715 lines
29 KiB
Plaintext
715 lines
29 KiB
Plaintext
CTRON-PRIORITY-CLASSIFY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- -------------------------------------------------------------
|
|
-- ct-priority-classify-mib.txt
|
|
-- Revision: 01.00.02
|
|
-- Part Number:
|
|
-- Date: "200203121855Z" Tue Mar 12 18:55 GMT 2002
|
|
--
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@cabletron.com
|
|
--
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise-specific Priority classification MIB.
|
|
--
|
|
-- This module will be extended, as required.
|
|
--
|
|
-- -------------------------------------------------------------
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
--
|
|
-- Copyright 1999-2002 Cabletron Systems
|
|
-- -------------------------------------------------------------
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
-- PortList
|
|
-- FROM Q-BRIDGE-MIB
|
|
ctPriorityExt
|
|
FROM CTRON-MIB-NAMES;
|
|
|
|
ctPriClassify MODULE-IDENTITY
|
|
LAST-UPDATED "200203121855Z" -- Tue Mar 12 18:55 GMT 2002
|
|
ORGANIZATION "Cabletron Systems, Inc"
|
|
CONTACT-INFO
|
|
" Cabletron Systems, Inc.
|
|
Postal: 35 Industrial Way, P.O. Box 5005
|
|
Rochester, NH 03867-0505
|
|
Phone: (603) 332-9400
|
|
Email: support@cabletron.com
|
|
Web: http://www.cabletron.com"
|
|
DESCRIPTION
|
|
"The Cabletron Priority Classify MIB module for controlling
|
|
Cabletron specific priority classification criteria based
|
|
on packet content."
|
|
::= { ctPriorityExt 6 }
|
|
|
|
ctPriClassifyObjects OBJECT IDENTIFIER ::= { ctPriClassify 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
CtPriClassifyType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each enumerated value represents a unique classification
|
|
type. Different types have different rules regarding
|
|
how data is interpreted during classification. These
|
|
rules are spelled out in the comments preceding each type."
|
|
SYNTAX INTEGER {
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: The EtherType field which is present
|
|
-- in Ethernet II type packets.
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(1526..65535)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
etherType(1),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: The DSAP/SSAP pair present in 802.3
|
|
-- framed packets
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(0..65535) further limitations
|
|
-- may exist on an implementation by
|
|
-- implementation basis (DSAP must equal
|
|
-- SSAP for example)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
llcDsapSsap(2),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: The Type of Service field present in IP
|
|
-- packets (3 bits of precedence, plus
|
|
-- bits for delay, throughput, and reli-
|
|
-- ability)
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(0..255)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipTypeOfService(3),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: The IP Protocol field (ref. RFC 1700)
|
|
-- examples include (TCP,UDP,ICMP,etc)
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(0..255)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipProtocolType(4),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Transmission control used by IPX
|
|
-- routers, set to zero before network
|
|
-- transmision.
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(0..255)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipxClassOfService(5),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: IPX packet type, administered by Novell
|
|
-- 0 ...... Hello or SAP
|
|
-- 1 ...... RIP
|
|
-- 2 ...... Echo Packet
|
|
-- 3 ...... Error Packet
|
|
-- 4 ...... Netware 386 or SAP
|
|
-- 5 ...... Sequenced Packet Protocol
|
|
-- 17 ..... Netware 286
|
|
-- 16-31 .. Experimental protocols
|
|
-- LIMITATIONS:
|
|
-- DataVal: INTEGER(0..31)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipxPacketType(6),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: This group represents IP addresses
|
|
-- which are present in packets using
|
|
-- the IP protocol.
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same IP unique, only one entry
|
|
-- from this group may exist for a given
|
|
-- IP address. Additional entries fail.
|
|
--
|
|
-- DataVal: Each octet of an IP address uses one
|
|
-- octet of this Unsigned32 value starting
|
|
-- with the most significant octet (e.g.,
|
|
-- an IP address of 170.187.204.221 is
|
|
-- represented by a value of 0xaabbccdd.
|
|
--
|
|
-- DataMask: Follows the same form as DataVal
|
|
-- (e.g., 255.255.240.0 is 0x00000fff)
|
|
-- Remember that DataMask is one's
|
|
-- complement. Also, starting with the
|
|
-- most significant bit, only one "0 to 1"
|
|
-- transition may occur. (e.g., 0x000fefff
|
|
-- is not valid.
|
|
-- -----------------------------------------------------
|
|
ipAddressSource(7), -- Source IP address only.
|
|
ipAddressDestination(8), -- Destination IP address only.
|
|
ipAddressBilateral(9), -- Both Source and Dest IP.
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: The network number assigned to this
|
|
-- IPX network (zero is the local network)
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same Network Number unique
|
|
-- only one entry from this group may
|
|
-- exist for a given Network Number
|
|
-- Additional entries fail.
|
|
--
|
|
-- DataVal: INTEGER
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipxNetworkSource(10),
|
|
ipxNetworkDestination(11),
|
|
ipxNetworkBilateral(12),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Describes a UDP/IP port(socket). These
|
|
-- values are used by higher protocols
|
|
-- to target specific applications among
|
|
-- hosts. (ref. RFC 762)
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same port unique, only one
|
|
-- entry from this group may exist for a
|
|
-- given port. Additional entries fail.
|
|
--
|
|
-- DataVal: INTEGER(0..65535)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipUdpPortSource(13),
|
|
ipUdpPortDestination(14),
|
|
ipUdpPortBilateral(15),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Describes a TCP/IP port(socket). These
|
|
-- values are used by higher protocols
|
|
-- to target specific applications among
|
|
-- hosts. (ref. RFC 762)
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same port unique, only one
|
|
-- entry from this group may exist for a
|
|
-- given port. Additional entries fail.
|
|
--
|
|
-- DataVal: INTEGER(0..65535)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipTcpPortSource(16),
|
|
ipTcpPortDestination(17),
|
|
ipTcpPortBilateral(18),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Describes a IPX socket. These
|
|
-- values are used by higher protocols
|
|
-- to target specific applications among
|
|
-- hosts
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same port unique, only one
|
|
-- entry from this group may exist for a
|
|
-- given port. Additional entries fail.
|
|
--
|
|
-- DataVal: INTEGER(0..65535)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipxSocketSource(19),
|
|
ipxSocketDestination(20),
|
|
ipxSocketBilateral(21),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Describes a MAC address. These
|
|
-- values uniquely describe nodes on a
|
|
-- OSI Layer 2 network.
|
|
--
|
|
-- LIMITATIONS: While the distinction of Source/
|
|
-- Destination/Bilateral makes entries
|
|
-- with the same MAC address unique, only
|
|
-- one entry from this group may exist for
|
|
-- a given port. Additional entries fail.
|
|
--
|
|
-- DataVal: INTEGER holding the first 4 bytes of
|
|
-- the 6 byte MAC address.
|
|
-- DataMask: INTEGER holding the last 2 bytes of
|
|
-- the 6 byte MAC address in the 2 most
|
|
-- significant bytes of the INTEGER, the
|
|
-- two least significant bytes must be
|
|
-- zero.
|
|
-- Example: MAC address is 00-12-34-56-78-9A,
|
|
-- DataVal is 00123456
|
|
-- DataMask is 789A0000
|
|
-- -----------------------------------------------------
|
|
macAddressSource(22),
|
|
macAddressDestination(23),
|
|
macAddressBilateral(24),
|
|
|
|
-- -----------------------------------------------------
|
|
-- DESCRIPTION: Describes IP Fragments. IP frames
|
|
-- which exceed the MTU of the media on
|
|
-- which they travel may be fragmented
|
|
-- into smaller packets. These packets
|
|
-- no longer contain the UDP/TCP port
|
|
-- numbers, although they do still
|
|
-- contain the IP addresses from the
|
|
-- original frame.
|
|
--
|
|
-- LIMITATIONS:
|
|
-- DataVal: Val not used (0)
|
|
-- DataMask: Mask not used (0)
|
|
-- -----------------------------------------------------
|
|
ipFragments(25)
|
|
|
|
}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The PortList TEXTUAL-CONVENTION is from the Q-BRIDGE-MIB
|
|
-- as defined in draft-ietf-bridge-bridgemib-05.txt.
|
|
-- When Q-BRIDGE-MIB is officially adopted, this definition
|
|
-- should be removed and added to IMPORTS above. That of course
|
|
-- assumes that these definitions do not change in a manner such
|
|
-- that they are incompatible with the existing definitions.
|
|
-- -------------------------------------------------------------
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Priority Classification Group
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the Priority Classification feature to be globally
|
|
enabled/disabled. A value of disable(2), functionally
|
|
supersedes the RowStatus of individual entries in the
|
|
ctPriClassifyTable, but does not change their actual
|
|
RowStatus value."
|
|
DEFVAL { disable }
|
|
::= { ctPriClassifyObjects 1}
|
|
|
|
ctPriClassifyMaxEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries allowed in the
|
|
ctPriClassifyTable."
|
|
::= { ctPriClassifyObjects 2}
|
|
|
|
ctPriClassifyNumEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the ctPriClassifyTable."
|
|
::= { ctPriClassifyObjects 3}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Priority Classification Table
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtPriClassifyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing configuration information for each
|
|
Priority classification configured into the device by (local
|
|
or network) management. All entries are permanent and
|
|
will be restored after the device is reset."
|
|
::= { ctPriClassifyObjects 4 }
|
|
|
|
ctPriClassifyEntry OBJECT-TYPE
|
|
SYNTAX CtPriClassifyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes a particular entry of ctPriClassifyTable."
|
|
INDEX { ctPriClassifyPriority, ctPriClassifyDataMeaning,
|
|
ctPriClassifyDataVal, ctPriClassifyDataMask }
|
|
::= { ctPriClassifyTable 1 }
|
|
|
|
CtPriClassifyEntry ::=
|
|
SEQUENCE {
|
|
ctPriClassifyPriority
|
|
INTEGER,
|
|
ctPriClassifyDataMeaning
|
|
CtPriClassifyType,
|
|
ctPriClassifyDataVal
|
|
Unsigned32,
|
|
ctPriClassifyDataMask
|
|
Unsigned32,
|
|
ctPriClassifyIngressList
|
|
PortList,
|
|
ctPriClassifyRowStatus
|
|
RowStatus,
|
|
ctPriClassifyRowInfo
|
|
DisplayString,
|
|
ctPriClassifyTOSStatus
|
|
INTEGER,
|
|
ctPriClassifyTOSValue
|
|
INTEGER
|
|
}
|
|
|
|
ctPriClassifyPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for this entry. Any packet meeting the
|
|
classification criteria specified by this conceptual row
|
|
will be given the priority indicated by this object."
|
|
::= { ctPriClassifyEntry 1 }
|
|
|
|
ctPriClassifyDataMeaning OBJECT-TYPE
|
|
SYNTAX CtPriClassifyType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The meaning of the ctPriClassifyDataVal leaf for this
|
|
conceptual row. The ctPriClassifyDataVal specifies a
|
|
particular value which, when compared to packet data,
|
|
is used to classify that packet to a particular priority.
|
|
The part of the packet (if any), to which this data
|
|
comparison applies, is determined by this object.
|
|
|
|
For example, the value ipAddressBilateral(8) means that
|
|
the value ctPriClassifyDataVal for this entry is an IP
|
|
address. It further means that the given IP address
|
|
will be compared against both source and destination
|
|
IP address fields in a packet. Such an entry obviously
|
|
would not not match against any non-IP packets.
|
|
|
|
Additionally, the value of this leaf will impose certain
|
|
implicit ranges and interpretations of data contained
|
|
within the ctPriClassifyDataVal leaf for this entry. The
|
|
specific limitations of each type should be spelled out
|
|
in the comments for that type."
|
|
::= { ctPriClassifyEntry 2 }
|
|
|
|
ctPriClassifyDataVal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data value associated with ctPriClassifyDataMeaning.
|
|
The explicit range of this value is any unsigned 32-bit
|
|
integer(0..4294967295). This range may vary, however,
|
|
depending upon the value of ctPriClassifyDataMeaning.
|
|
Illegal values should not be allowed."
|
|
::= { ctPriClassifyEntry 3 }
|
|
|
|
ctPriClassifyDataMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the one's complement of a 32-bit mask.
|
|
This mask is applicable to the data comparison of
|
|
ctPriClassifyDataVal. The mask is applied to the actual
|
|
packet data under consideration through a logical bitwise
|
|
AND operation. This result is then compared to the data.
|
|
|
|
For example, we want to classify according to a bilateral
|
|
IP address of 134.141.0.0 with a mask of 255.255.240.0.
|
|
This would be reflected by the following values:
|
|
|
|
ctPriClassifyDataMeaning: ipAddressBilateral(8)
|
|
ctPriClassifyDataVal: 0x868d0000
|
|
ctPriClassifyDataMask: 0x00000fff
|
|
|
|
Again there are contextual implications for this leaf
|
|
depending upon the value of ctPriClassifyDataMeaning.
|
|
Not all types will use the mask, and others will impose
|
|
restrictions. This value should however be a true
|
|
indication of the masking operation. In other words,
|
|
data types that don't use a mask should only allow a
|
|
value of zero, indicating that all data bits are
|
|
significant in the comparison.
|
|
|
|
The specific restrictions of each type should be spelled
|
|
out in the comments for that type. Illegal values should
|
|
not be allowed."
|
|
::= { ctPriClassifyEntry 4 }
|
|
|
|
ctPriClassifyIngressList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports on which this classification rule applies.
|
|
Classification occurs on ingress. An agent implementation
|
|
should allow a set operation of this object to create a
|
|
row if it does not exist."
|
|
DEFVAL { '0000'H }
|
|
::= { ctPriClassifyEntry 5 }
|
|
|
|
ctPriClassifyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides both control and status for the
|
|
associated conceptual row in the table. Rows can be
|
|
created in two ways.
|
|
|
|
createAndGo - The specified row will be created and
|
|
activated if the instance is allowable. If not, an
|
|
inconsistentValue exception will be returned and the
|
|
row will not be created. This provides the most
|
|
optimal method of creating an active row, but provides
|
|
the user no explanation if the row cannot be created.
|
|
|
|
createAndWait - The specified row will be created and put
|
|
in the notInService state if the instance is allowable.
|
|
A subsequent activation of this row will bring it into
|
|
the active state. If the instance is not allowable,
|
|
the row will be created and put in the notReady state.
|
|
A subsequent activation of this row will fail. Since
|
|
the inappropriate information is always contained in the
|
|
indexing leaves, activation will never succeed and the
|
|
row should be removed by the management station. When
|
|
a row is in the notReady state, the ctPriClassifyRowInfo
|
|
may be retrieved to obtain a plain English explanation
|
|
of why this row cannot be activated. createAndWait is
|
|
the preferred method for this reason.
|
|
|
|
Both methods described above leave ctPriClassifyIngressList
|
|
in it's default state, requiring an additional set operation
|
|
in order to modify it. An even more optimal twist on the
|
|
createAndWait method is to set the ctPriClassifyIngressList
|
|
to it's desired value as a method for row creation. This
|
|
will essentially cause an implicit createAndWait since it
|
|
too will leave the row in either the notInService or
|
|
notReady state. This leaves only activation or error
|
|
analysis as the last step.
|
|
|
|
Any rows left in the notReady or notInService state for
|
|
more than 5 minutes should be automatically removed by
|
|
the agent implementation."
|
|
::= { ctPriClassifyEntry 6 }
|
|
|
|
ctPriClassifyRowInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides info about this row in the form of
|
|
an ASCII string, suitable for display purposes. The
|
|
intended purpose of this object is to provide an
|
|
'agent-specific' explanation as to why the
|
|
ctPriClassifyRowStatus for this conceptual row is in
|
|
the 'notReady' state. A management station should read
|
|
this object and display it to the user in this case.
|
|
|
|
A conceptual row that does not fall into this category may
|
|
simply return a single NULL, but may also provide any useful
|
|
info of its choice. A management station may attempt to
|
|
display such info if it so chooses, but is under no burden
|
|
to do so."
|
|
::= { ctPriClassifyEntry 7 }
|
|
|
|
ctPriClassifyTOSStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether an IP Type Of Service (TOS)
|
|
value, defined by ctPriClassifyTOSValue, should be written
|
|
into the TOS field of the IP header for any packet matching
|
|
the classification specified by this conceptual row. This
|
|
object may be set to enable only for the conceptual rows
|
|
whose ctPriClassifyDataMeaning and ctPriClassifyDataVal have
|
|
the following values:
|
|
|
|
ctPriClassifyDataMeaning ctPriClassifyDataVal
|
|
------------------------ --------------------
|
|
etherType(1) 0x0800 (IP)
|
|
llcDsapSsap(2) 0x0606 (IP)
|
|
ipTypeOfService(3) any
|
|
ipProtocolType(4) any
|
|
ipAddressSource(7) any
|
|
ipAddressDestination(8) any
|
|
ipAddressBilateral(9) any
|
|
ipUdpPortSource(13) any
|
|
ipUdpPortDestination(14) any
|
|
ipUdpPortBilateral(15) any
|
|
ipTdpPortSource(16) any
|
|
ipTdpPortDestination(17) any
|
|
ipTdpPortBilateral(18) any
|
|
ipFrag(25) not applicable
|
|
|
|
A conceptual row that does not fall into these categories may
|
|
be set to disable(2) and will return disable(2)."
|
|
::= { ctPriClassifyEntry 8 }
|
|
|
|
ctPriClassifyTOSValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be written into the IP TOS field of the IP header
|
|
of any packet that matches the classification specified by the
|
|
conceptual row."
|
|
::= { ctPriClassifyEntry 9 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Supported Ability Table
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyAbilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtPriClassifyAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information for each of the priority
|
|
classification types. Types for which there is no
|
|
corresponding row are not supported by this device."
|
|
::= { ctPriClassifyObjects 5 }
|
|
|
|
ctPriClassifyAbilityEntry OBJECT-TYPE
|
|
SYNTAX CtPriClassifyAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes a particular entry of ctPriClassifyAbilityTable."
|
|
INDEX { ctPriClassifyAbility }
|
|
::= { ctPriClassifyAbilityTable 1 }
|
|
|
|
CtPriClassifyAbilityEntry ::=
|
|
SEQUENCE {
|
|
ctPriClassifyAbility
|
|
CtPriClassifyType,
|
|
ctPriClassifyPorts
|
|
PortList
|
|
}
|
|
|
|
ctPriClassifyAbility OBJECT-TYPE
|
|
SYNTAX CtPriClassifyType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority classification type associated with this entry."
|
|
::= { ctPriClassifyAbilityEntry 1 }
|
|
|
|
ctPriClassifyPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports on which the classification type
|
|
specified by ctPriClassifyAbility is supported."
|
|
::= { ctPriClassifyAbilityEntry 2 }
|
|
|
|
ctPriClassifyTableLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the sysUpTime at which the last
|
|
change was made to the ctPriClassifyTable."
|
|
::= { ctPriClassifyObjects 6}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyConformance OBJECT IDENTIFIER ::= { ctPriClassify 2 }
|
|
|
|
ctPriClassifyGroups OBJECT IDENTIFIER ::= { ctPriClassifyConformance 1 }
|
|
ctPriClassifyCompliances OBJECT IDENTIFIER ::= { ctPriClassifyConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctPriClassifyStatus,
|
|
ctPriClassifyMaxEntries,
|
|
ctPriClassifyNumEntries,
|
|
ctPriClassifyIngressList,
|
|
ctPriClassifyRowStatus,
|
|
ctPriClassifyRowInfo,
|
|
ctPriClassifyTOSStatus,
|
|
ctPriClassifyTOSValue,
|
|
ctPriClassifyPorts,
|
|
ctPriClassifyTableLastChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing device level control
|
|
and status information for Priority classification."
|
|
::= { ctPriClassifyGroups 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
ctPriClassifyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support
|
|
Priority classification."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { ctPriClassifyBaseGroup }
|
|
|
|
::= { ctPriClassifyCompliances 1 }
|
|
|
|
END
|