david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/waystream/WAYSTREAM-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2118 lines
52 KiB
Plaintext
Raw Blame History

WAYSTREAM-MIB DEFINITIONS ::= BEGIN
--
-- This is the Waystream Management Information Base definition for iBOS, to be
-- to be used with Waystream products which use the operating system.
--
-- Copyright (c) 2017 Waystream AB, All rights reserved
--
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Unsigned32,
Counter64,
Gauge32,
TimeTicks
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
wsMgmt,
wsExperiment
FROM WAYSTREAM-SMI;
--
-- Waystream IBOS
--
ibos MODULE-IDENTITY
LAST-UPDATED "201702101100Z" -- February 10, 2017
ORGANIZATION "Waystream AB"
CONTACT-INFO
"Waystream AB
Customer Service
Mail : Farogatan 33
SE-164 51 Kista
Sweden
Tel : +46 8 5626 9450
E-mail: info@waystream.com
Web : http://www.waystream.com"
DESCRIPTION
"The Waystream MIB describing iBOS functionality of ASRs"
REVISION "201710231100Z" -- October 23, 2017
DESCRIPTION
"Added SFP all unit values, SFP part and serial numbers."
REVISION "201709181100Z" -- September 18, 2017
DESCRIPTION
"Added SFP RX/TX power dBm values."
REVISION "201702101100Z" -- February 10, 2017
DESCRIPTION
"Company name change:
In October 2015 PacketFront Network Products was renamed Waystream.
In this update all PacketFront were changed to Waystream and all
pf* to ws*."
REVISION "201207051930Z"
DESCRIPTION
"Added sBasePX (BASE-PX) and sBaseBX10 (BASE-BX10) bits
to pfSFPTransceiver (see SFF-8472 standard)."
REVISION "201112200908Z"
DESCRIPTION
"Add 100M and 10G SFP information from SFF-8472 specification.
The column pfSFPTransceiver has new bits s100BaseFX and s100BaseLX,
a new column pfSFPTransceiverExt which is a combination of the
10G Ethernet Compliance Codes SFP+ Cable Technology information."
REVISION "201112060934Z"
DESCRIPTION
"Added new table pfXFPTable that mirrors the pfSFPTable but with minor
differencies in parameter set and interpretation."
REVISION "201101111755Z" -- January 11, 2011
DESCRIPTION
"Updated company name"
REVISION "200904171529Z"
DESCRIPTION
"Moved pfCopy to PACKETFRONT-COPY-MIB and added environment notifications
to the MIB at pfIbosEnvironmentNotifications."
REVISION "200903231102Z"
DESCRIPTION
"Updated telephone information in contact-info. Reordered revision
information. Fixed enumerated types not starting from zero"
REVISION "200804301426Z"
DESCRIPTION
"Moved pfRpm to PACKETFRONT-RPM-MIB
Moved pfIgmp to PACKETFRONT-IGMP-CACHE-MIB
Moved pfProduct to PACKETFRONT-PRODUCTS-MIB
Moved boilerplate to PACKETFRONT-SMI and PACKETFRONT-TC"
REVISION "200710031835Z"
DESCRIPTION
"Added pfRpm"
REVISION "200706131437Z"
DESCRIPTION
"Added pfIgmp"
REVISION "200610181341Z"
DESCRIPTION
"Corrected pfAccounting member types"
REVISION "200608231100Z"
DESCRIPTION
"Added pfVersionString OID"
REVISION "200601251330Z"
DESCRIPTION
"Changed name of pfNeighbourPlatform to pfNeighbourModel. Added OID for ASR10K."
REVISION "200505101124Z"
DESCRIPTION
"Added missing connector type SC."
REVISION "200502010911Z"
DESCRIPTION
"Corrected pfPolicyTable entry types. Added description for pfPolicyUseCnt."
REVISION "200501141500Z"
DESCRIPTION
"Added pfAccounting extensions to the MIB."
REVISION "200410201434Z"
DESCRIPTION
"Added the ipdConfig object"
REVISION "200405141155Z"
DESCRIPTION
"Updated to reflect PacketFronts new corporate address"
::= { wsMgmt 1 }
--
-- System management objects
wsSystem OBJECT-IDENTITY
STATUS current
DESCRIPTION
"System management objects"
::= { ibos 1 }
-- Test object
wsWritedummy OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a read-write object that accept an
integer. The value written has no effect on the
system, but a successful write indicate that
SNMP write operations are possible on the target
router. The last written value can be read back"
::= { wsSystem 1 }
-- Restart the system
wsReload OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to restart the target router
by setting the number of seconds until system
reload. A value of 0 cancels any pending reload.
The value returned when reading the object is the
number of seconds remaining until reload"
::= { wsSystem 2 }
-- System iBOS version
wsVersion OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The iBOS version indicator"
::= { wsSystem 3 }
-- System iBOS version
wsAsrRevision OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ASR hardware revision"
::= { wsSystem 4 }
-- System iBOS version string
wsVersionString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual representation of the iBOS version.
For iBOS versions after 3.2, this field should be
used to identify the iBOS version instead of the
old wsVersion OID"
::= { wsSystem 5 }
--
-- Environment data
wsEnvironment OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Environtment data"
::= { ibos 2 }
-- Temperature table
wsTempTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of values from temperature sensors."
::= { wsEnvironment 1 }
wsTempEntry OBJECT-TYPE
SYNTAX WsTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a temperature sensor."
INDEX { wsTempSensor }
::= { wsTempTable 1 }
WsTempEntry ::=
SEQUENCE {
wsTempSensor Unsigned32,
wsTempMeasured Integer32,
wsTempTOS Integer32,
wsTempTHYST Integer32,
wsTempThresholdLow Integer32,
wsTempThresholdHigh Integer32,
wsTempStatus INTEGER
}
wsTempSensor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor number."
::= { wsTempEntry 1 }
wsTempMeasured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured temperature in 100ths of degrees centigrade."
::= { wsTempEntry 2 }
wsTempTOS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TOS in 100ths of degrees centigrade."
::= { wsTempEntry 3 }
wsTempTHYST OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"THYST in 100ths of degrees centigrade."
::= { wsTempEntry 4 }
wsTempThresholdLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold (low) in 100ths of degrees centigrade."
::= { wsTempEntry 5 }
wsTempThresholdHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold (high) in 100ths of degrees centigrade."
::= { wsTempEntry 6 }
wsTempStatus OBJECT-TYPE
SYNTAX INTEGER {
failed(-1),
ok(0),
high(1),
low(2),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status (measurement compared to threshold)."
::= { wsTempEntry 7 }
-- Voltage table
wsVoltTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsVoltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of measured board voltages."
::= { wsEnvironment 2 }
wsVoltEntry OBJECT-TYPE
SYNTAX WsVoltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a board voltage."
INDEX { wsVoltChannel }
::= { wsVoltTable 1 }
WsVoltEntry ::=
SEQUENCE {
wsVoltChannel Unsigned32,
wsVoltNominal Integer32,
wsVoltMeasured Integer32,
wsVoltThresholdLow Integer32,
wsVoltThresholdHigh Integer32,
wsVoltStatus INTEGER
}
wsVoltChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage channel number."
::= { wsVoltEntry 1 }
wsVoltNominal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nominal voltage in mV for channel."
::= { wsVoltEntry 2 }
wsVoltMeasured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured voltage in mV for channel."
::= { wsVoltEntry 3 }
wsVoltThresholdLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold (low) voltage in mV for channel."
::= { wsVoltEntry 4 }
wsVoltThresholdHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold (high) voltage in mV for channel."
::= { wsVoltEntry 5 }
wsVoltStatus OBJECT-TYPE
SYNTAX INTEGER {
na(-3),
failed(-1),
ok(0),
high(1),
low(2),
notPresent(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status (measurement compared to threshold)."
::= { wsVoltEntry 6 }
-- Fan speed table
wsFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of measured rotation speeds for external fans."
::= { wsEnvironment 3 }
wsFanEntry OBJECT-TYPE
SYNTAX WsFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a fan."
INDEX { wsFanNumber }
::= { wsFanTable 1 }
WsFanEntry ::=
SEQUENCE {
wsFanNumber Unsigned32,
wsFanRPM Integer32
}
wsFanNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan number."
::= { wsFanEntry 1 }
wsFanRPM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan speed in revolutions per minute."
::= { wsFanEntry 2 }
-- Fan driving voltage
wsFanVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan driving voltage (in mV)."
::= { wsEnvironment 4 }
-- Provides control over if send ibos environment related traps
wsIbosEnvironmentTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control over iBOS environment related traps."
::= { wsEnvironment 5 }
--
-- PFDP data
wsPFDP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"PFDP data"
::= { ibos 3 }
-- PFDP Neighbours Table
wsNeighboursTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsNeighboursEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of discovered PFDB Neighbours."
::= { wsPFDP 1 }
wsNeighboursEntry OBJECT-TYPE
SYNTAX WsNeighboursEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a neighbour."
INDEX { wsNeighbourIfIndex, wsNeighbourNIndex }
::= { wsNeighboursTable 1 }
WsNeighboursEntry ::=
SEQUENCE {
wsNeighbourIfIndex Unsigned32,
wsNeighbourNIndex Unsigned32,
wsNeighbourHostname DisplayString,
wsNeighbourLocalIf DisplayString,
wsNeighbourRemoteIf DisplayString,
wsNeighbourModel DisplayString,
wsNeighbourLastAct Integer32,
wsNeighbourOSVersion DisplayString,
wsNeighbourSNPA OCTET STRING,
wsNeighbourUptime Unsigned32,
wsNeighbourState INTEGER,
wsNeighbourDBCount Unsigned32,
wsNeighbourCreated TimeTicks,
wsNeighbourPacketsIn Unsigned32,
wsNeighbourPacketErrorsrIn Unsigned32
}
wsNeighbourIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour interface index."
::= { wsNeighboursEntry 1 }
wsNeighbourNIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour index."
::= { wsNeighboursEntry 2 }
wsNeighbourHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour hostname."
::= { wsNeighboursEntry 3 }
wsNeighbourLocalIf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local interface that neighbour is on."
::= { wsNeighboursEntry 4 }
wsNeighbourRemoteIf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote interface of neighbour."
::= { wsNeighboursEntry 5 }
wsNeighbourModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour model."
::= { wsNeighboursEntry 6 }
wsNeighbourLastAct OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time in seconds since last neighbour advertisment."
::= { wsNeighboursEntry 7 }
wsNeighbourOSVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour OS version."
::= { wsNeighboursEntry 8 }
wsNeighbourSNPA OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNPA of neighbour interface."
::= { wsNeighboursEntry 9 }
wsNeighbourUptime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uptime in seconds for neighbour."
::= { wsNeighboursEntry 10 }
wsNeighbourState OBJECT-TYPE
SYNTAX INTEGER {
bidirectional(1),
unidirectional(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of neighbour."
::= { wsNeighboursEntry 11 }
wsNeighbourDBCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Database entries for neighbour."
::= { wsNeighboursEntry 12 }
wsNeighbourCreated OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the neighbour
first appeared on the interface."
::= { wsNeighboursEntry 13 }
wsNeighbourPacketsIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PFDP packets received from neighbour."
::= { wsNeighboursEntry 14 }
wsNeighbourPacketErrorsrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of erroneous PFDP packets received from
neighbour."
::= { wsNeighboursEntry 15 }
-- PFDP Neighbour Ports Table
wsNeighbourPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsNeighbourPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ports of discovered PFDB Neighbours."
::= { wsPFDP 2 }
wsNeighbourPortsEntry OBJECT-TYPE
SYNTAX WsNeighbourPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a port of a neighbour."
INDEX { wsNeighbourPortIfIndex, wsNeighbourPortNIndex, wsNeighbourPortPIndex }
::= { wsNeighbourPortsTable 1 }
WsNeighbourPortsEntry ::=
SEQUENCE {
wsNeighbourPortIfIndex Unsigned32,
wsNeighbourPortNIndex Unsigned32,
wsNeighbourPortPIndex Unsigned32,
wsNeighbourPortName DisplayString,
wsNeighbourPortState BITS,
wsNeighbourPortTxOctets Counter64,
wsNeighbourPortTxDropPkts Unsigned32,
wsNeighbourPortTxBroadcastPkts Unsigned32,
wsNeighbourPortTxMulticastPkts Unsigned32,
wsNeighbourPortTxUnicastPkts Unsigned32,
wsNeighbourPortTxCollisions Unsigned32,
wsNeighbourPortTxDeferredTransmit Unsigned32,
wsNeighbourPortTxFrameInDisc Unsigned32,
wsNeighbourPortRxOctets Counter64,
wsNeighbourPortRxUndersizePkts Unsigned32,
wsNeighbourPortPkts64Octets Unsigned32,
wsNeighbourPortPkts65to127Octets Unsigned32,
wsNeighbourPortPkts128to255Octets Unsigned32,
wsNeighbourPortPkts256to511Octets Unsigned32,
wsNeighbourPortPkts512to1023Octets Unsigned32,
wsNeighbourPortPkts1024to1522Octets Unsigned32,
wsNeighbourPortRxOversizePkts Unsigned32,
wsNeighbourPortRxJabbers Unsigned32,
wsNeighbourPortRxAlignmentErrors Unsigned32,
wsNeighbourPortRxFCSErrors Unsigned32,
wsNeighbourPortRxGoodOctets Counter64,
wsNeighbourPortRxDropPkts Unsigned32,
wsNeighbourPortRxUnicastPkts Unsigned32,
wsNeighbourPortRxMulticastPkts Unsigned32,
wsNeighbourPortRxBroadcastPkts Unsigned32,
wsNeighbourPortRxFragments Unsigned32,
wsNeighbourPortRxExcessSizeDisc Unsigned32,
wsNeighbourPortRxSymbolError Unsigned32
}
wsNeighbourPortIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour interface index."
::= { wsNeighbourPortsEntry 1 }
wsNeighbourPortNIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour index."
::= { wsNeighbourPortsEntry 2 }
wsNeighbourPortPIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour port index."
::= { wsNeighbourPortsEntry 3 }
wsNeighbourPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of neighbour port."
::= { wsNeighbourPortsEntry 4 }
wsNeighbourPortState OBJECT-TYPE
SYNTAX BITS {
reserved0(0),
reserved1(1),
reserved2(2),
reserved3(3),
vlaninfo(4),
s100mbit(5),
fullduplex(6),
up(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of neighbour port."
::= { wsNeighbourPortsEntry 5 }
wsNeighbourPortTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good bytes of data transmitted by
a port (excluding preamble but including FCS)."
::= { wsNeighbourPortsEntry 6 }
wsNeighbourPortTxDropPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented every time a transmit
packet is dropped due to lack of resources (e.g.,
transmit FIFO underflow), or an internal MAC sublayer
transmit error not counted by.in either the
TxLateCollision or the TxExcessiveCollision counters."
::= { wsNeighbourPortsEntry 7 }
wsNeighbourPortTxBroadcastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets transmitted by a port that
are directed to a broadcast address. This counter does
not include errored broadcast packets or valid
multicast packets."
::= { wsNeighbourPortsEntry 8 }
wsNeighbourPortTxMulticastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets transmitted by a port that
are directed to a multicast address. This counter does
not include errored multicast packets or valid
broadcast packets."
::= { wsNeighbourPortsEntry 9 }
wsNeighbourPortTxUnicastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets transmitted by a port that
are addressed to a unicast address."
::= { wsNeighbourPortsEntry 10 }
wsNeighbourPortTxCollisions OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of collisions experienced by a port during
packet transmissions."
::= { wsNeighbourPortsEntry 11 }
wsNeighbourPortTxDeferredTransmit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by a port for which
the first transmission attempt is delayed because the
medium is busy."
::= { wsNeighbourPortsEntry 12 }
wsNeighbourPortTxFrameInDisc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid packets received which are
discarded by the forwarding process due to lack of
space on an output queue."
::= { wsNeighbourPortsEntry 13 }
wsNeighbourPortRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes of data received by a port
(excluding preamble but including FCS), including
bad packets."
::= { wsNeighbourPortsEntry 14 }
wsNeighbourPortRxUndersizePkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
less than 64 bytes long (excluding framing bits but
including the FCS)."
::= { wsNeighbourPortsEntry 15 }
wsNeighbourPortPkts64Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are 64 bytes long."
::= { wsNeighbourPortsEntry 16 }
wsNeighbourPortPkts65to127Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are between 65 and 127 bytes long."
::= { wsNeighbourPortsEntry 17 }
wsNeighbourPortPkts128to255Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are between 128 and 255 bytes long."
::= { wsNeighbourPortsEntry 18 }
wsNeighbourPortPkts256to511Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are between 256 and 511 bytes long."
::= { wsNeighbourPortsEntry 19 }
wsNeighbourPortPkts512to1023Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are between 512 and 1023 bytes long."
::= { wsNeighbourPortsEntry 20 }
wsNeighbourPortPkts1024to1522Octets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including error packets) that
are between 1024 and 1522 bytes long."
::= { wsNeighbourPortsEntry 21 }
wsNeighbourPortRxOversizePkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
greater than 1522 bytes inclusive (excluding framing
bits but including the FCS). Note that this counter
alone will be incremented for packets in the range
1523-1536 bytes inclusive, whereas both this counter
and the RxExcessSizeDisc counter will be incremented
for packets of 1537 bytes and higher."
::= { wsNeighbourPortsEntry 22 }
wsNeighbourPortRxJabbers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by a port that are
longer than 1522 bytes and have either an FCS error or
an alignment error."
::= { wsNeighbourPortsEntry 23 }
wsNeighbourPortRxAlignmentErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by a port that have a
length (excluding framing bits but including FCS)
between 64 and 1522 bytes, inclusive, and have a bad
FCS with a nonintegral number of bytes."
::= { wsNeighbourPortsEntry 24 }
wsNeighbourPortRxFCSErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by a port that have a
length (excluding framing bits but including FCS)
between 64 and 1522 bytes inclusive, and have a bad
FCS with an integral number of bytes."
::= { wsNeighbourPortsEntry 25 }
wsNeighbourPortRxGoodOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes in all good packets received
by a port (excluding framing bits but including FCS)."
::= { wsNeighbourPortsEntry 26 }
wsNeighbourPortRxDropPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that were
dropped due to lack of resources (e.g., lack of input
buffers) or were dropped due to lack of resources
before a determination of the validity of the packet
was able to be made (e.g., receive FIFO overflow). The
counter is only incremented if the receive error was
not counted by.either the RxExcessSizeDisc, the
RxAlignmentErrors or the RxFCSErrors counters."
::= { wsNeighbourPortsEntry 27 }
wsNeighbourPortRxUnicastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
addressed to a unicast address."
::= { wsNeighbourPortsEntry 28 }
wsNeighbourPortRxMulticastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
directed to a multicast address. This counter does not
include errored multicast packets or valid broadcast
packets."
::= { wsNeighbourPortsEntry 29 }
wsNeighbourPortRxBroadcastPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
directed to the broadcast address. This counter does
not include errored broadcast packets or valid
multicast packets."
::= { wsNeighbourPortsEntry 30 }
wsNeighbourPortRxFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by a port that are less
than 64 bytes (excluding framing bits) and have either
an FCS error or an alignment error."
::= { wsNeighbourPortsEntry 31 }
wsNeighbourPortRxExcessSizeDisc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received by a port that are
greater than 1536 bytes (excluding framing bits but
including the FCS) and were discarded due to excessive
length. Note that the RxOversizePkts counter alone is
incremented for packets in the range 1523-1536 bytes
inclusive, whereas both this counter and the
RxOversizePkts counter are incremented for packets of
1537 bytes and higher."
::= { wsNeighbourPortsEntry 32 }
wsNeighbourPortRxSymbolError OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a valid length packet was
received at a port and at least one invalid data
symbol was detected. Counter only increment once per
carrier event and does not increment on detection of
collision during the carrier event."
::= { wsNeighbourPortsEntry 33 }
-- PFDP Neighbour Ports SNPA Table
wsNeighbourPortSNPATable OBJECT-TYPE
SYNTAX SEQUENCE OF WsNeighbourPortSNPAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of known SNPA on ports of discovered PFDB Neighbours."
::= { wsPFDP 3 }
wsNeighbourPortSNPAEntry OBJECT-TYPE
SYNTAX WsNeighbourPortSNPAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a known SNPA on a port of a neighbour."
INDEX { wsNeighbourPortSNPAIfIndex, wsNeighbourPortSNPANIndex,
wsNeighbourPortSNPAPIndex, wsNeighbourPortSNPASIndex }
::= { wsNeighbourPortSNPATable 1 }
WsNeighbourPortSNPAEntry ::=
SEQUENCE {
wsNeighbourPortSNPAIfIndex Unsigned32,
wsNeighbourPortSNPANIndex Unsigned32,
wsNeighbourPortSNPAPIndex Unsigned32,
wsNeighbourPortSNPASIndex Unsigned32,
wsNeighbourPortSNPASMCast Integer32,
wsNeighbourPortSNPA OCTET STRING
}
wsNeighbourPortSNPAIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour interface index."
::= { wsNeighbourPortSNPAEntry 1 }
wsNeighbourPortSNPANIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour index."
::= { wsNeighbourPortSNPAEntry 2 }
wsNeighbourPortSNPAPIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour port index."
::= { wsNeighbourPortSNPAEntry 3 }
wsNeighbourPortSNPASIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbour port SNPA index."
::= { wsNeighbourPortSNPAEntry 4 }
wsNeighbourPortSNPASMCast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set to 1 if SNPA is a multicast address, 0 otherwise."
::= { wsNeighbourPortSNPAEntry 5 }
wsNeighbourPortSNPA OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Known SNPA on neighbour port."
::= { wsNeighbourPortSNPAEntry 6 }
--
-- SFP Table
wsSFPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsSFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table with information on SFPs."
::= { ibos 4 }
wsSFPEntry OBJECT-TYPE
SYNTAX WsSFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an SFP."
INDEX { wsSFPIndex }
::= { wsSFPTable 1 }
WsSFPEntry ::=
SEQUENCE {
wsSFPIndex Unsigned32,
wsSFPStatus INTEGER,
wsSFPConnector INTEGER,
wsSFPTransceiver BITS,
wsSFPEncoding INTEGER,
wsSFPBitrate Unsigned32,
wsSFPSingleModeLen Unsigned32,
wsSFPMultiMode50Len Unsigned32,
wsSFPMultiMode625Len Unsigned32,
wsSFPCopperLen Unsigned32,
wsSFPTempStatus INTEGER,
wsSFPTemp Integer32,
wsSFPVoltStatus INTEGER,
wsSFPVolt Integer32,
wsSFPTXCurrentStatus INTEGER,
wsSFPTXCurrent Integer32,
wsSFPTXPowerStatus INTEGER,
wsSFPTXPower Integer32,
wsSFPRXPowerStatus INTEGER,
wsSFPRXPower Integer32,
wsSFPTransceiverExt BITS,
wsSFPTXdBmPower Integer32,
wsSFPRXdBmPower Integer32,
wsSFPTempNormalLow Integer32,
wsSFPTempNormalHigh Integer32,
wsSFPTempWarningLow Integer32,
wsSFPTempWarningHigh Integer32,
wsSFPVoltNormalLow Integer32,
wsSFPVoltNormalHigh Integer32,
wsSFPVoltWarningLow Integer32,
wsSFPVoltWarningHigh Integer32,
wsSFPTXCurrentNormalLow Integer32,
wsSFPTXCurrentNormalHigh Integer32,
wsSFPTXCurrentWarningLow Integer32,
wsSFPTXCurrentWarningHigh Integer32,
wsSFPTXOutputPowNormalLowuW Integer32,
wsSFPTXOutputPowNormalHighuW Integer32,
wsSFPTXOutputPowWarningLowuW Integer32,
wsSFPTXOutputPowWarningHighuW Integer32,
wsSFPTXOutputPowNormalLowdBm Integer32,
wsSFPTXOutputPowNormalHighdBm Integer32,
wsSFPTXOutputPowWarningLowdBm Integer32,
wsSFPTXOutputPowWarningHighdBm Integer32,
wsSFPRXInputPowNormalLowuW Integer32,
wsSFPRXInputPowNormalHighuW Integer32,
wsSFPRXInputPowWarningLowuW Integer32,
wsSFPRXInputPowWarningHighuW Integer32,
wsSFPRXInputPowNormalLowdBm Integer32,
wsSFPRXInputPowNormalHighdBm Integer32,
wsSFPRXInputPowWarningLowdBm Integer32,
wsSFPRXInputPowWarningHighdBm Integer32,
wsSFPPartNumber DisplayString,
wsSFPSerialNumber DisplayString
}
wsSFPIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP number."
::= { wsSFPEntry 1 }
wsSFPStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
missing(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP status."
::= { wsSFPEntry 2 }
wsSFPConnector OBJECT-TYPE
SYNTAX INTEGER {
sc(1),
fiberJack(6),
lc(7),
mtrj(8),
mu(9),
sg(10),
opticalPigtail(11),
hssdcii(32),
copperPigtail(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connector type."
::= { wsSFPEntry 3 }
wsSFPTransceiver OBJECT-TYPE
SYNTAX BITS {
sBasePX(0),
sBaseBX10(1),
s100BaseFX(2),
s100BaseLX(3),
s1000BaseT(4),
s1000BaseCX(5),
s1000BaseLX(6),
s1000BaseSX(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver capablities."
::= { wsSFPEntry 4 }
wsSFPEncoding OBJECT-TYPE
SYNTAX INTEGER {
e8B10B(1),
e4B5B(2),
eNRZ(3),
eManchester(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encoding type."
::= { wsSFPEntry 5 }
wsSFPBitrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Bitrate (Mbps)."
::= { wsSFPEntry 6 }
wsSFPSingleModeLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported single mode fiber link length (m).
A value of 255000 means > 254000 m."
::= { wsSFPEntry 7 }
wsSFPMultiMode50Len OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported 50um multi-mode fiber link length (m).
A value of 2550 means > 2540 m."
::= { wsSFPEntry 8 }
wsSFPMultiMode625Len OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported 62.5um multi-mode fiber link length (m).
A value of 2550 means > 2540 m."
::= { wsSFPEntry 9 }
wsSFPCopperLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported copper link length (m).
A value of 255 means > 254 m."
::= { wsSFPEntry 10 }
wsSFPTempStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature status."
::= { wsSFPEntry 11 }
wsSFPTemp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured temperature in degrees centigrade."
::= { wsSFPEntry 12 }
wsSFPVoltStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage status."
::= { wsSFPEntry 13 }
wsSFPVolt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured voltage (mV)."
::= { wsSFPEntry 14 }
wsSFPTXCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current status."
::= { wsSFPEntry 15 }
wsSFPTXCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX current (mA)."
::= { wsSFPEntry 16 }
wsSFPTXPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX power status."
::= { wsSFPEntry 17 }
wsSFPTXPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX power (uW)."
::= { wsSFPEntry 18 }
wsSFPRXPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX power status."
::= { wsSFPEntry 19 }
wsSFPRXPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured RX power (uW)."
::= { wsSFPEntry 20 }
wsSFPTransceiverExt OBJECT-TYPE
SYNTAX BITS {
s10000BaseER(0),
s10000BaseLRM(1),
s10000BaseLR(2),
s10000BaseSR(3),
sActiveCable(4),
sPassiveCable(5),
reserved6(6),
reserved7(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G Ethernet Compliance Codes."
::= { wsSFPEntry 21 }
wsSFPTXdBmPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX power (dBm x 1000)."
::= { wsSFPEntry 22 }
wsSFPRXdBmPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured RX power (dBm x 1000)."
::= { wsSFPEntry 23 }
wsSFPTempNormalLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating temparature normal range low (C)."
::= { wsSFPEntry 24 }
wsSFPTempNormalHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating temparature normal range high (C)."
::= { wsSFPEntry 25 }
wsSFPTempWarningLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating temparature warning range low (C)."
::= { wsSFPEntry 26 }
wsSFPTempWarningHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating temparature warning range high (C)."
::= { wsSFPEntry 27 }
wsSFPVoltNormalLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supply voltage normal range low (mV)."
::= { wsSFPEntry 28 }
wsSFPVoltNormalHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supply voltage normal range high (mV)."
::= { wsSFPEntry 29 }
wsSFPVoltWarningLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supply voltage warning range low (mV)."
::= { wsSFPEntry 30 }
wsSFPVoltWarningHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supply voltage warning range high (mV)."
::= { wsSFPEntry 31 }
wsSFPTXCurrentNormalLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current normal range low (mA)."
::= { wsSFPEntry 32 }
wsSFPTXCurrentNormalHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current normal range high (mA)."
::= { wsSFPEntry 33 }
wsSFPTXCurrentWarningLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current warning range low (mA)."
::= { wsSFPEntry 34 }
wsSFPTXCurrentWarningHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current warning range high (mA)."
::= { wsSFPEntry 35 }
wsSFPTXOutputPowNormalLowuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power normal range low (uW)."
::= { wsSFPEntry 36 }
wsSFPTXOutputPowNormalHighuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power normal range high (uW)."
::= { wsSFPEntry 37 }
wsSFPTXOutputPowWarningLowuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power warning range low (uW)."
::= { wsSFPEntry 38 }
wsSFPTXOutputPowWarningHighuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power warning range high (uW)."
::= { wsSFPEntry 39 }
wsSFPTXOutputPowNormalLowdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power normal range low (dBm x 1000)."
::= { wsSFPEntry 40 }
wsSFPTXOutputPowNormalHighdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power normal range high (dBm x 1000)."
::= { wsSFPEntry 41 }
wsSFPTXOutputPowWarningLowdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power warning range low (dBm x 1000)."
::= { wsSFPEntry 42 }
wsSFPTXOutputPowWarningHighdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX output power warning range high (dBm x 1000)."
::= { wsSFPEntry 43 }
wsSFPRXInputPowNormalLowuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power normal range low (uW)."
::= { wsSFPEntry 44 }
wsSFPRXInputPowNormalHighuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power normal range high (uW)."
::= { wsSFPEntry 45 }
wsSFPRXInputPowWarningLowuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power warning range low (uW)."
::= { wsSFPEntry 46 }
wsSFPRXInputPowWarningHighuW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power warning range high (uW)."
::= { wsSFPEntry 47 }
wsSFPRXInputPowNormalLowdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power normal range low (dBm x 1000)."
::= { wsSFPEntry 48 }
wsSFPRXInputPowNormalHighdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power normal range high (dBm x 1000)."
::= { wsSFPEntry 49 }
wsSFPRXInputPowWarningLowdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power warning range low (dBm x 1000)."
::= { wsSFPEntry 50 }
wsSFPRXInputPowWarningHighdBm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX input power warning range high (dBm x 1000)."
::= { wsSFPEntry 51 }
wsSFPPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP part number."
::= { wsSFPEntry 52 }
wsSFPSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP serial number."
::= { wsSFPEntry 53 }
--
-- Accounting objects
wsAccounting OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Accounting objects"
::= { ibos 5 }
wsPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of policy accounting information."
::= { wsAccounting 1 }
wsPolicyEntry OBJECT-TYPE
SYNTAX WsPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a policy."
INDEX { wsPolicyIfIndex, wsPolicyName }
::= { wsPolicyTable 1 }
WsPolicyEntry ::=
SEQUENCE {
wsPolicyIfIndex Unsigned32,
wsPolicyIfName DisplayString,
wsPolicyName DisplayString,
wsPolicyCookie DisplayString,
wsPolicyInPkts Counter64,
wsPolicyInBytes Counter64,
wsPolicyInDrops Counter64,
wsPolicyOutPkts Counter64,
wsPolicyOutBytes Counter64,
wsPolicyOutDrops Counter64,
wsPolicyUsedCnt Gauge32
}
wsPolicyIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of policy accounting entry."
::= { wsPolicyEntry 1 }
wsPolicyIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name of policy accountin entry"
::= { wsPolicyEntry 2 }
wsPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of policy."
::= { wsPolicyEntry 3 }
wsPolicyCookie OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of policy cookie."
::= { wsPolicyEntry 4 }
wsPolicyInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input packets counter."
::= { wsPolicyEntry 5 }
wsPolicyInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input bytes counter."
::= { wsPolicyEntry 6 }
wsPolicyInDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number input packets dropped."
::= { wsPolicyEntry 7 }
wsPolicyOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output packets counter."
::= { wsPolicyEntry 8 }
wsPolicyOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output bytes counter."
::= { wsPolicyEntry 9 }
wsPolicyOutDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number input packets dropped."
::= { wsPolicyEntry 10 }
wsPolicyUsedCnt OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number policy maps set to use this policy."
::= { wsPolicyEntry 11 }
--
-- XFP Table
wsXFPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsXFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table with information on XFPs."
::= { ibos 6 }
wsXFPEntry OBJECT-TYPE
SYNTAX WsXFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an XFP."
INDEX { wsXFPIndex }
::= { wsXFPTable 1 }
WsXFPEntry ::=
SEQUENCE {
wsXFPIndex Unsigned32,
wsXFPStatus INTEGER,
wsXFPConnector INTEGER,
wsXFPTransceiver BITS,
wsXFPEncoding BITS,
wsXFPBitrateMin Unsigned32,
wsXFPBitrateMax Unsigned32,
wsXFPSingleModeLen Unsigned32,
wsXFPMultiMode50Len Unsigned32,
wsXFPMultiMode625Len Unsigned32,
wsXFPCopperLen Unsigned32,
wsXFPTempStatus INTEGER,
wsXFPTemp Integer32,
wsXFPTXCurrentStatus INTEGER,
wsXFPTXCurrent Integer32,
wsXFPTXPowerStatus INTEGER,
wsXFPTXPower Integer32,
wsXFPRXPowerStatus INTEGER,
wsXFPRXPower Integer32
}
wsXFPIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP number."
::= { wsXFPEntry 1 }
wsXFPStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
missing(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP status."
::= { wsXFPEntry 2 }
wsXFPConnector OBJECT-TYPE
SYNTAX INTEGER {
sc(1),
fiberJack(6),
lc(7),
mtrj(8),
mu(9),
sg(10),
opticalPigtail(11),
hssdcii(32),
copperPigtail(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connector type."
::= { wsXFPEntry 3 }
wsXFPTransceiver OBJECT-TYPE
SYNTAX BITS {
reserved0(0),
s10GBaseEW(1),
s10GBaseLW(2),
s10GBaseSW(3),
s10GBaseLRM(4),
s10GBaseER(5),
s10GBaseLR(6),
s10GBaseSR(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver capablities."
::= { wsXFPEntry 4 }
wsXFPEncoding OBJECT-TYPE
SYNTAX BITS {
reserved0(0),
reserved1(1),
reserved2(2),
eRZ(3),
eNRZ(4),
eSonetScrambl(5),
e8B10B(6),
e64B66B(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encoding type."
::= { wsXFPEntry 5 }
wsXFPBitrateMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP Min Bitrate (Mbps)."
::= { wsXFPEntry 6 }
wsXFPBitrateMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP Max Bitrate (Mbps)."
::= { wsXFPEntry 7 }
wsXFPSingleModeLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported single mode fiber link length (m).
A value of 255000 means > 254000 m."
::= { wsXFPEntry 8 }
wsXFPMultiMode50Len OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported 50um multi-mode fiber link length (m).
A value of 510 means > 508 m."
::= { wsXFPEntry 9 }
wsXFPMultiMode625Len OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported 62.5um multi-mode fiber link length (m).
A value of 255 means > 254 m."
::= { wsXFPEntry 10 }
wsXFPCopperLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported copper link length (m).
A value of 255 means > 254 m."
::= { wsXFPEntry 11 }
wsXFPTempStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature status."
::= { wsXFPEntry 12 }
wsXFPTemp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured temperature in degrees centigrade."
::= { wsXFPEntry 13 }
wsXFPTXCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX Current status."
::= { wsXFPEntry 14 }
wsXFPTXCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX current (mA)."
::= { wsXFPEntry 15 }
wsXFPTXPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX power status."
::= { wsXFPEntry 16 }
wsXFPTXPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX power (uW)."
::= { wsXFPEntry 17 }
wsXFPRXPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
alarmLow(1),
warnLow(2),
ok(3),
warnHigh(4),
alarmHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX power status."
::= { wsXFPEntry 18 }
wsXFPRXPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured RX power (uW)."
::= { wsXFPEntry 19 }
--
-- Waystream ibos environment related notifications
wsIbosEnvironmentNotifications OBJECT IDENTIFIER ::={ wsEnvironment 0 }
wsIbosTempLow NOTIFICATION-TYPE
OBJECTS { wsTempSensor, wsTempMeasured, wsTempThresholdLow, wsTempStatus }
STATUS current
DESCRIPTION
"A wsIbosTempLow trap signifies that the SNMP entity,
acting in an agent role, has detected that one of its
temperature sensors is outside of the predefined low
threshold."
::= { wsIbosEnvironmentNotifications 1 }
wsIbosTempHigh NOTIFICATION-TYPE
OBJECTS { wsTempSensor, wsTempMeasured, wsTempThresholdHigh, wsTempStatus }
STATUS current
DESCRIPTION
"A wsIbosTempHigh trap signifies that the SNMP entity,
acting in an agent role, has detected that one of its
temperature sensors is outside of the predefined high
threshold."
::= { wsIbosEnvironmentNotifications 2 }
wsIbosVoltLow NOTIFICATION-TYPE
OBJECTS { wsVoltChannel, wsVoltMeasured, wsVoltThresholdLow, wsVoltStatus }
STATUS current
DESCRIPTION
"A wsIbosVoltLow trap signifies that the SNMP entity,
acting in an agent role, has detected that one of its
voltage channels is outside of the predefined low
threshold."
::= { wsIbosEnvironmentNotifications 3 }
wsIbosVoltHigh NOTIFICATION-TYPE
OBJECTS { wsVoltChannel, wsVoltMeasured, wsVoltThresholdHigh, wsVoltStatus }
STATUS current
DESCRIPTION
"A wsIbosVoltHigh trap signifies that the SNMP entity,
acting in an agent role, has detected that one of its
voltage channels is outside of the predefined high
threshold."
::= { wsIbosEnvironmentNotifications 4 }
wsIbosFanRPMLow NOTIFICATION-TYPE
OBJECTS { wsFanNumber, wsFanRPM }
STATUS current
DESCRIPTION
"A wsIbosFanRPMLow trap signifies that the SNMP entity,
acting in an agent role, has detected that one of its
fans's RPM is lower than the system defined threshold."
::= { wsIbosEnvironmentNotifications 5 }
wsIbosFanOutVoltLow NOTIFICATION-TYPE
OBJECTS { wsFanVoltage }
STATUS current
DESCRIPTION
"A wsIbosFanOutVoltLow trap signifies that the SNMP
entity, acting in an agent role, has detected that its
fan output voltage is lower than the system defined
threshold."
::= { wsIbosEnvironmentNotifications 6 }
END
Reference in New Issue View Git Blame Copy Permalink