mibs/MIBS/nokia/ALCATEL-IND1-VRRP3-MIB
2023-12-05 12:25:34 +01:00

845 lines
27 KiB
Plaintext

ALCATEL-IND1-VRRP3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Counter32,
Integer32 FROM SNMPv2-SMI
RowStatus, MacAddress,
TruthValue, TimeStamp FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1Vrrp FROM ALCATEL-IND1-BASE
ifIndex FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
VrId FROM VRRP-MIB;
alcatelIND1VRRP3MIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Proprietary VRRP MIB definitions for simultaneous
support of IPv4 and IPv6 protocols.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z" -- 02 April 2007
DESCRIPTION "The latest version of this MIB Module."
::= { softentIND1Vrrp 2 }
--
-- VRRP MIB Groups
--
alaVrrp3Operations OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 1 }
alaVrrp3Statistics OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 2 }
alaVrrp3Conformance OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 3 }
--
-- Start of MIB objects
--
alaVrrp3NotificationCntl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the VRRP-enabled router will generate
SNMP traps for events defined in this MIB. 'Enabled'
results in SNMP traps; 'disabled', no traps are sent."
DEFVAL { enabled }
::= { alaVrrp3Operations 1 }
--
-- VRRP Operations Table
--
alaVrrp3OperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVrrp3OperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unified Operations table for a VRRP router which
consists of a sequence (i.e., one or more conceptual
rows) of 'alaVrrp3OperEntry' items."
::= { alaVrrp3Operations 2 }
alaVrrp3OperEntry OBJECT-TYPE
SYNTAX AlaVrrp3OperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alaVrrp3OperTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID, and ifIndex.
Note that rows in this table can be distinguished on a
Multi-stacked device running both VRRP over IPv4 and
IPv6 interfaces.
Rows in the table cannot be modified unless the value
of 'alaVrrp3OperAdminState' is 'disabled' and the
'alaVrrp3OperState' has transitioned to
'initialize'"
INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId,
ifIndex }
::= { alaVrrp3OperTable 1 }
AlaVrrp3OperEntry ::=
SEQUENCE {
alaVrrp3OperIpVersion
INTEGER,
alaVrrp3OperVrId
VrId,
alaVrrp3OperVirtualMacAddr
MacAddress,
alaVrrp3OperState
INTEGER,
alaVrrp3OperAdminState
INTEGER,
alaVrrp3OperPriority
Integer32,
alaVrrp3OperVersion
INTEGER,
alaVrrp3OperIpAddrCount
Integer32,
alaVrrp3OperMasterIpAddrType
InetAddressType,
alaVrrp3OperMasterIpAddr
InetAddress,
alaVrrp3OperPrimaryIpAddrType
InetAddressType,
alaVrrp3OperPrimaryIpAddr
InetAddress,
alaVrrp3OperAdvInterval
Integer32,
alaVrrp3OperPreemptMode
TruthValue,
alaVrrp3OperAcceptMode
TruthValue,
alaVrrp3OperUpTime
TimeStamp,
alaVrrp3OperRowStatus
RowStatus
}
alaVrrp3OperIpVersion OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the IP version on which this VRRP
instance is running."
::= { alaVrrp3OperEntry 1 }
alaVrrp3OperVrId OBJECT-TYPE
SYNTAX VrId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the Virtual Router Identifier
(VRID)."
::= { alaVrrp3OperEntry 2 }
alaVrrp3OperVirtualMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual MAC address of the virtual router.
Although this object can be derived from the
'alaVrrp3OperVrId' object, it is defined so that it
is easily obtainable by a management application and
can be included in VRRP-related SNMP traps."
::= { alaVrrp3OperEntry 3 }
alaVrrp3OperState OBJECT-TYPE
SYNTAX INTEGER {
initialize (1),
backup (2),
master (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Setting the `alaVrrp3OperAdminState' object (below)
Initiates transitions in the value of this object."
::= { alaVrrp3OperEntry 4 }
alaVrrp3OperAdminState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to
`backup' or `master', depending on the value of
`alaVrrp3OperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend
on other factors, such as the interface (IF) state.
The `alaVrrp3OperAdminState' object must be set to
`down' prior to modifying the other read-create objects
in the conceptual row. The value of the
alaVrrp3OperRowStatus' object (below) must be
`active', signifying that the conceptual row is valid
(i.e., the objects are correctly set), in order for
this object to be set to `up'."
DEFVAL { down }
::= { alaVrrp3OperEntry 5 }
alaVrrp3OperPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has
ceased to participate in VRRP and a backup virtual
router should transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es)."
DEFVAL { 100 }
::= { alaVrrp3OperEntry 6 }
alaVrrp3OperVersion OBJECT-TYPE
SYNTAX INTEGER {
vrrpv2 (1),
vrrpv3 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the VRRP version this VRRP
instance is running."
::= { alaVrrp3OperEntry 7 }
alaVrrp3OperIpAddrCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP addresses associated with this
virtual router. This number is equal to the number
of rows in the alaVrrp3AssoIpAddrTable that
correspond to a given combination of IP version,
VRID, and ifIndex."
::= { alaVrrp3OperEntry 8 }
alaVrrp3OperMasterIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of
alaVrrp3OperMasterIpAddr in this row."
::= { alaVrrp3OperEntry 9 }
alaVrrp3OperMasterIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master router's real (primary for vrrp over IPv4)
IP address. This is the IP address listed as the
source in the advertisement last received by this
virtual router. For IPv6, a link local address."
::= { alaVrrp3OperEntry 10 }
alaVrrp3OperPrimaryIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the the type of
alaVrrp3OperPrimaryIpAddr in this row."
::= { alaVrrp3OperEntry 11 }
alaVrrp3OperPrimaryIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For VRRP over IPv6 this is the link local address
for a given ifIndex. For VRRP over IPv4, in the
case where there is more than one IP address for
a given `ifIndex', this object is used to
specify the IP address that will become the
alaVrrp3OperMasterIpAddr', should the virtual router
transition from backup to master."
DEFVAL { '00000000'H } -- 0.0.0.0 or ::
::= { alaVrrp3OperEntry 12 }
alaVrrp3OperAdvInterval OBJECT-TYPE
SYNTAX Integer32 (1..4095)
UNITS "centiseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements."
DEFVAL { 100 }
::= { alaVrrp3OperEntry 13 }
alaVrrp3OperPreemptMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether a higher priority virtual router will
preempt a lower priority master."
DEFVAL { true }
::= { alaVrrp3OperEntry 14 }
alaVrrp3OperAcceptMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether a virtual router in the master state
will accept packets addressed to the address owner's
IPv6 address as its own it it is not the IP address
owner.
This is required only for rows indicating VRRP over IPv6.
This object can be sparse and should not be implemented
for rows indicating VRRP for Ipv4."
DEFVAL { true }
::= { alaVrrp3OperEntry 15 }
alaVrrp3OperUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of the `sysUpTime' object when this
virtual router (i.e., the `alaVrrp3OperState') transitioned
out of `initialized'."
::= { alaVrrp3OperEntry 16 }
alaVrrp3OperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used in accordance to
installation and removal conventions for conceptual
rows. The rowstatus of a currently active row in the
alaVrrp3OperTable is constrained by the operational
state of the corresponding virtual router.
When `alaVrrp3OperRowStatus' is set to active(1), no
other objects in the conceptual row, with the exception
of `alaVrrp3OperAdminState', can be modified. Prior
to setting the `alaVrrp3OperRowStatus' object from
`active' to a different value, the
`alaVrrp3OperAdminState' object must be set to
`down' and the `alaVrrp3OperState' object be transitioned
to `initialize'.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the `alaVrrp3OperRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance
of `alaVrrp3OperVrId' has been set and there is at
least one active row in the `alaVrrp3AssoIpAddrTable'
defining an associated IP address for the virtual
router."
::= { alaVrrp3OperEntry 17 }
--
-- VRRP Associated Address Table
--
alaVrrp3AssoIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVrrp3AssoIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addresses associated with this
virtual router."
::= { alaVrrp3Operations 3 }
alaVrrp3AssoIpAddrEntry OBJECT-TYPE
SYNTAX AlaVrrp3AssoIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table contains an IP address that is
associated with a virtual router. The number of rows
for a given IP version, VrId, and ifIndex will equal
the number of IP addresses associated (e.g., backed
up) by the virtual router (equivalent to
'alaVrrp3OperIpAddrCount').
Rows in the table cannot be modified unless the value
of `alaVrrp3OperAdminState' is `disabled' and the
`alaVrrp3OperState' has transitioned to`initialize'."
INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex,
alaVrrp3AssoIpAddrType, alaVrrp3AssoIpAddr }
::= { alaVrrp3AssoIpAddrTable 1 }
AlaVrrp3AssoIpAddrEntry ::=
SEQUENCE {
alaVrrp3AssoIpAddrType
InetAddressType,
alaVrrp3AssoIpAddr
InetAddress,
alaVrrp3AssoIpAddrRowStatus
RowStatus
}
alaVrrp3AssoIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP addresses type of alaVrrp3AssoIpAddr in this
row."
::= { alaVrrp3AssoIpAddrEntry 1 }
alaVrrp3AssoIpAddr OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The assigned IP addresses that a virtual router is
responsible for backing up."
::= { alaVrrp3AssoIpAddrEntry 2 }
alaVrrp3AssoIpAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
installation and removal conventions for conceptual
rows. Setting this object to active(1) or
createAndGo(4) results in the addition of an associated
address for a virtual router.
Destroying the entry or setting it to notInService(2)
removes the associated address from the virtual router.
The use of other values is implementation-dependent."
::= { alaVrrp3AssoIpAddrEntry 3 }
--
-- VRRP Router Statistics
--
alaVrrp3RouterChecksumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets received with an
invalid VRRP checksum value."
::= { alaVrrp3Statistics 1 }
alaVrrp3RouterVersionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets received with an
unknown or unsupported version number."
::= { alaVrrp3Statistics 2 }
alaVrrp3RouterVrIdErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets received with an
invalid VRID for this virtual router."
::= { alaVrrp3Statistics 3 }
--
-- VRRP Router Statistics Table
--
alaVrrp3RouterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVRRP3RouterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of virtual router statistics."
::= { alaVrrp3Statistics 4 }
alaVrrp3RouterStatsEntry OBJECT-TYPE
SYNTAX AlaVRRP3RouterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing statistics
information about a given virtual router."
INDEX { alaVrrp3OperIpVersion, alaVrrp3OperVrId,
ifIndex }
::= { alaVrrp3RouterStatsTable 1 }
AlaVRRP3RouterStatsEntry ::=
SEQUENCE {
alaVrrp3StatsBecomeMaster
Counter32,
alaVrrp3StatsAdvertiseRcvd
Counter32,
alaVrrp3StatsAdvIntervalErrors
Counter32,
alaVrrp3StatsIpTtlErrors
Counter32,
alaVrrp3StatsPriZeroPktsRcvd
Counter32,
alaVrrp3StatsPriZeroPktsSent
Counter32,
alaVrrp3StatsInvldTypePktsRcvd
Counter32,
alaVrrp3StatsAddressListErrors
Counter32,
alaVrrp3StatsInvldAuthType
Counter32,
alaVrrp3StatsPacketLengthErrors
Counter32
}
alaVrrp3StatsBecomeMaster OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times that this virtual router's
state has transitioned to MASTER."
::= { alaVrrp3RouterStatsEntry 1 }
alaVrrp3StatsAdvertiseRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP advertisements received by
this virtual router."
::= { alaVrrp3RouterStatsEntry 2 }
alaVrrp3StatsAdvIntervalErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP advertisement packets
received for which the advertisement interval is
different than the one configured for the local virtual
router."
::= { alaVrrp3RouterStatsEntry 3 }
alaVrrp3StatsIpTtlErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets received by the
virtual router with IP TTL (Time-To-Live) not equal to
255. It also indicates the number of VRRPv3 packets
received by the virtual router with IPv6 hop limit not
equal to 255."
::= { alaVrrp3RouterStatsEntry 4 }
alaVrrp3StatsPriZeroPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets received by the
virtual router with a priority of '0'."
::= { alaVrrp3RouterStatsEntry 5 }
alaVrrp3StatsPriZeroPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of VRRP packets sent by the virtual
router with a priority of '0'."
::= { alaVrrp3RouterStatsEntry 6 }
alaVrrp3StatsInvldTypePktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VRRP packets received by the virtual
router with an invalid value in the 'type' field."
::= { alaVrrp3RouterStatsEntry 7 }
alaVrrp3StatsAddressListErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received for which the
address list does not match the locally configured list
for the virtual router."
::= { alaVrrp3RouterStatsEntry 8 }
alaVrrp3StatsInvldAuthType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with 'Auth Type'
not equal to Authentication Type 0, No Authentication.
This is required only for rows indicating VRRP over IPv4.
This object can be sparse and should not be implemented
for rows indicating VRRP for Ipv6."
::= { alaVrrp3RouterStatsEntry 9 }
alaVrrp3StatsPacketLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a packet
length less than the length of the VRRP header."
::= { alaVrrp3RouterStatsEntry 10 }
--
-- Trap Definitions
--
alaVrrp3Notifications OBJECT IDENTIFIER ::= { alcatelIND1VRRP3MIB 0 }
---
--- Objects used in the traps
---
alaVrrp3TrapNewMasterReason OBJECT-TYPE
SYNTAX INTEGER {
priority (0),
preempted (1),
masterNoResponse (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This indicates the reason for NewMaster trap.
Used by alaVrrp3TrapNewMaster trap."
::= { alaVrrp3Operations 4 }
alaVrrp3TrapProtoErrReason OBJECT-TYPE
SYNTAX INTEGER {
hopLimitError (0),
versionError (1),
checksumError (2),
vridError (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This indicates the reason for protocol error trap.
Used by alaVrrp3TrapProtoError trap."
::= { alaVrrp3Operations 5 }
alaVrrp3TrapNewMaster NOTIFICATION-TYPE
OBJECTS { alaVrrp3OperMasterIpAddrType,
alaVrrp3OperMasterIpAddr,
alaVrrp3TrapNewMasterReason
}
STATUS current
DESCRIPTION
"The newMaster trap indicates that the sending agent
has transitioned to 'Master' state."
::= { alaVrrp3Notifications 1 }
alaVrrp3TrapProtoError NOTIFICATION-TYPE
OBJECTS { alaVrrp3TrapProtoErrReason
}
STATUS current
DESCRIPTION
"The error trap indicates that the sending agent has
encountered the protocol error indicated by
ErrorReason."
::= { alaVrrp3Notifications 2 }
--
-- Conformance Information
--
alaVrrp3MIBCompliances OBJECT IDENTIFIER ::= { alaVrrp3Conformance 1 }
alaVrrp3MIBGroups OBJECT IDENTIFIER ::= { alaVrrp3Conformance 2 }
--
-- Compliance Statements
--
alaVrrp3MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for switches with Alcatel VRRP and
implementing ALCATEL-IND1-VRRP3-MIB."
MODULE -- this module
MANDATORY-GROUPS {
alaVrrp3OperGroup,
alaVrrp3StatsGroup,
alaVrrp3TrapInfoGroup,
alaVrrp3NotificationsGroup
}
OBJECT alaVrrp3OperPriority
WRITE-SYNTAX Integer32 (1..255)
DESCRIPTION "SETable values are from 1 to 255."
::= { alaVrrp3MIBCompliances 1 }
--
-- Conformance Groups
--
alaVrrp3OperGroup OBJECT-GROUP
OBJECTS {
alaVrrp3NotificationCntl,
alaVrrp3OperVirtualMacAddr,
alaVrrp3OperState,
alaVrrp3OperAdminState,
alaVrrp3OperPriority,
alaVrrp3OperVersion,
alaVrrp3OperIpAddrCount,
alaVrrp3OperMasterIpAddrType,
alaVrrp3OperMasterIpAddr,
alaVrrp3OperPrimaryIpAddrType,
alaVrrp3OperPrimaryIpAddr,
alaVrrp3OperAdvInterval,
alaVrrp3OperPreemptMode,
alaVrrp3OperAcceptMode,
alaVrrp3OperUpTime,
alaVrrp3OperRowStatus,
alaVrrp3AssoIpAddrRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support management of Alcatel VRRP."
::= { alaVrrp3MIBGroups 1 }
alaVrrp3StatsGroup OBJECT-GROUP
OBJECTS {
alaVrrp3RouterChecksumErrors,
alaVrrp3RouterVersionErrors,
alaVrrp3RouterVrIdErrors,
alaVrrp3StatsBecomeMaster,
alaVrrp3StatsAdvertiseRcvd,
alaVrrp3StatsAdvIntervalErrors,
alaVrrp3StatsPriZeroPktsRcvd,
alaVrrp3StatsPriZeroPktsSent,
alaVrrp3StatsInvldTypePktsRcvd,
alaVrrp3StatsInvldAuthType,
alaVrrp3StatsIpTtlErrors,
alaVrrp3StatsAddressListErrors,
alaVrrp3StatsPacketLengthErrors
}
STATUS current
DESCRIPTION
"A collection of objects to support management of Alcatel VRRP."
::= { alaVrrp3MIBGroups 2 }
alaVrrp3TrapInfoGroup OBJECT-GROUP
OBJECTS {
alaVrrp3TrapNewMasterReason,
alaVrrp3TrapProtoErrReason
}
STATUS current
DESCRIPTION
"A collection of objects to support management of Alcatel VRRP."
::= { alaVrrp3MIBGroups 3 }
alaVrrp3NotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
alaVrrp3TrapNewMaster,
alaVrrp3TrapProtoError
}
STATUS current
DESCRIPTION
"A collection of objects to support management of Alcatel VRRP."
::= { alaVrrp3MIBGroups 4 }
END