1115 lines
43 KiB
Plaintext
1115 lines
43 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-ACCOUNTING-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Accounting MIB
|
|
--
|
|
-- Copyright (c) 1999 Redstone Communications, Inc.
|
|
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-ACCOUNTING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Integer32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
RowStatus, DisplayString
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
acctngSelectionEntry, acctngSelectionIndex, acctngFileEntry
|
|
FROM ACCOUNTING-CONTROL-MIB
|
|
juniMibs
|
|
FROM Juniper-MIBs
|
|
juniIfType
|
|
FROM Juniper-UNI-IF-MIB
|
|
JuniAcctngOperType, JuniAcctngAdminType, JuniInterfaceDescrFormat,
|
|
JuniInterfaceLocation, JuniEnable
|
|
FROM Juniper-TC
|
|
JuniPolicyAttachmentType
|
|
FROM Juniper-POLICY-MIB;
|
|
|
|
juniAcctngMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200907161500Z" -- 16-Jul-09 10:0 AM EST
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The accounting MIB for the Juniper Networks enterprise. This MIB
|
|
augments with the Virtual Router Accounting MIB specified in RLI618."
|
|
-- Revision History
|
|
REVISION "200907161500Z" -- 16-Jul-09 10:0 AM EST - JUNOSe 11.0
|
|
DESCRIPTION
|
|
"Added Qos Schema IDs"
|
|
REVISION "200504261500Z" -- 26-Apr-05 10:00 AM EST - JUNOSe 7.1
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added Virtual Router Based Accounting Config (RLI618)"
|
|
REVISION "200302281500Z" -- 28-Feb-03 10:00 AM EST - JUNOSe 5.1
|
|
DESCRIPTION
|
|
"Added IGMP schema IDs."
|
|
REVISION "200212171537Z" -- 17-Dec-02 10:37 AM EST - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Replaced Unisphere names with Juniper names.
|
|
o Added juniAcctngInterfaceDescrFormat,
|
|
juniAcctngInterfaceNumberingMode and juniAcctngFileFormat.
|
|
o Changed the indexing scheme to the juniAcctngInterfaceTable to allow
|
|
specification by interface type, fileIndex and interface location.
|
|
Gave the table a new OID."
|
|
REVISION "200112051416Z" -- 05-Dec-01 09:16 AM EST - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngSelectionPolicyName and
|
|
juniAcctngSelectionPolicyType objects to juniAcctngSelectionTable
|
|
o Added juniAcctngSelectionSchemaPolicy and associated policy
|
|
statistic OIDs "
|
|
REVISION "200111191900Z" -- 19-Nov-01 02:00 PM EST - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngifInMulticastPkts
|
|
o Added juniAcctngifInBroadcastPkts
|
|
o Added juniAcctngifOutMulticastPkts
|
|
o Added juniAcctngifOutBroadcastPkts "
|
|
REVISION "200103261322Z" -- 26-Mar-01 08:22 AM EST - JUNOSe 3.2
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngSelectionSchemaSystem
|
|
o Deprecated juniAcctngSelectionSubtreeType "
|
|
REVISION "200011071900Z" -- 07-Nov-00 03:00 PM EDT - JUNOSe 2.6
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngIfTimeOffset "
|
|
REVISION "200007210000Z" -- 21-Jul-00 - JUNOSe 2.2
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngIfCorrelator
|
|
o Added juniAcctngIfInPolicedOctets
|
|
o Added juniAcctngIfInPolicedPkts
|
|
o Added juniAcctngIfInSpoofedPkts
|
|
o Added juniAcctngIfOutPolicedOctets
|
|
o Added juniAcctngIfOutPolicedPkts
|
|
o Added juniAcctngIfOutSchedulerDropOctets
|
|
o Added juniAcctngIfOutSchedulerDropPkts
|
|
o Added juniAcctngIfLowerInterface "
|
|
REVISION "200003200000Z" -- 20-Mar-00 - JUNOSe 2.0
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Moved juniAcctngSelectionMaxIfStackLevels
|
|
o Added juniAcctngSelectionSubtreeType
|
|
o Added juniAcctngIfCorrelator
|
|
o Removed juniAcctngSelectionSchemaPpp "
|
|
REVISION "200001170000Z" -- 17-Jan-00 - JUNOSe 1.3
|
|
DESCRIPTION
|
|
"Key revisions include:
|
|
o Added juniAcctngSelectionMaxIfStackLevels
|
|
o Added juniAcctngSelectionIfStackStartTable
|
|
o Added juniAcctngSelectionSchemaIfStack "
|
|
REVISION "9910180000Z" -- 18-Oct-99 - JUNOSe 1.1
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { juniMibs 24 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- MIB Structure
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniAcctngMIBObjects OBJECT IDENTIFIER ::= { juniAcctngMIB 1 }
|
|
|
|
juniAcctngSelectionControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 1 }
|
|
juniAcctngFileControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 2 }
|
|
juniAcctngInterfaceControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 3 }
|
|
juniAcctngScalarGroup OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 4 }
|
|
juniAcctngVirtualRouterControl OBJECT IDENTIFIER ::= { juniAcctngMIBObjects 5 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- MIB Objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- The Juniper Accounting Scalar Group
|
|
--
|
|
juniAcctngInterfaceDescrFormat OBJECT-TYPE
|
|
SYNTAX JuniInterfaceDescrFormat
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The format of the interface descriptions reported by the accounting
|
|
application."
|
|
::= { juniAcctngScalarGroup 1 }
|
|
|
|
juniAcctngInterfaceNumberingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
proprietaryNumbering(0),
|
|
rfc1213Number(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The format of the interface descriptions reported by the accounting
|
|
application."
|
|
::= { juniAcctngScalarGroup 2 }
|
|
|
|
juniAcctngFileFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
includeCR(0),
|
|
includeCRLF(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file format of the accounting file."
|
|
::= { juniAcctngScalarGroup 3 }
|
|
|
|
|
|
--
|
|
-- The Accounting Information Selection table
|
|
--
|
|
juniAcctngSelectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngSelectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of accounting information selection entries.
|
|
|
|
Note that additions, modifications and deletions of entries in this
|
|
table can occur at any time, but such changes only take effect on the
|
|
next occasion when collection begins into a new interval. Thus, between
|
|
modification and the next 'swap', the content of this table does not
|
|
reflect the current selection."
|
|
::= { juniAcctngSelectionControl 1 }
|
|
|
|
juniAcctngSelectionEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngSelectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry used to extend the the selection entry in
|
|
acctngSelectionEntry. This conceptual row extension is used for
|
|
Juniper accounting extensions for connectionless data collection."
|
|
AUGMENTS { acctngSelectionEntry }
|
|
::= { juniAcctngSelectionTable 1 }
|
|
|
|
JuniAcctngSelectionEntry ::= SEQUENCE {
|
|
juniAcctngSelectionType BITS,
|
|
juniAcctngSelectionMode INTEGER,
|
|
juniAcctngSelectionSubtreeType INTEGER,
|
|
juniAcctngSelectionMaxIfStackLevels Integer32,
|
|
juniAcctngSelectionPolicyName DisplayString,
|
|
juniAcctngSelectionPolicyType JuniPolicyAttachmentType,
|
|
juniAcctngSelectionIfCreateDeleteStats JuniEnable,
|
|
juniAcctngSelectionIfCreateDeleteStatsIfTypes BITS }
|
|
|
|
juniAcctngSelectionType OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ietfAccountControl(0),
|
|
connectionLessLayer2(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the types of connections for which the information selected
|
|
by this entry are to be collected. The ietfAccountControl(0) bit
|
|
position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType
|
|
in the base conceptual row determines the selection type. All other bit
|
|
positions for this object over-ride the acctngSelectionType in the base
|
|
conceptual row. When the value of this object over-rides the
|
|
acctngSelectionType object, the following objects have no meaning:
|
|
|
|
ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts
|
|
ACCOUNTING-CONTROL-MIB.acctngFileMinAge
|
|
|
|
because they control or are related to connection oriented accounting."
|
|
::= { juniAcctngSelectionEntry 1 }
|
|
|
|
juniAcctngSelectionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
absoluteCounterValues(1),
|
|
deltaCounterValues(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the data collection mode."
|
|
DEFVAL { deltaCounterValues }
|
|
::= { juniAcctngSelectionEntry 2 }
|
|
|
|
juniAcctngSelectionSubtreeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
lineCard(1),
|
|
systemController(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates the origin of the collection, given the row's subtree. The
|
|
architecture implementation for statistics collection imposes that rows
|
|
with distinct juniAcctngSelectionSubtreeType may not be collected into
|
|
the same accounting file. Conversely, different files (configured from
|
|
acctngSelectionFile) entries are necessary in order to collect from
|
|
subtrees (configured from acctngSelectionSubtree) that imply into
|
|
different subtree types (juniAcctngSelectionSubtreeType)."
|
|
::= { juniAcctngSelectionEntry 3 }
|
|
|
|
juniAcctngSelectionMaxIfStackLevels OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of levels in the ifStack table to be
|
|
returned when using the ifStack accounting schema. This object is
|
|
ignored if acctngSelectionSubtree is not set to
|
|
juniAcctngSelectionSchemaIfStack. When this object is zero, the entire
|
|
stack above the starting point(s) given will be returned. When this
|
|
object is set to 1, only ifIndexes stacked above the starting point(s)
|
|
given will be returned."
|
|
DEFVAL { 0 }
|
|
::= { juniAcctngSelectionEntry 4 }
|
|
|
|
juniAcctngSelectionPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the policy associated with the statistics
|
|
collected when using the policy accounting schema. This object is
|
|
ignored if acctngSelectionSubtree is not set to
|
|
juniAcctngSelectionSchemaPolicy."
|
|
DEFVAL { "" }
|
|
::= { juniAcctngSelectionEntry 5 }
|
|
|
|
juniAcctngSelectionPolicyType OBJECT-TYPE
|
|
SYNTAX JuniPolicyAttachmentType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the attachment point for the policy associated with the
|
|
statistics collected when using the policy accounting schema. This
|
|
object is ignored if acctngSelectionSubtree is not set to
|
|
juniAcctngSelectionSchemaPolicy."
|
|
DEFVAL { noPolicy }
|
|
::= { juniAcctngSelectionEntry 6 }
|
|
|
|
juniAcctngSelectionIfCreateDeleteStats OBJECT-TYPE
|
|
SYNTAX JuniEnable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable interfaces create and delete statistics collection."
|
|
DEFVAL { disable }
|
|
::= { juniAcctngSelectionEntry 7 }
|
|
|
|
juniAcctngSelectionIfCreateDeleteStatsIfTypes OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ip(0),
|
|
ppp(1),
|
|
atm1483(2),
|
|
vlan(3),
|
|
mplsMajor(4),
|
|
mplsL2Shim(5),
|
|
mplsMinor(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface-types that are used in the configuration of the create/delete
|
|
statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN.
|
|
These interface-types are allowed to configure if the interfaces create/delete stats
|
|
feature is enabled i.e juniAcctngSelectionIfCreateDeleteStats == enable."
|
|
::= { juniAcctngSelectionEntry 8 }
|
|
|
|
--
|
|
-- The Accounting Information ifStack Selection
|
|
--
|
|
juniAcctngSelectionIfStackStartTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngSelectionIfStackStartEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of ifIndexes to be used as starting point when using the ifStack
|
|
selection schema.
|
|
|
|
Note that additions, modifications and deletions of entries in this
|
|
table can occur at any time, but such changes only take effect on the
|
|
next occasion when collection begins into a new interval. Thus, between
|
|
modification and the next 'swap', the content of this table does not
|
|
reflect the current selection."
|
|
::= { juniAcctngSelectionControl 3 }
|
|
|
|
juniAcctngSelectionIfStackStartEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngSelectionIfStackStartEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry used to determine the starting point entry when using the
|
|
ifStack schema."
|
|
INDEX { acctngSelectionIndex,
|
|
juniAcctngSelectionIfStackIfIndex }
|
|
::= { juniAcctngSelectionIfStackStartTable 1 }
|
|
|
|
JuniAcctngSelectionIfStackStartEntry ::= SEQUENCE {
|
|
juniAcctngSelectionIfStackIfIndex InterfaceIndex,
|
|
juniAcctngSelectionIfStackRowStatus RowStatus }
|
|
|
|
juniAcctngSelectionIfStackIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex to be used as a starting point in the interface stack
|
|
configuration. The interfaces to be returned in the ifStack schema will
|
|
start from this value, going up."
|
|
::= { juniAcctngSelectionIfStackStartEntry 1 }
|
|
|
|
juniAcctngSelectionIfStackRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls creation/deletion of entries in this table."
|
|
::= { juniAcctngSelectionIfStackStartEntry 2 }
|
|
|
|
|
|
--
|
|
-- The Accounting File Table
|
|
--
|
|
juniAcctngFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value identifying the file transfer behavior and the the file
|
|
to where accounting data is to be stored."
|
|
::= { juniAcctngFileControl 1 }
|
|
|
|
juniAcctngFileEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry used to extend the file management of acctngFileEntry. This
|
|
conceptual row extension is used for Juniper accounting extensions to
|
|
automate the transfer of accounting data to remote hosts."
|
|
AUGMENTS { acctngFileEntry }
|
|
::= { juniAcctngFileTable 1 }
|
|
|
|
JuniAcctngFileEntry ::= SEQUENCE {
|
|
juniAcctngFileXferMode INTEGER,
|
|
juniAcctngFileXferIndex INTEGER,
|
|
juniAcctngFileXferSecondaryIndex INTEGER }
|
|
|
|
juniAcctngFileXferMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniAcctngManualTransfer(1),
|
|
juniAcctngAutomatedTransfer(2),
|
|
juniAcctngTransferOnFileFull(3),
|
|
juniAcctngRedundantTransfer(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode to use for transfering accounting data to remote
|
|
client.
|
|
|
|
juniAcctngManualTransfer - Administrator is responsible for manually
|
|
transfering collected accounting data off of the system.
|
|
|
|
juniAcctngAutomatedTransfer - The agent will automatically transfer the
|
|
collected accounting data based at a acctngFileIntervals using an entry
|
|
in the juniFileXferTable pointed to by juniAcctngFileXferIndex. If a
|
|
manager sets this object to this value, a corresponding row in the
|
|
juniFileXferTable must exist, otherwise the set command will fail.
|
|
|
|
juniActngTransferOnFileFull - The agent will automatically transfer the
|
|
collected accounting data when the file reaches the maximum size defined
|
|
by acctngFileMaximumSize. If a manager sets this object to this value,
|
|
a corresponding row in the juniFileXferTable must exist, otherwise the
|
|
set command will fail.
|
|
|
|
juniAcctngRedundantTransfer - The agent will automatically transfer two
|
|
copies of the accounting data based on the acctngFileInterval. One copy
|
|
will go to the juniFileXferTable entry identified by
|
|
juniAcctngFileXferIndex and one copy will go the the juniFileXferTable
|
|
entry identified by juniAcctngFileXferSecondaryIndex."
|
|
::= { juniAcctngFileEntry 1 }
|
|
|
|
juniAcctngFileXferIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies an entry in the juniFileXferTable, which defines the file
|
|
transfer parameters to use when the agent is configured to automatically
|
|
transfer collected accounting data files. A set to this object will
|
|
fail if a corresponding entry in the juniFileXferTable does not exist or
|
|
it is not set to juniFileXferAcctngStatistics."
|
|
::= { juniAcctngFileEntry 2 }
|
|
|
|
juniAcctngFileXferSecondaryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a backup or secondary entry in the juniFileXferTable, which
|
|
defines the file transfer parameters to use when the agent is configured
|
|
to automatically transfer collected accounting data files. A set to
|
|
this object will fail if a corresponding entry in the juniFileXferTable
|
|
does not exist or it is not set to juniFileXferAcctngStatistics."
|
|
::= { juniAcctngFileEntry 3 }
|
|
|
|
|
|
--
|
|
-- Obsolete Per-interface Type Control Table
|
|
-- This table was obsoleted when the indexing changed.
|
|
--
|
|
juniAcctngObsInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngObsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This table was obsoleted when the indexing changed."
|
|
::= { juniAcctngInterfaceControl 1 }
|
|
|
|
juniAcctngObsInterfaceEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngObsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete table entry."
|
|
INDEX { juniIfType }
|
|
::= { juniAcctngObsInterfaceTable 1 }
|
|
|
|
JuniAcctngObsInterfaceEntry ::= SEQUENCE {
|
|
juniAcctngObsInterfaceAdminStatus JuniAcctngAdminType,
|
|
juniAcctngObsInterfaceOperStatus JuniAcctngOperType,
|
|
juniAcctngObsInterfaceRowStatus RowStatus,
|
|
juniAcctngObsInterfaceAccntgFileIndex Integer32 }
|
|
|
|
juniAcctngObsInterfaceAdminStatus OBJECT-TYPE
|
|
SYNTAX JuniAcctngAdminType
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete object."
|
|
::= { juniAcctngObsInterfaceEntry 1 }
|
|
|
|
juniAcctngObsInterfaceOperStatus OBJECT-TYPE
|
|
SYNTAX JuniAcctngOperType
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete object."
|
|
::= { juniAcctngObsInterfaceEntry 2 }
|
|
|
|
juniAcctngObsInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete object."
|
|
::= { juniAcctngObsInterfaceEntry 3 }
|
|
|
|
juniAcctngObsInterfaceAccntgFileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete object."
|
|
::= { juniAcctngObsInterfaceEntry 4 }
|
|
|
|
|
|
--
|
|
-- Per-interface Type Control Table
|
|
--
|
|
juniAcctngInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table controlling the collection of accounting data on specific
|
|
interfaces types. This table provides an efficient mechanism to enable
|
|
and/or disable data collection on all interfaces of a specified type.
|
|
This table replaces the obsolete version with the same name."
|
|
::= { juniAcctngInterfaceControl 2 }
|
|
|
|
juniAcctngInterfaceEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry which controls whether accounting data is to be collected on
|
|
interfaces of a specific type, to a specific accounting file and by the
|
|
systems interface location."
|
|
INDEX { juniIfType,
|
|
juniAcctngInterfaceFileIndex,
|
|
juniAcctngInterfaceLocation }
|
|
::= { juniAcctngInterfaceTable 1 }
|
|
|
|
JuniAcctngInterfaceEntry ::= SEQUENCE {
|
|
juniAcctngInterfaceFileIndex Integer32,
|
|
juniAcctngInterfaceLocation JuniInterfaceLocation,
|
|
juniAcctngInterfaceAdminStatus JuniAcctngAdminType,
|
|
juniAcctngInterfaceOperStatus JuniAcctngOperType,
|
|
juniAcctngInterfaceRowStatus RowStatus }
|
|
|
|
juniAcctngInterfaceFileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object selects the acctngFileTable entry for the collection
|
|
statistics for this interface type. The value of this object is the
|
|
same as the acctngFileIndex and is used to cross reference accounting
|
|
data files in the AcctngFileTable.
|
|
|
|
If the value of this object is zero (special value), then the combined
|
|
interface type/location defined by this entry is collected into all
|
|
entries in the acctngFileTable, i.e., all accounting files."
|
|
::= { juniAcctngInterfaceEntry 1 }
|
|
|
|
juniAcctngInterfaceLocation OBJECT-TYPE
|
|
SYNTAX JuniInterfaceLocation
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface location specification for this entry. If the value of
|
|
this entry is a zero length string, then all system locations are
|
|
included for the interface type defined by juniIfType."
|
|
::= { juniAcctngInterfaceEntry 2 }
|
|
|
|
juniAcctngInterfaceAdminStatus OBJECT-TYPE
|
|
SYNTAX JuniAcctngAdminType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired administrative state for accounting data collection for
|
|
interfaces defined by the type of this entry. The administrative scope
|
|
is for all interfaces of the type defined by the corresponding
|
|
juniIfType for this entry."
|
|
::= { juniAcctngInterfaceEntry 3 }
|
|
|
|
juniAcctngInterfaceOperStatus OBJECT-TYPE
|
|
SYNTAX JuniAcctngOperType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state for accounting data collection on for all
|
|
interfaces corresponding to this entries type."
|
|
::= { juniAcctngInterfaceEntry 4 }
|
|
|
|
juniAcctngInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls creation/deletion of entries in this table."
|
|
::= { juniAcctngInterfaceEntry 5 }
|
|
|
|
--
|
|
-- Per-slot interface final stats transfer statistics Table
|
|
--
|
|
|
|
juniAcctngIfFinalStatsXferStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngIfFinalStatsXferStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table to display line cards interfaces final statistics transfer
|
|
statistics."
|
|
::= { juniAcctngInterfaceControl 3 }
|
|
|
|
juniAcctngIfFinalStatsXferStatsEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngIfFinalStatsXferStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is a display of one line card's interfaces final statistics
|
|
transfer statistics."
|
|
INDEX { juniAcctngIfFinalStatsXferStatsSlotNumber }
|
|
::= { juniAcctngIfFinalStatsXferStatsTable 1 }
|
|
|
|
JuniAcctngIfFinalStatsXferStatsEntry ::= SEQUENCE {
|
|
juniAcctngIfFinalStatsXferStatsSlotNumber Integer32,
|
|
juniAcctngIfFinalStatsXferStatsReceived Unsigned32,
|
|
juniAcctngIfFinalStatsXferStatsTransferred Unsigned32,
|
|
juniAcctngIfFinalStatsXferStatsDropped Unsigned32 }
|
|
|
|
juniAcctngIfFinalStatsXferStatsSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..14)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object selects the slot number to display interfaces final statistics
|
|
transfer statistics for the line module on that slot."
|
|
::= { juniAcctngIfFinalStatsXferStatsEntry 1 }
|
|
|
|
juniAcctngIfFinalStatsXferStatsReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the total received interfaces final statistics records for the line module."
|
|
::= { juniAcctngIfFinalStatsXferStatsEntry 2 }
|
|
|
|
juniAcctngIfFinalStatsXferStatsTransferred OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the total transferred interfaces final statistics records for the line module."
|
|
::= { juniAcctngIfFinalStatsXferStatsEntry 3 }
|
|
|
|
juniAcctngIfFinalStatsXferStatsDropped OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the total dropped interfaces final statistics records for the line module."
|
|
::= { juniAcctngIfFinalStatsXferStatsEntry 4 }
|
|
|
|
--
|
|
-- The Virtual Router Accounting Control Information
|
|
--
|
|
juniAcctngVirtualRouterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniAcctngVirtualRouterTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Table stores the configuration of Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be
|
|
configured per collector (file index)"
|
|
::= { juniAcctngVirtualRouterControl 1 }
|
|
|
|
juniAcctngVirtualRouterTableEntry OBJECT-TYPE
|
|
SYNTAX JuniAcctngVirtualRouterTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry used to determine the starting point entry when using the
|
|
ifStack schema."
|
|
INDEX { juniAcctngVirtualRouterTableIndex }
|
|
::= { juniAcctngVirtualRouterTable 1 }
|
|
|
|
JuniAcctngVirtualRouterTableEntry ::= SEQUENCE {
|
|
juniAcctngVirtualRouterTableIndex Integer32,
|
|
juniAcctngVirtualRouterTableVRName DisplayString,
|
|
juniAcctngVirtualRouterTableRowStatus RowStatus }
|
|
|
|
juniAcctngVirtualRouterTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Index to be used as a starting point in the Virtual Router Table
|
|
configuration. The index to be returned in the Virtual Router Table will
|
|
start from this value, going up."
|
|
::= { juniAcctngVirtualRouterTableEntry 1 }
|
|
|
|
juniAcctngVirtualRouterTableVRName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Router name(s) space separated."
|
|
::= { juniAcctngVirtualRouterTableEntry 2 }
|
|
|
|
juniAcctngVirtualRouterTableRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls creation/deletion of entries in this table."
|
|
::= { juniAcctngVirtualRouterTableEntry 3 }
|
|
--
|
|
-- enterprise schema information
|
|
--
|
|
juniAcctngSelectionSchema OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The root OBJECT IDENTIFIER under which accounting selection tree
|
|
objects are assigned."
|
|
::= { juniAcctngMIB 2 }
|
|
|
|
|
|
juniAcctngSelectionSchemaIf OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 1 }
|
|
|
|
juniAcctngIfInOctets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 1 }
|
|
juniAcctngIfInUcastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 2 }
|
|
juniAcctngIfInDiscards OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 3 }
|
|
juniAcctngIfInErrors OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 4 }
|
|
juniAcctngIfInUnknownProtos OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 5 }
|
|
juniAcctngIfOutOctets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 6 }
|
|
juniAcctngIfOutUcastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 7 }
|
|
juniAcctngIfOutDiscards OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 8 }
|
|
juniAcctngIfOutErrors OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 9 }
|
|
juniAcctngIfCorrelator OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 10 }
|
|
juniAcctngIfInPolicedOctets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 11 }
|
|
juniAcctngIfInPolicedPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 12 }
|
|
juniAcctngIfInSpoofedPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 13 }
|
|
juniAcctngIfOutPolicedOctets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 14 }
|
|
juniAcctngIfOutPolicedPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 15 }
|
|
juniAcctngIfOutSchedulerDropOctets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 16 }
|
|
juniAcctngIfOutSchedulerDropPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 17 }
|
|
juniAcctngIfLowerInterface OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 18 }
|
|
juniAcctngIfTimeOffset OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 19 }
|
|
juniAcctngifInMulticastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 20 }
|
|
juniAcctngifInBroadcastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 21 }
|
|
juniAcctngifOutMulticastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 22 }
|
|
juniAcctngifOutBroadcastPkts OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIf 23 }
|
|
|
|
juniAcctngSelectionSchemaIfStack OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 3 }
|
|
juniAcctngSelectionSchemaSystem OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 4 }
|
|
|
|
juniAcctngSelectionSchemaPolicy OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 5 }
|
|
|
|
juniAcctngSelectionSchemaIgmp OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 6 }
|
|
|
|
juniAcctngSelectionSchemaQos OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchema 7 }
|
|
|
|
juniAcctngGreenPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 1 }
|
|
juniAcctngUpperGreenPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 2 }
|
|
juniAcctngYellowPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 3 }
|
|
juniAcctngUpperYellowPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 4 }
|
|
juniAcctngRedPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 5 }
|
|
juniAcctngUpperRedPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 6 }
|
|
juniAcctngGreenBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 7 }
|
|
juniAcctngUpperGreenBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 8 }
|
|
juniAcctngYellowBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 9 }
|
|
juniAcctngUpperYellowBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 10 }
|
|
juniAcctngRedBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 11 }
|
|
juniAcctngUpperRedBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaPolicy 12 }
|
|
|
|
juniAcctngIgmpLowerIndex OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 1 }
|
|
juniAcctngIgmpRouterIndex OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 2 }
|
|
juniAcctngIgmpDestAddr OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 3 }
|
|
juniAcctngIgmpSourceIndex OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 4 }
|
|
juniAcctngIgmpMulticastGroup OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 5 }
|
|
juniAcctngIgmpLowerIgmpCommand OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 6 }
|
|
juniAcctngIgmpLowerTimeStamp OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaIgmp 7 }
|
|
|
|
juniAcctngParentShapingRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 1 }
|
|
juniAcctngParentSharedShapRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 2 }
|
|
juniAcctngParentChildWeight OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 3 }
|
|
juniAcctngQueueLength OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 4 }
|
|
juniAcctngForwardedRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 5 }
|
|
juniAcctngAggDropRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 6 }
|
|
juniAcctngForwardedPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 7 }
|
|
juniAcctngForwardedBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 8 }
|
|
juniAcctngGreenDropPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 9 }
|
|
juniAcctngGreenDropBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 10 }
|
|
juniAcctngYellowDropPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 11 }
|
|
juniAcctngYellowDropBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 12 }
|
|
juniAcctngRedDropPackets OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 13 }
|
|
juniAcctngRedDropBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 14 }
|
|
juniAcctngDropProfile OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 15 }
|
|
juniAcctngQueueProfile OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 16 }
|
|
juniAcctngSchedulerProfile OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 17 }
|
|
juniAcctngStatisticsProfile OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 18 }
|
|
juniAcctngShapingMode OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 19 }
|
|
juniAcctngShapingRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 20 }
|
|
juniAcctngBurst OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 21 }
|
|
juniAcctngAssuredRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 22 }
|
|
juniAcctngWeight OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 23 }
|
|
juniAcctngRedEnabled OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 24 }
|
|
juniAcctngSharedShapingMode OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 25 }
|
|
juniAcctngSharedShapingRate OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 26 }
|
|
juniAcctngByteAdjType OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 27 }
|
|
juniAcctngByteAdjBytes OBJECT IDENTIFIER
|
|
::= { juniAcctngSelectionSchemaQos 28 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniAcctngConformance OBJECT IDENTIFIER ::= { juniAcctngMIB 3 }
|
|
juniAcctngGroups OBJECT IDENTIFIER ::= { juniAcctngConformance 1 }
|
|
juniAcctngCompliances OBJECT IDENTIFIER ::= { juniAcctngConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniAcctngCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB. This statement became obsolete when the
|
|
juniAcctngSelectionSubtreeType object was deprecated."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup }
|
|
::= { juniAcctngCompliances 1 } -- JUNOSe 2.0
|
|
|
|
juniAcctngCompliance2 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB. This statement became obsolete when selection
|
|
policy name and type objects were added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup2 }
|
|
::= { juniAcctngCompliances 2 } -- JUNOSe 3.2
|
|
|
|
juniAcctngCompliance3 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB. This statement became obsolete when the
|
|
interface control table was modified."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup3 }
|
|
::= { juniAcctngCompliances 3 } -- JUNOSe 4.0
|
|
|
|
juniAcctngCompliance4 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB. This statement became obsolete when the
|
|
selection control table was modified."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup4 }
|
|
::= { juniAcctngCompliances 4 } -- JUNOSe 5.0
|
|
|
|
juniAcctngCompliance5 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup5 }
|
|
::= { juniAcctngCompliances 5 } -- JUNOSe x.0
|
|
|
|
juniAcctngCompliance6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for switches that implement the Juniper
|
|
Accounting Control MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniAcctngBasicGroup6 }
|
|
::= { juniAcctngCompliances 6 } -- JUNOSe 7.1
|
|
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
juniAcctngBasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngSelectionType,
|
|
juniAcctngSelectionMode,
|
|
juniAcctngSelectionSubtreeType,
|
|
juniAcctngSelectionMaxIfStackLevels,
|
|
juniAcctngSelectionIfStackRowStatus,
|
|
juniAcctngFileXferMode,
|
|
juniAcctngFileXferIndex,
|
|
juniAcctngFileXferSecondaryIndex,
|
|
juniAcctngObsInterfaceAdminStatus,
|
|
juniAcctngObsInterfaceOperStatus,
|
|
juniAcctngObsInterfaceRowStatus,
|
|
juniAcctngObsInterfaceAccntgFileIndex }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing control of the basic
|
|
collection of accounting data for connection-less networks. This group
|
|
became obsolete when juniAcctngSelectionSubtreeType was deprecated."
|
|
::= { juniAcctngGroups 1 }
|
|
|
|
juniAcctngBasicGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngSelectionType,
|
|
juniAcctngSelectionMode,
|
|
juniAcctngSelectionMaxIfStackLevels,
|
|
juniAcctngSelectionIfStackRowStatus,
|
|
juniAcctngFileXferMode,
|
|
juniAcctngFileXferIndex,
|
|
juniAcctngFileXferSecondaryIndex,
|
|
juniAcctngObsInterfaceAdminStatus,
|
|
juniAcctngObsInterfaceOperStatus,
|
|
juniAcctngObsInterfaceRowStatus,
|
|
juniAcctngObsInterfaceAccntgFileIndex }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing control of the basic
|
|
collection of accounting data for connection-less networks. This group
|
|
became obsolete when selection policy name and type objects were added."
|
|
::= { juniAcctngGroups 2 }
|
|
|
|
juniAcctngBasicGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngSelectionType,
|
|
juniAcctngSelectionMode,
|
|
juniAcctngSelectionMaxIfStackLevels,
|
|
juniAcctngSelectionPolicyName,
|
|
juniAcctngSelectionPolicyType,
|
|
juniAcctngSelectionIfStackRowStatus,
|
|
juniAcctngFileXferMode,
|
|
juniAcctngFileXferIndex,
|
|
juniAcctngFileXferSecondaryIndex,
|
|
juniAcctngObsInterfaceAdminStatus,
|
|
juniAcctngObsInterfaceOperStatus,
|
|
juniAcctngObsInterfaceRowStatus,
|
|
juniAcctngObsInterfaceAccntgFileIndex }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing control of the basic
|
|
collection of accounting data for connection-less networks. This group
|
|
became obsolete when the inteface control table was modified."
|
|
::= { juniAcctngGroups 3 }
|
|
|
|
juniAcctngDeprecatedGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngSelectionSubtreeType }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This group contains a deprecated object that is no longer recommended
|
|
but may still be supported on some implemtations for backward
|
|
compatibility."
|
|
::= { juniAcctngGroups 4 }
|
|
|
|
juniAcctngBasicGroup4 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngInterfaceDescrFormat,
|
|
juniAcctngInterfaceNumberingMode,
|
|
juniAcctngFileFormat,
|
|
juniAcctngSelectionType,
|
|
juniAcctngSelectionMode,
|
|
juniAcctngSelectionMaxIfStackLevels,
|
|
juniAcctngSelectionPolicyName,
|
|
juniAcctngSelectionPolicyType,
|
|
juniAcctngSelectionIfStackRowStatus,
|
|
juniAcctngFileXferMode,
|
|
juniAcctngFileXferIndex,
|
|
juniAcctngFileXferSecondaryIndex,
|
|
juniAcctngInterfaceAdminStatus,
|
|
juniAcctngInterfaceOperStatus,
|
|
juniAcctngInterfaceRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing control of the basic
|
|
collection of accounting data for connection-less networks. This group
|
|
became obsolete when the selection control table was modified."
|
|
::= { juniAcctngGroups 5 }
|
|
|
|
juniAcctngBasicGroup5 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngInterfaceDescrFormat,
|
|
juniAcctngInterfaceNumberingMode,
|
|
juniAcctngFileFormat,
|
|
juniAcctngSelectionType,
|
|
juniAcctngSelectionMode,
|
|
juniAcctngSelectionMaxIfStackLevels,
|
|
juniAcctngSelectionPolicyName,
|
|
juniAcctngSelectionPolicyType,
|
|
juniAcctngSelectionIfStackRowStatus,
|
|
juniAcctngSelectionIfCreateDeleteStats,
|
|
juniAcctngSelectionIfCreateDeleteStatsIfTypes,
|
|
juniAcctngFileXferMode,
|
|
juniAcctngFileXferIndex,
|
|
juniAcctngFileXferSecondaryIndex,
|
|
juniAcctngInterfaceAdminStatus,
|
|
juniAcctngInterfaceOperStatus,
|
|
juniAcctngInterfaceRowStatus,
|
|
juniAcctngIfFinalStatsXferStatsReceived,
|
|
juniAcctngIfFinalStatsXferStatsTransferred,
|
|
juniAcctngIfFinalStatsXferStatsDropped
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A collection of objects providing control of the basic collection of
|
|
accounting data for connection-less networks."
|
|
::= { juniAcctngGroups 6 }
|
|
|
|
juniAcctngBasicGroup6 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniAcctngVirtualRouterTableIndex,
|
|
juniAcctngVirtualRouterTableVRName,
|
|
juniAcctngVirtualRouterTableRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing control of the Virtual Router based
|
|
accounting."
|
|
::= { juniAcctngGroups 7 }
|
|
END
|