901 lines
25 KiB
Plaintext
901 lines
25 KiB
Plaintext
-- $Id: ZYXEL-NWA-SERIES.mib,v 1.3 2008/01/14 11:20:00 LiKuang Tsai Exp $
|
|
-- ZyXEL Communications Corporation
|
|
-- Private Enterprise MIB definition
|
|
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
|
|
-- It includes object identifiers and object definitions for the ZyXEL
|
|
-- Enterprise MIB only, and should be used for compilation by a management
|
|
-- tool in order to extend the tool to support the ZyXEL MIB.
|
|
|
|
ZYXEL-NWA-SERIES_v1-4-2 DEFINITIONS ::=BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, NetworkAddress, PhysAddress, IpAddress, Counter
|
|
FROM RFC1155-SMI
|
|
RowStatus, RowPointer, DateAndTime, TruthValue
|
|
FROM SNMPv2-TC
|
|
OBJECT-TYPE, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
ifIndex FROM RFC1213-MIB;
|
|
|
|
|
|
DisplayString ::= OCTET STRING
|
|
|
|
-- tree structure
|
|
|
|
zyxel OBJECT IDENTIFIER ::= { enterprises 890 }
|
|
|
|
products OBJECT IDENTIFIER ::= { zyxel 1 }
|
|
|
|
proWireless OBJECT IDENTIFIER ::= { products 9 }
|
|
|
|
pwCommon OBJECT IDENTIFIER ::= { proWireless 1 }
|
|
pwTraps OBJECT IDENTIFIER ::= { proWireless 2 }
|
|
pwStations OBJECT IDENTIFIER ::= { proWireless 3 }
|
|
pwRogueAPDetect OBJECT IDENTIFIER ::= { proWireless 4 }
|
|
pwWlanControl OBJECT IDENTIFIER ::= { proWireless 5 }
|
|
pwWlanStatistics OBJECT IDENTIFIER ::= { proWireless 6 }
|
|
|
|
nwaSeries OBJECT IDENTIFIER ::= { proWireless 100 }
|
|
nwa3100 OBJECT IDENTIFIER ::= { nwaSeries 1 }
|
|
nwa3500 OBJECT IDENTIFIER ::= { nwaSeries 2 }
|
|
nwa3160 OBJECT IDENTIFIER ::= { nwaSeries 3 }
|
|
nwa3163 OBJECT IDENTIFIER ::= { nwaSeries 4 }
|
|
nwa3550 OBJECT IDENTIFIER ::= { nwaSeries 5 }
|
|
nwa3165 OBJECT IDENTIFIER ::= { nwaSeries 6 }
|
|
nwa1100 OBJECT IDENTIFIER ::= { nwaSeries 7 }
|
|
nwa3166 OBJECT IDENTIFIER ::= { nwaSeries 8 }
|
|
|
|
-- Node: ZyXEL
|
|
-- Node: Products
|
|
-- Node: proWireless
|
|
-- Node: pwCommon This group contains information dealing
|
|
-- wish the overall proWireless system, such as
|
|
-- software versions, software and configuration download...etc.
|
|
|
|
pwSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current software version."
|
|
::= { pwCommon 1 }
|
|
|
|
pwCfgVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current WLAN configuration version."
|
|
::= { pwCommon 2 }
|
|
|
|
pwTftpServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TFTP download server IP Address."
|
|
::= { pwCommon 3 }
|
|
|
|
pwTftpFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TFTP file name in TFTP server."
|
|
::= { pwCommon 4 }
|
|
|
|
pwTftpFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
software(1),
|
|
romfile(2),
|
|
textconfig(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"File type in TFTP server."
|
|
::= { pwCommon 5 }
|
|
|
|
pwTftpOpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(0),
|
|
inprogress(1),
|
|
failed(2)
|
|
success(3),
|
|
timeout(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TFTP Operation Status."
|
|
::= { pwCommon 6 }
|
|
|
|
pwTftpOpCommand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upload(1),
|
|
download(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TFTP Operation Command."
|
|
::= { pwCommon 7 }
|
|
|
|
pwSystemReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(0),
|
|
reboot(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"System Reboot."
|
|
::= { pwCommon 8 }
|
|
|
|
pwAutoCfgMessage OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last error massage of Auto Configuration process."
|
|
|
|
::= { pwCommon 9 }
|
|
|
|
pwCPUUsage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the CPU usage information"
|
|
::= { pwCommon 10 }
|
|
|
|
pwMemoryUsage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the memory usage information"
|
|
::= { pwCommon 11 }
|
|
|
|
pwSystemCountry OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The country of wlan"
|
|
::= { pwCommon 13 }
|
|
|
|
pwPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Change system password."
|
|
::= { pwCommon 14 }
|
|
--
|
|
-- The following table represent the associated station list
|
|
--
|
|
|
|
pwStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the associated stations."
|
|
::= { pwStations 2 }
|
|
|
|
pwStationEntry OBJECT-TYPE
|
|
SYNTAX PwStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing the station information."
|
|
INDEX { pwStationIndex }
|
|
::= { pwStationTable 1 }
|
|
|
|
PwStationEntry ::= SEQUENCE {
|
|
pwStationIndex Integer32,
|
|
-- docsDevNmAccessIp IpAddress,
|
|
-- docsDevNmAccessIpMask IpAddress,
|
|
pwStationMacAddress OCTET STRING,
|
|
pwStationAssociateTime DateAndTime,
|
|
pwStationSSID OCTET STRING,
|
|
pwStationStatus RowStatus
|
|
}
|
|
|
|
pwStationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of stations."
|
|
::= { pwStationEntry 1 }
|
|
|
|
pwStationMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Addresss of the station."
|
|
DEFVAL { "public" }
|
|
::= { pwStationEntry 2 }
|
|
|
|
pwStationAssociateTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The associated time of the station."
|
|
::= { pwStationEntry 3 }
|
|
|
|
pwStationSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The associated ssid."
|
|
::= { pwStationEntry 4 }
|
|
|
|
pwStationStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls and reflects the status of rows in this
|
|
the row is active."
|
|
::= { pwStationEntry 5 }
|
|
|
|
|
|
--
|
|
-- Node: pwRogueAPDetect This group defines the neighbor AP detection
|
|
--
|
|
|
|
--pwRogueAPDetectInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- disable(0)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "AP Detection Interval, time unit is minute.
|
|
-- The range is 10-60 minutes."
|
|
-- ::= { pwRogueAPDetect 1 }
|
|
|
|
pwRogueAPPeriodTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwRogueAPPeriodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the rogue AP Period Detection."
|
|
::= { pwRogueAPDetect 1 }
|
|
|
|
pwRogueAPPeriodEntry OBJECT-TYPE
|
|
SYNTAX PwRogueAPPeriodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing the control for rogue AP Period Detection."
|
|
INDEX { ifIndex }
|
|
::= { pwRogueAPPeriodTable 1 }
|
|
|
|
PwRogueAPPeriodEntry ::= SEQUENCE {
|
|
pwRogueAPPeriodDetection INTEGER,
|
|
pwRogueAPPeriod INTEGER,
|
|
pwRogueAPExpirationTime INTEGER
|
|
}
|
|
|
|
pwRogueAPPeriodDetection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control rogue AP Period Detection. enable(1) or disable(0)."
|
|
::= { pwRogueAPPeriodEntry 1 }
|
|
|
|
pwRogueAPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue AP period time. 10~60(min)."
|
|
::= { pwRogueAPPeriodEntry 2 }
|
|
|
|
pwRogueAPExpirationTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue AP Expiration time. 30~180(min)."
|
|
::= { pwRogueAPPeriodEntry 3 }
|
|
|
|
pwRogueAPDetectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwRogueAPDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the neighbor AP."
|
|
::= { pwRogueAPDetect 2 }
|
|
|
|
pwRogueAPDetectEntry OBJECT-TYPE
|
|
SYNTAX PwRogueAPDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing the neighbor AP information."
|
|
INDEX { pwRogueAPIndex }
|
|
::= { pwRogueAPDetectTable 1 }
|
|
|
|
PwRogueAPDetectEntry ::= SEQUENCE {
|
|
pwRogueAPIndex INTEGER,
|
|
pwRogueAPSSID OCTET STRING,
|
|
pwRogueAPMacAddress OCTET STRING,
|
|
pwRogueAPChannel OCTET STRING,
|
|
-- pwRogueAPDetectSignal Integer32,
|
|
-- pwRogueAPDetectNetwork INTEGER,
|
|
pwRogueAPSecurity OCTET STRING,
|
|
pwRogueAPSignal OCTET STRING
|
|
}
|
|
|
|
pwRogueAPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of neighbor AP table."
|
|
::= { pwRogueAPDetectEntry 1 }
|
|
|
|
pwRogueAPSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID. If SSID of the AP is hidden, it will be displayed as '(Hidden SSID)'."
|
|
::= { pwRogueAPDetectEntry 2 }
|
|
|
|
pwRogueAPMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address."
|
|
::= { pwRogueAPDetectEntry 3 }
|
|
|
|
pwRogueAPChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency channel ID."
|
|
::= { pwRogueAPDetectEntry 4 }
|
|
|
|
pwRogueAPSecurity OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data security mode."
|
|
::= { pwRogueAPDetectEntry 5 }
|
|
|
|
pwRogueAPSignal OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data signal."
|
|
::= { pwRogueAPDetectEntry 6 }
|
|
|
|
pwFriendlyAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwFriendlyAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the neighbor Friendly AP."
|
|
::= { pwRogueAPDetect 3 }
|
|
|
|
pwFriendlyAPEntry OBJECT-TYPE
|
|
SYNTAX PwFriendlyAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing the neighbor Friendly AP information."
|
|
INDEX { pwFriendlyAPIndex }
|
|
::= { pwFriendlyAPTable 1 }
|
|
|
|
PwFriendlyAPEntry ::= SEQUENCE {
|
|
pwFriendlyAPIndex INTEGER,
|
|
pwFriendlyAPSSID OCTET STRING,
|
|
pwFriendlyAPMacAddress OCTET STRING,
|
|
pwFriendlyAPChannel OCTET STRING,
|
|
pwFriendlyAPSecurity OCTET STRING,
|
|
pwFriendlyAPSignal OCTET STRING,
|
|
pwFriendlyAPDescription OCTET STRING
|
|
}
|
|
|
|
pwFriendlyAPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of neighbor friendly AP table."
|
|
::= { pwFriendlyAPEntry 1 }
|
|
|
|
pwFriendlyAPSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID. If SSID of the friendly AP is hidden, it will be displayed as '(Hidden SSID)'."
|
|
::= { pwFriendlyAPEntry 2 }
|
|
|
|
pwFriendlyAPMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The friendly AP MAC address. When setting this item,
|
|
a new entry of frienly AP will be added."
|
|
::= { pwFriendlyAPEntry 3 }
|
|
|
|
pwFriendlyAPChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency channel ID."
|
|
::= { pwFriendlyAPEntry 4 }
|
|
|
|
pwFriendlyAPSecurity OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data security mode."
|
|
::= { pwFriendlyAPEntry 5 }
|
|
|
|
pwFriendlyAPSignal OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data signal."
|
|
::= { pwFriendlyAPEntry 6 }
|
|
|
|
pwFriendlyAPDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of friendly AP. When setting this item,
|
|
the description field of relative entry will be updated"
|
|
::= { pwFriendlyAPEntry 7 }
|
|
|
|
|
|
--
|
|
-- Node: pwMacFilter This group defines the MAC Filter
|
|
--
|
|
pwWlanControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwWlanControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists WLAN control information. Use chipIndex as the index of each entry"
|
|
::= { pwWlanControl 1 }
|
|
|
|
pwWlanControlEntry OBJECT-TYPE
|
|
SYNTAX PwWlanControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing WLAN control information for each chip."
|
|
INDEX { ifIndex }
|
|
::= { pwWlanControlTable 1 }
|
|
|
|
PwWlanControlEntry ::= SEQUENCE {
|
|
pwWlanMode INTEGER,
|
|
pwWlanSupportedChannel OCTET STRING,
|
|
pwWlanChannel INTEGER,
|
|
pwWlanTxPower INTEGER,
|
|
pwAutoChannelSelection INTEGER,
|
|
pwCurrentChannel INTEGER,
|
|
pwStationCount Counter32,
|
|
pwWlanSupportedMode OCTET STRING
|
|
}
|
|
|
|
pwWlanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mode_802_11b(1),
|
|
mode_802_11g(2),
|
|
mode_802_11bg(3),
|
|
mode_802_11a(4),
|
|
mode_802_11ng(6),
|
|
mode_802_11na(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of wlan right now."
|
|
::= { pwWlanControlEntry 1 }
|
|
|
|
pwWlanSupportedChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The all channel supported by wlan"
|
|
::= { pwWlanControlEntry 3 }
|
|
|
|
pwWlanChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
channel-01_2412mhz(1),
|
|
channel-02_2417mhz(2),
|
|
channel-03_2422mhz(3),
|
|
channel-04_2427mhz(4),
|
|
channel-05_2432mhz(5),
|
|
channel-06_2437mhz(6),
|
|
channel-07_2442mhz(7),
|
|
channel-08_2447mhz(8),
|
|
channel-09_2452mhz(9),
|
|
channel-10_2457mhz(10),
|
|
channel-11_2462mhz(11),
|
|
channel-12_2467mhz(12),
|
|
channel-13_2472mhz(13),
|
|
|
|
channel-36_5180mhz(36),
|
|
channel-40_5200mhz(40),
|
|
channel-44_5220mhz(44),
|
|
channel-48_5240mhz(48),
|
|
channel-52_5260mhz(52),
|
|
channel-56_5280mhz(56),
|
|
channel-60_5300mhz(60),
|
|
channel-64_5320mhz(64),
|
|
channel-100_5500mhz(100),
|
|
channel-104_5520mhz(104),
|
|
channel-108_5540mhz(108),
|
|
channel-112_5560mhz(112),
|
|
channel-116_5580mhz(116),
|
|
channel-120_5600mhz(120),
|
|
channel-124_5620mhz(124),
|
|
channel-128_5640mhz(128),
|
|
channel-132_5660mhz(132),
|
|
channel-136_5680mhz(136),
|
|
channel-140_5700mhz(140),
|
|
channel-149_5745mhz(149),
|
|
channel-153_5765mhz(153),
|
|
channel-157_5785mhz(157),
|
|
channel-161_5805mhz(161),
|
|
channel-165_5825mhz(165)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current channel of wlan right now. When setting this
|
|
parameter, the value should be a subset of all supported channel"
|
|
::= { pwWlanControlEntry 4 }
|
|
|
|
pwWlanTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
half(2),
|
|
quarter(4),
|
|
eighth(8),
|
|
minimum(16)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To specify the RF transmission power."
|
|
::= { pwWlanControlEntry 5 }
|
|
|
|
pwAutoChannelSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enble(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable Auto Channel Selection."
|
|
::= { pwWlanControlEntry 6 }
|
|
|
|
pwCurrentChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
device_is_disable(0),
|
|
channel-01_2412mhz(1),
|
|
channel-02_2417mhz(2),
|
|
channel-03_2422mhz(3),
|
|
channel-04_2427mhz(4),
|
|
channel-05_2432mhz(5),
|
|
channel-06_2437mhz(6),
|
|
channel-07_2442mhz(7),
|
|
channel-08_2447mhz(8),
|
|
channel-09_2452mhz(9),
|
|
channel-10_2457mhz(10),
|
|
channel-11_2462mhz(11),
|
|
channel-12_2467mhz(12),
|
|
channel-13_2472mhz(13),
|
|
|
|
channel-36_5180mhz(36),
|
|
channel-40_5200mhz(40),
|
|
channel-44_5220mhz(44),
|
|
channel-48_5240mhz(48),
|
|
channel-52_5260mhz(52),
|
|
channel-56_5280mhz(56),
|
|
channel-60_5300mhz(60),
|
|
channel-64_5320mhz(64),
|
|
channel-100_5500mhz(100),
|
|
channel-104_5520mhz(104),
|
|
channel-108_5540mhz(108),
|
|
channel-112_5560mhz(112),
|
|
channel-116_5580mhz(116),
|
|
channel-120_5600mhz(120),
|
|
channel-124_5620mhz(124),
|
|
channel-128_5640mhz(128),
|
|
channel-132_5660mhz(132),
|
|
channel-136_5680mhz(136),
|
|
channel-140_5700mhz(140),
|
|
channel-149_5745mhz(149),
|
|
channel-153_5765mhz(153),
|
|
channel-157_5785mhz(157),
|
|
channel-161_5805mhz(161),
|
|
channel-165_5825mhz(165)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Operating channel."
|
|
::= { pwWlanControlEntry 7 }
|
|
|
|
pwStationCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ssocited stations"
|
|
::= { pwWlanControlEntry 8 }
|
|
|
|
pwWlanSupportedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The all mode supported by wlan"
|
|
::= { pwWlanControlEntry 9 }
|
|
|
|
--
|
|
-- Node: pwWlanStatistics Copy from dot11CountersTable
|
|
--
|
|
|
|
pwWlanStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwWlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists WLAN statistics information. Use chipIndex as the index of each entry"
|
|
::= { pwWlanStatistics 1 }
|
|
|
|
pwWlanStatisticsEntry OBJECT-TYPE
|
|
SYNTAX PwWlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing WLAN statistics information."
|
|
INDEX { ifIndex }
|
|
::= { pwWlanStatisticsTable 1 }
|
|
|
|
PwWlanStatisticsEntry ::= SEQUENCE {
|
|
pwDot11FailedCount Counter32,
|
|
pwDot11RetryCount Counter32,
|
|
pwDot11ACKFailureCount Counter32,
|
|
pwDot11ReceivedFragmentCount Counter32,
|
|
pwDot11TransmittedFrameCount Counter32,
|
|
pwDot11ReceivedPktCount Counter32,
|
|
pwDot11TransmittedPktCount Counter32,
|
|
pwDot11ReceptionRate Counter32,
|
|
pwDot11TransmissionRate Counter32
|
|
}
|
|
|
|
pwDot11FailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an MSDU is not transmitted
|
|
successfully due to the number of transmit attempts exceeding
|
|
either the dot11ShortRetryLimit or dot11LongRetryLimit. "
|
|
|
|
::= { pwWlanStatisticsEntry 1 }
|
|
|
|
pwDot11RetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an MSDU is successfully
|
|
transmitted after one or more retransmissions."
|
|
::= { pwWlanStatisticsEntry 2 }
|
|
|
|
pwDot11ACKFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment when an ACK is not received
|
|
when expected."
|
|
|
|
::= { pwWlanStatisticsEntry 3 }
|
|
|
|
pwDot11ReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall be incremented for each successfully
|
|
received MPDU of type Data or Management."
|
|
|
|
::= { pwWlanStatisticsEntry 4 }
|
|
|
|
pwDot11TransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This counter shall increment for each successfully transmitted MSDU."
|
|
|
|
::= { pwWlanStatisticsEntry 5 }
|
|
|
|
pwDot11ReceivedPktCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment for each successfully received packets every five minutes."
|
|
|
|
::= { pwWlanStatisticsEntry 6 }
|
|
|
|
pwDot11TransmittedPktCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment for each successfully transmitted packets every five minutes."
|
|
|
|
::= { pwWlanStatisticsEntry 7 }
|
|
|
|
pwDot11ReceptionRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reception Rate in Byte per second."
|
|
|
|
::= { pwWlanStatisticsEntry 8 }
|
|
|
|
pwDot11TransmissionRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmission Rate in Byte per second."
|
|
|
|
::= { pwWlanStatisticsEntry 9 }
|
|
|
|
|
|
-- Node: pwTraps This group defines information of pro wireless product
|
|
-- specific snmpv2 notifications.
|
|
-- Including control variables to enable / disable
|
|
-- sending trap.
|
|
|
|
pwTrapControl OBJECT IDENTIFIER ::= { pwTraps 1 }
|
|
pwTrapVariables OBJECT IDENTIFIER ::= { pwTraps 2 }
|
|
pwTrapTypes OBJECT IDENTIFIER ::= { pwTraps 3 }
|
|
|
|
pwWirelessTraps OBJECT IDENTIFIER ::= { pwTrapTypes 1 }
|
|
pwSecurityTraps OBJECT IDENTIFIER ::= { pwTrapTypes 2 }
|
|
pwTFTPTraps OBJECT IDENTIFIER ::= { pwTrapTypes 3 }
|
|
|
|
-- Control
|
|
pwTrapWirelessStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls wireless group traps enable or disable."
|
|
::= { pwTrapControl 1 }
|
|
|
|
pwTrapSecurityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls security group traps enable or disable."
|
|
::= { pwTrapControl 2 }
|
|
|
|
pwTrapTFTPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls TFTP group traps enable or disable."
|
|
::= { pwTrapControl 3 }
|
|
|
|
|
|
-- Trap variables
|
|
pwTrapGenericMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide generic information on traps."
|
|
::= { pwTrapVariables 1 }
|
|
|
|
pwTrapMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents MAC address of the device or the host
|
|
which triggers the trap."
|
|
::= { pwTrapVariables 2 }
|
|
|
|
pwTrapWlanSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID name which the wireless client associates."
|
|
::= { pwTrapVariables 3 }
|
|
|
|
-- Wireless Traps
|
|
-- Assocication, Disassociation
|
|
pwWlanStaAssociation NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless client assocication notification."
|
|
::= { pwWirelessTraps 1 }
|
|
|
|
pwWlanStaDisassociation NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless client disassocication notification."
|
|
::= { pwWirelessTraps 2 }
|
|
|
|
-- Security Traps
|
|
-- Client authenticate failed
|
|
|
|
pwWlanStaAuthFail NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless client authentication failed."
|
|
::= { pwSecurityTraps 1 }
|
|
|
|
-- TFTP Traps
|
|
-- Status
|
|
|
|
pwTFTPStatus NOTIFICATION-TYPE
|
|
OBJECTS {pwTrapGenericMessage, pwTftpOpStatus, pwTftpServer,
|
|
pwTftpFileName, pwTftpFileType, pwTftpOpCommand }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send when TFTP operation completed, or stopped due to some reason.
|
|
For example, timeout or wrong configuration."
|
|
::= { pwTFTPTraps 1 }
|
|
END
|