4272 lines
128 KiB
Plaintext
4272 lines
128 KiB
Plaintext
--
|
|
-- RADWIN Management Information Base (MIB)
|
|
-- Generated 01/05/16 14:23:32 Version: 10.2.40_b9653
|
|
--
|
|
RADWIN-MIB-WINLINK1000 DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, IpAddress, Counter, Gauge, TimeTicks
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString, ifIndex
|
|
FROM RFC1213-MIB
|
|
TRAP-TYPE
|
|
FROM RFC-1215;
|
|
|
|
|
|
radwin OBJECT IDENTIFIER ::= { enterprises 4458 }
|
|
winlink1000 OBJECT IDENTIFIER ::= { radwin 1000 }
|
|
|
|
-- ###########################################################
|
|
-- ODU
|
|
-- ###########################################################
|
|
|
|
winlink1000Odu OBJECT IDENTIFIER ::= { winlink1000 1 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Admin
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAdmin OBJECT IDENTIFIER ::= { winlink1000Odu 1 }
|
|
|
|
winlink1000OduAdmProductType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU configuration description."
|
|
::= { winlink1000OduAdmin 1 }
|
|
|
|
winlink1000OduAdmHwRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Hardware Version."
|
|
::= { winlink1000OduAdmin 2 }
|
|
|
|
winlink1000OduAdmSwRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Software Version."
|
|
::= { winlink1000OduAdmin 3 }
|
|
|
|
winlink1000OduAdmLinkName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link Name. A change is effective immediately."
|
|
::= { winlink1000OduAdmin 4 }
|
|
|
|
winlink1000OduAdmResetCmd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reset Command.
|
|
A set command with a value of 3 will cause a device reset.
|
|
HBS only: A set command with a value of 4 will cause a device reset for the entire sector.
|
|
The read value is always 0."
|
|
::= { winlink1000OduAdmin 5 }
|
|
|
|
winlink1000OduAdmAddres OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IP address. A change is effective after reset.
|
|
The parameter is kept for backward compatibility.
|
|
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended."
|
|
::= { winlink1000OduAdmin 6 }
|
|
|
|
winlink1000OduAdmMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Subnet Mask. A change is effective after reset.
|
|
The parameter is kept for backward compatibility.
|
|
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended."
|
|
::= { winlink1000OduAdmin 7 }
|
|
|
|
winlink1000OduAdmGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU default gateway. A change is effective after reset.
|
|
The parameter is kept for backward compatibility.
|
|
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended."
|
|
::= { winlink1000OduAdmin 8 }
|
|
|
|
winlink1000OduAdmBroadcast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is reserved for the Manager application provided with the product."
|
|
::= { winlink1000OduAdmin 10 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Admin Hosts Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAdmHostsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAdmHostsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destinations table. Each trap destination is defined by an IP address and a UDP port.
|
|
Up to 10 addresses can be configured."
|
|
::= { winlink1000OduAdmin 12 }
|
|
|
|
winlink1000OduAdmHostsEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAdmHostsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destinations table entry."
|
|
INDEX { winlink1000OduAdmHostsIndex }
|
|
::= { winlink1000OduAdmHostsTable 1 }
|
|
|
|
Winlink1000OduAdmHostsEntry ::= SEQUENCE {
|
|
winlink1000OduAdmHostsIndex
|
|
INTEGER,
|
|
winlink1000OduAdmHostsIp
|
|
IpAddress,
|
|
winlink1000OduAdmHostsPort
|
|
INTEGER,
|
|
winlink1000OduAdmHostsSecurityModel
|
|
INTEGER,
|
|
winlink1000OduAdmHostsUserName
|
|
DisplayString,
|
|
winlink1000OduAdmHostsPassword
|
|
DisplayString,
|
|
winlink1000OduAdmHostsIPv6
|
|
DisplayString
|
|
}
|
|
|
|
winlink1000OduAdmHostsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destinations table index."
|
|
::= { winlink1000OduAdmHostsEntry 1 }
|
|
|
|
winlink1000OduAdmHostsIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destination IP address. A change is effective immediately."
|
|
::= { winlink1000OduAdmHostsEntry 2 }
|
|
|
|
winlink1000OduAdmHostsPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"UDP port of the trap destination. A change is effective immediately."
|
|
::= { winlink1000OduAdmHostsEntry 3 }
|
|
|
|
winlink1000OduAdmHostsSecurityModel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snmpv1(1),
|
|
snmpv3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Security model used for this trap generation."
|
|
::= { winlink1000OduAdmHostsEntry 4 }
|
|
|
|
winlink1000OduAdmHostsUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User name used to generate the snmpv3 trap."
|
|
::= { winlink1000OduAdmHostsEntry 5 }
|
|
|
|
winlink1000OduAdmHostsPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Password used to generate the snmpv3 trap."
|
|
::= { winlink1000OduAdmHostsEntry 6 }
|
|
|
|
winlink1000OduAdmHostsIPv6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destination IPv6 address. A change is effective immediately."
|
|
::= { winlink1000OduAdmHostsEntry 7 }
|
|
|
|
winlink1000OduBuzzerAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter controls the activation of the buzzer while the unit is in install mode.
|
|
A change is effective immediately. The valid values are: disabled (0), enabledAuto (1), enabledConstantly(2), advancedAuto (3)."
|
|
::= { winlink1000OduAdmin 13 }
|
|
|
|
winlink1000OduProductId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is reserved for the Manager application provided with the product."
|
|
::= { winlink1000OduAdmin 14 }
|
|
|
|
winlink1000OduReadCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Read Community String. This parameter always returns ***** when retrieving its value.
|
|
It is used by the Manager application to change the Read Community String.
|
|
The SNMP agent accepts only encrypted values."
|
|
::= { winlink1000OduAdmin 15 }
|
|
|
|
winlink1000OduReadWriteCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Read/Write Community String. This parameter always returns ***** when retrieving its value.
|
|
It is used by the Manager application to change the Read/Write Community String.
|
|
The SNMP agent accepts only encrypted values."
|
|
::= { winlink1000OduAdmin 16 }
|
|
|
|
winlink1000OduTrapCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap Community String. This parameter is used by the Manager application to change the Trap Community String.
|
|
The SNMP agent accepts only encrypted values."
|
|
::= { winlink1000OduAdmin 17 }
|
|
|
|
winlink1000OduAdmSnmpAgentVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Major version of the SNMP agent."
|
|
::= { winlink1000OduAdmin 18 }
|
|
|
|
winlink1000OduAdmRemoteSiteName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote site name. Returns the same value as sysLocation parameter of the remote site."
|
|
::= { winlink1000OduAdmin 19 }
|
|
|
|
winlink1000OduAdmSnmpAgentMinorVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minor version of the SNMP agent."
|
|
::= { winlink1000OduAdmin 20 }
|
|
|
|
winlink1000OduAdmLinkPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link Password. This parameter always returns ***** when retrieving its value.
|
|
It is used by the Manager application to change the Link Password.
|
|
The SNMP agent accepts only encrypted values."
|
|
::= { winlink1000OduAdmin 21 }
|
|
|
|
winlink1000OduAdmSiteLinkPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Site Link Password. This parameter always returns ***** when retrieving its value.
|
|
It is used by the Manager application to change the Link Password of the site.
|
|
The SNMP agent accepts only encrypted values."
|
|
::= { winlink1000OduAdmin 22 }
|
|
|
|
winlink1000OduAdmDefaultPassword OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
nonDefault(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates if the current Link Password is the default password."
|
|
::= { winlink1000OduAdmin 23 }
|
|
|
|
winlink1000OduAdmConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
directConnection(1),
|
|
indirectConnection(2),
|
|
unknown(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates if the Manager application is connected to the local ODU
|
|
or to the remote ODU over the air. A value of 'unknown' indicates community string mismatch."
|
|
::= { winlink1000OduAdmin 24 }
|
|
|
|
winlink1000OduAdmBackToFactorySettingsCmd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
withIP(1),
|
|
withoutIP(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Back to factory settings Command. A change is effective after reset.
|
|
The read value is always 0."
|
|
::= { winlink1000OduAdmin 25 }
|
|
|
|
winlink1000OduAdmIpParamsCnfg OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IP address Configuration. The format is: |||"
|
|
::= { winlink1000OduAdmin 26 }
|
|
|
|
winlink1000OduAdmVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN ID. Valid values are 1 to 4094.
|
|
Initial value is 0 meaning VLAN unaware."
|
|
::= { winlink1000OduAdmin 27 }
|
|
|
|
winlink1000OduAdmVlanPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN Priority. 0 is lowest priority, 7 is highest priority."
|
|
::= { winlink1000OduAdmin 28 }
|
|
|
|
winlink1000OduAdmSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Serial Number"
|
|
::= { winlink1000OduAdmin 29 }
|
|
|
|
winlink1000OduAdmProductName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the product name as it exists at EC"
|
|
::= { winlink1000OduAdmin 30 }
|
|
|
|
winlink1000OduAdmActivationKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Activates a general key."
|
|
::= { winlink1000OduAdmin 31 }
|
|
|
|
winlink1000OduAdmRmtPermittedOduType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mobile Application: permitted partner OduType."
|
|
::= { winlink1000OduAdmin 32 }
|
|
|
|
winlink1000OduAdmCpuID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CPU ID"
|
|
::= { winlink1000OduAdmin 33 }
|
|
|
|
winlink1000OduAdmOvrdCmd OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ability to perform special command in the ODU."
|
|
::= { winlink1000OduAdmin 34 }
|
|
|
|
winlink1000OduAdmLinkMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pmpHbs (1),
|
|
pmpHsu (2),
|
|
pmpHsuHyb (3),
|
|
pmpHbsHyb (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unit PMP operation mode."
|
|
::= { winlink1000OduAdmin 35 }
|
|
|
|
winlink1000OduAdmActualConnectMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
ptp (2),
|
|
ptmp (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unit connected as part to ptp or ptmp."
|
|
::= { winlink1000OduAdmin 36 }
|
|
|
|
winlink1000OduAdmAES256Support OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"AES-256 security support indication."
|
|
::= { winlink1000OduAdmin 37 }
|
|
|
|
winlink1000OduAdmAES256State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable AES-256 security mode over the air link."
|
|
::= { winlink1000OduAdmin 38 }
|
|
|
|
winlink1000OduAdmAES256Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notOperating (1),
|
|
partiallyOperating (2),
|
|
operating (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"AES256 operating status"
|
|
::= { winlink1000OduAdmin 39 }
|
|
|
|
winlink1000OduAdmBatterySavingShutdownTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Battery Saving Shutdown Time in minutes, 0 till battery run out, -1 if not supported."
|
|
::= { winlink1000OduAdmin 40 }
|
|
|
|
winlink1000OduAdmWiFiPowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined (1),
|
|
powerON (2),
|
|
powerOFF (3),
|
|
alwaysON (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WIFI unit power mode."
|
|
::= { winlink1000OduAdmin 41 }
|
|
|
|
winlink1000OduAdmShutdownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shutdown Timer in seconds."
|
|
::= { winlink1000OduAdmin 42 }
|
|
|
|
winlink1000OduAdmGPSState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined (1),
|
|
notSynchronized (2),
|
|
fixed (3),
|
|
shortCircuit (4),
|
|
faulty (5),
|
|
synchronized (6),
|
|
synchronizedGlonass (7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GPS state"
|
|
::= { winlink1000OduAdmin 43 }
|
|
|
|
winlink1000OduAdmTemperatureC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The temperature (Celsius) inside the Board."
|
|
::= { winlink1000OduAdmin 44 }
|
|
|
|
winlink1000OduAdmIPStackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4 (1),
|
|
v6 (2),
|
|
v4andv6 (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP stack mode."
|
|
::= { winlink1000OduAdmin 45 }
|
|
|
|
winlink1000OduAdmIPv6ParamsCnfg OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IPv6 address Configuration. The format is: |||"
|
|
::= { winlink1000OduAdmin 46 }
|
|
|
|
winlink1000OduAdmIPv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IPv6 address."
|
|
::= { winlink1000OduAdmin 47 }
|
|
|
|
winlink1000OduAdmIPv6Prefix OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IPv6 subnet mask."
|
|
::= { winlink1000OduAdmin 48 }
|
|
|
|
winlink1000OduAdmIPv6DefaultGateWay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU IPv6 default gateway."
|
|
::= { winlink1000OduAdmin 49 }
|
|
|
|
winlink1000OduAdmPowerConsumption OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Power Consumption (mWatt)"
|
|
::= { winlink1000OduAdmin 50 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Wifi
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAdmWifi OBJECT IDENTIFIER ::= { winlink1000OduAdmin 51 }
|
|
|
|
winlink1000OduAdmWifiChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi Channel"
|
|
::= { winlink1000OduAdmWifi 1 }
|
|
|
|
winlink1000OduAdmWifiTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (11..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi TX Power"
|
|
::= { winlink1000OduAdmWifi 2 }
|
|
|
|
winlink1000OduAdmWifiSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi SSID"
|
|
::= { winlink1000OduAdmWifi 3 }
|
|
|
|
winlink1000OduAdmWifiSecurityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (1),
|
|
wep (2),
|
|
wpa2 (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi Security type"
|
|
::= { winlink1000OduAdmWifi 4 }
|
|
|
|
winlink1000OduAdmWifiPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi Password"
|
|
::= { winlink1000OduAdmWifi 5 }
|
|
|
|
winlink1000OduAdmWifiNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi Network"
|
|
::= { winlink1000OduAdmWifi 6 }
|
|
|
|
winlink1000OduAdmWifiRssi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi RSSI"
|
|
::= { winlink1000OduAdmWifi 7 }
|
|
|
|
winlink1000OduAdmWifiStationMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi Station MAC"
|
|
::= { winlink1000OduAdmWifi 8 }
|
|
|
|
winlink1000OduAdmWifiRestart OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A set command with a value of 1 will cause a Wifi restart.
|
|
The read value is always 0."
|
|
::= { winlink1000OduAdmWifi 9 }
|
|
|
|
winlink1000OduAdmWifiApStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
on (2),
|
|
connected (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wifi AP Status"
|
|
::= { winlink1000OduAdmWifi 10 }
|
|
|
|
winlink1000OduAdmBsaOperationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive (1),
|
|
hbsTracking (2),
|
|
hsuAlignment (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BSA Operation Mode"
|
|
::= { winlink1000OduAdmin 52 }
|
|
|
|
winlink1000OduAdmMngConnection OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Management Connection"
|
|
::= { winlink1000OduAdmin 53 }
|
|
|
|
winlink1000OduAdm1588TCSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates that 1588TC license activated"
|
|
::= { winlink1000OduAdmin 54 }
|
|
|
|
winlink1000OduAdmSyncESupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ndicates that SyncE license activated"
|
|
::= { winlink1000OduAdmin 55 }
|
|
|
|
winlink1000OduAdmRadioRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Radio Revision"
|
|
::= { winlink1000OduAdmin 56 }
|
|
|
|
winlink1000OduAdmProductRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Product Revision"
|
|
::= { winlink1000OduAdmin 57 }
|
|
|
|
winlink1000OduAdmPMPSUSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates that PMP SU license is activated"
|
|
::= { winlink1000OduAdmin 58 }
|
|
|
|
winlink1000OduAdmManagerDownloadURL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the URL from which management tool can be downloaded"
|
|
::= { winlink1000OduAdmin 59 }
|
|
|
|
winlink1000OduAdmAntennaDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The is a description of the antenna connected to the ODU"
|
|
::= { winlink1000OduAdmin 60 }
|
|
|
|
winlink1000OduAdmSwCapabilities OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is used to describe which Software Capabilities the current ODU supports"
|
|
::= { winlink1000OduAdmin 61 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Service
|
|
-- ###########################################################
|
|
|
|
winlink1000OduService OBJECT IDENTIFIER ::= { winlink1000Odu 2 }
|
|
|
|
winlink1000OduSrvMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
installMode (1),
|
|
normalMode (2),
|
|
slaveMode (3),
|
|
tempInstallMode (4),
|
|
inactiveMode (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"System mode. The only values that can be set are installMode and slaveMode;
|
|
normalMode reserved to the Manager application provided with the product.
|
|
A change is effective after link re-synchronization."
|
|
::= { winlink1000OduService 1 }
|
|
|
|
winlink1000OduSrvBridging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bridging Mode. Valid values are: disabled (0), enabled (1)."
|
|
::= { winlink1000OduService 3 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Ring Topology
|
|
-- ###########################################################
|
|
|
|
winlink1000OduServiceRingTopology OBJECT IDENTIFIER ::= { winlink1000OduService 4 }
|
|
|
|
winlink1000OduSrvRingLinkMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
independentLink (1),
|
|
nonRpl (2),
|
|
rpl (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mode of the link regarding ring topology."
|
|
::= { winlink1000OduServiceRingTopology 1 }
|
|
|
|
winlink1000OduSrvRingTopologySupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ring Topology, options are: supported, not supported"
|
|
::= { winlink1000OduServiceRingTopology 2 }
|
|
|
|
winlink1000OduSrvRingVlanIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduSrvRingVlanIdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ring VLAN IDs table."
|
|
::= { winlink1000OduServiceRingTopology 3 }
|
|
|
|
winlink1000OduSrvRingVlanIdEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduSrvRingVlanIdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN ID of the internal ring messages. Valid values are 1 to 4094.
|
|
Initial value is 0 meaning VLAN unaware."
|
|
INDEX { winlink1000OduSrvRingVlanIdIndex }
|
|
::= { winlink1000OduSrvRingVlanIdTable 1 }
|
|
|
|
Winlink1000OduSrvRingVlanIdEntry ::= SEQUENCE {
|
|
winlink1000OduSrvRingVlanIdIndex
|
|
INTEGER,
|
|
winlink1000OduSrvRingVlanId
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduSrvRingVlanIdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index of VLAN ID of the internal ring messages."
|
|
::= { winlink1000OduSrvRingVlanIdEntry 1 }
|
|
|
|
winlink1000OduSrvRingVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN ID of the internal ring messages. Valid values are 1 to 4094.
|
|
Initial value is 0 meaning VLAN unaware."
|
|
::= { winlink1000OduSrvRingVlanIdEntry 2 }
|
|
|
|
|
|
winlink1000OduSrvRingEthStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unblocked(1),
|
|
blocked(2),
|
|
notApplicable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the Ethernet service blocking state of a Rings link"
|
|
::= { winlink1000OduServiceRingTopology 4 }
|
|
|
|
winlink1000OduSrvRingMaxAllowedTimeFromLastRpm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the minimal time (in ms) required for determination of ring failure."
|
|
::= { winlink1000OduServiceRingTopology 5 }
|
|
|
|
winlink1000OduSrvRingWTR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the minimal time (in ms) required for ring recovery."
|
|
::= { winlink1000OduServiceRingTopology 6 }
|
|
-- ###########################################################
|
|
-- ODU QoS
|
|
-- ###########################################################
|
|
|
|
winlink1000OduServiceQoS OBJECT IDENTIFIER ::= { winlink1000OduService 5 }
|
|
|
|
winlink1000OduSrvQoSMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
notActive (2),
|
|
classVlan (3),
|
|
classDiffserv (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mode of QoS feature."
|
|
::= { winlink1000OduServiceQoS 1 }
|
|
|
|
winlink1000OduSrvQoSConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduSrvQoSConfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"QoS configuration table."
|
|
::= { winlink1000OduServiceQoS 2 }
|
|
|
|
winlink1000OduSrvQoSConfEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduSrvQoSConfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"QoS configuration table."
|
|
INDEX { winlink1000OduSrvQoSConfIndex }
|
|
::= { winlink1000OduSrvQoSConfTable 1 }
|
|
|
|
Winlink1000OduSrvQoSConfEntry ::= SEQUENCE {
|
|
winlink1000OduSrvQoSConfIndex
|
|
INTEGER,
|
|
winlink1000OduSrvConfVlanQGroups
|
|
INTEGER,
|
|
winlink1000OduSrvConfDiffservQGroups
|
|
INTEGER,
|
|
winlink1000OduSrvConfQueMir
|
|
INTEGER,
|
|
winlink1000OduSrvConfQueWeight
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduSrvQoSConfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index of QoS Configuration."
|
|
::= { winlink1000OduSrvQoSConfEntry 1 }
|
|
|
|
winlink1000OduSrvConfVlanQGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frames classification according to VLAN Priority IDs."
|
|
::= { winlink1000OduSrvQoSConfEntry 2 }
|
|
|
|
winlink1000OduSrvConfDiffservQGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..48)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frames classification according to Diffserv."
|
|
::= { winlink1000OduSrvQoSConfEntry 3 }
|
|
|
|
winlink1000OduSrvConfQueMir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Desired Private MIR."
|
|
::= { winlink1000OduSrvQoSConfEntry 4 }
|
|
|
|
winlink1000OduSrvConfQueWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"QoS queueu's weights in percent."
|
|
::= { winlink1000OduSrvQoSConfEntry 5 }
|
|
|
|
winlink1000OduSrvQoSVlanQGroupsSetStr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frames classification according to VLAN IDs string for set."
|
|
::= { winlink1000OduServiceQoS 3 }
|
|
|
|
winlink1000OduSrvQoSDiffservQGroupsSetStr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frames classification according to Diffserv IDs string for set."
|
|
::= { winlink1000OduServiceQoS 4 }
|
|
|
|
winlink1000OduSrvQoSMaxRTQuePercent OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximal percent for RT & NRT queues."
|
|
::= { winlink1000OduServiceQoS 5 }
|
|
|
|
-- ###########################################################
|
|
-- ODU VLAN Configuration
|
|
-- ###########################################################
|
|
|
|
winlink1000OduServiceVlan OBJECT IDENTIFIER ::= { winlink1000OduService 6 }
|
|
|
|
winlink1000OduSrvVlanSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported (1),
|
|
supported(2),
|
|
available(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet port VLAN support and configuration availability indication.
|
|
1 - ODU VLAN Functionality Not Supported
|
|
2 - ODU VLAN Functionality Supported
|
|
3 - ODU VLAN Functionality Supported and Available"
|
|
::= { winlink1000OduServiceVlan 1 }
|
|
|
|
winlink1000OduSrvVlanIngressMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transparent (1),
|
|
untagAll (2),
|
|
filter (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet port ingress VLAN mode."
|
|
::= { winlink1000OduServiceVlan 2 }
|
|
|
|
winlink1000OduSrvVlanEgressMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transparent (1),
|
|
tag (2),
|
|
provider (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet port egress VLAN mode."
|
|
::= { winlink1000OduServiceVlan 3 }
|
|
|
|
winlink1000OduSrvEgressTag OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40947)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU ethernet port egress VLAN tag.
|
|
Right most digit is Vlan priority (0-7),
|
|
other digits compose Vlan Id (2-4094)"
|
|
::= { winlink1000OduServiceVlan 4 }
|
|
|
|
winlink1000OduSrvEgressProviderTag OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40947)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU ethernet port egress Provider VLAN tag.
|
|
Right most digit is Vlan priority (0-7),
|
|
other digits compose Vlan Id (2-4094)"
|
|
::= { winlink1000OduServiceVlan 5 }
|
|
|
|
winlink1000OduSrvVlanIngressAllowedVIDs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU ethernet port VLAN IDs that will not be filtered on ingress.
|
|
w|w|w|w|w|w|w|w| ( where w = {0-4094} and w != 1 )"
|
|
::= { winlink1000OduServiceVlan 6 }
|
|
|
|
winlink1000OduSrvVlanDisable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Disable VLAN functionality. The following values can be set:
|
|
3 - Disable ODU & IDU VLAN Configurations."
|
|
::= { winlink1000OduServiceVlan 7 }
|
|
|
|
winlink1000OduServiceVlanProviderListTPIDstr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the possible Provider TPIDs."
|
|
::= { winlink1000OduServiceVlan 8 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Ethernet
|
|
-- ###########################################################
|
|
|
|
winlink1000OduEthernet OBJECT IDENTIFIER ::= { winlink1000Odu 3 }
|
|
|
|
winlink1000OduEthernetRemainingRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Ethernet bandwidth in bps."
|
|
::= { winlink1000OduEthernet 1 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Ethernet Interface Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduEthernetIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduEthernetIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet Interface table."
|
|
::= { winlink1000OduEthernet 2 }
|
|
|
|
winlink1000OduEthernetIfEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduEthernetIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet Interface table entry."
|
|
INDEX { winlink1000OduEthernetIfIndex }
|
|
::= { winlink1000OduEthernetIfTable 1 }
|
|
|
|
Winlink1000OduEthernetIfEntry ::= SEQUENCE {
|
|
winlink1000OduEthernetIfIndex
|
|
INTEGER,
|
|
winlink1000OduEthernetIfAddress
|
|
DisplayString,
|
|
winlink1000OduEthernetIfAdminStatus
|
|
INTEGER,
|
|
winlink1000OduEthernetIfOperStatus
|
|
INTEGER,
|
|
winlink1000OduEthernetIfFailAction
|
|
INTEGER,
|
|
winlink1000OduEthernetIf1588v2PTPEventRXRate
|
|
INTEGER,
|
|
winlink1000OduEthernetIf1588v2PTPEventTXRate
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduEthernetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Ethernet Interface Index."
|
|
::= { winlink1000OduEthernetIfEntry 1 }
|
|
|
|
winlink1000OduEthernetIfAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU MAC address."
|
|
::= { winlink1000OduEthernetIfEntry 5 }
|
|
|
|
winlink1000OduEthernetIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portAutoSense(1),
|
|
portAutoSense100Mbps(5),
|
|
forceHalfDuplex10Mbps(10),
|
|
forceFullDuplex10Mbps(11),
|
|
forceHalfDuplex100Mbps(15),
|
|
forceFullDuplex100Mbps(16),
|
|
forceFullDuplex1000Mbps(21),
|
|
disablePoePort(254),
|
|
disablePort(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Required state of the interface."
|
|
::= { winlink1000OduEthernetIfEntry 6 }
|
|
|
|
winlink1000OduEthernetIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notConnected(1),
|
|
connectedHalfDuplex10Mbps(10),
|
|
connectedFullDuplex10Mbps(11),
|
|
connectedHalfDuplex100Mbps(15),
|
|
connectedFullDuplex100Mbps(16),
|
|
connectedHalfDuplex1000Mbps(20),
|
|
connectedFullDuplex1000Mbps(21),
|
|
unknown(65535)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current operational state of the interface."
|
|
::= { winlink1000OduEthernetIfEntry 7 }
|
|
|
|
winlink1000OduEthernetIfFailAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
faNoAction(1),
|
|
faForceHalfDuplex10Mbps(10),
|
|
faForceFullDuplex10Mbps(11),
|
|
faDisablePort(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Failure action of the interface."
|
|
::= { winlink1000OduEthernetIfEntry 8 }
|
|
|
|
winlink1000OduEthernetIf1588v2PTPEventRXRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For debug use"
|
|
::= { winlink1000OduEthernetIfEntry 9 }
|
|
|
|
winlink1000OduEthernetIf1588v2PTPEventTXRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For debug use"
|
|
::= { winlink1000OduEthernetIfEntry 10 }
|
|
|
|
winlink1000OduEthernetNumOfPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of ODU network interfaces."
|
|
::= { winlink1000OduEthernet 3 }
|
|
|
|
|
|
winlink1000OduEthernetGbeSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {notSupported(1), supported(2)}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Supported Giga bit Ethernet in ODU."
|
|
::= { winlink1000OduEthernet 4 }
|
|
|
|
winlink1000OduEthernetSfpProperties OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sfp port properties."
|
|
::= { winlink1000OduEthernet 5 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Bridge
|
|
-- ###########################################################
|
|
|
|
winlink1000OduBridge OBJECT IDENTIFIER ::= { winlink1000Odu 4 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Bridge Base
|
|
-- ###########################################################
|
|
|
|
winlink1000OduBridgeBase OBJECT IDENTIFIER ::= { winlink1000OduBridge 1 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Bridge Ports Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduBridgeBasePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduBridgeBasePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Bridge Ports table."
|
|
::= { winlink1000OduBridgeBase 4 }
|
|
|
|
winlink1000OduBridgeBasePortEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduBridgeBasePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Bridge Ports table entry."
|
|
INDEX { winlink1000OduBridgeBasePortIndex }
|
|
::= { winlink1000OduBridgeBasePortTable 1 }
|
|
|
|
Winlink1000OduBridgeBasePortEntry ::= SEQUENCE {
|
|
winlink1000OduBridgeBasePortIndex
|
|
INTEGER,
|
|
winlink1000OduBridgeBaseIfIndex
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduBridgeBasePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Bridge Port Number."
|
|
::= { winlink1000OduBridgeBasePortEntry 1 }
|
|
|
|
winlink1000OduBridgeBaseIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IfIndex corresponding to ODU Bridge port."
|
|
::= { winlink1000OduBridgeBasePortEntry 2 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Bridge Tp
|
|
-- ###########################################################
|
|
|
|
winlink1000OduBridgeTp OBJECT IDENTIFIER ::= { winlink1000OduBridge 4 }
|
|
|
|
winlink1000OduBridgeTpMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU bridge mode.
|
|
A change is effective after reset. Valid values: hubMode (0), bridgeMode (1)."
|
|
::= { winlink1000OduBridgeTp 101 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Transparent Bridge Ports Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduBridgeTpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduBridgeTpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Transparent Bridge Ports table."
|
|
::= { winlink1000OduBridgeTp 3 }
|
|
|
|
winlink1000OduBridgeTpPortEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduBridgeTpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Transparent Bridge Ports table entry."
|
|
INDEX { winlink1000OduBridgeTpPortIndex }
|
|
::= { winlink1000OduBridgeTpPortTable 1 }
|
|
|
|
Winlink1000OduBridgeTpPortEntry ::= SEQUENCE {
|
|
winlink1000OduBridgeTpPortIndex
|
|
INTEGER,
|
|
winlink1000OduBridgeTpPortInFrames
|
|
Counter,
|
|
winlink1000OduBridgeTpPortOutFrames
|
|
Counter,
|
|
winlink1000OduBridgeTpPortInBytes
|
|
Counter,
|
|
winlink1000OduBridgeTpPortOutBytes
|
|
Counter
|
|
}
|
|
|
|
winlink1000OduBridgeTpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Transparent Bridge Port Number."
|
|
::= { winlink1000OduBridgeTpPortEntry 1 }
|
|
|
|
winlink1000OduBridgeTpPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of frames received by this port."
|
|
::= { winlink1000OduBridgeTpPortEntry 3 }
|
|
|
|
winlink1000OduBridgeTpPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of frames transmitted by this port."
|
|
::= { winlink1000OduBridgeTpPortEntry 4 }
|
|
|
|
winlink1000OduBridgeTpPortInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of bytes received by this port."
|
|
::= { winlink1000OduBridgeTpPortEntry 101 }
|
|
|
|
winlink1000OduBridgeTpPortOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of bytes transmitted by this port."
|
|
::= { winlink1000OduBridgeTpPortEntry 102 }
|
|
|
|
winlink1000OduBridgeConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU bridge configuration mode"
|
|
::= { winlink1000OduBridgeTp 102 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Air
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAir OBJECT IDENTIFIER ::= { winlink1000Odu 5 }
|
|
|
|
winlink1000OduAirFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Installation Center Frequency. Valid values are product dependent. A change is effective after link re-synchronization."
|
|
::= { winlink1000OduAir 1 }
|
|
|
|
winlink1000OduAirDesiredRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated parameter, actual behavior is read-only.
|
|
Required Air Rate. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively."
|
|
::= { winlink1000OduAir 2 }
|
|
|
|
winlink1000OduAirSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reserved for the Manager application provided with the product.
|
|
The Sector ID in Point-To-Multi-Point systems."
|
|
::= { winlink1000OduAir 3 }
|
|
|
|
winlink1000OduAirTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Required Transmit power in dBm . This is a nominal value while the actual transmit power includes additional attenuation.
|
|
The min and max values are product specific. A change is effective immediately."
|
|
::= { winlink1000OduAir 4 }
|
|
|
|
winlink1000OduAirSesState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sessionDown (1),
|
|
basicRate (2),
|
|
active (3),
|
|
installation (4),
|
|
scanning (5),
|
|
probing (6),
|
|
transmitting (7),
|
|
activeWithDefaultEncryptionKey (8),
|
|
installationWithDefaultEncryptionKey (9),
|
|
bitFailed (10),
|
|
activeWithVersionsMismatch (11),
|
|
installationWithVersionsMismatch (12),
|
|
inactive (13),
|
|
iduIncompatible (14),
|
|
spectrumAnalysis (15)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Link State. The value is active (3) during normal operation."
|
|
::= { winlink1000OduAir 5 }
|
|
|
|
winlink1000OduAirMstrSlv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates if the device was automatically selected into the radio link master or slave.
|
|
The value is undefined if there is no link.
|
|
The value is relevant only for point to point systems."
|
|
::= { winlink1000OduAir 6 }
|
|
|
|
winlink1000OduAirResync OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this parameter to 1 will cause the link to restart the synchronization process."
|
|
::= { winlink1000OduAir 8 }
|
|
|
|
-- ###########################################################
|
|
-- ODU Air Perf
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirPerf OBJECT IDENTIFIER ::= { winlink1000OduAir 9 }
|
|
|
|
winlink1000OduAirRxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Received Signal Strength in dBm. Relevant only for point to point systems."
|
|
::= { winlink1000OduAirPerf 1 }
|
|
|
|
winlink1000OduAirTotalFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of radio frames."
|
|
::= { winlink1000OduAirPerf 2 }
|
|
|
|
winlink1000OduAirBadFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of received radio frames with CRC error. The value is relevant only for point to point systems ."
|
|
::= { winlink1000OduAirPerf 3 }
|
|
|
|
winlink1000OduAirCurrentRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated parameter. Actual rate of the air interface in Mbps.
|
|
For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively."
|
|
::= { winlink1000OduAirPerf 4 }
|
|
|
|
winlink1000OduAirCurrentRateIdx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index of current air rate."
|
|
::= { winlink1000OduAirPerf 5 }
|
|
|
|
winlink1000OduAirChainsRxPower OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Received Signal Strength of Cpe chains in dBm.
|
|
Chain 1 RSS: (1 Byte)
|
|
Chain 2 RSS: (1 Byte)
|
|
Chain 3 RSS: (1 Byte)"
|
|
::= { winlink1000OduAirPerf 6 }
|
|
|
|
winlink1000OduAirCurrentRateCBW OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CBW of current air rate."
|
|
::= { winlink1000OduAirPerf 7 }
|
|
|
|
winlink1000OduAirCurrentRateGI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GI of current air rate."
|
|
::= { winlink1000OduAirPerf 8 }
|
|
|
|
winlink1000OduAirTxPower36 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated parameter. Actual behavior is read-only."
|
|
::= { winlink1000OduAir 10 }
|
|
|
|
winlink1000OduAirTxPower48 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated parameter. Actual behavior is read-only."
|
|
::= { winlink1000OduAir 11 }
|
|
|
|
winlink1000OduAirCurrentTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Transmit Power in dBm. This is a nominal value while the actual transmit power includes additional attenuation."
|
|
::= { winlink1000OduAir 12 }
|
|
|
|
winlink1000OduAirMinFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum center frequency in MHz."
|
|
::= { winlink1000OduAir 13 }
|
|
|
|
winlink1000OduAirMaxFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum center frequency in MHz."
|
|
::= { winlink1000OduAir 14 }
|
|
|
|
winlink1000OduAirFreqResolution OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Center Frequency resolution.
|
|
Measured in MHz if value < 100, otherwise in KHz."
|
|
::= { winlink1000OduAir 15 }
|
|
|
|
winlink1000OduAirCurrentFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Center Frequency.
|
|
Measured in MHz if center frequency resolution value < 100, otherwise in KHz."
|
|
::= { winlink1000OduAir 16 }
|
|
|
|
winlink1000OduAirNumberOfChannels OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of channels that can be used."
|
|
::= { winlink1000OduAir 17 }
|
|
|
|
-- ###########################################################
|
|
-- Channels Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirChannelsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirChannelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of channels used by automatic channels selection (ACS)."
|
|
::= { winlink1000OduAir 18 }
|
|
|
|
winlink1000OduAirChannelsEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirChannelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ACS channels table entry."
|
|
INDEX { winlink1000OduAirChannelsIndex }
|
|
::= { winlink1000OduAirChannelsTable 1 }
|
|
|
|
Winlink1000OduAirChannelsEntry ::= SEQUENCE {
|
|
winlink1000OduAirChannelsIndex
|
|
INTEGER,
|
|
winlink1000OduAirChannelsFrequency
|
|
INTEGER,
|
|
winlink1000OduAirChannelsOperState
|
|
INTEGER,
|
|
winlink1000OduAirChannelsAvail
|
|
INTEGER,
|
|
winlink1000OduAirChannelsDefaultFreq
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduAirChannelsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel Index."
|
|
::= { winlink1000OduAirChannelsEntry 1 }
|
|
|
|
winlink1000OduAirChannelsFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel frequency in MHz."
|
|
::= { winlink1000OduAirChannelsEntry 2 }
|
|
|
|
winlink1000OduAirChannelsOperState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel state. Can be set by the user.
|
|
Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled.
|
|
A change is effective after link re-synchronization. Valid values: disabled (0), enabled (1).
|
|
Rewriteable only in Point-To-Point products."
|
|
::= { winlink1000OduAirChannelsEntry 3 }
|
|
|
|
winlink1000OduAirChannelsAvail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel state. Product specific and cannot be changed by the user.
|
|
Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled.
|
|
Valid values: disabled (0), enabled (1)."
|
|
::= { winlink1000OduAirChannelsEntry 4 }
|
|
|
|
winlink1000OduAirChannelsDefaultFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default channel's availability for all CBWs.
|
|
The valid values are: forbidden (0), available (1)."
|
|
::= { winlink1000OduAirChannelsEntry 5 }
|
|
|
|
winlink1000OduAirDfsState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Radar detection state. Valid values: disabled (0), enabled (1)."
|
|
::= { winlink1000OduAir 19 }
|
|
|
|
winlink1000OduAirAutoChannelSelectionState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated parameter. Indicating Automatic Channel Selection availability at current channel bandwidth.
|
|
Valid values: disabled (0), enabled (1)."
|
|
::= { winlink1000OduAir 20 }
|
|
|
|
winlink1000OduAirEnableTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicating Transmit power configuration enabled or disabled."
|
|
::= { winlink1000OduAir 21 }
|
|
|
|
winlink1000OduAirMinTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum Transmit power in dBm."
|
|
::= { winlink1000OduAir 22 }
|
|
|
|
-- ###########################################################
|
|
-- Max Tx Power Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirMaxTxPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirMaxTxPowerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Maximum transmit power per air rate, in dBm."
|
|
::= { winlink1000OduAir 23 }
|
|
|
|
winlink1000OduAirMaxTxPowerEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirMaxTxPowerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum Transmit power table entry."
|
|
INDEX { winlink1000OduAirMaxTxPowerIndex }
|
|
::= { winlink1000OduAirMaxTxPowerTable 1 }
|
|
|
|
Winlink1000OduAirMaxTxPowerEntry ::= SEQUENCE {
|
|
winlink1000OduAirMaxTxPowerIndex
|
|
INTEGER,
|
|
winlink1000OduAirMaxTxPower
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduAirMaxTxPowerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Air interface rate index."
|
|
::= { winlink1000OduAirMaxTxPowerEntry 1 }
|
|
|
|
winlink1000OduAirMaxTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum Transmit power in dBm."
|
|
::= { winlink1000OduAirMaxTxPowerEntry 2 }
|
|
|
|
winlink1000OduAirChannelBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel bandwidth in KHz. A change is effective after reset."
|
|
::= { winlink1000OduAir 24 }
|
|
|
|
-- ###########################################################
|
|
-- Channel BW Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirChannelBWTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirChannelBWEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel Bandwidths table."
|
|
::= { winlink1000OduAir 25 }
|
|
|
|
winlink1000OduAirChannelBWEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirChannelBWEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel Bandwidth table entry."
|
|
INDEX { winlink1000OduAirChannelBWIndex }
|
|
::= { winlink1000OduAirChannelBWTable 1 }
|
|
|
|
Winlink1000OduAirChannelBWEntry ::= SEQUENCE {
|
|
winlink1000OduAirChannelBWIndex
|
|
INTEGER,
|
|
winlink1000OduAirChannelBWAvail
|
|
INTEGER,
|
|
winlink1000OduAirChannelsAdminState
|
|
DisplayString,
|
|
winlink1000OduAirChannelBWHSSATDDConflictPerCBW
|
|
INTEGER,
|
|
winlink1000OduAirChannelBWMinRatioForSupporting
|
|
INTEGER,
|
|
winlink1000OduAirChannelBWMaxRatioForSupporting
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduAirChannelBWIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
channelBW5MHz(1),
|
|
channelBW10MHz(2),
|
|
channelBW20MHz(3),
|
|
channelBW40MHz(4),
|
|
channelBW80MHz(5),
|
|
channelBW7MHz(6),
|
|
channelBW14MHz(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel Bandwidth index."
|
|
::= { winlink1000OduAirChannelBWEntry 1 }
|
|
|
|
winlink1000OduAirChannelBWAvail OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
supportedManual(2),
|
|
supportedWithACS(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channel Bandwidth availability, product specific.
|
|
Options are: Not supported, supported with manual channel selection, supported with Automatic Channel Selection."
|
|
::= { winlink1000OduAirChannelBWEntry 2 }
|
|
|
|
winlink1000OduAirChannelsAdminState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Channels' availability per CBW."
|
|
::= { winlink1000OduAirChannelBWEntry 3 }
|
|
|
|
winlink1000OduAirChannelBWHSSATDDConflictPerCBW OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noConflict(1),
|
|
conflictSingle(2),
|
|
conflictDual(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indication for possible Link drop per CBW due to conflict between HSS and ATDD."
|
|
::= { winlink1000OduAirChannelBWEntry 4 }
|
|
|
|
winlink1000OduAirChannelBWMinRatioForSupporting OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW."
|
|
::= { winlink1000OduAirChannelBWEntry 5 }
|
|
|
|
winlink1000OduAirChannelBWMaxRatioForSupporting OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW."
|
|
::= { winlink1000OduAirChannelBWEntry 6 }
|
|
|
|
winlink1000OduAirRFD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current radio frame duration in microseconds."
|
|
::= { winlink1000OduAir 26 }
|
|
|
|
-- ###########################################################
|
|
-- Available Rates Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirRatesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirRatesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Air Rate indexes table for current channel bandwidth."
|
|
::= { winlink1000OduAir 27 }
|
|
|
|
winlink1000OduAirRatesEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirRatesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Air Rate indexes table entry."
|
|
INDEX { winlink1000OduAirRatesIndex }
|
|
::= { winlink1000OduAirRatesTable 1 }
|
|
|
|
Winlink1000OduAirRatesEntry ::= SEQUENCE {
|
|
winlink1000OduAirRatesIndex
|
|
INTEGER,
|
|
winlink1000OduAirRatesAvail
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduAirRatesIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Air Rate index."
|
|
::= { winlink1000OduAirRatesEntry 1 }
|
|
|
|
winlink1000OduAirRatesAvail OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rateNotAvailable(1),
|
|
rateAvailable(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Air Rate availability, depending on air interface conditions."
|
|
::= { winlink1000OduAirRatesEntry 2 }
|
|
|
|
winlink1000OduAirDesiredRateIdx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Required Air Rate index. 0 reserved for Adaptive Rate.
|
|
A change is effective immediately after Set operation to the master side
|
|
while the link is up."
|
|
::= { winlink1000OduAir 28 }
|
|
|
|
winlink1000OduAirLinkDistance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link distance in meters.
|
|
A value of -1 indicates an illegal value and is also used when a link is not established."
|
|
::= { winlink1000OduAir 29 }
|
|
|
|
winlink1000OduAirLinkWorkingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
normal(2),
|
|
fullCompatibilityRemoteUpgradeAvailable(3),
|
|
fullCompatibilityLocalUpgradeAvailable(4),
|
|
restrictedCompatibilityRemoteUpgradeRecomended(5),
|
|
restrictedCompatibilityLocalUpgradeRecomended(6),
|
|
softwareUpgradeRemoteUpgradeRequired(7),
|
|
softwareUpgradeLocalUpgradeRequired(8),
|
|
versionsIncompatibilityRemoteUpgradeRequired(9),
|
|
versionsIncompatibilityLocalUpgradeRequired(10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link working mode as a result of comparing versions of both sides of the link.
|
|
Possible modes are: Unknown - no link, Normal - versions on both sides are identical with full compatibility,
|
|
with restricted compatibility, or versions on both sides are different with software upgrade or versions incompatibility."
|
|
::= { winlink1000OduAir 30 }
|
|
|
|
winlink1000OduAirMajorLinkIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Major link interface version"
|
|
::= { winlink1000OduAir 31 }
|
|
|
|
winlink1000OduAirMinorLinkIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minor link interface version"
|
|
::= { winlink1000OduAir 32 }
|
|
|
|
winlink1000OduAirHss OBJECT IDENTIFIER ::= { winlink1000OduAir 40 }
|
|
|
|
winlink1000OduAirHssDesiredOpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
independentUnit(2),
|
|
hubSyncMaster(3),
|
|
hubSyncClientContinueTx(4),
|
|
hubSyncClientDisableTx(5),
|
|
gpsSync(6),
|
|
independentSyncUnit-ISU(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Required Hub Site Synchronization operating state.
|
|
For HssSyncUnits : For hssISU :[2,7] ,For hssGSU :[2,6]
|
|
For HBS: [2,3,4,5]"
|
|
::= { winlink1000OduAirHss 1 }
|
|
|
|
winlink1000OduAirHssCurrentOpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
independentUnit(2),
|
|
hubSyncMaster(3),
|
|
hubSyncClientContinueTx(4),
|
|
hubSyncClientDisableTx(5),
|
|
gpsSync(6),
|
|
independentSyncUnit-ISU(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Hub Site Synchronization operating state."
|
|
::= { winlink1000OduAirHss 2 }
|
|
|
|
winlink1000OduAirHssSyncStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
notSynchronized(2),
|
|
synchronized(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization sync status."
|
|
::= { winlink1000OduAirHss 3 }
|
|
|
|
winlink1000OduAirHssExtPulseStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notDetected(1),
|
|
generating(2),
|
|
generatingAndDetected(3),
|
|
generatingAndImproperDetected(4),
|
|
detected(5),
|
|
improperDetected(6),
|
|
multipleSourcesDetected(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization external pulse detection status.
|
|
In GSS mode:
|
|
if generating then 1PSP is auto generated by the GSS Unit.
|
|
if generatingAndDetecting then 1PSP is generated by GPS satellites signal."
|
|
::= { winlink1000OduAirHss 4 }
|
|
|
|
winlink1000OduAirHssExtPulseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
typeA(2),
|
|
typeB(3),
|
|
typeC(4),
|
|
typeD(5),
|
|
typeE(6),
|
|
typeF(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization external pulse type."
|
|
::= { winlink1000OduAirHss 5 }
|
|
|
|
winlink1000OduAirHssDesiredExtPulseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
typeA(2),
|
|
typeB(3),
|
|
typeC(4),
|
|
typeD(5),
|
|
typeE(6),
|
|
typeF(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization required external pulse type. Valid values for read write:
|
|
{typeA(2),typeB(3),typeC(4),typeD(5),typeE(6),typeF(7)}. Valid value for read only:
|
|
{notApplicable(1)}."
|
|
::= { winlink1000OduAirHss 6 }
|
|
|
|
-- ###########################################################
|
|
-- HSS Radio Frame Pattern Table
|
|
-- ###########################################################
|
|
winlink1000OduAirHssRfpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirHssRfpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Radio Frame Patterns (RFP) Table."
|
|
::= { winlink1000OduAirHss 7 }
|
|
|
|
winlink1000OduAirHssRfpEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirHssRfpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU RFP Table entry."
|
|
INDEX { winlink1000OduAirHssRfpIndex }
|
|
::= { winlink1000OduAirHssRfpTable 1 }
|
|
|
|
Winlink1000OduAirHssRfpEntry ::= SEQUENCE {
|
|
winlink1000OduAirHssRfpIndex
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW5MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpTdmChannelBW5MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW10MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpTdmChannelBW10MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW20MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpTdmChannelBW20MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW40MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpTdmChannelBW40MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW80MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW7MHz
|
|
INTEGER,
|
|
winlink1000OduAirHssRfpEthChannelBW14MHz
|
|
INTEGER
|
|
}
|
|
|
|
winlink1000OduAirHssRfpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (2..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU RFP Table index. The index represent the Radio Frame Pattern:
|
|
typeA(2), typeB(3), typeC(4), typeD(5),typeE(6),typeF(7)."
|
|
::= { winlink1000OduAirHssRfpEntry 1 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW5MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 5MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 2 }
|
|
|
|
winlink1000OduAirHssRfpTdmChannelBW5MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of TDM service under Channel BW of 5MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 3 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW10MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 10MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 4 }
|
|
|
|
winlink1000OduAirHssRfpTdmChannelBW10MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of TDM service under Channel BW of 10MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 5 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW20MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 20MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 6 }
|
|
|
|
winlink1000OduAirHssRfpTdmChannelBW20MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of TDM service under Channel BW of 20MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 7 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW40MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 40MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 8 }
|
|
|
|
winlink1000OduAirHssRfpTdmChannelBW40MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of TDM service under Channel BW of 40MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 9 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW80MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 80MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 10 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW7MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 7MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 11 }
|
|
|
|
winlink1000OduAirHssRfpEthChannelBW14MHz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestFit(1),
|
|
nonOptimal(2),
|
|
notAvailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Represents the compatibility of Ethernet service under Channel BW of 14MHz
|
|
in the specific Radio Frame Pattern."
|
|
::= { winlink1000OduAirHssRfpEntry 12 }
|
|
|
|
winlink1000OduAirHssRfpStr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization supported patterns"
|
|
::= { winlink1000OduAirHss 8 }
|
|
|
|
winlink1000OduAirHssHsmID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique ID which is common to the HSM and all its collocated ODUs"
|
|
::= { winlink1000OduAirHss 9 }
|
|
|
|
winlink1000OduAirHssTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS time"
|
|
::= { winlink1000OduAirHss 10 }
|
|
|
|
winlink1000OduAirHssLatitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS Latitude"
|
|
::= { winlink1000OduAirHss 11 }
|
|
|
|
winlink1000OduAirHssNSIndicator OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS N/S Indicator"
|
|
::= { winlink1000OduAirHss 12 }
|
|
|
|
winlink1000OduAirHssLongitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS Longitude"
|
|
::= { winlink1000OduAirHss 13 }
|
|
|
|
winlink1000OduAirHssEWIndicator OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS E/W Indicator"
|
|
::= { winlink1000OduAirHss 14 }
|
|
|
|
winlink1000OduAirHssNumSatellites OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS Number of satellites"
|
|
::= { winlink1000OduAirHss 15 }
|
|
|
|
winlink1000OduAirHssAltitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS Altitude"
|
|
::= { winlink1000OduAirHss 16 }
|
|
|
|
winlink1000OduAirHssRfpPhase OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rfpNormalPhase(1),
|
|
rfpShiftedPhase(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hub Site Synchronization GPS RFP phase"
|
|
::= { winlink1000OduAirHss 17 }
|
|
|
|
winlink1000OduAirHssInterSiteSynchronizationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
independent(1),
|
|
synchronized(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Inter-Site Synchronization Mode - independent / synchronized"
|
|
::= { winlink1000OduAirHss 18 }
|
|
|
|
winlink1000OduAirHssInterSiteSynchronizationAvailability OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAvailable(1),
|
|
available(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Inter-Site Synchronization Availability"
|
|
::= { winlink1000OduAirHss 19 }
|
|
|
|
winlink1000OduAirHssSatellitesSatSyncRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notRequired(1),
|
|
required(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Satellites Synchronization Is Required"
|
|
::= { winlink1000OduAirHss 20 }
|
|
|
|
winlink1000OduAirHssDomainID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"EHSS domain. Indentify set of CUs with same HSS synchronization"
|
|
::= { winlink1000OduAirHss 21 }
|
|
|
|
winlink1000OduAirHssSupportedSynchronizationProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serialOnly(1),
|
|
ethOnly(2),
|
|
both(3),
|
|
ghssAndEth(4),
|
|
ghssEthSerial(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Supported Synchronization Protocols"
|
|
::= { winlink1000OduAirHss 22 }
|
|
|
|
winlink1000OduAirHssDesiredSynchronizationProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serialOnly(1),
|
|
ethOnly(2),
|
|
both(3),
|
|
ghssOnly(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Desired Synchronization Protocols"
|
|
::= { winlink1000OduAirHss 23 }
|
|
|
|
winlink1000OduAirHssDiscover OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
startAll(1),
|
|
startAllMstr(2),
|
|
startMyDmn(3),
|
|
startMyMstr(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate Discovery process of ODUs on the network."
|
|
::= { winlink1000OduAirHss 24 }
|
|
|
|
winlink1000OduAirHssNumberOfDiscoveredODUs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number OF Discovered ODUs in network."
|
|
::= { winlink1000OduAirHss 25 }
|
|
|
|
-- ###########################################################
|
|
-- HSS Discover Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirHssDiscoverTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirHssDiscoverEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HSS Discover Table."
|
|
::= { winlink1000OduAirHss 26 }
|
|
|
|
winlink1000OduAirHssDiscoverEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirHssDiscoverEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ODU Discover Table entry."
|
|
INDEX { winlink1000OduAirHssDiscoverIndex }
|
|
::= { winlink1000OduAirHssDiscoverTable 1 }
|
|
|
|
Winlink1000OduAirHssDiscoverEntry ::= SEQUENCE {
|
|
winlink1000OduAirHssDiscoverIndex
|
|
INTEGER,
|
|
winlink1000OduAirHssDiscoverODUDescription
|
|
DisplayString
|
|
}
|
|
|
|
winlink1000OduAirHssDiscoverIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HSS Discover Table Index."
|
|
::= { winlink1000OduAirHssDiscoverEntry 1 }
|
|
|
|
winlink1000OduAirHssDiscoverODUDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hold ODU HSS status in compress format:
|
|
Domain,IP,HSS Role,Hss support,
|
|
Enabled HSS protocol,Sync Status,
|
|
Location, IPv6."
|
|
::= { winlink1000OduAirHssDiscoverEntry 2 }
|
|
|
|
-- ###################### End of Discover Table ###################
|
|
|
|
winlink1000OduAirHssMasterSlaveCompatibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
compatible(1),
|
|
notCompatible(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"EHSM version compatibility. Relevant to Ethernet HSS Clients only."
|
|
::= { winlink1000OduAirHss 27 }
|
|
|
|
winlink1000OduAirHssNumberOfAssociatedCU OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of associated Ethernet HSS Clients. Relevant to Ethernet HSS Masters only"
|
|
::= { winlink1000OduAirHss 28 }
|
|
|
|
-- ###########################################################
|
|
-- HSS Associated CU Table
|
|
-- ###########################################################
|
|
|
|
winlink1000OduAirHssAssociatedCUTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Winlink1000OduAirHssAssociatedCUTableEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Associated Ethernet HSS Clients Table. Releant for Ethernet HSS Masters only."
|
|
::= { winlink1000OduAirHss 29 }
|
|
|
|
winlink1000OduAirHssAssociatedCUTableEntry OBJECT-TYPE
|
|
SYNTAX Winlink1000OduAirHssAssociatedCUTableEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Associated Ethernet HSS Clients Table Entry. Releant for Ethernet HSS Masters only."
|
|
INDEX { winlink1000OduAirHssAssociatedCUIndex }
|
|
::= { winlink1000OduAirHssAssociatedCUTable 1 }
|
|
|
|
Winlink1000OduAirHssAssociatedCUTableEntry ::= SEQUENCE {
|
|
winlink1000OduAirHssAssociatedCUIndex
|
|
INTEGER,
|
|
winlink1000OduAirHssAssociatedCUDescription
|
|
DisplayString
|
|
}
|
|
|
|
winlink1000OduAirHssAssociatedCUIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Associated Ethernet HSS Clients Table Index. Releant for Ethernet HSS Masters only."
|
|
::= { winlink1000OduAirHssAssociatedCUTableEntry 1 }
|
|
|
|
winlink1000OduAirHssAssociatedCUDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds Associated Ethernet HSS Clients Description in compress format:
|
|
IP,Delay,Compatibility,Ethernet Speed, Ethernet Rx rate, IPv6"
|
|
::= { winlink1000OduAirHssAssociatedCUTableEntry 2 }
|
|
|
|
-- ###################### End of Associated CU Table ###################
|
|
|
|
winlink1000OduAirHssSyncStatusEth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
notSynchronized(2),
|
|
goodSynchronizationLevel(3),
|
|
mediumSynchronizationLevel(4),
|
|
badSynchronizationLevel(5),
|
|
startSynchronization(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet HSS Client Synchronization Level"
|
|
::= { winlink1000OduAirHss 30 }
|
|
|
|
winlink1000OduAirHssEthVLANTag OBJECT-TYPE
|
|
SYNTAX INTEGER (1..40947)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet HSS VLan Tag:
|
|
The least significate decimal digit is the VLan Priority(0-6)
|
|
and the rest of the digits represents VLan ID (2-4094)"
|
|
::= { winlink1000OduAirHss 31 }
|
|
|
|
winlink1000OduAirHssHSMIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HSMs IP address. Relevant for HSC synchronized over Ethernet."
|
|
::= { winlink1000OduAirHss 32 }
|
|
|
|
winlink1000OduAirHssDelayToHSM OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delay in microseconds to HSM. Relevant for HSC synchronized over Ethernet."
|
|
::= { winlink1000OduAirHss 33 }
|
|
|
|
winlink1000OduAirHssSyncAcquisitionSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Accumulated quantity of seconds in clock acquisition while connected to current HSM"
|
|
::= { winlink1000OduAirHss 34 }
|
|
|
|
winlink1000OduAirHssHSMIPv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HSMs IPv6 address. Relevant for HSC synchronized over Ethernet."
|
|
::= { winlink1000OduAirHss 35 }
|
|
|
|
-- ###################### End of HSS Section ###################
|
|
|
|
winlink1000OduAirLockRemote OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unlock(1),
|
|
lock(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter enables locking the link with a specific ODU.
|
|
The following values can be set:
|
|
Unlock (default) - The ODU is not locked on a specific remote ODU. Unlock can only be performed when the link is not connected.
|
|
Lock - The ODU is locked on a specific remote ODU. Lock can only be performed when the link is active."
|
|
::= { winlink1000OduAir 41 }
|
|
|
|
winlink1000OduAirAntennaGain OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Antenna Gain in 0.1 dBi resolution. User defined value for
|
|
external antenna.
|
|
Legal range: MinAntennaGain - Alarm.
|
|
"
|
|
::= { winlink1000OduAir 42 }
|
|
|
|
externalAlarmInPort1Alarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent every time an alarm occurs in the External Alarm Input of port #1.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 1 - - Alarm.
|
|
"
|
|
::= 105
|
|
|
|
externalAlarmInPort2Alarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent every time an alarm occurs in the External Alarm Input of port #2.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 2 - - Alarm.
|
|
"
|
|
::= 106
|
|
|
|
bitFailedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { critical }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if there is no way to recover from the situation.
|
|
Contains two parameters:
|
|
1 - Description: ODU power up built in test failed. Error code is: %n
|
|
2 - %n number
|
|
"
|
|
::= 107
|
|
|
|
wrongConfigurationLoadedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if there is a way to recover from the situation.
|
|
Contains two parameters:
|
|
1 - Description: Wrong configuration loaded. Error code is: %n
|
|
2 - %n number
|
|
"
|
|
::= 108
|
|
|
|
lanPort1DisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port 1 status changed to disconnected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: LAN port 1 status changed to disconnected.
|
|
"
|
|
::= 109
|
|
|
|
lanPort2DisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port 2 status changed to disconnected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: LAN port 2 status changed to disconnected.
|
|
"
|
|
::= 110
|
|
|
|
mngPortDisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN1 port status changed to disconnected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: LAN1 port status changed to disconnected.
|
|
"
|
|
::= 111
|
|
|
|
externalAlarmInPort3Alarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent every time an alarm occurs in the External Alarm Input of port #3.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 3 - - Alarm.
|
|
"
|
|
::= 112
|
|
|
|
externalAlarmInPort4Alarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent every time an alarm occurs in the External Alarm Input of port #4.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 4 - - Alarm.
|
|
"
|
|
::= 113
|
|
|
|
swVersionsMismatchFullCompatibilityAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { warning }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions mismatch with full link functionality.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software versions mismatch - full link functionality
|
|
"
|
|
::= 114
|
|
|
|
swVersionsMismatchRestrictedCompatibilityAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { minor }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions mismatch with restricted link functionality.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software versions mismatch - restricted link functionality
|
|
"
|
|
::= 115
|
|
|
|
swVersionsMismatchSoftwareUpgradeRequired TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions mismatch and SW upgrade is required.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software versions mismatch - Software upgrade required
|
|
"
|
|
::= 116
|
|
|
|
swVersionsIncompatible TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { critical }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions are incompatible.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: SW Versions incompatible
|
|
"
|
|
::= 117
|
|
|
|
hssMultipleSourcesDetectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that multiple sync pulse sources were detected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS multiple sync sources were detected.
|
|
"
|
|
::= 118
|
|
|
|
hssSyncToProperSourceStoppedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that synchronization to a proper sync pulse source was stopped.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS sync pulse - Down. The reason is: %s.
|
|
%s - Is the reason for the sync down.
|
|
"
|
|
::= 119
|
|
|
|
hssSyncPulseDetectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that HSS additional sync pulse was detected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS additional sync pulse was detected.
|
|
"
|
|
::= 120
|
|
|
|
tdmBackupAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the TDM backup link was activated.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: TDM backup alarm - backup link was activated.
|
|
"
|
|
::= 121
|
|
|
|
linkLockUnauthorizedRemoteODU TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the remote ODU is unauthorized.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Unauthorized remote ODU connection rejected.
|
|
"
|
|
::= 122
|
|
|
|
linkLockUnauthorizedODU TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the ODU is unauthorized.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Unauthorized ODU connection rejected.
|
|
"
|
|
::= 123
|
|
|
|
hotStandbyAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the hot standby secondary link was activated.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Secondary Link Is Active.
|
|
"
|
|
::= 124
|
|
|
|
sfpInsertion TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that a device was inserted to SFP Port
|
|
"
|
|
::= 126
|
|
|
|
sfpPort1DisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the SFP port 1 status changed to disconnected.
|
|
Contains a single parameter which is its description:
|
|
1 - Description: SFP port 1 status changed to disconnected.
|
|
"
|
|
::= 127
|
|
|
|
ringRplStateActiveAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
RPL state changed to Active.
|
|
"
|
|
::= 128
|
|
|
|
|
|
desiredRatioCanNotBeAppliedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { minor }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates Desired UL/DL RAtio Can Not Be Applied.
|
|
"
|
|
::= 129
|
|
|
|
cbwMismatch TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that a Channel Bandwidth mismatch was detected.
|
|
Contains two parameters:
|
|
1 - Description: Channel Bandwidth Mismatch: one side is %n0 MHz and the other is %n1 MHz.
|
|
%n0 is the local Channel Bandwidth value in MHz.
|
|
%n1 is the remoet Channel Bandwidth value in MHz."
|
|
::= 130
|
|
|
|
gpsNotSynchronized TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the GPS is not synchronized with satellites.
|
|
Pulses are self generated.
|
|
"
|
|
::= 131
|
|
|
|
pdTooHighDueCbwLimitations TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that link cannot be established because
|
|
link range is too large for channel bandwidth.
|
|
"
|
|
::= 132
|
|
|
|
hbsEncryptionAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates an encryption key mismatch.
|
|
Contains a single parameter, which is its description, including the HSU's name
|
|
"
|
|
::= 133
|
|
|
|
hbsEhServiceClosedToHsu TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates an encryption key mismatch.
|
|
Contains a single parameter, which is its description, including the HSU's name
|
|
"
|
|
::= 134
|
|
|
|
hbsUnsynchronizedHsuAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { critical }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates a registered HSU lost synchronization.
|
|
"
|
|
::= 135
|
|
|
|
hbsInactiveHbsAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates HBS is InActive.
|
|
"
|
|
::= 136
|
|
|
|
incompatibleHsu TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { critical }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the HSU is not compatible to HBS.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Incompatible ODUs.
|
|
"
|
|
::= 137
|
|
|
|
hsuUnsupportedBeacon TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { warning }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates an unsupported beacon has arrived at HSU
|
|
"
|
|
::= 138
|
|
|
|
lanPortDisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port status changed to disconnected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: LAN port status changed to disconnected.
|
|
"
|
|
::= 139
|
|
|
|
poePortDisconnectedAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN2 port status changed to disconnected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: LAN2 port status changed to disconnected.
|
|
"
|
|
::= 140
|
|
|
|
poePowerConsumptionAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the POE Power Consumption is above allowed maximum.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: POE consumption above allowed maximum. port closed.
|
|
"
|
|
::= 141
|
|
|
|
hobupFaultyStateAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Alarm will indicate that the Hot Backup module is in faulty state.
|
|
1 - Description: Hot Backup fault detected: %s unit.
|
|
%s - Primary Or Secondary Unit
|
|
"
|
|
::= 149
|
|
|
|
gpsOverCurrentAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the GPS Antenna current consumption is above allowed maximum.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed.
|
|
"
|
|
::= 150
|
|
|
|
gpsCommunicationFailiureAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the GPS data isn't received.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: GPS Communication failiure.
|
|
"
|
|
::= 151
|
|
|
|
temperatureThresholdAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the board temperature is above allowed maximum.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed.
|
|
"
|
|
::= 152
|
|
|
|
localRouterDiscoveryStatus TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Alarm will indicate that we have no connection with local train router.
|
|
1 - Description: MacLearningUpdate detected disconnection with local train router %s
|
|
%s - local train IP
|
|
"
|
|
::= 153
|
|
|
|
trackRouterDiscoveryStatus TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Alarm will indicate that we have no connection with Track side router.
|
|
1 - Description: MacLearningUpdate detected disconnection with Track side router %s
|
|
%s - Default gateway IP
|
|
"
|
|
::= 154
|
|
|
|
lastUserSnmpAccessOverHourAgo TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This trap will indicate that the last access of the accessing user was more than an hour ago.
|
|
1 - Description: User %s performed SNMP access after more than an hour.
|
|
%s - user name
|
|
"
|
|
::= 155
|
|
|
|
btsTargetUnreachable TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Alarm will indicate that we have no connection with Bts desired target.
|
|
1 - Description: TNC detected disconnection with the BTS target %s
|
|
%s - Default gateway IP
|
|
"
|
|
::= 156
|
|
|
|
tdmServiceClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 100 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that TDM Service fault is cleared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: TDM Service - Normal.
|
|
"
|
|
::= 200
|
|
|
|
ethServiceOpened TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 101 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that Ethernet Service has been opened.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Ethernet Service has been opened.
|
|
"
|
|
::= 201
|
|
|
|
encryptionClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 103 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that encryption is OK.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Encryption Status - Normal.
|
|
"
|
|
::= 203
|
|
|
|
changeLinkPasswordClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 104 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the Link Password was changed successfully.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Link Password has been changed at/on: %s.
|
|
%s - Is the Local Site name or Remote Site name or both sides of the Link.
|
|
"
|
|
::= 204
|
|
|
|
externalAlarmInPort1Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 105 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Trap is sent every time an External Alarm Input fault of port # 1 is cleared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 1 - - Alarm Cleared.
|
|
"
|
|
::= 205
|
|
|
|
externalAlarmInPort2Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 106 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Trap is sent every time an External Alarm Input fault of port # 2 is cleared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 2 - - Alarm Cleared.
|
|
"
|
|
::= 206
|
|
|
|
lanPort1Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 109 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port 1 status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: LAN port 1 status changed to connected - %s
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 209
|
|
|
|
lanPort2Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 110 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port 2 status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: LAN port 2 status changed to connected - %s.
|
|
2 - %s Is the Eth. mode (speed & duplex).
|
|
"
|
|
::= 210
|
|
|
|
mngPortClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 111 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN1 port status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: LAN1 port status changed to connected - %s
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 211
|
|
|
|
externalAlarmInPort3Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 112 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Trap is sent every time an External Alarm Input fault of port # 3 is cleared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 3 - - Alarm Cleared.
|
|
"
|
|
::= 212
|
|
|
|
externalAlarmInPort4Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 113 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This Trap is sent every time an External Alarm Input fault of port # 4 is cleared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: External Alarm 4 - - Alarm Cleared.
|
|
"
|
|
::= 213
|
|
|
|
swVersionsMatchFullCompatibilityClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 114 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions match.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software Versions compatible
|
|
"
|
|
::= 214
|
|
|
|
swVersionsMatchRestrictedCompatibilityClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 115 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions match and link functionality is not restricted.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software Versions compatible
|
|
"
|
|
::= 215
|
|
|
|
swVersionsMatchSoftwareUpgradeRequiredClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 116 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions match and SW upgrade is successful.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software Versions compatible
|
|
"
|
|
::= 216
|
|
|
|
swVersionsCompatibleClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 117 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
The trap is sent if SW versions compatible
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Software Versions compatible
|
|
"
|
|
::= 217
|
|
|
|
hssMultipleSourcesDisappearedClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 118 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that multiple sync pulse sources disappeared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS multiple sync pulse sources disappeared.
|
|
"
|
|
::= 218
|
|
|
|
hssSyncToProperSourceAchievedClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 119 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that synchronization to a proper Sync source was achieved.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS sync pulse - Up.
|
|
"
|
|
::= 219
|
|
|
|
hssSyncPulseDisappearedClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 120 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that HSS additional sync pulse disappeared.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: HSS additional sync pulse was disappeared.
|
|
"
|
|
::= 220
|
|
|
|
tdmBackupClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 121 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the TDM main link was activated.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: TDM main link was activated.
|
|
"
|
|
::= 221
|
|
|
|
linkLockAuthorizedRemoteODU TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 122 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the remote ODU is authorized.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Authorized remote ODU connection accepted.
|
|
"
|
|
::= 222
|
|
|
|
linkLockAuthorizedODU TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 123 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the ODU is authorized.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Authorized ODU connection permitted.
|
|
"
|
|
::= 223
|
|
|
|
linkAuthenticationDisabled TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 122 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the Link Lock is disabled.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Link Authentication has been disabled.
|
|
"
|
|
::= 224
|
|
|
|
hotStandbyClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 124 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the Primary Link Was Activated.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Primary Link Is Active.
|
|
"
|
|
::= 225
|
|
|
|
sfpExtraction TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that a device was extracted from SFP Port
|
|
"
|
|
::= 226
|
|
|
|
sfpPort1Clear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 127 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the SFP port 1 status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: SFP port 1 status changed to connected - %s
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 227
|
|
|
|
compatibleIdus TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 10 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the ODU has identified compatible Idus on both sides of the link.
|
|
"
|
|
::= 228
|
|
|
|
desiredRatioCanNotBeAppliedClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 129 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates Current UL/DL Ratio Is Equal To Desired Ratio.
|
|
"
|
|
::= 229
|
|
|
|
cbwMatch TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 130 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that a Channel Bandwidth match was detected.
|
|
Contains a single parameter, which is its description:
|
|
1 - Channel Bandwidth value in MHz.
|
|
"
|
|
::= 230
|
|
|
|
switchCbwAndChannel TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the system is switching Channel Bandwidth and channel frequency.
|
|
Contains two parameters:
|
|
1 - Switching to Channel Bandwith %n0 MHz and to channel %n1 GHz.
|
|
"
|
|
::= 231
|
|
|
|
ringRplStateIdle TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 128 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
RPL state changed to Idle.
|
|
"
|
|
::= 232
|
|
|
|
ringEthServiceStatus TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates Ethernet service's state - blocked \ unblocked.
|
|
Contains a single parameter:
|
|
1 - Description: Ethernet's state (blocked \ unblocked)
|
|
"
|
|
::= 233
|
|
|
|
ringFirstRpmReceived TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Ring application: in non-RPL link indicates first from a specific RPL was received.
|
|
Contains a single parameter:
|
|
1 - Description: RPM's VLAN ID
|
|
"
|
|
::= 234
|
|
|
|
ringEthernetSrviceUnblockedTO TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Ring application: in non-RPL link Ethernet service is unblocked due to RPM timeout.
|
|
"
|
|
::= 235
|
|
|
|
gpsSynchronized TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 131 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that the GPS is synchronized with satellites.
|
|
"
|
|
::= 236
|
|
|
|
hbsEncryptionClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 133 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that encryption is OK.
|
|
Contains a single parameter, which is its description, including the HSU's name
|
|
"
|
|
::= 237
|
|
|
|
hbsEhServiceOpenedToHsu TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 134 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates that encryption is OK.
|
|
Contains a single parameter, which is its description, including the HSU's name
|
|
"
|
|
::= 238
|
|
|
|
hbsSynchronizedHsuAlarm TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 135 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates a registered HSU is synchronized.
|
|
"
|
|
::= 239
|
|
|
|
hbsActiveHbs TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 136 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates when HBS has been activated.
|
|
"
|
|
::= 240
|
|
|
|
switchCBW TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Switching Channel Bandwidth.
|
|
"
|
|
::= 241
|
|
|
|
changeRatio TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
HBS Tx ratio has changed.
|
|
"
|
|
::= 242
|
|
|
|
lanPortClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 139 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN port status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: LAN port status changed to connected - %s
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 243
|
|
|
|
poePortClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 140 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the LAN2 port status changed to connected.
|
|
Contains two parameters:
|
|
1 - Description: LAN2 port status changed to connected - %s
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 244
|
|
|
|
poePowerConsumptionClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 141 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the POE power consumption is valid.
|
|
Contains two parameters:
|
|
1 - Description: POE consumption within limits. port is opened.
|
|
2 - %s Is the Eth. mode (speed & duplex)
|
|
"
|
|
::= 245
|
|
|
|
incompatibleHbsHsu TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Incompatible HBS/HSU software versions - no service.
|
|
"
|
|
::= 246
|
|
|
|
mobilityLinkOff TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Mobility - Link cannot be established due to:
|
|
1 - The HBS does not support Mobility
|
|
2 - Lack of resources in the HBS for HSU level
|
|
"
|
|
::= 247
|
|
|
|
enterLocalConnection TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Entering Local Connection (Broadcast) Mode.
|
|
"
|
|
::= 248
|
|
|
|
hobupActiveStateFaultyClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 149 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
this clear alarm will indicate that the Hot Backup unit is in active state.
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Hot Backup %s unit activated.
|
|
%s - Primary Or Secondary Unit
|
|
"
|
|
::= 249
|
|
|
|
hobupStandbyState TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
This info fault will indicate that the Hot backup module has entered standby/peer_detection state
|
|
Contains a single parameter, which is its description:
|
|
1 - Description: Hot Backup in Standby state: %s unit.
|
|
%s - Primary Or Secondary Unit
|
|
"
|
|
::= 250
|
|
|
|
gpsOverCurrentClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 150 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the GPS Antenna current consumption is valid.
|
|
"
|
|
::= 251
|
|
|
|
temperatureThresholdClear TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 152 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicates the board temperature is valid.
|
|
"
|
|
::= 252
|
|
|
|
localRouterDiscoverySucceed TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 153 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicated the we succeeded to discover train router in ip %s MAC address %s
|
|
%s Train IP
|
|
%s Train MAC Address
|
|
"
|
|
::= 253
|
|
|
|
trackRouterDiscoverySucceed TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 154 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicated the we succeeded to discover track router in ip %s MAC address %s
|
|
%s Train IP
|
|
%s Train MAC Address
|
|
"
|
|
::= 254
|
|
|
|
qosVersion2StrictMismatch TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
CPE doesn't support strict QOS configuration.
|
|
"
|
|
::= 255
|
|
|
|
qosVersion2TtlMismatch TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
CPE doesn't support TTL configuration.
|
|
"
|
|
::= 256
|
|
|
|
btsTargetIsReachable TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 156 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicated the we succeeded to establish connection with the Bts desired target (%s)
|
|
%s Target IP
|
|
"
|
|
::= 257
|
|
|
|
tcNotSupportedByHSU TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
CPE doesn't support TC functionality.
|
|
"
|
|
::= 258
|
|
|
|
syncEPortHOStateChange TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Enter/leave HO state of SyncE port.
|
|
"
|
|
::= 259
|
|
|
|
syncEPortFailureStateChange TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Enter/leave Failure state of SyncE port.
|
|
"
|
|
::= 260
|
|
|
|
btsCpeUpdateServiceFailed TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Update service Failed
|
|
"
|
|
::= 261
|
|
|
|
btsCpeUpdateServiceSucceed TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Update service Succeed
|
|
"
|
|
::= 262
|
|
radiusServerNoREsponse TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
No response from radius server
|
|
"
|
|
::= 263
|
|
noRadiusServerRespond TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { major }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Alarm indicates that no Radius server is connected
|
|
"
|
|
::= 264
|
|
radiusServerRespondedSuccessfully TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&CLEARS { 264 }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
indicates that Radius server responded seccessfully.
|
|
"
|
|
::= 265
|
|
|
|
bsaAlignmentStarted TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicate the beginning of Alignment Process
|
|
"
|
|
::= 266
|
|
|
|
bsaAlignmentFinished TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicate the completion of Alignment Process
|
|
"
|
|
::= 267
|
|
|
|
bsaAlignmentTriggered TRAP-TYPE
|
|
ENTERPRISE winlink1000
|
|
VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex,
|
|
winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId }
|
|
--&ACTIONS { normal }
|
|
--&MESG "$'1"
|
|
DESCRIPTION
|
|
"
|
|
Indicate the triggering of Alignment Process due to exceeding thresholds
|
|
"
|
|
::= 268
|
|
|
|
-- ###########################################################
|
|
-- Products Section
|
|
-- ###########################################################
|
|
|
|
|
|
radwinProducts OBJECT IDENTIFIER ::= { radwin 20 }
|
|
winlink1000Family OBJECT IDENTIFIER ::= { radwinProducts 2 }
|
|
radwin2000Family OBJECT IDENTIFIER ::= { radwinProducts 3 }
|
|
gpsSynchronizerFamily OBJECT IDENTIFIER ::= { radwinProducts 4 }
|
|
radwin5000HBSFamily OBJECT IDENTIFIER ::= { radwinProducts 5 }
|
|
radwin5000HSUFamily OBJECT IDENTIFIER ::= { radwinProducts 6 }
|
|
radwin6000Family OBJECT IDENTIFIER ::= { radwinProducts 10 }
|
|
radwinWiFiAPFamily OBJECT IDENTIFIER ::= { radwinProducts 20 }
|
|
|
|
|
|
--
|
|
-- the following identifiers are assigned to ODU Products
|
|
--
|
|
|
|
odu OBJECT IDENTIFIER ::= { winlink1000Family 1 }
|
|
|
|
oduIntegratedAntenna OBJECT IDENTIFIER ::= { odu 1 }
|
|
oduExternalAntenna OBJECT IDENTIFIER ::= { odu 2 }
|
|
|
|
--
|
|
-- Suffix 3,4,5,6,7,8,9,10,11,12,13,14,15,16 in the products section
|
|
-- are reserved for backward compatibility.
|
|
--
|
|
|
|
odu2000 OBJECT IDENTIFIER ::= { radwin2000Family 1 }
|
|
|
|
odu2KIntegratedAntenna OBJECT IDENTIFIER ::= { odu2000 1 }
|
|
odu2KExternalAntenna OBJECT IDENTIFIER ::= { odu2000 2 }
|
|
|
|
oduGSU OBJECT IDENTIFIER ::= { gpsSynchronizerFamily 1 }
|
|
|
|
oduGSUExternalAntenna OBJECT IDENTIFIER ::= { oduGSU 2 }
|
|
|
|
hssSyncUnits OBJECT IDENTIFIER ::= { gpsSynchronizerFamily 2 }
|
|
|
|
hssISU OBJECT IDENTIFIER ::= { hssSyncUnits 1 }
|
|
hssGSU OBJECT IDENTIFIER ::= { hssSyncUnits 2 }
|
|
|
|
oduHBS OBJECT IDENTIFIER ::= { radwin5000HBSFamily 1 }
|
|
|
|
oduHBSIntegratedAntenna OBJECT IDENTIFIER ::= { oduHBS 1 }
|
|
oduHBSExternalAntenna OBJECT IDENTIFIER ::= { oduHBS 2 }
|
|
|
|
oduHSU OBJECT IDENTIFIER ::= { radwin5000HSUFamily 1 }
|
|
|
|
oduHSUIntegratedAntenna OBJECT IDENTIFIER ::= { oduHSU 1 }
|
|
oduHSUExternalAntenna OBJECT IDENTIFIER ::= { oduHSU 2 }
|
|
|
|
odu6000 OBJECT IDENTIFIER ::= { radwin6000Family 1 }
|
|
|
|
odu6K OBJECT IDENTIFIER ::= { odu6000 1 }
|
|
|
|
gateway6000 OBJECT IDENTIFIER ::= { radwin6000Family 2 }
|
|
|
|
gateway6K OBJECT IDENTIFIER ::= { gateway6000 1 }
|
|
|
|
odu600 OBJECT IDENTIFIER ::= { radwinWiFiAPFamily 1 }
|
|
|
|
oduWiFiAP OBJECT IDENTIFIER ::= { odu600 1 }
|
|
|
|
END
|
|
|