Initial commitHEADmain

1 files changed, 751 insertions, 0 deletions

diff --git a/MIBS/bluecatnetworks/BCN-NTP-MIB b/MIBS/bluecatnetworks/BCN-NTP-MIB
new file mode 100755
index 0000000..449a0d5
--- /dev/null
+++ b/MIBS/bluecatnetworks/BCN-NTP-MIB
@@ -0,0 +1,751 @@
+-- Copyright 2017 BlueCat Networks. All rights reserved.
+-- *****************************************************************
+-- BCN-NTP-MIB.mib:  BlueCat Networks NTP services
+--
+--
+-- December 2010, Fabian Ischia
+--
+-- All rights reserved.
+-- 
+-- *****************************************************************
+
+BCN-NTP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
+    OBJECT-TYPE, Integer32, Unsigned32
+        FROM SNMPv2-SMI
+    InetAddress, InetAddressType, InetPortNumber
+        FROM INET-ADDRESS-MIB
+    TEXTUAL-CONVENTION, TruthValue, DisplayString
+        FROM SNMPv2-TC
+    OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    BcnAlarmSeverity
+        FROM BCN-TC-MIB
+    bcnServices
+        FROM BCN-SMI-MIB;
+
+bcnNtpMIB MODULE-IDENTITY
+    LAST-UPDATED	"201012150000Z"
+    ORGANIZATION	"BlueCat Networks"
+    CONTACT-INFO
+        "BlueCat Networks. Customer Care.
+
+        North America
+        Call: +1.866.491.2228
+        Europe
+        Call: +44.8081.011.306
+        Other
+        Call: +1.416.646.8433
+        
+        Email: support@bluecatnetworks.com"
+    DESCRIPTION
+        "This module provides status as well as statistical information
+        about the NTP service.
+
+		Most of the OIDs defined on this MIB are based on the work done by
+        A.S. Sethi and Dave Mills in the University of Delaware and published
+        as:
+		Management of the Network Time Protocol (NTP) with SNMP
+        Technical Report No. 98-09
+        Other references used in the creation of this MIB are RFC-1305 and
+        RFC-5905"
+    REVISION "201012150000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { bcnNtp 1 }
+
+bcnNtp OBJECT IDENTIFIER  ::= { bcnServices 4 }
+
+-- Organization
+
+bcnNtpObjects OBJECT IDENTIFIER 
+    ::= { bcnNtp 2 }
+
+bcnNtpNotification OBJECT IDENTIFIER 
+    ::= { bcnNtp 3 }
+
+bcnNtpConformance OBJECT IDENTIFIER 
+    ::= { bcnNtp 4 }
+
+-- Textual Conventions
+NTPTimeStamp ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "4x.4x"
+    STATUS          current
+    DESCRIPTION
+        "NTP timestamps are represented as a 64-bit
+        unsigned fixed-point number, in seconds relative to
+        00:00 on 1 January 1900.  The integer part is in the
+        first 32 bits and the fraction part is in the last
+        32 bits."
+    REFERENCE
+        "D.L. Mills, University of Delaware,
+		'Network Time Protocol(Version 3)',
+        RFC-1305, March 1992, Section 3.1"
+    SYNTAX          OCTET STRING (SIZE (8))
+
+NTPLeapIndicator ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This is a two-bit code warning of an impending leap second to be
+         inserted in the NTP timescale. The bits are set before 23:59 on
+         the day of insertion and reset after 00:00 on the following day.
+         This causes the number of seconds (rollover interval) in the day
+         of insertion to be increased or decreased by one. In the case of 
+         primary servers the bits are set by operator intervention, while
+         in the case of secondary servers the bits are set by the protocol.
+         The two bits, bit 0 and bit 1, respectively, are coded as follows:
+            00, no warning
+            01, last minute has 61 seconds
+            10, last minute has 59 seconds
+            11, alarm condition (clock not synchronized)"
+
+    REFERENCE
+        "D.L. Mills, University of Delaware,
+		'Network Time Protocol(Version 3)',
+        RFC-1305, March 1992, Section 3.2.1"
+    SYNTAX          INTEGER  {
+                        noWarning(0),
+                        addSecond(1),
+                        subtractSecond(2),
+                        alarm(3)
+                    }
+
+NTPRefId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "4x"
+    STATUS          current
+    DESCRIPTION
+        "32-bit code identifying the particular server or reference clock.
+        The interpretation depends on the value in the stratum field. For
+        packet stratum 0 (unspecified or invalid), this is a four-character
+        ASCII string. For stratum 1 (reference clock), this is a four-octet,
+        left-justified, zero-padded ASCII string assigned to the reference
+        clock.
+        Above stratum 1 (secondary servers and clients): this is the
+        reference identifier of the server and can be used to detect timing
+        loops. If using the IPv4 address family, the identifier is the four-
+        octet IPv4 address. If using the IPv6 address family, it is the first
+        four octets of the MD5 hash of the IPv6 address."
+    REFERENCE
+        "D.L. Mills, University of Delaware,
+		'Network Time Protocol(Version 3)',
+         RFC-5905, June 2010, Section 7.3"
+    SYNTAX          OCTET STRING (SIZE (4))
+
+-- Data objects
+
+bcnNtpServiceStatus OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "General state of the NTP Service."
+    ::= { bcnNtpObjects 1 }
+
+bcnNtpSerOperState OBJECT-TYPE
+    SYNTAX      INTEGER {
+      running(1),
+      notRunning(2),
+      starting(3),
+      stopping(4),
+      fault(5)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Operational state of the Service. The possible states are:
+        running(1)    The service is running normally.
+        notRunning(2) The service is stopped either intentionally (i.e.:
+                      the service is not supposed to run on this node) or
+                      unintentionally (a problem has occurred).
+        starting(3)   The service is in the process of starting, either
+                      for the first time of after an event occurred.
+        stopping(4)   The service is in the process of stopping. Stopping
+                      a service might be necessary after a configuration
+                      change.
+        fault(5)      An error has been detected and the state is undefined.
+        "
+    ::= { bcnNtpServiceStatus 1 }
+
+bcnNtpSystem OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "General NTP system information."
+    ::= { bcnNtpObjects 2 }
+
+bcnNtpSysLeap OBJECT-TYPE
+    SYNTAX      NTPLeapIndicator
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Two-bit code warning of an impending leap
+         second to be inserted in the NTP timescale."
+    ::= { bcnNtpSystem 1 }
+
+bcnNtpSysStratum OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicating the stratum of the local clock.
+         0, unspecified
+         1, primary reference (e.g., calibrated atomic clock, radio clock)
+         2-255, secondary reference (via NTP)"
+    ::= { bcnNtpSystem 2 }
+
+bcnNtpSysPrecision OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Signed integer indicating the precision of the various clocks,
+        in seconds to the nearest power
+        of two."
+    ::= { bcnNtpSystem 3 }
+
+bcnNtpSysRootDelay OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total roundtrip delay to the primary reference source at the
+        root of the synchronization subnet, in seconds.
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpSystem 4 }
+
+bcnNtpSysRootDispersion OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maximum error relative to the primary reference source at the
+        root of the synchronization subnet, in seconds. Only positive values
+        greater than zero are possible.
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpSystem 5 }
+
+bcnNtpSysRefId OBJECT-TYPE
+    SYNTAX      NTPRefId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The particular reference clock."
+    ::= { bcnNtpSystem 6 }
+
+bcnNtpSysRefTime OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The local time when the local clock was last updated. If the
+        local clock has never been synchronized, the value is zero."
+    ::= { bcnNtpSystem 7 }
+
+bcnNtpSysPoll OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The minimum interval between transmitted
+        messages, in seconds as a power of two. For instance,
+        a value of six indicates a minimum interval of 64 seconds."
+    ::= { bcnNtpSystem 8 }
+
+bcnNtpSysPeer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current synchronization source. This is the association ID
+        of the system peer. The special value NULL indicates there is no
+        currently valid synchronization source."
+    ::= { bcnNtpSystem 9 }
+
+bcnNtpSysFreq OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The clock frequency offset (PPM)
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpSystem 10 }
+
+bcnNtpSysClock OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current local time. Local time is derived from the hardware
+        clock of the particular machine and increments at intervals
+        depending on the design used."
+    ::= { bcnNtpSystem 11 }
+
+bcnNtpSysSystem OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of the local Operating System"
+    ::= { bcnNtpSystem 12 }
+
+bcnNtpSysProcessor OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of the local Processor"
+    ::= { bcnNtpSystem 13 }
+
+bcnNtpSysJitter OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates how much the individual pulses vary from second to 
+        second (as measured by the operating system's clock).
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpSystem 14 }
+
+-- Peers information
+
+bcnNtpPeers OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "NTP peers information."
+    ::= { bcnNtpObjects 3 }
+
+
+bcnNtpPeersVarTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF BcnNtpPeersVarEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table listing the peers known to the server as well as summary
+        information of their state."
+    ::= { bcnNtpPeers 1 }
+
+bcnNtpPeersVarEntry OBJECT-TYPE
+    SYNTAX      BcnNtpPeersVarEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A logical row in the bcnNtpPeersVarTable."
+    INDEX       { bcnNtpPeersAssocId }
+    ::= { bcnNtpPeersVarTable 1 }
+
+BcnNtpPeersVarEntry ::= SEQUENCE {
+    bcnNtpPeersAssocId             Unsigned32,
+    bcnNtpPeersConfigured          TruthValue,
+    bcnNtpPeersPeerAddressType     InetAddressType,
+    bcnNtpPeersPeerAddress         InetAddress,
+    bcnNtpPeersPeerPort            InetPortNumber,
+    bcnNtpPeersHostAddressType     InetAddressType,
+    bcnNtpPeersHostAddress         InetAddress,
+    bcnNtpPeersHostPort            InetPortNumber,
+    bcnNtpPeersLeap                NTPLeapIndicator,
+    bcnNtpPeersMode                INTEGER,
+    bcnNtpPeersStratum             Integer32,
+    bcnNtpPeersPeerPoll            Integer32,
+    bcnNtpPeersHostPoll            Integer32,
+    bcnNtpPeersPrecision           Integer32,
+    bcnNtpPeersRootDelay           DisplayString,
+    bcnNtpPeersRootDispersion      DisplayString,
+    bcnNtpPeersRefId               NTPRefId,
+    bcnNtpPeersRefTime             NTPTimeStamp,
+    bcnNtpPeersOrgTime             NTPTimeStamp,
+    bcnNtpPeersReceiveTime         NTPTimeStamp,
+    bcnNtpPeersTransmitTime        NTPTimeStamp,
+    bcnNtpPeersReach               Unsigned32,
+    bcnNtpPeersOffset              DisplayString,
+    bcnNtpPeersDelay               DisplayString,
+    bcnNtpPeersDispersion          DisplayString,
+    bcnNtpPeersJitter              DisplayString
+}
+
+bcnNtpPeersAssocId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Association ID of the peer."
+    ::= { bcnNtpPeersVarEntry 1 }
+
+bcnNtpPeersConfigured OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This is a bit indicating that the association
+         was created from configuration information and should not
+         be demobilized if the peer becomes unreachable."
+    ::= { bcnNtpPeersVarEntry 2 }
+
+bcnNtpPeersPeerAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Internet address type of the peer."
+    ::= { bcnNtpPeersVarEntry 3 }
+
+bcnNtpPeersPeerAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Internet address of the peer."
+    ::= { bcnNtpPeersVarEntry 4 }
+
+bcnNtpPeersPeerPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "16-bit port number of the peer."
+    ::= { bcnNtpPeersVarEntry 5 }
+
+bcnNtpPeersHostAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Internet address type of the host."
+    ::= { bcnNtpPeersVarEntry 6 }
+
+bcnNtpPeersHostAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Internet address of the host."
+    ::= { bcnNtpPeersVarEntry 7 }
+
+bcnNtpPeersHostPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "16-bit port number of the host."
+    ::= { bcnNtpPeersVarEntry 8 }
+
+bcnNtpPeersLeap OBJECT-TYPE
+    SYNTAX      NTPLeapIndicator
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Two-bit code warning of an impending leap
+         second to be inserted in the NTP timescale."
+    ::= { bcnNtpPeersVarEntry 9 }
+
+bcnNtpPeersMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+           unspecified(0),
+           symmetricActive(1), 
+           symmetricPassive(2),
+           client(3),
+           server(4), 
+           broadcast(5),
+           reservedControl(6),
+           reservedPrivate(7)
+		}
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The association mode,with values coded as
+         follows:
+         0, unspecified
+         1, symmetric active
+         2, symmetric passive
+         3, client
+         4, server
+         5, broadcast
+         6, reserved for NTP control messages
+         7, reserved for private use"
+    ::= { bcnNtpPeersVarEntry 10 }
+
+bcnNtpPeersStratum OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the stratum of the peer clock.
+         0, unspecified
+         1, primary reference (e.g., calibrated atomic clock, radio clock)
+         2-255, secondary reference (via NTP)"
+    ::= { bcnNtpPeersVarEntry 11 }
+
+bcnNtpPeersPeerPoll OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Poll interval of the peer"
+    ::= { bcnNtpPeersVarEntry 12 }
+
+bcnNtpPeersHostPoll OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Poll interval of the host"
+    ::= { bcnNtpPeersVarEntry 13 }
+
+bcnNtpPeersPrecision OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The same as the systemPrecision except this is for the peer."
+    ::= { bcnNtpPeersVarEntry 14 }
+
+bcnNtpPeersRootDelay OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The same as the systemRootDealy except this is for the peer."
+    ::= { bcnNtpPeersVarEntry 15 }
+
+bcnNtpPeersRootDispersion OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The same as the systemDispersion except this is for the peer."
+    ::= { bcnNtpPeersVarEntry 16 }
+
+bcnNtpPeersRefId OBJECT-TYPE
+    SYNTAX      NTPRefId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The same as the systemRefid except this is for the peer."
+    ::= { bcnNtpPeersVarEntry 17 }
+
+bcnNtpPeersRefTime OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The same as the systemRefTime except this is for the peer."
+    ::= { bcnNtpPeersVarEntry 18 }
+
+bcnNtpPeersOrgTime OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The local time at the peer when its latest
+         NTP message was sent. If the peer becomes unreachable the
+         value is set to zero."
+    ::= { bcnNtpPeersVarEntry 19 }
+
+bcnNtpPeersReceiveTime OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The local time when the latest NTP message
+         from the peer arrived. If the peer becomes unreachable the
+         value is set to zero."
+    ::= { bcnNtpPeersVarEntry 20 }
+
+bcnNtpPeersTransmitTime OBJECT-TYPE
+    SYNTAX      NTPTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The local time at which the NTP message departed the sender."
+    ::= { bcnNtpPeersVarEntry 21 }
+
+bcnNtpPeersReach OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A shift register of NTP.WINDOW bits used to determine
+        the reachability status of the peer, with bits entering
+        from the least significant (rightmost) end. A peer is
+        considered reachable if at least one bit in this register is
+        set to one."
+    ::= { bcnNtpPeersVarEntry 22 }
+
+bcnNtpPeersOffset OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Filter offset.
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpPeersVarEntry 23 }
+
+bcnNtpPeersDelay OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Filter delay.
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpPeersVarEntry 24 }
+
+bcnNtpPeersDispersion OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Filter dispersion.
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpPeersVarEntry 25 }
+
+bcnNtpPeersJitter OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "bcnNtpPeersJitter indicates how much the individual pulses vary
+        from second to second (as measured by the operating system's clock).
+        This is an ASCII string representing a floating point number."
+    ::= { bcnNtpPeersVarEntry 26 }
+
+-- Notification definitions
+
+bcnNtpNotificationEvents OBJECT IDENTIFIER 
+    ::= { bcnNtpNotification 0 }
+
+bcnNtpNotificationData OBJECT IDENTIFIER 
+    ::= { bcnNtpNotification 1 }
+
+-- Notification data
+
+bcnNtpAlarmSeverity OBJECT-TYPE
+    SYNTAX          BcnAlarmSeverity
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "Severity classification for the alarm."
+    ::= { bcnNtpNotificationData 1 }
+
+bcnNtpAlarmInfo OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "Descriptive information about the alarm event."
+    ::= { bcnNtpNotificationData 2 }
+
+
+-- Notification events
+
+bcnNtpAlarmNotif NOTIFICATION-TYPE
+    OBJECTS {   
+                bcnNtpSerOperState,
+                bcnNtpAlarmSeverity,
+                bcnNtpAlarmInfo
+            }
+    STATUS          current
+    DESCRIPTION
+        "A bcnNtpAlarmNotif signifies that the NTP service has transitioned
+        state or a particular event has been detected on the service."
+   ::= { bcnNtpNotificationEvents 1 }
+
+-- Conformance
+
+bcnNtpServiceCompliances OBJECT IDENTIFIER 
+    ::= { bcnNtpConformance 1 }
+
+bcnNtpServiceGroups OBJECT IDENTIFIER 
+    ::= { bcnNtpConformance 2 }
+
+
+bcnNtpServiceStatusGroup OBJECT-GROUP
+    OBJECTS { 
+          bcnNtpSerOperState
+    }
+    STATUS current
+    DESCRIPTION "Status conformance."
+    ::= { bcnNtpServiceGroups 1 }
+
+bcnNtpSystemGroup OBJECT-GROUP
+    OBJECTS { 
+          bcnNtpSysLeap,
+          bcnNtpSysStratum,
+          bcnNtpSysPrecision, 
+          bcnNtpSysRootDelay,
+          bcnNtpSysRootDispersion,
+          bcnNtpSysRefId, 
+          bcnNtpSysRefTime,
+          bcnNtpSysPoll,
+          bcnNtpSysPeer, 
+          bcnNtpSysFreq,
+          bcnNtpSysClock,
+          bcnNtpSysSystem, 
+          bcnNtpSysProcessor,
+          bcnNtpSysJitter
+    }
+    STATUS current
+    DESCRIPTION "System variables conformance."
+    ::= { bcnNtpServiceGroups 2 }
+
+bcnNtpPeersGroup OBJECT-GROUP
+    OBJECTS { 
+          bcnNtpPeersConfigured,
+          bcnNtpPeersPeerAddressType,
+          bcnNtpPeersPeerAddress,
+          bcnNtpPeersPeerPort,
+          bcnNtpPeersHostAddressType,
+          bcnNtpPeersHostAddress,
+          bcnNtpPeersHostPort,
+          bcnNtpPeersLeap,
+          bcnNtpPeersMode,
+          bcnNtpPeersStratum,
+          bcnNtpPeersPeerPoll,
+          bcnNtpPeersHostPoll,
+          bcnNtpPeersPrecision,
+          bcnNtpPeersRootDelay,
+          bcnNtpPeersRootDispersion,
+          bcnNtpPeersRefId,
+          bcnNtpPeersRefTime,
+          bcnNtpPeersOrgTime,
+          bcnNtpPeersReceiveTime,
+          bcnNtpPeersTransmitTime,
+          bcnNtpPeersReach,
+          bcnNtpPeersOffset,
+          bcnNtpPeersDelay,
+          bcnNtpPeersDispersion,
+          bcnNtpPeersJitter
+    }
+    STATUS current
+    DESCRIPTION "Peer variables conformance."
+    ::= { bcnNtpServiceGroups 3 }
+
+bcnNtpNotificationEventGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { 
+          bcnNtpAlarmNotif
+    }
+    STATUS current
+    DESCRIPTION "Server statistics conformance."
+    ::= { bcnNtpServiceGroups 4 }
+
+bcnNtpNotificationDataGroup OBJECT-GROUP
+    OBJECTS { 
+          bcnNtpAlarmSeverity, 
+          bcnNtpAlarmInfo
+    }
+    STATUS current
+    DESCRIPTION "Server statistics conformance."
+    ::= { bcnNtpServiceGroups 5 }
+
+
+bcnNtpStatusCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION "Basic conformance"
+    MODULE -- This module
+    MANDATORY-GROUPS {
+        bcnNtpServiceStatusGroup,
+        bcnNtpSystemGroup,
+        bcnNtpPeersGroup,
+        bcnNtpNotificationEventGroup, 
+        bcnNtpNotificationDataGroup }
+    ::= {bcnNtpServiceCompliances 1 }
+
+
+END