mibs/MIBS/gemds/MDS-IF-IEEE80211-MIB
2023-12-05 12:25:34 +01:00

479 lines
14 KiB
Plaintext

MDS-IF-IEEE80211-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
mdsInterfaces
FROM MDS-ORBIT-SMI-MIB;
mdsIfDot11MIB MODULE-IDENTITY
LAST-UPDATED "201805160000Z" -- May 16, 2018
ORGANIZATION
"GE MDS LLC
http://www.gemds.com"
CONTACT-INFO
"T 1-800-474-0694 (Toll Free in North America)
T 585-242-9600
F 585-242-9620
175 Science Parkway
Rochester, New York 14620
USA"
DESCRIPTION
"The MIB module to describe the IEEE802.11 interface."
REVISION "201805160000Z"
DESCRIPTION
"Updated conformance statments based on smilint."
REVISION "201410200000Z"
DESCRIPTION
"Removed hyphens from enumerations."
REVISION "201304260000Z"
DESCRIPTION
"Initial version."
::= { mdsInterfaces 2 }
mIfDot11MIBObjects OBJECT IDENTIFIER
::= { mdsIfDot11MIB 1 }
mIfDot11Config OBJECT IDENTIFIER
::= { mIfDot11MIBObjects 1 }
mIfDot11Status OBJECT IDENTIFIER
::= { mIfDot11MIBObjects 2 }
-- Textual Conventions
Byte ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "xs:byte"
SYNTAX Integer32 (-128 .. 127)
UnsignedByte ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "xs:unsignedByte"
SYNTAX Unsigned32 (0 .. 255)
UnsignedShort ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "xs:unsignedShort"
SYNTAX Unsigned32 (0 .. 65535)
Ssid ::= TEXTUAL-CONVENTION
DISPLAY-HINT "32a"
STATUS current
DESCRIPTION "IEEE802.11 Service Set Identifier"
SYNTAX OCTET STRING (SIZE (0..32))
MacString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "20a"
STATUS current
DESCRIPTION "MAC Identifier String"
SYNTAX OCTET STRING (SIZE (0..20))
-- Dot11 Status Objects
mIfDot11StatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MIfDot11StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains status of IEEE802.11 interfaces. This table has
a sparse dependent relationship on the ifTable. For each entry in
this table, there exists an entry in the ifTable."
::= { mIfDot11Status 1 }
mIfDot11StatusEntry OBJECT-TYPE
SYNTAX MIfDot11StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains status of a cellular interface."
INDEX { ifIndex }
::= { mIfDot11StatusTable 1 }
MIfDot11StatusEntry ::=
SEQUENCE {
mIfDot11SerialNumber DisplayString,
mIfDot11Mode INTEGER,
mIfDot11TxPower UnsignedByte,
mIfDot11Channel UnsignedByte,
mIfDot11StationSsid Ssid,
mIfDot11StationBssid MacString,
mIfDot11StationRssi Byte,
mIfDot11StationAuthenticated TruthValue,
mIfDot11StationAuthorized TruthValue,
mIfDot11StationInactive Unsigned32,
mIfDot11StationRxbytes Unsigned32,
mIfDot11StationRxpackets Unsigned32,
mIfDot11StationTxbitrate UnsignedShort,
mIfDot11StationTxbytes Unsigned32,
mIfDot11StationTxpackets Unsigned32,
mIfDot11StationTxfailed Unsigned32,
mIfDot11StationTxretries Unsigned32,
mIfDot11ModemType INTEGER
}
mIfDot11SerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IEEE802.11 hardware serial number."
::= { mIfDot11StatusEntry 1 }
mIfDot11Mode OBJECT-TYPE
SYNTAX INTEGER {unknown(0),station(1),accessPoint(2), accessPointStation(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IEEE802.11 operation mode."
::= { mIfDot11StatusEntry 2 }
mIfDot11TxPower OBJECT-TYPE
SYNTAX UnsignedByte
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IEEE802.11 transmit power (dBm)."
::= { mIfDot11StatusEntry 3 }
mIfDot11Channel OBJECT-TYPE
SYNTAX UnsignedByte
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IEEE802.11 channel"
::= { mIfDot11StatusEntry 4 }
-- Dot11 Station Status objects
mIfDot11StationSsid OBJECT-TYPE
SYNTAX Ssid
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SSID of access point the unit is connected to"
::= { mIfDot11StatusEntry 5 }
mIfDot11StationBssid OBJECT-TYPE
SYNTAX MacString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BSSID of access point the unit is connected to"
::= { mIfDot11StatusEntry 6 }
mIfDot11StationRssi OBJECT-TYPE
SYNTAX Byte
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received Signal Strength indicator (dBm)."
::= { mIfDot11StatusEntry 7 }
mIfDot11StationAuthenticated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the station has been authenticated by the AP."
::= { mIfDot11StatusEntry 8 }
mIfDot11StationAuthorized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the station has been authorized by the AP."
::= { mIfDot11StatusEntry 9 }
mIfDot11StationInactive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the station is active."
::= { mIfDot11StatusEntry 10 }
mIfDot11StationRxbytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of bytes received."
::= { mIfDot11StatusEntry 11 }
mIfDot11StationRxpackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets received."
::= { mIfDot11StatusEntry 12 }
mIfDot11StationTxbitrate OBJECT-TYPE
SYNTAX UnsignedShort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current RF transmission bit rate."
::= { mIfDot11StatusEntry 13 }
mIfDot11StationTxbytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of bytes transmitted."
::= { mIfDot11StatusEntry 14 }
mIfDot11StationTxpackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets transmitted."
::= { mIfDot11StatusEntry 15 }
mIfDot11StationTxfailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of transmissions that failed."
::= { mIfDot11StatusEntry 16 }
mIfDot11StationTxretries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of transmission retries."
::= { mIfDot11StatusEntry 17 }
mIfDot11ModemType OBJECT-TYPE
SYNTAX INTEGER {unknown(0),w51(1),w52(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Modem type."
::= { mIfDot11StatusEntry 18 }
-- Dot11 Status Access Point Status objects
mIfDot11StatusApTable OBJECT-TYPE
SYNTAX SEQUENCE OF MifDot11StatusApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The access point table."
::= { mIfDot11Status 2 }
mIfDot11StatusApEntry OBJECT-TYPE
SYNTAX MifDot11StatusApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Access Point status entry."
INDEX { ifIndex, mIfDot11ApSsid }
::= { mIfDot11StatusApTable 1 }
MifDot11StatusApEntry ::=
SEQUENCE {
mIfDot11ApSsid Ssid
}
mIfDot11ApSsid OBJECT-TYPE
SYNTAX Ssid
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current BSS SSID/Network name"
::= { mIfDot11StatusApEntry 1 }
-- Dot11 Status Access Point Client objects
mIfDot11StatusApClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MifDot11StatusApClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The access point client entry."
::= { mIfDot11Status 3 }
mIfDot11StatusApClientEntry OBJECT-TYPE
SYNTAX MifDot11StatusApClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The client connected to the AP."
INDEX { ifIndex, mIfDot11ApSsid, mIfDot11ApClientMac }
::= { mIfDot11StatusApClientTable 1 }
MifDot11StatusApClientEntry ::=
SEQUENCE {
mIfDot11ApClientMac MacString,
mIfDot11ApClientRssi Byte,
mIfDot11ApClientAuthenticated TruthValue,
mIfDot11ApClientAuthorized TruthValue,
mIfDot11ApClientInactive Unsigned32,
mIfDot11ApClientRxbytes Unsigned32,
mIfDot11ApClientRxpackets Unsigned32,
mIfDot11ApClientTxbitrate UnsignedShort,
mIfDot11ApClientTxbytes Unsigned32,
mIfDot11ApClientTxpackets Unsigned32,
mIfDot11ApClientTxfailed Unsigned32,
mIfDot11ApClientTxretries Unsigned32
}
mIfDot11ApClientMac OBJECT-TYPE
SYNTAX MacString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client MAC address."
::= { mIfDot11StatusApClientEntry 1 }
mIfDot11ApClientRssi OBJECT-TYPE
SYNTAX Byte
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client RSSI."
::= { mIfDot11StatusApClientEntry 2 }
mIfDot11ApClientAuthenticated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the client is authenticated."
::= { mIfDot11StatusApClientEntry 3 }
mIfDot11ApClientAuthorized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the client is authorized."
::= { mIfDot11StatusApClientEntry 4 }
mIfDot11ApClientInactive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the client is inactive."
::= { mIfDot11StatusApClientEntry 5 }
mIfDot11ApClientRxbytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of bytes received from the client."
::= { mIfDot11StatusApClientEntry 6 }
mIfDot11ApClientRxpackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets received from the client."
::= { mIfDot11StatusApClientEntry 7 }
mIfDot11ApClientTxbitrate OBJECT-TYPE
SYNTAX UnsignedShort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmission bit rate at which the client is connected to AP."
::= { mIfDot11StatusApClientEntry 8 }
mIfDot11ApClientTxbytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of bytes transmitted to the client."
::= { mIfDot11StatusApClientEntry 9 }
mIfDot11ApClientTxpackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets transmitted to the client."
::= { mIfDot11StatusApClientEntry 10 }
mIfDot11ApClientTxfailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of transmissions to the client that failed."
::= { mIfDot11StatusApClientEntry 11 }
mIfDot11ApClientTxretries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of transmission retries to the client."
::= { mIfDot11StatusApClientEntry 12 }
-- conformance information
mdsIfDot11MIBConformance OBJECT IDENTIFIER ::= { mdsIfDot11MIB 3 }
mdsIfDot11MIBCompliances OBJECT IDENTIFIER ::= { mdsIfDot11MIBConformance 1 }
mdsIfDot11MIBGroups OBJECT IDENTIFIER ::= { mdsIfDot11MIBConformance 2 }
-- compliance statements
mIfDot11Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the MDS-IF-IEEE80211-MIB."
MODULE -- this module
MANDATORY-GROUPS {
mIfDot11StatusCommonGroup,
mIfDot11StatusStationGroup,
mIfDot11StatusApGroup
}
::= { mdsIfDot11MIBCompliances 1 }
-- units of conformance
mIfDot11StatusCommonGroup OBJECT-GROUP
OBJECTS {
mIfDot11SerialNumber,
mIfDot11Mode,
mIfDot11TxPower,
mIfDot11Channel,
mIfDot11ModemType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
common IEEE802.11 interface status."
::= { mdsIfDot11MIBGroups 1 }
mIfDot11StatusStationGroup OBJECT-GROUP
OBJECTS {
mIfDot11StationSsid,
mIfDot11StationRssi,
mIfDot11StationBssid,
mIfDot11StationAuthenticated,
mIfDot11StationAuthorized,
mIfDot11StationInactive,
mIfDot11StationRxbytes,
mIfDot11StationRxpackets,
mIfDot11StationTxbitrate,
mIfDot11StationTxbytes,
mIfDot11StationTxpackets,
mIfDot11StationTxfailed,
mIfDot11StationTxretries
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
IEEE802.11 interface status in station mode."
::= { mdsIfDot11MIBGroups 2 }
mIfDot11StatusApGroup OBJECT-GROUP
OBJECTS {
mIfDot11ApSsid,
mIfDot11ApClientMac,
mIfDot11ApClientRssi,
mIfDot11ApClientAuthenticated,
mIfDot11ApClientAuthorized,
mIfDot11ApClientInactive,
mIfDot11ApClientRxbytes,
mIfDot11ApClientRxpackets,
mIfDot11ApClientTxbitrate,
mIfDot11ApClientTxbytes,
mIfDot11ApClientTxpackets,
mIfDot11ApClientTxfailed,
mIfDot11ApClientTxretries
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
IEEE802.11 interface status in Access Point mode."
::= { mdsIfDot11MIBGroups 3 }
END