diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/VDSL-LINE-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/VDSL-LINE-MIB')
| -rw-r--r-- | MIBS/VDSL-LINE-MIB | 2840 |
1 files changed, 2840 insertions, 0 deletions
diff --git a/MIBS/VDSL-LINE-MIB b/MIBS/VDSL-LINE-MIB new file mode 100644 index 0000000..b8a0882 --- /dev/null +++ b/MIBS/VDSL-LINE-MIB @@ -0,0 +1,2840 @@ +
+ VDSL-LINE-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ Gauge32,
+ Integer32,
+ Unsigned32,
+ NOTIFICATION-TYPE,
+ transmission FROM SNMPv2-SMI -- [RFC2578]
+ ZeroBasedCounter64 FROM HCNUM-TC -- [RFC2856]
+ TEXTUAL-CONVENTION,
+ RowStatus,
+ TruthValue FROM SNMPv2-TC -- [RFC2579]
+ HCPerfValidIntervals,
+ HCPerfInvalidIntervals,
+ HCPerfTimeElapsed,
+ HCPerfIntervalThreshold,
+ HCPerfCurrentCount,
+ HCPerfIntervalCount FROM HC-PerfHist-TC-MIB -- [RFC3705]
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP,
+ NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
+ ifIndex FROM IF-MIB -- [RFC2863]
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
+
+ vdslMIB MODULE-IDENTITY
+ LAST-UPDATED "200402190000Z" -- February 19, 2004
+ ORGANIZATION "ADSLMIB Working Group"
+ CONTACT-INFO "WG-email: adslmib@ietf.org
+ Info: https://www1.ietf.org/mailman/listinfo/adslmib
+
+ Chair: Mike Sneed
+ Sand Channel Systems
+ Postal: P.O. Box 37324
+ Raleigh, NC 27627-7324
+ USA
+ Email: sneedmike@hotmail.com
+ Phone: +1 206 600 7022
+
+ Co-editor: Bob Ray
+ PESA Switching Systems, Inc.
+ Postal: 330-A Wynn Drive
+ Huntsville, AL 35805
+ USA
+ Email: rray@pesa.com
+ Phone: +1 256 726 9200 ext. 142
+
+ Co-editor: Rajesh Abbi
+ Alcatel USA
+ Postal: 2301 Sugar Bush Road
+ Raleigh, NC 27612-3339
+ USA
+ Email: Rajesh.Abbi@alcatel.com
+ Phone: +1 919 850 6194
+ "
+ DESCRIPTION
+ "The MIB module defining objects for the management of a pair
+ of VDSL transceivers at each end of the VDSL line. Each such
+ line has an entry in an ifTable which may include multiple
+ transceiver lines. An agent may reside at either end of the
+ VDSL line. However, the MIB is designed to require no
+ management communication between them beyond that inherent in
+ the low-level VDSL line protocol. The agent may monitor and
+ control this protocol for its needs.
+ VDSL lines may support optional Fast or Interleaved channels.
+ If these are supported, additional entries corresponding to the
+ supported channels must be created in the ifTable. Thus a VDSL
+ line that supports both channels will have three entries in the
+ ifTable, one for each physical, fast, and interleaved, whose
+ ifType values are equal to vdsl(97), fast(125), and
+ interleaved(124), respectively. The ifStackTable is used to
+ represent the relationship between the entries.
+
+ Naming Conventions:
+ Vtuc -- (VTUC) transceiver at near (Central) end of line
+ Vtur -- (VTUR) transceiver at Remote end of line
+ Vtu -- One of either Vtuc or Vtur
+ Curr -- Current
+ Prev -- Previous
+ Atn -- Attenuation
+ ES -- Errored Second.
+ SES -- Severely Errored Second
+ UAS -- Unavailable Second
+ LCS -- Line Code Specific
+ Lof -- Loss of Frame
+ Lol -- Loss of Link
+ Los -- Loss of Signal
+ Lpr -- Loss of Power
+ xxxs -- Sum of Seconds in which xxx has occured
+ (e.g., xxx = Lof, Los, Lpr, Lol)
+ Max -- Maximum
+ Mgn -- Margin
+ Min -- Minimum
+ Psd -- Power Spectral Density
+ Snr -- Signal to Noise Ratio
+ Tx -- Transmit
+ Blks -- Blocks
+
+ Copyright (C) The Internet Society (2004). This version
+ of this MIB module is part of RFC 3728: see the RFC
+ itself for full legal notices."
+ REVISION "200402190000Z" -- February 19, 2004
+ DESCRIPTION "Initial version, published as RFC 3728."
+ ::= { transmission 97 }
+
+ vdslLineMib OBJECT IDENTIFIER ::= { vdslMIB 1 }
+ vdslMibObjects OBJECT IDENTIFIER ::= { vdslLineMib 1 }
+
+ --
+ -- textual conventions used in this MIB
+ --
+
+ VdslLineCodingType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This data type is used as the syntax for the VDSL Line
+ Code. Attributes with this syntax identify the line coding
+ used. Specified as an INTEGER, the three values are:
+
+ other(1) -- none of the following
+ mcm(2) -- Multiple Carrier Modulation
+ scm(3) -- Single Carrier Modulation"
+ SYNTAX INTEGER
+ {
+ other(1),
+ mcm(2),
+ scm(3)
+ }
+
+ VdslLineEntity ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Identifies a transceiver as being either Vtuc or Vtur.
+ A VDSL line consists of two transceivers, a Vtuc and a
+ Vtur. Attributes with this syntax reference the two sides
+ of a line. Specified as an INTEGER, the two values are:
+
+ vtuc(1) -- central site transceiver
+ vtur(2) -- remote site transceiver"
+ SYNTAX INTEGER
+ {
+ vtuc(1),
+ vtur(2)
+ }
+
+ --
+ -- objects
+ --
+
+ vdslLineTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslLineEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes common attributes describing
+ both ends of the line. It is required for all VDSL
+ physical interfaces. VDSL physical interfaces are
+ those ifEntries where ifType is equal to vdsl(97)."
+ ::= { vdslMibObjects 1 }
+
+
+ vdslLineEntry OBJECT-TYPE
+ SYNTAX VdslLineEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry in the vdslLineTable."
+ INDEX { ifIndex }
+ ::= { vdslLineTable 1 }
+
+ VdslLineEntry ::=
+ SEQUENCE
+ {
+ vdslLineCoding VdslLineCodingType,
+ vdslLineType INTEGER,
+ vdslLineConfProfile SnmpAdminString,
+ vdslLineAlarmConfProfile SnmpAdminString
+ }
+
+ vdslLineCoding OBJECT-TYPE
+ SYNTAX VdslLineCodingType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the VDSL coding type used on this line."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslLineEntry 1 }
+
+ vdslLineType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ noChannel(1), -- no channels exist
+ fastOnly(2), -- only fast channel exists
+ interleavedOnly(3), -- only interleaved channel exists
+ fastOrInterleaved(4), -- either fast or interleaved channel
+ -- exist, but only one at a time
+ fastAndInterleaved(5) -- both fast and interleaved channels
+ -- exist
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the type of VDSL physical line entity that exists,
+ by defining whether and how the line is channelized. If
+ the line is channelized, the value will be other than
+ noChannel(1). This object defines which channel type(s)
+ are supported. Defined values are:
+
+ noChannel(1) -- no channels exist
+ fastOnly(2) -- only fast channel exists
+ interleavedOnly(3) -- only interleaved channel exists
+ fastOrInterleaved(4) -- either fast or interleaved channel
+ -- exist, but only one at a time
+ fastAndInterleaved(5) -- both fast and interleaved channels
+ -- exist
+
+ Note that 'slow' and 'interleaved' refer to the same
+ channel. In the case that the line is channelized, the
+ manager can use the ifStackTable to determine the ifIndex
+ for the associated channel(s)."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslLineEntry 2 }
+
+ vdslLineConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL
+ Line Configuration Profile Table, vdslLineConfProfileTable,
+ which applies for this VDSL line, and channels if
+ applicable.
+
+ This object MUST be maintained in a persistent manner."
+ DEFVAL { "DEFVAL" }
+ ::= { vdslLineEntry 3 }
+
+ vdslLineAlarmConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL
+ Line Alarm Configuration Profile Table,
+ vdslLineAlarmConfProfileTable, which applies to this
+ VDSL line, and channels if applicable.
+
+ This object MUST be maintained in a persistent manner."
+ DEFVAL { "DEFVAL" }
+ ::= { vdslLineEntry 4 }
+
+ vdslPhysTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslPhysEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each Vtu. Each row
+ contains the Physical Layer Parameters table for that
+ Vtu. VDSL physical interfaces are those ifEntries where
+ ifType is equal to vdsl(97)."
+ ::= { vdslMibObjects 2 }
+
+ vdslPhysEntry OBJECT-TYPE
+ SYNTAX VdslPhysEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry in the vdslPhysTable."
+ INDEX { ifIndex,
+ vdslPhysSide }
+ ::= { vdslPhysTable 1 }
+
+ VdslPhysEntry ::=
+ SEQUENCE
+ {
+ vdslPhysSide VdslLineEntity,
+ vdslPhysInvSerialNumber SnmpAdminString,
+ vdslPhysInvVendorID SnmpAdminString,
+ vdslPhysInvVersionNumber SnmpAdminString,
+ vdslPhysCurrSnrMgn Integer32,
+ vdslPhysCurrAtn Gauge32,
+ vdslPhysCurrStatus BITS,
+ vdslPhysCurrOutputPwr Integer32,
+ vdslPhysCurrAttainableRate Gauge32,
+ vdslPhysCurrLineRate Gauge32
+ }
+
+ vdslPhysSide OBJECT-TYPE
+ SYNTAX VdslLineEntity
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Identifies whether the transceiver is the Vtuc or Vtur."
+ ::= { vdslPhysEntry 1 }
+
+ vdslPhysInvSerialNumber OBJECT-TYPE
+ SYNTAX SnmpAdminString(SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor specific string that identifies the
+ vendor equipment."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 2 }
+
+ vdslPhysInvVendorID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor ID code is a copy of the binary vendor
+ identification field expressed as readable characters
+ in hexadecimal notation."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 3 }
+
+ vdslPhysInvVersionNumber OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor specific version number sent by this Vtu
+ as part of the initialization messages. It is a copy
+ of the binary version number field expressed as
+ readable characters in hexadecimal notation."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 4 }
+
+ vdslPhysCurrSnrMgn OBJECT-TYPE
+ SYNTAX Integer32 (-127..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Noise Margin as seen by this Vtu with respect to its
+ received signal in 0.25dB. The effective range is
+ -31.75 to +31.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 5 }
+
+ vdslPhysCurrAtn OBJECT-TYPE
+ SYNTAX Gauge32 (0..255)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Measured difference in the total power transmitted by
+ the peer Vtu and the total power received by this Vtu.
+ The effective range is 0 to +63.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 6 }
+
+ vdslPhysCurrStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ noDefect(0),
+ lossOfFraming(1),
+ lossOfSignal(2),
+ lossOfPower(3),
+ lossOfSignalQuality(4),
+ lossOfLink(5),
+ dataInitFailure(6),
+ configInitFailure(7),
+ protocolInitFailure(8),
+ noPeerVtuPresent(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates current state of the Vtu line. This is a
+ bit-map of possible conditions. The various bit
+ positions are:
+
+ 0 noDefect There are no defects on the line.
+
+ 1 lossOfFraming Vtu failure due to not receiving
+ a valid frame.
+
+ 2 lossOfSignal Vtu failure due to not receiving
+ signal.
+
+ 3 lossOfPower Vtu failure due to loss of power.
+
+ 4 lossOfSignalQuality Loss of Signal Quality is declared
+ when the Noise Margin falls below
+ the Minimum Noise Margin, or the
+ bit-error-rate exceeds 10^-7.
+
+ 5 lossOfLink Vtu failure due to inability to
+ link with peer Vtu. Set whenever
+ the transceiver is in the 'Warm
+ Start' state.
+
+ 6 dataInitFailure Vtu failure during initialization
+ due to bit errors corrupting
+ startup exchange data.
+
+ 7 configInitFailure Vtu failure during initialization
+ due to peer Vtu not able to
+ support requested configuration.
+
+ 8 protocolInitFailure Vtu failure during initialization
+ due to incompatible protocol used
+ by the peer Vtu.
+
+ 9 noPeerVtuPresent Vtu failure during initialization
+ due to no activation sequence
+ detected from peer Vtu.
+
+ This is intended to supplement ifOperStatus."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 7 }
+
+ vdslPhysCurrOutputPwr OBJECT-TYPE
+ SYNTAX Integer32 (0..160)
+ UNITS "0.1dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Measured total output power transmitted by this VTU.
+ This is the measurement that was reported during
+ the last activation sequence."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 8 }
+
+ vdslPhysCurrAttainableRate OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "kbps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the maximum currently attainable data rate
+ in steps of 1000 bits/second by the Vtu. This value
+ will be equal to or greater than vdslPhysCurrLineRate.
+ Note that for SCM, the minimum and maximum data rates
+ are equal. Note: 1 kbps = 1000 bps."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 9 }
+
+ vdslPhysCurrLineRate OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "kbps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current data rate in steps of 1000
+ bits/second by the Vtu. This value will be less than
+ or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
+ 1000 bps."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPhysEntry 10 }
+
+ vdslChanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslChanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each Vtu channel.
+ VDSL channel interfaces are those ifEntries where
+ ifType is equal to interleave(124) or fast(125)."
+ ::= { vdslMibObjects 3 }
+
+ vdslChanEntry OBJECT-TYPE
+ SYNTAX VdslChanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslChanTable."
+ INDEX { ifIndex,
+ vdslPhysSide }
+ ::= { vdslChanTable 1 }
+
+ VdslChanEntry ::=
+ SEQUENCE
+ {
+ vdslChanInterleaveDelay Gauge32,
+ vdslChanCrcBlockLength Gauge32,
+ vdslChanCurrTxRate Gauge32,
+ vdslChanCurrTxSlowBurstProtect Gauge32,
+ vdslChanCurrTxFastFec Gauge32
+ }
+
+ vdslChanInterleaveDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interleave Delay for this channel.
+
+ Interleave delay applies only to the interleave
+ (slow) channel and defines the mapping (relative
+ spacing) between subsequent input bytes at the
+ interleaver input and their placement in the bit
+ stream at the interleaver output. Larger numbers
+ provide greater separation between consecutive
+ input bytes in the output bit stream allowing for
+ improved impulse noise immunity at the expense of
+ payload latency.
+
+ In the case where the ifType is fast(125), return
+ a value of zero."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanEntry 1 }
+
+ vdslChanCrcBlockLength OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the length of the channel data-block
+ on which the CRC operates."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanEntry 2 }
+
+ vdslChanCurrTxRate OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "kbps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual transmit data rate on this channel. Note: 1
+ kbps = 1000 bps."
+ ::= { vdslChanEntry 3 }
+
+ vdslChanCurrTxSlowBurstProtect OBJECT-TYPE
+ SYNTAX Gauge32 (0..1275)
+ UNITS "microseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual level of impulse noise (burst) protection
+ for an interleaved (slow) channel. This parameter is
+ not applicable to fast channels. For fast channels,
+ a value of zero shall be returned."
+ REFERENCE "ITU-T G.997.1, section 7.3.2.3"
+ ::= { vdslChanEntry 4 }
+
+ vdslChanCurrTxFastFec OBJECT-TYPE
+ SYNTAX Gauge32 (0..50)
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Forward Error Correction (FEC) redundancy
+ related overhead for a fast channel. This parameter
+ is not applicable to an interleaved (slow) channel.
+ For interleaved channels, a value of zero shall be
+ returned."
+ ::= { vdslChanEntry 5 }
+
+ vdslPerfDataTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslPerfDataEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each VDSL physical
+ interface. VDSL physical interfaces are those ifEntries
+ where ifType is equal to vdsl(97)."
+ ::= { vdslMibObjects 4 }
+
+ vdslPerfDataEntry OBJECT-TYPE
+ SYNTAX VdslPerfDataEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslPerfDataTable."
+ INDEX { ifIndex,
+ vdslPhysSide }
+ ::= { vdslPerfDataTable 1 }
+
+ VdslPerfDataEntry ::=
+ SEQUENCE
+ {
+ vdslPerfDataValidIntervals HCPerfValidIntervals,
+ vdslPerfDataInvalidIntervals HCPerfInvalidIntervals,
+ vdslPerfDataLofs Unsigned32,
+ vdslPerfDataLoss Unsigned32,
+ vdslPerfDataLprs Unsigned32,
+ vdslPerfDataLols Unsigned32,
+ vdslPerfDataESs Unsigned32,
+ vdslPerfDataSESs Unsigned32,
+ vdslPerfDataUASs Unsigned32,
+ vdslPerfDataInits Unsigned32,
+ vdslPerfDataCurr15MinTimeElapsed HCPerfTimeElapsed,
+ vdslPerfDataCurr15MinLofs HCPerfCurrentCount,
+ vdslPerfDataCurr15MinLoss HCPerfCurrentCount,
+ vdslPerfDataCurr15MinLprs HCPerfCurrentCount,
+ vdslPerfDataCurr15MinLols HCPerfCurrentCount,
+ vdslPerfDataCurr15MinESs HCPerfCurrentCount,
+ vdslPerfDataCurr15MinSESs HCPerfCurrentCount,
+ vdslPerfDataCurr15MinUASs HCPerfCurrentCount,
+ vdslPerfDataCurr15MinInits HCPerfCurrentCount,
+ vdslPerfData1DayValidIntervals HCPerfValidIntervals,
+ vdslPerfData1DayInvalidIntervals HCPerfInvalidIntervals,
+ vdslPerfDataCurr1DayTimeElapsed HCPerfTimeElapsed,
+ vdslPerfDataCurr1DayLofs Unsigned32,
+ vdslPerfDataCurr1DayLoss Unsigned32,
+ vdslPerfDataCurr1DayLprs Unsigned32,
+ vdslPerfDataCurr1DayLols Unsigned32,
+ vdslPerfDataCurr1DayESs Unsigned32,
+ vdslPerfDataCurr1DaySESs Unsigned32,
+ vdslPerfDataCurr1DayUASs Unsigned32,
+ vdslPerfDataCurr1DayInits Unsigned32
+ }
+
+ vdslPerfDataValidIntervals OBJECT-TYPE
+ SYNTAX HCPerfValidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslPerfDataEntry 1 }
+
+ vdslPerfDataInvalidIntervals OBJECT-TYPE
+ SYNTAX HCPerfInvalidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Invalid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslPerfDataEntry 2 }
+
+ vdslPerfDataLofs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds since the unit was last reset that there
+ was Loss of Framing."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 3 }
+
+ vdslPerfDataLoss OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds since the unit was last reset that there
+ was Loss of Signal."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 4 }
+
+ vdslPerfDataLprs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds since the unit was last reset that there
+ was Loss of Power."
+
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 5 }
+
+ vdslPerfDataLols OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds since the unit was last reset that there
+ was Loss of Link."
+ ::= { vdslPerfDataEntry 6 }
+
+ vdslPerfDataESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds since the unit was last reset.
+ An Errored Second is a one-second interval containing one
+ or more CRC anomalies, or one or more LOS or LOF defects."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 7 }
+
+ vdslPerfDataSESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds since the unit was last
+ reset."
+ ::= { vdslPerfDataEntry 8 }
+
+ vdslPerfDataUASs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds since the unit was last
+ reset."
+ ::= { vdslPerfDataEntry 9 }
+
+ vdslPerfDataInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "occurrences"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of the line initialization attempts since the unit
+ was last reset. This count includes both successful and
+ failed attempts."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 10 }
+
+ vdslPerfDataCurr15MinTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { vdslPerfDataEntry 11 }
+
+ vdslPerfDataCurr15MinLofs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there
+ was Loss of Framing."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 12 }
+
+ vdslPerfDataCurr15MinLoss OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there
+ was Loss of Signal."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 13 }
+
+ vdslPerfDataCurr15MinLprs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there
+ was Loss of Power."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 14 }
+
+ vdslPerfDataCurr15MinLols OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there
+ was Loss of Link."
+ ::= { vdslPerfDataEntry 15 }
+
+ vdslPerfDataCurr15MinESs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds during this interval. An Errored
+ Second is a one-second interval containing one or more CRC
+ anomalies, or one or more LOS or LOF defects."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 16 }
+
+ vdslPerfDataCurr15MinSESs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds during this interval."
+ ::= { vdslPerfDataEntry 17 }
+
+ vdslPerfDataCurr15MinUASs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds during this interval."
+ ::= { vdslPerfDataEntry 18 }
+
+ vdslPerfDataCurr15MinInits OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "occurrences"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of the line initialization attempts during this
+ interval. This count includes both successful and
+ failed attempts."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfDataEntry 19 }
+
+ vdslPerfData1DayValidIntervals OBJECT-TYPE
+ SYNTAX HCPerfValidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslPerfDataEntry 20 }
+
+ vdslPerfData1DayInvalidIntervals OBJECT-TYPE
+ SYNTAX HCPerfInvalidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Invalid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslPerfDataEntry 21 }
+
+ vdslPerfDataCurr1DayTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of seconds that have elapsed since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 22 }
+
+ vdslPerfDataCurr1DayLofs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Framing (LOF) Seconds since the
+ beginning of the current 1-day interval."
+ ::= { vdslPerfDataEntry 23 }
+
+ vdslPerfDataCurr1DayLoss OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Signal (LOS) Seconds since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 24 }
+
+ vdslPerfDataCurr1DayLprs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Power (LPR) Seconds since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 25 }
+
+ vdslPerfDataCurr1DayLols OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Link (LOL) Seconds since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 26 }
+
+ vdslPerfDataCurr1DayESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds (ES) since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 27 }
+
+ vdslPerfDataCurr1DaySESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds (SES) since the
+ beginning of the current 1-day interval."
+ ::= { vdslPerfDataEntry 28 }
+
+ vdslPerfDataCurr1DayUASs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds (UAS) since the beginning
+ of the current 1-day interval."
+ ::= { vdslPerfDataEntry 29 }
+
+ vdslPerfDataCurr1DayInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of the line initialization attempts since the
+ beginning of the current 1-day interval. This count
+ includes both successful and failed attempts."
+ ::= { vdslPerfDataEntry 30 }
+
+ vdslPerfIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslPerfIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each Vtu performance
+ data collection interval. VDSL physical interfaces are
+ those ifEntries where ifType is equal to vdsl(97)."
+ ::= { vdslMibObjects 5 }
+
+ vdslPerfIntervalEntry OBJECT-TYPE
+ SYNTAX VdslPerfIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslPerfIntervalTable."
+ INDEX { ifIndex,
+ vdslPhysSide,
+ vdslPerfIntervalNumber }
+ ::= { vdslPerfIntervalTable 1 }
+
+ VdslPerfIntervalEntry ::=
+ SEQUENCE
+ {
+ vdslPerfIntervalNumber Unsigned32,
+ vdslPerfIntervalLofs HCPerfIntervalCount,
+ vdslPerfIntervalLoss HCPerfIntervalCount,
+ vdslPerfIntervalLprs HCPerfIntervalCount,
+ vdslPerfIntervalLols HCPerfIntervalCount,
+ vdslPerfIntervalESs HCPerfIntervalCount,
+ vdslPerfIntervalSESs HCPerfIntervalCount,
+ vdslPerfIntervalUASs HCPerfIntervalCount,
+ vdslPerfIntervalInits HCPerfIntervalCount
+ }
+
+ vdslPerfIntervalNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Performance Data Interval number 1 is the most recent
+ previous interval; interval 96 is 24 hours ago.
+ Intervals 2 to 96 are optional."
+ ::= { vdslPerfIntervalEntry 1 }
+
+ vdslPerfIntervalLofs OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in the interval when there was Loss
+ of Framing."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfIntervalEntry 2 }
+
+ vdslPerfIntervalLoss OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in the interval when there was Loss
+ of Signal."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfIntervalEntry 3 }
+
+ vdslPerfIntervalLprs OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in the interval when there was Loss
+ of Power."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfIntervalEntry 4 }
+
+ vdslPerfIntervalLols OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in the interval when there was Loss
+ of Link."
+ ::= { vdslPerfIntervalEntry 5 }
+
+ vdslPerfIntervalESs OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds (ES) in the interval. An Errored
+ Second is a one-second interval containing one or more CRC
+ anomalies, one or more LOS or LOF defects."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfIntervalEntry 6 }
+
+ vdslPerfIntervalSESs OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds in the interval."
+ ::= { vdslPerfIntervalEntry 7 }
+
+ vdslPerfIntervalUASs OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds in the interval."
+ ::= { vdslPerfIntervalEntry 8 }
+
+ vdslPerfIntervalInits OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of the line initialization attempts during this
+ interval. This count includes both successful and
+ failed attempts."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerfIntervalEntry 9 }
+
+ vdslPerf1DayIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslPerf1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each VDSL performance
+ data collection interval. This table contains live data
+ from equipment. As such, it is NOT persistent."
+ ::= { vdslMibObjects 6 }
+
+ vdslPerf1DayIntervalEntry OBJECT-TYPE
+ SYNTAX VdslPerf1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslPerf1DayIntervalTable."
+ INDEX { ifIndex,
+ vdslPhysSide,
+ vdslPerf1DayIntervalNumber }
+ ::= { vdslPerf1DayIntervalTable 1 }
+
+ VdslPerf1DayIntervalEntry ::=
+ SEQUENCE
+ {
+ vdslPerf1DayIntervalNumber Unsigned32,
+ vdslPerf1DayIntervalMoniSecs HCPerfTimeElapsed,
+ vdslPerf1DayIntervalLofs Unsigned32,
+ vdslPerf1DayIntervalLoss Unsigned32,
+ vdslPerf1DayIntervalLprs Unsigned32,
+ vdslPerf1DayIntervalLols Unsigned32,
+ vdslPerf1DayIntervalESs Unsigned32,
+ vdslPerf1DayIntervalSESs Unsigned32,
+ vdslPerf1DayIntervalUASs Unsigned32,
+ vdslPerf1DayIntervalInits Unsigned32
+ }
+
+ vdslPerf1DayIntervalNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "History Data Interval number. Interval 1 is the most
+ recent previous day; interval 30 is 30 days ago. Intervals
+ 2 to 30 are optional."
+ ::= { vdslPerf1DayIntervalEntry 1 }
+
+ vdslPerf1DayIntervalMoniSecs OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time in the 1-day interval over which the
+ performance monitoring information is actually counted.
+ This value will be the same as the interval duration except
+ in a situation where performance monitoring data could not
+ be collected for any reason."
+ ::= { vdslPerf1DayIntervalEntry 2 }
+
+ vdslPerf1DayIntervalLofs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Frame (LOF) Seconds during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerf1DayIntervalEntry 3 }
+
+ vdslPerf1DayIntervalLoss OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Signal (LOS) Seconds during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerf1DayIntervalEntry 4 }
+
+ vdslPerf1DayIntervalLprs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Power (LPR) Seconds during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerf1DayIntervalEntry 5 }
+
+ vdslPerf1DayIntervalLols OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Link (LOL) Seconds during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ ::= { vdslPerf1DayIntervalEntry 6 }
+
+ vdslPerf1DayIntervalESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds (ES) during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerf1DayIntervalEntry 7 }
+
+ vdslPerf1DayIntervalSESs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds (SES) during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ ::= { vdslPerf1DayIntervalEntry 8 }
+
+ vdslPerf1DayIntervalUASs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds (UAS) during the 1-day
+ interval as measured by vdslPerf1DayIntervalMoniSecs."
+ ::= { vdslPerf1DayIntervalEntry 9 }
+
+ vdslPerf1DayIntervalInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of the line initialization attempts during the
+ 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
+ This count includes both successful and failed attempts."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslPerf1DayIntervalEntry 10 }
+
+ vdslChanPerfDataTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslChanPerfDataEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each Vtu channel.
+ VDSL channel interfaces are those ifEntries where
+ ifType is equal to interleave(124) or fast(125)."
+ ::= { vdslMibObjects 7 }
+
+ vdslChanPerfDataEntry OBJECT-TYPE
+ SYNTAX VdslChanPerfDataEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslChanPerfDataTable."
+ INDEX { ifIndex,
+ vdslPhysSide }
+ ::= { vdslChanPerfDataTable 1 }
+
+ VdslChanPerfDataEntry ::=
+ SEQUENCE
+ {
+ vdslChanValidIntervals HCPerfValidIntervals,
+ vdslChanInvalidIntervals HCPerfInvalidIntervals,
+ vdslChanFixedOctets ZeroBasedCounter64,
+ vdslChanBadBlks ZeroBasedCounter64,
+ vdslChanCurr15MinTimeElapsed HCPerfTimeElapsed,
+ vdslChanCurr15MinFixedOctets HCPerfCurrentCount,
+ vdslChanCurr15MinBadBlks HCPerfCurrentCount,
+ vdslChan1DayValidIntervals HCPerfValidIntervals,
+ vdslChan1DayInvalidIntervals HCPerfInvalidIntervals,
+ vdslChanCurr1DayTimeElapsed HCPerfTimeElapsed,
+ vdslChanCurr1DayFixedOctets HCPerfCurrentCount,
+ vdslChanCurr1DayBadBlks HCPerfCurrentCount
+ }
+
+ vdslChanValidIntervals OBJECT-TYPE
+ SYNTAX HCPerfValidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslChanPerfDataEntry 1 }
+
+ vdslChanInvalidIntervals OBJECT-TYPE
+ SYNTAX HCPerfInvalidIntervals
+ UNITS "intervals"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Invalid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslChanPerfDataEntry 2 }
+
+ vdslChanFixedOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of corrected octets since the unit was last reset."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 3 }
+
+ vdslChanBadBlks OBJECT-TYPE
+ SYNTAX ZeroBasedCounter64
+ UNITS "blocks"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of uncorrectable blocks since the unit was last
+ reset."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 4 }
+
+ vdslChanCurr15MinTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { vdslChanPerfDataEntry 5 }
+
+ vdslChanCurr15MinFixedOctets OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of corrected octets in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 6 }
+
+ vdslChanCurr15MinBadBlks OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "blocks"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of uncorrectable blocks in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 7 }
+
+ vdslChan1DayValidIntervals OBJECT-TYPE
+ SYNTAX HCPerfValidIntervals
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslChanPerfDataEntry 8 }
+
+ vdslChan1DayInvalidIntervals OBJECT-TYPE
+ SYNTAX HCPerfInvalidIntervals
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Invalid Intervals per definition found in
+ HC-PerfHist-TC-MIB."
+ ::= { vdslChanPerfDataEntry 9 }
+
+ vdslChanCurr1DayTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of seconds that have elapsed since the beginning
+ of the current 1-day interval."
+ ::= { vdslChanPerfDataEntry 10 }
+
+ vdslChanCurr1DayFixedOctets OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of corrected octets since the beginning of the
+ current 1-day interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 11 }
+
+ vdslChanCurr1DayBadBlks OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "blocks"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of uncorrectable blocks since the beginning of the
+ current 1-day interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanPerfDataEntry 12 }
+
+ vdslChanIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslChanIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each Vtu channel data
+ collection interval. VDSL channel interfaces are those
+ ifEntries where ifType is equal to interleave(124) or
+ fast(125)."
+
+ ::= { vdslMibObjects 8 }
+
+ vdslChanIntervalEntry OBJECT-TYPE
+ SYNTAX VdslChanIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslChanIntervalTable."
+ INDEX { ifIndex,
+ vdslPhysSide,
+ vdslChanIntervalNumber }
+ ::= { vdslChanIntervalTable 1 }
+
+ VdslChanIntervalEntry ::=
+ SEQUENCE
+ {
+ vdslChanIntervalNumber Unsigned32,
+ vdslChanIntervalFixedOctets HCPerfIntervalCount,
+ vdslChanIntervalBadBlks HCPerfIntervalCount
+ }
+
+ vdslChanIntervalNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Performance Data Interval number 1 is the most recent
+ previous interval; interval 96 is 24 hours ago.
+ Intervals 2 to 96 are optional."
+ ::= { vdslChanIntervalEntry 1 }
+
+ vdslChanIntervalFixedOctets OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of corrected octets in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanIntervalEntry 2 }
+
+ vdslChanIntervalBadBlks OBJECT-TYPE
+ SYNTAX HCPerfIntervalCount
+ UNITS "blocks"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of uncorrectable blocks in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChanIntervalEntry 3 }
+
+ vdslChan1DayIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslChan1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides one row for each VDSL performance
+ data collection interval. This table contains live data
+ from equipment. As such, it is NOT persistent."
+ ::= { vdslMibObjects 9 }
+
+ vdslChan1DayIntervalEntry OBJECT-TYPE
+ SYNTAX VdslChan1DayIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the vdslChan1DayIntervalTable."
+ INDEX { ifIndex,
+ vdslPhysSide,
+ vdslChan1DayIntervalNumber }
+ ::= { vdslChan1DayIntervalTable 1 }
+
+ VdslChan1DayIntervalEntry ::=
+ SEQUENCE
+ {
+ vdslChan1DayIntervalNumber Unsigned32,
+ vdslChan1DayIntervalMoniSecs HCPerfTimeElapsed,
+ vdslChan1DayIntervalFixedOctets HCPerfCurrentCount,
+ vdslChan1DayIntervalBadBlks HCPerfCurrentCount
+ }
+
+ vdslChan1DayIntervalNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "History Data Interval number. Interval 1 is the most
+ recent previous day; interval 30 is 30 days ago. Intervals
+ 2 to 30 are optional."
+ ::= { vdslChan1DayIntervalEntry 1 }
+
+ vdslChan1DayIntervalMoniSecs OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time in the 1-day interval over which the
+ performance monitoring information is actually counted.
+ This value will be the same as the interval duration except
+ in a situation where performance monitoring data could not
+ be collected for any reason."
+ ::= { vdslChan1DayIntervalEntry 2 }
+
+ vdslChan1DayIntervalFixedOctets OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of corrected octets in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChan1DayIntervalEntry 3 }
+
+ vdslChan1DayIntervalBadBlks OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ UNITS "blocks"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of uncorrectable blocks in this interval."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ ::= { vdslChan1DayIntervalEntry 4 }
+
+ --
+ -- profile tables
+ --
+
+ vdslLineConfProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslLineConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains information on the VDSL line
+ configuration. One entry in this table reflects a
+ profile defined by a manager which can be used to
+ configure the VDSL line.
+
+ Entries in this table MUST be maintained in a
+ persistent manner."
+ ::= { vdslMibObjects 11 }
+
+ vdslLineConfProfileEntry OBJECT-TYPE
+ SYNTAX VdslLineConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry consists of a list of parameters that
+ represents the configuration of a VDSL line.
+
+ A default profile with an index of 'DEFVAL', will
+ always exist and its parameters will be set to vendor
+ specific values, unless otherwise specified in this
+ document."
+ INDEX { vdslLineConfProfileName }
+ ::= { vdslLineConfProfileTable 1 }
+
+ VdslLineConfProfileEntry ::=
+ SEQUENCE
+ {
+ vdslLineConfProfileName SnmpAdminString,
+ vdslLineConfDownRateMode INTEGER,
+ vdslLineConfUpRateMode INTEGER,
+ vdslLineConfDownMaxPwr Unsigned32,
+ vdslLineConfUpMaxPwr Unsigned32,
+ vdslLineConfDownMaxSnrMgn Unsigned32,
+ vdslLineConfDownMinSnrMgn Unsigned32,
+ vdslLineConfDownTargetSnrMgn Unsigned32,
+ vdslLineConfUpMaxSnrMgn Unsigned32,
+ vdslLineConfUpMinSnrMgn Unsigned32,
+ vdslLineConfUpTargetSnrMgn Unsigned32,
+ vdslLineConfDownFastMaxDataRate Unsigned32,
+ vdslLineConfDownFastMinDataRate Unsigned32,
+ vdslLineConfDownSlowMaxDataRate Unsigned32,
+ vdslLineConfDownSlowMinDataRate Unsigned32,
+ vdslLineConfUpFastMaxDataRate Unsigned32,
+ vdslLineConfUpFastMinDataRate Unsigned32,
+ vdslLineConfUpSlowMaxDataRate Unsigned32,
+ vdslLineConfUpSlowMinDataRate Unsigned32,
+ vdslLineConfDownRateRatio Unsigned32,
+ vdslLineConfUpRateRatio Unsigned32,
+ vdslLineConfDownMaxInterDelay Unsigned32,
+ vdslLineConfUpMaxInterDelay Unsigned32,
+ vdslLineConfDownPboControl INTEGER,
+ vdslLineConfUpPboControl INTEGER,
+ vdslLineConfDownPboLevel Unsigned32,
+ vdslLineConfUpPboLevel Unsigned32,
+ vdslLineConfDeploymentScenario INTEGER,
+ vdslLineConfAdslPresence INTEGER,
+ vdslLineConfApplicableStandard INTEGER,
+ vdslLineConfBandPlan INTEGER,
+ vdslLineConfBandPlanFx Unsigned32,
+ vdslLineConfBandOptUsage INTEGER,
+ vdslLineConfUpPsdTemplate INTEGER,
+ vdslLineConfDownPsdTemplate INTEGER,
+ vdslLineConfHamBandMask BITS,
+ vdslLineConfCustomNotch1Start Unsigned32,
+ vdslLineConfCustomNotch1Stop Unsigned32,
+ vdslLineConfCustomNotch2Start Unsigned32,
+ vdslLineConfCustomNotch2Stop Unsigned32,
+ vdslLineConfDownTargetSlowBurst Unsigned32,
+ vdslLineConfUpTargetSlowBurst Unsigned32,
+ vdslLineConfDownMaxFastFec Unsigned32,
+ vdslLineConfUpMaxFastFec Unsigned32,
+ vdslLineConfLineType INTEGER,
+ vdslLineConfProfRowStatus RowStatus
+ }
+
+ vdslLineConfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table.
+
+ A default profile with an index of 'DEFVAL', will
+ always exist and its parameters will be set to vendor
+ specific values, unless otherwise specified in this
+ document."
+ ::= { vdslLineConfProfileEntry 1 }
+
+ vdslLineConfDownRateMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ manual(1),
+ adaptAtInit(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the rate selection behavior for the line
+ in the downstream direction.
+
+ manual(1) forces the rate to the configured rate
+ adaptAtInit(2) adapts the line based upon line quality."
+ DEFVAL { adaptAtInit }
+ ::= { vdslLineConfProfileEntry 2 }
+
+ vdslLineConfUpRateMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ manual(1),
+ adaptAtInit(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the rate selection behavior for the line
+ in the upstream direction.
+
+ manual(1) forces the rate to the configured rate
+ adaptAtInit(2) adapts the line based upon line quality."
+ DEFVAL { adaptAtInit }
+ ::= { vdslLineConfProfileEntry 3 }
+
+ vdslLineConfDownMaxPwr OBJECT-TYPE
+ SYNTAX Unsigned32 (0..58)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum aggregate downstream power
+ level in the range 0 to 14.5 dBm."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 4 }
+
+ vdslLineConfUpMaxPwr OBJECT-TYPE
+ SYNTAX Unsigned32 (0..58)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum aggregate upstream power
+ level in the range 0 to 14.5 dBm."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 5 }
+
+ vdslLineConfDownMaxSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum downstream Signal/Noise Margin
+ in units of 0.25 dB, for a range of 0 to 31.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 6 }
+
+ vdslLineConfDownMinSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum downstream Signal/Noise Margin
+ in units of 0.25 dB, for a range of 0 to 31.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 7 }
+
+ vdslLineConfDownTargetSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the target downstream Signal/Noise Margin
+ in units of 0.25 dB, for a range of 0 to 31.75 dB.
+ This is the Noise Margin the transceivers must achieve
+ with a BER of 10^-7 or better to successfully complete
+ initialization."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 8 }
+
+ vdslLineConfUpMaxSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum upstream Signal/Noise Margin
+ in units of 0.25 dB, for a range of 0 to 31.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 9 }
+
+ vdslLineConfUpMinSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum upstream Signal/Noise Margin
+ in units of 0.25 dB, for a range of 0 to 31.75 dB."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 10 }
+
+ vdslLineConfUpTargetSnrMgn OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ UNITS "0.25dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the target upstream Signal/Noise Margin in
+ units of 0.25 dB, for a range of 0 to 31.75 dB. This
+ is the Noise Margin the transceivers must achieve with
+ a BER of 10^-7 or better to successfully complete
+ initialization."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 11 }
+
+ vdslLineConfDownFastMaxDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum downstream fast channel
+ data rate in steps of 1000 bits/second."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 12 }
+
+ vdslLineConfDownFastMinDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum downstream fast channel
+ data rate in steps of 1000 bits/second."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 13 }
+
+ vdslLineConfDownSlowMaxDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum downstream slow channel
+ data rate in steps of 1000 bits/second.
+
+ The maximum aggregate downstream transmit speed
+ of the line can be derived from the sum of maximum
+ downstream fast and slow channel data rates."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 14 }
+
+ vdslLineConfDownSlowMinDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum downstream slow channel
+ data rate in steps of 1000 bits/second.
+
+ The minimum aggregate downstream transmit speed
+ of the line can be derived from the sum of minimum
+ downstream fast and slow channel data rates."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 15 }
+
+ vdslLineConfUpFastMaxDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum upstream fast channel
+ data rate in steps of 1000 bits/second.
+
+ The maximum aggregate upstream transmit speed
+ of the line can be derived from the sum of maximum
+ upstream fast and slow channel data rates."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 16 }
+
+ vdslLineConfUpFastMinDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum upstream fast channel
+ data rate in steps of 1000 bits/second.
+ The minimum aggregate upstream transmit speed
+ of the line can be derived from the sum of minimum
+ upstream fast and slow channel data rates."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 17 }
+
+ vdslLineConfUpSlowMaxDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum upstream slow channel
+ data rate in steps of 1000 bits/second."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 18 }
+
+ vdslLineConfUpSlowMinDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum upstream slow channel
+ data rate in steps of 1000 bits/second."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 19 }
+
+ vdslLineConfDownRateRatio OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "For dynamic rate adaptation at startup, the allocation
+ of data rate in excess of the minimum data rate for each
+ channel is controlled by the object. This object specifies
+ the ratio of the allocation of the excess data rate between
+ the fast and the slow channels. This allocation represents
+ downstream Fast Channel Allocation / Slow Channel
+ Allocation."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 20 }
+
+ vdslLineConfUpRateRatio OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "For dynamic rate adaptation at startup, the allocation
+ of data rate in excess of the minimum data rate for each
+ channel is controlled by the object. This object specifies
+ the ratio of the allocation of the excess data rate between
+ the fast and the slow channels. This allocation represents
+ upstream Fast Channel Allocation/Slow Channel Allocation."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 21 }
+
+ vdslLineConfDownMaxInterDelay OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum interleave delay for the
+ downstream slow channel."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 22 }
+
+ vdslLineConfUpMaxInterDelay OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum interleave delay for the
+ upstream slow channel."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 23 }
+
+ vdslLineConfDownPboControl OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disabled(1),
+ auto(2),
+ manual(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Downstream power backoff (PBO) control for this
+ line. For transceivers which do not support downstream
+ PBO control, this object MUST be fixed at disabled(1).
+ If auto(2) is selected, the transceiver will automatically
+ adjust the power backoff. If manual(3) is selected,
+ then the transceiver will use the value from
+ vdslLineConfDownPboLevel."
+ DEFVAL { disabled }
+ ::= { vdslLineConfProfileEntry 24 }
+
+ vdslLineConfUpPboControl OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disabled(1),
+ auto(2),
+ manual(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Upstream power backoff (PBO) control for this
+ line. For transceivers which do not support upstream
+ PBO control, this object MUST be fixed at disabled(1).
+ If auto(2) is selected, the transceiver will automatically
+ adjust the power backoff. If manual(3) is selected,
+ then the transceiver will use the value from
+ vdslLineConfUpPboLevel."
+ DEFVAL { disabled }
+ ::= { vdslLineConfProfileEntry 25 }
+
+ vdslLineConfDownPboLevel OBJECT-TYPE
+ SYNTAX Unsigned32 (0..160)
+ UNITS "0.25dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the downstream backoff level to be used
+ when vdslLineConfDownPboControl = manual(3)."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 26 }
+
+ vdslLineConfUpPboLevel OBJECT-TYPE
+ SYNTAX Unsigned32 (0..160)
+ UNITS "0.25dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the upstream backoff level to be used
+ when vdslLineConfUpPboControl = manual(3)."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 27 }
+
+ vdslLineConfDeploymentScenario OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fttCab(1),
+ fttEx(2),
+ other(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The VDSL line deployment scenario. When using
+ fttCab(1), the VTU-C is located in a street cabinet.
+ When using fttEx(2), the VTU-C is located at the
+ central office. Changes to this value will have
+ no effect on the transceiver."
+ REFERENCE "DSL Forum TR-057"
+ DEFVAL { fttCab }
+ ::= { vdslLineConfProfileEntry 28 }
+
+ vdslLineConfAdslPresence OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ none(1),
+ adslOverPots(2),
+ adslOverISDN(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates presence of ADSL service in the associated
+ cable bundle/binder.
+
+ none(1) indicates no ADSL service in the bundle
+ adslOverPots(2) indicates ADSL service over POTS is
+ present in the bundle
+ adslOverISDN(3) indicates ADSL service over ISDN is
+ present in the bundle"
+ DEFVAL { none }
+ ::= { vdslLineConfProfileEntry 29 }
+
+ vdslLineConfApplicableStandard OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ansi(1),
+ etsi(2),
+ itu(3),
+ other(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The VDSL standard to be used for the line.
+
+ ansi(1) indicates ANSI standard
+ etsi(2) indicates ETSI standard
+ itu(3) indicates ITU standard
+ other(4) indicates a standard other than the above."
+ DEFVAL { ansi }
+ ::= { vdslLineConfProfileEntry 30 }
+
+ vdslLineConfBandPlan OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ bandPlan997(1),
+ bandPlan998(2),
+ bandPlanFx(3),
+ other(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The VDSL band plan to be used for the line.
+
+ bandPlan997(1) is to be used for
+ ITU-T G.993.1 Bandplan-B
+ ETSI Bandplan
+ ANSI Plan 997
+
+ bandPlan998(2) is to be used for
+ ITU-T G.993.1 Bandplan-A
+ ANSI Plan 998
+
+ bandPlanFx(3) is to be used for
+ ITU-T G.993.1 Bandplan-C.
+
+ other(4) is to be used for
+ non-standard bandplans.
+
+ If this object is set to bandPlanFx(3), then the
+ object vdslLineConfBandPlanFx MUST also be set."
+ DEFVAL { bandPlan997 }
+ ::= { vdslLineConfProfileEntry 31 }
+
+ vdslLineConfBandPlanFx OBJECT-TYPE
+ SYNTAX Unsigned32 (3750..12000)
+ UNITS "kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The frequency limit between bands D2 and U2 when
+ vdslLineConfBandPlan is set to bandPlanFx(3)."
+ DEFVAL { 3750 }
+ ::= { vdslLineConfProfileEntry 32 }
+
+ vdslLineConfBandOptUsage OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unused(1),
+ upstream(2),
+ downstream(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the VDSL link use of the optional frequency
+ range [25kHz - 138kHz] (Opt).
+
+ unused(1) indicates Opt is unused
+ upstream(2) indicates Opt usage is for upstream
+ downstream(3) indicates Opt usage is for downstream."
+ REFERENCE "ITU-T G.993.1, section 6.1"
+ DEFVAL { unused }
+ ::= { vdslLineConfProfileEntry 33 }
+
+ vdslLineConfUpPsdTemplate OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ templateMask1(1),
+ templateMask2(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The upstream PSD template to be used for the line.
+ Here, templateMask1(1) refers to a notched mask that
+ limits the transmitted PSD within the internationally
+ standardized HAM (Handheld Amateur Radio) radio bands,
+ while templateMask2(2) refers to an unnotched mask.
+
+ The masks themselves depend upon the applicable
+ standard being used (vdslLineConfApplicableStandard)."
+ REFERENCE "DSL TR-057"
+ DEFVAL { templateMask1 }
+ ::= { vdslLineConfProfileEntry 34 }
+
+
+ vdslLineConfDownPsdTemplate OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ templateMask1(1),
+ templateMask2(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The downstream PSD template to be used for the line.
+ Here, templateMask1(1) refers to a notched mask that
+ limits the transmitted PSD within the internationally
+ standardized HAM (Handheld Amateur Radio) radio bands,
+ while templateMask2(2) refers to an unnotched mask.
+
+ The masks themselves depend upon the applicable
+ standard being used (vdslLineConfApplicableStandard)."
+ REFERENCE "DSL TR-057"
+ DEFVAL { templateMask1 }
+ ::= { vdslLineConfProfileEntry 35 }
+
+ vdslLineConfHamBandMask OBJECT-TYPE
+ SYNTAX BITS
+ {
+ customNotch1(0), -- custom (region-specific) notch
+ customNotch2(1), -- custom (region-specific) notch
+ amateurBand30m(2), -- amateur radio band notch
+ amateurBand40m(3), -- amateur radio band notch
+ amateurBand80m(4), -- amateur radio band notch
+ amateurBand160m(5) -- amateur radio band notch
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The transmit power spectral density mask code, used
+ to avoid interference with HAM (Handheld Amateur Radio)
+ radio bands by introducing power control (notching) in one
+ or more of these bands.
+
+ Amateur radio band notching is defined in the VDSL
+ spectrum as follows:
+
+ Band Start Frequency Stop Frequency
+ ---- ------------------ --------------------------------
+ 30m 1810 kHz 2000 kHz
+ 40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI)
+ 80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI)
+ 160m 10100 kHz 10150 kHz
+
+ Notching for each standard band can be enabled or disabled
+ via the bit mask.
+
+ Two custom notches may be specified. If either of these
+ are enabled via the bit mask, then the following objects
+ MUST be specified:
+
+ If customNotch1 is enabled, then both
+ vdslLineConfCustomNotch1Start
+ vdslLineConfCustomNotch1Stop
+ MUST be specified.
+
+ If customNotch2 is enabled, then both
+ vdslLineConfCustomNotch2Start
+ vdslLineConfCustomNotch2Stop
+ MUST be specified."
+ REFERENCE "DSLF TR-057, section 2.6"
+ DEFVAL { { } }
+ ::= { vdslLineConfProfileEntry 36 }
+
+ vdslLineConfCustomNotch1Start OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the start frequency of custom HAM (Handheld
+ Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST
+ be less than or equal to vdslLineConfCustomNotch1Stop."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 37 }
+
+ vdslLineConfCustomNotch1Stop OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the stop frequency of custom HAM (Handheld
+ Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST
+ be greater than or equal to vdslLineConfCustomNotch1Start."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 38 }
+
+ vdslLineConfCustomNotch2Start OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the start frequency of custom HAM (Handheld
+ Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST
+ be less than or equal to vdslLineConfCustomNotch2Stop."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 39 }
+
+ vdslLineConfCustomNotch2Stop OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the stop frequency of custom HAM (Handheld
+ Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST
+ be greater than or equal to vdslLineConfCustomNotch2Start."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 40 }
+
+ vdslLineConfDownTargetSlowBurst OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1275)
+ UNITS "microseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the target level of impulse noise (burst)
+ protection for an interleaved (slow) channel."
+ REFERENCE "ITU-T G.997.1, section 7.3.2.3"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 41 }
+
+ vdslLineConfUpTargetSlowBurst OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1275)
+ UNITS "microseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the target level of impulse noise (burst)
+ protection for an interleaved (slow) channel."
+ REFERENCE "ITU-T G.997.1, section 7.3.2.3"
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 42 }
+
+ vdslLineConfDownMaxFastFec OBJECT-TYPE
+ SYNTAX Unsigned32 (0..50)
+ UNITS "%"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter provisions the maximum level of Forward
+ Error Correction (FEC) redundancy related overhead to
+ be maintained for a fast channel."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 43 }
+
+ vdslLineConfUpMaxFastFec OBJECT-TYPE
+ SYNTAX Unsigned32 (0..50)
+ UNITS "%"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter provisions the maximum level of Forward
+ Error Correction (FEC) redundancy related overhead to
+ be maintained for a fast channel."
+ DEFVAL { 0 }
+ ::= { vdslLineConfProfileEntry 44 }
+
+ vdslLineConfLineType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ noChannel(1), -- no channels exist
+ fastOnly(2), -- only fast channel exists
+ interleavedOnly(3), -- only interleaved channel exists
+ fastOrInterleaved(4), -- either fast or interleaved channel
+ -- exist, but only one at a time
+ fastAndInterleaved(5) -- both fast and interleaved channels
+ -- exist
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter provisions the VDSL physical entity at
+ start-up by defining whether and how the line will be
+ channelized, i.e., which channel type(s) are supported.
+ If the line is to be channelized, the value will be other
+ than noChannel(1).
+
+ This configuration can be activated only during start-up.
+ Afterwards, the value of vdslLineType coincides with the
+ value of vdslLineConfLineType. Depending on this value,
+ the corresponding entries in the ifTable for the
+ interleaved and the fast channels are enabled or disabled
+ according to the value of their ifOperStatus.
+
+ Defined values are:
+ noChannel(1) -- no channels exist
+ fastOnly(2) -- only fast channel exists
+ interleavedOnly(3) -- only interleaved channel exists
+ fastOrInterleaved(4) -- either fast or interleaved channel
+ -- exists, but only one at a time
+ fastAndInterleaved(5) -- both fast and interleaved channels
+ -- exist
+
+ Note that 'slow' and 'interleaved' refer to the same
+ channel."
+ REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
+ DEFVAL { noChannel }
+ ::= { vdslLineConfProfileEntry 45 }
+
+ vdslLineConfProfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or modify or
+ delete an existing row in this table.
+
+ A profile activated by setting this object to 'active'.
+ When 'active' is set, the system will validate the profile.
+
+ Before a profile can be deleted or taken out of service
+ (by setting this object to 'destroy' or 'outOfService'),
+ it must be first unreferenced from all associated lines.
+
+ An 'active' profile may be modified at any time. Note
+ that some changes may require that any referenced lines be
+ restarted (e.g., vdslLineConfLineType)."
+ ::= { vdslLineConfProfileEntry 46 }
+
+ --
+ -- Alarm configuration profile table
+ --
+
+ vdslLineAlarmConfProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VdslLineAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains information on the VDSL line alarm
+ configuration. One entry in this table reflects a profile
+ defined by a manager which can be used to configure the
+ VDSL line alarm thresholds.
+ Entries in this table MUST be maintained in a
+ persistent manner."
+ ::= { vdslMibObjects 20 }
+
+ vdslLineAlarmConfProfileEntry OBJECT-TYPE
+ SYNTAX VdslLineAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry consists of a list of parameters that
+ represents the configuration of a VDSL line alarm
+ profile.
+
+ A default profile with an index of 'DEFVAL', will
+ always exist and its parameters will be set to vendor
+ specific values, unless otherwise specified in this
+ document."
+ INDEX { vdslLineAlarmConfProfileName }
+ ::= { vdslLineAlarmConfProfileTable 1 }
+
+ VdslLineAlarmConfProfileEntry ::=
+ SEQUENCE
+ {
+ vdslLineAlarmConfProfileName SnmpAdminString,
+ vdslLineAlarmConfThresh15MinLofs HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinLoss HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinLprs HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinLols HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinESs HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinSESs HCPerfIntervalThreshold,
+ vdslLineAlarmConfThresh15MinUASs HCPerfIntervalThreshold,
+ vdslLineAlarmConfInitFailure TruthValue,
+ vdslLineAlarmConfProfRowStatus RowStatus
+ }
+
+ vdslLineAlarmConfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name for this profile as specified by an
+ administrator."
+ ::= { vdslLineAlarmConfProfileEntry 1 }
+
+ vdslLineAlarmConfThresh15MinLofs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ loss of frame seconds (lofs) within any given 15-minute
+ performance data collection interval. If the value of
+ loss of frame seconds in a particular 15-minute collection
+ interval reaches/exceeds this value, a
+ vdslPerfLofsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 2 }
+
+ vdslLineAlarmConfThresh15MinLoss OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ loss of signal seconds (loss) within any given 15-minute
+ performance data collection interval. If the value of
+ loss of signal seconds in a particular 15-minute
+ collection interval reaches/exceeds this value, a
+ vdslPerfLossThreshNotification notification will be
+ generated. One notification will be sent per interval
+ per endpoint."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 3 }
+
+ vdslLineAlarmConfThresh15MinLprs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ loss of power seconds (lprs) within any given 15-minute
+ performance data collection interval. If the value of
+ loss of power seconds in a particular 15-minute collection
+ interval reaches/exceeds this value, a
+ vdslPerfLprsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 4 }
+
+ vdslLineAlarmConfThresh15MinLols OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ loss of link seconds (lols) within any given 15-minute
+ performance data collection interval. If the value of
+ loss of power seconds in a particular 15-minute collection
+ interval reaches/exceeds this value, a
+ vdslPerfLolsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 5 }
+
+ vdslLineAlarmConfThresh15MinESs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ errored seconds (ESs) within any given 15-minute
+ performance data collection interval. If the value of
+ errored seconds in a particular 15-minute collection
+ interval reaches/exceeds this value, a
+ vdslPerfESsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 6 }
+
+ vdslLineAlarmConfThresh15MinSESs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ severely errored seconds (SESs) within any given 15-minute
+ performance data collection interval. If the value of
+ severely errored seconds in a particular 15-minute
+ collection interval reaches/exceeds this value, a
+ vdslPerfSESsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 7 }
+
+ vdslLineAlarmConfThresh15MinUASs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object configures the threshold for the number of
+ unavailable seconds (UASs) within any given 15-minute
+ performance data collection interval. If the value of
+ unavailable seconds in a particular 15-minute collection
+ interval reaches/exceeds this value, a
+ vdslPerfUASsThreshNotification notification will be
+ generated. No more than one notification will be sent
+ per interval."
+ DEFVAL { 0 }
+ ::= { vdslLineAlarmConfProfileEntry 8 }
+
+ vdslLineAlarmConfInitFailure OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies if a vdslInitFailureNotification
+ notification will be generated if an initialization
+ failure occurs."
+ DEFVAL { false }
+ ::= { vdslLineAlarmConfProfileEntry 9 }
+
+ vdslLineAlarmConfProfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or modify or
+ delete an existing row in this table.
+
+ A profile activated by setting this object to 'active'.
+ When 'active' is set, the system will validate the profile.
+
+ Before a profile can be deleted or taken out of service,
+ (by setting this object to 'destroy' or 'outOfService') it
+ must be first unreferenced from all associated lines.
+
+ An 'active' profile may be modified at any time."
+ ::= { vdslLineAlarmConfProfileEntry 10 }
+
+
+ -- Notification definitions
+
+ vdslNotifications OBJECT IDENTIFIER ::= { vdslLineMib 0 }
+
+ vdslPerfLofsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinLofs
+ }
+ STATUS current
+ DESCRIPTION
+ "Loss of Framing 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinLofs) reached."
+ ::= { vdslNotifications 1 }
+
+ vdslPerfLossThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinLoss
+ }
+ STATUS current
+ DESCRIPTION
+ "Loss of Signal 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinLoss) reached."
+ ::= { vdslNotifications 2 }
+
+ vdslPerfLprsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinLprs
+ }
+ STATUS current
+ DESCRIPTION
+ "Loss of Power 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinLprs) reached."
+ ::= { vdslNotifications 3 }
+
+ vdslPerfLolsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinLols
+ }
+ STATUS current
+ DESCRIPTION
+ "Loss of Link 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinLols) reached."
+ ::= { vdslNotifications 4 }
+
+ vdslPerfESsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinESs
+ }
+
+ STATUS current
+ DESCRIPTION
+ "Errored Seconds 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinESs) reached."
+ ::= { vdslNotifications 5 }
+
+ vdslPerfSESsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinSESs
+ }
+ STATUS current
+ DESCRIPTION
+ "Severely Errored Seconds 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinSESs) reached."
+ ::= { vdslNotifications 6 }
+
+ vdslPerfUASsThreshNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPerfDataCurr15MinUASs
+ }
+ STATUS current
+ DESCRIPTION
+ "Unavailable Seconds 15-minute interval threshold
+ (vdslLineAlarmConfThresh15MinUASs) reached."
+ ::= { vdslNotifications 7 }
+
+ vdslDownMaxSnrMgnNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPhysCurrSnrMgn
+ }
+ STATUS current
+ DESCRIPTION
+ "The downstream Signal to Noise Margin exceeded
+ vdslLineConfDownMaxSnrMgn. The object
+ vdslPhysCurrSnrMgn will contain the Signal to Noise
+ margin as measured by the VTU-R."
+ ::= { vdslNotifications 8 }
+
+ vdslDownMinSnrMgnNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPhysCurrSnrMgn
+ }
+ STATUS current
+ DESCRIPTION
+ "The downstream Signal to Noise Margin fell below
+ vdslLineConfDownMinSnrMgn. The object vdslPhysCurrSnrMgn
+ will contain the Signal to Noise margin as measured by
+ the VTU-R."
+
+ ::= { vdslNotifications 9 }
+
+ vdslUpMaxSnrMgnNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPhysCurrSnrMgn
+ }
+ STATUS current
+ DESCRIPTION
+ "The upstream Signal to Noise Margin exceeded
+ vdslLineConfUpMaxSnrMgn. The object vdslPhysCurrSnrMgn
+ will contain the Signal to Noise margin as measured
+ by the VTU-C."
+ ::= { vdslNotifications 10 }
+
+ vdslUpMinSnrMgnNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPhysCurrSnrMgn
+ }
+ STATUS current
+ DESCRIPTION
+ "The upstream Signal to Noise Margin fell below
+ vdslLineConfUpMinSnrMgn. The object vdslPhysCurrSnrMgn
+ will contain the Signal to Noise margin as measured
+ by the VTU-C."
+ ::= { vdslNotifications 11 }
+
+ vdslInitFailureNotification NOTIFICATION-TYPE
+ OBJECTS {
+ vdslPhysCurrStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Vtu initialization failed. See vdslPhysCurrStatus for
+ potential reasons."
+ ::= { vdslNotifications 12 }
+
+ -- conformance information
+
+ vdslConformance OBJECT IDENTIFIER ::= { vdslLineMib 3 }
+ vdslGroups OBJECT IDENTIFIER ::= { vdslConformance 1 }
+ vdslCompliances OBJECT IDENTIFIER ::= { vdslConformance 2 }
+
+ vdslLineMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which
+ manage VDSL interfaces."
+ MODULE -- this module
+ MANDATORY-GROUPS
+ {
+ vdslGroup,
+ vdslNotificationGroup
+ }
+ ::= { vdslCompliances 1 }
+
+ -- units of conformance
+
+ vdslGroup OBJECT-GROUP
+ OBJECTS
+ {
+ vdslLineCoding,
+ vdslLineType,
+ vdslLineConfProfile,
+ vdslLineAlarmConfProfile,
+ vdslPhysInvSerialNumber,
+ vdslPhysInvVendorID,
+ vdslPhysInvVersionNumber,
+ vdslPhysCurrSnrMgn,
+ vdslPhysCurrAtn,
+ vdslPhysCurrStatus,
+ vdslPhysCurrOutputPwr,
+ vdslPhysCurrAttainableRate,
+ vdslPhysCurrLineRate,
+ vdslChanInterleaveDelay,
+ vdslChanCrcBlockLength,
+ vdslChanCurrTxRate,
+ vdslChanCurrTxSlowBurstProtect,
+ vdslChanCurrTxFastFec,
+ vdslPerfDataValidIntervals,
+ vdslPerfDataInvalidIntervals,
+ vdslPerfDataLofs,
+ vdslPerfDataLoss,
+ vdslPerfDataLprs,
+ vdslPerfDataLols,
+ vdslPerfDataESs,
+ vdslPerfDataSESs,
+ vdslPerfDataUASs,
+ vdslPerfDataInits,
+ vdslPerfDataCurr15MinTimeElapsed,
+ vdslPerfDataCurr15MinLofs,
+ vdslPerfDataCurr15MinLoss,
+ vdslPerfDataCurr15MinLprs,
+ vdslPerfDataCurr15MinLols,
+ vdslPerfDataCurr15MinESs,
+ vdslPerfDataCurr15MinSESs,
+ vdslPerfDataCurr15MinUASs,
+ vdslPerfDataCurr15MinInits,
+ vdslPerfData1DayValidIntervals,
+ vdslPerfData1DayInvalidIntervals,
+ vdslPerfDataCurr1DayTimeElapsed,
+ vdslPerfDataCurr1DayLofs,
+ vdslPerfDataCurr1DayLoss,
+ vdslPerfDataCurr1DayLprs,
+ vdslPerfDataCurr1DayLols,
+ vdslPerfDataCurr1DayESs,
+ vdslPerfDataCurr1DaySESs,
+ vdslPerfDataCurr1DayUASs,
+ vdslPerfDataCurr1DayInits,
+ vdslPerfIntervalLofs,
+ vdslPerfIntervalLoss,
+ vdslPerfIntervalLprs,
+ vdslPerfIntervalLols,
+ vdslPerfIntervalESs,
+ vdslPerfIntervalSESs,
+ vdslPerfIntervalUASs,
+ vdslPerfIntervalInits,
+ vdslPerf1DayIntervalMoniSecs,
+ vdslPerf1DayIntervalLofs,
+ vdslPerf1DayIntervalLoss,
+ vdslPerf1DayIntervalLprs,
+ vdslPerf1DayIntervalLols,
+ vdslPerf1DayIntervalESs,
+ vdslPerf1DayIntervalSESs,
+ vdslPerf1DayIntervalUASs,
+ vdslPerf1DayIntervalInits,
+ vdslChanValidIntervals,
+ vdslChanInvalidIntervals,
+ vdslChanFixedOctets,
+ vdslChanBadBlks,
+ vdslChanCurr15MinTimeElapsed,
+ vdslChanCurr15MinFixedOctets,
+ vdslChanCurr15MinBadBlks,
+ vdslChan1DayValidIntervals,
+ vdslChan1DayInvalidIntervals,
+ vdslChanCurr1DayTimeElapsed,
+ vdslChanCurr1DayFixedOctets,
+ vdslChanCurr1DayBadBlks,
+ vdslChanIntervalFixedOctets,
+ vdslChanIntervalBadBlks,
+ vdslChan1DayIntervalMoniSecs,
+ vdslChan1DayIntervalFixedOctets,
+ vdslChan1DayIntervalBadBlks,
+ vdslLineConfDownRateMode,
+ vdslLineConfUpRateMode,
+ vdslLineConfDownMaxPwr,
+ vdslLineConfUpMaxPwr,
+ vdslLineConfDownMaxSnrMgn,
+ vdslLineConfDownMinSnrMgn,
+ vdslLineConfDownTargetSnrMgn,
+ vdslLineConfUpMaxSnrMgn,
+ vdslLineConfUpMinSnrMgn,
+ vdslLineConfUpTargetSnrMgn,
+ vdslLineConfDownFastMaxDataRate,
+ vdslLineConfDownFastMinDataRate,
+ vdslLineConfDownSlowMaxDataRate,
+ vdslLineConfDownSlowMinDataRate,
+ vdslLineConfUpFastMaxDataRate,
+ vdslLineConfUpFastMinDataRate,
+ vdslLineConfUpSlowMaxDataRate,
+ vdslLineConfUpSlowMinDataRate,
+ vdslLineConfDownRateRatio,
+ vdslLineConfUpRateRatio,
+ vdslLineConfDownMaxInterDelay,
+ vdslLineConfUpMaxInterDelay,
+ vdslLineConfDownPboControl,
+ vdslLineConfUpPboControl,
+ vdslLineConfDownPboLevel,
+ vdslLineConfUpPboLevel,
+ vdslLineConfDeploymentScenario,
+ vdslLineConfAdslPresence,
+ vdslLineConfApplicableStandard,
+ vdslLineConfBandPlan,
+ vdslLineConfBandPlanFx,
+ vdslLineConfBandOptUsage,
+ vdslLineConfUpPsdTemplate,
+ vdslLineConfDownPsdTemplate,
+ vdslLineConfHamBandMask,
+ vdslLineConfCustomNotch1Start,
+ vdslLineConfCustomNotch1Stop,
+ vdslLineConfCustomNotch2Start,
+ vdslLineConfCustomNotch2Stop,
+ vdslLineConfDownTargetSlowBurst,
+ vdslLineConfUpTargetSlowBurst,
+ vdslLineConfDownMaxFastFec,
+ vdslLineConfUpMaxFastFec,
+ vdslLineConfLineType,
+ vdslLineConfProfRowStatus,
+ vdslLineAlarmConfThresh15MinLofs,
+ vdslLineAlarmConfThresh15MinLoss,
+ vdslLineAlarmConfThresh15MinLprs,
+ vdslLineAlarmConfThresh15MinLols,
+ vdslLineAlarmConfThresh15MinESs,
+ vdslLineAlarmConfThresh15MinSESs,
+ vdslLineAlarmConfThresh15MinUASs,
+ vdslLineAlarmConfInitFailure,
+ vdslLineAlarmConfProfRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about
+ a VDSL Line."
+ ::= { vdslGroups 1 }
+
+ vdslNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS
+ {
+ vdslPerfLofsThreshNotification,
+ vdslPerfLossThreshNotification,
+ vdslPerfLprsThreshNotification,
+ vdslPerfLolsThreshNotification,
+ vdslPerfESsThreshNotification,
+ vdslPerfSESsThreshNotification,
+ vdslPerfUASsThreshNotification,
+ vdslDownMaxSnrMgnNotification,
+ vdslDownMinSnrMgnNotification,
+ vdslUpMaxSnrMgnNotification,
+ vdslUpMinSnrMgnNotification,
+ vdslInitFailureNotification
+ }
+ STATUS current
+ DESCRIPTION
+ "This group supports notifications of significant
+ conditions associated with VDSL Lines."
+ ::= { vdslGroups 2 }
+
+ END
|