david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-SDP-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

5788 lines
232 KiB
Plaintext
Raw Blame History

ALCATEL-IND1-TIMETRA-SDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Gauge32,
Integer32, Unsigned32, IpAddress,
Counter64, Counter32 FROM SNMPv2-SMI
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
RowStatus, MacAddress, TimeStamp, DisplayString,
TruthValue FROM SNMPv2-TC
InterfaceIndexOrZero FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
ServiceAdminStatus,
TmnxServId, TmnxCustId, TNamedItem, SdpBindId, TNamedItemOrEmpty,
TmnxVRtrMplsLspID, TmnxOperState, TmnxIgmpVersion,
TmnxEnabledDisabled, TItemDescription, TPolicyStatementNameOrEmpty,
TmnxVPNRouteDistinguisher FROM ALCATEL-IND1-TIMETRA-TC-MIB
tmnxServObjs, tmnxServConformance, tmnxServNotifications, tmnxSvcObjs,
custId, svcId, svcVpnId, tstpTraps,
tmnxOtherBridgeId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId,
tmnxOldSdpBindTlsStpPortState, svcTlsStpDesignatedRoot,
tlsDhcpPacketProblem, svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr, svcDhcpLseStateOldCiAddr,
svcDhcpLseStateOldChAddr, svcDhcpClientLease, svcDhcpLseStatePopulateError,
svcTlsMacMoveMaxRate, svcDhcpProxyError, svcDhcpCoAError,
svcDhcpPacketProblem, svcDhcpSubAuthError,
ServObjName, ServObjDesc,
VpnId, SdpId, PWTemplateId, SdpBindTlsBpduTranslation,
TlsLimitMacMoveLevel, TlsLimitMacMove, SdpBindVcType,
StpExceptionCondition, LspIdList, BridgeId, TStpPortState,
StpPortRole, StpProtocol, MvplsPruneState, TdmOptionsSigPkts,
TdmOptionsCasTrunkFraming, SdpBFHundredthsOfPercent, SdpBindBandwidth,
L2ptProtocols, L2RouteOrigin, ConfigStatus FROM ALCATEL-IND1-TIMETRA-SERV-MIB
timetraSRMIBModules FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
TFilterID FROM ALCATEL-IND1-TIMETRA-FILTER-MIB
tmnxChassisIndex, tmnxCardSlotNum,
tmnxMDASlotNum FROM ALCATEL-IND1-TIMETRA-CHASSIS-MIB;
timetraServicesSdpMIBModule MODULE-IDENTITY
LAST-UPDATED "0710010000Z"
ORGANIZATION "Alcatel"
CONTACT-INFO
"Alcatel 7x50 Support
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision
the various services of the Alcatel 7x50 SR system.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction
of this document is authorized on the condition that the
foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains all title
and ownership in the Specification, including any revisions.
Alcatel grants all interested parties a non-exclusive license
to use and distribute an unmodified copy of this Specification
in connection with management of Alcatel products, and without
fee, provided this copyright notice and license appear on all
copies.
This Specification is supplied `as is', and Alcatel makes no
warranty, either express or implied, as to the use, operation,
condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0710010000Z"
DESCRIPTION "Rev 1.0 01 Oct 2007 00:00
1.0 release of the TIMETRA-SDP-MIB from TIMETRA-SERV-MIB."
::= { timetraSRMIBModules 56 }
-- --------------------------------------------------------------------
-- ALCATEL-IND1-TIMETRA-SERV-MIB organisation
-- --------------------------------------------------------------------
tmnxSdpObjs OBJECT IDENTIFIER ::= { tmnxServObjs 4 }
tmnxSdpNotifyObjs OBJECT IDENTIFIER ::= { tmnxSdpObjs 100 }
tmnxSdpConformance OBJECT IDENTIFIER ::= { tmnxServConformance 4 }
sdpTrapsPrefix OBJECT IDENTIFIER ::= { tmnxServNotifications 4 }
sdpTraps OBJECT IDENTIFIER ::= { sdpTrapsPrefix 0 }
-- --------------------------------------------------------------------
-- tmnxSdpObjs group
-- --------------------------------------------------------------------
sdpNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of SDPs configured in this
device."
::= { tmnxSdpObjs 1 }
sdpNextFreeId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The next available value for sdpId."
::= { tmnxSdpObjs 2 }
-- ----------------------------
-- SDP Table
-- ----------------------------
sdpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SDP information."
::= { tmnxSdpObjs 3 }
sdpInfoEntry OBJECT-TYPE
SYNTAX SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SDP."
INDEX { sdpId }
::= { sdpInfoTable 1 }
SdpInfoEntry ::=
SEQUENCE {
sdpId SdpId,
sdpRowStatus RowStatus,
sdpDelivery INTEGER,
sdpFarEndIpAddress IpAddress,
sdpLspList LspIdList,
sdpDescription ServObjDesc,
sdpLabelSignaling INTEGER,
sdpAdminStatus ServiceAdminStatus,
sdpOperStatus INTEGER,
sdpAdminPathMtu INTEGER,
sdpOperPathMtu Integer32,
sdpKeepAliveAdminStatus INTEGER,
sdpKeepAliveOperStatus INTEGER,
sdpKeepAliveHelloTime INTEGER,
sdpKeepAliveMaxDropCount INTEGER,
sdpKeepAliveHoldDownTime INTEGER,
sdpLastMgmtChange TimeStamp,
sdpKeepAliveHelloMessageLength INTEGER,
sdpKeepAliveNumHelloRequestMessages Unsigned32,
sdpKeepAliveNumHelloResponseMessages Unsigned32,
sdpKeepAliveNumLateHelloResponseMessages Unsigned32,
sdpKeepAliveHelloRequestTimeout INTEGER,
sdpLdpEnabled TruthValue,
sdpVlanVcEtype Unsigned32,
sdpAdvertisedVllMtuOverride TruthValue,
sdpOperFlags BITS,
sdpLastStatusChange TimeStamp,
sdpMvplsMgmtService TmnxServId,
sdpMvplsMgmtSdpBndId SdpBindId,
sdpCollectAcctStats TruthValue,
sdpAccountingPolicyId Unsigned32,
sdpClassFwdingEnabled TruthValue,
sdpClassFwdingDefaultLsp TmnxVRtrMplsLspID,
sdpClassFwdingMcLsp TmnxVRtrMplsLspID,
sdpMetric Unsigned32,
sdpAutoSdp TruthValue,
sdpSnmpAllowed TruthValue,
sdpPBBEtype Unsigned32,
sdpBandwidthBookingFactor Unsigned32,
sdpOperBandwidth Unsigned32,
sdpAvailableBandwidth Unsigned32,
sdpMaxBookableBandwidth Unsigned32,
sdpBookedBandwidth Unsigned32,
sdpCreationOrigin L2RouteOrigin
}
sdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SDP identifier."
::= { sdpInfoEntry 1 }
sdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'. To delete an entry
from this table, the corresponding SDP must be
administratively down, not bound to any service,
and not in use as a mirror destination."
::= { sdpInfoEntry 2 }
sdpDelivery OBJECT-TYPE
SYNTAX INTEGER {
gre (1),
mpls (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the type of delivery used
by this SDP: e.g. GRE or MPLS. The value of this
object must be specified when the row is created
and cannot be changed while the row status is
'active'."
::= { sdpInfoEntry 3 }
sdpFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the IP address of the
remote end of the GRE or MPLS tunnel defined
by this SDP. The value of this object must
be set for the row to become 'active', and
can only be changed while the admin status
of the SDP is 'down'."
::= { sdpInfoEntry 4 }
sdpLspList OBJECT-TYPE
SYNTAX LspIdList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the SDP delivery specified by sdpDelivery
is 'mpls', this object specifies the list of
LSPs used to reach the far-end ESR device.
All the LSPs in this list must terminate at the
IP address specified by sdpFarEndIpAddress. This
object is otherwise insignificant and should
contain a value of 0.
When this list has more than one element, the
Alcatel 7x50 SR router will use all of the LSPs for
load balancing purposes. Each LSP ID in the list
corresponds to the vRtrMplsLspIndex of the given
MPLS LSP."
::= { sdpInfoEntry 5 }
sdpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SDP."
DEFVAL { "" }
::= { sdpInfoEntry 6 }
sdpLabelSignaling OBJECT-TYPE
SYNTAX INTEGER {
none (1),
tldp (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the signaling protocol
used to obtain the ingress and egress labels
used in frames transmitted and received on
this SDP. When the value of this object is
'none' then the labels are manually assigned
at the time the SDP is bound to a service. The
value of this object can only be changed while
the admin status of the SDP is 'down'."
DEFVAL { tldp }
::= { sdpInfoEntry 7 }
sdpAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this SDP."
DEFVAL { down }
::= { sdpInfoEntry 8 }
sdpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
notAlive (2),
notReady (3),
invalidEgressInterface (4),
transportTunnelDown (5),
down (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating state of this SDP. The value
'notAlive' is valid only when keep-alive is
enabled, and it means that the keep-alive
operating status is not alive. The value
'notReady' is valid only when this SDP uses a
label signaling protocol (e.g. TLDP) and it means
that the signaling session with the far-end peer
has not been established. The value
'invalidEgressInterface' indicates that the
IOM's have detected that the egress interface
towards the far-end device is not a network
port."
::= { sdpInfoEntry 9 }
sdpAdminPathMtu OBJECT-TYPE
SYNTAX INTEGER (0|576..9194)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the desired largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented. The default
value of zero indicates that the path MTU should
be computed dynamically from the corresponding
MTU of the tunnel."
DEFVAL { 0 }
::= { sdpInfoEntry 10 }
sdpOperPathMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the actual largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented. In order
to be able to bind this SDP to a given service,
the value of this object must be equal to or
larger than the MTU of the service, as defined
by its svcMtu."
::= { sdpInfoEntry 11 }
sdpKeepAliveAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to enable or disable the
keep-alive protocol used to determine the
operating status of this SDP."
DEFVAL { disabled }
::= { sdpInfoEntry 12 }
sdpKeepAliveOperStatus OBJECT-TYPE
SYNTAX INTEGER {
alive (1),
noResponse (2),
senderIdInvalid (3),
responderIdError (4),
disabled (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status of the keep-alive protocol.
The value 'alive' indicates that the far-end
ESR is replying the SDP Echo Requests messages
sent by this device indicating no error condition.
The value 'noResponse' indicates that the number
of consecutive SDP Echo Request messages unack-
nowledged by the far-end ESR exceeded the limit
defined by sdpKeepAliveMaxDropCount. The values
'senderIdInvalid' and 'responderIdError' are
two error conditions detected by the far-end ESR.
The value 'disabled' indicates that the keep-alive
protocol is not enabled."
::= { sdpInfoEntry 13 }
sdpKeepAliveHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies how often the SDP Echo
Request messages are transmitted on this SDP."
DEFVAL { 10 }
::= { sdpInfoEntry 14 }
sdpKeepAliveMaxDropCount OBJECT-TYPE
SYNTAX INTEGER (1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the maximum number of
consecutive SDP Echo Request messages that can
be unacknowledged before the keep-alive
protocol reports a fault."
DEFVAL { 3 }
::= { sdpInfoEntry 15 }
sdpKeepAliveHoldDownTime OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the amount of time to
wait before the keep-alive operating status
is eligible to enter the 'alive' state."
DEFVAL { 10 }
::= { sdpInfoEntry 16 }
sdpLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SDP."
::= { sdpInfoEntry 17 }
sdpKeepAliveHelloMessageLength OBJECT-TYPE
SYNTAX INTEGER (0 | 40..9198)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the length of the
SDP Echo Request messages transmitted on
this SDP. The default value of zero
indicates that the message length should
be equal to the SDP's operating path MTU,
as specified by sdpOperPathMtu. When the
default value is overridden, the message
length is sdpKeepAliveHelloMessageLength."
DEFVAL { 0 }
::= { sdpInfoEntry 18 }
sdpKeepAliveNumHelloRequestMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of SDP Echo Request messages
transmitted since the keep-alive was
administratively enabled or the counter
was cleared."
::= { sdpInfoEntry 19 }
sdpKeepAliveNumHelloResponseMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of SDP Echo Response messages
received since the keep-alive was
administratively enabled or the counter
was cleared."
::= { sdpInfoEntry 20 }
sdpKeepAliveNumLateHelloResponseMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of SDP Echo Response messages
received after the corresponding Request
timeout timer expired."
::= { sdpInfoEntry 21 }
sdpKeepAliveHelloRequestTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The number of seconds to wait for an SDP
Echo Response message before declaring
a timeout."
DEFVAL { 5 }
::= { sdpInfoEntry 22 }
sdpLdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of this object is 'true'
the transport LSP's are signalled by LDP,
as opposed to being provisioned static or
RSVP-signalled LSP's. This object applies
only to MPLS SDP's."
DEFVAL { false }
::= { sdpInfoEntry 23 }
sdpVlanVcEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the Ethertype used in
frames sent out this SDP, when the VC type
is vlan."
DEFVAL { '8100'H }
::= { sdpInfoEntry 24 }
sdpAdvertisedVllMtuOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of this object is 'true'
the advertised MTU of a VLL spoke SDP bind
includes the 14-byte L2 header, so that it is
backward compatible with pre-2.0 software."
DEFVAL { false }
::= { sdpInfoEntry 25 }
sdpOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpAdminDown (0),
signalingSessionDown (1),
transportTunnelDown (2),
keepaliveFailure (3),
invalidEgressInterface (4),
noSystemIpAddress (5),
transportTunnelUnstable (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SDP."
::= { sdpInfoEntry 26 }
sdpLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to this
SDP."
::= { sdpInfoEntry 27 }
sdpMvplsMgmtService OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpMvplsMgmtService indicates
the service Id of the service where the STP instance
is running that is managing this SDP. This object is
only valid if sdpMvplsMgmtService is different from
0."
::= { sdpInfoEntry 28 }
sdpMvplsMgmtSdpBndId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpMvplsMgmtSdpBndId indicates
which SDP bind in the mVPLS instance specified in
sdpMvplsMgmtService is controlling this SDP. This
object is only valid if sdpMvplsMgmtService is
different from 0."
::= { sdpInfoEntry 29 }
sdpCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpCollectAcctStats specifies
whether the agent collects accounting statistics for this
SDP. When the value is 'true' the agent
collects accounting statistics on this SDP."
DEFVAL { false }
::= { sdpInfoEntry 30 }
sdpAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpAccountingPolicyId specifies the
policy to use to collect accounting statistics on
this SDP. The value zero indicates that the
agent should use the default accounting policy,
if one exists."
DEFVAL { 0 }
::= { sdpInfoEntry 31 }
sdpClassFwdingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpClassFwdingEnabled specifies the
admin state of class-based forwarding on this SDP. When
the value is 'true', class-based forwarding is enabled."
DEFVAL { false }
::= { sdpInfoEntry 32 }
sdpClassFwdingDefaultLsp OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpClassFwdingDefaultLsp specifies the
LSP ID that is used as a default when class-based
forwarding is enabled on this SDP. This object
must be set when enabling class-based forwarding."
DEFVAL { 0 }
::= { sdpInfoEntry 33 }
sdpClassFwdingMcLsp OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpClassFwdingMcLsp specifies the LSP ID that
all multicast traffic will be forwarded on when class-based
forwarding is enabled on this SDP. When this object has its
default value, multicast traffic will be forwarded
on an LSP according to its forwarding class mapping."
DEFVAL { 0 }
::= { sdpInfoEntry 34 }
sdpMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpMetric specifies the metric to be used
within the Tunnel Table Manager for decision making
purposes. When multiple SDPs going to the same destination
exist, this value is used as a tie-breaker by Tunnel Table
Manager users like MP-BGP to select route with lower
value."
DEFVAL { 0 }
::= { sdpInfoEntry 35 }
sdpAutoSdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoSdp indicates whether this is an
Auto generated SDP from RADIUS discovery or BGP
auto-discovery."
::= { sdpInfoEntry 36 }
sdpSnmpAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpSnmpAllowed indicates if SNMP sets
are allowed on this SDP."
::= { sdpInfoEntry 37 }
sdpPBBEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the Ethertype used in frames sent
out on this SDP when sdpBindVcType is 'vlan' for
Provider Backbone Bridging frames."
DEFVAL { '88E7'H }
::= { sdpInfoEntry 38 }
sdpBandwidthBookingFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sdpBandwidthBookingFactor is used to calculate the max
SDP available bandwidth. The value of
sdpBandwidthBookingFactor specifies the percentage of the
SDP max available bandwidth for VLL call admission. When
the value of sdpBandwidthBookingFactor is set to zero (0),
no new VLL spoke-sdp bindings with non-zero bandwidth are
permitted with this SDP. Overbooking, >100% is allowed."
DEFVAL { 100 }
::= { sdpInfoEntry 39 }
sdpOperBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpOperBandwidth indicates the operational
Bandwidth in kilo-bits per seconds (Kbps) available for
this SDP. The value sdpOperBandwidth is determined by the
sum of the bandwidth of all the RSVP LSPs used by the
SDP."
::= { sdpInfoEntry 40 }
sdpAvailableBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAvailableBandwidth indicates the Bandwidth
that is still free for booking by the SDP bindings on the
SDP."
::= { sdpInfoEntry 41 }
sdpMaxBookableBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bits per second"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of sdpMaxBookableBandwidth indicates the max
Bandwidth that the SDP has for booking by the SDP
bindings. The value of sdpMaxBookableBandwidth is
calculated as follow:
sdpMaxBookableBandwidth = sdpOperBandwidth *
sdpBandwidthBookingFactor
"
::= { sdpInfoEntry 42 }
sdpBookedBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilo-bits per second"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of sdpBookedBandwidth indicates the
SDP Bandwidth that has been booked by the SDP
bindings."
::= { sdpInfoEntry 43 }
sdpCreationOrigin OBJECT-TYPE
SYNTAX L2RouteOrigin
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpCreationOrigin indicates the protocol or
mechanism which created this SDP."
::= { sdpInfoEntry 44 }
-- -------------------------
-- SDP Bind Table
-- -------------------------
sdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SDP binding information."
::= { tmnxSdpObjs 4 }
sdpBindEntry OBJECT-TYPE
SYNTAX SdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SDP binding."
INDEX { svcId, sdpBindId }
::= { sdpBindTable 1 }
SdpBindEntry ::=
SEQUENCE {
sdpBindId SdpBindId,
sdpBindRowStatus RowStatus,
sdpBindAdminIngressLabel Unsigned32,
sdpBindAdminEgressLabel Unsigned32,
sdpBindOperIngressLabel Unsigned32,
sdpBindOperEgressLabel Unsigned32,
sdpBindAdminStatus ServiceAdminStatus,
sdpBindOperStatus INTEGER,
sdpBindLastMgmtChange TimeStamp,
sdpBindType INTEGER,
sdpBindIngressMacFilterId TFilterID,
sdpBindIngressIpFilterId TFilterID,
sdpBindEgressMacFilterId TFilterID,
sdpBindEgressIpFilterId TFilterID,
sdpBindVpnId VpnId,
sdpBindCustId TmnxCustId,
sdpBindVcType SdpBindVcType,
sdpBindVlanVcTag Unsigned32,
sdpBindSplitHorizonGrp ServObjName,
sdpBindOperFlags BITS,
sdpBindLastStatusChange TimeStamp,
sdpBindIesIfIndex InterfaceIndexOrZero,
sdpBindMacPinning TmnxEnabledDisabled,
sdpBindIngressIpv6FilterId TFilterID,
sdpBindEgressIpv6FilterId TFilterID,
sdpBindCollectAcctStats TruthValue,
sdpBindAccountingPolicyId Unsigned32,
sdpBindPwPeerStatusBits BITS,
sdpBindPeerVccvCvBits BITS,
sdpBindPeerVccvCcBits BITS,
sdpBindControlWordBit TruthValue,
sdpBindOperControlWord TruthValue,
sdpBindEndPoint ServObjName,
sdpBindEndPointPrecedence Unsigned32,
sdpBindIsICB TruthValue,
sdpBindPwFaultInetAddressType InetAddressType,
sdpBindPwFaultInetAddress InetAddress,
sdpBindClassFwdingOperState TmnxOperState,
sdpBindForceVlanVcForwarding TruthValue,
sdpBindAdminBandwidth SdpBindBandwidth,
sdpBindOperBandwidth SdpBindBandwidth
}
sdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SDP Binding identifier."
::= { sdpBindEntry 1 }
sdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'."
::= { sdpBindEntry 2 }
sdpBindAdminIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1 | 2048..18431)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The static MPLS VC label used by the far-end device
to send packets to this device in this service via
this SDP. The value of sdpBindAdminIngressLabel is
1 when it is used by a mirror service. All mirror SDPs
use this label to avoid the unnecessary use of
additional labels."
DEFVAL { 0 }
::= { sdpBindEntry 3 }
sdpBindAdminEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The static MPLS VC label used by this device to send
packets to the far-end device in this service via
this SDP."
DEFVAL { 0 }
::= { sdpBindEntry 4 }
sdpBindOperIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MPLS label used by the far-end device to send
packets to this device in this service via this SDP.
This label is either sdpBindAdminIngressLabel, if
not null, or the one obtained via the SDP's signaling
protocol."
DEFVAL { 0 }
::= { sdpBindEntry 5 }
sdpBindOperEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MPLS label used by this device to send packets
to the far-end device in this service via this SDP.
This label is either sdpBindAdminEgressLabel, if
not null, or the one obtained via the SDP's signaling
protocol."
DEFVAL { 0 }
::= { sdpBindEntry 6 }
sdpBindAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this Service-SDP binding."
DEFVAL { up }
::= { sdpBindEntry 7 }
sdpBindOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
noEgressLabel (2),
noIngressLabel (3),
noLabels (4),
down (5),
svcMtuMismatch (6),
sdpPathMtuTooSmall (7),
sdpNotReady (8),
sdpDown (9),
sapDown (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindOperStatus indicates the operating status of
this Service-SDP binding.
'up' The Service-SDP binding is operational.
'noEgressLabel' The ingress label is available but the
egress one is missing.
'noIngressLabel' The egress label is available but the
ingress one is not.
'noLabels' Both the ingress and the egress labels
are missing.
'down' The binding is administratively down.
'svcMtuMismatch' Both labels are available, but a service
MTU mismatch was detected between the local
and the far-end devices.
'sdpPathMtuTooSmall' The operating path MTU of the corresponding
SDP is smaller than the service MTU.
'sdpNotReady' The SDP's signaling session is down.
'sdpDown' The SDP is not operationally up.
'sapDown' The SAP associated with the service is down."
::= { sdpBindEntry 8 }
sdpBindLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this Service-SDP binding."
::= { sdpBindEntry 9 }
sdpBindType OBJECT-TYPE
SYNTAX INTEGER {
spoke (1),
mesh (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates whether this Service SDP
binding is a spoke or a mesh. The value of this
object must be specified when the row is created
and cannot be changed while the row status is
'active'."
DEFVAL { mesh }
::= { sdpBindEntry 10 }
sdpBindIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tMacFilterTable
corresponding to this ingress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 11 }
sdpBindIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tIPFilterTable
corresponding to this ingress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 12 }
sdpBindEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 13 }
sdpBindEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 14 }
sdpBindVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VPN ID of the associated service."
::= { sdpBindEntry 15 }
sdpBindCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID of the associated service."
::= { sdpBindEntry 16 }
sdpBindVcType OBJECT-TYPE
SYNTAX SdpBindVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindVcType is an enumerated integer that specifies
the type of virtual circuit (VC) associated with the SDP binding.
The value 'vpls' is no longer supported."
::= { sdpBindEntry 17 }
sdpBindVlanVcTag OBJECT-TYPE
SYNTAX Unsigned32 ('0000'H..'0fff'H)
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { '0fff'H }
::= { sdpBindEntry 18 }
sdpBindSplitHorizonGrp OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This value of the object sdpBindSplitHorizonGrp specifies
the name of the split-horizon group where the spoke SDP
Bind belongs to. This object can be set only at the time
the row is created. Per default a spoke SDP Bind does not
belong to any split-horizon group. The name specified must
correspond to an existing split-horizon group in the TLS
service where this spoke SDP Bind is defined."
DEFVAL { "" }
::= { sdpBindEntry 19 }
sdpBindOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpBindAdminDown (0), -- SDP Bind is admin down
svcAdminDown (1), -- Service is admin down
sapOperDown (2), -- SAP is oper down (VLL's only)
sdpOperDown (3), -- SDP is oper down
sdpPathMtuTooSmall (4), -- SDP's path MTU is less than Service MTU
noIngressVcLabel (5), -- No ingress VC label
noEgressVcLabel (6), -- No egress VC label
svcMtuMismatch (7), -- Service MTU mismatch with the remote PE
vcTypeMismatch (8), -- VC type mismatch with the remote PE
relearnLimitExceeded (9), -- MAC relearn limit was exceeded (TLS only)
iesIfAdminDown (10),-- IP interface is admin down (IES and VPRN only)
releasedIngressVcLabel (11),-- Peer released our ingress VC label
labelsExhausted (12),-- Label Manager has ran out of labels
svcParamMismatch (13),-- Service-specific parameter mismatch
insufficientBandwidth (14),-- Insufficient bandwidth to allocate to SDP binding
pwPeerFaultStatusBits (15),-- Received PW fault status bits from peer
meshSdpDown (16) -- Mesh SDP Down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SDP Bind."
::= { sdpBindEntry 20 }
sdpBindLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindLastStatusChange specifies
the value of sysUpTime at the time of the most recent
operating status change to this SDP Bind."
::= { sdpBindEntry 21 }
sdpBindIesIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When this SDP Bind is defined on an IES service
and the value of sdpBindType is 'spoke', this
object specifies the index of the associated IES
interface. The value of this object can be set
only when the row is created and cannot be changed
while the row status is 'active'. This object is
otherwise not significant and should have
the value zero."
::= { sdpBindEntry 22 }
sdpBindMacPinning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpBindMacPinning specifies
whether or not MAC address pinning is active on this SDP
bind (mesh or spoke). Setting the value to enable disables
re-learning of MAC addresses on other SAPs or SDPs
within the same VPLS; the MAC address will hence
remain attached to the SDP Bind for the duration of
its age-timer. This object has effect only for MAC
addresses learned via the normal MAC learning
process, and not for entries learned via DHCP. The
value will be set by default to disabled. However for
a spoke SDP that belongs to a residential SHG, the
value is set to enabled by the system, and cannot be
altered by the operator. This object applies to spoke-SDP
associated with the service with svcType set to
'tls'."
::= { sdpBindEntry 23 }
sdpBindIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpBindIngressIpv6FilterId
specifies the row index in the tIPv6FilterTable
corresponding to this ingress ipv6 filter,
or zero if no ipv6 filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 24 }
sdpBindEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpBindEgressIpv6FilterId
specifies the row index in the tIPv6FilterTable
corresponding to this egress ipv6 filter,
or zero if no ipv6 filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 25 }
sdpBindCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpBindCollectAcctStats specifies
whether the agent collects accounting statistics for this
SDP bind. When the value is 'true' the agent
collects accounting statistics on this SDP bind."
DEFVAL { false }
::= { sdpBindEntry 26 }
sdpBindAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpBindAccountingPolicyId specifies the
policy to use to collect accounting statistics on
this SDP bind. The value zero indicates that the
agent should use the default accounting policy,
if one exists."
DEFVAL { 0 }
::= { sdpBindEntry 27 }
sdpBindPwPeerStatusBits OBJECT-TYPE
SYNTAX BITS {
pwNotForwarding (0), -- Pseudo Wire Not Forwarding
lacIngressFault (1), -- Local Attachment Circuit Rx
-- Fault
lacEgresssFault (2), -- Local Attachment Circuit Tx
-- Fault
psnIngressFault (3), -- Local PSN-facing PW Rx Fault
psnEgressFault (4), -- Local PSN-facing PW Tx Fault
pwFwdingStandby (5) -- Pseudo Wire in Standby mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sdpBindPwPeerStatusBits indicates the bits set by the LDP
peer when there is a fault on its side of the pseudowire.
LAC failures occur on the SAP that has been configured on
the PIPE service, PSN bits are set by SDP-binding failures
on the PIPE service. The pwNotForwarding bit is set when
none of the above failures apply, such as an MTU mismatch
failure. This value is only applicable if the peer is
using the pseudowire status signalling method to indicate
faults."
::= { sdpBindEntry 28 }
sdpBindPeerVccvCvBits OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetection (2),
bfdFaultDetectionAndSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sdpBindPeerVccvCvBits indicates the CV type bits set by the
LDP peer if it supports VCCV (Virtual Circuit Connection
Verification) on a pseudowire. If the peer does not send
VCCV information, or does not support it, the bits will
be set to 0."
::= { sdpBindEntry 29 }
sdpBindPeerVccvCcBits OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
mplsRouterAlertLabel (1),
mplsPwDemultiplexorLabel (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sdpBindPeerVccvCcBits indicates the CC type bits set by the
LDP peer if it supports VCCV (Virtual Circuit Connection
Verification) on a pseudowire. If the peer does not send
VCCV information, or does not support it, the bits will
all be 0."
::= { sdpBindEntry 30 }
sdpBindControlWordBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sdpBindControlWordBit specifies whether the use of the
'ControlWord' is preferred or not. The value of
sdpBindControlWordBit is exchanged with LDP peer during
pseudowire negotiation time. The default value is
determined by sdpBindVcType. sdpBindVcType of atmSdu and
frDlci must have default value of 'true'. Other values of
sdpBindVcType must have default value of 'false'."
::= { sdpBindEntry 31 }
sdpBindOperControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sdpBindOperControlWord indicates whether the 'ControlWord'
is used or not. The value of sdpBindOperControlWord is
negotiated with the LDP peer. When both the local and the
peer prefer the use of the 'ControlWord', sdpBindOperControlWord
has the value of 'true'."
::= { sdpBindEntry 32 }
sdpBindEndPoint OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sdpBindEndPoint specifies the service endpoint to which
this SDP bind is attached. The svcId of the SDP bind MUST
match the svcId of the service endpoint."
DEFVAL { "" }
::= { sdpBindEntry 33 }
sdpBindEndPointPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sdpBindEndPointPrecedence specifies the precedence of this
SDP bind when there are multiple SDP binds attached to one
service endpoint. The value 0 can only be assigned to one
SDP bind, making it the primary SDP bind. When an SDP bind
goes down, the next highest precedence SDP bind begins
forwarding traffic."
DEFVAL { 4 }
::= { sdpBindEntry 34 }
sdpBindIsICB OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sdpBindIsICB specifies whether this sdpBind is an
inter-chassis backup SDP bind."
DEFVAL { false }
::= { sdpBindEntry 35 }
sdpBindPwFaultInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindPwFaultInetAddressType
indicates the address type of sdpBindPwFaultInetAddress."
::= { sdpBindEntry 36 }
sdpBindPwFaultInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindPwFaultInetAddress indicates the IP
address that was included in the pseudowire status
message sent by the LDP peer. This value is only
applicable if the peer is using the pseudowire status
signalling method to indicate faults."
::= { sdpBindEntry 37 }
sdpBindClassFwdingOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindClassFwdingOperState indicates the
operational state of forwarding-class based forwarding
on this sdpBind.
When the SDP this sdpBind is bound to has
sdpClassFwdingEnabled set to 'false', the value of
sdpBindClassFwdingOperState is 'outOfService'.
When the SDP this sdpBind is bound to has
sdpClassFwdingEnabled set to 'true' and the svcType
of the service this sdpBind is defined on is 'tls',
'vprn', or 'ies', the value of
sdpBindClassFwdingOperState is 'inService'. If the
service has svcVcSwitching set to 'true', the value
of sdpBindClassFwdingOperState is 'inService'
When the SDP this sdpBind is bound to has
sdpClassFwdingEnabled set to 'true' and the svcType
of the service this sdpBind is defined on is 'epipe',
'apipe', 'fpipe', or 'ipipe' with no SAP
defined on the service, the value of
sdpBindClassFwdingOperState is 'unknown'. If the
service has a SAP with a NULL
sapIngressSharedQueuePolicy, the value of
sdpBindClassFwdingOperState is 'outOfService'. If the
service has a SAP with a non-NULL
sapIngressSharedQueuePolicy, the value of
sdpBindClassFwdingOperState is 'inService'."
::= { sdpBindEntry 38 }
sdpBindForceVlanVcForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindForceVlanVcForwarding specifies whether or not
vc-vlan-type forwarding is forced in the data-path for the sdp which
have sdpBindVcType set to 'ether'. When set to 'true'
vc-vlan-type forwarding is forced.
An 'inconsistentValue' error is returned when an attempt is made to set
the value of sdpBindForceVlanVcForwarding to 'true' and sdpBindVcType is
not set to 'ether'."
DEFVAL { false }
::= { sdpBindEntry 39 }
sdpBindAdminBandwidth OBJECT-TYPE
SYNTAX SdpBindBandwidth
UNITS "kilo-bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sdpBindAdminBandwidth specifies the
bandwidth that needs to be reserved for this SDP binding in
kilo-bits per second. The SdpBindBandwidth object only applies
to the SDP bindings under the epipe(1), apipe(7), fpipe(8),
ipipe(9) and cpipe(10) services."
DEFVAL { 0 }
::= { sdpBindEntry 40 }
sdpBindOperBandwidth OBJECT-TYPE
SYNTAX SdpBindBandwidth
UNITS "kilo-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindOperBandwidth indicates the
bandwidth that has been reserved for this SDP binding in
kilo-bits per second. The value 0 indicates that SDP doesn't
have bandwidth to satisfy the bandwidth requirement of this
SDP binding. The sdpBindOperBandwidth object only applies
to the SDP bindings under the epipe(1), apipe(7), fpipe(8),
ipipe(9) and cpipe(10) services."
::= { sdpBindEntry 41 }
-- ----------------------------------
-- Base SDP Binding Statistics Table
-- ----------------------------------
sdpBindBaseStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic SDP Binding
statistics."
::= { tmnxSdpObjs 5 }
sdpBindBaseStatsEntry OBJECT-TYPE
SYNTAX SdpBindBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Basic statistics about a specific SDP
Binding."
INDEX { svcId, sdpBindId }
::= { sdpBindBaseStatsTable 1 }
SdpBindBaseStatsEntry ::=
SEQUENCE {
sdpBindBaseStatsIngressForwardedPackets Counter64,
sdpBindBaseStatsIngressDroppedPackets Counter64,
sdpBindBaseStatsEgressForwardedPackets Counter64,
sdpBindBaseStatsEgressForwardedOctets Counter64,
sdpBindBaseStatsCustId TmnxCustId,
sdpBindBaseStatsIngFwdOctets Counter64,
sdpBindBaseStatsIngDropOctets Counter64
}
sdpBindBaseStatsIngressForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 1 }
sdpBindBaseStatsIngressDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 2 }
sdpBindBaseStatsEgressForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 3 }
sdpBindBaseStatsEgressForwardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 4 }
sdpBindBaseStatsCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID of the associated service."
::= { sdpBindBaseStatsEntry 5 }
sdpBindBaseStatsIngFwdOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 6 }
sdpBindBaseStatsIngDropOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { sdpBindBaseStatsEntry 7 }
-- ------------------------------------------
-- TLS SDP Bind Table
-- ------------------------------------------
sdpBindTlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains TLS spoke SDP Bind
information."
::= { tmnxSdpObjs 6 }
sdpBindTlsEntry OBJECT-TYPE
SYNTAX SdpBindTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TLS specific information about an SDP Bind."
INDEX { svcId, sdpBindId }
::= { sdpBindTlsTable 1 }
SdpBindTlsEntry ::=
SEQUENCE {
sdpBindTlsStpAdminStatus TmnxEnabledDisabled,
sdpBindTlsStpPriority INTEGER,
sdpBindTlsStpPortNum INTEGER,
sdpBindTlsStpPathCost INTEGER,
sdpBindTlsStpRapidStart TmnxEnabledDisabled,
sdpBindTlsStpBpduEncap INTEGER,
sdpBindTlsStpPortState TStpPortState,
sdpBindTlsStpDesignatedBridge BridgeId,
sdpBindTlsStpDesignatedPort Integer32,
sdpBindTlsStpForwardTransitions Gauge32,
sdpBindTlsStpInConfigBpdus Gauge32,
sdpBindTlsStpInTcnBpdus Gauge32,
sdpBindTlsStpInBadBpdus Gauge32,
sdpBindTlsStpOutConfigBpdus Gauge32,
sdpBindTlsStpOutTcnBpdus Gauge32,
sdpBindTlsStpOperBpduEncap INTEGER,
sdpBindTlsStpVpnId VpnId,
sdpBindTlsStpCustId TmnxCustId,
sdpBindTlsMacAddressLimit Integer32,
sdpBindTlsNumMacAddresses Integer32,
sdpBindTlsNumStaticMacAddresses Integer32,
sdpBindTlsMacLearning TmnxEnabledDisabled,
sdpBindTlsMacAgeing TmnxEnabledDisabled,
sdpBindTlsStpOperEdge TruthValue,
sdpBindTlsStpAdminPointToPoint INTEGER,
sdpBindTlsStpPortRole StpPortRole,
sdpBindTlsStpAutoEdge TmnxEnabledDisabled,
sdpBindTlsStpOperProtocol StpProtocol,
sdpBindTlsStpInRstBpdus Gauge32,
sdpBindTlsStpOutRstBpdus Gauge32,
sdpBindTlsLimitMacMove TlsLimitMacMove,
sdpBindTlsDiscardUnknownSource TmnxEnabledDisabled,
sdpBindTlsMvplsPruneState MvplsPruneState,
sdpBindTlsMvplsMgmtService TmnxServId,
sdpBindTlsMvplsMgmtSdpBndId SdpBindId,
sdpBindTlsStpException StpExceptionCondition,
sdpBindTlsL2ptTermination TmnxEnabledDisabled,
sdpBindTlsBpduTranslation SdpBindTlsBpduTranslation,
sdpBindTlsStpRootGuard TruthValue,
sdpBindTlsStpInMstBpdus Gauge32,
sdpBindTlsStpOutMstBpdus Gauge32,
sdpBindTlsStpRxdDesigBridge BridgeId,
sdpBindTlsMacMoveNextUpTime Unsigned32,
sdpBindTlsMacMoveRateExcdLeft Unsigned32,
sdpBindTlsLimitMacMoveLevel TlsLimitMacMoveLevel,
sdpBindTlsBpduTransOper INTEGER,
sdpBindTlsL2ptProtocols L2ptProtocols,
sdpBindTlsIgnoreStandbySig TruthValue,
sdpBindTlsBlockOnMeshFail TruthValue
}
sdpBindTlsStpAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpAdminStatus specifies
whether this SDP Bind participates in the TLS's Spanning
Tree Protocol."
DEFVAL { enabled }
::= { sdpBindTlsEntry 1 }
sdpBindTlsStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpPriority specifies
the value of the port priority field which is contained
in the most significant 4 bits of the 16-bit Port ID
associated with this SDP Bind. As only the most
significant 4 bits of the value are used, the
actual value of this object is limited to
multiples of 16: e.g. the agent rounds down
the value to one of: 0, 16, 32, .. , 224, 240."
DEFVAL { 128 }
::= { sdpBindTlsEntry 2 }
sdpBindTlsStpPortNum OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpPortNum specifies
the value of the port number field which is contained in
the least significant 12 bits of the 16-bit Port ID
associated with this SDP Bind.
Values in the range 2048..4094 are automatically
assigned by the agent when the SDP Bind is created or
when the value of this object is set to zero via
management. Values in the range 1..2047 can be set
via management, to allow this object to have a
deterministic value across system reboots."
::= { sdpBindTlsEntry 3 }
sdpBindTlsStpPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpPathCost specifies
the contribution of this port to the path cost of paths
towards the spanning tree root which include this port."
DEFVAL { 10 }
::= { sdpBindTlsEntry 4 }
sdpBindTlsStpRapidStart OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpRapidStart
specifies whether Rapid Start is enabled on this SDP Bind.
When the value is 'enabled' the Spanning Tree Protocol
state transitions on this SDP Bind are driven by the value
of the 'HelloTime', instead of the value of 'ForwardDelay',
thus allowing a faster transition into the forwarding
state."
DEFVAL { disabled }
::= { sdpBindTlsEntry 5 }
sdpBindTlsStpBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
dot1d (2),
pvst (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpBpduEncap
specifies the type of encapsulation used on BPDUs sent out
and received on this SDP Bind."
DEFVAL { dynamic }
::= { sdpBindTlsEntry 6 }
sdpBindTlsStpPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpPortState indicates
the port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge has
detected a port that is malfunctioning it will
place that port into the 'broken' state. All possible
states are: learning, forwarding, broken, and discarding."
::= { sdpBindTlsEntry 7 }
sdpBindTlsStpDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment."
::= { sdpBindTlsEntry 8 }
sdpBindTlsStpDesignatedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpDesignatedPort
indicates the Port Identifier of the port on the
Designated Bridge for this port's segment."
::= { sdpBindTlsEntry 9 }
sdpBindTlsStpForwardTransitions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { sdpBindTlsEntry 10 }
sdpBindTlsStpInConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpInConfigBpdus
indicates the number of Configuration BPDUs received on
this SDP Bind."
::= { sdpBindTlsEntry 11 }
sdpBindTlsStpInTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpInTcnBpdus
indicates the number of Topology
Change Notification BPDUs received on this SDP Bind."
::= { sdpBindTlsEntry 12 }
sdpBindTlsStpInBadBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpInBadBpdus indicates
the number of bad BPDUs received on this SDP Bind."
::= { sdpBindTlsEntry 13 }
sdpBindTlsStpOutConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOutConfigBpdus
indicates the number of Configuration BPDUs sent out this
SDP Bind."
::= { sdpBindTlsEntry 14 }
sdpBindTlsStpOutTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOutTcnBpdus
indicates the number of Topology Change Notification BPDUs
sent out this SDP Bind."
::= { sdpBindTlsEntry 15 }
sdpBindTlsStpOperBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dot1d (2),
pvst (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOperBpduEncap
indicates the operating encapsulation type used on BPDUs
sent out and received on this SDP Bind."
::= { sdpBindTlsEntry 16 }
sdpBindTlsStpVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpVpnId indicates the
VPN ID of the associated service."
::= { sdpBindTlsEntry 17 }
sdpBindTlsStpCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpCustId indicates the
Customer ID of the associated service."
::= { sdpBindTlsEntry 18 }
sdpBindTlsMacAddressLimit OBJECT-TYPE
SYNTAX Integer32(0..196607)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMacAddressLimit
specifies the maximum number of learned and static entries
allowed in the FDB for this SDP Bind. The value 0
means: no limit for this SDP Bind. The command is valid
only for spoke SDPs. When the value of
ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the
maximum value of sdpBindTlsMacAddressLimit is '131071'."
DEFVAL { 0 }
::= { sdpBindTlsEntry 19 }
sdpBindTlsNumMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsNumMacAddresses
indicates the number of MAC addresses currently present
in the FDB that belong to this SDP Bind (Both learned
and static MAC addresses are counted)."
::= { sdpBindTlsEntry 20 }
sdpBindTlsNumStaticMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SDP Bind."
::= { sdpBindTlsEntry 21 }
sdpBindTlsMacLearning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMacLearning specifies
whether the MAC learning process is enabled for this SDP
Bind. The value is ignored if MAC learning is disabled on
service level."
DEFVAL { enabled }
::= { sdpBindTlsEntry 22 }
sdpBindTlsMacAgeing OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMacAgeing specifies
whether the MAC aging process is enabled for this
SDP Bind. the value is ignored if MAC aging is disabled
on service level."
DEFVAL { enabled }
::= { sdpBindTlsEntry 23 }
sdpBindTlsStpOperEdge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOperEdge indicates
the operational value of the Edge Port parameter.
The object is initialized to the value of
sdpBindTlsStpRapidStart and is set FALSE on reception of a
BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { sdpBindTlsEntry 24 }
sdpBindTlsStpAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue (0),
forceFalse (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object xx sdpBindTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sdp.
A value of 'forceTrue' indicates that this port should
always be treated as if it is connected to a
point-to-point link.
A value of 'forceFalse' indicates that this port should
be treated as having a shared media connection."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
DEFVAL { forceTrue }
::= { sdpBindTlsEntry 25 }
sdpBindTlsStpPortRole OBJECT-TYPE
SYNTAX StpPortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpPortRole indicates
the current role of the sdp as defined by the Rapid
Spanning Tree Protocol."
::= { sdpBindTlsEntry 26 }
sdpBindTlsStpAutoEdge OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpAutoEdge specifies
whether this SDP is enabled for auto-edge detection as
defined by Rapid Spanning Tree Protocol."
DEFVAL { enabled }
::= { sdpBindTlsEntry 27 }
sdpBindTlsStpOperProtocol OBJECT-TYPE
SYNTAX StpProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOperProtocol
indicates whether stp, rstp or mstp is running on this
spoke sdp. If the protocol is not enabled on this
spoke-sdp the value notApplicable is returned."
::= { sdpBindTlsEntry 28 }
sdpBindTlsStpInRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (Rst) BPDUs received on
this SDP."
::= { sdpBindTlsEntry 29 }
sdpBindTlsStpOutRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (Rstp) BPDUs sent out on
this SDP."
::= { sdpBindTlsEntry 30 }
sdpBindTlsLimitMacMove OBJECT-TYPE
SYNTAX TlsLimitMacMove
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When sdpBindTlsLimitMacMove value is set to blockable
(1) the agent will monitor the MAC relearn rate on this
SDP Bind, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When the
value is 'nonBlockable' this SDP binding will not be
blocked, and another blockable SDP binding will be
blocked instead."
DEFVAL { blockable }
::= { sdpBindTlsEntry 31 }
sdpBindTlsDiscardUnknownSource OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "With the object sdpBindTlsMacAddressLimit a limit can
be configured for the max number of MAC addresses that
will be learned on this SDP Bind (only for spoke
SDPs). When this limit is reached, packets with
unknown source MAC address are forwarded by default.
By setting sdpBindTlsDiscardUnknownSource to enabled,
packets with unknown source MAC will be dropped in
stead."
DEFVAL { disabled }
::= { sdpBindTlsEntry 32 }
sdpBindTlsMvplsPruneState OBJECT-TYPE
SYNTAX MvplsPruneState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMvplsPruneState
indicates the mVPLS prune state of the spoke SDP. The
object will be set to notApplicable if the spoke SDP is
not managed by a mVPLS. If the SDP is managed the state
reflects whether or not it is pruned by the STP instance
running in the mVPLS instance."
::= { sdpBindTlsEntry 33 }
sdpBindTlsMvplsMgmtService OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMvplsMgmtService
indicates the service Id of the service where the STP
instance is running that is managing this spoke SDP. This
object is only valid if sdpBindTlsMvplsPruneState is
different from notApplicable."
::= { sdpBindTlsEntry 34 }
sdpBindTlsMvplsMgmtSdpBndId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMvplsMgmtSdpBndId
indicates the SDP bind id in the mVPLS instance specified
in sdpBindTlsMvplsMgmtService that is controlling this
SDP. This object is only valid if
sdpBindTlsMvplsPruneState is different from
notApplicable."
::= { sdpBindTlsEntry 35 }
sdpBindTlsStpException OBJECT-TYPE
SYNTAX StpExceptionCondition
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpException indicates
whether an STP exception condition is present on this
Spoke Sdp.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
is not able to detect our presence.
- downstreamLoopDetected :A loop is detected on this link."
::= { sdpBindTlsEntry 36 }
sdpBindTlsL2ptTermination OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsL2ptTermination
specifies whether received L2 Protocol Tunnel pdu's are
terminated on this port or sdp"
DEFVAL { disabled }
::= { sdpBindTlsEntry 37 }
sdpBindTlsBpduTranslation OBJECT-TYPE
SYNTAX SdpBindTlsBpduTranslation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsBpduTranslation
specifies whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or sap"
DEFVAL { disabled }
::= { sdpBindTlsEntry 38 }
sdpBindTlsStpRootGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connectivity."
DEFVAL { false }
::= { sdpBindTlsEntry 39 }
sdpBindTlsStpInMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (Mst) BPDUs received
on this SDP."
::= { sdpBindTlsEntry 40 }
sdpBindTlsStpOutMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (Mst) BPDUs sent out
on this SDP."
::= { sdpBindTlsEntry 41 }
sdpBindTlsStpRxdDesigBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SDP."
::= { sdpBindTlsEntry 42 }
sdpBindTlsMacMoveNextUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsMacMoveNextUpTime
counts down the time in seconds until a SDP bind that
has been brought down due to exceeding the TLS
svcTlsMacMoveMaxRate, sdpBindOperFlags
'relearnLimitExceeded', is automatically brought up again.
When this value is 0xffff, the SDP bind will never be
automatically brought up. The value is zero when
sdpBindOperStatus is 'up'."
::= { sdpBindTlsEntry 43 }
sdpBindTlsMacMoveRateExcdLeft OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMacMoveRateExcdLeft
counts down the number of times this SDP bind can exceed
the TLS svcTlsMacMoveMaxRate and still be automatically
brought up."
::= { sdpBindTlsEntry 44 }
sdpBindTlsLimitMacMoveLevel OBJECT-TYPE
SYNTAX TlsLimitMacMoveLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsLimitMacMoveLevel
specifies the hierarchy in which spoke-SDPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)"
DEFVAL { tertiary }
::= { sdpBindTlsEntry 45 }
sdpBindTlsBpduTransOper OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
disabled (2),
pvst (3),
stp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindTlsBpduTransOper indicates
the operational BPDU encapsulation used for BPDU
translated frames."
::= { sdpBindTlsEntry 46 }
sdpBindTlsL2ptProtocols OBJECT-TYPE
SYNTAX L2ptProtocols
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindTlsL2ptTermination
specifies which L2 Protocol Tunnel pdu's are
terminated on this port or sdp"
DEFVAL { { stp } }
::= { sdpBindTlsEntry 47 }
sdpBindTlsIgnoreStandbySig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsIgnoreStandbySig specifies whether
the local internal tasks will take into account the
'pseudo-wire forwarding standby' bit received from the LDP
peer which is normally ignored.
When set to 'true', this bit is not considered in the
internal tasks.
A similar object svcEndPointIgnoreStandbySig is present at
the endpoint level. If this spoke-SDP is part of that
explicit endpoint, this object will be set to the value of
svcEndPointIgnoreStandbySig and its value will not allowed
to be changed.
This spoke-SDP can be made part of an explicit-endpoint
only if the setting of this object is not conflicting with
the setting of svcEndPointIgnoreStandbySig object."
DEFVAL { false }
::= { sdpBindTlsEntry 48 }
sdpBindTlsBlockOnMeshFail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsBlockOnMeshFail specifies that the
operational status of this spoke SDP will consider
operational status of associated mesh SDPs in this service.
If there are no mesh SDPs in the service, value of this
object is ignored.
When this object is set to 'true', then the operational
status of this spoke SDP will be 'down' until the
operational status of atleast one mesh SDP in this service
is 'up'.
When set to 'false', the operational status of this spoke
SDP does not consider the operational status of any mesh
SDPs in the service."
DEFVAL { false }
::= { sdpBindTlsEntry 49 }
-- ------------------------------------------
-- TLS Mesh SDP Bind Table
-- ------------------------------------------
sdpBindMeshTlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindMeshTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains TLS Mesh SDP Bind
information."
::= { tmnxSdpObjs 7 }
sdpBindMeshTlsEntry OBJECT-TYPE
SYNTAX SdpBindMeshTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TLS specific information about an Mesh SDP Bind."
INDEX { svcId, sdpBindId }
::= { sdpBindMeshTlsTable 1 }
SdpBindMeshTlsEntry ::=
SEQUENCE {
sdpBindMeshTlsPortState TStpPortState,
sdpBindMeshTlsHoldDownTimer INTEGER,
sdpBindMeshTlsTransitionState INTEGER,
sdpBindMeshTlsNotInMstRegion TruthValue
}
sdpBindMeshTlsPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the actual state of the Mesh SDP. If
the sdp is operationally down, the port will be in the
'disabled' state. If the sdp is operationally up, the
state will be 'forwarding' unless the hold-down timer is
active in which case the state will be 'discarding'."
::= { sdpBindMeshTlsEntry 1 }
sdpBindMeshTlsHoldDownTimer OBJECT-TYPE
SYNTAX INTEGER {
not-active (1),
active (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When the hold-down timer is active, all traffic coming
from this mesh sdp will be blocked. This timer will be
activated for any of the following cases:
1. when a mesh SDP becomes operational;
2. when a 'disputed' BPDU is received over this mesh sdp;
This is typically a symptom of one way communication
(the peer at the other side of the mesh sdp does not
receive our BPDUs).
3. when a MSTP BPDU from outside the region is received
over this mesh SDP."
::= { sdpBindMeshTlsEntry 2 }
sdpBindMeshTlsTransitionState OBJECT-TYPE
SYNTAX INTEGER {
not-applicable (1),
waiting-for-agreement (2),
agreement-received (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether we already received an
agreement from the peer connected via this mesh sdp. RSTP
expects an agreement from every peer after sending a
proposal over the VCP when it wants to transition the latter
to the forwarding state. This object is only relevant when
the role of the VCP is 'designated'. Not receiving an
agreement is typically caused by an improperly configured
sdp or by a non rstp enabled peer."
::= { sdpBindMeshTlsEntry 3 }
sdpBindMeshTlsNotInMstRegion OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object sdpBindMeshTlsNotInMstRegion indicates whether
we received a BPDU from another MST-region on this mesh
SDP.
If set to 'true' then the object sdpBindMeshTlsHoldDownTimer
will have the value 'active'.
It is up to the operator to make sure bridges connected
via mesh SDPs are in the same MST-region. If not the mesh
will NOT become operational."
::= { sdpBindMeshTlsEntry 4 }
-- ------------------------------------
-- APIPE SDP Bind Table
-- ------------------------------------
sdpBindApipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindApipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpBindApipeTable has an entry for each apipe sdpBind
configured on this system."
::= { tmnxSdpObjs 8 }
sdpBindApipeEntry OBJECT-TYPE
SYNTAX SdpBindApipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a particular sdpBind related to a
particular Apipe service entry. Entries are created/deleted
by the user."
INDEX { svcId, sdpBindId }
::= { sdpBindApipeTable 1 }
SdpBindApipeEntry ::=
SEQUENCE {
sdpBindApipeAdminConcatCellCount Integer32,
sdpBindApipeSigConcatCellCount Integer32,
sdpBindApipeOperConcatCellCount Integer32,
sdpBindApipeConcatMaxDelay Integer32,
sdpBindApipeConcatCellClp TruthValue,
sdpBindApipeConcatCellAal5Fr TruthValue
}
sdpBindApipeAdminConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindApipeAdminConcatCellCount specifies
the maximum number of ATM cells to accumulate
into an MPLS packet. The remote peer will also signal the
maximum number of concatenated cells it is willing to
accept in an MPLS packet. When the lesser of (the
configured value and the signaled value) number of cells
is reached, the MPLS packet is queued for transmission
onto the pseudowire."
DEFVAL { 1 }
::= { sdpBindApipeEntry 1 }
sdpBindApipeSigConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindApipeSigConcatCellCount indicates the
maximum number of concatenated ATM cells the remote peer
is willing to accept. If there is no remote peer, or if
the label mapping has not been received, this object will
be zero (0)."
::= { sdpBindApipeEntry 2 }
sdpBindApipeOperConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindApipeOperConcatCellCount indicates the
maximum number of concatenated ATM cells that will be sent
on this SDP binding."
::= { sdpBindApipeEntry 3 }
sdpBindApipeConcatMaxDelay OBJECT-TYPE
SYNTAX Integer32 (1..400)
UNITS "hundreds of microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindApipeConcatMaxDelay object specifies
the maximum amount of time to wait while
performing ATM cell concatenation into an MPLS packet
before transmitting the MPLS packet. This places an upper
bound on the amount of delay introduced by the
concatenation process.
When this amount of time is reached from when the first
ATM cell for this MPLS packet was received, the MPLS
packet is queued for transmission onto the pseudowire."
DEFVAL { 400 }
::= { sdpBindApipeEntry 4 }
sdpBindApipeConcatCellClp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindApipeConcatCellClp specifies whether
a CLP change should be used as an indication to complete
the cell concatenation operation. When the value is 'true',
CLP is used to indicate that cell concatenation should
be completed."
DEFVAL { false }
::= { sdpBindApipeEntry 5 }
sdpBindApipeConcatCellAal5Fr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindApipeConcatCellAal5Fr specifies
whether the AAL5 EOP (end of packet) should be used as an
indication to complete the cell concatenation operation.
When the value is 'true', EOP is used to indicate that
cell concatenation should be completed."
DEFVAL { false }
::= { sdpBindApipeEntry 6 }
-- ------------------------------------
-- SDP Bind DHCP Information Table
-- ------------------------------------
sdpBindDhcpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains DHCP information related to a
SDP Bind.
A row will exist in this table for each spoke or
mesh SDP in a Tls Service. Rows are created and deleted
automatically by the system."
::= { tmnxSdpObjs 9 }
sdpBindDhcpInfoEntry OBJECT-TYPE
SYNTAX SdpBindDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP specific information about an SDP Bind."
INDEX { svcId, sdpBindId }
::= { sdpBindDhcpInfoTable 1 }
SdpBindDhcpInfoEntry ::=
SEQUENCE {
sdpBindDhcpDescription ServObjDesc,
sdpBindDhcpSnoop TmnxEnabledDisabled
}
sdpBindDhcpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpDescription specifies
a user provided description for DHCP on this Sdp Bind."
DEFVAL { ''H }
::= { sdpBindDhcpInfoEntry 1 }
sdpBindDhcpSnoop OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpSnoop specifies
whether or not DHCP snooping is enabled on the Sdp Bind."
DEFVAL { disabled }
::= { sdpBindDhcpInfoEntry 2 }
-- ------------------------------------
-- SDP Bind DHCP Stats Table
-- ------------------------------------
sdpBindDhcpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sdpBindDhcpStatsTable contains DHCP statistics related
to a TLS SDP Bind. A row will exist in this table for
each spoke or mesh SDP in a Tls Service. Rows are
created and deleted automatically by the system."
::= { tmnxSdpObjs 10 }
sdpBindDhcpStatsEntry OBJECT-TYPE
SYNTAX SdpBindDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP statistics for a TLS spoke SDP or mesh SDP."
INDEX { svcId, sdpBindId }
::= { sdpBindDhcpStatsTable 1 }
SdpBindDhcpStatsEntry ::=
SEQUENCE {
sdpBindDhcpStatsClntSnoopdPckts Counter32,
sdpBindDhcpStatsSrvrSnoopdPckts Counter32,
sdpBindDhcpStatsClntForwdPckts Counter32,
sdpBindDhcpStatsSrvrForwdPckts Counter32,
sdpBindDhcpStatsClntDropdPckts Counter32,
sdpBindDhcpStatsSrvrDropdPckts Counter32,
sdpBindDhcpStatsClntProxRadPckts Counter32,
sdpBindDhcpStatsClntProxLSPckts Counter32,
sdpBindDhcpStatsGenReleasePckts Counter32,
sdpBindDhcpStatsGenForceRenPckts Counter32
}
sdpBindDhcpStatsClntSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsClntSnoopdPckts
indicates the number of DHCP client packets that have
been snooped on this SDP bind."
::= { sdpBindDhcpStatsEntry 1 }
sdpBindDhcpStatsSrvrSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrSnoopdPckts
indicates the number of DHCP server packets that have
been snooped on this SDP bind."
::= { sdpBindDhcpStatsEntry 2 }
sdpBindDhcpStatsClntForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsClntForwdPckts
indicates the number of DHCP client packets that have
been forwarded on this SDP bind."
::= { sdpBindDhcpStatsEntry 3 }
sdpBindDhcpStatsSrvrForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrForwdPckts
indicates the number of DHCP server packets that have
been forwarded on this SDP bind."
::= { sdpBindDhcpStatsEntry 4 }
sdpBindDhcpStatsClntDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsClntDropdPckts
indicates the number of DHCP client packets that have
been dropped on this SDP bind."
::= { sdpBindDhcpStatsEntry 5 }
sdpBindDhcpStatsSrvrDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrDropdPckts
indicates the number of DHCP server packets that have
been dropped on this SDP bind."
::= { sdpBindDhcpStatsEntry 6 }
sdpBindDhcpStatsClntProxRadPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsClntProxRadPckts
indicates the number of DHCP client packets that have
been proxied on this SDP bind based on data received from
a RADIUS server."
::= { sdpBindDhcpStatsEntry 7 }
sdpBindDhcpStatsClntProxLSPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsClntProxLSPckts
indicates the number of DHCP client packets that have
been proxied on this SDP bind based on a lease state. The
lease itself can have been obtained from a DHCP or RADIUS
server. This is the so called lease split functionality."
::= { sdpBindDhcpStatsEntry 8 }
sdpBindDhcpStatsGenReleasePckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsGenReleasePckts
indicates the number of DHCP RELEASE messages spoofed on
this SDP bind to the DHCP server."
::= { sdpBindDhcpStatsEntry 9 }
sdpBindDhcpStatsGenForceRenPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sdpBindDhcpStatsGenForceRenPckts
indicates the number of DHCP FORCERENEW messages spoofed
on this SDP bind to the DHCP clients."
::= { sdpBindDhcpStatsEntry 10 }
-- ------------------------------------
-- IPIPE SDP Bind Table
-- ------------------------------------
sdpBindIpipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindIpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpBindIpipeTable has an entry for each IPIPE sdpBind
configured on this system."
::= { tmnxSdpObjs 11 }
sdpBindIpipeEntry OBJECT-TYPE
SYNTAX SdpBindIpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a particular sdpBind related to a
particular IPIPE service entry. Entries are created/deleted
by the user."
INDEX { svcId, sdpBindId }
::= { sdpBindIpipeTable 1 }
SdpBindIpipeEntry ::=
SEQUENCE {
sdpBindIpipeCeInetAddressType InetAddressType,
sdpBindIpipeCeInetAddress InetAddress
}
sdpBindIpipeCeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sdpBindIpipeCeInetAddressType
specifies the addresstype of the IP address of the CE
device reachable throught this IPIPE SDP binding."
::= { sdpBindIpipeEntry 1 }
sdpBindIpipeCeInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of this address is determined by the value of
the sdpBindIpipeCeInetAddressType object.
This object specifies the IPv4 address of the
CE device reachable through this SDP binding."
::= { sdpBindIpipeEntry 2 }
-- --------------------------------------------
-- SDP Egress forwarding-class mapping table
-- --------------------------------------------
sdpFCMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpFCMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpFCMappingTable has an entry for each FC mapping
on an SDP configured on this system."
::= { tmnxSdpObjs 12 }
sdpFCMappingEntry OBJECT-TYPE
SYNTAX SdpFCMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a particular FC to LSP ID
mapping on an SDP. Entries are created/deleted by
the user."
INDEX { sdpId, sdpFCMappingFCName }
::= { sdpFCMappingTable 1 }
SdpFCMappingEntry ::=
SEQUENCE {
sdpFCMappingFCName TNamedItem,
sdpFCMappingRowStatus RowStatus,
sdpFCMappingLspId TmnxVRtrMplsLspID
}
sdpFCMappingFCName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sdpFCMappingFCName specifies the forwarding
class for which this mapping is defined, in the SDP
indexed by 'sdpId'."
::= { sdpFCMappingEntry 1 }
sdpFCMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpFCMappingRowStatus is used for the
creation and deletion of forwarding class to LSP
mappings."
::= { sdpFCMappingEntry 2 }
sdpFCMappingLspId OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpFCMappingLspId specifies the LSP ID that
traffic corresponding to the class specified in
sdpFCMappingFCName will be forwarded on. This object MUST
be specified at row creation time."
::= { sdpFCMappingEntry 3 }
-- ------------------------------------
-- CPIPE SDP Bind Table
-- ------------------------------------
sdpBindCpipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindCpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpBindCpipeTable has an entry for each cpipe sdpBind
configured on this system."
::= { tmnxSdpObjs 15 }
sdpBindCpipeEntry OBJECT-TYPE
SYNTAX SdpBindCpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a particular sdpBind related to a
particular Cpipe service entry. Entries are created/deleted
by the user."
INDEX { svcId, sdpBindId }
::= { sdpBindCpipeTable 1 }
SdpBindCpipeEntry ::=
SEQUENCE {
sdpBindCpipeLocalPayloadSize Unsigned32,
sdpBindCpipePeerPayloadSize Unsigned32,
sdpBindCpipeLocalBitrate Unsigned32,
sdpBindCpipePeerBitrate Unsigned32,
sdpBindCpipeLocalSigPkts TdmOptionsSigPkts,
sdpBindCpipePeerSigPkts TdmOptionsSigPkts,
sdpBindCpipeLocalCasTrunkFraming TdmOptionsCasTrunkFraming,
sdpBindCpipePeerCasTrunkFraming TdmOptionsCasTrunkFraming,
sdpBindCpipeLocalUseRtpHeader TruthValue,
sdpBindCpipePeerUseRtpHeader TruthValue,
sdpBindCpipeLocalDifferential TruthValue,
sdpBindCpipePeerDifferential TruthValue,
sdpBindCpipeLocalTimestampFreq Unsigned32,
sdpBindCpipePeerTimestampFreq Unsigned32
}
sdpBindCpipeLocalPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the local payload size (in bytes)."
::= { sdpBindCpipeEntry 1 }
sdpBindCpipePeerPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the remote payload size (in bytes).
If there is no remote peer, or if the label mapping has
not been received, or if this value has not been received
from the remote peer then this object will be zero (0)."
::= { sdpBindCpipeEntry 2 }
sdpBindCpipeLocalBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "64 Kbits/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the local bit-rate in multiples of
64 Kbit/s."
::= { sdpBindCpipeEntry 3 }
sdpBindCpipePeerBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "64 Kbits/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the remote bit-rate in multiples of
64 Kbit/s.
If there is no remote peer, or if the label mapping has
not been received, or if this value has not been received
from the remote peer then this object will be zero (0)."
::= { sdpBindCpipeEntry 4 }
sdpBindCpipeLocalSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the local CE application signalling
packets mode."
::= { sdpBindCpipeEntry 5 }
sdpBindCpipePeerSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the remote CE application signalling
packets mode.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
signalling packets then this object will be zero (0)."
::= { sdpBindCpipeEntry 6 }
sdpBindCpipeLocalCasTrunkFraming OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the local CAS trunk framing mode."
::= { sdpBindCpipeEntry 7 }
sdpBindCpipePeerCasTrunkFraming OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the remote CAS trunk framing mode.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
CAS trunk framing then this object will be zero (0)."
::= { sdpBindCpipeEntry 8 }
sdpBindCpipeLocalUseRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether a RTP header is used
when packets are transmitted to the remote peer, and
the local peer expects a RTP header when packets are
received from the remote peer."
::= { sdpBindCpipeEntry 9 }
sdpBindCpipePeerUseRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether a RTP header is used
when packets are transmitted by the remote peer, and
the remote peer expects a RTP header when packets are
received from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
RTP headers then this object will be 'false'."
::= { sdpBindCpipeEntry 10 }
sdpBindCpipeLocalDifferential OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether differential timestamp
mode is used in the RTP header when packets are
transmitted to the remote peer, and the local peer expects
differential timestamps in the RTP header when packets are
received from the remote peer."
::= { sdpBindCpipeEntry 11 }
sdpBindCpipePeerDifferential OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether differential timestamp mode
is used in the RTP header when packets are transmitted by
the remote peer, and the remote peer expects differential
timestamps in the RTP header when packets are received
from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
differential timestamp mode then this object will be
'false'."
::= { sdpBindCpipeEntry 12 }
sdpBindCpipeLocalTimestampFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the timestamp frequency used
in the RTP header when packets are transmitted to the
remote peer, and the local peer expects same timestamp
frequency in the RTP header when packets are received
from the remote peer.
This value is in multiples of 8 KHz."
::= { sdpBindCpipeEntry 13 }
sdpBindCpipePeerTimestampFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the timestamp frequency used in
the RTP header when packets are transmitted by the remote
peer, and the remote peer expects the same timestamp
frequency in the RTP header when packets are received
from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
support RTP headers then this object will be zero (0).
This value is in multiples of 8 KHz."
::= { sdpBindCpipeEntry 14 }
-- --------------------------------------------
-- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table
-- --------------------------------------------
sdpBindTlsMfibAllowedMdaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpBindTlsMfibAllowedMdaTable has an entry for each
MFIB allowed MDA destination for an SDP Binding configured
in the system."
::= { tmnxSdpObjs 13 }
sdpBindTlsMfibAllowedMdaEntry OBJECT-TYPE
SYNTAX SdpBindTlsMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents an MFIB allowed MDA destination
for an SDP Binding configured in the system. Entries can
be created and deleted via SNMP SET operations on the
object sdpBindTlsMfibMdaRowStatus."
INDEX { svcId,
sdpBindId,
tmnxChassisIndex,
tmnxCardSlotNum,
tmnxMDASlotNum }
::= { sdpBindTlsMfibAllowedMdaTable 1 }
SdpBindTlsMfibAllowedMdaEntry ::=
SEQUENCE {
sdpBindTlsMfibMdaRowStatus RowStatus
}
sdpBindTlsMfibMdaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sdpBindTlsMfibMdaRowStatus controls the
creation and deletion of rows in this table."
::= { sdpBindTlsMfibAllowedMdaEntry 1 }
-- ------------------------------------------
-- SDP Bind TLS L2PT Statistics Table
-- ------------------------------------------
sdpBindTlsL2ptStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains TLS spoke SDP Bind
Layer 2 Protocol Tunneling Statistics.
This table complements the sdpBindTlsTable. Rows in this
table are created and deleted automatically by the
system."
::= { tmnxSdpObjs 16 }
sdpBindTlsL2ptStatsEntry OBJECT-TYPE
SYNTAX SdpBindTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TLS specific information about an SDP Bind."
INDEX { svcId, sdpBindId }
::= { sdpBindTlsL2ptStatsTable 1 }
SdpBindTlsL2ptStatsEntry ::=
SEQUENCE {
sdpBindTlsL2ptStatsLastClearedTime TimeStamp,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsStpConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsStpConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsStpRstBpdusRx Counter32,
sdpBindTlsL2ptStatsStpRstBpdusTx Counter32,
sdpBindTlsL2ptStatsStpTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsStpTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstRstBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstRstBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherL2ptBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherL2ptBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherInvalidBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherInvalidBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32,
sdpBindTlsL2ptStatsCdpBpdusRx Counter32,
sdpBindTlsL2ptStatsCdpBpdusTx Counter32,
sdpBindTlsL2ptStatsVtpBpdusRx Counter32,
sdpBindTlsL2ptStatsVtpBpdusTx Counter32,
sdpBindTlsL2ptStatsDtpBpdusRx Counter32,
sdpBindTlsL2ptStatsDtpBpdusTx Counter32,
sdpBindTlsL2ptStatsPagpBpdusRx Counter32,
sdpBindTlsL2ptStatsPagpBpdusTx Counter32,
sdpBindTlsL2ptStatsUdldBpdusRx Counter32,
sdpBindTlsL2ptStatsUdldBpdusTx Counter32
}
sdpBindTlsL2ptStatsLastClearedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsLastClearedTime indicates
the last time that these stats were cleared. The value
zero indicates that they have not been cleared yet."
::= { sdpBindTlsL2ptStatsEntry 1 }
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
number of L2PT encapsulated STP config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 2 }
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
number of L2PT encapsulated STP config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 3 }
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
number of L2PT encapsulated STP rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 4 }
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
number of L2PT encapsulated STP rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 5 }
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
number of L2PT encapsulated STP tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 6 }
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
number of L2PT encapsulated STP tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 7 }
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
number of L2PT encapsulated PVST config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 8 }
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
number of L2PT encapsulated PVST config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 9 }
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
number of L2PT encapsulated PVST rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 10 }
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
number of L2PT encapsulated PVST rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 11 }
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 12 }
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 13 }
sdpBindTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the
number of STP config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 14 }
sdpBindTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the
number of STP config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 15 }
sdpBindTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the
number of STP rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 16 }
sdpBindTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the
number of STP rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 17 }
sdpBindTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the
number of STP tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 18 }
sdpBindTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the
number of STP tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 19 }
sdpBindTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the
number of PVST config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 20 }
sdpBindTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the
number of PVST config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 21 }
sdpBindTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the
number of PVST rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 22 }
sdpBindTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the
number of PVST rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 23 }
sdpBindTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the
number of PVST tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 24 }
sdpBindTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the
number of PVST tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 25 }
sdpBindTlsL2ptStatsOtherBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the
number of other bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 26 }
sdpBindTlsL2ptStatsOtherBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the
number of other bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 27 }
sdpBindTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the
number of other L2PT bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 28 }
sdpBindTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the
number of other L2PT bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 29 }
sdpBindTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the
number of other invalid bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 30 }
sdpBindTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the
number of other invalid bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 31 }
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
number of L2PT encapsulated CDP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 32 }
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 33 }
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
number of L2PT encapsulated VTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 34 }
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 35 }
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
number of L2PT encapsulated DTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 36 }
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 37 }
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
number of L2PT encapsulated PAGP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 38 }
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 39 }
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
number of L2PT encapsulated UDLD bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 40 }
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 41 }
sdpBindTlsL2ptStatsCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the
number of CDP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 42 }
sdpBindTlsL2ptStatsCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the
number of CDP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 43 }
sdpBindTlsL2ptStatsVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the
number of VTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 44 }
sdpBindTlsL2ptStatsVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the
number of VTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 45 }
sdpBindTlsL2ptStatsDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the
number of DTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 46 }
sdpBindTlsL2ptStatsDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the
number of DTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 47 }
sdpBindTlsL2ptStatsPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the
number of PAGP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 48 }
sdpBindTlsL2ptStatsPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the
number of PAGP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 49 }
sdpBindTlsL2ptStatsUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the
number of UDLD bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 50 }
sdpBindTlsL2ptStatsUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the
number of UDLD bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 51 }
-- -------------------------
-- PW Template Table
-- -------------------------
pwTemplateTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of pwTemplateTableLastChanged indicates the
sysUpTime at the time of the last modification
of pwTemplateTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSdpObjs 17 }
pwTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains entries for pseudowire (PW) templates
specifying SDP auto-binding."
::= { tmnxSdpObjs 18 }
pwTemplateEntry OBJECT-TYPE
SYNTAX PwTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific PW template."
INDEX { pwTemplateId }
::= { pwTemplateTable 1 }
PwTemplateEntry ::=
SEQUENCE {
pwTemplateId PWTemplateId,
pwTemplateRowStatus RowStatus,
pwTemplateLastChanged TimeStamp,
pwTemplateUseProvisionedSdp TruthValue,
pwTemplateVcType SdpBindVcType,
pwTemplateAccountingPolicyId Unsigned32,
pwTemplateCollectAcctStats TruthValue,
pwTemplateMacLearning TmnxEnabledDisabled,
pwTemplateMacAgeing TmnxEnabledDisabled,
pwTemplateDiscardUnknownSource TmnxEnabledDisabled,
pwTemplateLimitMacMove TlsLimitMacMove,
pwTemplateMacPinning TmnxEnabledDisabled,
pwTemplateVlanVcTag Unsigned32,
pwTemplateMacAddressLimit Unsigned32,
pwTemplateShgName TNamedItemOrEmpty,
pwTemplateShgDescription TItemDescription,
pwTemplateShgRestProtSrcMac TruthValue,
pwTemplateShgRestUnprotDstMac TruthValue,
pwTemplateEgressMacFilterId TFilterID,
pwTemplateEgressIpFilterId TFilterID,
pwTemplateEgressIpv6FilterId TFilterID,
pwTemplateIngressMacFilterId TFilterID,
pwTemplateIngressIpFilterId TFilterID,
pwTemplateIngressIpv6FilterId TFilterID,
pwTemplateIgmpFastLeave TmnxEnabledDisabled,
pwTemplateIgmpImportPlcy TNamedItemOrEmpty,
pwTemplateIgmpLastMembIntvl Unsigned32,
pwTemplateIgmpMaxNbrGrps Unsigned32,
pwTemplateIgmpGenQueryIntvl Unsigned32,
pwTemplateIgmpQueryRespIntvl Unsigned32,
pwTemplateIgmpRobustCount Unsigned32,
pwTemplateIgmpSendQueries TmnxEnabledDisabled,
pwTemplateIgmpMcacPolicyName TPolicyStatementNameOrEmpty,
pwTemplateIgmpMcacUnconstBW Integer32,
pwTemplateIgmpMcacPrRsvMndBW Integer32,
pwTemplateIgmpVersion TmnxIgmpVersion
}
pwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The PW template identifier."
::= { pwTemplateEntry 1 }
pwTemplateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateRowStatus is used for the
creation and deletion of PW templates."
::= { pwTemplateEntry 2 }
pwTemplateLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of pwTemplateLastChanged indicates the
sysUpTime at the time of the last modification of this
entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { pwTemplateEntry 3 }
pwTemplateUseProvisionedSdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateUseProvisionedSdp specifies
whether the to use an already provisioned SDP.
A value of 'true' specifies that the tunnel manager
will be consulted for an existing active SDP.
Otherwise, a value of 'false' specifies that
the default SDP template will be used to use for
instantiation of the SDP."
DEFVAL { false }
::= { pwTemplateEntry 4 }
pwTemplateVcType OBJECT-TYPE
SYNTAX SdpBindVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateVcType specifies the type of
virtual circuit (VC) associated with the SDP Bind."
DEFVAL { ether }
::= { pwTemplateEntry 5 }
pwTemplateAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateAccountingPolicyId specifies the
policy to use to collect accounting statistics on
the SDP Bind. The value zero indicates that the
agent should use the default accounting policy,
if one exists."
DEFVAL { 0 }
::= { pwTemplateEntry 6 }
pwTemplateCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateCollectAcctStats specifies
whether the agent collects accounting statistics for
the SDP Bind. When the value is 'true' the agent
collects accounting statistics on the SDP Bind."
DEFVAL { false }
::= { pwTemplateEntry 7 }
pwTemplateMacLearning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateMacLearning specifies whether
the MAC learning process is enabled for the SDP Bind.
The value is ignored if MAC learning is disabled at
service level."
DEFVAL { enabled }
::= { pwTemplateEntry 8 }
pwTemplateMacAgeing OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateMacAgeing specifies whether
the MAC aging process is enabled for the SDP Bind.
The value is ignored if MAC aging is disabled
at the service level."
DEFVAL { enabled }
::= { pwTemplateEntry 9 }
pwTemplateDiscardUnknownSource OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "With the object pwTemplateMacAddressLimit a limit can
be configured for the max number of MAC addresses that
will be learned on the SDP Bind (only for spoke SDPs).
When the limit is reached, packets with unknown source
MAC address are forwarded by default. By setting
sdpBindTlsDiscardUnknownSource to 'enabled', packets with
unknown source MAC will be dropped instead."
DEFVAL { disabled }
::= { pwTemplateEntry 10 }
pwTemplateLimitMacMove OBJECT-TYPE
SYNTAX TlsLimitMacMove
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateLimitMacMove specifies the
behavior for when the re-learn rate specified by
svcTlsMacMoveMaxRate is exceeded.
When pwTemplateLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on the
SDP Bind, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When the
value is 'nonBlockable' the SDP Bind will not be
blocked, and another blockable SDP Bind will be
blocked instead."
DEFVAL { blockable }
::= { pwTemplateEntry 11 }
pwTemplateMacPinning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateMacPinning specifies
whether or not MAC address pinning is active on the
SDP Bind (mesh or spoke). Setting the value to 'enabled'
disables re-learning of MAC addresses on other SAPs or
SDPs within the same VPLS; the MAC address will hence
remain attached to the SDP Bind for the duration of
its age-timer. This object has effect only for MAC
addresses learned via the normal MAC learning
process, and not for entries learned via DHCP. The
value will be set by default to 'disabled'. However for
a spoke SDP that belongs to a residential SHG, the
value is set to enabled by the system, and cannot be
altered by the operator."
DEFVAL { disabled }
::= { pwTemplateEntry 12 }
pwTemplateVlanVcTag OBJECT-TYPE
SYNTAX Unsigned32 ('0000'H..'0fff'H)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateVlanVcTag specifies the VLAN VC tag
for the SDP Bind."
DEFVAL { '0fff'H }
::= { pwTemplateEntry 13 }
pwTemplateMacAddressLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..196607)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateMacAddressLimit specifies
the maximum number of learned and static entries
allowed in the FDB for the SDP Bind. The value 0
specifies no limit for the SDP Bind. The command is
valid only for spoke SDPs. When the value of
ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the
maximum value of pwTemplateMacAddressLimit is '131071'."
DEFVAL { 0 }
::= { pwTemplateEntry 14 }
pwTemplateShgName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateShgName specifies the name of the
split-horizon group where the spoke SDP Bind belongs to.
By default a spoke SDP Bind does not belong to any
split-horizon group. The name specified must
correspond to an existing split-horizon group in the TLS
service where the spoke SDP Bind is defined."
DEFVAL { "" }
::= { pwTemplateEntry 15 }
pwTemplateShgDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateShgDescription specifies a
user-provided description for split-horizon group on
the SDP Bind."
DEFVAL { "" }
::= { pwTemplateEntry 16 }
pwTemplateShgRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateShgRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests to relearn a protected MAC address will be
ignored."
DEFVAL { false }
::= { pwTemplateEntry 17 }
pwTemplateShgRestUnprotDstMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateShgRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC address
will be dropped."
DEFVAL { false }
::= { pwTemplateEntry 18 }
pwTemplateEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateEgressMacFilterId specifies
the tMacFilterId which indexes an egress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 19 }
pwTemplateEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateEgressIpFilterId specifies
the tIPFilterId which indexes an egress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 20 }
pwTemplateEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateEgressIpv6FilterId specifies
the tIPv6FilterId which indexes an egress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 21 }
pwTemplateIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIngressMacFilterId specifies
the tMacFilterId which indexes an ingress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 22 }
pwTemplateIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIngressIpFilterId specifies
the tIPFilterId which indexes an ingress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 23 }
pwTemplateIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIngressIpv6FilterId specifies
the tIPv6FilterId which indexes an ingress filter entry
in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no
filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 24 }
pwTemplateIgmpFastLeave OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpFastLeave specifies
whether or not fastleave is allowed on the SDP Bind.
If set to 'enabled', the system prunes the port on which an IGMP
'leave' message has been received without waiting for the Group
Specific Query to timeout."
DEFVAL { disabled }
::= { pwTemplateEntry 25 }
pwTemplateIgmpImportPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpImportPlcy specifies
a policy statement that must be applied to all
incoming IGMP messages on the SDP Bind."
DEFVAL { "" }
::= { pwTemplateEntry 26 }
pwTemplateIgmpLastMembIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
UNITS "deci-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpLastMembIntvl specifies
the Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent
in response to 'leave' messages. This is also the
amount of time between Group-Specific Query messages.
This value may be tuned to modify the leave latency of
the network. A reduced value results in reduced time to
detect the loss of the last member of a group."
DEFVAL { 10 }
::= { pwTemplateEntry 27 }
pwTemplateIgmpMaxNbrGrps OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpMaxNbrGrps specifies how many
group addresses are allowed for the SDP Bind. The value 0
means that no limit is imposed."
DEFVAL { 0 }
::= { pwTemplateEntry 28 }
pwTemplateIgmpGenQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32 (2..1024)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpGenQueryIntvl specifies
the interval (in seconds) between two consecutive general
queries sent by the system on the SDP.
The value of this object is only meaningful when the value of
pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 125 }
::= { pwTemplateEntry 29 }
pwTemplateIgmpQueryRespIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpQueryRespIntvl specifies the
maximum response time (in seconds) advertised in
IGMPv2/v3 queries.
The value of this object is only meaningful when the value of
pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 10 }
::= { pwTemplateEntry 30 }
pwTemplateIgmpRobustCount OBJECT-TYPE
SYNTAX Unsigned32 (2..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpRobustCount specifies the
value of the Robust count.
This object allows tuning for the expected packet loss on
the SDP. If an SDP is expected to be lossy, the Robustness
Variable may be increased. IGMP snooping is robust to
(Robustness Variable-1) packet losses.
The value of this object is only meaningful when the
value of pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 2 }
::= { pwTemplateEntry 31 }
pwTemplateIgmpSendQueries OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpSendQueries specifies whether
the system generates General Queries by itself on the SDP."
DEFVAL { disabled }
::= { pwTemplateEntry 32 }
pwTemplateIgmpMcacPolicyName OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpMcacPolicyName indicates the name
of the multicast CAC policy."
DEFVAL { "" }
::= { pwTemplateEntry 33 }
pwTemplateIgmpMcacUnconstBW OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilo-bits per
second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if
a multicast CAC policy is assigned on the interface, then
no group (channel) from that policy is allowed on that interface."
DEFVAL { -1 }
::= { pwTemplateEntry 34 }
pwTemplateIgmpMcacPrRsvMndBW OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).
If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory
channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW
is '-1', then all mandatory and optional channels are allowed.
If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the
value of pwTemplateIgmpMcacUnconstBW, then all the unconstrained
bandwidth on a given interface is allocated to mandatory channels
configured through multicast CAC policy on that interface and no
optional groups (channels) are allowed.
The value of pwTemplateIgmpMcacPrRsvMndBW should always be less
than or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt
to set the value of pwTemplateIgmpMcacPrRsvMndBW greater than
that of pwTemplateIgmpMcacUnconstBW will result in
'inconsistentValue' error."
DEFVAL { -1 }
::= { pwTemplateEntry 35 }
pwTemplateIgmpVersion OBJECT-TYPE
SYNTAX TmnxIgmpVersion
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpVersion specifies the version
of IGMP for the PW template."
DEFVAL { version3 }
::= { pwTemplateEntry 36 }
-- ----------------------------------------------
-- PW Template IGMP Snooping Group Source Table
-- ----------------------------------------------
pwTemplateIgmpSnpgGrpSrcTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates
the sysUpTime at the time of the last modification
of pwTemplateIgmpSnpgGrpSrcTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSdpObjs 19 }
pwTemplateIgmpSnpgGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateIgmpSnpgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains entries for static IGMP Snooping
groups."
::= { tmnxSdpObjs 20 }
pwTemplateIgmpSnpgGrpSrcEntry OBJECT-TYPE
SYNTAX PwTemplateIgmpSnpgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific static IGMP Snooping groups."
INDEX { pwTemplateId,
pwTemplateIgmpSnpgGrpAddrType,
pwTemplateIgmpSnpgGrpAddr,
pwTemplateIgmpSnpgSrcAddrType,
pwTemplateIgmpSnpgSrcAddr }
::= { pwTemplateIgmpSnpgGrpSrcTable 1}
PwTemplateIgmpSnpgGrpSrcEntry ::= SEQUENCE {
pwTemplateIgmpSnpgGrpAddrType InetAddressType,
pwTemplateIgmpSnpgGrpAddr InetAddress,
pwTemplateIgmpSnpgSrcAddrType InetAddressType,
pwTemplateIgmpSnpgSrcAddr InetAddress,
pwTemplateIgmpSnpgRowStatus RowStatus,
pwTemplateIgmpSnpgLastChngd TimeStamp
}
pwTemplateIgmpSnpgGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast group address type for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 1 }
pwTemplateIgmpSnpgGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast group address for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 2 }
pwTemplateIgmpSnpgSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source address type for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 3 }
pwTemplateIgmpSnpgSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source address for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 4 }
pwTemplateIgmpSnpgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateIgmpSnpgRowStatus is used for
the creation and deletion of static IGMP snooping entries."
::= { pwTemplateIgmpSnpgGrpSrcEntry 5 }
pwTemplateIgmpSnpgLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of pwTemplateIgmpSnpgLastChngd indicates the
sysUpTime at the time of the last modification of this
entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { pwTemplateIgmpSnpgGrpSrcEntry 6 }
-- --------------------------------------------
-- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table
-- --------------------------------------------
pwTemplateMfibAllowedMdaTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of pwTemplateMfibAllowedMdaTblLC indicates
the sysUpTime at the time of the last modification
of pwTemplateMfibAllowedMdaTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSdpObjs 21 }
pwTemplateMfibAllowedMdaTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The pwTemplateMfibAllowedMdaTable has an entry for each
MFIB allowed MDA destination for an PW template."
::= { tmnxSdpObjs 22 }
pwTemplateMfibAllowedMdaEntry OBJECT-TYPE
SYNTAX PwTemplateMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents an MFIB allowed MDA destination
for an PW template configured in the system. Entries
can be created and deleted via SNMP SET operations on the
object pwTemplateMfibMdaRowStatus."
INDEX { pwTemplateId,
tmnxChassisIndex,
tmnxCardSlotNum,
tmnxMDASlotNum }
::= { pwTemplateMfibAllowedMdaTable 1 }
PwTemplateMfibAllowedMdaEntry ::=
SEQUENCE {
pwTemplateMfibMdaRowStatus RowStatus
}
pwTemplateMfibMdaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of pwTemplateMfibMdaRowStatus controls the
creation and deletion of rows in this table."
::= { pwTemplateMfibAllowedMdaEntry 1 }
-- ----------------------------------------
-- SDP BIND TLS MRP Information Table
-- ----------------------------------------
sdpBindTlsMrpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpTableLastChanged indicates the
sysUpTime at the time of the last modification
of sdpBindTlsMrpTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSdpObjs 23 }
sdpBindTlsMrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpBindTlsMrpTable allows the operator to modify
attributes of the Multiple Registration Protocol (MRP)
feature for the TLS SDP Bind.
This table contains an entry for each TLS SDP Bind created
by the user using either sdpBindTlsTable or
sdpBindMeshTlsTable.
Rows in this table are created and deleted automatically
by the system."
::= { tmnxSdpObjs 24 }
sdpBindTlsMrpEntry OBJECT-TYPE
SYNTAX SdpBindTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry contains objects that allows the
modification of the Multiple Registration Protocol feature
for a specific SDP-Binding in a TLS service."
INDEX { svcId, sdpBindId }
::= { sdpBindTlsMrpTable 1 }
SdpBindTlsMrpEntry ::=
SEQUENCE {
sdpBindTlsMrpLastChngd TimeStamp,
sdpBindTlsMrpJoinTime Unsigned32,
sdpBindTlsMrpLeaveTime Unsigned32,
sdpBindTlsMrpLeaveAllTime Unsigned32,
sdpBindTlsMrpPeriodicTime Unsigned32,
sdpBindTlsMrpPeriodicEnabled TruthValue,
sdpBindTlsMrpRxPdus Counter32,
sdpBindTlsMrpDroppedPdus Counter32,
sdpBindTlsMrpTxPdus Counter32,
sdpBindTlsMrpRxNewEvent Counter32,
sdpBindTlsMrpRxJoinInEvent Counter32,
sdpBindTlsMrpRxInEvent Counter32,
sdpBindTlsMrpRxJoinEmptyEvent Counter32,
sdpBindTlsMrpRxEmptyEvent Counter32,
sdpBindTlsMrpRxLeaveEvent Counter32,
sdpBindTlsMrpTxNewEvent Counter32,
sdpBindTlsMrpTxJoinInEvent Counter32,
sdpBindTlsMrpTxInEvent Counter32,
sdpBindTlsMrpTxJoinEmptyEvent Counter32,
sdpBindTlsMrpTxEmptyEvent Counter32,
sdpBindTlsMrpTxLeaveEvent Counter32
}
sdpBindTlsMrpLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpLastChngd indicates the
sysUpTime at the time of the last modification of this
entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { sdpBindTlsMrpEntry 1 }
sdpBindTlsMrpJoinTime OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpJoinTime specifies a timer
value in 10ths of seconds which determines the maximum rate
at which attribute join messages can be sent on the SDP."
DEFVAL { 2 }
::= { sdpBindTlsMrpEntry 2 }
sdpBindTlsMrpLeaveTime OBJECT-TYPE
SYNTAX Unsigned32 (30..60)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpLeaveTime specifies a timer
value in 10ths of seconds which determines the amount of
time a registered attribute is held in leave state before
the registration is removed."
DEFVAL { 30 }
::= { sdpBindTlsMrpEntry 3 }
sdpBindTlsMrpLeaveAllTime OBJECT-TYPE
SYNTAX Unsigned32 (60..300)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpLeaveAllTime specifies a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SDP are all
refreshed."
DEFVAL { 100 }
::= { sdpBindTlsMrpEntry 4 }
sdpBindTlsMrpPeriodicTime OBJECT-TYPE
SYNTAX Unsigned32 (10..100)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpPeriodicTime specifies a timer
value in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations."
DEFVAL { 10 }
::= { sdpBindTlsMrpEntry 5 }
sdpBindTlsMrpPeriodicEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sdpBindTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled."
DEFVAL { false }
::= { sdpBindTlsMrpEntry 6 }
sdpBindTlsMrpRxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets
received on this SDP Bind."
::= { sdpBindTlsMrpEntry 7 }
sdpBindTlsMrpDroppedPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped
MRP packets on this SDP Bind."
::= { sdpBindTlsMrpEntry 8 }
sdpBindTlsMrpTxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets
transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 9 }
sdpBindTlsMrpRxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP
events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 10 }
sdpBindTlsMrpRxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxJoinInEvent indicates the number of
'Join-In' MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 11 }
sdpBindTlsMrpRxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP
events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 12 }
sdpBindTlsMrpRxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of
'Join Empty' MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 13 }
sdpBindTlsMrpRxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty'
MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 14 }
sdpBindTlsMrpRxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave'
MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 15 }
sdpBindTlsMrpTxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP
events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 16 }
sdpBindTlsMrpTxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxJoinInEvent indicates the number of
'Join-In' MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 17 }
sdpBindTlsMrpTxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP
events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 18 }
sdpBindTlsMrpTxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of
'Join Empty' MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 19 }
sdpBindTlsMrpTxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty'
MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 20 }
sdpBindTlsMrpTxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave'
MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 21 }
-- -------------------------
-- SDP Bind TLS MMRP Table
-- -------------------------
sdpBindTlsMmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains an entry for each MAC address managed
by Multiple MAC Registration Protocol (MMRP) on the SDP
Bind for the TLS. Entries are dynamically created and
destroyed by the system as the MAC Addresses are registered
or declared in MMRP."
::= { tmnxSdpObjs 25 }
sdpBindTlsMmrpEntry OBJECT-TYPE
SYNTAX SdpBindTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MMRP specific information about a MAC address managed by
MMRP on a SDP Bind in a TLS."
INDEX { svcId, sdpBindId, sdpBindTlsMmrpMacAddr }
::= { sdpBindTlsMmrpTable 1 }
SdpBindTlsMmrpEntry ::=
SEQUENCE {
sdpBindTlsMmrpMacAddr MacAddress,
sdpBindTlsMmrpDeclared TruthValue,
sdpBindTlsMmrpRegistered TruthValue
}
sdpBindTlsMmrpMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address which
is being managed by MMRP on this SAP."
::= { sdpBindTlsMmrpEntry 1 }
sdpBindTlsMmrpDeclared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpDeclared indicates whether the MRP applicant
on this SAP is declaring this MAC address on behalf of MMRP."
::= { sdpBindTlsMmrpEntry 2 }
sdpBindTlsMmrpRegistered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpRegistered indicates whether the MRP
registrant on this SAP has notified MMRP of a registration of this MAC
address."
::= { sdpBindTlsMmrpEntry 3 }
-- ---------------------------------------------------------------------
-- SDP Auto Bind Bgp Auto-Discovery Info
--
-- Sparse Dependent Extention of the sdpBindTable.
--
-- The same indexes are used for both the base table, sdpBindTable,
-- and the sparse dependent table, sdpAutoBindBgpInfoTable.
--
-- This in effect extends the sdpBindTable with additional columns.
-- Rows are created in the sdpAutoBindBgpInfoTable only for those entries
-- in the sdpBindTable that are created as a result of BGP Auto-discovery.
--
-- Deletion of a row in the sdpBindTable results in the
-- same fate for the row in the sdpAutoBindBgpInfoTable.
-- ---------------------------------------------------------------------
sdpAutoBindBgpInfoTableLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoBindBgpInfoTableLC indicates
the sysUpTime at the time of the last modification
of sdpAutoBindBgpInfoTable.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { tmnxSdpObjs 26 }
sdpAutoBindBgpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpAutoBindBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sdpAutoBindBgpInfoTable has an entry for each
SDP Bind entry from sdpBindTable which was
created as a result of BGP Auto-discovery."
::= { tmnxSdpObjs 27 }
sdpAutoBindBgpInfoEntry OBJECT-TYPE
SYNTAX SdpAutoBindBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry contains BGP-related information for an
SDP Bind entry created as a result of BGP Auto-discovery."
INDEX { svcId, sdpBindId }
::= { sdpAutoBindBgpInfoTable 1 }
SdpAutoBindBgpInfoEntry ::=
SEQUENCE {
sdpAutoBindBgpInfoTemplateId PWTemplateId,
sdpAutoBindBgpInfoAGI TmnxVPNRouteDistinguisher,
sdpAutoBindBgpInfoSAII Unsigned32,
sdpAutoBindBgpInfoTAII Unsigned32
}
sdpAutoBindBgpInfoTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoBindBgpInfoTemplateId indicates the
the value of the pwTemplateId object for the
PW template entry used to create this
SDP Bind."
::= { sdpAutoBindBgpInfoEntry 1 }
sdpAutoBindBgpInfoAGI OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoBindBgpInfoAGI indicates the
Attachment Group Indentifier (AGI) portion of the
Generalized Id FEC element from the pseudowire
setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 2 }
sdpAutoBindBgpInfoSAII OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoBindBgpInfoSAII indicates the
Source Attachment Individual Indentifier (SAII) portion
of the Generalized Id FEC element from the pseudowire
setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 3 }
sdpAutoBindBgpInfoTAII OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sdpAutoBindBgpInfoTAII indicates the
Target Attachment Individual Indentifier (TAII) portion
of the Generalized Id FEC element from the pseudowire
setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 4 }
-- -------------------------------------
-- BGP Auto-Discovery SDP Auto Policy Table
-- -------------------------------------
svcTlsBgpADPWTempBindTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindTblLC indicates the
sysUpTime at the time of the last modification
of svcTlsBgpADPWTempBindTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSvcObjs 32 }
svcTlsBgpADPWTempBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcTlsBgpADAutoBindPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "svcTlsBgpADPWTempBindTable contains entries for the
associations between SDP Auto-Bind policies and a
BGP Auto-Discovery context for a VPLS service."
::= { tmnxSvcObjs 33 }
svcTlsBgpADPWTempBindEntry OBJECT-TYPE
SYNTAX SvcTlsBgpADAutoBindPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A SDP Auto-Bind Policy entry in the
svcTlsBgpADPWTempBindTable."
INDEX { svcId, pwTemplateId }
::= { svcTlsBgpADPWTempBindTable 1 }
SvcTlsBgpADAutoBindPlcyEntry ::= SEQUENCE {
svcTlsBgpADPWTempBindRowStatus RowStatus,
svcTlsBgpADPWTempBindLastChngd TimeStamp,
svcTlsBgpADPWTempBindSHG TNamedItemOrEmpty
}
svcTlsBgpADPWTempBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindRowStatus is used
for the creation and deletion of associations between
SDP Auto-Bind policies and a BGP Auto-Discovery context
for a VPLS service."
::= { svcTlsBgpADPWTempBindEntry 1 }
svcTlsBgpADPWTempBindLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindLastChngd indicates
the sysUpTime at the time of the last modification of
this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { svcTlsBgpADPWTempBindEntry 2 }
svcTlsBgpADPWTempBindSHG OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindSHG specifies the
split-horizon group to associate with the SDP Auto-Bind
policy in this BGP Auto-Discovery context in a VPLS
service.
When this Auto-Bind policy is used to create an SDP,
this split-horizon group will be associated with the
SDP.
The name specified must correspond to an
existing split-horizon group in the VPLS service,
otherwise an 'inconsistentValue' error will be
returned."
DEFVAL { "" }
::= { svcTlsBgpADPWTempBindEntry 3 }
-- -----------------------------------------
-- BGP Auto-Discovery SDP Auto Policy Route Target Table
-- -----------------------------------------
svcTlsBgpADPWTempBindRTTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindRTTblLC indicates the
sysUpTime at the time of the last modification
of svcTlsBgpADPWTempBindRTTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSvcObjs 34 }
svcTlsBgpADPWTempBindRTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcTlsBgpADAutoBindPlcyRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "svcTlsBgpADPWTempBindTable contains entries for Route
Targets associated with a SDP Auto-Bind policy and a
BGP Auto-Discovery context for a VPLS service."
::= { tmnxSvcObjs 35 }
svcTlsBgpADPWTempBindRTEntry OBJECT-TYPE
SYNTAX SvcTlsBgpADAutoBindPlcyRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A SDP Auto-Bind Policy Route Target entry in the
svcTlsBgpADPWTempBindRTTable."
INDEX { svcId, pwTemplateId, IMPLIED svcTlsBgpADPWTempBindRT }
::= { svcTlsBgpADPWTempBindRTTable 1 }
SvcTlsBgpADAutoBindPlcyRTEntry ::= SEQUENCE {
svcTlsBgpADPWTempBindRT TNamedItem,
svcTlsBgpADPWTempBindRTRowStat RowStatus
}
svcTlsBgpADPWTempBindRT OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindRT is the Route
Target associated with a PW template and a
BGP Auto-Discovery context for a VPLS service.
When advertisements are received with this Route Target,
the PW template specified by the index, pwTemplateId,
will be used to create the SDP."
::= { svcTlsBgpADPWTempBindRTEntry 1 }
svcTlsBgpADPWTempBindRTRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of svcTlsBgpADPWTempBindRTRowStat is used
for the association of Route Targets with a SDP Auto-Bind
policy and a BGP Auto-Discovery context for a VPLS
service."
::= { svcTlsBgpADPWTempBindRTEntry 2 }
-- -------------------------
-- L2 Route Table
-- -------------------------
svcL2RteTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcL2RteTableLastChanged indicates the
sysUpTime at the time of the last modification of
svcL2RteTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSvcObjs 38 }
svcL2RteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcL2RteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "svcL2RteTable contains entries for L2 routes."
::= { tmnxSvcObjs 39 }
svcL2RteEntry OBJECT-TYPE
SYNTAX SvcL2RteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An L2 route entry in the svcL2RteTable."
INDEX { svcId,
svcL2RteVsiPrefix,
svcL2RteRouteDistinguisher,
svcL2RteNextHopType,
svcL2RteNextHop }
::= { svcL2RteTable 1}
SvcL2RteEntry ::= SEQUENCE {
svcL2RteVsiPrefix Unsigned32,
svcL2RteRouteDistinguisher TmnxVPNRouteDistinguisher,
svcL2RteNextHopType InetAddressType,
svcL2RteNextHop InetAddress,
svcL2RteSdpBindId SdpBindId,
svcL2RtePwTemplateId PWTemplateId
}
svcL2RteVsiPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of svcL2RteVsiPrefix is the low-order 4 bytes
of the Virtual Switch Instance idendifier (VSI-id) of the
remote VSI for this L2 route."
::= { svcL2RteEntry 1 }
svcL2RteRouteDistinguisher OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of svcL2RteRouteDistinguisher is the high-order
6 bytes of the Virtual Switch Instance idendifier (VSI-id)
of the remote VSI for this L2 route."
::= { svcL2RteEntry 2 }
svcL2RteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of svcL2RteNextHopType indicates the address
type of svcL2RteNextHop."
::= { svcL2RteEntry 3 }
svcL2RteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of svcL2RteNextHop indicates the IP next hop
for this L2 route. This value is equivilant to the
IP address of the Far End of this L2 route."
::= { svcL2RteEntry 4 }
svcL2RteSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcL2RteSdpBindId indicates the SDP bind
ID of the SDP bind that binds this VPLS context to
the VSI indicated by svcL2RteRouteDistinguisher,
svcL2RteVsiPrefix, and svcL2RteNextHop."
::= { svcL2RteEntry 5 }
svcL2RtePwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of svcL2RtePwTemplateId indicates the PW
template associated with the SDP bind that binds
this VPLS context to the VSI indicated by
svcL2RteRouteDistinguisher, svcL2RteVsiPrefix,
and svcL2RteNextHop."
::= { svcL2RteEntry 6 }
-- --------------------------------------
-- SDP Notification Objects
-- --------------------------------------
-- tmnxSdpNotifyObjs OBJECT IDENTIFIER ::= ( tmnxSdpObjs 100 }
sdpNotifySdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The ID of the SDP where SDP Bindings are associated.
This object is used by the sdpBindSdpStateChangeProcessed
notification to indicate the SDP that changed
state and that resulted in having the associated
sdpBindStatusChanged events suppressed for all SDP
Bindings on that SDP."
::= { tmnxSdpNotifyObjs 1 }
dynamicSdpStatus OBJECT-TYPE
SYNTAX ConfigStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of dynamicSdpStatus indicates the status of the
dynamic SDP which is used by the dynamicSdpConfigChanged
and dynamicSdpBindConfigChanged notifications to indicate
what state the dynamic SDP or SDP Bind
has entered: 'created', 'modified', or 'deleted'."
::= { tmnxSdpNotifyObjs 2 }
dynamicSdpOrigin OBJECT-TYPE
SYNTAX L2RouteOrigin
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of dynamicSdpOrigin indicates the origin of the
dynamic SDP. The origin indicates the protocol or mechanism
that created the dynamic SDP."
::= { tmnxSdpNotifyObjs 3 }
dynamicSdpCreationError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object dynamicSdpCreationError
indicates the reason why the system was unable to create
the dynamic SDP."
::= { tmnxSdpNotifyObjs 4 }
dynamicSdpBindCreationError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object dynamicSdpBindCreationError
indicates the reason why the system was unable to create
the dynamic SDP Binding."
::= { tmnxSdpNotifyObjs 5 }
-- --------------------------------------------
-- SDP traps
-- --------------------------------------------
sdpCreated NOTIFICATION-TYPE
OBJECTS {
sdpId
}
STATUS obsolete
DESCRIPTION "The sdpCreated notification is sent when a new row is
created in the sdpInfoTable."
::= { sdpTraps 1 }
sdpDeleted NOTIFICATION-TYPE
OBJECTS {
sdpId
}
STATUS obsolete
DESCRIPTION "The sdpDeleted notification is sent when an existing row
is deleted from the ng row is deleted from the
sdpInfoTable."
::= { sdpTraps 2 }
sdpStatusChanged NOTIFICATION-TYPE
OBJECTS {
sdpId,
sdpAdminStatus,
sdpOperStatus
}
STATUS current
DESCRIPTION "The sdpStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SDP."
::= { sdpTraps 3 }
sdpBindCreated NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId
}
STATUS obsolete
DESCRIPTION "The sdpBindCreated notification is sent when a new row
is created in the sdpBindTable."
::= { sdpTraps 4 }
sdpBindDeleted NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId
}
STATUS obsolete
DESCRIPTION "The sdpBindDeleted notification is sent when an existing
row is deleted from the sdpBindTable."
::= { sdpTraps 5 }
sdpBindStatusChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindOperFlags
}
STATUS current
DESCRIPTION "The sdpBindStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SDP Binding.
Notice that this trap is not generated whenever
the SDP Binding operating status change is caused by
an operating status change on the associated SDP."
::= { sdpTraps 6 }
sdpTlsMacAddrLimitAlarmRaised NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId
}
STATUS current
DESCRIPTION "The sdpTlsMacAddrLimitAlarmRaised notification is sent
whenever the number of MAC addresses stored in the FDB
for this spoke sdp increases to reach the watermark
specified by the object svcTlsFdbTableFullHighWatermark."
::= { sdpTraps 7 }
sdpTlsMacAddrLimitAlarmCleared NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId
}
STATUS current
DESCRIPTION "The sdpTlsMacAddrLimitAlarmCleared notification is sent
whenever the number of MAC addresses stored in the FDB for
this spoke SDP drops to the watermark specified by the
object svcTlsFdbTableFullLowWatermark."
::= { sdpTraps 8 }
sdpTlsDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId,
tlsDhcpPacketProblem
}
STATUS obsolete
DESCRIPTION "The sdpTlsDHCPSuspiciousPcktRcvd notification is
generated when a DHCP packet is received with suspicious
content."
::= { sdpTraps 9 }
sdpBindDHCPLeaseEntriesExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpClientLease
}
STATUS current
DESCRIPTION "The sdpBindDHCPLeaseEntriesExceeded notification is
generated when the number of DHCP lease state entries on a
given IES or VRPN spoke-SDP reaches the user configurable
upper limit given by
ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate."
::= { sdpTraps 10 }
sdpBindDHCPLseStateOverride NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpLseStateOldCiAddr,
svcDhcpLseStateOldChAddr
}
STATUS current
DESCRIPTION "The sdpBindDHCPLseStateOverride notification is generated
when an existing DHCP lease state is overridden by a new
lease state which has the same IP address but a different
MAC address. This trap is only applicable for IES and VPRN
spoke-SDPs."
::= { sdpTraps 11 }
sdpBindDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpPacketProblem
}
STATUS current
DESCRIPTION "The sdpBindDHCPSuspiciousPcktRcvd notification is
generated when a DHCP packet is received with suspicious
content."
::= { sdpTraps 12 }
sdpBindDHCPLseStatePopulateErr NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStatePopulateError
}
STATUS current
DESCRIPTION "The sdpBindDHCPLseStatePopulateErr notification indicates
that the system was unable to update the DHCP Lease State
table with the information contained in the DHCP ACK
message. The DHCP ACK message has been discarded. This
trap is only applicable for IES and VPRN spoke-SDPs."
::= { sdpTraps 13 }
sdpBindPwPeerStatusBitsChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindPwPeerStatusBits
}
STATUS current
DESCRIPTION "The sdpBindPwPeerStatusBitsChanged notification is
generated when there is a change in the PW status
bits received from the peer."
::= { sdpTraps 14 }
sdpBindTlsMacMoveExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindTlsMacMoveRateExcdLeft,
sdpBindTlsMacMoveNextUpTime,
svcTlsMacMoveMaxRate
}
STATUS current
DESCRIPTION "The sdpBindTlsMacMoveExceeded notification is generated
when the SDP exceeds the TLS svcTlsMacMoveMaxRate."
::= { sdpTraps 15 }
sdpBindPwPeerFaultAddrChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindPwFaultInetAddressType,
sdpBindPwFaultInetAddress
}
STATUS current
DESCRIPTION "The sdpBindPwPeerFaultAddrChanged notification is
generated when there is a change in the IP address
included in the PW status message sent by the peer.
This notification is only generated if the IP address
is the only information in the notification that
changed. If the status bits changed as well, then
the sdpBindPwPeerStatusBitsChanged notification will
be generated instead."
::= { sdpTraps 16 }
sdpBindDHCPProxyServerError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpProxyError
}
STATUS current
DESCRIPTION "The sdpBindDHCPProxyServerError notification indicates
that the system was unable to proxy DHCP requests."
::= { sdpTraps 17 }
sdpBindDHCPCoAError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpCoAError
}
STATUS obsolete
DESCRIPTION "The sdpBindDHCPCoAError notification indicates that
the system was unable to process a Change of Authorization
(CoA) request from a Radius server."
::= { sdpTraps 18 }
sdpBindDHCPSubAuthError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpSubAuthError
}
STATUS obsolete
DESCRIPTION "The sdpBindDHCPSubAuthError notification indicates that
the system encountered a problem while trying to
authenticate a subscriber."
::= { sdpTraps 19 }
sdpBindSdpStateChangeProcessed NOTIFICATION-TYPE
OBJECTS {
sdpNotifySdpId
}
STATUS current
DESCRIPTION "The sdpBindSdpStateChangeProcessed notification
indicates that the agent has finished processing an
SDP state change event, and that the operating status
of all the affected SDP Bindings has been updated
accordingly. The value of the sdpNotifySdpId object
indicates the SDP that experienced the state change."
::= { sdpTraps 20 }
sdpBindDHCPLseStateMobilityErr NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStatePopulateError
}
STATUS current
DESCRIPTION "The sdpBindDHCPLseStateMobilityErr notification indicates
that the system was unable to perform a mobility check
for this lease state."
::= { sdpTraps 21 }
sdpBandwidthOverbooked NOTIFICATION-TYPE
OBJECTS {
sdpId,
sdpMaxBookableBandwidth,
sdpBookedBandwidth
}
STATUS current
DESCRIPTION "The sdpBandwidthOverbooked notification indicates
that the bandwidth that has been allocated to the SDP
bindings indicated by sdpBookedBandwidth exceeds
sdpMaxBookableBandwidth."
::= { sdpTraps 22 }
sdpBindInsufficientBandwidth NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpId,
sdpBindId,
sdpAvailableBandwidth,
sdpBindAdminBandwidth
}
STATUS current
DESCRIPTION "The sdpBindInsufficientBandwidth notification indicates
that the available bandwidth of the SDP is insufficient
to satisfy the bandwidth requirement specified by
sdpBindAdminBandwidth of this SDP binding."
::= { sdpTraps 23 }
dynamicSdpConfigChanged NOTIFICATION-TYPE
OBJECTS {
dynamicSdpOrigin,
sdpId,
svcL2RteSdpBindId,
dynamicSdpStatus
}
STATUS current
DESCRIPTION "The dynamicSdpConfigChanged notification is generated when a
dynamic SDP is 'created', 'modified', or 'deleted', with the
value of dynamicSdpStatus indicated which state it has entered."
::= { sdpTraps 24 }
dynamicSdpBindConfigChanged NOTIFICATION-TYPE
OBJECTS {
dynamicSdpOrigin,
sdpId,
svcL2RteSdpBindId,
dynamicSdpStatus
}
STATUS current
DESCRIPTION "The dynamicSdpBindConfigChanged notification is generated when a
dynamic SDP Bind is 'created', 'modified', or 'deleted', with the
value of dynamicSdpStatus indicated which state it has entered."
::= { sdpTraps 25 }
dynamicSdpCreationFailed NOTIFICATION-TYPE
OBJECTS {
svcL2RteSdpBindId,
dynamicSdpOrigin,
dynamicSdpCreationError
}
STATUS current
DESCRIPTION "The dynamicSdpCreationFailed notification is generated
when the system fails to create a dynamic SDP."
::= { sdpTraps 26 }
dynamicSdpBindCreationFailed NOTIFICATION-TYPE
OBJECTS {
svcL2RteSdpBindId,
dynamicSdpOrigin,
sdpId,
pwTemplateLastChanged,
dynamicSdpBindCreationError
}
STATUS current
DESCRIPTION "The dynamicSdpBindCreationFailed notification is generated
when the system fails to create a dynamic SDP Bind."
::= { sdpTraps 27 }
-- ------------------------------------
-- TLS STP traps
-- ------------------------------------
unacknowledgedTCN NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpId
}
STATUS current
DESCRIPTION "The unacknowledgedTCN notification is generated when a
TCN sent towards the root bridge on the root port (SAP
or SDP binding) has not been acknowledged within the
allowed time. A portion of the spanning tree topology
may not have been notified that a topology change has
taken place. FDB tables on some devices may take
significantly longer to represent the new distribution
of layer-2 addresses. Examine this device and devices
towards the root bridge for STP issues."
::= { tstpTraps 8 }
tmnxSvcTopoChgSdpBindMajorState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpPortState,
tmnxOldSdpBindTlsStpPortState
}
STATUS current
DESCRIPTION "The tmnxSvcTopoChgSdpBindMajorState notification is
generated when a SDP binding has transitioned its
state from learning to forwarding or from forwarding
to blocking or broken. The spanning tree topology has
been modified. It may denote loss of customer access
or redundancy. Check the new topology against the
provisioned topology to determine the severity of
connectivity loss."
::= { tstpTraps 14 }
tmnxSvcNewRootSdpBind NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
svcTlsStpDesignatedRoot
}
STATUS current
DESCRIPTION "The tmnxSvcNewRootSdpBind notification is generated
when the previous root bridge has been aged out and a
new root bridge has been elected. The new root bridge
creates a new spanning tree topology. It may denote
loss of customer access or redundancy. Check the new
topology against the provisioned topology to determine
the severity of connectivity loss."
::= { tstpTraps 15 }
tmnxSvcTopoChgSdpBindState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpPortState,
tmnxOldSdpBindTlsStpPortState
}
STATUS current
DESCRIPTION "The tmnxSvcTopoChgSdpBindState notification is
generated when a SDP binding has transitioned state to
blocking or broken from learning state. This event
complements what is not covered by
tmnxSvcTopoChgSdpBindMajorState. The spanning tree
topology has been modified. It may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine the
severity of connectivity loss."
::= { tstpTraps 16 }
tmnxSvcSdpBindRcvdTCN NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId
}
STATUS current
DESCRIPTION "The tmnxSvcSdpBindRcvdTCN notification is generated
when a SDP binding has received TCN from another
bridge. This bridge will either have its configured
BPDU with the topology change flag set if it is a root
bridge, or it will pass TCN to its root bridge.
Eventually the address aging timer for the forwarding
database will be made shorter for a short period of
time. No recovery is needed."
::= { tstpTraps 17 }
tmnxSvcSdpBindRcvdHigherBriPrio NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxCustomerBridgeId,
tmnxCustomerRootBridgeId
}
STATUS current
DESCRIPTION "The tmnxSvcSdpBindRcvdHigherBriPrio notification is
generated when a customer's device has been configured
with a bridge priority equal to zero. The SDP binding
that the customer's device is connected through will
be blocked. Remove the customer's device or
reconfigure the customer's bridge priority with value
greater than zero."
::= { tstpTraps 18 }
tmnxSvcSdpBindEncapPVST NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION "The tmnxSvcSdpBindEncapPVST notification is generated
when an SDP bindings STP received a BPDU that was PVST
encapsulated. The SDP binding STP's BPDUs will be PVST
encapsulated. No recovery is needed."
::= { tstpTraps 19 }
tmnxSvcSdpBindEncapDot1d NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION "The tmnxSvcSdpBindEncapDot1d notification is generated
when a SDP binding received a BPDU that was 802.1d
encapsulated. The SDP binding BPDUs will also be
802.1d encapsulated. No recovery is needed."
::= { tstpTraps 20 }
tmnxSvcSdpActiveProtocolChange NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpOperProtocol
}
STATUS current
DESCRIPTION "The tmnxSvcSdpActiveProtocolChange notification is
generated when the spanning tree protocol on this SDP
changes from rstp to stp or vise versa. No recovery is
needed."
::= { tstpTraps 31 }
tmnxStpMeshNotInMstRegion NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpBindId
}
STATUS current
DESCRIPTION "The tmnxStpMeshNotInMstRegion notification is
generated when a MSTP BPDU from outside the MST region
is received on the indicated mesh SDP.
It is up to the operator to make sure bridges connected
via mesh SDPs are in the same MST-region. If not the mesh
will NOT become operational."
::= { tstpTraps 36 }
tmnxSdpBndStpExcepCondStateChng NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpException
}
STATUS current
DESCRIPTION "The tmnxSdpBndStpExcepCondStateChng notification is
generated when the value of the object sdpBindTlsStpException
has changed, i.e. when the exception condition
changes on the indicated SDP Bind."
::= { tstpTraps 38 }
-- ----------------------------------------------------------------------------
-- Conformance Information
-- ----------------------------------------------------------------------------
tmnxSdpCompliances OBJECT IDENTIFIER ::= { tmnxSdpConformance 1 }
tmnxSdpGroups OBJECT IDENTIFIER ::= { tmnxSdpConformance 2 }
-- ----------------------------------------------
-- Compliance Statements
-- ----------------------------------------------
tmnxSdp77x0V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs
on Alcatel 7750 SR and 7710 SR series systems."
MODULE -- this module
MANDATORY-GROUPS
{
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindIpipeV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV6v0Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group
}
::= { tmnxSdpCompliances 8 }
tmnxSdp7450V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs
on Alcatel 7450 ESS series systems."
MODULE -- this module
MANDATORY-GROUPS
{
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
-- tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindIpipeV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV6v0Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group
-- tmnxSdpBindCpipeV6v0Group
}
::= { tmnxSdpCompliances 9 }
-- Object groups
tmnxSdpV6v0Group OBJECT-GROUP
OBJECTS {
sdpNumEntries,
sdpNextFreeId,
sdpId,
sdpRowStatus,
sdpDelivery,
sdpFarEndIpAddress,
sdpLspList,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpOperPathMtu,
sdpKeepAliveAdminStatus,
sdpKeepAliveOperStatus,
sdpKeepAliveHelloTime,
sdpKeepAliveMaxDropCount,
sdpKeepAliveHoldDownTime,
sdpLastMgmtChange,
sdpKeepAliveNumHelloRequestMessages,
sdpKeepAliveNumHelloResponseMessages,
sdpKeepAliveNumLateHelloResponseMessages,
sdpKeepAliveHelloRequestTimeout,
sdpLdpEnabled,
sdpVlanVcEtype,
sdpAdvertisedVllMtuOverride,
sdpOperFlags,
sdpLastStatusChange,
sdpMvplsMgmtService,
sdpMvplsMgmtSdpBndId,
sdpCollectAcctStats,
sdpAccountingPolicyId,
sdpClassFwdingEnabled,
sdpClassFwdingDefaultLsp,
sdpClassFwdingMcLsp,
sdpMetric,
sdpAutoSdp,
sdpSnmpAllowed,
sdpPBBEtype,
sdpBandwidthBookingFactor,
sdpOperBandwidth,
sdpAvailableBandwidth,
sdpAdminPathMtu,
sdpKeepAliveHelloMessageLength
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP base feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 100 }
tmnxSdpBindV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindId,
sdpBindRowStatus,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindLastMgmtChange,
sdpBindType,
sdpBindIngressMacFilterId,
sdpBindIngressIpFilterId,
sdpBindEgressMacFilterId,
sdpBindEgressIpFilterId,
sdpBindVpnId,
sdpBindCustId,
sdpBindVcType,
sdpBindVlanVcTag,
sdpBindSplitHorizonGrp,
sdpBindOperFlags,
sdpBindLastStatusChange,
sdpBindIesIfIndex,
sdpBindMacPinning,
sdpBindIngressIpv6FilterId,
sdpBindEgressIpv6FilterId,
sdpBindCollectAcctStats,
sdpBindAccountingPolicyId,
sdpBindPwPeerStatusBits,
sdpBindPeerVccvCvBits,
sdpBindPeerVccvCcBits,
sdpBindControlWordBit,
sdpBindOperControlWord,
sdpBindEndPoint,
sdpBindEndPointPrecedence,
sdpBindIsICB,
sdpBindPwFaultInetAddressType,
sdpBindClassFwdingOperState,
sdpBindForceVlanVcForwarding,
sdpBindAdminBandwidth,
sdpBindOperBandwidth,
sdpBindBaseStatsIngressForwardedPackets,
sdpBindBaseStatsIngressDroppedPackets,
sdpBindBaseStatsEgressForwardedPackets,
sdpBindBaseStatsEgressForwardedOctets,
sdpBindBaseStatsCustId,
sdpBindBaseStatsIngFwdOctets,
sdpBindBaseStatsIngDropOctets,
sdpBindAdminIngressLabel,
sdpBindAdminEgressLabel,
sdpBindOperIngressLabel,
sdpBindOperEgressLabel,
sdpBindPwFaultInetAddress,
sdpBindIpipeCeInetAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 101 }
tmnxSdpBindTlsV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsStpAdminStatus,
sdpBindTlsStpPriority,
sdpBindTlsStpPortNum,
sdpBindTlsStpPathCost,
sdpBindTlsStpRapidStart,
sdpBindTlsStpBpduEncap,
sdpBindTlsStpPortState,
sdpBindTlsStpDesignatedBridge,
sdpBindTlsStpDesignatedPort,
sdpBindTlsStpForwardTransitions,
sdpBindTlsStpInConfigBpdus,
sdpBindTlsStpInTcnBpdus,
sdpBindTlsStpInBadBpdus,
sdpBindTlsStpOutConfigBpdus,
sdpBindTlsStpOutTcnBpdus,
sdpBindTlsStpOperBpduEncap,
sdpBindTlsStpVpnId,
sdpBindTlsStpCustId,
sdpBindTlsMacAddressLimit,
sdpBindTlsNumMacAddresses,
sdpBindTlsNumStaticMacAddresses,
sdpBindTlsMacLearning,
sdpBindTlsMacAgeing,
sdpBindTlsStpOperEdge,
sdpBindTlsStpAdminPointToPoint,
sdpBindTlsStpPortRole,
sdpBindTlsStpAutoEdge,
sdpBindTlsStpOperProtocol,
sdpBindTlsStpInRstBpdus,
sdpBindTlsStpOutRstBpdus,
sdpBindTlsLimitMacMove,
sdpBindTlsDiscardUnknownSource,
sdpBindTlsMvplsPruneState,
sdpBindTlsMvplsMgmtService,
sdpBindTlsMvplsMgmtSdpBndId,
sdpBindTlsStpException,
sdpBindTlsL2ptTermination,
sdpBindTlsBpduTranslation,
sdpBindTlsStpRootGuard,
sdpBindTlsStpInMstBpdus,
sdpBindTlsStpOutMstBpdus,
sdpBindTlsStpRxdDesigBridge,
sdpBindTlsMacMoveNextUpTime,
sdpBindTlsMacMoveRateExcdLeft,
sdpBindTlsLimitMacMoveLevel,
sdpBindTlsBpduTransOper,
sdpBindTlsL2ptProtocols,
sdpBindTlsIgnoreStandbySig,
sdpBindTlsBlockOnMeshFail
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind TLS feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 102 }
tmnxSdpBindMeshV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindMeshTlsPortState,
sdpBindMeshTlsNotInMstRegion,
sdpBindMeshTlsHoldDownTimer,
sdpBindMeshTlsTransitionState
}
STATUS current
DESCRIPTION
"The group of objects supporting mesh SDP bind feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 103 }
tmnxSdpApipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindApipeAdminConcatCellCount,
sdpBindApipeSigConcatCellCount,
sdpBindApipeOperConcatCellCount,
sdpBindApipeConcatMaxDelay,
sdpBindApipeConcatCellClp,
sdpBindApipeConcatCellAal5Fr
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP A-Pipe feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 104 }
tmnxSdpBindDhcpV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindDhcpDescription,
sdpBindDhcpSnoop,
sdpBindDhcpStatsClntSnoopdPckts,
sdpBindDhcpStatsSrvrSnoopdPckts,
sdpBindDhcpStatsClntForwdPckts,
sdpBindDhcpStatsSrvrForwdPckts,
sdpBindDhcpStatsClntDropdPckts,
sdpBindDhcpStatsSrvrDropdPckts,
sdpBindDhcpStatsClntProxRadPckts,
sdpBindDhcpStatsClntProxLSPckts,
sdpBindDhcpStatsGenReleasePckts,
sdpBindDhcpStatsGenForceRenPckts
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind DHCP feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 105 }
tmnxSdpBindIpipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindIpipeCeInetAddressType
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind I-Pipe feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 106 }
tmnxSdpFCV6v0Group OBJECT-GROUP
OBJECTS {
sdpFCMappingRowStatus,
sdpFCMappingLspId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP FC feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 107 }
tmnxSdpBindCpipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindCpipeLocalPayloadSize,
sdpBindCpipePeerPayloadSize,
sdpBindCpipeLocalBitrate,
sdpBindCpipePeerBitrate,
sdpBindCpipeLocalSigPkts,
sdpBindCpipePeerSigPkts,
sdpBindCpipeLocalCasTrunkFraming,
sdpBindCpipePeerCasTrunkFraming,
sdpBindCpipeLocalUseRtpHeader,
sdpBindCpipePeerUseRtpHeader,
sdpBindCpipeLocalDifferential,
sdpBindCpipePeerDifferential,
sdpBindCpipeLocalTimestampFreq,
sdpBindCpipePeerTimestampFreq
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP bind C-Pipe feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 108 }
tmnxSdpBindTlsL2ptV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsMfibMdaRowStatus,
sdpBindTlsL2ptStatsLastClearedTime,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx,
sdpBindTlsL2ptStatsStpConfigBpdusRx,
sdpBindTlsL2ptStatsStpConfigBpdusTx,
sdpBindTlsL2ptStatsStpRstBpdusRx,
sdpBindTlsL2ptStatsStpRstBpdusTx,
sdpBindTlsL2ptStatsStpTcnBpdusRx,
sdpBindTlsL2ptStatsStpTcnBpdusTx,
sdpBindTlsL2ptStatsPvstConfigBpdusRx,
sdpBindTlsL2ptStatsPvstConfigBpdusTx,
sdpBindTlsL2ptStatsPvstRstBpdusRx,
sdpBindTlsL2ptStatsPvstRstBpdusTx,
sdpBindTlsL2ptStatsPvstTcnBpdusRx,
sdpBindTlsL2ptStatsPvstTcnBpdusTx,
sdpBindTlsL2ptStatsOtherBpdusRx,
sdpBindTlsL2ptStatsOtherBpdusTx,
sdpBindTlsL2ptStatsOtherL2ptBpdusRx,
sdpBindTlsL2ptStatsOtherL2ptBpdusTx,
sdpBindTlsL2ptStatsOtherInvalidBpdusRx,
sdpBindTlsL2ptStatsOtherInvalidBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx,
sdpBindTlsL2ptStatsCdpBpdusRx,
sdpBindTlsL2ptStatsCdpBpdusTx,
sdpBindTlsL2ptStatsVtpBpdusRx,
sdpBindTlsL2ptStatsVtpBpdusTx,
sdpBindTlsL2ptStatsDtpBpdusRx,
sdpBindTlsL2ptStatsDtpBpdusTx,
sdpBindTlsL2ptStatsPagpBpdusRx,
sdpBindTlsL2ptStatsPagpBpdusTx,
sdpBindTlsL2ptStatsUdldBpdusRx,
sdpBindTlsL2ptStatsUdldBpdusTx
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP bind L2pt feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 109 }
tmnxSdpAutoBindV6v0Group OBJECT-GROUP
OBJECTS {
pwTemplateTableLastChanged,
pwTemplateRowStatus,
pwTemplateLastChanged,
pwTemplateVcType,
pwTemplateAccountingPolicyId,
pwTemplateCollectAcctStats,
pwTemplateMacLearning,
pwTemplateMacAgeing,
pwTemplateDiscardUnknownSource,
pwTemplateLimitMacMove,
pwTemplateMacPinning,
pwTemplateMacAddressLimit,
pwTemplateShgName,
pwTemplateShgDescription,
pwTemplateShgRestProtSrcMac,
pwTemplateShgRestUnprotDstMac,
pwTemplateEgressMacFilterId,
pwTemplateEgressIpFilterId,
pwTemplateEgressIpv6FilterId,
pwTemplateIngressMacFilterId,
pwTemplateIngressIpFilterId,
pwTemplateIngressIpv6FilterId,
pwTemplateIgmpFastLeave,
pwTemplateIgmpImportPlcy,
pwTemplateIgmpLastMembIntvl,
pwTemplateIgmpMaxNbrGrps,
pwTemplateIgmpGenQueryIntvl,
pwTemplateIgmpQueryRespIntvl,
pwTemplateIgmpRobustCount,
pwTemplateIgmpSendQueries,
pwTemplateIgmpMcacPolicyName,
pwTemplateIgmpMcacPrRsvMndBW,
pwTemplateIgmpMcacUnconstBW,
pwTemplateIgmpVersion,
pwTemplateIgmpSnpgGrpSrcTblLC,
pwTemplateIgmpSnpgRowStatus,
pwTemplateIgmpSnpgLastChngd,
pwTemplateMfibAllowedMdaTblLC,
pwTemplateMfibMdaRowStatus,
pwTemplateUseProvisionedSdp,
pwTemplateVlanVcTag,
sdpAutoBindBgpInfoTableLC,
sdpAutoBindBgpInfoTemplateId,
sdpAutoBindBgpInfoAGI,
sdpAutoBindBgpInfoSAII,
sdpAutoBindBgpInfoTAII
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP auto-bind feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 112 }
tmnxSdpBindTlsMrpV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsMrpTableLastChanged,
sdpBindTlsMrpLastChngd,
sdpBindTlsMrpJoinTime,
sdpBindTlsMrpLeaveTime,
sdpBindTlsMrpLeaveAllTime,
sdpBindTlsMrpPeriodicTime,
sdpBindTlsMrpPeriodicEnabled,
sdpBindTlsMrpRxPdus,
sdpBindTlsMrpDroppedPdus,
sdpBindTlsMrpTxPdus,
sdpBindTlsMrpRxNewEvent,
sdpBindTlsMrpRxJoinInEvent,
sdpBindTlsMrpRxInEvent,
sdpBindTlsMrpRxJoinEmptyEvent,
sdpBindTlsMrpRxEmptyEvent,
sdpBindTlsMrpRxLeaveEvent,
sdpBindTlsMrpTxNewEvent,
sdpBindTlsMrpTxJoinInEvent,
sdpBindTlsMrpTxInEvent,
sdpBindTlsMrpTxJoinEmptyEvent,
sdpBindTlsMrpTxEmptyEvent,
sdpBindTlsMrpTxLeaveEvent,
sdpBindTlsMmrpDeclared,
sdpBindTlsMmrpRegistered
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP MRP feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 113 }
tmnxSdpTlsBgpV6v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindTblLC,
svcTlsBgpADPWTempBindRowStatus,
svcTlsBgpADPWTempBindLastChngd,
svcTlsBgpADPWTempBindSHG,
svcTlsBgpADPWTempBindRTTblLC,
svcTlsBgpADPWTempBindRTRowStat
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP BGP feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 114 }
tmnxSdpL2V6v0Group OBJECT-GROUP
OBJECTS {
sdpCreationOrigin,
svcL2RteTableLastChanged,
svcL2RteSdpBindId,
svcL2RtePwTemplateId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP L2 Route feature
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 115 }
-- Notification objects
tmnxSdpNotifyObjsV6v0Group OBJECT-GROUP
OBJECTS {
sdpNotifySdpId,
sdpMaxBookableBandwidth,
sdpBookedBandwidth,
dynamicSdpStatus,
dynamicSdpOrigin,
dynamicSdpCreationError,
dynamicSdpBindCreationError
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP notification objects
on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 200 }
-- Obsoleted Group (300)
-- Notification group
tmnxSdpNotifyV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
unacknowledgedTCN,
tmnxSvcTopoChgSdpBindMajorState,
tmnxSvcNewRootSdpBind,
tmnxSvcTopoChgSdpBindState,
tmnxSvcSdpBindRcvdTCN,
tmnxSvcSdpBindRcvdHigherBriPrio,
tmnxSvcSdpBindEncapPVST,
tmnxSvcSdpBindEncapDot1d,
tmnxSvcSdpActiveProtocolChange,
tmnxStpMeshNotInMstRegion,
tmnxSdpBndStpExcepCondStateChng,
sdpStatusChanged,
sdpBindStatusChanged,
sdpTlsMacAddrLimitAlarmRaised,
sdpTlsMacAddrLimitAlarmCleared,
sdpBindDHCPLeaseEntriesExceeded,
sdpBindDHCPLseStateOverride,
sdpBindDHCPLseStatePopulateErr,
sdpBindDHCPSuspiciousPcktRcvd,
sdpBindPwPeerStatusBitsChanged,
sdpBindTlsMacMoveExceeded,
sdpBindPwPeerFaultAddrChanged,
sdpBindDHCPProxyServerError,
sdpBindSdpStateChangeProcessed,
sdpBindDHCPLseStateMobilityErr,
sdpBandwidthOverbooked,
sdpBindInsufficientBandwidth,
dynamicSdpConfigChanged,
dynamicSdpBindConfigChanged,
dynamicSdpCreationFailed,
dynamicSdpBindCreationFailed
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 400 }
tmnxSdpObsoletedNotifyV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpCreated,
sdpDeleted,
sdpBindCreated,
sdpBindDeleted,
sdpTlsDHCPSuspiciousPcktRcvd,
sdpBindDHCPCoAError,
sdpBindDHCPSubAuthError
}
STATUS current
DESCRIPTION
"The group of obsoleted SDP objects on Alcatel 7x50 SR series systems."
::= { tmnxSdpGroups 401 }
END
Reference in New Issue View Git Blame Copy Permalink