diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/PW-STD-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/PW-STD-MIB')
| -rw-r--r-- | MIBS/PW-STD-MIB | 2438 |
1 files changed, 2438 insertions, 0 deletions
diff --git a/MIBS/PW-STD-MIB b/MIBS/PW-STD-MIB new file mode 100644 index 0000000..3c6df19 --- /dev/null +++ b/MIBS/PW-STD-MIB @@ -0,0 +1,2438 @@ +PW-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
+ Integer32, Unsigned32, Counter32, Counter64, TimeTicks,
+ transmission
+ FROM SNMPv2-SMI -- [RFC2578]
+
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF -- [RFC2580]
+
+ TruthValue, RowStatus, StorageType,
+ TimeStamp
+ FROM SNMPv2-TC -- [RFC2579]
+
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
+
+ InterfaceIndexOrZero
+ FROM IF-MIB -- [RFC2863]
+
+ InetAddressType, InetAddress
+ FROM INET-ADDRESS-MIB -- [RFC4001]
+
+ PerfCurrentCount, PerfIntervalCount
+ FROM PerfHist-TC-MIB -- [RFC3593]
+
+ HCPerfCurrentCount, HCPerfIntervalCount, HCPerfTimeElapsed,
+ HCPerfValidIntervals
+ FROM HC-PerfHist-TC-MIB -- [RFC3705]
+
+ PwIndexType, PwIndexOrZeroType, PwGroupID, PwIDType,
+ PwOperStatusTC, PwAttachmentIdentifierType, PwCwStatusTC,
+ PwStatus, PwFragSize, PwFragStatus, PwGenIdType
+ FROM PW-TC-STD-MIB -- [RFC5542]
+ IANAPwTypeTC, IANAPwPsnTypeTC, IANAPwCapabilities
+ FROM IANA-PWE3-MIB -- [RFC5601]
+;
+
+pwStdMIB MODULE-IDENTITY
+ LAST-UPDATED "200906110000Z" -- 11 June 2009 00:00:00 GMT
+ ORGANIZATION "Pseudowire Edge-to-Edge Emulation (PWE3) Working
+ Group"
+ CONTACT-INFO
+ "David Zelig
+ Email: davidz@oversi.com
+
+ Thomas D. Nadeau
+ Email: tom.nadeau@bt.com
+
+ The PWE3 Working Group (email distribution pwe3@ietf.org,
+ http://www.ietf.org/html.charters/pwe3-charter.html)
+ "
+ DESCRIPTION
+ "This MIB module contains managed object definitions for
+ pseudowire operation as in Bryant, S. and P. Pate, 'Pseudo
+ Wire Emulation Edge-to-Edge (PWE3) Architecture' [RFC3985],
+ Martini, L., et al, 'Pseudowire Setup and Maintenance Using
+ the Label Distribution Protocol (LDP)' [RFC4447], and
+ Townsley, M., et al, 'Layer Two Tunneling Protocol
+ (Version 3)' [RFC3931].
+
+ This MIB module enables the use of any underlying packet
+ switched network (PSN). MIB nodules that will support
+ PW operations over specific PSN types are defined in
+ separate memos.
+
+ The indexes for this MIB module are also used to index the
+ PSN-specific tables and the PW-specific tables. The PW Type
+ dictates which PW-specific MIB module to use.
+
+ Copyright (c) 2009 IETF Trust and the persons identified
+ as authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, are permitted provided that the following
+ conditions are met:
+
+ - Redistributions of source code must retain the above
+ copyright notice, this list of conditions and the following
+ disclaimer.
+
+ - Redistributions in binary form must reproduce the above
+ copyright notice, this list of conditions and the following
+ disclaimer in the documentation and/or other materials
+ provided with the distribution.
+
+ - Neither the name of Internet Society, IETF or IETF Trust, nor
+ the names of specific contributors, may be used to endorse or
+ promote products derived from this software without specific
+ prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ This version of this MIB module is part of RFC 5601;
+ see the RFC itself for full legal notices.
+ "
+
+ -- Revision history.
+ REVISION
+ "200906110000Z" -- 11 June 2009 00:00:00 GMT
+ DESCRIPTION "Initial version published as part of RFC 5601."
+ ::= { transmission 246 }
+
+-- Top-level components of this MIB.
+
+-- Notifications
+pwNotifications OBJECT IDENTIFIER
+ ::= { pwStdMIB 0 }
+-- Tables, Scalars
+pwObjects OBJECT IDENTIFIER
+ ::= { pwStdMIB 1 }
+-- Conformance
+pwConformance OBJECT IDENTIFIER
+ ::= { pwStdMIB 2 }
+
+-- PW Virtual Connection Table
+
+pwIndexNext OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains an appropriate value to be used for
+ pwIndex when creating entries in the pwTable. The value 0
+ indicates that no unassigned entries are available. To
+ obtain the value of pwIndex for a new entry in the pwTable,
+ the manager issues a management protocol retrieval
+ operation. The agent will determine through its local policy
+ when this index value will be made available for reuse."
+ ::= { pwObjects 1 }
+
+pwTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table specifies information for configuring and
+ status monitoring that is common to all service types
+ and PSN types."
+ ::= { pwObjects 2 }
+
+pwEntry OBJECT-TYPE
+ SYNTAX PwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A row in this table represents a pseudowire (PW) virtual
+ connection across a packet network. It is indexed by
+ pwIndex, which uniquely identifies a singular
+ connection.
+ A row can be created by an operator command from a
+ management plan of a PE, by signaling, or due to auto-
+ discovery process. An operator's command can be issued via
+ a non-SNMP application; in such case, a row will be created
+ implicitly by the agent.
+ The read-create objects in this table are divided into
+ three categories:
+ 1) Objects that MUST NOT be changed after row activation.
+ These are objects that define basic properties of the
+ PW (for example type, destination, etc.).
+ 2) Objects that MAY be changed when the PW is
+ defined as not active. A change of these objects involves
+ re-signaling of the PW or it might be traffic affecting.
+ PW not active is defined as one of the following
+ conditions:
+ a) The pwRowStatus is notInService(2).
+ b) The pwRowStatus is notReady(3).
+ c) The pwAdminStatus is down(2).
+ If the operator needs to change one of the values for an
+ active row, the operator can either set the pwRowStatus to
+ notInService(2) or set pwAdminStatus to down(2).
+ Signaling (or traffic) is initiated again upon setting
+ the pwRowStatus to active(1) or setting the pwAdminStatus
+ to up(1) or testing(3), respectively.
+
+ 3) Objects that MAY be changed at any time.
+
+ A PW MAY have an entry in the ifTable in addition to the
+ entry in this table. In this case, a special ifType for PW
+ will be set in the ifTable, and the ifIndex in the ifTable
+ of the PW will be set in the pwIfIndex object in this table.
+
+ By default, all the read-create objects MUST NOT be
+ changed after row activation, unless specifically indicated
+ in the individual object description.
+
+ Manual entries in this table SHOULD be preserved after a
+ reboot; the agent MUST ensure the integrity of those
+ entries. If the set of entries of a specific row are found
+ to be inconsistent after reboot, the PW pwOperStatus MUST
+ be declared as notPresent(5).
+ "
+ INDEX { pwIndex }
+ ::= { pwTable 1 }
+
+PwEntry ::= SEQUENCE {
+ pwIndex PwIndexType,
+ pwType IANAPwTypeTC,
+ pwOwner INTEGER,
+ pwPsnType IANAPwPsnTypeTC,
+ pwSetUpPriority Integer32,
+ pwHoldingPriority Integer32,
+ pwPeerAddrType InetAddressType,
+ pwPeerAddr InetAddress,
+ pwAttachedPwIndex PwIndexOrZeroType,
+ pwIfIndex InterfaceIndexOrZero,
+ pwID PwIDType,
+ pwLocalGroupID PwGroupID,
+ pwGroupAttachmentID PwAttachmentIdentifierType,
+ pwLocalAttachmentID PwAttachmentIdentifierType,
+ pwRemoteAttachmentID PwAttachmentIdentifierType,
+ pwCwPreference TruthValue,
+ pwLocalIfMtu Unsigned32,
+ pwLocalIfString TruthValue,
+ pwLocalCapabAdvert IANAPwCapabilities,
+ pwRemoteGroupID PwGroupID,
+ pwCwStatus PwCwStatusTC,
+ pwRemoteIfMtu Unsigned32,
+ pwRemoteIfString SnmpAdminString,
+ pwRemoteCapabilities IANAPwCapabilities,
+ pwFragmentCfgSize PwFragSize,
+ pwRmtFragCapability PwFragStatus,
+ pwFcsRetentionCfg INTEGER,
+ pwFcsRetentionStatus BITS,
+ pwOutboundLabel Unsigned32,
+ pwInboundLabel Unsigned32,
+ pwName SnmpAdminString,
+ pwDescr SnmpAdminString,
+ pwCreateTime TimeStamp,
+ pwUpTime TimeTicks,
+ pwLastChange TimeTicks,
+ pwAdminStatus INTEGER,
+ pwOperStatus PwOperStatusTC,
+ pwLocalStatus PwStatus,
+ pwRemoteStatusCapable INTEGER,
+ pwRemoteStatus PwStatus,
+ pwTimeElapsed HCPerfTimeElapsed,
+ pwValidIntervals HCPerfValidIntervals,
+ pwRowStatus RowStatus,
+ pwStorageType StorageType,
+ pwOamEnable TruthValue,
+ pwGenAGIType PwGenIdType,
+ pwGenLocalAIIType PwGenIdType,
+ pwGenRemoteAIIType PwGenIdType
+ }
+
+pwIndex OBJECT-TYPE
+ SYNTAX PwIndexType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique index for the conceptual row identifying a PW within
+ this table."
+ ::= { pwEntry 1 }
+
+pwType OBJECT-TYPE
+ SYNTAX IANAPwTypeTC
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This value indicates the emulated service to be carried over
+ this PW.
+ "
+ ::= { pwEntry 2 }
+
+pwOwner OBJECT-TYPE
+ SYNTAX INTEGER {
+ manual (1),
+ pwIdFecSignaling (2), -- PW signaling with PW ID FEC
+ genFecSignaling (3), -- Generalized attachment FEC
+ l2tpControlProtocol (4),
+ other (5)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is set by the operator to indicate the protocol
+ responsible for establishing this PW.
+ 'manual' is used in all cases where no maintenance
+ protocol (PW signaling) is used to set up the PW, i.e.,
+ configuration of entries in the PW tables including
+ PW labels, etc., is done by setting the MIB fields manually.
+ 'pwIdFecSignaling' is used in case of signaling with the
+ Pwid FEC element with LDP signaling.
+ 'genFecSignaling' is used in case of LDP signaling with
+ the generalized FEC.
+ 'l2tpControlProtocol' indicates the use of the L2TP
+ control protocol.
+ 'other' is used for other types of signaling."
+ ::= { pwEntry 3 }
+
+pwPsnType OBJECT-TYPE
+ SYNTAX IANAPwPsnTypeTC
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is set by the operator to indicate the PSN type.
+ Based on this object, the relevant PSN table's entry is
+ created in the PSN-specific MIB modules.
+ "
+ ::= { pwEntry 4 }
+
+pwSetUpPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object defines the relative priority of the PW
+ during set-up in a lowest-to-highest fashion, where 0
+ is the highest priority. PWs with the same priority
+ are treated with equal priority. PWs that have not yet
+
+ completed setup will report 'dormant' in the
+ pwOperStatus.
+ This value is significant if there are competing resources
+ among PWs and the implementation supports this feature.
+ Equal priority handling with competing resources is
+ implementation specific.
+ This object MAY be changed at any time."
+ DEFVAL { 0 }
+ ::= { pwEntry 5 }
+
+pwHoldingPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object defines the relative holding priority of the
+ PW in a lowest-to-highest fashion, where 0 is the highest
+ priority. PWs with the same priority are treated equally.
+ This value is significant if there are competing resources
+ among PWs and the implementation supports this feature.
+ Equal priority handling with competing resources is
+ implementation specific.
+ This object MAY be changed only if the PW is not active."
+ DEFVAL { 0 }
+ ::= { pwEntry 6 }
+
+pwPeerAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Denotes the address type of the peer node. It should be
+ set to 'unknown' if PE/PW maintenance protocol is not used
+ and the address is unknown."
+ DEFVAL { ipv4 }
+ ::= { pwEntry 8 }
+
+pwPeerAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object contains the value of the peer node address
+ of the PW/PE maintenance protocol entity. This object
+ SHOULD contain a value of all zeroes if not applicable
+ (pwPeerAddrType is 'unknown')."
+ ::= { pwEntry 9 }
+
+pwAttachedPwIndex OBJECT-TYPE
+ SYNTAX PwIndexOrZeroType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If the PW is attached to another PW instead of a local
+ native service, this item indicates the pwIndex of the
+ attached PW. Otherwise, this object MUST
+ be set to zero. Attachment to another PW will have no
+ PW specific entry in any of the service MIB modules."
+ DEFVAL { 0 }
+ ::= { pwEntry 10 }
+
+pwIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the ifIndex of the PW if the PW is
+ represented in the ifTable. Otherwise, it MUST be set
+ to zero."
+ DEFVAL { 0 }
+ ::= { pwEntry 11 }
+
+pwID OBJECT-TYPE
+ SYNTAX PwIDType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Pseudowire identifier.
+
+ If the pwOwner object is 'pwIdFecSignaling' or
+ 'l2tpControlProtocol', then this object is signaled in the
+ outgoing PW ID field within the 'Virtual Circuit FEC
+ Element'. For other values of pwOwner, this object is not
+ signaled and it MAY be set to zero.
+
+ For implementations that support the pwIndexMappingTable,
+ a non-zero value is RECOMMENDED, even if this
+ identifier is not signaled. This is so that reverse
+ mappings can be provided by pwIndexMappingTable and
+ pwPeerMappingTable. It is therefore RECOMMENDED that the
+ value of this pwID be unique (or if pwPeerAddrType is not
+ 'unknown', at least [pwType, pwID, pwPeerAddrType, pwPeerAddr]
+ is unique.)"
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 12 }
+
+pwLocalGroupID OBJECT-TYPE
+ SYNTAX PwGroupID
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Used in the Group ID field sent to the peer PW End Service
+ within the maintenance protocol used for PW setup.
+ It SHOULD be set to zero if a maintenance protocol is
+ not used."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 13 }
+
+pwGroupAttachmentID OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the attachment
+ group identifier (AGI) that this PW belongs to, which
+ typically identifies the VPN ID.
+ Applicable if pwOwner equals 'genFecSignaling'."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 14 }
+
+pwLocalAttachmentID OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the local
+ forwarder attachment individual identifier (AII) to be
+ used by this PW. It is used as the Source AII (SAII) for
+ outgoing signaling messages and the Target AII (TAII) in
+ the incoming messages from the peer. Applicable if
+ pwOwner equal 'genFecSignaling'."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 15 }
+
+pwRemoteAttachmentID OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the remote
+ forwarder attachment individual identifier (AII) to be
+ used by this PW. It is used as the TAII for outgoing
+ signaling messages and the SAII in the incoming messages
+ from the peer.
+ Applicable if pwOwner equals 'genFecSignaling'."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 16 }
+
+pwCwPreference OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines if the control word will be sent with each packet
+ by the local node. Some PW types mandate the use of a
+ control word, and in such cases, the value configured for
+ this object has no effect on the existence of the control
+ word.
+ This object MAY be changed only if the PW is not active."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol.', RFC 4447."
+ DEFVAL { false }
+ ::= { pwEntry 17 }
+
+pwLocalIfMtu OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If not equal to zero, the optional IfMtu object in the
+ signaling protocol will be sent with this value, which
+ represents the locally supported MTU size over the
+ interface (or the virtual interface) associated with the
+ PW.
+ This object MAY be changed only if the PW is not active."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ DEFVAL { 0 }
+ ::= { pwEntry 18 }
+
+pwLocalIfString OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A PW MAY be associated to an interface (or a virtual
+ interface) in the ifTable of the node as part of the
+ service configuration. This object defines if the
+ maintenance protocol will send the interface's name
+ (ifAlias) as it appears in the ifTable. If set to false,
+ the optional element will not be sent.
+ This object MAY be changed only if the PW is not active."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447, section 5.5."
+ DEFVAL { false }
+ ::= { pwEntry 19 }
+
+pwLocalCapabAdvert OBJECT-TYPE
+ SYNTAX IANAPwCapabilities
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If a maintenance protocol is used, it indicates the
+ capabilities the local node will advertise to the peer. The
+ operator MAY selectively assign a partial set of
+ capabilities. In case of manual configuration of the PW, the
+ operator SHOULD set non-conflicting options (for example,
+ only a single type of Operations, Administration, and
+ Management (OAM)) out of the available options in the
+ implementation. It is possible to change the value of
+ this object when the PW is not active. The agent MUST
+ reject any attempt to set a capability that is not
+ supported.
+
+ The default value MUST be the full set of local node
+ capabilities."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 20 }
+
+pwRemoteGroupID OBJECT-TYPE
+ SYNTAX PwGroupID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is obtained from the Group ID field as
+ received via the maintenance protocol used for PW setup.
+ Value of zero will be reported if not used.
+ Value of 0xFFFFFFFF shall be used if the object is yet to be
+ defined by the PW maintenance protocol."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 21 }
+
+pwCwStatus OBJECT-TYPE
+ SYNTAX PwCwStatusTC
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If signaling is used for PW establishment, this object
+ indicates the status of the control word negotiation.
+ For either signaling or manual configuration, it indicates
+ if the control word (CW) is to be present for this PW."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 22 }
+
+pwRemoteIfMtu OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote interface MTU as (optionally) received from the
+ remote node via the maintenance protocol. The object SHOULD
+ report zero if the MTU is not available."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 23 }
+
+pwRemoteIfString OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..80))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the interface description string as received by
+ the maintenance protocol. It MUST be a NULL string if a
+ maintenance protocol is not used or the value is not known
+ yet."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447, section 5.5."
+ ::= { pwEntry 24 }
+
+pwRemoteCapabilities OBJECT-TYPE
+ SYNTAX IANAPwCapabilities
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the capabilities as received from the peer."
+ REFERENCE
+ "Martini, et al, 'Pseudowire Setup and Maintenance using
+ the Label Distribution Protocol', RFC 4447."
+ ::= { pwEntry 25 }
+
+pwFragmentCfgSize OBJECT-TYPE
+ SYNTAX PwFragSize
+ UNITS "bytes"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If set to a value other than zero, indicates that
+ fragmentation is desired for this PW.
+ This object MAY be changed only if the PW is not active."
+ REFERENCE
+ "Malis A., Townsley M., 'PWE3 Fragmentation and Reassembly',
+ RFC 4623."
+ DEFVAL { 0 } -- i.e., fragmentation not desired
+ ::= { pwEntry 26 }
+
+pwRmtFragCapability OBJECT-TYPE
+ SYNTAX PwFragStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the fragmentation based on the local
+ configuration and the peer capabilities as received from
+ the peer when a control protocol is used."
+ REFERENCE
+ "Malis A., Townsley M., 'PWE3 Fragmentation and Reassembly',
+ RFC 4623."
+ ::= { pwEntry 27 }
+
+pwFcsRetentionCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ fcsRetentionDisable (1),
+ fcsRetentionEnable (2)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The local configuration of Frame Check Sequence (FCS)
+ retention for this PW. FCS retention can be configured for
+ PW types High-Level Data Link Control (HDLC), Point-to-Point
+ Protocol (PPP), and Ethernet only. If the implementation
+ does not support FCS retention, an error MUST be reported in
+ pwFcsRetentionStatus. This object MAY be changed only if
+ the PW is not active."
+ REFERENCE
+ "Malis A., et al., 'PWE3 Frame Check Sequence Retention',
+ RFC 4720."
+ DEFVAL { fcsRetentionDisable }
+ ::= { pwEntry 28 }
+
+pwFcsRetentionStatus OBJECT-TYPE
+ SYNTAX BITS {
+ remoteIndicationUnknown (0),
+ remoteRequestFcsRetention (1),
+ fcsRetentionEnabled (2),
+ fcsRetentionDisabled (3),
+ localFcsRetentionCfgErr (4),
+ fcsRetentionFcsSizeMismatch (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the FCS retention negotiation process based on
+ local configuration and the remote advertisement.
+
+ remoteIndicationUnknown - set if a FEC has not been received
+ from the remote.
+
+ remoteRequestFcsRetention - indicates that the peer has
+ requested FCS retention. FCS retention will be used if
+ the local node is capable and configured to use it for
+ this PW.
+
+ fcsRetentionEnabled - FCS retention is enabled (both peers
+ were configured for FCS retention for signaled PW, or the
+ local node is configured and capable of FCS retention for
+ manually assigned PWs).
+
+ fcsRetentionDisabled - FCS retention is disabled (not
+ configured locally or not advertised by the peer).
+
+ localFcsRetentionCfgErr - set if the local node has been
+ configured for FCS retention but is not capable to support
+ it.
+
+ fcsRetentionFcsSizeMismatch - set if there is an FCS size
+ mismatch between the local and the peer node.
+ "
+ REFERENCE
+ "Malis A., et al., 'PWE3 Frame Check Sequence Retention',
+ RFC 4720"
+ ::= { pwEntry 29 }
+
+pwOutboundLabel OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The PW label used in the outbound direction (i.e., toward
+ the PSN). It might be set manually if pwOwner is 'manual';
+ otherwise, it is set automatically.
+ For MPLS, MPLS over IP, or MPLS over Generic Routing
+ Encapsulation (GRE) PSN, it represents the 20-bit PW tag;
+ for L2TP, it represents the 32-bit Session ID; and for
+ IP PSN, it represents the destination UDP port number.
+ If the label is not yet known (signaling in process), the
+ object SHOULD return a value of 0xFFFFFFFF.
+ For manual configuration, this object MAY be changed only
+ if the PW is not active."
+ ::= { pwEntry 30 }
+
+pwInboundLabel OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The PW label used in the inbound direction (i.e., packets
+ received from the PSN). It may be set manually if pwOwner
+ is 'manual'; otherwise, it is set automatically.
+ For MPLS, MPLS over IP, or MPLS over GRE PSN, it represents
+ the 20-bit PW tag; for L2TP, it represents the 32-bit
+ Session ID; and for IP PSN, it represents the source
+ UDP port number.
+ If the label is not yet known (signaling in process), the
+ object SHOULD return a value of 0xFFFFFFFF.
+ For manual configuration, this object MAY be changed only
+ if the PW is not active."
+ ::= { pwEntry 31 }
+
+pwName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The canonical name assigned to the PW. This object MAY be
+ changed at any time."
+ ::= { pwEntry 32 }
+
+pwDescr OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A textual string containing information about the PW.
+ If there is no description, this object contains a zero-
+ length string. This object MAY be changed at any time."
+ ::= { pwEntry 33 }
+
+pwCreateTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this PW was created."
+ ::= { pwEntry 34 }
+
+pwUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the time since last change of pwOperStatus to
+ Up(1)."
+ ::= { pwEntry 35 }
+
+pwLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time the PW entered
+ its current operational state. If the current state was
+ entered prior to the last re-initialization of the local
+ network management subsystem, then this object contains a
+ zero value."
+ ::= { pwEntry 36 }
+
+pwAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1), -- ready to pass packets
+ down(2),
+ testing(3) -- in a test mode
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The desired operational status of this PW. This object MAY
+ be set at any time."
+ ::= { pwEntry 37 }
+
+pwOperStatus OBJECT-TYPE
+ SYNTAX PwOperStatusTC
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the operational status of the PW; it
+ does not reflect the status of the Customer Edge (CE) bound
+ interface. It is set to down only if pwNotForwarding,
+ psnFacingPwRxFault, or psnFacingPwTxFault indications are
+ set in pwLocalStatus or pwRemoteStatus.
+ It indicates 'lowerLayerDown' if the only reason for
+ not being in the 'up' state is that either the outer tunnel
+ or physical layer of the network side is in the 'down'
+ state.
+ All other states are declared based on the description
+ of the PwOperStatusTC.
+ "
+ ::= { pwEntry 38 }
+
+pwLocalStatus OBJECT-TYPE
+ SYNTAX PwStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the status of the PW in the local node.
+ The various indications in this object SHOULD be
+ available independent of the ability of the local node to
+ advertise them or the remote node to accept these status
+ indications through the control protocol.
+ "
+ ::= { pwEntry 39 }
+
+pwRemoteStatusCapable OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (1),
+ notYetKnown (2),
+ remoteCapable (3),
+ remoteNotCapable (4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the remote node capability to advertise the
+ PW status notification.
+ notApplicable SHOULD be reported for a manually set PW, or
+ if the local node is not capable of accepting the status
+ notification object.
+ notYetKnown SHOULD be reported if the signaling protocol
+ has not yet finished the process of capability
+ determination.
+ remoteCapable and remoteNotcapable SHOULD be reported
+ based on the initial signaling exchange that has
+ determined the remote node capability.
+ "
+ ::= { pwEntry 40 }
+
+pwRemoteStatus OBJECT-TYPE
+ SYNTAX PwStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the status of the PW as was advertised by the
+ remote. If the remote is not capable of advertising the
+ status object, or the local node is not able to accept
+ the status object through signaling, then the applicable
+ bit is 'pwNotForwarding', which is set if the remote has
+ sent label release or label withdraw for this PW.
+ "
+ ::= { pwEntry 41 }
+
+pwTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds, including partial seconds,
+ that have elapsed since the beginning of the current
+ interval measurement period."
+ ::= { pwEntry 42 }
+
+pwValidIntervals OBJECT-TYPE
+ SYNTAX HCPerfValidIntervals
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of previous 15-minute intervals
+ for which data was collected."
+ ::= { pwEntry 43 }
+
+pwRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "For creating, modifying, and deleting this row.
+ This object MAY be changed at any time."
+ ::= { pwEntry 44 }
+
+pwStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the storage type for this
+ object."
+ DEFVAL { nonVolatile }
+ ::= { pwEntry 45 }
+
+pwOamEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if OAM is enabled for this
+ PW. It MAY be changed at any time."
+ DEFVAL { true }
+ ::= { pwEntry 46 }
+
+pwGenAGIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the AGI type if generalized FEC
+ (129) is used for PW signaling or configuration. It SHOULD
+ return the value of zero otherwise."
+ DEFVAL { 0 }
+ ::= { pwEntry 47 }
+
+pwGenLocalAIIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is the type of the local forwarder
+ attachment individual identifier (AII) to be used
+ by this PW if generalized FEC (129) is used for PW
+ signaling or configuration."
+ DEFVAL { 0 }
+ ::= { pwEntry 48 }
+
+pwGenRemoteAIIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is the type of the remote forwarder
+ attachment individual identifier (AII) to be used
+ by this PW if generalized FEC (129) is used for PW
+ signaling or configuration."
+ DEFVAL { 0 }
+ ::= { pwEntry 49 }
+
+-- End of the PW Virtual Connection Table
+
+-- PW Performance Table
+
+pwPerfCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwPerfCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides per-PW performance information for
+ the current interval."
+ ::= { pwObjects 3 }
+
+pwPerfCurrentEntry OBJECT-TYPE
+ SYNTAX PwPerfCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created by the agent for
+ every PW."
+ INDEX { pwIndex }
+ ::= { pwPerfCurrentTable 1 }
+
+PwPerfCurrentEntry ::= SEQUENCE {
+ pwPerfCurrentInHCPackets HCPerfCurrentCount,
+ pwPerfCurrentInHCBytes HCPerfCurrentCount,
+ pwPerfCurrentOutHCPackets HCPerfCurrentCount,
+ pwPerfCurrentOutHCBytes HCPerfCurrentCount,
+ pwPerfCurrentInPackets PerfCurrentCount,
+ pwPerfCurrentInBytes PerfCurrentCount,
+ pwPerfCurrentOutPackets PerfCurrentCount,
+ pwPerfCurrentOutBytes PerfCurrentCount
+ }
+
+pwPerfCurrentInHCPackets OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of packets received by
+ the PW (from the PSN) in the current 15-minute
+ interval. This is the 64-bit version of
+ pwPerfCurrentInPackets, if pwPerfCurrentInHCPackets
+ is supported according to the rules spelled out
+ in RFC 2863."
+ ::= { pwPerfCurrentEntry 1 }
+
+pwPerfCurrentInHCBytes OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of bytes received by the
+ PW (from the PSN) in the current 15-minute interval.
+ This is the 64-bit version of pwPerfCurrentInBytes, if
+ pwPerfCurrentInHCBytes is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 2 }
+
+pwPerfCurrentOutHCPackets OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of packets forwarded by
+ the PW (to the PSN) in the current 15-minute interval.
+ This is the 64-bit version of pwPerfCurrentOutPackets,
+ if pwPerfCurrentOutHCPackets is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 3 }
+
+pwPerfCurrentOutHCBytes OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of bytes forwarded by
+ the PW (to the PSN) in the current 15-minute interval.
+ This is the 64-bit version of pwPerfCurrentOutBytes,
+ if pwPerfCurrentOutHCBytes is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 4 }
+
+pwPerfCurrentInPackets OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter for number of packets received by the PW (from
+ the PSN) in the current 15-minute interval.
+ This is the 32-bit version of pwPerfCurrentInHCPackets,
+ if pwPerfCurrentInHCPackets is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 5 }
+
+pwPerfCurrentInBytes OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter for number of bytes received by the
+ PW (from the PSN) in the current 15-minute interval.
+ It MUST be equal to the least significant 32 bits of
+ pwPerfCurrentInHCBytes, if pwPerfCurrentInHCBytes is
+ supported according to the rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 6 }
+
+pwPerfCurrentOutPackets OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter for number of packets forwarded by
+ the PW (to the PSN) in the current 15-minute interval.
+ It MUST be equal to the least significant 32 bits of
+ pwPerfCurrentOutHCPackets, if
+ pwPerfCurrentOutHCPackets is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 7 }
+
+pwPerfCurrentOutBytes OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter for number of bytes forwarded by
+ the PW (to the PSN) in the current 15-minute interval.
+ It MUST be equal to the least significant 32 bits of
+ pwPerfCurrentOutHCBytes, if pwPerfCurrentOutHCBytes is
+ supported according to the rules spelled out in RFC 2863."
+ ::= { pwPerfCurrentEntry 8 }
+
+-- End of the PW Performance Current Table
+
+-- PW Performance Interval Table
+
+pwPerfIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwPerfIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides per-PW performance information for
+ each interval."
+ ::= { pwObjects 4 }
+
+pwPerfIntervalEntry OBJECT-TYPE
+ SYNTAX PwPerfIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created by the agent for every
+ PW."
+ INDEX { pwIndex, pwPerfIntervalNumber }
+ ::= { pwPerfIntervalTable 1 }
+
+PwPerfIntervalEntry ::= SEQUENCE {
+ pwPerfIntervalNumber Integer32,
+ pwPerfIntervalValidData TruthValue,
+ pwPerfIntervalTimeElapsed HCPerfTimeElapsed,
+ pwPerfIntervalInHCPackets HCPerfIntervalCount,
+ pwPerfIntervalInHCBytes HCPerfIntervalCount,
+ pwPerfIntervalOutHCPackets HCPerfIntervalCount,
+ pwPerfIntervalOutHCBytes HCPerfIntervalCount,
+ pwPerfIntervalInPackets PerfIntervalCount,
+ pwPerfIntervalInBytes PerfIntervalCount,
+ pwPerfIntervalOutPackets PerfIntervalCount,
+ pwPerfIntervalOutBytes PerfIntervalCount
+ }
+
+pwPerfIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number N, between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15-minute interval, and the interval identified
+ by N is the interval immediately preceding the one
+ identified by N-1.
+ The minimum range of N is 1 through 4. The default range
+ is 1 to 32. The maximum range of N is 1 through 96."
+ REFERENCE
+ "Tesink, K. 'Definitions of Managed Objects for the
+ SONET/SDH Interface Type', RFC 2558"
+ ::= { pwPerfIntervalEntry 1 }
+
+pwPerfIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval
+ is valid."
+ ::= { pwPerfIntervalEntry 2 }
+
+pwPerfIntervalTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The duration of this interval in seconds."
+ ::= { pwPerfIntervalEntry 3 }
+
+pwPerfIntervalInHCPackets OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of packets received by
+ the PW (from the PSN) during the interval. This is the
+ 64-bit version of pwPerfIntervalInPackets, if
+ pwPerfIntervalInHCPackets is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 4 }
+
+pwPerfIntervalInHCBytes OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of bytes received by the
+ PW (from the PSN) during the interval.
+ This is the 64-bit version of pwPerfIntervalInBytes, if
+ pwPerfIntervalInHCBytes is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 5 }
+
+pwPerfIntervalOutHCPackets OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of packets forwarded by
+ the PW (to the PSN) during the interval.
+ This is the 64-bit version of pwPerfIntervalOutPackets,
+ if pwPerfIntervalOutHCPackets is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 6 }
+
+pwPerfIntervalOutHCBytes OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for number of bytes forwarded by
+ the PW (to the PSN) during the interval.
+ This is the 64-bit version of pwPerfIntervalOutBytes,
+ if pwPerfIntervalOutHCBytes is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 7 }
+
+pwPerfIntervalInPackets OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value represents the number of packets received
+ by this PW during the interval.
+ It MUST be equal to the least significant 32 bits of
+ pwPerfIntervalInHCPackets, if pwPerfIntervalInHCPackets
+ is supported according to the rules spelled out in
+ RFC 2863."
+ ::= { pwPerfIntervalEntry 8 }
+
+pwPerfIntervalInBytes OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value represents the number of bytes received by
+ this PW during the interval. It MUST be equal to the
+ least significant 32 bits of pwPerfIntervalInHCBytes, if
+ pwPerfIntervalInHCBytes is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 9 }
+
+pwPerfIntervalOutPackets OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value represents the number of packets sent by this
+ PW during the interval.
+ It MUST be equal to the least significant 32 bits of
+ pwPerfIntervalOutHCPackets, if
+ pwPerfIntervalOutHCPackets is supported according to the
+ rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 10 }
+
+pwPerfIntervalOutBytes OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value represents the number of bytes sent by this
+ PW during the interval.
+ It MUST be equal to the least significant 32
+ bits of pwPerfIntervalOutHCBytes,
+ if pwPerfIntervalOutHCBytes is supported according to
+ the rules spelled out in RFC 2863."
+ ::= { pwPerfIntervalEntry 11 }
+
+-- End of the PW Performance Interval Table
+
+-- PW Performance 1-day Interval Table
+
+pwPerf1DayIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwPerf1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides per-PW performance information for
+ the current day's measurement and the previous day's
+
+ interval."
+ ::= { pwObjects 5 }
+
+pwPerf1DayIntervalEntry OBJECT-TYPE
+ SYNTAX PwPerf1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created by the agent for every
+ PW."
+ INDEX { pwIndex, pwPerf1DayIntervalNumber }
+ ::= { pwPerf1DayIntervalTable 1 }
+
+PwPerf1DayIntervalEntry ::= SEQUENCE {
+ pwPerf1DayIntervalNumber Unsigned32,
+ pwPerf1DayIntervalValidData TruthValue,
+ pwPerf1DayIntervalTimeElapsed HCPerfTimeElapsed,
+ pwPerf1DayIntervalInHCPackets Counter64,
+ pwPerf1DayIntervalInHCBytes Counter64,
+ pwPerf1DayIntervalOutHCPackets Counter64,
+ pwPerf1DayIntervalOutHCBytes Counter64
+ }
+
+pwPerf1DayIntervalNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "History Data Interval number. Interval 1 is the current day's
+ measurement period, interval 2 is the most recent previous
+ day, and interval 30 is 31 days ago. Intervals 3..31 are
+ optional."
+ ::= { pwPerf1DayIntervalEntry 1 }
+
+pwPerf1DayIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval
+ is valid."
+ ::= { pwPerf1DayIntervalEntry 2 }
+
+pwPerf1DayIntervalTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds in the 1-day interval over which the
+ performance monitoring information is actually counted.
+ This value will be the same as the interval duration except
+ in a situation where performance monitoring data could not
+ be collected for any reason or where agent clock adjustments
+ have been made."
+ ::= { pwPerf1DayIntervalEntry 3 }
+
+pwPerf1DayIntervalInHCPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for the total number of packets
+ received by the PW (from the PSN)."
+ ::= { pwPerf1DayIntervalEntry 4 }
+
+pwPerf1DayIntervalInHCBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for the total number of bytes
+ received by the PW (from the PSN)."
+ ::= { pwPerf1DayIntervalEntry 5 }
+
+pwPerf1DayIntervalOutHCPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for the total number of packets
+ forwarded by the PW (to the PSN)."
+ ::= { pwPerf1DayIntervalEntry 6 }
+
+pwPerf1DayIntervalOutHCBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "High-capacity counter for the total number of bytes
+ forwarded by the PW (to the PSN)."
+ ::= { pwPerf1DayIntervalEntry 7 }
+
+-- End of the PW Performance 1-day Interval Table
+
+-- Error counter scalar
+
+pwPerfTotalErrorPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of errors at the PW processing level,
+ for example, packets received with unknown PW label."
+ ::= { pwObjects 6 }
+
+-- Reverse mapping tables
+
+-- The PW ID mapping table
+pwIndexMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table enables the reverse mapping of the unique
+ PWid parameters [peer IP, PW type, and PW ID] and the
+ pwIndex. The table is not applicable for PWs created
+ manually or by using the generalized FEC."
+ ::= { pwObjects 7 }
+
+pwIndexMappingEntry OBJECT-TYPE
+ SYNTAX PwIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table MUST be created by the agent for
+ every PW created by the pwTable for which pwOwner
+ equals pwIdFecSignaling and pwID is not zero.
+
+ Implementers need to be aware that if the value of
+ the pwIndexMappingPeerAddr (an OID) has more than
+ 113 sub-identifiers, then OIDs of column instances
+ in this table will have more than 128 sub-identifiers
+ and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+ INDEX { pwIndexMappingPwType, pwIndexMappingPwID,
+ pwIndexMappingPeerAddrType, pwIndexMappingPeerAddr
+ }
+ ::= { pwIndexMappingTable 1 }
+
+PwIndexMappingEntry ::= SEQUENCE {
+ pwIndexMappingPwType IANAPwTypeTC,
+ pwIndexMappingPwID PwIDType,
+ pwIndexMappingPeerAddrType InetAddressType,
+ pwIndexMappingPeerAddr InetAddress,
+ pwIndexMappingPwIndex PwIndexType
+ }
+
+pwIndexMappingPwType OBJECT-TYPE
+ SYNTAX IANAPwTypeTC
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PW type (indicates the service) of this PW."
+ ::= { pwIndexMappingEntry 1 }
+
+pwIndexMappingPwID OBJECT-TYPE
+ SYNTAX PwIDType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PW ID of this PW. Zero if the PW is configured
+ manually."
+ ::= { pwIndexMappingEntry 2 }
+
+pwIndexMappingPeerAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP address type of the peer node."
+ ::= { pwIndexMappingEntry 3 }
+
+pwIndexMappingPeerAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP address of the peer node."
+ ::= { pwIndexMappingEntry 4 }
+
+pwIndexMappingPwIndex OBJECT-TYPE
+ SYNTAX PwIndexType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value that represents the PW in the pwTable."
+ ::= { pwIndexMappingEntry 5 }
+
+-- End of the PW ID mapping table
+
+-- The peer mapping table
+
+pwPeerMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwPeerMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides reverse mapping of the existing PW
+ based on PW type and PW ID ordering. This table is
+ typically useful for the element management system (EMS)
+ ordered query of existing PWs."
+ ::= { pwObjects 8 }
+
+pwPeerMappingEntry OBJECT-TYPE
+ SYNTAX PwPeerMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created by the agent for every
+ PW entry in the pwTable.
+
+ Implementers need to be aware that if the value of the
+ pwPeerMappingPeerAddr (an OID) has more than 113
+ sub-identifiers, then OIDs of column instances in this
+ table will have more than 128 sub-identifiers and cannot
+ be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+ INDEX { pwPeerMappingPeerAddrType, pwPeerMappingPeerAddr,
+ pwPeerMappingPwType, pwPeerMappingPwID }
+ ::= { pwPeerMappingTable 1 }
+
+PwPeerMappingEntry ::= SEQUENCE {
+ pwPeerMappingPeerAddrType InetAddressType,
+ pwPeerMappingPeerAddr InetAddress,
+ pwPeerMappingPwType IANAPwTypeTC,
+ pwPeerMappingPwID PwIDType,
+ pwPeerMappingPwIndex PwIndexType
+ }
+
+pwPeerMappingPeerAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP address type of the peer node."
+ ::= { pwPeerMappingEntry 1 }
+
+pwPeerMappingPeerAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP address of the peer node."
+ ::= { pwPeerMappingEntry 2 }
+
+pwPeerMappingPwType OBJECT-TYPE
+ SYNTAX IANAPwTypeTC
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PW type (indicates the emulated service) of this PW."
+ ::= { pwPeerMappingEntry 3 }
+
+pwPeerMappingPwID OBJECT-TYPE
+ SYNTAX PwIDType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PW ID of this PW. Zero if the PW is configured
+ manually."
+ ::= { pwPeerMappingEntry 4 }
+
+pwPeerMappingPwIndex OBJECT-TYPE
+ SYNTAX PwIndexType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value that represents the PW in the pwTable."
+ ::= { pwPeerMappingEntry 5 }
+
+-- End of the peer mapping table
+
+-- End of the reverse mapping tables
+
+pwUpDownNotifEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If this object is set to true(1), then it enables
+ the emission of pwUp and pwDown
+ notifications; otherwise, these notifications are not
+ emitted."
+ REFERENCE
+ "See also [RFC3413] for explanation that
+ notifications are under the ultimate control of the
+ MIB module in this document."
+ DEFVAL { false }
+ ::= { pwObjects 9 }
+
+pwDeletedNotifEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If this object is set to true(1), then it enables the
+ emission of pwDeleted notification; otherwise, this
+ notification is not emitted."
+ REFERENCE
+ "See also [RFC3413] for explanation that
+ notifications are under the ultimate control of the
+ MIB module in this document."
+ DEFVAL { false }
+ ::= { pwObjects 10 }
+
+pwNotifRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object defines the maximum number of PW notifications
+ that can be emitted from the device per second."
+ ::= { pwObjects 11 }
+
+-- The Gen Fec PW ID mapping table
+
+pwGenFecIndexMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PwGenFecIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table enables the reverse mapping of the unique
+ PWid parameters [GroupAttachmentID, LocalAttachmentID,
+ and PeerAttachmentID] and the pwIndex. The table is
+ only applicable for PW using the generalized FEC."
+ ::= { pwObjects 12 }
+
+pwGenFecIndexMappingEntry OBJECT-TYPE
+ SYNTAX PwGenFecIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table MUST be created by the agent for
+ every PW created by the pwTable for which pwOwner
+ equals genFecSignaling.
+
+ Implementers need to be aware that if the combined value
+ of pwGenFecIndexMappingAGI, pwGenFecIndexMappingLocalAII,
+ and pwGenFecIndexMappingRemoteAII (OIDs) has more than
+ 113 sub-identifiers, then OIDs of column instances
+ in this table will have more than 128 sub-identifiers
+ and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+ INDEX { pwGenFecIndexMappingAGIType,
+ pwGenFecIndexMappingAGI,
+ pwGenFecIndexMappingLocalAIIType,
+ pwGenFecIndexMappingLocalAII,
+ pwGenFecIndexMappingRemoteAIIType,
+ pwGenFecIndexMappingRemoteAII
+ }
+ ::= { pwGenFecIndexMappingTable 1 }
+
+PwGenFecIndexMappingEntry ::= SEQUENCE {
+ pwGenFecIndexMappingAGIType PwGenIdType,
+ pwGenFecIndexMappingAGI PwAttachmentIdentifierType,
+ pwGenFecIndexMappingLocalAIIType PwGenIdType,
+ pwGenFecIndexMappingLocalAII PwAttachmentIdentifierType,
+ pwGenFecIndexMappingRemoteAIIType PwGenIdType,
+ pwGenFecIndexMappingRemoteAII PwAttachmentIdentifierType,
+ pwGenFecIndexMappingPwIndex PwIndexType
+}
+
+pwGenFecIndexMappingAGIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is the type of the attachment
+ group identifier (AGI) that this PW belongs to."
+ ::= { pwGenFecIndexMappingEntry 1 }
+
+pwGenFecIndexMappingAGI OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the attachment
+ group identifier (AGI) that this PW belongs to,
+ which typically identifies the VPN ID."
+ ::= { pwGenFecIndexMappingEntry 2 }
+
+pwGenFecIndexMappingLocalAIIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is the type of the local forwarder
+ attachment individual identifier (AII) to be used
+ by this PW."
+ ::= { pwGenFecIndexMappingEntry 3 }
+
+pwGenFecIndexMappingLocalAII OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the local
+ forwarder attachment individual identifier (AII) to be used
+ by this PW. It is used as the SAII for outgoing signaling
+ messages and the TAII in the incoming messages from the
+ peer."
+ ::= { pwGenFecIndexMappingEntry 4 }
+
+pwGenFecIndexMappingRemoteAIIType OBJECT-TYPE
+ SYNTAX PwGenIdType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is the type of the remote forwarder
+ attachment individual identifier (AII) to be used
+ by this PW."
+ ::= { pwGenFecIndexMappingEntry 5 }
+
+pwGenFecIndexMappingRemoteAII OBJECT-TYPE
+ SYNTAX PwAttachmentIdentifierType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is an octet string representing the peer
+ forwarder attachment individual identifier (AII) to be used
+ by this PW. It is used as the TAII for outgoing signaling
+ messages and the SAII in the incoming messages from the
+ peer."
+ ::= { pwGenFecIndexMappingEntry 6 }
+
+pwGenFecIndexMappingPwIndex OBJECT-TYPE
+ SYNTAX PwIndexType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value that represents the PW in the pwTable."
+ ::= { pwGenFecIndexMappingEntry 7 }
+
+-- End of the Gen Fec PW ID mapping table
+
+-- Notifications - PW
+
+pwDown NOTIFICATION-TYPE
+ OBJECTS { pwOperStatus, --start of range
+ pwOperStatus --end of range
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the pwOperStatus
+ object for one or more contiguous entries in the pwTable are
+ about to enter the down(2) or lowerLayerDown(6) state from
+ any other state, except for transition from the
+ notPresent(5) state. For the purpose of deciding when
+ these notifications occur, the lowerLayerDown(6) state
+ and the down(2) state are considered to be equivalent;
+ i.e., there is no notification on transition from
+ lowerLayerDown(6) into down(2), and there is a trap on
+ transition from any other state except down(2) (and
+ notPresent) into lowerLayerDown(6).
+
+ The included values of pwOperStatus MUST each be equal to
+ down(2) or lowerLayerDown(6). The two instances of
+ pwOperStatus in this notification indicate the range of
+ indexes that are affected. Note that all the indexes of
+ the two ends of the range can be derived from the
+ instance identifiers of these two objects. For cases
+ where a contiguous range of cross-connects have
+ transitioned into the down(2) and lowerLayerDown(6) states
+ at roughly the same time, the device SHOULD issue a single
+ notification for each range of contiguous indexes in an
+ effort to minimize the emission of a large number of
+ notifications. If a notification has to be issued for
+ just a single cross-connect entry, then the instance
+ identifier (and values) of the two pwOperStatus objects
+ MUST be identical."
+ ::= { pwNotifications 1 }
+
+pwUp NOTIFICATION-TYPE
+ OBJECTS { pwOperStatus, --start of range
+ pwOperStatus --end of range
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the pwOperStatus
+ object for one or more contiguous entries in the pwTable are
+ about to enter the up(1) state from some other state
+
+ except the notPresent(5) state and given that the pwDown
+ notification been issued for these entries. The included
+ values of pwOperStatus MUST both be set equal to this
+ new state (i.e., up(1)). The two instances of pwOperStatus
+ in this notification indicate the range of indexes that
+ are affected. Note that all the indexes of the two ends
+ of the range can be derived from the instance identifiers
+ of these two objects. For cases where a contiguous range
+ of cross-connects have transitioned into the up(1) state
+ at roughly the same time, the device SHOULD issue a single
+ notification for each range of contiguous indexes in an
+ effort to minimize the emission of a large number of
+ notifications. If a notification has to be issued for
+ just a single cross-connect entry, then the instance
+ identifier (and values) of the two pwOperStatus objects
+ MUST be identical."
+ ::= { pwNotifications 2 }
+
+pwDeleted NOTIFICATION-TYPE
+ OBJECTS { pwType,
+ pwID,
+ pwPeerAddrType,
+ pwPeerAddr
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the PW has been
+ deleted, i.e., when the pwRowStatus has been set to
+ destroy(6) or the PW has been deleted by a non-MIB
+ application or due to an auto-discovery process.
+ "
+ ::= { pwNotifications 3 }
+
+-- End of notifications.
+
+-- Conformance information
+
+pwGroups OBJECT IDENTIFIER ::= { pwConformance 1 }
+pwCompliances OBJECT IDENTIFIER ::= { pwConformance 2 }
+
+-- Compliance requirement for fully compliant implementations
+
+pwModuleFullCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for agents that provide full
+ support for the PW MIB module. Such devices can
+ then be monitored and configured using
+
+ this MIB module."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { pwBasicGroup,
+ pwPerformanceGeneralGroup
+ }
+
+ GROUP pwNotificationGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that can efficiently implement the notifications
+ contained in this group.
+ "
+
+ GROUP pwPwIdGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW ID FEC.
+ "
+
+ GROUP pwGeneralizedFecGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the generalized PW FEC.
+ "
+
+ GROUP pwFcsGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support FCS retention."
+
+ GROUP pwFragGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW fragmentation.
+ "
+
+ GROUP pwPwStatusGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW status notification.
+ "
+
+ GROUP pwGetNextGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ where the pwIndex may be any arbitrary value
+ and the EMS would require retrieval of the next
+ free index."
+
+ GROUP pwPriorityGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the controlling the PW setup and
+ holding priority."
+
+ GROUP pwAttachmentGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support attachment of two PWs (PW stitching)."
+
+ GROUP pwPeformance1DayIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 1-day
+ intervals."
+
+ GROUP pwPerformanceIntervalGeneralGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 15-
+ minute intervals."
+
+ GROUP pwPeformanceIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 15-
+ minute intervals."
+
+ GROUP pwHCPeformanceIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ where at least one of the interval performance
+ counters wraps around too quickly based on the
+ criteria specified in RFC 2863 for high-capacity
+ counters."
+
+ GROUP pwMappingTablesGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support reverse mapping of PW indexes to
+ the pwIndex and the peer mapping table."
+
+ GROUP pwSignalingGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW signaling."
+
+ GROUP pwNotificationControlGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW notifications."
+
+ OBJECT pwAdminStatus
+ SYNTAX INTEGER { up(1), down(2) }
+ DESCRIPTION "Support of the value testing(3) is not
+ required."
+
+ OBJECT pwOperStatus
+ SYNTAX INTEGER { up(1), down(2), notPresent(5),
+ lowerLayerDown(6) }
+ DESCRIPTION "Support of the values testing(3) and dormant(4)
+
+ is not required."
+
+ OBJECT pwRowStatus
+ SYNTAX RowStatus { active(1), notInService(2),
+ notReady(3) }
+ WRITE-SYNTAX RowStatus { active(1), notInService(2),
+ createAndGo(4), destroy(6)
+ }
+ DESCRIPTION "Support for createAndWait is not required. Support
+ of notReady is not required for implementations
+ that do not support signaling, or if it is
+ guaranteed that the conceptual row has all the
+ required information to create the PW when the
+ row has been created by the agent or written by
+ the operator."
+
+ OBJECT pwPeerAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1) }
+ MIN-ACCESS read-only
+ DESCRIPTION "Only unknown(0) and ipv4(1) are required.
+ Implementations that support only IPv4 MAY support
+ read-only access."
+
+ OBJECT pwPeerAddr
+ SYNTAX InetAddress (SIZE(0|4))
+ DESCRIPTION "An implementation is only required to support
+ 0, 4 address sizes."
+
+ OBJECT pwStorageType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwNotifRate
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+ ::= { pwCompliances 1 }
+
+-- Compliance requirement for read-only compliant implementations
+
+pwModuleReadOnlyCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for agents that provide read-
+ only support for the PW MIB module. Such devices can
+ then be monitored but cannot be configured using this
+ MIB module."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { pwBasicGroup
+ }
+
+ GROUP pwNotificationGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that can efficiently implement the notifications
+ contained in this group."
+
+ GROUP pwPwIdGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW ID FEC.
+ "
+
+ GROUP pwGeneralizedFecGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the generalized PW FEC.
+ "
+
+ GROUP pwFcsGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support FCS retention."
+
+ GROUP pwFragGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW fragmentation.
+ "
+
+ GROUP pwPwStatusGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW status notification.
+ "
+
+ GROUP pwGetNextGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ where the pwIndex may be any arbitrary value
+ and the EMS would require retrieval of the next
+ free index."
+
+ GROUP pwPriorityGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the controlling the PW setup and
+ holding priority."
+
+ GROUP pwAttachmentGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support attachment of two PWs (PW stitching)."
+
+ GROUP pwPeformance1DayIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 1-day
+ intervals."
+
+ GROUP pwPerformanceIntervalGeneralGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 15-
+ minute intervals."
+
+ GROUP pwPeformanceIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support PW performance gathering in 15-
+ minute intervals."
+
+ GROUP pwHCPeformanceIntervalGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ where at least one of the interval performance
+ counters wraps around too quickly based on the
+ criteria specified in RFC 2863 for high-capacity
+ counters."
+
+ GROUP pwMappingTablesGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support reverse mapping of PW indexes to
+ the pwIndex and the peer mapping table."
+
+ GROUP pwSignalingGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW signaling."
+
+ GROUP pwNotificationControlGroup
+ DESCRIPTION "This group is only mandatory for implementations
+ that support the PW notifications."
+
+ OBJECT pwType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwOwner
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwPsnType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwSetUpPriority
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwHoldingPriority
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwPeerAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1) }
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required. Only unknown(0) and
+ ipv4(1) are required."
+
+ OBJECT pwPeerAddr
+ SYNTAX InetAddress (SIZE(0|4))
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required. An implementation
+ is only required to support 0, 4 address sizes."
+
+ OBJECT pwAttachedPwIndex
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwIfIndex
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwID
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwLocalGroupID
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwGroupAttachmentID
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwLocalAttachmentID
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwRemoteAttachmentID
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwCwPreference
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwLocalIfMtu
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwLocalIfString
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwLocalCapabAdvert
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwFragmentCfgSize
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwFcsRetentionCfg
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwOutboundLabel
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwInboundLabel
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwName
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwDescr
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwAdminStatus
+ SYNTAX INTEGER { up(1), down(2) }
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required. The support of value
+ testing(3) is not required."
+
+ OBJECT pwOperStatus
+ SYNTAX INTEGER { up(1), down(2), notPresent(5),
+ lowerLayerDown(6) }
+ DESCRIPTION "The support of the values testing(3) and dormant(4)
+ is not required."
+
+ OBJECT pwRowStatus
+ SYNTAX RowStatus { active(1) }
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwStorageType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwOamEnable
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwGenAGIType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwGenLocalAIIType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwGenRemoteAIIType
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwUpDownNotifEnable
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwDeletedNotifEnable
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+
+ OBJECT pwNotifRate
+ MIN-ACCESS read-only
+ DESCRIPTION "Write access is not required."
+ ::= { pwCompliances 2 }
+
+-- Units of conformance.
+
+pwBasicGroup OBJECT-GROUP
+ OBJECTS {
+ pwType,
+ pwOwner,
+ pwPsnType,
+ pwIfIndex,
+ pwCwPreference,
+ pwLocalIfMtu,
+ pwOutboundLabel,
+ pwInboundLabel,
+ pwName,
+ pwDescr,
+ pwCreateTime,
+ pwUpTime,
+ pwLastChange,
+ pwAdminStatus,
+ pwOperStatus,
+ pwLocalStatus,
+ pwRowStatus,
+ pwStorageType,
+ pwOamEnable
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects that are required in all
+ implementations that support the PW MIB module."
+ ::= { pwGroups 1 }
+
+pwPwIdGroup OBJECT-GROUP
+ OBJECTS {
+ pwID
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects required for PW ID configuration
+ and signaling."
+ ::= { pwGroups 2 }
+
+pwGeneralizedFecGroup OBJECT-GROUP
+ OBJECTS {
+ pwGroupAttachmentID,
+ pwLocalAttachmentID,
+ pwRemoteAttachmentID,
+ pwGenAGIType,
+ pwGenLocalAIIType,
+ pwGenRemoteAIIType
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects required for generalized FEC
+
+ configuration and signaling."
+ ::= { pwGroups 3 }
+
+pwFcsGroup OBJECT-GROUP
+ OBJECTS {
+ pwFcsRetentionCfg,
+ pwFcsRetentionStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects required for FCS retention
+ configuration and signaling."
+ ::= { pwGroups 4 }
+
+pwFragGroup OBJECT-GROUP
+ OBJECTS {
+ pwFragmentCfgSize,
+ pwRmtFragCapability
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects required for fragmentation
+ configuration and signaling."
+ ::= { pwGroups 5 }
+
+pwPwStatusGroup OBJECT-GROUP
+ OBJECTS {
+ pwRemoteCapabilities,
+ pwRemoteStatusCapable,
+ pwRemoteStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects required for PW status configuration
+ and signaling."
+ ::= { pwGroups 6 }
+
+pwGetNextGroup OBJECT-GROUP
+ OBJECTS {
+ pwIndexNext
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for getting the next available
+
+ index."
+ ::= { pwGroups 7 }
+
+pwPriorityGroup OBJECT-GROUP
+ OBJECTS {
+ pwSetUpPriority,
+ pwHoldingPriority
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for controlling the PW setup and
+ holding priority."
+ ::= { pwGroups 8 }
+
+pwAttachmentGroup OBJECT-GROUP
+ OBJECTS {
+ pwAttachedPwIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for PW configuration as ifIndex."
+ ::= { pwGroups 9 }
+
+pwPerformanceGeneralGroup OBJECT-GROUP
+ OBJECTS {
+ pwPerfTotalErrorPackets
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of general objects needed for managing the
+ total running performance parameters."
+ ::= { pwGroups 10 }
+
+pwPeformance1DayIntervalGroup OBJECT-GROUP
+ OBJECTS {
+ pwPerf1DayIntervalValidData,
+ pwPerf1DayIntervalTimeElapsed,
+ pwPerf1DayIntervalInHCPackets,
+ pwPerf1DayIntervalInHCBytes,
+ pwPerf1DayIntervalOutHCPackets,
+ pwPerf1DayIntervalOutHCBytes
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects needed for a PW running 1-day
+
+ interval performance collection."
+ ::= { pwGroups 11 }
+
+pwPerformanceIntervalGeneralGroup OBJECT-GROUP
+ OBJECTS {
+ pwTimeElapsed,
+ pwValidIntervals,
+ pwPerfIntervalValidData,
+ pwPerfIntervalTimeElapsed
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of general objects needed for managing the
+ interval performance parameters."
+ ::= { pwGroups 12 }
+
+pwPeformanceIntervalGroup OBJECT-GROUP
+ OBJECTS {
+ pwPerfCurrentInPackets,
+ pwPerfCurrentInBytes,
+ pwPerfCurrentOutPackets,
+ pwPerfCurrentOutBytes,
+ pwPerfIntervalInPackets,
+ pwPerfIntervalInBytes,
+ pwPerfIntervalOutPackets,
+ pwPerfIntervalOutBytes
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of 32-bit objects needed for PW performance
+ collection in 15-minute intervals."
+ ::= { pwGroups 13 }
+
+pwHCPeformanceIntervalGroup OBJECT-GROUP
+ OBJECTS {
+ pwPerfCurrentInHCPackets,
+ pwPerfCurrentInHCBytes,
+ pwPerfCurrentOutHCPackets,
+ pwPerfCurrentOutHCBytes,
+ pwPerfIntervalInHCPackets,
+ pwPerfIntervalInHCBytes,
+ pwPerfIntervalOutHCPackets,
+ pwPerfIntervalOutHCBytes
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of HC objects needed for PW performance
+ collection in 15-minute intervals."
+ ::= { pwGroups 14 }
+
+pwMappingTablesGroup OBJECT-GROUP
+ OBJECTS {
+ pwIndexMappingPwIndex,
+ pwPeerMappingPwIndex,
+ pwGenFecIndexMappingPwIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects contained in the reverse
+ mapping tables."
+ ::= { pwGroups 15 }
+
+pwNotificationControlGroup OBJECT-GROUP
+ OBJECTS {
+ pwUpDownNotifEnable,
+ pwDeletedNotifEnable,
+ pwNotifRate
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for controlling the PW
+ notifications."
+ ::= { pwGroups 16 }
+
+pwNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ pwUp,
+ pwDown,
+ pwDeleted
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of PW notifications objects."
+ ::= { pwGroups 17 }
+
+pwSignalingGroup OBJECT-GROUP
+ OBJECTS {
+ pwPeerAddrType,
+ pwPeerAddr,
+ pwLocalGroupID,
+ pwLocalIfString,
+ pwLocalCapabAdvert,
+ pwRemoteGroupID,
+ pwCwStatus,
+ pwRemoteIfMtu,
+ pwRemoteIfString
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for use in implementations that
+ support the PW signaling."
+ ::= { pwGroups 18 }
+
+END
|