mibs/MIBS/junos/BGP4-V2-MIB-JUNIPER
2023-12-05 12:25:34 +01:00

4252 lines
138 KiB
Plaintext

-- *****************************************************************************
-- draft-ietf-idr-bgp4-mibv2-03.txt
--
-- Copyright (c) 2002 The Internet Society.
-- Copyright (c) 2003-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- Juniper Networks edits to this MIB: *** JNX ***
-- 09/09/03 Assigned an enterprise experimental OID and added "jnx" prefix.
-- Fixed AUGMENTS entry for the bgpM2CfgPeerConfedMemberTable.
-- Added bgpM2PeerRoutingInstance to bgpM2PeerTable.
-- Added REVISION clause to MODULE-IDENTITY.
-- Fixed conformance clauses.
-- 12/12/17 Redefines the value for jnxBgpM2PrefixesInPrefixesRejected
-- so that it conforms to the definition.
-- Add a new counter in the same sequence to return the number
-- of activeprefixes received from the peer
-- jnxBgpM2PrefixInPrefixesActive.
-- *****************************************************************************
BGP4-V2-MIB-JUNIPER DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, Unsigned32, Integer32, TimeTicks -- *** JNX ***
FROM SNMPv2-SMI
-- Note that the following reference to INET-ADDRESS-MIB
-- refers to the version as published in the RFC 2851
-- update internet draft.
InetAddressType, InetAddress, InetPortNumber,
InetAutonomousSystemNumber, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
-- Juniper specific *** JNX ***
jnxBgpM2Experiment -- *** JNX ***
FROM JUNIPER-EXPERIMENT-MIB -- *** JNX ***
TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType,
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
jnxBgpM2 MODULE-IDENTITY
LAST-UPDATED "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX ***
ORGANIZATION "IETF IDR Working Group"
CONTACT-INFO "E-mail: idr@merit.net
Jeffrey Haas (Editor)
825 Victors Way, Suite 100
Ann Arbor, MI 48108
Tel: +1 734 222-1600
Fax: +1 734 222-1602
E-mail: jhaas@nexthop.com"
DESCRIPTION
"This MIB module defines management objects for
the Border Gateway Protocol, Version 4."
REVISION "201212170000Z" -- *** JNX ***
DESCRIPTION -- *** JNX ***
"This change redefines the value returned for the -- *** JNX ***
variable jnxBgpM2PrefixesInPrefixesRejected so that -- *** JNX ***
it conforms to the definition. -- *** JNX ***
It also adds a new counter in the same sequence to -- *** JNX ***
return the number of active prefixes received from -- *** JNX ***
the peer: jnxBgpM2PrefixInPrefixesActive" -- *** JNX ***
REVISION "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX ***
DESCRIPTION -- *** JNX ***
"This is a proprietary implementation of the -- *** JNX ***
draft-ietf-idr-bgp4-mibv2-03.txt MIB as written by -- *** JNX ***
the IETF Inter-Domain Routing Working Group. -- *** JNX ***
This Juniper experimental MIB will be retired when a -- *** JNX ***
valid oid branch is assigned." -- *** JNX ***
REVISION "200211040000Z" -- *** JNX ***
DESCRIPTION -- *** JNX ***
"draft-ietf-idr-bgp4-mibv2-03.txt version written by -- *** JNX ***
the IETF Inter-Domain Routing Working Group." -- *** JNX ***
-- ::= { mib-2 XXX } *** JNX ***
::= { jnxBgpM2Experiment 1 } -- *** JNX ***
JnxBgpM2Identifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d."
STATUS current
DESCRIPTION
"The representation of a BGP Identifier. The BGP
Identifier should be represented in the OCTET STRING
as with the first OCTET of the string containing
the first OCTET of the BGP Identifier received or sent
in the OPEN packet and so on.
Even though the BGP Identifier is trending away from
an IP address it is still displayed as if it was one,
even when it would be an illegal IP address."
SYNTAX OCTET STRING(SIZE (4))
JnxBgpM2Safi ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP Safi"
SYNTAX Unsigned32(0..255)
JnxBgpM2Community ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d:"
STATUS current
DESCRIPTION
"The representation of a BGP Community."
SYNTAX OCTET STRING(SIZE(4))
JnxBgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"The representation of a BGP Extended Community."
SYNTAX OCTET STRING(SIZE(8))
jnxBgpM2BaseScalars
OBJECT IDENTIFIER ::= { jnxBgpM2 1 }
--
-- Notifications
--
jnxBgpM2BaseNotifications
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 0 }
jnxBgpM2Established NOTIFICATION-TYPE
OBJECTS {
jnxBgpM2PeerLocalAddrType,
jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerRemoteAddrType,
jnxBgpM2PeerRemoteAddr,
jnxBgpM2PeerLastErrorReceived,
jnxBgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state."
::= { jnxBgpM2BaseNotifications 1 }
jnxBgpM2BackwardTransition NOTIFICATION-TYPE
OBJECTS {
jnxBgpM2PeerLocalAddrType,
jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerRemoteAddrType,
jnxBgpM2PeerRemoteAddr,
jnxBgpM2PeerLastErrorReceived,
jnxBgpM2PeerLastErrorReceivedText,
jnxBgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state."
::= { jnxBgpM2BaseNotifications 2 }
--
-- BGP Supported Version Table
--
jnxBgpM2Version
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 1 }
jnxBgpM2VersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP versions."
::= { jnxBgpM2Version 1 }
jnxBgpM2VersionEntry OBJECT-TYPE
SYNTAX JnxBgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a given supported version
of the Border Gateway Protocol and the level of
support provided. It is expected that any agent
implementation supporting this MIB module will
report support for Version 4 of the Border Gateway
Protocol at the very minimum."
INDEX {
jnxBgpM2VersionIndex
}
::= { jnxBgpM2VersionTable 1 }
JnxBgpM2VersionEntry ::= SEQUENCE {
jnxBgpM2VersionIndex
Unsigned32,
jnxBgpM2VersionSupported
TruthValue
}
jnxBgpM2VersionIndex OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the BGP Protocol."
::= { jnxBgpM2VersionEntry 1 }
jnxBgpM2VersionSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this version of the BGP protocol
identified in 'jnxBgpM2VersionIndex' is supported. The absence
of a row for a particular jnxBgpM2VersionIndex indicates that
that jnxBgpM2VersionIndex protocol version number is not
supported."
::= { jnxBgpM2VersionEntry 2 }
--
-- Supported authentication mechanisms
--
jnxBgpM2SupportedAuthentication
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 2 }
jnxBgpM2SupportedAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2SupportedAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The supported BGP authentication mechanisms."
::= { jnxBgpM2SupportedAuthentication 1 }
jnxBgpM2SupportedAuthEntry OBJECT-TYPE
SYNTAX JnxBgpM2SupportedAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information whether a given BGP
authentication mechanism is supported by this
implementation."
INDEX {
jnxBgpM2SupportedAuthCode
}
::= { jnxBgpM2SupportedAuthTable 1 }
JnxBgpM2SupportedAuthEntry ::= SEQUENCE {
jnxBgpM2SupportedAuthCode
Unsigned32,
jnxBgpM2SupportedAuthValue
TruthValue
}
jnxBgpM2SupportedAuthCode OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP authentication code."
::= { jnxBgpM2SupportedAuthEntry 1 }
jnxBgpM2SupportedAuthValue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if a given authentication method
is supported by the local implementation."
::= { jnxBgpM2SupportedAuthEntry 2 }
--
-- Supported BGP Capabilities
--
jnxBgpM2SupportedCapabilities
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 3 }
jnxBgpM2CapabilitySupportAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if capability support is
available and is enabled."
::= { jnxBgpM2SupportedCapabilities 1 }
jnxBgpM2SupportedCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2SupportedCapabilitiesEntry -- *** JNX ***
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP-4 capabilities."
::= { jnxBgpM2SupportedCapabilities 2 }
jnxBgpM2SupportedCapabilitiesEntry OBJECT-TYPE
SYNTAX JnxBgpM2SupportedCapabilitiesEntry -- *** JNX ***
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about supported capabilities indexed
by capability number."
INDEX {
jnxBgpM2SupportedCapabilityCode
}
::= { jnxBgpM2SupportedCapabilitiesTable 1 }
JnxBgpM2SupportedCapabilitiesEntry ::= SEQUENCE { -- *** JNX ***
jnxBgpM2SupportedCapabilityCode
Unsigned32,
jnxBgpM2SupportedCapability
TruthValue
}
jnxBgpM2SupportedCapabilityCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of supported capability. The index directly
corresponds with the BGP-4 Capability Advertisement
Capability Code."
::= { jnxBgpM2SupportedCapabilitiesEntry 1 }
jnxBgpM2SupportedCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is True if this capability is supported,
False otherwise."
::= { jnxBgpM2SupportedCapabilitiesEntry 2 }
--
-- Base Scalars
--
jnxBgpM2AsSize OBJECT-TYPE
SYNTAX INTEGER {
twoOctet(1),
fourOctet(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the AS value in this implementation.
The semantics of this are determined as per the
as-4bytes draft."
REFERENCE
"draft-ietf-idr-as4bytes-04"
::= { jnxBgpM2BaseScalars 4 }
jnxBgpM2LocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local autonomous system number.
If the jnxBgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { jnxBgpM2BaseScalars 5 }
jnxBgpM2LocalIdentifier OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { jnxBgpM2BaseScalars 6 }
--
-- Base Scalar Extensions
--
jnxBgpM2BaseScalarExtensions
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 7 }
jnxBgpM2BaseScalarNonCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 1 }
jnxBgpM2BaseScalarCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
jnxBgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::=
{ jnxBgpM2BaseScalarNonCapExts 2796 }
jnxBgpM2RouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP Route Reflection Extension and is enabled as a
route reflector. If the BGP Route Reflection extension
is not supported this value must be FALSE."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2BaseScalarRouteReflectExts 1 }
jnxBgpM2ClusterId OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's JnxBgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2BaseScalarRouteReflectExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
jnxBgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::=
{ jnxBgpM2BaseScalarNonCapExts 3065 }
jnxBgpM2ConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP AS Confederations Extension and this router is
configured to be in a confederation."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { jnxBgpM2BaseScalarASConfedExts 1 }
jnxBgpM2ConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { jnxBgpM2BaseScalarASConfedExts 2 }
--
-- Base Configuration Objects
--
jnxBgpM2BaseScalarConfiguration
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 8 }
jnxBgpM2CfgBaseScalarStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the intended storage type for
all configurable base scalars."
::= { jnxBgpM2BaseScalarConfiguration 1 }
jnxBgpM2CfgLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local autonomous system number.
If the jnxBgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { jnxBgpM2BaseScalarConfiguration 2 }
jnxBgpM2CfgLocalIdentifier OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { jnxBgpM2BaseScalarConfiguration 3 }
--
-- Base Scalar Extensions
--
jnxBgpM2CfgBaseScalarExtensions
OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarConfiguration 4 }
jnxBgpM2CfgBaseScalarNonCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 1 }
jnxBgpM2CfgBaseScalarCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
jnxBgpM2CfgBaseScalarReflectorExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 2796 }
jnxBgpM2CfgRouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will
be supporting route reflection."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2CfgBaseScalarReflectorExts 1 }
jnxBgpM2CfgClusterId OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's JnxBgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2CfgBaseScalarReflectorExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
jnxBgpM2CfgBaseScalarASConfedExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 3065 }
jnxBgpM2CfgConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will be
supporting BGP AS Confederations."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { jnxBgpM2CfgBaseScalarASConfedExts 1 }
jnxBgpM2CfgConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { jnxBgpM2CfgBaseScalarASConfedExts 2 }
--
-- BGP Peer Data
--
jnxBgpM2Peer
OBJECT IDENTIFIER ::= { jnxBgpM2 2 }
jnxBgpM2PeerData
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 1 }
jnxBgpM2PeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table.
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers."
::= { jnxBgpM2PeerData 1 }
jnxBgpM2PeerEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with
a remote BGP peer."
INDEX {
jnxBgpM2PeerRoutingInstance,
jnxBgpM2PeerLocalAddrType,
jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerRemoteAddrType,
jnxBgpM2PeerRemoteAddr
}
::= { jnxBgpM2PeerTable 1 }
JnxBgpM2PeerEntry ::= SEQUENCE {
jnxBgpM2PeerIdentifier
JnxBgpM2Identifier,
jnxBgpM2PeerState
INTEGER,
jnxBgpM2PeerStatus
INTEGER,
jnxBgpM2PeerConfiguredVersion
Unsigned32,
jnxBgpM2PeerNegotiatedVersion
Unsigned32,
jnxBgpM2PeerLocalAddrType
InetAddressType,
jnxBgpM2PeerLocalAddr
InetAddress,
jnxBgpM2PeerLocalPort
InetPortNumber,
jnxBgpM2PeerLocalAs
InetAutonomousSystemNumber,
jnxBgpM2PeerRemoteAddrType
InetAddressType,
jnxBgpM2PeerRemoteAddr
InetAddress,
jnxBgpM2PeerRemotePort
InetPortNumber,
jnxBgpM2PeerRemoteAs
InetAutonomousSystemNumber,
jnxBgpM2PeerIndex
Unsigned32, -- *** JNX ***
jnxBgpM2PeerRoutingInstance -- *** JNX ***
Unsigned32
}
jnxBgpM2PeerIdentifier OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is
in the OpenConfirm or the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { jnxBgpM2PeerEntry 1 }
jnxBgpM2PeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote BGP peer's FSM state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 8"
::= { jnxBgpM2PeerEntry 2 }
jnxBgpM2PeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the BGP FSM for this remote peer is halted
or running. The BGP FSM for a remote peer is halted after
processing a Stop event. Likewise, it is in the running
state after a Start event.
The jnxBgpM2PeerState will generally be in the idle state when
the FSM is halted, although some extensions such as
Graceful Restart will leave the peer in the Idle state
but with the FSM running."
::= { jnxBgpM2PeerEntry 3 }
jnxBgpM2PeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol."
::= { jnxBgpM2PeerEntry 4 }
jnxBgpM2PeerNegotiatedVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated version of BGP running between the two
peers."
::= { jnxBgpM2PeerEntry 5 }
jnxBgpM2PeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the local end of the peering
session."
::= { jnxBgpM2PeerEntry 6 }
jnxBgpM2PeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { jnxBgpM2PeerEntry 7 }
jnxBgpM2PeerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the BGP
peers."
::= { jnxBgpM2PeerEntry 8 }
jnxBgpM2PeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Some implementations of BGP can represent themselves
as multiple ASs. This is the AS that this peering
session is representing itself as to the remote peer."
::= { jnxBgpM2PeerEntry 9 }
jnxBgpM2PeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the remote end of the peering
session."
::= { jnxBgpM2PeerEntry 10 }
jnxBgpM2PeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote end of the peering session."
::= { jnxBgpM2PeerEntry 11 }
jnxBgpM2PeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the BGP
peers. In the case of a transport for which the notion
of 'port' is irrelevant, an instance value of -1
should be returned by the agent for this object.
Note that the objects jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and
jnxBgpM2PeerRemotePort provide the appropriate reference to
the standard MIB TCP connection table. or even the ipv6
TCP MIB as in rfc2452."
REFERENCE
"RFC 2012 - SNMPv2 Management Information Base for the
Transmission Control Protocol using SMIv2.
RFC 2542 - IP Version 6 Management Information Base
for the Transmission Control Protocol."
::= { jnxBgpM2PeerEntry 12 }
jnxBgpM2PeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { jnxBgpM2PeerEntry 13 }
jnxBgpM2PeerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the remote peer entry
in the jnxBgpM2PeerTable. It is assigned by the agent
at the point of creation of the jnxBgpM2PeerTable row
entry. While its value is guaranteed to be unique at
any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2PeerIndex row instance values across rows of
the jnxBgpM2PeerTable. It is used to provide an index
structure for other tables whose data is logically
per-peer.
For explicitly configured peers, this value will remain
consistent until this row is deleted by deleting the
configured peers. Unconfigured peers will generate
a monotonically increasing number when a BGP FSM is
built to process the peering session. Values in the
jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex
are expected to remain in existence for an arbitrary
time after the unconfigured peer has been deleted
in order to allow management applications to extract
useful management information for those peers. Thus,
an unconfigured peer using the same indices as the
jnxBgpM2PeerTable that comes up while this row still
exists will re-utilize the same row."
::= { jnxBgpM2PeerEntry 14 }
jnxBgpM2PeerRoutingInstance OBJECT-TYPE -- *** JNX ***
SYNTAX Unsigned32 -- *** JNX ***
MAX-ACCESS read-only -- *** JNX ***
STATUS current -- *** JNX ***
DESCRIPTION -- *** JNX ***
"Routing instance index." -- *** JNX ***
::= { jnxBgpM2PeerEntry 15 } -- *** JNX ***
--
-- Errors
--
jnxBgpM2PeerErrors
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 2 }
jnxBgpM2PeerErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer,
by its jnxBgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the session."
::= { jnxBgpM2PeerErrors 1 }
jnxBgpM2PeerErrorsEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about errors sent
and received for a particular BGP peer."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerErrorsTable 1 }
JnxBgpM2PeerErrorsEntry ::= SEQUENCE {
jnxBgpM2PeerLastErrorReceived
OCTET STRING,
jnxBgpM2PeerLastErrorSent
OCTET STRING,
jnxBgpM2PeerLastErrorReceivedTime
TimeTicks,
jnxBgpM2PeerLastErrorSentTime
TimeTicks,
jnxBgpM2PeerLastErrorReceivedText
SnmpAdminString,
jnxBgpM2PeerLastErrorSentText
SnmpAdminString,
jnxBgpM2PeerLastErrorReceivedData
OCTET STRING,
jnxBgpM2PeerLastErrorSentData
OCTET STRING
}
jnxBgpM2PeerLastErrorReceived OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode received by this BGP
Speaker via a NOTIFICATION message for this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 1 }
jnxBgpM2PeerLastErrorSent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode sent by this BGP
Speaker via a NOTIFICATION message to this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 2 }
jnxBgpM2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was received from
this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 3 }
jnxBgpM2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was sent to
this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 4 }
jnxBgpM2PeerLastErrorReceivedText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that was reported."
::= { jnxBgpM2PeerErrorsEntry 5 }
jnxBgpM2PeerLastErrorSentText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that is being reported."
::= { jnxBgpM2PeerErrorsEntry 6 }
jnxBgpM2PeerLastErrorReceivedData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data seen by this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 7 }
jnxBgpM2PeerLastErrorSentData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data sent to this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { jnxBgpM2PeerErrorsEntry 8 }
--
-- Peer Authentication
--
jnxBgpM2PeerAuthentication
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 3 }
jnxBgpM2PeerAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer authentication table.
This table contains, one entry per BGP peer,
information about the authentication with BGP peers."
::= { jnxBgpM2PeerAuthentication 1 }
jnxBgpM2PeerAuthEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the authentication
with a BGP peer."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerAuthTable 1 }
JnxBgpM2PeerAuthEntry ::= SEQUENCE {
jnxBgpM2PeerAuthSent
TruthValue,
jnxBgpM2PeerAuthSentCode
Unsigned32,
jnxBgpM2PeerAuthSentValue
OCTET STRING,
jnxBgpM2PeerAuthRcvd
TruthValue,
jnxBgpM2PeerAuthRcvdCode
Unsigned32,
jnxBgpM2PeerAuthRcvdValue
OCTET STRING
}
jnxBgpM2PeerAuthSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local peer has sent authentication information
to the remote peer in the BGP Authentication field."
::= { jnxBgpM2PeerAuthEntry 1 }
jnxBgpM2PeerAuthSentCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The code of the authentication information sent to
the remote peer."
::= { jnxBgpM2PeerAuthEntry 2 }
jnxBgpM2PeerAuthSentValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..252))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The payload of the authentication information
from the remote peer."
::= { jnxBgpM2PeerAuthEntry 3 }
jnxBgpM2PeerAuthRcvd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local peer has received authentication information
from the remote peer in the BGP Authentication field."
::= { jnxBgpM2PeerAuthEntry 4 }
jnxBgpM2PeerAuthRcvdCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The code of the authentication information received from
the remote peer."
::= { jnxBgpM2PeerAuthEntry 5 }
jnxBgpM2PeerAuthRcvdValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..252))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The payload of the authentication information from
the remote peer."
::= { jnxBgpM2PeerAuthEntry 6 }
--
-- Peer Event Times
--
jnxBgpM2PeerTimers
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 4 }
jnxBgpM2PeerEventTimesTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state."
::= { jnxBgpM2PeerTimers 1 }
jnxBgpM2PeerEventTimesEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of statistics about time
spent and events encountered in the peer session
Established state."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerEventTimesTable 1 }
JnxBgpM2PeerEventTimesEntry ::= SEQUENCE {
jnxBgpM2PeerFsmEstablishedTime
Gauge32,
jnxBgpM2PeerInUpdatesElapsedTime
Gauge32
}
jnxBgpM2PeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this
peer has been in the Established state or how long
since this peer was last in the Established state.
It is set to zero when a new peer is configured or
the router is booted."
::= { jnxBgpM2PeerEventTimesEntry 1 }
jnxBgpM2PeerInUpdatesElapsedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last BGP UPDATE
message was received from the peer. Each time
jnxBgpM2PeerInUpdates is incremented, the value of this
object is set to zero (0). This value shall also be
zero (0) when the peer is not in the Established state"
::= { jnxBgpM2PeerEventTimesEntry 2 }
--
-- Peer Configured Timers
--
jnxBgpM2PeerConfiguredTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per peer management data on BGP session timers."
::= { jnxBgpM2PeerTimers 2 }
jnxBgpM2PeerConfiguredTimersEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to the current state of
BGP timers on a given peering session."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerConfiguredTimersTable 1 }
JnxBgpM2PeerConfiguredTimersEntry ::= SEQUENCE {
jnxBgpM2PeerConnectRetryInterval
Unsigned32,
jnxBgpM2PeerHoldTimeConfigured
Unsigned32,
jnxBgpM2PeerKeepAliveConfigured
Unsigned32,
jnxBgpM2PeerMinASOrigInterval
Unsigned32,
jnxBgpM2PeerMinRouteAdverInterval
Unsigned32
}
jnxBgpM2PeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
::= { jnxBgpM2PeerConfiguredTimersEntry 1 }
jnxBgpM2PeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (jnxBgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { jnxBgpM2PeerConfiguredTimersEntry 2 }
jnxBgpM2PeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in jnxBgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by jnxBgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of jnxBgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { jnxBgpM2PeerConfiguredTimersEntry 3 }
jnxBgpM2PeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
::= { jnxBgpM2PeerConfiguredTimersEntry 4 }
jnxBgpM2PeerMinRouteAdverInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
::= { jnxBgpM2PeerConfiguredTimersEntry 5 }
--
-- Peer Negotiated Timers
--
jnxBgpM2PeerNegotiatedTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current values of per-peer timers which can be
dynamically set in the jnxBgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
jnxBgpM2PeerConfiguredTimersTable row instances."
::= { jnxBgpM2PeerTimers 3 }
jnxBgpM2PeerNegotiatedTimersEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry reflects a value of the currently
operational, negotiated timers as reflected in the
JnxBgpM2PeerNegotiatedTimersEntry."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerNegotiatedTimersTable 1 }
JnxBgpM2PeerNegotiatedTimersEntry ::= SEQUENCE {
jnxBgpM2PeerHoldTime
Unsigned32,
jnxBgpM2PeerKeepAlive
Unsigned32
}
jnxBgpM2PeerHoldTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
jnxBgpM2PeerHoldTimeConfigured for this peer.
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { jnxBgpM2PeerNegotiatedTimersEntry 1 }
jnxBgpM2PeerKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with jnxBgpM2PeerHoldTime, it has the same
proportion as what jnxBgpM2PeerKeepAliveConfigured has
when compared with jnxBgpM2PeerHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
jnxBgpM2PeerKeepAliveConfigured is zero (0).
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17, Sec. 4.4"
::= { jnxBgpM2PeerNegotiatedTimersEntry 2 }
--
-- Peer Capabilities
--
jnxBgpM2PeerCapabilities
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 5 }
--
-- Announced Capabilities
--
jnxBgpM2PeerCapsAnnouncedTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { jnxBgpM2PeerCapabilities 1 }
jnxBgpM2PeerCapsAnnouncedEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
jnxBgpM2PeerIndex,
jnxBgpM2PeerCapAnnouncedCode,
jnxBgpM2PeerCapAnnouncedIndex
}
::= { jnxBgpM2PeerCapsAnnouncedTable 1 }
JnxBgpM2PeerCapsAnnouncedEntry ::= SEQUENCE {
jnxBgpM2PeerCapAnnouncedCode
Unsigned32,
jnxBgpM2PeerCapAnnouncedIndex
Unsigned32,
jnxBgpM2PeerCapAnnouncedValue
OCTET STRING
}
jnxBgpM2PeerCapAnnouncedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { jnxBgpM2PeerCapsAnnouncedEntry 1 }
jnxBgpM2PeerCapAnnouncedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { jnxBgpM2PeerCapsAnnouncedEntry 2 }
jnxBgpM2PeerCapAnnouncedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { jnxBgpM2PeerCapsAnnouncedEntry 3 }
--
-- Received Capabilities
--
jnxBgpM2PeerCapsReceivedTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerCapsReceivedEntry -- *** JNX ***
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { jnxBgpM2PeerCapabilities 2 }
jnxBgpM2PeerCapsReceivedEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerCapsReceivedEntry -- *** JNX ***
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
jnxBgpM2PeerIndex,
jnxBgpM2PeerCapReceivedCode,
jnxBgpM2PeerCapReceivedIndex
}
::= { jnxBgpM2PeerCapsReceivedTable 1 }
JnxBgpM2PeerCapsReceivedEntry ::= SEQUENCE { -- *** JNX ***
jnxBgpM2PeerCapReceivedCode
Unsigned32,
jnxBgpM2PeerCapReceivedIndex
Unsigned32,
jnxBgpM2PeerCapReceivedValue
OCTET STRING
}
jnxBgpM2PeerCapReceivedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { jnxBgpM2PeerCapsReceivedEntry 1 }
jnxBgpM2PeerCapReceivedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { jnxBgpM2PeerCapsReceivedEntry 2 }
jnxBgpM2PeerCapReceivedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { jnxBgpM2PeerCapsReceivedEntry 3 }
--
-- Per-peer counters
--
jnxBgpM2PeerCounters
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 6 }
jnxBgpM2PeerCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The counters associated with a BGP Peer."
::= { jnxBgpM2PeerCounters 1 }
jnxBgpM2PeerCountersEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session."
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerCountersTable 1 }
JnxBgpM2PeerCountersEntry ::= SEQUENCE {
jnxBgpM2PeerInUpdates
Counter32,
jnxBgpM2PeerOutUpdates
Counter32,
jnxBgpM2PeerInTotalMessages
Counter32,
jnxBgpM2PeerOutTotalMessages
Counter32,
jnxBgpM2PeerFsmEstablishedTrans
Counter32
}
-- +++wayne need to describe what happens if connection is broken
-- and then reestablished. Does the prior counter value accumulate?
jnxBgpM2PeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages received on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { jnxBgpM2PeerCountersEntry 1 }
jnxBgpM2PeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages transmitted on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { jnxBgpM2PeerCountersEntry 2 }
jnxBgpM2PeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received from the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { jnxBgpM2PeerCountersEntry 3 }
jnxBgpM2PeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { jnxBgpM2PeerCountersEntry 4 }
jnxBgpM2PeerFsmEstablishedTrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM
transitioned into the established state
for this peer."
::= { jnxBgpM2PeerCountersEntry 5 }
--
-- Per-Peer Prefix Counters
--
jnxBgpM2PrefixCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional per-peer, per AFI SAFI counters for prefixes"
::= { jnxBgpM2PeerCounters 2 }
jnxBgpM2PrefixCountersEntry OBJECT-TYPE
SYNTAX JnxBgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a bgp-peers prefix
counters."
INDEX {
jnxBgpM2PeerIndex,
jnxBgpM2PrefixCountersAfi,
jnxBgpM2PrefixCountersSafi
}
::= { jnxBgpM2PrefixCountersTable 1 }
JnxBgpM2PrefixCountersEntry ::= SEQUENCE {
jnxBgpM2PrefixCountersAfi
InetAddressType,
jnxBgpM2PrefixCountersSafi
JnxBgpM2Safi,
jnxBgpM2PrefixInPrefixes
Gauge32,
jnxBgpM2PrefixInPrefixesAccepted
Gauge32,
jnxBgpM2PrefixInPrefixesRejected
Gauge32,
jnxBgpM2PrefixOutPrefixes
Gauge32,
jnxBgpM2PrefixInPrefixesActive
Gauge32
}
jnxBgpM2PrefixCountersAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AFI index of the per-peer, per prefix counters"
::= { jnxBgpM2PrefixCountersEntry 1 }
jnxBgpM2PrefixCountersSafi OBJECT-TYPE
SYNTAX JnxBgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SAFI index of the per-peer, per prefix counters"
::= { jnxBgpM2PrefixCountersEntry 2 }
jnxBgpM2PrefixInPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer."
-- jmh - note that we are allowing stuff to be discarded
::= { jnxBgpM2PrefixCountersEntry 7 }
jnxBgpM2PrefixInPrefixesAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib."
::= { jnxBgpM2PrefixCountersEntry 8 }
jnxBgpM2PrefixInPrefixesRejected OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib."
::= { jnxBgpM2PrefixCountersEntry 9 }
jnxBgpM2PrefixOutPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in that peers Adj-Ribs-Out."
::= { jnxBgpM2PrefixCountersEntry 10 }
jnxBgpM2PrefixInPrefixesActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are the active route
in the Loc-Rib."
::= { jnxBgpM2PrefixCountersEntry 11 }
jnxBgpM2PeerExtensions
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 7 }
jnxBgpM2PeerNonCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 1 }
jnxBgpM2PeerCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 2 }
--
-- Peer Route Reflection Extensions
--
jnxBgpM2PeerRouteReflectionExts
OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 2796 }
jnxBgpM2PeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2PeerRouteReflectionExts 1 }
jnxBgpM2PeerReflectorClientEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerReflectorClientTable 1 }
JnxBgpM2PeerReflectorClientEntry ::= SEQUENCE {
jnxBgpM2PeerReflectorClient
INTEGER
}
jnxBgpM2PeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2PeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
jnxBgpM2PeerASConfederationExts
OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 3065 }
jnxBgpM2PeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { jnxBgpM2PeerASConfederationExts 1 }
jnxBgpM2PeerConfedMemberEntry OBJECT-TYPE
SYNTAX JnxBgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
jnxBgpM2PeerEntry
}
::= { jnxBgpM2PeerConfedMemberTable 1 }
JnxBgpM2PeerConfedMemberEntry ::= SEQUENCE {
jnxBgpM2PeerConfedMember
TruthValue
}
jnxBgpM2PeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { jnxBgpM2PeerConfedMemberEntry 1 }
--
-- Peer configuration objects
--
jnxBgpM2PeerConfiguration
OBJECT IDENTIFIER ::= { jnxBgpM2Peer 8 }
--
-- Administering activated peering sessions
--
jnxBgpM2CfgPeerAdminStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing rows for administratively starting and
stopping peering sessions."
::= { jnxBgpM2PeerConfiguration 1 }
jnxBgpM2CfgPeerAdminStatusEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing row for administratively starting and
stopping peers."
INDEX {
jnxBgpM2PeerIndex
}
::= { jnxBgpM2CfgPeerAdminStatusTable 1 }
JnxBgpM2CfgPeerAdminStatusEntry ::= SEQUENCE {
jnxBgpM2CfgPeerAdminStatus
INTEGER
}
jnxBgpM2CfgPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the Manual Stop and Manual Start
events to be sent to an activated peering session."
::= { jnxBgpM2CfgPeerAdminStatusEntry 1 }
--
-- Peer Configuration
--
jnxBgpM2CfgPeerNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
use as an index for creation of a row instance in
in the jnxBgpM2CfgPeerTable. If the number of available
entries in the jnxBgpM2CfgPeerTable is exhausted, a
retrieval value of this object instance will return
0. A value of 0 may also be returned if the agent
is otherwise incapable of jnxBgpM2CfgPeerTable row creation
at the time of jnxBgpM2CfgPeerNextIndex retrieval."
::= { jnxBgpM2PeerConfiguration 2 }
jnxBgpM2CfgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP configuration peer table.
This table allows the configuration of the parameters
for a session with a BGP peer.
+++wayne provide description of how config should be done
for a peer per table."
::= { jnxBgpM2PeerConfiguration 3 }
jnxBgpM2CfgPeerEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information set up by a management
entity to configure a connection with a BGP peer."
INDEX { jnxBgpM2CfgPeerIndex }
::= { jnxBgpM2CfgPeerTable 1 }
JnxBgpM2CfgPeerEntry ::= SEQUENCE {
jnxBgpM2CfgPeerConfiguredVersion
Unsigned32,
jnxBgpM2CfgAllowVersionNegotiation
TruthValue,
jnxBgpM2CfgPeerLocalAddrType
InetAddressType,
jnxBgpM2CfgPeerLocalAddr
InetAddress,
jnxBgpM2CfgPeerLocalAs
InetAutonomousSystemNumber,
jnxBgpM2CfgPeerRemoteAddrType
InetAddressType,
jnxBgpM2CfgPeerRemoteAddr
InetAddress,
jnxBgpM2CfgPeerRemotePort
Integer32,
jnxBgpM2CfgPeerRemoteAs
InetAutonomousSystemNumber,
jnxBgpM2CfgPeerEntryStorageType
StorageType,
jnxBgpM2CfgPeerError
INTEGER,
jnxBgpM2CfgPeerBgpPeerEntry
RowPointer,
jnxBgpM2CfgPeerRowEntryStatus
RowStatus,
jnxBgpM2CfgPeerIndex
Integer32,
jnxBgpM2CfgPeerStatus
INTEGER,
jnxBgpM2CfgPeerRoutingInstance -- *** JNX ***
Unsigned32 -- *** JNX ***
}
jnxBgpM2CfgPeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured version to originally start with
this peer. The BGP speaker may permit negotiation
to a lower version number of the protocol depending on the
set value of jnxBgpM2CfgAllowVersionNegotiation."
DEFVAL { 4 }
::= { jnxBgpM2CfgPeerEntry 1 }
jnxBgpM2CfgAllowVersionNegotiation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, during session establishment with this
peer, negotiation to a version lower than that specified
in jnxBgpM2CfgPeerConfiguredVersion will be allowed."
DEFVAL { false }
::= { jnxBgpM2CfgPeerEntry 2 }
jnxBgpM2CfgPeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of this BGP
session."
::= { jnxBgpM2CfgPeerEntry 3 }
jnxBgpM2CfgPeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { jnxBgpM2CfgPeerEntry 4 }
jnxBgpM2CfgPeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system represented to peer on peering
session initialization. Some implementations of
BGP can represent themselves as multiple ASes.
These implementations can set this to an alternate
autonomous system. If this object is set to zero
(0) at the point this row instance is set to active,
then the implementation will initialize this session
representing itself as the value of jnxBgpM2CfgLocalAs."
DEFVAL { 0 }
::= { jnxBgpM2CfgPeerEntry 5 }
jnxBgpM2CfgPeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of the remote BGP
session."
::= { jnxBgpM2CfgPeerEntry 6 }
jnxBgpM2CfgPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote end (destination address
of peer) for peering session."
::= { jnxBgpM2CfgPeerEntry 7 }
jnxBgpM2CfgPeerRemotePort OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the remote port for the transport connection
between the BGP peers. In the case of a transport for
which the notion of port is irrelevant, the value of
-1 can be defaulted or set."
DEFVAL { -1 }
::= { jnxBgpM2CfgPeerEntry 8 }
jnxBgpM2CfgPeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system number of the remote peer."
::= { jnxBgpM2CfgPeerEntry 9 }
jnxBgpM2CfgPeerEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type specifies the intended storage
type for the jnxBgpM2CfgPeerEntry row instance."
::= { jnxBgpM2CfgPeerEntry 10 }
jnxBgpM2CfgPeerError OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
notActivated (1),
errDuplicatePeeringSession (2),
activated (3)
-- +++wayne more to follow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the current error status of
the row denoting the configured error status.
If this row is still under creation (has not been activated
jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to
not-activated (1).
At the point that the row is activated, jnxBgpM2CfgPeerError
will reflect the error status of the row data itself. If
there is another session already activated with the same
local and remote addresses as denoted by
{jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr,
jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then
the value of this will be set to
err-duplicate-peering-session (2).
If this row is associated with a peer session whose
initialization has been attempted, the value will be
set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will
be set to the row instance of the entry in the
jnxBgpM2PeerTable which reflects the state of the peering
session).
Note that this object only reflects the error as a
function of the attempted activation of this row as
containing data for a bgp peering session. The actual
state of the session at the point of any protocol exchange
or session state machine initiation is reflected in the
jnxBgpM2PeerTable row instance (as reflected through
jnxBgpM2CfgPeerPeerEntry) associated with this row instance."
::= { jnxBgpM2CfgPeerEntry 11 }
jnxBgpM2CfgPeerBgpPeerEntry OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upon activation of the session data contained in this
row instance, this object points to an instance of a row
within the jnxBgpM2PeerTable reflecting the session in its
initializing or operational state. Retrieval of this
column instance will always yield a value of {0.0} unless
the session has successfully been activated (via
jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always
have a value of jnxBgpM2CfgPeerError which is activated (3)."
::= { jnxBgpM2CfgPeerEntry 12 }
jnxBgpM2CfgPeerRowEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type is used to control creation,
activation, and deletion of this row instance."
-- +++wayne need better directions for agent auto-removal
-- of row instances which have moved to active or error
-- state
::= { jnxBgpM2CfgPeerEntry 13 }
jnxBgpM2CfgPeerIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible -- *** JNX ***
STATUS current
DESCRIPTION
"Uniquely identifies an instance of a peer row, as
an element of configuration."
::= { jnxBgpM2CfgPeerEntry 14 }
jnxBgpM2CfgPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the state of the peering session upon
activation. If disabled, the FSM is in the halted
state and no Automatic Start events are generated.
If enabled, the FSM is in the running state and
Automatic Start events may be generated."
::= { jnxBgpM2CfgPeerEntry 15 }
jnxBgpM2CfgPeerRoutingInstance OBJECT-TYPE -- *** JNX ***
SYNTAX Unsigned32 -- *** JNX ***
MAX-ACCESS read-create -- *** JNX ***
STATUS current -- *** JNX ***
DESCRIPTION -- *** JNX ***
"Routing instance index." -- *** JNX ***
::= { jnxBgpM2CfgPeerEntry 16 } -- *** JNX ***
--
-- Per-peer authentication table.
--
jnxBgpM2CfgPeerAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table contain per peer configuration for BGP Authentication."
::= { jnxBgpM2PeerConfiguration 4 }
jnxBgpM2CfgPeerAuthEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a peer's BGP Authentication
configuration."
AUGMENTS {
jnxBgpM2CfgPeerEntry
}
::= { jnxBgpM2CfgPeerAuthTable 1 }
JnxBgpM2CfgPeerAuthEntry ::= SEQUENCE {
jnxBgpM2CfgPeerAuthEnabled
TruthValue,
jnxBgpM2CfgPeerAuthCode
Unsigned32,
jnxBgpM2CfgPeerAuthValue
OCTET STRING
}
jnxBgpM2CfgPeerAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value is true if BGP Authentication is enabled for
this peer. This is the authentication mechanism
documented in the base BGP specification, not the MD5
session protection mechanism."
DEFVAL {
false
}
::= { jnxBgpM2CfgPeerAuthEntry 1 }
jnxBgpM2CfgPeerAuthCode OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication code for the BGP Authentication
mechanism."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a"
::= { jnxBgpM2CfgPeerAuthEntry 2 }
jnxBgpM2CfgPeerAuthValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..252))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication payload for the BGP authentication
mechanism. This value has semantic meaning within
the context of the authentication code."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a"
::= { jnxBgpM2CfgPeerAuthEntry 3 }
--
-- Per-peer timers table
--
jnxBgpM2CfgPeerTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of per-peer timers."
::= { jnxBgpM2PeerConfiguration 5 }
jnxBgpM2CfgPeerTimersEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing per-peer timer configuration."
AUGMENTS {
jnxBgpM2CfgPeerEntry
}
::= { jnxBgpM2CfgPeerTimersTable 1 }
JnxBgpM2CfgPeerTimersEntry ::= SEQUENCE {
jnxBgpM2CfgPeerConnectRetryInterval
Unsigned32,
jnxBgpM2CfgPeerHoldTimeConfigured
Unsigned32,
jnxBgpM2CfgPeerKeepAliveConfigured
Unsigned32,
jnxBgpM2CfgPeerMinASOrigInterval
Unsigned32,
jnxBgpM2CfgPeerMinRouteAdverInter
Unsigned32
}
jnxBgpM2CfgPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
DEFVAL {
120
}
::= { jnxBgpM2CfgPeerTimersEntry 1 }
jnxBgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (jnxBgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
90
}
::= { jnxBgpM2CfgPeerTimersEntry 2 }
jnxBgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in jnxBgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by jnxBgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of jnxBgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
30
}
::= { jnxBgpM2CfgPeerTimersEntry 3 }
jnxBgpM2CfgPeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
DEFVAL {
15
}
::= { jnxBgpM2CfgPeerTimersEntry 4 }
jnxBgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
DEFVAL {
30
}
::= { jnxBgpM2CfgPeerTimersEntry 5 }
--
-- Per-peer configuration extensions
--
jnxBgpM2CfgPeerExtensions
OBJECT IDENTIFIER ::= { jnxBgpM2PeerConfiguration 6 }
jnxBgpM2CfgPeerNonCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 1 }
jnxBgpM2CfgPeerCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 2 }
--
-- Peer route reflection configuration
--
jnxBgpM2CfgPeerRouteReflectionExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 2796 }
jnxBgpM2CfgPeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2CfgPeerRouteReflectionExts 1 }
jnxBgpM2CfgPeerReflectorClientEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
jnxBgpM2CfgPeerEntry
}
::= { jnxBgpM2CfgPeerReflectorClientTable 1 }
JnxBgpM2CfgPeerReflectorClientEntry ::= SEQUENCE {
jnxBgpM2CfgPeerReflectorClient
INTEGER
}
jnxBgpM2CfgPeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2CfgPeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
jnxBgpM2CfgPeerASConfederationExts
OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 3065 }
jnxBgpM2CfgPeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { jnxBgpM2CfgPeerASConfederationExts 1 }
jnxBgpM2CfgPeerConfedMemberEntry OBJECT-TYPE
SYNTAX JnxBgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
jnxBgpM2CfgPeerEntry -- *** JNX ***
}
::= { jnxBgpM2CfgPeerConfedMemberTable 1 }
JnxBgpM2CfgPeerConfedMemberEntry ::= SEQUENCE {
jnxBgpM2CfgPeerConfedMember
TruthValue
}
jnxBgpM2CfgPeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { jnxBgpM2CfgPeerConfedMemberEntry 1 }
--
-- BGP NLRI Data
--
jnxBgpM2Rib
OBJECT IDENTIFIER ::= { jnxBgpM2 3 }
--
-- NLRI Table
--
jnxBgpM2NlriTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
jnxBgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In."
::= { jnxBgpM2Rib 1 }
jnxBgpM2NlriEntry OBJECT-TYPE
SYNTAX JnxBgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX {
jnxBgpM2PeerIndex,
jnxBgpM2NlriAfi,
jnxBgpM2NlriSafi,
jnxBgpM2NlriPrefix,
jnxBgpM2NlriPrefixLen,
jnxBgpM2NlriIndex
}
::= { jnxBgpM2NlriTable 1 }
JnxBgpM2NlriEntry ::= SEQUENCE {
jnxBgpM2NlriIndex
Unsigned32,
jnxBgpM2NlriAfi
InetAddressType,
jnxBgpM2NlriSafi
JnxBgpM2Safi,
jnxBgpM2NlriPrefix
InetAddress,
jnxBgpM2NlriPrefixLen
InetAddressPrefixLength,
jnxBgpM2NlriBest
TruthValue,
jnxBgpM2NlriCalcLocalPref
Unsigned32,
jnxBgpM2PathAttrIndex
Unsigned32,
jnxBgpM2NlriOpaqueType
INTEGER,
jnxBgpM2NlriOpaquePointer
RowPointer
}
jnxBgpM2NlriIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index allows for multiple instances of a base
prefix for a certain AFI SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4"
::= { jnxBgpM2NlriEntry 1 }
jnxBgpM2NlriAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the prefix for this NLRI."
::= { jnxBgpM2NlriEntry 2 }
jnxBgpM2NlriSafi OBJECT-TYPE
SYNTAX JnxBgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subsequent address family of the prefix for
this NLRI"
REFERENCE
"RFC 2858 - Multiprotocol Extensions for BGP-4"
::= { jnxBgpM2NlriEntry 3 }
jnxBgpM2NlriPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
jnxBgpM2PathAttrAddrPrefixLen.
Any bits beyond the length specified by
jnxBgpM2PathAttrAddrPrefixLen are zeroed."
::= { jnxBgpM2NlriEntry 4 }
jnxBgpM2NlriPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length in bits of the address prefix in
the Network Layer Reachability Information field."
::= { jnxBgpM2NlriEntry 5 }
jnxBgpM2NlriBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { jnxBgpM2NlriEntry 6 }
jnxBgpM2NlriCalcLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route."
::= { jnxBgpM2NlriEntry 7 }
jnxBgpM2PathAttrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the per-NLRI entry
in the jnxBgpM2PeerAttrTable. It is assigned by the
agent at the point of creation of the jnxBgpM2PeerAttrTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2PeerAttrIndex row instance values across rows
of the jnxBgpM2PeerAttrTable. It is used to provide an
index structure for other tables whose data is logically
per-peer, per-NLRI."
::= { jnxBgpM2NlriEntry 8 }
jnxBgpM2NlriOpaqueType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
bgpMplsLabelStack(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object enumerates the type of the row that is
pointed to in the table row jnxBgpM2NlriOpaquePointer
instance, if jnxBgpM2NlriOpaquePointer is in fact not
a zero length. jnxBgpM2NlriOpaqueType is necessary since
the data referenced by jnxBgpM2NlriOpaquePointer is
opaque to BGP. For example, in the case of RFC 3107,
the label stack that is pointed to may occur in the
mplsLabelStackTable from the MPLS-LSR-MIB, and the
instance value of jnxBgpM2NlriOpaqueType would be
bgpMplsLabelStack(1)."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4
draft-ietf-mpls-lsr-mib-08.txt"
::= { jnxBgpM2NlriEntry 9 }
jnxBgpM2NlriOpaquePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a row that decomposes the data that is
opaque to the BGP MIB but is sent in the NLRI.
This RowPointer has zero (0) length data instance
if jnxBgpM2NlriOpaqueType is none."
::= { jnxBgpM2NlriEntry 10 }
--
-- Adj-Ribs-Out Table
--
jnxBgpM2AdjRibsOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains on a per-peer basis one or more
routes from the jnxBgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 3.2"
::= { jnxBgpM2Rib 2 }
jnxBgpM2AdjRibsOutEntry OBJECT-TYPE
SYNTAX JnxBgpM2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of BGP routes that have been placed into a
peer's Adj-Ribs-Out."
INDEX {
jnxBgpM2PeerIndex,
jnxBgpM2NlriAfi,
jnxBgpM2NlriSafi,
jnxBgpM2NlriPrefix,
jnxBgpM2NlriPrefixLen,
jnxBgpM2AdjRibsOutIndex
}
::= { jnxBgpM2AdjRibsOutTable 1 }
JnxBgpM2AdjRibsOutEntry ::= SEQUENCE {
jnxBgpM2AdjRibsOutIndex
Unsigned32,
jnxBgpM2AdjRibsOutRoute
RowPointer
}
jnxBgpM2AdjRibsOutIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Certain extensions to BGP permit multiple instance of
a per afi, per safi prefix to be advertised to a peer.
This object allows the enumeration of them."
::= { jnxBgpM2AdjRibsOutEntry 1 }
jnxBgpM2AdjRibsOutRoute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object points to the route in the jnxBgpM2NlriTable
that corresponds to the entry in the peer's
Adj-Rib-Out. Outgoing route maps are not
reflected at this point as those are part of the
Update-Send process."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.2"
::= { jnxBgpM2AdjRibsOutEntry 2 }
--
-- BGP Rib Path Attributes Table
--
--
-- Path Attribute Counter
--
jnxBgpM2PathAttrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the jnxBgpM2PathAttrTable."
::= { jnxBgpM2Rib 3 }
--
-- Path Attributes Table
--
jnxBgpM2PathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides per advertised network-prefix attribute data,
as advertised over a peering session."
::= { jnxBgpM2Rib 4 }
jnxBgpM2PathAttrEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data about a given network
prefix, per-prefix and per-advertising peer."
INDEX {
jnxBgpM2PathAttrIndex
}
::= { jnxBgpM2PathAttrTable 1 }
JnxBgpM2PathAttrEntry ::= SEQUENCE {
jnxBgpM2PathAttrOrigin
INTEGER,
jnxBgpM2PathAttrNextHopAddrType
InetAddressType,
jnxBgpM2PathAttrNextHop
InetAddress,
jnxBgpM2PathAttrMedPresent
TruthValue,
jnxBgpM2PathAttrMed
Unsigned32,
jnxBgpM2PathAttrLocalPrefPresent
TruthValue,
jnxBgpM2PathAttrLocalPref
Unsigned32,
jnxBgpM2PathAttrAtomicAggregate
INTEGER,
jnxBgpM2PathAttrAggregatorAS
InetAutonomousSystemNumber,
jnxBgpM2PathAttrAggregatorAddr
JnxBgpM2Identifier,
jnxBgpM2AsPathCalcLength
Unsigned32,
jnxBgpM2AsPathString
SnmpAdminString,
jnxBgpM2AsPathIndex
Unsigned32
}
jnxBgpM2PathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via the EGP protocol
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path information."
::= { jnxBgpM2PathAttrEntry 1 }
jnxBgpM2PathAttrNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the address for
the border router that should be used
to access the destination network."
::= { jnxBgpM2PathAttrEntry 2 }
jnxBgpM2PathAttrNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet.
The address family of this object will be the
same as that of the prefix in this row.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. jnxBgpM2LinkLocalNextHopTable will contain
the linklocal scope nexthop.
In the case that the mechanism documented in
draft-kato-bgp-ipv6-link-local-00.txt is used and
only a link local nexthop has been sent, ,
jnxBgpM2LinkLocalNextHopPresent will be false
and jnxBgpM2PathAttrNextHop will contain the link local
nexthop."
::= { jnxBgpM2PathAttrEntry 3 }
jnxBgpM2PathAttrMedPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the MED value is present.
If it is not present, the jnxBgpM2PathAttrMed
object has no useful value and should be set to 0."
::= { jnxBgpM2PathAttrEntry 4 }
jnxBgpM2PathAttrMed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system."
::= { jnxBgpM2PathAttrEntry 5 }
jnxBgpM2PathAttrLocalPrefPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the LocalPref value is present.
If it is not present, the jnxBgpM2PathAttrLocalPref
object has no useful value and should be set to 0."
::= { jnxBgpM2PathAttrEntry 6 }
jnxBgpM2PathAttrLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speakers degree of
preference for an advertised route."
::= { jnxBgpM2PathAttrEntry 7 }
jnxBgpM2PathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
atomicAggregatePresent(1),
atomicAggregateMissing(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present
and indicates that the NLRI MUST NOT be made
more specific."
::= { jnxBgpM2PathAttrEntry 8 }
jnxBgpM2PathAttrAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { jnxBgpM2PathAttrEntry 9 }
jnxBgpM2PathAttrAggregatorAddr OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A
value of 0.0.0.0 indicates the absence
of this attribute."
::= { jnxBgpM2PathAttrEntry 10 }
jnxBgpM2AsPathCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
AS Path according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { jnxBgpM2PathAttrEntry 11 }
jnxBgpM2AsPathString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { jnxBgpM2PathAttrEntry 12 }
jnxBgpM2AsPathIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the jnxBgpM2AsPathTable. It is assigned by the
agent at the point of creation of the jnxBgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2AsPathIndex row instance values across rows
of the jnxBgpM2AsPathTable."
::= { jnxBgpM2PathAttrEntry 13 }
--
-- As-4 byte AS_PATH
--
jnxBgpM2AsPath4byteTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space."
REFERENCE
"draft-ietf-idr-as4bytes-04.txt - BGP support for
four-octet AS number space"
::= { jnxBgpM2Rib 5 }
jnxBgpM2AsPath4byteEntry OBJECT-TYPE
SYNTAX JnxBgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the information for the AS 4-byte
extension's NEW_AS_PATH and NEW_AGGREGATOR attributes."
AUGMENTS {
jnxBgpM2PathAttrEntry
}
::= { jnxBgpM2AsPath4byteTable 1 }
JnxBgpM2AsPath4byteEntry ::= SEQUENCE {
jnxBgpM2AsPath4bytePathPresent
TruthValue,
jnxBgpM2AsPath4byteAggregatorAS
InetAutonomousSystemNumber,
jnxBgpM2AsPath4byteCalcLength
Unsigned32,
jnxBgpM2AsPath4byteString
SnmpAdminString,
jnxBgpM2AsPath4byteIndex
Unsigned32
}
jnxBgpM2AsPath4bytePathPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value may only be true if this BGP Speaker
is functioning as a router between ASs that
are in 2-byte and 4-byte AS space. If this
value is true, then the NEW_AS_PATH attributes
are present and the 4-byte versions of the
appropriate path attributes are in this row.
If this value is false, then the following values
will be present in the row:
jnxBgpM2PathAttrAggregatorAS - zero (0).
jnxBgpM2AsPathCalcLength - zero (0).
jnxBgpM2AsPathString - zero (0) length string.
jnxBgpM2AsPathIndex - zero (0)."
::= { jnxBgpM2AsPath4byteEntry 1 }
jnxBgpM2AsPath4byteAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NEW_AGGREGATOR AS number of the last BGP4 speaker
that performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { jnxBgpM2AsPath4byteEntry 2 }
jnxBgpM2AsPath4byteCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
NEW_AS_PATH according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { jnxBgpM2AsPath4byteEntry 3 }
jnxBgpM2AsPath4byteString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { jnxBgpM2AsPath4byteEntry 4 }
jnxBgpM2AsPath4byteIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the jnxBgpM2AsPathTable. It is assigned by the
agent at the point of creation of the jnxBgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2AsPathIndex row instance values across rows
of the jnxBgpM2AsPathTable. "
::= { jnxBgpM2AsPath4byteEntry 5 }
-- BGP 4 Path attribute AS Path Table. There is one row in
-- this table for each AS which is advertised for a given
-- route as provided from a peer.
-- JMH
-- We need one of these for the NewAsPath for the 4byte draft
jnxBgpM2AsPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer."
::= { jnxBgpM2Rib 6 }
jnxBgpM2AsPathEntry OBJECT-TYPE -- *** JNX ***
SYNTAX JnxBgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an AS path provided with a path to
a network."
INDEX {
jnxBgpM2PathAttrIndex,
jnxBgpM2AsPathSegmentIndex,
jnxBgpM2AsPathElementIndex,
jnxBgpM2AsPathElementValue
}
::= { jnxBgpM2AsPathTable 1 }
JnxBgpM2AsPathEntry ::= SEQUENCE {
jnxBgpM2AsPathSegmentIndex
Unsigned32,
jnxBgpM2AsPathElementIndex
Unsigned32,
jnxBgpM2AsPathType
INTEGER,
jnxBgpM2AsPathElementValue
InetAutonomousSystemNumber
}
jnxBgpM2AsPathSegmentIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS path segment index. This will index a set of
autonomous systems in an AS path which are part
of the same sequence or set (as determined by
the row value of jnxBgpM2AsPathType, which
should be the same value for each jnxBgpM2AsPathTable
entry indexed by the same (jnxBgpM2PathAttrIndex,
jnxBgpM2AsPathIndex) pair)."
::= { jnxBgpM2AsPathEntry 1 } -- *** JNX ***
jnxBgpM2AsPathElementIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS element index. This will index a particular
AS within a sequence or set of autonomous systems in
an AS path."
::= { jnxBgpM2AsPathEntry 2 } -- *** JNX ***
jnxBgpM2AsPathType OBJECT-TYPE
SYNTAX INTEGER {
asSet(1),
asSequence(2),
confedSequence(3),
confedSet(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of sequence in which this asPath
was advertised as an attribute. Note that
all asPath row instances for a given (jnxBgpM2PathAttrIndex,
jnxBgpM2AsPathIndex) index pair will have their
jnxBgpM2AsPathType set to the same value.
The values for jnxBgpM2AsPathType are
interpreted as defined in the base BGP document
and the BGP AS Confederations document."
REFERENCE
"draft-ietf-idr-bgp4-16
RFC 3065 - BGP AS Confederations"
::= { jnxBgpM2AsPathEntry 3 } -- *** JNX ***
jnxBgpM2AsPathElementValue OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An AS value for an AS the related NLRI traversed
in the propagation of its advertisement. This
value is to be interpreted in the context of the
sequence implied by jnxBgpM2AsPathIndex and
jnxBgpM2AsPathType (and, in sequence of the
other table rows with the same value of
jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex)."
::= { jnxBgpM2AsPathEntry 4 } -- *** JNX ***
-- BGP 4 Path unknown attribute. There is one row in
-- this table for each attribute not known by this BGP
-- implementation (or agent instrumentation), but provided
-- from a peer.
jnxBgpM2PathAttrUnknownTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
The absence of row data for a given index value for
jnxBgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that jnxBgpM2PathAttrIndex value in the
jnxBgpM2PathAttrTable)."
::= { jnxBgpM2Rib 7 }
jnxBgpM2PathAttrUnknownEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an unknown attribute
provided with a path to a network."
INDEX {
jnxBgpM2PathAttrIndex,
jnxBgpM2PathAttrUnknownIndex
}
::= { jnxBgpM2PathAttrUnknownTable 1 }
JnxBgpM2PathAttrUnknownEntry ::= SEQUENCE {
jnxBgpM2PathAttrUnknownIndex
Unsigned32,
jnxBgpM2PathAttrUnknownType
Unsigned32,
jnxBgpM2PathAttrUnknownValue
OCTET STRING
}
jnxBgpM2PathAttrUnknownIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { jnxBgpM2PathAttrUnknownEntry 1 }
jnxBgpM2PathAttrUnknownType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute type advertised with this unknown
attribute by the peer."
::= { jnxBgpM2PathAttrUnknownEntry 2 }
-- Maximum size of the following is derived as
-- 4096 max message size
-- - 16 BGP message marker bytes
-- - 2 BGP message size
-- - 1 BGP message type (UPDATE with unknown attr)
-- - 2 UPDATE routes length (even assuming no routes)
-- - 2 UPDATE path attributes length
-- - 1 path attribute flag octet
-- - 2 unknown path attr type (in jnxBgpM2PathAttrUnknownType)
-- ---------
-- 4070 bytes maximum per-message attribute value data
jnxBgpM2PathAttrUnknownValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4070))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of path attribute not understood
by the base BGP-4 document.
Octets beyond the maximum size, if any,
are not recorded by this row object. "
::= { jnxBgpM2PathAttrUnknownEntry 3 }
--
-- Path Attribute Extensions
--
jnxBgpM2PathAttrExtensions
OBJECT IDENTIFIER ::= { jnxBgpM2Rib 8 }
jnxBgpM2PathAttrNonCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 1 }
jnxBgpM2PathAttrCapExts
OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 2 }
--
-- Path Attribute Route Reflection Extensions
--
--
-- Originator ID Table
--
jnxBgpM2PathAttrRouteReflectionExts
OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 2796 }
jnxBgpM2PathAttrOriginatorIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrOriginatorIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per prefix data pertinent to advertisement of a
network prefix through an originator."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { jnxBgpM2PathAttrRouteReflectionExts 1 }
jnxBgpM2PathAttrOriginatorIdEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrOriginatorIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data pertinent to a network
prefix as received through its originating BGP
route reflector."
REFERENCE
"RFC 2796 - BGP Route Reflection"
INDEX {
jnxBgpM2PathAttrIndex
}
::= { jnxBgpM2PathAttrOriginatorIdTable 1 }
JnxBgpM2PathAttrOriginatorIdEntry ::= SEQUENCE {
jnxBgpM2PathAttrOriginatorId
JnxBgpM2Identifier
}
jnxBgpM2PathAttrOriginatorId OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector. A
value of 0.0.0.0 indicates the absence of this attribute."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { jnxBgpM2PathAttrOriginatorIdEntry 1 }
--
-- Cluster table
--
jnxBgpM2PathAttrClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)."
::= { jnxBgpM2PathAttrRouteReflectionExts 2 }
jnxBgpM2PathAttrClusterEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a cluster traversal
provided with a path to a network."
INDEX {
jnxBgpM2PathAttrIndex,
jnxBgpM2PathAttrClusterIndex
}
::= { jnxBgpM2PathAttrClusterTable 1 }
JnxBgpM2PathAttrClusterEntry ::= SEQUENCE {
jnxBgpM2PathAttrClusterIndex
Unsigned32,
jnxBgpM2PathAttrClusterValue
JnxBgpM2Identifier
}
jnxBgpM2PathAttrClusterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { jnxBgpM2PathAttrClusterEntry 1 }
jnxBgpM2PathAttrClusterValue OBJECT-TYPE
SYNTAX JnxBgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A four octet long value representing a part of the
reflection path that the route has passed. Each such four
octet long value represents the ID of a cluster that
the route has traversed. The sequence of this path as
received in the route advertisement will be preserved in
the sequence of jnxBgpM2PathAttrClusterTable rows (and the
jnxBgpM2PathAttrClusterValues in each row) as returned for
a given jnxBgpM2PathAttrIndex value, and the monotonically
increasing sequence of jnxBgpM2PathAttrClusterIndex values
for that jnxBgpM2PathAttrIndex."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { jnxBgpM2PathAttrClusterEntry 2 }
--
-- BGP Communities
--
jnxBgpM2PathAttrCommunityExts
OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 1997 }
jnxBgpM2PathAttrCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)."
::= { jnxBgpM2PathAttrCommunityExts 1 }
jnxBgpM2PathAttrCommEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a community association
provided with a path to a network."
INDEX {
jnxBgpM2PathAttrIndex,
jnxBgpM2PathAttrCommIndex
}
::= { jnxBgpM2PathAttrCommTable 1 }
JnxBgpM2PathAttrCommEntry ::= SEQUENCE {
jnxBgpM2PathAttrCommIndex
Unsigned32,
jnxBgpM2PathAttrCommValue
JnxBgpM2Community
}
jnxBgpM2PathAttrCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { jnxBgpM2PathAttrCommEntry 1 }
jnxBgpM2PathAttrCommValue OBJECT-TYPE
SYNTAX JnxBgpM2Community
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value representing a community. There are certain
4-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"RFC 1997 - BGP Communities Attribute"
::= { jnxBgpM2PathAttrCommEntry 2 }
--
-- BGP Extended Communities
--
jnxBgpM2PathAttrExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
XXX JMH - can not assign the OID until an RFC is published."
::= { jnxBgpM2PathAttrNonCapExts 65001 } -- *** JNX ***
jnxBgpM2PathAttrExtCommEntry OBJECT-TYPE
SYNTAX JnxBgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an extended community association
provided with a path to a network."
INDEX {
jnxBgpM2PathAttrIndex,
jnxBgpM2PathAttrExtCommIndex
}
::= { jnxBgpM2PathAttrExtCommTable 1 }
JnxBgpM2PathAttrExtCommEntry ::= SEQUENCE {
jnxBgpM2PathAttrExtCommIndex
Unsigned32,
jnxBgpM2PathAttrExtCommValue
JnxBgpM2ExtendedCommunity
}
jnxBgpM2PathAttrExtCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { jnxBgpM2PathAttrExtCommEntry 1 }
jnxBgpM2PathAttrExtCommValue OBJECT-TYPE
SYNTAX JnxBgpM2ExtendedCommunity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value representing an extended community which was
received with the route implied by the jnxBgpM2PathAttr
Index value of this row data. There are certain
8-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"BGP-EXTCOMM - BGP Extended Communities Attribute"
::= { jnxBgpM2PathAttrExtCommEntry 2 }
--
-- RFC 2545 link local nexthop
--
jnxBgpM2LinkLocalNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxBgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers."
REFERENCE
"RFC 2545 - Use of BGP-4 Multiprotocol Extensions
for IPv6 Inter-Domain Routing"
::= { jnxBgpM2PathAttrNonCapExts 2545 }
jnxBgpM2LinkLocalNextHopEntry OBJECT-TYPE
SYNTAX JnxBgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the link-local nexthops as sent
by a BGP speaker running RFC 2545 extensions for
double-nexthops."
INDEX {
jnxBgpM2PathAttrIndex
}
::= { jnxBgpM2LinkLocalNextHopTable 1 }
JnxBgpM2LinkLocalNextHopEntry ::= SEQUENCE {
jnxBgpM2LinkLocalNextHopPresent
TruthValue,
jnxBgpM2LinkLocalNextHop
InetAddress
}
jnxBgpM2LinkLocalNextHopPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if and only if the BGP
speaker is receiving IPv6 NLRI using the
RFC 2545 double nexthop convention and it
has received a link local scope nexthop in
addition to the global scope nexthop."
::= { jnxBgpM2LinkLocalNextHopEntry 1 }
jnxBgpM2LinkLocalNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains an IPv6 link local address of
InetAddressType of type ipv6z. This value is only
present if jnxBgpM2LinkLocalNextHopPresent is true."
::= { jnxBgpM2LinkLocalNextHopEntry 2 }
--
-- Conformance Information
--
jnxBgpM2Conformance
OBJECT IDENTIFIER ::= { jnxBgpM2 4 }
jnxBgpM2MIBCompliances OBJECT IDENTIFIER ::=
{ jnxBgpM2Conformance 1 }
jnxBgpM2MIBGroups OBJECT IDENTIFIER ::=
{ jnxBgpM2Conformance 2 }
jnxBgpM2MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the BGP4 mib."
MODULE -- this module
MANDATORY-GROUPS {
jnxBgpM2TimersGroup,
jnxBgpM2CountersGroup,
jnxBgpM2CapabilitiesGroup, -- *** JNX ***
jnxBgpM2AsPathGroup,
jnxBgpM2As4byteGroup,
jnxBgpM2BaseGroup,
jnxBgpM2ErrorsGroup,
jnxBgpM2PeerGroup,
jnxBgpM2PathAttributesGroup
}
GROUP jnxBgpM2MIBNotificationsGroup
DESCRIPTION
"The notifications group is completely optional,
but highly recommended."
GROUP jnxBgpM2AuthenticationGroup
DESCRIPTION
"The authentication group is
mandatory only for those implementations which
support sending and receiving authentication
information with peers in the BGP Authentication
Field."
GROUP jnxBgpM2CommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP community attribute."
GROUP jnxBgpM2ExtCommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP extended community attribute."
GROUP jnxBgpM2RouteReflectionGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP route reflection relationships."
GROUP jnxBgpM2AsConfederationGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP confederation membership."
-- *** JNX *** GROUP jnxBgpM2TimersGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2CountersGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2CapabilitiesGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2AsPathGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2As4byteGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2BaseGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2ErrorsGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2PeerGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
-- *** JNX *** GROUP jnxBgpM2PathAttributesGroup
-- *** JNX *** DESCRIPTION
-- *** JNX *** "This group is mandatory for all agent implementations."
GROUP jnxBgpM2PeerConfigurationGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration via SNMP."
GROUP jnxBgpM2PeerAuthConfigurationGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of BGP authentication via SNMP.
Implementation of this feature requires support of the
jnxBgpM2PeerConfigurationGroup."
GROUP jnxBgpM2PeerRouteReflectorCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of route reflection via SNMP.
Implementation of this feature requires support of the
jnxBgpM2PeerConfigurationGroup."
GROUP jnxBgpM2PeerAsConfederationCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of BGP AS Confederations via SNMP.
Implementation of this feature requires support of the
jnxBgpM2PeerConfigurationGroup."
GROUP jnxBgpM2Rfc2545Group
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { jnxBgpM2MIBCompliances 1 }
jnxBgpM2AuthenticationGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2SupportedAuthCode,
jnxBgpM2SupportedAuthValue,
jnxBgpM2PeerAuthSent,
jnxBgpM2PeerAuthSentCode,
jnxBgpM2PeerAuthSentValue,
jnxBgpM2PeerAuthRcvd,
jnxBgpM2PeerAuthRcvdCode,
jnxBgpM2PeerAuthRcvdValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP authentication."
::= { jnxBgpM2MIBGroups 1 }
jnxBgpM2CommunitiesGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PathAttrCommIndex,
jnxBgpM2PathAttrCommValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP communities."
::= { jnxBgpM2MIBGroups 2 }
jnxBgpM2ExtCommunitiesGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PathAttrExtCommIndex,
jnxBgpM2PathAttrExtCommValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP extended communities."
::= { jnxBgpM2MIBGroups 3 }
jnxBgpM2RouteReflectionGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2RouteReflector,
jnxBgpM2ClusterId,
jnxBgpM2PeerReflectorClient,
jnxBgpM2PathAttrOriginatorId,
jnxBgpM2PathAttrClusterIndex,
jnxBgpM2PathAttrClusterValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP route reflection."
::= { jnxBgpM2MIBGroups 4 }
jnxBgpM2AsConfederationGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2ConfederationRouter,
jnxBgpM2ConfederationId,
jnxBgpM2PeerConfedMember
}
STATUS current
DESCRIPTION
"Objects associated with BGP confederation membership."
::= { jnxBgpM2MIBGroups 5 }
jnxBgpM2TimersGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PeerFsmEstablishedTime,
jnxBgpM2PeerInUpdatesElapsedTime,
jnxBgpM2PeerConnectRetryInterval,
jnxBgpM2PeerHoldTimeConfigured,
jnxBgpM2PeerKeepAliveConfigured,
jnxBgpM2PeerMinASOrigInterval,
jnxBgpM2PeerMinRouteAdverInterval,
jnxBgpM2PeerHoldTime,
jnxBgpM2PeerKeepAlive
}
STATUS current
DESCRIPTION
"Objects associated with BGP peering timers."
::= { jnxBgpM2MIBGroups 6 }
jnxBgpM2CountersGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PeerInUpdates,
jnxBgpM2PeerOutUpdates,
jnxBgpM2PeerInTotalMessages,
jnxBgpM2PeerOutTotalMessages,
jnxBgpM2PeerFsmEstablishedTrans,
jnxBgpM2PrefixCountersAfi,
jnxBgpM2PrefixCountersSafi,
jnxBgpM2PrefixInPrefixes,
jnxBgpM2PrefixInPrefixesAccepted,
jnxBgpM2PrefixInPrefixesRejected,
jnxBgpM2PrefixOutPrefixes
}
STATUS current
DESCRIPTION
"Objects to count discrete events and exchanges on BGP
sessions."
::= { jnxBgpM2MIBGroups 7 }
jnxBgpM2CapabilitiesGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2CapabilitySupportAvailable,
jnxBgpM2SupportedCapabilityCode,
jnxBgpM2SupportedCapability,
jnxBgpM2PeerCapAnnouncedCode,
jnxBgpM2PeerCapAnnouncedIndex,
jnxBgpM2PeerCapAnnouncedValue,
jnxBgpM2PeerCapReceivedCode,
jnxBgpM2PeerCapReceivedIndex,
jnxBgpM2PeerCapReceivedValue
}
STATUS current
DESCRIPTION
"Objects to report capabilities as received on BGP
sessions."
::= { jnxBgpM2MIBGroups 8 }
jnxBgpM2AsPathGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2AsPathSegmentIndex,
jnxBgpM2AsPathElementIndex,
jnxBgpM2AsPathType,
jnxBgpM2AsPathElementValue
}
STATUS current
DESCRIPTION
"Objects to report AS paths received on BGP NLRIs."
::= { jnxBgpM2MIBGroups 9 }
jnxBgpM2As4byteGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2AsSize,
jnxBgpM2AsPath4bytePathPresent,
jnxBgpM2AsPath4byteAggregatorAS,
jnxBgpM2AsPath4byteCalcLength,
jnxBgpM2AsPath4byteString,
jnxBgpM2AsPath4byteIndex
}
STATUS current
DESCRIPTION
"AS Size objects."
::= { jnxBgpM2MIBGroups 10 }
jnxBgpM2BaseGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2LocalAs,
jnxBgpM2LocalIdentifier,
jnxBgpM2VersionIndex,
jnxBgpM2VersionSupported
}
STATUS current
DESCRIPTION
"Basic objects in local BGP implementation."
::= { jnxBgpM2MIBGroups 11 }
jnxBgpM2ErrorsGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PeerLastErrorReceived,
jnxBgpM2PeerLastErrorReceivedData,
jnxBgpM2PeerLastErrorReceivedTime,
jnxBgpM2PeerLastErrorReceivedText,
jnxBgpM2PeerLastErrorSent,
jnxBgpM2PeerLastErrorSentData,
jnxBgpM2PeerLastErrorSentTime,
jnxBgpM2PeerLastErrorSentText
}
STATUS current
DESCRIPTION
"Errors received on BGP peering sessions."
::= { jnxBgpM2MIBGroups 12 }
jnxBgpM2PeerGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PeerIdentifier,
jnxBgpM2PeerState,
jnxBgpM2PeerStatus,
jnxBgpM2PeerConfiguredVersion,
jnxBgpM2PeerNegotiatedVersion,
jnxBgpM2PeerLocalAddrType,
jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerLocalPort,
jnxBgpM2PeerLocalAs,
jnxBgpM2PeerRemoteAddrType,
jnxBgpM2PeerRemoteAddr,
jnxBgpM2PeerRemotePort,
jnxBgpM2PeerRemoteAs,
jnxBgpM2PeerRoutingInstance, -- *** JNX ***
jnxBgpM2PeerIndex
}
STATUS current
DESCRIPTION
"Core object types on BGP peering sessions."
::= { jnxBgpM2MIBGroups 13 }
jnxBgpM2PathAttributesGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2PathAttrCount,
jnxBgpM2AsPathCalcLength,
jnxBgpM2AsPathElementValue,
jnxBgpM2AsPathIndex,
jnxBgpM2AsPathString,
jnxBgpM2AsPathType,
jnxBgpM2NlriAfi,
jnxBgpM2NlriBest,
jnxBgpM2NlriPrefix,
jnxBgpM2NlriPrefixLen,
jnxBgpM2NlriSafi,
jnxBgpM2NlriOpaqueType,
jnxBgpM2NlriOpaquePointer,
jnxBgpM2NlriIndex,
jnxBgpM2NlriCalcLocalPref,
jnxBgpM2AdjRibsOutIndex,
jnxBgpM2AdjRibsOutRoute,
jnxBgpM2PathAttrAggregatorAS,
jnxBgpM2PathAttrAggregatorAddr,
jnxBgpM2PathAttrAtomicAggregate,
jnxBgpM2PathAttrIndex,
jnxBgpM2PathAttrLocalPref,
jnxBgpM2PathAttrLocalPrefPresent,
jnxBgpM2PathAttrMed,
jnxBgpM2PathAttrMedPresent,
jnxBgpM2PathAttrNextHop,
jnxBgpM2PathAttrNextHopAddrType,
jnxBgpM2PathAttrOrigin,
jnxBgpM2PathAttrUnknownIndex,
jnxBgpM2PathAttrUnknownType,
jnxBgpM2PathAttrUnknownValue
}
STATUS current
DESCRIPTION
"Attributes received on BGP peering sessions."
::= { jnxBgpM2MIBGroups 14 }
jnxBgpM2PeerConfigurationGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2CfgBaseScalarStorageType,
jnxBgpM2CfgLocalAs,
jnxBgpM2CfgLocalIdentifier,
jnxBgpM2CfgPeerAdminStatus,
jnxBgpM2CfgPeerNextIndex,
jnxBgpM2CfgPeerConfiguredVersion,
jnxBgpM2CfgAllowVersionNegotiation,
jnxBgpM2CfgPeerLocalAddrType,
jnxBgpM2CfgPeerLocalAddr,
jnxBgpM2CfgPeerLocalAs,
jnxBgpM2CfgPeerRemoteAddrType,
jnxBgpM2CfgPeerRemoteAddr,
jnxBgpM2CfgPeerRemotePort,
jnxBgpM2CfgPeerRemoteAs,
jnxBgpM2CfgPeerEntryStorageType,
jnxBgpM2CfgPeerError,
jnxBgpM2CfgPeerBgpPeerEntry,
jnxBgpM2CfgPeerRowEntryStatus,
-- jnxBgpM2CfgPeerIndex, *** JNX ***
jnxBgpM2CfgPeerStatus,
jnxBgpM2CfgPeerConnectRetryInterval,
jnxBgpM2CfgPeerHoldTimeConfigured,
jnxBgpM2CfgPeerKeepAliveConfigured,
jnxBgpM2CfgPeerMinASOrigInterval,
jnxBgpM2CfgPeerMinRouteAdverInter
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers."
::= { jnxBgpM2MIBGroups 15 }
jnxBgpM2PeerAuthConfigurationGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2CfgPeerAuthEnabled,
jnxBgpM2CfgPeerAuthCode,
jnxBgpM2CfgPeerAuthValue
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support
authentication."
::= { jnxBgpM2MIBGroups 16 }
jnxBgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2CfgRouteReflector,
jnxBgpM2CfgClusterId,
jnxBgpM2CfgPeerReflectorClient
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support route
reflection."
::= { jnxBgpM2MIBGroups 17 }
jnxBgpM2PeerAsConfederationCfgGroup OBJECT-GROUP
OBJECTS {
jnxBgpM2CfgConfederationRouter,
jnxBgpM2CfgConfederationId,
jnxBgpM2CfgPeerConfedMember
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support BGP
confederations."
::= { jnxBgpM2MIBGroups 18 }
jnxBgpM2MIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
jnxBgpM2Established,
jnxBgpM2BackwardTransition
}
STATUS current
DESCRIPTION
"This group contains objects for notifications
supported by this mib module."
::= { jnxBgpM2MIBGroups 19 }
jnxBgpM2Rfc2545Group OBJECT-GROUP
OBJECTS {
jnxBgpM2LinkLocalNextHopPresent,
jnxBgpM2LinkLocalNextHop
}
STATUS current
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { jnxBgpM2MIBGroups 20 }
END