3305 lines
89 KiB
Plaintext
3305 lines
89 KiB
Plaintext
LUM-SYSTEM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
RowStatus, DisplayString, TestAndIncr, DateAndTime
|
|
FROM SNMPv2-TC
|
|
lumModules, lumSystemMIB
|
|
FROM LUM-REG
|
|
CommandString, FaultStatus, EnableDisable, OnOff, Platform
|
|
FROM LUM-TC;
|
|
|
|
lumSystemMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201903290000Z" -- March 29th 2019
|
|
ORGANIZATION
|
|
"Infinera Corporation"
|
|
CONTACT-INFO
|
|
"techsupport@infinera.com"
|
|
DESCRIPTION
|
|
"The system MIB.
|
|
|
|
- General
|
|
|
|
- Node parameters
|
|
|
|
- Date and time
|
|
|
|
- License information
|
|
|
|
- RADIUS and TACACS+ authentication configuration
|
|
|
|
- User information
|
|
|
|
"
|
|
REVISION
|
|
"201903290000Z" -- March 29th 2019
|
|
DESCRIPTION
|
|
"Changes made for r32.1:
|
|
- Added sysLoginBanner table"
|
|
REVISION
|
|
"201812210000Z" -- Dec 21th 2018
|
|
DESCRIPTION
|
|
"Changes made for r32.0:
|
|
- Improved the help text for sysSecurityAutoEnableBlockedMgmtPorts
|
|
- Added sysSecurityInstallCertificates
|
|
- Added sysSecurityInstallFactoryDefaultCertificates
|
|
- Added manager table"
|
|
REVISION
|
|
"201809280000Z" -- Sept 28th 2018
|
|
DESCRIPTION
|
|
"Changes made for r31.1:
|
|
- Fix inconsistent use of lower case and
|
|
upper case in long alias in system-security
|
|
table"
|
|
REVISION
|
|
"201712080000Z" -- Dec 8th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r30.0:
|
|
- Added sysSecurityCUFrontICNPortAccess
|
|
sysSecurityChangeCUFrontICNPortAccess
|
|
sysSecuritySubrackICNPortAccess
|
|
sysSecurityChangeSubrackICNPortAccess,
|
|
sysSecurityMgmtAccessProofOfConnStatus,
|
|
sysSecurityMgmtAccessProofOfConnectivity,
|
|
sysSecurityAutoEnableBlockedMgmtPorts,
|
|
sysSecurityBlockedMgmtPortsUnblocked"
|
|
REVISION
|
|
"201706150000Z" -- June 15th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.0:
|
|
- Added attribute sysSecurityFileSystemAccessRestrictions
|
|
- Changed ORGANIZATION and CONTACT-INFO"
|
|
REVISION
|
|
"201611300000Z" -- November 30th 2016
|
|
DESCRIPTION
|
|
"Changes made for release r28.0:
|
|
- Added extra attributes for sysNode group including
|
|
CLLI (Common Language Location Identifier),
|
|
FIC (Facility Interface Code),
|
|
TID (Target ID),
|
|
Latitude and Longitude."
|
|
REVISION
|
|
"201606140000Z" -- Jun 14th 2016
|
|
DESCRIPTION
|
|
"Changes made for release r27:
|
|
- Added attribute sysSecurityLocalCraftAccess in group Security, to show the access
|
|
status to the local ETH-Craft port.
|
|
- Added attribute sysSecurityChangeLocalCraftAccess in group Security to be able to change the access
|
|
to the local ETH-Craft port on CU-SFP/III boards.
|
|
- Added attribute sysSecurityAuthenticationOrder in group Security, to show the authentication order
|
|
currently active in the node.
|
|
- Remove possibility of setting TACACS and RADIUS configurations via snmp."
|
|
REVISION
|
|
"201405160000Z" -- May 16th 2014
|
|
DESCRIPTION
|
|
"Changes made for release r23:
|
|
- Added attribute sysGeneralWriteTest in group General, to be used when TNM connects
|
|
- Attribute sysGeneralTest in group General set to deprecated (prev used when TNM connects)"
|
|
REVISION
|
|
"201311150000Z" -- November 15th 2013
|
|
DESCRIPTION
|
|
"Description for local console access is improved. Help text for user
|
|
name improved."
|
|
REVISION
|
|
"201008030000Z" -- August 3th 2010
|
|
DESCRIPTION
|
|
"Change local console access and radius port numbers."
|
|
REVISION
|
|
"200808050000Z" -- August 5th 2008
|
|
DESCRIPTION
|
|
"Added compliance to indicate web server less vulnerable to hanging."
|
|
REVISION
|
|
"200509140000Z" -- September 14th 2005
|
|
DESCRIPTION
|
|
"Added minimal compliance groups."
|
|
REVISION
|
|
"200410010000Z" -- October 1st 2004
|
|
DESCRIPTION
|
|
"Added table size variables."
|
|
REVISION
|
|
"200406300000Z" -- June 30th 2004
|
|
DESCRIPTION
|
|
"Enabled user group, added wtmp-logging config.."
|
|
REVISION
|
|
"200405260000Z" -- May 26th 2004
|
|
DESCRIPTION
|
|
"Added TACACS+ configuration."
|
|
REVISION
|
|
"200308030000Z" -- September 3rd 2003
|
|
DESCRIPTION
|
|
"Added command for changing local time."
|
|
REVISION
|
|
"200212130000Z" -- December 13th 2002
|
|
DESCRIPTION
|
|
"Added network element type, user name and distinguished name."
|
|
REVISION
|
|
"200204180000Z" -- April 18th 2002
|
|
DESCRIPTION
|
|
"Added systemGeneralTest."
|
|
REVISION
|
|
"200201110000Z" -- January 11th 2002
|
|
DESCRIPTION
|
|
"Added sysNodeUptime."
|
|
REVISION
|
|
"200108140000Z" -- August 14th 2001
|
|
DESCRIPTION
|
|
"Cleaned up some tbd, removed unused definitions.
|
|
Fixed some defaults.
|
|
Added sysNodeRunLevel."
|
|
REVISION
|
|
"200107260000Z" -- July 26th 2001
|
|
DESCRIPTION
|
|
"Added aliases and compliance groups."
|
|
REVISION
|
|
"200104260000Z" -- April 26th 2001
|
|
DESCRIPTION
|
|
"The initial revision of this module."
|
|
::= { lumModules 4 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Conformance area, containing groups and complicance
|
|
-- specifications.
|
|
-- ----------------------------------------------------
|
|
|
|
lumSystemConfs OBJECT IDENTIFIER ::= { lumSystemMIB 1 }
|
|
lumSystemGroups OBJECT IDENTIFIER ::= { lumSystemConfs 1 }
|
|
lumSystemCompl OBJECT IDENTIFIER ::= { lumSystemConfs 2 }
|
|
lumSystemMinimalGroups OBJECT IDENTIFIER ::= { lumSystemConfs 3 }
|
|
lumSystemMinimalCompl OBJECT IDENTIFIER ::= { lumSystemConfs 4 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Root for objects in the system MIB
|
|
-- ----------------------------------------------------
|
|
|
|
lumSystemMIBObjects OBJECT IDENTIFIER ::= { lumSystemMIB 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- This MIB contains the following groups:
|
|
-- ----------------------------------------------------
|
|
|
|
sysGeneral OBJECT IDENTIFIER ::= { lumSystemMIBObjects 1 }
|
|
sysNode OBJECT IDENTIFIER ::= { lumSystemMIBObjects 2 }
|
|
sysHostList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 3 }
|
|
sysTime OBJECT IDENTIFIER ::= { lumSystemMIBObjects 4 }
|
|
sysLogList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 5 }
|
|
sysUserList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 6 }
|
|
sysRadius OBJECT IDENTIFIER ::= { lumSystemMIBObjects 7 }
|
|
sysLicense OBJECT IDENTIFIER ::= { lumSystemMIBObjects 8 }
|
|
sysTacacs OBJECT IDENTIFIER ::= { lumSystemMIBObjects 9 }
|
|
sysAudit OBJECT IDENTIFIER ::= { lumSystemMIBObjects 10 }
|
|
sysSecurity OBJECT IDENTIFIER ::= { lumSystemMIBObjects 11 }
|
|
sysManager OBJECT IDENTIFIER ::= { lumSystemMIBObjects 12 }
|
|
sysLoginBanner OBJECT IDENTIFIER ::= { lumSystemMIBObjects 13 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Textual Conventions
|
|
-- ----------------------------------------------------
|
|
|
|
-- n/a
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- General group
|
|
-- ----------------------------------------------------
|
|
|
|
sysGeneralTestAndIncr OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protection against simultaneous access from
|
|
multiple managers. See SNMPv2-TC.
|
|
|
|
"
|
|
::= { sysGeneral 1 }
|
|
|
|
sysGeneralMibSpecVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIB specification version.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysGeneral 2 }
|
|
|
|
sysGeneralMibImplVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIB implementation version.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysGeneral 3 }
|
|
|
|
sysGeneralLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the state of MIB last changed.
|
|
|
|
"
|
|
::= { sysGeneral 4 }
|
|
|
|
sysGeneralTest OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Object that can be used to verify write access
|
|
(via SNMP).
|
|
|
|
This attribute can be written via SNMP.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { sysGeneral 5 }
|
|
|
|
sysGeneralConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the configuration of the MIB last
|
|
changed.
|
|
|
|
"
|
|
::= { sysGeneral 6 }
|
|
|
|
sysGeneralLoginRecords OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable login records.
|
|
The log can be viewed with the 'last'
|
|
command.
|
|
|
|
off - Login records log disabled.
|
|
|
|
on - Login records log enable.
|
|
|
|
"
|
|
DEFVAL { off }
|
|
::= { sysGeneral 7 }
|
|
|
|
sysGeneralUserTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of rows available in the
|
|
user table.
|
|
|
|
"
|
|
::= { sysGeneral 8 }
|
|
|
|
sysGeneralWriteTest OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object that can be used to verify write access
|
|
(via SNMP).
|
|
|
|
This attribute can be written via SNMP.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysGeneral 9 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Node configuration group
|
|
-- ----------------------------------------------------
|
|
|
|
sysNodeName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively-assigned name for this
|
|
managed node. By convention, this is the nodes
|
|
fully-qualified domain name.
|
|
|
|
The node name may be composed of the following
|
|
characters:
|
|
A to Z ; uppercase characters
|
|
a to z ; lower case characters
|
|
0 to 9 ; numeric characters
|
|
- ; dash
|
|
. ; dot, is used as a separator
|
|
_ ; underscore, supported (but might not be supported by all DNS servers)
|
|
|
|
A host name (label) can start or end with a letter or a number
|
|
A host name (label) MUST NOT start or end with a '-' (dash)
|
|
A host name (label) MUST NOT consist of all numeric values
|
|
A host name (label) can be up to 63 characters
|
|
|
|
"
|
|
DEFVAL { "localhost.localdomain" }
|
|
::= { sysNode 1 }
|
|
|
|
sysNodeContact OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual identification of the contact person
|
|
for this managed node, together with information
|
|
on how to contact this person. Set to the empty
|
|
string if not known.
|
|
Example: 'Joe, e-mail: joe@localhost.localdomain'
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 2 }
|
|
|
|
sysNodeLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical location of this node. Set to the
|
|
empty string if not known.
|
|
Example: 'Rack 5, in the system lab, third floor'
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 3 }
|
|
|
|
sysNodeObjectId OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendors authoritative identification of the
|
|
network management subsystem contained in the
|
|
entity. This value is allocated within the SMI
|
|
enterprises subtree (1.3.6.1.4.1) and provides an
|
|
easy and unambiguous means for determining
|
|
'what kind of box' is being managed.
|
|
|
|
"
|
|
::= { sysNode 4 }
|
|
|
|
sysNodePrimaryNameServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name or IP address of the name server.
|
|
Set to the empty string if not known.
|
|
Example: 'dns.localdomain'
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 5 }
|
|
|
|
sysNodeRunLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined (0),
|
|
halt (1),
|
|
single (2),
|
|
normal (3),
|
|
reboot (4) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Note: This attribute is deprecated!
|
|
|
|
Indicates the runlevel of the software.
|
|
|
|
halt - Shutdown the entire node.
|
|
|
|
single - Stop all applications and enter
|
|
single user mode.
|
|
|
|
normal - Normal operations.
|
|
|
|
reboot - Restart the entire node.
|
|
|
|
tbd: no network?
|
|
tbd: restart with default configuration
|
|
"
|
|
DEFVAL { normal }
|
|
::= { sysNode 6 }
|
|
|
|
sysNodeSecondaryNameServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name or IP address of the name server.
|
|
Set to the empty string if not known.
|
|
Example: 'dns.lumentis.se', '192.168.1.200'
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 7 }
|
|
|
|
sysNodeUptime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The uptime in string format.
|
|
|
|
"
|
|
::= { sysNode 8 }
|
|
|
|
sysNodeNeType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable identifier of the type of node.
|
|
Included in performance measurements reports.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 9 }
|
|
|
|
sysNodeNeUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable network element name.
|
|
Included in performance measurements reports.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 10 }
|
|
|
|
sysNodeNeDistinguishedName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable network element distinguished
|
|
name. Included in performance measurements
|
|
reports.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 11 }
|
|
|
|
sysNodeBootTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Application start time.
|
|
|
|
"
|
|
::= { sysNode 12 }
|
|
|
|
sysNodeLocale OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines what rules should be used when formatting
|
|
and display items that are affected by language and
|
|
locality.
|
|
|
|
The following is currently affected:
|
|
|
|
Date and time
|
|
|
|
Decimal character
|
|
|
|
Unit used for temperatures
|
|
|
|
If locale is set to US English temperatures are
|
|
converted to degrees Fahrenheit.
|
|
|
|
Note: Only the default locale, 'C', is supported at
|
|
the moment.
|
|
|
|
"
|
|
DEFVAL { "C" }
|
|
::= { sysNode 13 }
|
|
|
|
sysNodeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The build version.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 14 }
|
|
|
|
sysNodeCLLI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Common Language Location Identifier of NE.
|
|
Specifies the location
|
|
and function of telecommunications equipment or
|
|
of a relevant location such as international
|
|
border or the location of a supporting equipment,
|
|
such as a pole or a manhole.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 15 }
|
|
|
|
sysNodeFIC OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Identifier Code or
|
|
Facility Interface Code for NE.
|
|
FIC identifies the type of interface that
|
|
the terminal equipment requires for compatible
|
|
interconnection with wireline carrier facilities.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 16 }
|
|
|
|
sysNodeTID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target ID of NE. A unique
|
|
identifier which is a combination of the
|
|
CLLI and FIC (Location+Frame).
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 17 }
|
|
|
|
sysNodeLatitude OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Latitude of the NE. A geographic coordinate
|
|
ranging from -90 to +90 degree specifying
|
|
the north-south position of a node
|
|
on the Earth surface.
|
|
Decimal Degree Representation is used as
|
|
the latitude format.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 18 }
|
|
|
|
sysNodeLongitude OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Longitude of the NE. A geographic
|
|
coordinate ranging from -180 to +180
|
|
degree specifying the east-west position
|
|
of the node on the Earth surface.
|
|
Decimal Degree Representation is used
|
|
as the longitude format.
|
|
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysNode 19 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Host names configuration group
|
|
-- ----------------------------------------------------
|
|
|
|
sysHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The well known host names list.
|
|
|
|
"
|
|
::= { sysHostList 1 }
|
|
|
|
sysHostEntry OBJECT-TYPE
|
|
SYNTAX SysHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in well known host names list.
|
|
|
|
"
|
|
INDEX { sysHostIndex }
|
|
::= { sysHostTable 1 }
|
|
|
|
SysHostEntry ::=
|
|
SEQUENCE {
|
|
sysHostIndex Unsigned32,
|
|
sysHostIpAddress DisplayString,
|
|
sysHostNames DisplayString,
|
|
sysHostRowStatus RowStatus }
|
|
|
|
sysHostIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each host
|
|
entry.
|
|
|
|
"
|
|
::= { sysHostEntry 1 }
|
|
|
|
sysHostIpAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of a well known host.
|
|
Example: '192.168.1.200'
|
|
|
|
"
|
|
::= { sysHostEntry 2 }
|
|
|
|
sysHostNames OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name(s) of a well known host. Set to the
|
|
empty string if not known.
|
|
Example: 'dns.lumentis.se dns'
|
|
|
|
"
|
|
::= { sysHostEntry 3 }
|
|
|
|
sysHostRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows.
|
|
See also SNMPv2-TC.
|
|
|
|
"
|
|
::= { sysHostEntry 4 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Local users configuration group
|
|
-- ----------------------------------------------------
|
|
|
|
sysUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local user list."
|
|
::= { sysUserList 1 }
|
|
|
|
sysUserEntry OBJECT-TYPE
|
|
SYNTAX SysUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the local user list.
|
|
Prompts for the following when
|
|
creating a new user:
|
|
|
|
Password for the current user (the user
|
|
in question or an administrator).
|
|
|
|
New password for the user.
|
|
|
|
New password again.
|
|
|
|
Profile for the new user
|
|
(default operator).
|
|
|
|
"
|
|
INDEX { sysUserIndex }
|
|
::= { sysUserTable 1 }
|
|
|
|
SysUserEntry ::=
|
|
SEQUENCE {
|
|
sysUserIndex Unsigned32,
|
|
sysUserName DisplayString,
|
|
sysUserPasswd DisplayString,
|
|
sysUserDescr DisplayString,
|
|
sysUserLastChangeTime DateAndTime,
|
|
sysUserExpireTime DateAndTime,
|
|
sysUserRowStatus RowStatus,
|
|
sysUserProfile DisplayString,
|
|
sysUserUid Unsigned32,
|
|
sysUserChangePassword CommandString,
|
|
sysUserClearPassword CommandString,
|
|
sysUserDisable CommandString,
|
|
sysUserEnable CommandString,
|
|
sysUserMode INTEGER }
|
|
|
|
sysUserIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each entry.
|
|
|
|
"
|
|
::= { sysUserEntry 1 }
|
|
|
|
sysUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The username must start with a lowercase alphabetical
|
|
character. The rest of the username should be lowercase
|
|
letters (a-z), numbers(0-9) or any of the following
|
|
characters: -._
|
|
It is also possible to add $ as the last character.
|
|
|
|
"
|
|
::= { sysUserEntry 2 }
|
|
|
|
sysUserPasswd OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"tbd description
|
|
tbd examples
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysUserEntry 3 }
|
|
|
|
sysUserDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User description string.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysUserEntry 4 }
|
|
|
|
sysUserLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"tbd description
|
|
tbd examples
|
|
|
|
"
|
|
::= { sysUserEntry 5 }
|
|
|
|
sysUserExpireTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"tbd description
|
|
tbd examples
|
|
|
|
"
|
|
::= { sysUserEntry 6 }
|
|
|
|
sysUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows.
|
|
See also SNMPv2-TC.
|
|
|
|
"
|
|
::= { sysUserEntry 7 }
|
|
|
|
sysUserProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user authority profile.
|
|
|
|
'administrator' - No restrictions.
|
|
|
|
'operator' - Restrictions on user operations
|
|
and some systems management operations.
|
|
Otherwise read/write access.
|
|
|
|
'readonly' - Read only access.
|
|
|
|
"
|
|
DEFVAL { "operator" }
|
|
::= { sysUserEntry 8 }
|
|
|
|
sysUserUid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User id.
|
|
|
|
"
|
|
::= { sysUserEntry 9 }
|
|
|
|
sysUserChangePassword OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Change user password.
|
|
Permitted for the the user in question
|
|
and administrators.
|
|
Asks for the following:
|
|
|
|
User database to update, Local or TACACS.
|
|
The system supports update of either the
|
|
local password or the TACACS password on
|
|
a remote server. This choice is seen only
|
|
when applicable.
|
|
|
|
Password for the current user (the user
|
|
in question or an administrator).
|
|
|
|
New password for the user.
|
|
|
|
New password again.
|
|
|
|
Password can consist of any printable ASCII character
|
|
except for '&' and whitespace. There are no restrictions
|
|
on upper or lower case characters.
|
|
|
|
Password length: 1 - 40 character(s).
|
|
|
|
Default password is set when new user is created.
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysUserEntry 10 }
|
|
|
|
sysUserClearPassword OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear the user password.
|
|
Only permitted for administrators.
|
|
Asks for the following:
|
|
|
|
Password for the current user.
|
|
|
|
Note: Only changes the local password.
|
|
If a RADIUS- or TACACS+-server is in use
|
|
they may override the local configuration.
|
|
|
|
"
|
|
::= { sysUserEntry 11 }
|
|
|
|
sysUserDisable OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disable the user.
|
|
Clear or set the password to make the user
|
|
available again.
|
|
Only permitted for administrators.
|
|
Asks for the following:
|
|
|
|
Password for the current user.
|
|
|
|
Note: Only disables the user locally.
|
|
If a RADIUS- or TACACS+-server is in use
|
|
they may override the local configuration.
|
|
|
|
"
|
|
::= { sysUserEntry 12 }
|
|
|
|
sysUserEnable OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the user.
|
|
Only permitted for administrators.
|
|
Asks for the following:
|
|
|
|
Password for the current user.
|
|
|
|
Note: Only enables the user locally.
|
|
If a RADIUS- or TACACS+-server is in use
|
|
they may override the local configuration.
|
|
|
|
"
|
|
::= { sysUserEntry 13 }
|
|
|
|
sysUserMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative status for the user.
|
|
|
|
Note: Only shows the local user configuration.
|
|
If a RADIUS- or TACACS+-server is in use
|
|
they may override the local configuration.
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { sysUserEntry 14 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Date and time group
|
|
-- ----------------------------------------------------
|
|
|
|
sysTimeLocal OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local date and time.
|
|
|
|
"
|
|
::= { sysTime 1 }
|
|
|
|
sysTimeZone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the time zone in which node
|
|
is located.
|
|
|
|
A few examples:
|
|
|
|
'CET'
|
|
|
|
'EET'
|
|
|
|
'Europe/Stockholm'
|
|
|
|
'Europe/London'
|
|
|
|
'Europe/Copenhagen'
|
|
|
|
'Europe/Berlin'
|
|
|
|
'America/Chicago'
|
|
|
|
'America/Kentucky/Louisville'
|
|
|
|
'Asia/Tokyo'
|
|
|
|
Note: The notation used for naming the
|
|
timezones where the offset to Coordinated
|
|
Universal Time (UTC) is explicitly included,
|
|
i.e. 'GMT-2', may be confusing.
|
|
The offset indicates the time value
|
|
to be added to the local time to get UTC.
|
|
|
|
This means that the the offset is positive
|
|
for timezones west of UTC and and negative
|
|
east of UTC. This is the opposite of how
|
|
timezones are often described.
|
|
For example standard time in Sweden is
|
|
'GMT-1'. On timezone maps zones east of
|
|
UTC are often given a positive offset
|
|
so that the very same zone is called 'GMT+1'.
|
|
|
|
This attribute can be written via SNMP.
|
|
"
|
|
DEFVAL { "CET" }
|
|
::= { sysTime 2 }
|
|
|
|
sysTimePrimaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the primary SNTP/NTP server.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
Example: '192.36.143.150' (time1.stupi.se)
|
|
|
|
"
|
|
::= { sysTime 3 }
|
|
|
|
sysTimeSecondaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the secondary SNTP/NTP server.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
Example: '192.36.143.151' (time2.stupi.se)
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysTime 4 }
|
|
|
|
sysTimeChangeLocalTime OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Change the local date and time.
|
|
|
|
Year - If no century is input the
|
|
current century is set by default.
|
|
|
|
Month - 1 to 12
|
|
|
|
Day - 1 to 31
|
|
|
|
Hour - 0 to 23
|
|
|
|
Minute - 0 to 59
|
|
|
|
Second - 0 to 59
|
|
|
|
Note: Setting of the local time is disabled if
|
|
either the primary or secondary time server
|
|
is set.
|
|
|
|
"
|
|
::= { sysTime 5 }
|
|
|
|
sysTimePrimaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the primary SNTP/NTP server.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
Example: '192.36.143.150' (time1.stupi.se)
|
|
|
|
This attribute can be written via SNMP.
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysTime 6 }
|
|
|
|
sysTimeSecondaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the primary SNTP/NTP server.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
Example: '192.36.143.150' (time1.stupi.se)
|
|
|
|
This attribute can be written via SNMP.
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysTime 7 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Syslog configuration directives group
|
|
-- ----------------------------------------------------
|
|
|
|
sysLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The syslog configuration directives list.
|
|
|
|
"
|
|
::= { sysLogList 1 }
|
|
|
|
sysLogEntry OBJECT-TYPE
|
|
SYNTAX SysLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the syslog configuration
|
|
directives list.
|
|
|
|
"
|
|
INDEX { sysLogIndex }
|
|
::= { sysLogTable 1 }
|
|
|
|
SysLogEntry ::=
|
|
SEQUENCE {
|
|
sysLogIndex Unsigned32,
|
|
sysLogSelection DisplayString,
|
|
sysLogAction DisplayString,
|
|
sysLogRowStatus RowStatus
|
|
}
|
|
|
|
sysLogIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each syslog
|
|
configuration directive.
|
|
|
|
"
|
|
::= { sysLogEntry 1 }
|
|
|
|
sysLogSelection OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"tbd description
|
|
tbd examples
|
|
|
|
"
|
|
::= { sysLogEntry 2 }
|
|
|
|
sysLogAction OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"tbd description
|
|
tbd examples
|
|
|
|
"
|
|
::= { sysLogEntry 3 }
|
|
|
|
sysLogRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Manages creation and deletion of conceptual rows.
|
|
See also SNMPv2-TC.
|
|
|
|
"
|
|
::= { sysLogEntry 4 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Radius group
|
|
-- ----------------------------------------------------
|
|
|
|
sysRadiusPrimaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address for the primary RADIUS-server.
|
|
The port number used is 1812 (accounting,
|
|
port 1813, is not enabled).
|
|
Time-out is 3 seconds.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the primary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysRadius 1 }
|
|
|
|
sysRadiusPrimarySecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shared secret for the primary RADIUS-server.
|
|
|
|
Set to empty string if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the primary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysRadius 2 }
|
|
|
|
sysRadiusSecondaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address for the secondary RADIUS-server.
|
|
The port number used is 1812 (accounting,
|
|
port 1813, is not enabled).
|
|
Time-out is 3 seconds.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the secondary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysRadius 3 }
|
|
|
|
sysRadiusSecondarySecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shared secret for the secondary RADIUS-server.
|
|
|
|
Set to empty string if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the secondary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysRadius 4 }
|
|
|
|
sysRadiusPrimaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the primary RADIUS-server.
|
|
The port number used is 1812 (accounting,
|
|
port 1813, is not enabled).
|
|
Time-out is 3 seconds.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the primary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysRadius 5 }
|
|
|
|
sysRadiusSecondaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the secondary RADIUS-server.
|
|
The port number used is 1812 (accounting,
|
|
port 1813, is not enabled).
|
|
Time-out is 3 seconds.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
If either the server or the secret are not set
|
|
the primary server is disabled.
|
|
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysRadius 6 }
|
|
|
|
sysRadiusPrimaryPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number for the primary RADIUS server.
|
|
"
|
|
DEFVAL { 1812 }
|
|
::= { sysRadius 7 }
|
|
|
|
sysRadiusSecondaryPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number used for the Secondary RADIUS server.
|
|
"
|
|
DEFVAL { 1812 }
|
|
::= { sysRadius 8 }
|
|
|
|
sysRadiusDefaultUserProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user authority profile.
|
|
|
|
'administrator' - No restrictions.
|
|
|
|
'operator' - Restrictions on user operations
|
|
and some systems management operations.
|
|
Otherwise read/write access.
|
|
|
|
'readonly' - Read only access.
|
|
|
|
'no radius template' - The user 'radius' is used as template.
|
|
It should be created if RADIUS server is used.
|
|
Otherwise both primary and secondary servers are disabled.
|
|
|
|
"
|
|
::= { sysRadius 9 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- License group
|
|
-- ----------------------------------------------------
|
|
|
|
sysLicenseExpireDate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the date when the license will expire.
|
|
|
|
"
|
|
::= { sysLicense 1 }
|
|
|
|
sysLicenseCustomer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the name of the customer that holds the license.
|
|
|
|
"
|
|
::= { sysLicense 2 }
|
|
|
|
sysLicenseExpiresSoon OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warns that the license will expire in 7 days,
|
|
or less.
|
|
|
|
"
|
|
::= { sysLicense 3 }
|
|
|
|
sysLicenseExpired OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the license has expired, or the
|
|
license file is missing.
|
|
|
|
"
|
|
::= { sysLicense 4 }
|
|
|
|
sysLicenseExpiredCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
missing (1),
|
|
invalid (2),
|
|
corrupt (3),
|
|
expired (4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes why the license expired alarm is
|
|
raised.
|
|
|
|
none - file is ok, no alarm.
|
|
|
|
missing - the license file is missing.
|
|
|
|
invalid - it is not a valid XML file, or
|
|
some tags are missing.
|
|
|
|
corrupt - the encryption key does not match
|
|
the content of the file.
|
|
|
|
expired - the license has expired.
|
|
|
|
"
|
|
::= { sysLicense 5 }
|
|
|
|
sysLicenseFeatureEws OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
demo (3),
|
|
corrupt (4),
|
|
expired (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disabled - the feature ENM can not be used.
|
|
|
|
enabled - the feature ENM can be used.
|
|
|
|
demo - the feature is only for demo use.
|
|
|
|
corrupt - the encryption key does not match.
|
|
|
|
expired - the feature has expired.
|
|
|
|
"
|
|
::= { sysLicense 6 }
|
|
|
|
sysLicenseFeatureOspf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
demo (3),
|
|
corrupt (4),
|
|
expired (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disabled - the feature OSPF can not be used.
|
|
|
|
enabled - the feature OSPF can be used.
|
|
|
|
demo - the feature is only for demo use.
|
|
|
|
corrupt - the encryption key does not match.
|
|
|
|
expired - the feature has expired.
|
|
|
|
"
|
|
::= { sysLicense 7 }
|
|
|
|
sysLicenseFeatureSnmp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
demo (3),
|
|
corrupt (4),
|
|
expired (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disabled - the feature SNMP can not be used.
|
|
|
|
enabled - the feature SNMP can be used.
|
|
|
|
demo - the feature is only for demo use.
|
|
|
|
corrupt - the encryption key does not match.
|
|
|
|
expired - the feature has expired.
|
|
|
|
"
|
|
::= { sysLicense 8 }
|
|
|
|
sysLicenseFeatureGmpls OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
demo (3),
|
|
corrupt (4),
|
|
expired (5) }
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disabled - the feature GMPLS can not be used.
|
|
|
|
enabled - the feature GMPLS can be used.
|
|
|
|
demo - the feature is only for demo use.
|
|
|
|
corrupt - the encryption key does not match.
|
|
|
|
expired - the feature has expired.
|
|
|
|
"
|
|
::= { sysLicense 9 }
|
|
|
|
sysLicenseFeatureRudb OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
demo (3),
|
|
corrupt (4),
|
|
expired (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disabled - the feature RUDB can not be used.
|
|
|
|
enabled - the feature RUDB can be used.
|
|
|
|
demo - the feature is only for demo use.
|
|
|
|
corrupt - the encryption key does not match.
|
|
|
|
expired - the feature has expired.
|
|
|
|
RUDB means 'remote used database' and include
|
|
TACACS and RADIUS.
|
|
|
|
"
|
|
::= { sysLicense 10 }
|
|
|
|
sysLicenseInstallLicenseFile OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Install a new license file.
|
|
|
|
The license file can either be fetched from a
|
|
remote server or installed from local
|
|
directory.
|
|
|
|
There are 3 cases:
|
|
|
|
1. Remote server. Give server addr and full path
|
|
|
|
installLicenseFile <ip-addr>/<full path>
|
|
|
|
installLicenseFile 192.168.10.27/tftp/license.xml
|
|
|
|
2. From a local directory
|
|
|
|
installLicenseFile <full path>
|
|
|
|
installLicenseFile /root/license.xml
|
|
|
|
3. From the local download directory
|
|
/tftpboot/downloaded
|
|
|
|
installLicenseFile <file name>
|
|
|
|
installLicenseFile license.xml
|
|
|
|
Regardless of the name of the file it will be
|
|
installed as
|
|
|
|
/etc/lumentis/license.xml
|
|
|
|
"
|
|
::= { sysLicense 11 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Tacacs group
|
|
-- ----------------------------------------------------
|
|
|
|
sysTacacsPrimaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address for the primary TACACS+-server.
|
|
The port number used is 49.
|
|
Time-out is 3 seconds.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysTacacs 1 }
|
|
|
|
sysTacacsSecondaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address for the secondary TACACS+-server.
|
|
The port number used is 49.
|
|
Time-out is 3 seconds.
|
|
|
|
Set to the 0.0.0.0 or empty string if not used.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysTacacs 2 }
|
|
|
|
sysTacacsSecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shared secret for the primary TACACS+-server.
|
|
|
|
Set to empty string if not used.
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysTacacs 3 }
|
|
|
|
sysTacacsSecondarySecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shared secret for the secondary TACACS+-server.
|
|
|
|
Set to empty string if not used.
|
|
|
|
"
|
|
DEFVAL { "1234567890" }
|
|
::= { sysTacacs 4 }
|
|
|
|
sysTacacsPrimaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the primary TACACS+-server.
|
|
The port number used is 49.
|
|
Time-out is 3 seconds.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysTacacs 5 }
|
|
|
|
sysTacacsSecondaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the secondary TACACS+-server.
|
|
The port number used is 49.
|
|
Time-out is 3 seconds.
|
|
|
|
Set to 0.0.0.0 if not used.
|
|
|
|
"
|
|
DEFVAL { "0.0.0.0" }
|
|
::= { sysTacacs 6 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Security group
|
|
-- ----------------------------------------------------
|
|
|
|
sysSecurityLocalConsoleAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
bootdisabled (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this parameter is 'disabled' there
|
|
is no way to access the board via RS-232.
|
|
|
|
Note, the setting applies to all boards in all chassis.
|
|
|
|
enabled - Access is allowed
|
|
disabled - No access is allowed.
|
|
The boot monitor and LINUX login are blocked.
|
|
bootdisabled - The boot monitor is blocked while LINUX login is allowed.
|
|
|
|
Only administrator can change the local console access settings.
|
|
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { sysSecurity 1 }
|
|
|
|
sysSecurityChangeLocalConsoleAccess OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to change 'Local Console Access'
|
|
|
|
"
|
|
::= { sysSecurity 2 }
|
|
|
|
sysSecurityIpTablesStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unavailable (1),
|
|
unsecure (2),
|
|
secure (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter shows if a system
|
|
function is enabled in the node.
|
|
|
|
unavailable - package not installed
|
|
unsecure - package installed but not in use
|
|
secure - package installed and in use
|
|
|
|
"
|
|
DEFVAL { unavailable }
|
|
::= { sysSecurity 3 }
|
|
|
|
sysSecurityLocalCraftAccess OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local craft ETH access is used for
|
|
connecting a PC which runs DHCP (Dynamic Host Control Protocol)
|
|
for accessing the web (GUI) interface.
|
|
Use lc in the address bar of the browser.
|
|
The IP address of the DCN also works.
|
|
|
|
When this parameter is 'disabled' there
|
|
is no way to access the board via Craft ETH port.
|
|
|
|
enabled - Access is allowed
|
|
disabled - No access is allowed.
|
|
|
|
Only administrator can change the local craft ETH access settings.
|
|
|
|
The Local Craft ETH runs in 1000Base-T mode (1G Eth) or lower speed
|
|
depending on the auto negotiation.
|
|
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { sysSecurity 4 }
|
|
|
|
sysSecurityChangeLocalCraftAccess OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to change 'Local Craft ETH Access'
|
|
|
|
"
|
|
::= { sysSecurity 5 }
|
|
|
|
sysSecurityAuthenticationOrder OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localFirst (1),
|
|
remoteFirst (2),
|
|
strictRemoteFirst (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter shows the authentication order which is
|
|
used by the system.
|
|
|
|
localFirst - First authenticate with respect to local user database. If it fails, try remote server(s).
|
|
If no remote servers are configured, the authentication will be Local-Only.
|
|
remoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database.
|
|
If the remote authentication is denied, try the local user database.
|
|
strictRemoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database.
|
|
If the remote authentication is denied, stop, access is denied.
|
|
|
|
Only administrator can change the authenticate order settings.
|
|
|
|
"
|
|
DEFVAL { strictRemoteFirst }
|
|
::= { sysSecurity 6 }
|
|
|
|
sysSecurityFileSystemAccessRestrictions OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access rights to the file system of the node element. When 'restricted',
|
|
restrictions to the file system are activated, these restrictions depends
|
|
on the user authority profile.
|
|
|
|
disabled - Default access rights:
|
|
1. Administrators (including root) and operators can execute
|
|
CLI commands bash and telnet.
|
|
2. All users have full file system access using SFTP or
|
|
FTP (if enabled).
|
|
|
|
enabled - Restricted access rights to the file system. The following
|
|
restrictions are applied:
|
|
1. Only administrator users (including root) can execute
|
|
CLI commands bash and telnet.
|
|
2. When using SFTP:
|
|
Readonly and operator users can only access /tftpboot/ and
|
|
its subdirectories.
|
|
Administrator users (including root) have full file system
|
|
access.
|
|
3. When using FTP (if enabled):
|
|
Readonly, operator and all administrator users except root
|
|
can only access /tftpboot/ and its subdirectories.
|
|
The root user have full file system access.
|
|
|
|
When changed, the updated restrictions will be used at following FTP/SFTP
|
|
sessions.
|
|
On CU-SFP/III, active FTP sessions will be aborted at the point when file
|
|
system access is changed.
|
|
|
|
Only administrator can change the file system access restriction settings.
|
|
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { sysSecurity 7 }
|
|
|
|
sysSecurityCUFrontICNPortAccess OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CU front ICN port access is used for
|
|
internal connection between subracks.
|
|
|
|
When this parameter is 'disabled' there
|
|
is no way to access next node via ICN1 or ICN2.
|
|
|
|
enabled - Access is allowed
|
|
disabled - No access is allowed.
|
|
|
|
Only administrator can change the CU front ICN port access settings.
|
|
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { sysSecurity 8 }
|
|
|
|
sysSecurityChangeCUFrontICNPortAccess OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to change 'CU front ICN port access'
|
|
|
|
"
|
|
::= { sysSecurity 9 }
|
|
|
|
sysSecuritySubrackICNPortAccess OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subrack ICN port access is used for
|
|
internal connection between subracks.
|
|
|
|
When this parameter is 'disabled' there
|
|
is no way to access next subrack via ICN3 or ICN4.
|
|
|
|
enabled - Access is allowed
|
|
disabled - No access is allowed.
|
|
|
|
Only administrator can change the Subrack ICN port access settings.
|
|
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { sysSecurity 10 }
|
|
|
|
sysSecurityChangeSubrackICNPortAccess OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to change 'Subrack ICN port access'
|
|
|
|
"
|
|
::= { sysSecurity 11 }
|
|
|
|
sysSecurityMgmtAccessProofOfConnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined (0),
|
|
connected (1),
|
|
disconnected (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter shows if the NE has lost the signal
|
|
or not. The SNMP agent is regularly polling the NE
|
|
and if the NE is not polled within a certain time period
|
|
(set in parameter MgmtAccessProofOfConnectivity)
|
|
we have proof of connectivity loss, and this parameter
|
|
is set to disconnected.
|
|
|
|
undefined - NE connectivity status not determined
|
|
disconnected - NE lost connection
|
|
connected - NE is connected
|
|
|
|
"
|
|
DEFVAL { undefined }
|
|
::= { sysSecurity 12 }
|
|
|
|
sysSecurityMgmtAccessProofOfConnectivity OBJECT-TYPE
|
|
SYNTAX Integer32 (1..720)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of minutes that has to pass with no SNMP agent polls
|
|
before the NE assumes that connectivity is lost.
|
|
|
|
Only administrator can change the proof of connectivity settings.
|
|
|
|
"
|
|
DEFVAL { 120 }
|
|
::= { sysSecurity 13 }
|
|
|
|
sysSecurityAutoEnableBlockedMgmtPorts OBJECT-TYPE
|
|
SYNTAX OnOff
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A setting to turn off/on auto enabling of blocked management ports.
|
|
Management ports in this context means DCN and Local craft ETH (Local craft ETH
|
|
does not exist on all platforms). If the network element has not been polled by the SNMP agent
|
|
(DNA-M) within the time that is set by the attribute Proof of Connectivity, the
|
|
blocked management ports are automatically enabled (deblocked/unblocked).
|
|
If SNMP polling is detected again by the network element (after a discontinuity) the ports will
|
|
revert to their blocked state.
|
|
|
|
on - The function to auto enable blocked ports is turned on.
|
|
|
|
off - The function to auto enable blocked ports is turned off.
|
|
|
|
Only administrator can change the auto enable blocked management ports settings.
|
|
|
|
"
|
|
DEFVAL { on }
|
|
::= { sysSecurity 14 }
|
|
|
|
sysSecurityBlockedMgmtPortsUnblocked OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Blocked management ports (i.e. local craft and DCN ports) are unblocked.
|
|
The blocking is overridden due to loss of management connectivity (SNMP).
|
|
|
|
"
|
|
::= { sysSecurity 15 }
|
|
|
|
sysSecurityInstallCertificates OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to install certificates
|
|
installCertificates <private-key-file-path> <public-key-file-path> <cert-chain-file-path>
|
|
Each <file-path> is absolute (starting with '/').
|
|
After this command, the files are automatically deleted.
|
|
|
|
"
|
|
::= { sysSecurity 16 }
|
|
|
|
sysSecurityInstallFactoryDefaultCertificates OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Procedure to install factory default certificates.
|
|
|
|
"
|
|
::= { sysSecurity 17 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Manager group
|
|
-- ----------------------------------------------------
|
|
|
|
sysManagerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of Centralized Security Manager (DNA-M).
|
|
This attribute shall NOT be set locally.
|
|
The DNA-M managing the security features of the NE will set this.
|
|
Requires administrator privileges to change.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysManager 1 }
|
|
|
|
sysManagerIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of Centralized Security Manager (DNA-M).
|
|
This attribute shall NOT be set locally.
|
|
The DNA-M managing the security features of the NE will set this.
|
|
Requires administrator privileges to change.
|
|
|
|
"
|
|
::= { sysManager 2 }
|
|
|
|
sysManagerPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the Security Policy, defined in DNA-M, that is assigned to
|
|
this NE.
|
|
This attribute shall NOT be set locally.
|
|
The DNA-M managing the security features of the NE will set this.
|
|
Requires administrator privileges to change.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysManager 3 }
|
|
|
|
sysManagerPlatform OBJECT-TYPE
|
|
SYNTAX Platform
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NE platform information.
|
|
Used by Centralized Security Manager (DNA-M).
|
|
|
|
"
|
|
DEFVAL { unknown }
|
|
::= { sysManager 4 }
|
|
|
|
sysManagerFcmComplianceVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Feature Capability Matrix Compliance version.
|
|
Used by Centralized Security Manager (DNA-M).
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysManager 5 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- loginBanner group
|
|
-- ----------------------------------------------------
|
|
|
|
sysLoginBannerContent OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login banner can be used to display pre-login
|
|
information such as system information or a warning.
|
|
The login banner requires administrator privileges
|
|
to change and can be set through CLI, GUI or DNA-M.
|
|
Characters 0x20 to 0x25 and 0x27 to 0x7E in
|
|
ISO/IEC 8859-1 are accepted/valid. Ampersand ('&')
|
|
0x26 is not allowed (this is a general XTM restriction
|
|
for text fields). New-line shall be encoded as '\\n' if
|
|
the message is set through CLI.
|
|
|
|
Min length: 0 character.
|
|
|
|
Max length: 1020 characters.
|
|
|
|
Although formal SNMP type is restricted to 128
|
|
characters, the system can cope with 1020 characters
|
|
when managed from CLI/GUI or DNA-M.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { sysLoginBanner 1 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Notifications
|
|
-- ----------------------------------------------------
|
|
|
|
-- n/a
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
sysGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralTestAndIncr,
|
|
sysGeneralMibSpecVersion,
|
|
sysGeneralMibImplVersion
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general system MIB objects."
|
|
::= { lumSystemGroups 1 }
|
|
|
|
sysNodeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeRunLevel }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects."
|
|
::= { lumSystemGroups 2 }
|
|
|
|
sysHostListGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysHostIndex,
|
|
sysHostIpAddress,
|
|
sysHostNames,
|
|
sysHostRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name table."
|
|
::= { lumSystemGroups 3 }
|
|
|
|
sysTimeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal,
|
|
sysTimeZone,
|
|
sysTimePrimaryServer,
|
|
sysTimeSecondaryServer }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node time properties."
|
|
::= { lumSystemGroups 4 }
|
|
|
|
sysLogListGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysLogIndex,
|
|
sysLogSelection,
|
|
sysLogAction,
|
|
sysLogRowStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Log configuration directives."
|
|
::= { lumSystemGroups 5 }
|
|
|
|
sysGeneralGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general system MIB objects v2."
|
|
::= { lumSystemGroups 6 }
|
|
|
|
sysNodeGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeRunLevel,
|
|
sysNodeSecondaryNameServer }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V2."
|
|
::= { lumSystemGroups 7 }
|
|
|
|
sysUserGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysUserIndex,
|
|
sysUserName,
|
|
sysUserPasswd,
|
|
sysUserDescr,
|
|
sysUserLastChangeTime,
|
|
sysUserExpireTime,
|
|
sysUserRowStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The user table objects."
|
|
::= { lumSystemGroups 8 }
|
|
|
|
sysNodeGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeRunLevel,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V3."
|
|
::= { lumSystemGroups 9 }
|
|
|
|
sysGeneralGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralTest
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The general system MIB objects v3."
|
|
::= { lumSystemGroups 10 }
|
|
|
|
sysNodeGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeRunLevel,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime,
|
|
sysNodeNeDistinguishedName,
|
|
sysNodeNeUserName,
|
|
sysNodeNeType }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V4."
|
|
::= { lumSystemGroups 11 }
|
|
|
|
sysGeneralGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralTest,
|
|
sysGeneralConfigLastChangeTime
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general system MIB objects v4."
|
|
::= { lumSystemGroups 12 }
|
|
|
|
sysNodeGroupV5 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime,
|
|
sysNodeNeDistinguishedName,
|
|
sysNodeNeUserName,
|
|
sysNodeNeType,
|
|
sysNodeBootTime }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V5."
|
|
::= { lumSystemGroups 15 }
|
|
|
|
sysRadiusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimaryServer,
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondaryServer,
|
|
sysRadiusSecondarySecret }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The RADIUS MIB objects."
|
|
::= { lumSystemGroups 16 }
|
|
|
|
sysNodeGroupV6 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime,
|
|
sysNodeNeDistinguishedName,
|
|
sysNodeNeUserName,
|
|
sysNodeNeType,
|
|
sysNodeBootTime,
|
|
sysNodeLocale }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V6."
|
|
::= { lumSystemGroups 17 }
|
|
|
|
sysTimeGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal,
|
|
sysTimeZone,
|
|
sysTimePrimaryServer,
|
|
sysTimeSecondaryServer,
|
|
sysTimeChangeLocalTime }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node time properties V2."
|
|
::= { lumSystemGroups 18 }
|
|
|
|
sysLicenseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysLicenseExpireDate,
|
|
sysLicenseCustomer,
|
|
sysLicenseExpiresSoon,
|
|
sysLicenseExpired,
|
|
sysLicenseExpiredCause,
|
|
sysLicenseFeatureEws,
|
|
sysLicenseFeatureEws,
|
|
sysLicenseFeatureOspf,
|
|
sysLicenseFeatureSnmp,
|
|
sysLicenseFeatureGmpls,
|
|
sysLicenseFeatureRudb,
|
|
sysLicenseInstallLicenseFile }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node license properties V1."
|
|
::= { lumSystemGroups 19 }
|
|
|
|
sysTacacsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTacacsPrimaryServer,
|
|
sysTacacsSecondaryServer,
|
|
sysTacacsSecret }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The TACACS+ MIB objects."
|
|
::= { lumSystemGroups 20 }
|
|
|
|
sysUserGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysUserIndex,
|
|
sysUserName,
|
|
sysUserDescr,
|
|
sysUserProfile,
|
|
sysUserUid }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user table objects v2."
|
|
::= { lumSystemGroups 21 }
|
|
|
|
sysGeneralGroupV5 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralTest,
|
|
sysGeneralConfigLastChangeTime,
|
|
sysGeneralLoginRecords
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general system MIB objects v5."
|
|
::= { lumSystemGroups 22 }
|
|
|
|
sysUserGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysUserIndex,
|
|
sysUserName,
|
|
sysUserDescr,
|
|
sysUserProfile,
|
|
sysUserUid,
|
|
sysUserChangePassword,
|
|
sysUserClearPassword,
|
|
sysUserDisable }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The user table objects v3."
|
|
::= { lumSystemGroups 23 }
|
|
|
|
sysTacacsGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTacacsPrimaryServer,
|
|
sysTacacsSecondaryServer,
|
|
sysTacacsSecret,
|
|
sysTacacsSecondarySecret }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The TACACS+ MIB objects v2."
|
|
::= { lumSystemGroups 24 }
|
|
|
|
sysGeneralGroupV6 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralTest,
|
|
sysGeneralConfigLastChangeTime,
|
|
sysGeneralLoginRecords,
|
|
sysGeneralUserTableSize }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general system MIB objects v6."
|
|
::= { lumSystemGroups 25 }
|
|
|
|
sysUserGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysUserIndex,
|
|
sysUserName,
|
|
sysUserDescr,
|
|
sysUserProfile,
|
|
sysUserUid,
|
|
sysUserChangePassword,
|
|
sysUserClearPassword,
|
|
sysUserDisable,
|
|
sysUserMode,
|
|
sysUserEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user table objects v4."
|
|
::= { lumSystemGroups 26 }
|
|
|
|
sysSecurityGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The security group objects v1 (7.0)."
|
|
::= { lumSystemGroups 27 }
|
|
|
|
sysNodeGroupV7 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime,
|
|
sysNodeNeDistinguishedName,
|
|
sysNodeNeUserName,
|
|
sysNodeNeType,
|
|
sysNodeBootTime,
|
|
sysNodeLocale,
|
|
sysNodeVersion }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The node properties objects V7."
|
|
::= { lumSystemGroups 28 }
|
|
|
|
sysTacacsGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTacacsSecret,
|
|
sysTacacsSecondarySecret,
|
|
sysTacacsPrimaryIpAddress,
|
|
sysTacacsSecondaryIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TACACS+ MIB objects v3."
|
|
::= { lumSystemGroups 29 }
|
|
|
|
sysRadiusGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The RADIUS MIB objects."
|
|
::= { lumSystemGroups 30 }
|
|
|
|
sysTimeGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal,
|
|
sysTimeZone,
|
|
sysTimeChangeLocalTime,
|
|
sysTimePrimaryIpAddress,
|
|
sysTimeSecondaryIpAddress}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node time properties V3."
|
|
::= { lumSystemGroups 31 }
|
|
|
|
sysSecurityGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess,
|
|
sysSecurityIpTablesStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The security group objects v2 (12.0)."
|
|
::= { lumSystemGroups 32 }
|
|
|
|
sysRadiusGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress,
|
|
sysRadiusPrimaryPort,
|
|
sysRadiusSecondaryPort }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The RADIUS MIB objects V3."
|
|
::= { lumSystemGroups 33 }
|
|
|
|
sysRadiusGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress,
|
|
sysRadiusPrimaryPort,
|
|
sysRadiusSecondaryPort,
|
|
sysRadiusDefaultUserProfile}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS MIB objects V4."
|
|
::= { lumSystemGroups 34 }
|
|
|
|
sysGeneralGroupV7 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralConfigLastChangeTime,
|
|
sysGeneralLoginRecords,
|
|
sysGeneralUserTableSize,
|
|
sysGeneralWriteTest }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The general system MIB objects v7."
|
|
::= { lumSystemGroups 35 }
|
|
|
|
sysSecurityGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess,
|
|
sysSecurityLocalCraftAccess,
|
|
sysSecurityChangeLocalCraftAccess,
|
|
sysSecurityIpTablesStatus,
|
|
sysSecurityAuthenticationOrder}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The security group objects v3 (27.0)."
|
|
::= { lumSystemGroups 36 }
|
|
|
|
sysNodeGroupV8 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeContact,
|
|
sysNodeLocation,
|
|
sysNodeObjectId,
|
|
sysNodePrimaryNameServer,
|
|
sysNodeSecondaryNameServer,
|
|
sysNodeUptime,
|
|
sysNodeNeDistinguishedName,
|
|
sysNodeNeUserName,
|
|
sysNodeNeType,
|
|
sysNodeBootTime,
|
|
sysNodeLocale,
|
|
sysNodeVersion,
|
|
sysNodeCLLI,
|
|
sysNodeFIC,
|
|
sysNodeTID,
|
|
sysNodeLatitude,
|
|
sysNodeLongitude}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The node properties objects V8 (28.0)."
|
|
::= { lumSystemGroups 37 }
|
|
|
|
sysSecurityGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess,
|
|
sysSecurityLocalCraftAccess,
|
|
sysSecurityChangeLocalCraftAccess,
|
|
sysSecurityIpTablesStatus,
|
|
sysSecurityAuthenticationOrder,
|
|
sysSecurityFileSystemAccessRestrictions}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The security group objects v4 (29.0)."
|
|
::= { lumSystemGroups 38 }
|
|
|
|
sysSecurityGroupV5 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess,
|
|
sysSecurityLocalCraftAccess,
|
|
sysSecurityChangeLocalCraftAccess,
|
|
sysSecurityIpTablesStatus,
|
|
sysSecurityAuthenticationOrder,
|
|
sysSecurityFileSystemAccessRestrictions,
|
|
sysSecurityCUFrontICNPortAccess,
|
|
sysSecurityChangeCUFrontICNPortAccess,
|
|
sysSecuritySubrackICNPortAccess,
|
|
sysSecurityChangeSubrackICNPortAccess,
|
|
sysSecurityMgmtAccessProofOfConnStatus,
|
|
sysSecurityMgmtAccessProofOfConnectivity,
|
|
sysSecurityAutoEnableBlockedMgmtPorts,
|
|
sysSecurityBlockedMgmtPortsUnblocked }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The security group objects v5 (30.0)."
|
|
::= { lumSystemGroups 39 }
|
|
|
|
sysSecurityGroupV6 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysSecurityLocalConsoleAccess,
|
|
sysSecurityChangeLocalConsoleAccess,
|
|
sysSecurityLocalCraftAccess,
|
|
sysSecurityChangeLocalCraftAccess,
|
|
sysSecurityIpTablesStatus,
|
|
sysSecurityAuthenticationOrder,
|
|
sysSecurityFileSystemAccessRestrictions,
|
|
sysSecurityCUFrontICNPortAccess,
|
|
sysSecurityChangeCUFrontICNPortAccess,
|
|
sysSecuritySubrackICNPortAccess,
|
|
sysSecurityChangeSubrackICNPortAccess,
|
|
sysSecurityMgmtAccessProofOfConnStatus,
|
|
sysSecurityMgmtAccessProofOfConnectivity,
|
|
sysSecurityAutoEnableBlockedMgmtPorts,
|
|
sysSecurityBlockedMgmtPortsUnblocked,
|
|
sysSecurityInstallCertificates,
|
|
sysSecurityInstallFactoryDefaultCertificates }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The security group objects v6 (32.0)."
|
|
::= { lumSystemGroups 40 }
|
|
|
|
sysManagerGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysManagerName,
|
|
sysManagerIPAddress,
|
|
sysManagerPolicyName,
|
|
sysManagerPlatform }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The manager group objects v1 (32.0)."
|
|
::= { lumSystemGroups 41 }
|
|
|
|
sysLoginBannerGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysLoginBannerContent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The loginBanner group objects v1 (32.1)."
|
|
::= { lumSystemGroups 42 }
|
|
|
|
sysManagerGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysManagerName,
|
|
sysManagerIPAddress,
|
|
sysManagerPolicyName,
|
|
sysManagerPlatform,
|
|
sysManagerFcmComplianceVersion}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager group objects v2 (32.1)."
|
|
::= { lumSystemGroups 43 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumSystemBasicComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V1."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroup,
|
|
sysNodeGroup,
|
|
sysTimeGroup,
|
|
sysLogListGroup,
|
|
sysHostListGroup
|
|
}
|
|
::= { lumSystemCompl 1 }
|
|
|
|
lumSystemBasicComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V2."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV2,
|
|
sysTimeGroup,
|
|
sysNodeGroup }
|
|
::= { lumSystemCompl 2 }
|
|
|
|
lumSystemBasicComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V3."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV2,
|
|
sysTimeGroup,
|
|
sysNodeGroupV2,
|
|
sysUserGroup }
|
|
::= { lumSystemCompl 3 }
|
|
|
|
lumSystemBasicComplV4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V4."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV2,
|
|
sysTimeGroup,
|
|
sysNodeGroupV3,
|
|
sysUserGroup }
|
|
::= { lumSystemCompl 4 }
|
|
|
|
lumSystemBasicComplV5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V5."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV3,
|
|
sysTimeGroup,
|
|
sysNodeGroupV3,
|
|
sysUserGroup }
|
|
::= { lumSystemCompl 5 }
|
|
|
|
lumSystemBasicComplV6 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V6."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV3,
|
|
sysTimeGroup,
|
|
sysNodeGroupV4,
|
|
sysUserGroup }
|
|
::= { lumSystemCompl 6 }
|
|
|
|
lumSystemBasicComplV7 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V7."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroup,
|
|
sysNodeGroupV5,
|
|
sysUserGroup }
|
|
::= { lumSystemCompl 7 }
|
|
|
|
lumSystemBasicComplV8 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V8."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroup,
|
|
sysNodeGroupV5,
|
|
sysUserGroup,
|
|
sysRadiusGroup }
|
|
::= { lumSystemCompl 8 }
|
|
|
|
lumSystemBasicComplV9 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V9."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroup,
|
|
sysNodeGroupV6,
|
|
sysUserGroup,
|
|
sysRadiusGroup }
|
|
::= { lumSystemCompl 9 }
|
|
|
|
lumSystemBasicComplV10 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V10 (2.2)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup }
|
|
::= { lumSystemCompl 10 }
|
|
|
|
lumSystemBasicComplV11 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V11."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroup }
|
|
::= { lumSystemCompl 11 }
|
|
|
|
lumSystemBasicComplV12 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V12."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV4,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroup,
|
|
sysUserGroupV2 }
|
|
::= { lumSystemCompl 12 }
|
|
|
|
lumSystemBasicComplV13 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V13."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV5,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroup,
|
|
sysUserGroupV2 }
|
|
::= { lumSystemCompl 13 }
|
|
|
|
lumSystemBasicComplV14 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V14."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV2,
|
|
sysUserGroupV3 }
|
|
::= { lumSystemCompl 14 }
|
|
|
|
lumSystemBasicComplV15 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V15 (4.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV2,
|
|
sysUserGroupV4 }
|
|
::= { lumSystemCompl 15 }
|
|
|
|
lumSystemBasicComplV16 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V16 (7.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV6,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV2,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV1 }
|
|
::= { lumSystemCompl 16 }
|
|
|
|
lumSystemBasicComplV17 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V17 (10.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV2,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroup,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV2,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV1 }
|
|
::= { lumSystemCompl 17 }
|
|
|
|
lumSystemBasicComplV18 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V18 (11.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroupV2,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV1 }
|
|
::= { lumSystemCompl 18 }
|
|
|
|
lumSystemBasicComplV19 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V19 (12.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroupV2,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV2 }
|
|
::= { lumSystemCompl 19 }
|
|
|
|
lumSystemBasicComplV20 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V20 (13.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroupV3,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV2 }
|
|
::= { lumSystemCompl 20 }
|
|
|
|
lumSystemBasicComplV21 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V21 (13.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV6,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV2 }
|
|
::= { lumSystemCompl 21 }
|
|
|
|
|
|
lumSystemBasicComplV22 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V22 (23.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV7,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV2 }
|
|
::= { lumSystemCompl 22 }
|
|
|
|
lumSystemBasicComplV23 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V23 (28.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV2 }
|
|
::= { lumSystemCompl 23 }
|
|
|
|
lumSystemBasicComplV24 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V24 (29.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV4 }
|
|
::= { lumSystemCompl 24 }
|
|
|
|
lumSystemBasicComplV25 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V25 (30.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV5 }
|
|
::= { lumSystemCompl 25 }
|
|
|
|
lumSystemBasicComplV26 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V26 (30.1).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV5 }
|
|
::= { lumSystemCompl 26 }
|
|
|
|
lumSystemBasicComplV27 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V27 (32.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV6 }
|
|
::= { lumSystemCompl 27 }
|
|
|
|
lumSystemBasicComplV28 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V28 (32.0).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV6,
|
|
sysManagerGroupV1 }
|
|
::= { lumSystemCompl 28 }
|
|
|
|
lumSystemBasicComplV29 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the system MIB V29 (32.1).
|
|
Used to indicate web-server less vulnerable to hanging."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralGroupV7,
|
|
sysTimeGroupV3,
|
|
sysNodeGroupV8,
|
|
sysRadiusGroupV4,
|
|
sysLicenseGroup,
|
|
sysTacacsGroupV3,
|
|
sysUserGroupV4,
|
|
sysSecurityGroupV6,
|
|
sysManagerGroupV2,
|
|
sysLoginBannerGroupV1 }
|
|
::= { lumSystemCompl 29 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
sysGeneralMinimalGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysGeneralLastChangeTime,
|
|
sysGeneralConfigLastChangeTime }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimal general system MIB objects v1."
|
|
::= { lumSystemMinimalGroups 1 }
|
|
|
|
sysNodeMinimalGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeNeUserName,
|
|
sysNodeBootTime }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node properties objects v1."
|
|
::= { lumSystemMinimalGroups 2 }
|
|
|
|
sysTimeMinimalGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node time properties v1."
|
|
::= { lumSystemMinimalGroups 3 }
|
|
|
|
sysNodeMinimalGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysNodeName,
|
|
sysNodeNeUserName,
|
|
sysNodeLocation,
|
|
sysNodeContact,
|
|
sysNodeBootTime }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimal node properties objects v2."
|
|
::= { lumSystemMinimalGroups 4 }
|
|
|
|
sysTimeMinimalGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal,
|
|
sysTimeZone,
|
|
sysTimePrimaryServer }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node time properties v2."
|
|
::= { lumSystemMinimalGroups 5 }
|
|
|
|
sysRadiusMinimalGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimaryServer,
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondaryServer,
|
|
sysRadiusSecondarySecret }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node RADIUS MIB objects v1."
|
|
::= { lumSystemMinimalGroups 6 }
|
|
|
|
|
|
sysTimeMinimalGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysTimeLocal,
|
|
sysTimeZone,
|
|
sysTimePrimaryIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimal node time properties v3."
|
|
::= { lumSystemMinimalGroups 7 }
|
|
|
|
sysRadiusMinimalGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node RADIUS MIB objects v2."
|
|
::= { lumSystemMinimalGroups 8 }
|
|
|
|
sysRadiusMinimalGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress,
|
|
sysRadiusPrimaryPort,
|
|
sysRadiusSecondaryPort }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimal node RADIUS MIB objects v3."
|
|
::= { lumSystemMinimalGroups 9 }
|
|
|
|
sysRadiusMinimalGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
sysRadiusPrimarySecret,
|
|
sysRadiusSecondarySecret,
|
|
sysRadiusPrimaryIpAddress,
|
|
sysRadiusSecondaryIpAddress,
|
|
sysRadiusPrimaryPort,
|
|
sysRadiusSecondaryPort,
|
|
sysRadiusDefaultUserProfile}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimal node RADIUS MIB objects v4."
|
|
::= { lumSystemMinimalGroups 10 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Minimal Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumSystemMinimalComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V1."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV1,
|
|
sysNodeMinimalGroupV1 }
|
|
::= { lumSystemMinimalCompl 1 }
|
|
|
|
lumSystemMinimalComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V2."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV1,
|
|
sysNodeMinimalGroupV2 }
|
|
::= { lumSystemMinimalCompl 2 }
|
|
|
|
lumSystemMinimalComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V3."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV2,
|
|
sysNodeMinimalGroupV2,
|
|
sysRadiusMinimalGroupV1 }
|
|
::= { lumSystemMinimalCompl 3 }
|
|
|
|
lumSystemMinimalComplV4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V4."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV3,
|
|
sysNodeMinimalGroupV2,
|
|
sysRadiusMinimalGroupV2 }
|
|
::= { lumSystemMinimalCompl 4 }
|
|
|
|
lumSystemMinimalComplV5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V5."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV3,
|
|
sysNodeMinimalGroupV2,
|
|
sysRadiusMinimalGroupV3 }
|
|
::= { lumSystemMinimalCompl 5 }
|
|
|
|
lumSystemMinimalComplV6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V6."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV3,
|
|
sysNodeMinimalGroupV2,
|
|
sysRadiusMinimalGroupV4 }
|
|
::= { lumSystemMinimalCompl 6}
|
|
|
|
|
|
lumSystemMinimalComplV7 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimal implementation requirements for the system MIB V7 (30.1)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
sysGeneralMinimalGroupV1,
|
|
sysTimeMinimalGroupV3,
|
|
sysNodeMinimalGroupV2,
|
|
sysRadiusMinimalGroupV4 }
|
|
::= { lumSystemMinimalCompl 7}
|
|
|
|
END
|
|
|