Initial commitHEADmain

1 files changed, 219 insertions, 0 deletions

diff --git a/MIBS/calix/OCCAM-ETHERLIKE-MIB b/MIBS/calix/OCCAM-ETHERLIKE-MIB
new file mode 100644
index 0000000..fe3a9a7
--- /dev/null
+++ b/MIBS/calix/OCCAM-ETHERLIKE-MIB
@@ -0,0 +1,219 @@
+--This MIB has been extrcted from RFC 2665
+OCCAM-ETHERLIKE-MIB	DEFINITIONS ::= BEGIN
+	IMPORTS
+        occamGenericEtherlikeModules, occamGenericInterfaceModules
+			FROM OCCAM-REG-MODULE
+		MODULE-COMPLIANCE, OBJECT-GROUP
+			FROM SNMPv2-CONF
+		ifIndex, InterfaceIndex
+			FROM IF-MIB
+		MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, 
+                mib-2, transmission, enterprises
+			FROM SNMPv2-SMI;
+
+	etherMIB	MODULE-IDENTITY
+		LAST-UPDATED	"200104271051Z"
+		ORGANIZATION	"Occam Networks"
+		CONTACT-INFO    "email support@occamnetworks.com"
+
+		DESCRIPTION		
+				"The MIB module to describe generic 
+                                objects for Ethernet-like network 
+                                interfaces.
+				
+				The following reference is used 
+                                throughout this MIB module:
+				
+				[IEEE 802.3 Std] refers to:
+				IEEE Std 802.3, 1998 Edition:'Information
+				technology - Telecommunications and
+				information exchange between systems -
+				Local and metropolitan area networks -
+				Specific requirements - Part 3: Carrier
+				sense multiple access with collision
+				detection (CSMA/CD) access method and
+				physical layer specifications',
+				September 1998.
+				
+				Of particular interest is Clause 30, 
+                                '10Mb/s,100Mb/s and 1000Mb/s Management'."
+
+                REVISION        "200104271051Z"
+		DESCRIPTION	"MODULE-IDENTITY update."
+
+                REVISION        "9908240400Z"
+		DESCRIPTION	"Updated to include support for 1000 Mb/sec
+				interfaces and full-duplex interfaces.
+				This version published as RFC 2665."
+		REVISION	"9806032150Z"
+		DESCRIPTION		
+				"Updated to include support for 100 Mb/sec
+				interfaces.
+				This version published as RFC 2358."
+		REVISION	"9402030400Z"
+		DESCRIPTION		
+				"Initial version, published as RFC 1650."
+		::=  { occamGenericEtherlikeModules 1 }
+
+	org	OBJECT IDENTIFIER
+		::=  {  iso  3  }
+
+	dod	OBJECT IDENTIFIER
+		::=  {  org  6  }
+
+	internet	OBJECT IDENTIFIER
+		::=  {  dod  1  }
+
+	mgmt	OBJECT IDENTIFIER
+		::=  {  internet  2  }
+
+
+	etherMIBObjects	OBJECT IDENTIFIER
+		::=  {  etherMIB  1  }
+
+        dot3 OBJECT IDENTIFIER ::= { etherMIBObjects 7 }  
+
+
+-- conformance information
+-- placeholders
+
+	etherConformance	OBJECT IDENTIFIER
+		::=  {  etherMIB  2  }
+
+
+-- the Ethernet-like Statistics group
+	dot3StatsTable	OBJECT-TYPE
+		SYNTAX		SEQUENCE  OF  Dot3StatsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION	
+			"Statistics for a collection of ethernet-like
+			interfaces attached to a particular system.
+			There will be one row in this table for each
+			ethernet-like interface in the system."
+		::=  { dot3  2 }
+
+	dot3StatsEntry	OBJECT-TYPE
+		SYNTAX		Dot3StatsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION	
+			"Statistics for a particular interface to an
+			ethernet-like medium."
+		INDEX		{  dot3StatsIndex  }
+		::=  { dot3StatsTable 1 }
+
+	Dot3StatsEntry  ::=  SEQUENCE {
+		dot3StatsIndex  InterfaceIndex,
+		dot3StatsSingleCollisionFrames  Counter32,
+		dot3StatsFrameTooLongs  Counter32
+		}
+
+
+	dot3StatsIndex	OBJECT-TYPE	
+		SYNTAX			InterfaceIndex
+		MAX-ACCESS		read-only
+		STATUS			current
+		DESCRIPTION		
+			"An index value that uniquely identifies
+                        an interface to an ethernet-like medium.
+                        The interface identified by a particular
+                        value of this index is the same interface
+                        as identified by the same value of 
+                        ifIndex."
+		REFERENCE	"RFC 2233, ifIndex"
+		::=  {  dot3StatsEntry  1  }
+
+
+
+--	dot3StatsAlignmentErrors	{  dot3StatsEntry  2  }
+--	dot3StatsFCSErrors	{  dot3StatsEntry  3  }
+
+	dot3StatsSingleCollisionFrames	OBJECT-TYPE	
+		SYNTAX			Counter32
+		MAX-ACCESS		read-only
+		STATUS			current
+		DESCRIPTION		
+                        "A count of successfully transmitted frames on
+                        a particular interface for which transmission
+                        is inhibited by exactly one collision.
+				
+                        A frame that is counted by an instance of this
+                        object is also counted by the corresponding
+                        instance of either the ifOutUcastPkts,
+                        ifOutMulticastPkts, or ifOutBroadcastPkts,
+                        and is not counted by the corresponding
+                        instance of the dot3StatsMultipleCollisionFrames
+                        object.
+				
+			This counter does not increment when the
+			interface is operating in full-duplex mode.
+				
+			Discontinuities in the value of this counter can
+			occur at re-initialization of the management
+			system, and at other times as indicated by the
+			value of ifCounterDiscontinuityTime."
+		REFERENCE		"[IEEE 802.3 Std.], 30.3.1.1.3,

+                       aSingleCollisionFrames."
+		::=  {  dot3StatsEntry  4  }
+
+
+
+--	dot3StatsMultipleCollisionFrames {  dot3StatsEntry  5  }
+--	dot3StatsSQETestErrors  {  dot3StatsEntry  6  }
+--	dot3StatsDeferredTransmissions {  dot3StatsEntry  7  }
+--	dot3StatsLateCollisions  {  dot3StatsEntry  8  }
+--	dot3StatsExcessiveCollisions {  dot3StatsEntry  9  }
+--	dot3StatsInternalMacTransmitErrors {  dot3StatsEntry  10  }
+--	dot3StatsCarrierSenseErrors {  dot3StatsEntry  11  }
+-- { dot3StatsEntry 12 } is not assigned

+
+	dot3StatsFrameTooLongs	OBJECT-TYPE	
+		SYNTAX			Counter32
+		MAX-ACCESS		read-only
+		STATUS			current
+		DESCRIPTION		
+			"A count of frames received on a particular
+			interface that exceed the maximum permitted
+			frame size.
+				
+			The count represented by an instance of this
+			object is incremented when the frameTooLong
+			status is returned by the MAC service to the
+			LLC (or other MAC user). Received frames for
+			which multiple error conditions obtain are,
+			according to the conventions of IEEE 802.3
+			Layer Management, counted exclusively according
+			to the error status presented to the LLC.
+				
+			Discontinuities in the value of this counter can
+			occur at re-initialization of the management
+			system, and at other times as indicated by the
+			value of ifCounterDiscontinuityTime."
+		REFERENCE		"[IEEE 802.3 Std.], 30.3.1.1.25,

+                       aFrameTooLongErrors."
+		::=  {  dot3StatsEntry  13  }
+
+
+-- { dot3StatsEntry 14 } is not assigned

+-- { dot3StatsEntry 15 } is not assigned

+--	dot3StatsInternalMacReceiveErrors {  dot3StatsEntry  16  }
+--	dot3StatsEtherChipSet  {  dot3StatsEntry  17  }
+--	dot3StatsSymbolErrors  {  dot3StatsEntry  18  }
+--	dot3StatsDuplexStatus  {  dot3StatsEntry  19  }
+--  802.3 Tests
+--  serves as placeHolders
+
+	dot3Tests	OBJECT IDENTIFIER
+		::=  {  dot3  6  }
+
+	dot3Errors	OBJECT IDENTIFIER
+		::=  {  dot3  7  }
+
+	etherGroups	OBJECT IDENTIFIER
+		::=  {  etherConformance  1  }
+
+	etherCompliances	OBJECT IDENTIFIER
+		::=  {  etherConformance  2  }
+
+END