mibs/MIBS/exalt/QOS
2023-12-05 12:25:34 +01:00

365 lines
13 KiB
Plaintext
Executable File

QOS DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
VlanIdT, QosTagT, EnableStatusT
FROM ExaltComm
radioConfig
FROM ExaltComProducts;
QosPriorityT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable sets Qos priority, the higher number
the higher priority"
SYNTAX INTEGER {
priority0(0),
priority1(1),
priority2(2),
priority3(3)
}
QosModeT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable sets Qos Mode"
SYNTAX INTEGER {
disable(0),
qos-mode-802-1p(4),
qos-mode-diffserv(5),
qos-mode-port(6)
}
QosScheduleModeT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable defines available QoS Scheduler modes"
SYNTAX INTEGER {
weighted-round-robin(0),
hybrid1-mode-3sp-2wrr-1wrr-0wrr(1),
hybrid2-mode-3sp-2sp-1wrr-0wrr(2),
strict-priority(3)
}
QosCos3WeightT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable defines available weights for Queue 3"
SYNTAX INTEGER {
w-8(8),
w-16(16),
w-32(32)
}
QosCos2WeightT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable defines available weights for Queue 2"
SYNTAX INTEGER {
w-4(4),
w-8(8),
w-16(16)
}
QosCos1WeightT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable defines available weights for Queue 1"
SYNTAX INTEGER {
w-2(2),
w-4(4),
w-8(8)
}
QosCos0WeightT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This MIB variable defines available weights for Queue 0"
SYNTAX INTEGER {
w-1(1),
w-2(2),
w-4(4)
}
-- define advSystemConfig here to allow modular inclusion of feature
-- same definition could exist in other features such as Aggregation that belong
-- to advSystemConfig
advSystemConfig OBJECT-IDENTITY
STATUS current
DESCRIPTION "This is the device specific advanced configuration section."
::= { radioConfig 5 }
extAirG2QoS OBJECT-IDENTITY
STATUS current
DESCRIPTION "QOS configuration."
::= { advSystemConfig 8 }
qosDefaultQueue OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default queue to catch all traffic that don't belong to any queue."
::= { extAirG2QoS 1 }
qosEth1Mode OBJECT-TYPE
SYNTAX QosModeT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This setting set the qos mode or disable QoS on ETH1."
::= { extAirG2QoS 2 }
qosEth2Mode OBJECT-TYPE
SYNTAX QosModeT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This setting set the qos mode or disable QoS on ETH2."
::= { extAirG2QoS 3 }
qosDiffServList OBJECT-TYPE
SYNTAX SEQUENCE OF QosDiffServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a table of Qos DiffServ value and proiority."
::= { extAirG2QoS 4 }
qosScheduler OBJECT-IDENTITY
STATUS current
DESCRIPTION "QOS Scheduler configuration."
::= { extAirG2QoS 7 }
qosDiffServEntry OBJECT-TYPE
SYNTAX QosDiffServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is DiffServ table entry."
INDEX {
diffServValue, diffServPriority, diffServEnable
}
::= { qosDiffServList 1 }
QosDiffServEntry ::= SEQUENCE {
diffServValue INTEGER,
diffServPriority QosPriorityT,
diffServEnable EnableStatusT
}
diffServValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the value for the corresponding DiffServ table entry."
::= { qosDiffServEntry 1 }
diffServPriority OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the priority for the corresponding DiffServ table entry."
::= { qosDiffServEntry 2 }
diffServEnable OBJECT-TYPE
SYNTAX EnableStatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the status for the corresponding DiffServ table entry."
::= { qosDiffServEntry 3 }
qosPortETH1Conf OBJECT IDENTIFIER ::= { extAirG2QoS 5 }
qosEth1m802dot1pList OBJECT-TYPE
SYNTAX SEQUENCE OF QosEth1m802dot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a table of Qos 802.1p tag and proiority."
::= { qosPortETH1Conf 1 }
qosEth1m802dot1pEntry OBJECT-TYPE
SYNTAX QosEth1m802dot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a 802.1p table entry."
INDEX {
tagEth1Priority, tagEth1Status
}
::= { qosEth1m802dot1pList 1 }
QosEth1m802dot1pEntry ::= SEQUENCE {
tagEth1Priority
QosPriorityT,
tagEth1Status
EnableStatusT
}
tagEth1Priority OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the priority for the corresponding ETH1 802.1p tag entry."
::= { qosEth1m802dot1pEntry 1 }
tagEth1Status OBJECT-TYPE
SYNTAX EnableStatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the status for the corresponding ETH1 802.1p tag entry."
::= { qosEth1m802dot1pEntry 2 }
qosEth1PortList OBJECT-TYPE
SYNTAX SEQUENCE OF QosEth1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a table of Qos Port mode."
::= { qosPortETH1Conf 2 }
qosEth1PortEntry OBJECT-TYPE
SYNTAX QosEth1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a Port mode table entry."
INDEX {
portEth1Priority, portEth1Status
}
::= { qosEth1PortList 1 }
QosEth1PortEntry ::= SEQUENCE {
portEth1Priority
QosPriorityT,
portEth1Status
EnableStatusT
}
portEth1Priority OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the priority for the corresponding ETH1 Port mode entry."
::= { qosEth1PortEntry 1 }
portEth1Status OBJECT-TYPE
SYNTAX EnableStatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the status for the corresponding ETH1 Port mode entry."
::= { qosEth1PortEntry 2 }
qosPortETH2Conf OBJECT IDENTIFIER ::= { extAirG2QoS 6 }
qosEth2m802dot1pList OBJECT-TYPE
SYNTAX SEQUENCE OF QosEth2m802dot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a table of Qos 802.1p tag and proiority."
::= { qosPortETH2Conf 1 }
qosEth2m802dot1pEntry OBJECT-TYPE
SYNTAX QosEth2m802dot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a 802.1p table entry."
INDEX {
tagEth2Priority, tagEth2Status
}
::= { qosEth2m802dot1pList 1 }
QosEth2m802dot1pEntry ::= SEQUENCE {
tagEth2Priority
QosPriorityT,
tagEth2Status
EnableStatusT
}
tagEth2Priority OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the priority for the corresponding ETH2 802.1p tag entry."
::= { qosEth2m802dot1pEntry 1 }
tagEth2Status OBJECT-TYPE
SYNTAX EnableStatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the status for the corresponding ETH2 802.1p tag entry."
::= { qosEth2m802dot1pEntry 2 }
qosEth2PortList OBJECT-TYPE
SYNTAX SEQUENCE OF QosEth2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a table of Qos Port mode."
::= { qosPortETH2Conf 2 }
qosEth2PortEntry OBJECT-TYPE
SYNTAX QosEth2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is a ETH2 Port mode table entry."
INDEX {
portEth2Priority, portEth2Status
}
::= { qosEth2PortList 1 }
QosEth2PortEntry ::= SEQUENCE {
portEth2Priority
QosPriorityT,
portEth2Status
EnableStatusT
}
portEth2Priority OBJECT-TYPE
SYNTAX QosPriorityT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the priority for the corresponding ETH2 Port mode entry."
::= { qosEth2PortEntry 1 }
portEth2Status OBJECT-TYPE
SYNTAX EnableStatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the status for the corresponding ETH2 Port mode entry."
::= { qosEth2PortEntry 2 }
qosScheduleMode OBJECT-TYPE
SYNTAX QosScheduleModeT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The QoS queues scheduler mode"
::= { qosScheduler 1 }
qosCos3Weight OBJECT-TYPE
SYNTAX QosCos3WeightT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "QoS queue 3 weight."
::= { qosScheduler 2 }
qosCos2Weight OBJECT-TYPE
SYNTAX QosCos2WeightT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "QoS queue 2 weight."
::= { qosScheduler 3 }
qosCos1Weight OBJECT-TYPE
SYNTAX QosCos1WeightT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "QoS queue 1 weight."
::= { qosScheduler 4 }
qosCos0Weight OBJECT-TYPE
SYNTAX QosCos0WeightT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "QoS queue 0 weight."
::= { qosScheduler 5 }
commitQosSettings OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This command allows saving or clear configuration.
Options are: save, clear, correspondingly saving changes to
configuration to the persistent storage or clearing unsaved changes."
::= { extAirG2QoS 1000 }
END