diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/VDSL2-LINE-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/VDSL2-LINE-MIB')
| -rw-r--r-- | MIBS/VDSL2-LINE-MIB | 7272 |
1 files changed, 7272 insertions, 0 deletions
diff --git a/MIBS/VDSL2-LINE-MIB b/MIBS/VDSL2-LINE-MIB new file mode 100644 index 0000000..a103741 --- /dev/null +++ b/MIBS/VDSL2-LINE-MIB @@ -0,0 +1,7272 @@ +VDSL2-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ transmission,
+ Unsigned32,
+ NOTIFICATION-TYPE,
+ Integer32,
+ Counter32
+ FROM SNMPv2-SMI
+
+ ifIndex
+ FROM IF-MIB
+
+ TruthValue,
+ RowStatus
+ FROM SNMPv2-TC
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+
+ Adsl2LConfProfPmMode
+ FROM ADSL2-LINE-TC-MIB
+
+ HCPerfIntervalThreshold,
+ HCPerfTimeElapsed
+ FROM HC-PerfHist-TC-MIB -- [RFC3705]
+
+ Xdsl2Unit,
+ Xdsl2Direction,
+ Xdsl2Band,
+ Xdsl2TransmissionModeType,
+ Xdsl2RaMode,
+ Xdsl2InitResult,
+ Xdsl2OperationModes,
+ Xdsl2PowerMngState,
+ Xdsl2ConfPmsForce,
+ Xdsl2LinePmMode,
+ Xdsl2LineLdsf,
+ Xdsl2LdsfResult,
+ Xdsl2LineBpsc,
+
+ Xdsl2BpscResult,
+ Xdsl2LineReset,
+ Xdsl2SymbolProtection,
+ Xdsl2SymbolProtection8,
+ Xdsl2MaxBer,
+ Xdsl2ChInitPolicy,
+ Xdsl2ScMaskDs,
+ Xdsl2ScMaskUs,
+ Xdsl2CarMask,
+ Xdsl2RfiBands,
+ Xdsl2PsdMaskDs,
+ Xdsl2PsdMaskUs,
+ Xdsl2Tssi,
+ Xdsl2LastTransmittedState,
+ Xdsl2LineStatus,
+ Xdsl2ChInpReport,
+ Xdsl2ChAtmStatus,
+ Xdsl2ChPtmStatus,
+ Xdsl2UpboKLF,
+ Xdsl2BandUs,
+ Xdsl2LineProfiles,
+ Xdsl2LineUs0Mask,
+ Xdsl2LineClassMask,
+ Xdsl2LineLimitMask,
+ Xdsl2LineUs0Disable,
+ Xdsl2LinePsdMaskSelectUs,
+ Xdsl2LineCeFlag,
+ Xdsl2LineSnrMode,
+ Xdsl2LineTxRefVnDs,
+ Xdsl2LineTxRefVnUs,
+ Xdsl2BitsAlloc,
+ Xdsl2MrefPsdDs,
+ Xdsl2MrefPsdUs
+
+ FROM VDSL2-LINE-TC-MIB -- [This document]
+
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP,
+ NOTIFICATION-GROUP
+ FROM SNMPv2-CONF;
+
+vdsl2MIB MODULE-IDENTITY
+ LAST-UPDATED "200909300000Z" -- September 30, 2009
+ ORGANIZATION "ADSLMIB Working Group"
+ CONTACT-INFO "WG-email: adslmib@ietf.org
+ Info: https://www1.ietf.org/mailman/listinfo/adslmib
+
+ Chair: Mike Sneed
+ Sand Channel Systems
+ Postal: P.O. Box 37324
+ Raleigh NC 27627-732
+ Email: sneedmike@hotmail.com
+ Phone: +1 206 600 7022
+
+ Co-Chair: Menachem Dodge
+ ECI Telecom Ltd.
+ Postal: 30 Hasivim St.
+ Petach Tikva 49517,
+ Israel.
+ Email: mbdodge@ieee.org
+ Phone: +972 3 926 8421
+
+ Co-editor: Moti Morgenstern
+ ECI Telecom Ltd.
+ Postal: 30 Hasivim St.
+ Petach Tikva 49517,
+ Israel.
+ Email: moti.morgenstern@ecitele.com
+ Phone: +972 3 926 6258
+
+ Co-editor: Scott Baillie
+ NEC Australia
+ Postal: 649-655 Springvale Road,
+ Mulgrave, Victoria 3170,
+ Australia.
+ Email: scott.baillie@nec.com.au
+ Phone: +61 3 9264 3986
+
+ Co-editor: Umberto Bonollo
+ NEC Australia
+ Postal: 649-655 Springvale Road,
+ Mulgrave, Victoria 3170,
+ Australia.
+ Email: umberto.bonollo@nec.com.au
+ Phone: +61 3 9264 3385
+ "
+ DESCRIPTION
+ "
+ This document defines a Management Information Base (MIB)
+ module for use with network management protocols in the
+ Internet community for the purpose of managing VDSL2, ADSL,
+ ADSL2, and ADSL2+ lines.
+
+ The MIB module described in RFC 2662 [RFC2662] defines
+ objects used for managing Asymmetric Bit-Rate DSL (ADSL)
+
+ interfaces per [T1E1.413], [G.992.1], and [G.992.2].
+ These object descriptions are based upon the specifications
+ for the ADSL Embedded Operations Channel (EOC) as defined
+ in American National Standards Institute (ANSI) T1E1.413
+ [T1E1.413] and International Telecommunication Union (ITU-T)
+ G.992.1 [G.992.1] and G.992.2 [G.992.2].
+
+ The MIB module described in RFC 4706 [RFC4706] defines
+ objects used for managing ADSL2 interfaces per [G.992.3]
+ and [G.992.4], and ADSL2+ interfaces per [G.992.5]. That MIB
+ is also capable of managing ADSL interfaces per [T1E1.413],
+ [G.992.1], and [G.992.2].
+
+ This document does not obsolete RFC 2662 [RFC2662] or
+ RFC 4706 [RFC4706], but rather provides a more comprehensive
+ management model that manages VDSL2 interfaces per G.993.2
+ [G.993.2] as well as ADSL, ADSL2, and ADSL2+ technologies
+ per T1E1.413, G.992.1, G.992.2, G.992.3, G.992.4, and
+ G.992.5
+ ([T1E1.413], [G.992.1], [G.992.2], [G.992.3], [G.992.4], and
+ [G.992.5], respectively).
+
+ Additionally, the management framework for VDSL2 lines
+ specified by the Digital Subscriber Line Forum
+ (DSLF) has been taken into consideration [TR-129]. That
+ framework is based on the ITU-T G.997.1 standard [G.997.1] and
+ its amendment 1 [G.997.1-Am1].
+
+ The MIB module is located in the MIB tree under MIB 2
+ transmission, as discussed in the MIB-2 Integration (RFC 2863
+ [RFC2863]) section of this document.
+
+ Copyright (c) 2009 IETF Trust and the persons identified
+ as authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with
+ or without modification, are permitted provided that the
+ following conditions are met:
+
+ - Redistributions of source code must retain the above
+ copyright notice, this list of conditions and the
+ following disclaimer.
+
+ - Redistributions in binary form must reproduce the above
+ copyright notice, this list of conditions and the
+ following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ - Neither the name of Internet Society, IETF or IETF Trust,
+ nor the names of specific contributors, may be used to
+ endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ This version of this MIB module is part of RFC 5650;
+ see the RFC itself for full legal notices."
+
+ REVISION "200909300000Z" -- September 30, 2009
+ DESCRIPTION "Initial version, published as RFC 5650."
+ ::= { transmission 251 }
+
+ xdsl2Notifications OBJECT IDENTIFIER ::= { vdsl2MIB 0 }
+ xdsl2Objects OBJECT IDENTIFIER ::= { vdsl2MIB 1 }
+ xdsl2Conformance OBJECT IDENTIFIER ::= { vdsl2MIB 2 }
+ ------------------------------------------------
+ xdsl2Line OBJECT IDENTIFIER ::= { xdsl2Objects 1 }
+ xdsl2Status OBJECT IDENTIFIER ::= { xdsl2Objects 2 }
+ xdsl2Inventory OBJECT IDENTIFIER ::= { xdsl2Objects 3 }
+ xdsl2PM OBJECT IDENTIFIER ::= { xdsl2Objects 4 }
+ xdsl2Profile OBJECT IDENTIFIER ::= { xdsl2Objects 5 }
+ xdsl2Scalar OBJECT IDENTIFIER ::= { xdsl2Objects 6 }
+ ------------------------------------------------
+ xdsl2PMLine OBJECT IDENTIFIER ::= { xdsl2PM 1 }
+ xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 }
+ ------------------------------------------------
+ xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 }
+ xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 }
+ xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 }
+ ------------------------------------------------
+ xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
+ ------------------------------------------------
+
+------------------------------------------------
+
+-- xdsl2LineTable --
+------------------------------------------------
+
+xdsl2LineTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineTable contains configuration, command and
+ status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
+
+ Several objects in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2Line 1 }
+
+xdsl2LineEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of this table is an interface index where the
+ interface has an ifType of vdsl2(251)."
+ INDEX { ifIndex }
+ ::= { xdsl2LineTable 1 }
+
+Xdsl2LineEntry ::=
+ SEQUENCE {
+ xdsl2LineConfTemplate SnmpAdminString,
+ xdsl2LineConfFallbackTemplate SnmpAdminString,
+ xdsl2LineAlarmConfTemplate SnmpAdminString,
+ xdsl2LineCmndConfPmsf Xdsl2ConfPmsForce,
+ xdsl2LineCmndConfLdsf Xdsl2LineLdsf,
+ xdsl2LineCmndConfLdsfFailReason Xdsl2LdsfResult,
+ xdsl2LineCmndConfBpsc Xdsl2LineBpsc,
+ xdsl2LineCmndConfBpscFailReason Xdsl2BpscResult,
+ xdsl2LineCmndConfBpscRequests Counter32,
+ xdsl2LineCmndAutomodeColdStart TruthValue,
+ xdsl2LineCmndConfReset Xdsl2LineReset,
+ xdsl2LineStatusActTemplate SnmpAdminString,
+ xdsl2LineStatusXtuTransSys Xdsl2TransmissionModeType,
+ xdsl2LineStatusPwrMngState Xdsl2PowerMngState,
+ xdsl2LineStatusInitResult Xdsl2InitResult,
+ xdsl2LineStatusLastStateDs Xdsl2LastTransmittedState,
+ xdsl2LineStatusLastStateUs Xdsl2LastTransmittedState,
+ xdsl2LineStatusXtur Xdsl2LineStatus,
+ xdsl2LineStatusXtuc Xdsl2LineStatus,
+ xdsl2LineStatusAttainableRateDs Unsigned32,
+ xdsl2LineStatusAttainableRateUs Unsigned32,
+
+ xdsl2LineStatusActPsdDs Integer32,
+ xdsl2LineStatusActPsdUs Integer32,
+ xdsl2LineStatusActAtpDs Integer32,
+ xdsl2LineStatusActAtpUs Integer32,
+ xdsl2LineStatusActProfile Xdsl2LineProfiles,
+ xdsl2LineStatusActLimitMask Xdsl2LineLimitMask,
+ xdsl2LineStatusActUs0Mask Xdsl2LineUs0Mask,
+ xdsl2LineStatusActSnrModeDs Xdsl2LineSnrMode,
+ xdsl2LineStatusActSnrModeUs Xdsl2LineSnrMode,
+ xdsl2LineStatusElectricalLength Unsigned32,
+ xdsl2LineStatusTssiDs Xdsl2Tssi,
+ xdsl2LineStatusTssiUs Xdsl2Tssi,
+ xdsl2LineStatusMrefPsdDs Xdsl2MrefPsdDs,
+ xdsl2LineStatusMrefPsdUs Xdsl2MrefPsdUs,
+ xdsl2LineStatusTrellisDs TruthValue,
+ xdsl2LineStatusTrellisUs TruthValue,
+ xdsl2LineStatusActualCe Unsigned32
+ }
+
+xdsl2LineConfTemplate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the xDSL2
+ Line Configuration Template Table, xdsl2LineConfTemplateTable,
+ that applies for this line.
+
+ This object MUST be maintained in a persistent manner."
+ REFERENCE "DSL Forum TR-129, paragraph #5.1"
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineEntry 1 }
+
+xdsl2LineConfFallbackTemplate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to identify the template that will be
+ used if the xDSL2 line fails to operate using the primary
+ template. The primary template is identified using the
+ xdsl2LineConfTemplate object.
+
+ For example, a xDSL2 line may fall back to a template with a
+ lower rate if the rate specified in the primary template
+ cannot be achieved.
+
+ The value of this object identifies a row in the xDSL2 Line
+
+ Configuration Template Table, xdsl2LineConfTemplateTable.
+ Any row in the xdsl2LineConfTemplateTable table may be used as a
+ fall-back template.
+
+ If the xDSL2 line fails to operate using the fall-back template,
+ then the primary template should be retried.
+ The xTU-C should continue to alternate between the primary and
+ fall-back templates until one of them succeeds.
+
+ If the value of this object is a zero-length string, then no
+ fall-back template is defined and only the primary template will
+ be used.
+
+ Note that implementation of this object is not mandatory.
+ If this object is not supported, any attempt to modify this
+ object should result in the SET request being rejected.
+
+ This object MUST be maintained in a persistent manner."
+ ::= { xdsl2LineEntry 2 }
+
+xdsl2LineAlarmConfTemplate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the xDSL2
+ Line Alarm Configuration Template Table,
+ xdsl2LineAlarmConfTemplateTable, which applies to this line.
+
+ This object MUST be maintained in a persistent manner."
+ REFERENCE "DSL Forum TR-129, paragraph #5.1"
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineEntry 3 }
+
+xdsl2LineCmndConfPmsf OBJECT-TYPE
+ SYNTAX Xdsl2ConfPmsForce
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power management state forced (PMSF). Defines the line
+ states to be forced by the near-end xTU on this line.
+ This object MUST be maintained in a persistent manner."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3 (PMSF)"
+ DEFVAL { l3toL0 }
+ ::= { xdsl2LineEntry 4 }
+
+xdsl2LineCmndConfLdsf OBJECT-TYPE
+ SYNTAX Xdsl2LineLdsf
+
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Loop diagnostic state forced (LDSF).
+ Defines whether the line should be forced into the loop
+ diagnostics mode by the near-end xTU of this line. Note that
+ a loop diagnostic may be initiated by the far-end xTU at any
+ time.
+
+ Only when the xdsl2LineStatusPwrMngState object is in the
+ 'l3' state and the xdsl2LineCmndConfPmsf object is in the
+ 'l0orL2toL3' state, can the line be forced into loop diagnostic
+ mode procedures. Upon successful completion of the loop
+ diagnostic mode procedures, the Access Node shall set this
+ object to 'inhibit', and xdsl2LineStatusPwrMngState will
+ remain in the 'l3' state. The loop diagnostic data shall be
+ available at least until xdsl2LineCmndConfPmsf is set to the
+ 'l3toL0' state.
+
+ The results of the loop diagnostic procedure are stored in the
+ tables xdsl2SCStatusTable, xdsl2SCStatusBandTable, and
+ xdsl2SCStatusSegmentTable. The status of the loop diagnostic
+ procedure is indicated by xdsl2LineCmndConfLdsfFailReason.
+
+ As long as loop diagnostic procedures are not completed
+ successfully, attempts shall be made to do so, until the loop
+ diagnostic mode is no longer forced on the line through this
+ configuration parameter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8 (LDSF)"
+ DEFVAL { inhibit }
+ ::= { xdsl2LineEntry 5 }
+
+xdsl2LineCmndConfLdsfFailReason OBJECT-TYPE
+ SYNTAX Xdsl2LdsfResult
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the most recent occasion when the loop
+ diagnostics state forced (LDSF) command was issued for the
+ associated line."
+ DEFVAL { none }
+ ::= { xdsl2LineEntry 6 }
+
+xdsl2LineCmndConfBpsc OBJECT-TYPE
+ SYNTAX Xdsl2LineBpsc
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+
+ "Request a bits-per-subcarrier measurement to be made.
+
+ A request for a bits-per-subcarrier measurement is made by
+ setting this object to the value of 'measure'. Upon
+ completion of the measurement request, the Access Node shall set
+ this object to 'idle'.
+
+ The SNMP agent should allow initiating a bits-per-subcarrier
+ measurement process only if there is no other bits-per-subcarrier
+ measurement already running, and respond with an SNMP error
+ (e.g., wrongValue) otherwise.
+
+ Note that a bits-per-subcarrier measurement is also performed
+ during a line diagnostic procedure. This object provides an
+ additional mechanism to fetch the bits-per-subcarrier data. This
+ additional mechanism is provided so that bits-per-subcarrier
+ data may be fetched without forcing the line into no power state.
+ This is useful because the bits-per-subcarrier allocation may be
+ adjusted at show time due to rate adaption and bit swapping.
+
+ The implementation of this additional mechanism for measuring
+ bits per subcarrier is not mandatory.
+
+ The results of the bits-per-subcarrier measurement are stored in
+ xdsl2LineSegmentTable. The status of the bits-per-subcarrier
+ measurement is indicated by
+ xdsl2LineCmndConfBpscFailReason."
+ DEFVAL { idle }
+ ::= { xdsl2LineEntry 7 }
+
+xdsl2LineCmndConfBpscFailReason OBJECT-TYPE
+ SYNTAX Xdsl2BpscResult
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the most recent bits-per-subcarrier
+ measurement request issued for the associated line."
+ DEFVAL { none }
+ ::= { xdsl2LineEntry 8 }
+
+xdsl2LineCmndConfBpscRequests OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Measurement request counter.
+ This counter is incremented by one every time a request for a
+ bits-per-subcarrier measurement is made. A measurement request
+
+ is made by modifying the xdsl2LineCmndConfBpsc object from
+ idle(1) to the value measure(2).
+
+ The measurement results may be very large and will not fit
+ into a single PDU; hence, multiple SNMP GET requests may be
+ required to fetch the measurement results.
+ Because the measurement results cannot be fetched atomically,
+ it is possible for a second manager to start a new measurement
+ before a first manager has fetched all of its results.
+ An SNMP manager can use this object to ensure that the
+ measurement results retrieved using one or more GET requests
+ all belong to the measurement initiated by that manager.
+
+ The following steps are suggested in order for the SNMP
+ manager to initiate the bits-per-subcarrier measurement:
+
+ 1. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
+ 2. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
+ 3. Wait a short delay (4 -> 8 seconds).
+ 4. Perform an SNMP SET on xdsl2LineCmndConfBpsc with
+ the value measure(2).
+ 5. If step 4 returns an error, then go to step 1.
+ 6. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
+ 7. Fetch measurement results using one or more GET PDUs.
+ 8. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
+ 9. Compute the difference between the two values of
+ xdsl2LineCmndConfBpscRequests. If the value is one,
+ then the results are valid, else go to step 1."
+ ::= { xdsl2LineEntry 9 }
+
+xdsl2LineCmndAutomodeColdStart OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Automode cold start forced. This parameter is defined in
+ order to improve testing of the performance of xTUs supporting
+ automode when it is enabled in the MIB.
+ Change the value of this parameter to 'true' to indicate a change
+ in loop conditions applied to the devices under the test. The
+ xTUs shall reset any historical information used for automode
+ and for shortening G.994.1 handshake and initialization.
+
+ Automode is the case where multiple operation-modes are enabled
+ through the xdsl2LConfProfXtuTransSysEna object in the line
+ configuration profile being used for the line, and where the
+ selection of the actual operation-mode depends not only on the
+ common capabilities of both xTUs (as exchanged in G.994.1), but
+
+ also on achievable data rates under given loop conditions."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10
+ (Automode Cold Start Forced)"
+ DEFVAL { false }
+ ::= { xdsl2LineEntry 10 }
+
+xdsl2LineCmndConfReset OBJECT-TYPE
+ SYNTAX Xdsl2LineReset
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Request a line reset to occur.
+ If this object is set to the value of 'reset', then force
+ the line to reset (i.e., the modems will retrain).
+ When the line has successfully reset, the SNMP agent will
+ set the value of this object to 'idle'.
+
+ Note that the xdsl2LineCmndConfPmsf object will always take
+ precedence over this object.
+ If the xdsl2LineCmndConfPmsf object is set to the value
+ 'l0orL2toL3', then the line MUST NOT return to the Showtime
+ state due to a reset request action performed using this
+ object."
+ DEFVAL { idle }
+ ::= { xdsl2LineEntry 11 }
+
+xdsl2LineStatusActTemplate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is used to identify the template that is
+ currently in use for this line.
+ This object is updated when a successful line initialization
+ occurs.
+ This object indicates if the primary template
+ (xdsl2LineConfTemplate) is in use or the fall-back template
+ (xdsl2LineConfFallbackTemplate) is in use.
+ If the line is not successfully initialized, then the value of
+ this object will be a zero-length string."
+ ::= { xdsl2LineEntry 12 }
+
+xdsl2LineStatusXtuTransSys OBJECT-TYPE
+ SYNTAX Xdsl2TransmissionModeType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The xTU Transmission System (xTS) in use.
+
+ It is coded in a bitmap representation with one bit set to
+ '1' (the selected coding for the DSL line). This
+ parameter may be derived from the handshaking procedures defined
+ in Recommendation G.994.1. A set of xDSL line transmission
+ modes, with one bit per mode."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1
+ (xDSL transmission system)"
+ DEFVAL { {} }
+ ::= { xdsl2LineEntry 13 }
+
+xdsl2LineStatusPwrMngState OBJECT-TYPE
+ SYNTAX Xdsl2PowerMngState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current power management state."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.5
+ (Line power management state)"
+ DEFVAL { l3 }
+ ::= { xdsl2LineEntry 14 }
+
+xdsl2LineStatusInitResult OBJECT-TYPE
+ SYNTAX Xdsl2InitResult
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the result of the last full initialization
+ performed on the line."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.6
+ (Initialization success/failure cause)"
+ DEFVAL { noFail }
+ ::= { xdsl2LineEntry 15 }
+
+xdsl2LineStatusLastStateDs OBJECT-TYPE
+ SYNTAX Xdsl2LastTransmittedState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last successful transmitted initialization state in
+ the downstream direction in the last full initialization
+ performed on the line."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.7
+ (Downstream last transmitted state)"
+ DEFVAL { atucG9941 }
+ ::= { xdsl2LineEntry 16 }
+
+xdsl2LineStatusLastStateUs OBJECT-TYPE
+ SYNTAX Xdsl2LastTransmittedState
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last successful transmitted initialization state in the
+ upstream direction in the last full initialization performed on
+ the line."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8
+ (Upstream last transmitted state)"
+ DEFVAL { aturG9941 }
+ ::= { xdsl2LineEntry 17 }
+
+xdsl2LineStatusXtur OBJECT-TYPE
+ SYNTAX Xdsl2LineStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current state (existing failures) of the xTU-R.
+ This is a bitmap of possible conditions."
+ REFERENCE "ITU-T G.997.1, paragraph #7.1.1.2
+ (Line far-end failures)"
+ DEFVAL { { noDefect } }
+ ::= { xdsl2LineEntry 18 }
+
+xdsl2LineStatusXtuc OBJECT-TYPE
+ SYNTAX Xdsl2LineStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current state (existing failures) of the xTU-C.
+ This is a bitmap of possible conditions."
+ REFERENCE "ITU-T G.997.1, paragraph #7.1.1.1
+ (Line near-end failures)"
+ DEFVAL { { noDefect } }
+ ::= { xdsl2LineEntry 19 }
+
+xdsl2LineStatusAttainableRateDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Attainable Data Rate Downstream.
+ The maximum downstream net data rate currently attainable by
+ the xTU-C transmitter and the xTU-R receiver, coded in
+ bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineEntry 20 }
+
+xdsl2LineStatusAttainableRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Attainable Data Rate Upstream.
+ The maximum upstream net data rate currently attainable by the
+ xTU-R transmitter and the xTU-C receiver, coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.20 (ATTNDRus)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineEntry 21 }
+
+xdsl2LineStatusActPsdDs OBJECT-TYPE
+ SYNTAX Integer32 (-900..0 | 2147483647)
+ UNITS "0.1 dBm/Hz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Power Spectral Density (PSD) Downstream. The average
+ downstream transmit PSD over the subcarriers used for downstream.
+ It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
+ -90 to 0 dBm/Hz).
+ A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+ out of range to be represented."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.21 (ACTPSDds)"
+ DEFVAL { 2147483647 }
+ ::= { xdsl2LineEntry 22 }
+
+xdsl2LineStatusActPsdUs OBJECT-TYPE
+ SYNTAX Integer32 (-900..0 | 2147483647)
+ UNITS "0.1 dBm/Hz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Power Spectral Density (PSD) Upstream. The average
+ upstream transmit PSD over the subcarriers used for upstream.
+ It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
+ -90 to 0 dBm/Hz).
+ A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+ out of range to be represented."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.22 (ACTPSDus)"
+ DEFVAL { 2147483647 }
+ ::= { xdsl2LineEntry 23 }
+
+xdsl2LineStatusActAtpDs OBJECT-TYPE
+ SYNTAX Integer32 (-310..310 | 2147483647)
+ UNITS "0.1 dBm"
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Aggregate Transmit Power Downstream.
+ The total amount of transmit power delivered by the xTU-C at
+ the U-C reference point, at the instant of measurement. It
+ ranges from -310 to 310 units of 0.1 dBm (physical values are -31
+ to 31 dBm).
+ A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+ out of range to be represented."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.24 (ACTATPds)"
+ DEFVAL { 2147483647 }
+ ::= { xdsl2LineEntry 24 }
+
+xdsl2LineStatusActAtpUs OBJECT-TYPE
+ SYNTAX Integer32 (-310..310 | 2147483647)
+ UNITS "0.1 dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Aggregate Transmit Power Upstream.
+ The total amount of transmit power delivered by the xTU-R at the
+ U-R reference point, at the instant of measurement. It ranges
+ from -310 to 310 units of 0.1 dBm (physical values are -31
+ to 31 dBm).
+ A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+ out of range to be represented."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.25 (ACTATPus)"
+ DEFVAL { 2147483647 }
+ ::= { xdsl2LineEntry 25 }
+
+xdsl2LineStatusActProfile OBJECT-TYPE
+ SYNTAX Xdsl2LineProfiles
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The G.993.2 profile in use.
+ The configuration parameter xdsl2LConfProfProfiles defines
+ the set of allowed G.993.2 profiles. This parameter indicates
+ the profile in use on this line.
+ This parameter may be derived from the handshaking procedures
+ defined in ITU-T Recommendation G.994.1."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2 (VDSL2 Profile)"
+ DEFVAL { {} }
+ ::= { xdsl2LineEntry 26 }
+
+xdsl2LineStatusActLimitMask OBJECT-TYPE
+ SYNTAX Xdsl2LineLimitMask
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Limit PSD mask and band plan in use.
+ The configuration parameter xdsl2LConfProfLimitMask defines
+ the set of allowed G.993.2 limit PSD masks.
+ This parameter indicates the limit PSD mask in use on this
+ line."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3
+ (VDSL2 Limit PSD Mask and Band plan)"
+ DEFVAL { {} }
+ ::= { xdsl2LineEntry 27 }
+
+xdsl2LineStatusActUs0Mask OBJECT-TYPE
+ SYNTAX Xdsl2LineUs0Mask
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The US0 PSD mask in use.
+ The configuration parameter xdsl2LConfProfUs0Mask defines
+ the set of allowed US0 PSD masks.
+ This parameter indicates the US0 PSD mask in use on this line.
+ This parameter may be derived from the handshaking procedures
+ defined in ITU-T Recommendation G.994.1."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4
+ (VDSL2 US0 PSD Mask)"
+ DEFVAL { {} }
+ ::= { xdsl2LineEntry 28 }
+
+xdsl2LineStatusActSnrModeDs OBJECT-TYPE
+ SYNTAX Xdsl2LineSnrMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter indicates if the transmitter-referred
+ virtual noise is active on the line in the downstream
+ direction.
+ The configuration parameter xdsl2LConfProfSnrModeDs is used to
+ configure referred virtual noise."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
+ DEFVAL { virtualNoiseDisabled }
+ ::= { xdsl2LineEntry 29 }
+
+xdsl2LineStatusActSnrModeUs OBJECT-TYPE
+ SYNTAX Xdsl2LineSnrMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "This parameter indicates if the transmitter-referred virtual
+ noise is active on the line in the upstream direction.
+ The configuration parameter xdsl2LConfProfSnrModeUs is used to
+ configure referred virtual noise."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
+ DEFVAL { virtualNoiseDisabled }
+ ::= { xdsl2LineEntry 30 }
+
+xdsl2LineStatusElectricalLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1280)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter contains the estimated electrical length
+ expressed in dB at 1 MHz, kl0. This is the final electrical
+ length that would have been sent from the VTU-O to VTU-R if the
+ electrical length was not forced by the CO-MIB.
+ The value ranges from 0 to 128 dB in steps of 0.1 dB."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23 (UPBOKLE)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineEntry 31 }
+
+xdsl2LineStatusTssiDs OBJECT-TYPE
+ SYNTAX Xdsl2Tssi
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transmit spectrum shaping (TSSi) breakpoints expressed
+ as the set of breakpoints exchanged
+ during G.994.1 (Downstream)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)"
+ ::= { xdsl2LineEntry 32 }
+
+xdsl2LineStatusTssiUs OBJECT-TYPE
+ SYNTAX Xdsl2Tssi
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transmit spectrum shaping (TSSi) breakpoints expressed
+ as the set of breakpoints exchanged
+ during G.994.1 (Upstream)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.6 (TSSpsus)"
+ ::= { xdsl2LineEntry 33 }
+
+xdsl2LineStatusMrefPsdDs OBJECT-TYPE
+ SYNTAX Xdsl2MrefPsdDs
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "The MEDLEY Reference PSD status parameters
+ in the downstream
+ direction expressed as the set of breakpoints exchanged at
+ initialization."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.7 (MREFPSDds)"
+ ::= { xdsl2LineEntry 34 }
+
+xdsl2LineStatusMrefPsdUs OBJECT-TYPE
+ SYNTAX Xdsl2MrefPsdUs
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MEDLEY Reference PSD status parameters in the
+ upstream direction expressed as the set of breakpoints
+ exchanged at initialization."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.8 (MREFPSDus)"
+ ::= { xdsl2LineEntry 35 }
+
+xdsl2LineStatusTrellisDs OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter reports whether trellis coding is in use in
+ the downstream direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30 (TRELLISds)"
+ DEFVAL { false }
+ ::= { xdsl2LineEntry 36 }
+
+xdsl2LineStatusTrellisUs OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter reports whether trellis coding is in use in
+ the upstream direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31 (TRELLISus)"
+ DEFVAL { false }
+ ::= { xdsl2LineEntry 37 }
+
+xdsl2LineStatusActualCe OBJECT-TYPE
+ SYNTAX Unsigned32 (2..16)
+ UNITS "N/32 samples"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "(ACTUALCE)
+ This parameter reports the cyclic extension used on the line. It
+ is coded as an unsigned integer from 2 to 16 in units of N/32
+ samples, where 2N is the Inverse Discrete Fourier Transform
+ (IDFT) size."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32 (ACTUALCE)"
+ DEFVAL { 2 }
+ ::= { xdsl2LineEntry 38 }
+
+------------------------------------------------
+-- xdsl2LineSegmentTable --
+------------------------------------------------
+
+xdsl2LineSegmentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineSegmentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineSegmentTable contains status parameters
+ of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+ The parameters in this table are updated when a measurement
+ request is made using the xdsl2LineCmndConfBpsc object.
+
+ Note that a bits-per-subcarrier measurement is also performed
+ during a line diagnostic procedure. This table provides an
+ additional mechanism to fetch the bits-per-subcarrier data. This
+ additional mechanism is provided so that bits-per-subcarrier
+ data may be fetched without forcing the line into no power state.
+ This is useful because the bits-per-subcarrier allocation may be
+ adjusted at Showtime due to rate adaption and bit swapping.
+
+ The implementation of this additional mechanism for measuring
+ bits per subcarrier is not mandatory."
+ ::= { xdsl2Status 1 }
+
+xdsl2LineSegmentEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineSegmentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineSegmentEntry contains status parameters
+ of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+
+ Objects in the table refer to NSus and NSds. For G.993.2, the
+ value of NSus and NSds are, respectively, the indices of the
+ highest supported upstream and downstream subcarriers according
+ to the selected implementation profile. For ADSL, NSus is equal
+ to NSCus-1 and NSds is equal to NSCds-1.
+
+ One index of this table is an interface index where the interface
+ has an ifType of vdsl2(251). A second index of this table is the
+ transmission direction. A third index identifies the specific
+ segment of the subcarriers status addressed."
+ INDEX { ifIndex,
+ xdsl2LineSegmentDirection,
+ xdsl2LineSegment }
+ ::= { xdsl2LineSegmentTable 1 }
+
+Xdsl2LineSegmentEntry ::=
+ SEQUENCE {
+ xdsl2LineSegmentDirection Xdsl2Direction,
+ xdsl2LineSegment Unsigned32,
+ xdsl2LineSegmentBitsAlloc Xdsl2BitsAlloc,
+ xdsl2LineSegmentRowStatus RowStatus
+ }
+
+xdsl2LineSegmentDirection OBJECT-TYPE
+ SYNTAX Xdsl2Direction
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The direction of the subcarrier either
+ upstream or downstream."
+ ::= { xdsl2LineSegmentEntry 1 }
+
+xdsl2LineSegment OBJECT-TYPE
+ SYNTAX Unsigned32(1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The segment of the subcarriers status information
+ provided by this row.
+ Status parameters in this table are retrieved in segments.
+ The first segment of the status information is retrieved with
+ xdsl2LineSegment=1, the second segment is retrieved with
+ xdsl2LineSegment=2, and so on. When a status parameter is
+ retrieved in n segments where n<8) then, for that parameter,
+ GET operations for the remaining segment numbers (n+1 to 8) will
+ respond with a zero-length OCTET STRING."
+ ::= { xdsl2LineSegmentEntry 2 }
+
+xdsl2LineSegmentBitsAlloc OBJECT-TYPE
+ SYNTAX Xdsl2BitsAlloc
+ UNITS "bits"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "The bits allocation per subcarrier. An array of 256 octets
+ (512 nibbles), designed for supporting up to 512 (downstream)
+ subcarriers. When more than 512 subcarriers are supported, the
+ status information is reported through multiple (up to 8)
+ segments. The first segment is then used for the first 512
+ subcarriers. The second segment is used for the subcarriers
+ 512 to 1023 and so on.
+ The aggregate number of utilized nibbles in the downstream
+ direction (in all segments) depends on NSds; in the
+ upstream direction, it depends on NSus.
+ This value is referred to here as NS. The segment number is in
+ xdsl2SCStatusSegment.
+ Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+ segment is set to a value in the range 0 to 15 to indicate that
+ the respective downstream or upstream subcarrier j
+ (j=(segement-1)*512+i) has the same amount of bits
+ allocation."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
+ and paragraph #7.5.1.29.2 (BITSpsus)"
+ ::= { xdsl2LineSegmentEntry 3 }
+
+xdsl2LineSegmentRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Row Status. The SNMP agent will create a row in this table
+ for storing the results of a measurement performed on the
+ associated line, if the row does not already exist.
+
+ The SNMP manager is not permitted to create rows in this table or
+ set the row status to 'notInService'. In the first case,
+ if the SNMP manager tries to create a new row, the SNMP agent
+ responds with the value 'noCreation' in the error status
+ field of the response-PDU. In the latter case, the SNMP agent
+ responds with the value 'wrongValue' in the error status
+ field of the response-PDU.
+
+ The SNMP agent may have limited resources; therefore, if multiple
+ rows coexist in this table, it may fail to add new rows to this
+ table or allocate memory resources.
+ If that occurs, the SNMP agent responds with the value
+ 'noResources' (for the xdsl2LineCmndConfBpscFailReason
+ object in xdsl2LineTable).
+
+ The management system (the operator) may delete rows from this
+ table according to any scheme. For example, after retrieving
+ the results.
+
+ When the SNMP manager deletes any row in this table, the SNMP
+ agent MUST delete all rows in this table that have the same
+ ifIndex value."
+ ::= { xdsl2LineSegmentEntry 4 }
+
+------------------------------------------------
+-- xdsl2LineBandTable --
+------------------------------------------------
+
+xdsl2LineBandTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineBandEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineBandTable contains the, per-band line
+ status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
+ The parameters in this table are updated at line initialization
+ time and at Showtime."
+ ::= { xdsl2Line 2 }
+
+xdsl2LineBandEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineBandEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface
+ has an ifType of vdsl2(251). A second index of this table is a
+ per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+."
+ INDEX { ifIndex, xdsl2LineBand }
+ ::= { xdsl2LineBandTable 1 }
+
+Xdsl2LineBandEntry ::=
+ SEQUENCE {
+ xdsl2LineBand Xdsl2Band,
+ xdsl2LineBandStatusLnAtten Unsigned32,
+ xdsl2LineBandStatusSigAtten Unsigned32,
+ xdsl2LineBandStatusSnrMargin Integer32
+ }
+
+xdsl2LineBand OBJECT-TYPE
+ SYNTAX Xdsl2Band
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Identifies the band(s) associated with this line.
+ For ADSL/ADSL2/ADSL2+, the values 'upstream' and 'downstream'
+ will always be present.
+
+ For VDSL2, a subset of {'us0', 'ds1', 'us1' ... 'ds4', 'us4' }
+ will always be present, together with rows for
+ 'upstream' and 'downstream', in which only the
+ xdsl2LineBandStatusSnrMargin object is expected to hold a valid
+ (average) measurement."
+ ::= { xdsl2LineBandEntry 1 }
+
+xdsl2LineBandStatusLnAtten OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Line Attenuation.
+ When referring to a band in the downstream direction, it is
+ the measured difference in the total power transmitted by the
+ xTU-C and the total power received by the xTU-R over all
+ subcarriers of that band during initialization.
+
+ When referring to a band in the upstream direction, it is the
+ measured difference in the total power transmitted by the xTU-R
+ and the total power received by the xTU-C over all subcarriers of
+ that band during initialization.
+
+ Values range from 0 to 1270 in units of 0.1 dB (physical values
+ are 0 to 127 dB).
+ A special value of 0x7FFFFFFF (2147483647) indicates the line
+ attenuation is out of range to be represented.
+ A special value of 0x7FFFFFFE (2147483646) indicates the line
+ attenuation measurement is unavailable."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
+ and paragraph #7.5.1.10 (LATNus)6"
+ DEFVAL { 2147483646 }
+ ::= { xdsl2LineBandEntry 2 }
+
+xdsl2LineBandStatusSigAtten OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal Attenuation.
+ When referring to a band in the downstream direction, it is
+ the measured difference in the total power transmitted by the
+ xTU-C and the total power received by the xTU-R over all
+ subcarriers of that band during Showtime.
+
+ When referring to a band in the upstream direction, it is the
+
+ measured difference in the total power transmitted by the xTU-R
+ and the total power received by the xTU-C over all subcarriers of
+ that band during Showtime.
+
+ Values range from 0 to 1270 in units of 0.1 dB (physical values
+ are 0 to 127 dB).
+ A special value of 0x7FFFFFFF (2147483647) indicates the line
+ attenuation is out of range to be represented.
+ A special value of 0x7FFFFFFE (2147483646) indicates the line
+ attenuation measurement is unavailable."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
+ and paragraph #7.5.1.12 (SATNus)"
+ DEFVAL { 2147483646 }
+ ::= { xdsl2LineBandEntry 3 }
+
+xdsl2LineBandStatusSnrMargin OBJECT-TYPE
+ SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SNR Margin is the maximum increase in dB of the noise power
+ received at the xTU (xTU-R for a band in the downstream direction
+ and xTU-C for a band in the upstream direction), such that the
+ BER requirements are met for all bearer channels received at the
+ xTU. Values range from -640 to 630 in units of 0.1 dB (physical
+ values are -64 to 63 dB).
+ A special value of 0x7FFFFFFF (2147483647) indicates the SNR
+ Margin is out of range to be represented.
+ A special value of 0x7FFFFFFE (2147483646) indicates the SNR
+ Margin measurement is currently unavailable."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
+ and paragraph #7.5.1.14 (SNRMpbds)
+ and paragraph #7.5.1.16 (SNRMus)
+ and paragraph #7.5.1.17 (SNRMpbus)"
+ DEFVAL { 2147483646 }
+ ::= { xdsl2LineBandEntry 4 }
+
+------------------------------------------------
+-- xdsl2ChannelStatusTable --
+------------------------------------------------
+
+xdsl2ChannelStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2ChannelStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2ChannelStatusTable contains status
+
+ parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
+ This table contains live data from equipment."
+ ::= { xdsl2Status 2 }
+
+xdsl2ChannelStatusEntry OBJECT-TYPE
+ SYNTAX Xdsl2ChannelStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of a DSL channel. A second index of
+ this table is the termination unit."
+ INDEX { ifIndex, xdsl2ChStatusUnit }
+ ::= { xdsl2ChannelStatusTable 1 }
+
+Xdsl2ChannelStatusEntry ::=
+ SEQUENCE {
+ xdsl2ChStatusUnit Xdsl2Unit,
+ xdsl2ChStatusActDataRate Unsigned32,
+ xdsl2ChStatusPrevDataRate Unsigned32,
+ xdsl2ChStatusActDelay Unsigned32,
+ xdsl2ChStatusActInp Unsigned32,
+ xdsl2ChStatusInpReport Xdsl2ChInpReport,
+ xdsl2ChStatusNFec Unsigned32,
+ xdsl2ChStatusRFec Unsigned32,
+ xdsl2ChStatusLSymb Unsigned32,
+ xdsl2ChStatusIntlvDepth Unsigned32,
+ xdsl2ChStatusIntlvBlock Unsigned32,
+ xdsl2ChStatusLPath Unsigned32,
+ xdsl2ChStatusAtmStatus Xdsl2ChAtmStatus,
+ xdsl2ChStatusPtmStatus Xdsl2ChPtmStatus
+ }
+
+xdsl2ChStatusUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2ChannelStatusEntry 1 }
+
+xdsl2ChStatusActDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual net data rate at which the bearer channel is
+
+ operating, if in L0 power management state. In L1 or L2
+ states, it relates to the previous L0 state. The data rate is
+ coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.1
+ (Actual data rate)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 2 }
+
+xdsl2ChStatusPrevDataRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The previous net data rate that the bearer channel was
+ operating at just before the latest rate change event. This
+ could be a full or short initialization, fast retrain, DRA or
+ power management transitions, excluding transitions between L0
+ state and L1 or L2 states. The data rate is coded in
+ bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2
+ (Previous data rate)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 3 }
+
+xdsl2ChStatusActDelay OBJECT-TYPE
+ SYNTAX Unsigned32(0..8176)
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual one-way interleaving delay introduced by the
+ PMS-TC in the direction of the bearer channel, if in L0 power
+ management state. In L1 or L2 states, it relates to the previous
+ L0 state. It is coded in ms (rounded to the nearest ms)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.3
+ (Actual interleaving delay)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 4 }
+
+xdsl2ChStatusActInp OBJECT-TYPE
+ SYNTAX Unsigned32(0..255)
+ UNITS "0.1 symbols"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual impulse noise protection.
+ This parameter reports the actual impulse noise protection (INP)
+
+ on the bearer channel in the L0 state. In the L1 or L2 state,
+ the parameter contains the INP in the previous L0 state. For
+ ADSL, this value is computed according to the formula specified
+ in the relevant Recommendation based on the actual framing
+ parameters. For ITU-T Recommendation G.993.2, the method to
+ report this value is according to the INPREPORT parameter.
+ The value is coded in fractions of DMT symbols with a
+ granularity of 0.1 symbols. The range is from 0 to 25.4.
+ The special value of 255 indicates an ACTINP higher
+ than 25.4."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.4 (ACTINP)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 5 }
+
+xdsl2ChStatusInpReport OBJECT-TYPE
+ SYNTAX Xdsl2ChInpReport
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Impulse noise protection reporting mode."
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.5.2.5
+ (INPREPORT)"
+ DEFVAL { inpComputedUsingFormula }
+ ::= { xdsl2ChannelStatusEntry 6 }
+
+xdsl2ChStatusNFec OBJECT-TYPE
+ SYNTAX Unsigned32(0..255)
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual size of Reed-Solomon codeword.
+ This parameter reports the actual number of Reed-Solomon
+ redundancy bytes per codeword used in the latency path in which
+ the bearer channel is transported. The value is coded in bytes.
+ It ranges from 0 to 16.
+ The value 0 indicates no Reed-Solomon coding."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.1 (NFEC)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 7 }
+
+xdsl2ChStatusRFec OBJECT-TYPE
+ SYNTAX Unsigned32(0..16)
+ UNITS "bits"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual number of Reed-Solomon redundancy bytes.
+
+ This parameter reports the actual number of Reed-Solomon
+ redundancy bytes per codeword used in the latency path in which
+ the bearer channel is transported. The value is coded in bytes.
+ It ranges from 0 to 16.
+ The value 0 indicates no Reed-Solomon coding."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.2 (RFEC)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 8 }
+
+xdsl2ChStatusLSymb OBJECT-TYPE
+ SYNTAX Unsigned32(0..65535)
+ UNITS "bits"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual number of bits per symbol.
+ This parameter reports the actual number of bits per symbol
+ assigned to the latency path in which the bearer channel is
+ transported. This value does not include trellis overhead. The
+ value is coded in bits.
+ It ranges from 0 to 65535."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.3 (LSYMB)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 9 }
+
+xdsl2ChStatusIntlvDepth OBJECT-TYPE
+ SYNTAX Unsigned32(1..4096)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual interleaving depth.
+ This parameter reports the actual depth of the interleaver used
+ in the latency path in which the bearer channel is transported.
+ The value ranges from 1 to 4096 in steps of 1.
+ The value 1 indicates no interleaving."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.4 (INTLVDEPTH)"
+ DEFVAL { 1 }
+ ::= { xdsl2ChannelStatusEntry 10 }
+
+xdsl2ChStatusIntlvBlock OBJECT-TYPE
+ SYNTAX Unsigned32(4..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual interleaving block length.
+ This parameter reports the actual block length of the interleaver
+ used in the latency path in which the bearer channel is
+ transported.
+
+ The value ranges from 4 to 255 in steps of 1."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)"
+ DEFVAL { 4 }
+ ::= { xdsl2ChannelStatusEntry 11 }
+
+xdsl2ChStatusLPath OBJECT-TYPE
+ SYNTAX Unsigned32(0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual latency path.
+ This parameter reports the index of the actual latency path in
+ which the bearer is transported.
+ The valid values are 0, 1, 2 and 3.
+ For G.992.1, the FAST path shall be mapped to the latency
+ index 0, and the INTERLEAVED path shall be mapped to the latency
+ index 1."
+ REFERENCE "ITU-T G.997.1 amendment 1, paragraph #7.5.2.7
+ (LPATH)"
+ DEFVAL { 0 }
+ ::= { xdsl2ChannelStatusEntry 12 }
+
+xdsl2ChStatusAtmStatus OBJECT-TYPE
+ SYNTAX Xdsl2ChAtmStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates current state (existing failures) of the DSL
+ channel in case its Data Path is ATM. This is a bitmap of
+ possible conditions.
+ In case the channel is not of ATM Data Path, the object is set
+ to '0'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.1.4
+ (ATM data path failures)"
+ DEFVAL { { noDefect } }
+ ::= { xdsl2ChannelStatusEntry 13 }
+
+xdsl2ChStatusPtmStatus OBJECT-TYPE
+ SYNTAX Xdsl2ChPtmStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates current state (existing failures) of the DSL
+ channel in case its Data Path is PTM (Packet Transfer Mode).
+ This is a bitmap of possible conditions.
+ In case the channel is not of PTM Data Path, the object is set
+ to '0'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.1.5
+
+ (PTM Data Path failures)"
+ DEFVAL { { noDefect } }
+ ::= { xdsl2ChannelStatusEntry 14 }
+
+------------------------------------------------
+-- Scalars that relate to the SC Status Tables
+------------------------------------------------
+
+xdsl2ScalarSCMaxInterfaces OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value determines the maximum number of
+ interfaces supported by xdsl2SCStatusTable,
+ xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
+ ::= { xdsl2ScalarSC 1 }
+
+xdsl2ScalarSCAvailInterfaces OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value determines the currently available number of
+ interfaces listed in xdsl2SCStatusTable,
+ xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
+ ::= { xdsl2ScalarSC 2 }
+
+------------------------------------------------
+-- xdsl2SCStatusTable --
+------------------------------------------------
+
+xdsl2SCStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2SCStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2SCStatusTable contains
+ status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that
+ provide information about the size of parameters in
+ xdsl2SCStatusSegmentTable.
+ The parameters in this table MUST be updated after a loop
+ diagnostic procedure, MAY be updated after a line
+ initialization, and MAY be updated at Showtime."
+ ::= { xdsl2Status 3 }
+
+xdsl2SCStatusEntry OBJECT-TYPE
+ SYNTAX Xdsl2SCStatusEntry
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index of this
+ table is the transmission direction."
+ INDEX { ifIndex, xdsl2SCStatusDirection }
+ ::= { xdsl2SCStatusTable 1 }
+
+Xdsl2SCStatusEntry ::=
+ SEQUENCE {
+ xdsl2SCStatusDirection Xdsl2Direction,
+ xdsl2SCStatusLinScale Unsigned32,
+ xdsl2SCStatusLinScGroupSize Unsigned32,
+ xdsl2SCStatusLogMt Unsigned32,
+ xdsl2SCStatusLogScGroupSize Unsigned32,
+ xdsl2SCStatusQlnMt Unsigned32,
+ xdsl2SCStatusQlnScGroupSize Unsigned32,
+ xdsl2SCStatusSnrMtime Unsigned32,
+ xdsl2SCStatusSnrScGroupSize Unsigned32,
+ xdsl2SCStatusAttainableRate Unsigned32,
+ xdsl2SCStatusRowStatus RowStatus
+ }
+
+xdsl2SCStatusDirection OBJECT-TYPE
+ SYNTAX Xdsl2Direction
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The direction of the subcarrier either
+ upstream or downstream."
+ ::= { xdsl2SCStatusEntry 1 }
+
+xdsl2SCStatusLinScale OBJECT-TYPE
+ SYNTAX Unsigned32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The scale factor to be applied to the H(f) linear
+ representation values for the respective transmission direction.
+ This parameter is only available after a loop diagnostic
+ procedure. It is represented as an unsigned integer in the range
+ from 1 to 2^16-1."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.1 (HLINSCds)
+ and paragraph #7.5.1.26.7 (HLINSCus)"
+ ::= { xdsl2SCStatusEntry 2 }
+
+xdsl2SCStatusLinScGroupSize OBJECT-TYPE
+
+ SYNTAX Unsigned32(1 | 2 | 4 | 8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of subcarriers per group used to report the H(f)
+ linear representation values for the respective transmission
+ direction. The valid values are 1, 2, 4, and 8. For ADSL, this
+ parameter is equal to one and, for VDSL2, it is equal to the size
+ of a subcarrier group used to compute these parameters.
+ This parameter is only available after a loop diagnostic
+ procedure."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds)
+ and paragraph #7.5.1.26.8 (HLINGus)"
+ ::= { xdsl2SCStatusEntry 3 }
+
+xdsl2SCStatusLogMt OBJECT-TYPE
+ SYNTAX Unsigned32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter contains the number of symbols used to
+ measure the Hlog(f) values. It is represented as an unsigned
+ integer in the range from 1 to 2^16-1.
+ After a loop diagnostic procedure, this parameter shall contain
+ the number of symbols used to measure the Hlog(f). It should
+ correspond to the value specified in the Recommendation (e.g., the
+ number of symbols in 1 s time interval for ITU-T Recommendation.
+ G.992.3)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds)
+ and paragraph #7.5.1.26.10 (HLOGMTus)"
+ ::= { xdsl2SCStatusEntry 4 }
+
+xdsl2SCStatusLogScGroupSize OBJECT-TYPE
+ SYNTAX Unsigned32(1 | 2 | 4 | 8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of subcarriers per group used to report the H(f)
+ logarithmic representation values for the respective
+ transmission direction. The valid values are 1, 2, 4, and 8.
+ For ADSL, this parameter is equal to 1, and for VDSL2, it is
+ equal to the size of a subcarrier group used to compute these
+ parameters."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds)
+ and paragraph #7.5.1.26.11 (HLOGGus)"
+ ::= { xdsl2SCStatusEntry 5 }
+
+xdsl2SCStatusQlnMt OBJECT-TYPE
+
+ SYNTAX Unsigned32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter contains the number of symbols used to
+ measure the QLN(f) values. It is an unsigned integer in the range
+ from 1 to 2^16-1. After a loop diagnostic procedure, this
+ parameter shall contain the number of symbols used to measure the
+ QLN(f). It should correspond to the value specified in the
+ Recommendation (e.g., the number of symbols in 1 s time interval
+ for ITU-T Recommendation G.992.3)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.1 (QLNMTds)
+ and paragraph #7.5.1.27.4 (QLNMTus)"
+ ::= { xdsl2SCStatusEntry 6 }
+
+xdsl2SCStatusQlnScGroupSize OBJECT-TYPE
+ SYNTAX Unsigned32(1 | 2 | 4 | 8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of subcarriers per group used to report the Quiet
+ Line Noise values for the respective transmission direction.
+ The valid values are 1, 2, 4, and 8.
+ For ADSL, this parameter is equal to 1, and for VDSL2, it is
+ equal to the size of a subcarrier group used to compute these
+ parameters."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds)
+ and paragraph #7.5.1.27.5 (QLNGus)"
+ ::= { xdsl2SCStatusEntry 7 }
+
+xdsl2SCStatusSnrMtime OBJECT-TYPE
+ SYNTAX Unsigned32 (1..65535)
+ UNITS "symbols"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter contains the number of symbols used to measure
+ the SNR(f) values. It is an unsigned integer in the range from 1
+ to 2^16-1. After a loop diagnostic procedure, this parameter
+ shall contain the number of symbols used to measure the SNR(f).
+ It should correspond to the value specified in the Recommendation
+ (e.g., the number of symbols in 1 s time interval for ITU-T
+ Recommendation G.992.3)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.1 (SNRMTds)
+ and paragraph #7.5.1.28.4 (SNRMTus)"
+ ::= { xdsl2SCStatusEntry 8 }
+
+xdsl2SCStatusSnrScGroupSize OBJECT-TYPE
+
+ SYNTAX Unsigned32(1 | 2 | 4 | 8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of subcarriers per group used to report the SNR values
+ on the respective transmission direction.
+ The valid values are 1, 2, 4, and 8.
+ For ADSL, this parameter is equal to 1, and for VDSL2, it is
+ equal to the size of a subcarrier group used to compute these
+ parameters."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.2 (SNRGds)
+ and paragraph #7.5.1.28.5 (SNRGus)"
+ ::= { xdsl2SCStatusEntry 9 }
+
+xdsl2SCStatusAttainableRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Attainable Data Rate. The maximum net data rate
+ currently attainable by the xTU-C transmitter and xTU-R receiver
+ (when referring to downstream direction) or by the xTU-R
+ transmitter and xTU-C receiver (when referring to upstream
+ direction). Value is coded in bits/s.
+ This object reflects the value of the parameter following the
+ most recent DELT performed on the associated line. Once the DELT
+ process is over, the parameter no longer changes until the row is
+ deleted or a new DELT process is initiated."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)
+ and paragraph #7.5.1.20 (ATTNDRus)"
+ ::= { xdsl2SCStatusEntry 10 }
+
+xdsl2SCStatusRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Row Status. The SNMP agent will create a row in this table
+ for storing the results of a DELT performed on the associated
+ line, if the row does not already exist.
+
+ When a row is created in this table, the SNMP agent should also
+ create corresponding rows in the tables xdsl2SCStatusBandTable and
+ xdsl2SCStatusSegmentTable.
+
+ The SNMP manager is not permitted to create rows in this table or
+ set the row status to 'notInService'. In the first case,
+
+ if the SNMP manager tries to create a new row, the SNMP agent
+ responds with the value 'noCreation' in the error status
+ field of the response-PDU. In the latter case the SNMP agent
+ responds with the value 'wrongValue' in the error status
+ field of the response-PDU.
+
+ When a row is deleted in this table, the SNMP agent should also
+ delete corresponding rows in the tables xdsl2SCStatusBandTable and
+ xdsl2SCStatusSegmentTable.
+
+ The SNMP agent may have limited resources; therefore, if multiple
+ rows coexist in this table, it may fail to add new rows to this
+ table or allocate memory resources for a new DELT process. If
+ that occurs, the SNMP agent responds with either the value
+ 'tableFull' or the value 'noResources' (for
+ the xdsl2LineCmndConfLdsfFailReason object in xdsl2LineTable).
+
+ The management system (the operator) may delete rows from this
+ table according to any scheme. For example, after retrieving the
+ results."
+ ::= { xdsl2SCStatusEntry 11 }
+
+------------------------------------------------
+-- xdsl2SCStatusBandTable --
+------------------------------------------------
+
+xdsl2SCStatusBandTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2SCStatusBandEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2SCStatusBandTable contains subcarrier status
+ parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-
+ band.
+ For ADSL/ADSL2/ADSL2+, there is a single upstream band and a
+ single downstream band. For VDSL2, there are several downstream
+ bands and several upstream bands.
+ The parameters in this table are only available after a loop
+ diagnostic procedure."
+ ::= { xdsl2Status 4 }
+
+xdsl2SCStatusBandEntry OBJECT-TYPE
+ SYNTAX Xdsl2SCStatusBandEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface
+
+ has an ifType of vdsl2(251). A second index of this table is the
+ transmission band."
+ INDEX { ifIndex, xdsl2SCStatusBand }
+ ::= { xdsl2SCStatusBandTable 1 }
+
+Xdsl2SCStatusBandEntry ::=
+ SEQUENCE {
+ xdsl2SCStatusBand Xdsl2Band,
+ xdsl2SCStatusBandLnAtten Unsigned32,
+ xdsl2SCStatusBandSigAtten Unsigned32
+ }
+
+xdsl2SCStatusBand OBJECT-TYPE
+ SYNTAX Xdsl2Band
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The transmission band."
+ ::= { xdsl2SCStatusBandEntry 1 }
+
+xdsl2SCStatusBandLnAtten OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When referring to a band in the downstream direction, it is
+ the measured difference in the total power transmitted by the
+ xTU-C and the total power received by the xTU-R over all
+ subcarriers during diagnostics mode.
+ When referring to a band in the upstream direction, it is the
+ measured difference in the total power transmitted by the xTU-R
+ and the total power received by the xTU-C over all subcarriers
+ during diagnostics mode.
+ It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
+ to 127 dB).
+ A special value of 0x7FFFFFFF (2147483647) indicates the line
+ attenuation is out of range to be represented.
+ A special value of 0x7FFFFFFE (2147483646) indicates the line
+ attenuation measurement is unavailable.
+ This object reflects the value of the parameter following the
+ most recent DELT performed on the associated line. Once the DELT
+ process is over, the parameter no longer changes until the row is
+ deleted or a new DELT process is initiated."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
+ and paragraph #7.5.1.10 (LATNus)"
+ DEFVAL { 2147483646 }
+ ::= { xdsl2SCStatusBandEntry 2 }
+
+xdsl2SCStatusBandSigAtten OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When referring to a band in the downstream direction, it is the
+ measured difference in the total power transmitted by the xTU-C
+ and the total power received by the xTU-R over all subcarriers
+ during Showtime after the diagnostics mode.
+ When referring to the upstream direction, it is the measured
+ difference in the total power transmitted by the xTU-R and the
+ total power received by the xTU-C over all subcarriers during
+ Showtime after the diagnostics mode.
+ It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
+ to 127 dB).
+ A special value of 0x7FFFFFFF (2147483647) indicates the line
+ attenuation is out of range to be represented.
+ A special value of 0x7FFFFFFE (2147483646) indicates the line
+ attenuation measurement is unavailable.
+ This object reflects the value of the parameter following the
+ most recent DELT performed on the associated line. Once the DELT
+ process is over, the parameter no longer changes until the row is
+ deleted or a new DELT process is initiated."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
+ and paragraph #7.5.1.12 (SATNus)"
+ DEFVAL { 2147483646 }
+ ::= { xdsl2SCStatusBandEntry 3 }
+
+------------------------------------------------
+-- xdsl2SCStatusSegmentTable --
+------------------------------------------------
+
+xdsl2SCStatusSegmentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2SCStatusSegmentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2SCStatusSegmentTable contains status
+ parameters of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+
+ Several objects in the table refer to NSus and NSds. For
+ G.993.2, the value of NSus and NSds are, respectively, the
+ indices of the highest supported upstream and downstream
+ subcarriers according to the selected implementation profile.
+ For ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
+
+ The parameters in this table MUST be updated after a loop
+
+ diagnostic procedure and MAY be updated after a line
+ initialization and MAY be updated at Showtime."
+ ::= { xdsl2Status 5 }
+
+xdsl2SCStatusSegmentEntry OBJECT-TYPE
+ SYNTAX Xdsl2SCStatusSegmentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index of this
+ table is the transmission direction. A third index identifies
+ the specific segment of the subcarriers status addressed."
+ INDEX { ifIndex,
+ xdsl2SCStatusDirection,
+ xdsl2SCStatusSegment }
+ ::= { xdsl2SCStatusSegmentTable 1 }
+
+Xdsl2SCStatusSegmentEntry ::=
+ SEQUENCE {
+ xdsl2SCStatusSegment Unsigned32,
+ xdsl2SCStatusSegmentLinReal OCTET STRING,
+ xdsl2SCStatusSegmentLinImg OCTET STRING,
+ xdsl2SCStatusSegmentLog OCTET STRING,
+ xdsl2SCStatusSegmentQln OCTET STRING,
+ xdsl2SCStatusSegmentSnr OCTET STRING,
+ xdsl2SCStatusSegmentBitsAlloc Xdsl2BitsAlloc,
+ xdsl2SCStatusSegmentGainAlloc OCTET STRING
+ }
+
+xdsl2SCStatusSegment OBJECT-TYPE
+ SYNTAX Unsigned32(1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The segment of the subcarriers status information provided by
+ this row.
+ Several status parameters in this table are retrieved in segments.
+ The first segment of the status information is retrieved with
+ xdsl2SCStatusSegment=1, the second segment is retrieved with
+ xdsl2SCStatusSegment=2, and so on. When any status parameter is
+ retrieved in n segments where n<8), then for that parameter,
+ GET operations for the remaining segment numbers (n+1 to 8) will
+ respond with a zero-length OCTET STRING."
+ ::= { xdsl2SCStatusSegmentEntry 1 }
+
+xdsl2SCStatusSegmentLinReal OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..1024))
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An array of up to 512 complex H(f) linear representation
+ values in linear scale for the respective transmission direction.
+ It is designed to support up to 512 (downstream) subcarrier
+ groups and can be retrieved in a single segment.
+ The number of utilized values in the downstream direction depends
+ on NSds; in the upstream direction, it depends on NSus. This
+ value is referred to here as NS.
+ Each array entry represents the real component (referred to here
+ as a(i)) of Hlin(f = i*Df) value for a particular subcarrier
+ group index i (0 <= i <= NS).
+ Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+ where scale is xdsl2SCStatusLinScale and a(i) and b(i)
+ (provided by the xdsl2SCStatusSegmentLinImg object) are in the
+ range (-2^15+1) to (+2^15-1).
+ A special value a(i)=b(i)= -2^15 indicates that no measurement
+ could be done for the subcarrier group because it is out of the
+ passband or that the attenuation is out of range to be
+ represented. This parameter is only available after a loop
+ diagnostic procedure.
+ Each value in this array is 16 bits wide and is stored in big
+ endian format."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
+ and paragraph #7.5.1.26.9 (HLINpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 2 }
+
+xdsl2SCStatusSegmentLinImg OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..1024))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An array of up to 512 complex H(f) linear representation
+ values in linear scale for the respective transmission direction.
+ It is designed to support up to 512 (downstream) subcarrier
+ groups and can be retrieved in a single segment.
+ The number of utilized values in the downstream direction depends
+ on NSds; in the upstream direction, it depends on NSus. This
+ value is referred to here as NS.
+ Each array entry represents the imaginary component (referred to
+ here as b(i)) of Hlin(f = i*Df) value for a particular
+ subcarrier group index i (0 <= i <= NS).
+ Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+ where scale is xdsl2SCStatusLinScale and a(i) (provided by the
+ xdsl2SCStatusSegmentLinReal object) and b(i) are in the range
+ (-2^15+1) to (+2^15-1).
+ A special value a(i)=b(i)= -2^15 indicates that no measurement
+
+ could be done for the subcarrier group because it is out of the
+ passband or that the attenuation is out of range to be
+ represented. This parameter is only available after a loop
+ diagnostic procedure.
+ Each value in this array is 16 bits wide and is stored in big
+ endian format."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
+ and paragraph #7.5.1.26.9 (HLINpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 3 }
+
+xdsl2SCStatusSegmentLog OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..1024))
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An array of up to 512 real H(f) logarithmic representation
+ values in dB for the respective transmission direction. It is
+ designed to support up to 512 (downstream) subcarrier groups
+ and can be retrieved in a single segment.
+ The number of utilized values in the downstream direction depends
+ on NSds; in the upstream direction, it depends on NSus. This
+ value is referred to here as NS.
+ Each array entry represents the real Hlog(f = i*Df) value for a
+ particular subcarrier group index i, (0 <= i <= NS).
+ The real Hlog(f) value is represented as (6-m(i)/10), with m(i)
+ in the range 0 to 1022. A special value m=1023 indicates that
+ no measurement could be done for the subcarrier group because
+ it is out of the passband or that the attenuation is out of
+ range to be represented. This parameter is applicable in loop
+ diagnostic procedure and initialization.
+ Each value in this array is 16 bits wide and is stored in big
+ endian format."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.6 (HLOGpsds)
+ and paragraph #7.5.1.26.12 (HLOGpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 4 }
+
+xdsl2SCStatusSegmentQln OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..512))
+ UNITS "dBm/Hz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An array of up to 512 real Quiet Line Noise values in dBm/Hz
+ for the respective transmission direction. It is designed for up
+ to 512 (downstream) subcarrier groups and can be retrieved in a
+ single segment.
+ The number of utilized values in the downstream direction depends
+
+ on NSds; in the upstream direction, it depends on NSus. This
+ value is referred to here as NS.
+ Each array entry represents the QLN(f = i*Df) value for a
+ particular subcarrier index i, (0 <= i <= NS).
+ The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range
+ 0 to 254. A special value n(i)=255 indicates that no measurement
+ could be done for the subcarrier group because it is out of the
+ passband or that the noise PSD is out of range to be represented.
+ This parameter is applicable in loop diagnostic procedure and
+ initialization. Each value in this array is 8 bits wide."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.3 (QLNpsds)
+ and paragraph #7.5.1.27.6 (QLNpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 5 }
+
+xdsl2SCStatusSegmentSnr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..512))
+ UNITS "0.5 dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNR Margin per subcarrier group, expressing the ratio
+ between the received signal power and received noise power per
+ subscriber group. It is an array of 512 octets, designed for
+ supporting up to 512 (downstream) subcarrier groups and can be
+ retrieved in a single segment.
+ The number of utilized octets in the downstream direction depends
+ on NSds; in the upstream direction, it depends on NSus. This
+ value is referred to here as NS.
+ Octet i (0 <= i <= NS) is set to a value in the range 0 to
+ 254 to indicate that the respective downstream or upstream
+ subcarrier group i has an SNR of:
+ (-32 + xdsl2SCStatusSegmentSnr(i)/2) in dB (i.e., -32 to 95 dB).
+ The special value 255 means that no measurement could be done for
+ the subcarrier group because it is out of the PSD mask passband or
+ that the noise PSD is out of range to be represented. Each value
+ in this array is 8 bits wide."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds)
+ and paragraph #7.5.1.28.6 (SNRpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 6 }
+
+xdsl2SCStatusSegmentBitsAlloc OBJECT-TYPE
+ SYNTAX Xdsl2BitsAlloc
+ UNITS "bits"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The bits allocation per subcarrier. An array of 256 octets
+ (512 nibbles) designed for supporting up to 512 (downstream)
+
+ subcarriers. When more than 512 subcarriers are supported, the
+ status information is reported through multiple (up to 8)
+ segments. The first segment is then used for the first 512
+ subcarriers. The second segment is used for the subcarriers
+ 512 to 1023 and so on.
+ The aggregate number of utilized nibbles in the downstream
+ direction (in all segments) depends on NSds; in the upstream
+ direction, it depends on NSus.
+ This value is referred to here as NS. The segment number is in
+ xdsl2SCStatusSegment.
+ Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+ segment is set to a value in the range 0 to 15 to indicate that
+ the respective downstream or upstream subcarrier j
+ (j=(segement-1)*512+i) has the same amount of bits
+ allocation."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
+ and paragraph #7.5.1.29.2 (BITSpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 7 }
+
+xdsl2SCStatusSegmentGainAlloc OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..1024))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The gain allocation per subcarrier. An array of 512 16-bit
+ values, designed for supporting up to 512 (downstream)
+ subcarriers. When more then 512 subcarriers are supported, the
+ status information is reported through multiple (up to 8)
+ segments. The first segment is then used for the first 512
+ subcarriers. The second segment is used for the subcarriers 512
+ to 1023 and so on.
+ The aggregate number of utilized octets in the downstream
+ direction depends on NSds; in the upstream direction, it depends
+ on NSus. This value is referred to here as NS. The segment
+ number is in xdsl2SCStatusSegment.
+ Value i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+ segment is set to a value in the range 0 to 4093 to indicate that
+ the respective downstream or upstream subcarrier j
+ (j=(segement-1)*512+i) has the same amount of gain value.
+ The gain value is represented as a multiple of 1/512 on a linear
+ scale. Each value in this array is 16 bits wide and is stored in
+ big endian format."
+ REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds)
+ and paragraph #7.5.1.29.4 (GAINSpsus)"
+ ::= { xdsl2SCStatusSegmentEntry 8 }
+
+------------------------------------------------
+-- xdsl2LineInventoryTable --
+
+------------------------------------------------
+
+xdsl2LineInventoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineInventoryTable contains an inventory of the
+ DSL termination unit."
+ ::= { xdsl2Inventory 1 }
+
+xdsl2LineInventoryEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineInventoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface
+ has an ifType of vdsl2(251). A second index of this table is the
+ termination unit."
+ INDEX { ifIndex, xdsl2LInvUnit }
+ ::= { xdsl2LineInventoryTable 1 }
+
+Xdsl2LineInventoryEntry ::=
+ SEQUENCE {
+ xdsl2LInvUnit Xdsl2Unit,
+ xdsl2LInvG994VendorId OCTET STRING,
+ xdsl2LInvSystemVendorId OCTET STRING,
+ xdsl2LInvVersionNumber OCTET STRING,
+ xdsl2LInvSerialNumber OCTET STRING,
+ xdsl2LInvSelfTestResult Unsigned32,
+ xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType
+ }
+
+xdsl2LInvUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2LineInventoryEntry 1 }
+
+xdsl2LInvG994VendorId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ADSL Transceiver Unit (ATU) G.994.1 Vendor ID as
+
+ inserted in the G.994.1 CL/CLR message.
+ It consists of 8 binary octets, including a country
+ code followed by a (regionally allocated) provider code, as
+ defined in Recommendation T.35."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.1-7.4.2"
+ ::= { xdsl2LineInventoryEntry 2 }
+
+xdsl2LInvSystemVendorId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ATU System Vendor ID (identifies the xTU system
+ integrator) as inserted in the Overhead Messages (both xTUs for
+ G.992.3, G.992.4, G.992.5, and G.993.2) or in the Embedded
+ Operations Channel (xTU-R in G.992.1 and G.992.2).
+ It consists of 8 binary octets, with same format as used for
+ Xdsl2InvG994VendorId."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.3-7.4.4"
+ ::= { xdsl2LineInventoryEntry 3 }
+
+xdsl2LInvVersionNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The xTU version number (vendor-specific information) as
+ inserted in the Overhead Messages (both xTUs for G.992.3,
+ G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
+ Channel (xTU-R in G.992.1 and G.992.2). It consists of up to 16
+ binary octets."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.5-7.4.6"
+ ::= { xdsl2LineInventoryEntry 4 }
+
+xdsl2LInvSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The xTU serial number (vendor-specific information) as
+ inserted in the Overhead Messages (both xTUs for G.992.3,
+ G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
+ Channel (xTU-R in G.992.1 and G.992.2). It is vendor-specific
+ information consisting of up to 32 ASCII characters."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.7-7.4.8"
+ ::= { xdsl2LineInventoryEntry 5 }
+
+xdsl2LInvSelfTestResult OBJECT-TYPE
+
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The xTU self-test result, coded as a 32-bit value. The
+ most significant octet of the result is '0' if the
+ self-test passed, and '1' if the self-test failed. The
+ interpretation of the other octets is vendor discretionary."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.9-7.4.10"
+ DEFVAL { 0 }
+ ::= { xdsl2LineInventoryEntry 6 }
+
+xdsl2LInvTransmissionCapabilities OBJECT-TYPE
+ SYNTAX Xdsl2TransmissionModeType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The xTU transmission system capability list of the different
+ coding types. It is coded in a bitmap representation with 1 or
+ more bits set. A bit set to '1' means that the xTU
+ supports the respective coding. The value may be derived from
+ the handshaking procedures defined in G.994.1. A set of xDSL
+ line transmission modes, with one bit per mode."
+ REFERENCE "ITU-T G.997.1, paragraph #7.4.11-7.4.12"
+ ::= { xdsl2LineInventoryEntry 7 }
+
+------------------------------------------------
+-- xdsl2LineConfTemplateTable --
+------------------------------------------------
+
+xdsl2LineConfTemplateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineConfTemplateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfTemplateTable contains VDSL2/ADSL/
+ ADSL2 and ADSL2+ line configuration templates.
+
+ Note that this table is also used to configure the number of
+ bearer channels.
+ When the number of bearer channels is increased, the SNMP agent
+ SHOULD create rows in all tables indexed by a channel index.
+ When the number of bearer channels is decreased, the SNMP agent
+ SHOULD delete rows in all tables indexed by a channel index.
+ For example, if the value of xdsl2LConfTempChan4ConfProfile is
+ set to a non-null value, then rows SHOULD be created in
+ xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other tables
+ indexed by a channel index.
+
+ For example, if the value of xdsl2LConfTempChan2ConfProfile is
+ set to a null value, then rows SHOULD be deleted in
+ xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other
+ tables indexed by a channel index.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileLine 1 }
+
+xdsl2LineConfTemplateEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineConfTemplateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default template with an index of 'DEFVAL' will always
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2LConfTempTemplateName }
+ ::= { xdsl2LineConfTemplateTable 1 }
+
+Xdsl2LineConfTemplateEntry ::=
+ SEQUENCE {
+ xdsl2LConfTempTemplateName SnmpAdminString,
+ xdsl2LConfTempLineProfile SnmpAdminString,
+ xdsl2LConfTempChan1ConfProfile SnmpAdminString,
+ xdsl2LConfTempChan1RaRatioDs Unsigned32,
+ xdsl2LConfTempChan1RaRatioUs Unsigned32,
+ xdsl2LConfTempChan2ConfProfile SnmpAdminString,
+ xdsl2LConfTempChan2RaRatioDs Unsigned32,
+ xdsl2LConfTempChan2RaRatioUs Unsigned32,
+ xdsl2LConfTempChan3ConfProfile SnmpAdminString,
+ xdsl2LConfTempChan3RaRatioDs Unsigned32,
+ xdsl2LConfTempChan3RaRatioUs Unsigned32,
+ xdsl2LConfTempChan4ConfProfile SnmpAdminString,
+ xdsl2LConfTempChan4RaRatioDs Unsigned32,
+ xdsl2LConfTempChan4RaRatioUs Unsigned32,
+ xdsl2LConfTempRowStatus RowStatus
+ }
+
+xdsl2LConfTempTemplateName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table."
+ REFERENCE "DSL Forum TR-129, paragraph #5.4"
+ ::= { xdsl2LineConfTemplateEntry 1 }
+
+xdsl2LConfTempLineProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the
+ VDSL2/ADSL/ADSL2 and ADSL2+ line configuration Profile Table
+ (xdsl2LineConfProfTable) that applies for this DSL line."
+ REFERENCE "DSL Forum TR-129, paragraph #5.4"
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineConfTemplateEntry 2 }
+
+xdsl2LConfTempChan1ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL2/
+ ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+ (xdsl2ChConfProfileTable) that applies to DSL bearer channel #1.
+ The channel profile name specified here MUST match the name of an
+ existing row in the xdsl2ChConfProfileTable table."
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineConfTemplateEntry 3 }
+
+xdsl2LConfTempChan1RaRatioDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #1 when performing rate
+ adaptation on Downstream. The ratio refers to the available data
+ rate in excess of the Minimum Data Rate, summed over all bearer
+ channels.
+ Also, the 100 - xdsl2LConfTempChan1RaRatioDs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Downstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 100 }
+ ::= { xdsl2LineConfTemplateEntry 4 }
+
+xdsl2LConfTempChan1RaRatioUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #1 when performing
+ rate adaptation on Upstream. The ratio refers to the available
+ data rate in excess of the Minimum Data Rate, summed over all
+ bearer channels.
+ Also, the 100 - xdsl2LConfTempChan1RaRatioUs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Upstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 100 }
+ ::= { xdsl2LineConfTemplateEntry 5 }
+
+xdsl2LConfTempChan2ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL2/
+ ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+ (xdsl2ChConfProfileTable) that applies to DSL bearer channel #2.
+ If the channel is unused, then the object is set to a zero-length
+ string.
+ This object may be set to a zero-length string only if
+ xdsl2LConfTempChan3ConfProfile contains a zero-length
+ string."
+ DEFVAL { "" }
+ ::= { xdsl2LineConfTemplateEntry 6 }
+
+xdsl2LConfTempChan2RaRatioDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #2 when performing
+ rate adaptation on Downstream. The ratio refers to the available
+ data rate in excess of the Minimum Data Rate, summed over all
+ bearer channels.
+ Also, the 100 - xdsl2LConfTempChan2RaRatioDs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Downstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to
+
+ 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 7 }
+
+xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #2 when performing
+ rate adaptation on Upstream. The ratio refers to the available
+ data rate in excess of the Minimum Data Rate, summed over all
+ bearer channels.
+ Also, the 100 - xdsl2LConfTempChan2RaRatioUs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Upstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 8 }
+
+xdsl2LConfTempChan3ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL2/
+ ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+ (xdsl2ChConfProfileTable) that applies to DSL bearer channel #3.
+ If the channel is unused, then the object is set to a zero-length
+ string.
+ This object may be set to a zero-length string only if
+ xdsl2LConfTempChan4ConfProfile contains a zero-length string.
+ This object may be set to a non-zero-length string only if
+ xdsl2LConfTempChan2ConfProfile contains a non-zero-length
+ string."
+ DEFVAL { "" }
+ ::= { xdsl2LineConfTemplateEntry 9 }
+
+xdsl2LConfTempChan3RaRatioDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #3 when performing
+ rate adaptation on Downstream. The ratio refers to the available
+ data rate in excess of the Minimum Data Rate, summed over all
+ bearer channels.
+ Also, the 100 - xdsl2LConfTempChan3RaRatioDs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Downstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 10 }
+
+xdsl2LConfTempChan3RaRatioUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #3 when performing
+ rate adaptation on Upstream. The ratio refers to the available
+ data rate in excess of the Minimum Data Rate, summed over all
+ bearer channels.
+ Also, the 100 - xdsl2LConfTempChan3RaRatioUs is the ratio of
+ excess data rate to be assigned to all other bearer channels on
+ Upstream direction. The sum of rate adaptation ratios over all
+ bearers on the same direction shall be equal to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 11 }
+
+xdsl2LConfTempChan4ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the VDSL2/
+ ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+ (xdsl2ChConfProfileTable) that applies to DSL bearer channel #4.
+ If the channel is unused, then the object is set to a zero-length
+ string.
+ This object may be set to a non-zero-length string only if
+ xdsl2LConfTempChan3ConfProfile contains a non-zero-length
+
+ string."
+ DEFVAL { "" }
+ ::= { xdsl2LineConfTemplateEntry 12 }
+
+xdsl2LConfTempChan4RaRatioDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #4 when performing rate
+ adaptation on Downstream. The ratio refers to the available data
+ rate in excess of the Minimum Data Rate, summed over all bearer
+ channels.
+ Also, the 100 - xdsl2LConfTempChan4RaRatioDs is the ratio of
+ excess data rate to be assigned to all other bearer channels.
+ The sum of rate adaptation ratios over all bearers on the same
+ direction shall sum to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 13 }
+
+xdsl2LConfTempChan4RaRatioUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..100)
+ UNITS "percent"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rate Adaptation Ratio. The ratio (in percent) that should be
+ taken into account for the bearer channel #4 when performing rate
+ adaptation on Upstream. The ratio refers to the available data
+ rate in excess of the Minimum Data Rate, summed over all bearer
+ channels.
+ Also, the 100 - xdsl2LConfTempChan4RaRatioUs is the ratio of
+ excess data rate to be assigned to all other bearer channels.
+ The sum of rate adaptation ratios over all bearers on the same
+ direction shall sum to 100%."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
+ (Rate adaptation ratio)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfTemplateEntry 14 }
+
+xdsl2LConfTempRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+ A template is activated by setting this object to 'active'.
+ Before a profile can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all associated lines.
+ A row in this table is said to be unreferenced when there is no
+ instance of xdsl2LineConfTemplate or
+ xdsl2LineConfFallbackTemplate that refers to the row."
+ ::= { xdsl2LineConfTemplateEntry 15 }
+
+------------------------------------------
+-- xdsl2LineConfProfTable --
+------------------------------------------
+
+xdsl2LineConfProfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineConfProfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfProfTable contains VDSL2/ADSL/
+ ADSL2 and ADSL2+ line configuration profiles.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileLine 2 }
+
+xdsl2LineConfProfEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineConfProfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default profile with an index of 'DEFVAL' will always
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2LConfProfProfileName }
+ ::= { xdsl2LineConfProfTable 1 }
+
+Xdsl2LineConfProfEntry ::=
+ SEQUENCE {
+ xdsl2LConfProfProfileName SnmpAdminString,
+ xdsl2LConfProfScMaskDs Xdsl2ScMaskDs,
+ xdsl2LConfProfScMaskUs Xdsl2ScMaskUs,
+ xdsl2LConfProfVdsl2CarMask Xdsl2CarMask,
+ xdsl2LConfProfRfiBands Xdsl2RfiBands,
+ xdsl2LConfProfRaModeDs Xdsl2RaMode,
+ xdsl2LConfProfRaModeUs Xdsl2RaMode,
+
+ xdsl2LConfProfRaUsNrmDs Unsigned32,
+ xdsl2LConfProfRaUsNrmUs Unsigned32,
+ xdsl2LConfProfRaUsTimeDs Unsigned32,
+ xdsl2LConfProfRaUsTimeUs Unsigned32,
+ xdsl2LConfProfRaDsNrmDs Unsigned32,
+ xdsl2LConfProfRaDsNrmUs Unsigned32,
+ xdsl2LConfProfRaDsTimeDs Unsigned32,
+ xdsl2LConfProfRaDsTimeUs Unsigned32,
+ xdsl2LConfProfTargetSnrmDs Unsigned32,
+ xdsl2LConfProfTargetSnrmUs Unsigned32,
+ xdsl2LConfProfMaxSnrmDs Unsigned32,
+ xdsl2LConfProfMaxSnrmUs Unsigned32,
+ xdsl2LConfProfMinSnrmDs Unsigned32,
+ xdsl2LConfProfMinSnrmUs Unsigned32,
+ xdsl2LConfProfMsgMinUs Unsigned32,
+ xdsl2LConfProfMsgMinDs Unsigned32,
+ xdsl2LConfProfCeFlag Xdsl2LineCeFlag,
+ xdsl2LConfProfSnrModeDs Xdsl2LineSnrMode,
+ xdsl2LConfProfSnrModeUs Xdsl2LineSnrMode,
+ xdsl2LConfProfTxRefVnDs Xdsl2LineTxRefVnDs,
+ xdsl2LConfProfTxRefVnUs Xdsl2LineTxRefVnUs,
+ xdsl2LConfProfXtuTransSysEna Xdsl2TransmissionModeType,
+ xdsl2LConfProfPmMode Xdsl2LinePmMode,
+ xdsl2LConfProfL0Time Unsigned32,
+ xdsl2LConfProfL2Time Unsigned32,
+ xdsl2LConfProfL2Atpr Unsigned32,
+ xdsl2LConfProfL2Atprt Unsigned32,
+ xdsl2LConfProfProfiles Xdsl2LineProfiles,
+ xdsl2LConfProfDpboEPsd Xdsl2PsdMaskDs,
+ xdsl2LConfProfDpboEsEL Unsigned32,
+ xdsl2LConfProfDpboEsCableModelA Unsigned32,
+ xdsl2LConfProfDpboEsCableModelB Unsigned32,
+ xdsl2LConfProfDpboEsCableModelC Unsigned32,
+ xdsl2LConfProfDpboMus Unsigned32,
+ xdsl2LConfProfDpboFMin Unsigned32,
+ xdsl2LConfProfDpboFMax Unsigned32,
+ xdsl2LConfProfUpboKL Unsigned32,
+ xdsl2LConfProfUpboKLF Xdsl2UpboKLF,
+ xdsl2LConfProfUs0Mask Xdsl2LineUs0Mask,
+ xdsl2LConfProfForceInp TruthValue,
+ xdsl2LConfProfRowStatus RowStatus
+ }
+
+xdsl2LConfProfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+ "This object identifies a row in this table."
+ ::= { xdsl2LineConfProfEntry 1 }
+
+xdsl2LConfProfScMaskDs OBJECT-TYPE
+ SYNTAX Xdsl2ScMaskDs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Subcarrier mask. A bitmap of 4096 bits that allows masking
+ up to 4096 downstream subcarriers. If bit i (0 <= i <
+ NSCds) is set to '1', the respective downstream
+ subcarrier is masked, and if set to '0', the respective
+ subcarrier is unmasked.
+ Note that there should always be unmasked subcarriers (i.e.,
+ this object cannot be all 1's).
+ Also note that if NSCds < 4096, all bits i
+ (NSCds < i <= 4096) should be set to '1'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.6 (CARMASKds)"
+ ::= { xdsl2LineConfProfEntry 2 }
+
+xdsl2LConfProfScMaskUs OBJECT-TYPE
+ SYNTAX Xdsl2ScMaskUs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Subcarrier mask. A bitmap of 4096 bits that allows masking
+ up to 4096 upstream subcarriers. If bit i (0 <= i < NSCus)
+ is set to '1', the respective upstream subcarrier is
+ masked, and if set to '0', the respective subcarrier
+ is unmasked.
+ Note that there should always be unmasked subcarriers (i.e.,
+ this object cannot be all 1's).
+ Also note that if NSCus < 4096, all bits i
+ (NSCus < i <= 4096) should be set to '1'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.7 (CARMASKus)"
+ ::= { xdsl2LineConfProfEntry 3 }
+
+xdsl2LConfProfVdsl2CarMask OBJECT-TYPE
+ SYNTAX Xdsl2CarMask
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "VDSL2-specific subcarrier mask. This configuration
+ parameter defines the restrictions, additional to the band plan,
+ to determine the set of subcarriers allowed for transmission in
+ both the upstream and downstream directions.
+ The parameter shall describe the not masked subcarriers as one or
+ more frequency bands. Each band is represented by start and stop
+
+ subcarrier indices with a subcarrier spacing of 4.3125 kHz. The
+ valid range of subcarrier indices runs from 0 to at least the
+ index of the highest allowed subcarrier in both transmission
+ directions among all profiles enabled by the parameter
+ xdsl2LConfProfProfiles.
+ Up to 32 bands may be specified. Other subcarriers shall be
+ masked."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.8 (VDSL2-
+ CARMASK)"
+ ::= { xdsl2LineConfProfEntry 4 }
+
+xdsl2LConfProfRfiBands OBJECT-TYPE
+ SYNTAX Xdsl2RfiBands
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "For ITU-T Recommendation G.992.5, this configuration
+ parameter defines
+ the subset of downstream PSD mask breakpoints, as specified in
+ xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to notch
+ an RFI band. This subset consists of pairs of consecutive
+ subcarrier indices belonging to breakpoints: [ti; ti + 1],
+ corresponding to the low level of the notch.
+ The specific interpolation around these points is defined in the
+ relevant Recommendations (e.g., ITU-T Recommendation G.992.5).
+ The CO-MIB shall define the RFI notches using breakpoints in
+ xdsl2LConfProfPsdMaskDs (PSDMASKds) as specified in the relevant
+ Recommendations (e.g., ITU-T Recommendation G.992.5).
+
+ For ITU-T Recommendation G.993.2, this configuration parameter
+ defines the bands where the PSD shall be reduced as
+ specified in #7.2.1.2/G.993.2. Each band shall be represented
+ by a start and stop subcarrier indices with a subcarrier
+ spacing of 4.3125 kHz. Up to 16 bands may be specified.
+ This parameter defines the RFI bands for both the upstream
+ and downstream directions."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
+ ::= { xdsl2LineConfProfEntry 5 }
+
+xdsl2LConfProfRaModeDs OBJECT-TYPE
+ SYNTAX Xdsl2RaMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mode of operation of a rate-adaptive xTU-C in the
+ transmit direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.1 (RA-MODEds)"
+ DEFVAL { manual }
+
+ ::= { xdsl2LineConfProfEntry 6 }
+
+xdsl2LConfProfRaModeUs OBJECT-TYPE
+ SYNTAX Xdsl2RaMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mode of operation of a rate-adaptive xTU-R in the
+ transmit direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.2 (RA-MODEus)"
+ DEFVAL { manual }
+ ::= { xdsl2LineConfProfEntry 7 }
+
+xdsl2LConfProfRaUsNrmDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Downstream Up-Shift Noise Margin value, to be used when
+ xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the downstream
+ noise margin is above this value, and stays above it,
+ for more than the time specified by the
+ xdsl2LConfProfRaUsTimeDs, the xTU-R shall attempt to increase
+ the downstream net data rate. The Downstream Up-Shift Noise
+ Margin ranges from 0 to 310 units of 0.1 dB (physical values
+ are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.3 (RA-USNRMds)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 8 }
+
+xdsl2LConfProfRaUsNrmUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Upstream Up-Shift Noise Margin value, to be used when
+ xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream
+ noise margin is above this value, and stays above it,
+ for more than
+ the time specified by the xdsl2LConfProfRaUsTimeUs, the xTU-C
+ shall attempt to increase the upstream net data rate.
+ The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of
+ 0.1 dB (physical values are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.4 (RA-USNRMus)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 9 }
+
+xdsl2LConfProfRaUsTimeDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..16383)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Downstream Up-Shift Time Interval, to be used when
+ xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of
+ time that the downstream noise margin should stay above the
+ Downstream Up-Shift Noise Margin before the xTU-R shall attempt
+ to increase the downstream net data rate. The time interval
+ ranges from 0 to 16383 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.5 (RA-UTIMEds)"
+ DEFVAL { 3600 }
+ ::= { xdsl2LineConfProfEntry 10 }
+
+xdsl2LConfProfRaUsTimeUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..16383)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Upstream Up-Shift Time Interval, to be used when
+ xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of
+ time the upstream noise margin should stay above the Upstream
+ Up-Shift Noise Margin before the xTU-C shall attempt to increase
+ the upstream net data rate. The time interval ranges from 0 to
+ 16383 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.6 (RA-UTIMEus)"
+ DEFVAL { 3600 }
+ ::= { xdsl2LineConfProfEntry 11 }
+
+xdsl2LConfProfRaDsNrmDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Downstream Down-Shift Noise Margin value, to be used
+ when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the
+ downstream noise margin is below this value and stays
+ below that value, for more than the time specified by the
+ xdsl2LConfProfRaDsTimeDs, the xTU-R shall attempt to decrease
+ the downstream net data rate. The Downstream Down-Shift Noise
+ Margin ranges from 0 to 310 units of 0.1 dB (physical values
+ are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.7 (RA-DSNRMds)"
+ DEFVAL { 10 }
+
+ ::= { xdsl2LineConfProfEntry 12 }
+
+xdsl2LConfProfRaDsNrmUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Upstream Downshift Noise Margin value, to be used when
+ xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream
+ noise margin is below this value and stays below that value,
+ for more than the time specified by the xdsl2LConfProfRaDsTimeUs,
+ the xTU-C shall attempt to decrease the upstream net data rate.
+ The Upstream Down-Shift Noise Margin ranges from 0 to 310 units
+ of 0.1 dB (physical values are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.8 (RA-DSNRMus)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 13 }
+
+xdsl2LConfProfRaDsTimeDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..16383)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Downstream Downshift Time Interval, to be used when
+ xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of
+ time the downstream noise margin should stay below the Downstream
+ Down-Shift Noise Margin before the xTU-R shall attempt to
+ decrease the downstream net data rate. The time interval ranges
+ from 0 to 16383 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.9 (RA-DTIMEds)"
+ DEFVAL { 3600 }
+ ::= { xdsl2LineConfProfEntry 14 }
+
+xdsl2LConfProfRaDsTimeUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..16383)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Upstream Down-Shift Time Interval, to be used when
+ xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of
+ time the upstream noise margin should stay below the Upstream
+ Down-Shift Noise Margin before the xTU-C shall attempt to
+ decrease the upstream net data rate. The time interval ranges
+ from 0 to 16383 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.10 (RA-DTIMEus)"
+
+ DEFVAL { 3600 }
+ ::= { xdsl2LineConfProfEntry 15 }
+
+xdsl2LConfProfTargetSnrmDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum Noise Margin the xTU-R receiver shall achieve,
+ relative to the BER requirement for each of the downstream bearer
+ channels, to successfully complete initialization.
+ The target noise margin ranges from 0 to 310 units of 0.1 dB
+ (physical values are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.1 (TARSNRMds)"
+ DEFVAL { 60 }
+ ::= { xdsl2LineConfProfEntry 16 }
+
+xdsl2LConfProfTargetSnrmUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum Noise Margin the xTU-C receiver shall achieve,
+ relative to the BER requirement for each of the upstream bearer
+ channels, to successfully complete initialization.
+ The target noise margin ranges from 0 to 310 units of 0.1 dB
+ (physical values are 0 to 31 dB)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.2 (TARSNRMus)"
+ DEFVAL { 60 }
+ ::= { xdsl2LineConfProfEntry 17 }
+
+xdsl2LConfProfMaxSnrmDs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..310 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum Noise Margin the xTU-R receiver shall try to
+ sustain. If the Noise Margin is above this level, the xTU-R
+ shall request that the xTU-C reduce the xTU-C transmit power to
+ get a noise margin below this limit (if this functionality is
+ supported). The maximum noise margin ranges from 0 to 310 units
+ of 0.1 dB (physical values are 0 to 31 dB). A value of
+ 0x7FFFFFFF (2147483647) means that there is no maximum."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.3 (MAXSNRMds)"
+ DEFVAL { 310 }
+
+ ::= { xdsl2LineConfProfEntry 18 }
+
+xdsl2LConfProfMaxSnrmUs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..310 | 2147483647)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum Noise Margin the xTU-C receiver shall try to
+ sustain. If the Noise Margin is above this level, the xTU-C
+ shall request that the xTU-R reduce the xTU-R transmit power to
+ get a noise margin below this limit (if this functionality is
+ supported). The maximum noise margin ranges from 0 to 310 units
+ of 0.1 dB (physical values are 0 to 31 dB). A value of
+ 0x7FFFFFFF (2147483647) means that there is no maximum."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.4 (MAXSNRMus)"
+ DEFVAL { 310 }
+ ::= { xdsl2LineConfProfEntry 19 }
+
+xdsl2LConfProfMinSnrmDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum Noise Margin the xTU-R receiver shall tolerate.
+ If the noise margin falls below this level, the xTU-R shall
+ request that the xTU-C increase the xTU-C transmit power.
+ If an increase to xTU-C transmit power is not possible, a loss-
+ of-margin (LOM) defect occurs, the xTU-R shall fail and attempt
+ to reinitialize and the NMS shall be notified. The minimum noise
+ margin ranges from 0 to 310 units of 0.1 dB (physical values are
+ 0 to 31 dB). A value of 0 means that there is no minimum."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.5 (MINSNRMds)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 20 }
+
+xdsl2LConfProfMinSnrmUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..310)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum Noise Margin the xTU-C receiver shall tolerate.
+ If the noise margin falls below this level, the xTU-C shall
+ request that the xTU-R increase the xTU-R transmit power.
+ If an increase of xTU-R transmit power is not possible, a loss-
+ of-margin (LOM) defect occurs, the xTU-C shall fail and attempt
+
+ to re-initialize and the NMS shall be notified. The minimum
+ noise margin ranges from 0 to 310 units of 0.1 dB (physical
+ values are 0 to 31 dB). A value of 0 means that there is no
+ minimum."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6 (MINSNRMus)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 21 }
+
+xdsl2LConfProfMsgMinUs OBJECT-TYPE
+ SYNTAX Unsigned32(4000..248000)
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Overhead Rate Upstream. Defines the minimum rate of
+ the message-based overhead that shall be maintained by the xTU in
+ upstream direction. Expressed in bits per second and ranges from
+ 4000 to 248000 bits/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1 (MSGMINus)"
+ DEFVAL { 4000 }
+ ::= { xdsl2LineConfProfEntry 22 }
+
+xdsl2LConfProfMsgMinDs OBJECT-TYPE
+ SYNTAX Unsigned32(4000..248000)
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Overhead Rate Downstream. Defines the minimum rate
+ of the message-based overhead that shall be maintained by the xTU
+ in the downstream direction. Expressed in bits per second and
+ ranges from 4000 to 248000 bits/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2 (MSGMINds)"
+ DEFVAL { 4000 }
+ ::= { xdsl2LineConfProfEntry 23 }
+
+xdsl2LConfProfCeFlag OBJECT-TYPE
+ SYNTAX Xdsl2LineCeFlag
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter is a bit that enables the use of the optional
+ cyclic extension values."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.6.1 (CEFLAG)"
+ DEFVAL { { } }
+ ::= { xdsl2LineConfProfEntry 24 }
+
+xdsl2LConfProfSnrModeDs OBJECT-TYPE
+
+ SYNTAX Xdsl2LineSnrMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter enables the transmitter-referred virtual
+ noise in the downstream direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.1 (SNRMODEds)"
+ DEFVAL { virtualNoiseDisabled }
+ ::= { xdsl2LineConfProfEntry 25 }
+
+xdsl2LConfProfSnrModeUs OBJECT-TYPE
+ SYNTAX Xdsl2LineSnrMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter enables the transmitter-referred virtual
+ noise in the upstream direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.2 (SNRMODEus)"
+ DEFVAL { virtualNoiseDisabled }
+ ::= { xdsl2LineConfProfEntry 26 }
+
+xdsl2LConfProfTxRefVnDs OBJECT-TYPE
+ SYNTAX Xdsl2LineTxRefVnDs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the downstream
+ transmitter-referred virtual noise.
+ The TXREFVNds shall be specified through a set of breakpoints.
+ Each breakpoint shall consist of a subcarrier index t, with a
+ subcarrier spacing of 4.3125 kHz, and a noise PSD level
+ (expressed in dBm/Hz) at that subcarrier. The set of breakpoints
+ can then be represented as:
+ [(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)]."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.3 (TXREFVNds)"
+ ::= { xdsl2LineConfProfEntry 27 }
+
+xdsl2LConfProfTxRefVnUs OBJECT-TYPE
+ SYNTAX Xdsl2LineTxRefVnUs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the upstream
+ transmitter-referred virtual noise.
+ The TXREFVNus shall be specified through a set of breakpoints.
+ Each breakpoint shall consist of a subcarrier index t, with a
+ subcarrier spacing of 4.3125 kHz, and a noise PSD level
+ (expressed in dBm/Hz) at that subcarrier. The set of breakpoints
+
+ can then be represented as:
+ [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.4 (TXREFVNus)"
+ ::= { xdsl2LineConfProfEntry 28 }
+
+xdsl2LConfProfXtuTransSysEna OBJECT-TYPE
+ SYNTAX Xdsl2TransmissionModeType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "xTU Transmission System Enabling (XTSE). A list of the
+ different coding types enabled in this profile. It is coded in a
+ bitmap representation with 1 or more bits set. A bit set to
+ '1' means that the xTUs may apply the respective
+ coding for the DSL line. A bit set to '0' means that
+ the xTUs cannot apply the respective coding for the ADSL line.
+ All 'reserved' bits should be set to '0'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.1 (XTSE)"
+ ::= { xdsl2LineConfProfEntry 29 }
+
+xdsl2LConfProfPmMode OBJECT-TYPE
+ SYNTAX Xdsl2LinePmMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Power management state Enabling (PMMode). Defines the power
+ states the xTU-C or xTU-R may autonomously transition to on
+ this line.
+ This is a set of bits, where any bit with a '1' value
+ means that the xTU is allowed to transit into the respective
+ state and any bit with a '0' value means that the xTU
+ is not allowed to transit into the respective state."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.4 (PMMode)"
+ DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } }
+ ::= { xdsl2LineConfProfEntry 30 }
+
+xdsl2LConfProfL0Time OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum time (in seconds) between an Exit from the L2
+ state and the next Entry into the L2 state.
+ It ranges from 0 to 255 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.5 (L0-TIME)"
+ DEFVAL { 255 }
+ ::= { xdsl2LineConfProfEntry 31 }
+
+xdsl2LConfProfL2Time OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The minimum time (in seconds) between an Entry into the
+ L2 state and the first Power Trim in the L2 state and between two
+ consecutive Power Trims in the L2 state.
+ It ranges from 0 to 255 seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.6 (L2-TIME)"
+ DEFVAL { 255 }
+ ::= { xdsl2LineConfProfEntry 32 }
+
+xdsl2LConfProfL2Atpr OBJECT-TYPE
+ SYNTAX Unsigned32 (0..31)
+ UNITS "dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum aggregate transmit power reduction (in dB) that
+ can be performed at transition of L0 to L2 state or through a
+ single Power Trim in the L2 state.
+ It ranges from 0 dB to 31 dB."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.7 (L2-ATPR)"
+ DEFVAL { 10 }
+ ::= { xdsl2LineConfProfEntry 33 }
+
+xdsl2LConfProfL2Atprt OBJECT-TYPE
+ SYNTAX Unsigned32 (0..31)
+ UNITS "dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The total maximum aggregate transmit power reduction (in dB)
+ that can be performed in an L2 state. This is the sum of all
+ reductions of L2 Requests (i.e., at transition of L0 to L2 state)
+ and Power Trims."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.9 (L2-ATPRT)"
+ DEFVAL { 31 }
+ ::= { xdsl2LineConfProfEntry 34 }
+
+xdsl2LConfProfProfiles OBJECT-TYPE
+ SYNTAX Xdsl2LineProfiles
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The configuration parameter contains the G.993.2 profiles
+
+ to be allowed by the near-end xTU on this line.
+ It is coded in a bitmap representation (0 if not allowed, 1 if
+ allowed)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.11 (PROFILES)"
+ DEFVAL { { profile8a, profile8b, profile8c,
+ profile8d, profile12a, profile12b,
+ profile17a, profile30a } }
+ ::= { xdsl2LineConfProfEntry 35 }
+
+xdsl2LConfProfDpboEPsd OBJECT-TYPE
+ SYNTAX Xdsl2PsdMaskDs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the PSD mask that is
+ assumed to be permitted at the exchange. This parameter shall
+ use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).
+ The maximum number of breakpoints for xdsl2LConfProfDpboEPsd
+ is 16."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOEPSD)"
+ ::= { xdsl2LineConfProfEntry 36 }
+
+xdsl2LConfProfDpboEsEL OBJECT-TYPE
+ SYNTAX Unsigned32 (0..511)
+ UNITS "0.5 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the assumed electrical
+ length of cables (E-side cables) connecting exchange-based DSL
+ services to a remote flexibility point (cabinet), that hosts the
+ xTU-C that is subject to spectrally shaped downstream power back-
+ off (DPBO) depending on this length. The electrical length is
+ defined as the loss (in dB) of an equivalent length of
+ hypothetical cable at a reference frequency defined by the
+ network operator or in spectrum management regulations.
+ This parameter shall be coded as an unsigned integer representing
+ an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as
+ 511) in steps of 0.5 dB. All values in the range are valid. If
+ this parameter is set to '0', the DPBO shall be disabled."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESEL)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 37 }
+
+xdsl2LConfProfDpboEsCableModelA OBJECT-TYPE
+ SYNTAX Unsigned32 (0..640)
+ UNITS "2^-8"
+ MAX-ACCESS read-create
+
+ STATUS current
+ DESCRIPTION
+ "The E-side Cable Model parameter A (DPBOESCMA) of the cable
+ model (DPBOESCM) for cables connecting exchange-based DSL
+ services to a remote flexibility point (cabinet), that hosts the
+ xTU-C that is subject to spectrally shaped downstream power back-
+ off (DPBO) depending on this value.
+ The cable model is in terms of three scalars
+ xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+ xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+ xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+ estimate the frequency dependent loss of E-side cables calculated
+ from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
+ values shall be coded as unsigned integers representing a scalar
+ value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+ 2^-8. All values in the range are valid. This parameter is used
+ only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 38 }
+
+xdsl2LConfProfDpboEsCableModelB OBJECT-TYPE
+ SYNTAX Unsigned32 (0..640)
+ UNITS "2^-8"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The E-side Cable Model parameter B (DPBOESCMB) of the cable
+ model (DPBOESCM) for cables connecting exchange-based DSL
+ services to a remote flexibility point (cabinet), that hosts the
+ xTU-C that is subject to spectrally shaped downstream power back-
+ off (DPBO) depending on this value.
+ The cable model is in terms of three scalars
+ dsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+ xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+ xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+ estimate the frequency dependent loss of E-side cables calculated
+ from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
+ values shall be coded as unsigned integers representing a scalar
+ value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+ 2^-8. All values in the range are valid. This parameter is used
+ only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 39 }
+
+xdsl2LConfProfDpboEsCableModelC OBJECT-TYPE
+ SYNTAX Unsigned32 (0..640)
+
+ UNITS "2^-8"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The E-side Cable Model parameter C (DPBOESCMC) of the cable
+ model (DPBOESCM) for cables connecting exchange-based DSL
+ services to a remote flexibility point (cabinet), that hosts the
+ xTU-C that is subject to spectrally shaped downstream power back-
+ off (DPBO) depending on this value.
+ The cable model is in terms of three scalars
+ xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+ xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+ xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+ estimate the frequency dependent loss of E-side cables calculated
+ from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
+ values shall be coded as unsigned integers representing a scalar
+ value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+ 2^-8. All values in the range are valid. This parameter is used
+ only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 40 }
+
+xdsl2LConfProfDpboMus OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "0.5 dBm/Hz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the assumed Minimum
+ Usable receive PSD mask (in dBm/Hz) for exchange-based services,
+ used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX)
+ defined below (to determine the DPBO). It shall be coded as an
+ unsigned integer representing a PSD mask level from 0 dBm/Hz
+ (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5
+ dBm/Hz. All values in the range are valid.
+ NOTE - The PSD mask level is 3.5 dB above the signal PSD level.
+ This parameter is used only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 41 }
+
+xdsl2LConfProfDpboFMin OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2048)
+ UNITS "4.3125 kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+
+ "This configuration parameter defines the minimum frequency
+ from which the DPBO shall be applied. It ranges from 0 kHz
+ (coded as 0) to 8832 kHz (coded as 2048) in steps of
+ 4.3125 kHz. This parameter is used only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN)"
+ DEFVAL { 32 }
+ ::= { xdsl2LineConfProfEntry 42 }
+
+xdsl2LConfProfDpboFMax OBJECT-TYPE
+ SYNTAX Unsigned32 (32..6956)
+ UNITS "4.3125 kHz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the maximum frequency
+ at which DPBO may be applied. It ranges from 138 kHz (coded as
+ 32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
+ This parameter is used only for G.993.2."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX)"
+ DEFVAL { 512 }
+ ::= { xdsl2LineConfProfEntry 43 }
+
+xdsl2LConfProfUpboKL OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1280)
+ UNITS "0.1 dB"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the electrical length
+ expressed in dB at 1 MHz, kl0, configured by the CO-MIB.
+ The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in
+ steps of 0.1 dB. This parameter is relevant only if
+ xdsl2LConfProfUpboKLF is set to 'override(2)', which indicates
+ that this parameter's value will override the VTUs'
+ determination of the electrical length.
+ If xdsl2LConfProfUpboKLF is set either to auto(1) or
+ disableUpbo(3), then this parameter will be ignored."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKL)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfEntry 44 }
+
+xdsl2LConfProfUpboKLF OBJECT-TYPE
+ SYNTAX Xdsl2UpboKLF
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the upstream power backoff force mode."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKLF)
+
+ "
+ DEFVAL { disableUpbo }
+ ::= { xdsl2LineConfProfEntry 45 }
+
+xdsl2LConfProfUs0Mask OBJECT-TYPE
+ SYNTAX Xdsl2LineUs0Mask
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The configuration parameter contains the US0 PSD masks to be
+ allowed by the near-end xTU on the line. This parameter is only
+ defined for G.993.2 Annex A. It is represented as a bitmap (0
+ if not allowed and 1 if allowed)."
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.18
+ (US0MASK)"
+ DEFVAL { {} }
+ ::= { xdsl2LineConfProfEntry 46 }
+
+xdsl2LConfProfForceInp OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter, when set to 'true' indicates that the framer
+ settings of the bearer shall be selected such that the impulse
+ noise protection computed according to the formula specified in
+ the relevant Recommendation is greater than or equal to the
+ minimal impulse noise protection requirement.
+ This flag shall have the same value for all the bearers of one
+ line in the same direction."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.5 (FORCEINP)"
+ DEFVAL { false }
+ ::= { xdsl2LineConfProfEntry 47 }
+
+xdsl2LConfProfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ A profile is activated by setting this object to 'active'.
+
+ Before a profile can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all templates.
+
+ A row in this table is said to be unreferenced when there is no
+ instance of xdsl2LConfTempLineProfile that refers to the row.
+
+ When a row is created in this table, the SNMP agent should also
+ create corresponding rows in the tables
+ xdsl2LineConfProfModeSpecTable and
+ xdsl2LineConfProfModeSpecBandUsTable.
+ When a row is deleted in this table, the SNMP agent should also
+ delete corresponding rows in the tables
+ xdsl2LineConfProfModeSpecTable and
+ xdsl2LineConfProfModeSpecBandUsTable."
+ ::= { xdsl2LineConfProfEntry 48 }
+
+------------------------------------------
+-- xdsl2LineConfProfModeSpecTable --
+------------------------------------------
+
+xdsl2LineConfProfModeSpecTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfProfModeSpecTable extends the DSL
+ line configuration profile by xDSL Mode-Specific parameters.
+ A row in this table that has an index of xdsl2LConfProfXdslMode
+ == defMode(1), is called a 'mandatory' row or 'default' row.
+ A row in this table that has an index such that
+ xdsl2LConfProfXdslMode is not equal to defMode(1), is called an
+ 'optional' row or 'mode-specific' row.
+ When a row in the xdsl2LineConfProfTable table (the parent row)
+ is created, the SNMP agent will automatically create a
+ 'mandatory' row in this table.
+ When the parent row is deleted, the SNMP agent will automatically
+ delete all associated rows in this table.
+ Any attempt to delete the 'mandatory' row using the
+ xdsl2LConfProfModeSpecRowStatus object will be rejected by the
+ SNMP agent.
+ The manager MAY create an 'optional' row in this table using the
+ xdsl2LConfProfModeSpecRowStatus object if the parent row
+ exists.
+ The manager MAY delete an 'optional' row in this table using the
+ xdsl2LConfProfModeSpecRowStatus object at any time.
+ If the actual transmission mode of a DSL line does not match one
+ of the 'optional' rows in this table, then the line will use the
+ PSD configuration from the 'mandatory' row.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+
+ ::= { xdsl2ProfileLine 3 }
+
+xdsl2LineConfProfModeSpecEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineConfProfModeSpecEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfProfModeSpecTable extends the
+ DSL line configuration profile by DSL Mode-Specific
+ parameters."
+ INDEX { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode }
+ ::= { xdsl2LineConfProfModeSpecTable 1 }
+
+Xdsl2LineConfProfModeSpecEntry ::=
+ SEQUENCE {
+ xdsl2LConfProfXdslMode Xdsl2OperationModes,
+ xdsl2LConfProfMaxNomPsdDs Integer32,
+ xdsl2LConfProfMaxNomPsdUs Integer32,
+ xdsl2LConfProfMaxNomAtpDs Unsigned32,
+ xdsl2LConfProfMaxNomAtpUs Unsigned32,
+ xdsl2LConfProfMaxAggRxPwrUs Integer32,
+ xdsl2LConfProfPsdMaskDs Xdsl2PsdMaskDs,
+ xdsl2LConfProfPsdMaskUs Xdsl2PsdMaskUs,
+ xdsl2LConfProfPsdMaskSelectUs Xdsl2LinePsdMaskSelectUs,
+ xdsl2LConfProfClassMask Xdsl2LineClassMask,
+ xdsl2LConfProfLimitMask Xdsl2LineLimitMask,
+ xdsl2LConfProfUs0Disable Xdsl2LineUs0Disable,
+ xdsl2LConfProfModeSpecRowStatus RowStatus
+ }
+
+xdsl2LConfProfXdslMode OBJECT-TYPE
+ SYNTAX Xdsl2OperationModes
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The DSL Mode is a way of categorizing the various xDSL
+ transmission modes into groups, each group (xDSL Mode) shares
+ the same PSD configuration.
+ There should be multiple entries in this table for a given line
+ profile in case multiple bits are set in
+ xdsl2LConfProfXtuTransSysEna for that profile."
+ REFERENCE "DSL Forum TR-129, paragraph #5.5"
+ ::= { xdsl2LineConfProfModeSpecEntry 1 }
+
+xdsl2LConfProfMaxNomPsdDs OBJECT-TYPE
+ SYNTAX Integer32(-600..-300)
+ UNITS "0.1 dBm/Hz"
+ MAX-ACCESS read-create
+
+ STATUS current
+ DESCRIPTION
+ "The maximum nominal transmit PSD in the downstream direction
+ during initialization and Showtime. It ranges from -600 to -300
+ units of 0.1 dBm/Hz (physical values are -60 to -30
+ dBm/Hz)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.1 (MAXNOMPSDds)"
+ DEFVAL { -300 }
+ ::= { xdsl2LineConfProfModeSpecEntry 2 }
+
+xdsl2LConfProfMaxNomPsdUs OBJECT-TYPE
+ SYNTAX Integer32(-600..-300)
+ UNITS "0.1 dBm/Hz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum nominal transmit PSD in the upstream direction
+ during initialization and Showtime. It ranges from -600 to
+ -300 units of 0.1 dBm/Hz (physical values are -60 to -30
+ dBm/Hz)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.2 (MAXNOMPSDus)"
+ DEFVAL { -300 }
+ ::= { xdsl2LineConfProfModeSpecEntry 3 }
+
+xdsl2LConfProfMaxNomAtpDs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "0.1 dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum nominal aggregate to transmit power in the
+ downstream direction during initialization and Showtime. It
+ ranges from 0 to 255 units of 0.1 dBm (physical values are 0
+ to 25.5 dBm)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.3 (MAXNOMATPds)"
+ DEFVAL { 255 }
+ ::= { xdsl2LineConfProfModeSpecEntry 4 }
+
+xdsl2LConfProfMaxNomAtpUs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "0.1 dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum nominal aggregate transmit power in the upstream
+ direction during initialization and Showtime. It ranges from
+ 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
+ dBm)."
+
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.4 (MAXNOMATPus)"
+ DEFVAL { 255 }
+ ::= { xdsl2LineConfProfModeSpecEntry 5 }
+
+xdsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE
+ SYNTAX Integer32(-255..255 | 2147483647)
+ UNITS "0.1 dBm"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum upstream aggregate receive power over the
+ relevant set of subcarriers. The xTU-C should verify that the
+ upstream power cutback is such that this maximum aggregate
+ receive power value is honored. It ranges from -255 to 255
+ units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
+ A value of 0x7FFFFFFF (2147483647) means that there is no
+ limit."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.5 (MAXRXPWRus)"
+ DEFVAL { 255 }
+ ::= { xdsl2LineConfProfModeSpecEntry 6 }
+
+xdsl2LConfProfPsdMaskDs OBJECT-TYPE
+ SYNTAX Xdsl2PsdMaskDs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The downstream PSD mask applicable at the U-C2 reference
+ point.
+ This parameter is used only for G.992.5 and it may impose PSD
+ restrictions (breakpoints) in addition to the Limit PSD mask
+ defined in G.992.5.
+ This is a string of 32 pairs of values in the following
+ structure:
+ Octets 0-1 - Index of the first subcarrier used in the context of
+ a first breakpoint.
+ Octet 2 - The PSD reduction for the subcarrier indicated in
+ octets 0 and 1.
+ Octets 3-5 - Same, for a second breakpoint.
+ Octets 6-8 - Same, for a third breakpoint.
+ This architecture continues until octets 94-95, which are
+ associated with a 32nd breakpoint.
+ Each subcarrier index is an unsigned number in the range 0 and
+ NSCds-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
+ 255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
+ the range 0 to 190 (0 to -95 dBm/Hz).
+ When the number of breakpoints is less than 32, all remaining
+ octets are set to the value '0'. Note that the content of this
+ object should be correlated with the subcarrier mask and with
+
+ the RFI setup."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.9 (PSDMASKds)"
+ ::= { xdsl2LineConfProfModeSpecEntry 7 }
+
+xdsl2LConfProfPsdMaskUs OBJECT-TYPE
+ SYNTAX Xdsl2PsdMaskUs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The upstream PSD mask applicable at the U-R2 reference
+ point.
+ This parameter is used only for G.992.5, and it may impose PSD
+ restrictions (breakpoints) in addition to the Limit PSD mask
+ defined in G.992.5.
+ This is a string of 16 pairs of values in the following
+ structure:
+ Octets 0-1 - Index of the first subcarrier used in the context of
+ a first breakpoint.
+ Octet 2 - The PSD reduction for the subcarrier indicated in
+ octets 0 and 1.
+ Octets 3-5 - Same, for a second breakpoint.
+ Octets 6-8 - Same, for a third breakpoint.
+ This architecture continues until octets 9-47, which are
+ associated with a 16th breakpoint.
+ Each subcarrier index is an unsigned number in the range 0 and
+ NSCus-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
+ 255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
+ the range 0 to 190 (0 to -95 dBm/Hz).
+ When the number of breakpoints is less than 16, all remaining
+ octets are set to the value '0'. Note that the content of this
+ object should be correlated with the subcarrier mask and with
+ the RFI setup."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.12 (PSDMASKus)"
+ ::= { xdsl2LineConfProfModeSpecEntry 8 }
+
+xdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE
+ SYNTAX Xdsl2LinePsdMaskSelectUs
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The selected upstream PSD mask. This parameter is used only
+ for Annexes J and M of G.992.3 and G.992.5, and the same
+ selection is used for all relevant enabled bits in
+ xdsl2LConfProfXtuTransSysEna."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11
+ (Upstream PSD mask selection)"
+ DEFVAL { adlu32Eu32 }
+ ::= { xdsl2LineConfProfModeSpecEntry 9 }
+
+xdsl2LConfProfClassMask OBJECT-TYPE
+ SYNTAX Xdsl2LineClassMask
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "In order to reduce the number of configuration
+ possibilities, the limit Power Spectral Density masks (see
+ LIMITMASK) are grouped in PSD mask classes.
+ Each class is designed such that the PSD levels of each limit PSD
+ mask of a specific class are equal in their respective passband
+ above 552 kHz.
+ This parameter is defined per VDSL2 Annex enabled in the
+ xdsl2LConfProfXtuTransSysEna object. It selects a single PSD
+ mask class per Annex that is activated at the VTU-O."
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.15
+ (CLASSMASK)"
+ DEFVAL { a998ORb997M1cORc998B }
+ ::= { xdsl2LineConfProfModeSpecEntry 10 }
+
+xdsl2LConfProfLimitMask OBJECT-TYPE
+ SYNTAX Xdsl2LineLimitMask
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter contains the G.993.2 limit
+ PSD masks of the selected PSD mask class, enabled by the near-end
+ xTU on this line for each class of profiles.
+ This parameter is defined per VDSL2 Annex enabled in the
+ xdsl2LConfProfXtuTransSysEna object.
+ Through this parameter, several limit PSD masks of the selected
+ PSD mask class (xdsl2LConfProfClassMask) may be enabled. The
+ enabling parameter is coded in a bitmap representation (0 if the
+ associated mask is not allowed, 1 if it is allowed)."
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16
+ (LIMITMASK)"
+ DEFVAL { {} }
+ ::= { xdsl2LineConfProfModeSpecEntry 11 }
+
+xdsl2LConfProfUs0Disable OBJECT-TYPE
+ SYNTAX Xdsl2LineUs0Disable
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter indicates if the use of the US0 is
+ disabled for each limit PSD mask enabled in the
+ xdsl2LConfProfLimitMask parameter.
+ This parameter is defined per VDSL2 Annex enabled in the
+ xdsl2LConfProfXtuTransSysEna object.
+
+ For each limit PSD mask enabled in the xdsl2LConfProfLimitMask
+ parameter, a bit shall indicate if the US0 is disabled. The
+ disabling parameter is coded as a bitmap. The bit is set to '1'
+ if the US0 is disabled for the associated limit mask.
+ This parameter and the xdsl2LConfProfLimitMask parameter use the
+ same structure."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.17 (US0DISABLE)"
+ DEFVAL { {} }
+ ::= { xdsl2LineConfProfModeSpecEntry 12 }
+
+xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ This row is activated by setting this object to 'active'.
+
+ A 'mandatory' row, as defined in the DESCRIPTION clause of
+ xdsl2LineConfProfModeSpecTable, cannot be deleted at all.
+
+ A 'mandatory' row can be taken out of service
+ (by setting this object to 'notInService') if the parent
+ row in the xdsl2LineConfProfTable table is not in
+ the 'active' state.
+
+ An 'optional' row (or 'mode-specific' row) can be deleted or
+ taken out of service (by setting this object to 'destroy' or
+ 'notInService') at any time."
+
+ ::= { xdsl2LineConfProfModeSpecEntry 13 }
+
+----------------------------------------------
+-- xdsl2LineConfProfModeSpecBandUsTable --
+----------------------------------------------
+
+xdsl2LineConfProfModeSpecBandUsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecBandUsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfProfModeSpecBandUsTable extends
+ xdsl2LineConfProfModeSpecTable with upstream-band-specific
+ parameters for VDSL2, such as upstream power back-off
+ parameters xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB
+ (UPBOPSD-pb).
+
+ When a parent 'mandatory row' is created in
+ xdsl2LineConfProfModeSpecTable, the SNMP agent will automatically
+ create several 'mandatory' rows in this table -- one for each
+ upstream band:
+ Note: A mandatory row is one where xdsl2LConfProfXdslMode =
+ defMode(1). When the parent row is deleted, the SNMP agent will
+ automatically delete all associated rows in this table. Any
+ attempt to delete a 'mandatory' row using the
+ xdsl2LConfProfModeSpecBandUsRowStatus object will be rejected
+ by the SNMP agent. The manager MAY create a new 'optional'
+ row in this table using the xdsl2LConfProfModeSpecBandUsRowStatus
+ object if the associated parent row exists, and the
+ value of xdsl2LConfProfXdslMode is a G.993.2 value. The manager
+ MAY delete an 'optional' row in this table using the
+ xdsl2LConfProfModeSpecBandUsRowStatus object at any time.
+
+ With respect to the xdsl2LConfProfUpboPsdA and
+ xdsl2LConfProfUpboPsdB parameters, for a given upstream band,
+ if an optional row is missing from this table, then that
+ means upstream power back-off is disabled for that upstream
+ band.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileLine 4 }
+
+xdsl2LineConfProfModeSpecBandUsEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineConfProfModeSpecBandUsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineConfProfModeSpecBandUsTable extends
+ xdsl2LineConfProfModeSpecTable with upstream-band-specific
+ parameters for VDSL2, such as upstream power back-off parameters
+ xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB (UPBOPSD-
+ pb)."
+ INDEX { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode,
+ xdsl2LConfProfXdslBandUs}
+ ::= { xdsl2LineConfProfModeSpecBandUsTable 1 }
+
+Xdsl2LineConfProfModeSpecBandUsEntry ::=
+ SEQUENCE {
+ xdsl2LConfProfXdslBandUs Xdsl2BandUs,
+ xdsl2LConfProfUpboPsdA Integer32,
+ xdsl2LConfProfUpboPsdB Integer32,
+ xdsl2LConfProfModeSpecBandUsRowStatus RowStatus
+ }
+
+xdsl2LConfProfXdslBandUs OBJECT-TYPE
+ SYNTAX Xdsl2BandUs
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each value identifies a specific band in the upstream
+ transmission direction (excluding the US0 band)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
+ ::= { xdsl2LineConfProfModeSpecBandUsEntry 1 }
+
+xdsl2LConfProfUpboPsdA OBJECT-TYPE
+ SYNTAX Integer32(4000..8095)
+ UNITS "0.01 dBm/Hz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the 'a' reference
+ parameter of the UPBO reference PSD used to compute the
+ upstream power back-off for the upstream band. A UPBO PSD
+ defined for each band shall consist of two parameters [a, b].
+ Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
+ (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
+ dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
+ dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
+ 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'
+ expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
+ xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
+ a special configuration to disable UPBO in the respective
+ upstream band."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
+ DEFVAL { 4000 }
+ ::= { xdsl2LineConfProfModeSpecBandUsEntry 2 }
+
+xdsl2LConfProfUpboPsdB OBJECT-TYPE
+ SYNTAX Integer32(0..4095)
+ UNITS "0.01 dBm/Hz"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This configuration parameter defines the 'b' reference
+ parameter of the UPBO reference PSD used to compute the
+ upstream power back-off for the upstream band. A UPBO PSD
+ defined for each band shall consist of two parameters [a, b].
+ Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
+ (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
+ dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
+ dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
+ 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'
+
+ expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
+ xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
+ a special configuration to disable UPBO in the respective
+ upstream band."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
+ DEFVAL { 0 }
+ ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }
+
+xdsl2LConfProfModeSpecBandUsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ This row is activated by setting this object to 'active'.
+
+ A 'mandatory' row, as defined in the DESCRIPTION clause of
+ xdsl2LineConfProfModeSpecBandUsTable, cannot be deleted at all.
+
+ A 'mandatory' row can be taken out of service
+ (by setting this object to 'notInService') if the parent
+ row in the xdsl2LineConfProfModeSpecTable table is not in
+ the 'active' state.
+
+ An 'optional' row (or 'mode-specific' row) can be deleted or
+ taken out of service (by setting this object to 'destroy' or
+ 'notInService') at any time."
+ ::= { xdsl2LineConfProfModeSpecBandUsEntry 4 }
+
+------------------------------------------------
+-- xdsl2ChConfProfileTable --
+------------------------------------------------
+
+xdsl2ChConfProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2ChConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2ChConfProfileTable contains DSL channel
+ profile configuration.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileChannel 1 }
+
+xdsl2ChConfProfileEntry OBJECT-TYPE
+
+ SYNTAX Xdsl2ChConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default profile with an index of 'DEFVAL' will always
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2ChConfProfProfileName }
+ ::= { xdsl2ChConfProfileTable 1 }
+
+Xdsl2ChConfProfileEntry ::=
+ SEQUENCE {
+ xdsl2ChConfProfProfileName SnmpAdminString,
+ xdsl2ChConfProfMinDataRateDs Unsigned32,
+ xdsl2ChConfProfMinDataRateUs Unsigned32,
+ xdsl2ChConfProfMinResDataRateDs Unsigned32,
+ xdsl2ChConfProfMinResDataRateUs Unsigned32,
+ xdsl2ChConfProfMaxDataRateDs Unsigned32,
+ xdsl2ChConfProfMaxDataRateUs Unsigned32,
+ xdsl2ChConfProfMinDataRateLowPwrDs Unsigned32,
+ xdsl2ChConfProfMinDataRateLowPwrUs Unsigned32,
+ xdsl2ChConfProfMaxDelayDs Unsigned32,
+ xdsl2ChConfProfMaxDelayUs Unsigned32,
+ xdsl2ChConfProfMinProtectionDs Xdsl2SymbolProtection,
+ xdsl2ChConfProfMinProtectionUs Xdsl2SymbolProtection,
+ xdsl2ChConfProfMinProtection8Ds Xdsl2SymbolProtection8,
+ xdsl2ChConfProfMinProtection8Us Xdsl2SymbolProtection8,
+ xdsl2ChConfProfMaxBerDs Xdsl2MaxBer,
+ xdsl2ChConfProfMaxBerUs Xdsl2MaxBer,
+ xdsl2ChConfProfUsDataRateDs Unsigned32,
+ xdsl2ChConfProfDsDataRateDs Unsigned32,
+ xdsl2ChConfProfUsDataRateUs Unsigned32,
+ xdsl2ChConfProfDsDataRateUs Unsigned32,
+ xdsl2ChConfProfImaEnabled TruthValue,
+ xdsl2ChConfProfMaxDelayVar Unsigned32,
+ xdsl2ChConfProfInitPolicy Xdsl2ChInitPolicy,
+ xdsl2ChConfProfRowStatus RowStatus
+ }
+
+xdsl2ChConfProfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table."
+ ::= { xdsl2ChConfProfileEntry 1 }
+
+xdsl2ChConfProfMinDataRateDs OBJECT-TYPE
+
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Data Rate on Downstream direction. The minimum net
+ data rate for the bearer channel, coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.1
+ (Minimum data rate)"
+ ::= { xdsl2ChConfProfileEntry 2 }
+
+xdsl2ChConfProfMinDataRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Data Rate on Upstream direction. The minimum net
+ data rate for the bearer channel, coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.1
+ (Minimum data rate)"
+ ::= { xdsl2ChConfProfileEntry 3 }
+
+xdsl2ChConfProfMinResDataRateDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Reserved Data Rate on Downstream direction. The
+ minimum reserved net data rate for the bearer channel, coded
+ in bit/s. This parameter is used only if the Rate Adaptation
+ Mode in the direction of the bearer channel (i.e.,
+ xdsl2LConfProfRaModeDs) is set to 'dynamicRa'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.2
+ (Minimum reserved data rate)"
+ ::= { xdsl2ChConfProfileEntry 4 }
+
+xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum Reserved Data Rate on Upstream direction. The
+ minimum reserved net data rate for the bearer channel, coded in
+ bit/s. This parameter is used only if the Rate Adaptation Mode
+ in the direction of the bearer channel (i.e.,
+
+ xdsl2LConfProfRaModeUs) is set to 'dynamicRa'."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.2
+ (Minimum reserved data rate)"
+ ::= { xdsl2ChConfProfileEntry 5 }
+
+xdsl2ChConfProfMaxDataRateDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Data Rate on Downstream direction. The maximum net
+ data rate for the bearer channel, coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.3
+ (Maximum data rate)"
+ ::= { xdsl2ChConfProfileEntry 6 }
+
+xdsl2ChConfProfMaxDataRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Data Rate on Upstream direction. The maximum net
+ data rate for the bearer channel, coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.3
+ (Maximum data rate)"
+ ::= { xdsl2ChConfProfileEntry 7 }
+
+xdsl2ChConfProfMinDataRateLowPwrDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum net data rate for
+ the bearer channel as desired by the operator of the system
+ during the low power state (L1/L2). The power management low
+ power states L1 and L2 are defined in ITU-T Recommendations
+ G.992.2 and G.992.3, respectively.
+ The data rate is coded in steps of bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.5
+ (Minimum Data Rate in low power state)"
+ ::= { xdsl2ChConfProfileEntry 8 }
+
+xdsl2ChConfProfMinDataRateLowPwrUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum net data rate for
+ the bearer channel as desired by the operator of the system
+ during the low power state (L1/L2). The power management low
+ power states L1 and L2 are defined in ITU-T Recommendations
+ G.992.2 and G.992.3, respectively.
+ The data rate is coded in steps of bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.5
+ (Minimum Data Rate in low power state)"
+ ::= { xdsl2ChConfProfileEntry 9 }
+
+xdsl2ChConfProfMaxDelayDs OBJECT-TYPE
+ SYNTAX Unsigned32(0..63)
+ UNITS "milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Interleave Delay on Downstream direction. The
+ maximum one-way interleaving delay introduced by the PMS-TC on
+ Downstream direction. The xTUs shall choose the S (factor) and D
+ (depth) values such that the actual one-way interleaving delay
+ (Xdsl2ChStatusActDelay) is as close as possible to, but less than
+ or equal to, xdsl2ChConfProfMaxDelayDs. The delay is coded in
+ ms, with the value 0 indicating no delay bound is being
+ imposed."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2
+ (Maximum interleaving delay)"
+ ::= { xdsl2ChConfProfileEntry 10 }
+
+xdsl2ChConfProfMaxDelayUs OBJECT-TYPE
+ SYNTAX Unsigned32(0..63)
+ UNITS "milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Interleave Delay on Upstream direction. The maximum
+ one-way interleaving delay introduced by the PMS-TC on Upstream
+ direction. The xTUs shall choose the S (factor) and D (depth)
+ values such that the actual one-way interleaving delay
+ (Xdsl2ChStatusActDelay) is as close as possible to, but less than
+ or equal to, xdsl2ChConfProfMaxDelayUs. The delay is coded in
+ ms, with the value 0 indicating no delay bound is being
+ imposed."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2
+ (Maximum interleaving delay)"
+ ::= { xdsl2ChConfProfileEntry 11 }
+
+xdsl2ChConfProfMinProtectionDs OBJECT-TYPE
+ SYNTAX Xdsl2SymbolProtection
+ UNITS "symbols"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum impulse noise
+ protection for the bearer channel if it is transported over DMT
+ symbols with a subcarrier spacing of 4.3125 kHz. The impulse
+ noise protection is expressed in DMT symbols with a subcarrier
+ spacing of 4.3125 kHz and can take the values 1/2 and any integer
+ from 0 to 16, inclusive. If the xTU does not support the
+ configured INPMIN value, it shall use the nearest supported
+ impulse noise protection greater than INPMIN."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
+ DEFVAL { noProtection }
+ ::= { xdsl2ChConfProfileEntry 12 }
+
+xdsl2ChConfProfMinProtectionUs OBJECT-TYPE
+ SYNTAX Xdsl2SymbolProtection
+ UNITS "symbols"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum impulse noise
+ protection for the bearer channel if it is transported over DMT
+ symbols with a subcarrier spacing of 4.3125 kHz. The impulse
+ noise protection is expressed in DMT symbols with a subcarrier
+ spacing of 4.3125 kHz and can take the values 1/2 and any integer
+ from 0 to 16, inclusive. If the xTU does not support the
+ configured INPMIN value, it shall use the nearest supported
+ impulse noise protection greater than INPMIN."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINus)"
+ DEFVAL { noProtection }
+ ::= { xdsl2ChConfProfileEntry 13 }
+
+xdsl2ChConfProfMinProtection8Ds OBJECT-TYPE
+ SYNTAX Xdsl2SymbolProtection8
+ UNITS "symbols"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum impulse noise
+ protection for the bearer channel if it is transported over DMT
+ symbols with a subcarrier spacing of 8.625 kHz. The impulse
+ noise protection is expressed in DMT symbols with a subcarrier
+ spacing of 8.625 kHz."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8ds)"
+
+ DEFVAL { noProtection }
+ ::= { xdsl2ChConfProfileEntry 14 }
+
+xdsl2ChConfProfMinProtection8Us OBJECT-TYPE
+ SYNTAX Xdsl2SymbolProtection8
+ UNITS "symbols"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter specifies the minimum impulse noise
+ protection for the bearer channel if it is transported over DMT
+ symbols with a subcarrier spacing of 8.625 kHz. The impulse
+ noise protection is expressed in DMT symbols with a subcarrier
+ spacing of 8.625 kHz."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8us)"
+ DEFVAL { noProtection }
+ ::= { xdsl2ChConfProfileEntry 15 }
+
+xdsl2ChConfProfMaxBerDs OBJECT-TYPE
+ SYNTAX Xdsl2MaxBer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Bit Error Ratio on Downstream direction. The
+ maximum bit error ratio for the bearer channel."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6
+ (Maximum bit error ratio)"
+ DEFVAL { eminus5 }
+ ::= { xdsl2ChConfProfileEntry 16 }
+
+xdsl2ChConfProfMaxBerUs OBJECT-TYPE
+ SYNTAX Xdsl2MaxBer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum Bit Error Ratio on Upstream direction. The maximum
+ bit error ratio for the bearer channel."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6
+ (Maximum bit error ratio)"
+ DEFVAL { eminus5 }
+ ::= { xdsl2ChConfProfileEntry 17 }
+
+xdsl2ChConfProfUsDataRateDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+
+ "Data Rate Threshold Upshift for Downstream direction. An
+ 'Up-Shift rate change' event is triggered when the
+ actual downstream data rate exceeds, by more than the threshold,
+ the data rate at the last entry into Showtime. The parameter is
+ coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1
+ (Data rate threshold upshift)"
+ ::= { xdsl2ChConfProfileEntry 18 }
+
+xdsl2ChConfProfDsDataRateDs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Data Rate Threshold Downshift for Downstream direction. A
+ 'Down-Shift rate change' event is triggered when the
+ actual downstream data rate is below the data rate at the last
+ entry into Showtime, by more than the threshold. The parameter
+ is coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.2
+ (Data rate threshold downshift)"
+ ::= { xdsl2ChConfProfileEntry 19 }
+
+xdsl2ChConfProfUsDataRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Data Rate Threshold Upshift for Upstream direction. An
+ 'Up-Shift rate change' event is triggered when the
+ actual upstream data rate exceeds, by more than the threshold,
+ the data rate at the last entry into Showtime. The parameter is
+ coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1
+ (Data rate threshold upshift)"
+ ::= { xdsl2ChConfProfileEntry 20 }
+
+xdsl2ChConfProfDsDataRateUs OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bits/second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Data Rate Threshold Downshift for Upstream direction. A
+ 'Down-Shift rate change' event is triggered when the
+ actual upstream data rate is below the data rate at the last
+
+ entry into Showtime, by more than the threshold. The parameter
+ is coded in bit/s."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.2
+ (Data rate threshold downshift)"
+ ::= { xdsl2ChConfProfileEntry 21 }
+
+xdsl2ChConfProfImaEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IMA Mode Enable. The parameter enables the IMA operation
+ mode in the ATM Data Path. Relevant only if the channel is of
+ ATM Data Path. When in 'enable' state, the ATM Data
+ Path should comply with the requirements for IMA
+ transmission."
+ REFERENCE "ITU-T G.997.1, paragraph #7.3.4.1
+ (IMA operation mode enable parameter)"
+ DEFVAL { false }
+ ::= { xdsl2ChConfProfileEntry 22 }
+
+xdsl2ChConfProfMaxDelayVar OBJECT-TYPE
+ SYNTAX Unsigned32(1..255)
+ UNITS "0.1 milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum delay variation (DVMAX).
+ This optional VDSL2-specific parameter specifies the maximum
+ value for the delay variation allowed in an OLR procedure.
+ It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1
+ to 25.4 milliseconds) with the special value 255, which indicates
+ that no delay variation bound is imposed."
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9
+ (DVMAX)"
+ DEFVAL { 255 }
+ ::= { xdsl2ChConfProfileEntry 23 }
+
+xdsl2ChConfProfInitPolicy OBJECT-TYPE
+ SYNTAX Xdsl2ChInitPolicy
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Channel Initialization Policy Selection (CIPOLICY).
+ This optional parameter indicates which policy shall be applied
+ to determine the transceiver configuration parameters at
+ initialization. Those policies are defined in the respective
+ Recommendations."
+
+ REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10
+ (CIPOLICY)"
+ DEFVAL { policy0 }
+ ::= { xdsl2ChConfProfileEntry 24 }
+
+xdsl2ChConfProfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ A profile is activated by setting this object to 'active'.
+
+ Before a profile can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all associated templates.
+
+ A row in xdsl2ChConfProfTable is said to be unreferenced when
+ there is no instance of xdsl2LConfTempChan1ConfProfile,
+ xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan3ConfProfile,
+ or xdsl2LConfTempChan4ConfProfile that refers to
+ the row."
+ ::= { xdsl2ChConfProfileEntry 25 }
+
+------------------------------------------------
+-- xdsl2LineAlarmConfTemplateTable --
+------------------------------------------------
+
+xdsl2LineAlarmConfTemplateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineAlarmConfTemplateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineAlarConfTemplateTable contains DSL
+ line alarm configuration templates.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileAlarmConf 1 }
+
+xdsl2LineAlarmConfTemplateEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineAlarmConfTemplateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default template with an index of 'DEFVAL' will always
+
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2LAlarmConfTempTemplateName }
+ ::= { xdsl2LineAlarmConfTemplateTable 1 }
+
+Xdsl2LineAlarmConfTemplateEntry ::=
+ SEQUENCE {
+ xdsl2LAlarmConfTempTemplateName SnmpAdminString,
+ xdsl2LAlarmConfTempLineProfile SnmpAdminString,
+ xdsl2LAlarmConfTempChan1ConfProfile SnmpAdminString,
+ xdsl2LAlarmConfTempChan2ConfProfile SnmpAdminString,
+ xdsl2LAlarmConfTempChan3ConfProfile SnmpAdminString,
+ xdsl2LAlarmConfTempChan4ConfProfile SnmpAdminString,
+ xdsl2LAlarmConfTempRowStatus RowStatus
+ }
+
+xdsl2LAlarmConfTempTemplateName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table."
+ ::= { xdsl2LineAlarmConfTemplateEntry 1 }
+
+xdsl2LAlarmConfTempLineProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the DSL Line
+ Thresholds Configuration Profile Table
+ (xdsl2LineAlarmConfProfileTable) that applies to this line."
+ REFERENCE "DSL Forum TR-129, paragraph #8.2"
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineAlarmConfTemplateEntry 2 }
+
+xdsl2LAlarmConfTempChan1ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the DSL
+ Channel Thresholds Configuration Profile Table
+ (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+ channel #1. The channel profile name specified here MUST match
+ the name of an existing row in the xdsl2ChAlarmConfProfileTable
+ table."
+ REFERENCE "DSL Forum TR-129, paragraph #8.4"
+
+ DEFVAL { "DEFVAL" }
+ ::= { xdsl2LineAlarmConfTemplateEntry 3 }
+
+xdsl2LAlarmConfTempChan2ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the DSL
+ Channel Thresholds Configuration Profile Table
+ (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+ channel #2. The channel profile name specified here MUST match
+ the name of an existing row in the xdsl2ChAlarmConfProfileTable
+ table. If the channel is unused, then the object is set to a
+ zero-length string."
+ REFERENCE "DSL Forum TR-129, paragraph #8.4"
+ DEFVAL { "" }
+ ::= { xdsl2LineAlarmConfTemplateEntry 4 }
+
+xdsl2LAlarmConfTempChan3ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the DSL
+ Channel Thresholds Configuration Profile Table
+ (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+ channel #3. The channel profile name specified here MUST match
+ the name of an existing row in the xdsl2ChAlarmConfProfileTable
+ table.
+ This object may be set to a non-zero-length string only if
+ xdsl2LAlarmConfTempChan2ConfProfile contains a non-zero-length
+ string."
+ REFERENCE "DSL Forum TR-129, paragraph #8.4"
+ DEFVAL { "" }
+ ::= { xdsl2LineAlarmConfTemplateEntry 5 }
+
+xdsl2LAlarmConfTempChan4ConfProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the DSL
+ Channel Thresholds Configuration Profile Table
+ (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+ channel #4. The channel profile name specified here MUST match
+ the name of an existing row in the xdsl2ChAlarmConfProfileTable
+ table.
+
+ This object may be set to a non-zero-length string only if
+ xdsl2LAlarmConfTempChan3ConfProfile contains a non-zero-length
+ string."
+ REFERENCE "DSL Forum TR-129, paragraph #8.4"
+ DEFVAL { "" }
+ ::= { xdsl2LineAlarmConfTemplateEntry 6 }
+
+xdsl2LAlarmConfTempRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ A template is activated by setting this object to 'active'.
+
+ Before a template can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all associated lines.
+
+ A row in this table is said to be unreferenced when there is no
+ instance of xdsl2LineAlarmConfTemplate that refers to the
+ row."
+ ::= { xdsl2LineAlarmConfTemplateEntry 7 }
+
+------------------------------------------------
+-- xdsl2LineAlarmConfProfileTable --
+------------------------------------------------
+
+xdsl2LineAlarmConfProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2LineAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2LineAlarmConfProfileTable contains DSL
+ line performance threshold values.
+
+ If a performance counter exceeds the threshold value specified
+ in this table, then the SNMP agent will issue a threshold trap.
+ Each performance counter has a unique trap type
+ (see NOTIFICATION-TYPE definitions below).
+ One trap will be sent per interval, per interface, per trap type.
+ A value of 0 will disable the trap.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileAlarmConf 2 }
+
+xdsl2LineAlarmConfProfileEntry OBJECT-TYPE
+ SYNTAX Xdsl2LineAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default profile with an index of 'DEFVAL' will always
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2LineAlarmConfProfileName }
+ ::= { xdsl2LineAlarmConfProfileTable 1 }
+
+Xdsl2LineAlarmConfProfileEntry ::=
+ SEQUENCE {
+ xdsl2LineAlarmConfProfileName SnmpAdminString,
+ xdsl2LineAlarmConfProfileXtucThresh15MinFecs
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXtucThresh15MinEs
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXtucThresh15MinSes
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXtucThresh15MinLoss
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXtucThresh15MinUas
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXturThresh15MinFecs
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXturThresh15MinEs
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXturThresh15MinSes
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXturThresh15MinLoss
+ HCPerfIntervalThreshold,
+ xdsl2LineAlarmConfProfileXturThresh15MinUas
+ HCPerfIntervalThreshold,
+
+ xdsl2LineAlarmConfProfileThresh15MinFailedFullInt Unsigned32,
+ xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt Unsigned32,
+
+ xdsl2LineAlarmConfProfileRowStatus RowStatus
+ }
+
+xdsl2LineAlarmConfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table."
+ ::= { xdsl2LineAlarmConfProfileEntry 1 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinFecs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MFecs counter, when
+ xdsl2PMLCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 2 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinEs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MEs counter, when
+ xdsl2PMLCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 3 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinSes OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MSes counter, when
+ xdsl2PMLCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 4 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinLoss OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+
+ "A threshold for the xdsl2PMLCurr15MLoss counter, when
+ xdsl2PMLCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 5 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinUas OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MUas counter, when
+ xdsl2PMLCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 6 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinFecs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MFecs counter, when
+ xdsl2PMLCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 7 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinEs OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MEs counter, when
+ xdsl2PMLCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+
+ ::= { xdsl2LineAlarmConfProfileEntry 8 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinSes OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MSes counter, when
+ xdsl2PMLCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 9 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinLoss OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MLoss counter, when
+ xdsl2PMLCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 10 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinUas OBJECT-TYPE
+ SYNTAX HCPerfIntervalThreshold
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLCurr15MUas counter, when
+ xdsl2PMLCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 11 }
+
+xdsl2LineAlarmConfProfileThresh15MinFailedFullInt OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "A threshold for the xdsl2PMLInitCurr15MfailedFullInits
+ counter.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 12 }
+
+xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMLInitCurr15MFailedShortInits
+ counter.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2LineAlarmConfProfileEntry 13 }
+
+xdsl2LineAlarmConfProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ A profile is activated by setting this object to 'active'.
+
+ Before a profile can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all associated templates.
+
+ A row in this table is said to be unreferenced when there is no
+ instance of xdsl2LAlarmConfTempLineProfile that refers to the
+ row."
+ ::= { xdsl2LineAlarmConfProfileEntry 14 }
+
+------------------------------------------------
+-- xdsl2ChAlarmConfProfileTable --
+------------------------------------------------
+
+xdsl2ChAlarmConfProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2ChAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2ChAlarmConfProfileTable contains DSL channel
+ performance threshold values.
+
+ If a performance counter exceeds the threshold value specified
+ in this table, then the SNMP agent will issue a threshold trap.
+ Each performance counter has a unique trap type
+ (see NOTIFICATION-TYPE definitions below).
+ One trap will be sent per interval per interface per trap type.
+ A value of 0 will disable the trap.
+
+ Entries in this table MUST be maintained in a persistent
+ manner."
+ ::= { xdsl2ProfileAlarmConf 3 }
+
+xdsl2ChAlarmConfProfileEntry OBJECT-TYPE
+ SYNTAX Xdsl2ChAlarmConfProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A default profile with an index of 'DEFVAL' will always
+ exist, and its parameters will be set to vendor-specific values,
+ unless otherwise specified in this document."
+ INDEX { xdsl2ChAlarmConfProfileName }
+ ::= { xdsl2ChAlarmConfProfileTable 1 }
+
+Xdsl2ChAlarmConfProfileEntry ::=
+ SEQUENCE {
+ xdsl2ChAlarmConfProfileName
+ SnmpAdminString,
+ xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
+ Unsigned32,
+ xdsl2ChAlarmConfProfileXtucThresh15MinCorrected Unsigned32,
+ xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
+ Unsigned32,
+ xdsl2ChAlarmConfProfileXturThresh15MinCorrected Unsigned32,
+ xdsl2ChAlarmConfProfileRowStatus RowStatus
+ }
+
+xdsl2ChAlarmConfProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object identifies a row in this table."
+ ::= { xdsl2ChAlarmConfProfileEntry 1 }
+
+xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMChCurr15MCodingViolations
+ counter, when xdsl2PMChCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2ChAlarmConfProfileEntry 2 }
+
+xdsl2ChAlarmConfProfileXtucThresh15MinCorrected OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMChCurr15MCorrectedBlocks
+ counter, when xdsl2PMChCurrUnit is xtuc {1}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2ChAlarmConfProfileEntry 3 }
+
+xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMChCurr15MCodingViolations
+ counter, when xdsl2PMChCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2ChAlarmConfProfileEntry 4 }
+
+xdsl2ChAlarmConfProfileXturThresh15MinCorrected OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the xdsl2PMChCurr15MCorrectedBlocks
+ counter, when xdsl2PMChCurrUnit is xtur {2}.
+ The value 0 means that no threshold is specified for the
+ associated counter."
+
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
+ DEFVAL { 0 }
+ ::= { xdsl2ChAlarmConfProfileEntry 5 }
+
+xdsl2ChAlarmConfProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or to modify or
+ delete an existing row in this table.
+
+ A profile is activated by setting this object to 'active'.
+
+ Before a profile can be deleted or taken out of service (by
+ setting this object to 'destroy' or 'notInService'), it MUST be
+ first unreferenced from all associated templates.
+
+ A row in xdsl2ChConfProfTable is said to be unreferenced when
+ there is no instance of xdsl2LAlarmConfTempChan1ConfProfile,
+ xdsl2LAlarmConfTempChan2ConfProfile,
+ xdsl2LAlarmConfTempChan3ConfProfile, or
+ xdsl2LAlarmConfTempChan4ConfProfile that refers to
+ the row."
+ ::= { xdsl2ChAlarmConfProfileEntry 6 }
+
+------------------------------------------------
+-- PM line current counters --
+------------------------------------------------
+
+xdsl2PMLineCurrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineCurrTable contains current Performance
+ Monitoring results for DSL lines."
+ ::= { xdsl2PMLine 1 }
+
+xdsl2PMLineCurrEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index of this
+ table is the termination unit."
+ INDEX { ifIndex, xdsl2PMLCurrUnit }
+
+ ::= { xdsl2PMLineCurrTable 1 }
+
+Xdsl2PMLineCurrEntry ::=
+ SEQUENCE {
+ xdsl2PMLCurrUnit Xdsl2Unit,
+ xdsl2PMLCurr15MValidIntervals Unsigned32,
+ xdsl2PMLCurr15MInvalidIntervals Unsigned32,
+ xdsl2PMLCurr15MTimeElapsed HCPerfTimeElapsed,
+ xdsl2PMLCurr15MFecs Counter32,
+ xdsl2PMLCurr15MEs Counter32,
+ xdsl2PMLCurr15MSes Counter32,
+ xdsl2PMLCurr15MLoss Counter32,
+ xdsl2PMLCurr15MUas Counter32,
+ xdsl2PMLCurr1DayValidIntervals Unsigned32,
+ xdsl2PMLCurr1DayInvalidIntervals Unsigned32,
+ xdsl2PMLCurr1DayTimeElapsed HCPerfTimeElapsed,
+ xdsl2PMLCurr1DayFecs Counter32,
+ xdsl2PMLCurr1DayEs Counter32,
+ xdsl2PMLCurr1DaySes Counter32,
+ xdsl2PMLCurr1DayLoss Counter32,
+ xdsl2PMLCurr1DayUas Counter32
+ }
+
+xdsl2PMLCurrUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMLineCurrEntry 1 }
+
+xdsl2PMLCurr15MValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which data
+ was collected. The value will typically be equal to the maximum
+ number of 15-minute intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 15-minute intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+ maximum interval number for which data is available."
+ ::= { xdsl2PMLineCurrEntry 2 }
+
+xdsl2PMLCurr15MInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMLineCurrEntry 3 }
+
+xdsl2PMLCurr15MTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMLineCurrEntry 4 }
+
+xdsl2PMLCurr15MFecs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was at
+ least one FEC correction event for one or more bearer channels in
+ this line. This parameter is inhibited during UAS or SES."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+ and paragraph #7.2.1.2.1 (FECS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 5 }
+
+xdsl2PMLCurr15MEs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+ LOS >= 1 OR SEF >=1 OR LPR >= 1.
+ xTU-R: FEBE >= 1 for one or more bearer channels OR
+ LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+ and paragraph #7.2.1.2.2 (ES-LFE)"
+ ::= { xdsl2PMLineCurrEntry 6 }
+
+xdsl2PMLCurr15MSes OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: (CRC-8 anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS >= 1
+ OR SEF >= 1 OR LPR >= 1.
+ xTU-R: (FEBE anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS-FE >= 1
+ OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+ and paragraph #7.2.1.2.3 (SES-LFE)"
+ ::= { xdsl2PMLineCurrEntry 7 }
+
+xdsl2PMLCurr15MLoss OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was LOS (or
+ LOS-FE for xTU-R)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+ and paragraph #7.2.1.2.4 (LOSS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 8 }
+
+xdsl2PMLCurr15MUas OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in Unavailability State during this
+ interval. Unavailability begins at the onset of 10 contiguous
+ severely errored seconds, and ends at the onset of 10 contiguous
+ seconds with no severely errored seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+ and paragraph #7.2.1.2.5 (UAS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 9 }
+
+xdsl2PMLCurr1DayValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which data was
+ collected. The value will typically be equal to the maximum
+ number of 24-hour intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 24-hour intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+ maximum interval number for which data is available."
+ ::= { xdsl2PMLineCurrEntry 10 }
+
+xdsl2PMLCurr1DayInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMLineCurrEntry 11 }
+
+xdsl2PMLCurr1DayTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMLineCurrEntry 12 }
+
+xdsl2PMLCurr1DayFecs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was at
+ least one FEC correction event for one or more bearer channels in
+ this line. This parameter is inhibited during UAS or SES."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+ and paragraph #7.2.1.2.1 (FECS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 13 }
+
+xdsl2PMLCurr1DayEs OBJECT-TYPE
+ SYNTAX Counter32
+
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+ LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+ xTU-R: FEBE >= 1 for one or more bearer channels OR
+ LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+ and paragraph #7.2.1.2.2 (ES-LFE)"
+ ::= { xdsl2PMLineCurrEntry 14 }
+
+xdsl2PMLCurr1DaySes OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: (CRC-8 anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS >= 1
+ OR SEF >= 1 OR LPR >= 1.
+ xTU-R: (FEBE anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS-FE >= 1.
+ OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+ and paragraph #7.2.1.2.3 (SES-LFE)"
+ ::= { xdsl2PMLineCurrEntry 15 }
+
+xdsl2PMLCurr1DayLoss OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was LOS (or
+ LOS-FE for xTU-R)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+ and paragraph #7.2.1.2.4 (LOSS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 16 }
+
+xdsl2PMLCurr1DayUas OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in Unavailability State during this
+ interval.
+ Unavailability begins at the onset of 10 contiguous severely
+ errored seconds, and ends at the onset of 10 contiguous seconds
+ with no severely errored seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+ and paragraph #7.2.1.2.5 (UAS-LFE)"
+ ::= { xdsl2PMLineCurrEntry 17 }
+
+------------------------------------------------
+-- PM line init current counters --
+------------------------------------------------
+
+xdsl2PMLineInitCurrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineInitCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineInitCurrTable contains current
+ initialization counters for DSL lines."
+ ::= { xdsl2PMLine 2 }
+
+xdsl2PMLineInitCurrEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineInitCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of this table is an interface index where the
+ interface has an ifType of vdsl2(251)."
+ INDEX { ifIndex }
+ ::= { xdsl2PMLineInitCurrTable 1 }
+
+Xdsl2PMLineInitCurrEntry ::=
+ SEQUENCE {
+ xdsl2PMLInitCurr15MValidIntervals Unsigned32,
+ xdsl2PMLInitCurr15MInvalidIntervals Unsigned32,
+ xdsl2PMLInitCurr15MTimeElapsed Unsigned32,
+ xdsl2PMLInitCurr15MFullInits Unsigned32,
+ xdsl2PMLInitCurr15MFailedFullInits Unsigned32,
+ xdsl2PMLInitCurr15MShortInits Unsigned32,
+ xdsl2PMLInitCurr15MFailedShortInits Unsigned32,
+ xdsl2PMLInitCurr1DayValidIntervals Unsigned32,
+ xdsl2PMLInitCurr1DayInvalidIntervals Unsigned32,
+ xdsl2PMLInitCurr1DayTimeElapsed Unsigned32,
+ xdsl2PMLInitCurr1DayFullInits Unsigned32,
+ xdsl2PMLInitCurr1DayFailedFullInits Unsigned32,
+
+ xdsl2PMLInitCurr1DayShortInits Unsigned32,
+ xdsl2PMLInitCurr1DayFailedShortInits Unsigned32
+ }
+
+xdsl2PMLInitCurr15MValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which data
+ was collected. The value will typically be equal to the maximum
+ number of 15-minute intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 15-minute intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+ maximum interval number for which data is available."
+ ::= { xdsl2PMLineInitCurrEntry 1 }
+
+xdsl2PMLInitCurr15MInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMLineInitCurrEntry 2 }
+
+xdsl2PMLInitCurr15MTimeElapsed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMLineInitCurrEntry 3 }
+
+xdsl2PMLInitCurr15MFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of full initializations attempted on the line
+ (successful and failed) during this interval."
+
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
+ ::= { xdsl2PMLineInitCurrEntry 4 }
+
+xdsl2PMLInitCurr15MFailedFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed full initializations on the line during this
+ interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
+ ::= { xdsl2PMLineInitCurrEntry 5 }
+
+xdsl2PMLInitCurr15MShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of short initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
+ ::= { xdsl2PMLineInitCurrEntry 6 }
+
+xdsl2PMLInitCurr15MFailedShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed short initializations on the line during
+ this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
+ ::= { xdsl2PMLineInitCurrEntry 7 }
+
+xdsl2PMLInitCurr1DayValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which data was
+ collected. The value will typically be equal to the maximum
+ number of 24-hour intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 24-hour intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+ maximum interval number for which data is available."
+
+ ::= { xdsl2PMLineInitCurrEntry 8 }
+
+xdsl2PMLInitCurr1DayInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMLineInitCurrEntry 9 }
+
+xdsl2PMLInitCurr1DayTimeElapsed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMLineInitCurrEntry 10 }
+
+xdsl2PMLInitCurr1DayFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of full initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
+ ::= { xdsl2PMLineInitCurrEntry 11 }
+
+xdsl2PMLInitCurr1DayFailedFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed full initializations on the line during this
+ interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
+ ::= { xdsl2PMLineInitCurrEntry 12 }
+
+xdsl2PMLInitCurr1DayShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of short initializations attempted on the line
+
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
+ ::= { xdsl2PMLineInitCurrEntry 13 }
+
+xdsl2PMLInitCurr1DayFailedShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed short initializations on the line during
+ this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
+ ::= { xdsl2PMLineInitCurrEntry 14 }
+
+-------------------------------------------
+-- PM line history 15 Minutes --
+-------------------------------------------
+
+xdsl2PMLineHist15MinTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineHist15MinTable contains PM line history
+ for 15-minute intervals of DSL line."
+ ::= { xdsl2PMLine 3 }
+
+xdsl2PMLineHist15MinEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index of this
+ table is the transmission unit. The third index is the interval
+ number."
+ INDEX { ifIndex,
+ xdsl2PMLHist15MUnit,
+ xdsl2PMLHist15MInterval }
+ ::= { xdsl2PMLineHist15MinTable 1 }
+
+Xdsl2PMLineHist15MinEntry ::=
+ SEQUENCE {
+ xdsl2PMLHist15MUnit Xdsl2Unit,
+ xdsl2PMLHist15MInterval Unsigned32,
+ xdsl2PMLHist15MMonitoredTime Unsigned32,
+ xdsl2PMLHist15MFecs Counter32,
+ xdsl2PMLHist15MEs Counter32,
+
+ xdsl2PMLHist15MSes Counter32,
+ xdsl2PMLHist15MLoss Counter32,
+ xdsl2PMLHist15MUas Counter32,
+ xdsl2PMLHist15MValidInterval TruthValue
+ }
+
+xdsl2PMLHist15MUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMLineHist15MinEntry 1 }
+
+xdsl2PMLHist15MInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMLineHist15MinEntry 2 }
+
+xdsl2PMLHist15MMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMLineHist15MinEntry 3 }
+
+xdsl2PMLHist15MFecs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was at
+ least one FEC correction event for one or more bearer channels in
+ this line. This parameter is inhibited during UAS or SES."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+ and paragraph #7.2.1.2.1 (FECS-LFE)"
+ ::= { xdsl2PMLineHist15MinEntry 4 }
+
+xdsl2PMLHist15MEs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+ LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+ xTU-R: FEBE >= 1 for one or more bearer channels OR
+ LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+ and paragraph #7.2.1.2.2 (ES-LFE)"
+ ::= { xdsl2PMLineHist15MinEntry 5 }
+
+xdsl2PMLHist15MSes OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: (CRC-8 anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS >= 1
+ OR SEF >= 1 OR LPR >= 1.
+ xTU-R: (FEBE anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS-FE >= 1
+ OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+ and paragraph #7.2.1.2.3 (SES-LFE)"
+ ::= { xdsl2PMLineHist15MinEntry 6 }
+
+xdsl2PMLHist15MLoss OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was LOS (or
+ LOS-FE for xTU-R)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+ and paragraph #7.2.1.2.4 (LOSS-LFE)"
+ ::= { xdsl2PMLineHist15MinEntry 7 }
+
+xdsl2PMLHist15MUas OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "Count of seconds in Unavailability State during this
+ interval.
+ Unavailability begins at the onset of 10 contiguous severely
+ errored seconds, and ends at the onset of 10 contiguous seconds
+ with no severely errored seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+ and paragraph #7.2.1.2.5 (UAS-LFE)"
+ ::= { xdsl2PMLineHist15MinEntry 8 }
+
+xdsl2PMLHist15MValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMLineHist15MinEntry 9 }
+
+---------------------------------------
+-- PM line history 1 Day --
+---------------------------------------
+
+xdsl2PMLineHist1DayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineHist1DayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineHist1DayTable contains PM line history
+ for 24-hour intervals of DSL line."
+ ::= { xdsl2PMLine 4 }
+
+xdsl2PMLineHist1DayEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineHist1DayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index of this
+ table is the transmission unit.The third index is the interval
+ number."
+ INDEX { ifIndex,
+ xdsl2PMLHist1DUnit,
+ xdsl2PMLHist1DInterval }
+ ::= { xdsl2PMLineHist1DayTable 1 }
+
+Xdsl2PMLineHist1DayEntry ::=
+ SEQUENCE {
+ xdsl2PMLHist1DUnit Xdsl2Unit,
+
+ xdsl2PMLHist1DInterval Unsigned32,
+ xdsl2PMLHist1DMonitoredTime Unsigned32,
+ xdsl2PMLHist1DFecs Counter32,
+ xdsl2PMLHist1DEs Counter32,
+ xdsl2PMLHist1DSes Counter32,
+ xdsl2PMLHist1DLoss Counter32,
+ xdsl2PMLHist1DUas Counter32,
+ xdsl2PMLHist1DValidInterval TruthValue
+ }
+
+xdsl2PMLHist1DUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMLineHist1DayEntry 1 }
+
+xdsl2PMLHist1DInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMLineHist1DayEntry 2 }
+
+xdsl2PMLHist1DMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMLineHist1DayEntry 3 }
+
+xdsl2PMLHist1DFecs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was at
+ least one FEC correction event for one or more bearer channels in
+ this line. This parameter is inhibited during UAS or SES."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+ and paragraph #7.2.1.2.1 (FECS-LFE)"
+ ::= { xdsl2PMLineHist1DayEntry 4 }
+
+xdsl2PMLHist1DEs OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+ LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+ xTU-R: FEBE >= 1 for one or more bearer channels OR
+ LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+ and paragraph #7.2.1.2.2 (ES-LFE)"
+ ::= { xdsl2PMLineHist1DayEntry 5 }
+
+xdsl2PMLHist1DSes OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was:
+ xTU-C: (CRC-8 anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS >= 1
+ OR SEF >= 1 OR LPR >= 1.
+ xTU-R: (FEBE anomalies in one or more of the
+ received bearer channels) >= 18 OR LOS-FE >= 1
+ OR RDI >= 1 OR LPR-FE >= 1.
+ This parameter is inhibited during UAS."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+ and paragraph #7.2.1.2.3 (SES-LFE)"
+ ::= { xdsl2PMLineHist1DayEntry 6 }
+
+xdsl2PMLHist1DLoss OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds during this interval that there was LOS (or
+ LOS-FE for xTU-R)."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+ and paragraph #7.2.1.2.4 (LOSS-LFE)"
+ ::= { xdsl2PMLineHist1DayEntry 7 }
+
+xdsl2PMLHist1DUas OBJECT-TYPE
+ SYNTAX Counter32
+
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of seconds in Unavailability State during this
+ interval.
+ Unavailability begins at the onset of 10 contiguous severely
+ errored seconds, and ends at the onset of 10 contiguous seconds
+ with no severely errored seconds."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+ and paragraph #7.2.1.2.5 (UAS-LFE)"
+ ::= { xdsl2PMLineHist1DayEntry 8 }
+
+xdsl2PMLHist1DValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMLineHist1DayEntry 9 }
+
+-------------------------------------------
+-- PM line init history 15 Minutes --
+-------------------------------------------
+
+xdsl2PMLineInitHist15MinTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineInitHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineInitHist15MinTable contains PM line
+ initialization history for 15-minute intervals of DSL
+ line."
+ ::= { xdsl2PMLine 5 }
+
+xdsl2PMLineInitHist15MinEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineInitHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index is the
+ interval number."
+ INDEX { ifIndex,
+ xdsl2PMLInitHist15MInterval }
+ ::= { xdsl2PMLineInitHist15MinTable 1 }
+
+Xdsl2PMLineInitHist15MinEntry ::=
+ SEQUENCE {
+ xdsl2PMLInitHist15MInterval Unsigned32,
+ xdsl2PMLInitHist15MMonitoredTime Unsigned32,
+ xdsl2PMLInitHist15MFullInits Unsigned32,
+ xdsl2PMLInitHist15MFailedFullInits Unsigned32,
+ xdsl2PMLInitHist15MShortInits Unsigned32,
+ xdsl2PMLInitHist15MFailedShortInits Unsigned32,
+ xdsl2PMLInitHist15MValidInterval TruthValue
+ }
+
+xdsl2PMLInitHist15MInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMLineInitHist15MinEntry 1 }
+
+xdsl2PMLInitHist15MMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMLineInitHist15MinEntry 2 }
+
+xdsl2PMLInitHist15MFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of full initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
+ ::= { xdsl2PMLineInitHist15MinEntry 3 }
+
+xdsl2PMLInitHist15MFailedFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed full initializations on the line during this
+ interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
+ ::= { xdsl2PMLineInitHist15MinEntry 4 }
+
+xdsl2PMLInitHist15MShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of short initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
+ ::= { xdsl2PMLineInitHist15MinEntry 5 }
+
+xdsl2PMLInitHist15MFailedShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed short initializations on the line during
+ this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
+ ::= { xdsl2PMLineInitHist15MinEntry 6 }
+
+xdsl2PMLInitHist15MValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMLineInitHist15MinEntry 7 }
+
+-------------------------------------------
+-- PM line init history 1 Day --
+-------------------------------------------
+
+xdsl2PMLineInitHist1DayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMLineInitHist1DayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMLineInitHist1DayTable contains PM line
+ initialization history for 24-hour intervals for DSL
+ lines."
+ ::= { xdsl2PMLine 6 }
+
+xdsl2PMLineInitHist1DayEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMLineInitHist1DayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+ "One index of this table is an interface index where the
+ interface has an ifType of vdsl2(251). A second index is the
+ interval number."
+ INDEX { ifIndex,
+ xdsl2PMLInitHist1DInterval }
+ ::= { xdsl2PMLineInitHist1DayTable 1 }
+
+Xdsl2PMLineInitHist1DayEntry ::=
+ SEQUENCE {
+ xdsl2PMLInitHist1DInterval Unsigned32,
+ xdsl2PMLInitHist1DMonitoredTime Unsigned32,
+ xdsl2PMLInitHist1DFullInits Unsigned32,
+ xdsl2PMLInitHist1DFailedFullInits Unsigned32,
+ xdsl2PMLInitHist1DShortInits Unsigned32,
+ xdsl2PMLInitHist1DFailedShortInits Unsigned32,
+ xdsl2PMLInitHist1DValidInterval TruthValue
+ }
+
+xdsl2PMLInitHist1DInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMLineInitHist1DayEntry 1 }
+
+xdsl2PMLInitHist1DMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMLineInitHist1DayEntry 2 }
+
+xdsl2PMLInitHist1DFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of full initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
+ ::= { xdsl2PMLineInitHist1DayEntry 3 }
+
+xdsl2PMLInitHist1DFailedFullInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "Count of failed full initializations on the line during this
+ interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
+ ::= { xdsl2PMLineInitHist1DayEntry 4 }
+
+xdsl2PMLInitHist1DShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of short initializations attempted on the line
+ (successful and failed) during this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
+ ::= { xdsl2PMLineInitHist1DayEntry 5 }
+
+xdsl2PMLInitHist1DFailedShortInits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of failed short initializations on the line during
+ this interval."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
+ ::= { xdsl2PMLineInitHist1DayEntry 6 }
+
+xdsl2PMLInitHist1DValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMLineInitHist1DayEntry 7 }
+
+---------------------------------------------------
+-- PM channel current counters --
+---------------------------------------------------
+
+xdsl2PMChCurrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMChCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMChCurrTable contains current Performance
+ Monitoring results for DSL channels."
+ ::= { xdsl2PMChannel 1 }
+
+xdsl2PMChCurrEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMChCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of a DSL channel. A second index of
+ this table is the termination unit."
+ INDEX { ifIndex, xdsl2PMChCurrUnit }
+ ::= { xdsl2PMChCurrTable 1 }
+
+Xdsl2PMChCurrEntry ::=
+ SEQUENCE {
+ xdsl2PMChCurrUnit Xdsl2Unit,
+ xdsl2PMChCurr15MValidIntervals Unsigned32,
+ xdsl2PMChCurr15MInvalidIntervals Unsigned32,
+ xdsl2PMChCurr15MTimeElapsed HCPerfTimeElapsed,
+ xdsl2PMChCurr15MCodingViolations Unsigned32,
+ xdsl2PMChCurr15MCorrectedBlocks Unsigned32,
+ xdsl2PMChCurr1DayValidIntervals Unsigned32,
+ xdsl2PMChCurr1DayInvalidIntervals Unsigned32,
+ xdsl2PMChCurr1DayTimeElapsed HCPerfTimeElapsed,
+ xdsl2PMChCurr1DayCodingViolations Unsigned32,
+ xdsl2PMChCurr1DayCorrectedBlocks Unsigned32
+ }
+
+xdsl2PMChCurrUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMChCurrEntry 1 }
+
+xdsl2PMChCurr15MValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which data
+ was collected. The value will typically be equal to the maximum
+ number of 15-minute intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 15-minute intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+
+ maximum interval number for which data is available."
+ ::= { xdsl2PMChCurrEntry 2 }
+
+xdsl2PMChCurr15MInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMChCurrEntry 3 }
+
+xdsl2PMChCurr15MTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMChCurrEntry 4 }
+
+xdsl2PMChCurr15MCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+ channel during the interval. This parameter is inhibited during
+ UAS or SES. If the CRC is applied over multiple channels, then
+ each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+ counters related to the individual channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+ and paragraph #7.2.2.2.1 (CV-CFE)"
+ ::= { xdsl2PMChCurrEntry 5 }
+
+xdsl2PMChCurr15MCorrectedBlocks OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+ words) occurring in the channel during the interval. This
+ parameter is inhibited during UAS or SES. If the FEC is applied
+ over multiple channels, then each related FEC (or FFEC) anomaly
+ SHOULD increment each of the counters related to the individual
+ channels."
+
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+ and paragraph #7.2.2.2.2 (FEC-CFE)"
+ ::= { xdsl2PMChCurrEntry 6 }
+
+xdsl2PMChCurr1DayValidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which data was
+ collected. The value will typically be equal to the maximum
+ number of 24-hour intervals the implementation is planned to
+ store (i.e., beyond the scope of this MIB module) unless the
+ measurement was (re-)started recently, in which case the value
+ will be the number of complete 24-hour intervals for which
+ the agent has at least some data. In certain cases (e.g., in
+ the case where the agent is a proxy), it is possible that some
+ intervals are unavailable. In this case, this interval is the
+ maximum interval number for which data is available."
+ ::= { xdsl2PMChCurrEntry 7 }
+
+xdsl2PMChCurr1DayInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 24-hour PM intervals for which no data is
+ available. The value will typically be zero except in cases
+ where the data for some intervals are not available (e.g.,
+ in proxy situations)."
+ ::= { xdsl2PMChCurrEntry 8 }
+
+xdsl2PMChCurr1DayTimeElapsed OBJECT-TYPE
+ SYNTAX HCPerfTimeElapsed
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total elapsed seconds in this interval."
+ ::= { xdsl2PMChCurrEntry 9 }
+
+xdsl2PMChCurr1DayCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+ channel during the interval. This parameter is inhibited during
+
+ UAS or SES. If the CRC is applied over multiple channels, then
+ each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+ counters related to the individual channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+ and paragraph #7.2.2.2.1 (CV-CFE)"
+ ::= { xdsl2PMChCurrEntry 10 }
+
+xdsl2PMChCurr1DayCorrectedBlocks OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+ words) occurring in the channel during the interval. This
+ parameter is inhibited during UAS or SES. If the FEC is applied
+ over multiple channels, then each related FEC (or FFEC) anomaly
+ SHOULD increment each of the counters related to the individual
+ channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+ and paragraph #7.2.2.2.2 (FEC-CFE)"
+ ::= { xdsl2PMChCurrEntry 11 }
+
+-------------------------------------------
+-- PM channel history 15 Minutes --
+-------------------------------------------
+
+xdsl2PMChHist15MinTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMChHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMChHist15MinTable contains Performance
+ Monitoring (PM) history for 15-minute intervals for DSL channels
+ PM."
+ ::= { xdsl2PMChannel 2 }
+
+xdsl2PMChHist15MinEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMChHist15MinEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of a DSL channel. A second index of
+ this table is the transmission unit. The third index is the
+ interval number."
+ INDEX { ifIndex,
+ xdsl2PMChHist15MUnit,
+ xdsl2PMChHist15MInterval }
+
+ ::= { xdsl2PMChHist15MinTable 1 }
+
+Xdsl2PMChHist15MinEntry ::=
+ SEQUENCE {
+ xdsl2PMChHist15MUnit Xdsl2Unit,
+ xdsl2PMChHist15MInterval Unsigned32,
+ xdsl2PMChHist15MMonitoredTime Unsigned32,
+ xdsl2PMChHist15MCodingViolations Unsigned32,
+ xdsl2PMChHist15MCorrectedBlocks Unsigned32,
+ xdsl2PMChHist15MValidInterval TruthValue
+ }
+
+xdsl2PMChHist15MUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMChHist15MinEntry 1 }
+
+xdsl2PMChHist15MInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMChHist15MinEntry 2 }
+
+xdsl2PMChHist15MMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMChHist15MinEntry 3 }
+
+xdsl2PMChHist15MCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+ channel during the interval. This parameter is inhibited during
+ UAS or SES. If the CRC is applied over multiple channels, then
+ each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+ counters related to the individual channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+
+ and paragraph #7.2.2.2.1 (CV-CFE)"
+ ::= { xdsl2PMChHist15MinEntry 4 }
+
+xdsl2PMChHist15MCorrectedBlocks OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+ words) occurring in the channel during the interval. This
+ parameter is inhibited during UAS or SES. If the FEC is applied
+ over multiple channels, then each related FEC (or FFEC) anomaly
+ SHOULD increment each of the counters related to the individual
+ channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+ and paragraph #7.2.2.2.2 (FEC-CFE)"
+ ::= { xdsl2PMChHist15MinEntry 5 }
+
+xdsl2PMChHist15MValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMChHist15MinEntry 6 }
+
+------------------------------------------
+-- PM channel history 1 Day --
+------------------------------------------
+
+xdsl2PMChHist1DTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Xdsl2PMChHist1DEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table xdsl2PMChHist1DTable contains Performance
+ Monitoring (PM) history for 1-day intervals for DSL channels
+ PM."
+ ::= { xdsl2PMChannel 3 }
+
+xdsl2PMChHist1DEntry OBJECT-TYPE
+ SYNTAX Xdsl2PMChHist1DEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "One index of this table is an interface index where the
+ interface has an ifType of a DSL channel. A second index of
+
+ this table is the transmission unit. The third index is the
+ interval number."
+ INDEX { ifIndex,
+ xdsl2PMChHist1DUnit,
+ xdsl2PMChHist1DInterval }
+ ::= { xdsl2PMChHist1DTable 1 }
+
+Xdsl2PMChHist1DEntry ::=
+ SEQUENCE {
+ xdsl2PMChHist1DUnit Xdsl2Unit,
+ xdsl2PMChHist1DInterval Unsigned32,
+ xdsl2PMChHist1DMonitoredTime Unsigned32,
+ xdsl2PMChHist1DCodingViolations Unsigned32,
+ xdsl2PMChHist1DCorrectedBlocks Unsigned32,
+ xdsl2PMChHist1DValidInterval TruthValue
+ }
+
+xdsl2PMChHist1DUnit OBJECT-TYPE
+ SYNTAX Xdsl2Unit
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The termination unit."
+ ::= { xdsl2PMChHist1DEntry 1 }
+
+xdsl2PMChHist1DInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interval number."
+ ::= { xdsl2PMChHist1DEntry 2 }
+
+xdsl2PMChHist1DMonitoredTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total seconds monitored in this interval."
+ ::= { xdsl2PMChHist1DEntry 3 }
+
+xdsl2PMChHist1DCodingViolations OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+
+ channel during the interval. This parameter is inhibited during
+ UAS or SES. If the CRC is applied over multiple channels, then
+ each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+ counters related to the individual channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+ and paragraph #7.2.2.2.1 (CV-CFE)"
+ ::= { xdsl2PMChHist1DEntry 4 }
+
+xdsl2PMChHist1DCorrectedBlocks OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+ words) occurring in the channel during the interval. This
+ parameter is inhibited during UAS or SES. If the FEC is applied
+ over multiple channels, then each related FEC (or FFEC) anomaly
+ SHOULD increment each of the counters related to the individual
+ channels."
+ REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+ and paragraph #7.2.2.2.2 (FEC-CFE)"
+ ::= { xdsl2PMChHist1DEntry 5 }
+
+xdsl2PMChHist1DValidInterval OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is
+ valid."
+ ::= { xdsl2PMChHist1DEntry 6 }
+
+-------------------------------------------
+-- Notifications Group --
+-------------------------------------------
+
+xdsl2LinePerfFECSThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MFecs,
+ xdsl2LineAlarmConfProfileXtucThresh15MinFecs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the FEC seconds threshold
+ has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 1 }
+
+xdsl2LinePerfFECSThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MFecs,
+ xdsl2LineAlarmConfProfileXturThresh15MinFecs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the FEC seconds threshold
+ has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 2 }
+
+xdsl2LinePerfESThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MEs,
+ xdsl2LineAlarmConfProfileXtucThresh15MinEs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the errored seconds
+ threshold has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 3 }
+
+xdsl2LinePerfESThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MEs,
+ xdsl2LineAlarmConfProfileXturThresh15MinEs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the errored seconds
+ threshold has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 4 }
+
+xdsl2LinePerfSESThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MSes,
+ xdsl2LineAlarmConfProfileXtucThresh15MinSes
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the severely errored seconds
+ threshold has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 5 }
+
+xdsl2LinePerfSESThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MSes,
+ xdsl2LineAlarmConfProfileXturThresh15MinSes
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the severely errored seconds
+ threshold has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 6 }
+
+xdsl2LinePerfLOSSThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MLoss,
+ xdsl2LineAlarmConfProfileXtucThresh15MinLoss
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the LOS seconds
+ threshold has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 7 }
+
+xdsl2LinePerfLOSSThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MLoss,
+ xdsl2LineAlarmConfProfileXturThresh15MinLoss
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the LOS seconds
+ threshold has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 8 }
+
+xdsl2LinePerfUASThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MUas,
+ xdsl2LineAlarmConfProfileXtucThresh15MinUas
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the unavailable seconds
+ threshold has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 9 }
+
+xdsl2LinePerfUASThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLCurr15MUas,
+ xdsl2LineAlarmConfProfileXturThresh15MinUas
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the unavailable seconds
+ threshold has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 10 }
+
+xdsl2LinePerfCodingViolationsThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMChCurr15MCodingViolations,
+ xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the coding violations
+ threshold has been reached/exceeded for the referred xTU-C."
+ ::= { xdsl2Notifications 11 }
+
+xdsl2LinePerfCodingViolationsThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMChCurr15MCodingViolations,
+ xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the coding violations
+ threshold has been reached/exceeded for the referred xTU-R."
+ ::= { xdsl2Notifications 12 }
+
+xdsl2LinePerfCorrectedThreshXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMChCurr15MCorrectedBlocks,
+ xdsl2ChAlarmConfProfileXtucThresh15MinCorrected
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the corrected blocks
+ (FEC events) threshold has been reached/exceeded for the
+ referred xTU-C."
+ ::= { xdsl2Notifications 13 }
+
+xdsl2LinePerfCorrectedThreshXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMChCurr15MCorrectedBlocks,
+ xdsl2ChAlarmConfProfileXturThresh15MinCorrected
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the corrected blocks
+ (FEC events) threshold has been reached/exceeded for the
+ referred xTU-R."
+ ::= { xdsl2Notifications 14 }
+
+xdsl2LinePerfFailedFullInitThresh NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLInitCurr15MFailedFullInits,
+ xdsl2LineAlarmConfProfileThresh15MinFailedFullInt
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the failed full
+ initializations threshold has been reached/exceeded for the
+ referred ADSL/ADSL2 or ADSL2 line."
+ ::= { xdsl2Notifications 15 }
+
+xdsl2LinePerfFailedShortInitThresh NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2PMLInitCurr15MFailedShortInits,
+ xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that the failed short
+ initializations threshold has been reached/exceeded for the
+ referred VDSL2/ADSL/ADSL2 or ADSL2+ line."
+ ::= { xdsl2Notifications 16 }
+
+xdsl2LineStatusChangeXtuc NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2LineStatusXtuc
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that a status change is
+ detected for the referred xTU-C."
+
+ ::= { xdsl2Notifications 17 }
+
+xdsl2LineStatusChangeXtur NOTIFICATION-TYPE
+ OBJECTS
+ {
+ xdsl2LineStatusXtur
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification indicates that a status change is
+ detected for the referred xTU-R."
+ ::= { xdsl2Notifications 18 }
+
+ -- conformance information
+
+ xdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 }
+ xdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 }
+
+ xdsl2LineMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which
+ manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces."
+ MODULE -- this module
+ MANDATORY-GROUPS
+ {
+ xdsl2LineGroup,
+ xdsl2ChannelStatusGroup,
+ xdsl2SCStatusGroup,
+ xdsl2LineInventoryGroup,
+ xdsl2LineConfTemplateGroup,
+ xdsl2LineConfProfGroup,
+ xdsl2LineConfProfModeSpecGroup,
+ xdsl2LineConfProfModeSpecBandUsGroup,
+ xdsl2ChConfProfileGroup,
+ xdsl2LineAlarmConfTemplateGroup,
+ xdsl2PMLineCurrGroup,
+ xdsl2PMLineInitCurrGroup,
+ xdsl2PMLineHist15MinGroup,
+ xdsl2PMLineHist1DayGroup,
+ xdsl2PMLineInitHist15MinGroup,
+ xdsl2PMLineInitHist1DayGroup,
+ xdsl2PMChCurrGroup,
+ xdsl2PMChHist15MinGroup,
+ xdsl2PMChHist1DGroup
+ }
+
+ GROUP xdsl2LineFallbackGroup
+ DESCRIPTION
+ "The group of configuration, status, and commands
+ objects on the line level that are associated with the fallback
+ feature."
+
+ GROUP xdsl2LineBpscGroup
+ DESCRIPTION
+ "The group of configuration, status, and commands objects
+ on the line level that are associated with requesting a bits
+ per subcarrier measurement."
+
+ GROUP xdsl2LineSegmentGroup
+ DESCRIPTION
+ "The group of status and commands objects on the line
+ level that are used to hold the results of the
+ bits-per-subcarrier measurement."
+
+ GROUP xdsl2ChannelStatusAtmGroup
+ DESCRIPTION
+ "The group of status objects required when the data path
+ is ATM."
+
+ GROUP xdsl2ChannelStatusPtmGroup
+ DESCRIPTION
+ "The group of status objects required when the data path
+ is PTM."
+
+ GROUP xdsl2LineConfProfRaGroup
+ DESCRIPTION
+ "The group of objects required for controlling the
+ rate-adaptive behavior of the line."
+
+ GROUP xdsl2LineConfProfMsgMinGroup
+ DESCRIPTION
+ "The group of objects required for controlling the rate
+ reserved for Overhead traffic."
+
+ GROUP xdsl2LineAlarmConfProfileGroup
+ DESCRIPTION
+ "The group of objects that define the alarm thresholds
+ on line-level PM counters."
+
+ GROUP xdsl2ChAlarmConfProfileGroup
+ DESCRIPTION
+ "The group of objects that define the alarm thresholds
+ on channel-level PM counters."
+
+ GROUP xdsl2ChConfProfileAtmGroup
+ DESCRIPTION
+ "The group of configuration objects required when the data
+ path is ATM."
+
+ GROUP xdsl2ChConfProfileMinResGroup
+ DESCRIPTION
+ "The group of configuration objects required for the
+ reserved data rate."
+
+ GROUP xdsl2ChConfProfileOptAttrGroup
+ DESCRIPTION
+ "The group of various optional channel configuration
+ objects."
+
+ GROUP xdsl2PMLineInitCurrShortGroup
+ DESCRIPTION
+ "The group of PM counters for the current intervals short
+ initializations."
+
+ GROUP xdsl2PMLineInitHist15MinShortGroup
+ DESCRIPTION
+ "The group of PM counters for the previous 15-minute
+ intervals short initializations."
+
+ GROUP xdsl2PMLineInitHist1DayShortGroup
+ DESCRIPTION
+ "The group of PM counters for the previous 24-hour
+ intervals short initializations."
+
+ GROUP xdsl2ScalarSCGroup
+ DESCRIPTION
+ "The group of objects that report the available memory
+ resources for the DELT processes."
+
+ GROUP xdsl2ThreshNotificationGroup
+ DESCRIPTION
+ "The group of thresholds crossing notifications."
+
+ GROUP xdsl2StatusChangeNotificationGroup
+ DESCRIPTION
+ "The group of status change notifications."
+
+ ::= { xdsl2Compliances 1 }
+
+ -- units of conformance
+
+ xdsl2LineGroup OBJECT-GROUP
+
+ OBJECTS
+ {
+ xdsl2LineConfTemplate,
+ xdsl2LineAlarmConfTemplate,
+ xdsl2LineCmndConfPmsf,
+ xdsl2LineCmndConfLdsf,
+ xdsl2LineCmndConfLdsfFailReason,
+ xdsl2LineCmndAutomodeColdStart,
+ xdsl2LineCmndConfReset,
+ xdsl2LineStatusXtuTransSys,
+ xdsl2LineStatusPwrMngState,
+ xdsl2LineStatusInitResult,
+ xdsl2LineStatusLastStateDs,
+ xdsl2LineStatusLastStateUs,
+ xdsl2LineStatusXtur,
+ xdsl2LineStatusXtuc,
+ xdsl2LineStatusAttainableRateDs,
+ xdsl2LineStatusAttainableRateUs,
+ xdsl2LineStatusActPsdDs,
+ xdsl2LineStatusActPsdUs,
+ xdsl2LineStatusActAtpDs,
+ xdsl2LineStatusActAtpUs,
+ xdsl2LineStatusActProfile,
+ xdsl2LineStatusActLimitMask,
+ xdsl2LineStatusActUs0Mask,
+ xdsl2LineStatusActSnrModeDs,
+ xdsl2LineStatusActSnrModeUs,
+ xdsl2LineStatusElectricalLength,
+ xdsl2LineStatusTssiDs,
+ xdsl2LineStatusTssiUs,
+ xdsl2LineStatusMrefPsdDs,
+ xdsl2LineStatusMrefPsdUs,
+ xdsl2LineStatusTrellisDs,
+ xdsl2LineStatusTrellisUs,
+ xdsl2LineStatusActualCe,
+ xdsl2LineBandStatusLnAtten,
+ xdsl2LineBandStatusSigAtten,
+ xdsl2LineBandStatusSnrMargin
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of configuration, status, and commands objects
+ on the line level."
+ ::= { xdsl2Groups 1 }
+
+ xdsl2LineFallbackGroup OBJECT-GROUP
+ OBJECTS
+ {
+
+ xdsl2LineConfFallbackTemplate,
+ xdsl2LineStatusActTemplate
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of configuration, status, and commands
+ objects on the line level that are associated with the
+ fallback feature."
+ ::= { xdsl2Groups 2 }
+
+ xdsl2LineBpscGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LineCmndConfBpsc,
+ xdsl2LineCmndConfBpscFailReason,
+ xdsl2LineCmndConfBpscRequests
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of configuration, status, and commands
+ objects on the line level that are associated with requesting
+ a bits-per-subcarrier measurement."
+ ::= { xdsl2Groups 3 }
+
+ xdsl2LineSegmentGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LineSegmentBitsAlloc,
+ xdsl2LineSegmentRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of status and commands objects on the line
+ level that are used to hold the results of the
+ bits-per-subcarrier measurement."
+ ::= { xdsl2Groups 4 }
+
+ xdsl2ChannelStatusGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChStatusActDataRate,
+ xdsl2ChStatusPrevDataRate,
+ xdsl2ChStatusActDelay,
+ xdsl2ChStatusActInp,
+ xdsl2ChStatusInpReport,
+ xdsl2ChStatusNFec,
+ xdsl2ChStatusRFec,
+ xdsl2ChStatusLSymb,
+
+ xdsl2ChStatusIntlvDepth,
+ xdsl2ChStatusIntlvBlock,
+ xdsl2ChStatusLPath
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of status objects on the channel level."
+ ::= { xdsl2Groups 5 }
+
+ xdsl2ChannelStatusAtmGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChStatusAtmStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of status objects on the data path level
+ when it is ATM."
+ ::= { xdsl2Groups 6 }
+
+ xdsl2ChannelStatusPtmGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChStatusPtmStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of status objects on the data path level
+ when it is PTM."
+ ::= { xdsl2Groups 7 }
+
+ xdsl2SCStatusGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2SCStatusLinScale,
+ xdsl2SCStatusLinScGroupSize,
+ xdsl2SCStatusLogMt,
+ xdsl2SCStatusLogScGroupSize,
+ xdsl2SCStatusQlnMt,
+ xdsl2SCStatusQlnScGroupSize,
+ xdsl2SCStatusSnrMtime,
+ xdsl2SCStatusSnrScGroupSize,
+ xdsl2SCStatusBandLnAtten,
+ xdsl2SCStatusBandSigAtten,
+ xdsl2SCStatusAttainableRate,
+ xdsl2SCStatusRowStatus,
+ xdsl2SCStatusSegmentLinReal,
+ xdsl2SCStatusSegmentLinImg,
+
+ xdsl2SCStatusSegmentLog,
+ xdsl2SCStatusSegmentQln,
+ xdsl2SCStatusSegmentSnr,
+ xdsl2SCStatusSegmentBitsAlloc,
+ xdsl2SCStatusSegmentGainAlloc
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of status objects on the subcarrier level.
+ They are updated as a result of a DELT process."
+ ::= { xdsl2Groups 8 }
+
+ xdsl2LineInventoryGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LInvG994VendorId,
+ xdsl2LInvSystemVendorId,
+ xdsl2LInvVersionNumber,
+ xdsl2LInvSerialNumber,
+ xdsl2LInvSelfTestResult,
+ xdsl2LInvTransmissionCapabilities
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of inventory objects per xTU."
+ ::= { xdsl2Groups 9 }
+
+ xdsl2LineConfTemplateGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfTempLineProfile,
+ xdsl2LConfTempChan1ConfProfile,
+ xdsl2LConfTempChan1RaRatioDs,
+ xdsl2LConfTempChan1RaRatioUs,
+ xdsl2LConfTempChan2ConfProfile,
+ xdsl2LConfTempChan2RaRatioDs,
+ xdsl2LConfTempChan2RaRatioUs,
+ xdsl2LConfTempChan3ConfProfile,
+ xdsl2LConfTempChan3RaRatioDs,
+ xdsl2LConfTempChan3RaRatioUs,
+ xdsl2LConfTempChan4ConfProfile,
+ xdsl2LConfTempChan4RaRatioDs,
+ xdsl2LConfTempChan4RaRatioUs,
+ xdsl2LConfTempRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line configuration
+
+ template."
+ ::= { xdsl2Groups 10 }
+
+ xdsl2LineConfProfGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfProfScMaskDs,
+ xdsl2LConfProfScMaskUs,
+ xdsl2LConfProfVdsl2CarMask,
+ xdsl2LConfProfRfiBands,
+ xdsl2LConfProfRaModeDs,
+ xdsl2LConfProfRaModeUs,
+ xdsl2LConfProfTargetSnrmDs,
+ xdsl2LConfProfTargetSnrmUs,
+ xdsl2LConfProfMaxSnrmDs,
+ xdsl2LConfProfMaxSnrmUs,
+ xdsl2LConfProfMinSnrmDs,
+ xdsl2LConfProfMinSnrmUs,
+ xdsl2LConfProfCeFlag,
+ xdsl2LConfProfSnrModeDs,
+ xdsl2LConfProfSnrModeUs,
+ xdsl2LConfProfTxRefVnDs,
+ xdsl2LConfProfTxRefVnUs,
+ xdsl2LConfProfXtuTransSysEna,
+ xdsl2LConfProfPmMode,
+ xdsl2LConfProfL0Time,
+ xdsl2LConfProfL2Time,
+ xdsl2LConfProfL2Atpr,
+ xdsl2LConfProfL2Atprt,
+ xdsl2LConfProfProfiles,
+ xdsl2LConfProfDpboEPsd,
+ xdsl2LConfProfDpboEsEL,
+ xdsl2LConfProfDpboEsCableModelA,
+ xdsl2LConfProfDpboEsCableModelB,
+ xdsl2LConfProfDpboEsCableModelC,
+ xdsl2LConfProfDpboMus,
+ xdsl2LConfProfDpboFMin,
+ xdsl2LConfProfDpboFMax,
+ xdsl2LConfProfUpboKL,
+ xdsl2LConfProfUpboKLF,
+ xdsl2LConfProfUs0Mask,
+ xdsl2LConfProfForceInp,
+ xdsl2LConfProfRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line configuration
+ profile."
+
+ ::= { xdsl2Groups 11 }
+
+ xdsl2LineConfProfRaGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfProfRaUsNrmDs,
+ xdsl2LConfProfRaUsNrmUs,
+ xdsl2LConfProfRaUsTimeDs,
+ xdsl2LConfProfRaUsTimeUs,
+ xdsl2LConfProfRaDsNrmDs,
+ xdsl2LConfProfRaDsNrmUs,
+ xdsl2LConfProfRaDsTimeDs,
+ xdsl2LConfProfRaDsTimeUs
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects required for controlling the
+ rate-adaptive behavior of the line."
+ ::= { xdsl2Groups 12 }
+
+ xdsl2LineConfProfMsgMinGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfProfMsgMinUs,
+ xdsl2LConfProfMsgMinDs
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects required for controlling the rate
+ reserved for Overhead traffic."
+ ::= { xdsl2Groups 13 }
+
+ xdsl2LineConfProfModeSpecGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfProfMaxNomPsdDs,
+ xdsl2LConfProfMaxNomPsdUs,
+ xdsl2LConfProfMaxNomAtpDs,
+ xdsl2LConfProfMaxNomAtpUs,
+ xdsl2LConfProfMaxAggRxPwrUs,
+ xdsl2LConfProfPsdMaskDs,
+ xdsl2LConfProfPsdMaskUs,
+ xdsl2LConfProfPsdMaskSelectUs,
+ xdsl2LConfProfClassMask,
+ xdsl2LConfProfLimitMask,
+ xdsl2LConfProfUs0Disable,
+ xdsl2LConfProfModeSpecRowStatus
+ }
+
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line configuration profile
+ that have an instance for each operation mode allowed."
+ ::= { xdsl2Groups 14 }
+
+ xdsl2LineConfProfModeSpecBandUsGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LConfProfUpboPsdA,
+ xdsl2LConfProfUpboPsdB,
+ xdsl2LConfProfModeSpecBandUsRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line configuration profile
+ that have several per-upstream-band instances for each
+ operation mode allowed."
+ ::= { xdsl2Groups 15 }
+
+ xdsl2ChConfProfileGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChConfProfMinDataRateDs,
+ xdsl2ChConfProfMinDataRateUs,
+ xdsl2ChConfProfMaxDataRateDs,
+ xdsl2ChConfProfMaxDataRateUs,
+ xdsl2ChConfProfMinDataRateLowPwrDs,
+ xdsl2ChConfProfMinDataRateLowPwrUs,
+ xdsl2ChConfProfMaxDelayDs,
+ xdsl2ChConfProfMaxDelayUs,
+ xdsl2ChConfProfMinProtectionDs,
+ xdsl2ChConfProfMinProtectionUs,
+ xdsl2ChConfProfMinProtection8Ds,
+ xdsl2ChConfProfMinProtection8Us,
+ xdsl2ChConfProfMaxBerDs,
+ xdsl2ChConfProfMaxBerUs,
+ xdsl2ChConfProfUsDataRateDs,
+ xdsl2ChConfProfDsDataRateDs,
+ xdsl2ChConfProfUsDataRateUs,
+ xdsl2ChConfProfDsDataRateUs,
+ xdsl2ChConfProfRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a channel configuration
+ profile."
+ ::= { xdsl2Groups 16 }
+
+ xdsl2ChConfProfileAtmGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChConfProfImaEnabled,
+ xdsl2ChStatusAtmStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of configuration objects required when the data
+ path is ATM."
+ ::= { xdsl2Groups 17 }
+
+ xdsl2ChConfProfileMinResGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChConfProfMinResDataRateDs,
+ xdsl2ChConfProfMinResDataRateUs
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of configuration objects required for the
+ reserved data rate."
+ ::= { xdsl2Groups 18 }
+ xdsl2ChConfProfileOptAttrGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChConfProfMaxDelayVar,
+ xdsl2ChConfProfInitPolicy
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of various optional channel configuration
+ parameters."
+ ::= { xdsl2Groups 19 }
+
+ xdsl2LineAlarmConfTemplateGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LAlarmConfTempLineProfile,
+ xdsl2LAlarmConfTempChan1ConfProfile,
+ xdsl2LAlarmConfTempChan2ConfProfile,
+ xdsl2LAlarmConfTempChan3ConfProfile,
+ xdsl2LAlarmConfTempChan4ConfProfile,
+ xdsl2LAlarmConfTempRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line alarm template."
+
+ ::= { xdsl2Groups 20 }
+
+ xdsl2LineAlarmConfProfileGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2LineAlarmConfProfileXtucThresh15MinFecs,
+ xdsl2LineAlarmConfProfileXtucThresh15MinEs,
+ xdsl2LineAlarmConfProfileXtucThresh15MinSes,
+ xdsl2LineAlarmConfProfileXtucThresh15MinLoss,
+ xdsl2LineAlarmConfProfileXtucThresh15MinUas,
+ xdsl2LineAlarmConfProfileXturThresh15MinFecs,
+ xdsl2LineAlarmConfProfileXturThresh15MinEs,
+ xdsl2LineAlarmConfProfileXturThresh15MinSes,
+ xdsl2LineAlarmConfProfileXturThresh15MinLoss,
+ xdsl2LineAlarmConfProfileXturThresh15MinUas,
+ xdsl2LineAlarmConfProfileThresh15MinFailedFullInt,
+ xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt,
+ xdsl2LineAlarmConfProfileRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a line alarm profile."
+ ::= { xdsl2Groups 21 }
+
+ xdsl2ChAlarmConfProfileGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations,
+ xdsl2ChAlarmConfProfileXtucThresh15MinCorrected,
+ xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations,
+ xdsl2ChAlarmConfProfileXturThresh15MinCorrected,
+ xdsl2ChAlarmConfProfileRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects in a channel alarm profile."
+ ::= { xdsl2Groups 22 }
+
+ xdsl2PMLineCurrGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLCurr15MValidIntervals,
+ xdsl2PMLCurr15MInvalidIntervals,
+ xdsl2PMLCurr15MTimeElapsed,
+ xdsl2PMLCurr15MFecs,
+ xdsl2PMLCurr15MEs,
+ xdsl2PMLCurr15MSes,
+ xdsl2PMLCurr15MLoss,
+
+ xdsl2PMLCurr15MUas,
+ xdsl2PMLCurr1DayValidIntervals,
+ xdsl2PMLCurr1DayInvalidIntervals,
+ xdsl2PMLCurr1DayTimeElapsed,
+ xdsl2PMLCurr1DayFecs,
+ xdsl2PMLCurr1DayEs,
+ xdsl2PMLCurr1DaySes,
+ xdsl2PMLCurr1DayLoss,
+ xdsl2PMLCurr1DayUas
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the line-level
+ counters for current PM intervals."
+ ::= { xdsl2Groups 23 }
+
+ xdsl2PMLineInitCurrGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitCurr15MValidIntervals,
+ xdsl2PMLInitCurr15MInvalidIntervals,
+ xdsl2PMLInitCurr15MTimeElapsed,
+ xdsl2PMLInitCurr15MFullInits,
+ xdsl2PMLInitCurr15MFailedFullInits,
+ xdsl2PMLInitCurr1DayValidIntervals,
+ xdsl2PMLInitCurr1DayInvalidIntervals,
+ xdsl2PMLInitCurr1DayTimeElapsed,
+ xdsl2PMLInitCurr1DayFullInits,
+ xdsl2PMLInitCurr1DayFailedFullInits
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the full
+ initialization counters for current PM intervals."
+ ::= { xdsl2Groups 24 }
+
+ xdsl2PMLineInitCurrShortGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitCurr15MShortInits,
+ xdsl2PMLInitCurr15MFailedShortInits,
+ xdsl2PMLInitCurr1DayShortInits,
+ xdsl2PMLInitCurr1DayFailedShortInits
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the short
+ initialization counters for current PM intervals."
+
+ ::= { xdsl2Groups 25 }
+
+ xdsl2PMLineHist15MinGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLHist15MMonitoredTime,
+ xdsl2PMLHist15MFecs,
+ xdsl2PMLHist15MEs,
+ xdsl2PMLHist15MSes,
+ xdsl2PMLHist15MLoss,
+ xdsl2PMLHist15MUas,
+ xdsl2PMLHist15MValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of line-level PM counters for the previous
+ 15-minute intervals."
+ ::= { xdsl2Groups 26 }
+
+ xdsl2PMLineHist1DayGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLHist1DMonitoredTime,
+ xdsl2PMLHist1DFecs,
+ xdsl2PMLHist1DEs,
+ xdsl2PMLHist1DSes,
+ xdsl2PMLHist1DLoss,
+ xdsl2PMLHist1DUas,
+ xdsl2PMLHist1DValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of line-level PM counters for the previous
+ 24-hour intervals."
+ ::= { xdsl2Groups 27 }
+
+ xdsl2PMLineInitHist15MinGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitHist15MMonitoredTime,
+ xdsl2PMLInitHist15MFullInits,
+ xdsl2PMLInitHist15MFailedFullInits,
+ xdsl2PMLInitHist15MValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of PM counters for the previous 15-minute
+ interval full initializations."
+
+ ::= { xdsl2Groups 28 }
+
+ xdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitHist15MShortInits,
+ xdsl2PMLInitHist15MFailedShortInits
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of PM counters for the previous 15-minute
+ interval short initializations."
+ ::= { xdsl2Groups 29 }
+
+ xdsl2PMLineInitHist1DayGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitHist1DMonitoredTime,
+ xdsl2PMLInitHist1DFullInits,
+ xdsl2PMLInitHist1DFailedFullInits,
+ xdsl2PMLInitHist1DValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of PM counters for the previous 24-hour
+ interval full initializations."
+ ::= { xdsl2Groups 30 }
+
+ xdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMLInitHist1DShortInits,
+ xdsl2PMLInitHist1DFailedShortInits
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of PM counters for the previous 24-hour
+ interval short initializations."
+ ::= { xdsl2Groups 31 }
+
+ xdsl2PMChCurrGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMChCurr15MValidIntervals,
+ xdsl2PMChCurr15MInvalidIntervals,
+ xdsl2PMChCurr15MTimeElapsed,
+ xdsl2PMChCurr15MCodingViolations,
+ xdsl2PMChCurr15MCorrectedBlocks,
+
+ xdsl2PMChCurr1DayValidIntervals,
+ xdsl2PMChCurr1DayInvalidIntervals,
+ xdsl2PMChCurr1DayTimeElapsed,
+ xdsl2PMChCurr1DayCodingViolations,
+ xdsl2PMChCurr1DayCorrectedBlocks
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the channel-level
+ counters for current PM intervals."
+ ::= { xdsl2Groups 32 }
+
+ xdsl2PMChHist15MinGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMChHist15MMonitoredTime,
+ xdsl2PMChHist15MCodingViolations,
+ xdsl2PMChHist15MCorrectedBlocks,
+ xdsl2PMChHist15MValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the channel-level
+ counters for previous 15-minute PM intervals."
+ ::= { xdsl2Groups 33 }
+
+ xdsl2PMChHist1DGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2PMChHist1DMonitoredTime,
+ xdsl2PMChHist1DCodingViolations,
+ xdsl2PMChHist1DCorrectedBlocks,
+ xdsl2PMChHist1DValidInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that report the channel-level
+ counters for previous 24-hour PM intervals."
+ ::= { xdsl2Groups 34 }
+
+ xdsl2ScalarSCGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xdsl2ScalarSCMaxInterfaces,
+ xdsl2ScalarSCAvailInterfaces
+ }
+ STATUS current
+ DESCRIPTION
+
+ "The group of objects that report the available memory
+ resources for DELT processes."
+ ::= { xdsl2Groups 35 }
+
+ xdsl2ThreshNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS
+ {
+ xdsl2LinePerfFECSThreshXtuc,
+ xdsl2LinePerfFECSThreshXtur,
+ xdsl2LinePerfESThreshXtuc,
+ xdsl2LinePerfESThreshXtur,
+ xdsl2LinePerfSESThreshXtuc,
+ xdsl2LinePerfSESThreshXtur,
+ xdsl2LinePerfLOSSThreshXtuc,
+ xdsl2LinePerfLOSSThreshXtur,
+ xdsl2LinePerfUASThreshXtuc,
+ xdsl2LinePerfUASThreshXtur,
+ xdsl2LinePerfCodingViolationsThreshXtuc,
+ xdsl2LinePerfCodingViolationsThreshXtur,
+ xdsl2LinePerfCorrectedThreshXtuc,
+ xdsl2LinePerfCorrectedThreshXtur,
+ xdsl2LinePerfFailedFullInitThresh,
+ xdsl2LinePerfFailedShortInitThresh
+ }
+ STATUS current
+ DESCRIPTION
+ "This group supports notifications of significant
+ conditions associated with DSL lines."
+ ::= { xdsl2Groups 36 }
+
+ xdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS
+ {
+ xdsl2LineStatusChangeXtuc,
+ xdsl2LineStatusChangeXtur
+ }
+ STATUS current
+ DESCRIPTION
+ "This group supports notifications of thresholds crossing
+ associated with DSL lines."
+ ::= { xdsl2Groups 37 }
+
+END
+
|