diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/MPLS-TE-STD-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/MPLS-TE-STD-MIB')
| -rw-r--r-- | MIBS/MPLS-TE-STD-MIB | 2518 |
1 files changed, 2518 insertions, 0 deletions
diff --git a/MIBS/MPLS-TE-STD-MIB b/MIBS/MPLS-TE-STD-MIB new file mode 100644 index 0000000..c666cd7 --- /dev/null +++ b/MIBS/MPLS-TE-STD-MIB @@ -0,0 +1,2518 @@ +-- extracted from rfc3812.txt +-- at Thu Jun 17 06:20:52 2004 + + MPLS-TE-STD-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, Counter64, TimeTicks, + zeroDotZero + FROM SNMPv2-SMI -- [RFC2578] + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF -- [RFC2580] + TruthValue, RowStatus, RowPointer, StorageType, + TimeStamp + FROM SNMPv2-TC -- [RFC2579] + InterfaceIndexOrZero, ifGeneralInformationGroup, + ifCounterDiscontinuityGroup + FROM IF-MIB -- [RFC2863] + mplsStdMIB, MplsBitRate, MplsBurstSize, MplsLSPID, + MplsTunnelIndex, MplsTunnelInstanceIndex, + MplsTunnelAffinity, MplsExtendedTunnelId, MplsPathIndex, + MplsPathIndexOrZero, MplsOwner, TeHopAddressType, + TeHopAddress, TeHopAddressAS, TeHopAddressUnnum + FROM MPLS-TC-STD-MIB -- [RFC3811] + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB -- [RFC3411] + IndexIntegerNextFree + FROM DIFFSERV-MIB -- [RFC3289] + InetAddressPrefixLength + FROM INET-ADDRESS-MIB -- [RFC3291] + ; + + mplsTeStdMIB MODULE-IDENTITY + LAST-UPDATED + "200406030000Z" -- June 3, 2004 + ORGANIZATION + "Multiprotocol Label Switching (MPLS) Working Group" + CONTACT-INFO + " Cheenu Srinivasan + Bloomberg L.P. + Email: cheenu@bloomberg.net + + Arun Viswanathan + Force10 Networks, Inc. + Email: arunv@force10networks.com + + Thomas D. Nadeau + Cisco Systems, Inc. + Email: tnadeau@cisco.com + + Comments about this document should be emailed + directly to the MPLS working group mailing list at + mpls@uu.net." + DESCRIPTION + "Copyright (C) The Internet Society (2004). The + initial version of this MIB module was published + in RFC 3812. For full legal notices see the RFC + itself or see: http://www.ietf.org/copyrights/ianamib.html + + This MIB module contains managed object definitions + for MPLS Traffic Engineering (TE) as defined in: + 1. Extensions to RSVP for LSP Tunnels, Awduche et + al, RFC 3209, December 2001 + 2. Constraint-Based LSP Setup using LDP, Jamoussi + (Editor), RFC 3212, January 2002 + 3. Requirements for Traffic Engineering Over MPLS, + Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M., + and J. McManus, [RFC2702], September 1999" + + -- Revision history. + + REVISION + "200406030000Z" -- June 3, 2004 + DESCRIPTION + "Initial version issued as part of RFC 3812." + + ::= { mplsStdMIB 3 } + + -- Top level components of this MIB module. + + -- traps + mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeStdMIB 0 } + -- tables, scalars + mplsTeScalars OBJECT IDENTIFIER ::= { mplsTeStdMIB 1 } + mplsTeObjects OBJECT IDENTIFIER ::= { mplsTeStdMIB 2 } + -- conformance + mplsTeConformance OBJECT IDENTIFIER ::= { mplsTeStdMIB 3 } + + + -- MPLS Tunnel scalars. + + mplsTunnelConfigured OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of tunnels configured on this device. A + tunnel is considered configured if the + mplsTunnelRowStatus is active(1)." + ::= { mplsTeScalars 1 } + + mplsTunnelActive OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of tunnels active on this device. A + tunnel is considered active if the + mplsTunnelOperStatus is up(1)." + ::= { mplsTeScalars 2 } + + mplsTunnelTEDistProto OBJECT-TYPE + SYNTAX BITS { + other (0), + ospf (1), + isis (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The traffic engineering distribution protocol(s) + used by this LSR. Note that an LSR may support more + than one distribution protocol simultaneously." + ::= { mplsTeScalars 3 } + + mplsTunnelMaxHops OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of hops that can be specified for + a tunnel on this device." + ::= { mplsTeScalars 4 } + + mplsTunnelNotificationMaxRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable indicates the maximum number of + notifications issued per second. If events occur + more rapidly, the implementation may simply fail to + emit these notifications during that period, or may + queue them until an appropriate time. A value of 0 + means no throttling is applied and events may be + notified at the rate at which they occur." + DEFVAL { 0 } + ::= { mplsTeScalars 5 } + + -- End of MPLS Tunnel scalars. + + + -- MPLS tunnel table. + + mplsTunnelIndexNext OBJECT-TYPE + SYNTAX IndexIntegerNextFree (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an unused value for + mplsTunnelIndex, or a zero to indicate + that none exist. Negative values are not allowed, + as they do not correspond to valid values of + mplsTunnelIndex. + + Note that this object offers an unused value + for an mplsTunnelIndex value at the ingress + side of a tunnel. At other LSRs the value + of mplsTunnelIndex SHOULD be taken from the + value signaled by the MPLS signaling protocol. + " + ::= { mplsTeObjects 1 } + + mplsTunnelTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelTable allows new MPLS tunnels to be + created between an LSR and a remote endpoint, and + existing tunnels to be reconfigured or removed. + Note that only point-to-point tunnel segments are + supported, although multipoint-to-point and point- + to-multipoint connections are supported by an LSR + acting as a cross-connect. Each MPLS tunnel can + thus have one out-segment originating at this LSR + and/or one in-segment terminating at this LSR." + ::= { mplsTeObjects 2 } + + mplsTunnelEntry OBJECT-TYPE + SYNTAX MplsTunnelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents an MPLS tunnel. + An entry can be created by a network administrator + or by an SNMP agent as instructed by an MPLS + signalling protocol. Whenever a new entry is + created with mplsTunnelIsIf set to true(1), then a + corresponding entry is created in ifTable as well + (see RFC 2863). The ifType of this entry is + mplsTunnel(150). + + A tunnel entry needs to be uniquely identified across + a MPLS network. Indices mplsTunnelIndex and + mplsTunnelInstance uniquely identify a tunnel on + the LSR originating the tunnel. To uniquely + identify a tunnel across an MPLS network requires + index mplsTunnelIngressLSRId. The last index + mplsTunnelEgressLSRId is useful in identifying all + instances of a tunnel that terminate on the same + egress LSR." + REFERENCE + "1. RFC 2863 - The Interfaces Group MIB, McCloghrie, + K., and F. Kastenholtz, June 2000 " + INDEX { mplsTunnelIndex, + mplsTunnelInstance, + mplsTunnelIngressLSRId, + mplsTunnelEgressLSRId + } + ::= { mplsTunnelTable 1 } + + MplsTunnelEntry ::= SEQUENCE { + mplsTunnelIndex MplsTunnelIndex, + mplsTunnelInstance MplsTunnelInstanceIndex, + mplsTunnelIngressLSRId MplsExtendedTunnelId, + mplsTunnelEgressLSRId MplsExtendedTunnelId, + mplsTunnelName SnmpAdminString, + mplsTunnelDescr SnmpAdminString, + mplsTunnelIsIf TruthValue, + mplsTunnelIfIndex InterfaceIndexOrZero, + mplsTunnelOwner MplsOwner, + mplsTunnelRole INTEGER, + mplsTunnelXCPointer RowPointer, + mplsTunnelSignallingProto INTEGER, + mplsTunnelSetupPrio Integer32, + mplsTunnelHoldingPrio Integer32, + mplsTunnelSessionAttributes BITS, + mplsTunnelLocalProtectInUse TruthValue, + mplsTunnelResourcePointer RowPointer, + mplsTunnelPrimaryInstance MplsTunnelInstanceIndex, + mplsTunnelInstancePriority Unsigned32, + mplsTunnelHopTableIndex MplsPathIndexOrZero, + mplsTunnelPathInUse MplsPathIndexOrZero, + mplsTunnelARHopTableIndex MplsPathIndexOrZero, + mplsTunnelCHopTableIndex MplsPathIndexOrZero, + mplsTunnelIncludeAnyAffinity MplsTunnelAffinity, + mplsTunnelIncludeAllAffinity MplsTunnelAffinity, + mplsTunnelExcludeAnyAffinity MplsTunnelAffinity, + mplsTunnelTotalUpTime TimeTicks, + mplsTunnelInstanceUpTime TimeTicks, + mplsTunnelPrimaryUpTime TimeTicks, + mplsTunnelPathChanges Counter32, + mplsTunnelLastPathChange TimeTicks, + mplsTunnelCreationTime TimeStamp, + mplsTunnelStateTransitions Counter32, + mplsTunnelAdminStatus INTEGER, + mplsTunnelOperStatus INTEGER, + mplsTunnelRowStatus RowStatus, + mplsTunnelStorageType StorageType + } + + mplsTunnelIndex OBJECT-TYPE + SYNTAX MplsTunnelIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Uniquely identifies a set of tunnel instances + between a pair of ingress and egress LSRs. + Managers should obtain new values for row + creation in this table by reading + mplsTunnelIndexNext. When + the MPLS signalling protocol is rsvp(2) this value + SHOULD be equal to the value signaled in the + Tunnel Id of the Session object. When the MPLS + signalling protocol is crldp(3) this value + SHOULD be equal to the value signaled in the + LSP ID." + ::= { mplsTunnelEntry 1 } + + mplsTunnelInstance OBJECT-TYPE + SYNTAX MplsTunnelInstanceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Uniquely identifies a particular instance of a + tunnel between a pair of ingress and egress LSRs. + It is useful to identify multiple instances of + tunnels for the purposes of backup and parallel + tunnels. When the MPLS signaling protocol is + rsvp(2) this value SHOULD be equal to the LSP Id + of the Sender Template object. When the signaling + protocol is crldp(3) there is no equivalent + signaling object." + ::= { mplsTunnelEntry 2 } + + mplsTunnelIngressLSRId OBJECT-TYPE + SYNTAX MplsExtendedTunnelId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identity of the ingress LSR associated with this + tunnel instance. When the MPLS signalling protocol + is rsvp(2) this value SHOULD be equal to the Tunnel + Sender Address in the Sender Template object and MAY + be equal to the Extended Tunnel Id field in the + SESSION object. When the MPLS signalling protocol is + crldp(3) this value SHOULD be equal to the Ingress + LSR Router ID field in the LSPID TLV object." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001 + 2. Constraint-Based LSP Setup using LDP, Jamoussi + (Editor), RFC 3212, January 2002" + ::= { mplsTunnelEntry 3 } + + mplsTunnelEgressLSRId OBJECT-TYPE + SYNTAX MplsExtendedTunnelId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identity of the egress LSR associated with this + tunnel instance." + ::= { mplsTunnelEntry 4 } + + mplsTunnelName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The canonical name assigned to the tunnel. This name + can be used to refer to the tunnel on the LSR's + console port. If mplsTunnelIsIf is set to true + then the ifName of the interface corresponding to + this tunnel should have a value equal to + mplsTunnelName. Also see the description of ifName + in RFC 2863." + REFERENCE + "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., + and F. Kastenholtz, June 2000" + DEFVAL {""} + ::= { mplsTunnelEntry 5 } + + mplsTunnelDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A textual string containing information about the + tunnel. If there is no description this object + contains a zero length string. This object is may + not be signaled by MPLS signaling protocols, + consequentally the value of this object at transit + and egress LSRs MAY be automatically generated or + absent." + DEFVAL {""} + ::= { mplsTunnelEntry 6 } + + mplsTunnelIsIf OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Denotes whether or not this tunnel corresponds to an + interface represented in the interfaces group + table. Note that if this variable is set to true + then the ifName of the interface corresponding to + this tunnel should have a value equal to + mplsTunnelName. Also see the description of ifName + in RFC 2863. This object is meaningful only at the + ingress and egress LSRs." + REFERENCE + "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., + and F. Kastenholtz, June 2000" + DEFVAL { false } + ::= { mplsTunnelEntry 7 } + + mplsTunnelIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelIsIf is set to true, then this value + contains the LSR-assigned ifIndex which corresponds + to an entry in the interfaces table. Otherwise + this variable should contain the value of zero + indicating that a valid ifIndex was not assigned to + this tunnel interface." + REFERENCE + "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., + and F. Kastenholtz, June 2000" + DEFVAL { 0 } + ::= { mplsTunnelEntry 8 } + + mplsTunnelOwner OBJECT-TYPE + SYNTAX MplsOwner + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes the entity that created and is responsible + for managing this tunnel. This column is + automatically filled by the agent on creation of a + row." + ::= { mplsTunnelEntry 9 } + + mplsTunnelRole OBJECT-TYPE + SYNTAX INTEGER { head(1), + transit(2), + tail(3), + headTail(4) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value signifies the role that this tunnel + entry/instance represents. This value MUST be set + to head(1) at the originating point of the tunnel. + This value MUST be set to transit(2) at transit + points along the tunnel, if transit points are + supported. This value MUST be set to tail(3) at the + terminating point of the tunnel if tunnel tails are + supported. + + The value headTail(4) is provided for tunnels that + begin and end on the same LSR." + DEFVAL { head } + ::= { mplsTunnelEntry 10 } + + mplsTunnelXCPointer OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable points to a row in the mplsXCTable. + This table identifies the segments that compose + this tunnel, their characteristics, and + relationships to each other. A value of zeroDotZero + indicates that no LSP has been associated with this + tunnel yet." + REFERENCE + "Srinivasan, C., Viswanathan, A., and T. Nadeau, + Multiprotocol Label Switching (MPLS) Label Switching + Router (LSR) Management Information Base (MIB), RFC 3813, + June 2004" + DEFVAL { zeroDotZero } + ::= { mplsTunnelEntry 11 } + + mplsTunnelSignallingProto OBJECT-TYPE + SYNTAX INTEGER { + none(1), + rsvp(2), + crldp(3), + other(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The signalling protocol, if any, used to setup this + tunnel." + DEFVAL { none } + ::= { mplsTunnelEntry 12 } + + mplsTunnelSetupPrio OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the setup priority of this tunnel." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001 + 2. Constraint-Based LSP Setup using LDP, Jamoussi + (Editor), RFC 3212, January 2002" + DEFVAL { 0 } + ::= { mplsTunnelEntry 13 } + + mplsTunnelHoldingPrio OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the holding priority for this tunnel." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001 + + 2. Constraint-Based LSP Setup using LDP, Jamoussi + (Editor), RFC 3212, January 2002" + DEFVAL { 0 } + ::= { mplsTunnelEntry 14 } + + mplsTunnelSessionAttributes OBJECT-TYPE + SYNTAX BITS { + fastReroute (0), + mergingPermitted (1), + isPersistent (2), + isPinned (3), + recordRoute(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This bit mask indicates optional session values for + this tunnel. The following describes these bit + fields: + + fastRerouteThis flag indicates that the any tunnel + hop may choose to reroute this tunnel without + tearing it down. This flag permits transit routers + to use a local repair mechanism which may result in + violation of the explicit routing of this tunnel. + When a fault is detected on an adjacent downstream + link or node, a transit router can re-route traffic + for fast service restoration. + + mergingPermitted This flag permits transit routers + to merge this session with other RSVP sessions for + the purpose of reducing resource overhead on + downstream transit routers, thereby providing + better network scaling. + + isPersistent Indicates whether this tunnel should + be restored automatically after a failure occurs. + + isPinned This flag indicates whether the loose- + routed hops of this tunnel are to be pinned. + + recordRouteThis flag indicates whether or not the + signalling protocol should remember the tunnel path + after it has been signaled." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001." + ::= { mplsTunnelEntry 15 } + + mplsTunnelLocalProtectInUse OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates that the local repair mechanism is in use + to maintain this tunnel (usually in the face of an + outage of the link it was previously routed over)." + DEFVAL { false } + ::= { mplsTunnelEntry 16 } + + mplsTunnelResourcePointer OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable represents a pointer to the traffic + parameter specification for this tunnel. This + value may point at an entry in the + mplsTunnelResourceEntry to indicate which + mplsTunnelResourceEntry is to be assigned to this + LSP instance. This value may optionally point at + an externally defined traffic parameter + specification table. A value of zeroDotZero + indicates best-effort treatment. By having the + same value of this object, two or more LSPs can + indicate resource sharing." + DEFVAL { zeroDotZero } + ::= { mplsTunnelEntry 17 } + + mplsTunnelPrimaryInstance OBJECT-TYPE + SYNTAX MplsTunnelInstanceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the instance index of the primary instance + of this tunnel. More details of the definition of + tunnel instances and the primary tunnel instance + can be found in the description of the TEXTUAL-CONVENTION + MplsTunnelInstanceIndex." + DEFVAL { 0 } + ::= { mplsTunnelEntry 18 } + + mplsTunnelInstancePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value indicates which priority, in descending + order, with 0 indicating the lowest priority, + within a group of tunnel instances. A group of + tunnel instances is defined as a set of LSPs with + the same mplsTunnelIndex in this table, but with a + different mplsTunnelInstance. Tunnel instance + priorities are used to denote the priority at which + a particular tunnel instance will supercede + another. Instances of tunnels containing the same + mplsTunnelInstancePriority will be used for load + sharing." + + DEFVAL { 0 } + ::= { mplsTunnelEntry 19 } + + mplsTunnelHopTableIndex OBJECT-TYPE + SYNTAX MplsPathIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Index into the mplsTunnelHopTable entry that + specifies the explicit route hops for this tunnel. + This object is meaningful only at the head-end of + the tunnel." + DEFVAL { 0 } + ::= { mplsTunnelEntry 20 } + + mplsTunnelPathInUse OBJECT-TYPE + SYNTAX MplsPathIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value denotes the configured path that was + chosen for this tunnel. This value reflects the + secondary index into mplsTunnelHopTable. This path + may not exactly match the one in + mplsTunnelARHopTable due to the fact that some CSPF + modification may have taken place. See + mplsTunnelARHopTable for the actual path being + taken by the tunnel. A value of zero denotes that + no path is currently in use or available." + DEFVAL { 0 } + ::= { mplsTunnelEntry 21 } + + mplsTunnelARHopTableIndex OBJECT-TYPE + SYNTAX MplsPathIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index into the mplsTunnelARHopTable entry that + specifies the actual hops traversed by the tunnel. + This is automatically updated by the agent when the + actual hops becomes available." + DEFVAL { 0 } + ::= { mplsTunnelEntry 22 } + + mplsTunnelCHopTableIndex OBJECT-TYPE + SYNTAX MplsPathIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index into the mplsTunnelCHopTable entry that + specifies the computed hops traversed by the + tunnel. This is automatically updated by the agent + when computed hops become available or when + computed hops get modified." + DEFVAL { 0 } + ::= { mplsTunnelEntry 23 } + + mplsTunnelIncludeAnyAffinity OBJECT-TYPE + SYNTAX MplsTunnelAffinity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A link satisfies the include-any constraint if and + only if the constraint is zero, or the link and the + constraint have a resource class in common." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001." + ::= { mplsTunnelEntry 24 } + + mplsTunnelIncludeAllAffinity OBJECT-TYPE + SYNTAX MplsTunnelAffinity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A link satisfies the include-all constraint if and + only if the link contains all of the administrative + groups specified in the constraint." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001." + ::= { mplsTunnelEntry 25 } + + mplsTunnelExcludeAnyAffinity OBJECT-TYPE + SYNTAX MplsTunnelAffinity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A link satisfies the exclude-any constraint if and + only if the link contains none of the + administrative groups specified in the constraint." + REFERENCE + "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, + Awduche et al, RFC 3209, December 2001." + DEFVAL { 0 } + ::= { mplsTunnelEntry 26 } + + mplsTunnelTotalUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value represents the aggregate up time for all + instances of this tunnel, if available. If this + value is unavailable, it MUST return a value of 0." + ::= { mplsTunnelEntry 27 } + + mplsTunnelInstanceUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value identifies the total time that this + tunnel instance's operStatus has been Up(1)." + ::= { mplsTunnelEntry 28 } + + mplsTunnelPrimaryUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the total time the primary instance of + this tunnel has been active. The primary instance + of this tunnel is defined in + mplsTunnelPrimaryInstance." + ::= { mplsTunnelEntry 29 } + + mplsTunnelPathChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of times the actual path for + this tunnel instance has changed." + ::= { mplsTunnelEntry 30 } + + mplsTunnelLastPathChange OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time since the last change to the + actual path for this tunnel instance." + ::= { mplsTunnelEntry 31 } + + mplsTunnelCreationTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the value of SysUpTime when the first + instance of this tunnel came into existence. + That is, when the value of mplsTunnelOperStatus + was first set to up(1)." + ::= { mplsTunnelEntry 32 } + + mplsTunnelStateTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of times the state + (mplsTunnelOperStatus) of this tunnel instance has + changed." + ::= { mplsTunnelEntry 33 } + + mplsTunnelAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + -- ready to pass packets + up(1), + down(2), + -- in some test mode + testing(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the desired operational status of this + tunnel." + ::= { mplsTunnelEntry 34 } + + mplsTunnelOperStatus OBJECT-TYPE + SYNTAX INTEGER { + -- ready to pass packets + up(1), + down(2), + -- in some test mode + testing(3), + -- status cannot be determined + unknown(4), + dormant(5), + -- some component is missing + notPresent(6), + -- down due to the state of + -- lower layer interfaces + lowerLayerDown(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the actual operational status of this + tunnel, which is typically but not limited to, a + function of the state of individual segments of + this tunnel." + ::= { mplsTunnelEntry 35 } + + mplsTunnelRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable is used to create, modify, and/or + delete a row in this table. When a row in this + table is in active(1) state, no objects in that row + can be modified by the agent except + mplsTunnelAdminStatus, mplsTunnelRowStatus and + mplsTunnelStorageType." + ::= { mplsTunnelEntry 36 } + + mplsTunnelStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The storage type for this tunnel entry. + Conceptual rows having the value 'permanent' + need not allow write-access to any columnar + objects in the row." + DEFVAL { volatile } + ::= { mplsTunnelEntry 37 } + + -- End of mplsTunnelTable + + mplsTunnelHopListIndexNext OBJECT-TYPE + SYNTAX MplsPathIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an appropriate value to be used + for mplsTunnelHopListIndex when creating entries in + the mplsTunnelHopTable. If the number of + unassigned entries is exhausted, a retrieval + operation will return a value of 0. This object + may also return a value of 0 when the LSR is unable + to accept conceptual row creation, for example, if + the mplsTunnelHopTable is implemented as read-only. + To obtain the value of mplsTunnelHopListIndex for a + new entry in the mplsTunnelHopTable, the manager + issues a management protocol retrieval operation to + obtain the current value of mplsTunnelHopIndex. + + When the SET is performed to create a row in the + mplsTunnelHopTable, the Command Responder (agent) + must determine whether the value is indeed still + unused; Two Network Management Applications may + attempt to create a row (configuration entry) + simultaneously and use the same value. If it is + currently unused, the SET succeeds and the Command + Responder (agent) changes the value of this object, + according to an implementation-specific algorithm. + If the value is in use, however, the SET fails. The + Network Management Application must then re-read + this variable to obtain a new usable value." + ::= { mplsTeObjects 3 } + + mplsTunnelHopTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelHopTable is used to indicate the hops, + strict or loose, for an instance of an MPLS tunnel + defined in mplsTunnelTable, when it is established + via signalling, for the outgoing direction of the + tunnel. Thus at a transit LSR, this table contains + the desired path of the tunnel from this LSR + onwards. Each row in this table is indexed by + mplsTunnelHopListIndex which corresponds to a group + of hop lists or path options. Each row also has a + secondary index mplsTunnelHopIndex, which indicates + a group of hops (also known as a path option). + Finally, the third index, mplsTunnelHopIndex + indicates the specific hop information for a path + option. In case we want to specify a particular + interface on the originating LSR of an outgoing + tunnel by which we want packets to exit the LSR, + we specify this as the first hop for this tunnel in + mplsTunnelHopTable." + ::= { mplsTeObjects 4 } + + mplsTunnelHopEntry OBJECT-TYPE + SYNTAX MplsTunnelHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a tunnel hop. An + entry is created by a network administrator for + signaled ERLSP set up by an MPLS signalling + protocol." + INDEX { + mplsTunnelHopListIndex, + mplsTunnelHopPathOptionIndex, + mplsTunnelHopIndex + } + ::= { mplsTunnelHopTable 1 } + + MplsTunnelHopEntry ::= SEQUENCE { + mplsTunnelHopListIndex MplsPathIndex, + mplsTunnelHopPathOptionIndex MplsPathIndex, + mplsTunnelHopIndex MplsPathIndex, + mplsTunnelHopAddrType TeHopAddressType, + mplsTunnelHopIpAddr TeHopAddress, + mplsTunnelHopIpPrefixLen InetAddressPrefixLength, + mplsTunnelHopAsNumber TeHopAddressAS, + mplsTunnelHopAddrUnnum TeHopAddressUnnum, + mplsTunnelHopLspId MplsLSPID, + mplsTunnelHopType INTEGER, + mplsTunnelHopInclude TruthValue, + mplsTunnelHopPathOptionName SnmpAdminString, + mplsTunnelHopEntryPathComp INTEGER, + mplsTunnelHopRowStatus RowStatus, + mplsTunnelHopStorageType StorageType + } + + mplsTunnelHopListIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Primary index into this table identifying a + particular explicit route object." + ::= { mplsTunnelHopEntry 1 } + + mplsTunnelHopPathOptionIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Secondary index into this table identifying a + particular group of hops representing a particular + configured path. This is otherwise known as a path + option." + ::= { mplsTunnelHopEntry 2 } + + mplsTunnelHopIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Tertiary index into this table identifying a + particular hop." + ::= { mplsTunnelHopEntry 3 } + + mplsTunnelHopAddrType OBJECT-TYPE + SYNTAX TeHopAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The Hop Address Type of this tunnel hop. + + The value of this object cannot be changed + if the value of the corresponding + mplsTunnelHopRowStatus object is 'active'. + + Note that lspid(5) is a valid option only + for tunnels signaled via CRLDP. + " + DEFVAL { ipv4 } + ::= { mplsTunnelHopEntry 4 } + + mplsTunnelHopIpAddr OBJECT-TYPE + SYNTAX TeHopAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The Tunnel Hop Address for this tunnel hop. + + The type of this address is determined by the + value of the corresponding mplsTunnelHopAddrType. + + The value of this object cannot be changed + if the value of the corresponding + mplsTunnelHopRowStatus object is 'active'. + " + DEFVAL { '00000000'h } -- IPv4 address 0.0.0.0 + ::= { mplsTunnelHopEntry 5 } + + mplsTunnelHopIpPrefixLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-create + STATUS current + DESCRIPTION "If mplsTunnelHopAddrType is set to ipv4(1) or + ipv6(2), then this value will contain an + appropriate prefix length for the IP address in + object mplsTunnelHopIpAddr. Otherwise this value + is irrelevant and should be ignored. + " + DEFVAL { 32 } + ::= { mplsTunnelHopEntry 6 } + + mplsTunnelHopAsNumber OBJECT-TYPE + SYNTAX TeHopAddressAS + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If mplsTunnelHopAddrType is set to asnumber(3), then + this value will contain the AS number of this hop. + Otherwise the agent should set this object to zero- + length string and the manager should ignore this." + ::= { mplsTunnelHopEntry 7 } + + mplsTunnelHopAddrUnnum OBJECT-TYPE + SYNTAX TeHopAddressUnnum + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If mplsTunnelHopAddrType is set to unnum(4), then + this value will contain the interface identifier of + the unnumbered interface for this hop. This object + should be used in conjunction with + mplsTunnelHopIpAddress which would contain the LSR + Router ID in this case. Otherwise the agent should + set this object to zero-length string and the + manager should ignore this." + ::= { mplsTunnelHopEntry 8 } + + mplsTunnelHopLspId OBJECT-TYPE + SYNTAX MplsLSPID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If mplsTunnelHopAddrType is set to lspid(5), then + this value will contain the LSPID of a tunnel of + this hop. The present tunnel being configured is + tunneled through this hop (using label stacking). + This object is otherwise insignificant and should + contain a value of 0 to indicate this fact." + ::= { mplsTunnelHopEntry 9 } + + mplsTunnelHopType OBJECT-TYPE + SYNTAX INTEGER { + strict(1), + loose(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Denotes whether this tunnel hop is routed in a + strict or loose fashion. The value of this object + has no meaning if the mplsTunnelHopInclude object + is set to 'false'." + ::= { mplsTunnelHopEntry 10 } + + mplsTunnelHopInclude OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If this value is set to true, then this indicates + that this hop must be included in the tunnel's + path. If this value is set to 'false', then this hop + must be avoided when calculating the path for this + tunnel. The default value of this object is 'true', + so that by default all indicated hops are included + in the CSPF path computation. If this object is set + to 'false' the value of mplsTunnelHopType should be + ignored." + DEFVAL { true } + ::= { mplsTunnelHopEntry 11 } + + mplsTunnelHopPathOptionName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The description of this series of hops as they + relate to the specified path option. The + value of this object SHOULD be the same for + each hop in the series that comprises a + path option." + ::= { mplsTunnelHopEntry 12 } + + mplsTunnelHopEntryPathComp OBJECT-TYPE + SYNTAX INTEGER { + dynamic(1), -- CSPF computed + explicit(2) -- strict hop + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If this value is set to dynamic, then the user + should only specify the source and destination of + the path and expect that the CSPF will calculate + the remainder of the path. If this value is set to + explicit, the user should specify the entire path + for the tunnel to take. This path may contain + strict or loose hops. Each hop along a specific + path SHOULD have this object set to the same value" + ::= { mplsTunnelHopEntry 13 } + + mplsTunnelHopRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable is used to create, modify, and/or + delete a row in this table. When a row in this + table is in active(1) state, no objects in that row + can be modified by the agent except + mplsTunnelHopRowStatus and + mplsTunnelHopStorageType." + ::= { mplsTunnelHopEntry 14 } + + mplsTunnelHopStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this Hop entry. Conceptual + rows having the value 'permanent' need not + allow write-access to any columnar objects + in the row." + DEFVAL { volatile } + ::= { mplsTunnelHopEntry 15 } + + -- End of mplsTunnelHopTable + + -- Begin of mplsTunnelResourceTable + + mplsTunnelResourceIndexNext OBJECT-TYPE + SYNTAX Unsigned32 (0.. 2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the next appropriate value to + be used for mplsTunnelResourceIndex when creating + entries in the mplsTunnelResourceTable. If the + number of unassigned entries is exhausted, a + retrieval operation will return a value of 0. This + object may also return a value of 0 when the LSR is + unable to accept conceptual row creation, for + example, if the mplsTunnelTable is implemented as + read-only. To obtain the mplsTunnelResourceIndex + value for a new entry, the manager must first issue + a management protocol retrieval operation to obtain + the current value of this object. + + When the SET is performed to create a row in the + mplsTunnelResourceTable, the Command Responder + (agent) must determine whether the value is indeed + still unused; Two Network Management Applications + may attempt to create a row (configuration entry) + simultaneously and use the same value. If it is + currently unused, the SET succeeds and the Command + Responder (agent) changes the value of this object, + according to an implementation-specific algorithm. + If the value is in use, however, the SET fails. The + Network Management Application must then re-read + this variable to obtain a new usable value." + ::= { mplsTeObjects 5 } + + mplsTunnelResourceTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelResourceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelResourceTable allows a manager to + specify which resources are desired for an MPLS + tunnel. This table also allows several tunnels to + point to a single entry in this table, implying + that these tunnels should share resources." + ::= { mplsTeObjects 6 } + + mplsTunnelResourceEntry OBJECT-TYPE + SYNTAX MplsTunnelResourceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a set of resources + for an MPLS tunnel. An entry can be created by a + network administrator or by an SNMP agent as + instructed by any MPLS signalling protocol. + An entry in this table referenced by a tunnel instance + with zero mplsTunnelInstance value indicates a + configured set of resource parameter. An entry + referenced by a tunnel instance with a non-zero + mplsTunnelInstance reflects the in-use resource + parameters for the tunnel instance which may have + been negotiated or modified by the MPLS signaling + protocols." + INDEX { mplsTunnelResourceIndex } + ::= { mplsTunnelResourceTable 1 } + + MplsTunnelResourceEntry ::= SEQUENCE { + mplsTunnelResourceIndex Unsigned32, + mplsTunnelResourceMaxRate MplsBitRate, + mplsTunnelResourceMeanRate MplsBitRate, + mplsTunnelResourceMaxBurstSize MplsBurstSize, + mplsTunnelResourceMeanBurstSize MplsBurstSize, + mplsTunnelResourceExBurstSize MplsBurstSize, + mplsTunnelResourceFrequency INTEGER, + mplsTunnelResourceWeight Unsigned32, + mplsTunnelResourceRowStatus RowStatus, + mplsTunnelResourceStorageType StorageType + } + + mplsTunnelResourceIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Uniquely identifies this row." + ::= { mplsTunnelResourceEntry 1 } + + mplsTunnelResourceMaxRate OBJECT-TYPE + SYNTAX MplsBitRate + UNITS "kilobits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum rate in bits/second. Note that setting + mplsTunnelResourceMaxRate, + mplsTunnelResourceMeanRate, and + mplsTunnelResourceMaxBurstSize to 0 indicates best- + effort treatment." + ::= { mplsTunnelResourceEntry 2 } + + mplsTunnelResourceMeanRate OBJECT-TYPE + SYNTAX MplsBitRate + UNITS "kilobits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is copied into an instance of + mplsTrafficParamMeanRate in the + mplsTrafficParamTable. The OID of this table entry + is then copied into the corresponding + mplsInSegmentTrafficParamPtr." + ::= { mplsTunnelResourceEntry 3 } + + mplsTunnelResourceMaxBurstSize OBJECT-TYPE + SYNTAX MplsBurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum burst size in bytes." + ::= { mplsTunnelResourceEntry 4 } + + mplsTunnelResourceMeanBurstSize OBJECT-TYPE + SYNTAX MplsBurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mean burst size in bytes. The implementations + which do not implement this variable must return + a noSuchObject exception for this object and must + not allow a user to set this object." + ::= { mplsTunnelResourceEntry 5 } + + mplsTunnelResourceExBurstSize OBJECT-TYPE + SYNTAX MplsBurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Excess burst size in bytes. The implementations + which do not implement this variable must return + noSuchObject exception for this object and must + not allow a user to set this value." + REFERENCE + "CR-LDP Specification, Section 4.3." + ::= { mplsTunnelResourceEntry 6 } + + mplsTunnelResourceFrequency OBJECT-TYPE + SYNTAX INTEGER { unspecified(1), + frequent(2), + veryFrequent(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The granularity of the availability of committed + rate. The implementations which do not implement + this variable must return unspecified(1) for this + value and must not allow a user to set this value." + REFERENCE + "CR-LDP Specification, Section 4.3." + ::= { mplsTunnelResourceEntry 7 } + + mplsTunnelResourceWeight OBJECT-TYPE + SYNTAX Unsigned32(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The relative weight for using excess bandwidth above + its committed rate. The value of 0 means that + weight is not applicable for the CR-LSP." + REFERENCE + "CR-LDP Specification, Section 4.3." + ::= { mplsTunnelResourceEntry 8 } + + mplsTunnelResourceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable is used to create, modify, and/or + delete a row in this table. When a row in this + table is in active(1) state, no objects in that row + can be modified by the agent except + mplsTunnelResourceRowStatus and + mplsTunnelResourceStorageType." + ::= { mplsTunnelResourceEntry 9 } + + mplsTunnelResourceStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this Hop entry. Conceptual + rows having the value 'permanent' need not + allow write-access to any columnar objects + in the row." + DEFVAL { volatile } + + ::= { mplsTunnelResourceEntry 10 } + + + -- End mplsTunnelResourceTable + -- Tunnel Actual Route Hop table. + + mplsTunnelARHopTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelARHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelARHopTable is used to indicate the + hops for an MPLS tunnel defined in mplsTunnelTable, + as reported by the MPLS signalling protocol. Thus at + a transit LSR, this table (if the table is supported + and if the signaling protocol is recording actual + route information) contains the actual route of the + whole tunnel. If the signaling protocol is not + recording the actual route, this table MAY report + the information from the mplsTunnelHopTable or the + mplsTunnelCHopTable. + + Each row in this table is indexed by + mplsTunnelARHopListIndex. Each row also has a + secondary index mplsTunnelARHopIndex, corresponding + to the next hop that this row corresponds to. + + Please note that since the information necessary to + build entries within this table is not provided by + some MPLS signalling protocols, implementation of + this table is optional. Furthermore, since the + information in this table is actually provided by + the MPLS signalling protocol after the path has + been set-up, the entries in this table are provided + only for observation, and hence, all variables in + this table are accessible exclusively as read- + only. + + Note also that the contents of this table may change + while it is being read because of re-routing + activities. A network administrator may verify that + the actual route read is consistent by reference to + the mplsTunnelLastPathChange object." + ::= { mplsTeObjects 7 } + + mplsTunnelARHopEntry OBJECT-TYPE + SYNTAX MplsTunnelARHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a tunnel hop. An + entry is created by the agent for signaled ERLSP + set up by an MPLS signalling protocol." + INDEX { mplsTunnelARHopListIndex, mplsTunnelARHopIndex } + ::= { mplsTunnelARHopTable 1 } + + MplsTunnelARHopEntry ::= SEQUENCE { + mplsTunnelARHopListIndex MplsPathIndex, + mplsTunnelARHopIndex MplsPathIndex, + mplsTunnelARHopAddrType TeHopAddressType, + mplsTunnelARHopIpAddr TeHopAddress, + mplsTunnelARHopAddrUnnum TeHopAddressUnnum, + mplsTunnelARHopLspId MplsLSPID + } + + mplsTunnelARHopListIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Primary index into this table identifying a + particular recorded hop list." + ::= { mplsTunnelARHopEntry 1 } + + mplsTunnelARHopIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Secondary index into this table identifying the + particular hop." + ::= { mplsTunnelARHopEntry 2 } + + mplsTunnelARHopAddrType OBJECT-TYPE + SYNTAX TeHopAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Hop Address Type of this tunnel hop. + + Note that lspid(5) is a valid option only + for tunnels signaled via CRLDP." + DEFVAL { ipv4 } + ::= { mplsTunnelARHopEntry 3 } + + mplsTunnelARHopIpAddr OBJECT-TYPE + SYNTAX TeHopAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Tunnel Hop Address for this tunnel hop. + + The type of this address is determined by the + value of the corresponding mplsTunnelARHopAddrType. + If mplsTunnelARHopAddrType is set to unnum(4), + then this value contains the LSR Router ID of the + unnumbered interface. Otherwise the agent SHOULD + set this object to the zero-length string and the + manager should ignore this object." + DEFVAL { '00000000'h } -- IPv4 address 0.0.0.0 + ::= { mplsTunnelARHopEntry 4 } + + mplsTunnelARHopAddrUnnum OBJECT-TYPE + SYNTAX TeHopAddressUnnum + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelARHopAddrType is set to unnum(4), then + this value will contain the interface identifier of + the unnumbered interface for this hop. This object + should be used in conjunction with + mplsTunnelARHopIpAddr which would contain the LSR + Router ID in this case. Otherwise the agent should + set this object to zero-length string and the + manager should ignore this." + ::= { mplsTunnelARHopEntry 5 } + + mplsTunnelARHopLspId OBJECT-TYPE + SYNTAX MplsLSPID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelARHopAddrType is set to lspid(5), then + this value will contain the LSP ID of this hop. + This object is otherwise insignificant and should + contain a value of 0 to indicate this fact." + ::= { mplsTunnelARHopEntry 6 } + + -- End of mplsTunnelARHopTable + -- Tunnel Computed Hop table. + + mplsTunnelCHopTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelCHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelCHopTable is used to indicate the + hops, strict or loose, for an MPLS tunnel defined + in mplsTunnelTable, as computed by a constraint- + based routing protocol, based on the + mplsTunnelHopTable for the outgoing direction of + the tunnel. Thus at a transit LSR, this table (if + the table is supported) MAY contain the path + computed by the CSPF engine on (or on behalf of) + this LSR. Each row in this table is indexed by + mplsTunnelCHopListIndex. Each row also has a + secondary index mplsTunnelCHopIndex, corresponding + to the next hop that this row corresponds to. In + case we want to specify a particular interface on + the originating LSR of an outgoing tunnel by which + we want packets to exit the LSR, we specify this as + the first hop for this tunnel in + mplsTunnelCHopTable. + + Please note that since the information necessary to + build entries within this table may not be + supported by some LSRs, implementation of this + table is optional. Furthermore, since the + information in this table describes the path + computed by the CSPF engine the entries in this + table are read-only." + ::= { mplsTeObjects 8 } + + mplsTunnelCHopEntry OBJECT-TYPE + SYNTAX MplsTunnelCHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a tunnel hop. An + entry in this table is created by a path + computation engine using CSPF techniques applied to + the information collected by routing protocols and + the hops specified in the corresponding + mplsTunnelHopTable." + INDEX { mplsTunnelCHopListIndex, mplsTunnelCHopIndex } + ::= { mplsTunnelCHopTable 1 } + + MplsTunnelCHopEntry ::= SEQUENCE { + mplsTunnelCHopListIndex MplsPathIndex, + mplsTunnelCHopIndex MplsPathIndex, + mplsTunnelCHopAddrType TeHopAddressType, + mplsTunnelCHopIpAddr TeHopAddress, + mplsTunnelCHopIpPrefixLen InetAddressPrefixLength, + mplsTunnelCHopAsNumber TeHopAddressAS, + mplsTunnelCHopAddrUnnum TeHopAddressUnnum, + mplsTunnelCHopLspId MplsLSPID, + mplsTunnelCHopType INTEGER + } + + mplsTunnelCHopListIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Primary index into this table identifying a + particular computed hop list." + ::= { mplsTunnelCHopEntry 1 } + + mplsTunnelCHopIndex OBJECT-TYPE + SYNTAX MplsPathIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Secondary index into this table identifying the + particular hop." + ::= { mplsTunnelCHopEntry 2 } + + mplsTunnelCHopAddrType OBJECT-TYPE + SYNTAX TeHopAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Hop Address Type of this tunnel hop. + + Note that lspid(5) is a valid option only + for tunnels signaled via CRLDP." + DEFVAL { ipv4 } + ::= { mplsTunnelCHopEntry 3 } + + mplsTunnelCHopIpAddr OBJECT-TYPE + SYNTAX TeHopAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Tunnel Hop Address for this tunnel hop. + The type of this address is determined by the + value of the corresponding mplsTunnelCHopAddrType. + + If mplsTunnelCHopAddrType is set to unnum(4), then + this value will contain the LSR Router ID of the + unnumbered interface. Otherwise the agent should + set this object to the zero-length string and the + manager SHOULD ignore this object." + DEFVAL { '00000000'h } -- IPv4 address 0.0.0.0 + ::= { mplsTunnelCHopEntry 4 } + + mplsTunnelCHopIpPrefixLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelCHopAddrType is set to ipv4(1) or + ipv6(2), then this value will contain an + appropriate prefix length for the IP address in + object mplsTunnelCHopIpAddr. Otherwise this value + is irrelevant and should be ignored. + " + DEFVAL { 32 } + ::= { mplsTunnelCHopEntry 5 } + + mplsTunnelCHopAsNumber OBJECT-TYPE + SYNTAX TeHopAddressAS + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelCHopAddrType is set to asnumber(3), + then this value will contain the AS number of this + hop. Otherwise the agent should set this object to + zero-length string and the manager should ignore + this." + ::= { mplsTunnelCHopEntry 6 } + + mplsTunnelCHopAddrUnnum OBJECT-TYPE + SYNTAX TeHopAddressUnnum + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelCHopAddrType is set to unnum(4), then + this value will contain the unnumbered interface + identifier of this hop. This object should be used + in conjunction with mplsTunnelCHopIpAddr which + would contain the LSR Router ID in this case. + Otherwise the agent should set this object to zero- + length string and the manager should ignore this." + ::= { mplsTunnelCHopEntry 7 } + + mplsTunnelCHopLspId OBJECT-TYPE + SYNTAX MplsLSPID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If mplsTunnelCHopAddrType is set to lspid(5), then + this value will contain the LSP ID of this hop. + This object is otherwise insignificant and should + contain a value of 0 to indicate this fact." + ::= { mplsTunnelCHopEntry 8 } + + mplsTunnelCHopType OBJECT-TYPE + SYNTAX INTEGER { strict(1), + loose(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes whether this is tunnel hop is routed in a + strict or loose fashion." + ::= { mplsTunnelCHopEntry 9 } + + -- End of mplsTunnelCHopTable + + + -- MPLS Tunnel Performance Table. + + mplsTunnelPerfTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides per-tunnel instance MPLS + performance information." + ::= { mplsTeObjects 9 } + + mplsTunnelPerfEntry OBJECT-TYPE + SYNTAX MplsTunnelPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table is created by the LSR for + every tunnel. Its is an extension to + mplsTunnelEntry." + + AUGMENTS { mplsTunnelEntry } + ::= { mplsTunnelPerfTable 1 } + + MplsTunnelPerfEntry ::= SEQUENCE { + mplsTunnelPerfPackets Counter32, + mplsTunnelPerfHCPackets Counter64, + mplsTunnelPerfErrors Counter32, + mplsTunnelPerfBytes Counter32, + mplsTunnelPerfHCBytes Counter64 + } + + mplsTunnelPerfPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets forwarded by the tunnel. + This object should represents the 32-bit + value of the least significant part of the + 64-bit value if both mplsTunnelPerfHCPackets + is returned." + ::= { mplsTunnelPerfEntry 1 } + + mplsTunnelPerfHCPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "High capacity counter for number of packets + forwarded by the tunnel. " + ::= { mplsTunnelPerfEntry 2 } + + mplsTunnelPerfErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets dropped because of errors or for + other reasons." + ::= { mplsTunnelPerfEntry 3 } + + mplsTunnelPerfBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bytes forwarded by the tunnel. + This object should represents the 32-bit + value of the least significant part of the + 64-bit value if both mplsTunnelPerfHCBytes + is returned." + ::= { mplsTunnelPerfEntry 4 } + + mplsTunnelPerfHCBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "High capacity counter for number of bytes forwarded + by the tunnel." + ::= { mplsTunnelPerfEntry 5 } + + -- End of mplsTunnelPerfTable + + + -- CR-LDP Tunnel Resource Table + + mplsTunnelCRLDPResTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsTunnelCRLDPResEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The mplsTunnelCRLDPResTable allows a manager to + specify which CR-LDP-specific resources are desired + for an MPLS tunnel if that tunnel is signaled using + CR-LDP. Note that these attributes are in addition + to those specified in mplsTunnelResourceTable. This + table also allows several tunnels to point to a + single entry in this table, implying that these + tunnels should share resources." + ::= { mplsTeObjects 10 } + + mplsTunnelCRLDPResEntry OBJECT-TYPE + SYNTAX MplsTunnelCRLDPResEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a set of resources + for an MPLS tunnel established using CRLDP + (mplsTunnelSignallingProto equal to crldp (3)). An + entry can be created by a network administrator or + by an SNMP agent as instructed by any MPLS + signalling protocol." + INDEX { mplsTunnelResourceIndex } + ::= { mplsTunnelCRLDPResTable 1 } + + MplsTunnelCRLDPResEntry ::= SEQUENCE { + mplsTunnelCRLDPResMeanBurstSize MplsBurstSize, + mplsTunnelCRLDPResExBurstSize MplsBurstSize, + mplsTunnelCRLDPResFrequency INTEGER, + mplsTunnelCRLDPResWeight Unsigned32, + mplsTunnelCRLDPResFlags Unsigned32, + mplsTunnelCRLDPResRowStatus RowStatus, + mplsTunnelCRLDPResStorageType StorageType + } + + mplsTunnelCRLDPResMeanBurstSize OBJECT-TYPE + SYNTAX MplsBurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mean burst size in bytes." + ::= { mplsTunnelCRLDPResEntry 1 } + + mplsTunnelCRLDPResExBurstSize OBJECT-TYPE + SYNTAX MplsBurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Excess burst size in bytes." + REFERENCE + "CR-LDP Specification, Section 4.3." + ::= { mplsTunnelCRLDPResEntry 2 } + + mplsTunnelCRLDPResFrequency OBJECT-TYPE + SYNTAX INTEGER { + unspecified(1), + frequent(2), + veryFrequent(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The granularity of the availability of committed + rate." + REFERENCE + "CR-LDP Specification, Section 4.3." + ::= { mplsTunnelCRLDPResEntry 3 } + + mplsTunnelCRLDPResWeight OBJECT-TYPE + SYNTAX Unsigned32(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The relative weight for using excess bandwidth above + its committed rate. The value of 0 means that + weight is not applicable for the CR-LSP." + REFERENCE + "CR-LDP Specification, Section 4.3." + DEFVAL { 0 } + ::= { mplsTunnelCRLDPResEntry 4 } + + mplsTunnelCRLDPResFlags OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of the 1 byte Flags conveyed as part of + the traffic parameters during the establishment of + the CRLSP. The bits in this object are to be + interpreted as follows. + + +--+--+--+--+--+--+--+--+ + | Res |F6|F5|F4|F3|F2|F1| + +--+--+--+--+--+--+--+--+ + + Res - These bits are reserved. Zero on transmission. + Ignored on receipt. + F1 - Corresponds to the PDR. + F2 - Corresponds to the PBS. + F3 - Corresponds to the CDR. + F4 - Corresponds to the CBS. + F5 - Corresponds to the EBS. + F6 - Corresponds to the Weight. + + Each flag if is a Negotiable Flag corresponding to a + Traffic Parameter. The Negotiable Flag value zero + denotes Not Negotiable and value one denotes + Negotiable." + REFERENCE + "1. Section 4.3, Constraint-Based LSP Setup using + LDP, Jamoussi (Editor), RFC 3212, January 2002" + DEFVAL { 0 } + ::= { mplsTunnelCRLDPResEntry 5 } + + mplsTunnelCRLDPResRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable is used to create, modify, and/or + delete a row in this table. When a row in this + table is in active(1) state, no objects in that row + can be modified by the agent except + mplsTunnelCRLDPResRowStatus and + mplsTunnelCRLDPResStorageType." + ::= { mplsTunnelCRLDPResEntry 6 } + + mplsTunnelCRLDPResStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this CR-LDP Resource entry. + Conceptual rows having the value 'permanent' + need not allow write-access to any columnar + objects in the row." + DEFVAL { volatile } + ::= { mplsTunnelCRLDPResEntry 7 } + + + -- Notifications. + + mplsTunnelNotificationEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this object is true, then it enables the + generation of mplsTunnelUp and mplsTunnelDown + traps, otherwise these traps are not emitted." + DEFVAL { false } + ::= { mplsTeObjects 11 } + + mplsTunnelUp NOTIFICATION-TYPE + OBJECTS { + mplsTunnelAdminStatus, + mplsTunnelOperStatus + } + STATUS current + DESCRIPTION + "This notification is generated when a + mplsTunnelOperStatus object for one of the + configured tunnels is about to leave the down state + and transition into some other state (but not into + the notPresent state). This other state is + indicated by the included value of + mplsTunnelOperStatus." + ::= { mplsTeNotifications 1 } + + mplsTunnelDown NOTIFICATION-TYPE + OBJECTS { + mplsTunnelAdminStatus, + mplsTunnelOperStatus + } + STATUS current + DESCRIPTION + "This notification is generated when a + mplsTunnelOperStatus object for one of the + configured tunnels is about to enter the down state + from some other state (but not from the notPresent + state). This other state is indicated by the + included value of mplsTunnelOperStatus." + ::= { mplsTeNotifications 2 } + + mplsTunnelRerouted NOTIFICATION-TYPE + OBJECTS { + mplsTunnelAdminStatus, + mplsTunnelOperStatus + } + STATUS current + DESCRIPTION + "This notification is generated when a tunnel is + rerouted. If the mplsTunnelARHopTable is used, then + this tunnel instance's entry in the + mplsTunnelARHopTable MAY contain the new path for + this tunnel some time after this trap is issued by + the agent." + ::= { mplsTeNotifications 3 } + + mplsTunnelReoptimized NOTIFICATION-TYPE + OBJECTS { + mplsTunnelAdminStatus, + mplsTunnelOperStatus + } + STATUS current + DESCRIPTION + "This notification is generated when a tunnel is + reoptimized. If the mplsTunnelARHopTable is used, + then this tunnel instance's entry in the + mplsTunnelARHopTable MAY contain the new path for + this tunnel some time after this trap is issued by + the agent." + ::= { mplsTeNotifications 4 } + + -- End of notifications. + -- Module compliance. + + mplsTeGroups + OBJECT IDENTIFIER ::= { mplsTeConformance 1 } + + mplsTeCompliances + OBJECT IDENTIFIER ::= { mplsTeConformance 2 } + + -- Compliance requirement for fully compliant implementations. + + mplsTeModuleFullCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for agents that provide full + support the MPLS-TE-STD-MIB module." + + MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863. + MANDATORY-GROUPS { + ifGeneralInformationGroup, + ifCounterDiscontinuityGroup + } + + MODULE -- this module + + -- The mandatory group has to be implemented by all + -- LSRs that originate/terminate ESLSPs/tunnels. + -- In addition, depending on the type of tunnels + -- supported, other groups become mandatory as + -- explained below. + + MANDATORY-GROUPS { + mplsTunnelGroup, + mplsTunnelScalarGroup + } + + GROUP mplsTunnelManualGroup + DESCRIPTION + "This group is mandatory for devices which support + manual configuration of tunnels." + + GROUP mplsTunnelSignaledGroup + DESCRIPTION + "This group is mandatory for devices which support + signaled tunnel set up." + + GROUP mplsTunnelIsNotIntfcGroup + DESCRIPTION + "This group is mandatory for devices which support + tunnels that are not interfaces." + + GROUP mplsTunnelIsIntfcGroup + DESCRIPTION + "This group is mandatory for devices which support + tunnels that are interfaces." + + GROUP mplsTunnelCRLDPResOptionalGroup + DESCRIPTION + "Objects in this group are required by + implementations supporting the CR-LDP protocol for + signalling of TE tunnels." + + GROUP mplsTeNotificationGroup + DESCRIPTION "This group is mandatory for those implementations + which can implement the notifications + contained in this group." + + OBJECT mplsTunnelRowStatus + SYNTAX RowStatus { active(1), notInService(2) } + WRITE-SYNTAX RowStatus { active(1), notInService(2), + createAndGo(4), destroy(6) + } + DESCRIPTION "Support for createAndWait and notReady is not + required." + + OBJECT mplsTunnelHopRowStatus + SYNTAX RowStatus { active(1), notInService(2) } + WRITE-SYNTAX RowStatus { active(1), notInService(2), + createAndGo(4), destroy(6) + } + DESCRIPTION "Support for createAndWait and notReady is not + required." + + OBJECT mplsTunnelCRLDPResRowStatus + SYNTAX RowStatus { active(1), notInService(2) } + WRITE-SYNTAX RowStatus { active(1), notInService(2), + createAndGo(4), destroy(6) + } + DESCRIPTION "Support for createAndWait and notReady is + not required." + + ::= { mplsTeCompliances 1 } + + -- Compliance requirement for read-only implementations. + + mplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance requirement for implementations that only + provide read-only support for MPLS-TE-STD-MIB. + Such devices can then be monitored but cannot be + configured using this MIB modules." + + MODULE -- this module + + -- mplsTunnelTable + + MANDATORY-GROUPS { + mplsTunnelGroup, + mplsTunnelScalarGroup + } + + GROUP mplsTunnelManualGroup + DESCRIPTION + "This group is mandatory for devices which support + manual configuration of tunnels." + + GROUP mplsTunnelSignaledGroup + DESCRIPTION + "This group is mandatory for devices which support + signaled tunnel set up." + + GROUP mplsTunnelIsNotIntfcGroup + DESCRIPTION + "This group is mandatory for devices which support + tunnels that are not interfaces." + + GROUP mplsTunnelIsIntfcGroup + DESCRIPTION + "This group is mandatory for devices which support + tunnels that are interfaces." + + GROUP mplsTunnelCRLDPResOptionalGroup + DESCRIPTION + "Objects in this group are required by + implementations supporting the CR-LDP protocol for + signalling of TE tunnels." + + GROUP mplsTeNotificationGroup + DESCRIPTION "This group is mandatory for those implementations + which can implement the notifications + contained in this group." + + -- mplsTunnelTable + OBJECT mplsTunnelName + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelDescr + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelIsIf + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelIfIndex + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelXCPointer + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelSignallingProto + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelSetupPrio + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHoldingPrio + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelSessionAttributes + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelLocalProtectInUse + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelResourcePointer + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelInstancePriority + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHopTableIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelIncludeAnyAffinity + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelIncludeAllAffinity + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelExcludeAnyAffinity + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelPathInUse + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelRole + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelAdminStatus + SYNTAX INTEGER { up (1), down (2) } + MIN-ACCESS read-only + DESCRIPTION + "Only up and down states must be supported. Write + access is not required." + + OBJECT mplsTunnelRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + -- mplsTunnelHopTable + + OBJECT mplsTunnelHopAddrType + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelHopIpAddr + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelHopIpPrefixLen + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHopAddrUnnum + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHopAsNumber + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHopLspId + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelHopType + SYNTAX INTEGER { strict(1) } + MIN-ACCESS read-only + DESCRIPTION + "loose(2) need not be supported. Write access is + not required." + + OBJECT mplsTunnelHopInclude + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelHopPathOptionName + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + OBJECT mplsTunnelHopEntryPathComp + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelHopRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelHopStorageType + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + -- mplsTunnelResourceTable + + OBJECT mplsTunnelResourceMaxRate + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceMeanRate + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceMaxBurstSize + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceMeanBurstSize + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceExBurstSize + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT mplsTunnelResourceFrequency + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceWeight + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelResourceRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + OBJECT mplsTunnelResourceStorageType + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + -- mplsTunnelCRLDPResTable + + OBJECT mplsTunnelCRLDPResMeanBurstSize + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResExBurstSize + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResFrequency + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResWeight + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResFlags + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT mplsTunnelCRLDPResStorageType + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + ::= { mplsTeCompliances 2 } + + + -- Units of conformance. + + mplsTunnelGroup OBJECT-GROUP + OBJECTS { + mplsTunnelIndexNext, + mplsTunnelName, + mplsTunnelDescr, + mplsTunnelOwner, + mplsTunnelXCPointer, + mplsTunnelIfIndex, + mplsTunnelHopTableIndex, + mplsTunnelARHopTableIndex, + mplsTunnelCHopTableIndex, + mplsTunnelAdminStatus, + mplsTunnelOperStatus, + mplsTunnelRowStatus, + mplsTunnelNotificationEnable, + mplsTunnelStorageType, + mplsTunnelConfigured, + mplsTunnelActive, + mplsTunnelPrimaryInstance, + mplsTunnelPrimaryUpTime, + mplsTunnelPathChanges, + mplsTunnelLastPathChange, + mplsTunnelCreationTime, + mplsTunnelStateTransitions, + mplsTunnelIncludeAnyAffinity, + mplsTunnelIncludeAllAffinity, + mplsTunnelExcludeAnyAffinity, + mplsTunnelPerfPackets, + mplsTunnelPerfHCPackets, + mplsTunnelPerfErrors, + mplsTunnelPerfBytes, + mplsTunnelPerfHCBytes, + mplsTunnelResourcePointer, + mplsTunnelInstancePriority, + mplsTunnelPathInUse, + mplsTunnelRole, + mplsTunnelTotalUpTime, + mplsTunnelInstanceUpTime, + mplsTunnelResourceIndexNext, + mplsTunnelResourceMaxRate, + mplsTunnelResourceMeanRate, + mplsTunnelResourceMaxBurstSize, + mplsTunnelResourceMeanBurstSize, + mplsTunnelResourceExBurstSize, + mplsTunnelResourceFrequency, + mplsTunnelResourceWeight, + mplsTunnelResourceRowStatus, + mplsTunnelResourceStorageType, + mplsTunnelARHopAddrType, + mplsTunnelARHopIpAddr, + mplsTunnelARHopAddrUnnum, + mplsTunnelARHopLspId, + mplsTunnelCHopAddrType, + mplsTunnelCHopIpAddr, + mplsTunnelCHopIpPrefixLen, + mplsTunnelCHopAsNumber, + mplsTunnelCHopAddrUnnum, + mplsTunnelCHopLspId, + mplsTunnelCHopType + } + STATUS current + DESCRIPTION + "Necessary, but not sufficient, set of objects to + implement tunnels. In addition, depending on the + type of the tunnels supported (for example, + manually configured or signaled, persistent or non- + persistent, etc.), the following other groups + defined below are mandatory: mplsTunnelManualGroup + and/or mplsTunnelSignaledGroup, + mplsTunnelIsNotIntfcGroup and/or + mplsTunnelIsIntfcGroup." + ::= { mplsTeGroups 1 } + + mplsTunnelManualGroup OBJECT-GROUP + OBJECTS { mplsTunnelSignallingProto } + STATUS current + DESCRIPTION + "Object(s) needed to implement manually configured + tunnels." + ::= { mplsTeGroups 2 } + + mplsTunnelSignaledGroup OBJECT-GROUP + OBJECTS { + mplsTunnelSetupPrio, + mplsTunnelHoldingPrio, + mplsTunnelSignallingProto, + mplsTunnelLocalProtectInUse, + mplsTunnelSessionAttributes, + mplsTunnelHopListIndexNext, + mplsTunnelHopAddrType, + mplsTunnelHopIpAddr, + mplsTunnelHopIpPrefixLen, + mplsTunnelHopAddrUnnum, + mplsTunnelHopAsNumber, + mplsTunnelHopLspId, + mplsTunnelHopType, + mplsTunnelHopInclude, + mplsTunnelHopPathOptionName, + mplsTunnelHopEntryPathComp, + mplsTunnelHopRowStatus, + mplsTunnelHopStorageType + } + STATUS current + DESCRIPTION + "Objects needed to implement signaled tunnels." + ::= { mplsTeGroups 3 } + + mplsTunnelScalarGroup OBJECT-GROUP + OBJECTS { + mplsTunnelConfigured, + mplsTunnelActive, + mplsTunnelTEDistProto, + mplsTunnelMaxHops, + mplsTunnelNotificationMaxRate + } + STATUS current + DESCRIPTION + "Scalar object needed to implement MPLS tunnels." + ::= { mplsTeGroups 4 } + + mplsTunnelIsIntfcGroup OBJECT-GROUP + OBJECTS { mplsTunnelIsIf } + STATUS current + DESCRIPTION + "Objects needed to implement tunnels that are + interfaces." + ::= { mplsTeGroups 5 } + + mplsTunnelIsNotIntfcGroup OBJECT-GROUP + OBJECTS { mplsTunnelIsIf } + STATUS current + DESCRIPTION + "Objects needed to implement tunnels that are not + interfaces." + ::= { mplsTeGroups 6 } + + mplsTunnelCRLDPResOptionalGroup OBJECT-GROUP + OBJECTS { + mplsTunnelCRLDPResMeanBurstSize, + mplsTunnelCRLDPResExBurstSize, + mplsTunnelCRLDPResFrequency, + mplsTunnelCRLDPResWeight, + mplsTunnelCRLDPResFlags, + mplsTunnelCRLDPResRowStatus, + mplsTunnelCRLDPResStorageType + } + STATUS current + DESCRIPTION + "Set of objects implemented for resources applicable + for tunnels signaled using CR-LDP." + ::= { mplsTeGroups 7 } + + mplsTeNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + mplsTunnelUp, + mplsTunnelDown, + mplsTunnelRerouted, + mplsTunnelReoptimized + } + STATUS current + DESCRIPTION + "Set of notifications implemented in this module. + None is mandatory." + ::= { mplsTeGroups 8 } + + END + +-- +-- Copyright (C) The Internet Society (2004). This document is subject +-- to the rights, licenses and restrictions contained in BCP 78, and +-- except as set forth therein, the authors retain all their rights. +-- +-- This document and the information contained herein are provided on an +-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE +-- REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE +-- INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR +-- IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF +-- THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED +-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- Intellectual Property +-- +-- The IETF takes no position regarding the validity or scope of any +-- Intellectual Property Rights or other rights that might be claimed +-- to pertain to the implementation or use of the technology +-- described in this document or the extent to which any license +-- under such rights might or might not be available; nor does it +-- represent that it has made any independent effort to identify any +-- such rights. Information on the procedures with respect to +-- rights in RFC documents can be found in BCP 78 and BCP 79. +-- +-- Copies of IPR disclosures made to the IETF Secretariat and any +-- assurances of licenses to be made available, or the result of an +-- attempt made to obtain a general license or permission for the use +-- of such proprietary rights by implementers or users of this +-- specification can be obtained from the IETF on-line IPR repository +-- at http://www.ietf.org/ipr. +-- +-- The IETF invites any interested party to bring to its attention +-- any copyrights, patents or patent applications, or other +-- proprietary rights that may cover technology that may be required +-- to implement this standard. Please address the information to the +-- IETF at ietf-ipr@ietf.org. +-- + |