mibs/MIBS/telco-systems/binox/PRVT-PORTS-AGGREGATION-MIB
2023-12-05 12:25:34 +01:00

615 lines
21 KiB
Plaintext

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-PORTS-AGGREGATION-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------
PRVT-PORTS-AGGREGATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndex
FROM IF-MIB
switch
FROM PRVT-SWITCH-MIB
Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE,
OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC;
prvtPortsAggregationMIB MODULE-IDENTITY
LAST-UPDATED "201402050000Z"
ORGANIZATION
"BATM Advanced Communication"
CONTACT-INFO
"BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION
"The Ports Aggregation MIB module for
managing switch or ipSwitch static and
dynamic port aggregation."
REVISION "201001070000Z"
DESCRIPTION
"Initial"
::= { switch 106 }
PrvtPortsAggregationMacSecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of a port with regards to MAC count."
SYNTAX INTEGER { noViolation(1), watermarkReached(2),
maxMacCountReached(3), errorState(4) }
prvtPortsAggregationNotifications OBJECT IDENTIFIER
::= { prvtPortsAggregationMIB 0 }
prvtPortsAggregationObjects OBJECT IDENTIFIER
::= { prvtPortsAggregationMIB 1 }
prvtPortsAggregationDistributionType OBJECT-TYPE
SYNTAX INTEGER { l2(1), l3(2), l4(3), mpls(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LACP distribution type.
l2 - MAC address based distribution
l3 - IP address based distribution
l4 - TCP/UDP IP address based distribution
mpls -MPLS label based distribution"
::= { prvtPortsAggregationObjects 1 }
portsAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortsAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the status of all the
trunks in the system. It can contain two
major types: static and dynamic trunks."
::= { prvtPortsAggregationObjects 2 }
portsAggregationEntry OBJECT-TYPE
SYNTAX PortsAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ports aggregation entry."
INDEX { portsAggregationName }
::= { portsAggregationTable 1 }
PortsAggregationEntry ::= SEQUENCE {
portsAggregationName OCTET STRING,
portsAggregationRowStatus RowStatus,
portsAggregationDescription OCTET STRING,
portsAggregationMode INTEGER,
portsAggregationLacpEnable TruthValue,
portsAggregationLacpMode INTEGER,
portsAggregationLacpAdminKey Unsigned32,
portsAggregationLacpId MacAddress,
portsAggregationLacpMarker TruthValue,
portsAggregationLacpSystemPriority Unsigned32,
portsAggregationOperStatus INTEGER,
portsAggregationPortCount Unsigned32,
portsAggregationUplinkCount Unsigned32,
portsAggregationIfInOctets Counter64,
portsAggregationIfInUcastPkts Counter64,
portsAggregationIfInNUcastPkts Counter64,
portsAggregationIfInErrors Counter64,
portsAggregationIfInUnknownProtos Counter64,
portsAggregationIfOutOctets Counter64,
portsAggregationIfOutUcastPkts Counter64,
portsAggregationIfOutNUcastPkts Counter64,
portsAggregationIfOutErrors Counter64,
portsAggregationIfInMulticastPkts Counter64,
portsAggregationIfInBroadcastPkts Counter64,
portsAggregationIfInDiscardsPkts Counter64,
portsAggregationIfOutMulticastPkts Counter64,
portsAggregationIfOutBroadcastPkts Counter64,
portsAggregationLacpFastRate TruthValue,
portsAggregationLacpSelectionCriteria INTEGER,
portsAggregationLacpTxOnStandby TruthValue,
portsAggregationLacpForceActive Unsigned32,
portsAggregationFailoverTime OCTET STRING,
portsAggregationMacSecIfProfile OCTET STRING,
portsAggregationMacSecIfCurrMacCount Unsigned32,
portsAggregationMacSecIfState PrvtPortsAggregationMacSecType,
portsAggregationEvPropProfile OCTET STRING
}
portsAggregationName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..5))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggregation Name:
pattern ag(([1-9])|([1-9][0-9])|(1[0-9][0-9])|(2[0-5][0-6]))"
::= { portsAggregationEntry 1 }
portsAggregationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation row status."
::= { portsAggregationEntry 2 }
portsAggregationDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation description."
::= { portsAggregationEntry 3 }
portsAggregationMode OBJECT-TYPE
SYNTAX INTEGER { access(1), network(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation mode."
::= { portsAggregationEntry 4 }
portsAggregationLacpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Link Aggregation Control Protocol (LACP) Configuration"
::= { portsAggregationEntry 5 }
portsAggregationLacpMode OBJECT-TYPE
SYNTAX INTEGER { passive(1), active(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation lacp mode."
::= { portsAggregationEntry 6 }
portsAggregationLacpAdminKey OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation administrative key."
::= { portsAggregationEntry 7 }
portsAggregationLacpId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify LACP ID (MAC address format)."
::= { portsAggregationEntry 8 }
portsAggregationLacpMarker OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation lacp marker."
::= { portsAggregationEntry 9 }
portsAggregationLacpSystemPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation lacp priority."
::= { portsAggregationEntry 10 }
portsAggregationOperStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregation operational status."
::= { portsAggregationEntry 11 }
portsAggregationPortCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregation ports count."
::= { portsAggregationEntry 12 }
portsAggregationUplinkCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregation uplink ports count."
::= { portsAggregationEntry 13 }
portsAggregationIfInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters."
::= { portsAggregationEntry 14 }
portsAggregationIfInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer."
::= { portsAggregationEntry 15 }
portsAggregationIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer."
::= { portsAggregationEntry 16 }
portsAggregationIfInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol."
::= { portsAggregationEntry 17 }
portsAggregationIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0."
::= { portsAggregationEntry 18 }
portsAggregationIfOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portsAggregationEntry 19 }
portsAggregationIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { portsAggregationEntry 20 }
portsAggregationIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { portsAggregationEntry 21 }
portsAggregationIfOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors."
::= { portsAggregationEntry 22 }
portsAggregationIfInMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses."
::= { portsAggregationEntry 23 }
portsAggregationIfInBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer."
::= { portsAggregationEntry 24 }
portsAggregationIfInDiscardsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space."
::= { portsAggregationEntry 25 }
portsAggregationIfOutMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portsAggregationEntry 26 }
portsAggregationIfOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent."
::= { portsAggregationEntry 27 }
portsAggregationLacpFastRate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify LACP transmission interval."
::= { portsAggregationEntry 28 }
portsAggregationLacpSelectionCriteria OBJECT-TYPE
SYNTAX INTEGER { highest-count(1), highest-weight(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify LACP active Sub-LAG selection criteria."
::= { portsAggregationEntry 29 }
portsAggregationLacpTxOnStandby OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable transmission of LACP PDUs on links selected as standby."
::= { portsAggregationEntry 30 }
portsAggregationLacpForceActive OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Force the active Sub-LAG."
::= { portsAggregationEntry 31 }
portsAggregationFailoverTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since last Sub-LAG failover."
::= { portsAggregationEntry 32 }
portsAggregationMacSecIfProfile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a learning profile from prvtMacSecLrnProfTable."
::= { portsAggregationEntry 33 }
portsAggregationMacSecIfCurrMacCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current MAC count for this entry."
::= { portsAggregationEntry 34 }
portsAggregationMacSecIfState OBJECT-TYPE
SYNTAX PrvtPortsAggregationMacSecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of this entry."
::= { portsAggregationEntry 35 }
portsAggregationEvPropProfile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Event propagation profile name, aplied to this aggregation."
::= { portsAggregationEntry 36 }
portsAggregationPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortsAggregationPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ports in trunk."
::= { prvtPortsAggregationObjects 3 }
portsAggregationPortsEntry OBJECT-TYPE
SYNTAX PortsAggregationPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ports aggregation entry."
INDEX { portsAggregationName, portsAggregationPortsIfIndex }
::= { portsAggregationPortsTable 1 }
PortsAggregationPortsEntry ::= SEQUENCE {
portsAggregationPortsIfIndex InterfaceIndex,
portsAggregationPortsRowStatus RowStatus,
portsAggregationPortsPriority Unsigned32,
portsAggregationPortsSubLag Unsigned32
}
portsAggregationPortsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggregation port index."
::= { portsAggregationPortsEntry 1 }
portsAggregationPortsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation ports row status."
::= { portsAggregationPortsEntry 2 }
portsAggregationPortsPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation port priority."
::= { portsAggregationPortsEntry 3 }
portsAggregationPortsSubLag OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation port Sub-LAG."
::= { portsAggregationPortsEntry 4 }
lagMemberLinkUp NOTIFICATION-TYPE
OBJECTS { portsAggregationUplinkCount }
STATUS current
DESCRIPTION
"This notification is generated
when a port in lag link becomes up."
::= { prvtPortsAggregationNotifications 1 }
lagMemberLinkDown NOTIFICATION-TYPE
OBJECTS { portsAggregationUplinkCount }
STATUS current
DESCRIPTION
"This notification is generated
when a port in lag link becomes down."
::= { prvtPortsAggregationNotifications 2 }
lagMemberAdd NOTIFICATION-TYPE
OBJECTS { portsAggregationPortCount }
STATUS current
DESCRIPTION
"This notification is generated when a new port is added to
a lag link."
::= { prvtPortsAggregationNotifications 3 }
lagMemberRemove NOTIFICATION-TYPE
OBJECTS { portsAggregationPortCount }
STATUS current
DESCRIPTION
"This notification is generated when a port is removed from
a lag."
::= { prvtPortsAggregationNotifications 4 }
lagLinkUp NOTIFICATION-TYPE
OBJECTS { portsAggregationOperStatus }
STATUS current
DESCRIPTION
"This notification is generated when lag link becomes
up."
::= { prvtPortsAggregationNotifications 5 }
lagLinkDown NOTIFICATION-TYPE
OBJECTS { portsAggregationOperStatus }
STATUS current
DESCRIPTION
"This notification is generated when lag link becomes
down."
::= { prvtPortsAggregationNotifications 6 }
portsAggregationWmarkViolation NOTIFICATION-TYPE
OBJECTS { portsAggregationName }
STATUS current
DESCRIPTION
""
::= { prvtPortsAggregationNotifications 7 }
portsAggregationViolation NOTIFICATION-TYPE
OBJECTS { portsAggregationName }
STATUS current
DESCRIPTION
""
::= { prvtPortsAggregationNotifications 8 }
END -- end of module PRVT-PORTS-AGGREGATION-MIB.