Initial commitHEADmain

1 files changed, 528 insertions, 0 deletions

diff --git a/MIBS/brocade/FOUNDRY-SN-WIRELESS-GROUP-MIB b/MIBS/brocade/FOUNDRY-SN-WIRELESS-GROUP-MIB
new file mode 100644
index 0000000..5088150
--- /dev/null
+++ b/MIBS/brocade/FOUNDRY-SN-WIRELESS-GROUP-MIB
@@ -0,0 +1,528 @@
+FOUNDRY-SN-WIRELESS-GROUP-MIB DEFINITIONS ::= BEGIN
+
+-- SECTION 1: Top Level Definitions
+
+IMPORTS
+	MODULE-IDENTITY, OBJECT-TYPE, IpAddress,Integer32
+		FROM SNMPv2-SMI
+	MacAddress
+		FROM FOUNDRY-SN-AGENT-MIB
+	snSwitch
+		FROM FOUNDRY-SN-SWITCH-GROUP-MIB
+	TEXTUAL-CONVENTION
+		FROM SNMPv2-TC;
+
+snWireless MODULE-IDENTITY
+    LAST-UPDATED "201006020000Z"  -- 04 June 2010
+    ORGANIZATION "Brocade Communications Systems, Inc."
+    CONTACT-INFO
+             "Technical Support Center
+              130 Holger Way,
+              San Jose, CA  95134
+              Email:  ipsupport@brocade.com
+              Phone: 1-800-752-8061
+              URL:  www.brocade.com"
+    DESCRIPTION
+             "Copyright 1996-2010 Brocade Communications Systems, Inc.
+              All rights reserved.
+              This Brocade Communications Systems SNMP Management Information Base Specification
+              embodies Brocade Communications Systems' confidential and proprietary
+              intellectual property. Brocade Communications Systems retains all
+              title and ownership in the Specification, including any revisions.
+
+              This Specification is supplied AS IS, and Brocade Communications Systems makes
+              no warranty, either express or implied, as to the use,
+              operation, condition, or performance of the specification, and any unintended
+              consequence it may on the user environment."
+
+    REVISION        "201006020000Z"  -- 04 June 2010
+    DESCRIPTION
+        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
+
+    REVISION     "200909300000Z" -- September 30, 2009
+    DESCRIPTION
+			"convert from SMIv1 to SMIv2"
+   ::= {snSwitch  23}
+
+-- textual conventions
+
+	IfIndexList ::= TEXTUAL-CONVENTION
+		STATUS      current
+		DESCRIPTION
+			"Each octet within this value specifies a set of eight
+			interfaces by their ifIndex values, with the first octet
+			specifying interfaces 1 through 8, the second octet
+			specifying interfaces 9 through 16, etc.  Within each
+			octet, the most significant bit represents the lowest
+			numbered interface, and the least significant bit
+			represents the highest numbered interface.  Thus, each
+			interface of the device is represented by a single bit
+			within the value of this object.  If that bit has a value
+			of '1' then that interface is included in the set of
+			interfaces; the interface is not included if its bit has a
+			value of '0'."
+		SYNTAX      OCTET STRING
+
+-- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).foundry(1991)
+
+wgGroup     OBJECT IDENTIFIER ::= { snWireless 1 }
+
+wgMobilityId OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Unique Identifier used to specify the mobility doamin.
+		 Valid range is <1 - 65535>. Use <0> to remove the domain."
+	::= { wgGroup 1 }
+
+wgVpnPTDeletePolicy OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Write a valid VPN pass through policy ID to remove the policy.
+		Return zero when reading this object."
+	::= { wgGroup 2 }
+
+
+--
+-- WiFi Interface Table
+--
+
+wgIfTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF WgIfEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"WiFi Interface Table."
+	::= { snWireless 2 }
+
+wgIfEntry OBJECT-TYPE
+	SYNTAX WgIfEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"An entry of the WiFi Interface Table."
+	INDEX { wgIfIndex }
+	::= { wgIfTable 1 }
+
+WgIfEntry ::= SEQUENCE {
+	wgIfIndex                 Integer32,
+	wgIfWirelessEnable        INTEGER,
+	wgIfPnPLearnNewAP         INTEGER,
+	wgIfAutoPortDisable       INTEGER,
+	wgIfVpnPTPolicyId         Integer32,
+	wgIfFullCompRoamingEnable INTEGER
+}
+
+wgIfIndex OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"ifIndex value of the switch interface."
+	::= { wgIfEntry 1 }
+
+wgIfWirelessEnable OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		enable(2),
+		disable(3)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Control wireless function of the switch interface."
+	DEFVAL { disable }
+	::= { wgIfEntry 2 }
+
+wgIfPnPLearnNewAP OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		enable(2),
+		disable(3)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Control the interface to learn new AP."
+	::= { wgIfEntry 3 }
+
+wgIfAutoPortDisable  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		enable(2),
+		disable(3)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Disable the interface if the interface link status change."
+	::= { wgIfEntry 4 }
+
+wgIfVpnPTPolicyId OBJECT-TYPE
+	SYNTAX Integer32
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"To bind an interface to a VPN pass through policy, write
+		a valid policy number which is larger than zero. To unbind
+		an interface to a VPN pass through policy, write a zero."
+	::= { wgIfEntry 5 }
+
+wgIfFullCompRoamingEnable OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		enable(2),
+		disable(3)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Control full compatibility roaming of an interface."
+	DEFVAL { disable }
+	::= { wgIfEntry 6 }
+
+
+--
+-- Roaming Peer table
+--
+
+wgRoamingPeerTable OBJECT-TYPE
+	SYNTAX  SEQUENCE OF WgRoamingPeerEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"Roaming Peer table contains information of peers."
+	::= { snWireless 3 }
+
+wgRoamingPeerEntry OBJECT-TYPE
+	SYNTAX  WgRoamingPeerEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry of the roaming peer table."
+	INDEX   { wgRoamingPeerIpAddress }
+	::= { wgRoamingPeerTable 1 }
+
+WgRoamingPeerEntry ::= SEQUENCE {
+	wgRoamingPeerIpAddress
+		IpAddress,
+	wgRoamingPeerConnectionStatus
+		INTEGER,
+	wgRoamingPeerRowStatus
+		INTEGER
+	}
+
+wgRoamingPeerIpAddress OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"IP Address of the ISRP peer."
+	::= { wgRoamingPeerEntry 1 }
+
+wgRoamingPeerConnectionStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		configured(2),
+		established(3)
+		}
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"Shows the state of the ISRP Connection."
+	::= { wgRoamingPeerEntry 2 }
+
+wgRoamingPeerRowStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		valid(2),
+		delete(3),
+		create(4)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Shows the state of the row in the PeerRow Table."
+	::= { wgRoamingPeerEntry 3 }
+
+
+--
+-- AP Plug and Play Table
+--
+
+wgPnPTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF WgPnPEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"AP Plug and Play Table."
+	::= { snWireless 4 }
+
+wgPnPEntry OBJECT-TYPE
+	SYNTAX WgPnPEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"An entry of the AP Plug and Play Table."
+	INDEX { wgPnPIfIndex, wgPnPMacAddress }
+	::= { wgPnPTable 1 }
+
+WgPnPEntry ::= SEQUENCE {
+	wgPnPIfIndex             Integer32,
+	wgPnPMacAddress          MacAddress,
+	wgPnPIpAddress           IpAddress,
+	wgPnPIpMask              IpAddress,
+	wgPnPIpDefaultGw         IpAddress,
+	wgPnPStatus              INTEGER,
+	wgPnPRowStatus           INTEGER
+}
+
+wgPnPIfIndex OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"ifIndex value of the switch interface."
+	::= { wgPnPEntry 1 }
+
+wgPnPMacAddress OBJECT-TYPE
+	SYNTAX  MacAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"MAC address of the attached AP."
+	::= { wgPnPEntry 2 }
+
+wgPnPIpAddress OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"IP address of the attached AP."
+	::= { wgPnPEntry 3 }
+
+wgPnPIpMask OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Subnet mask of the attached AP."
+	::= { wgPnPEntry 4 }
+
+wgPnPIpDefaultGw OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Default gateway of the attached AP."
+	::= { wgPnPEntry 5 }
+
+wgPnPStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		discovered(2),
+		configured(3),
+		operational(4)
+		}
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"AP device status. If the switch diecovered a new AP which
+		had not been configured, the 'discovered' state will return.
+		If the AP's IP address, subnet mask and default gateway were
+		configured to the switch port but the AP with the matching
+		MAC address had not attached to the switch port, 'configured'
+		state will return. If the AP's IP address, subnet mask and
+		default gateway were configured to the switch port and the
+		AP with the matching MAC address had attached to the switch
+		port and was operating, 'operational' state will return."
+	::= { wgPnPEntry 6 }
+
+wgPnPRowStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		valid(2),
+		delete(3),
+		create(4),
+		modify(5)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Create, delete or modify a row of AP Plug and Play Table."
+	::= { wgPnPEntry 7 }
+
+--
+-- VPN Pass Through Server Table
+--
+
+wgVpnPTServerTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF WgVpnPTServerEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"VPN pass through server table"
+	::= { snWireless 5 }
+
+wgVpnPTServerEntry OBJECT-TYPE
+	SYNTAX WgVpnPTServerEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"An entry of the VPN pass through server table."
+	INDEX { wgVpnPTServerPolicyId, wgVpnPTServerIpAddress }
+	::= { wgVpnPTServerTable 1 }
+
+WgVpnPTServerEntry ::= SEQUENCE {
+	wgVpnPTServerPolicyId       Integer32,
+	wgVpnPTServerIpAddress      IpAddress,
+	wgVpnPTServerRowStatus      INTEGER
+}
+
+wgVpnPTServerPolicyId OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"VPN pass through policy identifier. It must be greater than zero."
+	::= { wgVpnPTServerEntry 1 }
+
+wgVpnPTServerIpAddress OBJECT-TYPE
+	SYNTAX  IpAddress
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"VPN server IP address."
+	::= { wgVpnPTServerEntry 2 }
+
+wgVpnPTServerRowStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		valid(2),
+		delete(3),
+		create(4)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Create or delete a row of VPN pass through server table."
+	::= { wgVpnPTServerEntry 3 }
+
+
+--
+-- VPN Pass Through Filter Table
+--
+
+wgVpnPTFilterTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF WgVpnPTFilterEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"VPN pass through filter table"
+	::= { snWireless 6 }
+
+wgVpnPTFilterEntry OBJECT-TYPE
+	SYNTAX WgVpnPTFilterEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"An entry of the VPN pass through filter table."
+	INDEX { wgVpnPTFilterPolicyId, wgVpnPTFilterProtocol, wgVpnPTFilterPort }
+	::= { wgVpnPTFilterTable 1 }
+
+WgVpnPTFilterEntry ::= SEQUENCE {
+	wgVpnPTFilterPolicyId       Integer32,
+	wgVpnPTFilterProtocol       INTEGER,
+	wgVpnPTFilterPort           Integer32,
+	wgVpnPTFilterRowStatus      INTEGER
+}
+
+wgVpnPTFilterPolicyId OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"VPN pass through policy identifier. It must be greater than zero."
+	::= { wgVpnPTFilterEntry 1 }
+
+wgVpnPTFilterProtocol OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		udp(2),
+		tcp(3)
+		}
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"Allow this type of protocol to pass through."
+	::= { wgVpnPTFilterEntry 2 }
+
+wgVpnPTFilterPort OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"Allow this protocol port to pass through."
+	::= { wgVpnPTFilterEntry 3 }
+
+wgVpnPTFilterRowStatus OBJECT-TYPE
+	SYNTAX  INTEGER {
+		other(1),
+		valid(2),
+		delete(3),
+		create(4)
+		}
+	MAX-ACCESS  read-write
+	STATUS  current
+	DESCRIPTION
+		"Create or delete a row of VPN pass through filter table."
+	::= { wgVpnPTFilterEntry 4 }
+
+--
+-- VPN Pass Through Policy Table
+--
+
+wgVpnPTPolicyTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF WgVpnPTPolicyEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"VPN pass through policy table"
+	::= { snWireless 7 }
+
+wgVpnPTPolicyEntry OBJECT-TYPE
+	SYNTAX WgVpnPTPolicyEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+		"An entry of the VPN pass through policy table."
+	INDEX { wgVpnPTPolicyId }
+	::= { wgVpnPTPolicyTable 1 }
+
+WgVpnPTPolicyEntry ::= SEQUENCE {
+	wgVpnPTPolicyId        Integer32,
+	wgVpnPTPolicyPortList  IfIndexList
+}
+
+wgVpnPTPolicyId OBJECT-TYPE
+	SYNTAX  Integer32
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"VPN pass through policy identifier. It must be greater than zero."
+	::= { wgVpnPTPolicyEntry 1 }
+
+wgVpnPTPolicyPortList OBJECT-TYPE
+	SYNTAX  IfIndexList
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+		"A list of ports bound to this VPN pass through policy."
+	::= { wgVpnPTPolicyEntry 2 }
+
+END
+
+