diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB')
| -rw-r--r-- | MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB | 2235 |
1 files changed, 2235 insertions, 0 deletions
diff --git a/MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB b/MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB new file mode 100644 index 0000000..4f6ff10 --- /dev/null +++ b/MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB @@ -0,0 +1,2235 @@ +
+CADANT-CMTS-EQUIPMENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ cadEquipment
+ FROM CADANT-PRODUCTS-MIB
+ AdminState,
+ CardId,
+ CardSubType,
+ CardType,
+ DiskVolumeUsageLevel,
+ DuplexStatus,
+ EqActionType,
+ FirmwareSource,
+ FlowControlMode,
+ PicType,
+ PortId,
+ PortMode,
+ PortDetectedMode,
+ PortType,
+ PrimaryState,
+ SecondaryState,
+ ShelfId,
+ UnknownState
+ FROM CADANT-TC
+ TenthdBmV
+ FROM DOCS-IF-MIB
+ InterfaceIndexOrZero
+ FROM IF-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ Counter32,
+ Integer32,
+ MODULE-IDENTITY,
+ NOTIFICATION-TYPE,
+ OBJECT-TYPE,
+ TimeTicks,
+ IpAddress,
+ Unsigned32
+ FROM SNMPv2-SMI
+ DateAndTime,
+ DisplayString,
+ MacAddress,
+ RowStatus,
+ TEXTUAL-CONVENTION,
+ TimeStamp,
+ TruthValue
+ FROM SNMPv2-TC;
+
+cadEquipmentMib MODULE-IDENTITY
+ LAST-UPDATED "200903030000Z" -- March 3, 2009
+ ORGANIZATION
+ "Arris International, Inc."
+ CONTACT-INFO
+ "Arris Technical Support
+ Phone: +1 630 281 3000
+ E-Mail: support@arrisi.com"
+ DESCRIPTION
+ "This MIB is intended to describe all objects which are used to
+ control and report on the state of a Cadant CMTS. These objects
+ are used to perform the following functions on a Cadant CMTS:
+
+ a) provision the cards, ports, and the CMTS itself
+ b) run dianostic tests
+ c) configure auditing parameters
+ d) receive equipment-related traps "
+ REVISION "200903030000Z" -- March 3, 2009
+ DESCRIPTION
+ "Change syntax of cmIpAddress from IpAddress to OCTET STRING to handle IPv4 and v6."
+ REVISION "200901050000Z" -- January 5, 2009
+ DESCRIPTION
+ "Add restrictions on the size of some strings in card table."
+ REVISION "200810140000Z" -- October 14, 2008
+ DESCRIPTION
+ "Add shelf id back into trap messages."
+ REVISION "200810010000Z" -- October 1, 2008
+ DESCRIPTION
+ "Add ranges for allowable card temperatures."
+ REVISION "200807030000Z" -- July 3, 2008
+ DESCRIPTION
+ "Remove portGroupId since cable-mac replaced this MIB object.
+ Add shelfNumber to portPrStateChange, portSecStateChange and portDplxStatusChange to match the variable binding list seen on trap monitor."
+ REVISION "200806180000Z" -- June 18, 2008
+ DESCRIPTION
+ "Additional support for disk sizes."
+ REVISION "200804280000Z" -- April 28, 2008
+ DESCRIPTION
+ "Initial support for MPM carrier cards."
+ REVISION "200804020000Z" -- April 2, 2008
+ DESCRIPTION
+ "Support various levels of temperature warnings."
+ REVISION "200802250000Z" -- Feb 25, 2008
+ DESCRIPTION
+ "Allowed Event Ids to range 0x00000000 to 0xFFFFFFFF for fpgaErrorEvent Table."
+ REVISION "200711050000Z" -- Nov 5, 2007
+ DESCRIPTION
+ "Add port flow control parameters and remove gbic support."
+ REVISION "200701100000Z" -- Jan 10, 2007
+ DESCRIPTION
+ "Remove cardSwBuildTime"
+ REVISION "200611130000Z" -- Nov 13, 2006
+ DESCRIPTION
+ "Remove portMacPortId"
+ REVISION "200609120000Z" -- Sep 12, 2006
+ DESCRIPTION
+ "Change syntax of portMacPortId from MacPortId to MacPortIdWithInvalid (65536 is invalid)"
+ REVISION "200608230000Z" -- Aug 23, 2006
+ DESCRIPTION
+ "Add portMacPortId"
+ REVISION "200602140000Z"
+ DESCRIPTION
+ "Add additional variable-binding cmIpAddress cmRegistrationNotification"
+ REVISION "200508300000Z"
+ DESCRIPTION
+ "Add support for RCM module."
+ REVISION "200504060000Z"
+ DESCRIPTION
+ "Add support for CM registration notification"
+ REVISION "200502040000Z"
+ DESCRIPTION
+ "Add downstream power loss notification."
+ REVISION "200501240000Z"
+ DESCRIPTION
+ "Add last card reset reason to card table."
+ REVISION "200412010000Z"
+ DESCRIPTION
+ "Add downstream power visibility to port table."
+ REVISION "200411180000Z"
+ DESCRIPTION
+ "(1) Add 2 additional variable-bindings to cmResetClearNotification.
+ (2) Add 1 additional variable-binding to cmResetNotification."
+ REVISION "200411110000Z"
+ DESCRIPTION
+ "Add preliminary support for customized FPGA error event handling."
+ REVISION "200409070000Z"
+ DESCRIPTION
+ "Add cardSubType, portGroupId and portDocsIfIndex to C4 Port Primary
+ and Secondary Trap."
+ REVISION "200407230000Z"
+ DESCRIPTION
+ "(1) Modify the TEXTUAL-CONVENTION of TestId.
+ (2) Add diagTestId for cardTestResultNotification."
+ REVISION "200403220000Z"
+ DESCRIPTION
+ "Added portDescription."
+ REVISION "200403180000Z"
+ DESCRIPTION
+ "(1) Add support for card temperature trap control.
+ (2) Fix smidump error by changing diskVolumeFileName object mibtree"
+ REVISION "200402040000Z"
+ DESCRIPTION
+ "Add CmResetClear notification."
+ REVISION "200312180000Z"
+ DESCRIPTION
+ "Add support for logical uchannel port type and
+ preliminary support for extended gbic information."
+ REVISION "200303310000Z"
+ DESCRIPTION
+ "Add preliminary pic support."
+ REVISION "200303170000Z"
+ DESCRIPTION
+ "Add card detail support."
+ REVISION "200303050000Z"
+ DESCRIPTION
+ "Replacing portGroupId with portCardSubType and renaming portDPortId to portGroupId."
+ REVISION "200303020000Z"
+ DESCRIPTION
+ "Add card temperature monitoring."
+ REVISION "200301290000Z"
+ DESCRIPTION
+ "Adding portDPortId and portConnectorId objects to portTable to support 2D12U CAM."
+ REVISION "200212140000Z"
+ DESCRIPTION
+ "Revise audit entries. Add auditAutoScheduling and auditLogOutput control.
+ Remove auditResultNotification"
+ REVISION "200211070000Z"
+ DESCRIPTION
+ "Add support for diskVolume"
+ REVISION "200209250000Z"
+ DESCRIPTION
+ "Undo previous change."
+ REVISION "200209010000Z"
+ DESCRIPTION
+ "Make cardsubtype backward compatible."
+ REVISION "200205010000Z"
+ DESCRIPTION
+ "Add support for cardFpgaToCpuSendRate."
+ REVISION "200112281630Z"
+ DESCRIPTION
+ "Add support for cardSwBuildTime."
+ REVISION "200112211630Z"
+ DESCRIPTION
+ "Add support for cardUpTime."
+ REVISION "200110030000Z"
+ DESCRIPTION
+ "Add support for card detected trap."
+ REVISION "200107170000Z"
+ DESCRIPTION
+ "Add support for card sparing."
+
+ ::= { cadEquipment 1 }
+
+
+TestId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " Used as index to Test Tables. "
+ SYNTAX Integer32 (1..100)
+
+TestType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " Indicates whether this is a 'Test', a 'Diagnostic',
+ or unknown. "
+ SYNTAX INTEGER {
+ test(1),
+ diagnostic(2),
+ unknown(3)
+ }
+
+TestCommand ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " A set of commands applicable to this test. A value of
+ noop will do nothing. "
+ SYNTAX INTEGER {
+ noop(1),
+ stop(2),
+ disable(3),
+ enable(4),
+ runNow(5)
+ }
+
+TestScheduleCommand ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " A set of periodic schedule command applicable to
+ this test. This is used in conjunction with the
+ TestSchedule and TestTime to specify the start
+ time of the test. If the TestSchedule value is 0,
+ then the test will be executed once at the time
+ specified by the TestTime. For any other
+ TestSchedule value, the test will be executed at
+ time specified by the TestTime and repeated
+ periodically base on the value specified by
+ TestSchedule. A value of noop will do nothing. "
+ SYNTAX INTEGER {
+ noop(1),
+ disable(2),
+ enable(3)
+ }
+
+TestSchedule ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " A set of scheduling interval option applicable to this
+ test only if Schedule is selected. This is recommended for
+ hardware routine exercise (REX). The value expresses in multiple
+ of hours. For example: 1 hour interval, 24 hour interval, 48 hour interval.
+ A value of 0 indicate no scheduling option for this test."
+ SYNTAX Integer32
+
+TestResult ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " Test Result. "
+ SYNTAX INTEGER {
+ notRun(1),
+ inProgress(2),
+ pass(3),
+ fail(4),
+ inconclusive(5),
+ timeOut(6),
+ abort(7)
+ }
+
+TestTransactionId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " Transaction Id associated with a test or diagnostic. The EMS must populate
+ the value of this object to be able to correlate the test sent and the
+ result coming back. "
+ SYNTAX Integer32 (0..2147483647)
+
+equipmentTraps OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 0 }
+
+--
+-- System General Object Group
+--
+systemGeneral OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 1 }
+
+systemClock OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "CMTS local date and time displayed as
+ yyyy-mm-dd,hh:mm:ss.d,+/-hh:mm, where the date is yyyy-mmmm-dd and
+ time in deci-seconds is hh:mm:ss.d, adn teh current offset from
+ GMT is +/-hh:mm. This object is adjusted by teh TZ and DST rules.
+ E.g. 2002-5-26,13;30:15.0,-4:0"
+ ::= { systemGeneral 1 }
+
+trapCounter OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the trap sequence number that increments each
+ time a trap is sent. It is persistent across resets. "
+ ::= { systemGeneral 2 }
+
+trapSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ cleared(1),
+ indeterminate(2),
+ warning(3),
+ minor(4),
+ major(5),
+ critical(6),
+ informational(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Severity level of a Cadant trap. "
+ DEFVAL { cleared }
+ ::= { systemGeneral 3 }
+
+systemKey OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The systemKey is a unique string used for Candant's CMTS
+ identification. The EMS uses this key string as well as the
+ sysOid in the MIB-II system group MIB to identify Candant's
+ CMTS's. "
+ ::= { systemGeneral 4 }
+
+cardNumber OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " Card Id used in traps. A value 99 indicates an invalid cardNumber. "
+ DEFVAL { 99 }
+ ::= { systemGeneral 98 }
+
+portNumber OBJECT-TYPE
+ SYNTAX PortId
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " Port Id used in traps. A value of 99 indicates an invalid portNumber. "
+ DEFVAL { 99 }
+ ::= { systemGeneral 99 }
+
+diskDriveNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..99)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " Disk drive ID use in a Cadant trap. A value of 99 indicates an invalid diskDriveNumber"
+ DEFVAL { 99 }
+ ::= { systemGeneral 100 }
+
+diskVolumeNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..99)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " Disk volume ID use in a Cadant trap. A value of 99 indicates an invalid diskVolumeNumber"
+ DEFVAL { 99 }
+ ::= { systemGeneral 101 }
+
+--
+-- Shelf Object Group
+--
+shelfObjects OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 2 }
+
+shelfNumber OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ " The instance identifier of a Cadant CMTS in a multi-Cadant CMTS
+ configuration. This shelfNumber is used in traps. A value of 99
+ indicates an invalid shelfNumber. "
+ DEFVAL { 1 }
+ ::= { shelfObjects 1 }
+
+shelfName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " A string that represents the name of this machine and may uniquely
+ identify it from other network devices. "
+ DEFVAL { "Cadant C4 CMTS" }
+ ::= { shelfObjects 2 }
+
+shelfSwVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The software version currently executing."
+ ::= { shelfObjects 3 }
+
+--
+-- Equipment State Object Group
+--
+equipmentState OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 3 }
+
+cardLastChangeTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time any of the objects
+ in cardTable last changed. "
+ ::= { equipmentState 2 }
+
+portLastChangeTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time any of the objects
+ in portTable last changed. "
+ ::= { equipmentState 3 }
+
+--
+-- Equipment Tables (cards and ports)
+--
+equipmentTbl OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 4 }
+
+--
+-- Card table
+--
+cardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of card or circuit pack information."
+ ::= { equipmentTbl 2 }
+
+cardEntry OBJECT-TYPE
+ SYNTAX CardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing pertinent information about a card or
+ a circuit pack. "
+ INDEX { cardShelfId, cardId }
+ ::= { cardTable 1 }
+
+CardEntry ::= SEQUENCE {
+ cardShelfId ShelfId,
+ cardId CardId,
+ cardName DisplayString,
+ cardType CardType,
+ cardSubType CardSubType,
+ cardSerialNum DisplayString,
+ cardFwVersion DisplayString,
+ cardHwVersion DisplayString,
+ cardSwVersion DisplayString,
+ cardAdminState AdminState,
+ cardPrState PrimaryState,
+ cardSecState SecondaryState,
+ cardDplxStatus DuplexStatus,
+ cardAction EqActionType,
+ cardTrapInh BITS,
+ cardNumPorts Integer32,
+ cardDetected CardType,
+ cardSubDetected CardSubType,
+ cardFwUpdateStatus TruthValue,
+ cardSpareGroupId CardId,
+ cardSpareGroupMode INTEGER,
+ cardUpTime TimeTicks,
+ cardTemperature Integer32,
+ cardCpuType DisplayString,
+ cardCpuSpeed Unsigned32,
+ cardBusSpeed Unsigned32,
+ cardRamSize Unsigned32,
+ cardFlashSize Unsigned32,
+ cardCPLDVersion DisplayString,
+ cardFpgaSource FirmwareSource,
+ cardBootVersion DisplayString,
+ cardLastBootVersion DisplayString,
+ cardLastBootSource FirmwareSource,
+ cardPicDetected PicType,
+ cardPicSerialNum DisplayString,
+ cardPicHwVersion DisplayString,
+ cardLastResetReason DisplayString,
+ cardTemperatureHighWarn Integer32,
+ cardTemperatureHighError Integer32,
+ cardCarrierSerialNum DisplayString,
+ cardCarrierFwVersion DisplayString,
+ cardCarrierHwVersion DisplayString
+ }
+
+cardShelfId OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The unique id the shelf that contains this card."
+ ::= { cardEntry 1 }
+
+cardId OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of this card within the shelf. The
+ convention of cardId is as follows:
+ - Indices from 1 to 50 [1 - 50] are reserved for Circuit Packs.
+ In this case, the cardId is 1 plus the 0-based slot number.
+ - Indices from 51 to 98 [51 - 98] are reserved for Auxilliary Devices in within
+ a shelf. Auxilliary Devices or Modules could be Fan Module, Power Module,
+ Tape Drive and or Disc-Drive. In this case, the cardName and cardType
+ indentify the Auxilliary Devices. Not all of row attributes are applicable
+ for Auxilliary Devices. "
+ ::= { cardEntry 2 }
+
+cardName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " This is the name of the card, if it has one. "
+ ::= { cardEntry 3 }
+
+cardType OBJECT-TYPE
+ SYNTAX CardType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The type of card, if any. For example Ecard, Fcard, Dcard or Ucard
+ If the slot is empty, the value would be 'empty'. "
+ ::= { cardEntry 4 }
+
+cardSubType OBJECT-TYPE
+ SYNTAX CardSubType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The cardType alone may not be specific enough to fully describe the
+ type of card that is in this slot. For example, a card type of Dcard
+ might have a more specific type of 1D8U with integrated upconverter.
+ If the card needs no further specificication that the cardType, then
+ the value of cardSubType is 'none'. Not yet implemented. "
+ ::= { cardEntry 5 }
+
+cardSerialNum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the serial number of the card. "
+ ::= { cardEntry 6 }
+
+cardFwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the firmware or FPGA version number of the card. "
+ ::= { cardEntry 7 }
+
+cardHwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the hardware version of the card. "
+ ::= { cardEntry 8 }
+
+cardSwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the software version of the card. "
+ ::= { cardEntry 9 }
+
+cardAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " This is the administrative state of this card. "
+ ::= { cardEntry 12 }
+
+cardPrState OBJECT-TYPE
+ SYNTAX PrimaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the primary state of this card. "
+ ::= { cardEntry 13 }
+
+cardSecState OBJECT-TYPE
+ SYNTAX SecondaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the secondary state of this card. "
+ ::= { cardEntry 14 }
+
+cardDplxStatus OBJECT-TYPE
+ SYNTAX DuplexStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the duplexing status of this card. "
+ ::= { cardEntry 15 }
+
+cardAction OBJECT-TYPE
+ SYNTAX EqActionType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Write-only action performed on this card. "
+ ::= { cardEntry 17 }
+
+cardTrapInh OBJECT-TYPE
+ SYNTAX BITS { primary(0), secondary(1), duplex(2), detected(3),
+ tempoutofrange(4), tempnoreport(5), tempoverheat(6) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " If a bit is set, the corresponding state change trap
+ will not be sent. "
+ ::= { cardEntry 18 }
+
+cardNumPorts OBJECT-TYPE
+ SYNTAX Integer32 (0..50)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of ports this card contains. "
+ ::= { cardEntry 19 }
+
+cardDetected OBJECT-TYPE
+ SYNTAX CardType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " CardType dectected automatically by the CMTS. "
+ ::= { cardEntry 20 }
+
+cardSubDetected OBJECT-TYPE
+ SYNTAX CardSubType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " CardSubType dectected automatically by the CMTS. "
+ ::= { cardEntry 21 }
+
+cardFwUpdateStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Set to TRUE if a firmware update is in progress or has been done,
+ else set to FALSE. "
+ DEFVAL { false }
+ ::= { cardEntry 23 }
+
+cardSpareGroupId OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The cardId of the spare group leader for this sparing group.
+ This value will be set to the invalid card id for all cards not
+ associated with a sparing group. "
+ ::= { cardEntry 24 }
+
+cardSpareGroupMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ manual(1),
+ auto(2),
+ invalid(99)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The admin mode of the spare group leader for this sparing group.
+ This value will be set to the invalid card id for all cards not
+ associated with a sparing group. "
+ ::= { cardEntry 25 }
+
+cardUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The value of sysUpTime when the primary state for this card
+ made a transition from OOS to IS. "
+ ::= { cardEntry 26 }
+
+cardTemperature OBJECT-TYPE
+ SYNTAX Integer32 (-30..120|999)
+ UNITS "degrees Centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current operational temperature of the card. "
+ DEFVAL { 999 }
+ ::= { cardEntry 29 }
+
+cardCpuType OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..25))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current CPU type of the card. "
+ ::= { cardEntry 30 }
+
+cardCpuSpeed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "MHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current CPU speed of the card. "
+ ::= { cardEntry 31 }
+
+cardBusSpeed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "hertz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current bus speed of the card. "
+ ::= { cardEntry 32 }
+
+cardRamSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current size of installed RAM of the card. "
+ ::= { cardEntry 33 }
+
+cardFlashSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current size of installed FLASH of the card. "
+ ::= { cardEntry 34 }
+
+cardCPLDVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current version of CPLD installed on the card. "
+ ::= { cardEntry 35 }
+
+cardFpgaSource OBJECT-TYPE
+ SYNTAX FirmwareSource
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The source of the running version of the FPGAs on the card. "
+ DEFVAL { committed }
+ ::= { cardEntry 36 }
+
+cardBootVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..90))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current versions of the boot loaders installed on the card. "
+ ::= { cardEntry 37 }
+
+cardLastBootVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The last version of the boot loader used on the card. "
+ ::= { cardEntry 38 }
+
+cardLastBootSource OBJECT-TYPE
+ SYNTAX FirmwareSource
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The source of the version of the bootloader last
+ used on the card. "
+ DEFVAL { boot1 }
+ ::= { cardEntry 39 }
+
+cardPicDetected OBJECT-TYPE
+ SYNTAX PicType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The type of PIC detected in this slot. "
+ DEFVAL { invalid }
+ ::= { cardEntry 40 }
+
+cardPicSerialNum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the serial number of the PIC. "
+ DEFVAL { "" }
+ ::= { cardEntry 41 }
+
+cardPicHwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the hardware version of the PIC. "
+ DEFVAL { "" }
+ ::= { cardEntry 42 }
+
+cardLastResetReason OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The reason for the latest card recovery. "
+ DEFVAL { "" }
+ ::= { cardEntry 43 }
+
+cardTemperatureHighWarn OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "degrees Centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The temperature of the card at which warnings are generated. "
+ DEFVAL { 70 }
+ ::= { cardEntry 44 }
+
+cardTemperatureHighError OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "degrees Centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The temperature of the card at which recoveries are initiated. "
+ DEFVAL { 90 }
+ ::= { cardEntry 45 }
+
+cardCarrierSerialNum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the serial number of the carrier card, and valid only for DMM/MPM cards. "
+ DEFVAL { "" }
+ ::= { cardEntry 46 }
+
+cardCarrierFwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the firmware version of the carrier card, and valid only for DMM/MPM cards. "
+ DEFVAL { "" }
+ ::= { cardEntry 47 }
+
+cardCarrierHwVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This is the hardwarer versioin of the carrier card, and valid only for DMM/MPM cards. "
+ DEFVAL { "" }
+ ::= { cardEntry 48 }
+
+--
+-- Port table
+--
+portTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of Ports information."
+ ::= { equipmentTbl 3 }
+
+portEntry OBJECT-TYPE
+ SYNTAX PortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing pertinent information about a port
+ owned by a card."
+ INDEX { portShelfId, portCardId, portId }
+ ::= { portTable 1 }
+
+PortEntry ::= SEQUENCE {
+ portShelfId ShelfId,
+ portCardId CardId,
+ portId PortId,
+ portType PortType,
+ portAdminState AdminState,
+ portPrState PrimaryState,
+ portSecState SecondaryState,
+ portDplxStatus DuplexStatus,
+ portAction EqActionType,
+ portTrapInh BITS,
+ portNumChans Integer32,
+ portDocsIfIndex InterfaceIndexOrZero,
+ portMacAddress MacAddress,
+ portMode PortMode,
+ portDetectedMode PortDetectedMode,
+ portBgpId Integer32,
+ portConnectorId PortId,
+ portCardSubType CardSubType,
+ portDescription DisplayString,
+ portCurrDsPower TenthdBmV,
+ portMinDsPower TenthdBmV,
+ portMaxDsPower TenthdBmV,
+ portTxFlowControlMode FlowControlMode,
+ portRxFlowControlMode FlowControlMode,
+ portTxFlowControlDetected FlowControlMode,
+ portRxFlowControlDetected FlowControlMode,
+ portMacIfIndex InterfaceIndexOrZero
+ }
+
+portShelfId OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The unique id of the shelf this port belongs to."
+ ::= { portEntry 1 }
+
+portCardId OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of the card this port belongs to."
+ ::= { portEntry 2 }
+
+portId OBJECT-TYPE
+ SYNTAX PortId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of this port within a card.
+ the shelfId, the cardId and portId uniquely identify a port "
+ ::= { portEntry 3 }
+
+portType OBJECT-TYPE
+ SYNTAX PortType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Type of this port. "
+ ::= { portEntry 4 }
+
+portAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Admin state of this port"
+ ::= { portEntry 6 }
+
+portPrState OBJECT-TYPE
+ SYNTAX PrimaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary state of this port"
+ ::= { portEntry 7 }
+
+portSecState OBJECT-TYPE
+ SYNTAX SecondaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary state of this port"
+ ::= { portEntry 8 }
+
+portDplxStatus OBJECT-TYPE
+ SYNTAX DuplexStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port Duplexing status."
+ ::= { portEntry 9 }
+
+portAction OBJECT-TYPE
+ SYNTAX EqActionType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Write-only action performed on a Port. "
+ ::= { portEntry 11 }
+
+portTrapInh OBJECT-TYPE
+ SYNTAX BITS { primary(0), secondary(1), duplex(2),
+ linkUpLinkDown(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " If a bit is set, the corresponding state change trap
+ will not be sent. "
+ ::= { portEntry 12 }
+
+portNumChans OBJECT-TYPE
+ SYNTAX Integer32 (0..50)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of channels this port contains. "
+ ::= { portEntry 13 }
+
+portDocsIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object is here just in case a Port component does
+ have a one to one correspondent with the IfTable. Example: D card
+ in Cadant's CMTS system contains 8 ports, 1 for downstream channel and
+ up to 3 upstream channels. Each channel will correspond to an ifIndex as
+ specified in the ipcdn-rf-interface-mib. In this case, this object MUST
+ have the same value as of ifIndex. A -1 indicates that this port does not
+ have an association in the Iftable. "
+ ::= { portEntry 14 }
+
+portMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The physical address value for this card. This value is used to
+ populate the ifPhysAddress field in the IfTable and other Tables in docsis RFC MIBs."
+ ::= { portEntry 15 }
+
+portMode OBJECT-TYPE
+ SYNTAX PortMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The desired operating mode of an ethernet port. Not yet implemented. "
+ DEFVAL { autoNegotiate }
+ ::= { portEntry 16 }
+
+portDetectedMode OBJECT-TYPE
+ SYNTAX PortDetectedMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The current operating mode of an ethernet port. "
+ ::= { portEntry 17 }
+
+
+portBgpId OBJECT-TYPE
+ SYNTAX Integer32 (-2147483647..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The bridge group port id for this port. "
+ ::= { portEntry 19 }
+
+portConnectorId OBJECT-TYPE
+ SYNTAX PortId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " For portType = uport, the rear pic connector this port is mapped to.
+ Otherwise, the value of this object is invalid(99). "
+ DEFVAL { 99 }
+ ::= { portEntry 20 }
+
+portCardSubType OBJECT-TYPE
+ SYNTAX CardSubType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The CardSubType of the card this port belongs to."
+ ::= { portEntry 21 }
+
+portDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " A persistent copy of ifAlias for this interface."
+ ::= { portEntry 27 }
+
+portCurrDsPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The latest downstream power level reported by the port.
+ This is valid on for ports of type dport."
+ DEFVAL { 0 }
+ ::= { portEntry 28 }
+
+portMinDsPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The latest downstream power level reported by the port.
+ This is valid on for ports of type dport."
+ DEFVAL { 0 }
+ ::= { portEntry 29 }
+
+portMaxDsPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The latest downstream power level reported by the port.
+ This is valid on for ports of type dport."
+ DEFVAL { 0 }
+ ::= { portEntry 30 }
+
+portTxFlowControlMode OBJECT-TYPE
+ SYNTAX FlowControlMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The transmit flow control settings for this port (network ports only)."
+ DEFVAL { desired }
+ ::= { portEntry 31 }
+
+portRxFlowControlMode OBJECT-TYPE
+ SYNTAX FlowControlMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " The receive flow control settings for this port (network ports only)."
+ DEFVAL { desired }
+ ::= { portEntry 32 }
+
+portTxFlowControlDetected OBJECT-TYPE
+ SYNTAX FlowControlMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The reported transmit flow control settings for this port (network ports only)."
+ DEFVAL { unknown }
+ ::= { portEntry 33 }
+
+portRxFlowControlDetected OBJECT-TYPE
+ SYNTAX FlowControlMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The reported receive flow control settings for this port (network ports only)."
+ DEFVAL { unknown }
+ ::= { portEntry 34 }
+
+portMacIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The MAC IfIndex currently associcated with the RF port."
+ DEFVAL { 0 }
+ ::= { portEntry 35 }
+
+
+
+--
+-- Disk volume tables
+--
+diskVolumeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DiskVolumeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of disk volume information."
+ ::= { equipmentTbl 4 }
+
+diskVolumeEntry OBJECT-TYPE
+ SYNTAX DiskVolumeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing pertinent information about a disk volume "
+ INDEX { diskVolumeShelfId, diskVolumeCardId, diskVolumeDriveId, diskVolumeId }
+ ::= { diskVolumeTable 1 }
+
+DiskVolumeEntry ::= SEQUENCE {
+ diskVolumeShelfId ShelfId,
+ diskVolumeCardId CardId,
+ diskVolumeDriveId Integer32,
+ diskVolumeId Integer32,
+ diskVolumeName DisplayString,
+ diskVolumeSize Integer32,
+ diskVolumeUsageLevel DiskVolumeUsageLevel,
+ diskVolumeUsagePercentage Integer32,
+ diskVolumeUsageCriticalThreshold Integer32,
+ diskVolumeUsageMajorThreshold Integer32,
+ diskVolumeUsageMinorThreshold Integer32,
+ diskVolumeAutoDeleteUnusedFile TruthValue,
+ diskVolumeTrapInh BITS,
+ diskVolumeDiskSize Integer32
+ }
+
+diskVolumeShelfId OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The unique id of the shelf this disk volume belongs to."
+ ::= { diskVolumeEntry 1 }
+
+diskVolumeCardId OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of the card this disk volume belongs to."
+ ::= { diskVolumeEntry 2 }
+
+diskVolumeDriveId OBJECT-TYPE
+ SYNTAX Integer32 (1..99)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of the disk drive this disk volume belongs to.
+ A value of 99 indicates an invalid disk drive"
+ ::= { diskVolumeEntry 3 }
+
+diskVolumeId OBJECT-TYPE
+ SYNTAX Integer32 (1..99)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unique id of this disk volume.
+ the diskVolumeShelfId, the diskVolumeCardId, the diskVolumeDiskId,
+ and the. A value of 99 indicate an invalid volume "
+ ::= { diskVolumeEntry 4 }
+
+diskVolumeName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the disk volume."
+ ::= { diskVolumeEntry 5 }
+
+diskVolumeSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The disk volume size in units of 512 bytes."
+ ::= { diskVolumeEntry 6 }
+
+diskVolumeUsageLevel OBJECT-TYPE
+ SYNTAX DiskVolumeUsageLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The disk volume usage level."
+ ::= { diskVolumeEntry 7 }
+
+diskVolumeUsagePercentage OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The disk volume usage percentage."
+ ::= { diskVolumeEntry 8 }
+
+diskVolumeUsageCriticalThreshold OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Usage percentage level when exceed will cause a
+ diskVolumeUsageNotification trap to be sent with
+ diskVolumeUsageLevel of diskVolumeUsageCritical."
+ DEFVAL { 90 }
+ ::= { diskVolumeEntry 9 }
+
+diskVolumeUsageMajorThreshold OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Usage percentage level when exceed will cause a
+ diskVolumeUsageNotification trap to be sent with
+ diskVolumeUsageLevel of diskVolumeUsageMajor."
+ DEFVAL { 80 }
+ ::= { diskVolumeEntry 10 }
+
+diskVolumeUsageMinorThreshold OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Usage percentage level when exceed will cause a
+ diskVolumeUsageNotification trap to be sent with
+ diskVolumeUsageLevel of diskVolumeUsageMinor."
+ DEFVAL { 70 }
+ ::= { diskVolumeEntry 11 }
+
+diskVolumeAutoDeleteUnusedFile OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When set to TRUE to the system will automatically delete
+ unused files when diskVolumeUsage exceed the
+ diskVolumeUsageCriticalThreshold value."
+ DEFVAL { false }
+ ::= { diskVolumeEntry 12 }
+
+diskVolumeTrapInh OBJECT-TYPE
+ SYNTAX BITS { criticalUsageLevel(0), majorUsageLevel(1),
+ minorUsageLevel(2), autoDeleteFiles(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If a bit is set, the corresponding trap
+ will not be sent. "
+ DEFVAL { {} }
+ ::= { diskVolumeEntry 13 }
+
+diskVolumeDiskSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total physical disk capacity in bytes."
+ DEFVAL { 0 }
+ ::= { diskVolumeEntry 14 }
+
+diskVolumeFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The name of a file on the disk volume use for trap notification."
+ ::= { equipmentTbl 5 }
+
+--============= DIAGNOSTIC/TEST GROUP =================--
+-- This group contains objects defined for the purpose of diagnostic and test.
+-- The disctinction between diagnostic and test is that: The resource must be in
+-- the OOS state before Diagnostic (DGN) can begin. Test, however, does not require the
+-- resource to be OOS. In-service loop back is an example of test.
+-- Test/DGN can be performed on a shelf, a card or a port. Therefore, each of them will
+-- have their own test/Dgn table.
+-- The EMS needs to retreive the test/dgn table to see what test or dgn are supported
+-- by the element.
+-- A single test/dgn consists of:
+-- a TestId, a TestName, a TestDescription, a set of commands performed on the test,
+-- a test scheduling options, a description of test result.
+-- A test Transaction Id which is populated by the EMS to synchronize test results coming
+-- back from the Agent.
+-- Test result will be sent back to the EMS via a TestResultNotification trap.
+--
+--=======================================================--
+equipmentDiag OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 5 }
+
+--
+-- CMTS diagnostic configuration
+--
+eqDiagConfig OBJECT IDENTIFIER
+ ::= { equipmentDiag 1 }
+
+remainInDiagMode OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When set to TRUE, the device being diagnosed will remain
+ in diagnostic state when the diagnostic test is completed.
+ When set to FALSE, the device will revert to its original
+ state when the diagnostic test is completed."
+ DEFVAL { true }
+ ::= { eqDiagConfig 1 }
+
+consoleOutput OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "If true then the diagnostic result will be displayed on the
+ system console. "
+ DEFVAL { false }
+ ::= { eqDiagConfig 2 }
+
+verboseLevel OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Verbose output level for diagnostic console output
+ display. Higher number indicate more detailed output."
+ DEFVAL { 2 }
+ ::= { eqDiagConfig 3 }
+
+diagTestId OBJECT-TYPE
+ SYNTAX TestId
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " Test Identification Number. Used in cardTestResultNotification variable-binding"
+ ::= { equipmentDiag 2 }
+
+--
+-- Card test table
+--
+cardTestTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CardTestEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of test available for a card. "
+ ::= { equipmentDiag 3 }
+
+cardTestEntry OBJECT-TYPE
+ SYNTAX CardTestEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing information about tests or dignostics available for
+ a card. "
+ INDEX { cardShelfTestIndex, cardTestIndex, cardTestId }
+ ::= { cardTestTable 1 }
+
+CardTestEntry ::= SEQUENCE {
+ cardShelfTestIndex ShelfId,
+ cardTestIndex CardId,
+ cardTestId TestId,
+ cardTestName DisplayString,
+ cardTestType TestType,
+ cardTestDescription DisplayString,
+ cardTestCommand TestCommand,
+ cardTestScheduleCommand TestScheduleCommand,
+ cardTestSchedule TestSchedule,
+ cardTestTime DateAndTime,
+ cardTestResult TestResult,
+ cardTestResultDesc DisplayString,
+ cardTestTransId TestTransactionId
+ }
+
+cardShelfTestIndex OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ " Shelf Identification Number taken from the Shelf Table. Used as index. "
+ ::= { cardTestEntry 1 }
+
+cardTestIndex OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Card Identification Number taken from the CardTable. Used as index. "
+ ::= { cardTestEntry 2 }
+
+cardTestId OBJECT-TYPE
+ SYNTAX TestId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Test Identification Number. Used as index to test table "
+ ::= { cardTestEntry 3 }
+
+cardTestName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " A unique name for this test."
+ ::= { cardTestEntry 4 }
+
+cardTestType OBJECT-TYPE
+ SYNTAX TestType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Test Type."
+ DEFVAL { unknown }
+ ::= { cardTestEntry 5 }
+
+cardTestDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " A short description of the test. "
+ ::= { cardTestEntry 6 }
+
+cardTestCommand OBJECT-TYPE
+ SYNTAX TestCommand
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Command to be execute this test on this shelf "
+ DEFVAL { noop }
+ ::= { cardTestEntry 7 }
+
+cardTestScheduleCommand OBJECT-TYPE
+ SYNTAX TestScheduleCommand
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Schedule Command to be execute this test on this shelf "
+ DEFVAL { noop }
+ ::= { cardTestEntry 8 }
+
+cardTestSchedule OBJECT-TYPE
+ SYNTAX TestSchedule
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Test Scheduling. "
+ DEFVAL { 0 }
+ ::= { cardTestEntry 9 }
+
+cardTestTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Test start time. "
+ ::= { cardTestEntry 10 }
+
+cardTestResult OBJECT-TYPE
+ SYNTAX TestResult
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Result of the test. "
+ DEFVAL { notRun }
+ ::= { cardTestEntry 11 }
+
+cardTestResultDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Additional information of the test result. "
+ ::= { cardTestEntry 12 }
+
+cardTestTransId OBJECT-TYPE
+ SYNTAX TestTransactionId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Test transaction Id. "
+ ::= { cardTestEntry 13 }
+
+--
+-- Audit configuration
+--
+equipmentAudit OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 6 }
+
+auditAutoScheduling OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Enable or disable automatic audit execution. "
+ DEFVAL { true }
+ ::= { equipmentAudit 1 }
+
+auditLogOutput OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Enable or disable logging of error entries to system log. "
+ DEFVAL { true }
+ ::= { equipmentAudit 2 }
+
+auditLogThrottle OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Enable or disable audit log output throttling to prevent
+ audit errors from flooding the log. "
+ DEFVAL { true }
+ ::= { equipmentAudit 3 }
+
+auditTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AuditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of test available for a card. "
+ ::= { equipmentAudit 4 }
+
+auditEntry OBJECT-TYPE
+ SYNTAX AuditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A conceptual row contains information about Audits. "
+ INDEX { auditShelfId, auditCardId, auditId }
+ ::= { auditTable 1 }
+
+AuditEntry ::= SEQUENCE {
+ auditShelfId ShelfId,
+ auditCardId CardId,
+ auditId Unsigned32,
+ auditName DisplayString,
+ auditDescription DisplayString,
+ auditTime DateAndTime,
+ auditCommand INTEGER,
+ auditStatus INTEGER,
+ auditResult INTEGER,
+ auditPassedCount Unsigned32,
+ auditFailedCount Unsigned32,
+ auditCycleCount Unsigned32,
+ auditTotalPassedCount Unsigned32,
+ auditTotalFailedCount Unsigned32
+ }
+
+auditShelfId OBJECT-TYPE
+ SYNTAX ShelfId
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ " Shelf Identification Number taken from the Shelf Table. Used as index. "
+ ::= { auditEntry 1 }
+
+auditCardId OBJECT-TYPE
+ SYNTAX CardId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Card Identification Number taken from the CardTable. Used as index. "
+ ::= { auditEntry 2 }
+
+auditId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Unique ID of the internal Audit "
+ ::= { auditEntry 3 }
+
+auditName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Name of the internal Audit "
+ ::= { auditEntry 4 }
+
+auditDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description of the Audit "
+ ::= { auditEntry 5 }
+
+auditTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Start time of the audit. "
+ ::= { auditEntry 6 }
+
+auditCommand OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ runnow(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Audit Commands. The runnow command will stop the currently running
+ audit sequence and start executing requested audit immediated. If
+ enabled, automatic audit schedule will be restarted."
+ DEFVAL { enable }
+ ::= { auditEntry 7 }
+
+auditStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Audit status. "
+ ::= { auditEntry 8 }
+
+auditResult OBJECT-TYPE
+ SYNTAX INTEGER {
+ passed(1),
+ failed(2),
+ abort(4),
+ notRun(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Audit Result. "
+ ::= { auditEntry 9 }
+
+auditPassedCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of passed entry during previous audit run. "
+ ::= { auditEntry 10 }
+
+auditFailedCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of failed entry during previous audit run. "
+ ::= { auditEntry 11 }
+
+auditCycleCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of audit run completed. "
+ ::= { auditEntry 12 }
+
+auditTotalPassedCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of cumulative passed entry of all audit runs. "
+ ::= { auditEntry 13 }
+
+auditTotalFailedCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Number of cumulative failed entry of all audit runs. "
+ ::= { auditEntry 14 }
+
+--
+-- Cablemodem status notifications
+--
+cmDevice OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 8 }
+
+cmMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The MAC address for the cable modem"
+ ::= { cmDevice 1 }
+
+cmVendor OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The vendor name of the cable modem"
+ ::= { cmDevice 2 }
+
+cmResetReason OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The reason for the cable modem to reset"
+ ::= { cmDevice 3 }
+
+cmUChannelID OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The CMTS upstream channel ID which is connected to the cable modem"
+ ::= { cmDevice 4 }
+
+cmPrimarySID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16383)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The primary Service Identifier (SID) assigned by the CMTS associated with the cable modem"
+ ::= { cmDevice 5 }
+
+cmResetStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The cable modem status before it resets"
+ ::= { cmDevice 6 }
+
+cmResetUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This value indicates how long in hundreds of seconds the cable modem
+ is up since it is initial ranged"
+ ::= { cmDevice 7 }
+
+cmResetInfo OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The additional information for the cable modem to reset"
+ ::= { cmDevice 8 }
+
+cmIpAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(4 | 16))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the cable modem"
+ ::= { cmDevice 9 }
+
+--
+-- FPGA Error Event configuration
+--
+equipmentError OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 9 }
+
+fpgaErrorEventTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FpgaErrorEventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Overrides default handling of FPGA error events."
+ ::= { equipmentError 1 }
+
+fpgaErrorEventEntry OBJECT-TYPE
+ SYNTAX FpgaErrorEventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing information about FPGA error event handling."
+ INDEX { cardId, errEventId }
+ ::= { fpgaErrorEventTable 1 }
+
+FpgaErrorEventEntry ::= SEQUENCE {
+ errEventId Unsigned32,
+ errEvRecoveryEnabled TruthValue,
+ errEvLoggingEnabled TruthValue,
+ errEvLogLevel Integer32,
+ errEvRowStatus RowStatus
+ }
+
+errEventId OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Event ID associated with the FPGA error. A row in
+ this table defines behavior for a specific FPGA error
+ that overrides the default behavior of the system. "
+ ::= { fpgaErrorEventEntry 1 }
+
+errEvRecoveryEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " If true, the card can be recovered when this FPGA error
+ is detected. When the card is recovered depends on the
+ setting of errEvRecoveryThreshold. If this value is false,
+ the card will not be recovered when this error is detected. "
+ DEFVAL { true }
+ ::= { fpgaErrorEventEntry 2 }
+
+errEvLoggingEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " If true, the card will provide notification of the
+ occurance of the this error. When the notification
+ occurs is dependent on the setting of
+ errEvLogThrottleThreshold. The severity of the notification
+ is determined by the setting of errEvLogLevel. "
+ DEFVAL { true }
+ ::= { fpgaErrorEventEntry 3 }
+
+errEvLogLevel OBJECT-TYPE
+ SYNTAX Integer32 (1..8)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " If errEvLoggingEnabled is true, this setting sets the
+ severity level of the generated notification. In
+ general, higher values indicate lower severity. "
+ DEFVAL { 4 }
+ ::= { fpgaErrorEventEntry 4 }
+
+errEvRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " The only set actions supported on this table are
+ createAndGo(4) and destroy(6). "
+ ::= { fpgaErrorEventEntry 5 }
+
+--
+-- Arris Equipment MIB conformance statements
+--
+cadEquipmentMibConformance OBJECT IDENTIFIER
+ ::= { cadEquipmentMib 10 }
+
+cadEquipmentMibCompliances OBJECT IDENTIFIER
+ ::= { cadEquipmentMibConformance 1 }
+
+cadEquipmentMibGroup OBJECT IDENTIFIER
+ ::= { cadEquipmentMibConformance 2 }
+
+--
+-- Equipment state change notifications
+--
+cardPrStateChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
+ cardType, cardSubType, cardPrState }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the card's Primary
+ state changes. "
+ ::= { equipmentTraps 5 }
+
+cardSecStateChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
+ cardType, cardSubType, cardSecState }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the card's Secondary
+ state changes. "
+ ::= { equipmentTraps 6 }
+
+cardDetectedChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
+ cardDetected, cardSubDetected }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever a new card is detected. "
+ ::= { equipmentTraps 7 }
+
+cardDplxStatusChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
+ cardType, cardSubType, cardDplxStatus }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the card's Duplex
+ status changes. "
+ ::= { equipmentTraps 8 }
+
+portPrStateChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
+ portNumber, portType, portPrState, portCardSubType,
+ portDocsIfIndex }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the port's Primary
+ state changes. "
+ ::= { equipmentTraps 9 }
+
+portSecStateChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
+ portNumber, portType, portSecState, portCardSubType,
+ portDocsIfIndex }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the port's Secondary
+ state changes. "
+ ::= { equipmentTraps 10 }
+
+portDplxStatusChange NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
+ portNumber, portType, cardDplxStatus }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent whenever the port's Duplex
+ status changes. "
+ ::= { equipmentTraps 11 }
+
+cardTestResultNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
+ diagTestId, cardTestName, cardTestResult,
+ cardTestResultDesc, cardTestTransId }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent when a test or diagnostic completed on a card. "
+ ::= { equipmentTraps 13 }
+
+cmResetClearNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
+ cmUChannelID, cardNumber }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent when a CM is on-line from previous flap."
+ ::= { equipmentTraps 15 }
+
+--
+-- Cablemodem reset definition
+--
+cmResetNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
+ cmVendor, cmResetReason, cmUChannelID, cmPrimarySID,
+ cmResetStatus, cmResetUpTime, cardNumber, cmResetInfo }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent when a CM is reset."
+ ::= { equipmentTraps 16 }
+
+diskVolumeUsageNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
+ diskDriveNumber, diskVolumeNumber,
+ diskVolumeUsageLevel, diskVolumeName }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when a disk volume usage level
+ exceed a disk usage threshold."
+ ::= { equipmentTraps 17 }
+
+diskVolumeAutoDeleteFileNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
+ diskDriveNumber, diskVolumeNumber, diskVolumeName,
+ diskVolumeFileName }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when a file is automatically
+ deleted by the system in respond to disk volume
+ usage exceed critical thresholh."
+ ::= { equipmentTraps 18 }
+
+cardTempOutOfRangeNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, cardNumber }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when the card temperature is out of range."
+ ::= { equipmentTraps 19 }
+
+cardTempNoReportNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, cardNumber }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when there is no reporting on card temperature."
+ ::= { equipmentTraps 20 }
+
+cardTempOverHeatNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, cardNumber }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when the card is overheat, card is being shut down."
+ ::= { equipmentTraps 21 }
+
+downstreamPowerLoss NOTIFICATION-TYPE
+ OBJECTS { trapCounter, trapSeverity, cardNumber, portNumber }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent when c4 detects the loss of downstream power."
+ ::= { equipmentTraps 22 }
+
+--
+-- Cablemodem registration definition
+--
+cmRegistrationNotification NOTIFICATION-TYPE
+ OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
+ cmVendor, cmUChannelID, cardNumber, cmIpAddress }
+ STATUS current
+ DESCRIPTION
+ " This trap is sent when a CM is registered."
+ ::= { equipmentTraps 23 }
+
+--
+-- MIB conformance object groups
+--
+systemGeneralGroup OBJECT-GROUP
+ OBJECTS { systemClock, trapCounter, trapSeverity, systemKey }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects general to the overall
+ system. "
+ ::= { cadEquipmentMibGroup 1 }
+
+equipmentStateGroup OBJECT-GROUP
+ OBJECTS { cardLastChangeTime, portLastChangeTime }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects general to the state
+ of the equipments. "
+ ::= { cadEquipmentMibGroup 2 }
+
+equipmentShelfGroup OBJECT-GROUP
+ OBJECTS { shelfName, shelfSwVersion }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects general specific to shelf
+ objects. "
+ ::= { cadEquipmentMibGroup 3 }
+
+equipmentCardGroup OBJECT-GROUP
+ OBJECTS { cardName, cardType, cardSubType, cardSerialNum,
+ cardFwVersion, cardHwVersion, cardSwVersion,
+ cardAdminState, cardPrState, cardSecState,
+ cardDplxStatus, cardAction,
+ cardTrapInh, cardNumPorts, cardDetected,
+ cardSubDetected, cardFwUpdateStatus, cardSpareGroupId,
+ cardSpareGroupMode, cardUpTime, cardTemperature,
+ cardCpuType, cardCpuSpeed, cardBusSpeed, cardRamSize,
+ cardFlashSize, cardCPLDVersion, cardFpgaSource,
+ cardBootVersion, cardLastBootVersion,
+ cardLastBootSource, cardPicDetected, cardPicSerialNum,
+ cardPicHwVersion, cardTemperatureHighWarn, cardTemperatureHighError }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects general specific to Card
+ table. "
+ ::= { cadEquipmentMibGroup 4 }
+
+equipmentPortGroup OBJECT-GROUP
+ OBJECTS { portType, portAdminState, portPrState, portSecState,
+ portDplxStatus, portAction,
+ portTrapInh, portNumChans, portMacAddress, portMode,
+ portDetectedMode, portDocsIfIndex, portBgpId,
+ portConnectorId, portCardSubType,
+ portDescription, portCurrDsPower, portMinDsPower, portMaxDsPower,
+ portTxFlowControlMode, portRxFlowControlMode,
+ portTxFlowControlDetected, portRxFlowControlDetected }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects specific to Port table. "
+ ::= { cadEquipmentMibGroup 5 }
+
+equipmentDiagGroup OBJECT-GROUP
+ OBJECTS { remainInDiagMode, verboseLevel }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects specific to equipment diagnostics. "
+ ::= { cadEquipmentMibGroup 6 }
+
+equipmentCardTestGroup OBJECT-GROUP
+ OBJECTS { cardTestName, cardTestType, cardTestDescription,
+ cardTestCommand, cardTestScheduleCommand,
+ cardTestSchedule, cardTestTime, cardTestResult,
+ cardTestResultDesc, cardTestTransId }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects specific to card Test group "
+ ::= { cadEquipmentMibGroup 8 }
+
+equipmentAuditGroup OBJECT-GROUP
+ OBJECTS { auditAutoScheduling, auditLogOutput, auditLogThrottle,
+ auditName, auditDescription, auditTime, auditCommand,
+ auditStatus, auditResult, auditPassedCount,
+ auditFailedCount, auditCycleCount,
+ auditTotalPassedCount, auditTotalFailedCount }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects specific audit group. "
+ ::= { cadEquipmentMibGroup 10 }
+
+diskVolumeGroup OBJECT-GROUP
+ OBJECTS { diskVolumeName, diskVolumeSize, diskVolumeUsageLevel,
+ diskVolumeUsagePercentage,
+ diskVolumeUsageCriticalThreshold,
+ diskVolumeUsageMajorThreshold,
+ diskVolumeUsageMinorThreshold,
+ diskVolumeAutoDeleteUnusedFile, diskVolumeTrapInh,
+ diskVolumeFileName }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects specific to disk volume objects. "
+ ::= { cadEquipmentMibGroup 11 }
+
+fpgaErrorEventGroup OBJECT-GROUP
+ OBJECTS { errEvRecoveryEnabled, errEvLoggingEnabled,
+ errEvLogLevel }
+ STATUS current
+ DESCRIPTION
+ " This group contains a collection of objects dealing with FPGA errors. "
+ ::= { cadEquipmentMibGroup 12 }
+
+cadEquipmentMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which
+ implement the Equipment MIB. "
+
+ MODULE -- this module
+
+ MANDATORY-GROUPS { systemGeneralGroup,
+ equipmentStateGroup, equipmentShelfGroup,
+ equipmentCardGroup, equipmentPortGroup,
+ equipmentDiagGroup, equipmentCardTestGroup,
+ equipmentAuditGroup,
+ diskVolumeGroup, fpgaErrorEventGroup }
+
+ ::= { cadEquipmentMibCompliances 1 }
+
+END -- end of module CADANT-CMTS-EQUIPMENT-MIB.
+
|