1338 lines
44 KiB
Plaintext
1338 lines
44 KiB
Plaintext
-- *********************************************************************
|
|
-- **
|
|
-- ** BATM Advanced Communications.
|
|
-- **
|
|
-- *********************************************************************
|
|
-- ** Filename: PRVT-OSPF-MIB.mib
|
|
-- ** Project: T-Metro Switches.
|
|
-- ** Purpose: Private MIB
|
|
-- *********************************************************************
|
|
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
|
|
-- WARNING:
|
|
--
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
|
--
|
|
-- This file is the property of BATM Advanced Communications and contains
|
|
-- proprietary and confidential information. This file is made
|
|
-- available to authorized BATM customers on the express
|
|
-- condition that neither it, nor any of the information contained
|
|
-- therein, shall be disclosed to third parties or be used for any
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
|
-- software components of BATM manufactured equipment within the
|
|
-- authorized customer's network, and that such transfer be
|
|
-- completed in accordance with the instructions provided by
|
|
-- BATM. Any other use is strictly prohibited.
|
|
--
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
|
--
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
|
--
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
PRVT-OSPF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
routingProtocols
|
|
FROM PRVT-SWITCH-MIB
|
|
Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY,
|
|
OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC;
|
|
|
|
prvtOspfMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201204010000Z"
|
|
ORGANIZATION
|
|
"BATM Advanced Communication"
|
|
CONTACT-INFO
|
|
"BATM/Telco Systems Support team
|
|
Email:
|
|
For North America: techsupport@telco.com
|
|
For North Europe: support@batm.de, info@batm.de
|
|
For the rest of the world: techsupport@telco.com"
|
|
DESCRIPTION
|
|
"The PRVT OSPF MIB module contains additional information, needed to
|
|
control the OSPF protocol, that is not found in the standard RFC"
|
|
REVISION "201204010000Z"
|
|
DESCRIPTION
|
|
"Area ID is represent as octet string"
|
|
REVISION "201106020000Z"
|
|
DESCRIPTION
|
|
"Added prvtOspfTrafficEngEnable"
|
|
REVISION "200911130000Z"
|
|
DESCRIPTION
|
|
"Initial version"
|
|
::= { routingProtocols 2 }
|
|
|
|
|
|
PrvtOspfDesignatedRouterPriority ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values defined for the priority of a system for
|
|
becoming the designated router."
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
PrvtOspfIpAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d.1d.1d.1d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address.
|
|
Currently only IPv4 network addresses are supported.
|
|
Format for IPv4 addresses consist of 4 octets in network-byte order."
|
|
SYNTAX OCTET STRING (SIZE(4 | 16))
|
|
|
|
prvtOspfObjects OBJECT IDENTIFIER
|
|
::= { prvtOspfMIB 1 }
|
|
|
|
prvtOspfRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
router in the Autonomous System.
|
|
By convention, to ensure uniqueness, this
|
|
should default to the value of one of the
|
|
router's IP interface addresses."
|
|
REFERENCE
|
|
"OSPF Version 2, C.1 Global parameters"
|
|
::= { prvtOspfObjects 1 }
|
|
|
|
prvtOspfAdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPF in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPF Process is active on at least one interface;
|
|
'disabled' disables it on all interfaces."
|
|
::= { prvtOspfObjects 2 }
|
|
|
|
prvtOspfVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version2(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current version number of the OSPF
|
|
protocol is 2."
|
|
REFERENCE
|
|
"OSPF Version 2, Title"
|
|
::= { prvtOspfObjects 3 }
|
|
|
|
prvtOspfExternLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external (LS type 5) link-state
|
|
advertisements in the link-state database."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.5 AS external link
|
|
advertisements"
|
|
::= { prvtOspfObjects 4 }
|
|
|
|
prvtOspfExternLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of
|
|
the external link-state advertisements contained
|
|
in the link-state database. This sum
|
|
can be used to determine if there has been a
|
|
change in a router's link state database, and
|
|
to compare the link-state database of two
|
|
routers."
|
|
::= { prvtOspfObjects 5 }
|
|
|
|
prvtOspfTOSSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for type-of-service routing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix F.1.2 Optional TOS
|
|
support"
|
|
::= { prvtOspfObjects 6 }
|
|
|
|
prvtOspfOriginateNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of new link-state advertisements
|
|
that have been originated. This number is
|
|
incremented each time the router originates a
|
|
new LSA."
|
|
::= { prvtOspfObjects 7 }
|
|
|
|
prvtOspfRxNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of link-state advertisements re-
|
|
ceived determined to be new instantiations.
|
|
This number does not include newer instantia-
|
|
tions of self-originated link-state advertise-
|
|
ments."
|
|
::= { prvtOspfObjects 8 }
|
|
|
|
prvtOspfExtLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of non-default AS-
|
|
external-LSAs entries that can be stored in the
|
|
link-state database. If the value is -1, then
|
|
there is no limit.
|
|
When the number of non-default AS-external-LSAs
|
|
in a router's link-state database reaches
|
|
ospfExtLsdbLimit, the router enters Overflow-
|
|
State. The router never holds more than
|
|
ospfExtLsdbLimit non-default AS-external-LSAs
|
|
in its database. OspfExtLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPF
|
|
backbone and/or any regular OSPF area. (i.e.,
|
|
OSPF stub areas and NSSAs are excluded)."
|
|
::= { prvtOspfObjects 9 }
|
|
|
|
prvtOspfMulticastExtensions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask indicating whether the router is
|
|
forwarding IP multicast (Class D) datagrams
|
|
based on the algorithms defined in the Multi-
|
|
cast Extensions to OSPF.
|
|
Bit 0, if set, indicates that the router can
|
|
forward IP multicast datagrams in the router's
|
|
directly attached areas (called intra-area mul-
|
|
ticast routing).
|
|
Bit 1, if set, indicates that the router can
|
|
forward IP multicast datagrams between OSPF
|
|
areas (called inter-area multicast routing).
|
|
Bit 2, if set, indicates that the router can
|
|
forward IP multicast datagrams between Auto-
|
|
nomous Systems (called inter-AS multicast rout-
|
|
ing).
|
|
Only certain combinations of bit settings are
|
|
allowed, namely: 0 (no multicast forwarding is
|
|
enabled), 1 (intra-area multicasting only), 3
|
|
(intra-area and inter-area multicasting), 5
|
|
(intra-area and inter-AS multicasting) and 7
|
|
(multicasting everywhere). By default, no mul-
|
|
ticast forwarding is enabled."
|
|
::= { prvtOspfObjects 10 }
|
|
|
|
prvtOspfExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-external-LSAs. When
|
|
set to 0, the router will not leave Overflow-
|
|
State until restarted."
|
|
::= { prvtOspfObjects 11 }
|
|
|
|
prvtOspfDemandExtensions OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for demand routing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix on Demand Routing"
|
|
::= { prvtOspfObjects 12 }
|
|
|
|
prvtOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters
|
|
and cumulative statistics of the router's
|
|
attached areas."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data
|
|
Structure"
|
|
::= { prvtOspfObjects 13 }
|
|
|
|
prvtOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured
|
|
parameters and cumulative statistics
|
|
of one of the router's attached areas."
|
|
INDEX { prvtOspfAreaId }
|
|
::= { prvtOspfAreaTable 1 }
|
|
|
|
PrvtOspfAreaEntry ::= SEQUENCE {
|
|
prvtOspfAreaId OCTET STRING,
|
|
prvtOspfAreaRowStatus RowStatus,
|
|
prvtOspfAreaType INTEGER,
|
|
prvtOspfAreaSummary INTEGER,
|
|
prvtOspfAreaAuthType INTEGER,
|
|
prvtOspfAreaShortcutConfiguration TruthValue,
|
|
prvtOspfAreaNssaTransitRole INTEGER,
|
|
prvtOspfAreaImportList OCTET STRING,
|
|
prvtOspfAreaExportList OCTET STRING,
|
|
prvtOspfAreaMetric Integer32,
|
|
prvtOspfAreaMetricType INTEGER,
|
|
prvtOspfAreaDefaultCost Integer32
|
|
}
|
|
|
|
prvtOspfAreaId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet string, uniquely identifying area.
|
|
Both A.B.C.D or integer notations are supported.
|
|
Area ID 0.0.0.0 is used for the OSPF backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { prvtOspfAreaEntry 1 }
|
|
|
|
prvtOspfAreaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { prvtOspfAreaEntry 2 }
|
|
|
|
prvtOspfAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER { default(0), stub(1), nssa(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area type"
|
|
::= { prvtOspfAreaEntry 3 }
|
|
|
|
prvtOspfAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER { noAreaSummary(1), sendAreaSummary(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable ospfAreaSummary controls the im-
|
|
port of summary LSAs into stub areas. It has
|
|
no effect on other areas.
|
|
If it is noAreaSummary, the router will neither
|
|
originate nor propagate summary LSAs into the
|
|
stub area. It will rely entirely on its de-
|
|
fault route.
|
|
If it is sendAreaSummary, the router will both
|
|
summarize and propagate summary LSAs."
|
|
::= { prvtOspfAreaEntry 4 }
|
|
|
|
prvtOspfAreaAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER { simple(1), md5(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an area.
|
|
Additional authentication types may be assigned
|
|
locally on a per Area basis."
|
|
::= { prvtOspfAreaEntry 5 }
|
|
|
|
prvtOspfAreaShortcutConfiguration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the user to set whether the area
|
|
allows the traffict to pass through other
|
|
not backbone area"
|
|
::= { prvtOspfAreaEntry 6 }
|
|
|
|
prvtOspfAreaNssaTransitRole OBJECT-TYPE
|
|
SYNTAX INTEGER { ospfNssaRoleNever(0), ospfNssaRoleAlways(1),
|
|
ospfNssaRoleCandidate(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit role"
|
|
::= { prvtOspfAreaEntry 7 }
|
|
|
|
prvtOspfAreaImportList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Import List"
|
|
::= { prvtOspfAreaEntry 8 }
|
|
|
|
prvtOspfAreaExportList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Export List"
|
|
::= { prvtOspfAreaEntry 9 }
|
|
|
|
prvtOspfAreaMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area metric"
|
|
::= { prvtOspfAreaEntry 10 }
|
|
|
|
prvtOspfAreaMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER { ospfMetric(1), comparableCost(2),
|
|
nonComparable(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area metric type"
|
|
::= { prvtOspfAreaEntry 11 }
|
|
|
|
prvtOspfAreaDefaultCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default cost"
|
|
::= { prvtOspfAreaEntry 12 }
|
|
|
|
prvtOspfLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Link State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { prvtOspfObjects 14 }
|
|
|
|
prvtOspfLsdbEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { prvtOspfLsdbAreaId, prvtOspfLsdbType, prvtOspfLsdbLsid,
|
|
prvtOspfLsdbRouterId }
|
|
::= { prvtOspfLsdbTable 1 }
|
|
|
|
PrvtOspfLsdbEntry ::= SEQUENCE {
|
|
prvtOspfLsdbAreaId IpAddress,
|
|
prvtOspfLsdbType INTEGER,
|
|
prvtOspfLsdbLsid IpAddress,
|
|
prvtOspfLsdbRouterId IpAddress,
|
|
prvtOspfLsdbSequence Integer32,
|
|
prvtOspfLsdbAge Integer32,
|
|
prvtOspfLsdbChecksum Integer32,
|
|
prvtOspfLsdbLength Integer32,
|
|
prvtOspfLsdbAdvertisement OCTET STRING
|
|
}
|
|
|
|
prvtOspfLsdbAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { prvtOspfLsdbEntry 1 }
|
|
|
|
prvtOspfLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER { routerLink(1), networkLink(2), summaryLink(3),
|
|
asSummaryLink(4), asExternalLink(5),
|
|
multicastLink(6), nssaExternalLink(7),
|
|
unknownLink(8), opaqueLinkLsa(9), opaqueAreaLsa(10),
|
|
opaqueAsLsa(11) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate
|
|
advertisement format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { prvtOspfLsdbEntry 2 }
|
|
|
|
prvtOspfLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { prvtOspfLsdbEntry 3 }
|
|
|
|
prvtOspfLsdbRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { prvtOspfLsdbEntry 4 }
|
|
|
|
prvtOspfLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { prvtOspfLsdbEntry 5 }
|
|
|
|
prvtOspfLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 (-32768..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { prvtOspfLsdbEntry 6 }
|
|
|
|
prvtOspfLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly
|
|
referred to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { prvtOspfLsdbEntry 7 }
|
|
|
|
prvtOspfLsdbLength OBJECT-TYPE
|
|
SYNTAX Integer32 (-32768..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the ospf packet"
|
|
::= { prvtOspfLsdbEntry 8 }
|
|
|
|
prvtOspfLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement,
|
|
including its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State
|
|
Advertisements"
|
|
::= { prvtOspfLsdbEntry 9 }
|
|
|
|
prvtOspfExtLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Links State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { prvtOspfObjects 15 }
|
|
|
|
prvtOspfExtLsdbEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { prvtOspfExtLsdbType, prvtOspfExtLsdbLsid,
|
|
prvtOspfExtLsdbRouterId }
|
|
::= { prvtOspfExtLsdbTable 1 }
|
|
|
|
PrvtOspfExtLsdbEntry ::= SEQUENCE {
|
|
prvtOspfExtLsdbType INTEGER,
|
|
prvtOspfExtLsdbLsid IpAddress,
|
|
prvtOspfExtLsdbRouterId IpAddress,
|
|
prvtOspfExtLsdbSequence Integer32,
|
|
prvtOspfExtLsdbAge Integer32,
|
|
prvtOspfExtLsdbChecksum Integer32,
|
|
prvtOspfExtLsdbAdvertisement OCTET STRING
|
|
}
|
|
|
|
prvtOspfExtLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER { routerLink(1), networkLink(2), summaryLink(3),
|
|
asSummaryLink(4), asExternalLink(5),
|
|
multicastLink(6), nssaExternalLink(7),
|
|
unknownLink(8), opaqueLinkLsa(9), opaqueAreaLsa(10),
|
|
opaqueAsLsa(11) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { prvtOspfExtLsdbEntry 1 }
|
|
|
|
prvtOspfExtLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { prvtOspfExtLsdbEntry 2 }
|
|
|
|
prvtOspfExtLsdbRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { prvtOspfExtLsdbEntry 3 }
|
|
|
|
prvtOspfExtLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { prvtOspfExtLsdbEntry 4 }
|
|
|
|
prvtOspfExtLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 (-32768..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { prvtOspfExtLsdbEntry 5 }
|
|
|
|
prvtOspfExtLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { prvtOspfExtLsdbEntry 6 }
|
|
|
|
prvtOspfExtLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { prvtOspfExtLsdbEntry 7 }
|
|
|
|
prvtOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the inter-
|
|
faces from the viewpoint of OSPF."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { prvtOspfObjects 16 }
|
|
|
|
prvtOspfIfEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one inter-
|
|
face from the viewpoint of OSPF."
|
|
INDEX { prvtOspfIfIpAddress }
|
|
::= { prvtOspfIfTable 1 }
|
|
|
|
PrvtOspfIfEntry ::= SEQUENCE {
|
|
prvtOspfIfIpAddress IpAddress,
|
|
prvtOspfIfRowStatus RowStatus,
|
|
prvtOspfIfAreaId OCTET STRING,
|
|
prvtOspfIfWorkingMode INTEGER,
|
|
prvtOspfIfTransitDelay Integer32,
|
|
prvtOspfIfPriority Integer32,
|
|
prvtOspfIfHelloTimer Integer32,
|
|
prvtOspfIfDeadTimer Integer32,
|
|
prvtOspfIfRetransmitInterval Integer32,
|
|
prvtOspfIfOutputCost Integer32,
|
|
prvtOspfIfAuthType INTEGER,
|
|
prvtOspfIfAuthSimple OCTET STRING,
|
|
prvtOspfIfType INTEGER
|
|
}
|
|
|
|
prvtOspfIfIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface."
|
|
::= { prvtOspfIfEntry 1 }
|
|
|
|
prvtOspfIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the entry.
|
|
Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { prvtOspfIfEntry 2 }
|
|
|
|
prvtOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet string, uniquely identifying area.
|
|
Both A.B.C.D or integer notations are supported. Area ID
|
|
0.0.0.0 is used for the OSPF backbone."
|
|
::= { prvtOspfIfEntry 3 }
|
|
|
|
prvtOspfIfWorkingMode OBJECT-TYPE
|
|
SYNTAX INTEGER { active(0), passive(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Working mode"
|
|
::= { prvtOspfIfEntry 4 }
|
|
|
|
prvtOspfIfTransitDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link state update packet over this
|
|
interface."
|
|
::= { prvtOspfIfEntry 5 }
|
|
|
|
prvtOspfIfPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in
|
|
multi-access networks, this field is used in
|
|
the designated router election algorithm. The
|
|
value 0 signifies that the router is not eligible
|
|
to become the designated router on this
|
|
particular network. In the event of a tie in
|
|
this value, routers will use their Router ID as
|
|
a tie breaker."
|
|
::= { prvtOspfIfEntry 6 }
|
|
|
|
prvtOspfIfHelloTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the
|
|
interface. This value must be the same for all
|
|
routers attached to a common network."
|
|
::= { prvtOspfIfEntry 7 }
|
|
|
|
prvtOspfIfDeadTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
::= { prvtOspfIfEntry 8 }
|
|
|
|
prvtOspfIfRetransmitInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (3..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets."
|
|
::= { prvtOspfIfEntry 9 }
|
|
|
|
prvtOspfIfOutputCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No description in main model!"
|
|
::= { prvtOspfIfEntry 10 }
|
|
|
|
prvtOspfIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER { simple(1), md5(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set authentication type of interface.
|
|
If not set, will use the one from area!"
|
|
::= { prvtOspfIfEntry 11 }
|
|
|
|
prvtOspfIfAuthSimple OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Simple authentication password (key).Up to 8 characters"
|
|
::= { prvtOspfIfEntry 12 }
|
|
|
|
prvtOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), broadcast(1), nbma(2),
|
|
pointToPoint(3), pointToMultipoint(5),
|
|
virtualLink(6), loopback(7) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No description in main model!"
|
|
::= { prvtOspfIfEntry 13 }
|
|
|
|
prvtOspfIfAuthMd5Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfIfAuthMd5Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for configuring message digest authentication password"
|
|
::= { prvtOspfObjects 17 }
|
|
|
|
prvtOspfIfAuthMd5Entry OBJECT-TYPE
|
|
SYNTAX PrvtOspfIfAuthMd5Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table rows"
|
|
INDEX { prvtOspfIfIpAddress, prvtOspfIfAuthMd5Key }
|
|
::= { prvtOspfIfAuthMd5Table 1 }
|
|
|
|
PrvtOspfIfAuthMd5Entry ::= SEQUENCE {
|
|
prvtOspfIfAuthMd5Key Integer32,
|
|
prvtOspfIfAuthMd5RowStatus RowStatus,
|
|
prvtOspfIfAuthMd5Word OCTET STRING
|
|
}
|
|
|
|
prvtOspfIfAuthMd5Key OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key."
|
|
::= { prvtOspfIfAuthMd5Entry 1 }
|
|
|
|
prvtOspfIfAuthMd5RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus."
|
|
::= { prvtOspfIfAuthMd5Entry 2 }
|
|
|
|
prvtOspfIfAuthMd5Word OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication word."
|
|
::= { prvtOspfIfAuthMd5Entry 3 }
|
|
|
|
prvtOspfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non-virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data Structure"
|
|
::= { prvtOspfObjects 18 }
|
|
|
|
prvtOspfNbrEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data Structure"
|
|
INDEX { prvtOspfNbrIpAddr, prvtOspfNbrAddressLessIndex }
|
|
::= { prvtOspfNbrTable 1 }
|
|
|
|
PrvtOspfNbrEntry ::= SEQUENCE {
|
|
prvtOspfNbrIpAddr PrvtOspfIpAddress,
|
|
prvtOspfNbrAddressLessIndex Integer32,
|
|
prvtOspfNbrRtrId PrvtOspfIpAddress,
|
|
prvtOspfNbrOptions Integer32,
|
|
prvtOspfNbrPriority PrvtOspfDesignatedRouterPriority,
|
|
prvtOspfNbrState INTEGER,
|
|
prvtOspfNbrEvents Counter32,
|
|
prvtOspfNbrLsRetransQLen Gauge32,
|
|
prvtOspfNbmaNbrPermanence INTEGER,
|
|
prvtOspfNbrHelloSuppressed TruthValue
|
|
}
|
|
|
|
prvtOspfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX PrvtOspfIpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this neighbor is using in its
|
|
IP Source Address. Note that, on addressless
|
|
links, this will not be 0.0.0.0, but the ad-
|
|
dress of another of the neighbor's interfaces."
|
|
::= { prvtOspfNbrEntry 1 }
|
|
|
|
prvtOspfNbrAddressLessIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (-2147483648..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On an interface having an IP Address, zero.
|
|
On addressless interfaces, the corresponding
|
|
value of ifIndex in the Internet Standard MIB.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { prvtOspfNbrEntry 2 }
|
|
|
|
prvtOspfNbrRtrId OBJECT-TYPE
|
|
SYNTAX PrvtOspfIpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
::= { prvtOspfNbrEntry 3 }
|
|
|
|
prvtOspfNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 0, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 1, if set, indicates that the associated
|
|
area accepts and operates on external informa-
|
|
tion; if zero, it is a stub area.
|
|
|
|
Bit 2, if set, indicates that the system is ca-
|
|
pable of routing IP Multicast datagrams; i.e.,
|
|
that it implements the Multicast Extensions to
|
|
OSPF.
|
|
|
|
Bit 3, if set, indicates that the associated
|
|
area is an NSSA. These areas are capable of
|
|
carrying type 7 external advertisements, which
|
|
are translated into type 5 external advertise-
|
|
ments at NSSA borders."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.2 Options"
|
|
::= { prvtOspfNbrEntry 4 }
|
|
|
|
prvtOspfNbrPriority OBJECT-TYPE
|
|
SYNTAX PrvtOspfDesignatedRouterPriority
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
::= { prvtOspfNbrEntry 5 }
|
|
|
|
prvtOspfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER { down(1), attempt(2), init(3), twoWay(4),
|
|
exchangeStart(5), exchange(6), loading(7), full(8) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
::= { prvtOspfNbrEntry 6 }
|
|
|
|
prvtOspfNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this neighbor relationship
|
|
has changed state, or an error has occurred."
|
|
::= { prvtOspfNbrEntry 7 }
|
|
|
|
prvtOspfNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission queue."
|
|
::= { prvtOspfNbrEntry 8 }
|
|
|
|
prvtOspfNbmaNbrPermanence OBJECT-TYPE
|
|
SYNTAX INTEGER { dynamic(1), permanent(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the entry.
|
|
'dynamic' and 'permanent' refer to how
|
|
the neighbor became known."
|
|
::= { prvtOspfNbrEntry 10 }
|
|
|
|
prvtOspfNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { prvtOspfNbrEntry 11 }
|
|
|
|
prvtOspfRedistributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table represents the routing protocols, redistributed into the OSPF
|
|
routing domain.
|
|
|
|
Creation of conceptual row in the table starts the redistribution of the
|
|
specified protocol, which would lead to the injection of routing information
|
|
from that protocol into the OSPF.
|
|
|
|
Deletion of conceptual row would stop the redistribution of that protocol
|
|
into the OSPF.
|
|
|
|
OSPF router, which redistributes routing information from other
|
|
protocols, is an ASBR router"
|
|
::= { prvtOspfObjects 19 }
|
|
|
|
prvtOspfRedistributeEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row represents a routing protocol, redistributed into OSPF"
|
|
INDEX { prvtOspfRedistributeProtocol }
|
|
::= { prvtOspfRedistributeTable 1 }
|
|
|
|
PrvtOspfRedistributeEntry ::= SEQUENCE {
|
|
prvtOspfRedistributeProtocol INTEGER,
|
|
prvtOspfRedistributeRowStatus RowStatus,
|
|
prvtOspfRedistributeMetric1 Integer32,
|
|
prvtOspfRedistributeMetric2 Integer32,
|
|
prvtOspfRedistributeRouteMap OCTET STRING
|
|
}
|
|
|
|
prvtOspfRedistributeProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER { kernel(2), connected(3), static(4),
|
|
default(17) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The specific routes redistributed into OSPF. For T4R model the valid values
|
|
are connected, rip and static.
|
|
For all the other models all of the above routes can be redistributed "
|
|
::= { prvtOspfRedistributeEntry 1 }
|
|
|
|
prvtOspfRedistributeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of the row. Setting of this field to active enables the
|
|
redistribution of the protocol.
|
|
|
|
Setting this field to destroy disables the redistribution of the protocol."
|
|
::= { prvtOspfRedistributeEntry 2 }
|
|
|
|
prvtOspfRedistributeMetric1 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric 1, with which the external routes will be redistributed in the OSPF"
|
|
::= { prvtOspfRedistributeEntry 3 }
|
|
|
|
prvtOspfRedistributeMetric2 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric 2, with which the external routes will be redistributed in the OSPF"
|
|
::= { prvtOspfRedistributeEntry 4 }
|
|
|
|
prvtOspfRedistributeRouteMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map that would filter the redistributed routing information"
|
|
::= { prvtOspfRedistributeEntry 5 }
|
|
|
|
prvtOspfRouterDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfRouterDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about available routers"
|
|
::= { prvtOspfObjects 20 }
|
|
|
|
prvtOspfRouterDataEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfRouterDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row represents a routing entry"
|
|
INDEX { prvtOspfRouterDataPrefix, prvtOspfRouterDataType,
|
|
prvtOspfRouterDataAreaId }
|
|
::= { prvtOspfRouterDataTable 1 }
|
|
|
|
PrvtOspfRouterDataEntry ::= SEQUENCE {
|
|
prvtOspfRouterDataPrefix OCTET STRING,
|
|
prvtOspfRouterDataType INTEGER,
|
|
prvtOspfRouterDataAreaId OCTET STRING,
|
|
prvtOspfRouterDataId IpAddress,
|
|
prvtOspfRouterDataCost Unsigned32,
|
|
prvtOspfRouterDataCostType Unsigned32,
|
|
prvtOspfRouterDataDestType INTEGER,
|
|
prvtOspfRouterDataPathType INTEGER,
|
|
prvtOspfRouterDataFlags BITS,
|
|
prvtOspfRouterDataExternalRouting INTEGER,
|
|
prvtOspfRouterDataTag Integer32
|
|
}
|
|
|
|
prvtOspfRouterDataPrefix OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(5))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 1 }
|
|
|
|
prvtOspfRouterDataType OBJECT-TYPE
|
|
SYNTAX INTEGER { network(1), router(2), external(3) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 2 }
|
|
|
|
prvtOspfRouterDataAreaId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4 | 16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 3 }
|
|
|
|
prvtOspfRouterDataId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 4 }
|
|
|
|
prvtOspfRouterDataCost OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 5 }
|
|
|
|
prvtOspfRouterDataCostType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 6 }
|
|
|
|
prvtOspfRouterDataDestType OBJECT-TYPE
|
|
SYNTAX INTEGER { router(1), network(2), disables(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 7 }
|
|
|
|
prvtOspfRouterDataPathType OBJECT-TYPE
|
|
SYNTAX INTEGER { intraArea(1), interArea(2), external1(3),
|
|
external3(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 8 }
|
|
|
|
prvtOspfRouterDataFlags OBJECT-TYPE
|
|
SYNTAX BITS { abr(0), asbr(1), virtual(2), unknown(3), nssa(4),
|
|
shortcut(5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 9 }
|
|
|
|
prvtOspfRouterDataExternalRouting OBJECT-TYPE
|
|
SYNTAX INTEGER { default(0), stub(1), nssa(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 10 }
|
|
|
|
prvtOspfRouterDataTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterDataEntry 11 }
|
|
|
|
prvtOspfRouterPathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtOspfRouterPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about available router's paths"
|
|
::= { prvtOspfObjects 21 }
|
|
|
|
prvtOspfRouterPathEntry OBJECT-TYPE
|
|
SYNTAX PrvtOspfRouterPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row represents a routing's path entry"
|
|
INDEX { prvtOspfRouterDataPrefix, prvtOspfRouterDataType,
|
|
prvtOspfRouterDataAreaId, prvtOspfRouterPathNextHop }
|
|
::= { prvtOspfRouterPathTable 1 }
|
|
|
|
PrvtOspfRouterPathEntry ::= SEQUENCE {
|
|
prvtOspfRouterPathNextHop OCTET STRING,
|
|
prvtOspfRouterPathAdvertisingRouter OCTET STRING,
|
|
prvtOspfRouterPathInterfaceName OCTET STRING
|
|
}
|
|
|
|
prvtOspfRouterPathNextHop OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4 | 16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterPathEntry 1 }
|
|
|
|
prvtOspfRouterPathAdvertisingRouter OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4 | 16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterPathEntry 2 }
|
|
|
|
prvtOspfRouterPathInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown in main data model"
|
|
::= { prvtOspfRouterPathEntry 3 }
|
|
|
|
prvtOspfTrafficEngEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to 'true' to enable the traffic engineering extensions of OSPF.
|
|
Note that enabling traffic engineering requires that router interface lo1
|
|
(PRVT-SWITCH-IPVLAN-MIB::ipInterfaceIpAddress.lo1) be configured with a
|
|
valid IP address (not 0.0.0.0 or 127.0.0.1). An attempt to enable traffic
|
|
engineering without such a valid address will fail (error returned)."
|
|
::= { prvtOspfObjects 22 }
|
|
|
|
END -- end of module PRVT-OSPF-MIB.
|