mibs/MIBS/polycom/POLYCOM-ENDPOINT-MIB
2023-12-05 12:25:34 +01:00

2750 lines
85 KiB
Plaintext

POLYCOM-ENDPOINT-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Gauge32, Integer32, Unsigned32
FROM SNMPv2-SMI
DisplayString, TruthValue, DateAndTime, TimeInterval, TimeStamp
FROM SNMPv2-TC
InetPortNumber, InetAddressIPv4, InetAddressIPv6, InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
NOTIFICATION-GROUP, OBJECT-GROUP
FROM SNMPv2-CONF
polycom
FROM POLYCOM-BASE-MIB;
polycom-endpoint-MIB MODULE-IDENTITY
LAST-UPDATED "201706091200Z"
ORGANIZATION "Polycom, Inc."
CONTACT-INFO "DL-SNMPWorkingGroup@Polycom.com"
DESCRIPTION "This module is used for monitoring a unified communications network."
REVISION "201706091200Z"
DESCRIPTION "238869-162043"
::= { polycom 101 }
--Notification group
polycom-endpointNotifications OBJECT IDENTIFIER
::= { polycom-endpoint-MIB 0 }
securityFailedAuthAttempt NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableConferenceID,
notificationVariableServerName
}
STATUS current
DESCRIPTION "Notification that an authentication attempt has failed."
::= { polycom-endpointNotifications 17}
securitySuccessfulAuthAttempt NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableConferenceID,
notificationVariableServerName
}
STATUS current
DESCRIPTION "Notification that an authentication attempt has succeeded."
::= { polycom-endpointNotifications 19}
securityPortLocked NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that an port has been locked for security reasons."
::= { polycom-endpointNotifications 21}
securityPortUnlocked NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that an port has been unlocked after being locked for security reasons."
::= { polycom-endpointNotifications 22}
securityAccountLocked NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that an account has been locked for security reasons."
::= { polycom-endpointNotifications 23}
securityAccountUnlocked NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that an account has been unlocked after having been locked for security reasons."
::= { polycom-endpointNotifications 24}
securityConfigChange NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a configuration change has been performed."
::= { polycom-endpointNotifications 25}
softwareUpdateStarted NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a software update operation has begun."
::= { polycom-endpointNotifications 67}
softwareUpdateComplete NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a software update operation has completed."
::= { polycom-endpointNotifications 68}
softwareUpdateFailed NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a software update operation has failed."
::= { polycom-endpointNotifications 69}
h323GateKeeperRegistrationFailed NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an H.323 gatekeeper registration attempt has failed."
::= { polycom-endpointNotifications 70}
h323GateKeeperRegistrationOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous H.323 gatekeeper registration error condition has cleared."
::= { polycom-endpointNotifications 71}
sipRegistrationFailed NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a SIP registration attempt has failed."
::= { polycom-endpointNotifications 72}
sipRegistrationOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous SIP registration error condition has cleared."
::= { polycom-endpointNotifications 73}
isdnLineDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that an ISDN or V.35 interface is down or reporting an error."
::= { polycom-endpointNotifications 74}
isdnLineUp NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a previous ISDN or V.35 interface error condition has cleared."
::= { polycom-endpointNotifications 75}
primaryCameraDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that the primary camera has been disconnected or reports an error."
::= { polycom-endpointNotifications 76}
primaryCameraOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a previous primary camera error condition has cleared."
::= { polycom-endpointNotifications 77}
callConnected NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a conference has started or a participant has joined."
::= { polycom-endpointNotifications 78}
callDisconnected NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a conference has ended or a participant has departed."
::= { polycom-endpointNotifications 79}
callFailed NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a call attempt has failed."
::= { polycom-endpointNotifications 80}
jitterExcessive NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that excessive jitter has been detected."
::= { polycom-endpointNotifications 81}
jitterOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a previous excessive jitter condition has been cleared."
::= { polycom-endpointNotifications 82}
latencyExcessive NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that excessive latency has been detected."
::= { polycom-endpointNotifications 83}
latencyOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a previous excessive latency condition has cleared."
::= { polycom-endpointNotifications 84}
packetLossExcessive NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that excessive packet loss has been detected."
::= { polycom-endpointNotifications 85}
packetLossOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID
}
STATUS current
DESCRIPTION "Notification that a previous excessive packet loss condition has cleared."
::= { polycom-endpointNotifications 86}
presenceServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableServerName
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the presence server failed."
::= { polycom-endpointNotifications 87}
presenceServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableServerName
}
STATUS current
DESCRIPTION "Notification that a previous presence server error condition has cleared."
::= { polycom-endpointNotifications 88}
cdrServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the CDR server failed."
::= { polycom-endpointNotifications 89}
cdrServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous CDR server error condition has cleared."
::= { polycom-endpointNotifications 90}
syslogServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the syslog server failed."
::= { polycom-endpointNotifications 91}
syslogServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous syslog server error condition has cleared."
::= { polycom-endpointNotifications 92}
softwareUpdateServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the software update server has failed."
::= { polycom-endpointNotifications 93}
softwareUpdateServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous software update server error condition has cleared."
::= { polycom-endpointNotifications 94}
provisioningServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the provisioning server has failed."
::= { polycom-endpointNotifications 95}
provisioningServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous software provisioning server error condition has cleared."
::= { polycom-endpointNotifications 96}
calendarServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the calendar server has failed."
::= { polycom-endpointNotifications 97}
calendarServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous calendar server error condition has cleared."
::= { polycom-endpointNotifications 98}
directoryServerDown NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that an attempt to connect to the directory server has failed."
::= { polycom-endpointNotifications 99}
directoryServerOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID
}
STATUS current
DESCRIPTION "Notification that a previous directory server error condition has cleared."
::= { polycom-endpointNotifications 100}
remoteControlBatteryLow NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that the remote control battery level is low."
::= { polycom-endpointNotifications 101}
remoteControlBatteryOK NOTIFICATION-TYPE
OBJECTS {
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity
}
STATUS current
DESCRIPTION "Notification that a previous low remote control battery condition has cleared."
::= { polycom-endpointNotifications 102}
--Object group
polycom-endpointObjects OBJECT IDENTIFIER
::= { polycom-endpoint-MIB 1 }
--Section
identity OBJECT IDENTIFIER
::= { polycom-endpointObjects 1 }
-- Scalar
identitySoftwareInfo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information about software currently installed on the device."
::= { identity 1 }
-- Scalar
identityBuildDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date this product was built."
::= { identity 2 }
-- Scalar
identityDeviceType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This device's type."
::= { identity 3 }
-- Scalar
identityDeviceModel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device's model."
::= { identity 4 }
-- Scalar
identityDeviceSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device's serial number."
::= { identity 5 }
-- Scalar
identityStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The overall status of the device."
::= { identity 6 }
-- Scalar
identityDebugMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this device in debug mode?"
::= { identity 7 }
-- Scalar
identityConsoleAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is access to the console enabled?"
::= { identity 8 }
-- Scalar
identityMIBVersionSupported OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version of this MIB that this agent is using."
::= { identity 9 }
-- Scalar
identityLastDataUpdateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time any data in this MIB was updated."
::= { identity 10 }
--Section
service OBJECT IDENTIFIER
::= { polycom-endpointObjects 2 }
--Group
serviceH323 OBJECT IDENTIFIER
::= { service 7 }
-- Scalar
serviceH323Status OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "H323 stack enabled/disabled on the reporting device."
::= { serviceH323 1 }
-- Scalar
serviceH323RegistrationStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "H323 registration status."
::= { serviceH323 2 }
-- Table
serviceH323GatekeeperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ServiceH323GatekeeperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of gatekeepers status information"
::= { serviceH323 3 }
-- Entry
serviceH323GatekeeperEntry OBJECT-TYPE
SYNTAX ServiceH323GatekeeperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of gatekeepers status information"
INDEX {
serviceH323GatekeeperIndex
}
::= { serviceH323GatekeeperTable 1 }
-- Sequence
ServiceH323GatekeeperEntry ::= SEQUENCE {
serviceH323GatekeeperIndex Unsigned32,
serviceH323GatekeeperStatus INTEGER,
serviceH323GatekeeperH239Enabled Integer32
}
--Index
serviceH323GatekeeperIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { serviceH323GatekeeperEntry 1 }
-- Column
serviceH323GatekeeperStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the gatekeeper."
::= { serviceH323GatekeeperEntry 2 }
-- Column
serviceH323GatekeeperH239Enabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "H239 enabled."
::= { serviceH323GatekeeperEntry 3 }
--Group
serviceSip OBJECT IDENTIFIER
::= { service 8 }
-- Scalar
serviceSipStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SIP stack enabled/disabled on the reporting device."
::= { serviceSip 1 }
-- Table
serviceSipProxyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ServiceSipProxyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SIP proxies status information"
::= { serviceSip 2 }
-- Entry
serviceSipProxyEntry OBJECT-TYPE
SYNTAX ServiceSipProxyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SIP proxies status information"
INDEX {
serviceSipProxyIndex
}
::= { serviceSipProxyTable 1 }
-- Sequence
ServiceSipProxyEntry ::= SEQUENCE {
serviceSipProxyIndex Unsigned32,
serviceSipProxyStatus INTEGER
}
--Index
serviceSipProxyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { serviceSipProxyEntry 1 }
-- Column
serviceSipProxyStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the SIP proxy."
::= { serviceSipProxyEntry 2 }
-- Table
serviceSipRegistrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF ServiceSipRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SIP registration status information"
::= { serviceSip 3 }
-- Entry
serviceSipRegistrationEntry OBJECT-TYPE
SYNTAX ServiceSipRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SIP registration status information"
INDEX {
serviceSipRegistrationIndex
}
::= { serviceSipRegistrationTable 1 }
-- Sequence
ServiceSipRegistrationEntry ::= SEQUENCE {
serviceSipRegistrationIndex Unsigned32,
serviceSipRegistrationStatus INTEGER
}
--Index
serviceSipRegistrationIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { serviceSipRegistrationEntry 1 }
-- Column
serviceSipRegistrationStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SIP registration status."
::= { serviceSipRegistrationEntry 2 }
--Group
serviceIsdn OBJECT IDENTIFIER
::= { service 9 }
-- Scalar
serviceIsdnStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The roll-up of the status information in the table."
::= { serviceIsdn 1 }
--Group
serviceSecurity OBJECT IDENTIFIER
::= { service 10 }
-- Scalar
serviceSecurityProfile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the security profile in use."
::= { serviceSecurity 1 }
--Section
hardware OBJECT IDENTIFIER
::= { polycom-endpointObjects 3 }
-- Scalar
hardwareOverallStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The overall status of this agent's hardware."
::= { hardware 1 }
--Group
hardwareMicrophone OBJECT IDENTIFIER
::= { hardware 5 }
-- Scalar
hardwareMicrophoneStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Roll-up of the microphones operational status info from the table."
::= { hardwareMicrophone 1 }
-- Table
hardwareMicrophoneMicrophonesTable OBJECT-TYPE
SYNTAX SEQUENCE OF HardwareMicrophoneMicrophonesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of microphones status information."
::= { hardwareMicrophone 2 }
-- Entry
hardwareMicrophoneMicrophonesEntry OBJECT-TYPE
SYNTAX HardwareMicrophoneMicrophonesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of microphones status information."
INDEX {
hardwareMicrophoneMicrophonesIndex
}
::= { hardwareMicrophoneMicrophonesTable 1 }
-- Sequence
HardwareMicrophoneMicrophonesEntry ::= SEQUENCE {
hardwareMicrophoneMicrophonesIndex Unsigned32,
hardwareMicrophoneMicrophonesName DisplayString,
hardwareMicrophoneMicrophonesStatus INTEGER
}
--Index
hardwareMicrophoneMicrophonesIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { hardwareMicrophoneMicrophonesEntry 1 }
-- Column
hardwareMicrophoneMicrophonesName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The microphone's display name."
::= { hardwareMicrophoneMicrophonesEntry 2 }
-- Column
hardwareMicrophoneMicrophonesStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The microphone's operational status."
::= { hardwareMicrophoneMicrophonesEntry 3 }
--Group
hardwareCamera OBJECT IDENTIFIER
::= { hardware 6 }
-- Scalar
hardwareCameraStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Roll-up of the camera operational status info from the table."
::= { hardwareCamera 1 }
-- Table
hardwareCameraCamerasTable OBJECT-TYPE
SYNTAX SEQUENCE OF HardwareCameraCamerasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of cameras status information."
::= { hardwareCamera 2 }
-- Entry
hardwareCameraCamerasEntry OBJECT-TYPE
SYNTAX HardwareCameraCamerasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of cameras status information."
INDEX {
hardwareCameraCamerasIndex
}
::= { hardwareCameraCamerasTable 1 }
-- Sequence
HardwareCameraCamerasEntry ::= SEQUENCE {
hardwareCameraCamerasIndex Unsigned32,
hardwareCameraCamerasName DisplayString,
hardwareCameraCamerasStatus INTEGER
}
--Index
hardwareCameraCamerasIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { hardwareCameraCamerasEntry 1 }
-- Column
hardwareCameraCamerasName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The camera display name."
::= { hardwareCameraCamerasEntry 2 }
-- Column
hardwareCameraCamerasStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The camera's operational status."
::= { hardwareCameraCamerasEntry 3 }
--Group
hardwareNIC OBJECT IDENTIFIER
::= { hardware 10 }
-- Scalar
hardwareNICStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Roll-up of the status info from all the status entries in the table."
::= { hardwareNIC 1 }
-- Table
hardwareNICNICsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HardwareNICNICsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NICs status information."
::= { hardwareNIC 2 }
-- Entry
hardwareNICNICsEntry OBJECT-TYPE
SYNTAX HardwareNICNICsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NICs status information."
INDEX {
hardwareNICNICsIndex
}
::= { hardwareNICNICsTable 1 }
-- Sequence
HardwareNICNICsEntry ::= SEQUENCE {
hardwareNICNICsIndex Unsigned32,
hardwareNICNICsName DisplayString,
hardwareNICNICsMAC DisplayString,
hardwareNICNICsSpeed Unsigned32,
hardwareNICNICsDuplex DisplayString,
hardwareNICNICsStatus INTEGER,
hardwareNICNICsIPType Integer32
}
--Index
hardwareNICNICsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { hardwareNICNICsEntry 1 }
-- Column
hardwareNICNICsName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the network interface card."
::= { hardwareNICNICsEntry 2 }
-- Column
hardwareNICNICsMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of the network interface card."
::= { hardwareNICNICsEntry 3 }
-- Column
hardwareNICNICsSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The speed of the network interface card (Mbps)."
::= { hardwareNICNICsEntry 4 }
-- Column
hardwareNICNICsDuplex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The duplex mode of the network interface card."
::= { hardwareNICNICsEntry 5 }
-- Column
hardwareNICNICsStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the hardware network interface card."
::= { hardwareNICNICsEntry 6 }
-- Column
hardwareNICNICsIPType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supported IP versions."
::= { hardwareNICNICsEntry 7 }
--Group
hardwarePTC OBJECT IDENTIFIER
::= { hardware 11 }
-- Scalar
hardwarePTCStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Roll-up of the status info from all entries in the table."
::= { hardwarePTC 1 }
-- Table
hardwarePTCPTCsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HardwarePTCPTCsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTCs status information."
::= { hardwarePTC 2 }
-- Entry
hardwarePTCPTCsEntry OBJECT-TYPE
SYNTAX HardwarePTCPTCsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTCs status information."
INDEX {
hardwarePTCPTCsIndex
}
::= { hardwarePTCPTCsTable 1 }
-- Sequence
HardwarePTCPTCsEntry ::= SEQUENCE {
hardwarePTCPTCsIndex Unsigned32,
hardwarePTCPTCsStatus DisplayString
}
--Index
hardwarePTCPTCsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { hardwarePTCPTCsEntry 1 }
-- Column
hardwarePTCPTCsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the Polycom Touch Control peripheral."
::= { hardwarePTCPTCsEntry 2 }
--Group
hardwareUcBoard OBJECT IDENTIFIER
::= { hardware 12 }
-- Scalar
hardwareUcBoardStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall operational status of the boards."
::= { hardwareUcBoard 1 }
-- Table
hardwareUcBoardUcBoardsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HardwareUcBoardUcBoardsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of UcBoards status information."
::= { hardwareUcBoard 2 }
-- Entry
hardwareUcBoardUcBoardsEntry OBJECT-TYPE
SYNTAX HardwareUcBoardUcBoardsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of UcBoards status information."
INDEX {
hardwareUcBoardUcBoardsIndex
}
::= { hardwareUcBoardUcBoardsTable 1 }
-- Sequence
HardwareUcBoardUcBoardsEntry ::= SEQUENCE {
hardwareUcBoardUcBoardsIndex Unsigned32,
hardwareUcBoardUcBoardsStatus DisplayString
}
--Index
hardwareUcBoardUcBoardsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { hardwareUcBoardUcBoardsEntry 1 }
-- Column
hardwareUcBoardUcBoardsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the board."
::= { hardwareUcBoardUcBoardsEntry 2 }
--Section
call OBJECT IDENTIFIER
::= { polycom-endpointObjects 4 }
-- Table
callActiveCallsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CallActiveCallsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { call 1 }
-- Entry
callActiveCallsEntry OBJECT-TYPE
SYNTAX CallActiveCallsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX {
callActiveCallsIndex
}
::= { callActiveCallsTable 1 }
-- Sequence
CallActiveCallsEntry ::= SEQUENCE {
callActiveCallsIndex Unsigned32,
callActiveCallsCallID DisplayString,
callActiveCallsConfID DisplayString,
callActiveCallsVoiceJitterRX Unsigned32,
callActiveCallsVoiceJitterTX Unsigned32,
callActiveCallsVoiceLatencyRX Unsigned32,
callActiveCallsVoiceLatencyTX Unsigned32,
callActiveCallsVoicePacketLossRX Unsigned32,
callActiveCallsVoicePacketLossTX Unsigned32,
callActiveCallsVoiceProtocolRX DisplayString,
callActiveCallsVoiceProtocolTX DisplayString,
callActiveCallsMaxVoiceJitterRX Unsigned32,
callActiveCallsMaxVoiceJitterTX Unsigned32,
callActiveCallsTotalPacketsLostRX Unsigned32,
callActiveCallsTotalPacketsLostTX Unsigned32,
callActiveCallsPctPacketLostRX Unsigned32,
callActiveCallsPctPacketLostTX Unsigned32,
callActiveCallsOverallLatencyRX Unsigned32,
callActiveCallsOverallLatencyTX Unsigned32,
callActiveCallsOverallJitterRX Unsigned32,
callActiveCallsOverallJitterTX Unsigned32,
callActiveCallsContentFormatRsltnRX DisplayString,
callActiveCallsContentFormatRsltnTX DisplayString,
callActiveCallsContentFrameRateRX DisplayString,
callActiveCallsContentFrameRateTX DisplayString,
callActiveCallsContentJitterRX Unsigned32,
callActiveCallsContentJitterTX Unsigned32,
callActiveCallsContentLatencyRX Unsigned32,
callActiveCallsContentLatencyTX Unsigned32,
callActiveCallsContentPacketLossRX Unsigned32,
callActiveCallsContentPacketLossTX Unsigned32,
callActiveCallsContentProtocolRX DisplayString,
callActiveCallsContentProtocolTX DisplayString,
callActiveCallsContentRateRX Unsigned32,
callActiveCallsContentRateTX Unsigned32,
callActiveCallsContentRateUsedRX Unsigned32,
callActiveCallsContentRateUsedTX Unsigned32,
callActiveCallsVideoAnnexRX DisplayString,
callActiveCallsVideoAnnexTX DisplayString,
callActiveCallsVideoFECErrorsRX Unsigned32,
callActiveCallsVideoFECErrorsTX Unsigned32,
callActiveCallsVideoRsltnRX DisplayString,
callActiveCallsVideoRsltnTX DisplayString,
callActiveCallsVideoFrameRateRX DisplayString,
callActiveCallsVideoFrameRateTX DisplayString,
callActiveCallsVideoJitterRX Unsigned32,
callActiveCallsVideoJitterTX Unsigned32,
callActiveCallsVideoLatencyRX Unsigned32,
callActiveCallsVideoLatencyTX Unsigned32,
callActiveCallsVideoPacketLossRX Unsigned32,
callActiveCallsVideoPacketLossTX Unsigned32,
callActiveCallsVideoProtocolRX DisplayString,
callActiveCallsVideoProtocolTX DisplayString,
callActiveCallsVideoRateRX Unsigned32,
callActiveCallsVideoRateTX Unsigned32,
callActiveCallsVideoRateUsedRX Unsigned32,
callActiveCallsVideoRateUsedTX Unsigned32,
callActiveCallsFarSiteName DisplayString,
callActiveCallsFarSiteSystemType DisplayString,
callActiveCallsCallType DisplayString,
callActiveCallsEncryption DisplayString,
callActiveCallsPrecedenceLevel DisplayString,
callActiveCallsSendingContent TruthValue
}
--Index
callActiveCallsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { callActiveCallsEntry 1 }
-- Column
callActiveCallsCallID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The CallID of the call this entry refers to."
::= { callActiveCallsEntry 2 }
-- Column
callActiveCallsConfID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ID of the conf this call is a part of."
::= { callActiveCallsEntry 3 }
-- Column
callActiveCallsVoiceJitterRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive voice jitter."
::= { callActiveCallsEntry 4 }
-- Column
callActiveCallsVoiceJitterTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit voice jitter."
::= { callActiveCallsEntry 5 }
-- Column
callActiveCallsVoiceLatencyRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive voice latency."
::= { callActiveCallsEntry 6 }
-- Column
callActiveCallsVoiceLatencyTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit voice latency."
::= { callActiveCallsEntry 7 }
-- Column
callActiveCallsVoicePacketLossRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive voice packet loss."
::= { callActiveCallsEntry 8 }
-- Column
callActiveCallsVoicePacketLossTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit voice packet loss."
::= { callActiveCallsEntry 9 }
-- Column
callActiveCallsVoiceProtocolRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive voice protocol."
::= { callActiveCallsEntry 10 }
-- Column
callActiveCallsVoiceProtocolTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit voice protocol."
::= { callActiveCallsEntry 11 }
-- Column
callActiveCallsMaxVoiceJitterRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive voice max jitter."
::= { callActiveCallsEntry 12 }
-- Column
callActiveCallsMaxVoiceJitterTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit voice max jitter."
::= { callActiveCallsEntry 13 }
-- Column
callActiveCallsTotalPacketsLostRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive total packets lost."
::= { callActiveCallsEntry 14 }
-- Column
callActiveCallsTotalPacketsLostTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit total packets lost."
::= { callActiveCallsEntry 15 }
-- Column
callActiveCallsPctPacketLostRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive percentage packets lost."
::= { callActiveCallsEntry 16 }
-- Column
callActiveCallsPctPacketLostTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit percentage packets lost."
::= { callActiveCallsEntry 17 }
-- Column
callActiveCallsOverallLatencyRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive overall latency."
::= { callActiveCallsEntry 18 }
-- Column
callActiveCallsOverallLatencyTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit overall latency."
::= { callActiveCallsEntry 19 }
-- Column
callActiveCallsOverallJitterRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive overall latency."
::= { callActiveCallsEntry 20 }
-- Column
callActiveCallsOverallJitterTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit overall latency."
::= { callActiveCallsEntry 21 }
-- Column
callActiveCallsContentFormatRsltnRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content format."
::= { callActiveCallsEntry 22 }
-- Column
callActiveCallsContentFormatRsltnTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content format."
::= { callActiveCallsEntry 23 }
-- Column
callActiveCallsContentFrameRateRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content frame rate."
::= { callActiveCallsEntry 24 }
-- Column
callActiveCallsContentFrameRateTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content frame rate."
::= { callActiveCallsEntry 25 }
-- Column
callActiveCallsContentJitterRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content jitter."
::= { callActiveCallsEntry 26 }
-- Column
callActiveCallsContentJitterTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content jitter."
::= { callActiveCallsEntry 27 }
-- Column
callActiveCallsContentLatencyRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content latency."
::= { callActiveCallsEntry 28 }
-- Column
callActiveCallsContentLatencyTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content latency."
::= { callActiveCallsEntry 29 }
-- Column
callActiveCallsContentPacketLossRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive packet loss."
::= { callActiveCallsEntry 30 }
-- Column
callActiveCallsContentPacketLossTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit packet loss."
::= { callActiveCallsEntry 31 }
-- Column
callActiveCallsContentProtocolRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content protocol."
::= { callActiveCallsEntry 32 }
-- Column
callActiveCallsContentProtocolTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content protocol."
::= { callActiveCallsEntry 33 }
-- Column
callActiveCallsContentRateRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive content protocol."
::= { callActiveCallsEntry 34 }
-- Column
callActiveCallsContentRateTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit content rate."
::= { callActiveCallsEntry 35 }
-- Column
callActiveCallsContentRateUsedRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive used content rate."
::= { callActiveCallsEntry 36 }
-- Column
callActiveCallsContentRateUsedTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit used content rate."
::= { callActiveCallsEntry 37 }
-- Column
callActiveCallsVideoAnnexRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video annex receive protocol."
::= { callActiveCallsEntry 38 }
-- Column
callActiveCallsVideoAnnexTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video annex transmit protocol."
::= { callActiveCallsEntry 39 }
-- Column
callActiveCallsVideoFECErrorsRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video forward error corection receive."
::= { callActiveCallsEntry 40 }
-- Column
callActiveCallsVideoFECErrorsTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Video forward error corection transmit."
::= { callActiveCallsEntry 41 }
-- Column
callActiveCallsVideoRsltnRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { callActiveCallsEntry 42 }
-- Column
callActiveCallsVideoRsltnTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { callActiveCallsEntry 43 }
-- Column
callActiveCallsVideoFrameRateRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video frame rate."
::= { callActiveCallsEntry 44 }
-- Column
callActiveCallsVideoFrameRateTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video frame rate."
::= { callActiveCallsEntry 45 }
-- Column
callActiveCallsVideoJitterRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video jitter."
::= { callActiveCallsEntry 46 }
-- Column
callActiveCallsVideoJitterTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video jitter."
::= { callActiveCallsEntry 47 }
-- Column
callActiveCallsVideoLatencyRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video lantency."
::= { callActiveCallsEntry 48 }
-- Column
callActiveCallsVideoLatencyTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video lantency."
::= { callActiveCallsEntry 49 }
-- Column
callActiveCallsVideoPacketLossRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video packet loss."
::= { callActiveCallsEntry 50 }
-- Column
callActiveCallsVideoPacketLossTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video packet loss."
::= { callActiveCallsEntry 51 }
-- Column
callActiveCallsVideoProtocolRX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video protocol."
::= { callActiveCallsEntry 52 }
-- Column
callActiveCallsVideoProtocolTX OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video protocol."
::= { callActiveCallsEntry 53 }
-- Column
callActiveCallsVideoRateRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video rate."
::= { callActiveCallsEntry 54 }
-- Column
callActiveCallsVideoRateTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video rate."
::= { callActiveCallsEntry 55 }
-- Column
callActiveCallsVideoRateUsedRX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive video rate used."
::= { callActiveCallsEntry 56 }
-- Column
callActiveCallsVideoRateUsedTX OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit video rate used."
::= { callActiveCallsEntry 57 }
-- Column
callActiveCallsFarSiteName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Far end display name."
::= { callActiveCallsEntry 58 }
-- Column
callActiveCallsFarSiteSystemType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Far end system type."
::= { callActiveCallsEntry 59 }
-- Column
callActiveCallsCallType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Call type."
::= { callActiveCallsEntry 60 }
-- Column
callActiveCallsEncryption OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption algorithm used."
::= { callActiveCallsEntry 61 }
-- Column
callActiveCallsPrecedenceLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { callActiveCallsEntry 62 }
-- Column
callActiveCallsSendingContent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Content sharing indicator."
::= { callActiveCallsEntry 63 }
--Section
conference OBJECT IDENTIFIER
::= { polycom-endpointObjects 5 }
-- Scalar
conferenceNumberActiveConferences OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ongoing conferences."
::= { conference 1 }
--Section
externalIntegration OBJECT IDENTIFIER
::= { polycom-endpointObjects 6 }
-- Scalar
externalIntegrationStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overal status of the external services integration."
::= { externalIntegration 1 }
--Group
externalIntegrationPresence OBJECT IDENTIFIER
::= { externalIntegration 7 }
-- Scalar
externalIntegrationPresenceStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the Presence service."
::= { externalIntegrationPresence 1 }
--Group
externalIntegrationCDR OBJECT IDENTIFIER
::= { externalIntegration 8 }
-- Scalar
externalIntegrationCDRStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the CDR service."
::= { externalIntegrationCDR 1 }
--Group
externalIntegrationSyslog OBJECT IDENTIFIER
::= { externalIntegration 9 }
-- Scalar
externalIntegrationSyslogStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the Syslog service."
::= { externalIntegrationSyslog 1 }
--Group
externalIntegrationSoftwareUpdate OBJECT IDENTIFIER
::= { externalIntegration 10 }
-- Scalar
externalIntegrationSoftwareUpdateStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the Software Update service."
::= { externalIntegrationSoftwareUpdate 1 }
--Group
externalIntegrationProvisioning OBJECT IDENTIFIER
::= { externalIntegration 11 }
-- Scalar
externalIntegrationProvisioningStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the Provisioning service."
::= { externalIntegrationProvisioning 1 }
--Group
externalIntegrationExchange OBJECT IDENTIFIER
::= { externalIntegration 12 }
-- Scalar
externalIntegrationExchangeStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the integration with the Exchange service."
::= { externalIntegrationExchange 1 }
-- Table
externalIntegrationExchangeServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalIntegrationExchangeServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Exchange servers integration status information."
::= { externalIntegrationExchange 2 }
-- Entry
externalIntegrationExchangeServerEntry OBJECT-TYPE
SYNTAX ExternalIntegrationExchangeServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Exchange servers integration status information."
INDEX {
externalIntegrationExchangeServerIndex
}
::= { externalIntegrationExchangeServerTable 1 }
-- Sequence
ExternalIntegrationExchangeServerEntry ::= SEQUENCE {
externalIntegrationExchangeServerIndex Unsigned32,
externalIntegrationExchangeServerName DisplayString,
externalIntegrationExchangeServerIpAddress InetAddress,
externalIntegrationExchangeServerSubscriptionStatus INTEGER,
externalIntegrationExchangeServerMeetingsScheduledToday Unsigned32,
externalIntegrationExchangeServerIntegrator DisplayString
}
--Index
externalIntegrationExchangeServerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { externalIntegrationExchangeServerEntry 1 }
-- Column
externalIntegrationExchangeServerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display name."
::= { externalIntegrationExchangeServerEntry 2 }
-- Column
externalIntegrationExchangeServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address."
::= { externalIntegrationExchangeServerEntry 3 }
-- Column
externalIntegrationExchangeServerSubscriptionStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
unavailable(2),
error(3),
disabled(4),
ignoredNoEnterpriseDirectory(5),
ignoredMailboxNotFound(6),
authFailed(7),
subscriptionPending(8),
subscriptionOK(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subscription status."
::= { externalIntegrationExchangeServerEntry 4 }
-- Column
externalIntegrationExchangeServerMeetingsScheduledToday OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of meetings scheduled for today."
::= { externalIntegrationExchangeServerEntry 5 }
-- Column
externalIntegrationExchangeServerIntegrator OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates which single member of the supercluster performed the integration to the Exchange Server"
::= { externalIntegrationExchangeServerEntry 6 }
--Group
externalIntegrationDirectorySvcs OBJECT IDENTIFIER
::= { externalIntegration 13 }
-- Scalar
externalIntegrationDirectorySvcsStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational status."
::= { externalIntegrationDirectorySvcs 1 }
-- Table
externalIntegrationDirectorySvcsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalIntegrationDirectorySvcsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { externalIntegrationDirectorySvcs 3 }
-- Entry
externalIntegrationDirectorySvcsServerEntry OBJECT-TYPE
SYNTAX ExternalIntegrationDirectorySvcsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX {
externalIntegrationDirectorySvcsServerIndex
}
::= { externalIntegrationDirectorySvcsServerTable 1 }
-- Sequence
ExternalIntegrationDirectorySvcsServerEntry ::= SEQUENCE {
externalIntegrationDirectorySvcsServerIndex Unsigned32,
externalIntegrationDirectorySvcsServerStatus INTEGER,
externalIntegrationDirectorySvcsServerId DisplayString,
externalIntegrationDirectorySvcsServerCacheStatus INTEGER,
externalIntegrationDirectorySvcsServerConnectionSecure TruthValue,
externalIntegrationDirectorySvcsServerCacheRefreshDate DateAndTime,
externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms Unsigned32,
externalIntegrationDirectorySvcsServerIntegrator DisplayString
}
--Index
externalIntegrationDirectorySvcsServerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Primary index for this table."
::= { externalIntegrationDirectorySvcsServerEntry 1 }
-- Column
externalIntegrationDirectorySvcsServerStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ok(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Directory service operational status."
::= { externalIntegrationDirectorySvcsServerEntry 2 }
-- Column
externalIntegrationDirectorySvcsServerId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user ID of the service account used to integrate with enterprise directory."
::= { externalIntegrationDirectorySvcsServerEntry 3 }
-- Column
externalIntegrationDirectorySvcsServerCacheStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
connecting(2),
integratedWithEncryption(3),
integratedWithoutEncryption(4),
failed(5),
outdated(6),
failedNoSuchEnterpriseUser(7),
failedEnterpriseAuthentication(8),
failedInvalidEnterpriseCredentials(9),
failedEnterpriseAuthenticationWithCode(10),
failedConnection(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the enterprise directory caching."
::= { externalIntegrationDirectorySvcsServerEntry 4 }
-- Column
externalIntegrationDirectorySvcsServerConnectionSecure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether the connection is secure or not."
::= { externalIntegrationDirectorySvcsServerEntry 5 }
-- Column
externalIntegrationDirectorySvcsServerCacheRefreshDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of last cache refresh."
::= { externalIntegrationDirectorySvcsServerEntry 6 }
-- Column
externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of enterprise conference rooms generated by enterprise directory integration."
::= { externalIntegrationDirectorySvcsServerEntry 7 }
-- Column
externalIntegrationDirectorySvcsServerIntegrator OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the cluster integrating with the enterprise directory service."
::= { externalIntegrationDirectorySvcsServerEntry 8 }
--Group
externalIntegrationNTP OBJECT IDENTIFIER
::= { externalIntegration 15 }
--Section
notificationVariable OBJECT IDENTIFIER
::= { polycom-endpointObjects 99 }
-- Scalar
notificationVariableNodeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 1 }
-- Scalar
notificationVariableReportingNodeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 2 }
-- Scalar
notificationVariableType OBJECT-TYPE
SYNTAX INTEGER {
problem(1),
resolution(2),
info(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 3 }
-- Scalar
notificationVariableClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 4 }
-- Scalar
notificationVariableKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 5 }
-- Scalar
notificationVariableSummary OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION ""
::= { notificationVariable 6 }
-- Scalar
notificationVariableSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
informational(6),
debug(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The notification's severity level."
::= { notificationVariable 7 }
-- Scalar
notificationVariableValueOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "For threshold notifications this object points to the OID where the current value can be retrieved."
::= { notificationVariable 8 }
-- Scalar
notificationVariableThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "For threshold notifications this object contains the value of the threshold that was breached."
::= { notificationVariable 9 }
-- Scalar
notificationVariableConferenceID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This object contains the conference ID with which the notification is associated."
::= { notificationVariable 10 }
-- Scalar
notificationVariableServerName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This object contains the name of the server the notification reports about."
::= { notificationVariable 11 }
polycom-endpointMIBConformance OBJECT IDENTIFIER ::= { polycom-endpoint-MIB 2 }
polycom-endpointMIBGroups OBJECT IDENTIFIER ::= { polycom-endpointMIBConformance 2 }
identityObjects OBJECT-GROUP
OBJECTS {
identitySoftwareInfo,
identityBuildDate,
identityDeviceType,
identityDeviceModel,
identityDeviceSerialNumber,
identityStatus,
identityDebugMode,
identityConsoleAccess,
identityMIBVersionSupported,
identityLastDataUpdateTime
}
STATUS current
DESCRIPTION "Contains all objects in the identity section"
::= { polycom-endpointMIBGroups 1 }
serviceObjects OBJECT-GROUP
OBJECTS {
serviceH323Status,
serviceH323RegistrationStatus,
serviceH323GatekeeperIndex,
serviceH323GatekeeperStatus,
serviceH323GatekeeperH239Enabled,
serviceSipStatus,
serviceSipProxyIndex,
serviceSipProxyStatus,
serviceSipRegistrationIndex,
serviceSipRegistrationStatus,
serviceIsdnStatus,
serviceSecurityProfile
}
STATUS current
DESCRIPTION "Contains all objects in the service section"
::= { polycom-endpointMIBGroups 2 }
hardwareObjects OBJECT-GROUP
OBJECTS {
hardwareOverallStatus,
hardwareMicrophoneStatus,
hardwareMicrophoneMicrophonesIndex,
hardwareMicrophoneMicrophonesName,
hardwareMicrophoneMicrophonesStatus,
hardwareCameraStatus,
hardwareCameraCamerasIndex,
hardwareCameraCamerasName,
hardwareCameraCamerasStatus,
hardwareNICStatus,
hardwareNICNICsIndex,
hardwareNICNICsName,
hardwareNICNICsMAC,
hardwareNICNICsSpeed,
hardwareNICNICsDuplex,
hardwareNICNICsStatus,
hardwareNICNICsIPType,
hardwarePTCStatus,
hardwarePTCPTCsIndex,
hardwarePTCPTCsStatus,
hardwareUcBoardStatus,
hardwareUcBoardUcBoardsIndex,
hardwareUcBoardUcBoardsStatus
}
STATUS current
DESCRIPTION "Contains all objects in the hardware section"
::= { polycom-endpointMIBGroups 3 }
callObjects OBJECT-GROUP
OBJECTS {
callActiveCallsIndex,
callActiveCallsCallID,
callActiveCallsConfID,
callActiveCallsVoiceJitterRX,
callActiveCallsVoiceJitterTX,
callActiveCallsVoiceLatencyRX,
callActiveCallsVoiceLatencyTX,
callActiveCallsVoicePacketLossRX,
callActiveCallsVoicePacketLossTX,
callActiveCallsVoiceProtocolRX,
callActiveCallsVoiceProtocolTX,
callActiveCallsMaxVoiceJitterRX,
callActiveCallsMaxVoiceJitterTX,
callActiveCallsTotalPacketsLostRX,
callActiveCallsTotalPacketsLostTX,
callActiveCallsPctPacketLostRX,
callActiveCallsPctPacketLostTX,
callActiveCallsOverallLatencyRX,
callActiveCallsOverallLatencyTX,
callActiveCallsOverallJitterRX,
callActiveCallsOverallJitterTX,
callActiveCallsContentFormatRsltnRX,
callActiveCallsContentFormatRsltnTX,
callActiveCallsContentFrameRateRX,
callActiveCallsContentFrameRateTX,
callActiveCallsContentJitterRX,
callActiveCallsContentJitterTX,
callActiveCallsContentLatencyRX,
callActiveCallsContentLatencyTX,
callActiveCallsContentPacketLossRX,
callActiveCallsContentPacketLossTX,
callActiveCallsContentProtocolRX,
callActiveCallsContentProtocolTX,
callActiveCallsContentRateRX,
callActiveCallsContentRateTX,
callActiveCallsContentRateUsedRX,
callActiveCallsContentRateUsedTX,
callActiveCallsVideoAnnexRX,
callActiveCallsVideoAnnexTX,
callActiveCallsVideoFECErrorsRX,
callActiveCallsVideoFECErrorsTX,
callActiveCallsVideoRsltnRX,
callActiveCallsVideoRsltnTX,
callActiveCallsVideoFrameRateRX,
callActiveCallsVideoFrameRateTX,
callActiveCallsVideoJitterRX,
callActiveCallsVideoJitterTX,
callActiveCallsVideoLatencyRX,
callActiveCallsVideoLatencyTX,
callActiveCallsVideoPacketLossRX,
callActiveCallsVideoPacketLossTX,
callActiveCallsVideoProtocolRX,
callActiveCallsVideoProtocolTX,
callActiveCallsVideoRateRX,
callActiveCallsVideoRateTX,
callActiveCallsVideoRateUsedRX,
callActiveCallsVideoRateUsedTX,
callActiveCallsFarSiteName,
callActiveCallsFarSiteSystemType,
callActiveCallsCallType,
callActiveCallsEncryption,
callActiveCallsPrecedenceLevel,
callActiveCallsSendingContent
}
STATUS current
DESCRIPTION "Contains all objects in the call section"
::= { polycom-endpointMIBGroups 4 }
conferenceObjects OBJECT-GROUP
OBJECTS {
conferenceNumberActiveConferences
}
STATUS current
DESCRIPTION "Contains all objects in the conference section"
::= { polycom-endpointMIBGroups 5 }
externalIntegrationObjects OBJECT-GROUP
OBJECTS {
externalIntegrationStatus,
externalIntegrationPresenceStatus,
externalIntegrationCDRStatus,
externalIntegrationSyslogStatus,
externalIntegrationSoftwareUpdateStatus,
externalIntegrationProvisioningStatus,
externalIntegrationExchangeStatus,
externalIntegrationExchangeServerIndex,
externalIntegrationExchangeServerName,
externalIntegrationExchangeServerIpAddress,
externalIntegrationExchangeServerSubscriptionStatus,
externalIntegrationExchangeServerMeetingsScheduledToday,
externalIntegrationExchangeServerIntegrator,
externalIntegrationDirectorySvcsStatus,
externalIntegrationDirectorySvcsServerIndex,
externalIntegrationDirectorySvcsServerStatus,
externalIntegrationDirectorySvcsServerId,
externalIntegrationDirectorySvcsServerCacheStatus,
externalIntegrationDirectorySvcsServerConnectionSecure,
externalIntegrationDirectorySvcsServerCacheRefreshDate,
externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms,
externalIntegrationDirectorySvcsServerIntegrator
}
STATUS current
DESCRIPTION "Contains all objects in the externalIntegration section"
::= { polycom-endpointMIBGroups 6 }
notificationVariableObjects OBJECT-GROUP
OBJECTS {
notificationVariableNodeName,
notificationVariableReportingNodeName,
notificationVariableType,
notificationVariableClass,
notificationVariableKey,
notificationVariableSummary,
notificationVariableSeverity,
notificationVariableValueOID,
notificationVariableThreshold,
notificationVariableConferenceID,
notificationVariableServerName
}
STATUS current
DESCRIPTION "Contains all objects in the notificationVariable section"
::= { polycom-endpointMIBGroups 7 }
notificationObjects NOTIFICATION-GROUP
NOTIFICATIONS {
securityFailedAuthAttempt,
securitySuccessfulAuthAttempt,
securityAccountLocked,
securityAccountUnlocked,
securityConfigChange,
softwareUpdateStarted,
softwareUpdateComplete,
softwareUpdateFailed,
h323GateKeeperRegistrationFailed,
h323GateKeeperRegistrationOK,
sipRegistrationFailed,
sipRegistrationOK,
isdnLineDown,
isdnLineUp,
primaryCameraDown,
primaryCameraOK,
callConnected,
callDisconnected,
callFailed,
jitterExcessive,
jitterOK,
latencyExcessive,
latencyOK,
packetLossExcessive,
packetLossOK,
presenceServerDown,
presenceServerOK,
cdrServerDown,
cdrServerOK,
syslogServerDown,
syslogServerOK,
softwareUpdateServerDown,
softwareUpdateServerOK,
provisioningServerDown,
provisioningServerOK,
calendarServerDown,
calendarServerOK,
directoryServerDown,
directoryServerOK,
remoteControlBatteryLow,
remoteControlBatteryOK
}
STATUS current
DESCRIPTION "Contains all of the notification objects"
::= { polycom-endpointMIBGroups 99 }
END