Initial commitHEADmain

1 files changed, 714 insertions, 0 deletions

diff --git a/MIBS/ATM-TC-MIB b/MIBS/ATM-TC-MIB
new file mode 100644
index 0000000..c76f68e
--- /dev/null
+++ b/MIBS/ATM-TC-MIB
@@ -0,0 +1,714 @@
+
+     ATM-TC-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+        MODULE-IDENTITY, OBJECT-IDENTITY,
+        TimeTicks, mib-2
+            FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION
+            FROM SNMPv2-TC;
+
+
+     atmTCMIB MODULE-IDENTITY
+          LAST-UPDATED "9810190200Z"
+          ORGANIZATION "IETF AToMMIB Working Group"
+          CONTACT-INFO
+            "          Michael Noto
+              Postal:  3Com Corporation
+                       5400 Bayfront Plaza, M/S 3109
+                       Santa Clara, CA 95052
+                       USA
+              Tel:     +1 408 326 2218
+              E-mail:  mike_noto@3com.com
+
+                       Ethan Mickey Spiegel
+              Postal:  Cisco Systems
+                       170 W. Tasman Dr.
+                       San Jose, CA 95134
+                       USA
+              Tel:     +1 408 526 6408
+              E-mail:  mspiegel@cisco.com
+
+                       Kaj Tesink
+              Postal:  Bellcore
+                       331 Newman Springs Road
+                       Red Bank, NJ 07701
+                       USA
+              Tel:     +1 732 758 5254
+              Fax:     +1 732 758 4177
+              E-mail:  kaj@bellcore.com"
+          DESCRIPTION
+           "This MIB Module provides Textual Conventions
+           and OBJECT-IDENTITY Objects to be used by
+           ATM systems."
+          ::= { mib-2 37 3 } -- atmMIB 3 (see [3])
+
+     -- The Textual Conventions defined below are organized
+     -- alphabetically
+
+
+     AtmAddr ::= TEXTUAL-CONVENTION
+             DISPLAY-HINT "1x"
+             STATUS  current
+             DESCRIPTION
+                 "An ATM address. The semantics are implied by
+                 the length. The address types are: - no
+                 address (0 octets) - E.164 (8 octets) - NSAP
+                 (20 octets) In addition, when subaddresses
+                 are used the AtmAddr may represent the
+                 concatenation of address and subaddress. The
+                 associated address types are: - E.164, E.164
+                 (16 octets) - E.164, NSAP (28 octets) - NSAP,
+                 NSAP (40 octets) Address lengths other than
+                 defined in this definition imply address
+                 types defined elsewhere.  Note: The E.164
+                 address is encoded in BCD format."
+            SYNTAX   OCTET STRING (SIZE(0..40))
+
+
+    AtmConnCastType ::= TEXTUAL-CONVENTION
+            STATUS  current
+            DESCRIPTION
+              "The type of topology of a connection (point-
+              to-point, point-to-multipoint). In the case
+              of point-to-multipoint, the orientation of
+              this VPL or VCL in the connection.
+              On a host:
+              - p2mpRoot indicates that the host
+                is the root of the p2mp connection.
+              - p2mpLeaf indicates that the host
+                is a leaf of the p2mp connection.
+              On a switch interface:
+              - p2mpRoot indicates that cells received
+                by the switching fabric from the interface
+                are from the root of the p2mp connection.
+              - p2mpLeaf indicates that cells transmitted
+                to the interface from the switching fabric
+                are to the leaf of the p2mp connection."
+            SYNTAX   INTEGER {
+               p2p(1),
+               p2mpRoot(2),
+               p2mpLeaf(3)
+               }
+
+    AtmConnKind ::= TEXTUAL-CONVENTION
+            STATUS  current
+            DESCRIPTION
+                "The type of call control used for an ATM
+                connection at a particular interface. The use
+                is as follows:
+                   pvc(1)
+                      Virtual link of a PVC. Should not be
+                      used for an PVC/SVC (i.e., Soft PVC)
+                      crossconnect.
+                   svcIncoming(2)
+                      Virtual link established after a
+                      received signaling request to setup
+                      an SVC.
+                   svcOutgoing(3)
+                      Virtual link established after a
+                      transmitted or forwarded signaling
+                      request to setup an SVC.
+                   spvcInitiator(4)
+                      Virtual link at the PVC side of an
+                      SVC/PVC crossconnect, where the
+                      switch is the initiator of the Soft PVC
+                      setup.
+                   spvcTarget(5)
+                      Virtual link at the PVC side of an
+                      SVC/PVC crossconnect, where the
+                      switch is the target of the Soft PVC
+                      setup.
+
+                For PVCs, a pvc virtual link is always cross-
+                connected to a pvc virtual link.
+
+                For SVCs, an svcIncoming virtual link is always cross-
+                connected to an svcOutgoing virtual link.
+
+For Soft PVCs, an spvcInitiator is either cross-connected to
+an svcOutgoing or an spvcTarget, and an spvcTarget is either
+cross-connected to an svcIncoming or an spvcInitiator."
+        SYNTAX   INTEGER {
+           pvc(1),
+           svcIncoming(2),
+           svcOutgoing(3),
+           spvcInitiator(4),
+           spvcTarget(5)
+           }
+
+    AtmIlmiNetworkPrefix ::= TEXTUAL-CONVENTION
+        STATUS   current
+        DESCRIPTION
+            "A network prefix used for ILMI address
+            registration.  In the case of ATM endsystem
+            addresses (AESAs), the network prefix is the first
+            13 octets of the address which includes the AFI,
+            IDI, and HO-DSP fields.  In the case of native
+            E.164 addresses, the network prefix is the entire
+            E.164 address encoded in 8 octets, as if it were
+            an E.164 IDP in an ATM endsystem address
+            structure."
+        REFERENCE
+            "ATM Forum, Integrated Local Management Interface
+               (ILMI) Specification, Version 4.0,
+               af-ilmi-0065.000, September 1996, Section 9
+             ATM Forum, ATM User-Network Interface Signalling
+               Specification, Version 4.0 (UNI 4.0),
+               af-sig-0061.000, June 1996, Section 3"
+        SYNTAX   OCTET STRING (SIZE(8|13))
+
+AtmInterfaceType ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION
+            "The connection setup procedures used for the
+            identified interface.
+
+            Other: Connection setup procedures other than
+               those listed below.
+
+            Auto-configuration:
+               Indicates that the connection setup
+               procedures are to be determined dynamically,
+               or that determination has not yet been
+               completed. One such mechanism is via ATM
+               Forum ILMI auto-configuration procedures.
+
+            ITU-T DSS2:
+            -  ITU-T Recommendation Q.2931, Broadband
+               Integrated Service Digital Network (B-ISDN)
+               Digital Subscriber Signalling System No.2
+               (DSS2) User-Network Interface (UNI) Layer 3
+               Specification for Basic Call/Connection
+               Control (September 1994)
+            -  ITU-T Draft Recommendation Q.2961,
+               B-ISDN DSS 2 Support of Additional Traffic
+               Parameters (May 1995)
+
+            -  ITU-T Draft Recommendation Q.2971,
+               B-ISDN DSS 2 User Network Interface Layer 3
+               Specification for Point-to-multipoint
+               Call/connection Control (May 1995)
+
+            ATM Forum UNI 3.0:
+               ATM Forum, ATM User-Network Interface,
+               Version 3.0 (UNI 3.0) Specification,
+               (1994).
+
+            ATM Forum UNI 3.1:
+               ATM Forum, ATM User-Network Interface,
+               Version 3.1 (UNI 3.1) Specification,
+               (November 1994).
+
+            ATM Forum UNI Signalling 4.0:
+               ATM Forum, ATM User-Network Interface (UNI)
+               Signalling Specification Version 4.0,
+               af-sig-0061.000 (June 1996).
+
+            ATM Forum IISP (based on UNI 3.0 or UNI 3.1) :
+               Interim Inter-switch Signaling Protocol
+               (IISP) Specification, Version 1.0,
+               af-pnni-0026.000, (December 1994).
+
+            ATM Forum PNNI 1.0 :
+               ATM Forum, Private Network-Network Interface
+               Specification, Version 1.0, af-pnni-0055.000,
+               (March 1996).
+
+            ATM Forum B-ICI:
+               ATM Forum, B-ICI Specification, Version 2.0,
+               af-bici-0013.002, (November 1995).
+
+            ATM Forum UNI PVC Only:
+               An ATM Forum compliant UNI with the
+               signalling disabled.
+            ATM Forum NNI PVC Only:
+               An ATM Forum compliant NNI with the
+               signalling disabled."
+        SYNTAX  INTEGER  {
+                  other(1),
+                  autoConfig(2),
+                  ituDss2(3),
+                  atmfUni3Dot0(4),
+                  atmfUni3Dot1(5),
+                  atmfUni4Dot0(6),
+                  atmfIispUni3Dot0(7),
+                  atmfIispUni3Dot1(8),
+                  atmfIispUni4Dot0(9),
+        atmfPnni1Dot0(10),
+        atmfBici2Dot0(11),
+        atmfUniPvcOnly(12),
+        atmfNniPvcOnly(13)  }
+
+AtmServiceCategory ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The service category for a connection."
+        REFERENCE
+            "ATM Forum Traffic Management Specification,
+            Version 4.0, af-tm-0056.000, June 1996."
+        SYNTAX   INTEGER {
+           other(1),   -- none of the following
+           cbr(2),     -- constant bit rate
+           rtVbr(3),   -- real-time variable bit rate
+           nrtVbr(4),  -- non real-time variable bit rate
+           abr(5),     -- available bit rate
+           ubr(6)      -- unspecified bit rate
+           }
+
+AtmSigDescrParamIndex ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of this object identifies a row in the
+            atmSigDescrParamTable. The value 0 signifies that
+            none of the signalling parameters defined in the
+            atmSigDescrParamTable are applicable."
+        SYNTAX  INTEGER (0..2147483647)
+
+AtmTrafficDescrParamIndex ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of this object identifies a row in the
+            atmTrafficDescrParamTable.  The value 0 signifies
+            that no row has been identified."
+        SYNTAX  INTEGER (0..2147483647)
+
+AtmVcIdentifier ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The VCI value for a VCL. The maximum VCI value
+            cannot exceed the value allowable by
+            atmInterfaceMaxVciBits defined in ATM-MIB."
+        SYNTAX   INTEGER (0..65535)
+
+AtmVpIdentifier ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The VPI value for a VPL or VCL. The value VPI=0
+            is only allowed for a VCL. For ATM UNIs supporting
+            VPCs the VPI value ranges from 0 to 255.  The VPI
+            value 0 is supported for ATM UNIs conforming to
+            the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs)
+            specification. For ATM UNIs supporting VCCs the
+            VPI value ranges from 0 to 255.  For ATM NNIs the
+            VPI value ranges from 0 to 4095.  The maximum VPI
+            value cannot exceed the value allowable by
+            atmInterfaceMaxVpiBits defined in ATM-MIB."
+        SYNTAX    INTEGER (0..4095)
+
+AtmVorXAdminStatus ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value determines the desired administrative
+            status of a virtual link or cross-connect. The up
+            and down states indicate that the traffic flow is
+            enabled or disabled respectively on the virtual
+            link or cross-connect."
+        SYNTAX   INTEGER {
+           up(1),
+           down(2)
+            }
+
+AtmVorXLastChange ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of MIB II's sysUpTime at the time a
+            virtual link or cross-connect entered its current
+            operational state. If the current state was
+            entered prior to the last re-initialization of the
+            agent then this object contains a zero value."
+        SYNTAX   TimeTicks
+
+AtmVorXOperStatus ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value determines the operational status of a
+            virtual link or cross-connect. The up and down
+            states indicate that the traffic flow is enabled
+            or disabled respectively on the virtual link or
+            cross-connect. The unknown state indicates that
+            the state of it cannot be determined. The state
+            will be down or unknown if the supporting ATM
+            interface(s) is down or unknown respectively."
+        SYNTAX   INTEGER {
+           up(1),
+           down(2),
+           unknown(3)
+           }
+
+
+
+
+-- OBJECT-IDENTITIES:
+
+-- The following atmTrafficDescriptorTypes has been moved
+-- from RFC1695 and no longer appear in the revision of
+-- RFC1695[3].
+
+atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {mib-2 37 1 1}
+                                            -- atmMIBObjects
+                                            -- See [3].
+
+-- All other and new OBJECT IDENTITIES
+-- are defined under the following subtree:
+
+    atmObjectIdentities OBJECT IDENTIFIER ::= {atmTCMIB 1}
+
+-- The following values are defined for use as
+-- possible values of the ATM traffic descriptor type.
+
+atmNoTrafficDescriptor  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This identifies the no ATM traffic
+        descriptor type.  Parameters 1, 2, 3, 4,
+        and 5 are not used.  This traffic descriptor
+        type can be used for best effort traffic."
+    ::= {atmTrafficDescriptorTypes 1}
+
+atmNoClpNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        and no Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: not used
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 2}
+
+atmClpNoTaggingNoScr  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This traffic descriptor is for CLP without
+        tagging and no Sustained Cell Rate.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: peak cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    ::= {atmTrafficDescriptorTypes 3}
+
+atmClpTaggingNoScr  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This traffic descriptor is for CLP with
+        tagging and no Sustained Cell Rate.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: peak cell rate in cells/second
+                     for CLP=0 traffic, excess
+                     tagged as CLP=1
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    ::= {atmTrafficDescriptorTypes 4}
+
+atmNoClpScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 5}
+
+atmClpNoTaggingScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Sustained Cell Rate and no tagging.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 6}
+
+atmClpTaggingScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        tagging and Sustained Cell Rate.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic, excess tagged as
+                     CLP=1
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 7}
+
+atmClpNoTaggingMcr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Minimum Cell Rate and no tagging.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: minimum cell rate in cells/second
+        Parameter 4: unused
+        Parameter 5: unused."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 8}
+
+atmClpTransparentNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for the CLP-
+        transparent model and no Sustained Cell Rate.
+        The use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the CBR.1 conformance
+        definition.
+
+        Connections specifying this traffic descriptor
+        type will be rejected at UNI 3.0 or UNI 3.1
+        interfaces.  For a similar traffic descriptor
+        type that can be accepted at UNI 3.0 and
+        UNI 3.1 interfaces, see atmNoClpNoScr."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 9}
+
+atmClpTransparentScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for the CLP-
+        transparent model with Sustained Cell Rate.
+        The use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.1 conformance
+        definition.
+
+        Connections specifying this traffic descriptor
+        type will be rejected at UNI 3.0 or UNI 3.1
+        interfaces.  For a similar traffic descriptor
+        type that can be accepted at UNI 3.0 and
+        UNI 3.1 interfaces, see atmNoClpScr."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 10}
+
+atmNoClpTaggingNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with tagging and no Sustained Cell Rate.  The
+        use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the UBR.2 conformance
+        definition ."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 11}
+
+atmNoClpNoScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        and no Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        CBR connections following the UNI 3.0/3.1
+        conformance definition for PCR CLP=0+1.
+        These CBR connections differ from CBR.1
+        connections in that the CLR objective
+        applies only to the CLP=0 cell flow.
+
+        This traffic descriptor type is also
+        applicable to connections following the UBR.1
+        conformance definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 12}
+
+atmNoClpScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable
+        to VBR connections following the UNI 3.0/3.1
+        conformance definition for PCR CLP=0+1 and
+        SCR CLP=0+1.  These VBR connections
+        differ from VBR.1 connections in that
+        the CLR objective applies only to the CLP=0
+        cell flow."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 13}
+
+atmClpNoTaggingScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Sustained Cell Rate and no tagging.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.2 conformance
+        definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 14}
+
+atmClpTaggingScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        tagging and Sustained Cell Rate.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic, excess tagged as
+                     CLP=1
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.3 conformance
+        definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 15}
+
+END