Initial commitHEADmain

1 files changed, 1830 insertions, 0 deletions

diff --git a/MIBS/adva/ADVA-FSPR7-MODULE-ENCRYPTION-MIB b/MIBS/adva/ADVA-FSPR7-MODULE-ENCRYPTION-MIB
new file mode 100644
index 0000000..d751b6e
--- /dev/null
+++ b/MIBS/adva/ADVA-FSPR7-MODULE-ENCRYPTION-MIB
@@ -0,0 +1,1830 @@
+--  ***************************************************************************
+--  ADVA-FSPR7-MODULE-ENCRYPTION-MIB.txt
+--
+--               ADVA AG Optical Networking Module Encryption MIB File
+--
+--  Copyright 2011 ADVA AG Optical Networking.
+--
+--  All rights reserved.
+--  ***************************************************************************
+
+
+--  MIB definitions required for Module Encryption management.
+
+ADVA-FSPR7-MODULE-ENCRYPTION-MIB DEFINITIONS ::= BEGIN 
+
+IMPORTS
+
+
+
+    TEXTUAL-CONVENTION,
+    DateAndTime,
+    TruthValue
+                FROM SNMPv2-TC
+
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+                FROM SNMPv2-CONF
+
+
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Integer32,
+    Unsigned32
+                FROM SNMPv2-SMI
+
+
+    SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB
+
+
+    fspR7,
+    EntityIndex,
+    entityIndex
+                FROM ADVA-MIB
+
+
+    entityEqptShelfNo,
+    entityEqptSlotNo,
+    entityEqptPortNo,
+    entityEqptExtNo,
+    entityEqptClassName,
+    entityFacilityShelfNo,
+    entityFacilitySlotNo,
+    entityFacilityPortNo,
+    entityFacilityExtNo,
+    entityFacilityClassName
+                FROM ADVA-FSPR7-MIB
+
+
+    FspR7RequestErrorType,
+    FspR7RequestErrorTypeAes,
+    FspR7RlsAction,
+    FspR7RlsActionCaps,
+    FspR7SnmpHexString,
+    FspR7Unsigned32Caps
+                FROM ADVA-FSPR7-TC-MIB;
+
+moduleEncryptionMIB MODULE-IDENTITY
+
+    LAST-UPDATED "201805280000Z"
+
+    ORGANIZATION "ADVA Optical Networking"
+
+    CONTACT-INFO "EMEA Support
+                  Phone : +49 89 89 0665 848
+                  Fax   : +49 89 89 0665 22848
+                  Email : support@advaoptical.com
+
+                  North American Support
+                  Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico)
+                  Fax   : + 1 806 741 8529 (elsewhere)
+                  Email : support-usa@advaoptical.com
+
+                  Asia Pacific Support
+                  Phone : + 1 866 442 2382 (other toll-free numbers available in some countries)
+                  Email : support-asia@advaoptical.com"
+
+    DESCRIPTION   "This is a MIB definition for ADVA AG Optical Networking module encryption management."
+
+    REVISION        "201805280000Z"
+    DESCRIPTION     "FSP3000 F7 Release 17.2.2 MIB."
+
+    REVISION        "201804170000Z"
+    DESCRIPTION     "FSP3000 F7 Release 17.2.1 MIB."
+
+    REVISION        "201803150000Z"
+    DESCRIPTION     "FSP3000 F7 Release 17.1.2 MIB."
+
+    REVISION        "201712070000Z"
+    DESCRIPTION     "FSP3000 F7 Release 17.1.1 MIB."
+
+    REVISION        "201604010000Z"
+    DESCRIPTION     "FSP3000 F7 Release 16.1.1 MIB."
+
+    REVISION        "201512100000Z"
+    DESCRIPTION     "FSP3000 F7 Release 15.2.1 MIB."
+
+    REVISION        "201308200000Z"
+    DESCRIPTION     "FSP3000 F7 Release 12.1.1 MIB."
+
+    REVISION        "201102160000Z"
+    DESCRIPTION     "FSP3000 F7 Release 10.3.1 MIB."
+    ::= { fspR7 5 }
+
+encryptionMIB
+    OBJECT IDENTIFIER ::= { moduleEncryptionMIB 1 }
+
+moduleEncryptionObjects
+    OBJECT IDENTIFIER ::= { encryptionMIB 2 }
+
+portEncryptionObjects
+    OBJECT IDENTIFIER ::= { encryptionMIB 3 }
+
+encryptionPerformanceMonitoring
+    OBJECT IDENTIFIER ::= { encryptionMIB 4 }
+
+encryptionDiagnostics
+    OBJECT IDENTIFIER ::= { encryptionMIB 5 }
+
+CryptoFspR7CryBoot ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Encryption Restart"
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            warmStart(2),
+            warmStartFwp(3),
+            coldStart(4),
+            coldStartFwp(5)
+        }
+
+CryptoFspR7CryBootCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Encryption Restart"
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capWarmStart(2),
+            capWarmStartFwp(3),
+            capColdStart(4),
+            capColdStartFwp(5)
+        }
+
+CryptoFspR7EnableDisable ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Enable/Disable variable."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            enable(1),
+            disable(2)
+        }
+
+CryptoFspR7EnableDisableCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Enable/Disable variable."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capEnable(1),
+            capDisable(2)
+        }
+
+CryptoFspR7EncryptionCommunication ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Embedded Communication Channel used to support Encryption"
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            tcm1(1),
+            tcm2(2),
+            tcm3(3),
+            tcm4(4),
+            tcm5(5),
+            tcm6(6),
+            gcc0(7),
+            gcc1(8),
+            gcc2(9),
+            gcc1gcc2(10),
+            res1(11), --ODU OH row 4 column 9 - 12
+            res2(12), --ODU OH row 4 column 11 - 14
+            tcm1tcm2(13),
+            tcm2tcm3(14),
+            tcm3tcm4(15),
+            tcm4tcm5(16),
+            tcm5tcm6(17),
+            none(18)
+        }
+
+CryptoFspR7EncryptionCommunicationCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Embedded Communication Channel used to support Encryption"
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capTcm1(1),
+            capTcm2(2),
+            capTcm3(3),
+            capTcm4(4),
+            capTcm5(5),
+            capTcm6(6),
+            capGcc0(7),
+            capGcc1(8),
+            capGcc2(9),
+            capGcc1gcc2(10),
+            capRes1(11),
+            capRes2(12),
+            capTcm1tcm2(13),
+            capTcm2tcm3(14),
+            capTcm3tcm4(15),
+            capTcm4tcm5(16),
+            capTcm5tcm6(17),
+            capNone(18)
+        }
+
+CryptoFspR7EncryptionReset ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for module 'reset to factory' operation. The rls(1) value
+        means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the
+        'reset to factory' operation immediately."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            rtf(2) --Manual reset,  All passwords are cleared
+        }
+
+CryptoFspR7EncryptionResetCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for module 'reset to factory' operation. The rls(1) value
+        means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the
+        'reset to factory' operation immediately."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capRtf(2)
+        }
+
+CryptoFspR7EncryptionSwitch ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for disabling the encrypted mode."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            oprCryptoOff(2)
+        }
+
+CryptoFspR7EncryptionSwitchCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for disabling the encrypted mode."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capOprCryptoOff(2)
+        }
+
+CryptoFspR7ForceKeyExchange ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for forcing the key exchange process between
+        encryption-capable modules. Successful process startup does not mean that
+        whole operation succeeded."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            oprKeyExchg(2)
+        }
+
+CryptoFspR7ForceKeyExchangeCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for forcing the key exchange process between
+        encryption-capable modules. Successful process startup does not mean that
+        whole operation succeeded."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capOprKeyExchg(2)
+        }
+
+CryptoFspR7KeyExchangeForcedClear ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for reseting the key exchange failure status."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            reset(2)
+        }
+
+CryptoFspR7KeyExchangeForcedClearCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention for reseting the key exchange failure status."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capReset(2)
+        }
+
+CryptoFspR7SelfTestOperation ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Encryption selftest"
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            rls(1),
+            oprSelfTest(2)
+        }
+
+CryptoFspR7SelfTestOperationCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Encryption selftest"
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capRls(1),
+            capOprSelfTest(2)
+        }
+
+CryptoFspR7SessionKeyLifetime ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention presenting available key lifetime periods for an encrypted sessions."
+  SYNTAX    INTEGER
+        {
+            undefined(0),
+            lifetime30min(1),
+            lifetime1h(2),
+            lifetime2h(3),
+            lifetime3h(4),
+            lifetime6h(5),
+            lifetime12h(6),
+            lifetime1d(7),
+            lifetime2d(8),
+            lifetime3d(9),
+            lifetime1w(10),
+            lifetime2w(11),
+            lifetime3w(12),
+            lifetimeMax(13),
+            lifetime330min(14),
+            lifetime11h(15)
+        }
+
+CryptoFspR7SessionKeyLifetimeCaps ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+        "Textual-Convention presenting available key lifetime periods for an encrypted sessions."
+  SYNTAX    BITS
+        {
+            capUndefined(0),
+            capLifetime30min(1),
+            capLifetime1h(2),
+            capLifetime2h(3),
+            capLifetime3h(4),
+            capLifetime6h(5),
+            capLifetime12h(6),
+            capLifetime1d(7),
+            capLifetime2d(8),
+            capLifetime3d(9),
+            capLifetime1w(10),
+            capLifetime2w(11),
+            capLifetime3w(12),
+            capLifetimeMax(13),
+            capLifetime330min(14),
+            capLifetime11h(15)
+        }
+
+
+--    mib-oriented scalars
+
+cryptoOfficerPassword OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "This object must be present in every set-request regarding encryption functionality."
+    ::= { moduleEncryptionObjects 1 }
+
+cryptoOfficerPasswordError OBJECT-TYPE
+    SYNTAX            INTEGER
+        {
+            undefined(0),
+            passwdOk(1),
+            passwdInvalid(2),
+            passwdRejected(3),
+            passwdNotInit(4),
+            passwdTooSimple(5),
+            passwdValidationAborted(6),
+            none(7)
+        }
+
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Last error related to set-request perform on that table."
+    ::= { moduleEncryptionObjects 2 }
+
+cryptoOfficerPasswordReqId OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Set-Request id for which cryptoOfficerPasswordError contains value."
+    ::= { moduleEncryptionObjects 3 }
+
+
+--    module encryption configuration
+
+cryptoModuleConfigTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoModuleConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related writeable parameters defined per module."
+    ::= { moduleEncryptionObjects 10 }
+
+cryptoModuleConfigEntry OBJECT-TYPE
+    SYNTAX        CryptoModuleConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable module."
+    INDEX       {
+                  cryptoModuleConfigIndex
+                }
+    ::= { cryptoModuleConfigTable 1 }
+
+CryptoModuleConfigEntry ::= SEQUENCE
+  {    cryptoModuleConfigIndex EntityIndex,
+    cryptoModuleConfigCryptoOfficerPassword SnmpAdminString,
+    cryptoModuleConfigResetToFactory CryptoFspR7EncryptionReset,
+    cryptoModuleConfigFirmwareUpdateState CryptoFspR7EnableDisable,
+    cryptoModuleConfigFirmwareVersion SnmpAdminString,
+    cryptoModuleConfigSelfTestOperation CryptoFspR7SelfTestOperation }
+
+cryptoModuleConfigIndex OBJECT-TYPE
+    SYNTAX        EntityIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Address of an encryption capable module."
+    ::= { cryptoModuleConfigEntry 1 }
+
+cryptoModuleConfigCryptoOfficerPassword OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
+        of this object will result with noSuchName error."
+    ::= { cryptoModuleConfigEntry 2 }
+
+cryptoModuleConfigResetToFactory OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionReset
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Executes 'reset to factory' action."
+    ::= { cryptoModuleConfigEntry 3 }
+
+cryptoModuleConfigFirmwareUpdateState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Determines if it is allowed for a module to perform firmware upgrade."
+    ::= { cryptoModuleConfigEntry 4 }
+
+cryptoModuleConfigFirmwareVersion OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Firmware package version designated for an upgrade."
+    ::= { cryptoModuleConfigEntry 5 }
+
+cryptoModuleConfigSelfTestOperation OBJECT-TYPE
+    SYNTAX        CryptoFspR7SelfTestOperation
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Starts self-tests."
+    ::= { cryptoModuleConfigEntry 6 }
+
+
+--    module encryption monitoring
+
+cryptoModuleStatusTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoModuleStatusEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related readable parameters defined per module."
+    ::= { moduleEncryptionObjects 11 }
+
+cryptoModuleStatusEntry OBJECT-TYPE
+    SYNTAX        CryptoModuleStatusEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable module."
+    INDEX       {
+                  cryptoModuleConfigIndex
+                }
+    ::= { cryptoModuleStatusTable 1 }
+
+CryptoModuleStatusEntry ::= SEQUENCE
+  {    cryptoModuleStatusIndex EntityIndex,
+    cryptoModuleStatusFailureLoginCount Unsigned32,
+    cryptoModuleStatusSuccessfulLoginDateAndTime DateAndTime,
+    cryptoModuleStatusUnsuccessfulLoginDateAndTime DateAndTime,
+    cryptoModuleStatusResetToFactoryCapability CryptoFspR7EnableDisable }
+
+cryptoModuleStatusIndex OBJECT-TYPE
+    SYNTAX        EntityIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Address of an encryption capable module."
+    ::= { cryptoModuleStatusEntry 1 }
+
+cryptoModuleStatusFailureLoginCount OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3 | 4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Number of unsuccessful Crypto Officer log-in attempts."
+    ::= { cryptoModuleStatusEntry 2 }
+
+cryptoModuleStatusSuccessfulLoginDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a last successful Crypto Officer login."
+    ::= { cryptoModuleStatusEntry 3 }
+
+cryptoModuleStatusUnsuccessfulLoginDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a last unsuccessful Crypto Officer login."
+    ::= { cryptoModuleStatusEntry 4 }
+
+cryptoModuleStatusResetToFactoryCapability OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The status of possibility to perform Reset To Factory operation. If disable(2) then
+        cryptoModuleConfigResetToFactory cannot be used, otherwise operation will fail."
+    ::= { cryptoModuleStatusEntry 5 }
+
+
+--    five index scheme module encryption 
+
+cryptoModuleTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoModuleEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related parameters defined per module."
+    ::= { moduleEncryptionObjects 20 }
+
+cryptoModuleEntry OBJECT-TYPE
+    SYNTAX        CryptoModuleEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable module."
+    INDEX       {
+                  entityEqptShelfNo,
+                  entityEqptSlotNo,
+                  entityEqptPortNo,
+                  entityEqptExtNo,
+                  entityEqptClassName
+                }
+    ::= { cryptoModuleTable 1 }
+
+CryptoModuleEntry ::= SEQUENCE
+  {    cryptoModuleCryptoOfficerPassword SnmpAdminString,
+    cryptoModuleResetToFactory CryptoFspR7EncryptionReset,
+    cryptoModuleFirmwareUpdateState CryptoFspR7EnableDisable,
+    cryptoModuleFirmwareVersion SnmpAdminString,
+    cryptoModuleSelfTestOperation CryptoFspR7SelfTestOperation,
+    cryptoModuleFailureLoginCount Unsigned32,
+    cryptoModuleSuccessfulLoginDateAndTime DateAndTime,
+    cryptoModuleUnsuccessfulLoginDateAndTime DateAndTime,
+    cryptoModuleFwpHash FspR7SnmpHexString,
+    cryptoModuleCryBoot CryptoFspR7CryBoot,
+    cryptoModuleStbyFwpHash FspR7SnmpHexString,
+    cryptoModuleSelfTestExecute Unsigned32,
+    cryptoModuleSelfTestResult Unsigned32 }
+
+cryptoModuleCryptoOfficerPassword OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
+        of this object will result with noSuchName error."
+    ::= { cryptoModuleEntry 1 }
+
+cryptoModuleResetToFactory OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionReset
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Executes 'reset to factory' action."
+    ::= { cryptoModuleEntry 2 }
+
+cryptoModuleFirmwareUpdateState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Determines if it is allowed for a module to perform firmware upgrade."
+    ::= { cryptoModuleEntry 3 }
+
+cryptoModuleFirmwareVersion OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Firmware package version designated for an upgrade."
+    ::= { cryptoModuleEntry 4 }
+
+cryptoModuleSelfTestOperation OBJECT-TYPE
+    SYNTAX        CryptoFspR7SelfTestOperation
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Starts self-tests."
+    ::= { cryptoModuleEntry 5 }
+
+cryptoModuleFailureLoginCount OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3 | 4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Number of unsuccessful Crypto Officer log-in attempts."
+    ::= { cryptoModuleEntry 6 }
+
+cryptoModuleSuccessfulLoginDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a last successful Crypto Officer login."
+    ::= { cryptoModuleEntry 7 }
+
+cryptoModuleUnsuccessfulLoginDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a last unsuccessful Crypto Officer login."
+    ::= { cryptoModuleEntry 8 }
+
+cryptoModuleFwpHash OBJECT-TYPE
+    SYNTAX        FspR7SnmpHexString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Hash value calculated for the firmware package using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted."
+    ::= { cryptoModuleEntry 9 }
+
+cryptoModuleCryBoot OBJECT-TYPE
+    SYNTAX        CryptoFspR7CryBoot
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Encryption Restart"
+    ::= { cryptoModuleEntry 10 }
+
+cryptoModuleStbyFwpHash OBJECT-TYPE
+    SYNTAX        FspR7SnmpHexString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Hash value calculated for the standby firmware package of the using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted."
+    ::= { cryptoModuleEntry 11 }
+
+cryptoModuleSelfTestExecute OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Executed selftests"
+    ::= { cryptoModuleEntry 12 }
+
+cryptoModuleSelfTestResult OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Result of Selftest"
+    ::= { cryptoModuleEntry 13 }
+
+cryptoModuleCapTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoModuleCapEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related parameters defined per module."
+    ::= { moduleEncryptionObjects 21 }
+
+cryptoModuleCapEntry OBJECT-TYPE
+    SYNTAX        CryptoModuleCapEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable module."
+    INDEX       {
+                  entityEqptShelfNo,
+                  entityEqptSlotNo,
+                  entityEqptPortNo,
+                  entityEqptExtNo,
+                  entityEqptClassName
+                }
+    ::= { cryptoModuleCapTable 1 }
+
+CryptoModuleCapEntry ::= SEQUENCE
+  {    cryptoModuleCapCryptoOfficerPassword Integer32,
+    cryptoModuleCapResetToFactory CryptoFspR7EncryptionResetCaps,
+    cryptoModuleCapFirmwareUpdateState CryptoFspR7EnableDisableCaps,
+    cryptoModuleCapFirmwareVersion Integer32,
+    cryptoModuleCapSelfTestOperation CryptoFspR7SelfTestOperationCaps,
+    cryptoModuleCapCryBoot CryptoFspR7CryBootCaps }
+
+cryptoModuleCapCryptoOfficerPassword OBJECT-TYPE
+    SYNTAX        Integer32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
+        of this object will result with noSuchName error."
+    ::= { cryptoModuleCapEntry 1 }
+
+cryptoModuleCapResetToFactory OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionResetCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Executes 'reset to factory' action."
+    ::= { cryptoModuleCapEntry 2 }
+
+cryptoModuleCapFirmwareUpdateState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisableCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Determines if it is allowed for a module to perform firmware upgrade."
+    ::= { cryptoModuleCapEntry 3 }
+
+cryptoModuleCapFirmwareVersion OBJECT-TYPE
+    SYNTAX        Integer32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Firmware package version designated for an upgrade."
+    ::= { cryptoModuleCapEntry 4 }
+
+cryptoModuleCapSelfTestOperation OBJECT-TYPE
+    SYNTAX        CryptoFspR7SelfTestOperationCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Starts self-tests."
+    ::= { cryptoModuleCapEntry 5 }
+
+cryptoModuleCapCryBoot OBJECT-TYPE
+    SYNTAX        CryptoFspR7CryBootCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption Restart"
+    ::= { cryptoModuleCapEntry 6 }
+
+
+--    port encryption configuration
+
+cryptoPortConfigTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoPortConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related writeable parameters defined per port."
+    ::= { portEncryptionObjects 12 }
+
+cryptoPortConfigEntry OBJECT-TYPE
+    SYNTAX        CryptoPortConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable port."
+    INDEX       {
+                  cryptoPortConfigIndex
+                }
+    ::= { cryptoPortConfigTable 1 }
+
+CryptoPortConfigEntry ::= SEQUENCE
+  {    cryptoPortConfigIndex EntityIndex,
+    cryptoPortConfigAuthKey SnmpAdminString,
+    cryptoPortConfigAuthKeyLifeTime CryptoFspR7SessionKeyLifetime,
+    cryptoPortConfigEncryptionOffState CryptoFspR7EnableDisable,
+    cryptoPortConfigEncryptionOff CryptoFspR7EncryptionSwitch,
+    cryptoPortConfigForceKeyExchange CryptoFspR7ForceKeyExchange,
+    cryptoPortConfigKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear }
+
+cryptoPortConfigIndex OBJECT-TYPE
+    SYNTAX        EntityIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Address of an encryption capable port."
+    ::= { cryptoPortConfigEntry 1 }
+
+cryptoPortConfigAuthKey OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Encryption password being an input to generate an authentication key used to
+        traffic encryption between ports. This object can be write only. Read attempt
+        will fail with noSuchName error."
+    ::= { cryptoPortConfigEntry 2 }
+
+cryptoPortConfigAuthKeyLifeTime OBJECT-TYPE
+    SYNTAX        CryptoFspR7SessionKeyLifetime
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Determines a life period of an introduced authentication key for a traffic encryption."
+    ::= { cryptoPortConfigEntry 3 }
+
+cryptoPortConfigEncryptionOffState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Enable/disable possibility of using encryption switch. This is an additional trigger required to
+        make a transition into transparent mode in two steps."
+    ::= { cryptoPortConfigEntry 4 }
+
+cryptoPortConfigEncryptionOff OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionSwitch
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Disable/enable encryption switch."
+    ::= { cryptoPortConfigEntry 5 }
+
+cryptoPortConfigForceKeyExchange OBJECT-TYPE
+    SYNTAX        CryptoFspR7ForceKeyExchange
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Force key exchange."
+    ::= { cryptoPortConfigEntry 6 }
+
+cryptoPortConfigKeyExchangeForcedClear OBJECT-TYPE
+    SYNTAX        CryptoFspR7KeyExchangeForcedClear
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
+    ::= { cryptoPortConfigEntry 7 }
+
+
+--    port encryption monitoring
+
+cryptoPortStatusTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoPortStatusEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related readable parameters defined per port."
+    ::= { portEncryptionObjects 13 }
+
+cryptoPortStatusEntry OBJECT-TYPE
+    SYNTAX        CryptoPortStatusEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable port."
+    INDEX       {
+                  cryptoPortStatusIndex
+                }
+    ::= { cryptoPortStatusTable 1 }
+
+CryptoPortStatusEntry ::= SEQUENCE
+  {    cryptoPortStatusIndex EntityIndex,
+    cryptoPortStatusEncryptionOffTimeRemaining Unsigned32,
+    cryptoPortStatusFailureKeyExchangeCount Unsigned32,
+    cryptoPortStatusSuccessfulKeyExchangeDateAndTime DateAndTime,
+    cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime DateAndTime,
+    cryptoPortStatusAuthKeyLifeTimeRemaining Unsigned32,
+    cryptoPortStatusEncryptionOffCapability CryptoFspR7EnableDisable }
+
+cryptoPortStatusIndex OBJECT-TYPE
+    SYNTAX        EntityIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Address of an encryption capable module."
+    ::= { cryptoPortStatusEntry 1 }
+
+cryptoPortStatusEncryptionOffTimeRemaining OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about amount of minutes remaining to restore traffic encryption."
+    ::= { cryptoPortStatusEntry 2 }
+
+cryptoPortStatusFailureKeyExchangeCount OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3 | 4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Numbers of unsuccessful encryption key exchanges since the successful one."
+    ::= { cryptoPortStatusEntry 3 }
+
+cryptoPortStatusSuccessfulKeyExchangeDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a recent successful encryption key exchange."
+    ::= { cryptoPortStatusEntry 4 }
+
+cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a recent unsuccessful encryption key exchange."
+    ::= { cryptoPortStatusEntry 5 }
+
+cryptoPortStatusAuthKeyLifeTimeRemaining OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting."
+    ::= { cryptoPortStatusEntry 6 }
+
+cryptoPortStatusEncryptionOffCapability OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Capability for encryption switch."
+    ::= { cryptoPortStatusEntry 7 }
+
+
+--    five index scheme port encryption 
+
+cryptoPortTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoPortEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related parameters defined per port."
+    ::= { portEncryptionObjects 20 }
+
+cryptoPortEntry OBJECT-TYPE
+    SYNTAX        CryptoPortEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable port."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName
+                }
+    ::= { cryptoPortTable 1 }
+
+CryptoPortEntry ::= SEQUENCE
+  {    cryptoPortAuthKey SnmpAdminString,
+    cryptoPortAuthKeyLifeTime CryptoFspR7SessionKeyLifetime,
+    cryptoPortEncryptionOffState CryptoFspR7EnableDisable,
+    cryptoPortEncryptionOff CryptoFspR7EncryptionSwitch,
+    cryptoPortForceKeyExchange CryptoFspR7ForceKeyExchange,
+    cryptoPortKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear,
+    cryptoPortEncryptionOffTimeRemaining Unsigned32,
+    cryptoPortFailureKeyExchangeCount Unsigned32,
+    cryptoPortSuccessfulKeyExchangeDateAndTime DateAndTime,
+    cryptoPortUnsuccessfulKeyExchangeDateAndTime DateAndTime,
+    cryptoPortAuthKeyLifeTimeRemaining Unsigned32,
+    cryptoPortTagFailureLimit Unsigned32,
+    cryptoPortTagFailurePeriod Unsigned32,
+    cryptoPortTagReceiveFailures Unsigned32,
+    cryptoPortTagClear CryptoFspR7KeyExchangeForcedClear,
+    cryptoPortEncryptionChannel CryptoFspR7EncryptionCommunication,
+    cryptoPortTagFailTimeExpiration Unsigned32,
+    cryptoPortGenAuthKey FspR7RlsAction,
+    cryptoPortAcceptFpKeyRx FspR7RlsAction,
+    cryptoPortFpKey FspR7SnmpHexString,
+    cryptoPortFpKeyRx FspR7SnmpHexString }
+
+cryptoPortAuthKey OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Encryption password being an input to generate an authentication key used to
+        traffic encryption between ports. This object can be write only. Read attempt
+        will fail with noSuchName error."
+    ::= { cryptoPortEntry 1 }
+
+cryptoPortAuthKeyLifeTime OBJECT-TYPE
+    SYNTAX        CryptoFspR7SessionKeyLifetime
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Determines a life period of an introduced authentication key for a traffic encryption."
+    ::= { cryptoPortEntry 2 }
+
+cryptoPortEncryptionOffState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisable
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Enable/disable possibility of using encryption switch. This is an additional trigger required to
+        make a transition into transparent mode in two steps."
+    ::= { cryptoPortEntry 3 }
+
+cryptoPortEncryptionOff OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionSwitch
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Disable/enable encryption switch."
+    ::= { cryptoPortEntry 4 }
+
+cryptoPortForceKeyExchange OBJECT-TYPE
+    SYNTAX        CryptoFspR7ForceKeyExchange
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Force key exchange."
+    ::= { cryptoPortEntry 5 }
+
+cryptoPortKeyExchangeForcedClear OBJECT-TYPE
+    SYNTAX        CryptoFspR7KeyExchangeForcedClear
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
+    ::= { cryptoPortEntry 6 }
+
+cryptoPortEncryptionOffTimeRemaining OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about amount of minutes remaining to restore traffic encryption."
+    ::= { cryptoPortEntry 7 }
+
+cryptoPortFailureKeyExchangeCount OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3 | 4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Numbers of unsuccessful encryption key exchanges since the successful one."
+    ::= { cryptoPortEntry 8 }
+
+cryptoPortSuccessfulKeyExchangeDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a recent successful encryption key exchange."
+    ::= { cryptoPortEntry 9 }
+
+cryptoPortUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "The date and time of a recent unsuccessful encryption key exchange."
+    ::= { cryptoPortEntry 10 }
+
+cryptoPortAuthKeyLifeTimeRemaining OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting."
+    ::= { cryptoPortEntry 11 }
+
+cryptoPortTagFailureLimit OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..100 | 4294967295)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated"
+    ::= { cryptoPortEntry 12 }
+
+cryptoPortTagFailurePeriod OBJECT-TYPE
+    SYNTAX        Unsigned32 (10..28800 | 4294967295)
+    UNITS         "s"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes"
+    ::= { cryptoPortEntry 13 }
+
+cryptoPortTagReceiveFailures OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3 | 4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Count of Ethernet packets received with a tag error in the specified time window (TAGFAIL-TIMER)"
+    ::= { cryptoPortEntry 14 }
+
+cryptoPortTagClear OBJECT-TYPE
+    SYNTAX        CryptoFspR7KeyExchangeForcedClear
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)"
+    ::= { cryptoPortEntry 15 }
+
+cryptoPortEncryptionChannel OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionCommunication
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Embedded Communication Channel used to support Encryption"
+    ::= { cryptoPortEntry 16 }
+
+cryptoPortTagFailTimeExpiration OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Count down of time window for Ethernet packets with tag errors for alarm purposes"
+    ::= { cryptoPortEntry 17 }
+
+cryptoPortGenAuthKey OBJECT-TYPE
+    SYNTAX        FspR7RlsAction
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Generate new authentication key"
+    ::= { cryptoPortEntry 18 }
+
+cryptoPortAcceptFpKeyRx OBJECT-TYPE
+    SYNTAX        FspR7RlsAction
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION   "Accept Authentication key received from far end"
+    ::= { cryptoPortEntry 19 }
+
+cryptoPortFpKey OBJECT-TYPE
+    SYNTAX        FspR7SnmpHexString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Authentication Key"
+    ::= { cryptoPortEntry 20 }
+
+cryptoPortFpKeyRx OBJECT-TYPE
+    SYNTAX        FspR7SnmpHexString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Authentication key received from the far end"
+    ::= { cryptoPortEntry 21 }
+
+cryptoPortCapTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoPortCapEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related parameters defined per port."
+    ::= { portEncryptionObjects 21 }
+
+cryptoPortCapEntry OBJECT-TYPE
+    SYNTAX        CryptoPortCapEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents an encryption-capable port."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName
+                }
+    ::= { cryptoPortCapTable 1 }
+
+CryptoPortCapEntry ::= SEQUENCE
+  {    cryptoPortCapAuthKey Integer32,
+    cryptoPortCapAuthKeyLifeTime CryptoFspR7SessionKeyLifetimeCaps,
+    cryptoPortCapEncryptionOffState CryptoFspR7EnableDisableCaps,
+    cryptoPortCapEncryptionOff CryptoFspR7EncryptionSwitchCaps,
+    cryptoPortCapForceKeyExchange CryptoFspR7ForceKeyExchangeCaps,
+    cryptoPortCapKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClearCaps,
+    cryptoPortCapTagFailureLimit FspR7Unsigned32Caps,
+    cryptoPortCapTagFailurePeriod FspR7Unsigned32Caps,
+    cryptoPortCapTagClear CryptoFspR7KeyExchangeForcedClearCaps,
+    cryptoPortCapEncryptionChannel CryptoFspR7EncryptionCommunicationCaps,
+    cryptoPortCapGenAuthKey FspR7RlsActionCaps,
+    cryptoPortCapAcceptAuthRxKey FspR7RlsActionCaps }
+
+cryptoPortCapAuthKey OBJECT-TYPE
+    SYNTAX        Integer32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption password being an input to generate an authentication key used to
+        traffic encryption between ports. This object can be write only. Read attempt
+        will fail with noSuchName error."
+    ::= { cryptoPortCapEntry 1 }
+
+cryptoPortCapAuthKeyLifeTime OBJECT-TYPE
+    SYNTAX        CryptoFspR7SessionKeyLifetimeCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Determines a life period of an introduced authentication key for a traffic encryption."
+    ::= { cryptoPortCapEntry 2 }
+
+cryptoPortCapEncryptionOffState OBJECT-TYPE
+    SYNTAX        CryptoFspR7EnableDisableCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Enable/disable possibility of using encryption switch. This is an additional trigger required to
+        make a transition into transparent mode in two steps."
+    ::= { cryptoPortCapEntry 3 }
+
+cryptoPortCapEncryptionOff OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionSwitchCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Disable/enable encryption switch."
+    ::= { cryptoPortCapEntry 4 }
+
+cryptoPortCapForceKeyExchange OBJECT-TYPE
+    SYNTAX        CryptoFspR7ForceKeyExchangeCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Force key exchange."
+    ::= { cryptoPortCapEntry 5 }
+
+cryptoPortCapKeyExchangeForcedClear OBJECT-TYPE
+    SYNTAX        CryptoFspR7KeyExchangeForcedClearCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
+    ::= { cryptoPortCapEntry 6 }
+
+cryptoPortCapTagFailureLimit OBJECT-TYPE
+    SYNTAX        FspR7Unsigned32Caps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated"
+    ::= { cryptoPortCapEntry 7 }
+
+cryptoPortCapTagFailurePeriod OBJECT-TYPE
+    SYNTAX        FspR7Unsigned32Caps
+    UNITS         "s"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes"
+    ::= { cryptoPortCapEntry 8 }
+
+cryptoPortCapTagClear OBJECT-TYPE
+    SYNTAX        CryptoFspR7KeyExchangeForcedClearCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)"
+    ::= { cryptoPortCapEntry 9 }
+
+cryptoPortCapEncryptionChannel OBJECT-TYPE
+    SYNTAX        CryptoFspR7EncryptionCommunicationCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Embedded Communication Channel used to support Encryption"
+    ::= { cryptoPortCapEntry 10 }
+
+cryptoPortCapGenAuthKey OBJECT-TYPE
+    SYNTAX        FspR7RlsActionCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Generate new authentication key"
+    ::= { cryptoPortCapEntry 11 }
+
+cryptoPortCapAcceptAuthRxKey OBJECT-TYPE
+    SYNTAX        FspR7RlsActionCaps
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Accept Authentication key received from far end"
+    ::= { cryptoPortCapEntry 12 }
+
+
+--    performance monitoring of an encrypted port
+
+intervalEncryptionSublayerPm15minTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IntervalEncryptionSublayerPm15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains encryption-related performance monitoring 15-min
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 1 }
+
+intervalEncryptionSublayerPm15minEntry OBJECT-TYPE
+    SYNTAX        IntervalEncryptionSublayerPm15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityIndex,
+                  intervalEncryptionSublayerPm15minNumber
+                }
+    ::= { intervalEncryptionSublayerPm15minTable 1 }
+
+IntervalEncryptionSublayerPm15minEntry ::= SEQUENCE
+  {    intervalEncryptionSublayerPm15minNumber Integer32,
+    intervalEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32,
+    intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32,
+    intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32,
+    intervalEncryptionSublayerPm15minValidFlag TruthValue,
+    intervalEncryptionSublayerPm15minTimeStamp DateAndTime }
+
+intervalEncryptionSublayerPm15minNumber OBJECT-TYPE
+    SYNTAX        Integer32 (1..96)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "A number between 1 and 96, which identifies the interval for
+        which the set of statistics is available. The interval
+        identified by 1 is the most recently completed 15 minute
+        interval, and the interval identified by N is the interval
+        immediately preceding the one identified by N-1."
+    ::= { intervalEncryptionSublayerPm15minEntry 1 }
+
+intervalEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm15minEntry 2 }
+
+intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about errorous time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm15minEntry 3 }
+
+intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about degraded time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm15minEntry 4 }
+
+intervalEncryptionSublayerPm15minValidFlag OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Valid Flag"
+    ::= { intervalEncryptionSublayerPm15minEntry 5 }
+
+intervalEncryptionSublayerPm15minTimeStamp OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Timestamp"
+    ::= { intervalEncryptionSublayerPm15minEntry 6 }
+
+intervalEncryptionSublayerPm1dayTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IntervalEncryptionSublayerPm1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains interval encryption-related performance monitoring 15-min
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 2 }
+
+intervalEncryptionSublayerPm1dayEntry OBJECT-TYPE
+    SYNTAX        IntervalEncryptionSublayerPm1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityIndex,
+                  intervalEncryptionSublayerPm1dayNumber
+                }
+    ::= { intervalEncryptionSublayerPm1dayTable 1 }
+
+IntervalEncryptionSublayerPm1dayEntry ::= SEQUENCE
+  {    intervalEncryptionSublayerPm1dayNumber Integer32,
+    intervalEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32,
+    intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32,
+    intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32,
+    intervalEncryptionSublayerPm1dayValidFlag TruthValue,
+    intervalEncryptionSublayerPm1dayTimeStamp DateAndTime }
+
+intervalEncryptionSublayerPm1dayNumber OBJECT-TYPE
+    SYNTAX        Integer32 (1..31)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "A number, which identifies the interval for
+        which the set of statistics is available. The interval
+        identified by 1 is the most recently completed 1 day
+        interval."
+    ::= { intervalEncryptionSublayerPm1dayEntry 1 }
+
+intervalEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm1dayEntry 2 }
+
+intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about errorous time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm1dayEntry 3 }
+
+intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about degraded time period (seconds) during encryption mode."
+    ::= { intervalEncryptionSublayerPm1dayEntry 4 }
+
+intervalEncryptionSublayerPm1dayValidFlag OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Valid Flag"
+    ::= { intervalEncryptionSublayerPm1dayEntry 5 }
+
+intervalEncryptionSublayerPm1dayTimeStamp OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Timestamp"
+    ::= { intervalEncryptionSublayerPm1dayEntry 6 }
+
+currentEncryptionSublayerPm15minTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CurrentEncryptionSublayerPm15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains current encryption-related performance monitoring 15-min
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 3 }
+
+currentEncryptionSublayerPm15minEntry OBJECT-TYPE
+    SYNTAX        CurrentEncryptionSublayerPm15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityIndex
+                }
+    ::= { currentEncryptionSublayerPm15minTable 1 }
+
+CurrentEncryptionSublayerPm15minEntry ::= SEQUENCE
+  {    currentEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32,
+    currentEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32,
+    currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32,
+    currentEncryptionSublayerPm15minElapsedTime Integer32 }
+
+currentEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption running seconds"
+    ::= { currentEncryptionSublayerPm15minEntry 1 }
+
+currentEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption Errored Seconds"
+    ::= { currentEncryptionSublayerPm15minEntry 2 }
+
+currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption in degrade mode seconds"
+    ::= { currentEncryptionSublayerPm15minEntry 3 }
+
+currentEncryptionSublayerPm15minElapsedTime OBJECT-TYPE
+    SYNTAX        Integer32 (0..9000 | -2147483648)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Elapsed 15Min"
+    ::= { currentEncryptionSublayerPm15minEntry 4 }
+
+currentEncryptionSublayerPm1dayTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CurrentEncryptionSublayerPm1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains current encryption-related performance monitoring 1-day
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 4 }
+
+currentEncryptionSublayerPm1dayEntry OBJECT-TYPE
+    SYNTAX        CurrentEncryptionSublayerPm1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityIndex
+                }
+    ::= { currentEncryptionSublayerPm1dayTable 1 }
+
+CurrentEncryptionSublayerPm1dayEntry ::= SEQUENCE
+  {    currentEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32,
+    currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32,
+    currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32,
+    currentEncryptionSublayerPm1dayElapsedTime Integer32 }
+
+currentEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption running seconds"
+    ::= { currentEncryptionSublayerPm1dayEntry 1 }
+
+currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption Errored Seconds"
+    ::= { currentEncryptionSublayerPm1dayEntry 2 }
+
+currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption in degrade mode seconds"
+    ::= { currentEncryptionSublayerPm1dayEntry 3 }
+
+currentEncryptionSublayerPm1dayElapsedTime OBJECT-TYPE
+    SYNTAX        Integer32 (0..86400 | -2147483648)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Elapsed 1Day"
+    ::= { currentEncryptionSublayerPm1dayEntry 4 }
+
+
+--    five index scheme performance monitoring of an encrypted port 
+
+cryFacilityCurrent15minTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryFacilityCurrent15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains current encryption-related performance monitoring 15-min
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 10 }
+
+cryFacilityCurrent15minEntry OBJECT-TYPE
+    SYNTAX        CryFacilityCurrent15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName
+                }
+    ::= { cryFacilityCurrent15minTable 1 }
+
+CryFacilityCurrent15minEntry ::= SEQUENCE
+  {    cryFacilityCurrent15minEncryptionRunSeconds Unsigned32,
+    cryFacilityCurrent15minEncryptionRunErrorSeconds Unsigned32,
+    cryFacilityCurrent15minEncryptionRunDegradeSeconds Unsigned32,
+    cryFacilityCurrent15minElapsedTime Integer32 }
+
+cryFacilityCurrent15minEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption running seconds"
+    ::= { cryFacilityCurrent15minEntry 1 }
+
+cryFacilityCurrent15minEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption Errored Seconds"
+    ::= { cryFacilityCurrent15minEntry 2 }
+
+cryFacilityCurrent15minEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption in degrade mode seconds"
+    ::= { cryFacilityCurrent15minEntry 3 }
+
+cryFacilityCurrent15minElapsedTime OBJECT-TYPE
+    SYNTAX        Integer32 (0..9000 | -2147483648)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Elapsed 15Min"
+    ::= { cryFacilityCurrent15minEntry 4 }
+
+cryFacilityCurrent1dayTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryFacilityCurrent1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains current encryption-related performance monitoring 1-day
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 11 }
+
+cryFacilityCurrent1dayEntry OBJECT-TYPE
+    SYNTAX        CryFacilityCurrent1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName
+                }
+    ::= { cryFacilityCurrent1dayTable 1 }
+
+CryFacilityCurrent1dayEntry ::= SEQUENCE
+  {    cryFacilityCurrent1dayEncryptionRunSeconds Unsigned32,
+    cryFacilityCurrent1dayEncryptionRunErrorSeconds Unsigned32,
+    cryFacilityCurrent1dayEncryptionRunDegradeSeconds Unsigned32,
+    cryFacilityCurrent1dayElapsedTime Integer32 }
+
+cryFacilityCurrent1dayEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption running seconds"
+    ::= { cryFacilityCurrent1dayEntry 1 }
+
+cryFacilityCurrent1dayEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption Errored Seconds"
+    ::= { cryFacilityCurrent1dayEntry 2 }
+
+cryFacilityCurrent1dayEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Encryption in degrade mode seconds"
+    ::= { cryFacilityCurrent1dayEntry 3 }
+
+cryFacilityCurrent1dayElapsedTime OBJECT-TYPE
+    SYNTAX        Integer32 (0..86400 | -2147483648)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Elapsed 1Day"
+    ::= { cryFacilityCurrent1dayEntry 4 }
+
+cryFacilityHistorical15minTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryFacilityHistorical15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains historical encryption-related performance monitoring 15-min
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 12 }
+
+cryFacilityHistorical15minEntry OBJECT-TYPE
+    SYNTAX        CryFacilityHistorical15minEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName,
+                  cryFacilityHistorical15minNumber
+                }
+    ::= { cryFacilityHistorical15minTable 1 }
+
+CryFacilityHistorical15minEntry ::= SEQUENCE
+  {    cryFacilityHistorical15minNumber Integer32,
+    cryFacilityHistorical15minEncryptionRunSeconds Unsigned32,
+    cryFacilityHistorical15minEncryptionRunErrorSeconds Unsigned32,
+    cryFacilityHistorical15minEncryptionRunDegradeSeconds Unsigned32,
+    cryFacilityHistorical15minValidFlag TruthValue,
+    cryFacilityHistorical15minTimeStamp DateAndTime }
+
+cryFacilityHistorical15minNumber OBJECT-TYPE
+    SYNTAX        Integer32 (1..96)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "A number between 1 and 96, which identifies the interval for
+        which the set of statistics is available. The interval
+        identified by 1 is the most recently completed 15 minute
+        interval, and the interval identified by N is the interval
+        immediately preceding the one identified by N-1."
+    ::= { cryFacilityHistorical15minEntry 1 }
+
+cryFacilityHistorical15minEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical15minEntry 2 }
+
+cryFacilityHistorical15minEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about errorous time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical15minEntry 3 }
+
+cryFacilityHistorical15minEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about degraded time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical15minEntry 4 }
+
+cryFacilityHistorical15minValidFlag OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Valid Flag"
+    ::= { cryFacilityHistorical15minEntry 5 }
+
+cryFacilityHistorical15minTimeStamp OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Timestamp"
+    ::= { cryFacilityHistorical15minEntry 6 }
+
+cryFacilityHistorical1dayTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryFacilityHistorical1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table contains historical encryption-related performance monitoring 1-day
+        values related to channel ports."
+    ::= { encryptionPerformanceMonitoring 13 }
+
+cryFacilityHistorical1dayEntry OBJECT-TYPE
+    SYNTAX        CryFacilityHistorical1dayEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Every row of this table represents performance monitoring entry."
+    INDEX       {
+                  entityFacilityShelfNo,
+                  entityFacilitySlotNo,
+                  entityFacilityPortNo,
+                  entityFacilityExtNo,
+                  entityFacilityClassName,
+                  cryFacilityHistorical1dayNumber
+                }
+    ::= { cryFacilityHistorical1dayTable 1 }
+
+CryFacilityHistorical1dayEntry ::= SEQUENCE
+  {    cryFacilityHistorical1dayNumber Integer32,
+    cryFacilityHistorical1dayEncryptionRunSeconds Unsigned32,
+    cryFacilityHistorical1dayEncryptionRunErrorSeconds Unsigned32,
+    cryFacilityHistorical1dayEncryptionRunDegradeSeconds Unsigned32,
+    cryFacilityHistorical1dayValidFlag TruthValue,
+    cryFacilityHistorical1dayTimeStamp DateAndTime }
+
+cryFacilityHistorical1dayNumber OBJECT-TYPE
+    SYNTAX        Integer32 (1..31)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "A number, which identifies the interval for
+        which the set of statistics is available. The interval
+        identified by 1 is the most recently completed 1 day
+        interval."
+    ::= { cryFacilityHistorical1dayEntry 1 }
+
+cryFacilityHistorical1dayEncryptionRunSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical1dayEntry 2 }
+
+cryFacilityHistorical1dayEncryptionRunErrorSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about errorous time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical1dayEntry 3 }
+
+cryFacilityHistorical1dayEncryptionRunDegradeSeconds OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Informs about degraded time period (seconds) during encryption mode."
+    ::= { cryFacilityHistorical1dayEntry 4 }
+
+cryFacilityHistorical1dayValidFlag OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Valid Flag"
+    ::= { cryFacilityHistorical1dayEntry 5 }
+
+cryFacilityHistorical1dayTimeStamp OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Timestamp"
+    ::= { cryFacilityHistorical1dayEntry 6 }
+
+cryptoRequestErrorTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF CryptoRequestErrorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "This table shows a list of last 100 snmpset requests which failed."
+    ::= { encryptionDiagnostics 1 }
+
+cryptoRequestErrorEntry OBJECT-TYPE
+    SYNTAX        CryptoRequestErrorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION   "Entry of cryptoRequestError"
+    INDEX       {
+                  cryptoRequestErrorId
+                }
+    ::= { cryptoRequestErrorTable 1 }
+
+CryptoRequestErrorEntry ::= SEQUENCE
+  {    cryptoRequestErrorId Unsigned32,
+    cryptoRequestErrorType FspR7RequestErrorType,
+    cryptoRequestErrorAesSpecific FspR7RequestErrorTypeAes,
+    cryptoRequestErrorTimeStamp DateAndTime }
+
+cryptoRequestErrorId OBJECT-TYPE
+    SYNTAX        Unsigned32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Request ID"
+    ::= { cryptoRequestErrorEntry 1 }
+
+cryptoRequestErrorType OBJECT-TYPE
+    SYNTAX        FspR7RequestErrorType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Generic error code"
+    ::= { cryptoRequestErrorEntry 2 }
+
+cryptoRequestErrorAesSpecific OBJECT-TYPE
+    SYNTAX        FspR7RequestErrorTypeAes
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Specific error code for Encryption Module"
+    ::= { cryptoRequestErrorEntry 3 }
+
+cryptoRequestErrorTimeStamp OBJECT-TYPE
+    SYNTAX        DateAndTime
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION   "Timestamp"
+    ::= { cryptoRequestErrorEntry 4 }
+
+
+END