Initial commitHEADmain

1 files changed, 3122 insertions, 0 deletions

diff --git a/MIBS/brocade/FOUNDRY-SN-BGP4-GROUP-MIB b/MIBS/brocade/FOUNDRY-SN-BGP4-GROUP-MIB
new file mode 100644
index 0000000..10fa6d6
--- /dev/null
+++ b/MIBS/brocade/FOUNDRY-SN-BGP4-GROUP-MIB
@@ -0,0 +1,3122 @@
+FOUNDRY-SN-BGP4-GROUP-MIB DEFINITIONS ::= BEGIN
+
+	 IMPORTS
+			MODULE-IDENTITY, OBJECT-TYPE, Counter32, IpAddress,Integer32,Unsigned32
+					 FROM SNMPv2-SMI
+	router
+		FROM FOUNDRY-SN-ROOT-MIB
+			 InetAutonomousSystemNumber
+					 FROM INET-ADDRESS-MIB;
+
+snBgp4 MODULE-IDENTITY
+    LAST-UPDATED "201006020000Z"  -- 04 June 2010
+    ORGANIZATION "Brocade Communications Systems, Inc."
+    CONTACT-INFO
+             "Technical Support Center
+              130 Holger Way,
+              San Jose, CA  95134
+              Email:  ipsupport@brocade.com
+              Phone: 1-800-752-8061
+              URL:  www.brocade.com"
+    DESCRIPTION
+             "Copyright 1996-2010 Brocade Communications Systems, Inc.
+              All rights reserved.
+              This Brocade Communications Systems SNMP Management Information Base Specification
+              embodies Brocade Communications Systems' confidential and proprietary
+              intellectual property. Brocade Communications Systems retains all
+              title and ownership in the Specification, including any revisions.
+
+              This Specification is supplied AS IS, and Brocade Communications Systems makes
+              no warranty, either express or implied, as to the use,
+              operation, condition, or performance of the specification, and any unintended
+              consequence it may on the user environment."
+
+    REVISION        "201006020000Z"  -- 04 June 2010
+    DESCRIPTION
+        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
+
+    REVISION     "200909300000Z" -- September 30, 2009
+    DESCRIPTION
+			"convert from SMIv1 to SMIv2"
+   ::= { router 11}
+
+-- Groups
+
+snBgp4Gen 	        	OBJECT IDENTIFIER ::= { snBgp4 1 }
+snBgp4AddrFilter 		OBJECT IDENTIFIER ::= { snBgp4 2 }
+snBgp4AggregateAddr 	OBJECT IDENTIFIER ::= { snBgp4 3 }
+snBgp4AsPathFilter 		OBJECT IDENTIFIER ::= { snBgp4 4 }
+snBgp4CommunityFilter 	OBJECT IDENTIFIER ::= { snBgp4 5 }
+snBgp4NeighGenCfg 		OBJECT IDENTIFIER ::= { snBgp4 6 }
+snBgp4NeighDistGroup 	OBJECT IDENTIFIER ::= { snBgp4 7 }
+snBgp4NeighFilterGroup 	OBJECT IDENTIFIER ::= { snBgp4 8 }
+snBgp4NeighRouteMap 	OBJECT IDENTIFIER ::= { snBgp4 9 }
+snBgp4Network 			OBJECT IDENTIFIER ::= { snBgp4 10 }
+snBgp4Redis 			OBJECT IDENTIFIER ::= { snBgp4 11 }
+snBgp4RouteMapFilter 	OBJECT IDENTIFIER ::= { snBgp4 12 }
+snBgp4RouteMapMatch 	OBJECT IDENTIFIER ::= { snBgp4 13 }
+snBgp4RouteMapSet 	    OBJECT IDENTIFIER ::= { snBgp4 14 }
+snBgp4NeighOperStatus 	OBJECT IDENTIFIER ::= { snBgp4 15 }
+snBgp4RouteOperStatus	OBJECT IDENTIFIER ::= { snBgp4 16 }
+snBgp4NeighborSummary	OBJECT IDENTIFIER ::= { snBgp4 17 }
+snBgp4Attribute			OBJECT IDENTIFIER ::= { snBgp4 18 }
+snBgp4ClearNeighborCmd	OBJECT IDENTIFIER ::= { snBgp4 19 }
+snBgp4NeighPrefixGroup 	OBJECT IDENTIFIER ::= { snBgp4 20 }
+
+--  BGP4 General Variables
+
+--  These parameters apply globally to the Router's
+--  BGP4 Process.
+
+
+	 snBgp4GenAlwaysCompareMed OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To enable/disable the comparison of the Multi-Exit Discriminator for paths from
+			neighbors in different AS."
+		 ::= { snBgp4Gen 1 }
+
+	 snBgp4GenAutoSummary OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To enable/disable the default behavior of automatic summarization of subnet routes
+			into network-level routes."
+		 ::= { snBgp4Gen 2 }
+
+	 snBgp4GenDefaultLocalPreference OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To set the default local preference attribute."
+		 ::= { snBgp4Gen 3 }
+
+	 snBgp4GenDefaultInfoOriginate OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To enable/disable the default Information Originate."
+		 ::= { snBgp4Gen 4 }
+
+	 snBgp4GenFastExternalFallover OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To enable/disable an action of immediately reset the BGP sessions of any
+			directly adjacent external neighbors if the link used to reach them goes
+			down."
+		 ::= { snBgp4Gen 5 }
+
+	 snBgp4GenNextBootNeighbors OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The next-boot configured number of neighbors in a BGP Peer Group.
+			The minimum value of this MIB is snBgp4GenMinNeighbors.
+			The maximum value of this MIB is snBgp4GenMaxNeighbors."
+		 ::= { snBgp4Gen 6 }
+
+	 snBgp4GenNextBootRoutes OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The next-boot configured number of Routes.
+			The minimum value of this MIB is snBgp4GenMinRoutes.
+			The maximum value of this MIB is snBgp4GenMaxRoutes."
+		 ::= { snBgp4Gen 7 }
+
+	 snBgp4GenSynchronization OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To enable/disable the synchronization between BGP and your IGP."
+		 ::= { snBgp4Gen 8 }
+
+	 snBgp4GenKeepAliveTime OBJECT-TYPE
+		 SYNTAX   INTEGER (0..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The Keep alive timer."
+		 ::= { snBgp4Gen 9 }
+
+	 snBgp4GenHoldTime OBJECT-TYPE
+		 SYNTAX   INTEGER (0..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The Hold time timer."
+		 ::= { snBgp4Gen 10 }
+
+	 snBgp4GenRouterId OBJECT-TYPE
+		 SYNTAX   IpAddress
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"BGP Router Id."
+		 ::= { snBgp4Gen 11 }
+
+	 snBgp4GenTableMap OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..32))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the route-map name, each character of the name
+			is represented by one octet."
+		 ::= { snBgp4Gen 12 }
+
+	 snBgp4GenAdminStat OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled (0), enabled (1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The administrative status of BGP4 in the router.  The
+			value 'enabled' denotes that the BGP4 routing is active
+			in this router; 'disabled' disables BGP4 routing on this router."
+		 ::= { snBgp4Gen 13 }
+
+	 snBgp4GenDefaultMetric OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To set default metric values for the BGP4 protocol."
+		 ::= { snBgp4Gen 14 }
+
+	 snBgp4GenMaxNeighbors OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum number of neighbors can be configured in a BGP Peer Group."
+		 ::= { snBgp4Gen 15 }
+
+	 snBgp4GenMinNeighbors OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The minimum number of neighbors can be configured in a BGP Peer Group."
+		 ::= { snBgp4Gen 16 }
+
+	 snBgp4GenMaxRoutes OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of Routes."
+		 ::= { snBgp4Gen 17 }
+
+	 snBgp4GenMinRoutes OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The minimum configured number of Routes."
+		 ::= { snBgp4Gen 18 }
+
+	 snBgp4GenMaxAddrFilters OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 address filters."
+		 ::= { snBgp4Gen 19 }
+
+	 snBgp4GenMaxAggregateAddresses OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 aggregate addresses."
+		 ::= { snBgp4Gen 20 }
+
+	 snBgp4GenMaxAsPathFilters OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 AS-PATH filters."
+		 ::= { snBgp4Gen 21 }
+
+	 snBgp4GenMaxCommunityFilters OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 Community filters."
+		 ::= { snBgp4Gen 22 }
+
+	 snBgp4GenMaxNetworks OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 Networks."
+		 ::= { snBgp4Gen 23 }
+
+	 snBgp4GenMaxRouteMapFilters OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of BGP4 Route-map Filters."
+		 ::= { snBgp4Gen 24 }
+
+	 snBgp4GenNeighPrefixMinValue OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The minimum configured value of BGP4 Neighbor Prefix."
+		 ::= { snBgp4Gen 25 }
+
+	 snBgp4GenOperNeighbors OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The current operational max number of neighbors configured for a BGP Group."
+		 ::= { snBgp4Gen 26 }
+
+	 snBgp4GenOperRoutes OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The current operational number of Routes."
+		 ::= { snBgp4Gen 27 }
+
+	 snBgp4GenLocalAs OBJECT-TYPE
+		 SYNTAX   INTEGER (1..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 local autonomous system number."
+		 ::= { snBgp4Gen 28 }
+
+	 snBgp4GenRoutesInstalled OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 installed routes."
+		 ::= { snBgp4Gen 29 }
+
+	 snBgp4GenAsPathInstalled OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 installed autonomous system path."
+		 ::= { snBgp4Gen 30 }
+
+	 snBgp4ExternalDistance OBJECT-TYPE
+		 SYNTAX  INTEGER (1..255)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Administrative distance for BGP external routes."
+		 DEFVAL { 20 }
+		 ::= { snBgp4Gen 31 }
+
+	 snBgp4InternalDistance OBJECT-TYPE
+		 SYNTAX  INTEGER (1..255)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Administrative distance for BGP internal routes."
+		 DEFVAL { 200 }
+		 ::= { snBgp4Gen 32 }
+
+	 snBgp4LocalDistance OBJECT-TYPE
+		 SYNTAX  INTEGER (1..255)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Administrative distance for BGP local routes."
+		 DEFVAL { 200 }
+		 ::= { snBgp4Gen 33 }
+
+	 snBgp4OperNumOfAttributes OBJECT-TYPE
+		 SYNTAX Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+		"The operational number of attribute entries."
+		 ::= { snBgp4Gen 34 }
+
+	 snBgp4NextBootMaxAttributes OBJECT-TYPE
+		 SYNTAX  INTEGER (200..30000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"The next boot maximum attribute entries. 10000 means reset to default."
+		 DEFVAL { 10000 }
+		 ::= { snBgp4Gen 35 }
+
+	 snBgp4ClusterId OBJECT-TYPE
+		 SYNTAX  Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"A cluster ID which is represented by 4 bytes unsigned
+		 integer (0..0xFFFFFFFF). 0 means reset to default."
+		 ::= { snBgp4Gen 36 }
+
+	 snBgp4ClientToClientReflection OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"To enable/disable the client to client reflection in BGP4."
+		 ::= { snBgp4Gen 37 }
+
+	 snBgp4GenTotalNeighbors OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The current total number of neighbors running in a BGP Group."
+		 ::= { snBgp4Gen 38 }
+
+	 snBgp4GenMaxPaths OBJECT-TYPE
+		 SYNTAX   INTEGER (1..8)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The maximum configured number of Paths."
+		 ::= { snBgp4Gen 39 }
+
+	 snBgp4GenConfedId OBJECT-TYPE
+		 SYNTAX   INTEGER (1..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Confederation Id."
+		 ::= { snBgp4Gen 40 }
+
+	 snBgp4GenConfedPeers OBJECT-TYPE
+	 SYNTAX  OCTET STRING (SIZE(0..100))
+	 MAX-ACCESS  read-write
+	 STATUS  current
+	 DESCRIPTION
+		"An AS number from 1 to 0xFFFF construct confederation peers.
+		 There are 50(max peers) of them.
+		 This integer number is represented by 2 OCTETs."
+		 ::= { snBgp4Gen 41 }
+
+	 snBgp4GenDampening OBJECT-TYPE
+		 SYNTAX   INTEGER { none (0), parameters (1), routeMap (2) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The dampening of BGP4 in the router.
+			value 'none' denotes that the BGP4  dampening is off
+			'parameters' denotes parameters are confibrurable.
+			'routeMap' denotes routemap is configurable."
+		 ::= { snBgp4Gen 42 }
+
+	 snBgp4GenDampenHalfLife OBJECT-TYPE
+		 SYNTAX   INTEGER (1..45)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Dampening Half Life."
+		 ::= { snBgp4Gen 43 }
+
+	 snBgp4GenDampenReuse OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Dampening Reuse."
+		 ::= { snBgp4Gen 44 }
+
+	 snBgp4GenDampenSuppress OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Dampening Suppress."
+		 ::= { snBgp4Gen 45 }
+
+	 snBgp4GenDampenMaxSuppress OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Dampening Max Suppress Time."
+		 ::= { snBgp4Gen 46 }
+
+	 snBgp4GenDampenMap OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..32))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the route-map name for dampening, each character of the name
+			is represented by one octet."
+		 ::= { snBgp4Gen 47 }
+
+	 snBgp4GenLocalAs4 OBJECT-TYPE
+		 SYNTAX   InetAutonomousSystemNumber
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"BGP4 local autonomous system (AS) number to support 4 byte AS format."
+		 ::= { snBgp4Gen 48 }
+
+	 snBgp4GenDefaultMetric1 OBJECT-TYPE
+		 SYNTAX   Unsigned32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To set default metric values for the BGP4 protocol."
+		 ::= { snBgp4Gen 49 }
+
+	 snBgp4GenDefaultLocalPreference1 OBJECT-TYPE
+		 SYNTAX   Unsigned32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To set the default local preference attribute."
+		 ::= { snBgp4Gen 50 }
+
+--- Bgp4 Address Filter table
+
+snBgp4AddrFilterTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4AddrFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Address Filter table."
+	::= { snBgp4AddrFilter 1 }
+
+snBgp4AddrFilterEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4AddrFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Address Filter table."
+	INDEX   { snBgp4AddrFilterIndex }
+	::= { snBgp4AddrFilterTable 1 }
+
+SnBgp4AddrFilterEntry ::= SEQUENCE {
+	snBgp4AddrFilterIndex
+		Integer32,
+	snBgp4AddrFilterAction
+		INTEGER,
+	snBgp4AddrFilterSourceIp
+		IpAddress,
+	snBgp4AddrFilterSourceMask
+		IpAddress,
+	snBgp4AddrFilterDestIp
+		IpAddress,
+	snBgp4AddrFilterDestMask
+		IpAddress,
+	snBgp4AddrFilterRowStatus
+		INTEGER
+	}
+
+snBgp4AddrFilterIndex       OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The table index for a filter entry."
+	::= { snBgp4AddrFilterEntry 1 }
+
+snBgp4AddrFilterAction      OBJECT-TYPE
+	SYNTAX  INTEGER { deny(0), permit(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Action to take if the bgp address match
+		with this filter."
+	::= { snBgp4AddrFilterEntry 2 }
+
+snBgp4AddrFilterSourceIp    OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Source IP address."
+	::= { snBgp4AddrFilterEntry 3 }
+
+snBgp4AddrFilterSourceMask  OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Source IP subnet mask."
+	::= { snBgp4AddrFilterEntry 4 }
+
+snBgp4AddrFilterDestIp      OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Destination IP address."
+	::= { snBgp4AddrFilterEntry 5 }
+
+snBgp4AddrFilterDestMask    OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Destination IP subnet mask."
+	::= { snBgp4AddrFilterEntry 6 }
+
+snBgp4AddrFilterRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4AddrFilterEntry 7 }
+
+-- Bgp4 Aggregate Address table
+
+snBgp4AggregateAddrTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4AggregateAddrEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Aggregate Address table."
+	::= { snBgp4AggregateAddr 1 }
+
+snBgp4AggregateAddrEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4AggregateAddrEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Aggregate Address table."
+	INDEX   { snBgp4AggregateAddrIp, snBgp4AggregateAddrMask, snBgp4AggregateAddrOption }
+	::= { snBgp4AggregateAddrTable 1 }
+
+SnBgp4AggregateAddrEntry ::= SEQUENCE {
+	snBgp4AggregateAddrIp
+		IpAddress,
+	snBgp4AggregateAddrMask
+		IpAddress,
+	snBgp4AggregateAddrOption
+		INTEGER,
+	snBgp4AggregateAddrMap
+		OCTET STRING,
+	snBgp4AggregateAddrRowStatus
+		INTEGER
+	}
+
+snBgp4AggregateAddrIp    OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"Aggregate Address IP address."
+	::= { snBgp4AggregateAddrEntry 1 }
+
+snBgp4AggregateAddrMask  OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"Aggregate Address IP subnet mask."
+	::= { snBgp4AggregateAddrEntry 2 }
+
+snBgp4AggregateAddrOption      OBJECT-TYPE
+	SYNTAX  INTEGER {
+				address(1),
+				asSet(2),
+				summaryOnly(3),
+				suppressMap(4),
+				advertiseMap(5),
+				attributeMap(6)
+				}
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"address(1), asSet(2), summaryOnly(3),
+		the suppressMap(4), advertiseMap(5),
+		attributeMap(6) are Options for creating an aggregate entry
+		in a BGP routing table."
+	::= { snBgp4AggregateAddrEntry 3 }
+
+snBgp4AggregateAddrMap      OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"This object associates with the snBgp4AggregateAddrOption and
+		the suppressMap(4), advertiseMap(5), attributeMap(6) of the
+		snBgp4AggregateAddrOption are only two Options for creating
+		an aggregate address map. A SNMP-SET error will be returned
+		for other options.  An octet string of the map name,
+		each character of the name is represented by one octet."
+	::= { snBgp4AggregateAddrEntry 4 }
+
+snBgp4AggregateAddrRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4AggregateAddrEntry 5 }
+
+-- Bgp4 AS-Path Filter table
+
+snBgp4AsPathFilterTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4AsPathFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 AS-Path Filter table."
+	::= { snBgp4AsPathFilter 1 }
+
+snBgp4AsPathFilterEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4AsPathFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 As-path Filter table."
+	INDEX   { snBgp4AsPathFilterIndex }
+	::= { snBgp4AsPathFilterTable 1 }
+
+SnBgp4AsPathFilterEntry ::= SEQUENCE {
+	snBgp4AsPathFilterIndex
+		Integer32,
+	snBgp4AsPathFilterAction
+		INTEGER,
+	snBgp4AsPathFilterRegExpression
+		OCTET STRING,
+	snBgp4AsPathFilterRowStatus
+		INTEGER
+	}
+
+snBgp4AsPathFilterIndex       OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The table index for a filter entry."
+	::= { snBgp4AsPathFilterEntry 1 }
+
+snBgp4AsPathFilterAction      OBJECT-TYPE
+	SYNTAX  INTEGER { deny(0), permit(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Action to take if the bgp address match
+		with this filter."
+	::= { snBgp4AsPathFilterEntry 2 }
+
+snBgp4AsPathFilterRegExpression    OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..256))
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Autonomous system in the filter using a regular expression.
+		Each character of the regular expression string is represented
+		by one octet."
+	::= { snBgp4AsPathFilterEntry 3 }
+
+snBgp4AsPathFilterRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4AsPathFilterEntry 4 }
+
+
+-- Bgp4 Community Filter table
+
+snBgp4CommunityFilterTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4CommunityFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Community Filter table."
+	::= { snBgp4CommunityFilter 1 }
+
+snBgp4CommunityFilterEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4CommunityFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Community Filter table."
+	INDEX   { snBgp4CommunityFilterIndex }
+	::= { snBgp4CommunityFilterTable 1 }
+
+SnBgp4CommunityFilterEntry ::= SEQUENCE {
+	snBgp4CommunityFilterIndex
+		Integer32,
+	snBgp4CommunityFilterAction
+		INTEGER,
+	snBgp4CommunityFilterCommNum
+		OCTET STRING,
+	snBgp4CommunityFilterInternet
+		INTEGER,
+	snBgp4CommunityFilterNoAdvertise
+		INTEGER,
+	snBgp4CommunityFilterNoExport
+		INTEGER,
+	snBgp4CommunityFilterRowStatus
+		INTEGER,
+	snBgp4CommunityFilterLocalAs
+		INTEGER
+	}
+
+snBgp4CommunityFilterIndex       OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The table index for a filter entry."
+	::= { snBgp4CommunityFilterEntry 1 }
+
+snBgp4CommunityFilterAction      OBJECT-TYPE
+	SYNTAX  INTEGER { deny(0), permit(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Action to take if the bgp address match
+		with this filter."
+	::= { snBgp4CommunityFilterEntry 2 }
+
+snBgp4CommunityFilterCommNum    OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..80))
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"A number from 1 to 0xFFFFFFFF. There are 20 of them.
+		This integer number is represented by 4 OCTETs."
+	::= { snBgp4CommunityFilterEntry 3 }
+
+snBgp4CommunityFilterInternet OBJECT-TYPE
+	SYNTAX  INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Disabled/Enabled the Internet Community."
+	::= { snBgp4CommunityFilterEntry 4 }
+
+snBgp4CommunityFilterNoAdvertise OBJECT-TYPE
+	SYNTAX  INTEGER { false(0), true(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Do not advertise this route to any peer (internal or external)."
+	::= { snBgp4CommunityFilterEntry 5 }
+
+snBgp4CommunityFilterNoExport OBJECT-TYPE
+	SYNTAX  INTEGER { false(0), true(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Do not advertise this route to an EBGP peer."
+	::= { snBgp4CommunityFilterEntry 6 }
+
+snBgp4CommunityFilterRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4CommunityFilterEntry 7 }
+
+snBgp4CommunityFilterLocalAs OBJECT-TYPE
+	SYNTAX  INTEGER { false(0), true(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Send this route to peers in other sub-autonomous systems within
+		the local confederation. Do not advertise this route to an
+		external system."
+	::= { snBgp4CommunityFilterEntry 8 }
+
+-- Bgp4 Neighbor General Configuration Table
+
+snBgp4NeighGenCfgTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighGenCfgEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor General Configuration table."
+	::= { snBgp4NeighGenCfg 1 }
+
+snBgp4NeighGenCfgEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighGenCfgEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Community Filter table."
+	INDEX   { snBgp4NeighGenCfgNeighIp }
+	::= { snBgp4NeighGenCfgTable 1 }
+
+SnBgp4NeighGenCfgEntry ::= SEQUENCE {
+	snBgp4NeighGenCfgNeighIp
+		IpAddress,
+	snBgp4NeighGenCfgAdvertlevel
+		INTEGER,
+	snBgp4NeighGenCfgDefOriginate
+		INTEGER,
+	snBgp4NeighGenCfgEbgpMultihop
+		INTEGER,
+	snBgp4NeighGenCfgMaxPrefix
+		Integer32,
+	snBgp4NeighGenCfgNextHopSelf
+		INTEGER,
+	snBgp4NeighGenCfgRemoteAs
+		INTEGER,
+	snBgp4NeighGenCfgSendComm
+		INTEGER,
+	snBgp4NeighGenCfgWeight
+		INTEGER,
+	snBgp4NeighGenCfgWeightFilterList
+		OCTET STRING,
+	snBgp4NeighGenCfgRowStatus
+		INTEGER,
+	snBgp4NeighGenCfgUpdateSrcLpbIntf
+		INTEGER,
+	snBgp4NeighGenCfgRouteRefClient
+		INTEGER,
+	snBgp4NeighGenCfgRemovePrivateAs
+		INTEGER,
+	snBgp4NeighGenCfgEbgpMultihopTtl
+		INTEGER,
+	snBgp4NeighGenCfgShutdown
+		INTEGER,
+	snBgp4NeighGenCfgKeepAliveTime
+		INTEGER,
+	snBgp4NeighGenCfgHoldTime
+		INTEGER,
+	snBgp4NeighGenCfgDefOrigMap
+		OCTET STRING,
+	snBgp4NeighGenCfgDesc
+		OCTET STRING,
+	snBgp4NeighGenCfgPass
+		OCTET STRING
+	}
+
+snBgp4NeighGenCfgNeighIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighGenCfgEntry 1 }
+
+snBgp4NeighGenCfgAdvertlevel   OBJECT-TYPE
+	SYNTAX  INTEGER (0..600)
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"To set the minimum interval between the
+		sending of BGP routing updates."
+	::= { snBgp4NeighGenCfgEntry 2 }
+
+snBgp4NeighGenCfgDefOriginate OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To enable/disable the default originate for this neighbor."
+	::= { snBgp4NeighGenCfgEntry 3 }
+
+snBgp4NeighGenCfgEbgpMultihop    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To enable/disable the EBGP Muitihop for this neighbor."
+	::= { snBgp4NeighGenCfgEntry 4 }
+
+snBgp4NeighGenCfgMaxPrefix    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To control how many prefixes can be received from a neighbor.
+	   The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue.
+	   The maximum value of the maximum prefix is snBgp4GenOperRoutes."
+	::= { snBgp4NeighGenCfgEntry 5 }
+
+snBgp4NeighGenCfgNextHopSelf    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To enable/disable the next-hop processing of BGP updates on the router."
+	::= { snBgp4NeighGenCfgEntry 6 }
+
+snBgp4NeighGenCfgRemoteAs    OBJECT-TYPE
+	SYNTAX   INTEGER (1..65535)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To specify a neighbor with an autonomous system number(AS)."
+	::= { snBgp4NeighGenCfgEntry 7 }
+
+snBgp4NeighGenCfgSendComm    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To specify that a COMMUNITES attribute should be sent to a BGP neighbor."
+	::= { snBgp4NeighGenCfgEntry 8 }
+
+snBgp4NeighGenCfgWeight    OBJECT-TYPE
+	SYNTAX   INTEGER (0..65535)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To assign a weight to a neighbor connection."
+	::= { snBgp4NeighGenCfgEntry 9 }
+
+snBgp4NeighGenCfgWeightFilterList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighGenCfgEntry 10 }
+
+snBgp4NeighGenCfgRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5),
+		applyDefault(6)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+	 applyDefault(6)...apply default value to an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NeighGenCfgEntry 11 }
+
+snBgp4NeighGenCfgUpdateSrcLpbIntf    OBJECT-TYPE
+	SYNTAX   INTEGER (0..8)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To allow internal BGP sessions to use any operational
+	   loopback interface (1..8) for TCP connections.  Zero
+	   interface means to restore the interface assignment to the
+	   closest interface, which is called the best local address."
+	::= { snBgp4NeighGenCfgEntry 12 }
+
+
+snBgp4NeighGenCfgRouteRefClient    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To configure the router as a BGP route reflector,
+	   enable the specified neighbor as its client.
+	   When all the clients are disabled, the local router
+	   is no longer a route reflector."
+	::= { snBgp4NeighGenCfgEntry 13 }
+
+snBgp4NeighGenCfgRemovePrivateAs    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To enable/disable filtering private AS number."
+	::= { snBgp4NeighGenCfgEntry 14 }
+
+snBgp4NeighGenCfgEbgpMultihopTtl    OBJECT-TYPE
+	SYNTAX   INTEGER (0..255)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "The EBGP Muitihop TTL for this neighbor."
+	::= { snBgp4NeighGenCfgEntry 15 }
+
+snBgp4NeighGenCfgShutdown    OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To enable/disable BGP4 Nbr Shutdown."
+	::= { snBgp4NeighGenCfgEntry 16 }
+
+snBgp4NeighGenCfgKeepAliveTime OBJECT-TYPE
+		 SYNTAX   INTEGER (0..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The Keep alive timer."
+	::= { snBgp4NeighGenCfgEntry 17 }
+
+snBgp4NeighGenCfgHoldTime OBJECT-TYPE
+		 SYNTAX   INTEGER (0..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The Hold time timer."
+	::= { snBgp4NeighGenCfgEntry 18 }
+
+snBgp4NeighGenCfgDefOrigMap OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..32))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the route-map name, each character of the name
+			is represented by one octet."
+	::= { snBgp4NeighGenCfgEntry 19 }
+
+snBgp4NeighGenCfgDesc OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..80))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the neighbor description."
+	::= { snBgp4NeighGenCfgEntry 20 }
+
+snBgp4NeighGenCfgPass OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..80))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the neighbor Md5 password."
+	::= { snBgp4NeighGenCfgEntry 21 }
+
+-- Bgp4 Neighbor Distribute Group Table
+
+snBgp4NeighDistGroupTable    OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighDistGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor Distribute Group table."
+	::= { snBgp4NeighDistGroup 1 }
+
+snBgp4NeighDistGroupEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighDistGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Distribute Group table."
+	INDEX   { snBgp4NeighDistGroupNeighIp, snBgp4NeighDistGroupDir }
+	::= { snBgp4NeighDistGroupTable 1 }
+
+SnBgp4NeighDistGroupEntry ::= SEQUENCE {
+	snBgp4NeighDistGroupNeighIp
+		IpAddress,
+	snBgp4NeighDistGroupDir
+		INTEGER,
+	snBgp4NeighDistGroupAccessList
+		OCTET STRING,
+	snBgp4NeighDistGroupRowStatus
+		INTEGER,
+	snBgp4NeighDistGroupInFilterList
+		OCTET STRING,
+	snBgp4NeighDistGroupOutFilterList
+		OCTET STRING,
+	snBgp4NeighDistGroupInIpAccessList
+		OCTET STRING,
+	snBgp4NeighDistGroupOutIpAccessList
+		OCTET STRING,
+	snBgp4NeighDistGroupInPrefixList
+		OCTET STRING,
+	snBgp4NeighDistGroupOutPrefixList
+		OCTET STRING
+	}
+
+snBgp4NeighDistGroupNeighIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighDistGroupEntry 1 }
+
+snBgp4NeighDistGroupDir   OBJECT-TYPE
+	SYNTAX  INTEGER { out(0), in(1) }
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The incoming/outgoing advertisements to which
+		the access list is applied."
+	::= { snBgp4NeighDistGroupEntry 2 }
+
+snBgp4NeighDistGroupAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighDistGroupEntry 3 }
+
+snBgp4NeighDistGroupRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NeighDistGroupEntry 4 }
+
+snBgp4NeighDistGroupInFilterList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighDistGroupEntry 5 }
+
+snBgp4NeighDistGroupOutFilterList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighDistGroupEntry 6 }
+
+snBgp4NeighDistGroupInIpAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..2))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 1 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighDistGroupEntry 7 }
+
+snBgp4NeighDistGroupOutIpAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..2))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 1 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighDistGroupEntry 8 }
+
+snBgp4NeighDistGroupInPrefixList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A Prefix name list. "
+	::= { snBgp4NeighDistGroupEntry 9 }
+
+snBgp4NeighDistGroupOutPrefixList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A Prefix name list. "
+	::= { snBgp4NeighDistGroupEntry 10 }
+
+-- Bgp4 Neighbor Filter Group Table
+
+snBgp4NeighFilterGroupTable    OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighFilterGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor Filter Group table."
+	::= { snBgp4NeighFilterGroup 1 }
+
+snBgp4NeighFilterGroupEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighFilterGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Neighbor Filter Group table."
+	INDEX   { snBgp4NeighFilterGroupNeighIp, snBgp4NeighFilterGroupDir }
+	::= { snBgp4NeighFilterGroupTable 1 }
+
+SnBgp4NeighFilterGroupEntry ::= SEQUENCE {
+	snBgp4NeighFilterGroupNeighIp
+		IpAddress,
+	snBgp4NeighFilterGroupDir
+		INTEGER,
+	snBgp4NeighFilterGroupAccessList
+		OCTET STRING,
+	snBgp4NeighFilterGroupRowStatus
+		INTEGER,
+	snBgp4NeighFilterGroupInFilterList
+		OCTET STRING,
+	snBgp4NeighFilterGroupOutFilterList
+		OCTET STRING,
+	snBgp4NeighFilterGroupInAsPathAccessList
+		OCTET STRING,
+	snBgp4NeighFilterGroupOutAsPathAccessList
+		OCTET STRING,
+	snBgp4NeighFilterGroupWeight
+		INTEGER,
+	snBgp4NeighFilterGroupWeightAccessList
+		OCTET STRING
+	}
+
+snBgp4NeighFilterGroupNeighIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighFilterGroupEntry 1 }
+
+snBgp4NeighFilterGroupDir   OBJECT-TYPE
+	SYNTAX  INTEGER { out(0), in(1) }
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The incoming/outgoing advertisements to which
+		the access list is applied."
+	::= { snBgp4NeighFilterGroupEntry 2 }
+
+snBgp4NeighFilterGroupAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 3 }
+
+snBgp4NeighFilterGroupRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NeighFilterGroupEntry 4 }
+
+snBgp4NeighFilterGroupInFilterList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 5 }
+
+snBgp4NeighFilterGroupOutFilterList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 16 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 6 }
+
+snBgp4NeighFilterGroupInAsPathAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..2))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 1 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 7 }
+
+snBgp4NeighFilterGroupOutAsPathAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..2))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 1 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 8 }
+
+snBgp4NeighFilterGroupWeight OBJECT-TYPE
+	SYNTAX   INTEGER  (0..65535)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To assign a weight to a neighbor filter."
+	::= { snBgp4NeighFilterGroupEntry 9 }
+
+snBgp4NeighFilterGroupWeightAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..2))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "A number from 1 to 0xFFFF. There are 1 of them.
+		This integer number is represented by 2 OCTETs."
+	::= { snBgp4NeighFilterGroupEntry 10 }
+
+-- Bgp4 Neighbor Route Map Table
+
+snBgp4NeighRouteMapTable    OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighRouteMapEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor Route Map table."
+	::= { snBgp4NeighRouteMap 1 }
+
+snBgp4NeighRouteMapEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighRouteMapEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Route Map table."
+	INDEX   { snBgp4NeighRouteMapNeighIp, snBgp4NeighRouteMapDir }
+	::= { snBgp4NeighRouteMapTable 1 }
+
+SnBgp4NeighRouteMapEntry ::= SEQUENCE {
+	snBgp4NeighRouteMapNeighIp
+		IpAddress,
+	snBgp4NeighRouteMapDir
+		INTEGER,
+	snBgp4NeighRouteMapMapName
+		OCTET STRING,
+	snBgp4NeighRouteMapRowStatus
+		INTEGER
+	}
+
+snBgp4NeighRouteMapNeighIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighRouteMapEntry 1 }
+
+snBgp4NeighRouteMapDir   OBJECT-TYPE
+	SYNTAX  INTEGER { out(0), in(1) }
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The incoming/outgoing advertisements to which
+		the access list is applied."
+	::= { snBgp4NeighRouteMapEntry 2 }
+
+snBgp4NeighRouteMapMapName OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "An octet string of the route-map name, Each character of the name
+		is represented by one octet."
+	::= { snBgp4NeighRouteMapEntry 3 }
+
+snBgp4NeighRouteMapRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NeighRouteMapEntry 4 }
+
+
+-- Bgp4 Network Table
+
+snBgp4NetworkTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NetworkEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Network Weight table."
+	::= { snBgp4Network 1 }
+
+snBgp4NetworkEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NetworkEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Network Weight table."
+	INDEX   { snBgp4NetworkIp, snBgp4NetworkSubnetMask }
+	::= { snBgp4NetworkTable 1 }
+
+SnBgp4NetworkEntry ::= SEQUENCE {
+	snBgp4NetworkIp
+		IpAddress,
+	snBgp4NetworkSubnetMask
+		IpAddress,
+	snBgp4NetworkWeight
+		INTEGER,
+	snBgp4NetworkBackdoor
+		INTEGER,
+	snBgp4NetworkRowStatus
+		INTEGER
+	}
+
+snBgp4NetworkIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a network entry."
+	::= { snBgp4NetworkEntry 1 }
+
+snBgp4NetworkSubnetMask OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The subnet mask for a network entry."
+	::= { snBgp4NetworkEntry 2 }
+
+snBgp4NetworkWeight    OBJECT-TYPE
+	SYNTAX   INTEGER  (0..65535)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To assign a weight to a neighbor connection."
+	::= { snBgp4NetworkEntry 3 }
+
+snBgp4NetworkBackdoor   OBJECT-TYPE
+	SYNTAX  INTEGER { disabled (0), enabled (1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+	   "To enable/disable the backdoor for this network."
+	::= { snBgp4NetworkEntry 4 }
+
+snBgp4NetworkRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NetworkEntry 5 }
+
+--  BGP4 Redistribution of Routes Table
+
+
+	 snBgp4RedisTable OBJECT-TYPE
+		 SYNTAX   SEQUENCE OF SnBgp4RedisEntry
+		 MAX-ACCESS   not-accessible
+		 STATUS   current
+		 DESCRIPTION
+			"The BGP4 Redistribution contains configurations
+			that could be imported into the BGP4 domain."
+		 ::= { snBgp4Redis 1 }
+
+	 snBgp4RedisEntry OBJECT-TYPE
+		 SYNTAX   SnBgp4RedisEntry
+		 MAX-ACCESS   not-accessible
+		 STATUS   current
+		 DESCRIPTION
+			"The BGP4 Redistribution Entry specifies a particular RIP
+			or , OSPF, or Static route to be imported into the BGP4 domain."
+		 INDEX { snBgp4RedisProtocol }
+		 ::= { snBgp4RedisTable 1 }
+
+	 SnBgp4RedisEntry ::=
+		 SEQUENCE {
+			 snBgp4RedisProtocol
+				 INTEGER,
+			 snBgp4RedisMetric
+				 Integer32,
+			 snBgp4RedisRouteMap
+				 OCTET STRING,
+			 snBgp4RedisWeight
+				 INTEGER,
+			 snBgp4RedisMatchInternal
+				 INTEGER,
+			 snBgp4RedisMatchExternal1
+				 INTEGER,
+			 snBgp4RedisMatchExternal2
+				 INTEGER,
+			 snBgp4RedisRowStatus
+				 INTEGER
+		 }
+
+
+	snBgp4RedisProtocol OBJECT-TYPE
+		 SYNTAX   INTEGER {
+			rip(1),
+			ospf(2),
+			static(3),
+			connected(4),
+			isis(5)
+				  }
+		 MAX-ACCESS   read-only
+		 STATUS   current
+		 DESCRIPTION
+			"The imported configuration into BGP4 domain is set in the following:
+				rip(1):		- the RIP.
+				ospf(2):	- the OSPF.
+				static(3):	- the static.
+				connected(4):	- the connected.
+				isis(5):	- the ISIS."
+		 ::= { snBgp4RedisEntry 1 }
+
+	snBgp4RedisMetric OBJECT-TYPE
+		 SYNTAX   Integer32
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"The metric of using the specified protocol Metric value."
+		 ::= { snBgp4RedisEntry 2 }
+
+
+	snBgp4RedisRouteMap OBJECT-TYPE
+		 SYNTAX  OCTET STRING (SIZE(0..32))
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"An octet string of the route-map name, each character of the name
+			is represented by one octet."
+		 ::= { snBgp4RedisEntry 3 }
+
+	snBgp4RedisWeight OBJECT-TYPE
+		 SYNTAX   INTEGER (0..65535)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"To assign a weight for the specified protocol."
+		 ::= { snBgp4RedisEntry 4 }
+
+	snBgp4RedisMatchInternal OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"This object is only applicable to the OSPF protocol."
+		 ::= { snBgp4RedisEntry 5 }
+
+	snBgp4RedisMatchExternal1 OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"This object is only applicable to the OSPF protocol."
+		 ::= { snBgp4RedisEntry 6 }
+
+	snBgp4RedisMatchExternal2 OBJECT-TYPE
+		 SYNTAX   INTEGER { disabled(0), enabled(1) }
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+			"This object is only applicable to the OSPF protocol."
+		 ::= { snBgp4RedisEntry 7 }
+
+	snBgp4RedisRowStatus   OBJECT-TYPE
+		 SYNTAX	 INTEGER {
+			invalid(1),
+			valid(2),
+			delete(3),
+			create(4),
+			modify(5)
+		 }
+		 MAX-ACCESS	 read-write
+		 STATUS	 current
+		 DESCRIPTION
+			"This object is used to create and
+			delete row in the table and control
+			if they are used. The values
+			that can be written are:
+			delete(3)...deletes the row
+			create(4)...creates a new row
+			modify(5)...modifies an exsisting row
+
+			If the row exists, then a SET with
+			value of create(4) returns error
+			'badValue'. Deleted rows go away
+			immediately. The following values
+			can be returned on reads:
+			noSuch(0)...no such row
+			invalid(1)...Setting it to 'invalid' has the effect of
+						 rendering it inoperative..
+			valid(2)....the row exists and is valid"
+		 ::= { snBgp4RedisEntry 8 }
+
+-- Bgp4 Route Map Filter table
+
+snBgp4RouteMapFilterTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4RouteMapFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 RouteMap Filter table."
+	::= { snBgp4RouteMapFilter 1 }
+
+snBgp4RouteMapFilterEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4RouteMapFilterEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 RouteMap Filter table."
+	INDEX   { snBgp4RouteMapFilterMapName, snBgp4RouteMapFilterSequenceNum}
+	::= { snBgp4RouteMapFilterTable 1 }
+
+SnBgp4RouteMapFilterEntry ::= SEQUENCE {
+	snBgp4RouteMapFilterMapName
+		OCTET STRING,
+	snBgp4RouteMapFilterSequenceNum
+		Integer32,
+	snBgp4RouteMapFilterAction
+		INTEGER,
+	snBgp4RouteMapFilterRowStatus
+		INTEGER
+	}
+
+snBgp4RouteMapFilterMapName    OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"An octet string of the route-map name, each character of the name
+		 is represented by one octet."
+	::= { snBgp4RouteMapFilterEntry 1 }
+
+snBgp4RouteMapFilterSequenceNum OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"A sequence number for this particular route-map."
+	::= { snBgp4RouteMapFilterEntry 2 }
+
+snBgp4RouteMapFilterAction      OBJECT-TYPE
+	SYNTAX  INTEGER { deny(0), permit(1) }
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Action to take if the bgp address match
+		with this filter."
+	::= { snBgp4RouteMapFilterEntry 3 }
+
+snBgp4RouteMapFilterRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4RouteMapFilterEntry 4 }
+
+
+--  BGP4 Route Map Match Configuration Table
+
+
+snBgp4RouteMapMatchTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4RouteMapMatchEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Route Map Set table."
+	::= { snBgp4RouteMapMatch 1 }
+
+snBgp4RouteMapMatchEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4RouteMapMatchEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Route Map Match table."
+	INDEX   { snBgp4RouteMapMatchMapName, snBgp4RouteMapMatchSequenceNum }
+	::= { snBgp4RouteMapMatchTable 1 }
+
+SnBgp4RouteMapMatchEntry ::= SEQUENCE {
+	snBgp4RouteMapMatchMapName
+		OCTET STRING,
+	snBgp4RouteMapMatchSequenceNum
+		Integer32,
+	snBgp4RouteMapMatchAsPathFilter
+		OCTET STRING,
+	snBgp4RouteMapMatchCommunityFilter
+		OCTET STRING,
+	snBgp4RouteMapMatchAddressFilter
+		OCTET STRING,
+	snBgp4RouteMapMatchMetric
+		Integer32,
+	snBgp4RouteMapMatchNextHopList
+		OCTET STRING,
+	snBgp4RouteMapMatchRouteType
+		INTEGER,
+	snBgp4RouteMapMatchTagList
+		OCTET STRING,
+	snBgp4RouteMapMatchRowMask
+		Integer32,
+	snBgp4RouteMapMatchAsPathAccessList
+		OCTET STRING,
+	snBgp4RouteMapMatchCommunityList
+		OCTET STRING,
+	snBgp4RouteMapMatchAddressAccessList
+		OCTET STRING,
+	snBgp4RouteMapMatchAddressPrefixList
+		OCTET STRING,
+	snBgp4RouteMapMatchNextHopAccessList
+		OCTET STRING,
+	snBgp4RouteMapMatchNextHopPrefixList
+		OCTET STRING
+	}
+
+snBgp4RouteMapMatchMapName    OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"An octet string of the route-map name, each character of the name
+		 is represented by one octet."
+	::= { snBgp4RouteMapMatchEntry 1 }
+
+snBgp4RouteMapMatchSequenceNum OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"A sequence number for this particular route-map."
+	::= { snBgp4RouteMapMatchEntry 2 }
+
+snBgp4RouteMapMatchAsPathFilter OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..20))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP autonomous system path access list."
+	::= { snBgp4RouteMapMatchEntry 3 }
+
+snBgp4RouteMapMatchCommunityFilter OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..20))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP community access list."
+	::= { snBgp4RouteMapMatchEntry 4 }
+
+snBgp4RouteMapMatchAddressFilter OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..20))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP address access list."
+	::= { snBgp4RouteMapMatchEntry 5 }
+
+snBgp4RouteMapMatchMetric OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To match a metric for BGP routes."
+	::= { snBgp4RouteMapMatchEntry 6 }
+
+snBgp4RouteMapMatchNextHopList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 16 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP next-hop access list."
+	::= { snBgp4RouteMapMatchEntry 7 }
+
+snBgp4RouteMapMatchRouteType OBJECT-TYPE
+	SYNTAX   INTEGER {
+				none(0),
+				external(1),
+				externalType1(2),
+				externalType2(3),
+				internal(4),
+				local(5)
+				}
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To match a route-type.
+		Currently only externalType1(2),
+		externalType2(3), internal(4) is supported for SNMP-SET."
+	::= { snBgp4RouteMapMatchEntry 8 }
+
+snBgp4RouteMapMatchTagList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To match a BGP tag access list."
+	::= { snBgp4RouteMapMatchEntry 9 }
+
+snBgp4RouteMapMatchRowMask   OBJECT-TYPE
+	SYNTAX	 Integer32
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used together with above
+	 MIBs in the same VARBIND to set and
+	 reset any MIBs in the table.
+	 The bit number is referred to the
+	 snBgp4RouteMapMatchEntry number
+	 of each row in the table.
+	 The bit is ON  - means set,
+	 The bit is OFF - means reset"
+	::= { snBgp4RouteMapMatchEntry 10 }
+
+snBgp4RouteMapMatchAsPathAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..20))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
+		This integer number is represented by 4 OCTETs.
+		To match a BGP autonomous system path access list."
+	::= { snBgp4RouteMapMatchEntry 11 }
+
+snBgp4RouteMapMatchCommunityList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..20))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
+		This integer number is represented by 4 OCTETs.
+		To match a BGP community access list."
+	::= { snBgp4RouteMapMatchEntry 12 }
+
+snBgp4RouteMapMatchAddressAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..10))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP address access list."
+	::= { snBgp4RouteMapMatchEntry 13 }
+
+snBgp4RouteMapMatchAddressPrefixList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..170))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"Prefix list
+		To match a BGP address access list."
+	::= { snBgp4RouteMapMatchEntry 14 }
+
+snBgp4RouteMapMatchNextHopAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..10))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
+		This integer number is represented by 2 OCTETs.
+		To match a BGP address access list."
+	::= { snBgp4RouteMapMatchEntry 15 }
+
+snBgp4RouteMapMatchNextHopPrefixList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..170))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"Prefix list
+		To match a BGP address access list."
+	::= { snBgp4RouteMapMatchEntry 16 }
+
+--  BGP4 Route Map Set Configuration Table
+
+snBgp4RouteMapSetTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4RouteMapSetEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Route Map Set table."
+	::= { snBgp4RouteMapSet 1 }
+
+snBgp4RouteMapSetEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4RouteMapSetEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Route Map Set table."
+	INDEX   { snBgp4RouteMapSetMapName, snBgp4RouteMapSetSequenceNum }
+	::= { snBgp4RouteMapSetTable 1 }
+
+SnBgp4RouteMapSetEntry ::= SEQUENCE {
+	snBgp4RouteMapSetMapName
+		OCTET STRING,
+	snBgp4RouteMapSetSequenceNum
+		Integer32,
+	snBgp4RouteMapSetAsPathType
+		INTEGER,
+	snBgp4RouteMapSetAsPathString
+		OCTET STRING,
+	snBgp4RouteMapSetAutoTag
+		INTEGER,
+	snBgp4RouteMapSetCommunityType
+		INTEGER,
+	snBgp4RouteMapSetCommunityNum
+		Integer32,
+	snBgp4RouteMapSetCommunityAdditive
+		INTEGER,
+	snBgp4RouteMapSetLocalPreference
+		Integer32,
+	snBgp4RouteMapSetMetric
+		Integer32,
+	snBgp4RouteMapSetNextHop
+		IpAddress,
+	snBgp4RouteMapSetOrigin
+		INTEGER,
+	snBgp4RouteMapSetTag
+		Integer32,
+	snBgp4RouteMapSetWeight
+		INTEGER,
+	snBgp4RouteMapSetRowMask
+		Integer32,
+	snBgp4RouteMapSetCommunityNums
+		OCTET STRING,
+	snBgp4RouteMapSetDampenHalfLife
+		INTEGER,
+	snBgp4RouteMapSetDampenReuse
+		INTEGER,
+	snBgp4RouteMapSetDampenSuppress
+		INTEGER,
+	snBgp4RouteMapSetDampenMaxSuppress
+		INTEGER
+	}
+
+snBgp4RouteMapSetMapName    OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"An octet string of the route-map name, each character of the name
+		 is represented by one octet."
+	::= { snBgp4RouteMapSetEntry 1 }
+
+snBgp4RouteMapSetSequenceNum OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"A sequence number for this particular route-map."
+	::= { snBgp4RouteMapSetEntry 2 }
+
+snBgp4RouteMapSetAsPathType OBJECT-TYPE
+	SYNTAX   INTEGER { tag(0), prepend(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To modify an autonomous system path for BGP routes.
+		tag(0) - Converts the tag of a route into an autonomous system path.
+		prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the
+					 as-path of the route that is matched by the route map."
+	::= { snBgp4RouteMapSetEntry 3 }
+
+snBgp4RouteMapSetAsPathString OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd
+		was sent together with the value set to prepend(1)."
+	::= { snBgp4RouteMapSetEntry 4 }
+
+snBgp4RouteMapSetAutoTag OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To enable/disable the automatic-tag for BGP routes."
+	::= { snBgp4RouteMapSetEntry 5 }
+
+snBgp4RouteMapSetCommunityType OBJECT-TYPE
+	SYNTAX   INTEGER { nums(0), none(3)}
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To set the BGP COMMUNITIES attribute. none means no other
+	 community attributes are allowed, nums means allowing community
+	 attributesi, the old values 1 and 2 are not valid since 5.03.00"
+	::= { snBgp4RouteMapSetEntry 6 }
+
+snBgp4RouteMapSetCommunityNum OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   deprecated
+	DESCRIPTION
+		"community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd
+		was sent together with the value set to number(0)."
+	::= { snBgp4RouteMapSetEntry 7 }
+
+snBgp4RouteMapSetCommunityAdditive OBJECT-TYPE
+	SYNTAX   INTEGER { disabled(0), enabled(1) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To add the community to the already existing communities."
+	::= { snBgp4RouteMapSetEntry 8 }
+
+snBgp4RouteMapSetLocalPreference OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To modify a local-preference for BGP routes."
+	::= { snBgp4RouteMapSetEntry 9 }
+
+snBgp4RouteMapSetMetric OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To modify a metric for BGP routes."
+	::= { snBgp4RouteMapSetEntry 10 }
+
+snBgp4RouteMapSetNextHop OBJECT-TYPE
+	SYNTAX   IpAddress
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To modify the IP address of the next hop for BGP routes."
+	::= { snBgp4RouteMapSetEntry 11 }
+
+snBgp4RouteMapSetOrigin OBJECT-TYPE
+	SYNTAX   INTEGER { igp(0), egp(1), incomplete(2) }
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To set the BGP origin code."
+	::= { snBgp4RouteMapSetEntry 12 }
+
+snBgp4RouteMapSetTag OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To specify the tag for BGP routes."
+	::= { snBgp4RouteMapSetEntry 13 }
+
+snBgp4RouteMapSetWeight OBJECT-TYPE
+	SYNTAX   INTEGER (0..65535)
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+		"To specify the BGP weight for the routing table."
+	::= { snBgp4RouteMapSetEntry 14 }
+
+snBgp4RouteMapSetRowMask   OBJECT-TYPE
+	SYNTAX	 Integer32
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used together with above
+	 MIBs in the same VARBIND to set and
+	 reset any MIBs in the table.
+	 The bit number is referred to the
+	 snBgp4RouteMapSetEntry number
+	 of each row in the table.
+	 The bit is ON  - means set,
+	 The bit is OFF - means reset"
+	::= { snBgp4RouteMapSetEntry 15 }
+
+snBgp4RouteMapSetCommunityNums OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..24))
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Community number is from 1 to 0xFFFFFFFF. There are 6 of them.
+		This integer number is represented by 4 OCTETs."
+	::= { snBgp4RouteMapSetEntry 16 }
+
+snBgp4RouteMapSetDampenHalfLife OBJECT-TYPE
+		 SYNTAX   INTEGER (1..45)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Route Map Dampening Half Life."
+	::= { snBgp4RouteMapSetEntry 17 }
+
+snBgp4RouteMapSetDampenReuse OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Route Map Dampening Reuse."
+	::= { snBgp4RouteMapSetEntry 18 }
+
+snBgp4RouteMapSetDampenSuppress OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Route Map Dampening Suppress."
+	::= { snBgp4RouteMapSetEntry 19 }
+
+snBgp4RouteMapSetDampenMaxSuppress OBJECT-TYPE
+		 SYNTAX   INTEGER (1..20000)
+		 MAX-ACCESS   read-write
+		 STATUS   current
+		 DESCRIPTION
+		"Bgp4 Route Map Dampening Max Suppress Time."
+	::= { snBgp4RouteMapSetEntry 20 }
+
+-- Bgp4 Neighbor Operational Status Table
+
+snBgp4NeighOperStatusTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighOperStatusEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor Operational Status table."
+	::= { snBgp4NeighOperStatus 1 }
+
+snBgp4NeighOperStatusEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighOperStatusEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Operational Status table."
+	INDEX   { snBgp4NeighOperStatusIndex }
+	::= { snBgp4NeighOperStatusTable 1 }
+
+SnBgp4NeighOperStatusEntry ::= SEQUENCE {
+	snBgp4NeighOperStatusIndex
+		Integer32,
+	snBgp4NeighOperStatusIp
+		IpAddress,
+	snBgp4NeighOperStatusRemoteAs
+		Integer32,
+	snBgp4NeighOperStatusBgpType
+		INTEGER,
+	snBgp4NeighOperStatusState
+		INTEGER,
+	snBgp4NeighOperStatusKeepAliveTime
+		Integer32,
+	snBgp4NeighOperStatusHoldTime
+		Integer32,
+	snBgp4NeighOperStatusAdvertlevel
+		Integer32,
+	snBgp4NeighOperStatusKeepAliveTxCounts
+		Counter32,
+	snBgp4NeighOperStatusKeepAliveRxCounts
+		Counter32,
+	snBgp4NeighOperStatusUpdateTxCounts
+		Counter32,
+	snBgp4NeighOperStatusUpdateRxCounts
+		Counter32,
+	snBgp4NeighOperStatusNotifTxCounts
+		Counter32,
+	snBgp4NeighOperStatusNotifRxCounts
+		Counter32,
+	snBgp4NeighOperStatusOpenTxCounts
+		Counter32,
+	snBgp4NeighOperStatusOpenRxCounts
+		Counter32
+	}
+
+snBgp4NeighOperStatusIndex   OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The index for a neighbor entry."
+	::= { snBgp4NeighOperStatusEntry 1 }
+
+snBgp4NeighOperStatusIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighOperStatusEntry 2 }
+
+snBgp4NeighOperStatusRemoteAs    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show a neighbor with an autonomous system number(AS)."
+	::= { snBgp4NeighOperStatusEntry 3 }
+
+snBgp4NeighOperStatusBgpType    OBJECT-TYPE
+	SYNTAX   INTEGER  { ebgp(0), ibgp(1) }
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the type of BGP protocol whether is internal or external."
+	::= { snBgp4NeighOperStatusEntry 4 }
+
+snBgp4NeighOperStatusState    OBJECT-TYPE
+	SYNTAX   INTEGER  {
+				noState(0),
+				idle(1),
+				connect(2),
+				active(3),
+				openSent(4),
+				openConfirm(5),
+				established(6)
+				}
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the state of this neighbor."
+	::= { snBgp4NeighOperStatusEntry 5 }
+
+snBgp4NeighOperStatusKeepAliveTime OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+		"The Keep alive timer."
+	::= { snBgp4NeighOperStatusEntry 6 }
+
+snBgp4NeighOperStatusHoldTime OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+		"The Hold time timer."
+	::= { snBgp4NeighOperStatusEntry 7 }
+
+snBgp4NeighOperStatusAdvertlevel   OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"To show the minimum interval between the
+		sending of BGP routing updates."
+	::= { snBgp4NeighOperStatusEntry 8 }
+
+snBgp4NeighOperStatusKeepAliveTxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Keep alive message sent counts."
+	::= { snBgp4NeighOperStatusEntry 9 }
+
+snBgp4NeighOperStatusKeepAliveRxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Keep alive message received counts."
+	::= { snBgp4NeighOperStatusEntry 10 }
+
+snBgp4NeighOperStatusUpdateTxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Update message sent counts."
+	::= { snBgp4NeighOperStatusEntry 11 }
+
+snBgp4NeighOperStatusUpdateRxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Update message received counts."
+	::= { snBgp4NeighOperStatusEntry 12 }
+
+snBgp4NeighOperStatusNotifTxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Notification message sent counts."
+	::= { snBgp4NeighOperStatusEntry 13 }
+
+snBgp4NeighOperStatusNotifRxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Notification message received counts."
+	::= { snBgp4NeighOperStatusEntry 14 }
+
+snBgp4NeighOperStatusOpenTxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Open message sent counts."
+	::= { snBgp4NeighOperStatusEntry 15 }
+
+snBgp4NeighOperStatusOpenRxCounts OBJECT-TYPE
+	SYNTAX   Counter32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "Open message received counts."
+	::= { snBgp4NeighOperStatusEntry 16 }
+
+-- Bgp4 Routes Operational Status Table
+
+snBgp4RouteOperStatusTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4RouteOperStatusEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Routebor Operational Status table."
+	::= { snBgp4RouteOperStatus 1 }
+
+snBgp4RouteOperStatusEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4RouteOperStatusEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Operational Status table."
+	INDEX   { snBgp4RouteOperStatusIndex }
+	::= { snBgp4RouteOperStatusTable 1 }
+
+SnBgp4RouteOperStatusEntry ::= SEQUENCE {
+	snBgp4RouteOperStatusIndex
+		Integer32,
+	snBgp4RouteOperStatusIp
+		IpAddress,
+	snBgp4RouteOperStatusSubnetMask
+		IpAddress,
+	snBgp4RouteOperStatusNextHop
+		IpAddress,
+	snBgp4RouteOperStatusMetric
+		Integer32,
+	snBgp4RouteOperStatusLocalPreference
+		Integer32,
+	snBgp4RouteOperStatusWeight
+		Integer32,
+	snBgp4RouteOperStatusOrigin
+		INTEGER,
+	snBgp4RouteOperStatusStatus
+		Integer32,
+	snBgp4RouteOperStatusRouteTag
+		Integer32,
+	snBgp4RouteOperStatusCommunityList
+		OCTET STRING,
+	snBgp4RouteOperStatusAsPathList
+		OCTET STRING
+	}
+
+snBgp4RouteOperStatusIndex   OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The index for a route entry."
+	::= { snBgp4RouteOperStatusEntry 1 }
+
+snBgp4RouteOperStatusIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a route entry."
+	::= { snBgp4RouteOperStatusEntry 2 }
+
+snBgp4RouteOperStatusSubnetMask       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Subnet Mask for a route entry."
+	::= { snBgp4RouteOperStatusEntry 3 }
+
+snBgp4RouteOperStatusNextHop       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The next-hop IP for a route entry."
+	::= { snBgp4RouteOperStatusEntry 4 }
+
+snBgp4RouteOperStatusMetric    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the metric value of a route entry."
+	::= { snBgp4RouteOperStatusEntry 5 }
+
+snBgp4RouteOperStatusLocalPreference    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the local preference of a route entry."
+	::= { snBgp4RouteOperStatusEntry 6 }
+
+snBgp4RouteOperStatusWeight    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the weight of this route."
+	::= { snBgp4RouteOperStatusEntry 7 }
+
+snBgp4RouteOperStatusOrigin    OBJECT-TYPE
+	SYNTAX   INTEGER  {
+				igp(0),
+				egp(1),
+				incomplete(2)
+			 }
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the origin of this route."
+	::= { snBgp4RouteOperStatusEntry 8 }
+
+snBgp4RouteOperStatusStatus    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "A bit array that contains the status of this route.
+	   This is a packed bit string; The following shows the
+	   meaning of each bit:
+		(bit 0 is the least significant bit and 0=FALSE, 1=TRUE).
+
+		  bit position   meaning
+		  ------------   -------
+			  6-31   reserved.
+			  5    	 aggregate.
+			  4      best.
+			  3      internal.
+			  2      local.
+			  1      suppressed.
+			  0      valid."
+	::= { snBgp4RouteOperStatusEntry 9 }
+
+snBgp4RouteOperStatusRouteTag    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the route tag of this route."
+	::= { snBgp4RouteOperStatusEntry 10 }
+
+snBgp4RouteOperStatusCommunityList    OBJECT-TYPE
+	SYNTAX   OCTET STRING
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the community list of this route.
+	   If the community list is an NULL string that means an empty list, then
+	   the community is INTERNET. A number from 1 to 0xFFFFFFFF.
+	   This integer number is represented by 4 OCTETs.
+	   In the community list, it could have some Well-known numbers such as:
+	   BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT		0xFFFFFF01
+	   BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE		0xFFFFFF02"
+	::= { snBgp4RouteOperStatusEntry 11 }
+
+
+snBgp4RouteOperStatusAsPathList    OBJECT-TYPE
+	SYNTAX   OCTET STRING
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the AS Path list of this route.
+	   A number from 1 to 0xFFFF.
+	   This integer number is represented by 2 OCTETs."
+	::= { snBgp4RouteOperStatusEntry 12 }
+
+-- Bgp4 Neighbor Summary Table
+
+snBgp4NeighborSummaryTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighborSummaryEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Routebor Operational Status table."
+	::= { snBgp4NeighborSummary 1 }
+
+snBgp4NeighborSummaryEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighborSummaryEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Operational Status table."
+	INDEX   { snBgp4NeighborSummaryIndex }
+	::= { snBgp4NeighborSummaryTable 1 }
+
+SnBgp4NeighborSummaryEntry ::= SEQUENCE {
+	snBgp4NeighborSummaryIndex
+		Integer32,
+	snBgp4NeighborSummaryIp
+		IpAddress,
+	snBgp4NeighborSummaryState
+		INTEGER,
+	snBgp4NeighborSummaryStateChgTime
+		Integer32,
+	snBgp4NeighborSummaryRouteReceived
+		Integer32,
+	snBgp4NeighborSummaryRouteInstalled
+		Integer32
+	}
+
+snBgp4NeighborSummaryIndex   OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The index for a route entry."
+	::= { snBgp4NeighborSummaryEntry 1 }
+
+snBgp4NeighborSummaryIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a route entry."
+	::= { snBgp4NeighborSummaryEntry 2 }
+
+snBgp4NeighborSummaryState    OBJECT-TYPE
+	SYNTAX   INTEGER  {
+				noState(0),
+				idle(1),
+				connect(2),
+				active(3),
+				openSent(4),
+				openConfirm(5),
+				established(6)
+				}
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the state of this neighbor."
+	::= { snBgp4NeighborSummaryEntry 3 }
+
+snBgp4NeighborSummaryStateChgTime OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+		"The time of a change of the state of this neighbor."
+	::= { snBgp4NeighborSummaryEntry 4 }
+
+snBgp4NeighborSummaryRouteReceived OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+		"The number of routes received of this neighbor."
+	::= { snBgp4NeighborSummaryEntry 5 }
+
+snBgp4NeighborSummaryRouteInstalled OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+		"The number of routes installed of this neighbor."
+	::= { snBgp4NeighborSummaryEntry 6 }
+
+-- Bgp4 Attribute Entries Table
+
+snBgp4AttributeTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4AttributeEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Attribute entries table."
+	::= { snBgp4Attribute 1 }
+
+snBgp4AttributeEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4AttributeEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Attribute table."
+	INDEX   { snBgp4AttributeIndex }
+	::= { snBgp4AttributeTable 1 }
+
+SnBgp4AttributeEntry ::= SEQUENCE {
+	snBgp4AttributeIndex
+		Integer32,
+	snBgp4AttributeNextHop
+		IpAddress,
+	snBgp4AttributeMetric
+		Integer32,
+	snBgp4AttributeOrigin
+		INTEGER,
+	snBgp4AttributeAggregatorAs
+		Integer32,
+	snBgp4AttributeRouterId
+		IpAddress,
+	snBgp4AttributeAtomicAggregatePresent
+		INTEGER,
+	snBgp4AttributeLocalPreference
+		Integer32,
+	snBgp4AttributeCommunityList
+		OCTET STRING,
+	snBgp4AttributeAsPathList
+		OCTET STRING,
+	snBgp4AttributeOriginator
+		IpAddress,
+	snBgp4AttributeClusterList
+		OCTET STRING
+	}
+
+snBgp4AttributeIndex   OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The index for a route entry."
+	::= { snBgp4AttributeEntry 1 }
+
+snBgp4AttributeNextHop       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The next-hop IP for a route entry."
+	::= { snBgp4AttributeEntry 2 }
+
+snBgp4AttributeMetric    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the metric value of a route entry."
+	::= { snBgp4AttributeEntry 3 }
+
+snBgp4AttributeOrigin    OBJECT-TYPE
+	SYNTAX   INTEGER  {
+				igp(0),
+				egp(1),
+				incomplete(2)
+			 }
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the origin of this route."
+	::= { snBgp4AttributeEntry 4 }
+
+snBgp4AttributeAggregatorAs    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "The aggregator AS number for an attribute entry."
+	::= { snBgp4AttributeEntry 5 }
+
+snBgp4AttributeRouterId       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The router ID for an attribute entry."
+	::= { snBgp4AttributeEntry 6 }
+
+snBgp4AttributeAtomicAggregatePresent    OBJECT-TYPE
+	SYNTAX   INTEGER { false(0), true(1) }
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "The atomic aggregate present in an attribute entry."
+	::= { snBgp4AttributeEntry 7 }
+
+snBgp4AttributeLocalPreference    OBJECT-TYPE
+	SYNTAX   Integer32
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the local preference of a route entry."
+	::= { snBgp4AttributeEntry 8 }
+
+snBgp4AttributeCommunityList    OBJECT-TYPE
+	SYNTAX   OCTET STRING
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the community list of this attribute entry.
+	   If the community list is an NULL string that means an empty list, then
+	   the community is INTERNET. A number from 1 to 0xFFFFFFFF.
+	   This integer number is represented by 4 OCTETs.
+	   In the community list, it could have some Well-known numbers such as:
+	   BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT		0xFFFFFF01
+	   BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE		0xFFFFFF02"
+	::= { snBgp4AttributeEntry 9 }
+
+
+snBgp4AttributeAsPathList    OBJECT-TYPE
+	SYNTAX   OCTET STRING
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the AS Path list of this attribute entry.
+	   A number from 1 to 0xFFFF.
+	   This integer number is represented by 2 OCTETs."
+	::= { snBgp4AttributeEntry 10 }
+
+snBgp4AttributeOriginator       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The originator IP address for an attribute entry."
+	::= { snBgp4AttributeEntry 11 }
+
+snBgp4AttributeClusterList    OBJECT-TYPE
+	SYNTAX   OCTET STRING
+	MAX-ACCESS   read-only
+	STATUS   current
+	DESCRIPTION
+	   "To show the cluster list of this attribute entry.
+	   If the cluster list is an NULL string, it means an empty list.
+	   Otherwise, the list is a group of cluster ID which is
+	   represented by 4 OCTETs IP address."
+	::= { snBgp4AttributeEntry 12 }
+
+-- Bgp4 Clear Neighbor Command Table
+
+snBgp4ClearNeighborCmdTable       OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4ClearNeighborCmdEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Clear Bgp4 command table."
+	::= { snBgp4ClearNeighborCmd 1 }
+
+snBgp4ClearNeighborCmdEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4ClearNeighborCmdEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the clear Bgp4 neighbor command table."
+	INDEX   { snBgp4ClearNeighborCmdIp }
+	::= { snBgp4ClearNeighborCmdTable 1 }
+
+SnBgp4ClearNeighborCmdEntry ::= SEQUENCE {
+	snBgp4ClearNeighborCmdIp
+		IpAddress,
+	snBgp4ClearNeighborCmdElement
+		INTEGER
+	}
+
+snBgp4ClearNeighborCmdIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry.
+		If the IP address is 255.255.255.255, it
+		means for all neighbors."
+	::= { snBgp4ClearNeighborCmdEntry 1 }
+
+snBgp4ClearNeighborCmdElement    OBJECT-TYPE
+	SYNTAX   INTEGER  {
+				valid(0),
+				lastPacketWithError(1),
+				notificationErrors(2),
+				softOutbound(3),
+				traffic(4),
+				neighbor(5)
+				}
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "To send the command element of this neighbor for value(1) to (5)
+	valid(0) is received in SNMP-get."
+	::= { snBgp4ClearNeighborCmdEntry 2 }
+
+-- Bgp4 Neighbor Prefix Group Table
+
+snBgp4NeighPrefixGroupTable    OBJECT-TYPE
+	SYNTAX  SEQUENCE OF SnBgp4NeighPrefixGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Bgp4 Neighbor Prefix Group table."
+	::= { snBgp4NeighPrefixGroup 1 }
+
+snBgp4NeighPrefixGroupEntry       OBJECT-TYPE
+	SYNTAX  SnBgp4NeighPrefixGroupEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the Bgp4 Prefix Group table."
+	INDEX   { snBgp4NeighPrefixGroupNeighIp, snBgp4NeighPrefixGroupDir }
+	::= { snBgp4NeighPrefixGroupTable 1 }
+
+SnBgp4NeighPrefixGroupEntry ::= SEQUENCE {
+	snBgp4NeighPrefixGroupNeighIp
+		IpAddress,
+	snBgp4NeighPrefixGroupDir
+		INTEGER,
+	snBgp4NeighPrefixGroupInAccessList
+		OCTET STRING,
+	snBgp4NeighPrefixGroupOutAccessList
+		OCTET STRING,
+	snBgp4NeighPrefixGroupRowStatus
+		INTEGER
+	}
+
+snBgp4NeighPrefixGroupNeighIp       OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The IP Address for a neighbor entry."
+	::= { snBgp4NeighPrefixGroupEntry 1 }
+
+snBgp4NeighPrefixGroupDir   OBJECT-TYPE
+	SYNTAX  INTEGER { out(0), in(1) }
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"The incoming/outgoing advertisements to which
+		the access list is applied."
+	::= { snBgp4NeighPrefixGroupEntry 2 }
+
+snBgp4NeighPrefixGroupInAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "An in access prefix list name. "
+	::= { snBgp4NeighPrefixGroupEntry 3 }
+
+snBgp4NeighPrefixGroupOutAccessList OBJECT-TYPE
+	SYNTAX  OCTET STRING (SIZE(0..32))
+	MAX-ACCESS   read-write
+	STATUS   current
+	DESCRIPTION
+	   "An out prefix list name. "
+	::= { snBgp4NeighPrefixGroupEntry 4 }
+
+snBgp4NeighPrefixGroupRowStatus   OBJECT-TYPE
+	SYNTAX	 INTEGER {
+		invalid(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+	}
+	MAX-ACCESS	 read-write
+	STATUS	 current
+	DESCRIPTION
+	"This object is used to create and
+	 delete row in the table and control
+	 if they are used. The values
+	 that can be written are:
+	 delete(3)...deletes the row
+	 create(4)...creates a new row
+	 modify(5)...modifies an exsisting row
+
+	 If the row exists, then a SET with
+	 value of create(4) returns error
+	 'badValue'. Deleted rows go away
+	 immediately. The following values
+	 can be returned on reads:
+	 noSuch(0)...no such row
+	 invalid(1)...Setting it to 'invalid' has the effect of
+			  rendering it inoperative..
+	 valid(2)....the row exists and is valid"
+	::= { snBgp4NeighPrefixGroupEntry 5 }
+END