david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/nokia/ALCATEL-IND1-IPV6-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

1655 lines
49 KiB
Plaintext
Raw Blame History

ALCATEL-IND1-IPV6-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Unsigned32, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, PhysAddress, RowStatus, DisplayString, TimeStamp, TruthValue, DateAndTime
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Ipv6Address, Ipv6IfIndexOrZero
FROM IPV6-TC
softentIND1Ipv6
FROM ALCATEL-IND1-BASE
ipv6IfIndex, ipv6RouteEntry
FROM IPV6-MIB;
alcatelIND1IPv6MIB MODULE-IDENTITY
LAST-UPDATED "200807240000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary IPv6 MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2008 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200807240000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1Ipv6 1 }
alcatelIND1IPv6MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIB 1 }
AlaIPv6AddressPrefix ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"A data type for the 8 byte IPv6 prefixes for EUI-64 addresses"
SYNTAX OCTET STRING (SIZE (8))
--
-- Alcatel IPv6 Configuration
--
alaIPv6Config OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBObjects 1 }
alaIPv6ClearNeighbors OBJECT-TYPE
SYNTAX INTEGER { clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all non-static entries from the Neighbor table."
::= { alaIPv6Config 1 }
alaIPv6ClearTraffic OBJECT-TYPE
SYNTAX INTEGER { clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all IPv6 traffic counters."
::= { alaIPv6Config 2 }
alaIPv6ClearPMTUTable OBJECT-TYPE
SYNTAX INTEGER { clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the path MTU table."
::= { alaIPv6Config 3 }
alaIPv6PMTUMinLifetime OBJECT-TYPE
SYNTAX Unsigned32 (10..1440)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the minimum lifetime for entries in the
path MTU table."
DEFVAL { 60 }
::= { alaIPv6Config 4 }
alaIPv6NeighborStaleLifetime OBJECT-TYPE
SYNTAX Unsigned32 (5..2880)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the minimum lifetime for neighbor entries in the
stale state."
DEFVAL { 1440 }
::= { alaIPv6Config 5 }
alaIPv6GlobalID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global ID used in the creation of local IPv6 unicast
addresses (RFC 4193). An explicit value may be specified for
the global ID or this object may be set to all zero to have a
global ID be created based on the algorithm from the RFC."
::= { alaIPv6Config 6 }
--
-- Alcatel IPv6 Interface Table
--
alaIPv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of IPv6
interfaces.
The table is indexed by ipv6IfIndex. The value of
ipv6IfIndex shall be a four byte value in one of
the following formats:
0x0000vvvv - The interface for VLAN vvvv
0x0100tttt - The interface for tunnel tttt
0x02000001 - The IPv6 loopback interface
The loopback interface configuration cannot be
modified."
::= { alcatelIND1IPv6MIBObjects 2 }
alaIPv6InterfaceEntry OBJECT-TYPE
SYNTAX AlaIPv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 interface entry."
INDEX { ipv6IfIndex }
::= { alaIPv6InterfaceTable 1 }
AlaIPv6InterfaceEntry ::= SEQUENCE {
alaIPv6InterfaceRowStatus RowStatus,
alaIPv6InterfaceDescription DisplayString,
alaIPv6InterfaceMtu Unsigned32,
alaIPv6InterfaceType INTEGER,
alaIPv6InterfaceAdminStatus INTEGER,
alaIPv6InterfaceSendRouterAdvertisements INTEGER,
alaIPv6InterfaceMaxRtrAdvInterval Unsigned32,
alaIPv6InterfaceAdvManagedFlag TruthValue,
alaIPv6InterfaceAdvOtherConfigFlag TruthValue,
alaIPv6InterfaceAdvReachableTime Unsigned32,
alaIPv6InterfaceAdvRetransTimer Unsigned32,
alaIPv6InterfaceAdvDefaultLifetime Unsigned32,
alaIPv6InterfaceName DisplayString,
alaIPv6InterfaceAdvSendMtu TruthValue,
alaIPv6InterfaceReachableTime Unsigned32,
alaIPv6InterfaceBaseReachableTime Unsigned32,
alaIPv6InterfaceMinRtrAdvInterval Unsigned32,
alaIPv6InterfaceClockSkew Unsigned32,
alaIPv6InterfaceRetransTimer Unsigned32,
alaIPv6InterfaceDADTransmits Unsigned32,
alaIPv6InterfaceAdvHopLimit Unsigned32
}
alaIPv6InterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
interfaces."
::= { alaIPv6InterfaceEntry 1 }
alaIPv6InterfaceDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 interface's description."
::= { alaIPv6InterfaceEntry 2 }
alaIPv6InterfaceMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 interface's maximum transmission unit."
::= { alaIPv6InterfaceEntry 3 }
alaIPv6InterfaceType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
vlan(2),
tunnel(3),
loopback(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface type."
::= { alaIPv6InterfaceEntry 4 }
alaIPv6InterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface administrative status."
::= { alaIPv6InterfaceEntry 5 }
alaIPv6InterfaceSendRouterAdvertisements OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify whether the router sends periodic router
advertisements and responds to router solicitations
on the interface.
The default value for most interfaces is enable(1).
Some interface types (e.g. 6to4 tunnel) cannot send
router advertisements so the default (and only)
value for those interfaces is disable(2)."
DEFVAL {enable}
::= { alaIPv6InterfaceEntry 6 }
alaIPv6InterfaceMaxRtrAdvInterval OBJECT-TYPE
SYNTAX Unsigned32 (4..1800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum time allowed between sending unsolicited
multicast router advertisements from the interface."
DEFVAL {600}
::= { alaIPv6InterfaceEntry 7 }
alaIPv6InterfaceAdvManagedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TRUE/FALSE value to be placed in the 'Managed
address configuration' flag field in router advertisements."
DEFVAL { false }
::= { alaIPv6InterfaceEntry 8 }
alaIPv6InterfaceAdvOtherConfigFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TRUE/FALSE value to be placed in the 'Other stateful
configuration' flag field in router advertisements."
DEFVAL { false }
::= { alaIPv6InterfaceEntry 9 }
alaIPv6InterfaceAdvReachableTime OBJECT-TYPE
SYNTAX Unsigned32 (0..3600000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Reachable Time field in
the router advertisements sent over this interface. The
value zero means unspecified by this router."
DEFVAL {0}
::= { alaIPv6InterfaceEntry 10 }
alaIPv6InterfaceAdvRetransTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Retrans Timer field in
the router advertisements sent over this interface. The
value zero means unspecified by this router."
DEFVAL {0}
::= { alaIPv6InterfaceEntry 11 }
alaIPv6InterfaceAdvDefaultLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0..9000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Router Lifetime field in
the router advertisements sent over this interface.
The value MUST be either zero, 1, or between
alaIPv6InterfaceMaxRtrAdvInterval and 9000 seconds.
The special value zero indicates that the router is not
to be used as a default router.
The special value 1 indicates that this object's true
value should be computed using the formula
3 * alaIPv6InterfaceMaxRtrAdvInterval."
DEFVAL {1}
::= { alaIPv6InterfaceEntry 12 }
alaIPv6InterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mandatory user-assigned name for the interface.
Since the loopback interface is created without user
interaction, the name 'loopback' will be automatically
assigned."
::= { alaIPv6InterfaceEntry 13 }
alaIPv6InterfaceAdvSendMtu OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TRUE/FALSE value that determines whether the MTU
option is sent in Router Advertisements."
DEFVAL { false }
::= { alaIPv6InterfaceEntry 14 }
alaIPv6InterfaceReachableTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the absence of any reachability notification, the
amount of time a neighbor reached via this interface
will remain in the reachable state before transitioning
to the stale state. Computed to be between .5 and 1.5
times the alaIPv6InterfaceBaseReachableTime."
::= { alaIPv6InterfaceEntry 15 }
alaIPv6InterfaceBaseReachableTime OBJECT-TYPE
SYNTAX Unsigned32 (10..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The base value used to compute the reachable time
for neighbors reached via this interface. See
alaIPv6InterfaceReachableTime above."
::= { alaIPv6InterfaceEntry 16 }
alaIPv6InterfaceMinRtrAdvInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..1350)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time allowed between sending unsolicited
multicast router advertisements from the interface.
The time must be a minimum of 3 seconds and no more than
.75 times the value of alaIPv6InterfaceMaxRtrAdvInterval.
Setting this object to the special value of 0 indicates
that the minimum interval should be automatically
recalculated using the formula .33 times the value of
alaIPv6InterfaceMaxRtrAdvInterval."
DEFVAL {0}
::= { alaIPv6InterfaceEntry 17 }
alaIPv6InterfaceClockSkew OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Router Advertisement decrementing timers must be consistent
in all Advertisements on the link. The clock skew accounts
for link propogation delays and poorly synchronized clocks."
DEFVAL { 600 }
::= { alaIPv6InterfaceEntry 18 }
alaIPv6InterfaceRetransTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..30000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time to wait before retransmitting a Neighbor
Solicitation during neighbor discovery."
DEFVAL { 1000 }
::= { alaIPv6InterfaceEntry 19 }
alaIPv6InterfaceDADTransmits OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of Neighbor Solicitations to send during Duplicate
Address Detection."
DEFVAL { 1 }
::= { alaIPv6InterfaceEntry 20 }
alaIPv6InterfaceAdvHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value placed in the current hop limit field of router
advertisements."
DEFVAL { 64 }
::= { alaIPv6InterfaceEntry 21 }
--
-- Alcatel IPv6 Tunnel Configuration
--
alaIPv6TunnelConfig OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBObjects 3 }
alaIPv6ConfigTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6ConfigTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for IPv6 configured tunnels. This table contains the
tunnel-specific information extending the corresponding
tunnel interface entry in alaIPv6InterfaceTable."
::= { alaIPv6TunnelConfig 2 }
alaIPv6ConfigTunnelEntry OBJECT-TYPE
SYNTAX AlaIPv6ConfigTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry contains the objects for an IPv6 configured tunnel."
INDEX { ipv6IfIndex }
::= { alaIPv6ConfigTunnelTable 1 }
AlaIPv6ConfigTunnelEntry ::= SEQUENCE {
alaIPv6ConfigTunnelV4Source IpAddress,
alaIPv6ConfigTunnelV4Dest IpAddress
}
alaIPv6ConfigTunnelV4Source OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IPv4 address for the tunnel."
::= { alaIPv6ConfigTunnelEntry 1 }
alaIPv6ConfigTunnelV4Dest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IPv4 address for the tunnel."
::= { alaIPv6ConfigTunnelEntry 2 }
--
-- Alcatel IPv6 Interface Address Table
--
alaIPv6InterfaceAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6InterfaceAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of IPv6
addresses assigned to interfaces."
::= { alcatelIND1IPv6MIBObjects 4 }
alaIPv6InterfaceAddressEntry OBJECT-TYPE
SYNTAX AlaIPv6InterfaceAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 interface address entry.
The same link-local address may be assigned to
multiple interfaces. A global address may only
be assigned to a single interface."
INDEX { ipv6IfIndex, alaIPv6InterfaceAddress }
::= { alaIPv6InterfaceAddressTable 1 }
AlaIPv6InterfaceAddressEntry ::= SEQUENCE {
alaIPv6InterfaceAddressRowStatus RowStatus,
alaIPv6InterfaceAddress Ipv6Address,
alaIPv6InterfaceAddressPrefixLength Unsigned32,
alaIPv6InterfaceAddressAnycastFlag TruthValue,
alaIPv6InterfaceAddressDADStatus INTEGER
}
alaIPv6InterfaceAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
interface addresses."
::= { alaIPv6InterfaceAddressEntry 1 }
alaIPv6InterfaceAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 address (or prefix for EUI-64 addresses)
assigned to the interface."
::= { alaIPv6InterfaceAddressEntry 2 }
alaIPv6InterfaceAddressPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (3..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of bits that are significant in the IPv6
address' prefix."
::= { alaIPv6InterfaceAddressEntry 3 }
alaIPv6InterfaceAddressAnycastFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this
address is an anycast address and the value
'false(2)' otherwise."
DEFVAL { false }
::= { alaIPv6InterfaceAddressEntry 4 }
alaIPv6InterfaceAddressDADStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
pending(1),
duplicate(2),
passed(3),
check(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of duplicate address detection for this address.
The only value that may be set via SNMP is 'check' when the
current status is 'duplicate'. In such cases, duplicate
address detection will be performed again for the address."
::= { alaIPv6InterfaceAddressEntry 5 }
--
-- Alcatel IPv6 EUI64 Interface Address Table
--
alaIPv6InterfaceEUI64AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6InterfaceEUI64AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of IPv6
addresses formed by appending an EUI-64 interface
identifier to the specified prefix.
This table is mainly used for the creation of such
addresses. After creation they can be managed
via the alaIPv6InterfaceAddressTable."
::= { alcatelIND1IPv6MIBObjects 5 }
alaIPv6InterfaceEUI64AddressEntry OBJECT-TYPE
SYNTAX AlaIPv6InterfaceEUI64AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 interface EUI-64 address entry."
INDEX { ipv6IfIndex,
alaIPv6InterfaceEUI64AddressPrefix }
::= { alaIPv6InterfaceEUI64AddressTable 1 }
AlaIPv6InterfaceEUI64AddressEntry ::= SEQUENCE {
alaIPv6InterfaceEUI64AddressRowStatus RowStatus,
alaIPv6InterfaceEUI64AddressPrefix AlaIPv6AddressPrefix,
alaIPv6InterfaceEUI64AddressPrefixLength Unsigned32,
alaIPv6InterfaceEUI64AddressIdentifier OCTET STRING
}
alaIPv6InterfaceEUI64AddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
interface EUI-64 addresses."
::= { alaIPv6InterfaceEUI64AddressEntry 1 }
alaIPv6InterfaceEUI64AddressPrefix OBJECT-TYPE
SYNTAX AlaIPv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix for the EUI-64 address."
::= { alaIPv6InterfaceEUI64AddressEntry 2 }
alaIPv6InterfaceEUI64AddressPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (3..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of bits that are significant in the IPv6
address' prefix."
::= { alaIPv6InterfaceEUI64AddressEntry 3 }
alaIPv6InterfaceEUI64AddressIdentifier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's EUI-64 identifier which is combined
with the prefix to form the IPv6 address."
::= { alaIPv6InterfaceEUI64AddressEntry 4 }
--
-- Alcatel IPv6 Neighbor Table.
--
alaIPv6NeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 neighbor table. Much of this information is
available in the RFC-2465 ipv6NetToMediaTable. However,
that table does not allow the static configuration of
neighbor entries (all objects except for
ipv6NetToMediaValid are read-only)."
::= { alcatelIND1IPv6MIBObjects 6 }
alaIPv6NeighborEntry OBJECT-TYPE
SYNTAX AlaIPv6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IPv6 address to `physical'
address equivalence (a neighbor)."
INDEX { ipv6IfIndex, alaIPv6NeighborNetAddress }
::= { alaIPv6NeighborTable 1 }
AlaIPv6NeighborEntry ::= SEQUENCE {
alaIPv6NeighborNetAddress Ipv6Address,
alaIPv6NeighborPhysAddress PhysAddress,
alaIPv6NeighborSlot Unsigned32,
alaIPv6NeighborPort Unsigned32,
alaIPv6NeighborType INTEGER,
alaIPv6NeighborState INTEGER,
alaIPv6NeighborLastUpdated TimeStamp,
alaIPv6NeighborRowStatus RowStatus,
alaIPv6NeighborLifetime Unsigned32,
alaIPv6NeighborReachability INTEGER
}
alaIPv6NeighborNetAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The neighbor's IPv6 Address."
::= { alaIPv6NeighborEntry 1 }
alaIPv6NeighborPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The neighbor's media-dependent `physical' address."
::= { alaIPv6NeighborEntry 2 }
alaIPv6NeighborSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The slot used to reach the neighbor. When creating a static neighbor
the slot must be specified. On read, a value of zero indicates
the slot is not known/not applicable."
::= { alaIPv6NeighborEntry 3 }
alaIPv6NeighborPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port used to reach the neighbor. When creating a static neighbor
the port must be specified. On read, a value of zero indicates the
port is not known/not applicable."
::= { alaIPv6NeighborEntry 4 }
alaIPv6NeighborType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
dynamic(2), -- dynamically resolved
static(3), -- statically configured
local(4) -- local interface
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the mapping. The 'dynamic(2)' type
indicates that the IPv6 address to physical
addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery
protocol. The static(3)' types indicates that
the mapping has been statically configured.
The local(4) indicates that the mapping is
provided for an entity's own interface address.
All entries added via this table will have the
type static(3) and only static entries may be
removed via this table."
::= { alaIPv6NeighborEntry 5 }
alaIPv6NeighborState OBJECT-TYPE
SYNTAX INTEGER {
reachable(1), -- confirmed reachability
stale(2), -- unconfirmed reachability
delay(3), -- waiting for reachability
-- confirmation before entering
-- the probe state
probe(4), -- actively probing
invalid(5), -- an invalidated mapping
unknown(6) -- state can not be determined
-- for some reason.
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Neighbor Unreachability Detection state
for the interface when the address mapping in
this entry is used."
::= { alaIPv6NeighborEntry 6 }
alaIPv6NeighborLastUpdated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry
was last updated. If this entry was updated prior
to the last re-initialization of the local network
management subsystem, then this object contains
a zero value."
::= { alaIPv6NeighborEntry 7 }
alaIPv6NeighborRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of static
entries in the neighbor table."
::= { alaIPv6NeighborEntry 8 }
alaIPv6NeighborLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining time the neighbor will stay in its current
state. External events may cause a state change before
the expiry of this lifetime. A value of zero indicates
the neighbor will remain in its current state indefinitely."
::= { alaIPv6NeighborEntry 9 }
alaIPv6NeighborReachability OBJECT-TYPE
SYNTAX INTEGER {
confirmed(1), -- confirmed reachability
unconfirmed(2), -- unconfirmed reachability
incomplete(3) -- detection incomplete
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reachability status of the neighbor."
::= { alaIPv6NeighborEntry 10 }
--
-- Alcatel IPv6 Static Routes Table
--
alaIPv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table has been superseded by alaIprmV6StaticRouteTable in
ALCATEL-IND1-IPRMV6-MIB.
Table allowing the creation and removal of static
IPv6 routes."
::= { alcatelIND1IPv6MIBObjects 7 }
alaIPv6StaticRouteEntry OBJECT-TYPE
SYNTAX AlaIPv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A static route entry."
INDEX { alaIPv6StaticRouteDest,
alaIPv6StaticRoutePfxLength }
::= { alaIPv6StaticRouteTable 1 }
AlaIPv6StaticRouteEntry ::= SEQUENCE {
alaIPv6StaticRouteDest Ipv6Address,
alaIPv6StaticRoutePfxLength INTEGER,
alaIPv6StaticRouteIfIndex Ipv6IfIndexOrZero,
alaIPv6StaticRouteNextHop Ipv6Address,
alaIPv6StaticRouteMetric Unsigned32,
alaIPv6StaticRouteRowStatus RowStatus
}
alaIPv6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The destination IPv6 address of this static
route. This object may not take a Multicast
address value."
::= { alaIPv6StaticRouteEntry 1 }
alaIPv6StaticRoutePfxLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { alaIPv6StaticRouteEntry 2 }
alaIPv6StaticRouteIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"If the next hop address is a link-local
address, this is the ipv6IfIndex value of the
interface over which the destination is reached.
For all other next hop address types the value
is zero."
DEFVAL { 0 }
::= { alaIPv6StaticRouteEntry 3 }
alaIPv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The IPv6 address of the next hop towards the
destination."
::= { alaIPv6StaticRouteEntry 4 }
alaIPv6StaticRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The routing metric for this route. The lower the
value, the higher the priority for the static
route."
DEFVAL { 1 }
::= { alaIPv6StaticRouteEntry 5 }
alaIPv6StaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Used to control the addition and removal of static
routes."
::= { alaIPv6StaticRouteEntry 6 }
--
-- Local host name to IPv6 address table
--
alaIPv6HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Local table mapping host names to IPv6 addresses. This provides
the equivalent of /etc/hosts for IPv6."
::= { alcatelIND1IPv6MIBObjects 8 }
alaIPv6HostEntry OBJECT-TYPE
SYNTAX AlaIPv6HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry maps a host name to an IPv6 address."
INDEX { alaIPv6HostName, alaIPv6HostAddress }
::= { alaIPv6HostTable 1 }
AlaIPv6HostEntry ::= SEQUENCE {
alaIPv6HostName DisplayString,
alaIPv6HostAddress Ipv6Address,
alaIPv6HostRowStatus RowStatus
}
alaIPv6HostName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A host name to be mapped to an IPv6 address."
::= { alaIPv6HostEntry 1 }
alaIPv6HostAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address mapped to the host name."
::= { alaIPv6HostEntry 2 }
alaIPv6HostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows host name/IPv6 address mappings to be created and
deleted in this table."
::= { alaIPv6HostEntry 3 }
--
-- Alcatel IPv6 Interface Prefix Table for Router Advertisements
--
alaIPv6InterfacePrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6InterfacePrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of IPv6
prefixes to be placed in Prefix Information
options in Router Advertisement messages sent
from the interface.
Default: all prefixes that the router advertises
via routing protocols as being on-link for the
interface from which the advertisement is sent.
The link-local prefix is not included in the
list of advertised prefixes."
::= { alcatelIND1IPv6MIBObjects 9 }
alaIPv6InterfacePrefixEntry OBJECT-TYPE
SYNTAX AlaIPv6InterfacePrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 interface prefix entry."
INDEX { ipv6IfIndex, alaIPv6InterfacePrefix,
alaIPv6InterfacePrefixLength }
::= { alaIPv6InterfacePrefixTable 1 }
AlaIPv6InterfacePrefixEntry ::= SEQUENCE {
alaIPv6InterfacePrefixRowStatus RowStatus,
alaIPv6InterfacePrefix Ipv6Address,
alaIPv6InterfacePrefixLength Unsigned32,
alaIPv6InterfacePrefixValidLifetime Unsigned32,
alaIPv6InterfacePrefixOnLinkFlag TruthValue,
alaIPv6InterfacePrefixPreferredLifetime Unsigned32,
alaIPv6InterfacePrefixAutonomousFlag TruthValue,
alaIPv6InterfacePrefixSource INTEGER,
alaIPv6InterfacePrefixValidLifetimeDecrement TruthValue,
alaIPv6InterfacePrefixValidLifetimeExpire DateAndTime,
alaIPv6InterfacePrefixPreferredLifetimeDecrement TruthValue,
alaIPv6InterfacePrefixPreferredLifetimeExpire DateAndTime
}
alaIPv6InterfacePrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
interface prefixes for Router ADvertisement messages."
::= { alaIPv6InterfacePrefixEntry 1 }
alaIPv6InterfacePrefix OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix associated with this interface."
::= { alaIPv6InterfacePrefixEntry 2 }
alaIPv6InterfacePrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix in bits."
::= { alaIPv6InterfacePrefixEntry 3 }
alaIPv6InterfacePrefixValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Valid
Lifetime in the Prefix Information
option, in seconds. The designated value
of 4,294,967,295 represents infinity."
DEFVAL { 2592000 }
::= { alaIPv6InterfacePrefixEntry 4 }
alaIPv6InterfacePrefixOnLinkFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the on-link
flag (L-bit) field in the Prefix
Information option."
DEFVAL { true }
::= { alaIPv6InterfacePrefixEntry 5 }
alaIPv6InterfacePrefixPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Preferred
Lifetime in the Prefix Information
option, in seconds. The designated value
of 4,294,967,295 represents infinity."
DEFVAL { 604800 }
::= { alaIPv6InterfacePrefixEntry 6 }
alaIPv6InterfacePrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value to be placed in the Autonomous
Flag field in the Prefix Information
option."
DEFVAL { true }
::= { alaIPv6InterfacePrefixEntry 7 }
alaIPv6InterfacePrefixSource OBJECT-TYPE
SYNTAX INTEGER {
other(1),
dynamic(2),
configured(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of this prefix. If configured by
management the value will be configured(3). If
determined automatically from IPv6 interface
address configuration the value will be
dynamic(2)."
::= { alaIPv6InterfacePrefixEntry 8 }
alaIPv6InterfacePrefixValidLifetimeDecrement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true, use the remaining seconds derived from
alaIPv6InterfacePrefixValidLifetime in the
Router Advertisement. If false, use the static value
alaIPv6InterfacePrefixValidLifetime."
DEFVAL { false }
::= { alaIPv6InterfacePrefixEntry 9 }
alaIPv6InterfacePrefixValidLifetimeExpire OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The date and time when the advertised prefix Valid Lifetime
expires. To use this value,
alaIPv6InterfaceValidLifetimeDecrement must be set to true."
::= { alaIPv6InterfacePrefixEntry 10 }
alaIPv6InterfacePrefixPreferredLifetimeDecrement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true, use the remaining seconds derived from
alaIPv6InterfacePrefixPreferredLifetime in the
Router Advertisement. If false, use the static value
alaIPv6InterfacePrefixPreferredLifetime."
DEFVAL { false }
::= { alaIPv6InterfacePrefixEntry 11 }
alaIPv6InterfacePrefixPreferredLifetimeExpire OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The date and time when the advertised prefix Preferred Lifetime
expires. To use this value,
alaIPv6InterfacePreferredLifetimeDecrement must be set to true."
::= { alaIPv6InterfacePrefixEntry 12 }
--
-- Alcatel IPv6 path MTU table
--
alaIPv6PMTUTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6PMTUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the retrieval of the known IPv6
path MTU value."
::= { alcatelIND1IPv6MIBObjects 10 }
alaIPv6PMTUEntry OBJECT-TYPE
SYNTAX AlaIPv6PMTUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 path MTU entry."
INDEX { alaIPv6PMTUDest }
::= { alaIPv6PMTUTable 1 }
AlaIPv6PMTUEntry ::= SEQUENCE {
alaIPv6PMTUDest Ipv6Address,
alaIPv6PMTU Unsigned32,
alaIPv6PMTUExpire Unsigned32,
alaIPv6PMTUHits Counter32,
alaIPv6PMTUUpdates Counter32
}
alaIPv6PMTUDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination address of the IPv6 path."
::= { alaIPv6PMTUEntry 1 }
alaIPv6PMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path's MTU."
::= { alaIPv6PMTUEntry 2 }
alaIPv6PMTUExpire OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before the PMTU entry is
removed from the table."
::= { alaIPv6PMTUEntry 3 }
alaIPv6PMTUHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the path MTU entry has been used."
::= { alaIPv6PMTUEntry 4 }
alaIPv6PMTUUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the path MTU entry has been updated."
::= { alaIPv6PMTUEntry 5 }
--
-- Alcatel IPv6 route flags table
--
alaIPv6RouteFlagsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6RouteFlagsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the retrieval of the flags for
IPv6 route entries."
::= { alcatelIND1IPv6MIBObjects 11 }
alaIPv6RouteFlagsEntry OBJECT-TYPE
SYNTAX AlaIPv6RouteFlagsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPV6 route flags entry."
AUGMENTS { ipv6RouteEntry }
::= { alaIPv6RouteFlagsTable 1 }
AlaIPv6RouteFlagsEntry ::= SEQUENCE {
alaIPv6RouteFlagsUp TruthValue,
alaIPv6RouteFlagsGateway TruthValue,
alaIPv6RouteFlagsHost TruthValue,
alaIPv6RouteFlagsStatic TruthValue,
alaIPv6RouteFlagsCloneable TruthValue,
alaIPv6RouteFlagsDiscard TruthValue,
alaIPv6RouteFlagsECMP TruthValue
}
alaIPv6RouteFlagsUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Up (U) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 1 }
alaIPv6RouteFlagsGateway OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Gateway (G) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 2 }
alaIPv6RouteFlagsHost OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Host (H) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 3 }
alaIPv6RouteFlagsStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Static (S) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 4 }
alaIPv6RouteFlagsCloneable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Cloneable (C) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 5 }
alaIPv6RouteFlagsDiscard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Discard/Blackhole (B) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 6 }
alaIPv6RouteFlagsECMP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the ECMP (E) flag is set on the route."
::= { alaIPv6RouteFlagsEntry 7 }
--
-- Alcatel IPv6 Local Unicast Address Table
--
alaIPv6LocalUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIPv6LocalUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of local IPv6
unicast addresses (RFC 4193) on an interface."
::= { alcatelIND1IPv6MIBObjects 13 }
alaIPv6LocalUnicastEntry OBJECT-TYPE
SYNTAX AlaIPv6LocalUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An local unicast IPv6 address entry."
INDEX { ipv6IfIndex,
alaIPv6LocalUnicastGlobalID,
alaIPv6LocalUnicastSubnetID,
alaIPv6LocalUnicastInterfaceID }
::= { alaIPv6LocalUnicastTable 1 }
AlaIPv6LocalUnicastEntry ::= SEQUENCE {
alaIPv6LocalUnicastGlobalID OCTET STRING,
alaIPv6LocalUnicastSubnetID OCTET STRING,
alaIPv6LocalUnicastInterfaceID OCTET STRING,
alaIPv6LocalUnicastPrefixLength Unsigned32,
alaIPv6LocalUnicastEUI64 TruthValue,
alaIPv6LocalUnicastRowStatus RowStatus
}
alaIPv6LocalUnicastGlobalID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The global ID portion of the local IPv6 unicast address. Leave
the value as all zero when adding a new addres to use the
alaIPv6GlobalID value."
::= { alaIPv6LocalUnicastEntry 1 }
alaIPv6LocalUnicastSubnetID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet ID portion of the local IPv6 unicast address."
::= { alaIPv6LocalUnicastEntry 2 }
alaIPv6LocalUnicastInterfaceID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identifier portion of the local IPv6 unicast
address. When alaIPv6LocalUnicastEUI64 is true(1) the value
of this object should be all zero."
::= { alaIPv6LocalUnicastEntry 3 }
alaIPv6LocalUnicastPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (64..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of bits that are significant in the IPv6
address prefix."
DEFVAL { 64 }
::= { alaIPv6LocalUnicastEntry 4 }
alaIPv6LocalUnicastEUI64 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true(1) the interface identifier is formed from an
automatically generated EUI-64 value."
DEFVAL { false }
::= { alaIPv6LocalUnicastEntry 5 }
alaIPv6LocalUnicastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of local IPv6
unicast addresses."
::= { alaIPv6LocalUnicastEntry 6 }
--
-- conformance information
--
alcatelIND1IPv6MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIB 2 }
alcatelIND1IPv6MIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBConformance 1 }
alcatelIND1IPv6MIBGroups OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBConformance 2 }
alaIPv6Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for switches with Alcatel IPv6 stack and
implementing ALCATEL-IND1-IPV6-MIB."
MODULE
MANDATORY-GROUPS { alaIPv6TunnelConfigGroup,
alaIPv6ConfigGroup,
alaIPv6NeighborGroup,
alaIPv6StaticRouteGroup,
alaIPv6InterfaceGroup,
alaIPv6InterfaceAddressGroup,
alaIPv6InterfaceEUI64AddressGroup,
alaIPv6InterfacePrefixGroup,
alaIPv6PMTUGroup,
alaIPv6RouteFlagsGroup,
alaIPv6LocalUnicastGroup
}
::= { alcatelIND1IPv6MIBCompliances 1 }
--
-- units of conformance
--
alaIPv6TunnelConfigGroup OBJECT-GROUP
OBJECTS {
alaIPv6ConfigTunnelV4Source,
alaIPv6ConfigTunnelV4Dest
}
STATUS current
DESCRIPTION
"A collection of objects to support management of Alcatel IPv6
tunneling."
::= { alcatelIND1IPv6MIBGroups 1 }
alaIPv6ConfigGroup OBJECT-GROUP
OBJECTS {
alaIPv6ClearNeighbors,
alaIPv6ClearTraffic,
alaIPv6ClearPMTUTable,
alaIPv6PMTUMinLifetime,
alaIPv6NeighborStaleLifetime,
alaIPv6GlobalID
}
STATUS current
DESCRIPTION
"A collection of objects to support management of configuration
parameters of Alcatel IPv6 stack."
::= { alcatelIND1IPv6MIBGroups 2 }
alaIPv6NeighborGroup OBJECT-GROUP
OBJECTS {
-- alaIPv6NeighborNetAddress,
alaIPv6NeighborPhysAddress,
alaIPv6NeighborSlot,
alaIPv6NeighborPort,
alaIPv6NeighborType,
-- alaIPv6NeighborState,
alaIPv6NeighborLastUpdated,
alaIPv6NeighborRowStatus,
alaIPv6NeighborLifetime,
alaIPv6NeighborReachability
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
neighbors."
::= { alcatelIND1IPv6MIBGroups 3 }
alaIPv6StaticRouteGroup OBJECT-GROUP
OBJECTS {
-- alaIPv6StaticRouteDest,
-- alaIPv6StaticRoutePfxLength,
alaIPv6StaticRouteIfIndex,
alaIPv6StaticRouteNextHop,
alaIPv6StaticRouteMetric,
alaIPv6StaticRouteRowStatus
}
STATUS obsolete
DESCRIPTION
"A collection of objects to support management of IPv6
static routes."
::= { alcatelIND1IPv6MIBGroups 4 }
alaIPv6InterfaceGroup OBJECT-GROUP
OBJECTS {
alaIPv6InterfaceRowStatus,
alaIPv6InterfaceDescription,
alaIPv6InterfaceMtu,
alaIPv6InterfaceType,
alaIPv6InterfaceAdminStatus,
alaIPv6InterfaceSendRouterAdvertisements,
alaIPv6InterfaceMaxRtrAdvInterval,
alaIPv6InterfaceAdvManagedFlag,
alaIPv6InterfaceAdvOtherConfigFlag,
alaIPv6InterfaceAdvReachableTime,
alaIPv6InterfaceAdvRetransTimer,
alaIPv6InterfaceAdvDefaultLifetime,
alaIPv6InterfaceName,
alaIPv6InterfaceReachableTime,
alaIPv6InterfaceBaseReachableTime,
alaIPv6InterfaceMinRtrAdvInterval,
alaIPv6InterfaceClockSkew,
alaIPv6InterfaceRetransTimer,
alaIPv6InterfaceDADTransmits,
alaIPv6InterfaceAdvHopLimit
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
interfaces."
::= { alcatelIND1IPv6MIBGroups 5 }
alaIPv6InterfaceAddressGroup OBJECT-GROUP
OBJECTS {
alaIPv6InterfaceAddressRowStatus,
-- alaIPv6InterfaceAddress,
alaIPv6InterfaceAddressPrefixLength,
alaIPv6InterfaceAddressAnycastFlag
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
addresses assigned to interfaces."
::= { alcatelIND1IPv6MIBGroups 6 }
alaIPv6InterfaceEUI64AddressGroup OBJECT-GROUP
OBJECTS {
alaIPv6InterfaceEUI64AddressRowStatus,
-- alaIPv6InterfaceEUI64AddressPrefix,
alaIPv6InterfaceEUI64AddressPrefixLength,
alaIPv6InterfaceEUI64AddressIdentifier
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
EUI-64 addresses assigned to interfaces."
::= { alcatelIND1IPv6MIBGroups 7 }
alaIPv6InterfacePrefixGroup OBJECT-GROUP
OBJECTS {
alaIPv6InterfacePrefixRowStatus,
-- alaIPv6InterfacePrefix,
-- alaIPv6InterfacePrefixLength,
alaIPv6InterfacePrefixValidLifetime,
alaIPv6InterfacePrefixOnLinkFlag,
alaIPv6InterfacePrefixPreferredLifetime,
alaIPv6InterfacePrefixAutonomousFlag,
alaIPv6InterfacePrefixSource,
alaIPv6InterfacePrefixValidLifetimeDecrement,
alaIPv6InterfacePrefixValidLifetimeExpire,
alaIPv6InterfacePrefixPreferredLifetimeDecrement,
alaIPv6InterfacePrefixPreferredLifetimeExpire
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
prefixes assigned to interfaces."
::= { alcatelIND1IPv6MIBGroups 8 }
alaIPv6PMTUGroup OBJECT-GROUP
OBJECTS {
-- alaIPv6PMTUDest,
alaIPv6PMTU,
alaIPv6PMTUExpire,
alaIPv6PMTUHits,
alaIPv6PMTUUpdates
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
path MTUs."
::= { alcatelIND1IPv6MIBGroups 9 }
alaIPv6RouteFlagsGroup OBJECT-GROUP
OBJECTS {
alaIPv6RouteFlagsUp,
alaIPv6RouteFlagsGateway,
alaIPv6RouteFlagsHost,
alaIPv6RouteFlagsStatic,
alaIPv6RouteFlagsCloneable,
alaIPv6RouteFlagsDiscard,
alaIPv6RouteFlagsECMP
}
STATUS current
DESCRIPTION
"A collection of objects to support management of IPv6
route flags."
::= { alcatelIND1IPv6MIBGroups 10 }
alaIPv6LocalUnicastGroup OBJECT-GROUP
OBJECTS {
-- alaIPv6LocalUnicastGlobalID,
-- alaIPv6LocalUnicastSubnetID,
-- alaIPv6LocalUnicastInterfaceID,
alaIPv6LocalUnicastPrefixLength,
alaIPv6LocalUnicastEUI64,
alaIPv6LocalUnicastRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support management of
local IPv6 unicast addresses (RFC 4193)."
::= { alcatelIND1IPv6MIBGroups 11 }
--
-- Traps in case if Maximum hardware table entries is reached
--
alcatelIND1IPv6Traps OBJECT IDENTIFIER ::= { alcatelIND1IPv6MIBObjects 12}
alcatelIND1IPv6TrapsRoot OBJECT IDENTIFIER ::= { alcatelIND1IPv6Traps 0}
ndpMaxLimitReached NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This notification is generated when hardware table has reached supported
Maximum entries. OS6400 will not generate new ARP request for new nexthops"
::= {alcatelIND1IPv6TrapsRoot 1}
END
Reference in New Issue View Git Blame Copy Permalink