtrIfIndex INTEGER,
|
|
nwIpxEchoIfCtrAdminStatus INTEGER,
|
|
nwIpxEchoIfCtrReset INTEGER,
|
|
nwIpxEchoIfCtrOperationalTime TimeTicks,
|
|
nwIpxEchoIfCtrInPkts Counter,
|
|
nwIpxEchoIfCtrOutPkts Counter,
|
|
nwIpxEchoIfCtrFilteredPkts Counter,
|
|
nwIpxEchoIfCtrDiscardPkts Counter,
|
|
nwIpxEchoIfCtrInBytes Counter,
|
|
nwIpxEchoIfCtrOutBytes Counter,
|
|
nwIpxEchoIfCtrFilteredBytes Counter,
|
|
nwIpxEchoIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpxEchoIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the IPX Echo Interface Counter Table.
|
|
This number corresponds to the index into the MIB 2 Interfcace Table
|
|
which describes the router port for which the entry exists."
|
|
::= { nwIpxEchoIfCtrEntry 1 }
|
|
|
|
nwIpxEchoIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the IPX Echo packet and byte counters
|
|
on the IPX router port for which the entry exists. Enabled (3) causes
|
|
these counters to become active on the router port configured for IPX
|
|
Echo. Disabled (2) causes these counters to become inactive on the
|
|
configured IPX Echo router port."
|
|
::= { nwIpxEchoIfCtrEntry 2 }
|
|
|
|
nwIpxEchoIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the IPX Echo packet andbyte counters on the router port for which
|
|
the entryexists. Reset (2) resets the interface-specific counters to 0.
|
|
nwIpxEchoIfCtrOperationalTime is also reset to 0."
|
|
::= { nwIpxEchoIfCtrEntry 3 }
|
|
|
|
nwIpxEchoIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second, that the
|
|
interface-specific IPX Echo packet and byte counters have been in the
|
|
current administrative state on the router port for which the entry
|
|
exists."
|
|
::= { nwIpxEchoIfCtrEntry 4 }
|
|
|
|
nwIpxEchoIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been recieved,
|
|
on the router port for which the entry exists, during
|
|
nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 5 }
|
|
|
|
nwIpxEchoIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
transmitted, on the router port for which the entry exists, during
|
|
nwIpxEchoIfCrOperationalTIme."
|
|
::= { nwIpxEchoIfCtrEntry 6 }
|
|
|
|
nwIpxEchoIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been
|
|
administratively filtered, on the router port for which the entry
|
|
exists, during nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 7 }
|
|
|
|
nwIpxEchoIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IPX Echo packets that have been discaded,
|
|
on the router port for which the entry exists, during
|
|
nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 8 }
|
|
|
|
nwIpxEchoIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Echo packets that have
|
|
been recieved, on the router port for which the entry exists, during
|
|
nwIpxEchoIfCtrOpeationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 9 }
|
|
|
|
nwIpxEchoIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Echo packets that have
|
|
been transmitted, on the router port for which the entry exists, during
|
|
nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 10 }
|
|
|
|
nwIpxEchoIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Echo packets that have
|
|
been administratively filtered and recieved on the router port for which
|
|
the entry exists, during nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 11 }
|
|
|
|
nwIpxEchoIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IPX Echo packets that have
|
|
been discarded, that were recieved on the router port for which the
|
|
entry exists, during nwIpxEchoIfCtrOperationalTime."
|
|
::= { nwIpxEchoIfCtrEntry 12 }
|
|
|
|
--
|
|
-- IPX Hosts-to-Media Table
|
|
|
|
-- This table provides a mapping between IPX Network Protocol
|
|
-- addresses and their corresponding circuit identifiers (if
|
|
-- applicable), port numbers, and framing.
|
|
|
|
|
|
nwIpxHostMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Ipx Address translation table used for mapping
|
|
an IPX address to a circuit identifier (if applicable),
|
|
corresponding port number, and framing type."
|
|
::= { nwIpxHostsToMedia 1 }
|
|
|
|
nwIpxHostMapEntry OBJECT-TYPE
|
|
SYNTAX NwIpxHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one IpxAddress to circuit
|
|
equivalence. Also provided is the framing required to
|
|
converse with this host, and the corresponding logical
|
|
port number."
|
|
INDEX { nwIpxHostMapIfIndex, nwIpxHostMapIpxAddr }
|
|
::= { nwIpxHostMapTable 1 }
|
|
|
|
NwIpxHostMapEntry ::=
|
|
SEQUENCE {
|
|
nwIpxHostMapIfIndex INTEGER,
|
|
nwIpxHostMapIpxAddr IpxAddress,
|
|
nwIpxHostMapPhysAddr PhysAddress,
|
|
nwIpxHostMapType INTEGER,
|
|
nwIpxHostMapCircuitID INTEGER,
|
|
nwIpxHostMapFraming INTEGER,
|
|
nwIpxHostMapPortNumber INTEGER
|
|
}
|
|
|
|
nwIpxHostMapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the Ipx HostMap
|
|
table. This number corresponds to the index into the MIB-2
|
|
Interfaces Group which describes the IPX router port for which
|
|
the entry exists."
|
|
::= { nwIpxHostMapEntry 1 }
|
|
|
|
nwIpxHostMapIpxAddr OBJECT-TYPE
|
|
SYNTAX IpxAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IpxAddress of the host on the corresponding interface
|
|
and circuit (if applicable). The IpxAddress consists of a network
|
|
number of 4 octets followed by 6 octets of node identifier."
|
|
::= { nwIpxHostMapEntry 2 }
|
|
|
|
nwIpxHostMapPhysAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The media-dependent 'physical' address. The value of
|
|
this object is 0 for entries indicating native-wan(8)
|
|
framing."
|
|
::= { nwIpxHostMapEntry 3 }
|
|
|
|
nwIpxHostMapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
dynamic(3),
|
|
static(4),
|
|
inactive(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry in the
|
|
nwIpxHostMapTable. That is, it effectively dissasociates the
|
|
circuit and/or interface identified with said entry from the
|
|
mapping identified with said entry. It is an implementation-
|
|
specific matter as to whether the agent removes an invalidated
|
|
entry from the table. Accordingly, management stations must be
|
|
prepared to receive tabular information from agents that
|
|
corresponds to entries not currently in use. Proper inter-
|
|
pretation of such entries requires examination of the relevant
|
|
wIpxHostMapType object."
|
|
|
|
::= { nwIpxHostMapEntry 4 }
|
|
|
|
nwIpxHostMapCircuitID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The identifier for the virtual circuit present on the
|
|
interface. On an interface configured for Frame Relay,
|
|
this number is the DLCI for the IPX Address at the end of
|
|
the circuit. For non-WAN interfaces, the value of this
|
|
object is zero."
|
|
::= { nwIpxHostMapEntry 5 }
|
|
|
|
nwIpxHostMapFraming OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- enet,fddi,and token ring
|
|
i8022(4), -- enet, token ring, and fddi
|
|
novell(6), -- ethernet and fddi
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenet8022(10), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encapenetnovell(12), -- wan media types
|
|
encaptr8022(13), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddi8022(15), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type required to converse with the
|
|
host for which this entry exists."
|
|
::= { nwIpxHostMapEntry 6 }
|
|
|
|
nwIpxHostMapPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value for the logical port number. It's value
|
|
ranges between 1 and a maximum value which is dependent on both
|
|
the number of configured interfaces in the system and the number
|
|
of circuits present on those interfaces which are of WAN type."
|
|
::= { nwIpxHostMapEntry 7 }
|
|
|
|
|
|
|
|
|
|
-- IPX Event Group
|
|
nwIpxEventAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IPX event logging. Enabled (3)
|
|
causes the event log to become active. Disabled (2) causes the event log
|
|
to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpxEventLogConfig 1 }
|
|
|
|
nwIpxEventMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the maximum size of the event log table. When the table size
|
|
exceeds the maximum, the first entry is deleted until the size of
|
|
the table does not exceed the maximum."
|
|
DEFVAL { 100 }
|
|
::= { nwIpxEventLogConfig 2 }
|
|
|
|
nwIpxEventTraceAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the event log. Enabled (3) allows
|
|
logging of all event types on all router ports from all protocols
|
|
and components. Disabled (2) causes the filter table to specify
|
|
which events to log."
|
|
DEFVAL { enabled }
|
|
::= { nwIpxEventLogConfig 3 }
|
|
|
|
|
|
-- Event Log Filter Table
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
|
-- and configure log entries.
|
|
|
|
nwIpxEventFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event filter configured for
|
|
IPX Routing Services events."
|
|
::= { nwIpxEventLogFilterTable 1 }
|
|
|
|
nwIpxEventFilterEntry OBJECT-TYPE
|
|
SYNTAX NwIpxEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes an event filter which defines a particular type
|
|
of event to be logged to the event log. The nwIpxEventProtocol
|
|
refers to the instance used in the nwRtgProtocolTable and
|
|
nwComponentTable specified by the Cabletron Routing Services MIB,
|
|
and identifies the protocol to which the entry applies."
|
|
INDEX { nwIpxEventFltrProtocol, nwIpxEventFltrIfNum }
|
|
::= { nwIpxEventFilterTable 1 }
|
|
|
|
NwIpxEventFilterEntry ::=
|
|
SEQUENCE {
|
|
nwIpxEventFltrProtocol INTEGER,
|
|
nwIpxEventFltrIfNum INTEGER,
|
|
nwIpxEventFltrControl INTEGER,
|
|
nwIpxEventFltrType INTEGER,
|
|
nwIpxEventFltrSeverity INTEGER,
|
|
nwIpxEventFltrAction INTEGER
|
|
}
|
|
|
|
nwIpxEventFltrProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the routing protocol involved in the event for which the
|
|
event filter exists."
|
|
::= { nwIpxEventFilterEntry 1 }
|
|
|
|
nwIpxEventFltrIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the router port involved in the event for which the event
|
|
filter exists."
|
|
::= { nwIpxEventFilterEntry 2 }
|
|
|
|
nwIpxEventFltrControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2),
|
|
add(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this value to 3 to add the event filter to the Event Filter
|
|
Table. Set this value to 2 to delete the event filter from the Event
|
|
Filter Table."
|
|
DEFVAL { add }
|
|
::= { nwIpxEventFilterEntry 3 }
|
|
|
|
nwIpxEventFltrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This 6 bit mask specifies the types of events to be logged. By
|
|
default all 6 bits are set to 1, indicating that all types of events
|
|
will be logged. Setting any bit to 0 removes an event type from this
|
|
field and prevents that type of event from being logged. Adding
|
|
event types to this field will enable those types of events to be
|
|
logged."
|
|
DEFVAL { misc }
|
|
::= { nwIpxEventFilterEntry 4 }
|
|
|
|
nwIpxEventFltrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object controls the amount of logging by ignoring events of
|
|
lower priority than specified by this filter value. The highest
|
|
value will ignore all events except those of the highest severity.
|
|
`Highmed' will log all events highest priority through lowest.
|
|
`Highlow' will log all events highest priority through lowest. The
|
|
`highmed' severity is the default setting."
|
|
DEFVAL { highest }
|
|
::= { nwIpxEventFilterEntry 5 }
|
|
|
|
nwIpxEventFltrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
log(1),
|
|
trap(2),
|
|
log-trap(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field specifies how the events are to be logged. Logging to the
|
|
`log' stores the events in the event log table. Logging to `trap' sends
|
|
events out through the trap mechanism."
|
|
DEFVAL { log }
|
|
::= { nwIpxEventFilterEntry 6 }
|
|
|
|
-- Event Log Table
|
|
-- The Event Log Table contains the logged events.
|
|
|
|
nwIpxEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpxEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event that has been logged."
|
|
::= { nwIpxEventLogTable 1 }
|
|
|
|
nwIpxEventEntry OBJECT-TYPE
|
|
SYNTAX NwIpxEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the information about an event that has been
|
|
logged to the event table."
|
|
INDEX { nwIpxEventNumber }
|
|
::= { nwIpxEventTable 1 }
|
|
|
|
NwIpxEventEntry ::=
|
|
SEQUENCE {
|
|
nwIpxEventNumber INTEGER,
|
|
nwIpxEventTime TimeTicks,
|
|
nwIpxEventType INTEGER,
|
|
nwIpxEventSeverity INTEGER,
|
|
nwIpxEventProtocol INTEGER,
|
|
nwIpxEventIfNum INTEGER,
|
|
nwIpxEventTextString OCTET STRING
|
|
}
|
|
|
|
nwIpxEventNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ordinal value assigned to the event for which the entry exists.
|
|
nwIpxEventNumber is assigned so that each event in the event log can
|
|
be uniquely identified by the value of nwIpxEventNumber."
|
|
::= { nwIpxEventEntry 1 }
|
|
|
|
nwIpxEventTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the time at which the event was logged to the event log."
|
|
::= { nwIpxEventEntry 2 }
|
|
|
|
nwIpxEventType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of event that was logged."
|
|
::= { nwIpxEventEntry 3 }
|
|
|
|
nwIpxEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the priority that was assigned to this type event."
|
|
::= { nwIpxEventEntry 4 }
|
|
|
|
nwIpxEventProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the routing protocol that was involved in this event."
|
|
::= { nwIpxEventEntry 5 }
|
|
|
|
nwIpxEventIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port that was involved in the event."
|
|
::= { nwIpxEventEntry 6 }
|
|
|
|
nwIpxEventTextString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the actual text string that was logged."
|
|
::= { nwIpxEventEntry 7 }
|
|
|
|
END
|